=============== Log rollover at Sat Nov 18 15:48:29 2023 ===============
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-311-g9e765dae'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sat Nov 18 15:48:30 2023 (1700351310.3 784953.1)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
webhooks client 547637125568: New connection
webhooks client 547637125568: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
Loaded MCU 'mcu' 105 commands (v0.11.0-105-g1e7057e9 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0=P0.28,P0.27 BUS_PINS_i2c1=P0.1,P0.0 BUS_PINS_i2c1a=P0.20,P0.19 BUS_PINS_i2c2=P0.11,P0.10 BUS_PINS_ssp0=P0.17,P0.18,P0.15 BUS_PINS_ssp1=P0.8,P0.9,P0.7 CLOCK_FREQ=120000000 MCU=lpc1769 PWM_MAX=255 RESERVE_PINS_USB=P0.30,P0.29,P2.9 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (0.0, 10.0)     | (27.0, 5.0)
  1   | (35.5, 10.0)    | (62.5, 5.0)
  2   | (71.0, 10.0)    | (98.0, 5.0)
  3   | (106.5, 10.0)   | (133.5, 5.0)
  4   | (142.0, 10.0)   | (169.0, 5.0)
  5   | (177.5, 10.0)   | (204.5, 5.0)
  6   | (213.0, 10.0)   | (240.0, 5.0)
  7   | (213.0, 58.8)   | (240.0, 53.8)
  8   | (177.5, 58.8)   | (204.5, 53.8)
  9   | (142.0, 58.8)   | (169.0, 53.8)
  10  | (106.5, 58.8)   | (133.5, 53.8)
  11  | (71.0, 58.8)    | (98.0, 53.8)
  12  | (35.5, 58.8)    | (62.5, 53.8)
  13  | (0.0, 58.8)     | (27.0, 53.8)
  14  | (0.0, 107.5)    | (27.0, 102.5)
  15  | (35.5, 107.5)   | (62.5, 102.5)
  16  | (71.0, 107.5)   | (98.0, 102.5)
  17  | (106.5, 107.5)  | (133.5, 102.5)
  18  | (142.0, 107.5)  | (169.0, 102.5)
  19  | (177.5, 107.5)  | (204.5, 102.5)
  20  | (213.0, 107.5)  | (240.0, 102.5)
  21  | (213.0, 156.2)  | (240.0, 151.2)
  22  | (177.5, 156.2)  | (204.5, 151.2)
  23  | (142.0, 156.2)  | (169.0, 151.2)
  24  | (106.5, 156.2)  | (133.5, 151.2)
  25  | (71.0, 156.2)   | (98.0, 151.2)
  26  | (35.5, 156.2)   | (62.5, 151.2)
  27  | (0.0, 156.2)    | (27.0, 151.2)
  28  | (0.0, 205.0)    | (27.0, 200.0)
  29  | (35.5, 205.0)   | (62.5, 200.0)
  30  | (71.0, 205.0)   | (98.0, 200.0)
  31  | (106.5, 205.0)  | (133.5, 200.0)
  32  | (142.0, 205.0)  | (169.0, 200.0)
  33  | (177.5, 205.0)  | (204.5, 200.0)
  34  | (213.0, 205.0)  | (240.0, 200.0)
Starting heater checks for extruder
Starting heater checks for heater_bed
Stats 784961.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2844 bytes_read=5977 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119927739 heater_bed: target=0 temp=0.0 pwm=0.000  sysload=0.21 cputime=2.009 memavail=7296416 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 547637125568
webhooks: registering remote method 'reboot_machine' for connection id: 547637125568
webhooks: registering remote method 'pause_job_queue' for connection id: 547637125568
webhooks: registering remote method 'start_job_queue' for connection id: 547637125568
webhooks: registering remote method 'timelapse_newframe' for connection id: 547637125568
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 547637125568
webhooks: registering remote method 'timelapse_render' for connection id: 547637125568
webhooks: registering remote method 'publish_mqtt_topic' for connection id: 547637125568
webhooks: registering remote method 'notify' for connection id: 547637125568
webhooks: registering remote method 'set_device_power' for connection id: 547637125568
Stats 784962.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2858 bytes_read=6098 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119989004 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.21 cputime=2.074 memavail=7296168 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784963.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2864 bytes_read=6219 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119982930 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.21 cputime=2.095 memavail=7295668 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784964.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2870 bytes_read=6355 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119982587 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.20 cputime=2.109 memavail=7295672 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784965.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2876 bytes_read=6461 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119983293 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.20 cputime=2.120 memavail=7295672 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784966.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2882 bytes_read=6582 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119986892 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.20 cputime=2.138 memavail=7295672 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784967.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2888 bytes_read=6703 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119987053 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.20 cputime=2.151 memavail=7295672 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784968.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2894 bytes_read=6809 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119987353 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.20 cputime=2.166 memavail=7295672 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784969.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2900 bytes_read=6944 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119987813 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.18 cputime=2.181 memavail=7295672 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784970.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2906 bytes_read=7065 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119988288 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.18 cputime=2.194 memavail=7295456 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784971.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2912 bytes_read=7171 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119989689 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.18 cputime=2.212 memavail=7295456 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784972.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2918 bytes_read=7292 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119989783 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.18 cputime=2.225 memavail=7295456 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784973.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2924 bytes_read=7413 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119989897 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.18 cputime=2.244 memavail=7295204 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784974.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2930 bytes_read=7533 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119990059 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.17 cputime=2.264 memavail=7295204 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784975.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2936 bytes_read=7654 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119990202 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.17 cputime=2.279 memavail=7295204 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784976.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2942 bytes_read=7775 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119990336 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.17 cputime=2.292 memavail=7295204 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784977.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2948 bytes_read=7881 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119990560 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.17 cputime=2.304 memavail=7295204 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784978.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2954 bytes_read=8002 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119990691 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.17 cputime=2.322 memavail=7295204 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784979.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2960 bytes_read=8123 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119990840 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.15 cputime=2.336 memavail=7295204 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784980.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2966 bytes_read=8243 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119991277 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.15 cputime=2.352 memavail=7295204 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784981.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2972 bytes_read=8364 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119991352 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.15 cputime=2.362 memavail=7295204 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784982.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2978 bytes_read=8485 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119991418 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.15 cputime=2.375 memavail=7295204 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 784983.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2984 bytes_read=8591 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119991537 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.15 cputime=2.390 memavail=7301128 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784984.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2990 bytes_read=8712 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119991613 heater_bed: target=0 temp=20.6 pwm=0.000  sysload=0.14 cputime=2.401 memavail=7301132 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784985.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2996 bytes_read=8847 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119991672 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.14 cputime=2.411 memavail=7301132 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784986.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3002 bytes_read=8953 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119991742 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.14 cputime=2.423 memavail=7301136 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784987.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3008 bytes_read=9074 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119991795 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.14 cputime=2.435 memavail=7301136 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784988.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3014 bytes_read=9195 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119991864 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.14 cputime=2.446 memavail=7301136 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784989.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3020 bytes_read=9301 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992208 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.13 cputime=2.459 memavail=7301136 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784990.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3026 bytes_read=9429 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992228 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.13 cputime=2.471 memavail=7300912 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784991.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3032 bytes_read=9542 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992242 heater_bed: target=0 temp=20.6 pwm=0.000  sysload=0.13 cputime=2.485 memavail=7300912 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784992.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3038 bytes_read=9647 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992306 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.13 cputime=2.497 memavail=7300912 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784993.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3044 bytes_read=9768 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992335 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.13 cputime=2.508 memavail=7300660 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784994.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3050 bytes_read=9889 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992355 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.12 cputime=2.518 memavail=7300660 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 784995.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3056 bytes_read=10009 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992378 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.12 cputime=2.538 memavail=7300660 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 784996.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3062 bytes_read=10130 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992402 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.12 cputime=2.558 memavail=7300212 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 784997.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3074 bytes_read=10267 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992619 heater_bed: target=0 temp=20.6 pwm=0.000  sysload=0.12 cputime=2.576 memavail=7300212 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 784998.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3080 bytes_read=10373 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992627 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.12 cputime=2.589 memavail=7300212 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 784999.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3086 bytes_read=10494 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992638 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.35 cputime=2.606 memavail=7300212 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785000.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3092 bytes_read=10629 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992661 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.35 cputime=2.621 memavail=7300212 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785001.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3098 bytes_read=10735 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.35 cputime=2.634 memavail=7300212 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785002.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3104 bytes_read=10856 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992775 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.35 cputime=2.644 memavail=7300212 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785003.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3110 bytes_read=10977 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992801 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.35 cputime=2.658 memavail=7299988 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785004.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3116 bytes_read=11083 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992810 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.32 cputime=2.668 memavail=7299996 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785005.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3122 bytes_read=11218 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=0 temp=20.6 pwm=0.000  sysload=0.32 cputime=2.678 memavail=7299996 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785006.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3128 bytes_read=11339 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.32 cputime=2.688 memavail=7299996 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785007.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3134 bytes_read=11445 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.32 cputime=2.703 memavail=7299996 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785008.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3140 bytes_read=11566 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992840 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.32 cputime=2.718 memavail=7299996 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 785009.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3146 bytes_read=11687 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.29 cputime=2.733 memavail=7299996 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785010.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3152 bytes_read=11807 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992961 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.29 cputime=2.745 memavail=7299996 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785011.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3158 bytes_read=11928 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992962 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.29 cputime=2.764 memavail=7299996 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785012.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3164 bytes_read=12049 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992964 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.29 cputime=2.778 memavail=7299996 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785013.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3170 bytes_read=12155 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992969 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.29 cputime=2.792 memavail=7299996 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
TMC 'stepper_z' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z1' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z' reports GSTAT:      00000000
TMC 'stepper_z1' reports GSTAT:      00000000
Stats 785253.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=5849 bytes_read=41587 bytes_retransmit=9 bytes_invalid=0 send_seq=599 receive_seq=599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993436 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.17 cputime=6.173 memavail=7290296 print_time=299.796 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
TMC 'stepper_x' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_x' reports GSTAT:      00000000
Stats 785254.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=7099 bytes_read=42824 bytes_retransmit=9 bytes_invalid=0 send_seq=672 receive_seq=672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993426 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.16 cputime=6.278 memavail=7290044 print_time=300.432 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
TMC 'stepper_y' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 785255.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=7742 bytes_read=43620 bytes_retransmit=9 bytes_invalid=0 send_seq=718 receive_seq=718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993419 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.16 cputime=6.374 memavail=7296556 print_time=301.432 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 785256.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=8740 bytes_read=44329 bytes_retransmit=9 bytes_invalid=0 send_seq=763 receive_seq=763 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993419 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.16 cputime=6.479 memavail=7296696 print_time=303.003 buffer_time=0.771 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785257.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=8866 bytes_read=44619 bytes_retransmit=9 bytes_invalid=0 send_seq=772 receive_seq=772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=119993424 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.16 cputime=6.522 memavail=7296696 print_time=303.003 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785258.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=9165 bytes_read=45116 bytes_retransmit=9 bytes_invalid=0 send_seq=793 receive_seq=793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=119993425 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.16 cputime=6.588 memavail=7296696 print_time=304.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785259.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=9672 bytes_read=45538 bytes_retransmit=9 bytes_invalid=0 send_seq=817 receive_seq=817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993420 heater_bed: target=0 temp=21.0 pwm=0.000  sysload=0.31 cputime=6.637 memavail=7296696 print_time=305.397 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785260.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=10315 bytes_read=46103 bytes_retransmit=9 bytes_invalid=0 send_seq=853 receive_seq=853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993453 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.31 cputime=6.699 memavail=7296696 print_time=306.397 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 785261.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=10968 bytes_read=46707 bytes_retransmit=9 bytes_invalid=0 send_seq=891 receive_seq=891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993449 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.31 cputime=6.766 memavail=7296696 print_time=307.397 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 785262.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=11638 bytes_read=47307 bytes_retransmit=9 bytes_invalid=0 send_seq=931 receive_seq=931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993442 heater_bed: target=0 temp=21.0 pwm=0.000  sysload=0.31 cputime=6.839 memavail=7296632 print_time=308.397 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785263.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=12302 bytes_read=47887 bytes_retransmit=9 bytes_invalid=0 send_seq=968 receive_seq=967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993439 heater_bed: target=0 temp=21.0 pwm=0.000  sysload=0.31 cputime=6.906 memavail=7296724 print_time=309.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 785264.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=12960 bytes_read=48482 bytes_retransmit=9 bytes_invalid=0 send_seq=1007 receive_seq=1006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993438 heater_bed: target=0 temp=21.0 pwm=0.000  sysload=0.28 cputime=6.966 memavail=7300036 print_time=310.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 785265.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=13603 bytes_read=49067 bytes_retransmit=9 bytes_invalid=0 send_seq=1043 receive_seq=1043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993433 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.28 cputime=7.025 memavail=7300036 print_time=311.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 785266.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=14251 bytes_read=49637 bytes_retransmit=9 bytes_invalid=0 send_seq=1080 receive_seq=1080 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993428 heater_bed: target=0 temp=21.0 pwm=0.000  sysload=0.28 cputime=7.087 memavail=7300036 print_time=312.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 785267.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=14899 bytes_read=50222 bytes_retransmit=9 bytes_invalid=0 send_seq=1117 receive_seq=1117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993424 heater_bed: target=0 temp=21.1 pwm=0.000  sysload=0.28 cputime=7.152 memavail=7300036 print_time=313.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785268.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=15557 bytes_read=50832 bytes_retransmit=9 bytes_invalid=0 send_seq=1156 receive_seq=1156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993421 heater_bed: target=0 temp=21.0 pwm=0.000  sysload=0.28 cputime=7.218 memavail=7300036 print_time=314.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 785269.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=16215 bytes_read=51412 bytes_retransmit=9 bytes_invalid=0 send_seq=1195 receive_seq=1195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993446 heater_bed: target=0 temp=21.0 pwm=0.000  sysload=0.26 cputime=7.285 memavail=7300036 print_time=315.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 785270.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=16863 bytes_read=51997 bytes_retransmit=9 bytes_invalid=0 send_seq=1232 receive_seq=1232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993444 heater_bed: target=0 temp=21.1 pwm=0.000  sysload=0.26 cputime=7.349 memavail=7300036 print_time=316.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.1 pwm=0.000
Stats 785271.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=17516 bytes_read=52587 bytes_retransmit=9 bytes_invalid=0 send_seq=1270 receive_seq=1270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993443 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.26 cputime=7.409 memavail=7300036 print_time=317.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785272.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=18174 bytes_read=53167 bytes_retransmit=9 bytes_invalid=0 send_seq=1309 receive_seq=1309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993437 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.26 cputime=7.472 memavail=7300036 print_time=318.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 785273.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=18832 bytes_read=53777 bytes_retransmit=9 bytes_invalid=0 send_seq=1348 receive_seq=1348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993434 heater_bed: target=0 temp=21.0 pwm=0.000  sysload=0.26 cputime=7.534 memavail=7300036 print_time=319.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 785274.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=19485 bytes_read=54367 bytes_retransmit=9 bytes_invalid=0 send_seq=1386 receive_seq=1386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993430 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.40 cputime=7.595 memavail=7299284 print_time=320.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.0 pwm=0.000
Stats 785275.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=20398 bytes_read=54909 bytes_retransmit=9 bytes_invalid=0 send_seq=1419 receive_seq=1419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993435 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.40 cputime=7.657 memavail=7299288 print_time=321.438 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785276.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=20934 bytes_read=55501 bytes_retransmit=9 bytes_invalid=0 send_seq=1453 receive_seq=1453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993434 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.40 cputime=7.728 memavail=7299292 print_time=321.985 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785277.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=21498 bytes_read=55988 bytes_retransmit=9 bytes_invalid=0 send_seq=1477 receive_seq=1477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993428 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.40 cputime=7.776 memavail=7299040 print_time=323.417 buffer_time=0.169 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785278.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=21616 bytes_read=56290 bytes_retransmit=9 bytes_invalid=0 send_seq=1486 receive_seq=1486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993474 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.40 cputime=7.820 memavail=7291484 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785279.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=21734 bytes_read=56595 bytes_retransmit=9 bytes_invalid=0 send_seq=1495 receive_seq=1495 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993467 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.45 cputime=7.867 memavail=7299884 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785280.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=21852 bytes_read=56900 bytes_retransmit=9 bytes_invalid=0 send_seq=1504 receive_seq=1504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993466 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.45 cputime=7.908 memavail=7300020 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785281.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=21970 bytes_read=57190 bytes_retransmit=9 bytes_invalid=0 send_seq=1513 receive_seq=1513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993459 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.45 cputime=7.953 memavail=7300020 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785282.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=22088 bytes_read=57495 bytes_retransmit=9 bytes_invalid=0 send_seq=1522 receive_seq=1522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993454 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.45 cputime=7.993 memavail=7300020 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785283.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=22206 bytes_read=57815 bytes_retransmit=9 bytes_invalid=0 send_seq=1531 receive_seq=1531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993478 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.45 cputime=8.029 memavail=7300020 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785284.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=22324 bytes_read=58105 bytes_retransmit=9 bytes_invalid=0 send_seq=1540 receive_seq=1540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993473 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.41 cputime=8.072 memavail=7300536 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785285.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=22442 bytes_read=58410 bytes_retransmit=9 bytes_invalid=0 send_seq=1549 receive_seq=1549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993470 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.41 cputime=8.111 memavail=7300552 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785286.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=22560 bytes_read=58715 bytes_retransmit=9 bytes_invalid=0 send_seq=1558 receive_seq=1558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993469 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.41 cputime=8.151 memavail=7300552 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785287.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=22678 bytes_read=59005 bytes_retransmit=9 bytes_invalid=0 send_seq=1567 receive_seq=1567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993501 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.41 cputime=8.197 memavail=7300556 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785288.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=22796 bytes_read=59340 bytes_retransmit=9 bytes_invalid=0 send_seq=1576 receive_seq=1576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993495 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.41 cputime=8.234 memavail=7300556 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785289.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=22914 bytes_read=59630 bytes_retransmit=9 bytes_invalid=0 send_seq=1585 receive_seq=1585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993487 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.46 cputime=8.273 memavail=7300556 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785290.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=23032 bytes_read=59920 bytes_retransmit=9 bytes_invalid=0 send_seq=1594 receive_seq=1594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993481 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.46 cputime=8.309 memavail=7300556 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785291.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=23150 bytes_read=60240 bytes_retransmit=9 bytes_invalid=0 send_seq=1603 receive_seq=1603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993478 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.46 cputime=8.348 memavail=7300556 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785292.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=23268 bytes_read=60530 bytes_retransmit=9 bytes_invalid=0 send_seq=1612 receive_seq=1612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993474 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.46 cputime=8.386 memavail=7300556 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785293.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=23386 bytes_read=60835 bytes_retransmit=9 bytes_invalid=0 send_seq=1621 receive_seq=1621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993468 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.46 cputime=8.421 memavail=7300556 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785294.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=23504 bytes_read=61155 bytes_retransmit=9 bytes_invalid=0 send_seq=1630 receive_seq=1630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993465 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.42 cputime=8.457 memavail=7299952 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785295.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=23622 bytes_read=61445 bytes_retransmit=9 bytes_invalid=0 send_seq=1639 receive_seq=1639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993465 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.42 cputime=8.487 memavail=7300088 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785296.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=23740 bytes_read=61735 bytes_retransmit=9 bytes_invalid=0 send_seq=1648 receive_seq=1648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993465 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.42 cputime=8.525 memavail=7299864 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785297.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=23858 bytes_read=62055 bytes_retransmit=9 bytes_invalid=0 send_seq=1657 receive_seq=1657 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993460 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.42 cputime=8.564 memavail=7299864 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785298.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=23976 bytes_read=62360 bytes_retransmit=9 bytes_invalid=0 send_seq=1666 receive_seq=1666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993457 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.42 cputime=8.599 memavail=7299864 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785299.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24094 bytes_read=62650 bytes_retransmit=9 bytes_invalid=0 send_seq=1675 receive_seq=1675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993450 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.39 cputime=8.638 memavail=7299864 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785300.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24212 bytes_read=62970 bytes_retransmit=9 bytes_invalid=0 send_seq=1684 receive_seq=1684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993443 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.39 cputime=8.682 memavail=7299864 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785301.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24330 bytes_read=63260 bytes_retransmit=9 bytes_invalid=0 send_seq=1693 receive_seq=1693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993442 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.39 cputime=8.724 memavail=7299864 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785302.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24448 bytes_read=63550 bytes_retransmit=9 bytes_invalid=0 send_seq=1702 receive_seq=1702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993439 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.39 cputime=8.763 memavail=7299864 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785303.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24572 bytes_read=63901 bytes_retransmit=9 bytes_invalid=0 send_seq=1712 receive_seq=1712 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993437 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.39 cputime=8.805 memavail=7299864 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 785304.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24690 bytes_read=64191 bytes_retransmit=9 bytes_invalid=0 send_seq=1721 receive_seq=1721 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993458 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.52 cputime=8.842 memavail=7299108 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785305.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24808 bytes_read=64481 bytes_retransmit=9 bytes_invalid=0 send_seq=1730 receive_seq=1730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993452 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.52 cputime=8.882 memavail=7299112 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785306.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24926 bytes_read=64801 bytes_retransmit=9 bytes_invalid=0 send_seq=1739 receive_seq=1739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993447 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.52 cputime=8.922 memavail=7299112 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785307.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25044 bytes_read=65091 bytes_retransmit=9 bytes_invalid=0 send_seq=1748 receive_seq=1748 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993446 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.52 cputime=8.964 memavail=7299112 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785308.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25162 bytes_read=65396 bytes_retransmit=9 bytes_invalid=0 send_seq=1757 receive_seq=1757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993480 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.52 cputime=9.009 memavail=7299112 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785309.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25280 bytes_read=65716 bytes_retransmit=9 bytes_invalid=0 send_seq=1766 receive_seq=1766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993475 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.47 cputime=9.049 memavail=7298888 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785310.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25398 bytes_read=66006 bytes_retransmit=9 bytes_invalid=0 send_seq=1775 receive_seq=1775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993472 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.47 cputime=9.086 memavail=7298888 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785311.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25516 bytes_read=66296 bytes_retransmit=9 bytes_invalid=0 send_seq=1784 receive_seq=1784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993472 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.47 cputime=9.130 memavail=7298888 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785312.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25634 bytes_read=66607 bytes_retransmit=9 bytes_invalid=0 send_seq=1793 receive_seq=1793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993469 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.47 cputime=9.168 memavail=7298888 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785313.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25752 bytes_read=66905 bytes_retransmit=9 bytes_invalid=0 send_seq=1802 receive_seq=1802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993464 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.47 cputime=9.204 memavail=7299144 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785314.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25870 bytes_read=67195 bytes_retransmit=9 bytes_invalid=0 send_seq=1811 receive_seq=1811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993462 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.44 cputime=9.241 memavail=7298892 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785315.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25988 bytes_read=67515 bytes_retransmit=9 bytes_invalid=0 send_seq=1820 receive_seq=1820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993458 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.44 cputime=9.283 memavail=7298896 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785316.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=26106 bytes_read=67805 bytes_retransmit=9 bytes_invalid=0 send_seq=1829 receive_seq=1829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993464 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.44 cputime=9.318 memavail=7298896 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785317.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=26224 bytes_read=68095 bytes_retransmit=9 bytes_invalid=0 send_seq=1838 receive_seq=1838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993475 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.44 cputime=9.358 memavail=7298896 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785318.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=26342 bytes_read=68430 bytes_retransmit=9 bytes_invalid=0 send_seq=1847 receive_seq=1847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993472 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.44 cputime=9.395 memavail=7298896 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785319.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=26460 bytes_read=68720 bytes_retransmit=9 bytes_invalid=0 send_seq=1856 receive_seq=1856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993467 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.40 cputime=9.433 memavail=7298672 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785320.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=26578 bytes_read=69025 bytes_retransmit=9 bytes_invalid=0 send_seq=1865 receive_seq=1865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993464 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.40 cputime=9.472 memavail=7298672 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785321.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=26696 bytes_read=69330 bytes_retransmit=9 bytes_invalid=0 send_seq=1874 receive_seq=1874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993460 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.40 cputime=9.504 memavail=7298672 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785322.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=26814 bytes_read=69620 bytes_retransmit=9 bytes_invalid=0 send_seq=1883 receive_seq=1883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993457 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.40 cputime=9.537 memavail=7298672 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785323.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=26932 bytes_read=69940 bytes_retransmit=9 bytes_invalid=0 send_seq=1892 receive_seq=1892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993455 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.40 cputime=9.574 memavail=7298672 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785324.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27050 bytes_read=70245 bytes_retransmit=9 bytes_invalid=0 send_seq=1901 receive_seq=1901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993453 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.37 cputime=9.611 memavail=7299412 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785325.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27168 bytes_read=70535 bytes_retransmit=9 bytes_invalid=0 send_seq=1910 receive_seq=1910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993461 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.37 cputime=9.648 memavail=7299428 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 785326.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27286 bytes_read=70840 bytes_retransmit=9 bytes_invalid=0 send_seq=1919 receive_seq=1919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993493 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.37 cputime=9.685 memavail=7299428 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785327.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27404 bytes_read=71145 bytes_retransmit=9 bytes_invalid=0 send_seq=1928 receive_seq=1928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993486 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.37 cputime=9.717 memavail=7299428 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785328.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27522 bytes_read=71450 bytes_retransmit=9 bytes_invalid=0 send_seq=1937 receive_seq=1937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993481 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.37 cputime=9.754 memavail=7299428 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785329.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27640 bytes_read=71755 bytes_retransmit=9 bytes_invalid=0 send_seq=1946 receive_seq=1946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993476 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.34 cputime=9.788 memavail=7299428 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785330.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27758 bytes_read=72060 bytes_retransmit=9 bytes_invalid=0 send_seq=1955 receive_seq=1955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993501 heater_bed: target=0 temp=20.7 pwm=0.000  sysload=0.34 cputime=9.828 memavail=7299428 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785331.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27876 bytes_read=72350 bytes_retransmit=9 bytes_invalid=0 send_seq=1964 receive_seq=1964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993493 heater_bed: target=0 temp=21.0 pwm=0.000  sysload=0.34 cputime=9.860 memavail=7299432 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785332.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27994 bytes_read=72655 bytes_retransmit=9 bytes_invalid=0 send_seq=1973 receive_seq=1973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993487 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.34 cputime=9.897 memavail=7299432 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785333.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=28112 bytes_read=72975 bytes_retransmit=9 bytes_invalid=0 send_seq=1982 receive_seq=1982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993487 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.34 cputime=9.933 memavail=7299432 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 785334.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=28230 bytes_read=73265 bytes_retransmit=9 bytes_invalid=0 send_seq=1991 receive_seq=1991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993482 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.31 cputime=9.966 memavail=7299628 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785335.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=28348 bytes_read=73570 bytes_retransmit=9 bytes_invalid=0 send_seq=2000 receive_seq=2000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993476 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.31 cputime=10.004 memavail=7299688 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 785336.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=28466 bytes_read=73875 bytes_retransmit=9 bytes_invalid=0 send_seq=2009 receive_seq=2009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993482 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.31 cputime=10.039 memavail=7299688 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 785337.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=28584 bytes_read=74165 bytes_retransmit=9 bytes_invalid=0 send_seq=2018 receive_seq=2018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993478 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.31 cputime=10.076 memavail=7299688 print_time=323.417 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-311-g9e765dae'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sat Nov 18 16:47:03 2023 (1700354823.6 788466.5)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
webhooks client 547778030896: New connection
webhooks client 547778030896: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
Loaded MCU 'mcu' 105 commands (v0.11.0-105-g1e7057e9 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0=P0.28,P0.27 BUS_PINS_i2c1=P0.1,P0.0 BUS_PINS_i2c1a=P0.20,P0.19 BUS_PINS_i2c2=P0.11,P0.10 BUS_PINS_ssp0=P0.17,P0.18,P0.15 BUS_PINS_ssp1=P0.8,P0.9,P0.7 CLOCK_FREQ=120000000 MCU=lpc1769 PWM_MAX=255 RESERVE_PINS_USB=P0.30,P0.29,P2.9 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (0.0, 10.0)     | (27.0, 5.0)
  1   | (35.5, 10.0)    | (62.5, 5.0)
  2   | (71.0, 10.0)    | (98.0, 5.0)
  3   | (106.5, 10.0)   | (133.5, 5.0)
  4   | (142.0, 10.0)   | (169.0, 5.0)
  5   | (177.5, 10.0)   | (204.5, 5.0)
  6   | (213.0, 10.0)   | (240.0, 5.0)
  7   | (213.0, 58.8)   | (240.0, 53.8)
  8   | (177.5, 58.8)   | (204.5, 53.8)
  9   | (142.0, 58.8)   | (169.0, 53.8)
  10  | (106.5, 58.8)   | (133.5, 53.8)
  11  | (71.0, 58.8)    | (98.0, 53.8)
  12  | (35.5, 58.8)    | (62.5, 53.8)
  13  | (0.0, 58.8)     | (27.0, 53.8)
  14  | (0.0, 107.5)    | (27.0, 102.5)
  15  | (35.5, 107.5)   | (62.5, 102.5)
  16  | (71.0, 107.5)   | (98.0, 102.5)
  17  | (106.5, 107.5)  | (133.5, 102.5)
  18  | (142.0, 107.5)  | (169.0, 102.5)
  19  | (177.5, 107.5)  | (204.5, 102.5)
  20  | (213.0, 107.5)  | (240.0, 102.5)
  21  | (213.0, 156.2)  | (240.0, 151.2)
  22  | (177.5, 156.2)  | (204.5, 151.2)
  23  | (142.0, 156.2)  | (169.0, 151.2)
  24  | (106.5, 156.2)  | (133.5, 151.2)
  25  | (71.0, 156.2)   | (98.0, 151.2)
  26  | (35.5, 156.2)   | (62.5, 151.2)
  27  | (0.0, 156.2)    | (27.0, 151.2)
  28  | (0.0, 205.0)    | (27.0, 200.0)
  29  | (35.5, 205.0)   | (62.5, 200.0)
  30  | (71.0, 205.0)   | (98.0, 200.0)
  31  | (106.5, 205.0)  | (133.5, 200.0)
  32  | (142.0, 205.0)  | (169.0, 200.0)
  33  | (177.5, 205.0)  | (204.5, 200.0)
  34  | (213.0, 205.0)  | (240.0, 200.0)
Starting heater checks for extruder
Starting heater checks for heater_bed
Stats 788474.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2756 bytes_read=5906 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119996636 heater_bed: target=0 temp=0.0 pwm=0.000  sysload=0.25 cputime=1.922 memavail=7292828 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 547778030896
webhooks: registering remote method 'reboot_machine' for connection id: 547778030896
webhooks: registering remote method 'pause_job_queue' for connection id: 547778030896
webhooks: registering remote method 'start_job_queue' for connection id: 547778030896
webhooks: registering remote method 'timelapse_newframe' for connection id: 547778030896
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 547778030896
webhooks: registering remote method 'timelapse_render' for connection id: 547778030896
webhooks: registering remote method 'publish_mqtt_topic' for connection id: 547778030896
webhooks: registering remote method 'notify' for connection id: 547778030896
webhooks: registering remote method 'set_device_power' for connection id: 547778030896
Stats 788475.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2770 bytes_read=6027 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993182 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.25 cputime=1.987 memavail=7298224 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 788476.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2776 bytes_read=6133 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993648 heater_bed: target=0 temp=20.9 pwm=0.000  sysload=0.31 cputime=2.008 memavail=7297752 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 788477.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2782 bytes_read=6254 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993639 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.31 cputime=2.021 memavail=7297248 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Stats 788478.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2788 bytes_read=6390 bytes_retransmit=9 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993631 heater_bed: target=0 temp=20.8 pwm=0.000  sysload=0.31 cputime=2.042 memavail=7297520 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.9 pwm=0.000
Heater extruder approaching new target of 195.000
Heater heater_bed approaching new target of 40.000
Stats 788479.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2821 bytes_read=6501 bytes_retransmit=9 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993537 heater_bed: target=40 temp=21.0 pwm=1.000  sysload=0.31 cputime=2.084 memavail=7295828 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=20.9 pwm=1.000
Stats 788480.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2827 bytes_read=6622 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993436 heater_bed: target=40 temp=20.7 pwm=1.000  sysload=0.31 cputime=2.114 memavail=7295828 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=21.2 pwm=1.000
Stats 788481.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2833 bytes_read=6743 bytes_retransmit=9 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119998866 heater_bed: target=40 temp=20.9 pwm=1.000  sysload=0.28 cputime=2.153 memavail=7297592 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=24.7 pwm=1.000
Stats 788482.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2839 bytes_read=6849 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119997163 heater_bed: target=40 temp=20.9 pwm=1.000  sysload=0.28 cputime=2.185 memavail=7299220 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=28.8 pwm=1.000
Stats 788483.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2877 bytes_read=6994 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119996033 heater_bed: target=40 temp=20.9 pwm=1.000  sysload=0.28 cputime=2.213 memavail=7299356 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=33.3 pwm=1.000
Stats 788484.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2883 bytes_read=7115 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119995395 heater_bed: target=40 temp=21.1 pwm=1.000  sysload=0.28 cputime=2.235 memavail=7299356 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=39.4 pwm=1.000
Stats 788485.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2889 bytes_read=7221 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119995414 heater_bed: target=40 temp=21.3 pwm=1.000  sysload=0.28 cputime=2.261 memavail=7299356 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=44.0 pwm=1.000
Stats 788486.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2895 bytes_read=7342 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994968 heater_bed: target=40 temp=21.4 pwm=1.000  sysload=0.26 cputime=2.285 memavail=7299356 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=48.5 pwm=1.000
Stats 788487.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2933 bytes_read=7473 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994639 heater_bed: target=40 temp=21.6 pwm=1.000  sysload=0.26 cputime=2.306 memavail=7299356 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=54.2 pwm=1.000
Stats 788488.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2939 bytes_read=7593 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994502 heater_bed: target=40 temp=21.9 pwm=1.000  sysload=0.26 cputime=2.327 memavail=7299356 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=58.4 pwm=1.000
Stats 788489.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2945 bytes_read=7714 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994332 heater_bed: target=40 temp=22.2 pwm=1.000  sysload=0.26 cputime=2.350 memavail=7298348 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=62.4 pwm=1.000
Stats 788490.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2951 bytes_read=7835 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994164 heater_bed: target=40 temp=22.5 pwm=1.000  sysload=0.26 cputime=2.370 memavail=7298356 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=67.6 pwm=1.000
Stats 788491.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2957 bytes_read=7941 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994042 heater_bed: target=40 temp=22.9 pwm=1.000  sysload=0.24 cputime=2.395 memavail=7298356 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=71.5 pwm=1.000
Stats 788492.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2995 bytes_read=8072 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993967 heater_bed: target=40 temp=23.2 pwm=1.000  sysload=0.24 cputime=2.415 memavail=7298504 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=75.2 pwm=1.000
Stats 788493.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3001 bytes_read=8207 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993893 heater_bed: target=40 temp=23.5 pwm=1.000  sysload=0.24 cputime=2.435 memavail=7298612 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=80.2 pwm=1.000
Stats 788494.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3007 bytes_read=8313 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994275 heater_bed: target=40 temp=23.9 pwm=1.000  sysload=0.24 cputime=2.457 memavail=7298612 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=83.8 pwm=1.000
Stats 788495.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3013 bytes_read=8434 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994157 heater_bed: target=40 temp=24.3 pwm=1.000  sysload=0.24 cputime=2.475 memavail=7298612 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=87.4 pwm=1.000
Stats 788496.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3051 bytes_read=8565 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994054 heater_bed: target=40 temp=24.6 pwm=1.000  sysload=0.22 cputime=2.492 memavail=7298612 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=92.1 pwm=1.000
Stats 788497.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3057 bytes_read=8671 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993980 heater_bed: target=40 temp=25.0 pwm=1.000  sysload=0.22 cputime=2.506 memavail=7298612 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=95.6 pwm=1.000
Stats 788498.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3063 bytes_read=8806 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993915 heater_bed: target=40 temp=25.5 pwm=1.000  sysload=0.22 cputime=2.522 memavail=7298616 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=99.0 pwm=1.000
Stats 788499.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3069 bytes_read=8927 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993842 heater_bed: target=40 temp=25.8 pwm=1.000  sysload=0.22 cputime=2.538 memavail=7297516 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=103.5 pwm=1.000
Stats 788500.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3107 bytes_read=9043 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993789 heater_bed: target=40 temp=26.2 pwm=1.000  sysload=0.22 cputime=2.555 memavail=7297116 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=106.9 pwm=1.000
Stats 788501.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3113 bytes_read=9164 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993750 heater_bed: target=40 temp=26.6 pwm=1.000  sysload=0.36 cputime=2.576 memavail=7297116 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=110.2 pwm=1.000
Stats 788502.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3119 bytes_read=9285 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993724 heater_bed: target=40 temp=27.0 pwm=1.000  sysload=0.36 cputime=2.598 memavail=7297116 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=114.6 pwm=1.000
Stats 788503.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3125 bytes_read=9399 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993966 heater_bed: target=40 temp=27.3 pwm=1.000  sysload=0.36 cputime=2.617 memavail=7297872 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=117.9 pwm=1.000
Stats 788504.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3163 bytes_read=9522 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993906 heater_bed: target=40 temp=27.8 pwm=1.000  sysload=0.36 cputime=2.634 memavail=7297872 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=121.1 pwm=1.000
Stats 788505.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3169 bytes_read=9638 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993853 heater_bed: target=40 temp=28.1 pwm=1.000  sysload=0.36 cputime=2.656 memavail=7297872 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=125.3 pwm=1.000
Stats 788506.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3175 bytes_read=9741 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993813 heater_bed: target=40 temp=28.4 pwm=1.000  sysload=0.33 cputime=2.675 memavail=7297872 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=128.5 pwm=1.000
Stats 788507.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3181 bytes_read=9859 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993785 heater_bed: target=40 temp=29.0 pwm=1.000  sysload=0.33 cputime=2.691 memavail=7297872 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=131.6 pwm=1.000
Stats 788508.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3219 bytes_read=10000 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993754 heater_bed: target=40 temp=29.3 pwm=1.000  sysload=0.33 cputime=2.708 memavail=7297872 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=135.8 pwm=1.000
Stats 788509.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3225 bytes_read=10103 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993723 heater_bed: target=40 temp=29.7 pwm=1.000  sysload=0.33 cputime=2.721 memavail=7297264 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=138.8 pwm=1.000
Stats 788510.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3237 bytes_read=10237 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993675 heater_bed: target=40 temp=30.1 pwm=1.000  sysload=0.33 cputime=2.739 memavail=7297372 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=141.9 pwm=1.000
Stats 788511.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3243 bytes_read=10354 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993767 heater_bed: target=40 temp=30.5 pwm=1.000  sysload=0.31 cputime=2.762 memavail=7297372 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=145.9 pwm=1.000
Stats 788512.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3265 bytes_read=10462 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993736 heater_bed: target=40 temp=30.9 pwm=0.922  sysload=0.31 cputime=2.777 memavail=7297372 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=148.9 pwm=1.000
Stats 788513.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3314 bytes_read=10604 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993707 heater_bed: target=40 temp=31.3 pwm=0.931  sysload=0.31 cputime=2.792 memavail=7297372 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=151.9 pwm=1.000
Stats 788514.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3352 bytes_read=10731 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993680 heater_bed: target=40 temp=31.6 pwm=1.000  sysload=0.31 cputime=2.813 memavail=7297372 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=155.8 pwm=1.000
Stats 788515.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3406 bytes_read=10849 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993664 heater_bed: target=40 temp=32.1 pwm=0.666  sysload=0.31 cputime=2.834 memavail=7297372 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=158.7 pwm=1.000
Stats 788516.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3444 bytes_read=10977 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993657 heater_bed: target=40 temp=32.5 pwm=0.793  sysload=0.28 cputime=2.851 memavail=7297372 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=161.6 pwm=1.000
Stats 788517.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3509 bytes_read=11109 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993641 heater_bed: target=40 temp=32.9 pwm=0.595  sysload=0.28 cputime=2.868 memavail=7297372 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=165.4 pwm=1.000
Stats 788518.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3531 bytes_read=11231 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993629 heater_bed: target=40 temp=33.1 pwm=0.918  sysload=0.28 cputime=2.883 memavail=7297372 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=168.2 pwm=1.000
Stats 788519.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3585 bytes_read=11364 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993623 heater_bed: target=40 temp=33.6 pwm=0.501  sysload=0.28 cputime=2.906 memavail=7297816 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=171.1 pwm=1.000
Stats 788520.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3639 bytes_read=11496 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993605 heater_bed: target=40 temp=33.9 pwm=0.592  sysload=0.28 cputime=2.927 memavail=7297880 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=174.8 pwm=1.000
Stats 788521.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3709 bytes_read=11619 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993590 heater_bed: target=40 temp=34.2 pwm=0.439  sysload=0.26 cputime=2.950 memavail=7297880 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=177.5 pwm=1.000
Stats 788522.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3779 bytes_read=11757 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993577 heater_bed: target=40 temp=34.5 pwm=0.847  sysload=0.26 cputime=2.970 memavail=7297880 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=180.3 pwm=1.000
Stats 788523.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=3865 bytes_read=11913 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993569 heater_bed: target=40 temp=34.8 pwm=0.503  sysload=0.26 cputime=2.990 memavail=7297656 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=184.0 pwm=0.723
Stats 788524.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=3919 bytes_read=12031 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993567 heater_bed: target=40 temp=35.1 pwm=0.633  sysload=0.26 cputime=3.010 memavail=7297656 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=186.5 pwm=0.563
Heater heater_bed within range of 40.000
Stats 788525.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=4000 bytes_read=12169 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993561 heater_bed: target=40 temp=35.4 pwm=0.740  sysload=0.26 cputime=3.033 memavail=7297660 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=188.8 pwm=0.404
Stats 788526.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=4086 bytes_read=12311 bytes_retransmit=9 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993554 heater_bed: target=40 temp=35.7 pwm=0.699  sysload=0.32 cputime=3.056 memavail=7297660 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=191.0 pwm=0.415
Heater extruder within range of 195.000
Stats 788527.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=4140 bytes_read=12429 bytes_retransmit=9 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993549 heater_bed: target=40 temp=36.0 pwm=0.456  sysload=0.32 cputime=3.074 memavail=7297808 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=192.3 pwm=0.415
Stats 788528.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=4194 bytes_read=12590 bytes_retransmit=9 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993543 heater_bed: target=40 temp=36.3 pwm=0.518  sysload=0.32 cputime=3.095 memavail=7297912 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=193.3 pwm=0.415
Stats 788529.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=4232 bytes_read=12703 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993693 heater_bed: target=40 temp=36.6 pwm=0.360  sysload=0.32 cputime=3.119 memavail=7297600 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.2 pwm=0.415
Stats 788530.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=4302 bytes_read=12826 bytes_retransmit=9 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993677 heater_bed: target=40 temp=36.8 pwm=0.395  sysload=0.32 cputime=3.141 memavail=7297660 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.349
Stats 788531.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=4367 bytes_read=12973 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993660 heater_bed: target=40 temp=37.1 pwm=0.434  sysload=0.29 cputime=3.162 memavail=7296400 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.8 pwm=0.263
Stats 788532.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=4416 bytes_read=13086 bytes_retransmit=9 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993657 heater_bed: target=40 temp=37.2 pwm=0.419  sysload=0.29 cputime=3.189 memavail=7299236 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.4 pwm=0.164
Stats 788533.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=4486 bytes_read=13223 bytes_retransmit=9 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993647 heater_bed: target=40 temp=37.5 pwm=0.458  sysload=0.29 cputime=3.207 memavail=7299012 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.6 pwm=0.224
Stats 788534.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=4540 bytes_read=13370 bytes_retransmit=9 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993772 heater_bed: target=40 temp=37.7 pwm=0.390  sysload=0.29 cputime=3.234 memavail=7298772 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.8 pwm=0.167
Stats 788535.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=4594 bytes_read=13488 bytes_retransmit=9 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993739 heater_bed: target=40 temp=37.9 pwm=0.402  sysload=0.29 cputime=3.254 memavail=7298772 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.7 pwm=0.235
Stats 788536.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=4600 bytes_read=13591 bytes_retransmit=9 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993711 heater_bed: target=40 temp=38.1 pwm=0.402  sysload=0.27 cputime=3.272 memavail=7298696 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.8 pwm=0.235
Stats 788537.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=4670 bytes_read=13743 bytes_retransmit=9 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993695 heater_bed: target=40 temp=38.3 pwm=0.394  sysload=0.27 cputime=3.295 memavail=7298800 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.8 pwm=0.182
Stats 788538.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4735 bytes_read=13873 bytes_retransmit=9 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993729 heater_bed: target=40 temp=38.4 pwm=0.535  sysload=0.27 cputime=3.322 memavail=7298576 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.8 pwm=0.182
Stats 788539.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4798 bytes_read=13984 bytes_retransmit=9 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993710 heater_bed: target=40 temp=38.7 pwm=0.240  sysload=0.27 cputime=3.337 memavail=7298324 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.9 pwm=0.106
Stats 788540.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4868 bytes_read=14127 bytes_retransmit=9 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993691 heater_bed: target=40 temp=38.8 pwm=0.288  sysload=0.27 cputime=3.357 memavail=7298324 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.9 pwm=0.106
Stats 788541.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4938 bytes_read=14250 bytes_retransmit=9 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993676 heater_bed: target=40 temp=38.9 pwm=0.398  sysload=0.25 cputime=3.378 memavail=7298324 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.6 pwm=0.182
Stats 788542.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4992 bytes_read=14368 bytes_retransmit=9 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993698 heater_bed: target=40 temp=39.1 pwm=0.440  sysload=0.25 cputime=3.399 memavail=7298324 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.3 pwm=0.254
Stats 788543.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=5046 bytes_read=14529 bytes_retransmit=9 bytes_invalid=0 send_seq=412 receive_seq=412 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993680 heater_bed: target=40 temp=39.3 pwm=0.168  sysload=0.25 cputime=3.418 memavail=7298328 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.1 pwm=0.254
Stats 788544.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=5131 bytes_read=14657 bytes_retransmit=9 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993664 heater_bed: target=40 temp=39.3 pwm=0.440  sysload=0.25 cputime=3.439 memavail=7297584 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.2 pwm=0.129
Stats 788545.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=5215 bytes_read=14785 bytes_retransmit=9 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993650 heater_bed: target=40 temp=39.5 pwm=0.314  sysload=0.25 cputime=3.464 memavail=7297108 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.3 pwm=0.051
Stats 788546.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=5293 bytes_read=14937 bytes_retransmit=9 bytes_invalid=0 send_seq=429 receive_seq=429 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993641 heater_bed: target=40 temp=39.7 pwm=0.235  sysload=0.23 cputime=3.493 memavail=7297108 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=196.3 pwm=0.066
Stats 788547.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=5346 bytes_read=15055 bytes_retransmit=9 bytes_invalid=0 send_seq=433 receive_seq=433 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993630 heater_bed: target=40 temp=39.7 pwm=0.337  sysload=0.23 cputime=3.520 memavail=7297108 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.9 pwm=0.194
Stats 788548.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=5400 bytes_read=15187 bytes_retransmit=9 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993619 heater_bed: target=40 temp=39.9 pwm=0.242  sysload=0.23 cputime=3.544 memavail=7297108 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.7 pwm=0.194
Stats 788549.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=5437 bytes_read=15329 bytes_retransmit=9 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993609 heater_bed: target=40 temp=40.0 pwm=0.267  sysload=0.23 cputime=3.563 memavail=7296352 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.5 pwm=0.194
Stats 788550.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=5507 bytes_read=15452 bytes_retransmit=9 bytes_invalid=0 send_seq=445 receive_seq=445 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993601 heater_bed: target=40 temp=40.1 pwm=0.380  sysload=0.23 cputime=3.582 memavail=7297092 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.5 pwm=0.136
Stats 788551.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=5544 bytes_read=15565 bytes_retransmit=9 bytes_invalid=0 send_seq=448 receive_seq=448 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993645 heater_bed: target=40 temp=40.2 pwm=0.123  sysload=0.37 cputime=3.602 memavail=7297108 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.4 pwm=0.189
Stats 788552.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=5629 bytes_read=15722 bytes_retransmit=9 bytes_invalid=0 send_seq=454 receive_seq=454 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993631 heater_bed: target=40 temp=40.3 pwm=0.352  sysload=0.37 cputime=3.622 memavail=7297112 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.4 pwm=0.197
Stats 788553.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=5683 bytes_read=15854 bytes_retransmit=9 bytes_invalid=0 send_seq=458 receive_seq=458 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993614 heater_bed: target=40 temp=40.4 pwm=0.210  sysload=0.37 cputime=3.636 memavail=7296888 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.3 pwm=0.197
Stats 788554.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=5752 bytes_read=15977 bytes_retransmit=9 bytes_invalid=0 send_seq=463 receive_seq=463 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993601 heater_bed: target=40 temp=40.5 pwm=0.033  sysload=0.37 cputime=3.651 memavail=7296384 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.3 pwm=0.142
Stats 788555.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=5822 bytes_read=16129 bytes_retransmit=9 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993591 heater_bed: target=40 temp=40.6 pwm=0.198  sysload=0.37 cputime=3.674 memavail=7296384 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.3 pwm=0.142
Stats 788556.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=5844 bytes_read=16237 bytes_retransmit=9 bytes_invalid=0 send_seq=470 receive_seq=470 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993644 heater_bed: target=40 temp=40.6 pwm=0.295  sysload=0.34 cputime=3.695 memavail=7296384 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.142
Stats 788557.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=5913 bytes_read=16375 bytes_retransmit=9 bytes_invalid=0 send_seq=475 receive_seq=475 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993630 heater_bed: target=40 temp=40.7 pwm=0.293  sysload=0.34 cputime=3.713 memavail=7296384 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.239
Stats 788558.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=5966 bytes_read=16521 bytes_retransmit=9 bytes_invalid=0 send_seq=479 receive_seq=479 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993618 heater_bed: target=40 temp=40.8 pwm=0.165  sysload=0.34 cputime=3.729 memavail=7296384 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.239
Stats 788559.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=5999 bytes_read=16629 bytes_retransmit=9 bytes_invalid=0 send_seq=481 receive_seq=481 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993619 heater_bed: target=40 temp=40.8 pwm=0.138  sysload=0.34 cputime=3.744 memavail=7296384 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.239
Stats 788560.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6036 bytes_read=16757 bytes_retransmit=9 bytes_invalid=0 send_seq=484 receive_seq=484 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993663 heater_bed: target=40 temp=40.9 pwm=0.258  sysload=0.34 cputime=3.766 memavail=7296388 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.173
Stats 788561.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6120 bytes_read=16899 bytes_retransmit=9 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993655 heater_bed: target=40 temp=41.0 pwm=0.205  sysload=0.31 cputime=3.787 memavail=7296388 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.120
Stats 788562.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6158 bytes_read=17012 bytes_retransmit=9 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993642 heater_bed: target=40 temp=41.0 pwm=0.149  sysload=0.31 cputime=3.802 memavail=7296536 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.3 pwm=0.120
Stats 788563.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6207 bytes_read=17154 bytes_retransmit=9 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993630 heater_bed: target=40 temp=41.0 pwm=0.253  sysload=0.31 cputime=3.817 memavail=7296640 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.120
Stats 788564.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6273 bytes_read=17291 bytes_retransmit=9 bytes_invalid=0 send_seq=501 receive_seq=501 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993618 heater_bed: target=40 temp=41.1 pwm=0.227  sysload=0.31 cputime=3.834 memavail=7296640 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.235
Stats 788565.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6310 bytes_read=17404 bytes_retransmit=9 bytes_invalid=0 send_seq=504 receive_seq=504 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993605 heater_bed: target=40 temp=41.1 pwm=0.235  sysload=0.31 cputime=3.848 memavail=7296640 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.235
Stats 788566.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6341 bytes_read=17527 bytes_retransmit=9 bytes_invalid=0 send_seq=506 receive_seq=506 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993593 heater_bed: target=40 temp=41.1 pwm=0.215  sysload=0.29 cputime=3.868 memavail=7296644 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.235
Stats 788567.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6379 bytes_read=17654 bytes_retransmit=9 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993579 heater_bed: target=40 temp=41.2 pwm=0.138  sysload=0.29 cputime=3.881 memavail=7296568 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.235
Stats 788568.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6432 bytes_read=17786 bytes_retransmit=9 bytes_invalid=0 send_seq=513 receive_seq=513 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993572 heater_bed: target=40 temp=41.2 pwm=0.148  sysload=0.29 cputime=3.900 memavail=7296672 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.119
Stats 788569.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6484 bytes_read=17919 bytes_retransmit=9 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993616 heater_bed: target=40 temp=41.3 pwm=0.033  sysload=0.29 cputime=3.924 memavail=7296404 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.099
Stats 788570.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6522 bytes_read=18046 bytes_retransmit=9 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993611 heater_bed: target=40 temp=41.3 pwm=0.153  sysload=0.29 cputime=3.941 memavail=7296420 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.160
Stats 788571.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6565 bytes_read=18175 bytes_retransmit=9 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993591 heater_bed: target=40 temp=41.3 pwm=0.041  sysload=0.26 cputime=3.958 memavail=7296168 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.244
Stats 788572.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6616 bytes_read=18308 bytes_retransmit=9 bytes_invalid=0 send_seq=528 receive_seq=528 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993582 heater_bed: target=40 temp=41.3 pwm=0.239  sysload=0.26 cputime=3.978 memavail=7296168 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.244
Stats 788573.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6669 bytes_read=18454 bytes_retransmit=9 bytes_invalid=0 send_seq=532 receive_seq=532 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993585 heater_bed: target=40 temp=41.3 pwm=0.136  sysload=0.26 cputime=4.002 memavail=7296168 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.173
Stats 788574.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6706 bytes_read=18563 bytes_retransmit=9 bytes_invalid=0 send_seq=535 receive_seq=535 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993574 heater_bed: target=40 temp=41.4 pwm=0.079  sysload=0.26 cputime=4.020 memavail=7295920 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.173
Stats 788575.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6743 bytes_read=18682 bytes_retransmit=9 bytes_invalid=0 send_seq=538 receive_seq=538 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993565 heater_bed: target=40 temp=41.4 pwm=0.159  sysload=0.26 cputime=4.040 memavail=7295920 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.173
Stats 788576.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6796 bytes_read=18808 bytes_retransmit=9 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993558 heater_bed: target=40 temp=41.4 pwm=0.177  sysload=0.24 cputime=4.061 memavail=7295696 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.173
Stats 788577.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6877 bytes_read=18936 bytes_retransmit=9 bytes_invalid=0 send_seq=548 receive_seq=548 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993588 heater_bed: target=40 temp=41.4 pwm=0.000  sysload=0.24 cputime=4.088 memavail=7295844 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.176
Stats 788578.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6915 bytes_read=19078 bytes_retransmit=9 bytes_invalid=0 send_seq=551 receive_seq=551 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993578 heater_bed: target=40 temp=41.4 pwm=0.127  sysload=0.24 cputime=4.109 memavail=7295952 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.176
Stats 788579.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6983 bytes_read=19215 bytes_retransmit=9 bytes_invalid=0 send_seq=556 receive_seq=556 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993568 heater_bed: target=40 temp=41.4 pwm=0.109  sysload=0.24 cputime=4.129 memavail=7295700 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.144
Stats 788580.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7067 bytes_read=19343 bytes_retransmit=9 bytes_invalid=0 send_seq=562 receive_seq=562 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993555 heater_bed: target=40 temp=41.4 pwm=0.029  sysload=0.24 cputime=4.148 memavail=7295700 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.236
Stats 788581.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7104 bytes_read=19471 bytes_retransmit=9 bytes_invalid=0 send_seq=565 receive_seq=565 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993552 heater_bed: target=40 temp=41.5 pwm=0.000  sysload=0.22 cputime=4.167 memavail=7295700 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.183
Stats 788582.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7139 bytes_read=19598 bytes_retransmit=9 bytes_invalid=0 send_seq=568 receive_seq=568 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993545 heater_bed: target=40 temp=41.4 pwm=0.175  sysload=0.22 cputime=4.185 memavail=7295700 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.183
Stats 788583.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7171 bytes_read=19720 bytes_retransmit=9 bytes_invalid=0 send_seq=570 receive_seq=570 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993539 heater_bed: target=40 temp=41.4 pwm=0.217  sysload=0.22 cputime=4.204 memavail=7295700 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.183
Stats 788584.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7219 bytes_read=19853 bytes_retransmit=9 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993535 heater_bed: target=40 temp=41.5 pwm=0.066  sysload=0.22 cputime=4.226 memavail=7295452 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.183
Stats 788585.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7288 bytes_read=19990 bytes_retransmit=9 bytes_invalid=0 send_seq=579 receive_seq=579 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993530 heater_bed: target=40 temp=41.4 pwm=0.142  sysload=0.22 cputime=4.244 memavail=7295452 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.214
Stats 788586.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7325 bytes_read=20103 bytes_retransmit=9 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993597 heater_bed: target=40 temp=41.4 pwm=0.184  sysload=0.20 cputime=4.264 memavail=7295452 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.214
Stats 788587.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7359 bytes_read=20231 bytes_retransmit=9 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993588 heater_bed: target=40 temp=41.4 pwm=0.147  sysload=0.20 cputime=4.287 memavail=7295452 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.214
Stats 788588.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7443 bytes_read=20387 bytes_retransmit=9 bytes_invalid=0 send_seq=591 receive_seq=591 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993578 heater_bed: target=40 temp=41.4 pwm=0.195  sysload=0.20 cputime=4.308 memavail=7295452 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.147
Stats 788589.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7495 bytes_read=20505 bytes_retransmit=9 bytes_invalid=0 send_seq=595 receive_seq=595 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993564 heater_bed: target=40 temp=41.4 pwm=0.130  sysload=0.20 cputime=4.331 memavail=7295204 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.147
Stats 788590.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7555 bytes_read=20638 bytes_retransmit=9 bytes_invalid=0 send_seq=599 receive_seq=599 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993551 heater_bed: target=40 temp=41.4 pwm=0.044  sysload=0.20 cputime=4.357 memavail=7295204 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.203
Stats 788591.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7607 bytes_read=20770 bytes_retransmit=9 bytes_invalid=0 send_seq=603 receive_seq=603 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993605 heater_bed: target=40 temp=41.4 pwm=0.079  sysload=0.19 cputime=4.379 memavail=7295204 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.203
Stats 788592.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7629 bytes_read=20878 bytes_retransmit=9 bytes_invalid=0 send_seq=605 receive_seq=605 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993590 heater_bed: target=40 temp=41.3 pwm=0.293  sysload=0.19 cputime=4.390 memavail=7295204 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.203
Stats 788593.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7663 bytes_read=21020 bytes_retransmit=9 bytes_invalid=0 send_seq=608 receive_seq=608 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993580 heater_bed: target=40 temp=41.4 pwm=0.069  sysload=0.19 cputime=4.418 memavail=7295204 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.203
Stats 788594.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7697 bytes_read=21147 bytes_retransmit=9 bytes_invalid=0 send_seq=611 receive_seq=611 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993568 heater_bed: target=40 temp=41.4 pwm=0.104  sysload=0.19 cputime=4.434 memavail=7295204 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.162
Stats 788595.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7748 bytes_read=21265 bytes_retransmit=9 bytes_invalid=0 send_seq=615 receive_seq=615 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993623 heater_bed: target=40 temp=41.4 pwm=0.000  sysload=0.19 cputime=4.455 memavail=7295232 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.162
Stats 788596.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7785 bytes_read=21393 bytes_retransmit=9 bytes_invalid=0 send_seq=618 receive_seq=618 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993610 heater_bed: target=40 temp=41.4 pwm=0.000  sysload=0.25 cputime=4.475 memavail=7295008 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.162
Stats 788597.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7804 bytes_read=21515 bytes_retransmit=9 bytes_invalid=0 send_seq=620 receive_seq=620 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993595 heater_bed: target=40 temp=41.4 pwm=0.000  sysload=0.25 cputime=4.488 memavail=7295156 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.222
Stats 788598.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7856 bytes_read=21647 bytes_retransmit=9 bytes_invalid=0 send_seq=624 receive_seq=624 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993583 heater_bed: target=40 temp=41.4 pwm=0.053  sysload=0.25 cputime=4.502 memavail=7295260 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.222
Stats 788599.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7878 bytes_read=21770 bytes_retransmit=9 bytes_invalid=0 send_seq=626 receive_seq=626 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993613 heater_bed: target=40 temp=41.4 pwm=0.102  sysload=0.25 cputime=4.523 memavail=7295524 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.222
Stats 788600.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7930 bytes_read=21902 bytes_retransmit=9 bytes_invalid=0 send_seq=630 receive_seq=630 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993612 heater_bed: target=40 temp=41.4 pwm=0.022  sysload=0.25 cputime=4.542 memavail=7295544 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.222
Stats 788601.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7981 bytes_read=22020 bytes_retransmit=9 bytes_invalid=0 send_seq=634 receive_seq=634 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993600 heater_bed: target=40 temp=41.4 pwm=0.000  sysload=0.23 cputime=4.565 memavail=7295544 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.163
Stats 788602.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=8034 bytes_read=22153 bytes_retransmit=9 bytes_invalid=0 send_seq=638 receive_seq=638 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993599 heater_bed: target=40 temp=41.3 pwm=0.147  sysload=0.23 cputime=4.587 memavail=7295544 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.163
Stats 788603.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=8069 bytes_read=22280 bytes_retransmit=9 bytes_invalid=0 send_seq=641 receive_seq=641 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993588 heater_bed: target=40 temp=41.3 pwm=0.197  sysload=0.23 cputime=4.614 memavail=7295544 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.163
Stats 788604.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=8116 bytes_read=22407 bytes_retransmit=9 bytes_invalid=0 send_seq=644 receive_seq=644 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993579 heater_bed: target=40 temp=41.3 pwm=0.018  sysload=0.23 cputime=4.634 memavail=7295040 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.163
Stats 788605.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=8163 bytes_read=22535 bytes_retransmit=9 bytes_invalid=0 send_seq=647 receive_seq=647 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993567 heater_bed: target=40 temp=41.2 pwm=0.026  sysload=0.23 cputime=4.656 memavail=7295040 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.203
Stats 788606.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=8212 bytes_read=22667 bytes_retransmit=9 bytes_invalid=0 send_seq=651 receive_seq=651 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993563 heater_bed: target=40 temp=41.2 pwm=0.130  sysload=0.21 cputime=4.672 memavail=7295040 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.203
Stats 788607.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=8278 bytes_read=22790 bytes_retransmit=9 bytes_invalid=0 send_seq=656 receive_seq=656 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993560 heater_bed: target=40 temp=41.3 pwm=0.000  sysload=0.21 cputime=4.696 memavail=7295040 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.208
Stats 788608.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=8309 bytes_read=22913 bytes_retransmit=9 bytes_invalid=0 send_seq=658 receive_seq=658 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993605 heater_bed: target=40 temp=41.2 pwm=0.070  sysload=0.21 cputime=4.720 memavail=7295040 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.208
Stats 788609.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=8374 bytes_read=23064 bytes_retransmit=9 bytes_invalid=0 send_seq=663 receive_seq=663 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993592 heater_bed: target=40 temp=41.2 pwm=0.134  sysload=0.21 cputime=4.744 memavail=7294940 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.128
Stats 788610.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=8427 bytes_read=23178 bytes_retransmit=9 bytes_invalid=0 send_seq=667 receive_seq=667 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993579 heater_bed: target=40 temp=41.2 pwm=0.182  sysload=0.21 cputime=4.761 memavail=7295044 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.206
Stats 788611.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=8477 bytes_read=23303 bytes_retransmit=9 bytes_invalid=0 send_seq=671 receive_seq=671 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993573 heater_bed: target=40 temp=41.2 pwm=0.021  sysload=0.20 cputime=4.783 memavail=7295044 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.206
Stats 788612.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=8498 bytes_read=23421 bytes_retransmit=9 bytes_invalid=0 send_seq=673 receive_seq=673 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993565 heater_bed: target=40 temp=41.2 pwm=0.076  sysload=0.20 cputime=4.801 memavail=7295784 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.206
Stats 788613.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=8548 bytes_read=23539 bytes_retransmit=9 bytes_invalid=0 send_seq=677 receive_seq=677 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993554 heater_bed: target=40 temp=41.2 pwm=0.000  sysload=0.20 cputime=4.823 memavail=7295800 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.206
Stats 788614.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=8629 bytes_read=23696 bytes_retransmit=9 bytes_invalid=0 send_seq=683 receive_seq=683 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993545 heater_bed: target=40 temp=41.1 pwm=0.166  sysload=0.20 cputime=4.848 memavail=7295296 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.162
Stats 788615.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=8690 bytes_read=23828 bytes_retransmit=9 bytes_invalid=0 send_seq=687 receive_seq=687 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993537 heater_bed: target=40 temp=41.1 pwm=0.000  sysload=0.20 cputime=4.869 memavail=7295296 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.162
Stats 788616.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=8728 bytes_read=23941 bytes_retransmit=9 bytes_invalid=0 send_seq=690 receive_seq=690 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993530 heater_bed: target=40 temp=41.0 pwm=0.161  sysload=0.18 cputime=4.885 memavail=7295296 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.162
Stats 788617.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=8765 bytes_read=24069 bytes_retransmit=9 bytes_invalid=0 send_seq=693 receive_seq=693 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993573 heater_bed: target=40 temp=41.0 pwm=0.176  sysload=0.18 cputime=4.912 memavail=7296052 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.162
Stats 788618.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=8818 bytes_read=24201 bytes_retransmit=9 bytes_invalid=0 send_seq=697 receive_seq=697 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993564 heater_bed: target=40 temp=41.0 pwm=0.070  sysload=0.18 cputime=4.937 memavail=7296052 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.238
Stats 788619.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=8855 bytes_read=24328 bytes_retransmit=9 bytes_invalid=0 send_seq=700 receive_seq=700 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993552 heater_bed: target=40 temp=41.0 pwm=0.009  sysload=0.18 cputime=4.952 memavail=7295584 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.238
Stats 788620.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=8937 bytes_read=24471 bytes_retransmit=9 bytes_invalid=0 send_seq=706 receive_seq=706 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993544 heater_bed: target=40 temp=41.0 pwm=0.000  sysload=0.18 cputime=4.974 memavail=7295584 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.284
Stats 788621.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9033 bytes_read=24618 bytes_retransmit=9 bytes_invalid=0 send_seq=713 receive_seq=713 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993537 heater_bed: target=40 temp=40.9 pwm=0.239  sysload=0.17 cputime=5.001 memavail=7295584 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.147
Stats 788622.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9062 bytes_read=24726 bytes_retransmit=9 bytes_invalid=0 send_seq=715 receive_seq=715 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993529 heater_bed: target=40 temp=41.0 pwm=0.000  sysload=0.17 cputime=5.019 memavail=7295584 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.147
Stats 788623.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9112 bytes_read=24859 bytes_retransmit=9 bytes_invalid=0 send_seq=719 receive_seq=719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993521 heater_bed: target=40 temp=41.0 pwm=0.078  sysload=0.17 cputime=5.040 memavail=7295584 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.147
Stats 788624.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=9162 bytes_read=25005 bytes_retransmit=9 bytes_invalid=0 send_seq=723 receive_seq=723 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993514 heater_bed: target=40 temp=40.9 pwm=0.226  sysload=0.17 cputime=5.059 memavail=7295744 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.147
Stats 788625.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=9212 bytes_read=25123 bytes_retransmit=9 bytes_invalid=0 send_seq=727 receive_seq=727 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993509 heater_bed: target=40 temp=41.0 pwm=0.000  sysload=0.17 cputime=5.080 memavail=7295840 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.278
Stats 788626.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=9279 bytes_read=25261 bytes_retransmit=9 bytes_invalid=0 send_seq=732 receive_seq=732 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993574 heater_bed: target=40 temp=40.9 pwm=0.077  sysload=0.15 cputime=5.109 memavail=7295840 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.246
Stats 788627.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=9316 bytes_read=25388 bytes_retransmit=9 bytes_invalid=0 send_seq=735 receive_seq=735 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993562 heater_bed: target=40 temp=40.9 pwm=0.077  sysload=0.15 cputime=5.127 memavail=7295840 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.195
Stats 788628.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=9363 bytes_read=25506 bytes_retransmit=9 bytes_invalid=0 send_seq=739 receive_seq=739 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993552 heater_bed: target=40 temp=41.0 pwm=0.000  sysload=0.15 cputime=5.144 memavail=7295840 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.195
Stats 788629.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9438 bytes_read=25658 bytes_retransmit=9 bytes_invalid=0 send_seq=744 receive_seq=744 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993542 heater_bed: target=40 temp=40.9 pwm=0.131  sysload=0.15 cputime=5.163 memavail=7296096 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.113
Stats 788630.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9506 bytes_read=25795 bytes_retransmit=9 bytes_invalid=0 send_seq=749 receive_seq=749 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993534 heater_bed: target=40 temp=40.9 pwm=0.018  sysload=0.15 cputime=5.184 memavail=7296096 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.176
Stats 788631.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9556 bytes_read=25913 bytes_retransmit=9 bytes_invalid=0 send_seq=753 receive_seq=753 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993525 heater_bed: target=40 temp=40.9 pwm=0.114  sysload=0.14 cputime=5.205 memavail=7296096 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.176
Stats 788632.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9612 bytes_read=26062 bytes_retransmit=9 bytes_invalid=0 send_seq=758 receive_seq=758 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993505 heater_bed: target=40 temp=40.9 pwm=0.000  sysload=0.14 cputime=5.226 memavail=7296348 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.250
Stats 788633.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=9665 bytes_read=26194 bytes_retransmit=9 bytes_invalid=0 send_seq=762 receive_seq=762 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993499 heater_bed: target=40 temp=40.8 pwm=0.250  sysload=0.14 cputime=5.242 memavail=7296348 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.191
Stats 788634.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=9713 bytes_read=26326 bytes_retransmit=9 bytes_invalid=0 send_seq=766 receive_seq=766 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993579 heater_bed: target=40 temp=40.9 pwm=0.000  sysload=0.14 cputime=5.265 memavail=7296124 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.191
Stats 788635.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=9774 bytes_read=26459 bytes_retransmit=9 bytes_invalid=0 send_seq=770 receive_seq=770 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993574 heater_bed: target=40 temp=40.8 pwm=0.082  sysload=0.14 cputime=5.281 memavail=7296124 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.191
Stats 788636.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=9842 bytes_read=26596 bytes_retransmit=9 bytes_invalid=0 send_seq=775 receive_seq=775 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993561 heater_bed: target=40 temp=40.8 pwm=0.061  sysload=0.13 cputime=5.301 memavail=7296128 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.218
Stats 788637.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=9908 bytes_read=26719 bytes_retransmit=9 bytes_invalid=0 send_seq=780 receive_seq=780 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993552 heater_bed: target=40 temp=40.8 pwm=0.102  sysload=0.13 cputime=5.317 memavail=7296128 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.206
Stats 788638.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=9960 bytes_read=26852 bytes_retransmit=9 bytes_invalid=0 send_seq=784 receive_seq=784 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993543 heater_bed: target=40 temp=40.7 pwm=0.210  sysload=0.13 cputime=5.332 memavail=7296128 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.206
Stats 788639.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=10004 bytes_read=26993 bytes_retransmit=9 bytes_invalid=0 send_seq=787 receive_seq=787 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993535 heater_bed: target=40 temp=40.8 pwm=0.073  sysload=0.13 cputime=5.351 memavail=7295624 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.128
Stats 788640.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=10055 bytes_read=27111 bytes_retransmit=9 bytes_invalid=0 send_seq=791 receive_seq=791 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993525 heater_bed: target=40 temp=40.7 pwm=0.131  sysload=0.13 cputime=5.370 memavail=7295372 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.183
Stats 788641.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=10120 bytes_read=27249 bytes_retransmit=9 bytes_invalid=0 send_seq=796 receive_seq=796 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993515 heater_bed: target=40 temp=40.7 pwm=0.051  sysload=0.12 cputime=5.389 memavail=7295372 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.183
Stats 788642.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=10156 bytes_read=27376 bytes_retransmit=9 bytes_invalid=0 send_seq=799 receive_seq=799 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993509 heater_bed: target=40 temp=40.7 pwm=0.053  sysload=0.12 cputime=5.403 memavail=7295624 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.183
Stats 788643.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=10191 bytes_read=27489 bytes_retransmit=9 bytes_invalid=0 send_seq=802 receive_seq=802 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993530 heater_bed: target=40 temp=40.7 pwm=0.155  sysload=0.12 cputime=5.419 memavail=7295772 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.183
Stats 788644.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=10241 bytes_read=27636 bytes_retransmit=9 bytes_invalid=0 send_seq=806 receive_seq=806 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993517 heater_bed: target=40 temp=40.7 pwm=0.000  sysload=0.12 cputime=5.440 memavail=7295376 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.178
Stats 788645.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=10342 bytes_read=27783 bytes_retransmit=9 bytes_invalid=0 send_seq=813 receive_seq=813 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993505 heater_bed: target=40 temp=40.6 pwm=0.263  sysload=0.12 cputime=5.459 memavail=7295376 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.111
Stats 788646.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=10393 bytes_read=27894 bytes_retransmit=9 bytes_invalid=0 send_seq=817 receive_seq=817 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993503 heater_bed: target=40 temp=40.7 pwm=0.000  sysload=0.11 cputime=5.472 memavail=7295376 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.226
Stats 788647.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=10456 bytes_read=28019 bytes_retransmit=9 bytes_invalid=0 send_seq=821 receive_seq=821 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993494 heater_bed: target=40 temp=40.6 pwm=0.277  sysload=0.11 cputime=5.497 memavail=7295628 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.077
Stats 788648.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=10507 bytes_read=28149 bytes_retransmit=9 bytes_invalid=0 send_seq=825 receive_seq=825 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993530 heater_bed: target=40 temp=40.6 pwm=0.194  sysload=0.11 cputime=5.528 memavail=7295124 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.164
Stats 788649.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=10528 bytes_read=28271 bytes_retransmit=9 bytes_invalid=0 send_seq=827 receive_seq=827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993525 heater_bed: target=40 temp=40.7 pwm=0.085  sysload=0.11 cputime=5.550 memavail=7294368 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.164
Stats 788650.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=10603 bytes_read=28409 bytes_retransmit=9 bytes_invalid=0 send_seq=832 receive_seq=832 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993515 heater_bed: target=40 temp=40.7 pwm=0.000  sysload=0.11 cputime=5.572 memavail=7294368 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.176
Stats 788651.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=10654 bytes_read=28541 bytes_retransmit=9 bytes_invalid=0 send_seq=836 receive_seq=836 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993509 heater_bed: target=40 temp=40.7 pwm=0.000  sysload=0.18 cputime=5.589 memavail=7295108 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.234
Stats 788652.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=10724 bytes_read=28664 bytes_retransmit=9 bytes_invalid=0 send_seq=841 receive_seq=841 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993509 heater_bed: target=40 temp=40.6 pwm=0.163  sysload=0.18 cputime=5.620 memavail=7300244 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.181
Stats 788653.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=10769 bytes_read=28792 bytes_retransmit=9 bytes_invalid=0 send_seq=844 receive_seq=844 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993501 heater_bed: target=40 temp=40.6 pwm=0.000  sysload=0.18 cputime=5.637 memavail=7300020 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.181
Stats 788654.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=10821 bytes_read=28938 bytes_retransmit=9 bytes_invalid=0 send_seq=848 receive_seq=848 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993489 heater_bed: target=40 temp=40.6 pwm=0.176  sysload=0.18 cputime=5.661 memavail=7299768 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.110
Stats 788655.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=10889 bytes_read=29061 bytes_retransmit=9 bytes_invalid=0 send_seq=853 receive_seq=853 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993479 heater_bed: target=40 temp=40.6 pwm=0.143  sysload=0.18 cputime=5.688 memavail=7299544 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.130
Stats 788656.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=10924 bytes_read=29189 bytes_retransmit=9 bytes_invalid=0 send_seq=856 receive_seq=856 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993469 heater_bed: target=40 temp=40.6 pwm=0.000  sysload=0.16 cputime=5.712 memavail=7299320 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.196
Stats 788657.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=10976 bytes_read=29321 bytes_retransmit=9 bytes_invalid=0 send_seq=860 receive_seq=860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993462 heater_bed: target=40 temp=40.6 pwm=0.033  sysload=0.16 cputime=5.739 memavail=7299320 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.277
Stats 788658.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=11027 bytes_read=29439 bytes_retransmit=9 bytes_invalid=0 send_seq=864 receive_seq=864 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993455 heater_bed: target=40 temp=40.6 pwm=0.000  sysload=0.16 cputime=5.760 memavail=7299576 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.203
Stats 788659.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=11109 bytes_read=29596 bytes_retransmit=9 bytes_invalid=0 send_seq=870 receive_seq=870 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993450 heater_bed: target=40 temp=40.5 pwm=0.138  sysload=0.16 cputime=5.782 memavail=7299076 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.225
Stats 788660.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=11144 bytes_read=29723 bytes_retransmit=9 bytes_invalid=0 send_seq=873 receive_seq=873 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993447 heater_bed: target=40 temp=40.6 pwm=0.000  sysload=0.16 cputime=5.800 memavail=7299076 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.142
Stats 788661.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=11181 bytes_read=29836 bytes_retransmit=9 bytes_invalid=0 send_seq=876 receive_seq=876 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993499 heater_bed: target=40 temp=40.5 pwm=0.174  sysload=0.15 cputime=5.825 memavail=7299076 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.142
Stats 788662.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=11249 bytes_read=29974 bytes_retransmit=9 bytes_invalid=0 send_seq=881 receive_seq=881 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993492 heater_bed: target=40 temp=40.4 pwm=0.261  sysload=0.15 cputime=5.847 memavail=7299832 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.142
Stats 788663.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=11344 bytes_read=30121 bytes_retransmit=9 bytes_invalid=0 send_seq=888 receive_seq=888 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993485 heater_bed: target=40 temp=40.6 pwm=0.000  sysload=0.15 cputime=5.866 memavail=7299832 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.270
Stats 788664.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=11412 bytes_read=30258 bytes_retransmit=9 bytes_invalid=0 send_seq=893 receive_seq=893 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993476 heater_bed: target=40 temp=40.5 pwm=0.046  sysload=0.15 cputime=5.887 memavail=7299328 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.204
Stats 788665.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=11449 bytes_read=30386 bytes_retransmit=9 bytes_invalid=0 send_seq=896 receive_seq=896 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993499 heater_bed: target=40 temp=40.4 pwm=0.119  sysload=0.15 cputime=5.909 memavail=7299328 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.204
Stats 788666.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=11483 bytes_read=30513 bytes_retransmit=9 bytes_invalid=0 send_seq=899 receive_seq=899 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993494 heater_bed: target=40 temp=40.5 pwm=0.115  sysload=0.14 cputime=5.938 memavail=7299076 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.204
Stats 788667.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=11529 bytes_read=30626 bytes_retransmit=9 bytes_invalid=0 send_seq=902 receive_seq=902 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993486 heater_bed: target=40 temp=40.5 pwm=0.000  sysload=0.14 cputime=5.965 memavail=7299328 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.132
Stats 788668.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=11608 bytes_read=30778 bytes_retransmit=9 bytes_invalid=0 send_seq=907 receive_seq=907 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993480 heater_bed: target=40 temp=40.4 pwm=0.145  sysload=0.14 cputime=5.990 memavail=7299328 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.146
Stats 788669.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=11660 bytes_read=30910 bytes_retransmit=9 bytes_invalid=0 send_seq=911 receive_seq=911 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993477 heater_bed: target=40 temp=40.4 pwm=0.083  sysload=0.14 cputime=6.010 memavail=7299104 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.146
Stats 788670.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=11726 bytes_read=31033 bytes_retransmit=9 bytes_invalid=0 send_seq=916 receive_seq=916 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993528 heater_bed: target=40 temp=40.4 pwm=0.042  sysload=0.14 cputime=6.041 memavail=7299104 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.228
Stats 788671.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=11794 bytes_read=31185 bytes_retransmit=9 bytes_invalid=0 send_seq=921 receive_seq=921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993516 heater_bed: target=40 temp=40.4 pwm=0.192  sysload=0.13 cputime=6.063 memavail=7299104 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.228
Stats 788672.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=11845 bytes_read=31303 bytes_retransmit=9 bytes_invalid=0 send_seq=925 receive_seq=925 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993507 heater_bed: target=40 temp=40.4 pwm=0.081  sysload=0.13 cputime=6.084 memavail=7299860 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.228
Stats 788673.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=11898 bytes_read=31421 bytes_retransmit=9 bytes_invalid=0 send_seq=929 receive_seq=929 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993501 heater_bed: target=40 temp=40.4 pwm=0.112  sysload=0.13 cputime=6.103 memavail=7299860 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.170
Stats 788674.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=11917 bytes_read=31572 bytes_retransmit=9 bytes_invalid=0 send_seq=931 receive_seq=931 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993549 heater_bed: target=40 temp=40.4 pwm=0.000  sysload=0.13 cputime=6.126 memavail=7299360 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.170
Stats 788675.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=11968 bytes_read=31690 bytes_retransmit=9 bytes_invalid=0 send_seq=935 receive_seq=935 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993538 heater_bed: target=40 temp=40.4 pwm=0.135  sysload=0.13 cputime=6.144 memavail=7299360 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.170
Stats 788676.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12006 bytes_read=31803 bytes_retransmit=9 bytes_invalid=0 send_seq=938 receive_seq=938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993528 heater_bed: target=40 temp=40.3 pwm=0.147  sysload=0.12 cputime=6.160 memavail=7299360 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.170
Stats 788677.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12074 bytes_read=31955 bytes_retransmit=9 bytes_invalid=0 send_seq=943 receive_seq=943 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993523 heater_bed: target=40 temp=40.4 pwm=0.015  sysload=0.12 cputime=6.184 memavail=7299360 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.186
Stats 788678.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12125 bytes_read=32073 bytes_retransmit=9 bytes_invalid=0 send_seq=947 receive_seq=947 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993510 heater_bed: target=40 temp=40.4 pwm=0.000  sysload=0.12 cputime=6.205 memavail=7299360 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.186
Stats 788679.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12147 bytes_read=32195 bytes_retransmit=9 bytes_invalid=0 send_seq=949 receive_seq=949 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993506 heater_bed: target=40 temp=40.3 pwm=0.139  sysload=0.12 cputime=6.224 memavail=7298620 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.186
Stats 788680.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12183 bytes_read=32337 bytes_retransmit=9 bytes_invalid=0 send_seq=952 receive_seq=952 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993497 heater_bed: target=40 temp=40.3 pwm=0.117  sysload=0.12 cputime=6.239 memavail=7298620 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.186
Stats 788681.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12220 bytes_read=32449 bytes_retransmit=9 bytes_invalid=0 send_seq=955 receive_seq=955 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993490 heater_bed: target=40 temp=40.3 pwm=0.003  sysload=0.11 cputime=6.253 memavail=7298368 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.180
Stats 788682.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12257 bytes_read=32555 bytes_retransmit=9 bytes_invalid=0 send_seq=958 receive_seq=958 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993482 heater_bed: target=40 temp=40.3 pwm=0.030  sysload=0.11 cputime=6.274 memavail=7298144 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.180
Stats 788683.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12292 bytes_read=32688 bytes_retransmit=9 bytes_invalid=0 send_seq=961 receive_seq=961 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993505 heater_bed: target=40 temp=40.3 pwm=0.000  sysload=0.11 cputime=6.295 memavail=7298144 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.180
Stats 788684.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12329 bytes_read=32800 bytes_retransmit=9 bytes_invalid=0 send_seq=964 receive_seq=964 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993497 heater_bed: target=40 temp=40.3 pwm=0.003  sysload=0.11 cputime=6.311 memavail=7298144 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.180
Stats 788685.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12361 bytes_read=32922 bytes_retransmit=9 bytes_invalid=0 send_seq=966 receive_seq=966 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993490 heater_bed: target=40 temp=40.3 pwm=0.115  sysload=0.11 cputime=6.328 memavail=7298144 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.248
Stats 788686.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12406 bytes_read=33064 bytes_retransmit=9 bytes_invalid=0 send_seq=969 receive_seq=969 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993485 heater_bed: target=40 temp=40.3 pwm=0.104  sysload=0.18 cputime=6.348 memavail=7298144 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.153
Stats 788687.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12441 bytes_read=33177 bytes_retransmit=9 bytes_invalid=0 send_seq=972 receive_seq=972 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993480 heater_bed: target=40 temp=40.3 pwm=0.000  sysload=0.18 cputime=6.369 memavail=7298144 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.153
Stats 788688.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12494 bytes_read=33295 bytes_retransmit=9 bytes_invalid=0 send_seq=976 receive_seq=976 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993481 heater_bed: target=40 temp=40.3 pwm=0.065  sysload=0.18 cputime=6.388 memavail=7297920 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.237
Stats 788689.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12541 bytes_read=33437 bytes_retransmit=9 bytes_invalid=0 send_seq=979 receive_seq=979 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993475 heater_bed: target=40 temp=40.3 pwm=0.000  sysload=0.18 cputime=6.408 memavail=7297672 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.186
Stats 788690.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=12609 bytes_read=33574 bytes_retransmit=9 bytes_invalid=0 send_seq=984 receive_seq=984 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993469 heater_bed: target=40 temp=40.3 pwm=0.012  sysload=0.18 cputime=6.429 memavail=7297672 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.181
Stats 788691.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=12693 bytes_read=33702 bytes_retransmit=9 bytes_invalid=0 send_seq=990 receive_seq=990 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993465 heater_bed: target=40 temp=40.3 pwm=0.099  sysload=0.25 cputime=6.457 memavail=7297672 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.182
Stats 788692.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=12768 bytes_read=33854 bytes_retransmit=9 bytes_invalid=0 send_seq=995 receive_seq=995 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993523 heater_bed: target=40 temp=40.2 pwm=0.171  sysload=0.25 cputime=6.479 memavail=7298428 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.167
Stats 788693.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=12816 bytes_read=33967 bytes_retransmit=9 bytes_invalid=0 send_seq=998 receive_seq=998 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993515 heater_bed: target=40 temp=40.2 pwm=0.283  sysload=0.25 cputime=6.496 memavail=7298428 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.167
Stats 788694.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=12858 bytes_read=34096 bytes_retransmit=9 bytes_invalid=0 send_seq=1002 receive_seq=1002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993503 heater_bed: target=40 temp=40.2 pwm=0.021  sysload=0.25 cputime=6.513 memavail=7298176 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.167
Stats 788695.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12896 bytes_read=34252 bytes_retransmit=9 bytes_invalid=0 send_seq=1005 receive_seq=1005 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993495 heater_bed: target=40 temp=40.2 pwm=0.241  sysload=0.25 cputime=6.533 memavail=7298176 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.167
Stats 788696.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12930 bytes_read=34365 bytes_retransmit=9 bytes_invalid=0 send_seq=1008 receive_seq=1008 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993487 heater_bed: target=40 temp=40.2 pwm=0.000  sysload=0.23 cputime=6.554 memavail=7298176 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.167
Stats 788697.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12983 bytes_read=34483 bytes_retransmit=9 bytes_invalid=0 send_seq=1012 receive_seq=1012 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993481 heater_bed: target=40 temp=40.2 pwm=0.142  sysload=0.23 cputime=6.575 memavail=7298180 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.209
Stats 788698.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13028 bytes_read=34625 bytes_retransmit=9 bytes_invalid=0 send_seq=1015 receive_seq=1015 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993475 heater_bed: target=40 temp=40.2 pwm=0.017  sysload=0.23 cputime=6.599 memavail=7298180 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.209
Stats 788699.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13050 bytes_read=34733 bytes_retransmit=9 bytes_invalid=0 send_seq=1017 receive_seq=1017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993469 heater_bed: target=40 temp=40.2 pwm=0.197  sysload=0.23 cputime=6.614 memavail=7298180 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.209
Stats 788700.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13085 bytes_read=34875 bytes_retransmit=9 bytes_invalid=0 send_seq=1020 receive_seq=1020 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119993509 heater_bed: target=40 temp=40.2 pwm=0.103  sysload=0.23 cputime=6.643 memavail=7298180 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.209
Stats 788701.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13164 bytes_read=35017 bytes_retransmit=9 bytes_invalid=0 send_seq=1026 receive_seq=1026 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993501 heater_bed: target=40 temp=40.2 pwm=0.000  sysload=0.21 cputime=6.671 memavail=7297928 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.110
Stats 788702.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13217 bytes_read=35135 bytes_retransmit=9 bytes_invalid=0 send_seq=1030 receive_seq=1030 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993490 heater_bed: target=40 temp=40.2 pwm=0.147  sysload=0.21 cputime=6.691 memavail=7297928 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.110
Stats 788703.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13254 bytes_read=35263 bytes_retransmit=9 bytes_invalid=0 send_seq=1033 receive_seq=1033 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993491 heater_bed: target=40 temp=40.2 pwm=0.150  sysload=0.21 cputime=6.713 memavail=7297928 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.169
Stats 788704.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13291 bytes_read=35390 bytes_retransmit=9 bytes_invalid=0 send_seq=1036 receive_seq=1036 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993534 heater_bed: target=40 temp=40.2 pwm=0.074  sysload=0.21 cputime=6.737 memavail=7297928 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.280
Stats 788705.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13370 bytes_read=35527 bytes_retransmit=9 bytes_invalid=0 send_seq=1041 receive_seq=1041 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993525 heater_bed: target=40 temp=40.2 pwm=0.088  sysload=0.21 cputime=6.756 memavail=7297928 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.202
Stats 788706.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13438 bytes_read=35665 bytes_retransmit=9 bytes_invalid=0 send_seq=1046 receive_seq=1046 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993515 heater_bed: target=40 temp=40.2 pwm=0.000  sysload=0.19 cputime=6.776 memavail=7297928 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.255
Stats 788707.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13504 bytes_read=35802 bytes_retransmit=9 bytes_invalid=0 send_seq=1051 receive_seq=1051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993507 heater_bed: target=40 temp=40.2 pwm=0.017  sysload=0.19 cputime=6.800 memavail=7298180 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.155
Stats 788708.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13525 bytes_read=35910 bytes_retransmit=9 bytes_invalid=0 send_seq=1053 receive_seq=1053 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993500 heater_bed: target=40 temp=40.2 pwm=0.100  sysload=0.19 cputime=6.820 memavail=7298180 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.155
Stats 788709.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13560 bytes_read=36038 bytes_retransmit=9 bytes_invalid=0 send_seq=1056 receive_seq=1056 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993510 heater_bed: target=40 temp=40.1 pwm=0.172  sysload=0.19 cputime=6.839 memavail=7298212 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.155
Stats 788710.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13594 bytes_read=36179 bytes_retransmit=9 bytes_invalid=0 send_seq=1059 receive_seq=1059 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993497 heater_bed: target=40 temp=40.2 pwm=0.118  sysload=0.19 cputime=6.863 memavail=7298212 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.155
Stats 788711.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13663 bytes_read=36302 bytes_retransmit=9 bytes_invalid=0 send_seq=1064 receive_seq=1064 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993485 heater_bed: target=40 temp=40.1 pwm=0.056  sysload=0.17 cputime=6.879 memavail=7298212 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.207
Stats 788712.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13705 bytes_read=36430 bytes_retransmit=9 bytes_invalid=0 send_seq=1067 receive_seq=1067 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993473 heater_bed: target=40 temp=40.1 pwm=0.265  sysload=0.17 cputime=6.898 memavail=7298212 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.207
Stats 788713.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13757 bytes_read=36562 bytes_retransmit=9 bytes_invalid=0 send_seq=1071 receive_seq=1071 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993466 heater_bed: target=40 temp=40.1 pwm=0.071  sysload=0.17 cputime=6.913 memavail=7298464 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.207
Stats 788714.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13807 bytes_read=36680 bytes_retransmit=9 bytes_invalid=0 send_seq=1075 receive_seq=1075 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993459 heater_bed: target=40 temp=40.2 pwm=0.000  sysload=0.17 cputime=6.926 memavail=7298212 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.207
Stats 788715.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=13857 bytes_read=36827 bytes_retransmit=9 bytes_invalid=0 send_seq=1079 receive_seq=1079 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993452 heater_bed: target=40 temp=40.1 pwm=0.116  sysload=0.17 cputime=6.944 memavail=7298212 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.207
Stats 788716.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=13939 bytes_read=36969 bytes_retransmit=9 bytes_invalid=0 send_seq=1085 receive_seq=1085 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993442 heater_bed: target=40 temp=40.1 pwm=0.000  sysload=0.16 cputime=6.968 memavail=7297764 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.171
Stats 788717.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=13975 bytes_read=37080 bytes_retransmit=9 bytes_invalid=0 send_seq=1088 receive_seq=1088 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993438 heater_bed: target=40 temp=40.1 pwm=0.083  sysload=0.16 cputime=6.986 memavail=7297764 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.109
Stats 788718.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=14028 bytes_read=37204 bytes_retransmit=9 bytes_invalid=0 send_seq=1092 receive_seq=1092 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993484 heater_bed: target=40 temp=40.1 pwm=0.000  sysload=0.16 cputime=7.011 memavail=7297764 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.198
Stats 788719.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=14062 bytes_read=37325 bytes_retransmit=9 bytes_invalid=0 send_seq=1095 receive_seq=1095 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993476 heater_bed: target=40 temp=40.1 pwm=0.068  sysload=0.16 cputime=7.027 memavail=7298024 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.198
Stats 788720.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14083 bytes_read=37447 bytes_retransmit=9 bytes_invalid=0 send_seq=1097 receive_seq=1097 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993468 heater_bed: target=40 temp=40.2 pwm=0.018  sysload=0.16 cputime=7.044 memavail=7298024 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.198
Stats 788721.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14135 bytes_read=37580 bytes_retransmit=9 bytes_invalid=0 send_seq=1101 receive_seq=1101 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993464 heater_bed: target=40 temp=40.2 pwm=0.028  sysload=0.15 cputime=7.062 memavail=7298024 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.198
Stats 788722.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14188 bytes_read=37712 bytes_retransmit=9 bytes_invalid=0 send_seq=1105 receive_seq=1105 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993457 heater_bed: target=40 temp=40.1 pwm=0.036  sysload=0.15 cputime=7.080 memavail=7298024 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.180
Stats 788723.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14218 bytes_read=37820 bytes_retransmit=9 bytes_invalid=0 send_seq=1107 receive_seq=1107 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993453 heater_bed: target=40 temp=40.2 pwm=0.000  sysload=0.15 cputime=7.093 memavail=7298024 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.180
Stats 788724.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14271 bytes_read=37953 bytes_retransmit=9 bytes_invalid=0 send_seq=1111 receive_seq=1111 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993446 heater_bed: target=40 temp=40.1 pwm=0.000  sysload=0.15 cputime=7.108 memavail=7297520 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.180
Stats 788725.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14322 bytes_read=38099 bytes_retransmit=9 bytes_invalid=0 send_seq=1115 receive_seq=1115 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993441 heater_bed: target=40 temp=40.1 pwm=0.154  sysload=0.15 cputime=7.129 memavail=7297520 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.180
Stats 788726.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14368 bytes_read=38212 bytes_retransmit=9 bytes_invalid=0 send_seq=1118 receive_seq=1118 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993436 heater_bed: target=40 temp=40.1 pwm=0.174  sysload=0.30 cputime=7.145 memavail=7297520 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.156
Stats 788727.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14405 bytes_read=38340 bytes_retransmit=9 bytes_invalid=0 send_seq=1121 receive_seq=1121 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993460 heater_bed: target=40 temp=40.1 pwm=0.017  sysload=0.30 cputime=7.168 memavail=7298276 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.221
Stats 788728.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14488 bytes_read=38482 bytes_retransmit=9 bytes_invalid=0 send_seq=1127 receive_seq=1127 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993454 heater_bed: target=40 temp=40.1 pwm=0.015  sysload=0.30 cputime=7.187 memavail=7298052 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.161
Stats 788729.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14573 bytes_read=38610 bytes_retransmit=9 bytes_invalid=0 send_seq=1133 receive_seq=1133 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993448 heater_bed: target=40 temp=40.1 pwm=0.062  sysload=0.30 cputime=7.209 memavail=7297300 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.230
Stats 788730.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=14595 bytes_read=38747 bytes_retransmit=9 bytes_invalid=0 send_seq=1135 receive_seq=1135 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993449 heater_bed: target=40 temp=40.1 pwm=0.128  sysload=0.30 cputime=7.231 memavail=7297048 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.230
Stats 788731.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=14663 bytes_read=38884 bytes_retransmit=9 bytes_invalid=0 send_seq=1140 receive_seq=1140 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993444 heater_bed: target=40 temp=40.1 pwm=0.005  sysload=0.27 cputime=7.252 memavail=7297048 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.173
Stats 788732.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=14715 bytes_read=39002 bytes_retransmit=9 bytes_invalid=0 send_seq=1144 receive_seq=1144 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993439 heater_bed: target=40 temp=40.1 pwm=0.009  sysload=0.27 cputime=7.270 memavail=7297300 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.173
Stats 788733.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=14768 bytes_read=39135 bytes_retransmit=9 bytes_invalid=0 send_seq=1148 receive_seq=1148 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993436 heater_bed: target=40 temp=40.1 pwm=0.000  sysload=0.27 cputime=7.289 memavail=7297304 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.173
Stats 788734.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=14830 bytes_read=39272 bytes_retransmit=9 bytes_invalid=0 send_seq=1153 receive_seq=1153 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993431 heater_bed: target=40 temp=40.1 pwm=0.110  sysload=0.27 cputime=7.312 memavail=7297064 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.173
Stats 788735.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=14896 bytes_read=39409 bytes_retransmit=9 bytes_invalid=0 send_seq=1158 receive_seq=1158 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993428 heater_bed: target=40 temp=40.1 pwm=0.111  sysload=0.27 cputime=7.332 memavail=7297064 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.154
Stats 788736.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=14946 bytes_read=39542 bytes_retransmit=9 bytes_invalid=0 send_seq=1162 receive_seq=1162 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993428 heater_bed: target=40 temp=40.1 pwm=0.100  sysload=0.25 cputime=7.353 memavail=7297064 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.154
Stats 788737.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15009 bytes_read=39674 bytes_retransmit=9 bytes_invalid=0 send_seq=1166 receive_seq=1166 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993425 heater_bed: target=40 temp=40.1 pwm=0.085  sysload=0.25 cputime=7.373 memavail=7297804 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.215
Stats 788738.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15062 bytes_read=39792 bytes_retransmit=9 bytes_invalid=0 send_seq=1170 receive_seq=1170 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993421 heater_bed: target=40 temp=40.0 pwm=0.205  sysload=0.25 cputime=7.391 memavail=7297820 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.215
Stats 788739.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15114 bytes_read=39925 bytes_retransmit=9 bytes_invalid=0 send_seq=1174 receive_seq=1174 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993419 heater_bed: target=40 temp=40.0 pwm=0.273  sysload=0.25 cputime=7.408 memavail=7297064 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.215
Stats 788740.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15180 bytes_read=40076 bytes_retransmit=9 bytes_invalid=0 send_seq=1179 receive_seq=1179 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993457 heater_bed: target=40 temp=40.0 pwm=0.203  sysload=0.25 cputime=7.427 memavail=7297064 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.215
Stats 788741.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15217 bytes_read=40189 bytes_retransmit=9 bytes_invalid=0 send_seq=1182 receive_seq=1182 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993450 heater_bed: target=40 temp=40.1 pwm=0.042  sysload=0.23 cputime=7.446 memavail=7297064 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.135
Stats 788742.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15267 bytes_read=40322 bytes_retransmit=9 bytes_invalid=0 send_seq=1186 receive_seq=1186 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993445 heater_bed: target=40 temp=40.1 pwm=0.070  sysload=0.23 cputime=7.466 memavail=7297820 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.135
Stats 788743.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15335 bytes_read=40459 bytes_retransmit=9 bytes_invalid=0 send_seq=1191 receive_seq=1191 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993450 heater_bed: target=40 temp=40.1 pwm=0.033  sysload=0.23 cputime=7.488 memavail=7297820 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.231
Stats 788744.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15399 bytes_read=40577 bytes_retransmit=9 bytes_invalid=0 send_seq=1195 receive_seq=1195 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993448 heater_bed: target=40 temp=40.0 pwm=0.080  sysload=0.23 cputime=7.504 memavail=7297076 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.215
Stats 788745.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15420 bytes_read=40714 bytes_retransmit=9 bytes_invalid=0 send_seq=1197 receive_seq=1197 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993451 heater_bed: target=40 temp=40.1 pwm=0.097  sysload=0.23 cputime=7.519 memavail=7296824 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.215
Stats 788746.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15469 bytes_read=40846 bytes_retransmit=9 bytes_invalid=0 send_seq=1201 receive_seq=1201 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993446 heater_bed: target=40 temp=40.1 pwm=0.061  sysload=0.21 cputime=7.535 memavail=7296824 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.215
Stats 788747.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15507 bytes_read=40959 bytes_retransmit=9 bytes_invalid=0 send_seq=1204 receive_seq=1204 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993441 heater_bed: target=40 temp=40.0 pwm=0.215  sysload=0.21 cputime=7.560 memavail=7296824 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.215
Stats 788748.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15558 bytes_read=41092 bytes_retransmit=9 bytes_invalid=0 send_seq=1208 receive_seq=1208 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993433 heater_bed: target=40 temp=40.0 pwm=0.146  sysload=0.21 cputime=7.586 memavail=7296828 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.137
Stats 788749.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15625 bytes_read=41229 bytes_retransmit=9 bytes_invalid=0 send_seq=1213 receive_seq=1213 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993480 heater_bed: target=40 temp=40.1 pwm=0.008  sysload=0.21 cputime=7.609 memavail=7297588 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.137
Stats 788750.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15691 bytes_read=41366 bytes_retransmit=9 bytes_invalid=0 send_seq=1218 receive_seq=1218 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993482 heater_bed: target=40 temp=40.1 pwm=0.070  sysload=0.21 cputime=7.629 memavail=7297588 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.188
Stats 788751.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15758 bytes_read=41504 bytes_retransmit=9 bytes_invalid=0 send_seq=1223 receive_seq=1223 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993474 heater_bed: target=40 temp=40.1 pwm=0.078  sysload=0.19 cputime=7.656 memavail=7297588 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.205
Stats 788752.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15827 bytes_read=41641 bytes_retransmit=9 bytes_invalid=0 send_seq=1228 receive_seq=1228 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993468 heater_bed: target=40 temp=40.0 pwm=0.231  sysload=0.19 cputime=7.678 memavail=7297840 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.205
Stats 788753.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15848 bytes_read=41745 bytes_retransmit=9 bytes_invalid=0 send_seq=1230 receive_seq=1230 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993465 heater_bed: target=40 temp=40.0 pwm=0.030  sysload=0.19 cputime=7.696 memavail=7297840 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.205
Stats 788754.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15870 bytes_read=41860 bytes_retransmit=9 bytes_invalid=0 send_seq=1232 receive_seq=1232 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993458 heater_bed: target=40 temp=40.0 pwm=0.147  sysload=0.19 cputime=7.711 memavail=7297840 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.205
Stats 788755.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15938 bytes_read=42006 bytes_retransmit=9 bytes_invalid=0 send_seq=1237 receive_seq=1237 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993460 heater_bed: target=40 temp=40.0 pwm=0.124  sysload=0.19 cputime=7.736 memavail=7297840 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.170
Stats 788756.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=15981 bytes_read=42135 bytes_retransmit=9 bytes_invalid=0 send_seq=1241 receive_seq=1241 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993451 heater_bed: target=40 temp=40.0 pwm=0.086  sysload=0.18 cputime=7.759 memavail=7297840 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.170
Stats 788757.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=16039 bytes_read=42268 bytes_retransmit=9 bytes_invalid=0 send_seq=1245 receive_seq=1245 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993482 heater_bed: target=40 temp=40.0 pwm=0.091  sysload=0.18 cputime=7.781 memavail=7297868 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.170
Stats 788758.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=16073 bytes_read=42395 bytes_retransmit=9 bytes_invalid=0 send_seq=1248 receive_seq=1248 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993474 heater_bed: target=40 temp=40.1 pwm=0.070  sysload=0.18 cputime=7.798 memavail=7297868 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.170
Stats 788759.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=16126 bytes_read=42513 bytes_retransmit=9 bytes_invalid=0 send_seq=1252 receive_seq=1252 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993466 heater_bed: target=40 temp=40.1 pwm=0.064  sysload=0.18 cputime=7.815 memavail=7296860 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.200
Stats 788760.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=16162 bytes_read=42655 bytes_retransmit=9 bytes_invalid=0 send_seq=1255 receive_seq=1255 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993461 heater_bed: target=40 temp=40.1 pwm=0.038  sysload=0.18 cputime=7.835 memavail=7296860 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.200
Stats 788761.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=16229 bytes_read=42792 bytes_retransmit=9 bytes_invalid=0 send_seq=1260 receive_seq=1260 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993452 heater_bed: target=40 temp=40.1 pwm=0.048  sysload=0.16 cputime=7.856 memavail=7296860 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.200
Stats 788762.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=16251 bytes_read=42900 bytes_retransmit=9 bytes_invalid=0 send_seq=1262 receive_seq=1262 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993445 heater_bed: target=40 temp=40.0 pwm=0.144  sysload=0.16 cputime=7.873 memavail=7296860 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.200
Stats 788763.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=16285 bytes_read=43028 bytes_retransmit=9 bytes_invalid=0 send_seq=1265 receive_seq=1265 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993440 heater_bed: target=40 temp=40.1 pwm=0.088  sysload=0.16 cputime=7.889 memavail=7296860 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.200
Stats 788764.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=16346 bytes_read=43160 bytes_retransmit=9 bytes_invalid=0 send_seq=1269 receive_seq=1269 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993433 heater_bed: target=40 temp=40.1 pwm=0.196  sysload=0.16 cputime=7.906 memavail=7296860 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.144
Stats 788765.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16399 bytes_read=43292 bytes_retransmit=9 bytes_invalid=0 send_seq=1273 receive_seq=1273 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993429 heater_bed: target=40 temp=40.1 pwm=0.133  sysload=0.16 cputime=7.923 memavail=7296860 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.144
Stats 788766.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16464 bytes_read=43430 bytes_retransmit=9 bytes_invalid=0 send_seq=1278 receive_seq=1278 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993490 heater_bed: target=40 temp=40.0 pwm=0.224  sysload=0.15 cputime=7.949 memavail=7296860 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.200
Stats 788767.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16517 bytes_read=43562 bytes_retransmit=9 bytes_invalid=0 send_seq=1282 receive_seq=1282 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993482 heater_bed: target=40 temp=40.0 pwm=0.169  sysload=0.15 cputime=7.967 memavail=7296636 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.200
Stats 788768.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16546 bytes_read=43670 bytes_retransmit=9 bytes_invalid=0 send_seq=1284 receive_seq=1284 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993475 heater_bed: target=40 temp=40.1 pwm=0.000  sysload=0.15 cputime=7.984 memavail=7296636 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.200
Stats 788769.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16599 bytes_read=43803 bytes_retransmit=9 bytes_invalid=0 send_seq=1288 receive_seq=1288 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993470 heater_bed: target=40 temp=40.0 pwm=0.311  sysload=0.15 cputime=7.999 memavail=7296392 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.200
Stats 788770.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16683 bytes_read=43959 bytes_retransmit=9 bytes_invalid=0 send_seq=1294 receive_seq=1294 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993488 heater_bed: target=40 temp=40.0 pwm=0.077  sysload=0.15 cputime=8.017 memavail=7296392 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.190
Stats 788771.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16720 bytes_read=44072 bytes_retransmit=9 bytes_invalid=0 send_seq=1297 receive_seq=1297 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993485 heater_bed: target=40 temp=40.0 pwm=0.040  sysload=0.14 cputime=8.036 memavail=7296392 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.190
Stats 788772.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16767 bytes_read=44200 bytes_retransmit=9 bytes_invalid=0 send_seq=1300 receive_seq=1300 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993477 heater_bed: target=40 temp=40.0 pwm=0.013  sysload=0.14 cputime=8.060 memavail=7290848 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.2 pwm=0.119
Stats 788773.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16832 bytes_read=44337 bytes_retransmit=9 bytes_invalid=0 send_seq=1305 receive_seq=1305 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993465 heater_bed: target=40 temp=40.1 pwm=0.000  sysload=0.14 cputime=8.085 memavail=7299608 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.1 pwm=0.169
Stats 788774.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16869 bytes_read=44450 bytes_retransmit=9 bytes_invalid=0 send_seq=1308 receive_seq=1308 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993462 heater_bed: target=40 temp=40.0 pwm=0.037  sysload=0.14 cputime=8.110 memavail=7299356 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.169
Stats 788775.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16891 bytes_read=44587 bytes_retransmit=9 bytes_invalid=0 send_seq=1310 receive_seq=1310 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993462 heater_bed: target=40 temp=40.0 pwm=0.158  sysload=0.14 cputime=8.145 memavail=7299132 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.169
Stats 788776.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16958 bytes_read=44724 bytes_retransmit=9 bytes_invalid=0 send_seq=1315 receive_seq=1315 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993451 heater_bed: target=40 temp=40.0 pwm=0.153  sysload=0.13 cputime=8.163 memavail=7298908 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.9 pwm=0.254
Stats 788777.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17025 bytes_read=44847 bytes_retransmit=9 bytes_invalid=0 send_seq=1320 receive_seq=1320 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993442 heater_bed: target=40 temp=40.0 pwm=0.066  sysload=0.13 cputime=8.184 memavail=7298908 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=194.8 pwm=0.198
Stats 788778.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17092 bytes_read=44985 bytes_retransmit=9 bytes_invalid=0 send_seq=1325 receive_seq=1325 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993437 heater_bed: target=40 temp=40.0 pwm=0.122  sysload=0.13 cputime=8.204 memavail=7298908 print_time=11.532 buffer_time=0.000 print_stall=0 extruder: target=195 temp=195.0 pwm=0.125
Stats 788779.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17140 bytes_read=45117 bytes_retransmit=9 bytes_invalid=0 send_seq=1329 receive_seq=1329 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993472 heater_bed: target=0 temp=40.1 pwm=0.000  sysload=0.13 cputime=8.227 memavail=7297400 print_time=312.471 buffer_time=0.338 print_stall=0 extruder: target=0 temp=195.0 pwm=0.000
Stats 788780.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17146 bytes_read=45234 bytes_retransmit=9 bytes_invalid=0 send_seq=1330 receive_seq=1330 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993475 heater_bed: target=0 temp=40.0 pwm=0.000  sysload=0.13 cputime=8.242 memavail=7297400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.1 pwm=0.000
Stats 788781.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17152 bytes_read=45352 bytes_retransmit=9 bytes_invalid=0 send_seq=1331 receive_seq=1331 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993472 heater_bed: target=0 temp=40.0 pwm=0.000  sysload=0.12 cputime=8.264 memavail=7297400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.9 pwm=0.000
Stats 788782.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17158 bytes_read=45469 bytes_retransmit=9 bytes_invalid=0 send_seq=1332 receive_seq=1332 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993465 heater_bed: target=0 temp=40.0 pwm=0.000  sysload=0.12 cputime=8.284 memavail=7297400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.2 pwm=0.000
Stats 788783.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17164 bytes_read=45572 bytes_retransmit=9 bytes_invalid=0 send_seq=1333 receive_seq=1333 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993459 heater_bed: target=0 temp=40.0 pwm=0.000  sysload=0.12 cputime=8.304 memavail=7297400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.7 pwm=0.000
Stats 788784.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17170 bytes_read=45690 bytes_retransmit=9 bytes_invalid=0 send_seq=1334 receive_seq=1334 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993454 heater_bed: target=0 temp=40.0 pwm=0.000  sysload=0.12 cputime=8.321 memavail=7297400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.0 pwm=0.000
Stats 788785.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17176 bytes_read=45821 bytes_retransmit=9 bytes_invalid=0 send_seq=1335 receive_seq=1335 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993448 heater_bed: target=0 temp=40.0 pwm=0.000  sysload=0.12 cputime=8.336 memavail=7297400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=192.1 pwm=0.000
Stats 788786.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17182 bytes_read=45924 bytes_retransmit=9 bytes_invalid=0 send_seq=1336 receive_seq=1336 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993451 heater_bed: target=0 temp=40.0 pwm=0.000  sysload=0.11 cputime=8.355 memavail=7297400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.3 pwm=0.000
Stats 788787.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17188 bytes_read=46042 bytes_retransmit=9 bytes_invalid=0 send_seq=1337 receive_seq=1337 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993446 heater_bed: target=0 temp=40.0 pwm=0.000  sysload=0.11 cputime=8.378 memavail=7297400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.7 pwm=0.000
Stats 788788.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17194 bytes_read=46159 bytes_retransmit=9 bytes_invalid=0 send_seq=1338 receive_seq=1338 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993442 heater_bed: target=0 temp=39.9 pwm=0.000  sysload=0.11 cputime=8.396 memavail=7297400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.8 pwm=0.000
Stats 788789.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17200 bytes_read=46255 bytes_retransmit=9 bytes_invalid=0 send_seq=1339 receive_seq=1339 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993435 heater_bed: target=0 temp=39.9 pwm=0.000  sysload=0.11 cputime=8.413 memavail=7296168 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.1 pwm=0.000
Stats 788790.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17206 bytes_read=46379 bytes_retransmit=9 bytes_invalid=0 send_seq=1340 receive_seq=1340 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993429 heater_bed: target=0 temp=39.8 pwm=0.000  sysload=0.11 cputime=8.430 memavail=7296168 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.4 pwm=0.000
Stats 788791.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17212 bytes_read=46492 bytes_retransmit=9 bytes_invalid=0 send_seq=1341 receive_seq=1341 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993426 heater_bed: target=0 temp=39.8 pwm=0.000  sysload=0.26 cputime=8.452 memavail=7296168 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.6 pwm=0.000
Stats 788792.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17218 bytes_read=46595 bytes_retransmit=9 bytes_invalid=0 send_seq=1342 receive_seq=1342 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993459 heater_bed: target=0 temp=39.8 pwm=0.000  sysload=0.26 cputime=8.481 memavail=7296168 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.9 pwm=0.000
Stats 788793.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17224 bytes_read=46713 bytes_retransmit=9 bytes_invalid=0 send_seq=1343 receive_seq=1343 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993453 heater_bed: target=0 temp=39.8 pwm=0.000  sysload=0.26 cputime=8.503 memavail=7296168 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.2 pwm=0.000
Stats 788794.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17230 bytes_read=46830 bytes_retransmit=9 bytes_invalid=0 send_seq=1344 receive_seq=1344 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993447 heater_bed: target=0 temp=39.7 pwm=0.000  sysload=0.26 cputime=8.520 memavail=7296168 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.3 pwm=0.000
Stats 788795.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17236 bytes_read=46947 bytes_retransmit=9 bytes_invalid=0 send_seq=1345 receive_seq=1345 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993441 heater_bed: target=0 temp=39.7 pwm=0.000  sysload=0.26 cputime=8.545 memavail=7296168 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.6 pwm=0.000
Stats 788796.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17242 bytes_read=47065 bytes_retransmit=9 bytes_invalid=0 send_seq=1346 receive_seq=1346 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993436 heater_bed: target=0 temp=39.7 pwm=0.000  sysload=0.24 cputime=8.568 memavail=7296168 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.1 pwm=0.000
Stats 788797.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17248 bytes_read=47182 bytes_retransmit=9 bytes_invalid=0 send_seq=1347 receive_seq=1347 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993445 heater_bed: target=0 temp=39.6 pwm=0.000  sysload=0.24 cputime=8.588 memavail=7296168 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=183.2 pwm=0.000
Stats 788798.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17254 bytes_read=47285 bytes_retransmit=9 bytes_invalid=0 send_seq=1348 receive_seq=1348 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993440 heater_bed: target=0 temp=39.6 pwm=0.000  sysload=0.24 cputime=8.605 memavail=7296168 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=182.6 pwm=0.000
Stats 788799.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17260 bytes_read=47403 bytes_retransmit=9 bytes_invalid=0 send_seq=1349 receive_seq=1349 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993434 heater_bed: target=0 temp=39.5 pwm=0.000  sysload=0.24 cputime=8.622 memavail=7296176 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=181.9 pwm=0.000
Stats 788800.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17266 bytes_read=47520 bytes_retransmit=9 bytes_invalid=0 send_seq=1350 receive_seq=1350 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993430 heater_bed: target=0 temp=39.5 pwm=0.000  sysload=0.24 cputime=8.638 memavail=7296176 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=181.1 pwm=0.000
Stats 788801.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17272 bytes_read=47637 bytes_retransmit=9 bytes_invalid=0 send_seq=1351 receive_seq=1351 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993458 heater_bed: target=0 temp=39.4 pwm=0.000  sysload=0.22 cputime=8.659 memavail=7296176 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=180.5 pwm=0.000
Stats 788802.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17278 bytes_read=47755 bytes_retransmit=9 bytes_invalid=0 send_seq=1352 receive_seq=1352 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993451 heater_bed: target=0 temp=39.4 pwm=0.000  sysload=0.22 cputime=8.678 memavail=7296176 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=179.9 pwm=0.000
Stats 788803.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17284 bytes_read=47872 bytes_retransmit=9 bytes_invalid=0 send_seq=1353 receive_seq=1353 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993444 heater_bed: target=0 temp=39.3 pwm=0.000  sysload=0.22 cputime=8.695 memavail=7296180 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=179.0 pwm=0.000
Stats 788804.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17290 bytes_read=47975 bytes_retransmit=9 bytes_invalid=0 send_seq=1354 receive_seq=1354 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993437 heater_bed: target=0 temp=39.3 pwm=0.000  sysload=0.22 cputime=8.707 memavail=7296180 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.4 pwm=0.000
Stats 788805.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17296 bytes_read=48093 bytes_retransmit=9 bytes_invalid=0 send_seq=1355 receive_seq=1355 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993433 heater_bed: target=0 temp=39.4 pwm=0.000  sysload=0.22 cputime=8.722 memavail=7296180 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.8 pwm=0.000
Stats 788806.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17302 bytes_read=48224 bytes_retransmit=9 bytes_invalid=0 send_seq=1356 receive_seq=1356 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993479 heater_bed: target=0 temp=39.3 pwm=0.000  sysload=0.20 cputime=8.744 memavail=7296180 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.0 pwm=0.000
Stats 788807.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17308 bytes_read=48327 bytes_retransmit=9 bytes_invalid=0 send_seq=1357 receive_seq=1357 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993470 heater_bed: target=0 temp=39.3 pwm=0.000  sysload=0.20 cputime=8.760 memavail=7296180 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=176.5 pwm=0.000
Stats 788808.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17314 bytes_read=48445 bytes_retransmit=9 bytes_invalid=0 send_seq=1358 receive_seq=1358 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993463 heater_bed: target=0 temp=39.2 pwm=0.000  sysload=0.20 cputime=8.774 memavail=7296180 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.7 pwm=0.000
Stats 788809.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17320 bytes_read=48562 bytes_retransmit=9 bytes_invalid=0 send_seq=1359 receive_seq=1359 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993457 heater_bed: target=0 temp=39.2 pwm=0.000  sysload=0.20 cputime=8.791 memavail=7296184 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.1 pwm=0.000
Stats 788810.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17326 bytes_read=48665 bytes_retransmit=9 bytes_invalid=0 send_seq=1360 receive_seq=1360 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993494 heater_bed: target=0 temp=39.1 pwm=0.000  sysload=0.20 cputime=8.812 memavail=7296184 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=174.4 pwm=0.000
Stats 788811.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17332 bytes_read=48797 bytes_retransmit=9 bytes_invalid=0 send_seq=1361 receive_seq=1361 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993483 heater_bed: target=0 temp=39.1 pwm=0.000  sysload=0.27 cputime=8.831 memavail=7296184 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.9 pwm=0.000
Stats 788812.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17338 bytes_read=48914 bytes_retransmit=9 bytes_invalid=0 send_seq=1362 receive_seq=1362 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993476 heater_bed: target=0 temp=39.0 pwm=0.000  sysload=0.27 cputime=8.845 memavail=7296184 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.1 pwm=0.000
Stats 788813.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17344 bytes_read=49017 bytes_retransmit=9 bytes_invalid=0 send_seq=1363 receive_seq=1363 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993469 heater_bed: target=0 temp=39.0 pwm=0.000  sysload=0.27 cputime=8.859 memavail=7296184 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=172.4 pwm=0.000
Stats 788814.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17350 bytes_read=49135 bytes_retransmit=9 bytes_invalid=0 send_seq=1364 receive_seq=1364 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993473 heater_bed: target=0 temp=39.0 pwm=0.000  sysload=0.27 cputime=8.877 memavail=7296184 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=171.7 pwm=0.000
Stats 788815.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17356 bytes_read=49252 bytes_retransmit=9 bytes_invalid=0 send_seq=1365 receive_seq=1365 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993516 heater_bed: target=0 temp=38.9 pwm=0.000  sysload=0.27 cputime=8.898 memavail=7296184 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=171.1 pwm=0.000
Stats 788816.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17362 bytes_read=49369 bytes_retransmit=9 bytes_invalid=0 send_seq=1366 receive_seq=1366 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993507 heater_bed: target=0 temp=38.9 pwm=0.000  sysload=0.24 cputime=8.912 memavail=7296184 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.6 pwm=0.000
Stats 788817.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17374 bytes_read=49517 bytes_retransmit=9 bytes_invalid=0 send_seq=1368 receive_seq=1368 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993487 heater_bed: target=0 temp=38.8 pwm=0.000  sysload=0.24 cputime=8.928 memavail=7296184 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.7 pwm=0.000
Stats 788818.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17380 bytes_read=49620 bytes_retransmit=9 bytes_invalid=0 send_seq=1369 receive_seq=1369 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993487 heater_bed: target=0 temp=38.7 pwm=0.000  sysload=0.24 cputime=8.941 memavail=7296188 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.2 pwm=0.000
Stats 788819.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17386 bytes_read=49723 bytes_retransmit=9 bytes_invalid=0 send_seq=1370 receive_seq=1370 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993477 heater_bed: target=0 temp=38.7 pwm=0.000  sysload=0.24 cputime=8.956 memavail=7295208 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=168.7 pwm=0.000
Stats 788820.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17392 bytes_read=49855 bytes_retransmit=9 bytes_invalid=0 send_seq=1371 receive_seq=1371 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993468 heater_bed: target=0 temp=38.7 pwm=0.000  sysload=0.24 cputime=8.969 memavail=7295208 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=167.9 pwm=0.000
Stats 788821.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17398 bytes_read=49972 bytes_retransmit=9 bytes_invalid=0 send_seq=1372 receive_seq=1372 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993460 heater_bed: target=0 temp=38.6 pwm=0.000  sysload=0.22 cputime=8.987 memavail=7295208 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=167.4 pwm=0.000
Stats 788822.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17404 bytes_read=50075 bytes_retransmit=9 bytes_invalid=0 send_seq=1373 receive_seq=1373 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993455 heater_bed: target=0 temp=38.6 pwm=0.000  sysload=0.22 cputime=9.000 memavail=7295104 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.8 pwm=0.000
Stats 788823.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17410 bytes_read=50207 bytes_retransmit=9 bytes_invalid=0 send_seq=1374 receive_seq=1374 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993490 heater_bed: target=0 temp=38.6 pwm=0.000  sysload=0.22 cputime=9.017 memavail=7298032 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.1 pwm=0.000
Stats 788824.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17416 bytes_read=50310 bytes_retransmit=9 bytes_invalid=0 send_seq=1375 receive_seq=1375 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993481 heater_bed: target=0 temp=38.5 pwm=0.000  sysload=0.22 cputime=9.030 memavail=7298032 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.5 pwm=0.000
Stats 788825.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17422 bytes_read=50406 bytes_retransmit=9 bytes_invalid=0 send_seq=1376 receive_seq=1376 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993471 heater_bed: target=0 temp=38.5 pwm=0.000  sysload=0.22 cputime=9.047 memavail=7297780 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.0 pwm=0.000
Stats 788826.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17428 bytes_read=50543 bytes_retransmit=9 bytes_invalid=0 send_seq=1377 receive_seq=1377 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993464 heater_bed: target=0 temp=38.4 pwm=0.000  sysload=0.21 cputime=9.063 memavail=7297780 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=164.2 pwm=0.000
Stats 788827.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17434 bytes_read=50646 bytes_retransmit=9 bytes_invalid=0 send_seq=1378 receive_seq=1378 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993498 heater_bed: target=0 temp=38.4 pwm=0.000  sysload=0.21 cputime=9.078 memavail=7297780 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.7 pwm=0.000
Stats 788828.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17440 bytes_read=50749 bytes_retransmit=9 bytes_invalid=0 send_seq=1379 receive_seq=1379 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993486 heater_bed: target=0 temp=38.4 pwm=0.000  sysload=0.21 cputime=9.097 memavail=7297780 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.2 pwm=0.000
Stats 788829.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17446 bytes_read=50881 bytes_retransmit=9 bytes_invalid=0 send_seq=1380 receive_seq=1380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993476 heater_bed: target=0 temp=38.4 pwm=0.000  sysload=0.21 cputime=9.120 memavail=7297284 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.5 pwm=0.000
Stats 788830.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17452 bytes_read=50984 bytes_retransmit=9 bytes_invalid=0 send_seq=1381 receive_seq=1381 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993468 heater_bed: target=0 temp=38.3 pwm=0.000  sysload=0.21 cputime=9.137 memavail=7297284 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.9 pwm=0.000
Stats 788831.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17458 bytes_read=51101 bytes_retransmit=9 bytes_invalid=0 send_seq=1382 receive_seq=1382 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993460 heater_bed: target=0 temp=38.2 pwm=0.000  sysload=0.19 cputime=9.152 memavail=7297284 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.4 pwm=0.000
Stats 788832.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17464 bytes_read=51233 bytes_retransmit=9 bytes_invalid=0 send_seq=1383 receive_seq=1383 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993485 heater_bed: target=0 temp=38.2 pwm=0.000  sysload=0.19 cputime=9.173 memavail=7297060 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.7 pwm=0.000
Stats 788833.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17470 bytes_read=51336 bytes_retransmit=9 bytes_invalid=0 send_seq=1384 receive_seq=1384 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993475 heater_bed: target=0 temp=38.2 pwm=0.000  sysload=0.19 cputime=9.194 memavail=7297060 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.1 pwm=0.000
Stats 788834.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17476 bytes_read=51439 bytes_retransmit=9 bytes_invalid=0 send_seq=1385 receive_seq=1385 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993464 heater_bed: target=0 temp=38.1 pwm=0.000  sysload=0.19 cputime=9.209 memavail=7297060 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=159.6 pwm=0.000
Stats 788835.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17482 bytes_read=51571 bytes_retransmit=9 bytes_invalid=0 send_seq=1386 receive_seq=1386 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993457 heater_bed: target=0 temp=38.1 pwm=0.000  sysload=0.19 cputime=9.227 memavail=7297060 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.9 pwm=0.000
Stats 788836.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17488 bytes_read=51688 bytes_retransmit=9 bytes_invalid=0 send_seq=1387 receive_seq=1387 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993496 heater_bed: target=0 temp=38.0 pwm=0.000  sysload=0.17 cputime=9.246 memavail=7296836 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.3 pwm=0.000
Stats 788837.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17494 bytes_read=51791 bytes_retransmit=9 bytes_invalid=0 send_seq=1388 receive_seq=1388 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993485 heater_bed: target=0 temp=38.1 pwm=0.000  sysload=0.17 cputime=9.262 memavail=7296836 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.9 pwm=0.000
Stats 788838.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17500 bytes_read=51923 bytes_retransmit=9 bytes_invalid=0 send_seq=1389 receive_seq=1389 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993475 heater_bed: target=0 temp=38.0 pwm=0.000  sysload=0.17 cputime=9.286 memavail=7296836 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.2 pwm=0.000
Stats 788839.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17506 bytes_read=52026 bytes_retransmit=9 bytes_invalid=0 send_seq=1390 receive_seq=1390 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993466 heater_bed: target=0 temp=38.0 pwm=0.000  sysload=0.17 cputime=9.306 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.7 pwm=0.000
Stats 788840.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17512 bytes_read=52129 bytes_retransmit=9 bytes_invalid=0 send_seq=1391 receive_seq=1391 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993459 heater_bed: target=0 temp=37.9 pwm=0.000  sysload=0.17 cputime=9.320 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.2 pwm=0.000
Stats 788841.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17518 bytes_read=52275 bytes_retransmit=9 bytes_invalid=0 send_seq=1392 receive_seq=1392 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993450 heater_bed: target=0 temp=37.8 pwm=0.000  sysload=0.24 cputime=9.337 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.5 pwm=0.000
Stats 788842.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17524 bytes_read=52378 bytes_retransmit=9 bytes_invalid=0 send_seq=1393 receive_seq=1393 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993442 heater_bed: target=0 temp=37.9 pwm=0.000  sysload=0.24 cputime=9.352 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.0 pwm=0.000
Stats 788843.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17530 bytes_read=52481 bytes_retransmit=9 bytes_invalid=0 send_seq=1394 receive_seq=1394 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993433 heater_bed: target=0 temp=37.8 pwm=0.000  sysload=0.24 cputime=9.370 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.5 pwm=0.000
Stats 788844.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17536 bytes_read=52613 bytes_retransmit=9 bytes_invalid=0 send_seq=1395 receive_seq=1395 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993428 heater_bed: target=0 temp=37.7 pwm=0.000  sysload=0.24 cputime=9.388 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.8 pwm=0.000
Stats 788845.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17542 bytes_read=52716 bytes_retransmit=9 bytes_invalid=0 send_seq=1396 receive_seq=1396 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993439 heater_bed: target=0 temp=37.7 pwm=0.000  sysload=0.24 cputime=9.404 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.4 pwm=0.000
Stats 788846.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17548 bytes_read=52848 bytes_retransmit=9 bytes_invalid=0 send_seq=1397 receive_seq=1397 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993430 heater_bed: target=0 temp=37.7 pwm=0.000  sysload=0.22 cputime=9.417 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.9 pwm=0.000
Stats 788847.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17554 bytes_read=52965 bytes_retransmit=9 bytes_invalid=0 send_seq=1398 receive_seq=1398 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993423 heater_bed: target=0 temp=37.7 pwm=0.000  sysload=0.22 cputime=9.439 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.2 pwm=0.000
Stats 788848.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17560 bytes_read=53068 bytes_retransmit=9 bytes_invalid=0 send_seq=1399 receive_seq=1399 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993415 heater_bed: target=0 temp=37.7 pwm=0.000  sysload=0.22 cputime=9.456 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.7 pwm=0.000
Stats 788849.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17566 bytes_read=53186 bytes_retransmit=9 bytes_invalid=0 send_seq=1400 receive_seq=1400 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993429 heater_bed: target=0 temp=37.6 pwm=0.000  sysload=0.22 cputime=9.472 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.2 pwm=0.000
Stats 788850.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17572 bytes_read=53303 bytes_retransmit=9 bytes_invalid=0 send_seq=1401 receive_seq=1401 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993422 heater_bed: target=0 temp=37.5 pwm=0.000  sysload=0.22 cputime=9.488 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.6 pwm=0.000
Stats 788851.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17578 bytes_read=53420 bytes_retransmit=9 bytes_invalid=0 send_seq=1402 receive_seq=1402 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993415 heater_bed: target=0 temp=37.5 pwm=0.000  sysload=0.20 cputime=9.504 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.1 pwm=0.000
Stats 788852.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17584 bytes_read=53538 bytes_retransmit=9 bytes_invalid=0 send_seq=1403 receive_seq=1403 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993412 heater_bed: target=0 temp=37.4 pwm=0.000  sysload=0.20 cputime=9.526 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.6 pwm=0.000
Stats 788853.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17590 bytes_read=53655 bytes_retransmit=9 bytes_invalid=0 send_seq=1404 receive_seq=1404 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993407 heater_bed: target=0 temp=37.4 pwm=0.000  sysload=0.20 cputime=9.549 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.0 pwm=0.000
Stats 788854.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17596 bytes_read=53758 bytes_retransmit=9 bytes_invalid=0 send_seq=1405 receive_seq=1405 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993433 heater_bed: target=0 temp=37.4 pwm=0.000  sysload=0.20 cputime=9.573 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.5 pwm=0.000
Stats 788855.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17602 bytes_read=53876 bytes_retransmit=9 bytes_invalid=0 send_seq=1406 receive_seq=1406 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993427 heater_bed: target=0 temp=37.3 pwm=0.000  sysload=0.20 cputime=9.595 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.1 pwm=0.000
Stats 788856.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17608 bytes_read=54007 bytes_retransmit=9 bytes_invalid=0 send_seq=1407 receive_seq=1407 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993419 heater_bed: target=0 temp=37.3 pwm=0.000  sysload=0.19 cputime=9.618 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.5 pwm=0.000
Stats 788857.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17614 bytes_read=54110 bytes_retransmit=9 bytes_invalid=0 send_seq=1408 receive_seq=1408 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993413 heater_bed: target=0 temp=37.3 pwm=0.000  sysload=0.19 cputime=9.641 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.0 pwm=0.000
Stats 788858.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17620 bytes_read=54228 bytes_retransmit=9 bytes_invalid=0 send_seq=1409 receive_seq=1409 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993409 heater_bed: target=0 temp=37.3 pwm=0.000  sysload=0.19 cputime=9.660 memavail=7296616 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.5 pwm=0.000
Stats 788859.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17626 bytes_read=54345 bytes_retransmit=9 bytes_invalid=0 send_seq=1410 receive_seq=1410 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993402 heater_bed: target=0 temp=37.2 pwm=0.000  sysload=0.19 cputime=9.676 memavail=7296624 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.9 pwm=0.000
Stats 788860.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17632 bytes_read=54446 bytes_retransmit=9 bytes_invalid=0 send_seq=1411 receive_seq=1411 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993395 heater_bed: target=0 temp=37.1 pwm=0.000  sysload=0.19 cputime=9.690 memavail=7296624 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.4 pwm=0.000
Stats 788861.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17638 bytes_read=54570 bytes_retransmit=9 bytes_invalid=0 send_seq=1412 receive_seq=1412 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993391 heater_bed: target=0 temp=37.2 pwm=0.000  sysload=0.17 cputime=9.708 memavail=7296624 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.0 pwm=0.000
Stats 788862.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17644 bytes_read=54680 bytes_retransmit=9 bytes_invalid=0 send_seq=1413 receive_seq=1413 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993387 heater_bed: target=0 temp=37.1 pwm=0.000  sysload=0.17 cputime=9.722 memavail=7296400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.4 pwm=0.000
Stats 788863.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17650 bytes_read=54783 bytes_retransmit=9 bytes_invalid=0 send_seq=1414 receive_seq=1414 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993437 heater_bed: target=0 temp=37.1 pwm=0.000  sysload=0.17 cputime=9.741 memavail=7296400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.9 pwm=0.000
Stats 788864.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17656 bytes_read=54901 bytes_retransmit=9 bytes_invalid=0 send_seq=1415 receive_seq=1415 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993431 heater_bed: target=0 temp=37.0 pwm=0.000  sysload=0.17 cputime=9.765 memavail=7296400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.5 pwm=0.000
Stats 788865.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17662 bytes_read=55018 bytes_retransmit=9 bytes_invalid=0 send_seq=1416 receive_seq=1416 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993425 heater_bed: target=0 temp=37.0 pwm=0.000  sysload=0.17 cputime=9.784 memavail=7296400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.9 pwm=0.000
Stats 788866.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17668 bytes_read=55121 bytes_retransmit=9 bytes_invalid=0 send_seq=1417 receive_seq=1417 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993417 heater_bed: target=0 temp=37.0 pwm=0.000  sysload=0.16 cputime=9.799 memavail=7296400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.4 pwm=0.000
Stats 788867.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17674 bytes_read=55253 bytes_retransmit=9 bytes_invalid=0 send_seq=1418 receive_seq=1418 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993437 heater_bed: target=0 temp=36.9 pwm=0.000  sysload=0.16 cputime=9.820 memavail=7296400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.0 pwm=0.000
Stats 788868.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17680 bytes_read=55370 bytes_retransmit=9 bytes_invalid=0 send_seq=1419 receive_seq=1419 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993428 heater_bed: target=0 temp=36.9 pwm=0.000  sysload=0.16 cputime=9.839 memavail=7296400 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.4 pwm=0.000
Stats 788869.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17686 bytes_read=55473 bytes_retransmit=9 bytes_invalid=0 send_seq=1420 receive_seq=1420 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993421 heater_bed: target=0 temp=36.9 pwm=0.000  sysload=0.16 cputime=9.859 memavail=7296152 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.0 pwm=0.000
Stats 788870.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17692 bytes_read=55591 bytes_retransmit=9 bytes_invalid=0 send_seq=1421 receive_seq=1421 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993414 heater_bed: target=0 temp=36.9 pwm=0.000  sysload=0.16 cputime=9.881 memavail=7296152 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.5 pwm=0.000
Stats 788871.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17698 bytes_read=55708 bytes_retransmit=9 bytes_invalid=0 send_seq=1422 receive_seq=1422 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993409 heater_bed: target=0 temp=36.8 pwm=0.000  sysload=0.14 cputime=9.898 memavail=7296152 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.9 pwm=0.000
Stats 788872.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17704 bytes_read=55825 bytes_retransmit=9 bytes_invalid=0 send_seq=1423 receive_seq=1423 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993450 heater_bed: target=0 temp=36.8 pwm=0.000  sysload=0.14 cputime=9.918 memavail=7296152 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.5 pwm=0.000
Stats 788873.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17710 bytes_read=55943 bytes_retransmit=9 bytes_invalid=0 send_seq=1424 receive_seq=1424 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993441 heater_bed: target=0 temp=36.7 pwm=0.000  sysload=0.14 cputime=9.937 memavail=7296152 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.1 pwm=0.000
Stats 788874.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17716 bytes_read=56060 bytes_retransmit=9 bytes_invalid=0 send_seq=1425 receive_seq=1425 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993432 heater_bed: target=0 temp=36.7 pwm=0.000  sysload=0.14 cputime=9.957 memavail=7296152 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.5 pwm=0.000
Stats 788875.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17722 bytes_read=56163 bytes_retransmit=9 bytes_invalid=0 send_seq=1426 receive_seq=1426 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993427 heater_bed: target=0 temp=36.7 pwm=0.000  sysload=0.14 cputime=9.978 memavail=7296152 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.1 pwm=0.000
Stats 788876.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17728 bytes_read=56281 bytes_retransmit=9 bytes_invalid=0 send_seq=1427 receive_seq=1427 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993423 heater_bed: target=0 temp=36.6 pwm=0.000  sysload=0.13 cputime=9.994 memavail=7296152 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.7 pwm=0.000
Stats 788877.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17734 bytes_read=56412 bytes_retransmit=9 bytes_invalid=0 send_seq=1428 receive_seq=1428 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993418 heater_bed: target=0 temp=36.6 pwm=0.000  sysload=0.13 cputime=10.009 memavail=7296152 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.1 pwm=0.000
Stats 788878.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17740 bytes_read=56515 bytes_retransmit=9 bytes_invalid=0 send_seq=1429 receive_seq=1429 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993412 heater_bed: target=0 temp=36.6 pwm=0.000  sysload=0.13 cputime=10.024 memavail=7295928 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.7 pwm=0.000
Stats 788879.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17752 bytes_read=56649 bytes_retransmit=9 bytes_invalid=0 send_seq=1431 receive_seq=1431 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993400 heater_bed: target=0 temp=36.5 pwm=0.000  sysload=0.13 cputime=10.047 memavail=7295676 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.2 pwm=0.000
Stats 788880.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17758 bytes_read=56766 bytes_retransmit=9 bytes_invalid=0 send_seq=1432 receive_seq=1432 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993425 heater_bed: target=0 temp=36.5 pwm=0.000  sysload=0.13 cputime=10.067 memavail=7295676 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.7 pwm=0.000
Stats 788881.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17764 bytes_read=56869 bytes_retransmit=9 bytes_invalid=0 send_seq=1433 receive_seq=1433 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993419 heater_bed: target=0 temp=36.4 pwm=0.000  sysload=0.12 cputime=10.083 memavail=7295676 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.2 pwm=0.000
Stats 788882.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17770 bytes_read=57001 bytes_retransmit=9 bytes_invalid=0 send_seq=1434 receive_seq=1434 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993412 heater_bed: target=0 temp=36.4 pwm=0.000  sysload=0.12 cputime=10.103 memavail=7295676 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.8 pwm=0.000
Stats 788883.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17776 bytes_read=57118 bytes_retransmit=9 bytes_invalid=0 send_seq=1435 receive_seq=1435 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993407 heater_bed: target=0 temp=36.4 pwm=0.000  sysload=0.12 cputime=10.123 memavail=7295676 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.3 pwm=0.000
Stats 788884.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17782 bytes_read=57221 bytes_retransmit=9 bytes_invalid=0 send_seq=1436 receive_seq=1436 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993401 heater_bed: target=0 temp=36.3 pwm=0.000  sysload=0.12 cputime=10.142 memavail=7295676 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.9 pwm=0.000
Stats 788885.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17788 bytes_read=57339 bytes_retransmit=9 bytes_invalid=0 send_seq=1437 receive_seq=1437 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993396 heater_bed: target=0 temp=36.4 pwm=0.000  sysload=0.12 cputime=10.158 memavail=7295676 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.5 pwm=0.000
Stats 788886.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17794 bytes_read=57456 bytes_retransmit=9 bytes_invalid=0 send_seq=1438 receive_seq=1438 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993389 heater_bed: target=0 temp=36.2 pwm=0.000  sysload=0.11 cputime=10.172 memavail=7295676 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.0 pwm=0.000
Stats 788887.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17800 bytes_read=57573 bytes_retransmit=9 bytes_invalid=0 send_seq=1439 receive_seq=1439 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993386 heater_bed: target=0 temp=36.3 pwm=0.000  sysload=0.11 cputime=10.186 memavail=7295676 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.5 pwm=0.000
Stats 788888.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17806 bytes_read=57691 bytes_retransmit=9 bytes_invalid=0 send_seq=1440 receive_seq=1440 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993384 heater_bed: target=0 temp=36.2 pwm=0.000  sysload=0.11 cputime=10.204 memavail=7295676 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.1 pwm=0.000
Stats 788889.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17812 bytes_read=57808 bytes_retransmit=9 bytes_invalid=0 send_seq=1441 receive_seq=1441 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993382 heater_bed: target=0 temp=36.2 pwm=0.000  sysload=0.11 cputime=10.221 memavail=7296180 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.6 pwm=0.000
Stats 788890.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17818 bytes_read=57911 bytes_retransmit=9 bytes_invalid=0 send_seq=1442 receive_seq=1442 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993378 heater_bed: target=0 temp=36.2 pwm=0.000  sysload=0.11 cputime=10.236 memavail=7296180 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.2 pwm=0.000
Stats 788891.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17824 bytes_read=58029 bytes_retransmit=9 bytes_invalid=0 send_seq=1443 receive_seq=1443 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993375 heater_bed: target=0 temp=36.1 pwm=0.000  sysload=0.26 cputime=10.249 memavail=7296180 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.8 pwm=0.000
Stats 788892.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17830 bytes_read=58160 bytes_retransmit=9 bytes_invalid=0 send_seq=1444 receive_seq=1444 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993373 heater_bed: target=0 temp=36.1 pwm=0.000  sysload=0.26 cputime=10.262 memavail=7296180 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.3 pwm=0.000
Stats 788893.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17836 bytes_read=58263 bytes_retransmit=9 bytes_invalid=0 send_seq=1445 receive_seq=1445 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993370 heater_bed: target=0 temp=36.1 pwm=0.000  sysload=0.26 cputime=10.275 memavail=7297168 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.9 pwm=0.000
Stats 788894.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17842 bytes_read=58381 bytes_retransmit=9 bytes_invalid=0 send_seq=1446 receive_seq=1446 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993437 heater_bed: target=0 temp=36.0 pwm=0.000  sysload=0.26 cputime=10.294 memavail=7297168 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.5 pwm=0.000
Stats 788895.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17848 bytes_read=58498 bytes_retransmit=9 bytes_invalid=0 send_seq=1447 receive_seq=1447 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993426 heater_bed: target=0 temp=36.0 pwm=0.000  sysload=0.26 cputime=10.322 memavail=7296720 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.9 pwm=0.000
Stats 788896.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17854 bytes_read=58597 bytes_retransmit=9 bytes_invalid=0 send_seq=1448 receive_seq=1448 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993415 heater_bed: target=0 temp=36.0 pwm=0.000  sysload=0.32 cputime=10.339 memavail=7296496 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.6 pwm=0.000
Stats 788897.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17860 bytes_read=58721 bytes_retransmit=9 bytes_invalid=0 send_seq=1449 receive_seq=1449 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993405 heater_bed: target=0 temp=35.9 pwm=0.000  sysload=0.32 cputime=10.354 memavail=7296496 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.1 pwm=0.000
Stats 788898.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17866 bytes_read=58832 bytes_retransmit=9 bytes_invalid=0 send_seq=1450 receive_seq=1450 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993409 heater_bed: target=0 temp=35.9 pwm=0.000  sysload=0.32 cputime=10.368 memavail=7296496 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.6 pwm=0.000
Stats 788899.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17872 bytes_read=58935 bytes_retransmit=9 bytes_invalid=0 send_seq=1451 receive_seq=1451 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993411 heater_bed: target=0 temp=35.9 pwm=0.000  sysload=0.32 cputime=10.380 memavail=7295992 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.3 pwm=0.000
Stats 788900.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17878 bytes_read=59053 bytes_retransmit=9 bytes_invalid=0 send_seq=1452 receive_seq=1452 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993404 heater_bed: target=0 temp=35.9 pwm=0.000  sysload=0.32 cputime=10.392 memavail=7295992 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.9 pwm=0.000
Stats 788901.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17884 bytes_read=59170 bytes_retransmit=9 bytes_invalid=0 send_seq=1453 receive_seq=1453 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993400 heater_bed: target=0 temp=35.8 pwm=0.000  sysload=0.38 cputime=10.410 memavail=7295992 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.3 pwm=0.000
Stats 788902.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17890 bytes_read=59287 bytes_retransmit=9 bytes_invalid=0 send_seq=1454 receive_seq=1454 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993456 heater_bed: target=0 temp=35.8 pwm=0.000  sysload=0.38 cputime=10.429 memavail=7295992 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.0 pwm=0.000
Stats 788903.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17896 bytes_read=59405 bytes_retransmit=9 bytes_invalid=0 send_seq=1455 receive_seq=1455 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993450 heater_bed: target=0 temp=35.8 pwm=0.000  sysload=0.38 cputime=10.442 memavail=7295992 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.6 pwm=0.000
Stats 788904.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17902 bytes_read=59522 bytes_retransmit=9 bytes_invalid=0 send_seq=1456 receive_seq=1456 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993441 heater_bed: target=0 temp=35.7 pwm=0.000  sysload=0.38 cputime=10.454 memavail=7295992 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.1 pwm=0.000
Stats 788905.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17908 bytes_read=59625 bytes_retransmit=9 bytes_invalid=0 send_seq=1457 receive_seq=1457 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993433 heater_bed: target=0 temp=35.7 pwm=0.000  sysload=0.38 cputime=10.466 memavail=7295992 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.7 pwm=0.000
Stats 788906.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17914 bytes_read=59743 bytes_retransmit=9 bytes_invalid=0 send_seq=1458 receive_seq=1458 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993427 heater_bed: target=0 temp=35.7 pwm=0.000  sysload=0.35 cputime=10.484 memavail=7295992 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.3 pwm=0.000
Stats 788907.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17920 bytes_read=59874 bytes_retransmit=9 bytes_invalid=0 send_seq=1459 receive_seq=1459 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993421 heater_bed: target=0 temp=35.6 pwm=0.000  sysload=0.35 cputime=10.502 memavail=7295992 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.9 pwm=0.000
Stats 788908.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17926 bytes_read=59977 bytes_retransmit=9 bytes_invalid=0 send_seq=1460 receive_seq=1460 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993415 heater_bed: target=0 temp=35.6 pwm=0.000  sysload=0.35 cputime=10.516 memavail=7295992 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.5 pwm=0.000
Stats 788909.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17932 bytes_read=60095 bytes_retransmit=9 bytes_invalid=0 send_seq=1461 receive_seq=1461 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993409 heater_bed: target=0 temp=35.6 pwm=0.000  sysload=0.35 cputime=10.529 memavail=7296000 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.1 pwm=0.000
Stats 788910.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17938 bytes_read=60214 bytes_retransmit=9 bytes_invalid=0 send_seq=1462 receive_seq=1462 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993410 heater_bed: target=0 temp=35.6 pwm=0.000  sysload=0.35 cputime=10.544 memavail=7296000 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.6 pwm=0.000
Stats 788911.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17944 bytes_read=60320 bytes_retransmit=9 bytes_invalid=0 send_seq=1463 receive_seq=1463 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993411 heater_bed: target=0 temp=35.5 pwm=0.000  sysload=0.32 cputime=10.564 memavail=7296000 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.2 pwm=0.000
Stats 788912.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17950 bytes_read=60455 bytes_retransmit=9 bytes_invalid=0 send_seq=1464 receive_seq=1464 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993404 heater_bed: target=0 temp=35.5 pwm=0.000  sysload=0.32 cputime=10.580 memavail=7296000 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.9 pwm=0.000
Stats 788913.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17956 bytes_read=60576 bytes_retransmit=9 bytes_invalid=0 send_seq=1465 receive_seq=1465 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993398 heater_bed: target=0 temp=35.5 pwm=0.000  sysload=0.32 cputime=10.593 memavail=7296000 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.4 pwm=0.000
Stats 788914.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17962 bytes_read=60682 bytes_retransmit=9 bytes_invalid=0 send_seq=1466 receive_seq=1466 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993394 heater_bed: target=0 temp=35.4 pwm=0.000  sysload=0.32 cputime=10.607 memavail=7296000 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.0 pwm=0.000
Stats 788915.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17968 bytes_read=60803 bytes_retransmit=9 bytes_invalid=0 send_seq=1467 receive_seq=1467 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993391 heater_bed: target=0 temp=35.4 pwm=0.000  sysload=0.32 cputime=10.636 memavail=7296000 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.7 pwm=0.000
Stats 788916.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17974 bytes_read=60924 bytes_retransmit=9 bytes_invalid=0 send_seq=1468 receive_seq=1468 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993386 heater_bed: target=0 temp=35.4 pwm=0.000  sysload=0.29 cputime=10.661 memavail=7296000 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.2 pwm=0.000
Stats 788917.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17980 bytes_read=61044 bytes_retransmit=9 bytes_invalid=0 send_seq=1469 receive_seq=1469 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993383 heater_bed: target=0 temp=35.3 pwm=0.000  sysload=0.29 cputime=10.681 memavail=7296000 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.8 pwm=0.000
Stats 788918.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17986 bytes_read=61165 bytes_retransmit=9 bytes_invalid=0 send_seq=1470 receive_seq=1470 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993381 heater_bed: target=0 temp=35.3 pwm=0.000  sysload=0.29 cputime=10.700 memavail=7296000 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.5 pwm=0.000
Stats 788919.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17992 bytes_read=61286 bytes_retransmit=9 bytes_invalid=0 send_seq=1471 receive_seq=1471 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993377 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.29 cputime=10.726 memavail=7296508 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.0 pwm=0.000
Stats 788920.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17998 bytes_read=61392 bytes_retransmit=9 bytes_invalid=0 send_seq=1472 receive_seq=1472 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993425 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.29 cputime=10.752 memavail=7296508 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.6 pwm=0.000
Stats 788921.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18004 bytes_read=61513 bytes_retransmit=9 bytes_invalid=0 send_seq=1473 receive_seq=1473 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993418 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.27 cputime=10.772 memavail=7296508 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.3 pwm=0.000
Stats 788922.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18010 bytes_read=61648 bytes_retransmit=9 bytes_invalid=0 send_seq=1474 receive_seq=1474 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993411 heater_bed: target=0 temp=35.1 pwm=0.000  sysload=0.27 cputime=10.792 memavail=7296508 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.8 pwm=0.000
Stats 788923.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18016 bytes_read=61754 bytes_retransmit=9 bytes_invalid=0 send_seq=1475 receive_seq=1475 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993405 heater_bed: target=0 temp=35.1 pwm=0.000  sysload=0.27 cputime=10.808 memavail=7296508 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.5 pwm=0.000
Stats 788924.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18022 bytes_read=61875 bytes_retransmit=9 bytes_invalid=0 send_seq=1476 receive_seq=1476 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993401 heater_bed: target=0 temp=35.1 pwm=0.000  sysload=0.27 cputime=10.826 memavail=7296508 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.2 pwm=0.000
Stats 788925.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18028 bytes_read=61996 bytes_retransmit=9 bytes_invalid=0 send_seq=1477 receive_seq=1477 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993394 heater_bed: target=0 temp=35.0 pwm=0.000  sysload=0.27 cputime=10.851 memavail=7296508 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.7 pwm=0.000
Stats 788926.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18034 bytes_read=62102 bytes_retransmit=9 bytes_invalid=0 send_seq=1478 receive_seq=1478 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993388 heater_bed: target=0 temp=35.1 pwm=0.000  sysload=0.25 cputime=10.870 memavail=7296536 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.3 pwm=0.000
Stats 788927.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18040 bytes_read=62237 bytes_retransmit=9 bytes_invalid=0 send_seq=1479 receive_seq=1479 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993384 heater_bed: target=0 temp=35.0 pwm=0.000  sysload=0.25 cputime=10.888 memavail=7296536 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.0 pwm=0.000
Stats 788928.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18046 bytes_read=62358 bytes_retransmit=9 bytes_invalid=0 send_seq=1480 receive_seq=1480 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993383 heater_bed: target=0 temp=35.0 pwm=0.000  sysload=0.25 cputime=10.904 memavail=7296536 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.6 pwm=0.000
Stats 788929.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18052 bytes_read=62464 bytes_retransmit=9 bytes_invalid=0 send_seq=1481 receive_seq=1481 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993432 heater_bed: target=0 temp=34.9 pwm=0.000  sysload=0.25 cputime=10.929 memavail=7297044 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.2 pwm=0.000
Stats 788931.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18058 bytes_read=62585 bytes_retransmit=9 bytes_invalid=0 send_seq=1482 receive_seq=1482 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993425 heater_bed: target=0 temp=34.9 pwm=0.000  sysload=0.25 cputime=10.950 memavail=7297044 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.9 pwm=0.000
Stats 788932.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18064 bytes_read=62706 bytes_retransmit=9 bytes_invalid=0 send_seq=1483 receive_seq=1483 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993420 heater_bed: target=0 temp=34.9 pwm=0.000  sysload=0.23 cputime=10.969 memavail=7297044 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.4 pwm=0.000
Stats 788933.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18070 bytes_read=62821 bytes_retransmit=9 bytes_invalid=0 send_seq=1484 receive_seq=1484 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993415 heater_bed: target=0 temp=34.9 pwm=0.000  sysload=0.23 cputime=10.983 memavail=7297044 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.1 pwm=0.000
Stats 788934.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18076 bytes_read=62934 bytes_retransmit=9 bytes_invalid=0 send_seq=1485 receive_seq=1485 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993408 heater_bed: target=0 temp=34.8 pwm=0.000  sysload=0.23 cputime=10.999 memavail=7297044 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.8 pwm=0.000
Stats 788935.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18082 bytes_read=63051 bytes_retransmit=9 bytes_invalid=0 send_seq=1486 receive_seq=1486 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993402 heater_bed: target=0 temp=34.8 pwm=0.000  sysload=0.23 cputime=11.018 memavail=7297044 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.3 pwm=0.000
Stats 788936.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18088 bytes_read=63157 bytes_retransmit=9 bytes_invalid=0 send_seq=1487 receive_seq=1487 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993396 heater_bed: target=0 temp=34.8 pwm=0.000  sysload=0.23 cputime=11.036 memavail=7297044 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.0 pwm=0.000
Stats 788937.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18094 bytes_read=63278 bytes_retransmit=9 bytes_invalid=0 send_seq=1488 receive_seq=1488 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993392 heater_bed: target=0 temp=34.8 pwm=0.000  sysload=0.21 cputime=11.053 memavail=7297044 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.7 pwm=0.000
Stats 788938.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18100 bytes_read=63399 bytes_retransmit=9 bytes_invalid=0 send_seq=1489 receive_seq=1489 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993389 heater_bed: target=0 temp=34.7 pwm=0.000  sysload=0.21 cputime=11.068 memavail=7297044 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.3 pwm=0.000
Stats 788939.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18106 bytes_read=63519 bytes_retransmit=9 bytes_invalid=0 send_seq=1490 receive_seq=1490 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993444 heater_bed: target=0 temp=34.7 pwm=0.000  sysload=0.21 cputime=11.086 memavail=7297044 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.9 pwm=0.000
Stats 788940.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18112 bytes_read=63640 bytes_retransmit=9 bytes_invalid=0 send_seq=1491 receive_seq=1491 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993436 heater_bed: target=0 temp=34.6 pwm=0.000  sysload=0.21 cputime=11.106 memavail=7296824 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.6 pwm=0.000
Stats 788941.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18124 bytes_read=63777 bytes_retransmit=9 bytes_invalid=0 send_seq=1493 receive_seq=1493 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993424 heater_bed: target=0 temp=34.6 pwm=0.000  sysload=0.21 cputime=11.126 memavail=7296824 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.1 pwm=0.000
Stats 788942.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18130 bytes_read=63883 bytes_retransmit=9 bytes_invalid=0 send_seq=1494 receive_seq=1494 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993419 heater_bed: target=0 temp=34.6 pwm=0.000  sysload=0.19 cputime=11.141 memavail=7296824 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.9 pwm=0.000
Stats 788943.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18136 bytes_read=64004 bytes_retransmit=9 bytes_invalid=0 send_seq=1495 receive_seq=1495 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993412 heater_bed: target=0 temp=34.6 pwm=0.000  sysload=0.19 cputime=11.154 memavail=7296824 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.5 pwm=0.000
Stats 788944.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18142 bytes_read=64139 bytes_retransmit=9 bytes_invalid=0 send_seq=1496 receive_seq=1496 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993407 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.19 cputime=11.171 memavail=7296748 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.1 pwm=0.000
Stats 788945.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18148 bytes_read=64245 bytes_retransmit=9 bytes_invalid=0 send_seq=1497 receive_seq=1497 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993402 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.19 cputime=11.187 memavail=7296852 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.8 pwm=0.000
Stats 788946.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18154 bytes_read=64366 bytes_retransmit=9 bytes_invalid=0 send_seq=1498 receive_seq=1498 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993407 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.19 cputime=11.203 memavail=7296852 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.5 pwm=0.000
Stats 788947.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18160 bytes_read=64487 bytes_retransmit=9 bytes_invalid=0 send_seq=1499 receive_seq=1499 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993415 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.18 cputime=11.218 memavail=7296852 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.1 pwm=0.000
Stats 788948.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18166 bytes_read=64593 bytes_retransmit=9 bytes_invalid=0 send_seq=1500 receive_seq=1500 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993409 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.18 cputime=11.230 memavail=7296852 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.7 pwm=0.000
Stats 788949.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18172 bytes_read=64728 bytes_retransmit=9 bytes_invalid=0 send_seq=1501 receive_seq=1501 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993414 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.18 cputime=11.243 memavail=7296852 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.4 pwm=0.000
Stats 788950.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18178 bytes_read=64849 bytes_retransmit=9 bytes_invalid=0 send_seq=1502 receive_seq=1502 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993410 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.18 cputime=11.260 memavail=7296356 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.0 pwm=0.000
Stats 788951.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18184 bytes_read=64955 bytes_retransmit=9 bytes_invalid=0 send_seq=1503 receive_seq=1503 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993406 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.18 cputime=11.274 memavail=7296356 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.7 pwm=0.000
Stats 788952.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18190 bytes_read=65076 bytes_retransmit=9 bytes_invalid=0 send_seq=1504 receive_seq=1504 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993400 heater_bed: target=0 temp=34.3 pwm=0.000  sysload=0.16 cputime=11.290 memavail=7296356 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.4 pwm=0.000
Stats 788953.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18196 bytes_read=65197 bytes_retransmit=9 bytes_invalid=0 send_seq=1505 receive_seq=1505 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993395 heater_bed: target=0 temp=34.3 pwm=0.000  sysload=0.16 cputime=11.305 memavail=7296356 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.0 pwm=0.000
Stats 788954.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18202 bytes_read=65317 bytes_retransmit=9 bytes_invalid=0 send_seq=1506 receive_seq=1506 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993390 heater_bed: target=0 temp=34.2 pwm=0.000  sysload=0.16 cputime=11.323 memavail=7296356 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.7 pwm=0.000
Stats 788955.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18208 bytes_read=65438 bytes_retransmit=9 bytes_invalid=0 send_seq=1507 receive_seq=1507 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993387 heater_bed: target=0 temp=34.1 pwm=0.000  sysload=0.16 cputime=11.339 memavail=7296356 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.4 pwm=0.000
Stats 788956.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18214 bytes_read=65559 bytes_retransmit=9 bytes_invalid=0 send_seq=1508 receive_seq=1508 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993431 heater_bed: target=0 temp=34.1 pwm=0.000  sysload=0.16 cputime=11.361 memavail=7296132 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.0 pwm=0.000
Stats 788957.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18220 bytes_read=65665 bytes_retransmit=9 bytes_invalid=0 send_seq=1509 receive_seq=1509 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993431 heater_bed: target=0 temp=34.1 pwm=0.000  sysload=0.15 cputime=11.376 memavail=7295908 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.7 pwm=0.000
Stats 788958.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18226 bytes_read=65786 bytes_retransmit=9 bytes_invalid=0 send_seq=1510 receive_seq=1510 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993431 heater_bed: target=0 temp=34.1 pwm=0.000  sysload=0.15 cputime=11.397 memavail=7295908 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.4 pwm=0.000
Stats 788959.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18232 bytes_read=65921 bytes_retransmit=9 bytes_invalid=0 send_seq=1511 receive_seq=1511 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993427 heater_bed: target=0 temp=34.1 pwm=0.000  sysload=0.15 cputime=11.417 memavail=7295908 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.0 pwm=0.000
Stats 788960.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18238 bytes_read=66027 bytes_retransmit=9 bytes_invalid=0 send_seq=1512 receive_seq=1512 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993422 heater_bed: target=0 temp=34.0 pwm=0.000  sysload=0.15 cputime=11.433 memavail=7295660 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.7 pwm=0.000
Stats 788961.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18244 bytes_read=66148 bytes_retransmit=9 bytes_invalid=0 send_seq=1513 receive_seq=1513 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993415 heater_bed: target=0 temp=34.0 pwm=0.000  sysload=0.15 cputime=11.449 memavail=7295660 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.4 pwm=0.000
Stats 788962.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18250 bytes_read=66269 bytes_retransmit=9 bytes_invalid=0 send_seq=1514 receive_seq=1514 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993407 heater_bed: target=0 temp=34.0 pwm=0.000  sysload=0.14 cputime=11.466 memavail=7295660 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.0 pwm=0.000
Stats 788963.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18256 bytes_read=66375 bytes_retransmit=9 bytes_invalid=0 send_seq=1515 receive_seq=1515 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993401 heater_bed: target=0 temp=34.0 pwm=0.000  sysload=0.14 cputime=11.484 memavail=7295660 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.8 pwm=0.000
Stats 788964.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18262 bytes_read=66525 bytes_retransmit=9 bytes_invalid=0 send_seq=1516 receive_seq=1516 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993395 heater_bed: target=0 temp=33.9 pwm=0.000  sysload=0.14 cputime=11.506 memavail=7295660 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.4 pwm=0.000
Stats 788965.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18268 bytes_read=66631 bytes_retransmit=9 bytes_invalid=0 send_seq=1517 receive_seq=1517 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993438 heater_bed: target=0 temp=33.9 pwm=0.000  sysload=0.14 cputime=11.525 memavail=7295660 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.1 pwm=0.000
Stats 788966.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18274 bytes_read=66737 bytes_retransmit=9 bytes_invalid=0 send_seq=1518 receive_seq=1518 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993430 heater_bed: target=0 temp=33.8 pwm=0.000  sysload=0.14 cputime=11.539 memavail=7295660 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.8 pwm=0.000
Stats 788967.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18280 bytes_read=66873 bytes_retransmit=9 bytes_invalid=0 send_seq=1519 receive_seq=1519 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993423 heater_bed: target=0 temp=33.8 pwm=0.000  sysload=0.29 cputime=11.556 memavail=7295660 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.4 pwm=0.000
Stats 788968.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18286 bytes_read=66979 bytes_retransmit=9 bytes_invalid=0 send_seq=1520 receive_seq=1520 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993428 heater_bed: target=0 temp=33.8 pwm=0.000  sysload=0.29 cputime=11.574 memavail=7295660 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.1 pwm=0.000
Stats 788969.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18292 bytes_read=67092 bytes_retransmit=9 bytes_invalid=0 send_seq=1521 receive_seq=1521 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993463 heater_bed: target=0 temp=33.7 pwm=0.000  sysload=0.29 cputime=11.590 memavail=7295660 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.8 pwm=0.000
Stats 788970.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18298 bytes_read=67219 bytes_retransmit=9 bytes_invalid=0 send_seq=1522 receive_seq=1522 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993460 heater_bed: target=0 temp=33.8 pwm=0.000  sysload=0.29 cputime=11.606 memavail=7295160 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.5 pwm=0.000
Stats 788971.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18304 bytes_read=67325 bytes_retransmit=9 bytes_invalid=0 send_seq=1523 receive_seq=1523 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993451 heater_bed: target=0 temp=33.7 pwm=0.000  sysload=0.29 cputime=11.625 memavail=7295160 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.2 pwm=0.000
Stats 788972.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18310 bytes_read=67431 bytes_retransmit=9 bytes_invalid=0 send_seq=1524 receive_seq=1524 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993448 heater_bed: target=0 temp=33.7 pwm=0.000  sysload=0.34 cputime=11.640 memavail=7295416 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.9 pwm=0.000
Stats 788973.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18316 bytes_read=67567 bytes_retransmit=9 bytes_invalid=0 send_seq=1525 receive_seq=1525 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993440 heater_bed: target=0 temp=33.6 pwm=0.000  sysload=0.34 cputime=11.655 memavail=7295416 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.5 pwm=0.000
Stats 788974.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18322 bytes_read=67687 bytes_retransmit=9 bytes_invalid=0 send_seq=1526 receive_seq=1526 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993468 heater_bed: target=0 temp=33.6 pwm=0.000  sysload=0.34 cputime=11.674 memavail=7295192 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.3 pwm=0.000
Stats 788975.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18328 bytes_read=67793 bytes_retransmit=9 bytes_invalid=0 send_seq=1527 receive_seq=1527 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993456 heater_bed: target=0 temp=33.6 pwm=0.000  sysload=0.34 cputime=11.698 memavail=7295192 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.0 pwm=0.000
Stats 788976.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18334 bytes_read=67929 bytes_retransmit=9 bytes_invalid=0 send_seq=1528 receive_seq=1528 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993448 heater_bed: target=0 temp=33.6 pwm=0.000  sysload=0.34 cputime=11.723 memavail=7295192 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.6 pwm=0.000
Stats 788977.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18340 bytes_read=68035 bytes_retransmit=9 bytes_invalid=0 send_seq=1529 receive_seq=1529 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993440 heater_bed: target=0 temp=33.6 pwm=0.000  sysload=0.40 cputime=11.744 memavail=7295192 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.3 pwm=0.000
Stats 788978.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18346 bytes_read=68141 bytes_retransmit=9 bytes_invalid=0 send_seq=1530 receive_seq=1530 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993473 heater_bed: target=0 temp=33.6 pwm=0.000  sysload=0.40 cputime=11.772 memavail=7295192 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.1 pwm=0.000
Stats 788979.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18352 bytes_read=68291 bytes_retransmit=9 bytes_invalid=0 send_seq=1531 receive_seq=1531 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993460 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=0.40 cputime=11.800 memavail=7295448 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.7 pwm=0.000
Stats 788980.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18358 bytes_read=68397 bytes_retransmit=9 bytes_invalid=0 send_seq=1532 receive_seq=1532 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993448 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=0.40 cputime=11.822 memavail=7295728 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.4 pwm=0.000
Stats 788981.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18364 bytes_read=68503 bytes_retransmit=9 bytes_invalid=0 send_seq=1533 receive_seq=1533 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993438 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=0.40 cputime=11.840 memavail=7295728 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.2 pwm=0.000
Stats 788982.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18370 bytes_read=68639 bytes_retransmit=9 bytes_invalid=0 send_seq=1534 receive_seq=1534 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993430 heater_bed: target=0 temp=33.4 pwm=0.000  sysload=0.36 cputime=11.857 memavail=7295728 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.8 pwm=0.000
Stats 788983.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18376 bytes_read=68745 bytes_retransmit=9 bytes_invalid=0 send_seq=1535 receive_seq=1535 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993422 heater_bed: target=0 temp=33.4 pwm=0.000  sysload=0.36 cputime=11.879 memavail=7295728 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.5 pwm=0.000
Stats 788984.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18382 bytes_read=68880 bytes_retransmit=9 bytes_invalid=0 send_seq=1536 receive_seq=1536 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993414 heater_bed: target=0 temp=33.4 pwm=0.000  sysload=0.36 cputime=11.897 memavail=7295728 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.3 pwm=0.000
Stats 788985.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18388 bytes_read=69001 bytes_retransmit=9 bytes_invalid=0 send_seq=1537 receive_seq=1537 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993408 heater_bed: target=0 temp=33.4 pwm=0.000  sysload=0.36 cputime=11.913 memavail=7295728 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.9 pwm=0.000
Stats 788986.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18394 bytes_read=69107 bytes_retransmit=9 bytes_invalid=0 send_seq=1538 receive_seq=1538 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993402 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=0.36 cputime=11.925 memavail=7295728 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.6 pwm=0.000
Stats 788987.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18400 bytes_read=69228 bytes_retransmit=9 bytes_invalid=0 send_seq=1539 receive_seq=1539 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993426 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=0.33 cputime=11.940 memavail=7295728 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.4 pwm=0.000
Stats 788988.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18406 bytes_read=69349 bytes_retransmit=9 bytes_invalid=0 send_seq=1540 receive_seq=1540 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993418 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=0.33 cputime=11.958 memavail=7295728 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.0 pwm=0.000
Stats 788989.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18412 bytes_read=69469 bytes_retransmit=9 bytes_invalid=0 send_seq=1541 receive_seq=1541 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993410 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=0.33 cputime=11.973 memavail=7295984 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.8 pwm=0.000
Stats 788990.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18418 bytes_read=69590 bytes_retransmit=9 bytes_invalid=0 send_seq=1542 receive_seq=1542 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993404 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=0.33 cputime=11.986 memavail=7295480 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.5 pwm=0.000
Stats 788991.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18424 bytes_read=69711 bytes_retransmit=9 bytes_invalid=0 send_seq=1543 receive_seq=1543 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993399 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=0.33 cputime=11.999 memavail=7295256 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.2 pwm=0.000
Stats 788992.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18430 bytes_read=69817 bytes_retransmit=9 bytes_invalid=0 send_seq=1544 receive_seq=1544 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993393 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=0.31 cputime=12.014 memavail=7295256 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.9 pwm=0.000
Stats 788993.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18436 bytes_read=69938 bytes_retransmit=9 bytes_invalid=0 send_seq=1545 receive_seq=1545 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993387 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=0.31 cputime=12.032 memavail=7295256 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.7 pwm=0.000
Stats 788994.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18442 bytes_read=70073 bytes_retransmit=9 bytes_invalid=0 send_seq=1546 receive_seq=1546 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993380 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=0.31 cputime=12.049 memavail=7295256 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.3 pwm=0.000
Stats 788995.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18448 bytes_read=70179 bytes_retransmit=9 bytes_invalid=0 send_seq=1547 receive_seq=1547 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993377 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=0.31 cputime=12.062 memavail=7295256 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.1 pwm=0.000
Stats 788996.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18454 bytes_read=70300 bytes_retransmit=9 bytes_invalid=0 send_seq=1548 receive_seq=1548 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993403 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=0.31 cputime=12.077 memavail=7295256 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.8 pwm=0.000
Stats 788997.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18460 bytes_read=70421 bytes_retransmit=9 bytes_invalid=0 send_seq=1549 receive_seq=1549 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993396 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=0.28 cputime=12.095 memavail=7295256 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.5 pwm=0.000
Stats 788998.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18466 bytes_read=70527 bytes_retransmit=9 bytes_invalid=0 send_seq=1550 receive_seq=1550 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993391 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.28 cputime=12.112 memavail=7295256 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.2 pwm=0.000
Stats 788999.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18472 bytes_read=70662 bytes_retransmit=9 bytes_invalid=0 send_seq=1551 receive_seq=1551 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993397 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.28 cputime=12.128 memavail=7295268 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.0 pwm=0.000
Stats 789000.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18478 bytes_read=70783 bytes_retransmit=9 bytes_invalid=0 send_seq=1552 receive_seq=1552 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993392 heater_bed: target=0 temp=32.9 pwm=0.000  sysload=0.28 cputime=12.141 memavail=7295268 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.6 pwm=0.000
Stats 789001.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18484 bytes_read=70889 bytes_retransmit=9 bytes_invalid=0 send_seq=1553 receive_seq=1553 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993387 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.28 cputime=12.158 memavail=7295268 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.4 pwm=0.000
Stats 789002.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18498 bytes_read=71025 bytes_retransmit=9 bytes_invalid=0 send_seq=1555 receive_seq=1555 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993381 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.34 cputime=12.183 memavail=7295268 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.2 pwm=0.000
Stats 789003.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18510 bytes_read=71162 bytes_retransmit=9 bytes_invalid=0 send_seq=1557 receive_seq=1557 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993372 heater_bed: target=0 temp=32.9 pwm=0.000  sysload=0.34 cputime=12.203 memavail=7295268 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.8 pwm=0.000
Stats 789004.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18516 bytes_read=71280 bytes_retransmit=9 bytes_invalid=0 send_seq=1558 receive_seq=1558 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993424 heater_bed: target=0 temp=32.9 pwm=0.000  sysload=0.34 cputime=12.222 memavail=7295268 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.6 pwm=0.000
Stats 789005.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18522 bytes_read=71393 bytes_retransmit=9 bytes_invalid=0 send_seq=1559 receive_seq=1559 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993418 heater_bed: target=0 temp=32.8 pwm=0.000  sysload=0.34 cputime=12.237 memavail=7295268 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.3 pwm=0.000
Stats 789006.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18528 bytes_read=71507 bytes_retransmit=9 bytes_invalid=0 send_seq=1560 receive_seq=1560 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993410 heater_bed: target=0 temp=32.9 pwm=0.000  sysload=0.34 cputime=12.258 memavail=7295268 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.0 pwm=0.000
Stats 789007.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18542 bytes_read=71628 bytes_retransmit=9 bytes_invalid=0 send_seq=1562 receive_seq=1562 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993414 heater_bed: target=0 temp=32.8 pwm=0.000  sysload=0.31 cputime=12.276 memavail=7295268 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.8 pwm=0.000
Stats 789008.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18548 bytes_read=71749 bytes_retransmit=9 bytes_invalid=0 send_seq=1563 receive_seq=1563 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993409 heater_bed: target=0 temp=32.8 pwm=0.000  sysload=0.31 cputime=12.294 memavail=7295268 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.5 pwm=0.000
Stats 789009.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18554 bytes_read=71870 bytes_retransmit=9 bytes_invalid=0 send_seq=1564 receive_seq=1564 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993404 heater_bed: target=0 temp=32.8 pwm=0.000  sysload=0.31 cputime=12.308 memavail=7295268 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.2 pwm=0.000
Stats 789010.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18560 bytes_read=71990 bytes_retransmit=9 bytes_invalid=0 send_seq=1565 receive_seq=1565 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993397 heater_bed: target=0 temp=32.8 pwm=0.000  sysload=0.31 cputime=12.323 memavail=7295024 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.0 pwm=0.000
Stats 789011.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18566 bytes_read=72111 bytes_retransmit=9 bytes_invalid=0 send_seq=1566 receive_seq=1566 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993395 heater_bed: target=0 temp=32.6 pwm=0.000  sysload=0.31 cputime=12.346 memavail=7295024 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.7 pwm=0.000
Stats 789012.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18572 bytes_read=72232 bytes_retransmit=9 bytes_invalid=0 send_seq=1567 receive_seq=1567 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993390 heater_bed: target=0 temp=32.7 pwm=0.000  sysload=0.29 cputime=12.362 memavail=7295024 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.4 pwm=0.000
Stats 789013.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18578 bytes_read=72338 bytes_retransmit=9 bytes_invalid=0 send_seq=1568 receive_seq=1568 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993444 heater_bed: target=0 temp=32.6 pwm=0.000  sysload=0.29 cputime=12.378 memavail=7295024 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.2 pwm=0.000
Stats 789014.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18584 bytes_read=72459 bytes_retransmit=9 bytes_invalid=0 send_seq=1569 receive_seq=1569 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993438 heater_bed: target=0 temp=32.7 pwm=0.000  sysload=0.29 cputime=12.394 memavail=7290584 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.9 pwm=0.000
Stats 789015.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18590 bytes_read=72594 bytes_retransmit=9 bytes_invalid=0 send_seq=1570 receive_seq=1570 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993434 heater_bed: target=0 temp=32.6 pwm=0.000  sysload=0.29 cputime=12.414 memavail=7296224 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.6 pwm=0.000
Stats 789016.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18596 bytes_read=72700 bytes_retransmit=9 bytes_invalid=0 send_seq=1571 receive_seq=1571 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993422 heater_bed: target=0 temp=32.6 pwm=0.000  sysload=0.29 cputime=12.425 memavail=7295776 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.4 pwm=0.000
Stats 789017.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18602 bytes_read=72821 bytes_retransmit=9 bytes_invalid=0 send_seq=1572 receive_seq=1572 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993412 heater_bed: target=0 temp=32.6 pwm=0.000  sysload=0.26 cputime=12.452 memavail=7295776 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.2 pwm=0.000
Stats 789018.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18608 bytes_read=72942 bytes_retransmit=9 bytes_invalid=0 send_seq=1573 receive_seq=1573 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993457 heater_bed: target=0 temp=32.5 pwm=0.000  sysload=0.26 cputime=12.478 memavail=7295776 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.9 pwm=0.000
Stats 789019.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18614 bytes_read=73062 bytes_retransmit=9 bytes_invalid=0 send_seq=1574 receive_seq=1574 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993448 heater_bed: target=0 temp=32.4 pwm=0.000  sysload=0.26 cputime=12.494 memavail=7295776 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.6 pwm=0.000
Stats 789020.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18620 bytes_read=73183 bytes_retransmit=9 bytes_invalid=0 send_seq=1575 receive_seq=1575 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993439 heater_bed: target=0 temp=32.5 pwm=0.000  sysload=0.26 cputime=12.512 memavail=7295276 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.4 pwm=0.000
Stats 789021.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18626 bytes_read=73304 bytes_retransmit=9 bytes_invalid=0 send_seq=1576 receive_seq=1576 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993431 heater_bed: target=0 temp=32.4 pwm=0.000  sysload=0.26 cputime=12.528 memavail=7295052 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.1 pwm=0.000
Stats 789022.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18632 bytes_read=73410 bytes_retransmit=9 bytes_invalid=0 send_seq=1577 receive_seq=1577 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993423 heater_bed: target=0 temp=32.4 pwm=0.000  sysload=0.24 cputime=12.549 memavail=7295052 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.8 pwm=0.000
Stats 789023.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18638 bytes_read=73531 bytes_retransmit=9 bytes_invalid=0 send_seq=1578 receive_seq=1578 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993416 heater_bed: target=0 temp=32.4 pwm=0.000  sysload=0.24 cputime=12.568 memavail=7295052 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.6 pwm=0.000
Stats 789024.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18644 bytes_read=73652 bytes_retransmit=9 bytes_invalid=0 send_seq=1579 receive_seq=1579 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993409 heater_bed: target=0 temp=32.4 pwm=0.000  sysload=0.24 cputime=12.581 memavail=7295052 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.3 pwm=0.000
Stats 789025.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18650 bytes_read=73772 bytes_retransmit=9 bytes_invalid=0 send_seq=1580 receive_seq=1580 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993404 heater_bed: target=0 temp=32.3 pwm=0.000  sysload=0.24 cputime=12.594 memavail=7295052 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.1 pwm=0.000
Stats 789026.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18656 bytes_read=73893 bytes_retransmit=9 bytes_invalid=0 send_seq=1581 receive_seq=1581 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993432 heater_bed: target=0 temp=32.3 pwm=0.000  sysload=0.24 cputime=12.610 memavail=7295052 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.9 pwm=0.000
Stats 789027.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18662 bytes_read=74014 bytes_retransmit=9 bytes_invalid=0 send_seq=1582 receive_seq=1582 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993424 heater_bed: target=0 temp=32.3 pwm=0.000  sysload=0.22 cputime=12.628 memavail=7295052 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.6 pwm=0.000
Stats 789028.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18668 bytes_read=74120 bytes_retransmit=9 bytes_invalid=0 send_seq=1583 receive_seq=1583 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993414 heater_bed: target=0 temp=32.3 pwm=0.000  sysload=0.22 cputime=12.647 memavail=7295052 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.4 pwm=0.000
Stats 789029.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18674 bytes_read=74241 bytes_retransmit=9 bytes_invalid=0 send_seq=1584 receive_seq=1584 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993406 heater_bed: target=0 temp=32.2 pwm=0.000  sysload=0.22 cputime=12.662 memavail=7295052 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.1 pwm=0.000
Stats 789030.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18680 bytes_read=74376 bytes_retransmit=9 bytes_invalid=0 send_seq=1585 receive_seq=1585 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993404 heater_bed: target=0 temp=32.2 pwm=0.000  sysload=0.22 cputime=12.675 memavail=7295056 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.8 pwm=0.000
Stats 789031.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18686 bytes_read=74482 bytes_retransmit=9 bytes_invalid=0 send_seq=1586 receive_seq=1586 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993406 heater_bed: target=0 temp=32.2 pwm=0.000  sysload=0.22 cputime=12.693 memavail=7297080 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.6 pwm=0.000
Stats 789032.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18692 bytes_read=74603 bytes_retransmit=9 bytes_invalid=0 send_seq=1587 receive_seq=1587 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993396 heater_bed: target=0 temp=32.2 pwm=0.000  sysload=0.21 cputime=12.729 memavail=7296828 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.4 pwm=0.000
Stats 789033.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18698 bytes_read=74724 bytes_retransmit=9 bytes_invalid=0 send_seq=1588 receive_seq=1588 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993386 heater_bed: target=0 temp=32.1 pwm=0.000  sysload=0.21 cputime=12.764 memavail=7298456 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.1 pwm=0.000
Stats 789034.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18704 bytes_read=74830 bytes_retransmit=9 bytes_invalid=0 send_seq=1589 receive_seq=1589 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993376 heater_bed: target=0 temp=32.2 pwm=0.000  sysload=0.21 cputime=12.796 memavail=7299852 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.9 pwm=0.000
Stats 789035.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18710 bytes_read=74965 bytes_retransmit=9 bytes_invalid=0 send_seq=1590 receive_seq=1590 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993401 heater_bed: target=0 temp=32.1 pwm=0.000  sysload=0.21 cputime=12.833 memavail=7299600 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.7 pwm=0.000
Stats 789036.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18716 bytes_read=75086 bytes_retransmit=9 bytes_invalid=0 send_seq=1591 receive_seq=1591 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993390 heater_bed: target=0 temp=32.1 pwm=0.000  sysload=0.21 cputime=12.854 memavail=7299600 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.4 pwm=0.000
Stats 789037.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18722 bytes_read=75192 bytes_retransmit=9 bytes_invalid=0 send_seq=1592 receive_seq=1592 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993384 heater_bed: target=0 temp=32.1 pwm=0.000  sysload=0.19 cputime=12.878 memavail=7299600 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.2 pwm=0.000
Stats 789038.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18728 bytes_read=75313 bytes_retransmit=9 bytes_invalid=0 send_seq=1593 receive_seq=1593 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993379 heater_bed: target=0 temp=32.1 pwm=0.000  sysload=0.19 cputime=12.903 memavail=7299600 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.0 pwm=0.000
Stats 789039.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18734 bytes_read=75434 bytes_retransmit=9 bytes_invalid=0 send_seq=1594 receive_seq=1594 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993379 heater_bed: target=0 temp=32.0 pwm=0.000  sysload=0.19 cputime=12.929 memavail=7299348 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.7 pwm=0.000
Stats 789040.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18740 bytes_read=75551 bytes_retransmit=9 bytes_invalid=0 send_seq=1595 receive_seq=1595 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993372 heater_bed: target=0 temp=32.1 pwm=0.000  sysload=0.19 cputime=12.948 memavail=7299100 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.5 pwm=0.000
Stats 789041.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18746 bytes_read=75663 bytes_retransmit=9 bytes_invalid=0 send_seq=1596 receive_seq=1596 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993367 heater_bed: target=0 temp=32.0 pwm=0.000  sysload=0.19 cputime=12.964 memavail=7298876 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.2 pwm=0.000
Stats 789042.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18752 bytes_read=75778 bytes_retransmit=9 bytes_invalid=0 send_seq=1597 receive_seq=1597 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993370 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.25 cputime=12.982 memavail=7298876 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.0 pwm=0.000
Stats 789043.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18758 bytes_read=75884 bytes_retransmit=9 bytes_invalid=0 send_seq=1598 receive_seq=1598 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993366 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.25 cputime=12.997 memavail=7298876 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.7 pwm=0.000
Stats 789044.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18764 bytes_read=76005 bytes_retransmit=9 bytes_invalid=0 send_seq=1599 receive_seq=1599 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993409 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.25 cputime=13.020 memavail=7298624 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.6 pwm=0.000
Stats 789045.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18770 bytes_read=76140 bytes_retransmit=9 bytes_invalid=0 send_seq=1600 receive_seq=1600 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993401 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.25 cputime=13.043 memavail=7298624 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.2 pwm=0.000
Stats 789046.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18776 bytes_read=76246 bytes_retransmit=9 bytes_invalid=0 send_seq=1601 receive_seq=1601 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993394 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.25 cputime=13.057 memavail=7298624 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.0 pwm=0.000
Stats 789047.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18782 bytes_read=76367 bytes_retransmit=9 bytes_invalid=0 send_seq=1602 receive_seq=1602 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993389 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.23 cputime=13.074 memavail=7298624 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.9 pwm=0.000
Stats 789048.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18788 bytes_read=76488 bytes_retransmit=9 bytes_invalid=0 send_seq=1603 receive_seq=1603 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993384 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.23 cputime=13.097 memavail=7298628 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.6 pwm=0.000
Stats 789049.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18794 bytes_read=76594 bytes_retransmit=9 bytes_invalid=0 send_seq=1604 receive_seq=1604 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993378 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.23 cputime=13.115 memavail=7298628 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.4 pwm=0.000
Stats 789050.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18800 bytes_read=76729 bytes_retransmit=9 bytes_invalid=0 send_seq=1605 receive_seq=1605 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993373 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.23 cputime=13.133 memavail=7297648 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.2 pwm=0.000
Stats 789051.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18806 bytes_read=76850 bytes_retransmit=9 bytes_invalid=0 send_seq=1606 receive_seq=1606 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993371 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.23 cputime=13.154 memavail=7297648 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.9 pwm=0.000
Stats 789052.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18812 bytes_read=76956 bytes_retransmit=9 bytes_invalid=0 send_seq=1607 receive_seq=1607 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993368 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.21 cputime=13.174 memavail=7297796 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.7 pwm=0.000
Stats 789053.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18818 bytes_read=77077 bytes_retransmit=9 bytes_invalid=0 send_seq=1608 receive_seq=1608 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993405 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.21 cputime=13.197 memavail=7297900 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.5 pwm=0.000
Stats 789054.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18824 bytes_read=77198 bytes_retransmit=9 bytes_invalid=0 send_seq=1609 receive_seq=1609 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993398 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.21 cputime=13.215 memavail=7297648 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.2 pwm=0.000
Stats 789055.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18830 bytes_read=77318 bytes_retransmit=9 bytes_invalid=0 send_seq=1610 receive_seq=1610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993392 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.21 cputime=13.230 memavail=7297648 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.0 pwm=0.000
Stats 789056.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18836 bytes_read=77439 bytes_retransmit=9 bytes_invalid=0 send_seq=1611 receive_seq=1611 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993386 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.21 cputime=13.250 memavail=7297648 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.8 pwm=0.000
Stats 789057.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18842 bytes_read=77560 bytes_retransmit=9 bytes_invalid=0 send_seq=1612 receive_seq=1612 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993408 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.20 cputime=13.272 memavail=7297648 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.5 pwm=0.000
Stats 789058.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18848 bytes_read=77666 bytes_retransmit=9 bytes_invalid=0 send_seq=1613 receive_seq=1613 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993401 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.20 cputime=13.287 memavail=7297652 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.4 pwm=0.000
Stats 789059.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18854 bytes_read=77787 bytes_retransmit=9 bytes_invalid=0 send_seq=1614 receive_seq=1614 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993393 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.20 cputime=13.303 memavail=7297652 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.1 pwm=0.000
Stats 789060.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18860 bytes_read=77922 bytes_retransmit=9 bytes_invalid=0 send_seq=1615 receive_seq=1615 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993388 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.20 cputime=13.320 memavail=7297800 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.9 pwm=0.000
Stats 789061.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18866 bytes_read=78028 bytes_retransmit=9 bytes_invalid=0 send_seq=1616 receive_seq=1616 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993384 heater_bed: target=0 temp=31.5 pwm=0.000  sysload=0.20 cputime=13.338 memavail=7297904 print_time=312.471 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.7 pwm=0.000
Heater extruder approaching new target of 240.000
Heater heater_bed approaching new target of 80.000
Stats 789062.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18904 bytes_read=78159 bytes_retransmit=9 bytes_invalid=0 send_seq=1619 receive_seq=1619 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993380 heater_bed: target=80 temp=31.5 pwm=1.000  sysload=0.18 cputime=13.365 memavail=7296648 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=77.5 pwm=1.000
Stats 789063.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18910 bytes_read=78280 bytes_retransmit=9 bytes_invalid=0 send_seq=1620 receive_seq=1620 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993375 heater_bed: target=80 temp=31.5 pwm=1.000  sysload=0.18 cputime=13.381 memavail=7296648 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=77.5 pwm=1.000
Stats 789064.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18922 bytes_read=78402 bytes_retransmit=9 bytes_invalid=0 send_seq=1622 receive_seq=1622 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993369 heater_bed: target=80 temp=31.5 pwm=1.000  sysload=0.18 cputime=13.394 memavail=7298412 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=79.2 pwm=1.000
Stats 789065.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18928 bytes_read=78537 bytes_retransmit=9 bytes_invalid=0 send_seq=1623 receive_seq=1623 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993401 heater_bed: target=80 temp=31.5 pwm=1.000  sysload=0.18 cputime=13.411 memavail=7298412 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=82.2 pwm=1.000
Stats 789066.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18945 bytes_read=78658 bytes_retransmit=9 bytes_invalid=0 send_seq=1624 receive_seq=1624 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993396 heater_bed: target=80 temp=31.5 pwm=1.000  sysload=0.18 cputime=13.430 memavail=7298412 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=87.1 pwm=1.000
Stats 789067.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18967 bytes_read=78769 bytes_retransmit=9 bytes_invalid=0 send_seq=1626 receive_seq=1626 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993390 heater_bed: target=80 temp=31.5 pwm=1.000  sysload=0.17 cputime=13.445 memavail=7298412 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=90.9 pwm=1.000
Stats 789068.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18973 bytes_read=78890 bytes_retransmit=9 bytes_invalid=0 send_seq=1627 receive_seq=1627 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993384 heater_bed: target=80 temp=31.6 pwm=1.000  sysload=0.17 cputime=13.459 memavail=7298664 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=94.8 pwm=1.000
Stats 789069.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18979 bytes_read=79011 bytes_retransmit=9 bytes_invalid=0 send_seq=1628 receive_seq=1628 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993381 heater_bed: target=80 temp=31.8 pwm=1.000  sysload=0.17 cputime=13.472 memavail=7297920 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=99.9 pwm=1.000
Stats 789070.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=18985 bytes_read=79131 bytes_retransmit=9 bytes_invalid=0 send_seq=1629 receive_seq=1629 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993381 heater_bed: target=80 temp=31.9 pwm=1.000  sysload=0.17 cputime=13.502 memavail=7294896 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=103.7 pwm=1.000
Stats 789071.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19023 bytes_read=79262 bytes_retransmit=9 bytes_invalid=0 send_seq=1632 receive_seq=1632 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993373 heater_bed: target=80 temp=32.2 pwm=1.000  sysload=0.17 cputime=13.514 memavail=7294896 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=107.3 pwm=1.000
Stats 789072.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19029 bytes_read=79383 bytes_retransmit=9 bytes_invalid=0 send_seq=1633 receive_seq=1633 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993363 heater_bed: target=80 temp=32.5 pwm=1.000  sysload=0.15 cputime=13.531 memavail=7294896 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=112.1 pwm=1.000
Stats 789073.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19035 bytes_read=79489 bytes_retransmit=9 bytes_invalid=0 send_seq=1634 receive_seq=1634 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993354 heater_bed: target=80 temp=32.7 pwm=1.000  sysload=0.15 cputime=13.553 memavail=7296660 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=115.6 pwm=1.000
Stats 789074.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19041 bytes_read=79610 bytes_retransmit=9 bytes_invalid=0 send_seq=1635 receive_seq=1635 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993353 heater_bed: target=80 temp=33.0 pwm=1.000  sysload=0.15 cputime=13.574 memavail=7298692 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=119.0 pwm=1.000
Stats 789075.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19079 bytes_read=79754 bytes_retransmit=9 bytes_invalid=0 send_seq=1638 receive_seq=1638 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993352 heater_bed: target=80 temp=33.2 pwm=1.000  sysload=0.15 cputime=13.595 memavail=7298692 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=123.5 pwm=1.000
Stats 789076.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19085 bytes_read=79851 bytes_retransmit=9 bytes_invalid=0 send_seq=1639 receive_seq=1639 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993350 heater_bed: target=80 temp=33.5 pwm=1.000  sysload=0.15 cputime=13.610 memavail=7298468 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=126.7 pwm=1.000
Stats 789077.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19091 bytes_read=79961 bytes_retransmit=9 bytes_invalid=0 send_seq=1640 receive_seq=1640 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993348 heater_bed: target=80 temp=33.9 pwm=1.000  sysload=0.30 cputime=13.624 memavail=7298244 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=130.0 pwm=1.000
Stats 789078.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19097 bytes_read=80074 bytes_retransmit=9 bytes_invalid=0 send_seq=1641 receive_seq=1641 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993347 heater_bed: target=80 temp=34.2 pwm=1.000  sysload=0.30 cputime=13.638 memavail=7298244 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=134.2 pwm=1.000
Stats 789079.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19130 bytes_read=80182 bytes_retransmit=9 bytes_invalid=0 send_seq=1643 receive_seq=1643 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993346 heater_bed: target=80 temp=34.5 pwm=1.000  sysload=0.30 cputime=13.654 memavail=7297996 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=137.4 pwm=1.000
Stats 789080.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19136 bytes_read=80314 bytes_retransmit=9 bytes_invalid=0 send_seq=1644 receive_seq=1644 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993342 heater_bed: target=80 temp=34.9 pwm=1.000  sysload=0.30 cputime=13.672 memavail=7298004 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=140.5 pwm=1.000
Stats 789081.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19142 bytes_read=80431 bytes_retransmit=9 bytes_invalid=0 send_seq=1645 receive_seq=1645 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993340 heater_bed: target=80 temp=35.2 pwm=1.000  sysload=0.30 cputime=13.685 memavail=7298004 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=144.5 pwm=1.000
Stats 789082.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19148 bytes_read=80534 bytes_retransmit=9 bytes_invalid=0 send_seq=1646 receive_seq=1646 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993340 heater_bed: target=80 temp=35.5 pwm=1.000  sysload=0.36 cputime=13.698 memavail=7298004 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=147.6 pwm=1.000
Stats 789083.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19186 bytes_read=80662 bytes_retransmit=9 bytes_invalid=0 send_seq=1649 receive_seq=1649 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993399 heater_bed: target=80 temp=36.0 pwm=1.000  sysload=0.36 cputime=13.720 memavail=7298004 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=150.6 pwm=1.000
Stats 789084.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19192 bytes_read=80779 bytes_retransmit=9 bytes_invalid=0 send_seq=1650 receive_seq=1650 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993394 heater_bed: target=80 temp=36.2 pwm=1.000  sysload=0.36 cputime=13.737 memavail=7298004 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=154.5 pwm=1.000
Stats 789085.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19198 bytes_read=80896 bytes_retransmit=9 bytes_invalid=0 send_seq=1651 receive_seq=1651 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993389 heater_bed: target=80 temp=36.6 pwm=1.000  sysload=0.36 cputime=13.752 memavail=7298004 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=157.5 pwm=1.000
Stats 789086.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19204 bytes_read=81014 bytes_retransmit=9 bytes_invalid=0 send_seq=1652 receive_seq=1652 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993383 heater_bed: target=80 temp=37.0 pwm=1.000  sysload=0.36 cputime=13.765 memavail=7298004 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=160.4 pwm=1.000
Stats 789087.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19226 bytes_read=81136 bytes_retransmit=9 bytes_invalid=0 send_seq=1654 receive_seq=1654 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993378 heater_bed: target=80 temp=37.3 pwm=1.000  sysload=0.33 cputime=13.783 memavail=7298004 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=164.3 pwm=1.000
Stats 789088.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19248 bytes_read=81244 bytes_retransmit=9 bytes_invalid=0 send_seq=1656 receive_seq=1656 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993375 heater_bed: target=80 temp=37.7 pwm=1.000  sysload=0.33 cputime=13.800 memavail=7298004 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=167.1 pwm=1.000
Stats 789089.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19254 bytes_read=81362 bytes_retransmit=9 bytes_invalid=0 send_seq=1657 receive_seq=1657 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993371 heater_bed: target=80 temp=38.1 pwm=1.000  sysload=0.33 cputime=13.816 memavail=7298004 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=170.0 pwm=1.000
Stats 789090.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19260 bytes_read=81479 bytes_retransmit=9 bytes_invalid=0 send_seq=1658 receive_seq=1658 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993377 heater_bed: target=80 temp=38.3 pwm=1.000  sysload=0.33 cputime=13.835 memavail=7297528 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=173.6 pwm=1.000
Stats 789091.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19266 bytes_read=81596 bytes_retransmit=9 bytes_invalid=0 send_seq=1659 receive_seq=1659 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993374 heater_bed: target=80 temp=38.7 pwm=1.000  sysload=0.33 cputime=13.853 memavail=7297528 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=176.4 pwm=1.000
Stats 789092.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19304 bytes_read=81724 bytes_retransmit=9 bytes_invalid=0 send_seq=1662 receive_seq=1662 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993409 heater_bed: target=80 temp=39.1 pwm=1.000  sysload=0.30 cputime=13.878 memavail=7297528 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=179.2 pwm=1.000
Stats 789093.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19310 bytes_read=81841 bytes_retransmit=9 bytes_invalid=0 send_seq=1663 receive_seq=1663 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993404 heater_bed: target=80 temp=39.4 pwm=1.000  sysload=0.30 cputime=13.898 memavail=7297528 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=182.9 pwm=1.000
Stats 789094.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19316 bytes_read=81944 bytes_retransmit=9 bytes_invalid=0 send_seq=1664 receive_seq=1664 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993397 heater_bed: target=80 temp=39.7 pwm=1.000  sysload=0.30 cputime=13.916 memavail=7297784 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=185.6 pwm=1.000
Stats 789095.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19322 bytes_read=82062 bytes_retransmit=9 bytes_invalid=0 send_seq=1665 receive_seq=1665 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993393 heater_bed: target=80 temp=40.2 pwm=1.000  sysload=0.30 cputime=13.931 memavail=7297544 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=188.2 pwm=1.000
Stats 789096.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19360 bytes_read=82203 bytes_retransmit=9 bytes_invalid=0 send_seq=1668 receive_seq=1668 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993390 heater_bed: target=80 temp=40.5 pwm=1.000  sysload=0.30 cputime=13.953 memavail=7297544 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=191.8 pwm=1.000
Stats 789097.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19366 bytes_read=82306 bytes_retransmit=9 bytes_invalid=0 send_seq=1669 receive_seq=1669 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993385 heater_bed: target=80 temp=40.8 pwm=1.000  sysload=0.28 cputime=13.970 memavail=7297544 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=194.5 pwm=1.000
Stats 789098.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19372 bytes_read=82424 bytes_retransmit=9 bytes_invalid=0 send_seq=1670 receive_seq=1670 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993379 heater_bed: target=80 temp=41.3 pwm=1.000  sysload=0.28 cputime=13.986 memavail=7297544 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=197.0 pwm=1.000
Stats 789099.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19378 bytes_read=82541 bytes_retransmit=9 bytes_invalid=0 send_seq=1671 receive_seq=1671 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993376 heater_bed: target=80 temp=41.5 pwm=1.000  sysload=0.28 cputime=14.002 memavail=7297544 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=200.4 pwm=1.000
Stats 789100.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19416 bytes_read=82654 bytes_retransmit=9 bytes_invalid=0 send_seq=1674 receive_seq=1674 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993373 heater_bed: target=80 temp=41.9 pwm=1.000  sysload=0.28 cputime=14.022 memavail=7297532 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=203.1 pwm=1.000
Stats 789101.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19422 bytes_read=82786 bytes_retransmit=9 bytes_invalid=0 send_seq=1675 receive_seq=1675 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993399 heater_bed: target=80 temp=42.2 pwm=1.000  sysload=0.28 cputime=14.050 memavail=7297556 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=205.5 pwm=1.000
Stats 789102.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19428 bytes_read=82903 bytes_retransmit=9 bytes_invalid=0 send_seq=1676 receive_seq=1676 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993394 heater_bed: target=80 temp=42.6 pwm=1.000  sysload=0.34 cputime=14.074 memavail=7297556 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=209.0 pwm=1.000
Stats 789103.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19434 bytes_read=83006 bytes_retransmit=9 bytes_invalid=0 send_seq=1677 receive_seq=1677 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993390 heater_bed: target=80 temp=42.9 pwm=1.000  sysload=0.34 cputime=14.097 memavail=7297556 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=211.5 pwm=1.000
Stats 789104.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19472 bytes_read=83134 bytes_retransmit=9 bytes_invalid=0 send_seq=1680 receive_seq=1680 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993386 heater_bed: target=80 temp=43.3 pwm=1.000  sysload=0.34 cputime=14.120 memavail=7297556 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=214.8 pwm=1.000
Stats 789105.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19478 bytes_read=83251 bytes_retransmit=9 bytes_invalid=0 send_seq=1681 receive_seq=1681 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993383 heater_bed: target=80 temp=43.6 pwm=1.000  sysload=0.34 cputime=14.147 memavail=7297556 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=217.1 pwm=1.000
Stats 789106.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19484 bytes_read=83368 bytes_retransmit=9 bytes_invalid=0 send_seq=1682 receive_seq=1682 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993379 heater_bed: target=80 temp=43.9 pwm=1.000  sysload=0.34 cputime=14.169 memavail=7297556 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=219.7 pwm=1.000
Stats 789107.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19490 bytes_read=83486 bytes_retransmit=9 bytes_invalid=0 send_seq=1683 receive_seq=1683 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993377 heater_bed: target=80 temp=44.3 pwm=1.000  sysload=0.31 cputime=14.187 memavail=7297556 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=222.9 pwm=1.000
Stats 789108.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19512 bytes_read=83608 bytes_retransmit=9 bytes_invalid=0 send_seq=1685 receive_seq=1685 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993379 heater_bed: target=80 temp=44.6 pwm=1.000  sysload=0.31 cputime=14.205 memavail=7297556 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=225.3 pwm=1.000
Stats 789109.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19534 bytes_read=83716 bytes_retransmit=9 bytes_invalid=0 send_seq=1687 receive_seq=1687 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993376 heater_bed: target=80 temp=44.9 pwm=1.000  sysload=0.31 cputime=14.226 memavail=7297556 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=227.6 pwm=1.000
Stats 789110.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19572 bytes_read=83858 bytes_retransmit=9 bytes_invalid=0 send_seq=1690 receive_seq=1690 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993430 heater_bed: target=80 temp=45.3 pwm=1.000  sysload=0.31 cputime=14.255 memavail=7296072 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=230.7 pwm=0.808
Stats 789111.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19610 bytes_read=83985 bytes_retransmit=9 bytes_invalid=0 send_seq=1693 receive_seq=1693 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993422 heater_bed: target=80 temp=45.6 pwm=1.000  sysload=0.31 cputime=14.275 memavail=7296076 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=232.9 pwm=0.604
Stats 789112.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19659 bytes_read=84092 bytes_retransmit=9 bytes_invalid=0 send_seq=1696 receive_seq=1696 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993414 heater_bed: target=80 temp=45.9 pwm=1.000  sysload=0.28 cputime=14.290 memavail=7296076 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=234.8 pwm=0.559
Heater extruder within range of 240.000
Stats 789113.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19713 bytes_read=84230 bytes_retransmit=9 bytes_invalid=0 send_seq=1700 receive_seq=1700 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993408 heater_bed: target=80 temp=46.3 pwm=1.000  sysload=0.28 cputime=14.308 memavail=7296224 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=237.1 pwm=0.376
Stats 789114.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19735 bytes_read=84336 bytes_retransmit=9 bytes_invalid=0 send_seq=1702 receive_seq=1702 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993404 heater_bed: target=80 temp=46.6 pwm=1.000  sysload=0.28 cputime=14.327 memavail=7296328 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=238.1 pwm=0.446
Stats 789115.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19789 bytes_read=84454 bytes_retransmit=9 bytes_invalid=0 send_seq=1706 receive_seq=1706 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993403 heater_bed: target=80 temp=46.9 pwm=1.000  sysload=0.28 cputime=14.344 memavail=7296328 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=238.8 pwm=0.472
Stats 789116.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19843 bytes_read=84615 bytes_retransmit=9 bytes_invalid=0 send_seq=1710 receive_seq=1710 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993397 heater_bed: target=80 temp=47.3 pwm=1.000  sysload=0.28 cputime=14.362 memavail=7296328 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=239.7 pwm=0.405
Stats 789117.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19897 bytes_read=84733 bytes_retransmit=9 bytes_invalid=0 send_seq=1714 receive_seq=1714 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993393 heater_bed: target=80 temp=47.5 pwm=1.000  sysload=0.26 cputime=14.376 memavail=7296328 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 789118.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19935 bytes_read=84846 bytes_retransmit=9 bytes_invalid=0 send_seq=1717 receive_seq=1717 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993389 heater_bed: target=80 temp=47.9 pwm=1.000  sysload=0.26 cputime=14.391 memavail=7296328 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.9 pwm=0.250
Stats 789119.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19968 bytes_read=84983 bytes_retransmit=9 bytes_invalid=0 send_seq=1719 receive_seq=1719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993437 heater_bed: target=80 temp=48.2 pwm=1.000  sysload=0.26 cputime=14.414 memavail=7296328 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=241.4 pwm=0.286
Stats 789120.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20006 bytes_read=85096 bytes_retransmit=9 bytes_invalid=0 send_seq=1722 receive_seq=1722 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993429 heater_bed: target=80 temp=48.5 pwm=1.000  sysload=0.26 cputime=14.429 memavail=7296476 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=241.8 pwm=0.222
Stats 789121.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20060 bytes_read=85228 bytes_retransmit=9 bytes_invalid=0 send_seq=1726 receive_seq=1726 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993422 heater_bed: target=80 temp=48.8 pwm=1.000  sysload=0.26 cputime=14.445 memavail=7296584 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=242.0 pwm=0.194
Stats 789122.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20114 bytes_read=85375 bytes_retransmit=9 bytes_invalid=0 send_seq=1730 receive_seq=1730 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993417 heater_bed: target=80 temp=49.2 pwm=1.000  sysload=0.24 cputime=14.463 memavail=7296584 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=241.8 pwm=0.315
Stats 789123.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20152 bytes_read=85488 bytes_retransmit=9 bytes_invalid=0 send_seq=1733 receive_seq=1733 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993411 heater_bed: target=80 temp=49.5 pwm=1.000  sysload=0.24 cputime=14.482 memavail=7297324 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=241.8 pwm=0.285
Stats 789124.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20174 bytes_read=85596 bytes_retransmit=9 bytes_invalid=0 send_seq=1735 receive_seq=1735 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993404 heater_bed: target=80 temp=49.8 pwm=1.000  sysload=0.24 cputime=14.500 memavail=7297340 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=241.8 pwm=0.215
Stats 789125.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20212 bytes_read=85738 bytes_retransmit=9 bytes_invalid=0 send_seq=1738 receive_seq=1738 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993397 heater_bed: target=80 temp=50.1 pwm=1.000  sysload=0.24 cputime=14.519 memavail=7297100 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=241.9 pwm=0.182
Stats 789126.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20267 bytes_read=85881 bytes_retransmit=9 bytes_invalid=0 send_seq=1742 receive_seq=1742 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993388 heater_bed: target=80 temp=50.4 pwm=1.000  sysload=0.24 cputime=14.535 memavail=7296848 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=241.8 pwm=0.196
Stats 789127.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20305 bytes_read=85994 bytes_retransmit=9 bytes_invalid=0 send_seq=1745 receive_seq=1745 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993458 heater_bed: target=80 temp=50.7 pwm=1.000  sysload=0.22 cputime=14.552 memavail=7296848 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=241.8 pwm=0.182
Stats 789128.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20343 bytes_read=86136 bytes_retransmit=9 bytes_invalid=0 send_seq=1748 receive_seq=1748 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993454 heater_bed: target=80 temp=51.1 pwm=1.000  sysload=0.22 cputime=14.576 memavail=7296848 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=241.3 pwm=0.320
Stats 789129.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20365 bytes_read=86244 bytes_retransmit=9 bytes_invalid=0 send_seq=1750 receive_seq=1750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993444 heater_bed: target=80 temp=51.3 pwm=1.000  sysload=0.22 cputime=14.593 memavail=7296848 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=241.3 pwm=0.222
Stats 789130.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20403 bytes_read=86357 bytes_retransmit=9 bytes_invalid=0 send_seq=1753 receive_seq=1753 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993436 heater_bed: target=80 temp=51.6 pwm=1.000  sysload=0.22 cputime=14.612 memavail=7296744 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=241.2 pwm=0.272
Stats 789131.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20441 bytes_read=86513 bytes_retransmit=9 bytes_invalid=0 send_seq=1756 receive_seq=1756 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993433 heater_bed: target=80 temp=52.0 pwm=1.000  sysload=0.22 cputime=14.631 memavail=7296852 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=241.1 pwm=0.254
Stats 789132.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20458 bytes_read=86616 bytes_retransmit=9 bytes_invalid=0 send_seq=1757 receive_seq=1757 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993424 heater_bed: target=80 temp=52.2 pwm=1.000  sysload=0.20 cputime=14.652 memavail=7296852 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=241.1 pwm=0.151
Stats 789133.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20480 bytes_read=86724 bytes_retransmit=9 bytes_invalid=0 send_seq=1759 receive_seq=1759 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993417 heater_bed: target=80 temp=52.5 pwm=1.000  sysload=0.20 cputime=14.675 memavail=7296852 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.9 pwm=0.269
Stats 789134.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20534 bytes_read=86871 bytes_retransmit=9 bytes_invalid=0 send_seq=1763 receive_seq=1763 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993409 heater_bed: target=80 temp=52.9 pwm=1.000  sysload=0.20 cputime=14.697 memavail=7296348 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.6 pwm=0.273
Stats 789135.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20572 bytes_read=86984 bytes_retransmit=9 bytes_invalid=0 send_seq=1766 receive_seq=1766 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993400 heater_bed: target=80 temp=53.2 pwm=1.000  sysload=0.20 cputime=14.721 memavail=7297476 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.6 pwm=0.279
Stats 789136.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20610 bytes_read=87111 bytes_retransmit=9 bytes_invalid=0 send_seq=1769 receive_seq=1769 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993400 heater_bed: target=80 temp=53.4 pwm=1.000  sysload=0.20 cputime=14.746 memavail=7297252 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.4 pwm=0.318
Stats 789137.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20648 bytes_read=87253 bytes_retransmit=9 bytes_invalid=0 send_seq=1772 receive_seq=1772 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993390 heater_bed: target=80 temp=53.8 pwm=1.000  sysload=0.18 cputime=14.759 memavail=7297252 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.4 pwm=0.268
Stats 789138.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20734 bytes_read=87381 bytes_retransmit=9 bytes_invalid=0 send_seq=1778 receive_seq=1778 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993384 heater_bed: target=80 temp=54.1 pwm=1.000  sysload=0.18 cputime=14.779 memavail=7297252 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.4 pwm=0.240
Stats 789139.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20751 bytes_read=87499 bytes_retransmit=9 bytes_invalid=0 send_seq=1779 receive_seq=1779 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993374 heater_bed: target=80 temp=54.4 pwm=1.000  sysload=0.18 cputime=14.794 memavail=7297252 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.5 pwm=0.188
Stats 789140.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20805 bytes_read=87631 bytes_retransmit=9 bytes_invalid=0 send_seq=1783 receive_seq=1783 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993416 heater_bed: target=80 temp=54.6 pwm=1.000  sysload=0.18 cputime=14.821 memavail=7297028 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.4 pwm=0.239
Stats 789141.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20843 bytes_read=87758 bytes_retransmit=9 bytes_invalid=0 send_seq=1786 receive_seq=1786 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993409 heater_bed: target=80 temp=54.9 pwm=1.000  sysload=0.18 cputime=14.839 memavail=7297028 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.4 pwm=0.180
Stats 789142.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20876 bytes_read=87881 bytes_retransmit=9 bytes_invalid=0 send_seq=1788 receive_seq=1788 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993408 heater_bed: target=80 temp=55.3 pwm=1.000  sysload=0.17 cputime=14.858 memavail=7297028 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.2 pwm=0.246
Stats 789143.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20893 bytes_read=87998 bytes_retransmit=9 bytes_invalid=0 send_seq=1789 receive_seq=1789 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993405 heater_bed: target=80 temp=55.6 pwm=1.000  sysload=0.17 cputime=14.875 memavail=7297176 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.0 pwm=0.337
Stats 789144.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20915 bytes_read=88106 bytes_retransmit=9 bytes_invalid=0 send_seq=1791 receive_seq=1791 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993399 heater_bed: target=80 temp=55.8 pwm=1.000  sysload=0.17 cputime=14.889 memavail=7297280 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.1 pwm=0.227
Stats 789145.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20953 bytes_read=88234 bytes_retransmit=9 bytes_invalid=0 send_seq=1794 receive_seq=1794 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993450 heater_bed: target=80 temp=56.2 pwm=1.000  sysload=0.17 cputime=14.914 memavail=7296804 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.1 pwm=0.198
Stats 789146.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=20991 bytes_read=88375 bytes_retransmit=9 bytes_invalid=0 send_seq=1797 receive_seq=1797 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993443 heater_bed: target=80 temp=56.4 pwm=1.000  sysload=0.17 cputime=14.933 memavail=7296804 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.1 pwm=0.237
Stats 789147.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21013 bytes_read=88482 bytes_retransmit=9 bytes_invalid=0 send_seq=1799 receive_seq=1799 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993433 heater_bed: target=80 temp=56.7 pwm=1.000  sysload=0.16 cputime=14.947 memavail=7297060 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.1 pwm=0.237
Stats 789148.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21019 bytes_read=88592 bytes_retransmit=9 bytes_invalid=0 send_seq=1800 receive_seq=1800 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993426 heater_bed: target=80 temp=57.0 pwm=1.000  sysload=0.16 cputime=14.968 memavail=7297060 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.2 pwm=0.237
Stats 789149.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21057 bytes_read=88711 bytes_retransmit=9 bytes_invalid=0 send_seq=1803 receive_seq=1803 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993450 heater_bed: target=80 temp=57.3 pwm=1.000  sysload=0.16 cputime=14.992 memavail=7297060 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.1 pwm=0.253
Stats 789150.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21090 bytes_read=88819 bytes_retransmit=9 bytes_invalid=0 send_seq=1805 receive_seq=1805 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993440 heater_bed: target=80 temp=57.5 pwm=1.000  sysload=0.16 cputime=15.009 memavail=7296572 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.0 pwm=0.288
Stats 789151.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21128 bytes_read=88961 bytes_retransmit=9 bytes_invalid=0 send_seq=1808 receive_seq=1808 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993427 heater_bed: target=80 temp=57.8 pwm=1.000  sysload=0.16 cputime=15.030 memavail=7296580 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.1 pwm=0.229
Stats 789152.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21134 bytes_read=89078 bytes_retransmit=9 bytes_invalid=0 send_seq=1809 receive_seq=1809 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993415 heater_bed: target=80 temp=58.1 pwm=1.000  sysload=0.14 cputime=15.041 memavail=7296580 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=239.8 pwm=0.375
Stats 789153.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21188 bytes_read=89196 bytes_retransmit=9 bytes_invalid=0 send_seq=1813 receive_seq=1813 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993403 heater_bed: target=80 temp=58.4 pwm=1.000  sysload=0.14 cputime=15.051 memavail=7296728 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=239.9 pwm=0.297
Stats 789154.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21226 bytes_read=89324 bytes_retransmit=9 bytes_invalid=0 send_seq=1816 receive_seq=1816 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993457 heater_bed: target=80 temp=58.7 pwm=1.000  sysload=0.14 cputime=15.078 memavail=7296832 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=239.9 pwm=0.253
Stats 789155.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21248 bytes_read=89446 bytes_retransmit=9 bytes_invalid=0 send_seq=1818 receive_seq=1818 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993444 heater_bed: target=80 temp=59.0 pwm=1.000  sysload=0.14 cputime=15.102 memavail=7296832 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=239.9 pwm=0.253
Stats 789156.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21302 bytes_read=89578 bytes_retransmit=9 bytes_invalid=0 send_seq=1822 receive_seq=1822 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993432 heater_bed: target=80 temp=59.2 pwm=1.000  sysload=0.14 cputime=15.121 memavail=7296832 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=239.6 pwm=0.430
Stats 789157.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21335 bytes_read=89701 bytes_retransmit=9 bytes_invalid=0 send_seq=1824 receive_seq=1824 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993425 heater_bed: target=80 temp=59.5 pwm=1.000  sysload=0.13 cputime=15.138 memavail=7296832 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=239.9 pwm=0.269
Stats 789158.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21341 bytes_read=89818 bytes_retransmit=9 bytes_invalid=0 send_seq=1825 receive_seq=1825 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993450 heater_bed: target=80 temp=59.7 pwm=1.000  sysload=0.13 cputime=15.158 memavail=7296832 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.0 pwm=0.269
Stats 789159.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21395 bytes_read=89936 bytes_retransmit=9 bytes_invalid=0 send_seq=1829 receive_seq=1829 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993439 heater_bed: target=80 temp=60.0 pwm=1.000  sysload=0.13 cputime=15.172 memavail=7296832 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=239.6 pwm=0.368
Stats 789160.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21433 bytes_read=90064 bytes_retransmit=9 bytes_invalid=0 send_seq=1832 receive_seq=1832 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993427 heater_bed: target=80 temp=60.3 pwm=1.000  sysload=0.13 cputime=15.186 memavail=7297320 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=239.9 pwm=0.275
Stats 789161.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21471 bytes_read=90205 bytes_retransmit=9 bytes_invalid=0 send_seq=1835 receive_seq=1835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993418 heater_bed: target=80 temp=60.5 pwm=1.000  sysload=0.13 cputime=15.212 memavail=7290212 print_time=594.248 buffer_time=0.000 print_stall=0 extruder: target=240 temp=240.1 pwm=0.205
Starting SD card print (position 0)
Heater extruder approaching new target of 250.000
Stats 789162.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21525 bytes_read=90323 bytes_retransmit=9 bytes_invalid=0 send_seq=1839 receive_seq=1839 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993406 heater_bed: target=80 temp=60.8 pwm=1.000 sd_pos=13787 sysload=0.20 cputime=15.263 memavail=7302164 print_time=694.483 buffer_time=0.087 print_stall=0 extruder: target=250 temp=240.3 pwm=1.000
Stats 789163.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21547 bytes_read=90446 bytes_retransmit=9 bytes_invalid=0 send_seq=1841 receive_seq=1841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993456 heater_bed: target=80 temp=61.1 pwm=1.000 sd_pos=13787 sysload=0.20 cputime=15.293 memavail=7297776 print_time=695.484 buffer_time=0.087 print_stall=0 extruder: target=250 temp=240.2 pwm=1.000
Stats 789164.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21553 bytes_read=90563 bytes_retransmit=9 bytes_invalid=0 send_seq=1842 receive_seq=1842 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993442 heater_bed: target=80 temp=61.3 pwm=1.000 sd_pos=13787 sysload=0.20 cputime=15.325 memavail=7296556 print_time=696.484 buffer_time=0.087 print_stall=0 extruder: target=250 temp=241.0 pwm=1.000
Stats 789165.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21575 bytes_read=90671 bytes_retransmit=9 bytes_invalid=0 send_seq=1844 receive_seq=1844 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993429 heater_bed: target=80 temp=61.6 pwm=1.000 sd_pos=13787 sysload=0.20 cputime=15.357 memavail=7296200 print_time=697.484 buffer_time=0.086 print_stall=0 extruder: target=250 temp=242.6 pwm=0.842
Stats 789166.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21629 bytes_read=90818 bytes_retransmit=9 bytes_invalid=0 send_seq=1848 receive_seq=1848 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993415 heater_bed: target=80 temp=61.9 pwm=1.000 sd_pos=13787 sysload=0.20 cputime=15.377 memavail=7296308 print_time=698.485 buffer_time=0.086 print_stall=0 extruder: target=250 temp=244.4 pwm=0.525
Heater extruder within range of 250.000
Stats 789167.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21683 bytes_read=90950 bytes_retransmit=9 bytes_invalid=0 send_seq=1852 receive_seq=1852 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993445 heater_bed: target=80 temp=62.1 pwm=1.000 sd_pos=13787 sysload=0.27 cputime=15.406 memavail=7298360 print_time=699.486 buffer_time=0.086 print_stall=0 extruder: target=250 temp=247.3 pwm=0.070
Stats 789168.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21735 bytes_read=91068 bytes_retransmit=9 bytes_invalid=0 send_seq=1856 receive_seq=1856 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993434 heater_bed: target=80 temp=62.3 pwm=1.000 sd_pos=13787 sysload=0.27 cputime=15.434 memavail=7298136 print_time=700.486 buffer_time=0.085 print_stall=0 extruder: target=250 temp=248.5 pwm=0.117
Stats 789169.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21773 bytes_read=91196 bytes_retransmit=9 bytes_invalid=0 send_seq=1859 receive_seq=1859 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993424 heater_bed: target=80 temp=62.7 pwm=1.000 sd_pos=13787 sysload=0.27 cputime=15.461 memavail=7297912 print_time=701.487 buffer_time=0.085 print_stall=0 extruder: target=250 temp=248.8 pwm=0.405
Stats 789170.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21779 bytes_read=91313 bytes_retransmit=9 bytes_invalid=0 send_seq=1860 receive_seq=1860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993415 heater_bed: target=80 temp=62.9 pwm=1.000 sd_pos=13787 sysload=0.27 cputime=15.484 memavail=7298808 print_time=702.487 buffer_time=0.084 print_stall=0 extruder: target=250 temp=249.3 pwm=0.405
Stats 789171.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21796 bytes_read=91430 bytes_retransmit=9 bytes_invalid=0 send_seq=1861 receive_seq=1861 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993405 heater_bed: target=80 temp=63.1 pwm=1.000 sd_pos=13787 sysload=0.27 cputime=15.506 memavail=7297948 print_time=703.488 buffer_time=0.084 print_stall=0 extruder: target=250 temp=249.4 pwm=0.515
Stats 789172.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21850 bytes_read=91563 bytes_retransmit=9 bytes_invalid=0 send_seq=1865 receive_seq=1865 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993396 heater_bed: target=80 temp=63.4 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=15.531 memavail=7297948 print_time=704.488 buffer_time=0.084 print_stall=0 extruder: target=250 temp=249.3 pwm=0.615
Stats 789173.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21904 bytes_read=91695 bytes_retransmit=9 bytes_invalid=0 send_seq=1869 receive_seq=1869 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993389 heater_bed: target=80 temp=63.6 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=15.558 memavail=7297948 print_time=705.489 buffer_time=0.084 print_stall=0 extruder: target=250 temp=250.4 pwm=0.261
Stats 789174.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21926 bytes_read=91803 bytes_retransmit=9 bytes_invalid=0 send_seq=1871 receive_seq=1871 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993381 heater_bed: target=80 temp=63.9 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=15.587 memavail=7297948 print_time=706.489 buffer_time=0.084 print_stall=0 extruder: target=250 temp=250.7 pwm=0.261
Stats 789175.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21979 bytes_read=91936 bytes_retransmit=9 bytes_invalid=0 send_seq=1875 receive_seq=1875 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993369 heater_bed: target=80 temp=64.2 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=15.613 memavail=7297948 print_time=707.490 buffer_time=0.084 print_stall=0 extruder: target=250 temp=251.3 pwm=0.135
Stats 789176.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22033 bytes_read=92082 bytes_retransmit=9 bytes_invalid=0 send_seq=1879 receive_seq=1879 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993362 heater_bed: target=80 temp=64.4 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=15.640 memavail=7297948 print_time=708.491 buffer_time=0.084 print_stall=0 extruder: target=250 temp=251.2 pwm=0.299
Stats 789177.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22071 bytes_read=92195 bytes_retransmit=9 bytes_invalid=0 send_seq=1882 receive_seq=1882 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993354 heater_bed: target=80 temp=64.6 pwm=1.000 sd_pos=13787 sysload=0.38 cputime=15.666 memavail=7297948 print_time=709.491 buffer_time=0.084 print_stall=0 extruder: target=250 temp=251.0 pwm=0.329
Stats 789178.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22109 bytes_read=92323 bytes_retransmit=9 bytes_invalid=0 send_seq=1885 receive_seq=1885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993346 heater_bed: target=80 temp=64.9 pwm=1.000 sd_pos=13787 sysload=0.38 cputime=15.696 memavail=7297948 print_time=710.493 buffer_time=0.085 print_stall=0 extruder: target=250 temp=250.9 pwm=0.370
Stats 789179.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22147 bytes_read=92450 bytes_retransmit=9 bytes_invalid=0 send_seq=1888 receive_seq=1888 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993343 heater_bed: target=80 temp=65.2 pwm=1.000 sd_pos=13787 sysload=0.38 cputime=15.723 memavail=7297724 print_time=711.494 buffer_time=0.085 print_stall=0 extruder: target=250 temp=250.9 pwm=0.259
Stats 789180.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22201 bytes_read=92568 bytes_retransmit=9 bytes_invalid=0 send_seq=1892 receive_seq=1892 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993345 heater_bed: target=80 temp=65.4 pwm=1.000 sd_pos=13787 sysload=0.38 cputime=15.751 memavail=7297724 print_time=712.494 buffer_time=0.085 print_stall=0 extruder: target=250 temp=250.9 pwm=0.316
Stats 789181.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22239 bytes_read=92710 bytes_retransmit=9 bytes_invalid=0 send_seq=1895 receive_seq=1895 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993345 heater_bed: target=80 temp=65.7 pwm=1.000 sd_pos=13787 sysload=0.38 cputime=15.777 memavail=7297728 print_time=713.495 buffer_time=0.085 print_stall=0 extruder: target=250 temp=250.9 pwm=0.303
Stats 789182.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22303 bytes_read=92837 bytes_retransmit=9 bytes_invalid=0 send_seq=1899 receive_seq=1898 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993343 heater_bed: target=80 temp=65.9 pwm=1.000 sd_pos=13787 sysload=0.35 cputime=15.809 memavail=7297728 print_time=714.495 buffer_time=0.085 print_stall=0 extruder: target=250 temp=251.2 pwm=0.223
Stats 789183.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22309 bytes_read=92943 bytes_retransmit=9 bytes_invalid=0 send_seq=1900 receive_seq=1900 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993338 heater_bed: target=80 temp=66.1 pwm=1.000 sd_pos=13787 sysload=0.35 cputime=15.831 memavail=7297728 print_time=715.498 buffer_time=0.087 print_stall=0 extruder: target=250 temp=251.1 pwm=0.223
Stats 789184.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22363 bytes_read=93068 bytes_retransmit=9 bytes_invalid=0 send_seq=1904 receive_seq=1904 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993336 heater_bed: target=80 temp=66.4 pwm=1.000 sd_pos=13787 sysload=0.35 cputime=15.854 memavail=7296972 print_time=716.497 buffer_time=0.086 print_stall=0 extruder: target=250 temp=250.7 pwm=0.357
Stats 789185.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22417 bytes_read=93194 bytes_retransmit=9 bytes_invalid=0 send_seq=1908 receive_seq=1908 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993393 heater_bed: target=80 temp=66.6 pwm=1.000 sd_pos=13787 sysload=0.35 cputime=15.879 memavail=7296228 print_time=717.497 buffer_time=0.086 print_stall=0 extruder: target=250 temp=250.6 pwm=0.296
Stats 789186.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22455 bytes_read=93320 bytes_retransmit=9 bytes_invalid=0 send_seq=1911 receive_seq=1911 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993385 heater_bed: target=80 temp=66.8 pwm=1.000 sd_pos=13787 sysload=0.35 cputime=15.908 memavail=7296232 print_time=718.498 buffer_time=0.086 print_stall=0 extruder: target=250 temp=250.5 pwm=0.330
Stats 789187.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22483 bytes_read=93459 bytes_retransmit=9 bytes_invalid=0 send_seq=1914 receive_seq=1914 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993370 heater_bed: target=80 temp=67.1 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=15.936 memavail=7296232 print_time=719.499 buffer_time=0.086 print_stall=0 extruder: target=250 temp=250.4 pwm=0.256
Stats 789188.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22505 bytes_read=93581 bytes_retransmit=9 bytes_invalid=0 send_seq=1916 receive_seq=1916 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993408 heater_bed: target=80 temp=67.3 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=15.965 memavail=7296232 print_time=720.500 buffer_time=0.086 print_stall=0 extruder: target=250 temp=250.5 pwm=0.256
Stats 789189.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22527 bytes_read=93689 bytes_retransmit=9 bytes_invalid=0 send_seq=1918 receive_seq=1918 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993398 heater_bed: target=80 temp=67.5 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=15.987 memavail=7296232 print_time=721.500 buffer_time=0.087 print_stall=0 extruder: target=250 temp=250.6 pwm=0.206
Stats 789190.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22533 bytes_read=93807 bytes_retransmit=9 bytes_invalid=0 send_seq=1919 receive_seq=1919 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993390 heater_bed: target=80 temp=67.8 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=16.006 memavail=7295732 print_time=722.501 buffer_time=0.087 print_stall=0 extruder: target=250 temp=250.5 pwm=0.206
Stats 789191.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22602 bytes_read=93958 bytes_retransmit=9 bytes_invalid=0 send_seq=1924 receive_seq=1924 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993382 heater_bed: target=80 temp=68.0 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=16.040 memavail=7295732 print_time=723.503 buffer_time=0.088 print_stall=0 extruder: target=250 temp=250.3 pwm=0.328
Stats 789192.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22640 bytes_read=94071 bytes_retransmit=9 bytes_invalid=0 send_seq=1927 receive_seq=1927 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993375 heater_bed: target=80 temp=68.2 pwm=1.000 sd_pos=13787 sysload=0.45 cputime=16.072 memavail=7295732 print_time=724.505 buffer_time=0.090 print_stall=0 extruder: target=250 temp=250.1 pwm=0.335
Stats 789193.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22678 bytes_read=94199 bytes_retransmit=9 bytes_invalid=0 send_seq=1930 receive_seq=1930 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993373 heater_bed: target=80 temp=68.5 pwm=1.000 sd_pos=13787 sysload=0.45 cputime=16.098 memavail=7295732 print_time=725.507 buffer_time=0.091 print_stall=0 extruder: target=250 temp=250.1 pwm=0.284
Stats 789194.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22732 bytes_read=94331 bytes_retransmit=9 bytes_invalid=0 send_seq=1934 receive_seq=1934 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993368 heater_bed: target=80 temp=68.7 pwm=1.000 sd_pos=13787 sysload=0.45 cputime=16.129 memavail=7295732 print_time=726.506 buffer_time=0.090 print_stall=0 extruder: target=250 temp=250.1 pwm=0.296
Stats 789195.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22749 bytes_read=94434 bytes_retransmit=9 bytes_invalid=0 send_seq=1935 receive_seq=1935 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993363 heater_bed: target=80 temp=68.9 pwm=1.000 sd_pos=13787 sysload=0.45 cputime=16.147 memavail=7295732 print_time=727.507 buffer_time=0.090 print_stall=0 extruder: target=250 temp=249.9 pwm=0.369
Stats 789196.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22803 bytes_read=94581 bytes_retransmit=9 bytes_invalid=0 send_seq=1939 receive_seq=1939 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993372 heater_bed: target=80 temp=69.2 pwm=1.000 sd_pos=13787 sysload=0.45 cputime=16.178 memavail=7295732 print_time=728.510 buffer_time=0.093 print_stall=0 extruder: target=250 temp=249.5 pwm=0.501
Stats 789197.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22889 bytes_read=94723 bytes_retransmit=9 bytes_invalid=0 send_seq=1945 receive_seq=1945 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993402 heater_bed: target=80 temp=69.3 pwm=1.000 sd_pos=13787 sysload=0.42 cputime=16.209 memavail=7295508 print_time=729.509 buffer_time=0.091 print_stall=0 extruder: target=250 temp=248.7 pwm=0.662
Stats 789198.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22927 bytes_read=94836 bytes_retransmit=9 bytes_invalid=0 send_seq=1948 receive_seq=1948 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993392 heater_bed: target=80 temp=69.5 pwm=1.000 sd_pos=13787 sysload=0.42 cputime=16.237 memavail=7295508 print_time=730.512 buffer_time=0.094 print_stall=0 extruder: target=250 temp=248.0 pwm=0.867
Stats 789199.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22981 bytes_read=94969 bytes_retransmit=9 bytes_invalid=0 send_seq=1952 receive_seq=1952 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993382 heater_bed: target=80 temp=69.8 pwm=1.000 sd_pos=13787 sysload=0.42 cputime=16.262 memavail=7295508 print_time=731.512 buffer_time=0.094 print_stall=0 extruder: target=250 temp=248.2 pwm=0.652
Stats 789200.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23019 bytes_read=95096 bytes_retransmit=9 bytes_invalid=0 send_seq=1955 receive_seq=1955 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993381 heater_bed: target=80 temp=70.0 pwm=1.000 sd_pos=13787 sysload=0.42 cputime=16.284 memavail=7295508 print_time=732.513 buffer_time=0.093 print_stall=0 extruder: target=250 temp=248.7 pwm=0.450
Stats 789201.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=23073 bytes_read=95228 bytes_retransmit=9 bytes_invalid=0 send_seq=1959 receive_seq=1959 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993375 heater_bed: target=80 temp=70.2 pwm=1.000 sd_pos=13787 sysload=0.42 cputime=16.309 memavail=7295272 print_time=733.513 buffer_time=0.094 print_stall=0 extruder: target=250 temp=248.9 pwm=0.481
Stats 789202.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=23090 bytes_read=95346 bytes_retransmit=9 bytes_invalid=0 send_seq=1960 receive_seq=1960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993367 heater_bed: target=80 temp=70.5 pwm=1.000 sd_pos=13787 sysload=0.38 cputime=16.336 memavail=7295272 print_time=734.514 buffer_time=0.093 print_stall=0 extruder: target=250 temp=249.2 pwm=0.416
Stats 789203.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=23144 bytes_read=95478 bytes_retransmit=9 bytes_invalid=0 send_seq=1964 receive_seq=1964 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993360 heater_bed: target=80 temp=70.7 pwm=1.000 sd_pos=13787 sysload=0.38 cputime=16.364 memavail=7295272 print_time=735.514 buffer_time=0.093 print_stall=0 extruder: target=250 temp=249.2 pwm=0.494
Stats 789204.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=23182 bytes_read=95591 bytes_retransmit=9 bytes_invalid=0 send_seq=1967 receive_seq=1967 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993356 heater_bed: target=80 temp=70.9 pwm=1.000 sd_pos=13787 sysload=0.38 cputime=16.385 memavail=7295272 print_time=736.514 buffer_time=0.093 print_stall=0 extruder: target=250 temp=249.3 pwm=0.519
Stats 789205.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=23252 bytes_read=95729 bytes_retransmit=9 bytes_invalid=0 send_seq=1972 receive_seq=1972 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993347 heater_bed: target=80 temp=71.2 pwm=1.000 sd_pos=13787 sysload=0.38 cputime=16.410 memavail=7295272 print_time=737.515 buffer_time=0.093 print_stall=0 extruder: target=250 temp=249.8 pwm=0.398
Stats 789206.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23322 bytes_read=95880 bytes_retransmit=9 bytes_invalid=0 send_seq=1977 receive_seq=1977 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993339 heater_bed: target=80 temp=71.4 pwm=1.000 sd_pos=13787 sysload=0.38 cputime=16.432 memavail=7295048 print_time=738.516 buffer_time=0.093 print_stall=0 extruder: target=250 temp=250.0 pwm=0.383
Stats 789207.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23344 bytes_read=95988 bytes_retransmit=9 bytes_invalid=0 send_seq=1979 receive_seq=1979 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993335 heater_bed: target=80 temp=71.6 pwm=1.000 sd_pos=13787 sysload=0.35 cputime=16.455 memavail=7295048 print_time=739.517 buffer_time=0.093 print_stall=0 extruder: target=250 temp=250.5 pwm=0.229
Stats 789208.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23398 bytes_read=96121 bytes_retransmit=9 bytes_invalid=0 send_seq=1983 receive_seq=1983 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993331 heater_bed: target=80 temp=71.8 pwm=1.000 sd_pos=13787 sysload=0.35 cputime=16.482 memavail=7295048 print_time=740.518 buffer_time=0.094 print_stall=0 extruder: target=250 temp=250.6 pwm=0.289
Stats 789209.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23452 bytes_read=96253 bytes_retransmit=9 bytes_invalid=0 send_seq=1987 receive_seq=1987 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993326 heater_bed: target=80 temp=72.0 pwm=1.000 sd_pos=13787 sysload=0.35 cputime=16.505 memavail=7295048 print_time=741.519 buffer_time=0.094 print_stall=0 extruder: target=250 temp=250.7 pwm=0.298
Stats 789210.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23506 bytes_read=96371 bytes_retransmit=9 bytes_invalid=0 send_seq=1991 receive_seq=1991 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993364 heater_bed: target=80 temp=72.2 pwm=1.000 sd_pos=13787 sysload=0.35 cputime=16.527 memavail=7294040 print_time=742.520 buffer_time=0.094 print_stall=0 extruder: target=250 temp=250.4 pwm=0.434
Stats 789211.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23544 bytes_read=96513 bytes_retransmit=9 bytes_invalid=0 send_seq=1994 receive_seq=1994 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993358 heater_bed: target=80 temp=72.4 pwm=1.000 sd_pos=13787 sysload=0.35 cputime=16.551 memavail=7294040 print_time=743.521 buffer_time=0.095 print_stall=0 extruder: target=250 temp=250.9 pwm=0.195
Stats 789212.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23582 bytes_read=96640 bytes_retransmit=9 bytes_invalid=0 send_seq=1997 receive_seq=1997 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993355 heater_bed: target=80 temp=72.6 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=16.579 memavail=7293800 print_time=744.521 buffer_time=0.095 print_stall=0 extruder: target=250 temp=250.9 pwm=0.199
Stats 789213.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23588 bytes_read=96743 bytes_retransmit=9 bytes_invalid=0 send_seq=1998 receive_seq=1998 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993348 heater_bed: target=80 temp=72.8 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=16.605 memavail=7293804 print_time=745.522 buffer_time=0.095 print_stall=0 extruder: target=250 temp=251.0 pwm=0.199
Stats 789214.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23642 bytes_read=96876 bytes_retransmit=9 bytes_invalid=0 send_seq=2002 receive_seq=2002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993345 heater_bed: target=80 temp=73.1 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=16.626 memavail=7296608 print_time=746.523 buffer_time=0.096 print_stall=0 extruder: target=250 temp=251.0 pwm=0.179
Stats 789215.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23680 bytes_read=97003 bytes_retransmit=9 bytes_invalid=0 send_seq=2005 receive_seq=2005 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993389 heater_bed: target=80 temp=73.2 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=16.650 memavail=7296608 print_time=747.524 buffer_time=0.096 print_stall=0 extruder: target=250 temp=250.4 pwm=0.400
Stats 789216.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23713 bytes_read=97125 bytes_retransmit=9 bytes_invalid=0 send_seq=2007 receive_seq=2007 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993389 heater_bed: target=80 temp=73.4 pwm=1.000 sd_pos=13787 sysload=0.32 cputime=16.681 memavail=7296356 print_time=748.525 buffer_time=0.097 print_stall=0 extruder: target=250 temp=250.7 pwm=0.205
Stats 789217.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23751 bytes_read=97253 bytes_retransmit=9 bytes_invalid=0 send_seq=2010 receive_seq=2010 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993381 heater_bed: target=80 temp=73.7 pwm=0.914 sd_pos=13787 sysload=0.30 cputime=16.713 memavail=7296356 print_time=749.525 buffer_time=0.097 print_stall=0 extruder: target=250 temp=250.5 pwm=0.273
Stats 789218.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23836 bytes_read=97395 bytes_retransmit=9 bytes_invalid=0 send_seq=2016 receive_seq=2016 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993374 heater_bed: target=80 temp=73.8 pwm=1.000 sd_pos=13787 sysload=0.30 cputime=16.739 memavail=7296356 print_time=750.526 buffer_time=0.097 print_stall=0 extruder: target=250 temp=250.9 pwm=0.102
Stats 789219.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23890 bytes_read=97509 bytes_retransmit=9 bytes_invalid=0 send_seq=2020 receive_seq=2020 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993380 heater_bed: target=80 temp=74.0 pwm=1.000 sd_pos=13787 sysload=0.30 cputime=16.766 memavail=7296356 print_time=751.527 buffer_time=0.097 print_stall=0 extruder: target=250 temp=250.7 pwm=0.196
Stats 789220.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23928 bytes_read=97629 bytes_retransmit=9 bytes_invalid=0 send_seq=2023 receive_seq=2023 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993372 heater_bed: target=80 temp=74.3 pwm=1.000 sd_pos=13787 sysload=0.30 cputime=16.791 memavail=7296548 print_time=752.528 buffer_time=0.098 print_stall=0 extruder: target=250 temp=250.6 pwm=0.196
Stats 789221.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=23998 bytes_read=97775 bytes_retransmit=9 bytes_invalid=0 send_seq=2028 receive_seq=2028 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993366 heater_bed: target=80 temp=74.5 pwm=0.854 sd_pos=13787 sysload=0.30 cputime=16.819 memavail=7296612 print_time=753.528 buffer_time=0.098 print_stall=0 extruder: target=250 temp=250.4 pwm=0.283
Stats 789222.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=24036 bytes_read=97888 bytes_retransmit=9 bytes_invalid=0 send_seq=2031 receive_seq=2031 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993364 heater_bed: target=80 temp=74.6 pwm=0.931 sd_pos=13787 sysload=0.27 cputime=16.846 memavail=7296612 print_time=754.529 buffer_time=0.097 print_stall=0 extruder: target=250 temp=250.3 pwm=0.334
Stats 789223.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=24090 bytes_read=98021 bytes_retransmit=9 bytes_invalid=0 send_seq=2035 receive_seq=2035 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993357 heater_bed: target=80 temp=74.9 pwm=0.894 sd_pos=13787 sysload=0.27 cputime=16.874 memavail=7296612 print_time=755.530 buffer_time=0.097 print_stall=0 extruder: target=250 temp=250.3 pwm=0.229
Stats 789224.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=24112 bytes_read=98143 bytes_retransmit=9 bytes_invalid=0 send_seq=2037 receive_seq=2037 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993390 heater_bed: target=80 temp=75.0 pwm=0.894 sd_pos=13787 sysload=0.27 cputime=16.899 memavail=7296612 print_time=756.531 buffer_time=0.098 print_stall=0 extruder: target=250 temp=250.3 pwm=0.282
Heater heater_bed within range of 80.000
Stats 789225.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=24166 bytes_read=98261 bytes_retransmit=9 bytes_invalid=0 send_seq=2041 receive_seq=2041 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993382 heater_bed: target=80 temp=75.2 pwm=0.894 sd_pos=13787 sysload=0.27 cputime=16.929 memavail=7296612 print_time=757.532 buffer_time=0.099 print_stall=0 extruder: target=250 temp=250.4 pwm=0.197
Stats 789226.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=24247 bytes_read=98413 bytes_retransmit=9 bytes_invalid=0 send_seq=2046 receive_seq=2046 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993374 heater_bed: target=80 temp=75.4 pwm=0.840 sd_pos=13787 sysload=0.27 cputime=16.959 memavail=7296612 print_time=758.532 buffer_time=0.099 print_stall=0 extruder: target=250 temp=250.2 pwm=0.242
Stats 789227.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=24312 bytes_read=98545 bytes_retransmit=9 bytes_invalid=0 send_seq=2050 receive_seq=2050 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993368 heater_bed: target=80 temp=75.6 pwm=0.822 sd_pos=13787 sysload=0.25 cputime=16.984 memavail=7296612 print_time=759.533 buffer_time=0.099 print_stall=0 extruder: target=250 temp=250.0 pwm=0.297
Stats 789228.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=24382 bytes_read=98668 bytes_retransmit=9 bytes_invalid=0 send_seq=2055 receive_seq=2055 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993411 heater_bed: target=80 temp=75.7 pwm=0.896 sd_pos=13787 sysload=0.25 cputime=17.012 memavail=7296612 print_time=760.533 buffer_time=0.099 print_stall=0 extruder: target=250 temp=250.4 pwm=0.196
Stats 789229.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=24452 bytes_read=98806 bytes_retransmit=9 bytes_invalid=0 send_seq=2060 receive_seq=2060 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993400 heater_bed: target=80 temp=76.0 pwm=0.828 sd_pos=13787 sysload=0.25 cputime=17.038 memavail=7295112 print_time=761.534 buffer_time=0.098 print_stall=0 extruder: target=250 temp=250.0 pwm=0.335
Stats 789230.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=24506 bytes_read=98938 bytes_retransmit=9 bytes_invalid=0 send_seq=2064 receive_seq=2064 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993389 heater_bed: target=80 temp=76.1 pwm=0.828 sd_pos=13787 sysload=0.25 cputime=17.070 memavail=7294612 print_time=762.535 buffer_time=0.098 print_stall=0 extruder: target=250 temp=250.1 pwm=0.271
Stats 789231.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24560 bytes_read=99070 bytes_retransmit=9 bytes_invalid=0 send_seq=2068 receive_seq=2068 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993387 heater_bed: target=80 temp=76.2 pwm=0.879 sd_pos=13787 sysload=0.25 cputime=17.109 memavail=7294612 print_time=763.535 buffer_time=0.097 print_stall=0 extruder: target=250 temp=250.1 pwm=0.210
Stats 789232.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24614 bytes_read=99203 bytes_retransmit=9 bytes_invalid=0 send_seq=2072 receive_seq=2072 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993380 heater_bed: target=80 temp=76.5 pwm=0.767 sd_pos=13787 sysload=0.23 cputime=17.145 memavail=7294616 print_time=764.536 buffer_time=0.097 print_stall=0 extruder: target=250 temp=250.1 pwm=0.220
Stats 789233.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24695 bytes_read=99340 bytes_retransmit=9 bytes_invalid=0 send_seq=2077 receive_seq=2077 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993373 heater_bed: target=80 temp=76.6 pwm=0.762 sd_pos=13787 sysload=0.23 cputime=17.177 memavail=7294112 print_time=765.537 buffer_time=0.097 print_stall=0 extruder: target=250 temp=250.2 pwm=0.198
Stats 789234.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24728 bytes_read=99448 bytes_retransmit=9 bytes_invalid=0 send_seq=2079 receive_seq=2079 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993366 heater_bed: target=80 temp=76.7 pwm=0.762 sd_pos=13787 sysload=0.23 cputime=17.203 memavail=7294112 print_time=766.537 buffer_time=0.097 print_stall=0 extruder: target=250 temp=249.9 pwm=0.363
Stats 789235.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24782 bytes_read=99581 bytes_retransmit=9 bytes_invalid=0 send_seq=2083 receive_seq=2083 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993359 heater_bed: target=80 temp=76.9 pwm=0.762 sd_pos=13787 sysload=0.23 cputime=17.236 memavail=7294112 print_time=767.538 buffer_time=0.096 print_stall=0 extruder: target=250 temp=250.2 pwm=0.208
Stats 789236.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=24868 bytes_read=99723 bytes_retransmit=9 bytes_invalid=0 send_seq=2089 receive_seq=2089 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993356 heater_bed: target=80 temp=77.0 pwm=0.776 sd_pos=13787 sysload=0.23 cputime=17.270 memavail=7294112 print_time=768.538 buffer_time=0.096 print_stall=0 extruder: target=250 temp=250.0 pwm=0.312
Stats 789237.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=24906 bytes_read=99850 bytes_retransmit=9 bytes_invalid=0 send_seq=2092 receive_seq=2092 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993398 heater_bed: target=80 temp=77.2 pwm=0.776 sd_pos=13787 sysload=0.21 cputime=17.307 memavail=7294112 print_time=769.540 buffer_time=0.096 print_stall=0 extruder: target=250 temp=250.0 pwm=0.260
Stats 789238.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=25008 bytes_read=99998 bytes_retransmit=9 bytes_invalid=0 send_seq=2099 receive_seq=2099 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993387 heater_bed: target=80 temp=77.4 pwm=0.629 sd_pos=13787 sysload=0.21 cputime=17.331 memavail=7294112 print_time=770.540 buffer_time=0.096 print_stall=0 extruder: target=250 temp=250.1 pwm=0.182
Stats 789239.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=25078 bytes_read=100135 bytes_retransmit=9 bytes_invalid=0 send_seq=2104 receive_seq=2104 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993386 heater_bed: target=80 temp=77.5 pwm=0.728 sd_pos=13787 sysload=0.21 cputime=17.356 memavail=7293888 print_time=771.541 buffer_time=0.096 print_stall=0 extruder: target=250 temp=250.0 pwm=0.307
Stats 789240.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=25175 bytes_read=100263 bytes_retransmit=9 bytes_invalid=0 send_seq=2110 receive_seq=2110 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993375 heater_bed: target=80 temp=77.6 pwm=0.754 sd_pos=13787 sysload=0.21 cputime=17.387 memavail=7294332 print_time=772.542 buffer_time=0.096 print_stall=0 extruder: target=250 temp=250.2 pwm=0.199
Stats 789241.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=25256 bytes_read=100401 bytes_retransmit=9 bytes_invalid=0 send_seq=2115 receive_seq=2115 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993369 heater_bed: target=80 temp=77.7 pwm=0.776 sd_pos=13787 sysload=0.21 cputime=17.414 memavail=7299932 print_time=773.543 buffer_time=0.096 print_stall=0 extruder: target=250 temp=249.9 pwm=0.347
Stats 789242.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25342 bytes_read=100557 bytes_retransmit=9 bytes_invalid=0 send_seq=2121 receive_seq=2121 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993359 heater_bed: target=80 temp=77.9 pwm=0.694 sd_pos=13787 sysload=0.20 cputime=17.440 memavail=7299680 print_time=774.544 buffer_time=0.096 print_stall=0 extruder: target=250 temp=250.0 pwm=0.230
Stats 789243.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25412 bytes_read=100680 bytes_retransmit=9 bytes_invalid=0 send_seq=2126 receive_seq=2126 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993350 heater_bed: target=80 temp=78.0 pwm=0.694 sd_pos=13787 sysload=0.20 cputime=17.463 memavail=7298936 print_time=775.544 buffer_time=0.095 print_stall=0 extruder: target=250 temp=249.9 pwm=0.263
Stats 789244.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25450 bytes_read=100808 bytes_retransmit=9 bytes_invalid=0 send_seq=2129 receive_seq=2129 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993341 heater_bed: target=80 temp=78.1 pwm=0.606 sd_pos=13787 sysload=0.20 cputime=17.491 memavail=7298712 print_time=776.545 buffer_time=0.095 print_stall=0 extruder: target=250 temp=250.1 pwm=0.194
Stats 789245.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25520 bytes_read=100945 bytes_retransmit=9 bytes_invalid=0 send_seq=2134 receive_seq=2134 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993331 heater_bed: target=80 temp=78.2 pwm=0.585 sd_pos=13787 sysload=0.20 cputime=17.520 memavail=7298712 print_time=777.546 buffer_time=0.095 print_stall=0 extruder: target=250 temp=250.2 pwm=0.222
Stats 789246.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25606 bytes_read=101073 bytes_retransmit=9 bytes_invalid=0 send_seq=2140 receive_seq=2140 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993378 heater_bed: target=80 temp=78.3 pwm=0.717 sd_pos=13787 sysload=0.20 cputime=17.556 memavail=7298712 print_time=778.549 buffer_time=0.097 print_stall=0 extruder: target=250 temp=250.2 pwm=0.223
Stats 789247.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25692 bytes_read=101230 bytes_retransmit=9 bytes_invalid=0 send_seq=2146 receive_seq=2146 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993369 heater_bed: target=80 temp=78.4 pwm=0.652 sd_pos=13787 sysload=0.18 cputime=17.585 memavail=7298712 print_time=779.551 buffer_time=0.099 print_stall=0 extruder: target=250 temp=249.9 pwm=0.320
Stats 789248.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25741 bytes_read=101357 bytes_retransmit=9 bytes_invalid=0 send_seq=2149 receive_seq=2149 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993362 heater_bed: target=80 temp=78.5 pwm=0.652 sd_pos=13787 sysload=0.18 cputime=17.610 memavail=7298472 print_time=780.551 buffer_time=0.099 print_stall=0 extruder: target=250 temp=249.9 pwm=0.323
Stats 789249.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25769 bytes_read=101481 bytes_retransmit=9 bytes_invalid=0 send_seq=2152 receive_seq=2152 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993359 heater_bed: target=80 temp=78.6 pwm=0.652 sd_pos=13787 sysload=0.18 cputime=17.635 memavail=7298472 print_time=781.552 buffer_time=0.099 print_stall=0 extruder: target=250 temp=249.9 pwm=0.265
Stats 789250.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25818 bytes_read=101609 bytes_retransmit=9 bytes_invalid=0 send_seq=2155 receive_seq=2155 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993351 heater_bed: target=80 temp=78.7 pwm=0.548 sd_pos=13787 sysload=0.18 cputime=17.668 memavail=7297716 print_time=782.554 buffer_time=0.101 print_stall=0 extruder: target=250 temp=249.8 pwm=0.358
Stats 789251.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25915 bytes_read=101751 bytes_retransmit=9 bytes_invalid=0 send_seq=2161 receive_seq=2161 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993345 heater_bed: target=80 temp=78.8 pwm=0.620 sd_pos=13787 sysload=0.18 cputime=17.694 memavail=7297472 print_time=783.552 buffer_time=0.098 print_stall=0 extruder: target=250 temp=249.9 pwm=0.296
Stats 789252.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=25953 bytes_read=101878 bytes_retransmit=9 bytes_invalid=0 send_seq=2164 receive_seq=2164 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993337 heater_bed: target=80 temp=78.9 pwm=0.620 sd_pos=13787 sysload=0.16 cputime=17.716 memavail=7297472 print_time=784.555 buffer_time=0.101 print_stall=0 extruder: target=250 temp=250.0 pwm=0.292
Stats 789253.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=26007 bytes_read=102011 bytes_retransmit=9 bytes_invalid=0 send_seq=2168 receive_seq=2168 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993329 heater_bed: target=80 temp=79.0 pwm=0.543 sd_pos=13787 sysload=0.16 cputime=17.738 memavail=7297472 print_time=785.555 buffer_time=0.100 print_stall=0 extruder: target=250 temp=250.3 pwm=0.140
Stats 789254.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27236 bytes_read=102787 bytes_retransmit=9 bytes_invalid=0 send_seq=2216 receive_seq=2216 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993319 heater_bed: target=80 temp=79.1 pwm=0.608 sd_pos=13787 sysload=0.16 cputime=17.831 memavail=7297472 print_time=787.234 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.438
TMC 'extruder' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z1' reports GSTAT:      00000001 reset=1(Reset)
TMC 'extruder' reports GSTAT:      00000000
TMC 'stepper_z' reports GSTAT:      00000000
TMC 'stepper_z1' reports GSTAT:      00000000
TMC 'stepper_x' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_x' reports GSTAT:      00000000
Stats 789255.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=28429 bytes_read=104108 bytes_retransmit=9 bytes_invalid=0 send_seq=2288 receive_seq=2288 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993316 heater_bed: target=80 temp=79.1 pwm=0.608 sd_pos=13787 sysload=0.16 cputime=18.003 memavail=7298036 print_time=787.634 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.089
Stats 789256.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=28915 bytes_read=104667 bytes_retransmit=9 bytes_invalid=0 send_seq=2324 receive_seq=2324 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993304 heater_bed: target=80 temp=79.3 pwm=0.508 sd_pos=13787 sysload=0.16 cputime=18.104 memavail=7297812 print_time=788.634 buffer_time=0.000 print_stall=0 extruder: target=250 temp=240.6 pwm=1.000
TMC 'stepper_y' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 789257.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=30711 bytes_read=106125 bytes_retransmit=9 bytes_invalid=0 send_seq=2412 receive_seq=2412 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993301 heater_bed: target=80 temp=79.3 pwm=0.586 sd_pos=13787 sysload=0.15 cputime=18.267 memavail=7297572 print_time=790.490 buffer_time=1.033 print_stall=0 extruder: target=250 temp=250.2 pwm=0.000
Stats 789258.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=30890 bytes_read=106458 bytes_retransmit=9 bytes_invalid=0 send_seq=2423 receive_seq=2423 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993301 heater_bed: target=80 temp=79.4 pwm=0.433 sd_pos=13787 sysload=0.15 cputime=18.317 memavail=7297572 print_time=790.490 buffer_time=0.032 print_stall=0 extruder: target=250 temp=250.1 pwm=0.186
Stats 789259.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=31287 bytes_read=107011 bytes_retransmit=9 bytes_invalid=0 send_seq=2449 receive_seq=2449 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=37 freq=119993290 heater_bed: target=80 temp=79.6 pwm=0.414 sd_pos=13787 sysload=0.15 cputime=18.370 memavail=7297108 print_time=792.425 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.4 pwm=0.534
Stats 789260.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=31776 bytes_read=107418 bytes_retransmit=9 bytes_invalid=0 send_seq=2472 receive_seq=2472 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993284 heater_bed: target=80 temp=79.6 pwm=0.533 sd_pos=13787 sysload=0.15 cputime=18.432 memavail=7296856 print_time=792.625 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.4 pwm=0.416
Stats 789261.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=32458 bytes_read=108026 bytes_retransmit=9 bytes_invalid=0 send_seq=2510 receive_seq=2510 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993291 heater_bed: target=80 temp=79.7 pwm=0.533 sd_pos=13787 sysload=0.15 cputime=18.500 memavail=7296384 print_time=793.625 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.0 pwm=0.563
Stats 789262.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=33210 bytes_read=108693 bytes_retransmit=9 bytes_invalid=0 send_seq=2551 receive_seq=2551 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993291 heater_bed: target=80 temp=79.7 pwm=0.652 sd_pos=13787 sysload=0.14 cputime=18.585 memavail=7296384 print_time=794.625 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.142
Stats 789263.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=34154 bytes_read=109322 bytes_retransmit=9 bytes_invalid=0 send_seq=2592 receive_seq=2592 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993287 heater_bed: target=80 temp=79.7 pwm=0.685 sd_pos=13787 sysload=0.14 cputime=18.677 memavail=7296384 print_time=795.661 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.206
Stats 789264.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=34992 bytes_read=109998 bytes_retransmit=9 bytes_invalid=0 send_seq=2634 receive_seq=2634 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993280 heater_bed: target=80 temp=79.7 pwm=0.641 sd_pos=13787 sysload=0.14 cputime=18.749 memavail=7296384 print_time=796.406 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.114
Stats 789265.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=36338 bytes_read=110628 bytes_retransmit=9 bytes_invalid=0 send_seq=2675 receive_seq=2675 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993281 heater_bed: target=80 temp=79.8 pwm=0.645 sd_pos=13787 sysload=0.14 cputime=18.827 memavail=7296388 print_time=799.057 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.216
Stats 789266.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=36540 bytes_read=110976 bytes_retransmit=9 bytes_invalid=0 send_seq=2689 receive_seq=2689 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=119993281 heater_bed: target=80 temp=79.8 pwm=0.653 sd_pos=13787 sysload=0.14 cputime=18.882 memavail=7295924 print_time=799.057 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.5 pwm=0.135
Stats 789267.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=37160 bytes_read=111494 bytes_retransmit=9 bytes_invalid=0 send_seq=2720 receive_seq=2720 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993329 heater_bed: target=80 temp=79.9 pwm=0.567 sd_pos=13787 sysload=0.21 cputime=18.947 memavail=7295924 print_time=799.657 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.6 pwm=0.125
probe at 5.000,110.000 is z=1.697500
Stats 789268.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=38373 bytes_read=112138 bytes_retransmit=9 bytes_invalid=0 send_seq=2761 receive_seq=2761 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993323 heater_bed: target=80 temp=79.9 pwm=0.557 sd_pos=13787 sysload=0.21 cputime=19.035 memavail=7295924 print_time=801.022 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.284
Stats 789269.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=38982 bytes_read=112631 bytes_retransmit=9 bytes_invalid=0 send_seq=2790 receive_seq=2790 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993313 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=13787 sysload=0.21 cputime=19.104 memavail=7295672 print_time=801.672 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.348
probe at 215.000,110.000 is z=1.520000
Calculating bed tilt with: [[5.000000000040643, 110.0000000000091, 1.6975000000001526], [214.9999999999136, 110.0000000000091, 1.5200000000003135]]
Coordinate descent initial error: 0.05565624999983975
Coordinate descent best_err: 6.402701439178119e-11  rounds: 213
Calculated bed tilt parameters: {'x_adjust': -0.0008452725213655304, 'y_adjust': 0.002363675065491152, 'z_adjust': 1.441721367315422}
Making the following Z adjustments:
stepper_z = 0.017641
stepper_z1 = -0.262989
Retries: 0/10 Probed points range: 0.177500 tolerance: 0.020000
Stats 789270.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=40397 bytes_read=113280 bytes_retransmit=9 bytes_invalid=0 send_seq=2835 receive_seq=2835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993308 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=13787 sysload=0.21 cputime=19.204 memavail=7295420 print_time=803.166 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.333
Stats 789271.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=40942 bytes_read=113768 bytes_retransmit=9 bytes_invalid=0 send_seq=2860 receive_seq=2860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993340 heater_bed: target=80 temp=80.1 pwm=0.594 sd_pos=13787 sysload=0.21 cputime=19.275 memavail=7295420 print_time=803.666 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.123
probe at 5.000,110.000 is z=1.737989
Stats 789272.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=42235 bytes_read=114446 bytes_retransmit=9 bytes_invalid=0 send_seq=2905 receive_seq=2905 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993334 heater_bed: target=80 temp=80.2 pwm=0.477 sd_pos=13787 sysload=0.35 cputime=19.375 memavail=7295420 print_time=805.177 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.414
Stats 789273.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=42757 bytes_read=114910 bytes_retransmit=9 bytes_invalid=0 send_seq=2931 receive_seq=2931 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993355 heater_bed: target=80 temp=80.2 pwm=0.477 sd_pos=13787 sysload=0.35 cputime=19.435 memavail=7295420 print_time=805.627 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.296
probe at 215.000,110.000 is z=1.742989
Calculating bed tilt with: [[5.000000000040615, 110.0000000000091, 1.7379890358790573], [214.99999999991357, 110.0000000000091, 1.7429890358792122]]
Coordinate descent initial error: 0.00019341687701754747
Coordinate descent best_err: 8.300325411501313e-11  rounds: 196
Calculated bed tilt parameters: {'x_adjust': 2.3762078803319044e-05, 'y_adjust': 3.969912392629268e-05, 'z_adjust': 1.7335042189692507}
Making the following Z adjustments:
stepper_z = -0.013451
stepper_z1 = -0.005562
Retries: 1/10 Probed points range: 0.005000 tolerance: 0.020000
Stats 789274.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=43700 bytes_read=115558 bytes_retransmit=9 bytes_invalid=0 send_seq=2970 receive_seq=2970 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=8 freq=119993349 heater_bed: target=80 temp=80.3 pwm=0.421 sd_pos=13787 sysload=0.35 cputime=19.515 memavail=7295420 print_time=806.541 buffer_time=0.074 print_stall=0 extruder: target=250 temp=249.8 pwm=0.428
Algorithm: lagrange.
Default probe count: 7,5.
Adapted probe count: 3,4.
Default mesh bounds: (27.0, 5.0), (240.0, 200.0).
Mesh margin is 0, margin not increased.
Fuzz amount is 0, mesh points not fuzzed.
Adapted mesh bounds: (82.246, 42.2), (137.935, 177.675).
KAMP adjustments successful. Happy KAMPing!
Generating new points...
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (55.2, 47.2)    | (82.2, 42.2)
  1   | (83.1, 47.2)    | (110.1, 42.2)
  2   | (110.9, 47.2)   | (137.9, 42.2)
  3   | (110.9, 92.3)   | (137.9, 87.3)
  4   | (83.1, 92.3)    | (110.1, 87.3)
  5   | (55.2, 92.3)    | (82.2, 87.3)
  6   | (55.2, 137.5)   | (82.2, 132.5)
  7   | (83.1, 137.5)   | (110.1, 132.5)
  8   | (110.9, 137.5)  | (137.9, 132.5)
  9   | (110.9, 182.7)  | (137.9, 177.7)
  10  | (83.1, 182.7)   | (110.1, 177.7)
  11  | (55.2, 182.7)   | (82.2, 177.7)
Updated Mesh Configuration:
relative_reference_index: None
x_count: 3
y_count: 4
mesh_x_pps: 2
mesh_y_pps: 2
algo: lagrange
tension: 0.2
Stats 789275.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=44622 bytes_read=116124 bytes_retransmit=9 bytes_invalid=0 send_seq=3004 receive_seq=3004 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=26 freq=119993351 heater_bed: target=80 temp=80.3 pwm=0.472 sd_pos=13787 sysload=0.35 cputime=19.619 memavail=7295196 print_time=809.379 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.290
Stats 789276.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=44863 bytes_read=116467 bytes_retransmit=9 bytes_invalid=0 send_seq=3017 receive_seq=3017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993391 heater_bed: target=80 temp=80.3 pwm=0.488 sd_pos=13787 sysload=0.35 cputime=19.672 memavail=7295196 print_time=809.379 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.181
Stats 789277.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=45374 bytes_read=116937 bytes_retransmit=9 bytes_invalid=0 send_seq=3042 receive_seq=3041 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993380 heater_bed: target=80 temp=80.4 pwm=0.463 sd_pos=13787 sysload=0.32 cputime=19.736 memavail=7295196 print_time=809.679 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.311
probe at 55.250,47.200 is z=1.689701
Stats 789278.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=46536 bytes_read=117619 bytes_retransmit=9 bytes_invalid=0 send_seq=3087 receive_seq=3087 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993368 heater_bed: target=80 temp=80.4 pwm=0.463 sd_pos=13787 sysload=0.32 cputime=19.821 memavail=7295196 print_time=810.940 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.305
Stats 789279.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=47199 bytes_read=118136 bytes_retransmit=9 bytes_invalid=0 send_seq=3118 receive_seq=3118 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993359 heater_bed: target=80 temp=80.4 pwm=0.444 sd_pos=13787 sysload=0.32 cputime=19.881 memavail=7294956 print_time=811.640 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.267
probe at 83.088,47.200 is z=1.700951
Stats 789280.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=48319 bytes_read=118756 bytes_retransmit=9 bytes_invalid=0 send_seq=3157 receive_seq=3157 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993379 heater_bed: target=80 temp=80.5 pwm=0.444 sd_pos=13787 sysload=0.32 cputime=19.965 memavail=7294484 print_time=812.652 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.6 pwm=1.000
probe at 110.925,47.200 is z=1.733451
Stats 789281.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=49552 bytes_read=119481 bytes_retransmit=9 bytes_invalid=0 send_seq=3206 receive_seq=3206 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993364 heater_bed: target=80 temp=80.5 pwm=0.444 sd_pos=13787 sysload=0.32 cputime=20.059 memavail=7294488 print_time=814.131 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.3 pwm=0.390
Stats 789282.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=50131 bytes_read=119960 bytes_retransmit=9 bytes_invalid=0 send_seq=3233 receive_seq=3232 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993353 heater_bed: target=80 temp=80.5 pwm=0.429 sd_pos=13787 sysload=0.30 cputime=20.122 memavail=7294488 print_time=814.681 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.5 pwm=0.000
probe at 110.925,92.350 is z=1.809701
Stats 789283.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=51207 bytes_read=120618 bytes_retransmit=9 bytes_invalid=0 send_seq=3273 receive_seq=3273 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993340 heater_bed: target=80 temp=80.5 pwm=0.579 sd_pos=13787 sysload=0.30 cputime=20.203 memavail=7294488 print_time=815.656 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.176
probe at 83.088,92.350 is z=1.694701
Stats 789284.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=52572 bytes_read=121353 bytes_retransmit=9 bytes_invalid=0 send_seq=3324 receive_seq=3324 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993328 heater_bed: target=80 temp=80.5 pwm=0.579 sd_pos=13787 sysload=0.30 cputime=20.303 memavail=7294240 print_time=817.231 buffer_time=0.000 print_stall=0 extruder: target=250 temp=251.2 pwm=0.000
Stats 789285.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=53093 bytes_read=121793 bytes_retransmit=9 bytes_invalid=0 send_seq=3348 receive_seq=3348 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993373 heater_bed: target=80 temp=80.5 pwm=0.524 sd_pos=13787 sysload=0.30 cputime=20.368 memavail=7294244 print_time=817.681 buffer_time=0.000 print_stall=0 extruder: target=250 temp=251.0 pwm=0.103
probe at 55.250,92.350 is z=1.637201
Stats 789286.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=54173 bytes_read=122465 bytes_retransmit=9 bytes_invalid=0 send_seq=3389 receive_seq=3389 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993365 heater_bed: target=80 temp=80.5 pwm=0.433 sd_pos=13787 sysload=0.30 cputime=20.439 memavail=7293240 print_time=818.892 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.410
Stats 789287.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=54831 bytes_read=122997 bytes_retransmit=9 bytes_invalid=0 send_seq=3420 receive_seq=3420 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993357 heater_bed: target=80 temp=80.6 pwm=0.365 sd_pos=13787 sysload=0.27 cputime=20.506 memavail=7293492 print_time=819.642 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.444
probe at 55.250,137.500 is z=1.690951
Stats 789288.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=55981 bytes_read=123602 bytes_retransmit=9 bytes_invalid=0 send_seq=3459 receive_seq=3459 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993350 heater_bed: target=80 temp=80.6 pwm=0.464 sd_pos=13787 sysload=0.27 cputime=20.569 memavail=7293492 print_time=820.652 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.384
probe at 83.088,137.500 is z=1.719701
Stats 789289.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=57238 bytes_read=124332 bytes_retransmit=9 bytes_invalid=0 send_seq=3506 receive_seq=3506 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993374 heater_bed: target=80 temp=80.6 pwm=0.488 sd_pos=13787 sysload=0.27 cputime=20.657 memavail=7293492 print_time=822.004 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.116
Stats 789290.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=57847 bytes_read=124824 bytes_retransmit=9 bytes_invalid=0 send_seq=3535 receive_seq=3535 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993367 heater_bed: target=80 temp=80.6 pwm=0.488 sd_pos=13787 sysload=0.27 cputime=20.722 memavail=7293240 print_time=822.654 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.353
probe at 110.925,137.500 is z=1.843451
Stats 789291.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=58887 bytes_read=125429 bytes_retransmit=9 bytes_invalid=0 send_seq=3573 receive_seq=3573 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119993362 heater_bed: target=80 temp=80.6 pwm=0.410 sd_pos=13787 sysload=0.27 cputime=20.805 memavail=7293020 print_time=823.679 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.363
probe at 110.925,182.650 is z=1.835951
Stats 789292.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=60299 bytes_read=126186 bytes_retransmit=9 bytes_invalid=0 send_seq=3626 receive_seq=3626 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993351 heater_bed: target=80 temp=80.6 pwm=0.443 sd_pos=13787 sysload=0.33 cputime=20.897 memavail=7293020 print_time=825.146 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.296
Stats 789293.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=60867 bytes_read=126649 bytes_retransmit=9 bytes_invalid=0 send_seq=3652 receive_seq=3652 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993342 heater_bed: target=80 temp=80.6 pwm=0.502 sd_pos=13787 sysload=0.33 cputime=20.951 memavail=7296844 print_time=825.646 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.6 pwm=0.091
probe at 83.088,182.650 is z=1.724701
Stats 789294.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=61940 bytes_read=127288 bytes_retransmit=9 bytes_invalid=0 send_seq=3692 receive_seq=3692 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993331 heater_bed: target=80 temp=80.6 pwm=0.446 sd_pos=13787 sysload=0.33 cputime=21.035 memavail=7296844 print_time=826.700 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.6 pwm=0.188
probe at 55.250,182.650 is z=1.645951
Mesh Bed Leveling Complete
save_config: set [bed_mesh default] version = 1
save_config: set [bed_mesh default] points = 
  -0.060299, -0.049049, -0.016549
  -0.112799, -0.055299, 0.059701
  -0.059049, -0.030299, 0.093451
  -0.104049, -0.025299, 0.085951
save_config: set [bed_mesh default] x_count = 3
save_config: set [bed_mesh default] y_count = 4
save_config: set [bed_mesh default] mesh_x_pps = 2
save_config: set [bed_mesh default] mesh_y_pps = 2
save_config: set [bed_mesh default] algo = lagrange
save_config: set [bed_mesh default] tension = 0.2
save_config: set [bed_mesh default] min_x = 82.25
save_config: set [bed_mesh default] max_x = 137.93
save_config: set [bed_mesh default] min_y = 42.2
save_config: set [bed_mesh default] max_y = 177.65
Bed Mesh state has been saved to profile [default]
for the current session.  The SAVE_CONFIG command will
update the printer config file and restart the printer.
Stats 789295.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=63126 bytes_read=128022 bytes_retransmit=9 bytes_invalid=0 send_seq=3740 receive_seq=3740 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=8 freq=119993323 heater_bed: target=80 temp=80.6 pwm=0.471 sd_pos=13787 sysload=0.33 cputime=21.149 memavail=7296604 print_time=828.062 buffer_time=0.579 print_stall=0 extruder: target=250 temp=249.8 pwm=0.506
Stats 789296.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=63396 bytes_read=128375 bytes_retransmit=9 bytes_invalid=0 send_seq=3755 receive_seq=3755 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993317 heater_bed: target=80 temp=80.7 pwm=0.378 sd_pos=13787 sysload=0.33 cputime=21.199 memavail=7296384 print_time=828.062 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.416
Moving filament tip 0.0mms
KAMP purge is using firmware retraction.
KAMP purge starting at 95.09049999999999, 32.2 and purging 30.0mm of filament, requested flow rate is 12.0mm/s3.
Hyperlapse: frames started (Cycle 30 sec)
Pausing toolhead to calculate extruder phase offset
Stats 789297.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=66546 bytes_read=129146 bytes_retransmit=9 bytes_invalid=0 send_seq=3824 receive_seq=3824 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993310 heater_bed: target=80 temp=80.7 pwm=0.351 sd_pos=13819 sysload=0.39 cputime=21.322 memavail=7295544 print_time=842.732 buffer_time=13.249 print_stall=0 extruder: target=250 temp=250.2 pwm=0.149
Stats 789298.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=66788 bytes_read=129523 bytes_retransmit=9 bytes_invalid=0 send_seq=3841 receive_seq=3841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993353 heater_bed: target=80 temp=80.7 pwm=0.475 sd_pos=13819 sysload=0.39 cputime=21.389 memavail=7295068 print_time=842.732 buffer_time=12.249 print_stall=0 extruder: target=250 temp=249.0 pwm=0.526
Stats 789299.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=67014 bytes_read=129881 bytes_retransmit=9 bytes_invalid=0 send_seq=3857 receive_seq=3857 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993353 heater_bed: target=80 temp=80.7 pwm=0.570 sd_pos=13819 sysload=0.39 cputime=21.448 memavail=7295068 print_time=842.732 buffer_time=11.247 print_stall=0 extruder: target=250 temp=249.3 pwm=0.382
Stats 789300.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=67219 bytes_read=130244 bytes_retransmit=9 bytes_invalid=0 send_seq=3871 receive_seq=3871 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993345 heater_bed: target=80 temp=80.7 pwm=0.389 sd_pos=13819 sysload=0.39 cputime=21.515 memavail=7294000 print_time=842.732 buffer_time=10.247 print_stall=0 extruder: target=250 temp=249.4 pwm=0.343
Stats 789301.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=67429 bytes_read=130611 bytes_retransmit=9 bytes_invalid=0 send_seq=3886 receive_seq=3886 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993334 heater_bed: target=80 temp=80.7 pwm=0.312 sd_pos=13819 sysload=0.39 cputime=21.572 memavail=7294376 print_time=842.732 buffer_time=9.246 print_stall=0 extruder: target=250 temp=249.1 pwm=0.541
Stats 789302.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=67687 bytes_read=130994 bytes_retransmit=9 bytes_invalid=0 send_seq=3904 receive_seq=3904 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993329 heater_bed: target=80 temp=80.7 pwm=0.434 sd_pos=13819 sysload=0.43 cputime=21.630 memavail=7294136 print_time=842.732 buffer_time=8.246 print_stall=0 extruder: target=250 temp=249.5 pwm=0.308
Stats 789303.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=67899 bytes_read=131357 bytes_retransmit=9 bytes_invalid=0 send_seq=3918 receive_seq=3918 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993329 heater_bed: target=80 temp=80.7 pwm=0.443 sd_pos=13819 sysload=0.43 cputime=21.700 memavail=7293888 print_time=842.732 buffer_time=7.245 print_stall=0 extruder: target=250 temp=250.6 pwm=0.000
Stats 789304.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=68109 bytes_read=131724 bytes_retransmit=9 bytes_invalid=0 send_seq=3933 receive_seq=3933 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993318 heater_bed: target=80 temp=80.8 pwm=0.368 sd_pos=13819 sysload=0.43 cputime=21.759 memavail=7294448 print_time=842.732 buffer_time=6.245 print_stall=0 extruder: target=250 temp=250.3 pwm=0.288
Stats 789305.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=68319 bytes_read=132077 bytes_retransmit=9 bytes_invalid=0 send_seq=3948 receive_seq=3948 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993307 heater_bed: target=80 temp=80.7 pwm=0.440 sd_pos=13819 sysload=0.43 cputime=21.814 memavail=7295444 print_time=842.732 buffer_time=5.245 print_stall=0 extruder: target=250 temp=250.3 pwm=0.231
Stats 789306.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=68520 bytes_read=132440 bytes_retransmit=9 bytes_invalid=0 send_seq=3962 receive_seq=3962 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993302 heater_bed: target=80 temp=80.7 pwm=0.451 sd_pos=13819 sysload=0.43 cputime=21.888 memavail=7295196 print_time=842.732 buffer_time=4.244 print_stall=0 extruder: target=250 temp=251.0 pwm=0.052
Stats 789307.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=68714 bytes_read=132817 bytes_retransmit=9 bytes_invalid=0 send_seq=3976 receive_seq=3976 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993294 heater_bed: target=80 temp=80.7 pwm=0.385 sd_pos=13819 sysload=0.40 cputime=21.959 memavail=7294720 print_time=842.732 buffer_time=3.244 print_stall=0 extruder: target=250 temp=250.3 pwm=0.366
Stats 789308.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=68887 bytes_read=133155 bytes_retransmit=9 bytes_invalid=0 send_seq=3988 receive_seq=3988 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993288 heater_bed: target=80 temp=80.7 pwm=0.463 sd_pos=13819 sysload=0.40 cputime=22.014 memavail=7294720 print_time=842.732 buffer_time=2.243 print_stall=0 extruder: target=250 temp=249.8 pwm=0.468
Stats 789309.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=69081 bytes_read=133518 bytes_retransmit=9 bytes_invalid=0 send_seq=4002 receive_seq=4002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993282 heater_bed: target=80 temp=80.7 pwm=0.450 sd_pos=13819 sysload=0.40 cputime=22.073 memavail=7294720 print_time=842.732 buffer_time=1.243 print_stall=0 extruder: target=250 temp=249.4 pwm=0.521
Stats 789310.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=69428 bytes_read=133901 bytes_retransmit=9 bytes_invalid=0 send_seq=4018 receive_seq=4018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993287 heater_bed: target=80 temp=80.7 pwm=0.450 sd_pos=13819 sysload=0.40 cputime=22.148 memavail=7294244 print_time=842.744 buffer_time=0.253 print_stall=0 extruder: target=250 temp=249.7 pwm=0.289
Stats 789311.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=72576 bytes_read=134512 bytes_retransmit=9 bytes_invalid=0 send_seq=4081 receive_seq=4081 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993287 heater_bed: target=80 temp=80.7 pwm=0.459 sd_pos=14352 sysload=0.40 cputime=22.242 memavail=7294248 print_time=845.929 buffer_time=2.437 print_stall=0 extruder: target=250 temp=249.9 pwm=0.234
Stats 789312.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=72914 bytes_read=134905 bytes_retransmit=9 bytes_invalid=0 send_seq=4098 receive_seq=4098 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993279 heater_bed: target=80 temp=80.7 pwm=0.392 sd_pos=14352 sysload=0.37 cputime=22.288 memavail=7294248 print_time=846.679 buffer_time=2.187 print_stall=0 extruder: target=250 temp=249.8 pwm=0.324
Stats 789313.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=73488 bytes_read=135307 bytes_retransmit=9 bytes_invalid=0 send_seq=4120 receive_seq=4120 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119993272 heater_bed: target=80 temp=80.6 pwm=0.439 sd_pos=14440 sysload=0.37 cputime=22.331 memavail=7294248 print_time=849.441 buffer_time=3.948 print_stall=0 extruder: target=250 temp=250.4 pwm=0.108
Stats 789314.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=73697 bytes_read=135660 bytes_retransmit=9 bytes_invalid=0 send_seq=4135 receive_seq=4135 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993266 heater_bed: target=80 temp=80.6 pwm=0.439 sd_pos=14440 sysload=0.37 cputime=22.371 memavail=7293492 print_time=849.441 buffer_time=2.948 print_stall=0 extruder: target=250 temp=250.2 pwm=0.263
Stats 789315.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=74037 bytes_read=136023 bytes_retransmit=9 bytes_invalid=0 send_seq=4149 receive_seq=4149 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993266 heater_bed: target=80 temp=80.6 pwm=0.374 sd_pos=14525 sysload=0.37 cputime=22.415 memavail=7293244 print_time=849.777 buffer_time=2.283 print_stall=0 extruder: target=250 temp=250.0 pwm=0.371
Stats 789316.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=74861 bytes_read=136430 bytes_retransmit=9 bytes_invalid=0 send_seq=4172 receive_seq=4172 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119993261 heater_bed: target=80 temp=80.6 pwm=0.331 sd_pos=14668 sysload=0.37 cputime=22.465 memavail=7293244 print_time=850.948 buffer_time=2.454 print_stall=0 extruder: target=250 temp=249.8 pwm=0.462
Stats 789317.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=75390 bytes_read=136823 bytes_retransmit=9 bytes_invalid=0 send_seq=4192 receive_seq=4192 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993261 heater_bed: target=80 temp=80.6 pwm=0.416 sd_pos=14697 sysload=0.34 cputime=22.524 memavail=7293248 print_time=852.698 buffer_time=3.204 print_stall=0 extruder: target=250 temp=250.1 pwm=0.321
Stats 789318.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=75622 bytes_read=137186 bytes_retransmit=9 bytes_invalid=0 send_seq=4206 receive_seq=4206 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993259 heater_bed: target=80 temp=80.6 pwm=0.417 sd_pos=14697 sysload=0.34 cputime=22.579 memavail=7295160 print_time=852.698 buffer_time=2.203 print_stall=0 extruder: target=250 temp=250.0 pwm=0.332
Stats 789319.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=76510 bytes_read=137608 bytes_retransmit=9 bytes_invalid=0 send_seq=4232 receive_seq=4232 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993288 heater_bed: target=80 temp=80.6 pwm=0.427 sd_pos=14863 sysload=0.34 cputime=22.638 memavail=7294936 print_time=854.175 buffer_time=2.679 print_stall=0 extruder: target=250 temp=249.9 pwm=0.383
Stats 789320.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=77668 bytes_read=138046 bytes_retransmit=9 bytes_invalid=0 send_seq=4264 receive_seq=4264 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993287 heater_bed: target=80 temp=80.5 pwm=0.595 sd_pos=15036 sysload=0.34 cputime=22.710 memavail=7294936 print_time=860.666 buffer_time=8.170 print_stall=0 extruder: target=250 temp=250.1 pwm=0.236
Stats 789321.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=77857 bytes_read=138404 bytes_retransmit=9 bytes_invalid=0 send_seq=4277 receive_seq=4277 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993286 heater_bed: target=80 temp=80.5 pwm=0.514 sd_pos=15036 sysload=0.34 cputime=22.748 memavail=7294936 print_time=860.666 buffer_time=7.170 print_stall=0 extruder: target=250 temp=250.0 pwm=0.301
Stats 789322.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=78019 bytes_read=138771 bytes_retransmit=9 bytes_invalid=0 send_seq=4289 receive_seq=4289 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993278 heater_bed: target=80 temp=80.5 pwm=0.460 sd_pos=15036 sysload=0.31 cputime=22.798 memavail=7294688 print_time=860.666 buffer_time=6.169 print_stall=0 extruder: target=250 temp=250.1 pwm=0.301
Stats 789323.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=78212 bytes_read=139119 bytes_retransmit=9 bytes_invalid=0 send_seq=4303 receive_seq=4303 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993269 heater_bed: target=80 temp=80.5 pwm=0.540 sd_pos=15036 sysload=0.31 cputime=22.842 memavail=7294464 print_time=860.666 buffer_time=5.169 print_stall=0 extruder: target=250 temp=250.0 pwm=0.372
Stats 789324.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=78407 bytes_read=139472 bytes_retransmit=9 bytes_invalid=0 send_seq=4315 receive_seq=4315 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993312 heater_bed: target=80 temp=80.4 pwm=0.527 sd_pos=15036 sysload=0.31 cputime=22.887 memavail=7294464 print_time=860.666 buffer_time=4.168 print_stall=0 extruder: target=250 temp=250.1 pwm=0.303
Stats 789325.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=78601 bytes_read=139834 bytes_retransmit=9 bytes_invalid=0 send_seq=4329 receive_seq=4329 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993300 heater_bed: target=80 temp=80.4 pwm=0.465 sd_pos=15036 sysload=0.31 cputime=22.928 memavail=7294240 print_time=860.666 buffer_time=3.167 print_stall=0 extruder: target=250 temp=250.1 pwm=0.353
Stats 789326.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=78811 bytes_read=140185 bytes_retransmit=9 bytes_invalid=0 send_seq=4344 receive_seq=4344 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993296 heater_bed: target=80 temp=80.4 pwm=0.519 sd_pos=15036 sysload=0.31 cputime=22.976 memavail=7294240 print_time=860.666 buffer_time=2.167 print_stall=0 extruder: target=250 temp=249.7 pwm=0.433
Stats 789327.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=80124 bytes_read=140640 bytes_retransmit=9 bytes_invalid=0 send_seq=4375 receive_seq=4375 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993298 heater_bed: target=80 temp=80.4 pwm=0.513 sd_pos=15138 sysload=0.29 cputime=23.033 memavail=7294016 print_time=861.630 buffer_time=2.130 print_stall=0 extruder: target=250 temp=249.7 pwm=0.433
Stats 789328.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=81364 bytes_read=141075 bytes_retransmit=9 bytes_invalid=0 send_seq=4405 receive_seq=4405 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993295 heater_bed: target=80 temp=80.4 pwm=0.450 sd_pos=15233 sysload=0.29 cputime=23.112 memavail=7296704 print_time=864.079 buffer_time=3.579 print_stall=0 extruder: target=250 temp=249.5 pwm=0.387
Stats 789329.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=81558 bytes_read=141423 bytes_retransmit=9 bytes_invalid=0 send_seq=4419 receive_seq=4419 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993295 heater_bed: target=80 temp=80.4 pwm=0.450 sd_pos=15233 sysload=0.29 cputime=23.158 memavail=7296240 print_time=864.079 buffer_time=2.579 print_stall=0 extruder: target=250 temp=250.3 pwm=0.154
Stats 789330.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=82347 bytes_read=141831 bytes_retransmit=9 bytes_invalid=0 send_seq=4442 receive_seq=4442 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993287 heater_bed: target=80 temp=80.4 pwm=0.257 sd_pos=15403 sysload=0.29 cputime=23.202 memavail=7295496 print_time=866.923 buffer_time=4.422 print_stall=0 extruder: target=250 temp=250.5 pwm=0.124
Stats 789331.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=82623 bytes_read=142198 bytes_retransmit=9 bytes_invalid=0 send_seq=4457 receive_seq=4457 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993279 heater_bed: target=80 temp=80.4 pwm=0.386 sd_pos=15403 sysload=0.29 cputime=23.236 memavail=7295280 print_time=866.923 buffer_time=3.421 print_stall=0 extruder: target=250 temp=250.4 pwm=0.296
Stats 789332.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=82849 bytes_read=142571 bytes_retransmit=9 bytes_invalid=0 send_seq=4473 receive_seq=4473 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993272 heater_bed: target=80 temp=80.5 pwm=0.291 sd_pos=15403 sysload=0.26 cputime=23.273 memavail=7294804 print_time=866.923 buffer_time=2.420 print_stall=0 extruder: target=250 temp=249.9 pwm=0.526
Stats 789333.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=83162 bytes_read=142929 bytes_retransmit=9 bytes_invalid=0 send_seq=4486 receive_seq=4486 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993267 heater_bed: target=80 temp=80.5 pwm=0.291 sd_pos=15431 sysload=0.26 cputime=23.327 memavail=7294808 print_time=868.472 buffer_time=2.969 print_stall=0 extruder: target=250 temp=250.0 pwm=0.368
Stats 789334.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=83574 bytes_read=143301 bytes_retransmit=9 bytes_invalid=0 send_seq=4502 receive_seq=4502 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993263 heater_bed: target=80 temp=80.5 pwm=0.291 sd_pos=15431 sysload=0.26 cputime=23.372 memavail=7294808 print_time=869.404 buffer_time=2.901 print_stall=0 extruder: target=250 temp=249.9 pwm=0.403
Stats 789335.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=84104 bytes_read=143669 bytes_retransmit=9 bytes_invalid=0 send_seq=4520 receive_seq=4520 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993259 heater_bed: target=80 temp=80.6 pwm=0.260 sd_pos=15431 sysload=0.26 cputime=23.418 memavail=7295268 print_time=870.161 buffer_time=2.657 print_stall=0 extruder: target=250 temp=250.0 pwm=0.289
Stats 789336.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=84413 bytes_read=144032 bytes_retransmit=9 bytes_invalid=0 send_seq=4534 receive_seq=4534 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993258 heater_bed: target=80 temp=80.6 pwm=0.375 sd_pos=15431 sysload=0.26 cputime=23.469 memavail=7295332 print_time=871.161 buffer_time=2.656 print_stall=0 extruder: target=250 temp=250.2 pwm=0.294
Stats 789337.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=84945 bytes_read=144444 bytes_retransmit=9 bytes_invalid=0 send_seq=4555 receive_seq=4555 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993284 heater_bed: target=80 temp=80.6 pwm=0.278 sd_pos=15538 sysload=0.24 cputime=23.526 memavail=7295332 print_time=873.625 buffer_time=4.119 print_stall=0 extruder: target=250 temp=250.1 pwm=0.331
Stats 789338.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=85170 bytes_read=144802 bytes_retransmit=9 bytes_invalid=0 send_seq=4571 receive_seq=4571 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993281 heater_bed: target=80 temp=80.6 pwm=0.328 sd_pos=15538 sysload=0.24 cputime=23.572 memavail=7294844 print_time=873.625 buffer_time=3.118 print_stall=0 extruder: target=250 temp=250.4 pwm=0.239
Stats 789339.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=85354 bytes_read=145155 bytes_retransmit=9 bytes_invalid=0 send_seq=4583 receive_seq=4583 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993278 heater_bed: target=80 temp=80.6 pwm=0.337 sd_pos=15538 sysload=0.24 cputime=23.619 memavail=7294088 print_time=873.625 buffer_time=2.118 print_stall=0 extruder: target=250 temp=250.1 pwm=0.365
Stats 789340.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=86419 bytes_read=145582 bytes_retransmit=9 bytes_invalid=0 send_seq=4610 receive_seq=4610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993278 heater_bed: target=80 temp=80.6 pwm=0.337 sd_pos=15768 sysload=0.24 cputime=23.675 memavail=7293836 print_time=875.015 buffer_time=2.508 print_stall=0 extruder: target=250 temp=249.8 pwm=0.463
Stats 789341.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=86801 bytes_read=145935 bytes_retransmit=9 bytes_invalid=0 send_seq=4625 receive_seq=4625 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993279 heater_bed: target=80 temp=80.6 pwm=0.336 sd_pos=15878 sysload=0.24 cputime=23.733 memavail=7293612 print_time=875.976 buffer_time=2.469 print_stall=0 extruder: target=250 temp=249.7 pwm=0.437
Stats 789342.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=87839 bytes_read=146373 bytes_retransmit=9 bytes_invalid=0 send_seq=4651 receive_seq=4651 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993276 heater_bed: target=80 temp=80.6 pwm=0.400 sd_pos=15977 sysload=0.22 cputime=23.797 memavail=7293612 print_time=878.493 buffer_time=3.985 print_stall=0 extruder: target=250 temp=249.9 pwm=0.288
Stats 789343.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=88017 bytes_read=146730 bytes_retransmit=9 bytes_invalid=0 send_seq=4664 receive_seq=4664 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993270 heater_bed: target=80 temp=80.6 pwm=0.400 sd_pos=15977 sysload=0.22 cputime=23.848 memavail=7293612 print_time=878.493 buffer_time=2.984 print_stall=0 extruder: target=250 temp=249.9 pwm=0.358
Stats 789344.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=88408 bytes_read=147098 bytes_retransmit=9 bytes_invalid=0 send_seq=4682 receive_seq=4682 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119993267 heater_bed: target=80 temp=80.5 pwm=0.469 sd_pos=16091 sysload=0.22 cputime=23.900 memavail=7293612 print_time=878.690 buffer_time=2.178 print_stall=0 extruder: target=250 temp=250.0 pwm=0.253
Stats 789345.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=88980 bytes_read=147481 bytes_retransmit=9 bytes_invalid=0 send_seq=4700 receive_seq=4700 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993265 heater_bed: target=80 temp=80.5 pwm=0.374 sd_pos=16147 sysload=0.22 cputime=23.953 memavail=7293612 print_time=881.317 buffer_time=3.804 print_stall=0 extruder: target=250 temp=250.1 pwm=0.253
Stats 789346.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=89206 bytes_read=147853 bytes_retransmit=9 bytes_invalid=0 send_seq=4716 receive_seq=4716 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993291 heater_bed: target=80 temp=80.5 pwm=0.483 sd_pos=16147 sysload=0.22 cputime=24.003 memavail=7293612 print_time=881.317 buffer_time=2.804 print_stall=0 extruder: target=250 temp=250.0 pwm=0.382
Stats 789347.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=89520 bytes_read=148221 bytes_retransmit=9 bytes_invalid=0 send_seq=4731 receive_seq=4731 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119993289 heater_bed: target=80 temp=80.5 pwm=0.436 sd_pos=16173 sysload=0.20 cputime=24.049 memavail=7293372 print_time=882.892 buffer_time=3.378 print_stall=0 extruder: target=250 temp=250.0 pwm=0.325
Stats 789348.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=89759 bytes_read=148579 bytes_retransmit=9 bytes_invalid=0 send_seq=4744 receive_seq=4744 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993283 heater_bed: target=80 temp=80.4 pwm=0.553 sd_pos=16173 sysload=0.20 cputime=24.095 memavail=7293372 print_time=882.892 buffer_time=2.378 print_stall=0 extruder: target=250 temp=249.9 pwm=0.338
Stats 789349.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=90254 bytes_read=148966 bytes_retransmit=9 bytes_invalid=0 send_seq=4763 receive_seq=4763 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993277 heater_bed: target=80 temp=80.4 pwm=0.471 sd_pos=16173 sysload=0.20 cputime=24.145 memavail=7293148 print_time=883.876 buffer_time=2.361 print_stall=0 extruder: target=250 temp=249.9 pwm=0.315
Stats 789350.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=90735 bytes_read=149324 bytes_retransmit=9 bytes_invalid=0 send_seq=4779 receive_seq=4779 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993274 heater_bed: target=80 temp=80.4 pwm=0.459 sd_pos=16173 sysload=0.20 cputime=24.198 memavail=7295916 print_time=884.633 buffer_time=2.118 print_stall=0 extruder: target=250 temp=249.7 pwm=0.419
Stats 789351.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=91321 bytes_read=149707 bytes_retransmit=9 bytes_invalid=0 send_seq=4797 receive_seq=4797 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119993276 heater_bed: target=80 temp=80.3 pwm=0.423 sd_pos=16261 sysload=0.20 cputime=24.257 memavail=7295764 print_time=888.124 buffer_time=4.608 print_stall=0 extruder: target=250 temp=249.9 pwm=0.345
Stats 789352.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=91578 bytes_read=150099 bytes_retransmit=9 bytes_invalid=0 send_seq=4814 receive_seq=4814 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993272 heater_bed: target=80 temp=80.3 pwm=0.508 sd_pos=16261 sysload=0.19 cputime=24.310 memavail=7296020 print_time=888.124 buffer_time=3.608 print_stall=0 extruder: target=250 temp=250.0 pwm=0.330
Stats 789353.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=91740 bytes_read=150437 bytes_retransmit=9 bytes_invalid=0 send_seq=4826 receive_seq=4826 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993269 heater_bed: target=80 temp=80.3 pwm=0.508 sd_pos=16261 sysload=0.19 cputime=24.355 memavail=7296020 print_time=888.124 buffer_time=2.608 print_stall=0 extruder: target=250 temp=250.3 pwm=0.218
Stats 789354.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=92419 bytes_read=150835 bytes_retransmit=9 bytes_invalid=0 send_seq=4847 receive_seq=4847 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119993268 heater_bed: target=80 temp=80.3 pwm=0.399 sd_pos=16434 sysload=0.19 cputime=24.409 memavail=7295024 print_time=888.729 buffer_time=2.212 print_stall=0 extruder: target=250 temp=250.0 pwm=0.409
Stats 789355.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=93090 bytes_read=151227 bytes_retransmit=9 bytes_invalid=0 send_seq=4867 receive_seq=4867 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993268 heater_bed: target=80 temp=80.3 pwm=0.462 sd_pos=16491 sysload=0.19 cputime=24.468 memavail=7295024 print_time=889.532 buffer_time=2.014 print_stall=0 extruder: target=250 temp=249.7 pwm=0.484
Stats 789356.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=93665 bytes_read=151595 bytes_retransmit=9 bytes_invalid=0 send_seq=4885 receive_seq=4885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993265 heater_bed: target=80 temp=80.2 pwm=0.462 sd_pos=16586 sysload=0.19 cputime=24.522 memavail=7294800 print_time=890.619 buffer_time=2.101 print_stall=0 extruder: target=250 temp=250.0 pwm=0.295
Stats 789357.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=95722 bytes_read=152118 bytes_retransmit=9 bytes_invalid=0 send_seq=4928 receive_seq=4928 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993262 heater_bed: target=80 temp=80.2 pwm=0.373 sd_pos=16774 sysload=0.17 cputime=24.588 memavail=7295056 print_time=891.757 buffer_time=2.238 print_stall=0 extruder: target=250 temp=250.0 pwm=0.290
Stats 789358.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=97816 bytes_read=152635 bytes_retransmit=9 bytes_invalid=0 send_seq=4973 receive_seq=4973 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993268 heater_bed: target=80 temp=80.3 pwm=0.333 sd_pos=16961 sysload=0.17 cputime=24.685 memavail=7294024 print_time=892.627 buffer_time=2.108 print_stall=0 extruder: target=250 temp=250.0 pwm=0.273
Stats 789359.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=99468 bytes_read=153098 bytes_retransmit=9 bytes_invalid=0 send_seq=5010 receive_seq=5010 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993260 heater_bed: target=80 temp=80.2 pwm=0.417 sd_pos=17125 sysload=0.17 cputime=24.750 memavail=7294764 print_time=893.857 buffer_time=2.336 print_stall=0 extruder: target=250 temp=249.7 pwm=0.422
Stats 789360.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=100624 bytes_read=153526 bytes_retransmit=9 bytes_invalid=0 send_seq=5037 receive_seq=5037 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119993292 heater_bed: target=80 temp=80.3 pwm=0.311 sd_pos=17233 sysload=0.17 cputime=24.820 memavail=7294276 print_time=894.934 buffer_time=2.412 print_stall=0 extruder: target=250 temp=250.5 pwm=0.073
Stats 789361.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=101413 bytes_read=153928 bytes_retransmit=9 bytes_invalid=0 send_seq=5059 receive_seq=5059 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993286 heater_bed: target=80 temp=80.3 pwm=0.391 sd_pos=17285 sysload=0.17 cputime=24.868 memavail=7294308 print_time=895.549 buffer_time=2.027 print_stall=0 extruder: target=250 temp=250.0 pwm=0.398
Stats 789362.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=102757 bytes_read=154382 bytes_retransmit=9 bytes_invalid=0 send_seq=5092 receive_seq=5092 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993285 heater_bed: target=80 temp=80.3 pwm=0.450 sd_pos=17395 sysload=0.16 cputime=24.928 memavail=7294084 print_time=896.935 buffer_time=2.411 print_stall=0 extruder: target=250 temp=250.4 pwm=0.246
Stats 789363.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=103454 bytes_read=154772 bytes_retransmit=9 bytes_invalid=0 send_seq=5113 receive_seq=5113 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993277 heater_bed: target=80 temp=80.2 pwm=0.475 sd_pos=17452 sysload=0.16 cputime=24.972 memavail=7293076 print_time=897.705 buffer_time=2.180 print_stall=0 extruder: target=250 temp=250.2 pwm=0.348
Stats 789364.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=104259 bytes_read=155178 bytes_retransmit=9 bytes_invalid=0 send_seq=5137 receive_seq=5137 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993331 heater_bed: target=80 temp=80.2 pwm=0.448 sd_pos=17516 sysload=0.16 cputime=25.026 memavail=7293592 print_time=898.526 buffer_time=2.001 print_stall=0 extruder: target=250 temp=249.7 pwm=0.538
Stats 789365.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=105592 bytes_read=155611 bytes_retransmit=9 bytes_invalid=0 send_seq=5168 receive_seq=5168 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993327 heater_bed: target=80 temp=80.2 pwm=0.510 sd_pos=17634 sysload=0.16 cputime=25.081 memavail=7293756 print_time=900.324 buffer_time=2.797 print_stall=0 extruder: target=250 temp=249.9 pwm=0.310
Stats 789366.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=106330 bytes_read=156014 bytes_retransmit=9 bytes_invalid=0 send_seq=5190 receive_seq=5190 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993323 heater_bed: target=80 temp=80.1 pwm=0.532 sd_pos=17691 sysload=0.16 cputime=25.132 memavail=7293860 print_time=901.299 buffer_time=2.771 print_stall=0 extruder: target=250 temp=250.0 pwm=0.310
Stats 789367.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=107100 bytes_read=156436 bytes_retransmit=9 bytes_invalid=0 send_seq=5213 receive_seq=5213 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993321 heater_bed: target=80 temp=80.1 pwm=0.399 sd_pos=17743 sysload=0.14 cputime=25.181 memavail=7293860 print_time=902.327 buffer_time=2.798 print_stall=0 extruder: target=250 temp=250.0 pwm=0.333
Stats 789368.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=107901 bytes_read=156829 bytes_retransmit=9 bytes_invalid=0 send_seq=5236 receive_seq=5236 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993321 heater_bed: target=80 temp=80.1 pwm=0.488 sd_pos=17799 sysload=0.14 cputime=25.228 memavail=7293860 print_time=903.405 buffer_time=2.876 print_stall=0 extruder: target=250 temp=249.8 pwm=0.404
Stats 789369.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=108750 bytes_read=157242 bytes_retransmit=9 bytes_invalid=0 send_seq=5260 receive_seq=5260 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993328 heater_bed: target=80 temp=80.0 pwm=0.576 sd_pos=17852 sysload=0.14 cputime=25.278 memavail=7293860 print_time=904.535 buffer_time=3.005 print_stall=0 extruder: target=250 temp=250.3 pwm=0.191
Stats 789370.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=108971 bytes_read=157609 bytes_retransmit=9 bytes_invalid=0 send_seq=5275 receive_seq=5275 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993320 heater_bed: target=80 temp=80.1 pwm=0.343 sd_pos=17852 sysload=0.14 cputime=25.327 memavail=7292288 print_time=904.535 buffer_time=2.004 print_stall=0 extruder: target=250 temp=250.1 pwm=0.349
Stats 789371.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=109768 bytes_read=158013 bytes_retransmit=9 bytes_invalid=0 send_seq=5298 receive_seq=5298 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993311 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=17909 sysload=0.14 cputime=25.386 memavail=7292352 print_time=905.717 buffer_time=2.185 print_stall=0 extruder: target=250 temp=250.1 pwm=0.275
Stats 789372.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=110541 bytes_read=158426 bytes_retransmit=9 bytes_invalid=0 send_seq=5319 receive_seq=5319 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993360 heater_bed: target=80 temp=80.0 pwm=0.545 sd_pos=17961 sysload=0.13 cputime=25.443 memavail=7292352 print_time=906.950 buffer_time=2.417 print_stall=0 extruder: target=250 temp=249.7 pwm=0.428
Stats 789373.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=111376 bytes_read=158838 bytes_retransmit=9 bytes_invalid=0 send_seq=5343 receive_seq=5343 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993352 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=18018 sysload=0.13 cputime=25.493 memavail=7292352 print_time=908.235 buffer_time=2.701 print_stall=0 extruder: target=250 temp=249.8 pwm=0.417
Stats 789374.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=112173 bytes_read=159231 bytes_retransmit=9 bytes_invalid=0 send_seq=5366 receive_seq=5366 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993345 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=18074 sysload=0.13 cputime=25.540 memavail=7292352 print_time=909.547 buffer_time=3.012 print_stall=0 extruder: target=250 temp=250.1 pwm=0.233
Stats 789375.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=112373 bytes_read=159589 bytes_retransmit=9 bytes_invalid=0 send_seq=5379 receive_seq=5379 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993340 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=18074 sysload=0.13 cputime=25.585 memavail=7287312 print_time=909.547 buffer_time=2.011 print_stall=0 extruder: target=250 temp=250.2 pwm=0.229
Stats 789376.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=113177 bytes_read=160006 bytes_retransmit=9 bytes_invalid=0 send_seq=5404 receive_seq=5404 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993331 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=18131 sysload=0.13 cputime=25.657 memavail=7293468 print_time=910.844 buffer_time=2.309 print_stall=0 extruder: target=250 temp=250.1 pwm=0.319
Stats 789377.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=113975 bytes_read=160414 bytes_retransmit=9 bytes_invalid=0 send_seq=5427 receive_seq=5427 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993363 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=18188 sysload=0.36 cputime=25.721 memavail=7293468 print_time=912.156 buffer_time=2.620 print_stall=0 extruder: target=250 temp=249.8 pwm=0.446
Stats 789378.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=114729 bytes_read=160812 bytes_retransmit=9 bytes_invalid=0 send_seq=5448 receive_seq=5448 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993349 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=18245 sysload=0.36 cputime=25.777 memavail=7293244 print_time=913.454 buffer_time=2.917 print_stall=0 extruder: target=250 temp=249.9 pwm=0.305
Stats 789379.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=115570 bytes_read=161229 bytes_retransmit=9 bytes_invalid=0 send_seq=5473 receive_seq=5473 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993336 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=18302 sysload=0.36 cputime=25.828 memavail=7293244 print_time=914.766 buffer_time=3.228 print_stall=0 extruder: target=250 temp=250.2 pwm=0.199
Stats 789380.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=115727 bytes_read=161562 bytes_retransmit=9 bytes_invalid=0 send_seq=5484 receive_seq=5484 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993325 heater_bed: target=80 temp=80.0 pwm=0.507 sd_pos=18302 sysload=0.36 cputime=25.867 memavail=7293020 print_time=914.766 buffer_time=2.228 print_stall=0 extruder: target=250 temp=250.3 pwm=0.199
Stats 789381.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=116524 bytes_read=161970 bytes_retransmit=9 bytes_invalid=0 send_seq=5507 receive_seq=5507 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993380 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=18359 sysload=0.36 cputime=25.929 memavail=7293020 print_time=916.064 buffer_time=2.525 print_stall=0 extruder: target=250 temp=250.1 pwm=0.362
Stats 789382.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=117354 bytes_read=162402 bytes_retransmit=9 bytes_invalid=0 send_seq=5532 receive_seq=5532 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993368 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=18416 sysload=0.41 cputime=25.985 memavail=7293020 print_time=917.376 buffer_time=2.837 print_stall=0 extruder: target=250 temp=250.0 pwm=0.332
Stats 789383.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=118068 bytes_read=162780 bytes_retransmit=9 bytes_invalid=0 send_seq=5552 receive_seq=5552 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993356 heater_bed: target=80 temp=80.0 pwm=0.321 sd_pos=18473 sysload=0.41 cputime=26.041 memavail=7293020 print_time=918.673 buffer_time=3.134 print_stall=0 extruder: target=250 temp=249.8 pwm=0.391
Stats 789384.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=118302 bytes_read=163143 bytes_retransmit=9 bytes_invalid=0 send_seq=5566 receive_seq=5566 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993345 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=18473 sysload=0.41 cputime=26.090 memavail=7295848 print_time=918.673 buffer_time=2.133 print_stall=0 extruder: target=250 temp=249.8 pwm=0.391
Stats 789385.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=119114 bytes_read=163555 bytes_retransmit=9 bytes_invalid=0 send_seq=5590 receive_seq=5590 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993363 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=18530 sysload=0.41 cputime=26.147 memavail=7295848 print_time=919.985 buffer_time=2.445 print_stall=0 extruder: target=250 temp=250.1 pwm=0.248
Stats 789386.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=119868 bytes_read=163933 bytes_retransmit=9 bytes_invalid=0 send_seq=5610 receive_seq=5610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993348 heater_bed: target=80 temp=80.0 pwm=0.391 sd_pos=18586 sysload=0.41 cputime=26.196 memavail=7295848 print_time=921.283 buffer_time=2.741 print_stall=0 extruder: target=250 temp=250.2 pwm=0.248
Stats 789387.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=120730 bytes_read=164361 bytes_retransmit=9 bytes_invalid=0 send_seq=5634 receive_seq=5634 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993344 heater_bed: target=80 temp=80.0 pwm=0.511 sd_pos=18643 sysload=0.38 cputime=26.257 memavail=7295268 print_time=922.595 buffer_time=3.053 print_stall=0 extruder: target=250 temp=250.2 pwm=0.301
Stats 789388.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=120924 bytes_read=164723 bytes_retransmit=9 bytes_invalid=0 send_seq=5648 receive_seq=5648 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993334 heater_bed: target=80 temp=80.0 pwm=0.511 sd_pos=18643 sysload=0.38 cputime=26.308 memavail=7295348 print_time=922.595 buffer_time=2.052 print_stall=0 extruder: target=250 temp=250.1 pwm=0.297
Stats 789389.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=121691 bytes_read=165111 bytes_retransmit=9 bytes_invalid=0 send_seq=5670 receive_seq=5670 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993331 heater_bed: target=80 temp=80.0 pwm=0.570 sd_pos=18700 sysload=0.38 cputime=26.366 memavail=7295348 print_time=923.893 buffer_time=2.349 print_stall=0 extruder: target=250 temp=249.8 pwm=0.441
Stats 789390.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=122445 bytes_read=165514 bytes_retransmit=9 bytes_invalid=0 send_seq=5692 receive_seq=5692 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993321 heater_bed: target=80 temp=79.9 pwm=0.586 sd_pos=18740 sysload=0.38 cputime=26.423 memavail=7295348 print_time=924.951 buffer_time=2.406 print_stall=0 extruder: target=250 temp=249.9 pwm=0.334
Stats 789391.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=123329 bytes_read=165936 bytes_retransmit=9 bytes_invalid=0 send_seq=5718 receive_seq=5718 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993315 heater_bed: target=80 temp=79.9 pwm=0.516 sd_pos=18830 sysload=0.38 cputime=26.480 memavail=7295348 print_time=926.502 buffer_time=2.957 print_stall=0 extruder: target=250 temp=249.9 pwm=0.396
Stats 789392.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=124070 bytes_read=166339 bytes_retransmit=9 bytes_invalid=0 send_seq=5740 receive_seq=5740 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993309 heater_bed: target=80 temp=79.9 pwm=0.569 sd_pos=18870 sysload=0.35 cputime=26.530 memavail=7295348 print_time=927.560 buffer_time=3.014 print_stall=0 extruder: target=250 temp=250.2 pwm=0.218
Stats 789393.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=124326 bytes_read=166707 bytes_retransmit=9 bytes_invalid=0 send_seq=5755 receive_seq=5755 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993301 heater_bed: target=80 temp=79.9 pwm=0.458 sd_pos=18870 sysload=0.35 cputime=26.590 memavail=7295348 print_time=927.560 buffer_time=2.014 print_stall=0 extruder: target=250 temp=250.0 pwm=0.339
Stats 789394.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=125223 bytes_read=167119 bytes_retransmit=9 bytes_invalid=0 send_seq=5779 receive_seq=5779 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993334 heater_bed: target=80 temp=80.0 pwm=0.345 sd_pos=18955 sysload=0.35 cputime=26.650 memavail=7295348 print_time=929.112 buffer_time=2.565 print_stall=0 extruder: target=250 temp=250.3 pwm=0.200
Stats 789395.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=126010 bytes_read=167507 bytes_retransmit=9 bytes_invalid=0 send_seq=5801 receive_seq=5801 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993328 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=18984 sysload=0.35 cputime=26.705 memavail=7295348 print_time=930.170 buffer_time=2.622 print_stall=0 extruder: target=250 temp=249.9 pwm=0.365
Stats 789396.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=126862 bytes_read=167925 bytes_retransmit=9 bytes_invalid=0 send_seq=5826 receive_seq=5826 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993319 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=19068 sysload=0.35 cputime=26.766 memavail=7295124 print_time=931.722 buffer_time=3.173 print_stall=0 extruder: target=250 temp=250.0 pwm=0.321
Stats 789397.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=127120 bytes_read=168312 bytes_retransmit=9 bytes_invalid=0 send_seq=5842 receive_seq=5842 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993309 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=19068 sysload=0.32 cputime=26.824 memavail=7295124 print_time=931.722 buffer_time=2.172 print_stall=0 extruder: target=250 temp=250.1 pwm=0.302
Stats 789398.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=127888 bytes_read=168694 bytes_retransmit=9 bytes_invalid=0 send_seq=5864 receive_seq=5864 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993302 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=19097 sysload=0.32 cputime=26.879 memavail=7295124 print_time=932.780 buffer_time=2.230 print_stall=0 extruder: target=250 temp=250.3 pwm=0.180
Stats 789399.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=128701 bytes_read=169089 bytes_retransmit=9 bytes_invalid=0 send_seq=5886 receive_seq=5886 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993296 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=19182 sysload=0.32 cputime=26.934 memavail=7294900 print_time=934.331 buffer_time=2.781 print_stall=0 extruder: target=250 temp=250.1 pwm=0.307
Stats 789400.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=129475 bytes_read=169497 bytes_retransmit=9 bytes_invalid=0 send_seq=5910 receive_seq=5910 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993288 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=19211 sysload=0.32 cputime=26.988 memavail=7294040 print_time=935.389 buffer_time=2.838 print_stall=0 extruder: target=250 temp=250.0 pwm=0.350
Stats 789401.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=129707 bytes_read=169835 bytes_retransmit=9 bytes_invalid=0 send_seq=5922 receive_seq=5922 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993281 heater_bed: target=80 temp=80.0 pwm=0.524 sd_pos=19239 sysload=0.32 cputime=27.034 memavail=7296676 print_time=935.643 buffer_time=2.092 print_stall=0 extruder: target=250 temp=249.9 pwm=0.365
Stats 789402.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=130511 bytes_read=170253 bytes_retransmit=9 bytes_invalid=0 send_seq=5944 receive_seq=5944 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993275 heater_bed: target=80 temp=80.0 pwm=0.524 sd_pos=19296 sysload=0.30 cputime=27.084 memavail=7296004 print_time=936.941 buffer_time=2.389 print_stall=0 extruder: target=250 temp=250.2 pwm=0.208
Stats 789403.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=131318 bytes_read=170675 bytes_retransmit=9 bytes_invalid=0 send_seq=5970 receive_seq=5970 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993325 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=19336 sysload=0.30 cputime=27.144 memavail=7295556 print_time=937.999 buffer_time=2.446 print_stall=0 extruder: target=250 temp=250.1 pwm=0.296
Stats 789404.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=132107 bytes_read=171063 bytes_retransmit=9 bytes_invalid=0 send_seq=5992 receive_seq=5992 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993311 heater_bed: target=80 temp=80.0 pwm=0.557 sd_pos=19393 sysload=0.30 cputime=27.195 memavail=7294884 print_time=939.304 buffer_time=2.750 print_stall=0 extruder: target=250 temp=249.9 pwm=0.336
Stats 789405.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=132950 bytes_read=171481 bytes_retransmit=9 bytes_invalid=0 send_seq=6017 receive_seq=6017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993303 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=19450 sysload=0.30 cputime=27.254 memavail=7294660 print_time=940.609 buffer_time=3.054 print_stall=0 extruder: target=250 temp=249.8 pwm=0.393
Stats 789406.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=133152 bytes_read=171838 bytes_retransmit=9 bytes_invalid=0 send_seq=6030 receive_seq=6030 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993294 heater_bed: target=80 temp=79.9 pwm=0.533 sd_pos=19450 sysload=0.30 cputime=27.299 memavail=7294436 print_time=940.609 buffer_time=2.053 print_stall=0 extruder: target=250 temp=249.9 pwm=0.335
Stats 789407.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=133966 bytes_read=172241 bytes_retransmit=9 bytes_invalid=0 send_seq=6052 receive_seq=6052 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993285 heater_bed: target=80 temp=79.9 pwm=0.518 sd_pos=19507 sysload=0.35 cputime=27.359 memavail=7296712 print_time=941.914 buffer_time=2.357 print_stall=0 extruder: target=250 temp=250.2 pwm=0.225
Stats 789408.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=134801 bytes_read=172658 bytes_retransmit=9 bytes_invalid=0 send_seq=6074 receive_seq=6074 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119993282 heater_bed: target=80 temp=79.9 pwm=0.518 sd_pos=19564 sysload=0.35 cputime=27.417 memavail=7296264 print_time=943.218 buffer_time=2.661 print_stall=0 extruder: target=250 temp=250.1 pwm=0.296
Stats 789409.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=135655 bytes_read=173066 bytes_retransmit=9 bytes_invalid=0 send_seq=6100 receive_seq=6100 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993273 heater_bed: target=80 temp=79.9 pwm=0.430 sd_pos=19621 sysload=0.35 cputime=27.472 memavail=7295592 print_time=944.523 buffer_time=2.965 print_stall=0 extruder: target=250 temp=250.2 pwm=0.303
Stats 789410.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=135918 bytes_read=173419 bytes_retransmit=9 bytes_invalid=0 send_seq=6115 receive_seq=6115 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993266 heater_bed: target=80 temp=79.9 pwm=0.430 sd_pos=19649 sysload=0.35 cputime=27.517 memavail=7294360 print_time=944.770 buffer_time=2.212 print_stall=0 extruder: target=250 temp=250.1 pwm=0.332
Stats 789411.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=136661 bytes_read=173836 bytes_retransmit=9 bytes_invalid=0 send_seq=6137 receive_seq=6137 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119993266 heater_bed: target=80 temp=79.9 pwm=0.484 sd_pos=19678 sysload=0.35 cputime=27.580 memavail=7294136 print_time=945.828 buffer_time=2.269 print_stall=0 extruder: target=250 temp=250.1 pwm=0.305
Stats 789412.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=137531 bytes_read=174249 bytes_retransmit=9 bytes_invalid=0 send_seq=6161 receive_seq=6161 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993319 heater_bed: target=80 temp=79.9 pwm=0.461 sd_pos=19735 sysload=0.32 cputime=27.639 memavail=7293464 print_time=947.133 buffer_time=2.574 print_stall=0 extruder: target=250 temp=250.1 pwm=0.294
Stats 789413.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=138309 bytes_read=174642 bytes_retransmit=9 bytes_invalid=0 send_seq=6184 receive_seq=6184 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993307 heater_bed: target=80 temp=79.9 pwm=0.461 sd_pos=19791 sysload=0.32 cputime=27.687 memavail=7295692 print_time=948.438 buffer_time=2.878 print_stall=0 extruder: target=250 temp=249.9 pwm=0.315
Stats 789414.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=138564 bytes_read=175009 bytes_retransmit=9 bytes_invalid=0 send_seq=6196 receive_seq=6196 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119993297 heater_bed: target=80 temp=79.9 pwm=0.461 sd_pos=19819 sysload=0.32 cputime=27.736 memavail=7295244 print_time=948.692 buffer_time=2.132 print_stall=0 extruder: target=250 temp=249.8 pwm=0.394
Stats 789415.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=139352 bytes_read=175407 bytes_retransmit=9 bytes_invalid=0 send_seq=6220 receive_seq=6220 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993288 heater_bed: target=80 temp=79.9 pwm=0.485 sd_pos=19848 sysload=0.32 cputime=27.790 memavail=7294572 print_time=949.743 buffer_time=2.182 print_stall=0 extruder: target=250 temp=249.9 pwm=0.329
Stats 789416.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=140186 bytes_read=175800 bytes_retransmit=9 bytes_invalid=0 send_seq=6243 receive_seq=6243 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993312 heater_bed: target=80 temp=79.9 pwm=0.546 sd_pos=19905 sysload=0.32 cputime=27.845 memavail=7294572 print_time=951.047 buffer_time=2.486 print_stall=0 extruder: target=250 temp=250.3 pwm=0.186
Stats 789417.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=140976 bytes_read=176237 bytes_retransmit=9 bytes_invalid=0 send_seq=6266 receive_seq=6266 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119993301 heater_bed: target=80 temp=79.9 pwm=0.468 sd_pos=19962 sysload=0.54 cputime=27.913 memavail=7293712 print_time=952.352 buffer_time=2.790 print_stall=0 extruder: target=250 temp=250.1 pwm=0.282
Stats 789418.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=141287 bytes_read=176595 bytes_retransmit=9 bytes_invalid=0 send_seq=6282 receive_seq=6282 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993290 heater_bed: target=80 temp=79.9 pwm=0.468 sd_pos=19989 sysload=0.54 cputime=27.972 memavail=7293800 print_time=952.599 buffer_time=2.036 print_stall=0 extruder: target=250 temp=249.7 pwm=0.448
Stats 789419.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=142073 bytes_read=176978 bytes_retransmit=9 bytes_invalid=0 send_seq=6303 receive_seq=6303 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993282 heater_bed: target=80 temp=79.9 pwm=0.566 sd_pos=20017 sysload=0.54 cputime=28.030 memavail=7293800 print_time=953.657 buffer_time=2.094 print_stall=0 extruder: target=250 temp=249.9 pwm=0.325
Stats 789420.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=142908 bytes_read=177405 bytes_retransmit=9 bytes_invalid=0 send_seq=6327 receive_seq=6327 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993274 heater_bed: target=80 temp=79.9 pwm=0.493 sd_pos=20096 sysload=0.54 cputime=28.101 memavail=7293296 print_time=954.962 buffer_time=2.397 print_stall=0 extruder: target=250 temp=250.0 pwm=0.332
Stats 789421.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=143764 bytes_read=177808 bytes_retransmit=9 bytes_invalid=0 send_seq=6352 receive_seq=6352 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993269 heater_bed: target=80 temp=79.9 pwm=0.491 sd_pos=20153 sysload=0.54 cputime=28.167 memavail=7293300 print_time=956.267 buffer_time=2.700 print_stall=0 extruder: target=250 temp=250.1 pwm=0.300
Stats 789422.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=144550 bytes_read=178211 bytes_retransmit=9 bytes_invalid=0 send_seq=6374 receive_seq=6374 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993259 heater_bed: target=80 temp=79.9 pwm=0.488 sd_pos=20210 sysload=0.50 cputime=28.229 memavail=7293300 print_time=957.572 buffer_time=3.004 print_stall=0 extruder: target=250 temp=250.1 pwm=0.301
Stats 789423.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=144784 bytes_read=178588 bytes_retransmit=9 bytes_invalid=0 send_seq=6388 receive_seq=6388 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993252 heater_bed: target=80 temp=79.9 pwm=0.541 sd_pos=20210 sysload=0.50 cputime=28.280 memavail=7293300 print_time=957.572 buffer_time=2.003 print_stall=0 extruder: target=250 temp=250.1 pwm=0.301
Stats 789424.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=145624 bytes_read=178976 bytes_retransmit=9 bytes_invalid=0 send_seq=6410 receive_seq=6410 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993249 heater_bed: target=80 temp=79.9 pwm=0.451 sd_pos=20266 sysload=0.50 cputime=28.342 memavail=7293300 print_time=958.877 buffer_time=2.307 print_stall=0 extruder: target=250 temp=249.8 pwm=0.452
Stats 789425.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=146447 bytes_read=179364 bytes_retransmit=9 bytes_invalid=0 send_seq=6432 receive_seq=6432 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993269 heater_bed: target=80 temp=79.9 pwm=0.530 sd_pos=20323 sysload=0.50 cputime=28.407 memavail=7293300 print_time=960.181 buffer_time=2.612 print_stall=0 extruder: target=250 temp=250.0 pwm=0.271
Stats 789426.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=147295 bytes_read=179786 bytes_retransmit=9 bytes_invalid=0 send_seq=6455 receive_seq=6455 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993262 heater_bed: target=80 temp=79.9 pwm=0.500 sd_pos=20380 sysload=0.50 cputime=28.470 memavail=7293300 print_time=961.486 buffer_time=2.915 print_stall=0 extruder: target=250 temp=249.8 pwm=0.384
Stats 789427.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=147545 bytes_read=180154 bytes_retransmit=9 bytes_invalid=0 send_seq=6470 receive_seq=6470 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119993253 heater_bed: target=80 temp=79.9 pwm=0.530 sd_pos=20408 sysload=0.54 cputime=28.521 memavail=7293300 print_time=961.740 buffer_time=2.169 print_stall=0 extruder: target=250 temp=250.0 pwm=0.322
Stats 789428.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=148285 bytes_read=180537 bytes_retransmit=9 bytes_invalid=0 send_seq=6491 receive_seq=6491 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993252 heater_bed: target=80 temp=79.9 pwm=0.514 sd_pos=20437 sysload=0.54 cputime=28.575 memavail=7293300 print_time=962.791 buffer_time=2.219 print_stall=0 extruder: target=250 temp=250.4 pwm=0.161
Stats 789429.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=149114 bytes_read=180964 bytes_retransmit=9 bytes_invalid=0 send_seq=6515 receive_seq=6515 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993246 heater_bed: target=80 temp=79.9 pwm=0.439 sd_pos=20494 sysload=0.54 cputime=28.633 memavail=7293300 print_time=964.096 buffer_time=2.523 print_stall=0 extruder: target=250 temp=250.1 pwm=0.359
Stats 789430.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=149974 bytes_read=181367 bytes_retransmit=9 bytes_invalid=0 send_seq=6540 receive_seq=6540 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993268 heater_bed: target=80 temp=79.9 pwm=0.402 sd_pos=20551 sysload=0.54 cputime=28.699 memavail=7292796 print_time=965.401 buffer_time=2.828 print_stall=0 extruder: target=250 temp=250.2 pwm=0.308
Stats 789431.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=150212 bytes_read=181715 bytes_retransmit=9 bytes_invalid=0 send_seq=6554 receive_seq=6554 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993259 heater_bed: target=80 temp=79.9 pwm=0.547 sd_pos=20579 sysload=0.54 cputime=28.747 memavail=7292796 print_time=965.648 buffer_time=2.074 print_stall=0 extruder: target=250 temp=250.1 pwm=0.297
Stats 789432.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=151016 bytes_read=182162 bytes_retransmit=9 bytes_invalid=0 send_seq=6579 receive_seq=6579 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993253 heater_bed: target=80 temp=79.9 pwm=0.443 sd_pos=20608 sysload=0.49 cputime=28.801 memavail=7292796 print_time=966.706 buffer_time=2.131 print_stall=0 extruder: target=250 temp=249.8 pwm=0.365
Stats 789433.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=151898 bytes_read=182586 bytes_retransmit=9 bytes_invalid=0 send_seq=6606 receive_seq=6606 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993309 heater_bed: target=80 temp=79.9 pwm=0.439 sd_pos=20665 sysload=0.49 cputime=28.876 memavail=7292796 print_time=968.010 buffer_time=2.435 print_stall=0 extruder: target=250 temp=250.2 pwm=0.226
Stats 789434.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=152738 bytes_read=182972 bytes_retransmit=9 bytes_invalid=0 send_seq=6629 receive_seq=6629 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993299 heater_bed: target=80 temp=79.9 pwm=0.507 sd_pos=20722 sysload=0.49 cputime=28.931 memavail=7292796 print_time=969.315 buffer_time=2.740 print_stall=0 extruder: target=250 temp=250.3 pwm=0.197
Stats 789435.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=153491 bytes_read=183380 bytes_retransmit=9 bytes_invalid=0 send_seq=6651 receive_seq=6651 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119993289 heater_bed: target=80 temp=79.9 pwm=0.507 sd_pos=20778 sysload=0.49 cputime=28.988 memavail=7292796 print_time=970.620 buffer_time=3.044 print_stall=0 extruder: target=250 temp=250.1 pwm=0.334
Stats 789436.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=153695 bytes_read=183723 bytes_retransmit=9 bytes_invalid=0 send_seq=6664 receive_seq=6664 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993279 heater_bed: target=80 temp=79.9 pwm=0.507 sd_pos=20778 sysload=0.49 cputime=29.036 memavail=7292956 print_time=970.620 buffer_time=2.043 print_stall=0 extruder: target=250 temp=250.0 pwm=0.380
Stats 789437.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=154519 bytes_read=184141 bytes_retransmit=9 bytes_invalid=0 send_seq=6686 receive_seq=6686 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119993271 heater_bed: target=80 temp=79.9 pwm=0.446 sd_pos=20835 sysload=0.45 cputime=29.093 memavail=7293052 print_time=971.925 buffer_time=2.347 print_stall=0 extruder: target=250 temp=250.1 pwm=0.299
Stats 789438.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=155379 bytes_read=184558 bytes_retransmit=9 bytes_invalid=0 send_seq=6711 receive_seq=6711 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993262 heater_bed: target=80 temp=79.9 pwm=0.514 sd_pos=20892 sysload=0.45 cputime=29.152 memavail=7293052 print_time=973.230 buffer_time=2.650 print_stall=0 extruder: target=250 temp=249.7 pwm=0.497
Stats 789439.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=156230 bytes_read=184961 bytes_retransmit=9 bytes_invalid=0 send_seq=6736 receive_seq=6736 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993254 heater_bed: target=80 temp=79.9 pwm=0.446 sd_pos=20949 sysload=0.45 cputime=29.214 memavail=7293052 print_time=974.535 buffer_time=2.953 print_stall=0 extruder: target=250 temp=250.0 pwm=0.319
Stats 789440.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=156493 bytes_read=185324 bytes_retransmit=9 bytes_invalid=0 send_seq=6750 receive_seq=6750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993254 heater_bed: target=80 temp=79.9 pwm=0.511 sd_pos=20976 sysload=0.45 cputime=29.269 memavail=7293052 print_time=974.789 buffer_time=2.207 print_stall=0 extruder: target=250 temp=250.0 pwm=0.319
Stats 789441.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=157241 bytes_read=185731 bytes_retransmit=9 bytes_invalid=0 send_seq=6773 receive_seq=6773 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993249 heater_bed: target=80 temp=79.9 pwm=0.498 sd_pos=21004 sysload=0.45 cputime=29.327 memavail=7292812 print_time=975.839 buffer_time=2.257 print_stall=0 extruder: target=250 temp=250.0 pwm=0.355
Stats 789442.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=158111 bytes_read=186139 bytes_retransmit=9 bytes_invalid=0 send_seq=6796 receive_seq=6796 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993295 heater_bed: target=80 temp=79.9 pwm=0.512 sd_pos=21061 sysload=0.42 cputime=29.384 memavail=7292812 print_time=977.144 buffer_time=2.561 print_stall=0 extruder: target=250 temp=250.1 pwm=0.275
Stats 789443.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=158948 bytes_read=186547 bytes_retransmit=9 bytes_invalid=0 send_seq=6819 receive_seq=6819 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993285 heater_bed: target=80 temp=79.9 pwm=0.418 sd_pos=21118 sysload=0.42 cputime=29.443 memavail=7292812 print_time=978.449 buffer_time=2.865 print_stall=0 extruder: target=250 temp=250.2 pwm=0.236
Stats 789444.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=159213 bytes_read=186919 bytes_retransmit=9 bytes_invalid=0 send_seq=6835 receive_seq=6835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119993275 heater_bed: target=80 temp=79.9 pwm=0.471 sd_pos=21147 sysload=0.42 cputime=29.504 memavail=7292812 print_time=978.696 buffer_time=2.111 print_stall=0 extruder: target=250 temp=249.9 pwm=0.326
Stats 789445.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=159991 bytes_read=187317 bytes_retransmit=9 bytes_invalid=0 send_seq=6859 receive_seq=6859 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993265 heater_bed: target=80 temp=79.9 pwm=0.462 sd_pos=21176 sysload=0.42 cputime=29.558 memavail=7292812 print_time=979.754 buffer_time=2.167 print_stall=0 extruder: target=250 temp=249.9 pwm=0.372
Stats 789446.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=160747 bytes_read=187710 bytes_retransmit=9 bytes_invalid=0 send_seq=6879 receive_seq=6879 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993283 heater_bed: target=80 temp=79.9 pwm=0.539 sd_pos=21233 sysload=0.42 cputime=29.618 memavail=7292812 print_time=981.059 buffer_time=2.468 print_stall=0 extruder: target=250 temp=249.9 pwm=0.372
Stats 789447.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=161619 bytes_read=188147 bytes_retransmit=9 bytes_invalid=0 send_seq=6905 receive_seq=6905 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993273 heater_bed: target=80 temp=79.9 pwm=0.478 sd_pos=21302 sysload=0.62 cputime=29.690 memavail=7292708 print_time=982.364 buffer_time=2.772 print_stall=0 extruder: target=250 temp=250.1 pwm=0.245
Stats 789448.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=161894 bytes_read=188500 bytes_retransmit=9 bytes_invalid=0 send_seq=6920 receive_seq=6920 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993263 heater_bed: target=80 temp=79.9 pwm=0.478 sd_pos=21330 sysload=0.62 cputime=29.743 memavail=7292792 print_time=982.618 buffer_time=2.025 print_stall=0 extruder: target=250 temp=250.0 pwm=0.318
Stats 789449.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=162614 bytes_read=188893 bytes_retransmit=9 bytes_invalid=0 send_seq=6940 receive_seq=6940 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993254 heater_bed: target=80 temp=79.9 pwm=0.478 sd_pos=21371 sysload=0.62 cputime=29.807 memavail=7292792 print_time=983.669 buffer_time=2.075 print_stall=0 extruder: target=250 temp=250.0 pwm=0.340
Stats 789450.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=163391 bytes_read=189290 bytes_retransmit=9 bytes_invalid=0 send_seq=6961 receive_seq=6961 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993246 heater_bed: target=80 temp=79.9 pwm=0.531 sd_pos=21440 sysload=0.62 cputime=29.869 memavail=7292792 print_time=984.973 buffer_time=2.380 print_stall=0 extruder: target=250 temp=249.9 pwm=0.340
Stats 789451.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=164239 bytes_read=189688 bytes_retransmit=9 bytes_invalid=0 send_seq=6985 receive_seq=6985 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993283 heater_bed: target=80 temp=80.0 pwm=0.369 sd_pos=21498 sysload=0.62 cputime=29.923 memavail=7292796 print_time=986.278 buffer_time=2.684 print_stall=0 extruder: target=250 temp=249.8 pwm=0.445
Stats 789452.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=164973 bytes_read=190096 bytes_retransmit=9 bytes_invalid=0 send_seq=7005 receive_seq=7005 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993275 heater_bed: target=80 temp=79.9 pwm=0.565 sd_pos=21556 sysload=0.57 cputime=29.981 memavail=7292796 print_time=987.583 buffer_time=2.989 print_stall=0 extruder: target=250 temp=250.2 pwm=0.228
Stats 789453.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=165287 bytes_read=190468 bytes_retransmit=9 bytes_invalid=0 send_seq=7021 receive_seq=7021 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993265 heater_bed: target=80 temp=79.9 pwm=0.522 sd_pos=21584 sysload=0.57 cputime=30.031 memavail=7292796 print_time=987.837 buffer_time=2.243 print_stall=0 extruder: target=250 temp=250.2 pwm=0.242
Stats 789454.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=166026 bytes_read=190856 bytes_retransmit=9 bytes_invalid=0 send_seq=7043 receive_seq=7043 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993259 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=21614 sysload=0.57 cputime=30.088 memavail=7292796 print_time=988.888 buffer_time=2.293 print_stall=0 extruder: target=250 temp=250.1 pwm=0.305
Stats 789455.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=166859 bytes_read=191264 bytes_retransmit=9 bytes_invalid=0 send_seq=7066 receive_seq=7066 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993339 heater_bed: target=80 temp=80.0 pwm=0.530 sd_pos=21672 sysload=0.57 cputime=30.155 memavail=7292796 print_time=990.193 buffer_time=2.596 print_stall=0 extruder: target=250 temp=249.6 pwm=0.452
Stats 789456.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=167709 bytes_read=191681 bytes_retransmit=9 bytes_invalid=0 send_seq=7091 receive_seq=7091 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119993324 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=21730 sysload=0.57 cputime=30.208 memavail=7292796 print_time=991.498 buffer_time=2.901 print_stall=0 extruder: target=250 temp=250.3 pwm=0.145
Stats 789457.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=167961 bytes_read=192044 bytes_retransmit=9 bytes_invalid=0 send_seq=7105 receive_seq=7105 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119993310 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=21759 sysload=0.53 cputime=30.255 memavail=7292796 print_time=991.745 buffer_time=2.147 print_stall=0 extruder: target=250 temp=250.1 pwm=0.323
Stats 789458.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=168767 bytes_read=192452 bytes_retransmit=9 bytes_invalid=0 send_seq=7128 receive_seq=7128 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993300 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=21788 sysload=0.53 cputime=30.302 memavail=7292796 print_time=992.802 buffer_time=2.204 print_stall=0 extruder: target=250 temp=250.0 pwm=0.322
Stats 789459.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=169587 bytes_read=192859 bytes_retransmit=9 bytes_invalid=0 send_seq=7151 receive_seq=7151 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993290 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=21846 sysload=0.53 cputime=30.356 memavail=7292796 print_time=994.107 buffer_time=2.507 print_stall=0 extruder: target=250 temp=249.9 pwm=0.434
Stats 789460.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=170467 bytes_read=193262 bytes_retransmit=9 bytes_invalid=0 send_seq=7176 receive_seq=7176 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993284 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=21904 sysload=0.53 cputime=30.412 memavail=7292796 print_time=995.412 buffer_time=2.812 print_stall=0 extruder: target=250 temp=250.3 pwm=0.178
Stats 789461.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=170733 bytes_read=193630 bytes_retransmit=9 bytes_invalid=0 send_seq=7191 receive_seq=7191 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993283 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=21932 sysload=0.53 cputime=30.463 memavail=7292800 print_time=995.666 buffer_time=2.065 print_stall=0 extruder: target=250 temp=250.0 pwm=0.368
Stats 789462.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=171481 bytes_read=194047 bytes_retransmit=9 bytes_invalid=0 send_seq=7213 receive_seq=7213 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993271 heater_bed: target=80 temp=80.0 pwm=0.515 sd_pos=21962 sysload=0.48 cputime=30.514 memavail=7292800 print_time=996.717 buffer_time=2.116 print_stall=0 extruder: target=250 temp=249.8 pwm=0.397
Stats 789463.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=172376 bytes_read=194455 bytes_retransmit=9 bytes_invalid=0 send_seq=7239 receive_seq=7239 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993262 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=22029 sysload=0.48 cputime=30.569 memavail=7292800 print_time=998.022 buffer_time=2.421 print_stall=0 extruder: target=250 temp=249.8 pwm=0.426
Stats 789464.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=173202 bytes_read=194858 bytes_retransmit=9 bytes_invalid=0 send_seq=7261 receive_seq=7261 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993292 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=22087 sysload=0.48 cputime=30.629 memavail=7292800 print_time=999.327 buffer_time=2.724 print_stall=0 extruder: target=250 temp=250.0 pwm=0.327
Stats 789465.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=174017 bytes_read=195265 bytes_retransmit=9 bytes_invalid=0 send_seq=7284 receive_seq=7284 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993281 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=22145 sysload=0.48 cputime=30.682 memavail=7292800 print_time=1000.632 buffer_time=3.029 print_stall=0 extruder: target=250 temp=249.8 pwm=0.397
Stats 789466.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=174246 bytes_read=195608 bytes_retransmit=9 bytes_invalid=0 send_seq=7297 receive_seq=7297 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993269 heater_bed: target=80 temp=80.0 pwm=0.515 sd_pos=22145 sysload=0.48 cputime=30.736 memavail=7292804 print_time=1000.632 buffer_time=2.028 print_stall=0 extruder: target=250 temp=250.0 pwm=0.326
Stats 789467.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=175068 bytes_read=196026 bytes_retransmit=9 bytes_invalid=0 send_seq=7319 receive_seq=7319 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993260 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=22203 sysload=0.53 cputime=30.791 memavail=7292804 print_time=1001.936 buffer_time=2.332 print_stall=0 extruder: target=250 temp=250.1 pwm=0.246
Stats 789468.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=175930 bytes_read=196448 bytes_retransmit=9 bytes_invalid=0 send_seq=7345 receive_seq=7345 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993247 heater_bed: target=80 temp=80.0 pwm=0.577 sd_pos=22260 sysload=0.53 cputime=30.859 memavail=7292804 print_time=1003.241 buffer_time=2.635 print_stall=0 extruder: target=250 temp=250.1 pwm=0.226
Stats 789469.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=176675 bytes_read=196829 bytes_retransmit=9 bytes_invalid=0 send_seq=7366 receive_seq=7366 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993247 heater_bed: target=80 temp=80.0 pwm=0.516 sd_pos=22318 sysload=0.53 cputime=30.918 memavail=7292804 print_time=1004.546 buffer_time=2.939 print_stall=0 extruder: target=250 temp=250.0 pwm=0.349
Stats 789470.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=176951 bytes_read=197184 bytes_retransmit=9 bytes_invalid=0 send_seq=7380 receive_seq=7380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119993240 heater_bed: target=80 temp=80.0 pwm=0.521 sd_pos=22347 sysload=0.53 cputime=30.974 memavail=7292804 print_time=1004.793 buffer_time=2.185 print_stall=0 extruder: target=250 temp=250.2 pwm=0.297
Stats 789471.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=177711 bytes_read=197579 bytes_retransmit=9 bytes_invalid=0 send_seq=7402 receive_seq=7402 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993237 heater_bed: target=80 temp=80.0 pwm=0.514 sd_pos=22376 sysload=0.53 cputime=31.033 memavail=7292804 print_time=1005.851 buffer_time=2.243 print_stall=0 extruder: target=250 temp=249.9 pwm=0.356
Stats 789472.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=178542 bytes_read=197987 bytes_retransmit=9 bytes_invalid=0 send_seq=7425 receive_seq=7425 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993231 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=22434 sysload=0.48 cputime=31.090 memavail=7292804 print_time=1007.156 buffer_time=2.547 print_stall=0 extruder: target=250 temp=250.1 pwm=0.314
Stats 789473.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=179293 bytes_read=198380 bytes_retransmit=9 bytes_invalid=0 send_seq=7445 receive_seq=7445 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993224 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=22492 sysload=0.48 cputime=31.164 memavail=7292804 print_time=1008.461 buffer_time=2.851 print_stall=0 extruder: target=250 temp=250.2 pwm=0.267
Stats 789474.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=179627 bytes_read=198752 bytes_retransmit=9 bytes_invalid=0 send_seq=7461 receive_seq=7461 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993217 heater_bed: target=80 temp=80.1 pwm=0.386 sd_pos=22520 sysload=0.48 cputime=31.229 memavail=7292804 print_time=1008.715 buffer_time=2.104 print_stall=0 extruder: target=250 temp=250.1 pwm=0.277
Stats 789475.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=180371 bytes_read=199135 bytes_retransmit=9 bytes_invalid=0 send_seq=7482 receive_seq=7482 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993207 heater_bed: target=80 temp=80.1 pwm=0.444 sd_pos=22550 sysload=0.48 cputime=31.286 memavail=7292804 print_time=1009.765 buffer_time=2.154 print_stall=0 extruder: target=250 temp=249.6 pwm=0.482
Stats 789476.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=181229 bytes_read=199543 bytes_retransmit=9 bytes_invalid=0 send_seq=7505 receive_seq=7505 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993206 heater_bed: target=80 temp=80.1 pwm=0.285 sd_pos=22631 sysload=0.48 cputime=31.354 memavail=7292804 print_time=1011.070 buffer_time=2.458 print_stall=0 extruder: target=250 temp=249.9 pwm=0.306
Stats 789477.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=182060 bytes_read=199965 bytes_retransmit=9 bytes_invalid=0 send_seq=7528 receive_seq=7528 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993220 heater_bed: target=80 temp=80.1 pwm=0.451 sd_pos=22690 sysload=0.53 cputime=31.423 memavail=7291944 print_time=1012.375 buffer_time=2.762 print_stall=0 extruder: target=250 temp=250.0 pwm=0.316
Stats 789478.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=182326 bytes_read=200313 bytes_retransmit=9 bytes_invalid=0 send_seq=7542 receive_seq=7542 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993211 heater_bed: target=80 temp=80.1 pwm=0.451 sd_pos=22719 sysload=0.53 cputime=31.478 memavail=7292032 print_time=1012.622 buffer_time=2.009 print_stall=0 extruder: target=250 temp=250.1 pwm=0.293
Stats 789479.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=183041 bytes_read=200701 bytes_retransmit=9 bytes_invalid=0 send_seq=7561 receive_seq=7561 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993202 heater_bed: target=80 temp=80.1 pwm=0.451 sd_pos=22749 sysload=0.53 cputime=31.534 memavail=7292032 print_time=1013.680 buffer_time=2.066 print_stall=0 extruder: target=250 temp=249.9 pwm=0.378
Stats 789480.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=183896 bytes_read=201118 bytes_retransmit=9 bytes_invalid=0 send_seq=7586 receive_seq=7586 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993196 heater_bed: target=80 temp=80.1 pwm=0.507 sd_pos=22808 sysload=0.53 cputime=31.587 memavail=7292032 print_time=1014.985 buffer_time=2.370 print_stall=0 extruder: target=250 temp=250.3 pwm=0.168
Stats 789481.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=184765 bytes_read=201521 bytes_retransmit=9 bytes_invalid=0 send_seq=7611 receive_seq=7611 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993190 heater_bed: target=80 temp=80.1 pwm=0.496 sd_pos=22867 sysload=0.53 cputime=31.636 memavail=7292536 print_time=1016.290 buffer_time=2.674 print_stall=0 extruder: target=250 temp=249.8 pwm=0.418
Stats 789482.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=185520 bytes_read=201929 bytes_retransmit=9 bytes_invalid=0 send_seq=7631 receive_seq=7631 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119993183 heater_bed: target=80 temp=80.1 pwm=0.451 sd_pos=22926 sysload=0.48 cputime=31.696 memavail=7292536 print_time=1017.595 buffer_time=2.978 print_stall=0 extruder: target=250 temp=250.0 pwm=0.308
Stats 789483.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=185798 bytes_read=202306 bytes_retransmit=9 bytes_invalid=0 send_seq=7648 receive_seq=7648 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993174 heater_bed: target=80 temp=80.1 pwm=0.474 sd_pos=22955 sysload=0.48 cputime=31.747 memavail=7292536 print_time=1017.842 buffer_time=2.224 print_stall=0 extruder: target=250 temp=249.7 pwm=0.379
Stats 789484.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=186574 bytes_read=202689 bytes_retransmit=9 bytes_invalid=0 send_seq=7669 receive_seq=7669 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993176 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=22985 sysload=0.48 cputime=31.799 memavail=7292536 print_time=1018.899 buffer_time=2.282 print_stall=0 extruder: target=250 temp=250.2 pwm=0.171
Stats 789485.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=187428 bytes_read=203102 bytes_retransmit=9 bytes_invalid=0 send_seq=7693 receive_seq=7693 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993170 heater_bed: target=80 temp=80.1 pwm=0.441 sd_pos=23043 sysload=0.48 cputime=31.848 memavail=7292536 print_time=1020.204 buffer_time=2.586 print_stall=0 extruder: target=250 temp=250.4 pwm=0.165
Stats 789486.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=188283 bytes_read=203524 bytes_retransmit=9 bytes_invalid=0 send_seq=7719 receive_seq=7719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993222 heater_bed: target=80 temp=80.1 pwm=0.241 sd_pos=23102 sysload=0.48 cputime=31.906 memavail=7292536 print_time=1021.509 buffer_time=2.890 print_stall=0 extruder: target=250 temp=250.1 pwm=0.304
Stats 789487.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=188549 bytes_read=203892 bytes_retransmit=9 bytes_invalid=0 send_seq=7734 receive_seq=7734 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993215 heater_bed: target=80 temp=80.1 pwm=0.388 sd_pos=23131 sysload=0.52 cputime=31.958 memavail=7292536 print_time=1021.763 buffer_time=2.144 print_stall=0 extruder: target=250 temp=249.7 pwm=0.491
Stats 789488.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=189329 bytes_read=204295 bytes_retransmit=9 bytes_invalid=0 send_seq=7756 receive_seq=7756 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993214 heater_bed: target=80 temp=80.1 pwm=0.426 sd_pos=23161 sysload=0.52 cputime=32.015 memavail=7292536 print_time=1022.814 buffer_time=2.193 print_stall=0 extruder: target=250 temp=250.1 pwm=0.271
Stats 789489.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=190113 bytes_read=204697 bytes_retransmit=9 bytes_invalid=0 send_seq=7778 receive_seq=7778 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993208 heater_bed: target=80 temp=80.1 pwm=0.426 sd_pos=23220 sysload=0.52 cputime=32.068 memavail=7292536 print_time=1024.118 buffer_time=2.498 print_stall=0 extruder: target=250 temp=249.9 pwm=0.370
Stats 789490.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=190881 bytes_read=205085 bytes_retransmit=9 bytes_invalid=0 send_seq=7800 receive_seq=7800 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993203 heater_bed: target=80 temp=80.1 pwm=0.426 sd_pos=23272 sysload=0.52 cputime=32.118 memavail=7292536 print_time=1025.423 buffer_time=2.802 print_stall=0 extruder: target=250 temp=250.0 pwm=0.325
Stats 789491.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=191115 bytes_read=205443 bytes_retransmit=9 bytes_invalid=0 send_seq=7813 receive_seq=7813 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993199 heater_bed: target=80 temp=80.1 pwm=0.482 sd_pos=23301 sysload=0.52 cputime=32.169 memavail=7292292 print_time=1025.668 buffer_time=2.046 print_stall=0 extruder: target=250 temp=250.2 pwm=0.249
Stats 789492.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=191954 bytes_read=205875 bytes_retransmit=9 bytes_invalid=0 send_seq=7838 receive_seq=7838 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993196 heater_bed: target=80 temp=80.1 pwm=0.465 sd_pos=23331 sysload=0.48 cputime=32.227 memavail=7292292 print_time=1026.724 buffer_time=2.102 print_stall=0 extruder: target=250 temp=250.2 pwm=0.259
Stats 789493.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=192780 bytes_read=206279 bytes_retransmit=9 bytes_invalid=0 send_seq=7861 receive_seq=7861 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993188 heater_bed: target=80 temp=80.1 pwm=0.495 sd_pos=23390 sysload=0.48 cputime=32.280 memavail=7292292 print_time=1028.025 buffer_time=2.401 print_stall=0 extruder: target=250 temp=250.1 pwm=0.344
Stats 789494.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=193634 bytes_read=206677 bytes_retransmit=9 bytes_invalid=0 send_seq=7882 receive_seq=7882 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=80.1 pwm=0.383 sd_pos=23448 sysload=0.48 cputime=32.336 memavail=7292292 print_time=1029.319 buffer_time=2.696 print_stall=0 extruder: target=250 temp=250.1 pwm=0.284
Stats 789495.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=194469 bytes_read=207089 bytes_retransmit=9 bytes_invalid=0 send_seq=7906 receive_seq=7906 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993221 heater_bed: target=80 temp=80.1 pwm=0.358 sd_pos=23506 sysload=0.48 cputime=32.383 memavail=7292292 print_time=1030.611 buffer_time=2.986 print_stall=0 extruder: target=250 temp=250.2 pwm=0.210
Stats 789496.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=194719 bytes_read=207437 bytes_retransmit=9 bytes_invalid=0 send_seq=7920 receive_seq=7920 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993209 heater_bed: target=80 temp=80.1 pwm=0.443 sd_pos=23535 sysload=0.48 cputime=32.425 memavail=7292240 print_time=1030.840 buffer_time=2.215 print_stall=0 extruder: target=250 temp=250.1 pwm=0.268
Stats 789497.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=195538 bytes_read=207855 bytes_retransmit=9 bytes_invalid=0 send_seq=7942 receive_seq=7942 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993198 heater_bed: target=80 temp=80.1 pwm=0.433 sd_pos=23565 sysload=0.44 cputime=32.467 memavail=7292400 print_time=1031.894 buffer_time=2.268 print_stall=0 extruder: target=250 temp=250.0 pwm=0.280
Stats 789498.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=196452 bytes_read=208272 bytes_retransmit=9 bytes_invalid=0 send_seq=7967 receive_seq=7967 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993189 heater_bed: target=80 temp=80.1 pwm=0.471 sd_pos=23652 sysload=0.44 cputime=32.508 memavail=7292496 print_time=1033.387 buffer_time=2.760 print_stall=0 extruder: target=250 temp=250.1 pwm=0.339
Stats 789499.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=197301 bytes_read=208670 bytes_retransmit=9 bytes_invalid=0 send_seq=7991 receive_seq=7991 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993235 heater_bed: target=80 temp=80.1 pwm=0.423 sd_pos=23710 sysload=0.44 cputime=32.568 memavail=7292496 print_time=1034.651 buffer_time=3.024 print_stall=0 extruder: target=250 temp=250.0 pwm=0.355
Stats 789500.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=197528 bytes_read=209033 bytes_retransmit=9 bytes_invalid=0 send_seq=8005 receive_seq=8005 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993223 heater_bed: target=80 temp=80.2 pwm=0.338 sd_pos=23710 sysload=0.44 cputime=32.618 memavail=7292496 print_time=1034.651 buffer_time=2.024 print_stall=0 extruder: target=250 temp=249.7 pwm=0.458
Stats 789501.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=198393 bytes_read=209455 bytes_retransmit=9 bytes_invalid=0 send_seq=8031 receive_seq=8031 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993215 heater_bed: target=80 temp=80.1 pwm=0.480 sd_pos=23769 sysload=0.44 cputime=32.670 memavail=7292528 print_time=1035.899 buffer_time=2.270 print_stall=0 extruder: target=250 temp=250.0 pwm=0.329
Stats 789502.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=199280 bytes_read=209868 bytes_retransmit=9 bytes_invalid=0 send_seq=8055 receive_seq=8055 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993210 heater_bed: target=80 temp=80.1 pwm=0.396 sd_pos=23828 sysload=0.41 cputime=32.724 memavail=7292528 print_time=1037.141 buffer_time=2.511 print_stall=0 extruder: target=250 temp=250.3 pwm=0.152
Stats 789503.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=200089 bytes_read=210266 bytes_retransmit=9 bytes_invalid=0 send_seq=8076 receive_seq=8076 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993239 heater_bed: target=80 temp=80.2 pwm=0.396 sd_pos=23887 sysload=0.41 cputime=32.779 memavail=7292528 print_time=1038.365 buffer_time=2.736 print_stall=0 extruder: target=250 temp=250.3 pwm=0.226
Stats 789504.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=200955 bytes_read=210683 bytes_retransmit=9 bytes_invalid=0 send_seq=8101 receive_seq=8101 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=80.1 pwm=0.396 sd_pos=23968 sysload=0.41 cputime=32.831 memavail=7292528 print_time=1039.584 buffer_time=2.954 print_stall=0 extruder: target=250 temp=250.5 pwm=0.153
Stats 789505.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=201739 bytes_read=211072 bytes_retransmit=9 bytes_invalid=0 send_seq=8124 receive_seq=8124 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993219 heater_bed: target=80 temp=80.2 pwm=0.396 sd_pos=24026 sysload=0.41 cputime=32.878 memavail=7292304 print_time=1040.785 buffer_time=3.154 print_stall=0 extruder: target=250 temp=250.1 pwm=0.372
Stats 789506.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=201963 bytes_read=211427 bytes_retransmit=9 bytes_invalid=0 send_seq=8138 receive_seq=8138 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993212 heater_bed: target=80 temp=80.2 pwm=0.429 sd_pos=24026 sysload=0.41 cputime=32.934 memavail=7292304 print_time=1040.785 buffer_time=2.153 print_stall=0 extruder: target=250 temp=250.0 pwm=0.351
Stats 789507.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=202890 bytes_read=211858 bytes_retransmit=9 bytes_invalid=0 send_seq=8164 receive_seq=8164 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993248 heater_bed: target=80 temp=80.2 pwm=0.375 sd_pos=24085 sysload=0.37 cputime=32.990 memavail=7292304 print_time=1041.975 buffer_time=2.343 print_stall=0 extruder: target=250 temp=250.0 pwm=0.303
Stats 789508.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=203689 bytes_read=212246 bytes_retransmit=9 bytes_invalid=0 send_seq=8186 receive_seq=8186 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993278 heater_bed: target=80 temp=80.1 pwm=0.519 sd_pos=24171 sysload=0.37 cputime=33.049 memavail=7294912 print_time=1043.164 buffer_time=2.531 print_stall=0 extruder: target=250 temp=249.8 pwm=0.410
Stats 789509.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=204529 bytes_read=212649 bytes_retransmit=9 bytes_invalid=0 send_seq=8208 receive_seq=8208 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993273 heater_bed: target=80 temp=80.1 pwm=0.461 sd_pos=24230 sysload=0.37 cputime=33.108 memavail=7295124 print_time=1044.307 buffer_time=2.674 print_stall=0 extruder: target=250 temp=250.0 pwm=0.319
Stats 789510.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=205339 bytes_read=213061 bytes_retransmit=9 bytes_invalid=0 send_seq=8232 receive_seq=8232 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993261 heater_bed: target=80 temp=80.1 pwm=0.535 sd_pos=24298 sysload=0.37 cputime=33.157 memavail=7295124 print_time=1045.449 buffer_time=2.815 print_stall=0 extruder: target=250 temp=250.6 pwm=0.089
Stats 789511.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=206196 bytes_read=213454 bytes_retransmit=9 bytes_invalid=0 send_seq=8255 receive_seq=8255 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119993247 heater_bed: target=80 temp=80.1 pwm=0.399 sd_pos=24356 sysload=0.37 cputime=33.199 memavail=7295376 print_time=1046.577 buffer_time=2.942 print_stall=0 extruder: target=250 temp=250.0 pwm=0.424
Stats 789512.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=206961 bytes_read=213862 bytes_retransmit=9 bytes_invalid=0 send_seq=8275 receive_seq=8275 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993307 heater_bed: target=80 temp=80.1 pwm=0.399 sd_pos=24415 sysload=0.34 cputime=33.241 memavail=7295376 print_time=1047.686 buffer_time=3.051 print_stall=0 extruder: target=250 temp=250.2 pwm=0.236
Stats 789513.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=207178 bytes_read=214229 bytes_retransmit=9 bytes_invalid=0 send_seq=8290 receive_seq=8290 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993290 heater_bed: target=80 temp=80.1 pwm=0.435 sd_pos=24415 sysload=0.34 cputime=33.288 memavail=7295536 print_time=1047.686 buffer_time=2.051 print_stall=0 extruder: target=250 temp=249.8 pwm=0.484
Stats 789514.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=208039 bytes_read=214627 bytes_retransmit=9 bytes_invalid=0 send_seq=8314 receive_seq=8314 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993277 heater_bed: target=80 temp=80.2 pwm=0.374 sd_pos=24473 sysload=0.34 cputime=33.334 memavail=7295632 print_time=1048.778 buffer_time=2.142 print_stall=0 extruder: target=250 temp=249.9 pwm=0.419
Stats 789515.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=208779 bytes_read=215025 bytes_retransmit=9 bytes_invalid=0 send_seq=8335 receive_seq=8335 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993263 heater_bed: target=80 temp=80.2 pwm=0.287 sd_pos=24532 sysload=0.34 cputime=33.385 memavail=7295408 print_time=1049.850 buffer_time=2.213 print_stall=0 extruder: target=250 temp=249.8 pwm=0.449
Stats 789516.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=209662 bytes_read=215442 bytes_retransmit=9 bytes_invalid=0 send_seq=8360 receive_seq=8360 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993280 heater_bed: target=80 temp=80.2 pwm=0.381 sd_pos=24590 sysload=0.34 cputime=33.437 memavail=7295408 print_time=1050.905 buffer_time=2.268 print_stall=0 extruder: target=250 temp=249.9 pwm=0.387
Stats 789517.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=210438 bytes_read=215845 bytes_retransmit=9 bytes_invalid=0 send_seq=8382 receive_seq=8382 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993265 heater_bed: target=80 temp=80.2 pwm=0.381 sd_pos=24648 sysload=0.32 cputime=33.486 memavail=7295156 print_time=1051.942 buffer_time=2.304 print_stall=0 extruder: target=250 temp=250.0 pwm=0.378
Stats 789518.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=211295 bytes_read=216258 bytes_retransmit=9 bytes_invalid=0 send_seq=8406 receive_seq=8406 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993254 heater_bed: target=80 temp=80.2 pwm=0.476 sd_pos=24707 sysload=0.32 cputime=33.536 memavail=7295156 print_time=1052.962 buffer_time=2.324 print_stall=0 extruder: target=250 temp=249.8 pwm=0.410
Stats 789519.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=212115 bytes_read=216670 bytes_retransmit=9 bytes_invalid=0 send_seq=8430 receive_seq=8430 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993240 heater_bed: target=80 temp=80.2 pwm=0.509 sd_pos=24766 sysload=0.32 cputime=33.588 memavail=7295156 print_time=1053.967 buffer_time=2.328 print_stall=0 extruder: target=250 temp=250.1 pwm=0.288
Stats 789520.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=212925 bytes_read=217058 bytes_retransmit=9 bytes_invalid=0 send_seq=8452 receive_seq=8452 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993230 heater_bed: target=80 temp=80.2 pwm=0.390 sd_pos=24824 sysload=0.32 cputime=33.641 memavail=7295156 print_time=1054.962 buffer_time=2.323 print_stall=0 extruder: target=250 temp=250.0 pwm=0.364
Stats 789521.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=213726 bytes_read=217466 bytes_retransmit=9 bytes_invalid=0 send_seq=8475 receive_seq=8475 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993221 heater_bed: target=80 temp=80.1 pwm=0.484 sd_pos=24881 sysload=0.32 cputime=33.691 memavail=7294180 print_time=1055.943 buffer_time=2.304 print_stall=0 extruder: target=250 temp=250.1 pwm=0.291
Stats 789522.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=214519 bytes_read=217888 bytes_retransmit=9 bytes_invalid=0 send_seq=8498 receive_seq=8498 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993211 heater_bed: target=80 temp=80.2 pwm=0.412 sd_pos=24968 sysload=0.29 cputime=33.739 memavail=7294180 print_time=1056.940 buffer_time=2.301 print_stall=0 extruder: target=250 temp=249.9 pwm=0.390
Stats 789523.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=215286 bytes_read=218271 bytes_retransmit=9 bytes_invalid=0 send_seq=8519 receive_seq=8519 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993200 heater_bed: target=80 temp=80.2 pwm=0.412 sd_pos=25027 sysload=0.29 cputime=33.787 memavail=7294180 print_time=1057.880 buffer_time=2.240 print_stall=0 extruder: target=250 temp=250.0 pwm=0.303
Stats 789524.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=216080 bytes_read=218684 bytes_retransmit=9 bytes_invalid=0 send_seq=8543 receive_seq=8543 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993198 heater_bed: target=80 temp=80.2 pwm=0.434 sd_pos=25096 sysload=0.29 cputime=33.840 memavail=7294180 print_time=1058.839 buffer_time=2.198 print_stall=0 extruder: target=250 temp=249.9 pwm=0.382
Stats 789525.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=216882 bytes_read=219096 bytes_retransmit=9 bytes_invalid=0 send_seq=8567 receive_seq=8567 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993196 heater_bed: target=80 temp=80.1 pwm=0.434 sd_pos=25155 sysload=0.29 cputime=33.898 memavail=7294180 print_time=1059.786 buffer_time=2.145 print_stall=0 extruder: target=250 temp=250.1 pwm=0.264
Stats 789526.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=217713 bytes_read=219489 bytes_retransmit=9 bytes_invalid=0 send_seq=8590 receive_seq=8590 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993190 heater_bed: target=80 temp=80.2 pwm=0.407 sd_pos=25214 sysload=0.29 cputime=33.962 memavail=7294180 print_time=1060.730 buffer_time=2.089 print_stall=0 extruder: target=250 temp=250.0 pwm=0.320
Stats 789527.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=218480 bytes_read=219902 bytes_retransmit=9 bytes_invalid=0 send_seq=8611 receive_seq=8611 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993186 heater_bed: target=80 temp=80.1 pwm=0.458 sd_pos=25301 sysload=0.27 cputime=34.024 memavail=7294180 print_time=1061.667 buffer_time=2.025 print_stall=0 extruder: target=250 temp=249.9 pwm=0.370
Stats 789528.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=219895 bytes_read=220354 bytes_retransmit=9 bytes_invalid=0 send_seq=8643 receive_seq=8643 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993180 heater_bed: target=80 temp=80.2 pwm=0.391 sd_pos=25418 sysload=0.27 cputime=34.083 memavail=7294180 print_time=1063.536 buffer_time=2.892 print_stall=0 extruder: target=250 temp=250.2 pwm=0.263
Stats 789529.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=220680 bytes_read=220737 bytes_retransmit=9 bytes_invalid=0 send_seq=8664 receive_seq=8664 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119993177 heater_bed: target=80 temp=80.2 pwm=0.310 sd_pos=25477 sysload=0.27 cputime=34.146 memavail=7294180 print_time=1064.470 buffer_time=2.826 print_stall=0 extruder: target=250 temp=250.1 pwm=0.335
Stats 789530.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=221524 bytes_read=221150 bytes_retransmit=9 bytes_invalid=0 send_seq=8688 receive_seq=8688 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993169 heater_bed: target=80 temp=80.2 pwm=0.404 sd_pos=25536 sysload=0.27 cputime=34.208 memavail=7294180 print_time=1065.403 buffer_time=2.759 print_stall=0 extruder: target=250 temp=249.8 pwm=0.465
Stats 789531.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=222362 bytes_read=221567 bytes_retransmit=9 bytes_invalid=0 send_seq=8713 receive_seq=8713 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993163 heater_bed: target=80 temp=80.2 pwm=0.307 sd_pos=25595 sysload=0.27 cputime=34.271 memavail=7293428 print_time=1066.337 buffer_time=2.692 print_stall=0 extruder: target=250 temp=249.9 pwm=0.339
Stats 789532.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=223196 bytes_read=221980 bytes_retransmit=9 bytes_invalid=0 send_seq=8737 receive_seq=8737 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993155 heater_bed: target=80 temp=80.2 pwm=0.382 sd_pos=25676 sysload=0.25 cputime=34.335 memavail=7293428 print_time=1067.271 buffer_time=2.626 print_stall=0 extruder: target=250 temp=249.7 pwm=0.408
Stats 789533.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=223992 bytes_read=222388 bytes_retransmit=9 bytes_invalid=0 send_seq=8760 receive_seq=8760 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993150 heater_bed: target=80 temp=80.2 pwm=0.393 sd_pos=25735 sysload=0.25 cputime=34.389 memavail=7293204 print_time=1068.205 buffer_time=2.559 print_stall=0 extruder: target=250 temp=250.5 pwm=0.079
Stats 789534.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=224786 bytes_read=222790 bytes_retransmit=9 bytes_invalid=0 send_seq=8782 receive_seq=8782 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993177 heater_bed: target=80 temp=80.2 pwm=0.393 sd_pos=25793 sysload=0.25 cputime=34.447 memavail=7293204 print_time=1069.139 buffer_time=2.493 print_stall=0 extruder: target=250 temp=250.3 pwm=0.276
Stats 789535.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=225578 bytes_read=223183 bytes_retransmit=9 bytes_invalid=0 send_seq=8805 receive_seq=8805 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993169 heater_bed: target=80 temp=80.2 pwm=0.393 sd_pos=25851 sysload=0.25 cputime=34.515 memavail=7293204 print_time=1070.073 buffer_time=2.426 print_stall=0 extruder: target=250 temp=249.9 pwm=0.439
Stats 789536.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=226346 bytes_read=223586 bytes_retransmit=9 bytes_invalid=0 send_seq=8827 receive_seq=8827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993162 heater_bed: target=80 temp=80.2 pwm=0.397 sd_pos=25910 sysload=0.25 cputime=34.575 memavail=7293204 print_time=1071.007 buffer_time=2.359 print_stall=0 extruder: target=250 temp=250.0 pwm=0.345
Stats 789537.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=227181 bytes_read=224018 bytes_retransmit=9 bytes_invalid=0 send_seq=8852 receive_seq=8852 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993156 heater_bed: target=80 temp=80.2 pwm=0.330 sd_pos=25968 sysload=0.23 cputime=34.645 memavail=7292848 print_time=1071.941 buffer_time=2.293 print_stall=0 extruder: target=250 temp=249.7 pwm=0.415
Stats 789538.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=227951 bytes_read=224401 bytes_retransmit=9 bytes_invalid=0 send_seq=8873 receive_seq=8873 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993181 heater_bed: target=80 temp=80.2 pwm=0.435 sd_pos=26026 sysload=0.23 cputime=34.706 memavail=7292928 print_time=1072.875 buffer_time=2.226 print_stall=0 extruder: target=250 temp=250.1 pwm=0.202
Stats 789539.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=228729 bytes_read=224804 bytes_retransmit=9 bytes_invalid=0 send_seq=8895 receive_seq=8895 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993174 heater_bed: target=80 temp=80.2 pwm=0.352 sd_pos=26085 sysload=0.23 cputime=34.754 memavail=7292928 print_time=1073.809 buffer_time=2.159 print_stall=0 extruder: target=250 temp=249.8 pwm=0.407
Stats 789540.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=229564 bytes_read=225216 bytes_retransmit=9 bytes_invalid=0 send_seq=8919 receive_seq=8919 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993169 heater_bed: target=80 temp=80.2 pwm=0.412 sd_pos=26144 sysload=0.23 cputime=34.820 memavail=7292928 print_time=1074.743 buffer_time=2.092 print_stall=0 extruder: target=250 temp=250.2 pwm=0.200
Stats 789541.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=230381 bytes_read=225599 bytes_retransmit=9 bytes_invalid=0 send_seq=8941 receive_seq=8941 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993163 heater_bed: target=80 temp=80.2 pwm=0.468 sd_pos=26203 sysload=0.23 cputime=34.878 memavail=7292428 print_time=1075.676 buffer_time=2.026 print_stall=0 extruder: target=250 temp=250.1 pwm=0.338
Stats 789542.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=231748 bytes_read=226064 bytes_retransmit=9 bytes_invalid=0 send_seq=8974 receive_seq=8974 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119993154 heater_bed: target=80 temp=80.2 pwm=0.414 sd_pos=26320 sysload=0.29 cputime=34.941 memavail=7292428 print_time=1077.544 buffer_time=2.892 print_stall=0 extruder: target=250 temp=249.9 pwm=0.400
Stats 789543.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=232544 bytes_read=226467 bytes_retransmit=9 bytes_invalid=0 send_seq=8997 receive_seq=8997 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993154 heater_bed: target=80 temp=80.2 pwm=0.364 sd_pos=26379 sysload=0.29 cputime=34.996 memavail=7292428 print_time=1078.478 buffer_time=2.825 print_stall=0 extruder: target=250 temp=250.0 pwm=0.307
Stats 789544.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=233344 bytes_read=226855 bytes_retransmit=9 bytes_invalid=0 send_seq=9019 receive_seq=9019 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993143 heater_bed: target=80 temp=80.2 pwm=0.364 sd_pos=26438 sysload=0.29 cputime=35.051 memavail=7292428 print_time=1079.412 buffer_time=2.758 print_stall=0 extruder: target=250 temp=249.8 pwm=0.367
Stats 789545.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=234218 bytes_read=227273 bytes_retransmit=9 bytes_invalid=0 send_seq=9044 receive_seq=9044 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993134 heater_bed: target=80 temp=80.2 pwm=0.331 sd_pos=26495 sysload=0.29 cputime=35.112 memavail=7292428 print_time=1080.346 buffer_time=2.691 print_stall=0 extruder: target=250 temp=250.0 pwm=0.290
Stats 789546.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=235056 bytes_read=227685 bytes_retransmit=9 bytes_invalid=0 send_seq=9068 receive_seq=9068 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993142 heater_bed: target=80 temp=80.2 pwm=0.425 sd_pos=26554 sysload=0.29 cputime=35.170 memavail=7292428 print_time=1081.280 buffer_time=2.624 print_stall=0 extruder: target=250 temp=250.0 pwm=0.283
Stats 789547.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=235882 bytes_read=228098 bytes_retransmit=9 bytes_invalid=0 send_seq=9092 receive_seq=9092 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993140 heater_bed: target=80 temp=80.2 pwm=0.336 sd_pos=26613 sysload=0.26 cputime=35.227 memavail=7292428 print_time=1082.214 buffer_time=2.557 print_stall=0 extruder: target=250 temp=250.1 pwm=0.251
Stats 789548.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=236680 bytes_read=228506 bytes_retransmit=9 bytes_invalid=0 send_seq=9115 receive_seq=9115 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993135 heater_bed: target=80 temp=80.2 pwm=0.449 sd_pos=26672 sysload=0.26 cputime=35.279 memavail=7292428 print_time=1083.148 buffer_time=2.491 print_stall=0 extruder: target=250 temp=250.2 pwm=0.225
Stats 789549.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=237508 bytes_read=228928 bytes_retransmit=9 bytes_invalid=0 send_seq=9141 receive_seq=9141 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993131 heater_bed: target=80 temp=80.2 pwm=0.398 sd_pos=26731 sysload=0.26 cputime=35.331 memavail=7292428 print_time=1084.081 buffer_time=2.424 print_stall=0 extruder: target=250 temp=249.8 pwm=0.434
Stats 789550.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=238298 bytes_read=229316 bytes_retransmit=9 bytes_invalid=0 send_seq=9163 receive_seq=9163 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993127 heater_bed: target=80 temp=80.2 pwm=0.398 sd_pos=26789 sysload=0.26 cputime=35.384 memavail=7292428 print_time=1085.015 buffer_time=2.357 print_stall=0 extruder: target=250 temp=250.0 pwm=0.297
Stats 789551.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=239131 bytes_read=229748 bytes_retransmit=9 bytes_invalid=0 send_seq=9188 receive_seq=9188 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119993137 heater_bed: target=80 temp=80.2 pwm=0.398 sd_pos=26848 sysload=0.26 cputime=35.440 memavail=7292432 print_time=1085.949 buffer_time=2.290 print_stall=0 extruder: target=250 temp=249.9 pwm=0.384
Stats 789552.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=239952 bytes_read=230161 bytes_retransmit=9 bytes_invalid=0 send_seq=9212 receive_seq=9212 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993162 heater_bed: target=80 temp=80.2 pwm=0.286 sd_pos=26907 sysload=0.24 cputime=35.495 memavail=7292432 print_time=1086.883 buffer_time=2.223 print_stall=0 extruder: target=250 temp=250.2 pwm=0.242
Stats 789553.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=240746 bytes_read=230554 bytes_retransmit=9 bytes_invalid=0 send_seq=9235 receive_seq=9235 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993159 heater_bed: target=80 temp=80.2 pwm=0.363 sd_pos=26965 sysload=0.24 cputime=35.550 memavail=7292432 print_time=1087.817 buffer_time=2.156 print_stall=0 extruder: target=250 temp=249.9 pwm=0.399
Stats 789554.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=241603 bytes_read=230991 bytes_retransmit=9 bytes_invalid=0 send_seq=9261 receive_seq=9261 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993153 heater_bed: target=80 temp=80.2 pwm=0.293 sd_pos=27023 sysload=0.24 cputime=35.602 memavail=7292684 print_time=1088.751 buffer_time=2.090 print_stall=0 extruder: target=250 temp=250.3 pwm=0.176
Stats 789555.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=242439 bytes_read=231410 bytes_retransmit=9 bytes_invalid=0 send_seq=9287 receive_seq=9287 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993181 heater_bed: target=80 temp=80.2 pwm=0.384 sd_pos=27082 sysload=0.24 cputime=35.653 memavail=7292684 print_time=1089.685 buffer_time=2.023 print_stall=0 extruder: target=250 temp=250.2 pwm=0.229
Stats 789556.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=243806 bytes_read=231843 bytes_retransmit=9 bytes_invalid=0 send_seq=9318 receive_seq=9318 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993177 heater_bed: target=80 temp=80.2 pwm=0.295 sd_pos=27200 sysload=0.24 cputime=35.709 memavail=7292236 print_time=1091.553 buffer_time=2.889 print_stall=0 extruder: target=250 temp=249.8 pwm=0.447
Stats 789557.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=244579 bytes_read=232280 bytes_retransmit=9 bytes_invalid=0 send_seq=9341 receive_seq=9341 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993183 heater_bed: target=80 temp=80.2 pwm=0.279 sd_pos=27258 sysload=0.22 cputime=35.770 memavail=7292236 print_time=1092.487 buffer_time=2.821 print_stall=0 extruder: target=250 temp=250.0 pwm=0.301
Stats 789558.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=245414 bytes_read=232683 bytes_retransmit=9 bytes_invalid=0 send_seq=9366 receive_seq=9366 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993179 heater_bed: target=80 temp=80.2 pwm=0.378 sd_pos=27314 sysload=0.22 cputime=35.827 memavail=7292236 print_time=1093.420 buffer_time=2.752 print_stall=0 extruder: target=250 temp=250.0 pwm=0.323
Stats 789559.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=246209 bytes_read=233071 bytes_retransmit=9 bytes_invalid=0 send_seq=9388 receive_seq=9388 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993177 heater_bed: target=80 temp=80.2 pwm=0.435 sd_pos=27373 sysload=0.22 cputime=35.883 memavail=7292236 print_time=1094.354 buffer_time=2.685 print_stall=0 extruder: target=250 temp=250.0 pwm=0.323
Stats 789560.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=247022 bytes_read=233498 bytes_retransmit=9 bytes_invalid=0 send_seq=9412 receive_seq=9412 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993233 heater_bed: target=80 temp=80.2 pwm=0.360 sd_pos=27432 sysload=0.22 cputime=35.941 memavail=7292236 print_time=1095.288 buffer_time=2.619 print_stall=0 extruder: target=250 temp=249.8 pwm=0.409
Stats 789561.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=247802 bytes_read=233881 bytes_retransmit=9 bytes_invalid=0 send_seq=9433 receive_seq=9433 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993222 heater_bed: target=80 temp=80.2 pwm=0.360 sd_pos=27511 sysload=0.22 cputime=35.993 memavail=7292016 print_time=1096.222 buffer_time=2.552 print_stall=0 extruder: target=250 temp=249.9 pwm=0.347
Stats 789562.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=248606 bytes_read=234294 bytes_retransmit=9 bytes_invalid=0 send_seq=9457 receive_seq=9457 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993213 heater_bed: target=80 temp=80.2 pwm=0.372 sd_pos=27570 sysload=0.21 cputime=36.044 memavail=7292016 print_time=1097.156 buffer_time=2.486 print_stall=0 extruder: target=250 temp=249.9 pwm=0.362
Stats 789563.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=249437 bytes_read=234721 bytes_retransmit=9 bytes_invalid=0 send_seq=9481 receive_seq=9481 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993207 heater_bed: target=80 temp=80.2 pwm=0.393 sd_pos=27629 sysload=0.21 cputime=36.105 memavail=7292016 print_time=1098.090 buffer_time=2.419 print_stall=0 extruder: target=250 temp=250.2 pwm=0.221
Stats 789564.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=250268 bytes_read=235124 bytes_retransmit=9 bytes_invalid=0 send_seq=9506 receive_seq=9506 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993237 heater_bed: target=80 temp=80.2 pwm=0.339 sd_pos=27688 sysload=0.21 cputime=36.159 memavail=7292016 print_time=1099.024 buffer_time=2.353 print_stall=0 extruder: target=250 temp=250.1 pwm=0.263
Stats 789565.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=251045 bytes_read=235507 bytes_retransmit=9 bytes_invalid=0 send_seq=9527 receive_seq=9527 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993228 heater_bed: target=80 temp=80.2 pwm=0.418 sd_pos=27747 sysload=0.21 cputime=36.215 memavail=7292016 print_time=1099.958 buffer_time=2.286 print_stall=0 extruder: target=250 temp=250.3 pwm=0.172
Stats 789566.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=251842 bytes_read=235934 bytes_retransmit=9 bytes_invalid=0 send_seq=9551 receive_seq=9551 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993218 heater_bed: target=80 temp=80.2 pwm=0.267 sd_pos=27803 sysload=0.21 cputime=36.266 memavail=7292016 print_time=1100.892 buffer_time=2.220 print_stall=0 extruder: target=250 temp=250.1 pwm=0.313
Stats 789567.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=252692 bytes_read=236357 bytes_retransmit=9 bytes_invalid=0 send_seq=9577 receive_seq=9577 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993215 heater_bed: target=80 temp=80.2 pwm=0.254 sd_pos=27862 sysload=0.19 cputime=36.328 memavail=7292524 print_time=1101.825 buffer_time=2.153 print_stall=0 extruder: target=250 temp=250.0 pwm=0.357
Stats 789568.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=253456 bytes_read=236740 bytes_retransmit=9 bytes_invalid=0 send_seq=9598 receive_seq=9598 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993212 heater_bed: target=80 temp=80.2 pwm=0.311 sd_pos=27921 sysload=0.19 cputime=36.388 memavail=7292524 print_time=1102.759 buffer_time=2.087 print_stall=0 extruder: target=250 temp=250.0 pwm=0.357
Stats 789569.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=254242 bytes_read=237157 bytes_retransmit=9 bytes_invalid=0 send_seq=9620 receive_seq=9620 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993203 heater_bed: target=80 temp=80.3 pwm=0.311 sd_pos=27979 sysload=0.19 cputime=36.443 memavail=7292524 print_time=1103.693 buffer_time=2.020 print_stall=0 extruder: target=250 temp=249.8 pwm=0.355
Stats 789570.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=255630 bytes_read=237600 bytes_retransmit=9 bytes_invalid=0 send_seq=9653 receive_seq=9653 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993193 heater_bed: target=80 temp=80.2 pwm=0.366 sd_pos=28096 sysload=0.19 cputime=36.492 memavail=7292524 print_time=1105.561 buffer_time=2.887 print_stall=0 extruder: target=250 temp=250.2 pwm=0.283
Stats 789571.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=256341 bytes_read=237978 bytes_retransmit=9 bytes_invalid=0 send_seq=9673 receive_seq=9673 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993184 heater_bed: target=80 temp=80.2 pwm=0.366 sd_pos=28166 sysload=0.19 cputime=36.536 memavail=7293028 print_time=1106.495 buffer_time=2.820 print_stall=0 extruder: target=250 temp=250.0 pwm=0.335
Stats 789572.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=257118 bytes_read=238410 bytes_retransmit=9 bytes_invalid=0 send_seq=9695 receive_seq=9695 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993179 heater_bed: target=80 temp=80.3 pwm=0.283 sd_pos=28223 sysload=0.17 cputime=36.588 memavail=7293028 print_time=1107.429 buffer_time=2.753 print_stall=0 extruder: target=250 temp=250.2 pwm=0.238
Stats 789573.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=257890 bytes_read=238803 bytes_retransmit=9 bytes_invalid=0 send_seq=9718 receive_seq=9718 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993213 heater_bed: target=80 temp=80.2 pwm=0.365 sd_pos=28282 sysload=0.17 cputime=36.637 memavail=7293028 print_time=1108.363 buffer_time=2.686 print_stall=0 extruder: target=250 temp=249.9 pwm=0.420
Stats 789574.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=258706 bytes_read=239201 bytes_retransmit=9 bytes_invalid=0 send_seq=9742 receive_seq=9742 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993204 heater_bed: target=80 temp=80.2 pwm=0.375 sd_pos=28338 sysload=0.17 cputime=36.688 memavail=7293028 print_time=1109.297 buffer_time=2.619 print_stall=0 extruder: target=250 temp=250.1 pwm=0.301
Stats 789575.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=259447 bytes_read=239618 bytes_retransmit=9 bytes_invalid=0 send_seq=9764 receive_seq=9764 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993199 heater_bed: target=80 temp=80.2 pwm=0.544 sd_pos=28397 sysload=0.17 cputime=36.739 memavail=7293028 print_time=1110.230 buffer_time=2.553 print_stall=0 extruder: target=250 temp=250.1 pwm=0.274
Stats 789576.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=260219 bytes_read=240011 bytes_retransmit=9 bytes_invalid=0 send_seq=9787 receive_seq=9787 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993194 heater_bed: target=80 temp=80.2 pwm=0.344 sd_pos=28454 sysload=0.17 cputime=36.784 memavail=7293028 print_time=1111.164 buffer_time=2.486 print_stall=0 extruder: target=250 temp=249.9 pwm=0.409
Stats 789577.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=260967 bytes_read=240416 bytes_retransmit=9 bytes_invalid=0 send_seq=9808 receive_seq=9808 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993188 heater_bed: target=80 temp=80.2 pwm=0.408 sd_pos=28511 sysload=0.16 cputime=36.835 memavail=7293028 print_time=1112.098 buffer_time=2.419 print_stall=0 extruder: target=250 temp=249.7 pwm=0.448
Stats 789578.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=261780 bytes_read=240825 bytes_retransmit=9 bytes_invalid=0 send_seq=9833 receive_seq=9833 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993181 heater_bed: target=80 temp=80.2 pwm=0.360 sd_pos=28568 sysload=0.16 cputime=36.887 memavail=7293028 print_time=1113.032 buffer_time=2.352 print_stall=0 extruder: target=250 temp=249.9 pwm=0.333
Stats 789579.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=262521 bytes_read=241207 bytes_retransmit=9 bytes_invalid=0 send_seq=9854 receive_seq=9854 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993174 heater_bed: target=80 temp=80.2 pwm=0.360 sd_pos=28627 sysload=0.16 cputime=36.937 memavail=7293028 print_time=1113.966 buffer_time=2.285 print_stall=0 extruder: target=250 temp=250.2 pwm=0.264
Stats 789580.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=264217 bytes_read=241685 bytes_retransmit=9 bytes_invalid=0 send_seq=9891 receive_seq=9891 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993168 heater_bed: target=80 temp=80.2 pwm=0.360 sd_pos=28794 sysload=0.16 cputime=36.998 memavail=7293028 print_time=1115.213 buffer_time=2.531 print_stall=0 extruder: target=250 temp=250.4 pwm=0.138
Stats 789581.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=265052 bytes_read=242097 bytes_retransmit=9 bytes_invalid=0 send_seq=9915 receive_seq=9915 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993169 heater_bed: target=80 temp=80.2 pwm=0.360 sd_pos=28850 sysload=0.16 cputime=37.053 memavail=7292024 print_time=1116.161 buffer_time=2.479 print_stall=0 extruder: target=250 temp=250.1 pwm=0.279
Stats 789582.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=266113 bytes_read=242535 bytes_retransmit=9 bytes_invalid=0 send_seq=9944 receive_seq=9944 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993164 heater_bed: target=80 temp=80.2 pwm=0.281 sd_pos=28989 sysload=0.15 cputime=37.108 memavail=7292024 print_time=1117.209 buffer_time=2.526 print_stall=0 extruder: target=250 temp=249.8 pwm=0.432
Stats 789583.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=266799 bytes_read=242933 bytes_retransmit=9 bytes_invalid=0 send_seq=9965 receive_seq=9965 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993155 heater_bed: target=80 temp=80.2 pwm=0.340 sd_pos=29046 sysload=0.15 cputime=37.160 memavail=7292024 print_time=1118.200 buffer_time=2.516 print_stall=0 extruder: target=250 temp=249.8 pwm=0.407
Stats 789584.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=268768 bytes_read=243440 bytes_retransmit=9 bytes_invalid=0 send_seq=10008 receive_seq=10008 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993153 heater_bed: target=80 temp=80.2 pwm=0.400 sd_pos=29276 sysload=0.15 cputime=37.216 memavail=7292024 print_time=1119.665 buffer_time=2.981 print_stall=0 extruder: target=250 temp=250.1 pwm=0.263
Stats 789585.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=269572 bytes_read=243838 bytes_retransmit=9 bytes_invalid=0 send_seq=10032 receive_seq=10032 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993146 heater_bed: target=80 temp=80.2 pwm=0.256 sd_pos=29345 sysload=0.15 cputime=37.260 memavail=7292184 print_time=1120.586 buffer_time=2.901 print_stall=0 extruder: target=250 temp=250.1 pwm=0.335
Stats 789586.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=271368 bytes_read=244326 bytes_retransmit=9 bytes_invalid=0 send_seq=10071 receive_seq=10071 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119993138 heater_bed: target=80 temp=80.2 pwm=0.412 sd_pos=29512 sysload=0.15 cputime=37.319 memavail=7292280 print_time=1121.928 buffer_time=3.243 print_stall=0 extruder: target=250 temp=250.1 pwm=0.335
Stats 789587.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=271609 bytes_read=244708 bytes_retransmit=9 bytes_invalid=0 send_seq=10086 receive_seq=10086 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993135 heater_bed: target=80 temp=80.2 pwm=0.332 sd_pos=29512 sysload=0.13 cputime=37.371 memavail=7292280 print_time=1121.928 buffer_time=2.242 print_stall=0 extruder: target=250 temp=250.1 pwm=0.288
Stats 789588.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=272424 bytes_read=245101 bytes_retransmit=9 bytes_invalid=0 send_seq=10109 receive_seq=10109 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993134 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=29569 sysload=0.13 cputime=37.419 memavail=7292280 print_time=1122.876 buffer_time=2.190 print_stall=0 extruder: target=250 temp=250.2 pwm=0.288
Stats 789589.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=273528 bytes_read=245524 bytes_retransmit=9 bytes_invalid=0 send_seq=10135 receive_seq=10135 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993131 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=29710 sysload=0.13 cputime=37.468 memavail=7292280 print_time=1124.026 buffer_time=2.338 print_stall=0 extruder: target=250 temp=249.9 pwm=0.390
Stats 789590.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=274167 bytes_read=245911 bytes_retransmit=9 bytes_invalid=0 send_seq=10154 receive_seq=10154 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993128 heater_bed: target=80 temp=80.1 pwm=0.346 sd_pos=29791 sysload=0.13 cputime=37.513 memavail=7292280 print_time=1125.016 buffer_time=2.328 print_stall=0 extruder: target=250 temp=249.7 pwm=0.472
Stats 789591.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=275567 bytes_read=246354 bytes_retransmit=9 bytes_invalid=0 send_seq=10187 receive_seq=10187 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993173 heater_bed: target=80 temp=80.2 pwm=0.274 sd_pos=29913 sysload=0.13 cputime=37.567 memavail=7291780 print_time=1126.418 buffer_time=2.730 print_stall=0 extruder: target=250 temp=250.2 pwm=0.297
Stats 789592.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=276712 bytes_read=246802 bytes_retransmit=9 bytes_invalid=0 send_seq=10215 receive_seq=10215 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993166 heater_bed: target=80 temp=80.1 pwm=0.327 sd_pos=30022 sysload=0.12 cputime=37.622 memavail=7291780 print_time=1126.787 buffer_time=2.098 print_stall=0 extruder: target=250 temp=250.3 pwm=0.187
Stats 789593.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=277563 bytes_read=247209 bytes_retransmit=9 bytes_invalid=0 send_seq=10238 receive_seq=10238 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993160 heater_bed: target=80 temp=80.2 pwm=0.229 sd_pos=30081 sysload=0.12 cputime=37.673 memavail=7291780 print_time=1127.708 buffer_time=2.018 print_stall=0 extruder: target=250 temp=250.1 pwm=0.318
Stats 789594.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=278812 bytes_read=247632 bytes_retransmit=9 bytes_invalid=0 send_seq=10267 receive_seq=10267 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993156 heater_bed: target=80 temp=80.1 pwm=0.412 sd_pos=30196 sysload=0.12 cputime=37.723 memavail=7291780 print_time=1129.497 buffer_time=2.807 print_stall=0 extruder: target=250 temp=250.2 pwm=0.260
Stats 789595.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=280571 bytes_read=248115 bytes_retransmit=9 bytes_invalid=0 send_seq=10305 receive_seq=10305 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119993155 heater_bed: target=80 temp=80.2 pwm=0.324 sd_pos=30363 sysload=0.12 cputime=37.778 memavail=7291780 print_time=1130.704 buffer_time=3.014 print_stall=0 extruder: target=250 temp=250.0 pwm=0.309
Stats 789596.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=280841 bytes_read=248487 bytes_retransmit=9 bytes_invalid=0 send_seq=10321 receive_seq=10321 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993155 heater_bed: target=80 temp=80.2 pwm=0.225 sd_pos=30363 sysload=0.12 cputime=37.831 memavail=7291780 print_time=1130.704 buffer_time=2.013 print_stall=0 extruder: target=250 temp=249.9 pwm=0.401
Stats 789597.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=281673 bytes_read=248895 bytes_retransmit=9 bytes_invalid=0 send_seq=10344 receive_seq=10344 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993150 heater_bed: target=80 temp=80.2 pwm=0.331 sd_pos=30449 sysload=0.19 cputime=37.884 memavail=7291780 print_time=1131.652 buffer_time=1.961 print_stall=0 extruder: target=250 temp=250.2 pwm=0.217
Stats 789598.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=282657 bytes_read=249313 bytes_retransmit=9 bytes_invalid=0 send_seq=10369 receive_seq=10369 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993145 heater_bed: target=80 temp=80.2 pwm=0.331 sd_pos=30557 sysload=0.19 cputime=37.937 memavail=7291704 print_time=1132.700 buffer_time=2.009 print_stall=0 extruder: target=250 temp=249.9 pwm=0.402
Stats 789599.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=283375 bytes_read=249715 bytes_retransmit=9 bytes_invalid=0 send_seq=10391 receive_seq=10391 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993139 heater_bed: target=80 temp=80.2 pwm=0.372 sd_pos=30614 sysload=0.19 cputime=37.990 memavail=7291704 print_time=1133.691 buffer_time=1.999 print_stall=0 extruder: target=250 temp=250.2 pwm=0.257
Stats 789600.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=285369 bytes_read=250203 bytes_retransmit=9 bytes_invalid=0 send_seq=10433 receive_seq=10433 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993134 heater_bed: target=80 temp=80.2 pwm=0.297 sd_pos=30842 sysload=0.19 cputime=38.050 memavail=7291704 print_time=1135.156 buffer_time=2.463 print_stall=0 extruder: target=250 temp=250.0 pwm=0.388
Stats 789601.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=286153 bytes_read=250611 bytes_retransmit=9 bytes_invalid=0 send_seq=10456 receive_seq=10456 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993154 heater_bed: target=80 temp=80.2 pwm=0.328 sd_pos=30898 sysload=0.19 cputime=38.116 memavail=7291520 print_time=1136.077 buffer_time=2.384 print_stall=0 extruder: target=250 temp=250.0 pwm=0.359
Stats 789602.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=288563 bytes_read=251163 bytes_retransmit=9 bytes_invalid=0 send_seq=10505 receive_seq=10505 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993150 heater_bed: target=80 temp=80.2 pwm=0.328 sd_pos=31410 sysload=0.18 cputime=38.190 memavail=7291520 print_time=1137.470 buffer_time=2.776 print_stall=0 extruder: target=240 temp=249.7 pwm=0.000
Stats 789603.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=289439 bytes_read=251556 bytes_retransmit=9 bytes_invalid=0 send_seq=10528 receive_seq=10528 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993145 heater_bed: target=80 temp=80.2 pwm=0.328 sd_pos=31495 sysload=0.18 cputime=38.252 memavail=7291528 print_time=1140.830 buffer_time=5.135 print_stall=0 extruder: target=240 temp=249.7 pwm=0.000
Stats 789604.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=289657 bytes_read=251909 bytes_retransmit=9 bytes_invalid=0 send_seq=10540 receive_seq=10540 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993144 heater_bed: target=80 temp=80.2 pwm=0.304 sd_pos=31495 sysload=0.18 cputime=38.296 memavail=7291528 print_time=1140.830 buffer_time=4.135 print_stall=0 extruder: target=240 temp=249.3 pwm=0.000
Stats 789605.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=289835 bytes_read=252266 bytes_retransmit=9 bytes_invalid=0 send_seq=10553 receive_seq=10553 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993137 heater_bed: target=80 temp=80.1 pwm=0.483 sd_pos=31495 sysload=0.18 cputime=38.351 memavail=7291528 print_time=1140.830 buffer_time=3.134 print_stall=0 extruder: target=240 temp=248.1 pwm=0.000
Stats 789606.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=290019 bytes_read=252604 bytes_retransmit=9 bytes_invalid=0 send_seq=10565 receive_seq=10565 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993138 heater_bed: target=80 temp=80.1 pwm=0.375 sd_pos=31495 sysload=0.18 cputime=38.406 memavail=7291528 print_time=1140.830 buffer_time=2.133 print_stall=0 extruder: target=240 temp=247.5 pwm=0.000
Stats 789607.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=291290 bytes_read=253062 bytes_retransmit=9 bytes_invalid=0 send_seq=10595 receive_seq=10595 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119993132 heater_bed: target=80 temp=80.1 pwm=0.418 sd_pos=31605 sysload=0.16 cputime=38.479 memavail=7291528 print_time=1141.914 buffer_time=2.217 print_stall=0 extruder: target=240 temp=246.5 pwm=0.000
Stats 789608.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=291923 bytes_read=253454 bytes_retransmit=9 bytes_invalid=0 send_seq=10615 receive_seq=10615 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993128 heater_bed: target=80 temp=80.1 pwm=0.422 sd_pos=31749 sysload=0.16 cputime=38.540 memavail=7291528 print_time=1143.835 buffer_time=3.138 print_stall=0 extruder: target=240 temp=244.7 pwm=0.073
Stats 789609.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=292126 bytes_read=253802 bytes_retransmit=9 bytes_invalid=0 send_seq=10629 receive_seq=10629 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993127 heater_bed: target=80 temp=80.1 pwm=0.288 sd_pos=31749 sysload=0.16 cputime=38.594 memavail=7291528 print_time=1143.835 buffer_time=2.137 print_stall=0 extruder: target=240 temp=243.9 pwm=0.063
Stats 789610.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=292966 bytes_read=254200 bytes_retransmit=9 bytes_invalid=0 send_seq=10650 receive_seq=10650 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993127 heater_bed: target=80 temp=80.1 pwm=0.295 sd_pos=31921 sysload=0.16 cputime=38.662 memavail=7291528 print_time=1144.752 buffer_time=2.054 print_stall=0 extruder: target=240 temp=242.8 pwm=0.231
Stats 789611.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=295543 bytes_read=254757 bytes_retransmit=9 bytes_invalid=0 send_seq=10703 receive_seq=10703 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119993121 heater_bed: target=80 temp=80.1 pwm=0.228 sd_pos=32301 sysload=0.16 cputime=38.726 memavail=7292036 print_time=1146.605 buffer_time=2.906 print_stall=0 extruder: target=240 temp=241.4 pwm=0.307
Stats 789612.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=297030 bytes_read=255223 bytes_retransmit=9 bytes_invalid=0 send_seq=10738 receive_seq=10738 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119993118 heater_bed: target=80 temp=80.1 pwm=0.349 sd_pos=32475 sysload=0.15 cputime=38.789 memavail=7292036 print_time=1148.195 buffer_time=3.496 print_stall=0 extruder: target=240 temp=240.9 pwm=0.218
Stats 789613.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=297277 bytes_read=255573 bytes_retransmit=9 bytes_invalid=0 send_seq=10751 receive_seq=10751 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993121 heater_bed: target=80 temp=80.1 pwm=0.312 sd_pos=32475 sysload=0.15 cputime=38.839 memavail=7292036 print_time=1148.195 buffer_time=2.495 print_stall=0 extruder: target=240 temp=240.1 pwm=0.363
Stats 789614.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=297884 bytes_read=255957 bytes_retransmit=9 bytes_invalid=0 send_seq=10771 receive_seq=10771 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993120 heater_bed: target=80 temp=80.2 pwm=0.273 sd_pos=32561 sysload=0.15 cputime=38.894 memavail=7292036 print_time=1149.798 buffer_time=3.098 print_stall=0 extruder: target=240 temp=239.7 pwm=0.337
Stats 789615.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=298089 bytes_read=256304 bytes_retransmit=9 bytes_invalid=0 send_seq=10785 receive_seq=10785 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993118 heater_bed: target=80 temp=80.2 pwm=0.238 sd_pos=32561 sysload=0.15 cputime=38.950 memavail=7291812 print_time=1149.798 buffer_time=2.097 print_stall=0 extruder: target=240 temp=239.9 pwm=0.192
Stats 789616.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=298357 bytes_read=256662 bytes_retransmit=9 bytes_invalid=0 send_seq=10798 receive_seq=10798 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993117 heater_bed: target=80 temp=80.2 pwm=0.225 sd_pos=32588 sysload=0.15 cputime=39.004 memavail=7291100 print_time=1150.726 buffer_time=2.024 print_stall=0 extruder: target=240 temp=239.9 pwm=0.123
Stats 789617.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=299265 bytes_read=257094 bytes_retransmit=9 bytes_invalid=0 send_seq=10823 receive_seq=10823 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993114 heater_bed: target=80 temp=80.1 pwm=0.343 sd_pos=32588 sysload=0.14 cputime=39.056 memavail=7296088 print_time=1151.756 buffer_time=2.054 print_stall=0 extruder: target=240 temp=239.5 pwm=0.318
Stats 789618.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=299899 bytes_read=257488 bytes_retransmit=9 bytes_invalid=0 send_seq=10844 receive_seq=10844 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993111 heater_bed: target=80 temp=80.2 pwm=0.308 sd_pos=32756 sysload=0.14 cputime=39.117 memavail=7296088 print_time=1153.927 buffer_time=3.225 print_stall=0 extruder: target=240 temp=239.3 pwm=0.382
Stats 789619.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=300104 bytes_read=257851 bytes_retransmit=9 bytes_invalid=0 send_seq=10858 receive_seq=10858 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993106 heater_bed: target=80 temp=80.2 pwm=0.291 sd_pos=32756 sysload=0.14 cputime=39.157 memavail=7296088 print_time=1153.927 buffer_time=2.224 print_stall=0 extruder: target=240 temp=239.1 pwm=0.356
Stats 789620.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=301123 bytes_read=258273 bytes_retransmit=9 bytes_invalid=0 send_seq=10884 receive_seq=10884 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993103 heater_bed: target=80 temp=80.2 pwm=0.291 sd_pos=33044 sysload=0.14 cputime=39.213 memavail=7296088 print_time=1155.210 buffer_time=2.506 print_stall=0 extruder: target=240 temp=239.0 pwm=0.327
Stats 789621.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=302436 bytes_read=258716 bytes_retransmit=9 bytes_invalid=0 send_seq=10917 receive_seq=10917 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993106 heater_bed: target=80 temp=80.2 pwm=0.350 sd_pos=33190 sysload=0.14 cputime=39.275 memavail=7295332 print_time=1156.803 buffer_time=3.098 print_stall=0 extruder: target=240 temp=239.0 pwm=0.312
Stats 789622.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=302604 bytes_read=259079 bytes_retransmit=9 bytes_invalid=0 send_seq=10928 receive_seq=10928 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993161 heater_bed: target=80 temp=80.2 pwm=0.235 sd_pos=33190 sysload=0.13 cputime=39.325 memavail=7295332 print_time=1156.803 buffer_time=2.098 print_stall=0 extruder: target=240 temp=239.1 pwm=0.324
Stats 789623.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=303341 bytes_read=259486 bytes_retransmit=9 bytes_invalid=0 send_seq=10951 receive_seq=10951 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993156 heater_bed: target=80 temp=80.2 pwm=0.332 sd_pos=33304 sysload=0.13 cputime=39.380 memavail=7295332 print_time=1158.439 buffer_time=2.734 print_stall=0 extruder: target=240 temp=239.0 pwm=0.379
Stats 789624.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=303615 bytes_read=259829 bytes_retransmit=9 bytes_invalid=0 send_seq=10964 receive_seq=10964 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993153 heater_bed: target=80 temp=80.2 pwm=0.332 sd_pos=33332 sysload=0.13 cputime=39.437 memavail=7295108 print_time=1159.385 buffer_time=2.678 print_stall=0 extruder: target=240 temp=239.2 pwm=0.315
Stats 789625.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=304183 bytes_read=260212 bytes_retransmit=9 bytes_invalid=0 send_seq=10982 receive_seq=10982 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993149 heater_bed: target=80 temp=80.1 pwm=0.455 sd_pos=33332 sysload=0.13 cputime=39.493 memavail=7295364 print_time=1159.989 buffer_time=2.282 print_stall=0 extruder: target=240 temp=239.2 pwm=0.329
Stats 789626.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=304815 bytes_read=260609 bytes_retransmit=9 bytes_invalid=0 send_seq=11003 receive_seq=11003 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993148 heater_bed: target=80 temp=80.1 pwm=0.341 sd_pos=33332 sysload=0.13 cputime=39.545 memavail=7295364 print_time=1160.896 buffer_time=2.188 print_stall=0 extruder: target=240 temp=239.1 pwm=0.467
Stats 789627.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=305421 bytes_read=261007 bytes_retransmit=9 bytes_invalid=0 send_seq=11024 receive_seq=11024 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993166 heater_bed: target=80 temp=80.1 pwm=0.415 sd_pos=33477 sysload=0.12 cputime=39.610 memavail=7294628 print_time=1162.643 buffer_time=2.935 print_stall=0 extruder: target=240 temp=239.1 pwm=0.469
Stats 789628.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=305632 bytes_read=261365 bytes_retransmit=9 bytes_invalid=0 send_seq=11037 receive_seq=11037 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993162 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=33506 sysload=0.12 cputime=39.665 memavail=7294628 print_time=1162.643 buffer_time=1.934 print_stall=0 extruder: target=240 temp=239.1 pwm=0.474
Stats 789629.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=306982 bytes_read=261802 bytes_retransmit=9 bytes_invalid=0 send_seq=11066 receive_seq=11066 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993157 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=33742 sysload=0.12 cputime=39.731 memavail=7294628 print_time=1164.054 buffer_time=2.345 print_stall=0 extruder: target=240 temp=239.4 pwm=0.365
Stats 789630.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=309499 bytes_read=262330 bytes_retransmit=9 bytes_invalid=0 send_seq=11116 receive_seq=11116 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993154 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=34117 sysload=0.12 cputime=39.792 memavail=7294628 print_time=1165.269 buffer_time=2.559 print_stall=0 extruder: target=240 temp=239.3 pwm=0.425
Stats 789631.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=311849 bytes_read=262863 bytes_retransmit=9 bytes_invalid=0 send_seq=11164 receive_seq=11164 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993175 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=34301 sysload=0.12 cputime=39.861 memavail=7294884 print_time=1166.031 buffer_time=2.321 print_stall=0 extruder: target=240 temp=239.7 pwm=0.313
Stats 789632.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=313773 bytes_read=263370 bytes_retransmit=9 bytes_invalid=0 send_seq=11204 receive_seq=11204 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993167 heater_bed: target=80 temp=80.0 pwm=0.325 sd_pos=34459 sysload=0.11 cputime=39.924 memavail=7294884 print_time=1167.009 buffer_time=2.298 print_stall=0 extruder: target=240 temp=239.7 pwm=0.383
Stats 789633.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=315084 bytes_read=263793 bytes_retransmit=9 bytes_invalid=0 send_seq=11233 receive_seq=11233 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993169 heater_bed: target=80 temp=80.0 pwm=0.223 sd_pos=34567 sysload=0.11 cputime=39.978 memavail=7294884 print_time=1167.837 buffer_time=2.126 print_stall=0 extruder: target=240 temp=240.0 pwm=0.269
Stats 789634.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=316476 bytes_read=264241 bytes_retransmit=9 bytes_invalid=0 send_seq=11264 receive_seq=11264 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993171 heater_bed: target=80 temp=80.0 pwm=0.366 sd_pos=34687 sysload=0.11 cputime=40.031 memavail=7294888 print_time=1168.806 buffer_time=2.095 print_stall=0 extruder: target=240 temp=240.0 pwm=0.301
Stats 789635.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=317960 bytes_read=264723 bytes_retransmit=9 bytes_invalid=0 send_seq=11302 receive_seq=11302 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993171 heater_bed: target=80 temp=80.0 pwm=0.351 sd_pos=34794 sysload=0.11 cputime=40.088 memavail=7294888 print_time=1169.917 buffer_time=2.204 print_stall=0 extruder: target=240 temp=240.1 pwm=0.305
Stats 789636.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=319314 bytes_read=265151 bytes_retransmit=9 bytes_invalid=0 send_seq=11332 receive_seq=11332 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993231 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=34902 sysload=0.11 cputime=40.145 memavail=7294888 print_time=1171.168 buffer_time=2.456 print_stall=0 extruder: target=240 temp=240.1 pwm=0.305
Stats 789637.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=320214 bytes_read=265574 bytes_retransmit=9 bytes_invalid=0 send_seq=11355 receive_seq=11355 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993222 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=34957 sysload=0.10 cputime=40.201 memavail=7294888 print_time=1171.847 buffer_time=2.134 print_stall=0 extruder: target=240 temp=240.2 pwm=0.265
Stats 789638.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=321688 bytes_read=266041 bytes_retransmit=9 bytes_invalid=0 send_seq=11390 receive_seq=11390 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993214 heater_bed: target=80 temp=80.0 pwm=0.340 sd_pos=35066 sysload=0.10 cputime=40.251 memavail=7294888 print_time=1173.311 buffer_time=2.597 print_stall=0 extruder: target=240 temp=240.0 pwm=0.319
Stats 789639.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=322510 bytes_read=266434 bytes_retransmit=9 bytes_invalid=0 send_seq=11413 receive_seq=11413 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993210 heater_bed: target=80 temp=79.9 pwm=0.436 sd_pos=35121 sysload=0.10 cputime=40.302 memavail=7294888 print_time=1174.102 buffer_time=2.388 print_stall=0 extruder: target=240 temp=240.0 pwm=0.335
Stats 789640.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=323340 bytes_read=266837 bytes_retransmit=9 bytes_invalid=0 send_seq=11435 receive_seq=11435 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993203 heater_bed: target=80 temp=79.9 pwm=0.444 sd_pos=35176 sysload=0.10 cputime=40.361 memavail=7294888 print_time=1174.886 buffer_time=2.171 print_stall=0 extruder: target=240 temp=239.8 pwm=0.424
Stats 789641.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=324773 bytes_read=267299 bytes_retransmit=9 bytes_invalid=0 send_seq=11469 receive_seq=11469 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993195 heater_bed: target=80 temp=79.9 pwm=0.444 sd_pos=35287 sysload=0.10 cputime=40.426 memavail=7294388 print_time=1176.471 buffer_time=2.756 print_stall=0 extruder: target=240 temp=239.7 pwm=0.372
Stats 789642.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=325633 bytes_read=267707 bytes_retransmit=9 bytes_invalid=0 send_seq=11492 receive_seq=11492 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993187 heater_bed: target=80 temp=79.9 pwm=0.450 sd_pos=35343 sysload=0.17 cputime=40.483 memavail=7294388 print_time=1177.271 buffer_time=2.555 print_stall=0 extruder: target=240 temp=239.9 pwm=0.342
Stats 789643.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=326486 bytes_read=268115 bytes_retransmit=9 bytes_invalid=0 send_seq=11515 receive_seq=11515 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993184 heater_bed: target=80 temp=79.9 pwm=0.427 sd_pos=35398 sysload=0.17 cputime=40.540 memavail=7294388 print_time=1178.056 buffer_time=2.340 print_stall=0 extruder: target=240 temp=240.2 pwm=0.218
Stats 789644.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=327247 bytes_read=268512 bytes_retransmit=9 bytes_invalid=0 send_seq=11536 receive_seq=11536 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993178 heater_bed: target=80 temp=79.9 pwm=0.427 sd_pos=35453 sysload=0.17 cputime=40.591 memavail=7294388 print_time=1178.856 buffer_time=2.139 print_stall=0 extruder: target=240 temp=240.0 pwm=0.324
Stats 789645.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=328671 bytes_read=268950 bytes_retransmit=9 bytes_invalid=0 send_seq=11568 receive_seq=11568 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993173 heater_bed: target=80 temp=79.9 pwm=0.501 sd_pos=35564 sysload=0.17 cputime=40.653 memavail=7294388 print_time=1180.441 buffer_time=2.725 print_stall=0 extruder: target=240 temp=240.1 pwm=0.314
Stats 789646.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=329540 bytes_read=269353 bytes_retransmit=9 bytes_invalid=0 send_seq=11590 receive_seq=11590 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993167 heater_bed: target=80 temp=79.9 pwm=0.376 sd_pos=35643 sysload=0.17 cputime=40.719 memavail=7294388 print_time=1181.227 buffer_time=2.509 print_stall=0 extruder: target=240 temp=240.0 pwm=0.326
Stats 789647.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=330358 bytes_read=269775 bytes_retransmit=9 bytes_invalid=0 send_seq=11613 receive_seq=11613 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993162 heater_bed: target=80 temp=79.9 pwm=0.376 sd_pos=35698 sysload=0.16 cputime=40.778 memavail=7294388 print_time=1182.027 buffer_time=2.308 print_stall=0 extruder: target=240 temp=240.1 pwm=0.289
Stats 789648.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=331206 bytes_read=270171 bytes_retransmit=9 bytes_invalid=0 send_seq=11637 receive_seq=11637 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993155 heater_bed: target=80 temp=79.9 pwm=0.389 sd_pos=35753 sysload=0.16 cputime=40.833 memavail=7294388 print_time=1182.813 buffer_time=2.094 print_stall=0 extruder: target=240 temp=239.8 pwm=0.369
Stats 789649.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=332695 bytes_read=270621 bytes_retransmit=9 bytes_invalid=0 send_seq=11670 receive_seq=11670 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119993206 heater_bed: target=80 temp=79.9 pwm=0.385 sd_pos=35864 sysload=0.16 cputime=40.902 memavail=7294388 print_time=1184.398 buffer_time=2.679 print_stall=0 extruder: target=240 temp=240.1 pwm=0.261
Stats 789650.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=333600 bytes_read=271037 bytes_retransmit=9 bytes_invalid=0 send_seq=11696 receive_seq=11696 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993202 heater_bed: target=80 temp=79.9 pwm=0.356 sd_pos=35919 sysload=0.16 cputime=40.964 memavail=7294388 print_time=1185.198 buffer_time=2.478 print_stall=0 extruder: target=240 temp=240.0 pwm=0.356
Stats 789651.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=334479 bytes_read=271440 bytes_retransmit=9 bytes_invalid=0 send_seq=11721 receive_seq=11721 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993193 heater_bed: target=80 temp=79.9 pwm=0.460 sd_pos=35974 sysload=0.16 cputime=41.029 memavail=7294388 print_time=1185.983 buffer_time=2.263 print_stall=0 extruder: target=240 temp=240.3 pwm=0.215
Stats 789652.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=335320 bytes_read=271858 bytes_retransmit=9 bytes_invalid=0 send_seq=11743 receive_seq=11743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993192 heater_bed: target=80 temp=79.9 pwm=0.365 sd_pos=36030 sysload=0.14 cputime=41.091 memavail=7294388 print_time=1186.783 buffer_time=2.062 print_stall=0 extruder: target=240 temp=239.9 pwm=0.402
Stats 789653.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=336864 bytes_read=272325 bytes_retransmit=9 bytes_invalid=0 send_seq=11778 receive_seq=11778 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993187 heater_bed: target=80 temp=79.9 pwm=0.362 sd_pos=36140 sysload=0.14 cputime=41.152 memavail=7294136 print_time=1188.368 buffer_time=2.646 print_stall=0 extruder: target=240 temp=239.7 pwm=0.491
Stats 789654.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=337739 bytes_read=272723 bytes_retransmit=9 bytes_invalid=0 send_seq=11802 receive_seq=11802 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993180 heater_bed: target=80 temp=79.9 pwm=0.441 sd_pos=36195 sysload=0.14 cputime=41.208 memavail=7294136 print_time=1189.154 buffer_time=2.431 print_stall=0 extruder: target=240 temp=240.0 pwm=0.290
Stats 789655.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=338552 bytes_read=273126 bytes_retransmit=9 bytes_invalid=0 send_seq=11824 receive_seq=11824 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993174 heater_bed: target=80 temp=79.8 pwm=0.441 sd_pos=36250 sysload=0.14 cputime=41.271 memavail=7294136 print_time=1189.954 buffer_time=2.230 print_stall=0 extruder: target=240 temp=239.9 pwm=0.304
Stats 789656.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=339439 bytes_read=273548 bytes_retransmit=9 bytes_invalid=0 send_seq=11850 receive_seq=11850 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993171 heater_bed: target=80 temp=79.9 pwm=0.309 sd_pos=36306 sysload=0.14 cputime=41.329 memavail=7294136 print_time=1190.739 buffer_time=2.014 print_stall=0 extruder: target=240 temp=240.1 pwm=0.269
Stats 789657.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=340853 bytes_read=273996 bytes_retransmit=9 bytes_invalid=0 send_seq=11881 receive_seq=11881 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993167 heater_bed: target=80 temp=79.9 pwm=0.345 sd_pos=36416 sysload=0.13 cputime=41.400 memavail=7294208 print_time=1192.325 buffer_time=2.599 print_stall=0 extruder: target=240 temp=240.2 pwm=0.269
Stats 789658.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=341719 bytes_read=274399 bytes_retransmit=9 bytes_invalid=0 send_seq=11903 receive_seq=11903 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993160 heater_bed: target=80 temp=79.9 pwm=0.402 sd_pos=36471 sysload=0.13 cputime=41.457 memavail=7294392 print_time=1193.124 buffer_time=2.398 print_stall=0 extruder: target=240 temp=239.9 pwm=0.386
Stats 789659.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=342545 bytes_read=274806 bytes_retransmit=9 bytes_invalid=0 send_seq=11926 receive_seq=11926 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993155 heater_bed: target=80 temp=79.9 pwm=0.402 sd_pos=36527 sysload=0.13 cputime=41.506 memavail=7294392 print_time=1193.910 buffer_time=2.183 print_stall=0 extruder: target=240 temp=239.8 pwm=0.374
Stats 789660.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=343992 bytes_read=275244 bytes_retransmit=9 bytes_invalid=0 send_seq=11958 receive_seq=11958 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993150 heater_bed: target=80 temp=79.9 pwm=0.402 sd_pos=36637 sysload=0.13 cputime=41.563 memavail=7294392 print_time=1195.496 buffer_time=2.768 print_stall=0 extruder: target=240 temp=239.9 pwm=0.374
Stats 789661.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=344828 bytes_read=275657 bytes_retransmit=9 bytes_invalid=0 send_seq=11982 receive_seq=11982 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993145 heater_bed: target=80 temp=79.8 pwm=0.424 sd_pos=36692 sysload=0.13 cputime=41.632 memavail=7294144 print_time=1196.295 buffer_time=2.566 print_stall=0 extruder: target=240 temp=240.1 pwm=0.255
Stats 789662.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=345700 bytes_read=276084 bytes_retransmit=9 bytes_invalid=0 send_seq=12006 receive_seq=12006 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993143 heater_bed: target=80 temp=79.8 pwm=0.532 sd_pos=36747 sysload=0.12 cputime=41.692 memavail=7294144 print_time=1197.081 buffer_time=2.352 print_stall=0 extruder: target=240 temp=240.0 pwm=0.391
Stats 789663.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=346563 bytes_read=276477 bytes_retransmit=9 bytes_invalid=0 send_seq=12029 receive_seq=12029 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993143 heater_bed: target=80 temp=79.8 pwm=0.447 sd_pos=36802 sysload=0.12 cputime=41.750 memavail=7294144 print_time=1197.881 buffer_time=2.151 print_stall=0 extruder: target=240 temp=240.1 pwm=0.311
Stats 789664.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=348042 bytes_read=276930 bytes_retransmit=9 bytes_invalid=0 send_seq=12061 receive_seq=12061 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993139 heater_bed: target=80 temp=79.8 pwm=0.374 sd_pos=36908 sysload=0.12 cputime=41.809 memavail=7294144 print_time=1199.466 buffer_time=2.736 print_stall=0 extruder: target=240 temp=239.9 pwm=0.397
Stats 789665.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=348931 bytes_read=277352 bytes_retransmit=9 bytes_invalid=0 send_seq=12087 receive_seq=12087 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993134 heater_bed: target=80 temp=79.8 pwm=0.431 sd_pos=36963 sysload=0.12 cputime=41.870 memavail=7294144 print_time=1200.252 buffer_time=2.521 print_stall=0 extruder: target=240 temp=240.0 pwm=0.322
Stats 789666.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=349774 bytes_read=277750 bytes_retransmit=9 bytes_invalid=0 send_seq=12111 receive_seq=12111 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993128 heater_bed: target=80 temp=79.8 pwm=0.395 sd_pos=37018 sysload=0.12 cputime=41.926 memavail=7294144 print_time=1201.051 buffer_time=2.319 print_stall=0 extruder: target=240 temp=240.1 pwm=0.293
Stats 789667.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=350681 bytes_read=278188 bytes_retransmit=9 bytes_invalid=0 send_seq=12137 receive_seq=12137 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993136 heater_bed: target=80 temp=79.8 pwm=0.490 sd_pos=37073 sysload=0.11 cputime=41.987 memavail=7294144 print_time=1201.837 buffer_time=2.105 print_stall=0 extruder: target=240 temp=240.1 pwm=0.298
Stats 789668.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=352150 bytes_read=278655 bytes_retransmit=9 bytes_invalid=0 send_seq=12172 receive_seq=12172 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993140 heater_bed: target=80 temp=79.8 pwm=0.468 sd_pos=37183 sysload=0.11 cputime=42.047 memavail=7294144 print_time=1203.422 buffer_time=2.690 print_stall=0 extruder: target=240 temp=240.1 pwm=0.371
Stats 789669.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=353035 bytes_read=279048 bytes_retransmit=9 bytes_invalid=0 send_seq=12195 receive_seq=12195 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993134 heater_bed: target=80 temp=79.8 pwm=0.396 sd_pos=37239 sysload=0.11 cputime=42.108 memavail=7294144 print_time=1204.222 buffer_time=2.488 print_stall=0 extruder: target=240 temp=240.2 pwm=0.282
Stats 789670.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=353901 bytes_read=279466 bytes_retransmit=9 bytes_invalid=0 send_seq=12220 receive_seq=12220 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993131 heater_bed: target=80 temp=79.8 pwm=0.406 sd_pos=37294 sysload=0.11 cputime=42.173 memavail=7294144 print_time=1205.008 buffer_time=2.274 print_stall=0 extruder: target=240 temp=240.0 pwm=0.337
Stats 789671.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=354771 bytes_read=279883 bytes_retransmit=9 bytes_invalid=0 send_seq=12245 receive_seq=12245 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993130 heater_bed: target=80 temp=79.8 pwm=0.423 sd_pos=37349 sysload=0.11 cputime=42.244 memavail=7293896 print_time=1205.807 buffer_time=2.073 print_stall=0 extruder: target=240 temp=240.0 pwm=0.351
Stats 789672.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=356268 bytes_read=280346 bytes_retransmit=9 bytes_invalid=0 send_seq=12279 receive_seq=12279 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119993133 heater_bed: target=80 temp=79.8 pwm=0.423 sd_pos=37460 sysload=0.10 cputime=42.311 memavail=7293896 print_time=1207.393 buffer_time=2.658 print_stall=0 extruder: target=240 temp=239.7 pwm=0.516
Stats 789673.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=357149 bytes_read=280759 bytes_retransmit=9 bytes_invalid=0 send_seq=12303 receive_seq=12303 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993135 heater_bed: target=80 temp=79.7 pwm=0.498 sd_pos=37515 sysload=0.10 cputime=42.371 memavail=7293896 print_time=1208.179 buffer_time=2.443 print_stall=0 extruder: target=240 temp=239.8 pwm=0.379
Stats 789674.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=358051 bytes_read=281181 bytes_retransmit=9 bytes_invalid=0 send_seq=12329 receive_seq=12329 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993134 heater_bed: target=80 temp=79.7 pwm=0.528 sd_pos=37570 sysload=0.10 cputime=42.439 memavail=7293896 print_time=1208.978 buffer_time=2.241 print_stall=0 extruder: target=240 temp=240.3 pwm=0.204
Stats 789675.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=358957 bytes_read=281584 bytes_retransmit=9 bytes_invalid=0 send_seq=12354 receive_seq=12354 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993135 heater_bed: target=80 temp=79.7 pwm=0.503 sd_pos=37649 sysload=0.10 cputime=42.502 memavail=7293896 print_time=1209.764 buffer_time=2.026 print_stall=0 extruder: target=240 temp=239.9 pwm=0.417
Stats 789676.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=360599 bytes_read=282062 bytes_retransmit=9 bytes_invalid=0 send_seq=12391 receive_seq=12391 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993180 heater_bed: target=80 temp=79.7 pwm=0.464 sd_pos=37760 sysload=0.10 cputime=42.574 memavail=7293448 print_time=1211.349 buffer_time=2.610 print_stall=0 extruder: target=240 temp=239.9 pwm=0.399
Stats 789677.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=361486 bytes_read=282494 bytes_retransmit=9 bytes_invalid=0 send_seq=12416 receive_seq=12416 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993182 heater_bed: target=80 temp=79.7 pwm=0.522 sd_pos=37815 sysload=0.09 cputime=42.630 memavail=7293448 print_time=1212.149 buffer_time=2.409 print_stall=0 extruder: target=240 temp=239.9 pwm=0.382
Stats 789678.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=362400 bytes_read=282892 bytes_retransmit=9 bytes_invalid=0 send_seq=12440 receive_seq=12440 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993177 heater_bed: target=80 temp=79.7 pwm=0.451 sd_pos=37872 sysload=0.09 cputime=42.682 memavail=7293448 print_time=1212.935 buffer_time=2.194 print_stall=0 extruder: target=240 temp=239.8 pwm=0.464
Stats 789679.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=364010 bytes_read=283340 bytes_retransmit=9 bytes_invalid=0 send_seq=12476 receive_seq=12471 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993174 heater_bed: target=80 temp=79.7 pwm=0.451 sd_pos=37985 sysload=0.09 cputime=42.741 memavail=7293224 print_time=1214.520 buffer_time=2.778 print_stall=0 extruder: target=240 temp=240.2 pwm=0.299
Stats 789680.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=364898 bytes_read=283788 bytes_retransmit=9 bytes_invalid=0 send_seq=12500 receive_seq=12500 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993183 heater_bed: target=80 temp=79.7 pwm=0.451 sd_pos=38040 sysload=0.09 cputime=42.793 memavail=7293224 print_time=1215.320 buffer_time=2.577 print_stall=0 extruder: target=240 temp=240.1 pwm=0.308
Stats 789681.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=365806 bytes_read=284191 bytes_retransmit=9 bytes_invalid=0 send_seq=12525 receive_seq=12525 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993178 heater_bed: target=80 temp=79.7 pwm=0.451 sd_pos=38097 sysload=0.09 cputime=42.855 memavail=7293224 print_time=1216.105 buffer_time=2.362 print_stall=0 extruder: target=240 temp=240.1 pwm=0.319
Stats 789682.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=366736 bytes_read=284634 bytes_retransmit=9 bytes_invalid=0 send_seq=12552 receive_seq=12552 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993172 heater_bed: target=80 temp=79.7 pwm=0.404 sd_pos=38152 sysload=0.09 cputime=42.912 memavail=7293224 print_time=1216.905 buffer_time=2.161 print_stall=0 extruder: target=240 temp=240.0 pwm=0.338
Stats 789683.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=368329 bytes_read=285116 bytes_retransmit=9 bytes_invalid=0 send_seq=12590 receive_seq=12590 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119993169 heater_bed: target=80 temp=79.7 pwm=0.539 sd_pos=38265 sysload=0.09 cputime=42.970 memavail=7293224 print_time=1218.490 buffer_time=2.746 print_stall=0 extruder: target=240 temp=240.0 pwm=0.345
Stats 789684.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=369256 bytes_read=285509 bytes_retransmit=9 bytes_invalid=0 send_seq=12614 receive_seq=12614 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993205 heater_bed: target=80 temp=79.7 pwm=0.444 sd_pos=38322 sysload=0.09 cputime=43.027 memavail=7293224 print_time=1219.276 buffer_time=2.531 print_stall=0 extruder: target=240 temp=240.0 pwm=0.314
Stats 789685.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=370100 bytes_read=285909 bytes_retransmit=9 bytes_invalid=0 send_seq=12637 receive_seq=12637 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993197 heater_bed: target=80 temp=79.7 pwm=0.444 sd_pos=38377 sysload=0.09 cputime=43.080 memavail=7293224 print_time=1220.076 buffer_time=2.331 print_stall=0 extruder: target=240 temp=239.9 pwm=0.383
Stats 789686.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=370989 bytes_read=286312 bytes_retransmit=9 bytes_invalid=0 send_seq=12660 receive_seq=12660 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993191 heater_bed: target=80 temp=79.7 pwm=0.444 sd_pos=38435 sysload=0.09 cputime=43.139 memavail=7293224 print_time=1220.862 buffer_time=2.116 print_stall=0 extruder: target=240 temp=240.0 pwm=0.306
Stats 789687.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=371934 bytes_read=286720 bytes_retransmit=9 bytes_invalid=0 send_seq=12683 receive_seq=12683 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119993186 heater_bed: target=80 temp=79.7 pwm=0.436 sd_pos=38521 sysload=0.08 cputime=43.222 memavail=7293196 print_time=1221.708 buffer_time=1.961 print_stall=0 extruder: target=240 temp=240.1 pwm=0.306
Stats 789688.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=373538 bytes_read=287198 bytes_retransmit=9 bytes_invalid=0 send_seq=12720 receive_seq=12720 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993183 heater_bed: target=80 temp=79.7 pwm=0.489 sd_pos=38603 sysload=0.08 cputime=43.276 memavail=7293196 print_time=1223.247 buffer_time=2.499 print_stall=0 extruder: target=240 temp=240.1 pwm=0.332
Stats 789689.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=374412 bytes_read=287610 bytes_retransmit=9 bytes_invalid=0 send_seq=12744 receive_seq=12744 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993183 heater_bed: target=80 temp=79.7 pwm=0.426 sd_pos=38660 sysload=0.08 cputime=43.328 memavail=7293196 print_time=1224.032 buffer_time=2.285 print_stall=0 extruder: target=240 temp=240.1 pwm=0.332
Stats 789690.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=375296 bytes_read=288003 bytes_retransmit=9 bytes_invalid=0 send_seq=12767 receive_seq=12767 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993179 heater_bed: target=80 temp=79.7 pwm=0.479 sd_pos=38716 sysload=0.08 cputime=43.382 memavail=7293196 print_time=1224.832 buffer_time=2.084 print_stall=0 extruder: target=240 temp=240.2 pwm=0.306
Stats 789691.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=376816 bytes_read=288466 bytes_retransmit=9 bytes_invalid=0 send_seq=12801 receive_seq=12801 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119993173 heater_bed: target=80 temp=79.7 pwm=0.479 sd_pos=38828 sysload=0.08 cputime=43.444 memavail=7293708 print_time=1226.417 buffer_time=2.669 print_stall=0 extruder: target=240 temp=239.9 pwm=0.430
Stats 789692.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=377809 bytes_read=288908 bytes_retransmit=9 bytes_invalid=0 send_seq=12828 receive_seq=12828 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993169 heater_bed: target=80 temp=79.7 pwm=0.423 sd_pos=38883 sysload=0.07 cputime=43.502 memavail=7293708 print_time=1227.203 buffer_time=2.455 print_stall=0 extruder: target=240 temp=239.8 pwm=0.374
Stats 789693.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=378655 bytes_read=289296 bytes_retransmit=9 bytes_invalid=0 send_seq=12850 receive_seq=12850 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993206 heater_bed: target=80 temp=79.7 pwm=0.530 sd_pos=38940 sysload=0.07 cputime=43.551 memavail=7293708 print_time=1228.003 buffer_time=2.253 print_stall=0 extruder: target=240 temp=239.9 pwm=0.374
Stats 789694.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=379568 bytes_read=289719 bytes_retransmit=9 bytes_invalid=0 send_seq=12876 receive_seq=12876 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993200 heater_bed: target=80 temp=79.8 pwm=0.394 sd_pos=39007 sysload=0.07 cputime=43.606 memavail=7293484 print_time=1228.788 buffer_time=2.039 print_stall=0 extruder: target=240 temp=240.0 pwm=0.317
Stats 789695.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=381084 bytes_read=290181 bytes_retransmit=9 bytes_invalid=0 send_seq=12910 receive_seq=12910 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119993196 heater_bed: target=80 temp=79.8 pwm=0.454 sd_pos=39119 sysload=0.07 cputime=43.677 memavail=7293484 print_time=1230.374 buffer_time=2.624 print_stall=0 extruder: target=240 temp=240.1 pwm=0.288
Stats 789696.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=381962 bytes_read=290569 bytes_retransmit=9 bytes_invalid=0 send_seq=12932 receive_seq=12932 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993193 heater_bed: target=80 temp=79.8 pwm=0.374 sd_pos=39176 sysload=0.07 cputime=43.732 memavail=7293484 print_time=1231.173 buffer_time=2.423 print_stall=0 extruder: target=240 temp=240.3 pwm=0.288
Stats 789697.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=382853 bytes_read=290997 bytes_retransmit=9 bytes_invalid=0 send_seq=12956 receive_seq=12956 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993187 heater_bed: target=80 temp=79.8 pwm=0.489 sd_pos=39233 sysload=0.07 cputime=43.793 memavail=7293484 print_time=1231.959 buffer_time=2.209 print_stall=0 extruder: target=240 temp=240.2 pwm=0.275
Stats 789698.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=383792 bytes_read=291424 bytes_retransmit=9 bytes_invalid=0 send_seq=12983 receive_seq=12983 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993180 heater_bed: target=80 temp=79.8 pwm=0.463 sd_pos=39290 sysload=0.07 cputime=43.847 memavail=7293484 print_time=1232.759 buffer_time=2.008 print_stall=0 extruder: target=240 temp=239.8 pwm=0.415
Stats 789699.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=385329 bytes_read=291867 bytes_retransmit=9 bytes_invalid=0 send_seq=13016 receive_seq=13016 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993176 heater_bed: target=80 temp=79.8 pwm=0.525 sd_pos=39406 sysload=0.07 cputime=43.898 memavail=7293484 print_time=1234.347 buffer_time=2.595 print_stall=0 extruder: target=240 temp=239.9 pwm=0.415
Stats 789700.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=387234 bytes_read=292360 bytes_retransmit=9 bytes_invalid=0 send_seq=13056 receive_seq=13056 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993179 heater_bed: target=80 temp=79.8 pwm=0.546 sd_pos=39684 sysload=0.07 cputime=43.964 memavail=7293484 print_time=1235.428 buffer_time=2.677 print_stall=0 extruder: target=240 temp=240.0 pwm=0.310
Stats 789701.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=388119 bytes_read=292782 bytes_retransmit=9 bytes_invalid=0 send_seq=13082 receive_seq=13082 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993187 heater_bed: target=80 temp=79.8 pwm=0.501 sd_pos=39741 sysload=0.07 cputime=44.020 memavail=7293616 print_time=1236.225 buffer_time=2.472 print_stall=0 extruder: target=240 temp=240.1 pwm=0.342
Stats 789702.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=389425 bytes_read=293220 bytes_retransmit=9 bytes_invalid=0 send_seq=13111 receive_seq=13111 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=79.8 pwm=0.501 sd_pos=40050 sysload=0.30 cputime=44.076 memavail=7293740 print_time=1237.147 buffer_time=2.393 print_stall=0 extruder: target=240 temp=240.1 pwm=0.342
Stats 789703.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=391837 bytes_read=293773 bytes_retransmit=9 bytes_invalid=0 send_seq=13163 receive_seq=13163 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993222 heater_bed: target=80 temp=79.8 pwm=0.482 sd_pos=40325 sysload=0.30 cputime=44.135 memavail=7293740 print_time=1238.430 buffer_time=2.676 print_stall=0 extruder: target=240 temp=240.2 pwm=0.305
Stats 789704.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=392375 bytes_read=294165 bytes_retransmit=9 bytes_invalid=0 send_seq=13183 receive_seq=13183 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993213 heater_bed: target=80 temp=79.8 pwm=0.411 sd_pos=40407 sysload=0.30 cputime=44.198 memavail=7293740 print_time=1239.209 buffer_time=2.454 print_stall=0 extruder: target=240 temp=240.1 pwm=0.399
Stats 789705.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=393207 bytes_read=294553 bytes_retransmit=9 bytes_invalid=0 send_seq=13205 receive_seq=13205 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993214 heater_bed: target=80 temp=79.8 pwm=0.411 sd_pos=40407 sysload=0.30 cputime=44.248 memavail=7293740 print_time=1239.996 buffer_time=2.240 print_stall=0 extruder: target=240 temp=240.1 pwm=0.357
Stats 789706.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=393569 bytes_read=294926 bytes_retransmit=9 bytes_invalid=0 send_seq=13221 receive_seq=13221 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993247 heater_bed: target=80 temp=79.9 pwm=0.312 sd_pos=40464 sysload=0.30 cputime=44.304 memavail=7293740 print_time=1240.928 buffer_time=2.172 print_stall=0 extruder: target=240 temp=240.0 pwm=0.428
Stats 789707.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=394631 bytes_read=295373 bytes_retransmit=9 bytes_invalid=0 send_seq=13249 receive_seq=13249 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993236 heater_bed: target=80 temp=79.9 pwm=0.414 sd_pos=40533 sysload=0.28 cputime=44.365 memavail=7293740 print_time=1242.638 buffer_time=2.881 print_stall=0 extruder: target=240 temp=239.9 pwm=0.375
Stats 789708.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=395525 bytes_read=295776 bytes_retransmit=9 bytes_invalid=0 send_seq=13274 receive_seq=13274 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993224 heater_bed: target=80 temp=79.9 pwm=0.471 sd_pos=40533 sysload=0.28 cputime=44.417 memavail=7293740 print_time=1243.284 buffer_time=2.527 print_stall=0 extruder: target=240 temp=239.7 pwm=0.462
Stats 789709.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=395953 bytes_read=296178 bytes_retransmit=9 bytes_invalid=0 send_seq=13293 receive_seq=13293 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993213 heater_bed: target=80 temp=79.9 pwm=0.512 sd_pos=40591 sysload=0.28 cputime=44.480 memavail=7293740 print_time=1244.330 buffer_time=2.572 print_stall=0 extruder: target=240 temp=240.1 pwm=0.245
Stats 789710.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=396862 bytes_read=296581 bytes_retransmit=9 bytes_invalid=0 send_seq=13318 receive_seq=13318 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993207 heater_bed: target=80 temp=79.9 pwm=0.474 sd_pos=40591 sysload=0.28 cputime=44.538 memavail=7293740 print_time=1244.978 buffer_time=2.220 print_stall=0 extruder: target=240 temp=240.4 pwm=0.131
Stats 789711.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=397194 bytes_read=296929 bytes_retransmit=9 bytes_invalid=0 send_seq=13332 receive_seq=13332 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993259 heater_bed: target=80 temp=79.9 pwm=0.474 sd_pos=40646 sysload=0.28 cputime=44.585 memavail=7292984 print_time=1246.004 buffer_time=2.246 print_stall=0 extruder: target=240 temp=240.2 pwm=0.254
Stats 789712.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=398130 bytes_read=297376 bytes_retransmit=9 bytes_invalid=0 send_seq=13357 receive_seq=13357 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=16 upcoming_bytes=11 freq=119993246 heater_bed: target=80 temp=79.9 pwm=0.474 sd_pos=40646 sysload=0.25 cputime=44.648 memavail=7292984 print_time=1247.096 buffer_time=2.338 print_stall=0 extruder: target=240 temp=240.0 pwm=0.356
Stats 789713.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=399083 bytes_read=297779 bytes_retransmit=9 bytes_invalid=0 send_seq=13382 receive_seq=13382 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993238 heater_bed: target=80 temp=79.9 pwm=0.453 sd_pos=40703 sysload=0.25 cputime=44.705 memavail=7292984 print_time=1248.012 buffer_time=2.254 print_stall=0 extruder: target=240 temp=240.0 pwm=0.356
Stats 789714.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=399481 bytes_read=298132 bytes_retransmit=9 bytes_invalid=0 send_seq=13397 receive_seq=13397 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993231 heater_bed: target=80 temp=79.9 pwm=0.355 sd_pos=40757 sysload=0.25 cputime=44.759 memavail=7292984 print_time=1249.300 buffer_time=2.541 print_stall=0 extruder: target=240 temp=239.8 pwm=0.421
Stats 789715.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=400328 bytes_read=298554 bytes_retransmit=9 bytes_invalid=0 send_seq=13420 receive_seq=13420 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993263 heater_bed: target=80 temp=79.9 pwm=0.406 sd_pos=40757 sysload=0.25 cputime=44.806 memavail=7292984 print_time=1249.946 buffer_time=2.186 print_stall=0 extruder: target=240 temp=239.8 pwm=0.332
Stats 789716.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=400695 bytes_read=298912 bytes_retransmit=9 bytes_invalid=0 send_seq=13436 receive_seq=13436 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993252 heater_bed: target=80 temp=79.9 pwm=0.410 sd_pos=40815 sysload=0.25 cputime=44.847 memavail=7292984 print_time=1250.922 buffer_time=2.161 print_stall=0 extruder: target=240 temp=240.1 pwm=0.234
Stats 789717.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=401684 bytes_read=299325 bytes_retransmit=9 bytes_invalid=0 send_seq=13460 receive_seq=13460 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993240 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=40871 sysload=0.39 cputime=44.912 memavail=7292300 print_time=1252.525 buffer_time=2.764 print_stall=0 extruder: target=240 temp=240.1 pwm=0.250
Stats 789718.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=402548 bytes_read=299757 bytes_retransmit=9 bytes_invalid=0 send_seq=13485 receive_seq=13485 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993230 heater_bed: target=80 temp=80.0 pwm=0.396 sd_pos=40871 sysload=0.39 cputime=44.966 memavail=7292472 print_time=1253.171 buffer_time=2.409 print_stall=0 extruder: target=240 temp=240.1 pwm=0.338
Stats 789719.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=402910 bytes_read=300110 bytes_retransmit=9 bytes_invalid=0 send_seq=13500 receive_seq=13500 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993224 heater_bed: target=80 temp=80.0 pwm=0.320 sd_pos=40928 sysload=0.39 cputime=45.019 memavail=7292472 print_time=1254.112 buffer_time=2.348 print_stall=0 extruder: target=240 temp=240.2 pwm=0.258
Stats 789720.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=403776 bytes_read=300492 bytes_retransmit=9 bytes_invalid=0 send_seq=13522 receive_seq=13522 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993258 heater_bed: target=80 temp=80.0 pwm=0.320 sd_pos=40982 sysload=0.39 cputime=45.068 memavail=7292472 print_time=1255.680 buffer_time=2.916 print_stall=0 extruder: target=240 temp=239.9 pwm=0.394
Stats 789721.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=404607 bytes_read=300900 bytes_retransmit=9 bytes_invalid=0 send_seq=13544 receive_seq=13544 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119993245 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=40982 sysload=0.39 cputime=45.115 memavail=7292220 print_time=1256.326 buffer_time=2.562 print_stall=0 extruder: target=240 temp=240.0 pwm=0.298
Stats 789722.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=404984 bytes_read=301265 bytes_retransmit=9 bytes_invalid=0 send_seq=13559 receive_seq=13559 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993232 heater_bed: target=80 temp=80.1 pwm=0.358 sd_pos=41039 sysload=0.36 cputime=45.161 memavail=7292228 print_time=1257.231 buffer_time=2.466 print_stall=0 extruder: target=240 temp=239.8 pwm=0.377
Stats 789723.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=405834 bytes_read=301658 bytes_retransmit=9 bytes_invalid=0 send_seq=13582 receive_seq=13582 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119993222 heater_bed: target=80 temp=80.1 pwm=0.426 sd_pos=41039 sysload=0.36 cputime=45.217 memavail=7292228 print_time=1257.879 buffer_time=2.113 print_stall=0 extruder: target=240 temp=239.9 pwm=0.326
Stats 789724.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=406843 bytes_read=302100 bytes_retransmit=9 bytes_invalid=0 send_seq=13609 receive_seq=13609 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993255 heater_bed: target=80 temp=80.1 pwm=0.356 sd_pos=41096 sysload=0.36 cputime=45.278 memavail=7292228 print_time=1259.410 buffer_time=2.642 print_stall=0 extruder: target=240 temp=239.9 pwm=0.367
Stats 789725.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=407263 bytes_read=302458 bytes_retransmit=9 bytes_invalid=0 send_seq=13625 receive_seq=13625 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119993243 heater_bed: target=80 temp=80.1 pwm=0.413 sd_pos=41153 sysload=0.36 cputime=45.331 memavail=7292228 print_time=1260.279 buffer_time=2.511 print_stall=0 extruder: target=240 temp=239.9 pwm=0.324
Stats 789726.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=408109 bytes_read=302846 bytes_retransmit=9 bytes_invalid=0 send_seq=13647 receive_seq=13647 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119993231 heater_bed: target=80 temp=80.1 pwm=0.413 sd_pos=41153 sysload=0.36 cputime=45.384 memavail=7292228 print_time=1260.928 buffer_time=2.158 print_stall=0 extruder: target=240 temp=240.0 pwm=0.324
Stats 789727.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=408485 bytes_read=303258 bytes_retransmit=9 bytes_invalid=0 send_seq=13665 receive_seq=13665 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993218 heater_bed: target=80 temp=80.1 pwm=0.364 sd_pos=41209 sysload=0.33 cputime=45.441 memavail=7292228 print_time=1261.777 buffer_time=2.007 print_stall=0 extruder: target=240 temp=240.2 pwm=0.335
Stats 789728.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=409439 bytes_read=303666 bytes_retransmit=9 bytes_invalid=0 send_seq=13691 receive_seq=13691 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993205 heater_bed: target=80 temp=80.1 pwm=0.482 sd_pos=41239 sysload=0.33 cputime=45.505 memavail=7292228 print_time=1263.017 buffer_time=2.247 print_stall=0 extruder: target=240 temp=239.8 pwm=0.452
Stats 789729.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=410367 bytes_read=304069 bytes_retransmit=9 bytes_invalid=0 send_seq=13716 receive_seq=13716 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993193 heater_bed: target=80 temp=80.1 pwm=0.401 sd_pos=41266 sysload=0.33 cputime=45.558 memavail=7292228 print_time=1263.906 buffer_time=2.135 print_stall=0 extruder: target=240 temp=239.9 pwm=0.345
Stats 789730.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=411305 bytes_read=304501 bytes_retransmit=9 bytes_invalid=0 send_seq=13741 receive_seq=13741 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119993187 heater_bed: target=80 temp=80.1 pwm=0.453 sd_pos=41325 sysload=0.33 cputime=45.622 memavail=7292228 print_time=1265.218 buffer_time=2.446 print_stall=0 extruder: target=240 temp=240.0 pwm=0.361
Stats 789731.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=411758 bytes_read=304874 bytes_retransmit=9 bytes_invalid=0 send_seq=13760 receive_seq=13760 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993178 heater_bed: target=80 temp=80.1 pwm=0.457 sd_pos=41407 sysload=0.33 cputime=45.688 memavail=7292004 print_time=1266.165 buffer_time=2.393 print_stall=0 extruder: target=240 temp=240.1 pwm=0.304
Stats 789732.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=412617 bytes_read=305277 bytes_retransmit=9 bytes_invalid=0 send_seq=13782 receive_seq=13782 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993171 heater_bed: target=80 temp=80.1 pwm=0.393 sd_pos=41407 sysload=0.31 cputime=45.741 memavail=7292004 print_time=1266.813 buffer_time=2.040 print_stall=0 extruder: target=240 temp=240.0 pwm=0.409
Stats 789733.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=413576 bytes_read=305719 bytes_retransmit=9 bytes_invalid=0 send_seq=13809 receive_seq=13809 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993168 heater_bed: target=80 temp=80.1 pwm=0.352 sd_pos=41466 sysload=0.31 cputime=45.811 memavail=7292008 print_time=1268.089 buffer_time=2.315 print_stall=0 extruder: target=240 temp=240.0 pwm=0.392
Stats 789734.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=413951 bytes_read=306077 bytes_retransmit=9 bytes_invalid=0 send_seq=13825 receive_seq=13825 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993160 heater_bed: target=80 temp=80.1 pwm=0.334 sd_pos=41524 sysload=0.31 cputime=45.873 memavail=7292008 print_time=1268.999 buffer_time=2.223 print_stall=0 extruder: target=240 temp=240.1 pwm=0.262
Stats 789735.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=414971 bytes_read=306500 bytes_retransmit=9 bytes_invalid=0 send_seq=13851 receive_seq=13851 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993151 heater_bed: target=80 temp=80.1 pwm=0.423 sd_pos=41583 sysload=0.31 cputime=45.944 memavail=7292008 print_time=1270.387 buffer_time=2.610 print_stall=0 extruder: target=240 temp=240.0 pwm=0.331
Stats 789736.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=415764 bytes_read=306902 bytes_retransmit=9 bytes_invalid=0 send_seq=13873 receive_seq=13873 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993143 heater_bed: target=80 temp=80.1 pwm=0.341 sd_pos=41583 sysload=0.31 cputime=46.002 memavail=7291784 print_time=1270.885 buffer_time=2.107 print_stall=0 extruder: target=240 temp=240.1 pwm=0.331
Stats 789737.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=416710 bytes_read=307315 bytes_retransmit=9 bytes_invalid=0 send_seq=13897 receive_seq=13897 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119993139 heater_bed: target=80 temp=80.1 pwm=0.429 sd_pos=41641 sysload=0.28 cputime=46.057 memavail=7293760 print_time=1272.105 buffer_time=2.327 print_stall=0 extruder: target=240 temp=239.9 pwm=0.384
Stats 789738.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=417128 bytes_read=307688 bytes_retransmit=9 bytes_invalid=0 send_seq=13913 receive_seq=13913 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993139 heater_bed: target=80 temp=80.1 pwm=0.354 sd_pos=41671 sysload=0.28 cputime=46.123 memavail=7293760 print_time=1272.848 buffer_time=2.067 print_stall=0 extruder: target=240 temp=240.1 pwm=0.317
Stats 789739.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=418245 bytes_read=308120 bytes_retransmit=9 bytes_invalid=0 send_seq=13941 receive_seq=13941 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993131 heater_bed: target=80 temp=80.1 pwm=0.354 sd_pos=41869 sysload=0.28 cputime=46.191 memavail=7293536 print_time=1274.432 buffer_time=2.651 print_stall=0 extruder: target=240 temp=240.0 pwm=0.350
Stats 789740.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=419292 bytes_read=308523 bytes_retransmit=9 bytes_invalid=0 send_seq=13966 receive_seq=13966 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119993122 heater_bed: target=80 temp=80.1 pwm=0.323 sd_pos=41928 sysload=0.28 cputime=46.253 memavail=7293536 print_time=1275.714 buffer_time=2.932 print_stall=0 extruder: target=240 temp=239.9 pwm=0.350
Stats 789741.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=420124 bytes_read=308937 bytes_retransmit=9 bytes_invalid=0 send_seq=13988 receive_seq=13988 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993120 heater_bed: target=80 temp=80.1 pwm=0.398 sd_pos=41928 sysload=0.28 cputime=46.302 memavail=7293060 print_time=1276.212 buffer_time=2.428 print_stall=0 extruder: target=240 temp=239.9 pwm=0.350
Stats 789742.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=421914 bytes_read=309449 bytes_retransmit=9 bytes_invalid=0 send_seq=14029 receive_seq=14029 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993114 heater_bed: target=80 temp=80.2 pwm=0.299 sd_pos=42417 sysload=0.26 cputime=46.371 memavail=7293060 print_time=1277.329 buffer_time=2.545 print_stall=0 extruder: target=240 temp=240.1 pwm=0.300
Stats 789743.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=422875 bytes_read=309857 bytes_retransmit=9 bytes_invalid=0 send_seq=14055 receive_seq=14055 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993108 heater_bed: target=80 temp=80.1 pwm=0.440 sd_pos=42614 sysload=0.26 cputime=46.431 memavail=7293060 print_time=1278.538 buffer_time=2.752 print_stall=0 extruder: target=240 temp=240.0 pwm=0.351
Stats 789744.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=423665 bytes_read=310260 bytes_retransmit=9 bytes_invalid=0 send_seq=14077 receive_seq=14077 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993105 heater_bed: target=80 temp=80.2 pwm=0.348 sd_pos=42614 sysload=0.26 cputime=46.485 memavail=7293060 print_time=1279.036 buffer_time=2.250 print_stall=0 extruder: target=240 temp=239.9 pwm=0.416
Stats 789745.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=425439 bytes_read=310737 bytes_retransmit=9 bytes_invalid=0 send_seq=14114 receive_seq=14114 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993128 heater_bed: target=80 temp=80.1 pwm=0.426 sd_pos=43214 sysload=0.26 cputime=46.561 memavail=7293060 print_time=1280.093 buffer_time=2.306 print_stall=0 extruder: target=240 temp=240.1 pwm=0.275
Stats 789746.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=427330 bytes_read=311220 bytes_retransmit=9 bytes_invalid=0 send_seq=14155 receive_seq=14155 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993122 heater_bed: target=80 temp=80.2 pwm=0.390 sd_pos=43296 sysload=0.26 cputime=46.631 memavail=7293060 print_time=1281.479 buffer_time=2.691 print_stall=0 extruder: target=240 temp=240.3 pwm=0.226
Stats 789747.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=428545 bytes_read=311668 bytes_retransmit=9 bytes_invalid=0 send_seq=14183 receive_seq=14183 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993121 heater_bed: target=80 temp=80.2 pwm=0.326 sd_pos=43409 sysload=0.24 cputime=46.695 memavail=7292704 print_time=1281.814 buffer_time=2.026 print_stall=0 extruder: target=240 temp=240.1 pwm=0.311
Stats 789748.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=429931 bytes_read=312120 bytes_retransmit=9 bytes_invalid=0 send_seq=14215 receive_seq=14215 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993120 heater_bed: target=80 temp=80.2 pwm=0.383 sd_pos=43661 sysload=0.24 cputime=46.760 memavail=7292776 print_time=1283.404 buffer_time=2.615 print_stall=0 extruder: target=240 temp=240.2 pwm=0.319
Stats 789749.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=431374 bytes_read=312568 bytes_retransmit=9 bytes_invalid=0 send_seq=14249 receive_seq=14249 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993116 heater_bed: target=80 temp=80.2 pwm=0.383 sd_pos=43829 sysload=0.24 cputime=46.823 memavail=7292552 print_time=1283.955 buffer_time=2.166 print_stall=0 extruder: target=240 temp=240.2 pwm=0.296
Stats 789750.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=432907 bytes_read=313026 bytes_retransmit=9 bytes_invalid=0 send_seq=14282 receive_seq=14282 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993167 heater_bed: target=80 temp=80.2 pwm=0.288 sd_pos=43994 sysload=0.24 cputime=46.893 memavail=7292552 print_time=1285.108 buffer_time=2.317 print_stall=0 extruder: target=240 temp=240.0 pwm=0.410
Stats 789751.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=434707 bytes_read=313508 bytes_retransmit=9 bytes_invalid=0 send_seq=14320 receive_seq=14320 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993159 heater_bed: target=80 temp=80.2 pwm=0.370 sd_pos=44202 sysload=0.24 cputime=46.956 memavail=7292996 print_time=1286.211 buffer_time=2.420 print_stall=0 extruder: target=240 temp=240.0 pwm=0.346
Stats 789752.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=435561 bytes_read=313916 bytes_retransmit=9 bytes_invalid=0 send_seq=14343 receive_seq=14343 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993148 heater_bed: target=80 temp=80.2 pwm=0.428 sd_pos=44258 sysload=0.22 cputime=47.007 memavail=7293064 print_time=1286.859 buffer_time=2.068 print_stall=0 extruder: target=240 temp=240.0 pwm=0.346
Stats 789753.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=438258 bytes_read=314474 bytes_retransmit=9 bytes_invalid=0 send_seq=14396 receive_seq=14396 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993144 heater_bed: target=80 temp=80.2 pwm=0.351 sd_pos=44469 sysload=0.22 cputime=47.062 memavail=7293064 print_time=1288.127 buffer_time=2.334 print_stall=0 extruder: target=240 temp=240.2 pwm=0.298
Stats 789754.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=439112 bytes_read=314886 bytes_retransmit=9 bytes_invalid=0 send_seq=14420 receive_seq=14420 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993152 heater_bed: target=80 temp=80.2 pwm=0.351 sd_pos=44525 sysload=0.22 cputime=47.119 memavail=7293064 print_time=1288.911 buffer_time=2.118 print_stall=0 extruder: target=240 temp=240.4 pwm=0.287
Stats 789755.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=440396 bytes_read=315323 bytes_retransmit=9 bytes_invalid=0 send_seq=14452 receive_seq=14452 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993140 heater_bed: target=80 temp=80.2 pwm=0.351 sd_pos=44668 sysload=0.22 cputime=47.179 memavail=7293064 print_time=1289.844 buffer_time=2.049 print_stall=0 extruder: target=240 temp=240.2 pwm=0.317
Stats 789756.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=443483 bytes_read=315903 bytes_retransmit=9 bytes_invalid=0 send_seq=14511 receive_seq=14511 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993135 heater_bed: target=80 temp=80.2 pwm=0.351 sd_pos=44896 sysload=0.22 cputime=47.242 memavail=7293064 print_time=1291.744 buffer_time=2.949 print_stall=0 extruder: target=240 temp=240.2 pwm=0.317
Stats 789757.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=443996 bytes_read=316302 bytes_retransmit=9 bytes_invalid=0 send_seq=14531 receive_seq=14531 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993128 heater_bed: target=80 temp=80.2 pwm=0.310 sd_pos=44972 sysload=0.20 cputime=47.303 memavail=7293064 print_time=1291.848 buffer_time=2.053 print_stall=0 extruder: target=240 temp=239.9 pwm=0.379
Stats 789758.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=445858 bytes_read=316775 bytes_retransmit=9 bytes_invalid=0 send_seq=14570 receive_seq=14570 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993126 heater_bed: target=80 temp=80.2 pwm=0.367 sd_pos=45117 sysload=0.20 cputime=47.359 memavail=7293064 print_time=1293.017 buffer_time=2.222 print_stall=0 extruder: target=240 temp=240.0 pwm=0.323
Stats 789759.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=447937 bytes_read=317278 bytes_retransmit=9 bytes_invalid=0 send_seq=14612 receive_seq=14612 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993121 heater_bed: target=80 temp=80.2 pwm=0.331 sd_pos=45282 sysload=0.20 cputime=47.418 memavail=7293224 print_time=1294.011 buffer_time=2.215 print_stall=0 extruder: target=240 temp=239.8 pwm=0.397
Stats 789760.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=448797 bytes_read=317700 bytes_retransmit=9 bytes_invalid=0 send_seq=14638 receive_seq=14638 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993117 heater_bed: target=80 temp=80.2 pwm=0.393 sd_pos=45338 sysload=0.20 cputime=47.479 memavail=7293096 print_time=1294.836 buffer_time=2.039 print_stall=0 extruder: target=240 temp=240.3 pwm=0.214
Stats 789761.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=450596 bytes_read=318168 bytes_retransmit=9 bytes_invalid=0 send_seq=14676 receive_seq=14676 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993113 heater_bed: target=80 temp=80.2 pwm=0.393 sd_pos=45569 sysload=0.20 cputime=47.539 memavail=7293584 print_time=1295.937 buffer_time=2.139 print_stall=0 extruder: target=240 temp=240.1 pwm=0.284
Stats 789762.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=453859 bytes_read=318791 bytes_retransmit=9 bytes_invalid=0 send_seq=14739 receive_seq=14739 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993109 heater_bed: target=80 temp=80.1 pwm=0.387 sd_pos=46085 sysload=0.18 cputime=47.599 memavail=7293380 print_time=1297.758 buffer_time=2.959 print_stall=0 extruder: target=240 temp=240.4 pwm=0.190
Stats 789763.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=454980 bytes_read=319233 bytes_retransmit=9 bytes_invalid=0 send_seq=14769 receive_seq=14769 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993108 heater_bed: target=80 temp=80.2 pwm=0.322 sd_pos=46170 sysload=0.18 cputime=47.661 memavail=7293380 print_time=1301.099 buffer_time=5.299 print_stall=0 extruder: target=240 temp=240.1 pwm=0.312
Stats 789764.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=455185 bytes_read=319576 bytes_retransmit=9 bytes_invalid=0 send_seq=14782 receive_seq=14782 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993099 heater_bed: target=80 temp=80.1 pwm=0.407 sd_pos=46170 sysload=0.18 cputime=47.707 memavail=7293380 print_time=1301.099 buffer_time=4.299 print_stall=0 extruder: target=240 temp=240.1 pwm=0.312
Stats 789765.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=455390 bytes_read=319939 bytes_retransmit=9 bytes_invalid=0 send_seq=14796 receive_seq=14796 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993094 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=46170 sysload=0.18 cputime=47.756 memavail=7293380 print_time=1301.099 buffer_time=3.298 print_stall=0 extruder: target=240 temp=239.6 pwm=0.459
Stats 789766.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=455579 bytes_read=320296 bytes_retransmit=9 bytes_invalid=0 send_seq=14809 receive_seq=14809 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993091 heater_bed: target=80 temp=80.1 pwm=0.348 sd_pos=46170 sysload=0.18 cputime=47.806 memavail=7293380 print_time=1301.099 buffer_time=2.298 print_stall=0 extruder: target=240 temp=239.9 pwm=0.361
Stats 789767.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=456857 bytes_read=320734 bytes_retransmit=9 bytes_invalid=0 send_seq=14838 receive_seq=14838 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119993095 heater_bed: target=80 temp=80.1 pwm=0.480 sd_pos=46280 sysload=0.17 cputime=47.868 memavail=7293380 print_time=1302.183 buffer_time=2.382 print_stall=0 extruder: target=240 temp=240.1 pwm=0.289
Stats 789768.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=457460 bytes_read=321117 bytes_retransmit=9 bytes_invalid=0 send_seq=14856 receive_seq=14856 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119993092 heater_bed: target=80 temp=80.1 pwm=0.359 sd_pos=46436 sysload=0.17 cputime=47.922 memavail=7293380 print_time=1304.104 buffer_time=3.303 print_stall=0 extruder: target=240 temp=240.1 pwm=0.280
Stats 789769.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=457675 bytes_read=321479 bytes_retransmit=9 bytes_invalid=0 send_seq=14870 receive_seq=14870 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993089 heater_bed: target=80 temp=80.2 pwm=0.298 sd_pos=46436 sysload=0.17 cputime=47.970 memavail=7293380 print_time=1304.104 buffer_time=2.302 print_stall=0 extruder: target=240 temp=240.3 pwm=0.240
Stats 789770.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=458536 bytes_read=321872 bytes_retransmit=9 bytes_invalid=0 send_seq=14893 receive_seq=14893 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993081 heater_bed: target=80 temp=80.2 pwm=0.321 sd_pos=46608 sysload=0.17 cputime=48.038 memavail=7293380 print_time=1305.021 buffer_time=2.219 print_stall=0 extruder: target=240 temp=240.0 pwm=0.413
Stats 789771.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=459128 bytes_read=322265 bytes_retransmit=9 bytes_invalid=0 send_seq=14913 receive_seq=14913 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993073 heater_bed: target=80 temp=80.2 pwm=0.250 sd_pos=46719 sysload=0.17 cputime=48.096 memavail=7292624 print_time=1305.864 buffer_time=2.061 print_stall=0 extruder: target=240 temp=239.7 pwm=0.465
Stats 789772.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=461648 bytes_read=322837 bytes_retransmit=9 bytes_invalid=0 send_seq=14966 receive_seq=14966 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993102 heater_bed: target=80 temp=80.2 pwm=0.261 sd_pos=47073 sysload=0.16 cputime=48.160 memavail=7292628 print_time=1306.997 buffer_time=2.194 print_stall=0 extruder: target=240 temp=239.9 pwm=0.302
Stats 789773.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=462724 bytes_read=323260 bytes_retransmit=9 bytes_invalid=0 send_seq=14995 receive_seq=14995 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993096 heater_bed: target=80 temp=80.2 pwm=0.219 sd_pos=47218 sysload=0.16 cputime=48.218 memavail=7292628 print_time=1308.018 buffer_time=2.214 print_stall=0 extruder: target=240 temp=239.5 pwm=0.482
Stats 789774.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=463292 bytes_read=323643 bytes_retransmit=9 bytes_invalid=0 send_seq=15013 receive_seq=15013 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993091 heater_bed: target=80 temp=80.2 pwm=0.313 sd_pos=47304 sysload=0.16 cputime=48.275 memavail=7292628 print_time=1309.621 buffer_time=2.817 print_stall=0 extruder: target=240 temp=239.9 pwm=0.343
Stats 789775.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=463563 bytes_read=324015 bytes_retransmit=9 bytes_invalid=0 send_seq=15029 receive_seq=15029 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119993085 heater_bed: target=80 temp=80.2 pwm=0.263 sd_pos=47331 sysload=0.16 cputime=48.333 memavail=7292632 print_time=1310.549 buffer_time=2.744 print_stall=0 extruder: target=240 temp=240.1 pwm=0.242
Stats 789776.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=464155 bytes_read=324393 bytes_retransmit=9 bytes_invalid=0 send_seq=15049 receive_seq=15049 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993085 heater_bed: target=80 temp=80.3 pwm=0.341 sd_pos=47331 sysload=0.16 cputime=48.390 memavail=7292632 print_time=1311.118 buffer_time=2.313 print_stall=0 extruder: target=240 temp=240.0 pwm=0.338
Stats 789777.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=464755 bytes_read=324801 bytes_retransmit=9 bytes_invalid=0 send_seq=15069 receive_seq=15069 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119993083 heater_bed: target=80 temp=80.3 pwm=0.307 sd_pos=47331 sysload=0.14 cputime=48.442 memavail=7292632 print_time=1312.173 buffer_time=2.368 print_stall=0 extruder: target=240 temp=240.1 pwm=0.310
Stats 789778.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=465282 bytes_read=325183 bytes_retransmit=9 bytes_invalid=0 send_seq=15087 receive_seq=15087 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993079 heater_bed: target=80 temp=80.2 pwm=0.307 sd_pos=47475 sysload=0.14 cputime=48.503 memavail=7292628 print_time=1313.750 buffer_time=2.943 print_stall=0 extruder: target=240 temp=240.0 pwm=0.373
Stats 789779.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=465455 bytes_read=325521 bytes_retransmit=9 bytes_invalid=0 send_seq=15099 receive_seq=15099 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993076 heater_bed: target=80 temp=80.3 pwm=0.319 sd_pos=47504 sysload=0.14 cputime=48.549 memavail=7292628 print_time=1313.750 buffer_time=1.943 print_stall=0 extruder: target=240 temp=239.8 pwm=0.373
Stats 789780.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=466867 bytes_read=325969 bytes_retransmit=9 bytes_invalid=0 send_seq=15130 receive_seq=15130 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993073 heater_bed: target=80 temp=80.3 pwm=0.319 sd_pos=47790 sysload=0.14 cputime=48.627 memavail=7292628 print_time=1315.602 buffer_time=2.794 print_stall=0 extruder: target=240 temp=239.8 pwm=0.448
Stats 789781.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=467696 bytes_read=326376 bytes_retransmit=9 bytes_invalid=0 send_seq=15153 receive_seq=15153 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993073 heater_bed: target=80 temp=80.3 pwm=0.346 sd_pos=47907 sysload=0.14 cputime=48.688 memavail=7292376 print_time=1316.590 buffer_time=2.782 print_stall=0 extruder: target=240 temp=239.7 pwm=0.448
Stats 789782.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=468349 bytes_read=326769 bytes_retransmit=9 bytes_invalid=0 send_seq=15173 receive_seq=15173 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993070 heater_bed: target=80 temp=80.2 pwm=0.346 sd_pos=48021 sysload=0.13 cputime=48.743 memavail=7292376 print_time=1318.227 buffer_time=3.418 print_stall=0 extruder: target=240 temp=240.1 pwm=0.226
Stats 789783.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=468602 bytes_read=327132 bytes_retransmit=9 bytes_invalid=0 send_seq=15187 receive_seq=15187 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993070 heater_bed: target=80 temp=80.2 pwm=0.348 sd_pos=48021 sysload=0.13 cputime=48.794 memavail=7292380 print_time=1318.227 buffer_time=2.417 print_stall=0 extruder: target=240 temp=239.8 pwm=0.373
Stats 789784.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=468940 bytes_read=327509 bytes_retransmit=9 bytes_invalid=0 send_seq=15204 receive_seq=15204 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993069 heater_bed: target=80 temp=80.2 pwm=0.332 sd_pos=48049 sysload=0.13 cputime=48.854 memavail=7292380 print_time=1319.172 buffer_time=2.362 print_stall=0 extruder: target=240 temp=240.0 pwm=0.356
Stats 789785.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=469823 bytes_read=327907 bytes_retransmit=9 bytes_invalid=0 send_seq=15228 receive_seq=15228 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993091 heater_bed: target=80 temp=80.2 pwm=0.338 sd_pos=48049 sysload=0.13 cputime=48.915 memavail=7292380 print_time=1320.238 buffer_time=2.427 print_stall=0 extruder: target=240 temp=240.1 pwm=0.273
Stats 789786.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=470461 bytes_read=328295 bytes_retransmit=9 bytes_invalid=0 send_seq=15247 receive_seq=15247 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119993085 heater_bed: target=80 temp=80.2 pwm=0.333 sd_pos=48194 sysload=0.13 cputime=48.976 memavail=7292380 print_time=1322.430 buffer_time=3.619 print_stall=0 extruder: target=240 temp=239.9 pwm=0.424
Stats 789787.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=470678 bytes_read=328677 bytes_retransmit=9 bytes_invalid=0 send_seq=15262 receive_seq=15262 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993078 heater_bed: target=80 temp=80.2 pwm=0.333 sd_pos=48194 sysload=0.12 cputime=49.028 memavail=7292380 print_time=1322.430 buffer_time=2.618 print_stall=0 extruder: target=240 temp=239.8 pwm=0.411
Stats 789788.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=471394 bytes_read=329055 bytes_retransmit=9 bytes_invalid=0 send_seq=15282 receive_seq=15282 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119993073 heater_bed: target=80 temp=80.2 pwm=0.389 sd_pos=48366 sysload=0.12 cputime=49.078 memavail=7292380 print_time=1322.850 buffer_time=2.037 print_stall=0 extruder: target=240 temp=239.9 pwm=0.335
Stats 789789.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=473298 bytes_read=329553 bytes_retransmit=9 bytes_invalid=0 send_seq=15323 receive_seq=15323 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993065 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=48618 sysload=0.12 cputime=49.138 memavail=7292380 print_time=1324.606 buffer_time=2.792 print_stall=0 extruder: target=240 temp=239.9 pwm=0.358
Stats 789790.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=474178 bytes_read=329975 bytes_retransmit=9 bytes_invalid=0 send_seq=15349 receive_seq=15349 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993087 heater_bed: target=80 temp=80.1 pwm=0.413 sd_pos=48756 sysload=0.12 cputime=49.199 memavail=7292380 print_time=1325.157 buffer_time=2.342 print_stall=0 extruder: target=240 temp=240.0 pwm=0.307
Stats 789791.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=475652 bytes_read=330416 bytes_retransmit=9 bytes_invalid=0 send_seq=15382 receive_seq=15382 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119993087 heater_bed: target=80 temp=80.1 pwm=0.478 sd_pos=48872 sysload=0.12 cputime=49.264 memavail=7291880 print_time=1326.285 buffer_time=2.470 print_stall=0 extruder: target=240 temp=239.9 pwm=0.393
Stats 789792.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=476614 bytes_read=330841 bytes_retransmit=9 bytes_invalid=0 send_seq=15407 receive_seq=15407 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993083 heater_bed: target=80 temp=80.1 pwm=0.316 sd_pos=48929 sysload=0.11 cputime=49.322 memavail=7291880 print_time=1326.861 buffer_time=2.045 print_stall=0 extruder: target=240 temp=239.7 pwm=0.495
Stats 789793.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=478234 bytes_read=331317 bytes_retransmit=9 bytes_invalid=0 send_seq=15445 receive_seq=15445 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993083 heater_bed: target=80 temp=80.1 pwm=0.322 sd_pos=49045 sysload=0.11 cputime=49.381 memavail=7291880 print_time=1328.014 buffer_time=2.197 print_stall=0 extruder: target=240 temp=239.9 pwm=0.376
Stats 789794.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=479721 bytes_read=331759 bytes_retransmit=9 bytes_invalid=0 send_seq=15478 receive_seq=15478 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993078 heater_bed: target=80 temp=80.1 pwm=0.322 sd_pos=49162 sysload=0.11 cputime=49.442 memavail=7291880 print_time=1329.167 buffer_time=2.348 print_stall=0 extruder: target=240 temp=240.1 pwm=0.321
Stats 789795.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=481243 bytes_read=332222 bytes_retransmit=9 bytes_invalid=0 send_seq=15512 receive_seq=15512 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119993074 heater_bed: target=80 temp=80.1 pwm=0.413 sd_pos=49280 sysload=0.11 cputime=49.506 memavail=7291880 print_time=1330.319 buffer_time=2.500 print_stall=0 extruder: target=240 temp=240.1 pwm=0.267
Stats 789796.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=482188 bytes_read=332639 bytes_retransmit=9 bytes_invalid=0 send_seq=15537 receive_seq=15537 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993069 heater_bed: target=80 temp=80.1 pwm=0.348 sd_pos=49339 sysload=0.11 cputime=49.564 memavail=7291880 print_time=1330.896 buffer_time=2.076 print_stall=0 extruder: target=240 temp=240.3 pwm=0.285
Stats 789797.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=483797 bytes_read=333107 bytes_retransmit=9 bytes_invalid=0 send_seq=15572 receive_seq=15572 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993072 heater_bed: target=80 temp=80.1 pwm=0.333 sd_pos=49457 sysload=0.10 cputime=49.624 memavail=7291656 print_time=1332.048 buffer_time=2.227 print_stall=0 extruder: target=240 temp=239.9 pwm=0.431
Stats 789798.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=485429 bytes_read=333580 bytes_retransmit=9 bytes_invalid=0 send_seq=15608 receive_seq=15608 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993070 heater_bed: target=80 temp=80.1 pwm=0.403 sd_pos=49574 sysload=0.10 cputime=49.691 memavail=7291804 print_time=1333.201 buffer_time=2.379 print_stall=0 extruder: target=240 temp=239.8 pwm=0.431
Stats 789799.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=487050 bytes_read=334057 bytes_retransmit=9 bytes_invalid=0 send_seq=15645 receive_seq=15645 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119993069 heater_bed: target=80 temp=80.1 pwm=0.325 sd_pos=49690 sysload=0.10 cputime=49.756 memavail=7291908 print_time=1334.354 buffer_time=2.531 print_stall=0 extruder: target=240 temp=240.0 pwm=0.363
Stats 789800.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=488013 bytes_read=334455 bytes_retransmit=9 bytes_invalid=0 send_seq=15669 receive_seq=15669 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993071 heater_bed: target=80 temp=80.1 pwm=0.293 sd_pos=49747 sysload=0.10 cputime=49.815 memavail=7291908 print_time=1334.930 buffer_time=2.106 print_stall=0 extruder: target=240 temp=240.1 pwm=0.293
Stats 789801.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=489549 bytes_read=334913 bytes_retransmit=9 bytes_invalid=0 send_seq=15702 receive_seq=15702 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993069 heater_bed: target=80 temp=80.1 pwm=0.354 sd_pos=49863 sysload=0.10 cputime=49.879 memavail=7291152 print_time=1336.083 buffer_time=2.257 print_stall=0 extruder: target=240 temp=240.2 pwm=0.293
Stats 789802.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=491183 bytes_read=335421 bytes_retransmit=9 bytes_invalid=0 send_seq=15740 receive_seq=15740 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993097 heater_bed: target=80 temp=80.1 pwm=0.404 sd_pos=49980 sysload=0.09 cputime=49.943 memavail=7291156 print_time=1337.235 buffer_time=2.409 print_stall=0 extruder: target=240 temp=240.1 pwm=0.354
Stats 789803.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=492747 bytes_read=335869 bytes_retransmit=9 bytes_invalid=0 send_seq=15774 receive_seq=15774 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993092 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=50095 sysload=0.09 cputime=50.000 memavail=7291156 print_time=1338.388 buffer_time=2.562 print_stall=0 extruder: target=240 temp=240.0 pwm=0.354
Stats 789804.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=493664 bytes_read=336287 bytes_retransmit=9 bytes_invalid=0 send_seq=15799 receive_seq=15799 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993086 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=50152 sysload=0.09 cputime=50.056 memavail=7291156 print_time=1338.965 buffer_time=2.137 print_stall=0 extruder: target=240 temp=240.0 pwm=0.348
Stats 789805.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=495297 bytes_read=336759 bytes_retransmit=9 bytes_invalid=0 send_seq=15835 receive_seq=15835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993081 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=50265 sysload=0.09 cputime=50.114 memavail=7291156 print_time=1340.117 buffer_time=2.290 print_stall=0 extruder: target=240 temp=240.0 pwm=0.348
Stats 789806.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=496921 bytes_read=337217 bytes_retransmit=9 bytes_invalid=0 send_seq=15871 receive_seq=15871 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993080 heater_bed: target=80 temp=80.0 pwm=0.360 sd_pos=50381 sysload=0.09 cputime=50.166 memavail=7291156 print_time=1341.270 buffer_time=2.442 print_stall=0 extruder: target=240 temp=240.4 pwm=0.152
Stats 789807.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=497825 bytes_read=337650 bytes_retransmit=9 bytes_invalid=0 send_seq=15896 receive_seq=15896 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993080 heater_bed: target=80 temp=80.1 pwm=0.290 sd_pos=50440 sysload=0.25 cputime=50.231 memavail=7293528 print_time=1341.846 buffer_time=2.018 print_stall=0 extruder: target=240 temp=240.1 pwm=0.331
Stats 789808.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=499477 bytes_read=338122 bytes_retransmit=9 bytes_invalid=0 send_seq=15932 receive_seq=15932 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993074 heater_bed: target=80 temp=80.1 pwm=0.366 sd_pos=50557 sysload=0.25 cputime=50.288 memavail=7293380 print_time=1342.999 buffer_time=2.170 print_stall=0 extruder: target=240 temp=240.0 pwm=0.395
Stats 789809.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=501110 bytes_read=338575 bytes_retransmit=9 bytes_invalid=0 send_seq=15967 receive_seq=15967 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993067 heater_bed: target=80 temp=80.1 pwm=0.366 sd_pos=50674 sysload=0.25 cputime=50.329 memavail=7293380 print_time=1344.152 buffer_time=2.323 print_stall=0 extruder: target=240 temp=240.1 pwm=0.321
Stats 789810.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=502671 bytes_read=339043 bytes_retransmit=9 bytes_invalid=0 send_seq=16002 receive_seq=16002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119993060 heater_bed: target=80 temp=80.1 pwm=0.301 sd_pos=50790 sysload=0.25 cputime=50.371 memavail=7293380 print_time=1345.305 buffer_time=2.474 print_stall=0 extruder: target=240 temp=239.8 pwm=0.403
Stats 789811.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=503586 bytes_read=339455 bytes_retransmit=9 bytes_invalid=0 send_seq=16026 receive_seq=16026 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993115 heater_bed: target=80 temp=80.1 pwm=0.355 sd_pos=50848 sysload=0.25 cputime=50.417 memavail=7293380 print_time=1345.881 buffer_time=2.051 print_stall=0 extruder: target=240 temp=239.9 pwm=0.344
Stats 789812.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=505155 bytes_read=339913 bytes_retransmit=9 bytes_invalid=0 send_seq=16059 receive_seq=16059 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993107 heater_bed: target=80 temp=80.1 pwm=0.355 sd_pos=50965 sysload=0.23 cputime=50.463 memavail=7293384 print_time=1347.034 buffer_time=2.203 print_stall=0 extruder: target=240 temp=239.9 pwm=0.344
Stats 789813.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=506789 bytes_read=340381 bytes_retransmit=9 bytes_invalid=0 send_seq=16094 receive_seq=16094 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993105 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=51081 sysload=0.23 cputime=50.525 memavail=7293384 print_time=1348.187 buffer_time=2.355 print_stall=0 extruder: target=240 temp=239.9 pwm=0.344
Stats 789814.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=508345 bytes_read=340843 bytes_retransmit=9 bytes_invalid=0 send_seq=16128 receive_seq=16128 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119993108 heater_bed: target=80 temp=80.0 pwm=0.383 sd_pos=51197 sysload=0.23 cputime=50.580 memavail=7293384 print_time=1349.339 buffer_time=2.508 print_stall=0 extruder: target=240 temp=240.1 pwm=0.343
Stats 789815.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=509290 bytes_read=341236 bytes_retransmit=9 bytes_invalid=0 send_seq=16151 receive_seq=16151 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993102 heater_bed: target=80 temp=80.0 pwm=0.302 sd_pos=51255 sysload=0.23 cputime=50.630 memavail=7293384 print_time=1349.916 buffer_time=2.084 print_stall=0 extruder: target=240 temp=240.1 pwm=0.343
Stats 789816.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=510875 bytes_read=341699 bytes_retransmit=9 bytes_invalid=0 send_seq=16185 receive_seq=16185 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993092 heater_bed: target=80 temp=80.0 pwm=0.302 sd_pos=51373 sysload=0.23 cputime=50.680 memavail=7293384 print_time=1351.068 buffer_time=2.235 print_stall=0 extruder: target=240 temp=239.8 pwm=0.451
Stats 789817.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=512516 bytes_read=342191 bytes_retransmit=9 bytes_invalid=0 send_seq=16222 receive_seq=16222 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993087 heater_bed: target=80 temp=80.0 pwm=0.384 sd_pos=51501 sysload=0.29 cputime=50.742 memavail=7293384 print_time=1352.221 buffer_time=2.388 print_stall=0 extruder: target=240 temp=239.8 pwm=0.419
Stats 789818.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=514097 bytes_read=342644 bytes_retransmit=9 bytes_invalid=0 send_seq=16257 receive_seq=16257 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993082 heater_bed: target=80 temp=80.0 pwm=0.384 sd_pos=51642 sysload=0.29 cputime=50.795 memavail=7293388 print_time=1353.373 buffer_time=2.539 print_stall=0 extruder: target=240 temp=240.0 pwm=0.287
Stats 789819.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=515040 bytes_read=343062 bytes_retransmit=9 bytes_invalid=0 send_seq=16282 receive_seq=16282 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993084 heater_bed: target=80 temp=80.0 pwm=0.433 sd_pos=51700 sysload=0.29 cputime=50.852 memavail=7293388 print_time=1353.955 buffer_time=2.119 print_stall=0 extruder: target=240 temp=240.0 pwm=0.368
Stats 789820.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=516747 bytes_read=343549 bytes_retransmit=9 bytes_invalid=0 send_seq=16321 receive_seq=16321 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993081 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=51818 sysload=0.29 cputime=50.912 memavail=7293388 print_time=1355.128 buffer_time=2.291 print_stall=0 extruder: target=240 temp=239.8 pwm=0.457
Stats 789821.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=518387 bytes_read=344012 bytes_retransmit=9 bytes_invalid=0 send_seq=16358 receive_seq=16358 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993079 heater_bed: target=80 temp=80.0 pwm=0.394 sd_pos=51907 sysload=0.29 cputime=50.965 memavail=7293060 print_time=1356.071 buffer_time=2.233 print_stall=0 extruder: target=240 temp=240.1 pwm=0.321
Stats 789822.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=519402 bytes_read=344445 bytes_retransmit=9 bytes_invalid=0 send_seq=16383 receive_seq=16383 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993075 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=51991 sysload=0.27 cputime=51.023 memavail=7293164 print_time=1356.924 buffer_time=2.086 print_stall=0 extruder: target=240 temp=239.9 pwm=0.418
Stats 789823.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=521000 bytes_read=344917 bytes_retransmit=9 bytes_invalid=0 send_seq=16419 receive_seq=16419 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993077 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=52109 sysload=0.27 cputime=51.087 memavail=7293164 print_time=1358.159 buffer_time=2.320 print_stall=0 extruder: target=240 temp=240.0 pwm=0.362
Stats 789824.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=522585 bytes_read=345375 bytes_retransmit=9 bytes_invalid=0 send_seq=16455 receive_seq=16455 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993076 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=52226 sysload=0.27 cputime=51.148 memavail=7293164 print_time=1359.436 buffer_time=2.596 print_stall=0 extruder: target=240 temp=240.1 pwm=0.321
Stats 789825.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=523471 bytes_read=345793 bytes_retransmit=9 bytes_invalid=0 send_seq=16480 receive_seq=16480 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993072 heater_bed: target=80 temp=80.0 pwm=0.248 sd_pos=52284 sysload=0.27 cputime=51.200 memavail=7292940 print_time=1360.101 buffer_time=2.261 print_stall=0 extruder: target=240 temp=240.0 pwm=0.380
Stats 789826.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=525102 bytes_read=346275 bytes_retransmit=9 bytes_invalid=0 send_seq=16518 receive_seq=16518 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119993067 heater_bed: target=80 temp=80.0 pwm=0.332 sd_pos=52399 sysload=0.27 cputime=51.256 memavail=7292940 print_time=1361.453 buffer_time=2.612 print_stall=0 extruder: target=240 temp=240.2 pwm=0.299
Stats 789827.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=526015 bytes_read=346684 bytes_retransmit=9 bytes_invalid=0 send_seq=16542 receive_seq=16542 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993063 heater_bed: target=80 temp=80.1 pwm=0.268 sd_pos=52456 sysload=0.24 cputime=51.315 memavail=7292940 print_time=1362.139 buffer_time=2.298 print_stall=0 extruder: target=240 temp=240.6 pwm=0.133
Stats 789828.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=526918 bytes_read=347099 bytes_retransmit=9 bytes_invalid=0 send_seq=16568 receive_seq=16568 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993060 heater_bed: target=80 temp=80.1 pwm=0.353 sd_pos=52513 sysload=0.24 cputime=51.376 memavail=7292940 print_time=1362.852 buffer_time=2.010 print_stall=0 extruder: target=240 temp=239.9 pwm=0.429
Stats 789829.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=528538 bytes_read=347570 bytes_retransmit=9 bytes_invalid=0 send_seq=16605 receive_seq=16605 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993104 heater_bed: target=80 temp=80.1 pwm=0.287 sd_pos=52629 sysload=0.24 cputime=51.442 memavail=7292940 print_time=1364.292 buffer_time=2.449 print_stall=0 extruder: target=240 temp=240.0 pwm=0.321
Stats 789830.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=529419 bytes_read=347963 bytes_retransmit=9 bytes_invalid=0 send_seq=16628 receive_seq=16628 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993097 heater_bed: target=80 temp=80.1 pwm=0.402 sd_pos=52685 sysload=0.24 cputime=51.492 memavail=7292940 print_time=1365.019 buffer_time=2.175 print_stall=0 extruder: target=240 temp=240.1 pwm=0.321
Stats 789831.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=531134 bytes_read=348446 bytes_retransmit=9 bytes_invalid=0 send_seq=16666 receive_seq=16666 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993086 heater_bed: target=80 temp=80.0 pwm=0.485 sd_pos=52812 sysload=0.24 cputime=51.550 memavail=7292688 print_time=1366.514 buffer_time=2.670 print_stall=0 extruder: target=240 temp=240.1 pwm=0.313
Stats 789832.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=532069 bytes_read=348888 bytes_retransmit=9 bytes_invalid=0 send_seq=16693 receive_seq=16693 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993083 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=52871 sysload=0.22 cputime=51.611 memavail=7292692 print_time=1367.281 buffer_time=2.436 print_stall=0 extruder: target=240 temp=240.1 pwm=0.259
Stats 789833.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=532966 bytes_read=349281 bytes_retransmit=9 bytes_invalid=0 send_seq=16716 receive_seq=16716 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993126 heater_bed: target=80 temp=80.0 pwm=0.368 sd_pos=52928 sysload=0.22 cputime=51.666 memavail=7292692 print_time=1368.039 buffer_time=2.194 print_stall=0 extruder: target=240 temp=239.8 pwm=0.436
Stats 789834.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=534540 bytes_read=349754 bytes_retransmit=9 bytes_invalid=0 send_seq=16752 receive_seq=16752 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993118 heater_bed: target=80 temp=80.0 pwm=0.384 sd_pos=53045 sysload=0.22 cputime=51.720 memavail=7292692 print_time=1369.589 buffer_time=2.743 print_stall=0 extruder: target=240 temp=240.0 pwm=0.337
Stats 789835.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=535435 bytes_read=350176 bytes_retransmit=9 bytes_invalid=0 send_seq=16778 receive_seq=16778 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993112 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=53104 sysload=0.22 cputime=51.770 memavail=7292692 print_time=1370.379 buffer_time=2.532 print_stall=0 extruder: target=240 temp=240.3 pwm=0.218
Stats 789836.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=536355 bytes_read=350574 bytes_retransmit=9 bytes_invalid=0 send_seq=16802 receive_seq=16802 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993106 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=53161 sysload=0.22 cputime=51.827 memavail=7292692 print_time=1371.157 buffer_time=2.309 print_stall=0 extruder: target=240 temp=239.8 pwm=0.399
Stats 789837.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=537277 bytes_read=351007 bytes_retransmit=9 bytes_invalid=0 send_seq=16827 receive_seq=16827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993109 heater_bed: target=80 temp=80.0 pwm=0.342 sd_pos=53217 sysload=0.21 cputime=51.887 memavail=7292104 print_time=1371.954 buffer_time=2.106 print_stall=0 extruder: target=240 temp=240.1 pwm=0.329
Stats 789838.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=538866 bytes_read=351474 bytes_retransmit=9 bytes_invalid=0 send_seq=16862 receive_seq=16862 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119993155 heater_bed: target=80 temp=80.0 pwm=0.361 sd_pos=53331 sysload=0.21 cputime=51.954 memavail=7292136 print_time=1373.537 buffer_time=2.688 print_stall=0 extruder: target=240 temp=240.0 pwm=0.329
Stats 789839.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=539826 bytes_read=351872 bytes_retransmit=9 bytes_invalid=0 send_seq=16886 receive_seq=16886 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993145 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=53388 sysload=0.21 cputime=52.009 memavail=7292136 print_time=1374.323 buffer_time=2.473 print_stall=0 extruder: target=240 temp=239.8 pwm=0.437
Stats 789840.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=540723 bytes_read=352295 bytes_retransmit=9 bytes_invalid=0 send_seq=16912 receive_seq=16912 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993137 heater_bed: target=80 temp=80.0 pwm=0.356 sd_pos=53445 sysload=0.21 cputime=52.068 memavail=7292392 print_time=1375.123 buffer_time=2.272 print_stall=0 extruder: target=240 temp=239.8 pwm=0.425
Stats 789841.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=541640 bytes_read=352717 bytes_retransmit=9 bytes_invalid=0 send_seq=16938 receive_seq=16938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993140 heater_bed: target=80 temp=79.9 pwm=0.426 sd_pos=53503 sysload=0.21 cputime=52.122 memavail=7292140 print_time=1375.908 buffer_time=2.057 print_stall=0 extruder: target=240 temp=240.0 pwm=0.346
Stats 789842.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=543153 bytes_read=353175 bytes_retransmit=9 bytes_invalid=0 send_seq=16971 receive_seq=16971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993174 heater_bed: target=80 temp=79.9 pwm=0.426 sd_pos=53617 sysload=0.19 cputime=52.181 memavail=7292164 print_time=1377.494 buffer_time=2.642 print_stall=0 extruder: target=240 temp=239.8 pwm=0.406
Stats 789843.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=544111 bytes_read=353598 bytes_retransmit=9 bytes_invalid=0 send_seq=16997 receive_seq=16997 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993163 heater_bed: target=80 temp=79.9 pwm=0.509 sd_pos=53674 sysload=0.19 cputime=52.237 memavail=7292164 print_time=1378.293 buffer_time=2.442 print_stall=0 extruder: target=240 temp=240.1 pwm=0.346
Stats 789844.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=545052 bytes_read=354015 bytes_retransmit=9 bytes_invalid=0 send_seq=17022 receive_seq=17022 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993151 heater_bed: target=80 temp=79.9 pwm=0.488 sd_pos=53732 sysload=0.19 cputime=52.290 memavail=7292164 print_time=1379.079 buffer_time=2.227 print_stall=0 extruder: target=240 temp=240.1 pwm=0.316
Stats 789845.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=545923 bytes_read=354408 bytes_retransmit=9 bytes_invalid=0 send_seq=17045 receive_seq=17045 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993143 heater_bed: target=80 temp=79.9 pwm=0.488 sd_pos=53790 sysload=0.19 cputime=52.343 memavail=7292164 print_time=1379.879 buffer_time=2.026 print_stall=0 extruder: target=240 temp=240.1 pwm=0.330
Stats 789846.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=547479 bytes_read=354881 bytes_retransmit=9 bytes_invalid=0 send_seq=17081 receive_seq=17081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119993137 heater_bed: target=80 temp=79.8 pwm=0.488 sd_pos=53927 sysload=0.19 cputime=52.409 memavail=7292164 print_time=1381.464 buffer_time=2.611 print_stall=0 extruder: target=240 temp=240.1 pwm=0.311
Stats 789847.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=548406 bytes_read=355308 bytes_retransmit=9 bytes_invalid=0 send_seq=17105 receive_seq=17105 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993128 heater_bed: target=80 temp=79.9 pwm=0.371 sd_pos=53982 sysload=0.17 cputime=52.469 memavail=7292164 print_time=1382.250 buffer_time=2.396 print_stall=0 extruder: target=240 temp=239.8 pwm=0.447
Stats 789848.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=549286 bytes_read=355696 bytes_retransmit=9 bytes_invalid=0 send_seq=17127 receive_seq=17127 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993125 heater_bed: target=80 temp=79.9 pwm=0.316 sd_pos=54040 sysload=0.17 cputime=52.524 memavail=7292164 print_time=1383.049 buffer_time=2.195 print_stall=0 extruder: target=240 temp=239.9 pwm=0.356
Stats 789849.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=550911 bytes_read=356184 bytes_retransmit=9 bytes_invalid=0 send_seq=17166 receive_seq=17166 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119993115 heater_bed: target=80 temp=79.9 pwm=0.238 sd_pos=54152 sysload=0.17 cputime=52.581 memavail=7292164 print_time=1384.635 buffer_time=2.780 print_stall=0 extruder: target=240 temp=239.9 pwm=0.415
Stats 789850.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=551912 bytes_read=356606 bytes_retransmit=9 bytes_invalid=0 send_seq=17192 receive_seq=17192 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993104 heater_bed: target=80 temp=79.9 pwm=0.337 sd_pos=54205 sysload=0.17 cputime=52.638 memavail=7292164 print_time=1385.421 buffer_time=2.566 print_stall=0 extruder: target=240 temp=239.8 pwm=0.454
Stats 789851.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=552772 bytes_read=356999 bytes_retransmit=9 bytes_invalid=0 send_seq=17215 receive_seq=17215 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993099 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=54262 sysload=0.17 cputime=52.689 memavail=7292164 print_time=1386.220 buffer_time=2.365 print_stall=0 extruder: target=240 temp=239.9 pwm=0.332
Stats 789852.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=553719 bytes_read=357442 bytes_retransmit=9 bytes_invalid=0 send_seq=17242 receive_seq=17242 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993090 heater_bed: target=80 temp=79.9 pwm=0.271 sd_pos=54315 sysload=0.16 cputime=52.743 memavail=7291948 print_time=1387.006 buffer_time=2.150 print_stall=0 extruder: target=240 temp=240.0 pwm=0.314
Stats 789853.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=555295 bytes_read=357904 bytes_retransmit=9 bytes_invalid=0 send_seq=17276 receive_seq=17276 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119993084 heater_bed: target=80 temp=79.9 pwm=0.434 sd_pos=54425 sysload=0.16 cputime=52.796 memavail=7291948 print_time=1388.591 buffer_time=2.735 print_stall=0 extruder: target=240 temp=240.1 pwm=0.314
Stats 789854.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=556178 bytes_read=358297 bytes_retransmit=9 bytes_invalid=0 send_seq=17299 receive_seq=17299 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993080 heater_bed: target=80 temp=79.9 pwm=0.434 sd_pos=54482 sysload=0.16 cputime=52.854 memavail=7292108 print_time=1389.391 buffer_time=2.534 print_stall=0 extruder: target=240 temp=240.1 pwm=0.315
Stats 789855.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=557065 bytes_read=358719 bytes_retransmit=9 bytes_invalid=0 send_seq=17322 receive_seq=17322 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993076 heater_bed: target=80 temp=79.9 pwm=0.434 sd_pos=54538 sysload=0.16 cputime=52.911 memavail=7292204 print_time=1390.177 buffer_time=2.319 print_stall=0 extruder: target=240 temp=239.9 pwm=0.399
Stats 789856.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=557976 bytes_read=359117 bytes_retransmit=9 bytes_invalid=0 send_seq=17346 receive_seq=17346 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993069 heater_bed: target=80 temp=79.9 pwm=0.414 sd_pos=54595 sysload=0.16 cputime=52.962 memavail=7291756 print_time=1390.976 buffer_time=2.117 print_stall=0 extruder: target=240 temp=240.4 pwm=0.210
Stats 789857.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=559548 bytes_read=359580 bytes_retransmit=9 bytes_invalid=0 send_seq=17380 receive_seq=17380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993064 heater_bed: target=80 temp=79.9 pwm=0.306 sd_pos=54707 sysload=0.23 cputime=53.031 memavail=7293640 print_time=1392.562 buffer_time=2.695 print_stall=0 extruder: target=240 temp=240.3 pwm=0.246
Stats 789858.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=560490 bytes_read=360017 bytes_retransmit=9 bytes_invalid=0 send_seq=17406 receive_seq=17406 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993054 heater_bed: target=80 temp=79.9 pwm=0.469 sd_pos=54763 sysload=0.23 cputime=53.095 memavail=7293736 print_time=1393.348 buffer_time=2.480 print_stall=0 extruder: target=240 temp=239.8 pwm=0.450
Stats 789859.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=561389 bytes_read=360420 bytes_retransmit=9 bytes_invalid=0 send_seq=17431 receive_seq=17431 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993045 heater_bed: target=80 temp=79.9 pwm=0.426 sd_pos=54820 sysload=0.23 cputime=53.155 memavail=7293736 print_time=1394.147 buffer_time=2.279 print_stall=0 extruder: target=240 temp=239.5 pwm=0.537
Stats 789860.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=562315 bytes_read=360818 bytes_retransmit=9 bytes_invalid=0 send_seq=17455 receive_seq=17455 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993045 heater_bed: target=80 temp=79.9 pwm=0.454 sd_pos=54875 sysload=0.23 cputime=53.218 memavail=7293736 print_time=1394.933 buffer_time=2.064 print_stall=0 extruder: target=240 temp=239.9 pwm=0.325
Stats 789861.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=563926 bytes_read=361305 bytes_retransmit=9 bytes_invalid=0 send_seq=17491 receive_seq=17491 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993037 heater_bed: target=80 temp=79.9 pwm=0.372 sd_pos=54988 sysload=0.23 cputime=53.275 memavail=7294372 print_time=1396.518 buffer_time=2.649 print_stall=0 extruder: target=240 temp=240.1 pwm=0.226
Stats 789862.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=564859 bytes_read=361723 bytes_retransmit=9 bytes_invalid=0 send_seq=17516 receive_seq=17516 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993034 heater_bed: target=80 temp=79.9 pwm=0.330 sd_pos=55043 sysload=0.21 cputime=53.339 memavail=7294496 print_time=1397.318 buffer_time=2.448 print_stall=0 extruder: target=240 temp=240.2 pwm=0.250
Stats 789863.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=565783 bytes_read=362129 bytes_retransmit=9 bytes_invalid=0 send_seq=17541 receive_seq=17541 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993032 heater_bed: target=80 temp=79.9 pwm=0.448 sd_pos=55098 sysload=0.21 cputime=53.397 memavail=7294496 print_time=1398.104 buffer_time=2.231 print_stall=0 extruder: target=240 temp=239.9 pwm=0.371
Stats 789864.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=566651 bytes_read=362547 bytes_retransmit=9 bytes_invalid=0 send_seq=17565 receive_seq=17565 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993027 heater_bed: target=80 temp=79.9 pwm=0.370 sd_pos=55153 sysload=0.21 cputime=53.457 memavail=7294272 print_time=1398.903 buffer_time=2.028 print_stall=0 extruder: target=240 temp=240.1 pwm=0.306
Stats 789865.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=568251 bytes_read=362993 bytes_retransmit=9 bytes_invalid=0 send_seq=17599 receive_seq=17599 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993022 heater_bed: target=80 temp=79.9 pwm=0.337 sd_pos=55265 sysload=0.21 cputime=53.518 memavail=7294272 print_time=1400.489 buffer_time=2.610 print_stall=0 extruder: target=240 temp=240.0 pwm=0.382
Stats 789866.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=569126 bytes_read=363401 bytes_retransmit=9 bytes_invalid=0 send_seq=17622 receive_seq=17622 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993020 heater_bed: target=80 temp=79.9 pwm=0.417 sd_pos=55320 sysload=0.21 cputime=53.579 memavail=7294272 print_time=1401.274 buffer_time=2.396 print_stall=0 extruder: target=240 temp=240.1 pwm=0.311
Stats 789867.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=570045 bytes_read=363833 bytes_retransmit=9 bytes_invalid=0 send_seq=17647 receive_seq=17647 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993013 heater_bed: target=80 temp=79.9 pwm=0.352 sd_pos=55375 sysload=0.19 cputime=53.648 memavail=7293468 print_time=1402.074 buffer_time=2.195 print_stall=0 extruder: target=240 temp=239.9 pwm=0.353
Stats 789868.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=571636 bytes_read=364286 bytes_retransmit=9 bytes_invalid=0 send_seq=17682 receive_seq=17682 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119993013 heater_bed: target=80 temp=79.9 pwm=0.356 sd_pos=55486 sysload=0.19 cputime=53.699 memavail=7293548 print_time=1403.659 buffer_time=2.780 print_stall=0 extruder: target=240 temp=239.8 pwm=0.428
Stats 789869.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=572571 bytes_read=364699 bytes_retransmit=9 bytes_invalid=0 send_seq=17706 receive_seq=17706 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993007 heater_bed: target=80 temp=79.9 pwm=0.472 sd_pos=55541 sysload=0.19 cputime=53.738 memavail=7293548 print_time=1404.445 buffer_time=2.565 print_stall=0 extruder: target=240 temp=240.0 pwm=0.293
Stats 789870.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=573480 bytes_read=365121 bytes_retransmit=9 bytes_invalid=0 send_seq=17732 receive_seq=17732 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993002 heater_bed: target=80 temp=79.9 pwm=0.395 sd_pos=55596 sysload=0.19 cputime=53.783 memavail=7293548 print_time=1405.245 buffer_time=2.364 print_stall=0 extruder: target=240 temp=240.1 pwm=0.283
Stats 789871.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=574358 bytes_read=365514 bytes_retransmit=9 bytes_invalid=0 send_seq=17755 receive_seq=17755 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992994 heater_bed: target=80 temp=79.9 pwm=0.401 sd_pos=55651 sysload=0.19 cputime=53.828 memavail=7293740 print_time=1406.031 buffer_time=2.149 print_stall=0 extruder: target=240 temp=240.1 pwm=0.283
Stats 789872.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=575928 bytes_read=365997 bytes_retransmit=9 bytes_invalid=0 send_seq=17790 receive_seq=17790 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119993034 heater_bed: target=80 temp=79.9 pwm=0.450 sd_pos=55762 sysload=0.26 cputime=53.866 memavail=7293800 print_time=1407.616 buffer_time=2.734 print_stall=0 extruder: target=240 temp=240.0 pwm=0.382
Stats 789873.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=576841 bytes_read=366409 bytes_retransmit=9 bytes_invalid=0 send_seq=17814 receive_seq=17814 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993039 heater_bed: target=80 temp=79.9 pwm=0.346 sd_pos=55817 sysload=0.26 cputime=53.914 memavail=7293800 print_time=1408.416 buffer_time=2.533 print_stall=0 extruder: target=240 temp=239.8 pwm=0.382
Stats 789874.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=577705 bytes_read=366797 bytes_retransmit=9 bytes_invalid=0 send_seq=17836 receive_seq=17836 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993036 heater_bed: target=80 temp=79.9 pwm=0.436 sd_pos=55884 sysload=0.26 cputime=53.957 memavail=7293800 print_time=1409.201 buffer_time=2.318 print_stall=0 extruder: target=240 temp=240.0 pwm=0.382
Stats 789875.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=578576 bytes_read=367210 bytes_retransmit=9 bytes_invalid=0 send_seq=17860 receive_seq=17860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993034 heater_bed: target=80 temp=79.9 pwm=0.350 sd_pos=55952 sysload=0.26 cputime=54.014 memavail=7293800 print_time=1410.001 buffer_time=2.117 print_stall=0 extruder: target=240 temp=240.1 pwm=0.285
Stats 789876.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=580153 bytes_read=367682 bytes_retransmit=9 bytes_invalid=0 send_seq=17896 receive_seq=17896 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993034 heater_bed: target=80 temp=79.9 pwm=0.417 sd_pos=56062 sysload=0.26 cputime=54.080 memavail=7293800 print_time=1411.586 buffer_time=2.701 print_stall=0 extruder: target=240 temp=240.1 pwm=0.295
Stats 789877.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=581133 bytes_read=368100 bytes_retransmit=9 bytes_invalid=0 send_seq=17921 receive_seq=17921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993030 heater_bed: target=80 temp=79.9 pwm=0.363 sd_pos=56117 sysload=0.24 cputime=54.136 memavail=7293800 print_time=1412.372 buffer_time=2.487 print_stall=0 extruder: target=240 temp=240.0 pwm=0.383
Stats 789878.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=582049 bytes_read=368523 bytes_retransmit=9 bytes_invalid=0 send_seq=17947 receive_seq=17947 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993026 heater_bed: target=80 temp=79.9 pwm=0.363 sd_pos=56184 sysload=0.24 cputime=54.186 memavail=7293800 print_time=1413.172 buffer_time=2.286 print_stall=0 extruder: target=240 temp=240.1 pwm=0.329
Stats 789879.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=582929 bytes_read=368935 bytes_retransmit=9 bytes_invalid=0 send_seq=17971 receive_seq=17971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993021 heater_bed: target=80 temp=79.9 pwm=0.453 sd_pos=56239 sysload=0.24 cputime=54.238 memavail=7293800 print_time=1413.957 buffer_time=2.071 print_stall=0 extruder: target=240 temp=239.9 pwm=0.379
Stats 789880.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=584489 bytes_read=369378 bytes_retransmit=9 bytes_invalid=0 send_seq=18004 receive_seq=18004 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993020 heater_bed: target=80 temp=79.9 pwm=0.334 sd_pos=56347 sysload=0.24 cputime=54.289 memavail=7293800 print_time=1415.543 buffer_time=2.656 print_stall=0 extruder: target=240 temp=239.8 pwm=0.379
Stats 789881.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=585389 bytes_read=369781 bytes_retransmit=9 bytes_invalid=0 send_seq=18026 receive_seq=18026 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993059 heater_bed: target=80 temp=79.9 pwm=0.415 sd_pos=56400 sysload=0.24 cputime=54.342 memavail=7293548 print_time=1416.342 buffer_time=2.455 print_stall=0 extruder: target=240 temp=240.0 pwm=0.379
Stats 789882.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=586313 bytes_read=370208 bytes_retransmit=9 bytes_invalid=0 send_seq=18050 receive_seq=18050 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993055 heater_bed: target=80 temp=80.0 pwm=0.322 sd_pos=56455 sysload=0.22 cputime=54.397 memavail=7293552 print_time=1417.128 buffer_time=2.240 print_stall=0 extruder: target=240 temp=240.0 pwm=0.342
Stats 789883.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=587194 bytes_read=370606 bytes_retransmit=9 bytes_invalid=0 send_seq=18074 receive_seq=18074 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993049 heater_bed: target=80 temp=79.9 pwm=0.388 sd_pos=56508 sysload=0.22 cputime=54.450 memavail=7293552 print_time=1417.928 buffer_time=2.039 print_stall=0 extruder: target=240 temp=240.2 pwm=0.285
Stats 789884.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=588784 bytes_read=371089 bytes_retransmit=9 bytes_invalid=0 send_seq=18112 receive_seq=18112 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119993046 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=56618 sysload=0.22 cputime=54.513 memavail=7293556 print_time=1419.513 buffer_time=2.624 print_stall=0 extruder: target=240 temp=240.0 pwm=0.372
Stats 789885.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=589728 bytes_read=371506 bytes_retransmit=9 bytes_invalid=0 send_seq=18137 receive_seq=18137 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993076 heater_bed: target=80 temp=79.9 pwm=0.398 sd_pos=56674 sysload=0.22 cputime=54.567 memavail=7293556 print_time=1420.299 buffer_time=2.409 print_stall=0 extruder: target=240 temp=239.9 pwm=0.367
Stats 789886.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=590556 bytes_read=371899 bytes_retransmit=9 bytes_invalid=0 send_seq=18160 receive_seq=18160 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993067 heater_bed: target=80 temp=79.9 pwm=0.398 sd_pos=56729 sysload=0.22 cputime=54.621 memavail=7293556 print_time=1421.099 buffer_time=2.208 print_stall=0 extruder: target=240 temp=239.9 pwm=0.377
Stats 789887.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=592120 bytes_read=372392 bytes_retransmit=9 bytes_invalid=0 send_seq=18197 receive_seq=18197 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119993061 heater_bed: target=80 temp=79.9 pwm=0.473 sd_pos=56839 sysload=0.20 cputime=54.687 memavail=7293556 print_time=1422.684 buffer_time=2.792 print_stall=0 extruder: target=240 temp=239.9 pwm=0.369
Stats 789888.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=593113 bytes_read=372814 bytes_retransmit=9 bytes_invalid=0 send_seq=18223 receive_seq=18223 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119993055 heater_bed: target=80 temp=79.9 pwm=0.455 sd_pos=56895 sysload=0.20 cputime=54.744 memavail=7293556 print_time=1423.470 buffer_time=2.577 print_stall=0 extruder: target=240 temp=240.1 pwm=0.318
Stats 789889.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=593944 bytes_read=373207 bytes_retransmit=9 bytes_invalid=0 send_seq=18246 receive_seq=18246 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993050 heater_bed: target=80 temp=79.9 pwm=0.436 sd_pos=56951 sysload=0.20 cputime=54.793 memavail=7293556 print_time=1424.269 buffer_time=2.376 print_stall=0 extruder: target=240 temp=240.3 pwm=0.262
Stats 789890.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=594869 bytes_read=373620 bytes_retransmit=9 bytes_invalid=0 send_seq=18270 receive_seq=18270 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993107 heater_bed: target=80 temp=80.0 pwm=0.370 sd_pos=57006 sysload=0.20 cputime=54.847 memavail=7293556 print_time=1425.055 buffer_time=2.161 print_stall=0 extruder: target=240 temp=240.0 pwm=0.392
Stats 789891.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=596347 bytes_read=374077 bytes_retransmit=9 bytes_invalid=0 send_seq=18303 receive_seq=18303 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993097 heater_bed: target=80 temp=79.9 pwm=0.431 sd_pos=57128 sysload=0.20 cputime=54.898 memavail=7293304 print_time=1426.641 buffer_time=2.746 print_stall=0 extruder: target=240 temp=239.8 pwm=0.392
Stats 789892.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=597211 bytes_read=374485 bytes_retransmit=9 bytes_invalid=0 send_seq=18326 receive_seq=18326 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993088 heater_bed: target=80 temp=79.9 pwm=0.431 sd_pos=57184 sysload=0.18 cputime=54.952 memavail=7293304 print_time=1427.440 buffer_time=2.545 print_stall=0 extruder: target=240 temp=239.9 pwm=0.337
Stats 789893.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=598095 bytes_read=374893 bytes_retransmit=9 bytes_invalid=0 send_seq=18349 receive_seq=18349 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993088 heater_bed: target=80 temp=79.9 pwm=0.394 sd_pos=57239 sysload=0.18 cputime=55.006 memavail=7293304 print_time=1428.226 buffer_time=2.331 print_stall=0 extruder: target=240 temp=240.0 pwm=0.316
Stats 789894.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=598900 bytes_read=375295 bytes_retransmit=9 bytes_invalid=0 send_seq=18371 receive_seq=18371 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993086 heater_bed: target=80 temp=80.0 pwm=0.394 sd_pos=57294 sysload=0.18 cputime=55.051 memavail=7293304 print_time=1429.026 buffer_time=2.130 print_stall=0 extruder: target=240 temp=240.1 pwm=0.316
Stats 789895.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=600356 bytes_read=375743 bytes_retransmit=9 bytes_invalid=0 send_seq=18405 receive_seq=18405 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119993080 heater_bed: target=80 temp=80.0 pwm=0.338 sd_pos=57405 sysload=0.18 cputime=55.102 memavail=7293080 print_time=1430.611 buffer_time=2.714 print_stall=0 extruder: target=240 temp=240.1 pwm=0.368
Stats 789896.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=601310 bytes_read=376161 bytes_retransmit=9 bytes_invalid=0 send_seq=18430 receive_seq=18430 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993071 heater_bed: target=80 temp=80.0 pwm=0.344 sd_pos=57460 sysload=0.18 cputime=55.162 memavail=7293080 print_time=1431.397 buffer_time=2.500 print_stall=0 extruder: target=240 temp=240.1 pwm=0.307
Stats 789897.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=602173 bytes_read=376588 bytes_retransmit=9 bytes_invalid=0 send_seq=18454 receive_seq=18454 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993063 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=57515 sysload=0.25 cputime=55.230 memavail=7293052 print_time=1432.196 buffer_time=2.298 print_stall=0 extruder: target=240 temp=240.0 pwm=0.308
Stats 789898.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=603036 bytes_read=376986 bytes_retransmit=9 bytes_invalid=0 send_seq=18478 receive_seq=18478 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993060 heater_bed: target=80 temp=80.0 pwm=0.373 sd_pos=57570 sysload=0.25 cputime=55.288 memavail=7293052 print_time=1432.982 buffer_time=2.084 print_stall=0 extruder: target=240 temp=239.9 pwm=0.412
Stats 789899.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=604597 bytes_read=377441 bytes_retransmit=9 bytes_invalid=0 send_seq=18512 receive_seq=18512 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993060 heater_bed: target=80 temp=80.0 pwm=0.402 sd_pos=57844 sysload=0.25 cputime=55.359 memavail=7293052 print_time=1434.608 buffer_time=2.709 print_stall=0 extruder: target=240 temp=239.8 pwm=0.460
Stats 789900.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=605627 bytes_read=377855 bytes_retransmit=9 bytes_invalid=0 send_seq=18538 receive_seq=18538 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993056 heater_bed: target=80 temp=80.0 pwm=0.333 sd_pos=57873 sysload=0.25 cputime=55.415 memavail=7293052 print_time=1435.118 buffer_time=2.219 print_stall=0 extruder: target=240 temp=239.9 pwm=0.345
Stats 789901.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=606572 bytes_read=378252 bytes_retransmit=9 bytes_invalid=0 send_seq=18562 receive_seq=18562 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993052 heater_bed: target=80 temp=80.0 pwm=0.359 sd_pos=57952 sysload=0.25 cputime=55.476 memavail=7292800 print_time=1436.088 buffer_time=2.188 print_stall=0 extruder: target=240 temp=240.0 pwm=0.345
Stats 789902.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=608100 bytes_read=378730 bytes_retransmit=9 bytes_invalid=0 send_seq=18596 receive_seq=18596 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119993049 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=58071 sysload=0.23 cputime=55.539 memavail=7292812 print_time=1437.417 buffer_time=2.516 print_stall=0 extruder: target=240 temp=239.9 pwm=0.375
Stats 789903.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=609002 bytes_read=379147 bytes_retransmit=9 bytes_invalid=0 send_seq=18621 receive_seq=18621 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993045 heater_bed: target=80 temp=80.0 pwm=0.382 sd_pos=58138 sysload=0.23 cputime=55.595 memavail=7292812 print_time=1438.028 buffer_time=2.126 print_stall=0 extruder: target=240 temp=240.1 pwm=0.307
Stats 789904.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=610473 bytes_read=379585 bytes_retransmit=9 bytes_invalid=0 send_seq=18653 receive_seq=18653 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993041 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=58247 sysload=0.23 cputime=55.650 memavail=7292812 print_time=1439.145 buffer_time=2.242 print_stall=0 extruder: target=240 temp=240.1 pwm=0.307
Stats 789905.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=611964 bytes_read=380043 bytes_retransmit=9 bytes_invalid=0 send_seq=18686 receive_seq=18686 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993038 heater_bed: target=80 temp=80.0 pwm=0.364 sd_pos=58355 sysload=0.23 cputime=55.705 memavail=7292812 print_time=1440.120 buffer_time=2.217 print_stall=0 extruder: target=240 temp=240.2 pwm=0.245
Stats 789906.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=613428 bytes_read=380505 bytes_retransmit=9 bytes_invalid=0 send_seq=18720 receive_seq=18720 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993036 heater_bed: target=80 temp=80.0 pwm=0.364 sd_pos=58463 sysload=0.23 cputime=55.767 memavail=7292812 print_time=1440.954 buffer_time=2.050 print_stall=0 extruder: target=240 temp=239.9 pwm=0.378
Stats 789907.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=616093 bytes_read=381058 bytes_retransmit=9 bytes_invalid=0 send_seq=18772 receive_seq=18772 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993033 heater_bed: target=80 temp=80.1 pwm=0.236 sd_pos=58672 sysload=0.21 cputime=55.836 memavail=7292812 print_time=1442.199 buffer_time=2.294 print_stall=0 extruder: target=240 temp=239.8 pwm=0.400
Stats 789908.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=619470 bytes_read=381671 bytes_retransmit=9 bytes_invalid=0 send_seq=18836 receive_seq=18836 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993028 heater_bed: target=80 temp=80.0 pwm=0.329 sd_pos=59082 sysload=0.21 cputime=55.911 memavail=7292812 print_time=1443.049 buffer_time=2.143 print_stall=0 extruder: target=240 temp=240.1 pwm=0.315
Stats 789909.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=620983 bytes_read=382143 bytes_retransmit=9 bytes_invalid=0 send_seq=18872 receive_seq=18872 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993024 heater_bed: target=80 temp=80.0 pwm=0.333 sd_pos=59193 sysload=0.21 cputime=55.981 memavail=7292812 print_time=1443.995 buffer_time=2.088 print_stall=0 extruder: target=240 temp=240.0 pwm=0.316
Stats 789910.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=623509 bytes_read=382681 bytes_retransmit=9 bytes_invalid=0 send_seq=18924 receive_seq=18924 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119993018 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=59459 sysload=0.21 cputime=56.055 memavail=7292812 print_time=1445.959 buffer_time=3.052 print_stall=0 extruder: target=240 temp=240.3 pwm=0.223
Stats 789911.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=623758 bytes_read=383049 bytes_retransmit=9 bytes_invalid=0 send_seq=18939 receive_seq=18939 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993011 heater_bed: target=80 temp=80.0 pwm=0.357 sd_pos=59459 sysload=0.21 cputime=56.118 memavail=7292336 print_time=1445.959 buffer_time=2.051 print_stall=0 extruder: target=240 temp=240.0 pwm=0.365
Stats 789912.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=627139 bytes_read=383686 bytes_retransmit=9 bytes_invalid=0 send_seq=19005 receive_seq=19005 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993011 heater_bed: target=80 temp=80.1 pwm=0.231 sd_pos=59728 sysload=0.27 cputime=56.194 memavail=7292340 print_time=1447.901 buffer_time=2.992 print_stall=0 extruder: target=240 temp=239.9 pwm=0.382
Stats 789913.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=627932 bytes_read=384089 bytes_retransmit=9 bytes_invalid=0 send_seq=19030 receive_seq=19030 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=40 freq=119993010 heater_bed: target=80 temp=80.1 pwm=0.337 sd_pos=59785 sysload=0.27 cputime=56.259 memavail=7292340 print_time=1448.702 buffer_time=2.793 print_stall=0 extruder: target=240 temp=240.0 pwm=0.356
Stats 789914.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=629264 bytes_read=384537 bytes_retransmit=9 bytes_invalid=0 send_seq=19061 receive_seq=19061 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119993011 heater_bed: target=80 temp=80.1 pwm=0.393 sd_pos=59928 sysload=0.27 cputime=56.326 memavail=7292340 print_time=1449.650 buffer_time=2.741 print_stall=0 extruder: target=240 temp=240.1 pwm=0.344
Stats 789915.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=630076 bytes_read=384949 bytes_retransmit=9 bytes_invalid=0 send_seq=19085 receive_seq=19085 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993014 heater_bed: target=80 temp=80.0 pwm=0.391 sd_pos=59985 sysload=0.27 cputime=56.392 memavail=7292340 print_time=1450.306 buffer_time=2.396 print_stall=0 extruder: target=240 temp=240.2 pwm=0.272
Stats 789916.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=631973 bytes_read=385427 bytes_retransmit=9 bytes_invalid=0 send_seq=19125 receive_seq=19125 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993013 heater_bed: target=80 temp=80.1 pwm=0.391 sd_pos=60135 sysload=0.27 cputime=56.462 memavail=7292116 print_time=1451.315 buffer_time=2.403 print_stall=0 extruder: target=240 temp=240.1 pwm=0.357
Stats 789917.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=633701 bytes_read=385925 bytes_retransmit=9 bytes_invalid=0 send_seq=19163 receive_seq=19163 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993021 heater_bed: target=80 temp=80.0 pwm=0.370 sd_pos=60255 sysload=0.33 cputime=56.529 memavail=7292116 print_time=1452.222 buffer_time=2.310 print_stall=0 extruder: target=240 temp=240.3 pwm=0.219
Stats 789918.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=636786 bytes_read=386532 bytes_retransmit=9 bytes_invalid=0 send_seq=19226 receive_seq=19226 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993016 heater_bed: target=80 temp=80.0 pwm=0.490 sd_pos=60564 sysload=0.33 cputime=56.596 memavail=7292116 print_time=1453.810 buffer_time=2.898 print_stall=0 extruder: target=240 temp=240.1 pwm=0.349
Stats 789919.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=637678 bytes_read=386930 bytes_retransmit=9 bytes_invalid=0 send_seq=19250 receive_seq=19250 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993023 heater_bed: target=80 temp=80.0 pwm=0.369 sd_pos=60621 sysload=0.33 cputime=56.650 memavail=7291892 print_time=1454.657 buffer_time=2.744 print_stall=0 extruder: target=240 temp=240.1 pwm=0.347
Stats 789920.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=639329 bytes_read=387398 bytes_retransmit=9 bytes_invalid=0 send_seq=19285 receive_seq=19285 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993022 heater_bed: target=80 temp=80.0 pwm=0.362 sd_pos=60832 sysload=0.33 cputime=56.708 memavail=7291892 print_time=1455.770 buffer_time=2.856 print_stall=0 extruder: target=240 temp=240.0 pwm=0.347
Stats 789921.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=640413 bytes_read=387830 bytes_retransmit=9 bytes_invalid=0 send_seq=19313 receive_seq=19313 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993020 heater_bed: target=80 temp=80.0 pwm=0.362 sd_pos=60888 sysload=0.33 cputime=56.774 memavail=7291892 print_time=1456.479 buffer_time=2.566 print_stall=0 extruder: target=240 temp=240.0 pwm=0.344
Stats 789922.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=642855 bytes_read=388373 bytes_retransmit=9 bytes_invalid=0 send_seq=19363 receive_seq=19363 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119993016 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=61439 sysload=0.31 cputime=56.843 memavail=7291896 print_time=1457.698 buffer_time=2.783 print_stall=0 extruder: target=240 temp=239.8 pwm=0.415
Stats 789923.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=643750 bytes_read=388781 bytes_retransmit=9 bytes_invalid=0 send_seq=19386 receive_seq=19386 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=54 upcoming_bytes=30 freq=119993014 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=61688 sysload=0.31 cputime=56.901 memavail=7291896 print_time=1457.936 buffer_time=2.021 print_stall=0 extruder: target=240 temp=240.3 pwm=0.198
Stats 789924.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=644683 bytes_read=389214 bytes_retransmit=9 bytes_invalid=0 send_seq=19412 receive_seq=19412 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=70 freq=119993028 heater_bed: target=80 temp=80.0 pwm=0.319 sd_pos=62048 sysload=0.31 cputime=56.962 memavail=7291896 print_time=1459.322 buffer_time=2.406 print_stall=0 extruder: target=240 temp=240.0 pwm=0.345
Stats 789925.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=645395 bytes_read=389607 bytes_retransmit=9 bytes_invalid=0 send_seq=19435 receive_seq=19435 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=40 freq=119993024 heater_bed: target=80 temp=80.0 pwm=0.319 sd_pos=62163 sysload=0.31 cputime=57.013 memavail=7291896 print_time=1460.968 buffer_time=3.052 print_stall=0 extruder: target=240 temp=240.0 pwm=0.343
Stats 789926.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=645666 bytes_read=389985 bytes_retransmit=9 bytes_invalid=0 send_seq=19452 receive_seq=19452 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993021 heater_bed: target=80 temp=80.1 pwm=0.284 sd_pos=62163 sysload=0.31 cputime=57.065 memavail=7291896 print_time=1460.968 buffer_time=2.051 print_stall=0 extruder: target=240 temp=240.0 pwm=0.325
Stats 789927.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=645945 bytes_read=390367 bytes_retransmit=9 bytes_invalid=0 send_seq=19467 receive_seq=19467 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993018 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=62213 sysload=0.28 cputime=57.130 memavail=7291820 print_time=1461.896 buffer_time=1.979 print_stall=0 extruder: target=240 temp=240.1 pwm=0.325
Stats 789928.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=646865 bytes_read=390755 bytes_retransmit=9 bytes_invalid=0 send_seq=19489 receive_seq=19489 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993023 heater_bed: target=80 temp=80.0 pwm=0.393 sd_pos=62213 sysload=0.28 cputime=57.182 memavail=7291892 print_time=1463.195 buffer_time=2.278 print_stall=0 extruder: target=240 temp=240.0 pwm=0.325
Stats 789929.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=647219 bytes_read=391118 bytes_retransmit=9 bytes_invalid=0 send_seq=19503 receive_seq=19503 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993072 heater_bed: target=80 temp=80.1 pwm=0.316 sd_pos=62241 sysload=0.28 cputime=57.228 memavail=7291892 print_time=1464.681 buffer_time=2.762 print_stall=0 extruder: target=240 temp=239.9 pwm=0.393
Stats 789930.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=647746 bytes_read=391520 bytes_retransmit=9 bytes_invalid=0 send_seq=19525 receive_seq=19525 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993067 heater_bed: target=80 temp=80.1 pwm=0.318 sd_pos=62386 sysload=0.28 cputime=57.277 memavail=7291892 print_time=1465.155 buffer_time=2.236 print_stall=0 extruder: target=240 temp=239.6 pwm=0.472
Stats 789931.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=648777 bytes_read=391928 bytes_retransmit=9 bytes_invalid=0 send_seq=19551 receive_seq=19551 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=10 freq=119993062 heater_bed: target=80 temp=80.1 pwm=0.318 sd_pos=62794 sysload=0.28 cputime=57.333 memavail=7292040 print_time=1466.506 buffer_time=2.587 print_stall=0 extruder: target=240 temp=239.6 pwm=0.415
Stats 789932.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=650549 bytes_read=392421 bytes_retransmit=9 bytes_invalid=0 send_seq=19588 receive_seq=19588 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=60 freq=119993057 heater_bed: target=80 temp=80.1 pwm=0.267 sd_pos=63363 sysload=0.26 cputime=57.389 memavail=7292144 print_time=1467.752 buffer_time=2.832 print_stall=0 extruder: target=240 temp=239.5 pwm=0.415
Stats 789933.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=651131 bytes_read=392813 bytes_retransmit=9 bytes_invalid=0 send_seq=19608 receive_seq=19608 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=90 freq=119993080 heater_bed: target=80 temp=80.1 pwm=0.351 sd_pos=63621 sysload=0.26 cputime=57.441 memavail=7292144 print_time=1468.084 buffer_time=2.163 print_stall=0 extruder: target=240 temp=239.5 pwm=0.441
Stats 789934.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=651854 bytes_read=393209 bytes_retransmit=9 bytes_invalid=0 send_seq=19632 receive_seq=19632 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=60 freq=119993073 heater_bed: target=80 temp=80.1 pwm=0.351 sd_pos=63826 sysload=0.26 cputime=57.490 memavail=7292144 print_time=1469.231 buffer_time=2.310 print_stall=0 extruder: target=240 temp=239.6 pwm=0.380
Stats 789935.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=652608 bytes_read=393614 bytes_retransmit=9 bytes_invalid=0 send_seq=19656 receive_seq=19656 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=30 freq=119993066 heater_bed: target=80 temp=80.1 pwm=0.321 sd_pos=63940 sysload=0.26 cputime=57.553 memavail=7292144 print_time=1470.868 buffer_time=2.946 print_stall=0 extruder: target=240 temp=239.4 pwm=0.515
Stats 789936.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=652911 bytes_read=393989 bytes_retransmit=9 bytes_invalid=0 send_seq=19674 receive_seq=19674 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993059 heater_bed: target=80 temp=80.1 pwm=0.452 sd_pos=63968 sysload=0.26 cputime=57.604 memavail=7292144 print_time=1471.813 buffer_time=2.891 print_stall=0 extruder: target=240 temp=239.5 pwm=0.449
Stats 789937.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=653529 bytes_read=394377 bytes_retransmit=9 bytes_invalid=0 send_seq=19693 receive_seq=19693 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993053 heater_bed: target=80 temp=80.1 pwm=0.459 sd_pos=63993 sysload=0.24 cputime=57.651 memavail=7292144 print_time=1472.418 buffer_time=2.494 print_stall=0 extruder: target=240 temp=239.5 pwm=0.459
Stats 789938.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=654150 bytes_read=394770 bytes_retransmit=9 bytes_invalid=0 send_seq=19713 receive_seq=19713 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993046 heater_bed: target=80 temp=80.1 pwm=0.412 sd_pos=63993 sysload=0.24 cputime=57.698 memavail=7292144 print_time=1473.166 buffer_time=2.242 print_stall=0 extruder: target=240 temp=239.8 pwm=0.362
Stats 789939.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=654570 bytes_read=395157 bytes_retransmit=9 bytes_invalid=0 send_seq=19732 receive_seq=19732 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993040 heater_bed: target=80 temp=80.1 pwm=0.252 sd_pos=64023 sysload=0.24 cputime=57.747 memavail=7292148 print_time=1474.651 buffer_time=2.726 print_stall=0 extruder: target=240 temp=239.8 pwm=0.374
Stats 789940.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=655070 bytes_read=395520 bytes_retransmit=9 bytes_invalid=0 send_seq=19749 receive_seq=19749 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993033 heater_bed: target=80 temp=80.1 pwm=0.415 sd_pos=64179 sysload=0.24 cputime=57.790 memavail=7292148 print_time=1475.131 buffer_time=2.206 print_stall=0 extruder: target=240 temp=240.0 pwm=0.288
Stats 789941.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=656101 bytes_read=395948 bytes_retransmit=9 bytes_invalid=0 send_seq=19776 receive_seq=19776 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=10 freq=119993032 heater_bed: target=80 temp=80.1 pwm=0.361 sd_pos=64583 sysload=0.24 cputime=57.857 memavail=7292148 print_time=1476.491 buffer_time=2.565 print_stall=0 extruder: target=240 temp=239.6 pwm=0.512
Stats 789942.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=658873 bytes_read=396535 bytes_retransmit=9 bytes_invalid=0 send_seq=19832 receive_seq=19832 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=50 freq=119993084 heater_bed: target=80 temp=80.1 pwm=0.338 sd_pos=65079 sysload=0.22 cputime=57.935 memavail=7292148 print_time=1478.118 buffer_time=3.191 print_stall=0 extruder: target=240 temp=239.3 pwm=0.568
Stats 789943.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=659069 bytes_read=396878 bytes_retransmit=9 bytes_invalid=0 send_seq=19845 receive_seq=19845 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=50 freq=119993078 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=65079 sysload=0.22 cputime=57.982 memavail=7292148 print_time=1478.118 buffer_time=2.191 print_stall=0 extruder: target=240 temp=239.3 pwm=0.503
Stats 789944.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=661268 bytes_read=397411 bytes_retransmit=9 bytes_invalid=0 send_seq=19893 receive_seq=19893 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=20 freq=119993069 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=65284 sysload=0.22 cputime=58.050 memavail=7292148 print_time=1479.373 buffer_time=2.445 print_stall=0 extruder: target=240 temp=239.8 pwm=0.285
Stats 789945.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=663747 bytes_read=397958 bytes_retransmit=9 bytes_invalid=0 send_seq=19944 receive_seq=19944 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=30 freq=119993064 heater_bed: target=80 temp=80.0 pwm=0.515 sd_pos=65481 sysload=0.22 cputime=58.116 memavail=7292148 print_time=1480.278 buffer_time=2.349 print_stall=0 extruder: target=240 temp=239.9 pwm=0.370
Stats 789946.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=665686 bytes_read=398436 bytes_retransmit=9 bytes_invalid=0 send_seq=19984 receive_seq=19984 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=30 freq=119993058 heater_bed: target=80 temp=80.0 pwm=0.371 sd_pos=65821 sysload=0.22 cputime=58.175 memavail=7292148 print_time=1481.243 buffer_time=2.314 print_stall=0 extruder: target=240 temp=240.1 pwm=0.297
Stats 789947.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=666621 bytes_read=398864 bytes_retransmit=9 bytes_invalid=0 send_seq=20008 receive_seq=20008 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119993051 heater_bed: target=80 temp=79.9 pwm=0.452 sd_pos=65877 sysload=0.20 cputime=58.227 memavail=7292148 print_time=1482.058 buffer_time=2.128 print_stall=0 extruder: target=240 temp=239.8 pwm=0.536
Stats 789948.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=668064 bytes_read=399331 bytes_retransmit=9 bytes_invalid=0 send_seq=20043 receive_seq=20043 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993044 heater_bed: target=80 temp=79.9 pwm=0.470 sd_pos=65989 sysload=0.20 cputime=58.288 memavail=7292148 print_time=1483.729 buffer_time=2.798 print_stall=0 extruder: target=240 temp=239.8 pwm=0.485
Stats 789949.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=668808 bytes_read=399709 bytes_retransmit=9 bytes_invalid=0 send_seq=20063 receive_seq=20063 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993039 heater_bed: target=80 temp=79.9 pwm=0.410 sd_pos=66046 sysload=0.20 cputime=58.338 memavail=7292148 print_time=1484.564 buffer_time=2.633 print_stall=0 extruder: target=240 temp=239.7 pwm=0.485
Stats 789950.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=669669 bytes_read=400122 bytes_retransmit=9 bytes_invalid=0 send_seq=20087 receive_seq=20087 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993035 heater_bed: target=80 temp=79.9 pwm=0.434 sd_pos=66102 sysload=0.20 cputime=58.394 memavail=7292148 print_time=1485.400 buffer_time=2.468 print_stall=0 extruder: target=240 temp=239.8 pwm=0.453
Stats 789951.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=670490 bytes_read=400534 bytes_retransmit=9 bytes_invalid=0 send_seq=20111 receive_seq=20111 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993079 heater_bed: target=80 temp=79.9 pwm=0.443 sd_pos=66160 sysload=0.20 cputime=58.448 memavail=7292340 print_time=1486.235 buffer_time=2.303 print_stall=0 extruder: target=240 temp=239.9 pwm=0.381
Stats 789952.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=671347 bytes_read=400937 bytes_retransmit=9 bytes_invalid=0 send_seq=20133 receive_seq=20133 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993069 heater_bed: target=80 temp=79.9 pwm=0.454 sd_pos=66216 sysload=0.18 cputime=58.499 memavail=7292400 print_time=1487.071 buffer_time=2.139 print_stall=0 extruder: target=240 temp=239.8 pwm=0.482
Stats 789953.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=672767 bytes_read=401395 bytes_retransmit=9 bytes_invalid=0 send_seq=20166 receive_seq=20166 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993061 heater_bed: target=80 temp=79.9 pwm=0.402 sd_pos=66341 sysload=0.18 cputime=58.554 memavail=7292400 print_time=1488.742 buffer_time=2.809 print_stall=0 extruder: target=240 temp=240.0 pwm=0.410
Stats 789954.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=673608 bytes_read=401807 bytes_retransmit=9 bytes_invalid=0 send_seq=20190 receive_seq=20190 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993057 heater_bed: target=80 temp=79.9 pwm=0.402 sd_pos=66397 sysload=0.18 cputime=58.616 memavail=7292400 print_time=1489.578 buffer_time=2.644 print_stall=0 extruder: target=240 temp=239.6 pwm=0.581
Stats 789955.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=674457 bytes_read=402200 bytes_retransmit=9 bytes_invalid=0 send_seq=20213 receive_seq=20213 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993073 heater_bed: target=80 temp=79.9 pwm=0.339 sd_pos=66452 sysload=0.18 cputime=58.674 memavail=7292400 print_time=1490.413 buffer_time=2.479 print_stall=0 extruder: target=240 temp=239.9 pwm=0.415
Stats 789956.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=675240 bytes_read=402608 bytes_retransmit=9 bytes_invalid=0 send_seq=20236 receive_seq=20236 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993063 heater_bed: target=80 temp=79.9 pwm=0.366 sd_pos=66506 sysload=0.18 cputime=58.727 memavail=7292400 print_time=1491.249 buffer_time=2.314 print_stall=0 extruder: target=240 temp=239.7 pwm=0.499
Stats 789957.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=676094 bytes_read=403050 bytes_retransmit=9 bytes_invalid=0 send_seq=20263 receive_seq=20263 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993057 heater_bed: target=80 temp=79.9 pwm=0.337 sd_pos=66561 sysload=0.25 cputime=58.797 memavail=7295444 print_time=1492.084 buffer_time=2.149 print_stall=0 extruder: target=240 temp=239.7 pwm=0.509
Stats 789958.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=677505 bytes_read=403488 bytes_retransmit=9 bytes_invalid=0 send_seq=20295 receive_seq=20295 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993053 heater_bed: target=80 temp=79.9 pwm=0.413 sd_pos=66676 sysload=0.25 cputime=58.851 memavail=7295384 print_time=1493.756 buffer_time=2.820 print_stall=0 extruder: target=240 temp=239.9 pwm=0.444
Stats 789959.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=678298 bytes_read=403891 bytes_retransmit=9 bytes_invalid=0 send_seq=20317 receive_seq=20317 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993047 heater_bed: target=80 temp=79.9 pwm=0.356 sd_pos=66745 sysload=0.25 cputime=58.909 memavail=7295384 print_time=1494.591 buffer_time=2.654 print_stall=0 extruder: target=240 temp=239.9 pwm=0.444
Stats 789960.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=679113 bytes_read=404298 bytes_retransmit=9 bytes_invalid=0 send_seq=20340 receive_seq=20340 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993102 heater_bed: target=80 temp=79.9 pwm=0.452 sd_pos=66801 sysload=0.25 cputime=58.972 memavail=7295384 print_time=1495.427 buffer_time=2.489 print_stall=0 extruder: target=240 temp=239.9 pwm=0.490
Stats 789961.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=679838 bytes_read=404681 bytes_retransmit=9 bytes_invalid=0 send_seq=20361 receive_seq=20361 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993093 heater_bed: target=80 temp=80.0 pwm=0.332 sd_pos=66872 sysload=0.25 cputime=59.027 memavail=7294628 print_time=1496.262 buffer_time=2.325 print_stall=0 extruder: target=240 temp=239.9 pwm=0.490
Stats 789962.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=680608 bytes_read=405099 bytes_retransmit=9 bytes_invalid=0 send_seq=20383 receive_seq=20383 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993086 heater_bed: target=80 temp=80.0 pwm=0.349 sd_pos=66927 sysload=0.23 cputime=59.082 memavail=7294628 print_time=1497.098 buffer_time=2.160 print_stall=0 extruder: target=240 temp=239.8 pwm=0.492
Stats 789963.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=681937 bytes_read=405551 bytes_retransmit=9 bytes_invalid=0 send_seq=20415 receive_seq=20415 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993080 heater_bed: target=80 temp=80.0 pwm=0.349 sd_pos=67038 sysload=0.23 cputime=59.149 memavail=7294628 print_time=1498.769 buffer_time=2.831 print_stall=0 extruder: target=240 temp=239.8 pwm=0.461
Stats 789964.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=682745 bytes_read=405934 bytes_retransmit=9 bytes_invalid=0 send_seq=20436 receive_seq=20436 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993074 heater_bed: target=80 temp=80.0 pwm=0.402 sd_pos=67094 sysload=0.23 cputime=59.211 memavail=7294628 print_time=1499.605 buffer_time=2.666 print_stall=0 extruder: target=240 temp=239.7 pwm=0.513
Stats 789965.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=683508 bytes_read=406337 bytes_retransmit=9 bytes_invalid=0 send_seq=20458 receive_seq=20458 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993065 heater_bed: target=80 temp=80.0 pwm=0.374 sd_pos=67150 sysload=0.23 cputime=59.268 memavail=7294628 print_time=1500.440 buffer_time=2.501 print_stall=0 extruder: target=240 temp=239.9 pwm=0.469
Stats 789966.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=684333 bytes_read=406749 bytes_retransmit=9 bytes_invalid=0 send_seq=20482 receive_seq=20482 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993057 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=67206 sysload=0.23 cputime=59.321 memavail=7294628 print_time=1501.276 buffer_time=2.336 print_stall=0 extruder: target=240 temp=239.8 pwm=0.493
Stats 789967.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=685649 bytes_read=407192 bytes_retransmit=9 bytes_invalid=0 send_seq=20512 receive_seq=20512 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993051 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=67316 sysload=0.21 cputime=59.377 memavail=7294628 print_time=1502.389 buffer_time=2.446 print_stall=0 extruder: target=240 temp=239.8 pwm=0.487
Stats 789968.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=686724 bytes_read=407620 bytes_retransmit=9 bytes_invalid=0 send_seq=20539 receive_seq=20539 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993047 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=67481 sysload=0.21 cputime=59.443 memavail=7294628 print_time=1502.978 buffer_time=2.035 print_stall=0 extruder: target=240 temp=239.7 pwm=0.495
Stats 789969.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=689244 bytes_read=408167 bytes_retransmit=9 bytes_invalid=0 send_seq=20590 receive_seq=20590 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993043 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=67710 sysload=0.21 cputime=59.520 memavail=7294628 print_time=1504.358 buffer_time=2.414 print_stall=0 extruder: target=240 temp=239.9 pwm=0.406
Stats 789970.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=691917 bytes_read=408707 bytes_retransmit=9 bytes_invalid=0 send_seq=20643 receive_seq=20643 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=20 freq=119993038 heater_bed: target=80 temp=80.0 pwm=0.315 sd_pos=68017 sysload=0.21 cputime=59.584 memavail=7294636 print_time=1505.393 buffer_time=2.449 print_stall=0 extruder: target=240 temp=239.9 pwm=0.460
Stats 789971.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=694631 bytes_read=409267 bytes_retransmit=9 bytes_invalid=0 send_seq=20698 receive_seq=20698 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=20 freq=119993030 heater_bed: target=80 temp=80.0 pwm=0.367 sd_pos=68762 sysload=0.21 cputime=59.653 memavail=7293628 print_time=1506.065 buffer_time=2.116 print_stall=0 extruder: target=240 temp=239.8 pwm=0.518
Stats 789972.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=699214 bytes_read=409994 bytes_retransmit=9 bytes_invalid=0 send_seq=20783 receive_seq=20783 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993021 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=70519 sysload=0.35 cputime=59.760 memavail=7293628 print_time=1507.169 buffer_time=2.215 print_stall=0 extruder: target=240 temp=240.0 pwm=0.490
Stats 789973.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=702806 bytes_read=410602 bytes_retransmit=9 bytes_invalid=0 send_seq=20849 receive_seq=20849 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993026 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=71187 sysload=0.35 cputime=59.846 memavail=7293404 print_time=1508.016 buffer_time=2.057 print_stall=0 extruder: target=240 temp=239.8 pwm=0.546
Stats 789974.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=707085 bytes_read=411309 bytes_retransmit=9 bytes_invalid=0 send_seq=20929 receive_seq=20929 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993019 heater_bed: target=80 temp=80.0 pwm=0.386 sd_pos=71694 sysload=0.35 cputime=59.930 memavail=7293404 print_time=1509.365 buffer_time=2.405 print_stall=0 extruder: target=240 temp=239.7 pwm=0.549
Stats 789975.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=709187 bytes_read=411797 bytes_retransmit=9 bytes_invalid=0 send_seq=20971 receive_seq=20971 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993020 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=71892 sysload=0.35 cputime=59.999 memavail=7293408 print_time=1510.244 buffer_time=2.280 print_stall=0 extruder: target=240 temp=240.0 pwm=0.429
Stats 789976.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=711242 bytes_read=412285 bytes_retransmit=9 bytes_invalid=0 send_seq=21013 receive_seq=21013 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993015 heater_bed: target=80 temp=80.0 pwm=0.309 sd_pos=72037 sysload=0.35 cputime=60.059 memavail=7292960 print_time=1511.155 buffer_time=2.191 print_stall=0 extruder: target=240 temp=240.2 pwm=0.412
Stats 789977.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=713339 bytes_read=412828 bytes_retransmit=9 bytes_invalid=0 send_seq=21057 receive_seq=21057 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993012 heater_bed: target=80 temp=80.0 pwm=0.268 sd_pos=72211 sysload=0.33 cputime=60.124 memavail=7290188 print_time=1512.110 buffer_time=2.143 print_stall=0 extruder: target=240 temp=240.4 pwm=0.338
Stats 789978.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=715405 bytes_read=413321 bytes_retransmit=9 bytes_invalid=0 send_seq=21100 receive_seq=21100 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993012 heater_bed: target=80 temp=80.0 pwm=0.329 sd_pos=72384 sysload=0.33 cputime=60.194 memavail=7293688 print_time=1513.064 buffer_time=2.097 print_stall=0 extruder: target=240 temp=240.1 pwm=0.525
Stats 789979.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=717981 bytes_read=413844 bytes_retransmit=9 bytes_invalid=0 send_seq=21149 receive_seq=21149 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993012 heater_bed: target=80 temp=80.1 pwm=0.273 sd_pos=72607 sysload=0.33 cputime=60.240 memavail=7293688 print_time=1514.202 buffer_time=2.234 print_stall=0 extruder: target=240 temp=240.0 pwm=0.525
Stats 789980.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=721761 bytes_read=414506 bytes_retransmit=9 bytes_invalid=0 send_seq=21220 receive_seq=21220 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993003 heater_bed: target=80 temp=80.0 pwm=0.375 sd_pos=72987 sysload=0.33 cputime=60.290 memavail=7293688 print_time=1515.387 buffer_time=2.418 print_stall=0 extruder: target=240 temp=240.0 pwm=0.519
Stats 789981.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=723976 bytes_read=415024 bytes_retransmit=9 bytes_invalid=0 send_seq=21268 receive_seq=21268 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992994 heater_bed: target=80 temp=80.1 pwm=0.308 sd_pos=73204 sysload=0.33 cputime=60.340 memavail=7292932 print_time=1515.987 buffer_time=2.017 print_stall=0 extruder: target=240 temp=240.1 pwm=0.449
Stats 789982.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=728617 bytes_read=415738 bytes_retransmit=9 bytes_invalid=0 send_seq=21352 receive_seq=21352 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992997 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=74929 sysload=0.30 cputime=60.401 memavail=7292932 print_time=1517.150 buffer_time=2.178 print_stall=0 extruder: target=240 temp=240.3 pwm=0.390
Stats 789983.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=733033 bytes_read=416450 bytes_retransmit=9 bytes_invalid=0 send_seq=21433 receive_seq=21433 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=883 freq=119992997 heater_bed: target=80 temp=80.0 pwm=0.364 sd_pos=76403 sysload=0.30 cputime=60.484 memavail=7292932 print_time=1518.552 buffer_time=2.579 print_stall=0 extruder: target=240 temp=240.2 pwm=0.430
Stats 789984.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=736254 bytes_read=417023 bytes_retransmit=9 bytes_invalid=0 send_seq=21492 receive_seq=21492 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992998 heater_bed: target=80 temp=80.1 pwm=0.364 sd_pos=77324 sysload=0.30 cputime=60.556 memavail=7292932 print_time=1519.099 buffer_time=2.126 print_stall=0 extruder: target=240 temp=240.2 pwm=0.412
Stats 789985.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=740890 bytes_read=417737 bytes_retransmit=9 bytes_invalid=0 send_seq=21577 receive_seq=21577 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992996 heater_bed: target=80 temp=80.1 pwm=0.364 sd_pos=79047 sysload=0.30 cputime=60.644 memavail=7292932 print_time=1520.325 buffer_time=2.352 print_stall=0 extruder: target=240 temp=240.0 pwm=0.525
Stats 789986.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=743098 bytes_read=418289 bytes_retransmit=9 bytes_invalid=0 send_seq=21626 receive_seq=21626 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993044 heater_bed: target=80 temp=80.1 pwm=0.299 sd_pos=79855 sysload=0.30 cputime=60.724 memavail=7292828 print_time=1520.889 buffer_time=1.915 print_stall=0 extruder: target=240 temp=240.2 pwm=0.395
Stats 789987.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=747487 bytes_read=418983 bytes_retransmit=9 bytes_invalid=0 send_seq=21706 receive_seq=21706 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993039 heater_bed: target=80 temp=80.1 pwm=0.405 sd_pos=81522 sysload=0.27 cputime=60.804 memavail=7292916 print_time=1521.990 buffer_time=2.015 print_stall=0 extruder: target=240 temp=240.1 pwm=0.448
Stats 789988.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=751755 bytes_read=419646 bytes_retransmit=9 bytes_invalid=0 send_seq=21783 receive_seq=21783 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993036 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=83104 sysload=0.27 cputime=60.877 memavail=7292916 print_time=1523.126 buffer_time=2.151 print_stall=0 extruder: target=240 temp=239.9 pwm=0.533
Stats 789989.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=755819 bytes_read=420328 bytes_retransmit=9 bytes_invalid=0 send_seq=21858 receive_seq=21858 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993031 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=84747 sysload=0.27 cputime=60.953 memavail=7292916 print_time=1524.183 buffer_time=2.208 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 789990.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=759301 bytes_read=420931 bytes_retransmit=9 bytes_invalid=0 send_seq=21923 receive_seq=21923 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993083 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=86029 sysload=0.27 cputime=61.036 memavail=7292916 print_time=1525.082 buffer_time=2.106 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 789991.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=763606 bytes_read=421599 bytes_retransmit=9 bytes_invalid=0 send_seq=22001 receive_seq=22001 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119993075 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=87541 sysload=0.27 cputime=61.117 memavail=7292936 print_time=1526.213 buffer_time=2.237 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 789992.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=766843 bytes_read=422227 bytes_retransmit=9 bytes_invalid=0 send_seq=22062 receive_seq=22062 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993068 heater_bed: target=80 temp=80.0 pwm=0.375 sd_pos=88764 sysload=0.33 cputime=61.207 memavail=7292936 print_time=1527.043 buffer_time=2.066 print_stall=0 extruder: target=240 temp=240.0 pwm=0.473
Stats 789993.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=770798 bytes_read=422865 bytes_retransmit=9 bytes_invalid=0 send_seq=22134 receive_seq=22134 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119993062 heater_bed: target=80 temp=80.0 pwm=0.318 sd_pos=90345 sysload=0.33 cputime=61.286 memavail=7292936 print_time=1528.109 buffer_time=2.131 print_stall=0 extruder: target=240 temp=239.7 pwm=0.528
Stats 789994.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=775257 bytes_read=423563 bytes_retransmit=9 bytes_invalid=0 send_seq=22215 receive_seq=22215 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119993051 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=91926 sysload=0.33 cputime=61.382 memavail=7292936 print_time=1529.305 buffer_time=2.326 print_stall=0 extruder: target=240 temp=239.7 pwm=0.566
Stats 789995.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=778372 bytes_read=424155 bytes_retransmit=9 bytes_invalid=0 send_seq=22275 receive_seq=22275 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119993045 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=93123 sysload=0.33 cputime=61.463 memavail=7292712 print_time=1530.135 buffer_time=2.156 print_stall=0 extruder: target=240 temp=239.9 pwm=0.439
Stats 789996.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=782207 bytes_read=424788 bytes_retransmit=9 bytes_invalid=0 send_seq=22346 receive_seq=22346 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119993040 heater_bed: target=80 temp=80.0 pwm=0.361 sd_pos=94649 sysload=0.33 cputime=61.554 memavail=7292712 print_time=1531.158 buffer_time=2.179 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 789997.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=785582 bytes_read=425412 bytes_retransmit=9 bytes_invalid=0 send_seq=22409 receive_seq=22409 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993034 heater_bed: target=80 temp=80.0 pwm=0.445 sd_pos=95842 sysload=0.31 cputime=61.634 memavail=7292712 print_time=1532.105 buffer_time=2.126 print_stall=0 extruder: target=240 temp=240.2 pwm=0.380
Stats 789998.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=789427 bytes_read=426064 bytes_retransmit=9 bytes_invalid=0 send_seq=22481 receive_seq=22481 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119993027 heater_bed: target=80 temp=79.9 pwm=0.508 sd_pos=97425 sysload=0.31 cputime=61.715 memavail=7292712 print_time=1533.162 buffer_time=2.183 print_stall=0 extruder: target=240 temp=239.9 pwm=0.524
Stats 789999.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=792654 bytes_read=426657 bytes_retransmit=9 bytes_invalid=0 send_seq=22544 receive_seq=22544 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993024 heater_bed: target=80 temp=79.9 pwm=0.579 sd_pos=98698 sysload=0.31 cputime=61.796 memavail=7292712 print_time=1534.061 buffer_time=2.080 print_stall=0 extruder: target=240 temp=239.9 pwm=0.529
Stats 790000.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=795974 bytes_read=427270 bytes_retransmit=9 bytes_invalid=0 send_seq=22608 receive_seq=22608 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119993020 heater_bed: target=80 temp=79.9 pwm=0.421 sd_pos=100001 sysload=0.31 cputime=61.891 memavail=7292712 print_time=1535.060 buffer_time=2.078 print_stall=0 extruder: target=240 temp=240.3 pwm=0.334
Stats 790001.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=799160 bytes_read=427872 bytes_retransmit=9 bytes_invalid=0 send_seq=22670 receive_seq=22670 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993012 heater_bed: target=80 temp=79.8 pwm=0.433 sd_pos=100467 sysload=0.31 cputime=61.962 memavail=7292208 print_time=1535.999 buffer_time=2.017 print_stall=0 extruder: target=240 temp=239.9 pwm=0.461
Stats 790002.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=802200 bytes_read=428461 bytes_retransmit=9 bytes_invalid=0 send_seq=22729 receive_seq=22729 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119993014 heater_bed: target=80 temp=79.8 pwm=0.517 sd_pos=101457 sysload=0.28 cputime=62.045 memavail=7292208 print_time=1537.156 buffer_time=2.172 print_stall=0 extruder: target=240 temp=240.1 pwm=0.375
Stats 790003.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=805613 bytes_read=429074 bytes_retransmit=9 bytes_invalid=0 send_seq=22793 receive_seq=22793 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993010 heater_bed: target=80 temp=79.8 pwm=0.516 sd_pos=102736 sysload=0.28 cputime=62.117 memavail=7292208 print_time=1538.003 buffer_time=2.019 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 790004.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=808982 bytes_read=429686 bytes_retransmit=9 bytes_invalid=0 send_seq=22857 receive_seq=22857 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993006 heater_bed: target=80 temp=79.8 pwm=0.447 sd_pos=103681 sysload=0.28 cputime=62.203 memavail=7292208 print_time=1539.072 buffer_time=2.086 print_stall=0 extruder: target=240 temp=240.1 pwm=0.410
Stats 790005.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=810169 bytes_read=430114 bytes_retransmit=9 bytes_invalid=0 send_seq=22887 receive_seq=22887 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993003 heater_bed: target=80 temp=79.8 pwm=0.447 sd_pos=103913 sysload=0.28 cputime=62.268 memavail=7292208 print_time=1540.737 buffer_time=2.750 print_stall=0 extruder: target=240 temp=240.2 pwm=0.361
Stats 790006.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=810637 bytes_read=430491 bytes_retransmit=9 bytes_invalid=0 send_seq=22905 receive_seq=22905 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993000 heater_bed: target=80 temp=79.7 pwm=0.613 sd_pos=103942 sysload=0.28 cputime=62.330 memavail=7292208 print_time=1542.260 buffer_time=3.273 print_stall=0 extruder: target=240 temp=240.2 pwm=0.380
Stats 790007.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=810826 bytes_read=430856 bytes_retransmit=9 bytes_invalid=0 send_seq=22918 receive_seq=22918 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993000 heater_bed: target=80 temp=79.7 pwm=0.554 sd_pos=103942 sysload=0.34 cputime=62.377 memavail=7292208 print_time=1542.260 buffer_time=2.273 print_stall=0 extruder: target=240 temp=240.2 pwm=0.388
Stats 790008.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=811100 bytes_read=431201 bytes_retransmit=9 bytes_invalid=0 send_seq=22932 receive_seq=22932 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993000 heater_bed: target=80 temp=79.7 pwm=0.461 sd_pos=103969 sysload=0.34 cputime=62.426 memavail=7292208 print_time=1543.188 buffer_time=2.200 print_stall=0 extruder: target=240 temp=240.1 pwm=0.482
Stats 790009.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=811946 bytes_read=431609 bytes_retransmit=9 bytes_invalid=0 send_seq=22955 receive_seq=22955 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992998 heater_bed: target=80 temp=79.7 pwm=0.472 sd_pos=103969 sysload=0.34 cputime=62.475 memavail=7292208 print_time=1544.218 buffer_time=2.229 print_stall=0 extruder: target=240 temp=240.1 pwm=0.491
Stats 790010.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=812599 bytes_read=432011 bytes_retransmit=9 bytes_invalid=0 send_seq=22977 receive_seq=22977 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992996 heater_bed: target=80 temp=79.7 pwm=0.493 sd_pos=104113 sysload=0.34 cputime=62.536 memavail=7292208 print_time=1546.389 buffer_time=3.399 print_stall=0 extruder: target=240 temp=239.8 pwm=0.530
Stats 790011.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=812786 bytes_read=432349 bytes_retransmit=9 bytes_invalid=0 send_seq=22989 receive_seq=22989 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992992 heater_bed: target=80 temp=79.7 pwm=0.549 sd_pos=104113 sysload=0.34 cputime=62.582 memavail=7291996 print_time=1546.389 buffer_time=2.398 print_stall=0 extruder: target=240 temp=239.6 pwm=0.600
Stats 790012.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=813593 bytes_read=432762 bytes_retransmit=9 bytes_invalid=0 send_seq=23010 receive_seq=23010 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992990 heater_bed: target=80 temp=79.7 pwm=0.499 sd_pos=104286 sysload=0.31 cputime=62.639 memavail=7291996 print_time=1547.096 buffer_time=2.104 print_stall=0 extruder: target=240 temp=239.6 pwm=0.535
Stats 790013.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=814427 bytes_read=433169 bytes_retransmit=9 bytes_invalid=0 send_seq=23033 receive_seq=23033 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992984 heater_bed: target=80 temp=79.7 pwm=0.440 sd_pos=104428 sysload=0.31 cputime=62.691 memavail=7291996 print_time=1548.806 buffer_time=2.813 print_stall=0 extruder: target=240 temp=239.8 pwm=0.487
Stats 790014.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=815595 bytes_read=433592 bytes_retransmit=9 bytes_invalid=0 send_seq=23062 receive_seq=23062 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992985 heater_bed: target=80 temp=79.7 pwm=0.504 sd_pos=104643 sysload=0.31 cputime=62.753 memavail=7291996 print_time=1550.472 buffer_time=3.479 print_stall=0 extruder: target=240 temp=239.8 pwm=0.517
Stats 790015.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=815802 bytes_read=433950 bytes_retransmit=9 bytes_invalid=0 send_seq=23075 receive_seq=23075 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992986 heater_bed: target=80 temp=79.7 pwm=0.419 sd_pos=104643 sysload=0.31 cputime=62.804 memavail=7291996 print_time=1550.472 buffer_time=2.478 print_stall=0 extruder: target=240 temp=239.8 pwm=0.494
Stats 790016.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=816242 bytes_read=434332 bytes_retransmit=9 bytes_invalid=0 send_seq=23093 receive_seq=23093 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992981 heater_bed: target=80 temp=79.7 pwm=0.554 sd_pos=104683 sysload=0.31 cputime=62.860 memavail=7291996 print_time=1551.995 buffer_time=3.000 print_stall=0 extruder: target=240 temp=239.6 pwm=0.592
Stats 790017.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=816415 bytes_read=434685 bytes_retransmit=9 bytes_invalid=0 send_seq=23105 receive_seq=23105 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993038 heater_bed: target=80 temp=79.7 pwm=0.491 sd_pos=104683 sysload=0.29 cputime=62.910 memavail=7291996 print_time=1551.995 buffer_time=1.999 print_stall=0 extruder: target=240 temp=239.7 pwm=0.474
Stats 790018.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=817068 bytes_read=435073 bytes_retransmit=9 bytes_invalid=0 send_seq=23124 receive_seq=23124 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993036 heater_bed: target=80 temp=79.7 pwm=0.435 sd_pos=104723 sysload=0.29 cputime=62.974 memavail=7291968 print_time=1553.545 buffer_time=2.549 print_stall=0 extruder: target=240 temp=239.8 pwm=0.443
Stats 790019.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=817663 bytes_read=435470 bytes_retransmit=9 bytes_invalid=0 send_seq=23145 receive_seq=23145 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993028 heater_bed: target=80 temp=79.7 pwm=0.424 sd_pos=104723 sysload=0.29 cputime=63.033 memavail=7291968 print_time=1554.006 buffer_time=2.009 print_stall=0 extruder: target=240 temp=239.8 pwm=0.405
Stats 790020.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=818311 bytes_read=435853 bytes_retransmit=9 bytes_invalid=0 send_seq=23166 receive_seq=23166 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993026 heater_bed: target=80 temp=79.7 pwm=0.447 sd_pos=104868 sysload=0.29 cputime=63.106 memavail=7291968 print_time=1556.198 buffer_time=3.200 print_stall=0 extruder: target=240 temp=239.9 pwm=0.420
Stats 790021.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=818516 bytes_read=436216 bytes_retransmit=9 bytes_invalid=0 send_seq=23180 receive_seq=23180 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993073 heater_bed: target=80 temp=79.7 pwm=0.404 sd_pos=104868 sysload=0.29 cputime=63.167 memavail=7291968 print_time=1556.198 buffer_time=2.199 print_stall=0 extruder: target=240 temp=239.8 pwm=0.528
Stats 790022.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=819472 bytes_read=436643 bytes_retransmit=9 bytes_invalid=0 send_seq=23204 receive_seq=23204 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119993067 heater_bed: target=80 temp=79.7 pwm=0.402 sd_pos=105040 sysload=0.42 cputime=63.233 memavail=7291968 print_time=1557.212 buffer_time=2.211 print_stall=0 extruder: target=240 temp=239.8 pwm=0.517
Stats 790023.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=821332 bytes_read=437116 bytes_retransmit=9 bytes_invalid=0 send_seq=23243 receive_seq=23243 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993061 heater_bed: target=80 temp=79.8 pwm=0.389 sd_pos=105290 sysload=0.42 cputime=63.304 memavail=7291968 print_time=1558.996 buffer_time=2.995 print_stall=0 extruder: target=240 temp=239.6 pwm=0.619
Stats 790024.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=822234 bytes_read=437474 bytes_retransmit=9 bytes_invalid=0 send_seq=23268 receive_seq=23256 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=583 upcoming_bytes=0 freq=119993053 heater_bed: target=80 temp=79.7 pwm=0.450 sd_pos=105400 sysload=0.42 cputime=63.369 memavail=7291968 print_time=1559.444 buffer_time=2.436 print_stall=0 extruder: target=240 temp=239.6 pwm=0.540
Stats 790025.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=824482 bytes_read=438056 bytes_retransmit=9 bytes_invalid=0 send_seq=23314 receive_seq=23314 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993047 heater_bed: target=80 temp=79.8 pwm=0.450 sd_pos=105727 sysload=0.42 cputime=63.428 memavail=7291968 print_time=1560.062 buffer_time=2.055 print_stall=0 extruder: target=240 temp=239.7 pwm=0.553
Stats 790026.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=829239 bytes_read=438769 bytes_retransmit=9 bytes_invalid=0 send_seq=23401 receive_seq=23401 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119993041 heater_bed: target=80 temp=79.8 pwm=0.450 sd_pos=107368 sysload=0.42 cputime=63.523 memavail=7291968 print_time=1561.379 buffer_time=2.370 print_stall=0 extruder: target=240 temp=239.6 pwm=0.576
Stats 790027.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=831839 bytes_read=439328 bytes_retransmit=9 bytes_invalid=0 send_seq=23451 receive_seq=23451 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993035 heater_bed: target=80 temp=79.8 pwm=0.525 sd_pos=108118 sysload=0.39 cputime=63.589 memavail=7291968 print_time=1562.011 buffer_time=2.002 print_stall=0 extruder: target=240 temp=239.7 pwm=0.582
Stats 790028.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=836491 bytes_read=440050 bytes_retransmit=9 bytes_invalid=0 send_seq=23537 receive_seq=23537 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993030 heater_bed: target=80 temp=79.8 pwm=0.466 sd_pos=108800 sysload=0.39 cputime=63.668 memavail=7291968 print_time=1563.490 buffer_time=2.481 print_stall=0 extruder: target=240 temp=240.0 pwm=0.504
Stats 790029.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=837975 bytes_read=440488 bytes_retransmit=9 bytes_invalid=0 send_seq=23569 receive_seq=23569 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993025 heater_bed: target=80 temp=79.8 pwm=0.466 sd_pos=108914 sysload=0.39 cputime=63.729 memavail=7291968 print_time=1564.129 buffer_time=2.119 print_stall=0 extruder: target=240 temp=240.1 pwm=0.451
Stats 790030.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=840034 bytes_read=440986 bytes_retransmit=9 bytes_invalid=0 send_seq=23610 receive_seq=23610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119993059 heater_bed: target=80 temp=79.8 pwm=0.400 sd_pos=109119 sysload=0.39 cputime=63.802 memavail=7291968 print_time=1565.306 buffer_time=2.296 print_stall=0 extruder: target=240 temp=240.1 pwm=0.500
Stats 790031.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=841629 bytes_read=441468 bytes_retransmit=9 bytes_invalid=0 send_seq=23648 receive_seq=23648 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993052 heater_bed: target=80 temp=79.8 pwm=0.459 sd_pos=109266 sysload=0.39 cputime=63.871 memavail=7292252 print_time=1566.163 buffer_time=2.152 print_stall=0 extruder: target=240 temp=240.0 pwm=0.538
Stats 790032.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=843089 bytes_read=441927 bytes_retransmit=9 bytes_invalid=0 send_seq=23681 receive_seq=23681 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993042 heater_bed: target=80 temp=79.8 pwm=0.459 sd_pos=109383 sysload=0.36 cputime=63.931 memavail=7292252 print_time=1567.036 buffer_time=2.024 print_stall=0 extruder: target=240 temp=239.9 pwm=0.523
Stats 790033.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=845195 bytes_read=442435 bytes_retransmit=9 bytes_invalid=0 send_seq=23724 receive_seq=23724 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993033 heater_bed: target=80 temp=79.8 pwm=0.443 sd_pos=109556 sysload=0.36 cputime=63.992 memavail=7292252 print_time=1568.345 buffer_time=2.332 print_stall=0 extruder: target=240 temp=239.8 pwm=0.562
Stats 790034.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=846661 bytes_read=442892 bytes_retransmit=9 bytes_invalid=0 send_seq=23757 receive_seq=23757 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993026 heater_bed: target=80 temp=79.8 pwm=0.443 sd_pos=109671 sysload=0.36 cputime=64.052 memavail=7292252 print_time=1569.217 buffer_time=2.204 print_stall=0 extruder: target=240 temp=240.0 pwm=0.501
Stats 790035.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=848395 bytes_read=443365 bytes_retransmit=9 bytes_invalid=0 send_seq=23796 receive_seq=23796 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993019 heater_bed: target=80 temp=79.8 pwm=0.505 sd_pos=109873 sysload=0.36 cputime=64.111 memavail=7292252 print_time=1570.156 buffer_time=2.141 print_stall=0 extruder: target=240 temp=240.1 pwm=0.508
Stats 790036.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=850002 bytes_read=443838 bytes_retransmit=9 bytes_invalid=0 send_seq=23832 receive_seq=23832 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993016 heater_bed: target=80 temp=79.8 pwm=0.476 sd_pos=109989 sysload=0.36 cputime=64.168 memavail=7292028 print_time=1571.119 buffer_time=2.104 print_stall=0 extruder: target=240 temp=240.0 pwm=0.508
Stats 790037.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=851564 bytes_read=444330 bytes_retransmit=9 bytes_invalid=0 send_seq=23869 receive_seq=23869 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993020 heater_bed: target=80 temp=79.8 pwm=0.481 sd_pos=110102 sysload=0.33 cputime=64.228 memavail=7292028 print_time=1572.091 buffer_time=2.075 print_stall=0 extruder: target=240 temp=239.8 pwm=0.609
Stats 790038.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=853001 bytes_read=444768 bytes_retransmit=9 bytes_invalid=0 send_seq=23901 receive_seq=23901 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993020 heater_bed: target=80 temp=79.9 pwm=0.320 sd_pos=110218 sysload=0.33 cputime=64.287 memavail=7292028 print_time=1573.063 buffer_time=2.047 print_stall=0 extruder: target=240 temp=239.8 pwm=0.663
Stats 790039.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=854460 bytes_read=445231 bytes_retransmit=9 bytes_invalid=0 send_seq=23935 receive_seq=23935 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993057 heater_bed: target=80 temp=79.9 pwm=0.384 sd_pos=110333 sysload=0.33 cputime=64.343 memavail=7291804 print_time=1574.036 buffer_time=2.019 print_stall=0 extruder: target=240 temp=240.0 pwm=0.481
Stats 790040.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=856548 bytes_read=445743 bytes_retransmit=9 bytes_invalid=0 send_seq=23979 receive_seq=23979 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993052 heater_bed: target=80 temp=79.9 pwm=0.436 sd_pos=110505 sysload=0.33 cputime=64.412 memavail=7291804 print_time=1575.494 buffer_time=2.477 print_stall=0 extruder: target=240 temp=240.0 pwm=0.517
Stats 790041.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=857981 bytes_read=446181 bytes_retransmit=9 bytes_invalid=0 send_seq=24011 receive_seq=24011 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993048 heater_bed: target=80 temp=79.9 pwm=0.362 sd_pos=110620 sysload=0.33 cputime=64.470 memavail=7291700 print_time=1576.466 buffer_time=2.448 print_stall=0 extruder: target=240 temp=239.8 pwm=0.615
Stats 790042.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=859421 bytes_read=446642 bytes_retransmit=9 bytes_invalid=0 send_seq=24043 receive_seq=24043 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993046 heater_bed: target=80 temp=79.9 pwm=0.423 sd_pos=110734 sysload=0.30 cputime=64.522 memavail=7291812 print_time=1577.438 buffer_time=2.419 print_stall=0 extruder: target=240 temp=239.9 pwm=0.518
Stats 790043.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=860840 bytes_read=447091 bytes_retransmit=9 bytes_invalid=0 send_seq=24076 receive_seq=24076 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993043 heater_bed: target=80 temp=79.9 pwm=0.406 sd_pos=110850 sysload=0.30 cputime=64.580 memavail=7291812 print_time=1578.410 buffer_time=2.391 print_stall=0 extruder: target=240 temp=240.1 pwm=0.518
Stats 790044.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=862260 bytes_read=447522 bytes_retransmit=9 bytes_invalid=0 send_seq=24107 receive_seq=24107 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993049 heater_bed: target=80 temp=80.0 pwm=0.348 sd_pos=110963 sysload=0.30 cputime=64.637 memavail=7291812 print_time=1579.382 buffer_time=2.363 print_stall=0 extruder: target=240 temp=239.9 pwm=0.573
Stats 790045.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=864041 bytes_read=447995 bytes_retransmit=9 bytes_invalid=0 send_seq=24144 receive_seq=24143 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993047 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=111161 sysload=0.30 cputime=64.691 memavail=7291812 print_time=1580.431 buffer_time=2.412 print_stall=0 extruder: target=240 temp=239.9 pwm=0.533
Stats 790046.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=865474 bytes_read=448458 bytes_retransmit=9 bytes_invalid=0 send_seq=24175 receive_seq=24175 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993041 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=111274 sysload=0.30 cputime=64.749 memavail=7291772 print_time=1581.277 buffer_time=2.257 print_stall=0 extruder: target=240 temp=240.0 pwm=0.533
Stats 790047.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=867055 bytes_read=448926 bytes_retransmit=9 bytes_invalid=0 send_seq=24210 receive_seq=24210 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993103 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=111484 sysload=0.28 cputime=64.809 memavail=7291772 print_time=1582.216 buffer_time=2.196 print_stall=0 extruder: target=240 temp=240.1 pwm=0.475
Stats 790048.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=868614 bytes_read=449389 bytes_retransmit=9 bytes_invalid=0 send_seq=24244 receive_seq=24244 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993095 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=111610 sysload=0.28 cputime=64.870 memavail=7291772 print_time=1583.182 buffer_time=2.161 print_stall=0 extruder: target=240 temp=240.0 pwm=0.542
Stats 790049.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=870010 bytes_read=449841 bytes_retransmit=9 bytes_invalid=0 send_seq=24276 receive_seq=24276 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993096 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=111722 sysload=0.28 cputime=64.931 memavail=7291772 print_time=1584.154 buffer_time=2.132 print_stall=0 extruder: target=240 temp=240.1 pwm=0.487
Stats 790050.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=871363 bytes_read=450269 bytes_retransmit=9 bytes_invalid=0 send_seq=24306 receive_seq=24306 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993087 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=111835 sysload=0.28 cputime=64.988 memavail=7291772 print_time=1585.126 buffer_time=2.104 print_stall=0 extruder: target=240 temp=239.9 pwm=0.582
Stats 790051.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=872748 bytes_read=450717 bytes_retransmit=9 bytes_invalid=0 send_seq=24337 receive_seq=24337 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993080 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=111949 sysload=0.28 cputime=65.044 memavail=7292784 print_time=1586.098 buffer_time=2.076 print_stall=0 extruder: target=240 temp=239.8 pwm=0.598
Stats 790052.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=874070 bytes_read=451179 bytes_retransmit=9 bytes_invalid=0 send_seq=24368 receive_seq=24368 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993072 heater_bed: target=80 temp=80.0 pwm=0.335 sd_pos=112061 sysload=0.26 cputime=65.104 memavail=7292784 print_time=1587.071 buffer_time=2.047 print_stall=0 extruder: target=240 temp=240.0 pwm=0.524
Stats 790053.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=876180 bytes_read=451672 bytes_retransmit=9 bytes_invalid=0 send_seq=24411 receive_seq=24411 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993064 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=112302 sysload=0.26 cputime=65.170 memavail=7292784 print_time=1588.024 buffer_time=1.999 print_stall=0 extruder: target=240 temp=239.8 pwm=0.592
Stats 790054.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=879599 bytes_read=452295 bytes_retransmit=9 bytes_invalid=0 send_seq=24477 receive_seq=24477 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993067 heater_bed: target=80 temp=80.0 pwm=0.385 sd_pos=112861 sysload=0.26 cputime=65.241 memavail=7292784 print_time=1589.250 buffer_time=2.225 print_stall=0 extruder: target=240 temp=240.1 pwm=0.471
Stats 790055.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=882763 bytes_read=452892 bytes_retransmit=9 bytes_invalid=0 send_seq=24538 receive_seq=24538 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993059 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=114044 sysload=0.26 cputime=65.321 memavail=7292784 print_time=1590.087 buffer_time=2.063 print_stall=0 extruder: target=240 temp=240.1 pwm=0.543
Stats 790056.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=887703 bytes_read=453615 bytes_retransmit=9 bytes_invalid=0 send_seq=24627 receive_seq=24627 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119993115 heater_bed: target=80 temp=80.1 pwm=0.407 sd_pos=115287 sysload=0.26 cputime=65.408 memavail=7292784 print_time=1591.521 buffer_time=2.496 print_stall=0 extruder: target=240 temp=239.9 pwm=0.543
Stats 790057.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=890156 bytes_read=454164 bytes_retransmit=9 bytes_invalid=0 send_seq=24675 receive_seq=24675 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119993103 heater_bed: target=80 temp=80.1 pwm=0.407 sd_pos=116411 sysload=0.24 cputime=65.485 memavail=7295192 print_time=1592.227 buffer_time=2.199 print_stall=0 extruder: target=240 temp=239.9 pwm=0.543
Stats 790058.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=893420 bytes_read=454771 bytes_retransmit=9 bytes_invalid=0 send_seq=24738 receive_seq=24738 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119993089 heater_bed: target=80 temp=80.1 pwm=0.374 sd_pos=117536 sysload=0.24 cputime=65.555 memavail=7294460 print_time=1593.110 buffer_time=2.081 print_stall=0 extruder: target=240 temp=239.8 pwm=0.578
Stats 790059.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=897553 bytes_read=455429 bytes_retransmit=9 bytes_invalid=0 send_seq=24814 receive_seq=24814 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119993076 heater_bed: target=80 temp=80.1 pwm=0.374 sd_pos=119064 sysload=0.24 cputime=65.652 memavail=7293116 print_time=1594.283 buffer_time=2.253 print_stall=0 extruder: target=240 temp=240.0 pwm=0.511
Stats 790060.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=900536 bytes_read=456007 bytes_retransmit=9 bytes_invalid=0 send_seq=24871 receive_seq=24871 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119993074 heater_bed: target=80 temp=80.1 pwm=0.436 sd_pos=120190 sysload=0.24 cputime=65.711 memavail=7294488 print_time=1595.121 buffer_time=2.091 print_stall=0 extruder: target=240 temp=239.8 pwm=0.599
Stats 790061.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=903816 bytes_read=456614 bytes_retransmit=9 bytes_invalid=0 send_seq=24934 receive_seq=24934 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993151 heater_bed: target=80 temp=80.1 pwm=0.370 sd_pos=121429 sysload=0.24 cputime=65.785 memavail=7294900 print_time=1596.040 buffer_time=2.008 print_stall=0 extruder: target=240 temp=240.1 pwm=0.564
Stats 790062.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=908063 bytes_read=457298 bytes_retransmit=9 bytes_invalid=0 send_seq=25012 receive_seq=25012 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119993135 heater_bed: target=80 temp=80.1 pwm=0.363 sd_pos=122986 sysload=0.22 cputime=65.852 memavail=7294900 print_time=1597.272 buffer_time=2.240 print_stall=0 extruder: target=240 temp=239.9 pwm=0.595
Stats 790063.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=911077 bytes_read=457886 bytes_retransmit=9 bytes_invalid=0 send_seq=25071 receive_seq=25071 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993121 heater_bed: target=80 temp=80.1 pwm=0.317 sd_pos=124112 sysload=0.22 cputime=65.933 memavail=7294900 print_time=1598.110 buffer_time=2.078 print_stall=0 extruder: target=240 temp=240.1 pwm=0.475
Stats 790064.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=915021 bytes_read=458493 bytes_retransmit=9 bytes_invalid=0 send_seq=25146 receive_seq=25134 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=268 upcoming_bytes=0 freq=119993107 heater_bed: target=80 temp=80.1 pwm=0.323 sd_pos=125647 sysload=0.22 cputime=66.026 memavail=7294900 print_time=1599.343 buffer_time=2.306 print_stall=0 extruder: target=240 temp=240.1 pwm=0.532
Stats 790065.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=918538 bytes_read=459151 bytes_retransmit=9 bytes_invalid=0 send_seq=25210 receive_seq=25210 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119993100 heater_bed: target=80 temp=80.1 pwm=0.323 sd_pos=126855 sysload=0.22 cputime=66.101 memavail=7294900 print_time=1600.261 buffer_time=2.224 print_stall=0 extruder: target=240 temp=240.1 pwm=0.509
Stats 790066.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=921552 bytes_read=459734 bytes_retransmit=9 bytes_invalid=0 send_seq=25268 receive_seq=25268 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993089 heater_bed: target=80 temp=80.1 pwm=0.406 sd_pos=127942 sysload=0.22 cputime=66.179 memavail=7294900 print_time=1601.100 buffer_time=2.062 print_stall=0 extruder: target=240 temp=239.7 pwm=0.608
Stats 790067.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=925748 bytes_read=460427 bytes_retransmit=9 bytes_invalid=0 send_seq=25345 receive_seq=25345 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119993077 heater_bed: target=80 temp=80.1 pwm=0.320 sd_pos=129445 sysload=0.28 cputime=66.258 memavail=7294900 print_time=1602.332 buffer_time=2.294 print_stall=0 extruder: target=240 temp=239.8 pwm=0.550
Stats 790068.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=928962 bytes_read=461000 bytes_retransmit=9 bytes_invalid=0 send_seq=25404 receive_seq=25404 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119993076 heater_bed: target=80 temp=80.1 pwm=0.320 sd_pos=130641 sysload=0.28 cputime=66.330 memavail=7294900 print_time=1603.250 buffer_time=2.211 print_stall=0 extruder: target=240 temp=239.8 pwm=0.550
Stats 790069.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=931846 bytes_read=461578 bytes_retransmit=9 bytes_invalid=0 send_seq=25461 receive_seq=25461 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119993119 heater_bed: target=80 temp=80.1 pwm=0.485 sd_pos=131728 sysload=0.28 cputime=66.419 memavail=7294900 print_time=1604.089 buffer_time=2.049 print_stall=0 extruder: target=240 temp=240.0 pwm=0.496
Stats 790070.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=936034 bytes_read=462265 bytes_retransmit=9 bytes_invalid=0 send_seq=25540 receive_seq=25540 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119993102 heater_bed: target=80 temp=80.1 pwm=0.480 sd_pos=133231 sysload=0.28 cputime=66.497 memavail=7294900 print_time=1605.321 buffer_time=2.280 print_stall=0 extruder: target=240 temp=239.8 pwm=0.609
Stats 790071.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=939204 bytes_read=462843 bytes_retransmit=9 bytes_invalid=0 send_seq=25600 receive_seq=25600 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119993096 heater_bed: target=80 temp=80.1 pwm=0.469 sd_pos=134427 sysload=0.28 cputime=66.579 memavail=7294148 print_time=1606.239 buffer_time=2.198 print_stall=0 extruder: target=240 temp=240.1 pwm=0.466
Stats 790072.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=942067 bytes_read=463432 bytes_retransmit=9 bytes_invalid=0 send_seq=25656 receive_seq=25656 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993086 heater_bed: target=80 temp=80.0 pwm=0.580 sd_pos=135514 sysload=0.26 cputime=66.661 memavail=7294148 print_time=1607.078 buffer_time=2.035 print_stall=0 extruder: target=240 temp=239.9 pwm=0.571
Stats 790073.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=945952 bytes_read=464084 bytes_retransmit=9 bytes_invalid=0 send_seq=25728 receive_seq=25728 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119993077 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=137017 sysload=0.26 cputime=66.755 memavail=7294148 print_time=1608.310 buffer_time=2.266 print_stall=0 extruder: target=240 temp=240.1 pwm=0.436
Stats 790074.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=948866 bytes_read=464637 bytes_retransmit=9 bytes_invalid=0 send_seq=25783 receive_seq=25783 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993116 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=138214 sysload=0.26 cputime=66.850 memavail=7294148 print_time=1609.228 buffer_time=2.180 print_stall=0 extruder: target=240 temp=239.9 pwm=0.523
Stats 790075.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=951544 bytes_read=465190 bytes_retransmit=9 bytes_invalid=0 send_seq=25835 receive_seq=25835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993103 heater_bed: target=80 temp=79.9 pwm=0.545 sd_pos=139167 sysload=0.26 cputime=66.928 memavail=7294148 print_time=1610.098 buffer_time=2.050 print_stall=0 extruder: target=240 temp=240.2 pwm=0.432
Stats 790076.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=954051 bytes_read=465727 bytes_retransmit=9 bytes_invalid=0 send_seq=25884 receive_seq=25884 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993098 heater_bed: target=80 temp=79.9 pwm=0.622 sd_pos=139955 sysload=0.26 cputime=67.010 memavail=7294148 print_time=1611.344 buffer_time=2.295 print_stall=0 extruder: target=240 temp=240.2 pwm=0.498
Stats 790077.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=954844 bytes_read=466129 bytes_retransmit=9 bytes_invalid=0 send_seq=25906 receive_seq=25906 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993097 heater_bed: target=80 temp=79.9 pwm=0.526 sd_pos=140012 sysload=0.32 cputime=67.086 memavail=7294376 print_time=1612.273 buffer_time=2.222 print_stall=0 extruder: target=240 temp=240.1 pwm=0.498
Stats 790078.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=956198 bytes_read=466574 bytes_retransmit=9 bytes_invalid=0 send_seq=25938 receive_seq=25938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993087 heater_bed: target=80 temp=79.8 pwm=0.592 sd_pos=140244 sysload=0.32 cputime=67.156 memavail=7294376 print_time=1613.971 buffer_time=2.916 print_stall=0 extruder: target=240 temp=239.7 pwm=0.693
Stats 790079.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=956636 bytes_read=466948 bytes_retransmit=9 bytes_invalid=0 send_seq=25956 receive_seq=25956 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993080 heater_bed: target=80 temp=79.8 pwm=0.449 sd_pos=140273 sysload=0.32 cputime=67.216 memavail=7294384 print_time=1615.495 buffer_time=3.439 print_stall=0 extruder: target=240 temp=240.0 pwm=0.460
Stats 790080.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=956871 bytes_read=467286 bytes_retransmit=9 bytes_invalid=0 send_seq=25968 receive_seq=25968 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993068 heater_bed: target=80 temp=79.8 pwm=0.534 sd_pos=140273 sysload=0.32 cputime=67.272 memavail=7294384 print_time=1615.495 buffer_time=2.438 print_stall=0 extruder: target=240 temp=239.9 pwm=0.545
Stats 790081.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=957161 bytes_read=467668 bytes_retransmit=9 bytes_invalid=0 send_seq=25983 receive_seq=25983 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993056 heater_bed: target=80 temp=79.8 pwm=0.551 sd_pos=140300 sysload=0.32 cputime=67.327 memavail=7294132 print_time=1616.423 buffer_time=2.365 print_stall=0 extruder: target=240 temp=240.4 pwm=0.437
Stats 790082.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=958037 bytes_read=468091 bytes_retransmit=9 bytes_invalid=0 send_seq=26009 receive_seq=26009 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993049 heater_bed: target=80 temp=79.8 pwm=0.479 sd_pos=140300 sysload=0.29 cputime=67.388 memavail=7294132 print_time=1617.453 buffer_time=2.395 print_stall=0 extruder: target=240 temp=240.2 pwm=0.531
Stats 790083.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=958666 bytes_read=468469 bytes_retransmit=9 bytes_invalid=0 send_seq=26029 receive_seq=26029 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119993042 heater_bed: target=80 temp=79.8 pwm=0.475 sd_pos=140444 sysload=0.29 cputime=67.456 memavail=7294132 print_time=1619.624 buffer_time=3.565 print_stall=0 extruder: target=240 temp=239.9 pwm=0.619
Stats 790084.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=958858 bytes_read=468841 bytes_retransmit=9 bytes_invalid=0 send_seq=26042 receive_seq=26042 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993031 heater_bed: target=80 temp=79.7 pwm=0.617 sd_pos=140444 sysload=0.29 cputime=67.517 memavail=7294132 print_time=1619.624 buffer_time=2.564 print_stall=0 extruder: target=240 temp=240.0 pwm=0.563
Stats 790085.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=959664 bytes_read=469234 bytes_retransmit=9 bytes_invalid=0 send_seq=26065 receive_seq=26065 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119993023 heater_bed: target=80 temp=79.7 pwm=0.491 sd_pos=140617 sysload=0.29 cputime=67.574 memavail=7294132 print_time=1620.331 buffer_time=2.271 print_stall=0 extruder: target=240 temp=239.9 pwm=0.545
Stats 790086.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=960121 bytes_read=469592 bytes_retransmit=9 bytes_invalid=0 send_seq=26081 receive_seq=26081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993015 heater_bed: target=80 temp=79.7 pwm=0.552 sd_pos=140674 sysload=0.29 cputime=67.634 memavail=7294132 print_time=1621.479 buffer_time=2.418 print_stall=0 extruder: target=240 temp=239.7 pwm=0.644
Stats 790087.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=961383 bytes_read=470064 bytes_retransmit=9 bytes_invalid=0 send_seq=26111 receive_seq=26111 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993007 heater_bed: target=80 temp=79.7 pwm=0.552 sd_pos=140875 sysload=0.27 cputime=67.698 memavail=7294132 print_time=1622.503 buffer_time=2.442 print_stall=0 extruder: target=240 temp=240.1 pwm=0.504
Stats 790088.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=962644 bytes_read=470487 bytes_retransmit=9 bytes_invalid=0 send_seq=26140 receive_seq=26140 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993054 heater_bed: target=80 temp=79.7 pwm=0.552 sd_pos=141135 sysload=0.27 cputime=67.757 memavail=7294132 print_time=1623.660 buffer_time=2.598 print_stall=0 extruder: target=240 temp=240.1 pwm=0.504
Stats 790089.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=964083 bytes_read=470930 bytes_retransmit=9 bytes_invalid=0 send_seq=26173 receive_seq=26173 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993045 heater_bed: target=80 temp=79.7 pwm=0.451 sd_pos=141338 sysload=0.27 cputime=67.812 memavail=7294132 print_time=1625.400 buffer_time=3.338 print_stall=0 extruder: target=240 temp=240.2 pwm=0.440
Stats 790090.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=964261 bytes_read=471302 bytes_retransmit=9 bytes_invalid=0 send_seq=26186 receive_seq=26186 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993035 heater_bed: target=80 temp=79.7 pwm=0.560 sd_pos=141338 sysload=0.27 cputime=67.860 memavail=7294132 print_time=1625.400 buffer_time=2.336 print_stall=0 extruder: target=240 temp=239.8 pwm=0.632
Stats 790091.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=964740 bytes_read=471675 bytes_retransmit=9 bytes_invalid=0 send_seq=26205 receive_seq=26205 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993029 heater_bed: target=80 temp=79.7 pwm=0.524 sd_pos=141366 sysload=0.27 cputime=67.916 memavail=7294140 print_time=1626.923 buffer_time=2.858 print_stall=0 extruder: target=240 temp=239.9 pwm=0.566
Stats 790092.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=965006 bytes_read=472043 bytes_retransmit=9 bytes_invalid=0 send_seq=26220 receive_seq=26220 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993020 heater_bed: target=80 temp=79.8 pwm=0.370 sd_pos=141394 sysload=0.33 cputime=67.968 memavail=7294140 print_time=1627.868 buffer_time=2.803 print_stall=0 extruder: target=240 temp=239.7 pwm=0.634
Stats 790093.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=965658 bytes_read=472465 bytes_retransmit=9 bytes_invalid=0 send_seq=26243 receive_seq=26243 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119993010 heater_bed: target=80 temp=79.8 pwm=0.429 sd_pos=141394 sysload=0.33 cputime=68.020 memavail=7294140 print_time=1628.473 buffer_time=2.407 print_stall=0 extruder: target=240 temp=240.0 pwm=0.556
Stats 790094.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=966289 bytes_read=472843 bytes_retransmit=9 bytes_invalid=0 send_seq=26263 receive_seq=26263 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992998 heater_bed: target=80 temp=79.8 pwm=0.429 sd_pos=141394 sysload=0.33 cputime=68.064 memavail=7294140 print_time=1629.379 buffer_time=2.313 print_stall=0 extruder: target=240 temp=240.1 pwm=0.479
Stats 790095.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=966860 bytes_read=473216 bytes_retransmit=9 bytes_invalid=0 send_seq=26282 receive_seq=26282 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992988 heater_bed: target=80 temp=79.8 pwm=0.391 sd_pos=141539 sysload=0.33 cputime=68.111 memavail=7294140 print_time=1631.126 buffer_time=3.059 print_stall=0 extruder: target=240 temp=239.9 pwm=0.610
Stats 790096.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=967054 bytes_read=473593 bytes_retransmit=9 bytes_invalid=0 send_seq=26296 receive_seq=26296 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992982 heater_bed: target=80 temp=79.8 pwm=0.483 sd_pos=141539 sysload=0.33 cputime=68.149 memavail=7294140 print_time=1631.126 buffer_time=2.059 print_stall=0 extruder: target=240 temp=239.8 pwm=0.557
Stats 790097.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=968027 bytes_read=474011 bytes_retransmit=9 bytes_invalid=0 send_seq=26321 receive_seq=26321 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993027 heater_bed: target=80 temp=79.8 pwm=0.478 sd_pos=141711 sysload=0.30 cputime=68.209 memavail=7294140 print_time=1632.140 buffer_time=2.071 print_stall=0 extruder: target=240 temp=240.0 pwm=0.503
Stats 790098.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=968711 bytes_read=474389 bytes_retransmit=9 bytes_invalid=0 send_seq=26341 receive_seq=26341 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119993020 heater_bed: target=80 temp=79.8 pwm=0.478 sd_pos=141768 sysload=0.30 cputime=68.262 memavail=7293072 print_time=1633.134 buffer_time=2.064 print_stall=0 extruder: target=240 temp=239.9 pwm=0.560
Stats 790099.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=969729 bytes_read=474836 bytes_retransmit=9 bytes_invalid=0 send_seq=26369 receive_seq=26369 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993007 heater_bed: target=80 temp=79.8 pwm=0.423 sd_pos=141884 sysload=0.30 cputime=68.321 memavail=7293072 print_time=1634.080 buffer_time=2.010 print_stall=0 extruder: target=240 temp=239.8 pwm=0.551
Stats 790100.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=974123 bytes_read=475509 bytes_retransmit=9 bytes_invalid=0 send_seq=26448 receive_seq=26448 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119993002 heater_bed: target=80 temp=79.8 pwm=0.502 sd_pos=143005 sysload=0.30 cputime=68.377 memavail=7292852 print_time=1635.278 buffer_time=2.207 print_stall=0 extruder: target=240 temp=239.9 pwm=0.551
Stats 790101.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=978795 bytes_read=476207 bytes_retransmit=9 bytes_invalid=0 send_seq=26532 receive_seq=26532 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=354 freq=119993003 heater_bed: target=80 temp=79.8 pwm=0.386 sd_pos=144504 sysload=0.30 cputime=68.457 memavail=7292628 print_time=1636.611 buffer_time=2.540 print_stall=0 extruder: target=240 temp=240.0 pwm=0.496
Stats 790102.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=981734 bytes_read=476810 bytes_retransmit=9 bytes_invalid=0 send_seq=26588 receive_seq=26588 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993074 heater_bed: target=80 temp=79.8 pwm=0.481 sd_pos=144752 sysload=0.28 cputime=68.526 memavail=7292628 print_time=1637.183 buffer_time=2.112 print_stall=0 extruder: target=240 temp=240.4 pwm=0.373
Stats 790103.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=986233 bytes_read=477488 bytes_retransmit=9 bytes_invalid=0 send_seq=26668 receive_seq=26668 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993060 heater_bed: target=80 temp=79.9 pwm=0.423 sd_pos=145318 sysload=0.28 cputime=68.588 memavail=7292628 print_time=1638.187 buffer_time=2.115 print_stall=0 extruder: target=240 temp=240.1 pwm=0.506
Stats 790104.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=990418 bytes_read=478126 bytes_retransmit=9 bytes_invalid=0 send_seq=26740 receive_seq=26740 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119993052 heater_bed: target=80 temp=79.8 pwm=0.511 sd_pos=145714 sysload=0.28 cputime=68.665 memavail=7292628 print_time=1639.302 buffer_time=2.231 print_stall=0 extruder: target=240 temp=240.0 pwm=0.610
Stats 790105.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=995283 bytes_read=478868 bytes_retransmit=9 bytes_invalid=0 send_seq=26827 receive_seq=26827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=98 freq=119993045 heater_bed: target=80 temp=79.8 pwm=0.507 sd_pos=146144 sysload=0.28 cputime=68.750 memavail=7292628 print_time=1640.437 buffer_time=2.365 print_stall=0 extruder: target=240 temp=239.9 pwm=0.589
Stats 790106.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=998749 bytes_read=479406 bytes_retransmit=9 bytes_invalid=0 send_seq=26891 receive_seq=26879 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=612 upcoming_bytes=533 freq=119993035 heater_bed: target=80 temp=79.8 pwm=0.548 sd_pos=146595 sysload=0.28 cputime=68.838 memavail=7292628 print_time=1641.491 buffer_time=2.409 print_stall=0 extruder: target=240 temp=239.8 pwm=0.589
Stats 790107.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1003322 bytes_read=480186 bytes_retransmit=9 bytes_invalid=0 send_seq=26971 receive_seq=26971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993065 heater_bed: target=80 temp=79.9 pwm=0.457 sd_pos=147132 sysload=0.25 cputime=68.911 memavail=7292624 print_time=1642.417 buffer_time=2.335 print_stall=0 extruder: target=240 temp=240.3 pwm=0.399
Stats 790108.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1006977 bytes_read=480823 bytes_retransmit=9 bytes_invalid=0 send_seq=27040 receive_seq=27040 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993053 heater_bed: target=80 temp=79.9 pwm=0.457 sd_pos=147603 sysload=0.25 cputime=68.992 memavail=7292624 print_time=1643.327 buffer_time=2.244 print_stall=0 extruder: target=240 temp=240.3 pwm=0.472
Stats 790109.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1009848 bytes_read=481386 bytes_retransmit=9 bytes_invalid=0 send_seq=27097 receive_seq=27097 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993042 heater_bed: target=80 temp=79.8 pwm=0.546 sd_pos=148896 sysload=0.25 cputime=69.055 memavail=7292624 print_time=1644.088 buffer_time=2.006 print_stall=0 extruder: target=240 temp=240.8 pwm=0.262
Stats 790110.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1014817 bytes_read=482139 bytes_retransmit=9 bytes_invalid=0 send_seq=27189 receive_seq=27189 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993028 heater_bed: target=80 temp=79.9 pwm=0.519 sd_pos=150444 sysload=0.25 cputime=69.144 memavail=7292624 print_time=1645.291 buffer_time=2.207 print_stall=0 extruder: target=240 temp=240.5 pwm=0.464
Stats 790111.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1018190 bytes_read=482761 bytes_retransmit=9 bytes_invalid=0 send_seq=27255 receive_seq=27255 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993022 heater_bed: target=80 temp=79.9 pwm=0.470 sd_pos=151285 sysload=0.25 cputime=69.213 memavail=7292624 print_time=1646.134 buffer_time=2.050 print_stall=0 extruder: target=240 temp=240.3 pwm=0.551
Stats 790112.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1022530 bytes_read=483455 bytes_retransmit=9 bytes_invalid=0 send_seq=27335 receive_seq=27335 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993013 heater_bed: target=80 temp=79.9 pwm=0.381 sd_pos=152975 sysload=0.23 cputime=69.293 memavail=7292624 print_time=1647.253 buffer_time=2.169 print_stall=0 extruder: target=240 temp=240.3 pwm=0.484
Stats 790113.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1026382 bytes_read=484088 bytes_retransmit=9 bytes_invalid=0 send_seq=27404 receive_seq=27404 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993012 heater_bed: target=80 temp=79.9 pwm=0.443 sd_pos=154299 sysload=0.23 cputime=69.363 memavail=7292624 print_time=1648.192 buffer_time=2.106 print_stall=0 extruder: target=240 temp=240.1 pwm=0.484
Stats 790114.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1030049 bytes_read=484707 bytes_retransmit=9 bytes_invalid=0 send_seq=27471 receive_seq=27471 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993004 heater_bed: target=80 temp=79.9 pwm=0.443 sd_pos=154911 sysload=0.23 cputime=69.433 memavail=7292624 print_time=1649.150 buffer_time=2.064 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 790115.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1034374 bytes_read=485380 bytes_retransmit=9 bytes_invalid=0 send_seq=27551 receive_seq=27551 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119992994 heater_bed: target=80 temp=79.9 pwm=0.480 sd_pos=156516 sysload=0.23 cputime=69.519 memavail=7292624 print_time=1650.219 buffer_time=2.133 print_stall=0 extruder: target=240 temp=239.9 pwm=0.546
Stats 790116.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1038898 bytes_read=486088 bytes_retransmit=9 bytes_invalid=0 send_seq=27634 receive_seq=27634 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=572 freq=119992988 heater_bed: target=80 temp=80.0 pwm=0.383 sd_pos=158210 sysload=0.23 cputime=69.604 memavail=7292624 print_time=1651.475 buffer_time=2.388 print_stall=0 extruder: target=240 temp=240.2 pwm=0.399
Stats 790117.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1042852 bytes_read=486761 bytes_retransmit=9 bytes_invalid=0 send_seq=27707 receive_seq=27707 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992983 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=159416 sysload=0.21 cputime=69.684 memavail=7292624 print_time=1652.291 buffer_time=2.203 print_stall=0 extruder: target=240 temp=240.0 pwm=0.495
Stats 790118.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1046335 bytes_read=487359 bytes_retransmit=9 bytes_invalid=0 send_seq=27771 receive_seq=27771 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992977 heater_bed: target=80 temp=80.0 pwm=0.347 sd_pos=160592 sysload=0.21 cputime=69.758 memavail=7292624 print_time=1653.127 buffer_time=2.038 print_stall=0 extruder: target=240 temp=240.1 pwm=0.430
Stats 790119.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1050585 bytes_read=488047 bytes_retransmit=9 bytes_invalid=0 send_seq=27850 receive_seq=27850 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992970 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=162179 sysload=0.21 cputime=69.840 memavail=7292624 print_time=1654.170 buffer_time=2.081 print_stall=0 extruder: target=240 temp=239.8 pwm=0.525
Stats 790120.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1054561 bytes_read=488694 bytes_retransmit=9 bytes_invalid=0 send_seq=27921 receive_seq=27921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992967 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=163343 sysload=0.21 cputime=69.927 memavail=7292624 print_time=1655.148 buffer_time=2.058 print_stall=0 extruder: target=240 temp=239.9 pwm=0.520
Stats 790121.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1059309 bytes_read=489407 bytes_retransmit=9 bytes_invalid=0 send_seq=28008 receive_seq=28008 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992957 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=165057 sysload=0.21 cputime=70.014 memavail=7292628 print_time=1656.335 buffer_time=2.245 print_stall=0 extruder: target=240 temp=240.1 pwm=0.469
Stats 790122.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1062713 bytes_read=490041 bytes_retransmit=9 bytes_invalid=0 send_seq=28073 receive_seq=28073 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992988 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=166222 sysload=0.20 cputime=70.093 memavail=7292628 print_time=1657.173 buffer_time=2.082 print_stall=0 extruder: target=240 temp=239.9 pwm=0.498
Stats 790123.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1067420 bytes_read=490768 bytes_retransmit=9 bytes_invalid=0 send_seq=28160 receive_seq=28160 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992978 heater_bed: target=80 temp=80.0 pwm=0.537 sd_pos=167774 sysload=0.20 cputime=70.193 memavail=7292628 print_time=1658.356 buffer_time=2.264 print_stall=0 extruder: target=240 temp=239.8 pwm=0.544
Stats 790124.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1070721 bytes_read=491366 bytes_retransmit=9 bytes_invalid=0 send_seq=28224 receive_seq=28224 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992970 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=168909 sysload=0.20 cputime=70.281 memavail=7292628 print_time=1659.167 buffer_time=2.075 print_stall=0 extruder: target=240 temp=240.1 pwm=0.402
Stats 790125.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1075113 bytes_read=492074 bytes_retransmit=9 bytes_invalid=0 send_seq=28307 receive_seq=28307 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992963 heater_bed: target=80 temp=80.0 pwm=0.513 sd_pos=170520 sysload=0.20 cputime=70.377 memavail=7292628 print_time=1660.278 buffer_time=2.185 print_stall=0 extruder: target=240 temp=239.7 pwm=0.584
Stats 790126.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1078743 bytes_read=492706 bytes_retransmit=9 bytes_invalid=0 send_seq=28375 receive_seq=28375 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992961 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=171714 sysload=0.20 cputime=70.458 memavail=7292628 print_time=1661.238 buffer_time=2.144 print_stall=0 extruder: target=240 temp=240.1 pwm=0.374
Stats 790127.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1082958 bytes_read=493405 bytes_retransmit=9 bytes_invalid=0 send_seq=28456 receive_seq=28456 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119992955 heater_bed: target=80 temp=80.0 pwm=0.559 sd_pos=173280 sysload=0.18 cputime=70.550 memavail=7292628 print_time=1662.333 buffer_time=2.238 print_stall=0 extruder: target=240 temp=240.1 pwm=0.394
Stats 790128.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1086355 bytes_read=494028 bytes_retransmit=9 bytes_invalid=0 send_seq=28522 receive_seq=28522 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992951 heater_bed: target=80 temp=80.0 pwm=0.512 sd_pos=174530 sysload=0.18 cputime=70.632 memavail=7292628 print_time=1663.208 buffer_time=2.111 print_stall=0 extruder: target=240 temp=239.9 pwm=0.542
Stats 790129.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1090420 bytes_read=494700 bytes_retransmit=9 bytes_invalid=0 send_seq=28598 receive_seq=28598 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992948 heater_bed: target=80 temp=80.0 pwm=0.512 sd_pos=176003 sysload=0.18 cputime=70.712 memavail=7292628 print_time=1664.354 buffer_time=2.256 print_stall=0 extruder: target=240 temp=240.2 pwm=0.467
Stats 790130.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1093477 bytes_read=495268 bytes_retransmit=9 bytes_invalid=0 send_seq=28656 receive_seq=28656 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992946 heater_bed: target=80 temp=79.9 pwm=0.512 sd_pos=177139 sysload=0.18 cputime=70.794 memavail=7292628 print_time=1665.207 buffer_time=2.108 print_stall=0 extruder: target=240 temp=239.9 pwm=0.598
Stats 790131.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1096771 bytes_read=495881 bytes_retransmit=9 bytes_invalid=0 send_seq=28720 receive_seq=28720 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992956 heater_bed: target=80 temp=79.9 pwm=0.446 sd_pos=178036 sysload=0.18 cputime=70.884 memavail=7292632 print_time=1666.677 buffer_time=2.578 print_stall=0 extruder: target=240 temp=239.7 pwm=0.615
Stats 790132.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1097622 bytes_read=496314 bytes_retransmit=9 bytes_invalid=0 send_seq=28745 receive_seq=28745 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992953 heater_bed: target=80 temp=79.9 pwm=0.488 sd_pos=178093 sysload=0.17 cputime=70.948 memavail=7292632 print_time=1667.607 buffer_time=2.507 print_stall=0 extruder: target=240 temp=240.1 pwm=0.392
Stats 790133.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1098974 bytes_read=496752 bytes_retransmit=9 bytes_invalid=0 send_seq=28777 receive_seq=28777 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992948 heater_bed: target=80 temp=79.9 pwm=0.600 sd_pos=178349 sysload=0.17 cputime=71.014 memavail=7292632 print_time=1669.305 buffer_time=3.204 print_stall=0 extruder: target=240 temp=240.1 pwm=0.461
Stats 790134.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1099211 bytes_read=497125 bytes_retransmit=9 bytes_invalid=0 send_seq=28793 receive_seq=28793 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992941 heater_bed: target=80 temp=79.9 pwm=0.346 sd_pos=178349 sysload=0.17 cputime=71.066 memavail=7292632 print_time=1669.305 buffer_time=2.204 print_stall=0 extruder: target=240 temp=239.8 pwm=0.534
Stats 790135.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1099727 bytes_read=497522 bytes_retransmit=9 bytes_invalid=0 send_seq=28814 receive_seq=28814 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992934 heater_bed: target=80 temp=79.9 pwm=0.458 sd_pos=178378 sysload=0.17 cputime=71.125 memavail=7292632 print_time=1670.828 buffer_time=2.727 print_stall=0 extruder: target=240 temp=239.7 pwm=0.600
Stats 790136.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1100033 bytes_read=497880 bytes_retransmit=9 bytes_invalid=0 send_seq=28830 receive_seq=28830 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992975 heater_bed: target=80 temp=79.9 pwm=0.509 sd_pos=178405 sysload=0.17 cputime=71.194 memavail=7293036 print_time=1671.756 buffer_time=2.654 print_stall=0 extruder: target=240 temp=240.1 pwm=0.501
Stats 790137.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1100612 bytes_read=498288 bytes_retransmit=9 bytes_invalid=0 send_seq=28850 receive_seq=28850 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992970 heater_bed: target=80 temp=79.8 pwm=0.485 sd_pos=178405 sysload=0.23 cputime=71.262 memavail=7293108 print_time=1672.325 buffer_time=2.222 print_stall=0 extruder: target=240 temp=240.3 pwm=0.432
Stats 790138.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1101219 bytes_read=498675 bytes_retransmit=9 bytes_invalid=0 send_seq=28869 receive_seq=28869 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992967 heater_bed: target=80 temp=79.8 pwm=0.595 sd_pos=178405 sysload=0.23 cputime=71.320 memavail=7293108 print_time=1673.380 buffer_time=2.277 print_stall=0 extruder: target=240 temp=239.8 pwm=0.706
Stats 790139.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1101765 bytes_read=499053 bytes_retransmit=9 bytes_invalid=0 send_seq=28889 receive_seq=28889 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992968 heater_bed: target=80 temp=79.8 pwm=0.569 sd_pos=178561 sysload=0.23 cputime=71.383 memavail=7293108 print_time=1674.957 buffer_time=2.853 print_stall=0 extruder: target=240 temp=240.3 pwm=0.396
Stats 790140.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1102317 bytes_read=499441 bytes_retransmit=9 bytes_invalid=0 send_seq=28908 receive_seq=28908 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992962 heater_bed: target=80 temp=79.8 pwm=0.466 sd_pos=178706 sysload=0.23 cputime=71.438 memavail=7293108 print_time=1675.249 buffer_time=2.144 print_stall=0 extruder: target=240 temp=240.2 pwm=0.436
Stats 790141.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1102991 bytes_read=499823 bytes_retransmit=9 bytes_invalid=0 send_seq=28926 receive_seq=28926 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119992967 heater_bed: target=80 temp=79.9 pwm=0.466 sd_pos=178791 sysload=0.23 cputime=71.504 memavail=7292888 print_time=1676.812 buffer_time=2.707 print_stall=0 extruder: target=240 temp=239.8 pwm=0.623
Stats 790142.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1104317 bytes_read=500281 bytes_retransmit=9 bytes_invalid=0 send_seq=28959 receive_seq=28959 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992962 heater_bed: target=80 temp=79.9 pwm=0.466 sd_pos=178992 sysload=0.29 cputime=71.566 memavail=7292888 print_time=1677.837 buffer_time=2.731 print_stall=0 extruder: target=240 temp=239.6 pwm=0.691
Stats 790143.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1105308 bytes_read=500699 bytes_retransmit=9 bytes_invalid=0 send_seq=28984 receive_seq=28984 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992958 heater_bed: target=80 temp=79.9 pwm=0.466 sd_pos=179195 sysload=0.29 cputime=71.624 memavail=7292888 print_time=1678.233 buffer_time=2.127 print_stall=0 extruder: target=240 temp=239.5 pwm=0.663
Stats 790144.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1106212 bytes_read=501116 bytes_retransmit=9 bytes_invalid=0 send_seq=29009 receive_seq=29009 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992957 heater_bed: target=80 temp=79.9 pwm=0.472 sd_pos=179252 sysload=0.29 cputime=71.685 memavail=7292888 print_time=1679.119 buffer_time=2.011 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 790145.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1107240 bytes_read=501524 bytes_retransmit=9 bytes_invalid=0 send_seq=29035 receive_seq=29035 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993013 heater_bed: target=80 temp=79.9 pwm=0.538 sd_pos=179455 sysload=0.29 cputime=71.745 memavail=7292888 print_time=1680.734 buffer_time=2.626 print_stall=0 extruder: target=240 temp=240.3 pwm=0.441
Stats 790146.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1107691 bytes_read=501907 bytes_retransmit=9 bytes_invalid=0 send_seq=29053 receive_seq=29053 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993005 heater_bed: target=80 temp=79.9 pwm=0.509 sd_pos=179483 sysload=0.29 cputime=71.796 memavail=7292888 print_time=1682.256 buffer_time=3.148 print_stall=0 extruder: target=240 temp=239.8 pwm=0.667
Stats 790147.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1107885 bytes_read=502284 bytes_retransmit=9 bytes_invalid=0 send_seq=29067 receive_seq=29067 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992995 heater_bed: target=80 temp=79.9 pwm=0.430 sd_pos=179483 sysload=0.35 cputime=71.839 memavail=7292888 print_time=1682.256 buffer_time=2.147 print_stall=0 extruder: target=240 temp=240.7 pwm=0.205
Stats 790148.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1108212 bytes_read=502647 bytes_retransmit=9 bytes_invalid=0 send_seq=29084 receive_seq=29084 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992985 heater_bed: target=80 temp=79.9 pwm=0.587 sd_pos=179511 sysload=0.35 cputime=71.887 memavail=7292888 print_time=1683.202 buffer_time=2.092 print_stall=0 extruder: target=240 temp=239.6 pwm=0.711
Stats 790149.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1109155 bytes_read=503060 bytes_retransmit=9 bytes_invalid=0 send_seq=29109 receive_seq=29109 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993014 heater_bed: target=80 temp=79.9 pwm=0.475 sd_pos=179511 sysload=0.35 cputime=71.937 memavail=7292888 print_time=1684.267 buffer_time=2.157 print_stall=0 extruder: target=240 temp=239.6 pwm=0.660
Stats 790150.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1109792 bytes_read=503449 bytes_retransmit=9 bytes_invalid=0 send_seq=29130 receive_seq=29130 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993005 heater_bed: target=80 temp=79.8 pwm=0.609 sd_pos=179656 sysload=0.35 cputime=71.990 memavail=7292888 print_time=1686.460 buffer_time=3.349 print_stall=0 extruder: target=240 temp=239.8 pwm=0.556
Stats 790151.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1109986 bytes_read=503793 bytes_retransmit=9 bytes_invalid=0 send_seq=29144 receive_seq=29144 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992995 heater_bed: target=80 temp=79.9 pwm=0.482 sd_pos=179656 sysload=0.35 cputime=72.035 memavail=7292640 print_time=1686.460 buffer_time=2.349 print_stall=0 extruder: target=240 temp=240.0 pwm=0.486
Stats 790152.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1110857 bytes_read=504211 bytes_retransmit=9 bytes_invalid=0 send_seq=29166 receive_seq=29166 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992988 heater_bed: target=80 temp=79.9 pwm=0.404 sd_pos=179828 sysload=0.40 cputime=72.093 memavail=7292640 print_time=1687.176 buffer_time=2.065 print_stall=0 extruder: target=240 temp=240.1 pwm=0.482
Stats 790153.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1111302 bytes_read=504598 bytes_retransmit=9 bytes_invalid=0 send_seq=29185 receive_seq=29185 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992982 heater_bed: target=80 temp=79.9 pwm=0.502 sd_pos=179885 sysload=0.40 cputime=72.144 memavail=7292640 print_time=1688.342 buffer_time=2.231 print_stall=0 extruder: target=240 temp=240.4 pwm=0.392
Stats 790154.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1112629 bytes_read=505026 bytes_retransmit=9 bytes_invalid=0 send_seq=29215 receive_seq=29215 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992980 heater_bed: target=80 temp=79.9 pwm=0.425 sd_pos=180001 sysload=0.40 cputime=72.200 memavail=7292640 print_time=1689.413 buffer_time=2.301 print_stall=0 extruder: target=240 temp=240.1 pwm=0.512
Stats 790155.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1116045 bytes_read=505644 bytes_retransmit=9 bytes_invalid=0 send_seq=29280 receive_seq=29280 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992970 heater_bed: target=80 temp=79.9 pwm=0.478 sd_pos=180658 sysload=0.40 cputime=72.273 memavail=7292640 print_time=1690.315 buffer_time=2.203 print_stall=0 extruder: target=240 temp=240.1 pwm=0.501
Stats 790156.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1119950 bytes_read=506301 bytes_retransmit=9 bytes_invalid=0 send_seq=29353 receive_seq=29353 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992963 heater_bed: target=80 temp=79.9 pwm=0.558 sd_pos=181611 sysload=0.40 cputime=72.341 memavail=7292192 print_time=1691.283 buffer_time=2.170 print_stall=0 extruder: target=240 temp=240.1 pwm=0.517
Stats 790157.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1124589 bytes_read=507020 bytes_retransmit=9 bytes_invalid=0 send_seq=29438 receive_seq=29438 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=14 freq=119992957 heater_bed: target=80 temp=79.9 pwm=0.420 sd_pos=182409 sysload=0.37 cputime=72.419 memavail=7292192 print_time=1692.464 buffer_time=2.350 print_stall=0 extruder: target=240 temp=239.8 pwm=0.606
Stats 790158.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1128043 bytes_read=507633 bytes_retransmit=9 bytes_invalid=0 send_seq=29502 receive_seq=29502 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992987 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=182722 sysload=0.37 cputime=72.486 memavail=7291968 print_time=1693.484 buffer_time=2.369 print_stall=0 extruder: target=240 temp=240.2 pwm=0.472
Stats 790159.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1131164 bytes_read=508225 bytes_retransmit=9 bytes_invalid=0 send_seq=29562 receive_seq=29562 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992982 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=183094 sysload=0.37 cputime=72.552 memavail=7291968 print_time=1694.355 buffer_time=2.240 print_stall=0 extruder: target=240 temp=240.3 pwm=0.401
Stats 790160.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1135028 bytes_read=508868 bytes_retransmit=9 bytes_invalid=0 send_seq=29635 receive_seq=29635 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992975 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=183680 sysload=0.37 cputime=72.621 memavail=7291968 print_time=1695.255 buffer_time=2.138 print_stall=0 extruder: target=240 temp=240.1 pwm=0.505
Stats 790161.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1138968 bytes_read=509531 bytes_retransmit=9 bytes_invalid=0 send_seq=29709 receive_seq=29709 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992967 heater_bed: target=80 temp=80.0 pwm=0.402 sd_pos=184176 sysload=0.37 cputime=72.691 memavail=7291968 print_time=1696.248 buffer_time=2.132 print_stall=0 extruder: target=240 temp=240.2 pwm=0.469
Stats 790162.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1143785 bytes_read=510284 bytes_retransmit=9 bytes_invalid=0 send_seq=29798 receive_seq=29798 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=300 freq=119992962 heater_bed: target=80 temp=80.0 pwm=0.402 sd_pos=185515 sysload=0.34 cputime=72.774 memavail=7291968 print_time=1697.468 buffer_time=2.351 print_stall=0 extruder: target=240 temp=240.1 pwm=0.535
Stats 790163.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1147658 bytes_read=510932 bytes_retransmit=9 bytes_invalid=0 send_seq=29872 receive_seq=29872 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119993012 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=186499 sysload=0.34 cputime=72.873 memavail=7291968 print_time=1698.307 buffer_time=2.190 print_stall=0 extruder: target=240 temp=240.1 pwm=0.527
Stats 790164.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1151470 bytes_read=511570 bytes_retransmit=9 bytes_invalid=0 send_seq=29941 receive_seq=29941 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119993004 heater_bed: target=80 temp=80.1 pwm=0.339 sd_pos=186967 sysload=0.34 cputime=72.954 memavail=7291520 print_time=1699.275 buffer_time=2.156 print_stall=0 extruder: target=240 temp=240.2 pwm=0.491
Stats 790165.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1155399 bytes_read=512227 bytes_retransmit=9 bytes_invalid=0 send_seq=30014 receive_seq=30014 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992995 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=187914 sysload=0.34 cputime=73.027 memavail=7291552 print_time=1700.212 buffer_time=2.093 print_stall=0 extruder: target=240 temp=240.3 pwm=0.485
Stats 790166.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1159245 bytes_read=512860 bytes_retransmit=9 bytes_invalid=0 send_seq=30085 receive_seq=30085 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992990 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=188949 sysload=0.34 cputime=73.117 memavail=7291852 print_time=1701.096 buffer_time=1.976 print_stall=0 extruder: target=240 temp=240.0 pwm=0.574
Stats 790167.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1164389 bytes_read=513624 bytes_retransmit=9 bytes_invalid=0 send_seq=30176 receive_seq=30176 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=793 freq=119993026 heater_bed: target=80 temp=80.1 pwm=0.393 sd_pos=190222 sysload=0.39 cputime=73.210 memavail=7291852 print_time=1702.618 buffer_time=2.497 print_stall=0 extruder: target=240 temp=239.9 pwm=0.574
Stats 790168.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1167875 bytes_read=514242 bytes_retransmit=9 bytes_invalid=0 send_seq=30239 receive_seq=30239 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993022 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=190911 sysload=0.39 cputime=73.285 memavail=7291852 print_time=1703.195 buffer_time=2.072 print_stall=0 extruder: target=240 temp=240.1 pwm=0.519
Stats 790169.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1171758 bytes_read=514890 bytes_retransmit=9 bytes_invalid=0 send_seq=30313 receive_seq=30313 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993016 heater_bed: target=80 temp=80.1 pwm=0.353 sd_pos=191862 sysload=0.39 cputime=73.362 memavail=7291852 print_time=1704.124 buffer_time=2.001 print_stall=0 extruder: target=240 temp=240.2 pwm=0.422
Stats 790170.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1176346 bytes_read=515598 bytes_retransmit=9 bytes_invalid=0 send_seq=30396 receive_seq=30396 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993009 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=193128 sysload=0.39 cputime=73.457 memavail=7291852 print_time=1705.198 buffer_time=2.075 print_stall=0 extruder: target=240 temp=240.1 pwm=0.489
Stats 790171.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1180753 bytes_read=516275 bytes_retransmit=9 bytes_invalid=0 send_seq=30473 receive_seq=30473 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119993040 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=194136 sysload=0.39 cputime=73.544 memavail=7291852 print_time=1706.259 buffer_time=2.135 print_stall=0 extruder: target=240 temp=240.0 pwm=0.553
Stats 790172.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1184481 bytes_read=516899 bytes_retransmit=9 bytes_invalid=0 send_seq=30539 receive_seq=30539 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993031 heater_bed: target=80 temp=80.1 pwm=0.388 sd_pos=195114 sysload=0.36 cputime=73.619 memavail=7291852 print_time=1707.189 buffer_time=2.064 print_stall=0 extruder: target=240 temp=239.9 pwm=0.616
Stats 790173.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1189263 bytes_read=517552 bytes_retransmit=9 bytes_invalid=0 send_seq=30623 receive_seq=30611 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=211 upcoming_bytes=273 freq=119993026 heater_bed: target=80 temp=80.1 pwm=0.554 sd_pos=196487 sysload=0.36 cputime=73.706 memavail=7291852 print_time=1708.409 buffer_time=2.279 print_stall=0 extruder: target=240 temp=240.1 pwm=0.507
Stats 790174.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1193447 bytes_read=518284 bytes_retransmit=9 bytes_invalid=0 send_seq=30699 receive_seq=30699 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=109 freq=119993018 heater_bed: target=80 temp=80.1 pwm=0.389 sd_pos=197413 sysload=0.36 cputime=73.796 memavail=7291852 print_time=1709.338 buffer_time=2.208 print_stall=0 extruder: target=240 temp=240.0 pwm=0.507
Stats 790175.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1197432 bytes_read=518917 bytes_retransmit=9 bytes_invalid=0 send_seq=30770 receive_seq=30770 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993046 heater_bed: target=80 temp=80.1 pwm=0.386 sd_pos=198385 sysload=0.36 cputime=73.883 memavail=7291852 print_time=1710.253 buffer_time=2.122 print_stall=0 extruder: target=240 temp=239.9 pwm=0.562
Stats 790176.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1201148 bytes_read=519555 bytes_retransmit=9 bytes_invalid=0 send_seq=30839 receive_seq=30839 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993043 heater_bed: target=80 temp=80.1 pwm=0.438 sd_pos=199274 sysload=0.36 cputime=73.967 memavail=7294584 print_time=1711.135 buffer_time=2.004 print_stall=0 extruder: target=240 temp=240.0 pwm=0.488
Stats 790177.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1206089 bytes_read=520308 bytes_retransmit=9 bytes_invalid=0 send_seq=30928 receive_seq=30928 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119993030 heater_bed: target=80 temp=80.1 pwm=0.438 sd_pos=200551 sysload=0.33 cputime=74.052 memavail=7294360 print_time=1712.335 buffer_time=2.203 print_stall=0 extruder: target=240 temp=239.9 pwm=0.529
Stats 790178.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1209651 bytes_read=520911 bytes_retransmit=9 bytes_invalid=0 send_seq=30993 receive_seq=30993 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993017 heater_bed: target=80 temp=80.1 pwm=0.438 sd_pos=201467 sysload=0.33 cputime=74.123 memavail=7294140 print_time=1713.218 buffer_time=2.085 print_stall=0 extruder: target=240 temp=239.6 pwm=0.653
Stats 790179.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1213474 bytes_read=521564 bytes_retransmit=9 bytes_invalid=0 send_seq=31065 receive_seq=31065 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993010 heater_bed: target=80 temp=80.0 pwm=0.554 sd_pos=202412 sysload=0.33 cputime=74.205 memavail=7293692 print_time=1714.132 buffer_time=1.999 print_stall=0 extruder: target=240 temp=240.1 pwm=0.391
Stats 790180.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1218218 bytes_read=522291 bytes_retransmit=9 bytes_invalid=0 send_seq=31152 receive_seq=31152 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993000 heater_bed: target=80 temp=80.1 pwm=0.505 sd_pos=203636 sysload=0.33 cputime=74.291 memavail=7293692 print_time=1715.336 buffer_time=2.202 print_stall=0 extruder: target=240 temp=239.8 pwm=0.603
Stats 790181.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1221821 bytes_read=522919 bytes_retransmit=9 bytes_invalid=0 send_seq=31222 receive_seq=31222 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992992 heater_bed: target=80 temp=80.1 pwm=0.451 sd_pos=204524 sysload=0.33 cputime=74.368 memavail=7293692 print_time=1716.235 buffer_time=2.099 print_stall=0 extruder: target=240 temp=239.9 pwm=0.514
Stats 790182.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1226133 bytes_read=523573 bytes_retransmit=9 bytes_invalid=0 send_seq=31303 receive_seq=31291 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=436 upcoming_bytes=0 freq=119992982 heater_bed: target=80 temp=80.0 pwm=0.535 sd_pos=205830 sysload=0.47 cputime=74.452 memavail=7293692 print_time=1717.440 buffer_time=2.292 print_stall=0 extruder: target=240 temp=239.8 pwm=0.578
Stats 790183.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1230101 bytes_read=524305 bytes_retransmit=9 bytes_invalid=0 send_seq=31379 receive_seq=31379 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992977 heater_bed: target=80 temp=80.1 pwm=0.387 sd_pos=206720 sysload=0.47 cputime=74.524 memavail=7293468 print_time=1718.322 buffer_time=2.173 print_stall=0 extruder: target=240 temp=240.2 pwm=0.423
Stats 790184.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1233659 bytes_read=524908 bytes_retransmit=9 bytes_invalid=0 send_seq=31444 receive_seq=31444 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993031 heater_bed: target=80 temp=80.0 pwm=0.504 sd_pos=207693 sysload=0.47 cputime=74.606 memavail=7293020 print_time=1719.237 buffer_time=2.088 print_stall=0 extruder: target=240 temp=240.0 pwm=0.520
Stats 790185.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1238036 bytes_read=525593 bytes_retransmit=9 bytes_invalid=0 send_seq=31524 receive_seq=31524 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119993026 heater_bed: target=80 temp=80.0 pwm=0.555 sd_pos=208915 sysload=0.47 cputime=74.686 memavail=7293020 print_time=1720.405 buffer_time=2.254 print_stall=0 extruder: target=240 temp=240.1 pwm=0.454
Stats 790186.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1241565 bytes_read=526217 bytes_retransmit=9 bytes_invalid=0 send_seq=31592 receive_seq=31592 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993027 heater_bed: target=80 temp=80.0 pwm=0.548 sd_pos=209862 sysload=0.47 cputime=74.758 memavail=7293020 print_time=1721.319 buffer_time=2.168 print_stall=0 extruder: target=240 temp=240.0 pwm=0.522
Stats 790187.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1244931 bytes_read=526819 bytes_retransmit=9 bytes_invalid=0 send_seq=31654 receive_seq=31654 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993018 heater_bed: target=80 temp=80.0 pwm=0.548 sd_pos=210842 sysload=0.43 cputime=74.828 memavail=7293020 print_time=1722.268 buffer_time=2.116 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 790188.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1246528 bytes_read=527292 bytes_retransmit=9 bytes_invalid=0 send_seq=31690 receive_seq=31690 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993053 heater_bed: target=80 temp=79.9 pwm=0.541 sd_pos=211091 sysload=0.43 cputime=74.898 memavail=7293020 print_time=1723.225 buffer_time=2.070 print_stall=0 extruder: target=240 temp=239.7 pwm=0.633
Stats 790189.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1247332 bytes_read=527699 bytes_retransmit=9 bytes_invalid=0 send_seq=31713 receive_seq=31713 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993044 heater_bed: target=80 temp=79.9 pwm=0.541 sd_pos=211148 sysload=0.43 cputime=74.955 memavail=7293020 print_time=1724.154 buffer_time=1.999 print_stall=0 extruder: target=240 temp=239.8 pwm=0.564
Stats 790190.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1248686 bytes_read=528132 bytes_retransmit=9 bytes_invalid=0 send_seq=31744 receive_seq=31744 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993035 heater_bed: target=80 temp=79.9 pwm=0.505 sd_pos=211392 sysload=0.43 cputime=75.019 memavail=7293028 print_time=1725.852 buffer_time=2.696 print_stall=0 extruder: target=240 temp=240.0 pwm=0.501
Stats 790191.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1249165 bytes_read=528515 bytes_retransmit=9 bytes_invalid=0 send_seq=31762 receive_seq=31762 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993024 heater_bed: target=80 temp=79.9 pwm=0.497 sd_pos=211445 sysload=0.43 cputime=75.083 memavail=7293280 print_time=1727.376 buffer_time=3.218 print_stall=0 extruder: target=240 temp=240.1 pwm=0.476
Stats 790192.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1249359 bytes_read=528892 bytes_retransmit=9 bytes_invalid=0 send_seq=31776 receive_seq=31776 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993012 heater_bed: target=80 temp=79.9 pwm=0.556 sd_pos=211445 sysload=0.39 cputime=75.137 memavail=7293280 print_time=1727.376 buffer_time=2.217 print_stall=0 extruder: target=240 temp=240.0 pwm=0.529
Stats 790193.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1249628 bytes_read=529235 bytes_retransmit=9 bytes_invalid=0 send_seq=31789 receive_seq=31789 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993059 heater_bed: target=80 temp=79.9 pwm=0.621 sd_pos=211472 sysload=0.39 cputime=75.195 memavail=7293280 print_time=1728.304 buffer_time=2.145 print_stall=0 extruder: target=240 temp=240.2 pwm=0.436
Stats 790194.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1250514 bytes_read=529657 bytes_retransmit=9 bytes_invalid=0 send_seq=31812 receive_seq=31812 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119993046 heater_bed: target=80 temp=79.9 pwm=0.483 sd_pos=211472 sysload=0.39 cputime=75.253 memavail=7293280 print_time=1729.334 buffer_time=2.174 print_stall=0 extruder: target=240 temp=240.0 pwm=0.547
Stats 790195.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1251142 bytes_read=530045 bytes_retransmit=9 bytes_invalid=0 send_seq=31834 receive_seq=31834 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993034 heater_bed: target=80 temp=79.9 pwm=0.622 sd_pos=211616 sysload=0.39 cputime=75.317 memavail=7293280 print_time=1731.504 buffer_time=3.344 print_stall=0 extruder: target=240 temp=240.2 pwm=0.441
Stats 790196.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1251358 bytes_read=530393 bytes_retransmit=9 bytes_invalid=0 send_seq=31848 receive_seq=31848 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993025 heater_bed: target=80 temp=79.8 pwm=0.611 sd_pos=211616 sysload=0.39 cputime=75.370 memavail=7293280 print_time=1731.504 buffer_time=2.343 print_stall=0 extruder: target=240 temp=240.1 pwm=0.522
Stats 790197.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1252205 bytes_read=530835 bytes_retransmit=9 bytes_invalid=0 send_seq=31872 receive_seq=31872 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119993032 heater_bed: target=80 temp=79.9 pwm=0.410 sd_pos=211789 sysload=0.36 cputime=75.439 memavail=7296360 print_time=1732.211 buffer_time=2.049 print_stall=0 extruder: target=240 temp=239.7 pwm=0.624
Stats 790198.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1252658 bytes_read=531203 bytes_retransmit=9 bytes_invalid=0 send_seq=31890 receive_seq=31890 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993023 heater_bed: target=80 temp=79.9 pwm=0.577 sd_pos=211846 sysload=0.36 cputime=75.497 memavail=7296136 print_time=1733.359 buffer_time=2.197 print_stall=0 extruder: target=240 temp=239.7 pwm=0.647
Stats 790199.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1253986 bytes_read=531641 bytes_retransmit=9 bytes_invalid=0 send_seq=31922 receive_seq=31922 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993011 heater_bed: target=80 temp=79.9 pwm=0.552 sd_pos=212047 sysload=0.36 cputime=75.555 memavail=7296136 print_time=1734.384 buffer_time=2.221 print_stall=0 extruder: target=240 temp=240.2 pwm=0.482
Stats 790200.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1255343 bytes_read=532108 bytes_retransmit=9 bytes_invalid=0 send_seq=31954 receive_seq=31954 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992998 heater_bed: target=80 temp=80.0 pwm=0.380 sd_pos=212319 sysload=0.36 cputime=75.612 memavail=7296136 print_time=1735.541 buffer_time=2.377 print_stall=0 extruder: target=240 temp=239.9 pwm=0.641
Stats 790201.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1256794 bytes_read=532566 bytes_retransmit=9 bytes_invalid=0 send_seq=31990 receive_seq=31990 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992995 heater_bed: target=80 temp=79.9 pwm=0.470 sd_pos=212522 sysload=0.36 cputime=75.666 memavail=7295648 print_time=1737.281 buffer_time=3.117 print_stall=0 extruder: target=240 temp=239.8 pwm=0.574
Stats 790202.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1256994 bytes_read=532924 bytes_retransmit=9 bytes_invalid=0 send_seq=32003 receive_seq=32003 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992986 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=212522 sysload=0.33 cputime=75.706 memavail=7295648 print_time=1737.281 buffer_time=2.116 print_stall=0 extruder: target=240 temp=240.0 pwm=0.440
Stats 790203.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1257425 bytes_read=533311 bytes_retransmit=9 bytes_invalid=0 send_seq=32019 receive_seq=32019 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992984 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=212550 sysload=0.33 cputime=75.750 memavail=7295648 print_time=1738.803 buffer_time=2.638 print_stall=0 extruder: target=240 temp=239.8 pwm=0.527
Stats 790204.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1257699 bytes_read=533654 bytes_retransmit=9 bytes_invalid=0 send_seq=32032 receive_seq=32032 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992976 heater_bed: target=80 temp=79.9 pwm=0.480 sd_pos=212578 sysload=0.33 cputime=75.799 memavail=7295648 print_time=1739.749 buffer_time=2.583 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 790206.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1258284 bytes_read=534027 bytes_retransmit=9 bytes_invalid=0 send_seq=32051 receive_seq=32051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992971 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=212578 sysload=0.33 cputime=75.848 memavail=7295648 print_time=1740.353 buffer_time=2.187 print_stall=0 extruder: target=240 temp=240.2 pwm=0.428
Stats 790207.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1258911 bytes_read=534434 bytes_retransmit=9 bytes_invalid=0 send_seq=32071 receive_seq=32071 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993029 heater_bed: target=80 temp=80.0 pwm=0.384 sd_pos=212578 sysload=0.33 cputime=75.898 memavail=7295648 print_time=1741.260 buffer_time=2.092 print_stall=0 extruder: target=240 temp=240.0 pwm=0.580
Stats 790208.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1259468 bytes_read=534827 bytes_retransmit=9 bytes_invalid=0 send_seq=32091 receive_seq=32091 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993019 heater_bed: target=80 temp=79.9 pwm=0.486 sd_pos=212723 sysload=0.31 cputime=75.951 memavail=7295648 print_time=1743.007 buffer_time=2.838 print_stall=0 extruder: target=240 temp=239.5 pwm=0.770
Stats 790209.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1260033 bytes_read=535200 bytes_retransmit=9 bytes_invalid=0 send_seq=32110 receive_seq=32110 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119993013 heater_bed: target=80 temp=79.9 pwm=0.503 sd_pos=212867 sysload=0.31 cputime=75.999 memavail=7295648 print_time=1743.306 buffer_time=2.137 print_stall=0 extruder: target=240 temp=239.6 pwm=0.605
Stats 790210.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1260747 bytes_read=535607 bytes_retransmit=9 bytes_invalid=0 send_seq=32130 receive_seq=32130 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993000 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=212952 sysload=0.31 cputime=76.063 memavail=7295648 print_time=1744.889 buffer_time=2.720 print_stall=0 extruder: target=240 temp=239.6 pwm=0.605
Stats 790211.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1262107 bytes_read=536040 bytes_retransmit=9 bytes_invalid=0 send_seq=32161 receive_seq=32161 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992996 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=213068 sysload=0.31 cputime=76.118 memavail=7295648 print_time=1745.960 buffer_time=2.791 print_stall=0 extruder: target=240 temp=240.4 pwm=0.281
Stats 790212.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1264214 bytes_read=536538 bytes_retransmit=9 bytes_invalid=0 send_seq=32205 receive_seq=32205 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993031 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=213409 sysload=0.31 cputime=76.173 memavail=7294168 print_time=1746.564 buffer_time=2.394 print_stall=0 extruder: target=240 temp=240.4 pwm=0.381
Stats 790213.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1266708 bytes_read=537105 bytes_retransmit=9 bytes_invalid=0 send_seq=32254 receive_seq=32254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993021 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=214127 sysload=0.28 cputime=76.241 memavail=7294168 print_time=1747.209 buffer_time=2.038 print_stall=0 extruder: target=240 temp=240.4 pwm=0.443
Stats 790214.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1271315 bytes_read=537803 bytes_retransmit=9 bytes_invalid=0 send_seq=32338 receive_seq=32338 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993017 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=214842 sysload=0.28 cputime=76.312 memavail=7294168 print_time=1748.425 buffer_time=2.253 print_stall=0 extruder: target=240 temp=239.8 pwm=0.654
Stats 790215.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1273923 bytes_read=538331 bytes_retransmit=9 bytes_invalid=0 send_seq=32388 receive_seq=32388 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993008 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=215020 sysload=0.28 cputime=76.368 memavail=7294168 print_time=1749.208 buffer_time=2.035 print_stall=0 extruder: target=240 temp=239.5 pwm=0.728
Stats 790216.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1278833 bytes_read=539093 bytes_retransmit=9 bytes_invalid=0 send_seq=32479 receive_seq=32479 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119993025 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=215517 sysload=0.28 cputime=76.437 memavail=7294168 print_time=1750.700 buffer_time=2.527 print_stall=0 extruder: target=240 temp=239.4 pwm=0.703
Stats 790217.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1281533 bytes_read=539641 bytes_retransmit=9 bytes_invalid=0 send_seq=32533 receive_seq=32533 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119993018 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=216349 sysload=0.28 cputime=76.499 memavail=7294200 print_time=1751.395 buffer_time=2.222 print_stall=0 extruder: target=240 temp=240.0 pwm=0.402
Stats 790218.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1284851 bytes_read=540250 bytes_retransmit=9 bytes_invalid=0 send_seq=32596 receive_seq=32596 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993011 heater_bed: target=80 temp=80.0 pwm=0.345 sd_pos=217411 sysload=0.26 cputime=76.572 memavail=7294200 print_time=1752.299 buffer_time=2.124 print_stall=0 extruder: target=240 temp=240.3 pwm=0.405
Stats 790219.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1289482 bytes_read=540977 bytes_retransmit=9 bytes_invalid=0 send_seq=32680 receive_seq=32680 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119992998 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=218367 sysload=0.26 cputime=76.656 memavail=7290772 print_time=1753.515 buffer_time=2.340 print_stall=0 extruder: target=240 temp=240.4 pwm=0.462
Stats 790220.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1292698 bytes_read=541570 bytes_retransmit=9 bytes_invalid=0 send_seq=32743 receive_seq=32743 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992993 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=219195 sysload=0.26 cputime=76.723 memavail=7293920 print_time=1754.389 buffer_time=2.214 print_stall=0 extruder: target=240 temp=240.4 pwm=0.490
Stats 790221.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1296052 bytes_read=542181 bytes_retransmit=9 bytes_invalid=0 send_seq=32807 receive_seq=32807 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993052 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=219963 sysload=0.26 cputime=76.804 memavail=7293920 print_time=1755.277 buffer_time=2.101 print_stall=0 extruder: target=240 temp=240.4 pwm=0.447
Stats 790222.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1300439 bytes_read=542865 bytes_retransmit=9 bytes_invalid=0 send_seq=32887 receive_seq=32887 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119993039 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=220971 sysload=0.26 cputime=76.871 memavail=7293920 print_time=1756.461 buffer_time=2.284 print_stall=0 extruder: target=240 temp=240.0 pwm=0.538
Stats 790223.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1303767 bytes_read=543467 bytes_retransmit=9 bytes_invalid=0 send_seq=32950 receive_seq=32950 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993028 heater_bed: target=80 temp=80.1 pwm=0.360 sd_pos=221826 sysload=0.24 cputime=76.945 memavail=7293920 print_time=1757.375 buffer_time=2.197 print_stall=0 extruder: target=240 temp=240.1 pwm=0.463
Stats 790224.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1307012 bytes_read=544069 bytes_retransmit=9 bytes_invalid=0 send_seq=33012 receive_seq=33012 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119993020 heater_bed: target=80 temp=80.1 pwm=0.424 sd_pos=222985 sysload=0.24 cputime=77.020 memavail=7293920 print_time=1758.254 buffer_time=2.074 print_stall=0 extruder: target=240 temp=240.3 pwm=0.436
Stats 790225.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1311332 bytes_read=544756 bytes_retransmit=9 bytes_invalid=0 send_seq=33091 receive_seq=33091 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119993070 heater_bed: target=80 temp=80.1 pwm=0.425 sd_pos=224541 sysload=0.24 cputime=77.106 memavail=7293924 print_time=1759.425 buffer_time=2.245 print_stall=0 extruder: target=240 temp=240.1 pwm=0.545
Stats 790226.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1314590 bytes_read=545349 bytes_retransmit=9 bytes_invalid=0 send_seq=33154 receive_seq=33154 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119993058 heater_bed: target=80 temp=80.1 pwm=0.418 sd_pos=225740 sysload=0.24 cputime=77.185 memavail=7293924 print_time=1760.304 buffer_time=2.123 print_stall=0 extruder: target=240 temp=239.9 pwm=0.587
Stats 790227.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1318043 bytes_read=545967 bytes_retransmit=9 bytes_invalid=0 send_seq=33219 receive_seq=33219 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119993054 heater_bed: target=80 temp=80.1 pwm=0.379 sd_pos=226860 sysload=0.24 cputime=77.269 memavail=7293744 print_time=1761.197 buffer_time=2.014 print_stall=0 extruder: target=240 temp=240.0 pwm=0.487
Stats 790228.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1322358 bytes_read=546660 bytes_retransmit=9 bytes_invalid=0 send_seq=33296 receive_seq=33296 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119993050 heater_bed: target=80 temp=80.1 pwm=0.407 sd_pos=228468 sysload=0.22 cputime=77.368 memavail=7293920 print_time=1762.368 buffer_time=2.185 print_stall=0 extruder: target=240 temp=240.1 pwm=0.487
Stats 790229.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1325617 bytes_read=547259 bytes_retransmit=9 bytes_invalid=0 send_seq=33358 receive_seq=33358 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993031 heater_bed: target=80 temp=80.1 pwm=0.380 sd_pos=229639 sysload=0.22 cputime=77.448 memavail=7293920 print_time=1763.247 buffer_time=2.062 print_stall=0 extruder: target=240 temp=240.0 pwm=0.487
Stats 790230.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1329785 bytes_read=547937 bytes_retransmit=9 bytes_invalid=0 send_seq=33435 receive_seq=33435 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993020 heater_bed: target=80 temp=80.1 pwm=0.500 sd_pos=231195 sysload=0.22 cputime=77.533 memavail=7293920 print_time=1764.418 buffer_time=2.233 print_stall=0 extruder: target=240 temp=240.1 pwm=0.487
Stats 790231.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1332837 bytes_read=548529 bytes_retransmit=9 bytes_invalid=0 send_seq=33495 receive_seq=33495 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993013 heater_bed: target=80 temp=80.1 pwm=0.433 sd_pos=232215 sysload=0.22 cputime=77.608 memavail=7293920 print_time=1765.315 buffer_time=2.129 print_stall=0 extruder: target=240 temp=239.7 pwm=0.666
Stats 790232.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1336854 bytes_read=549152 bytes_retransmit=9 bytes_invalid=0 send_seq=33571 receive_seq=33564 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119993005 heater_bed: target=80 temp=80.1 pwm=0.461 sd_pos=233733 sysload=0.22 cputime=77.694 memavail=7293448 print_time=1766.469 buffer_time=2.282 print_stall=0 extruder: target=240 temp=239.8 pwm=0.567
Stats 790233.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1340155 bytes_read=549811 bytes_retransmit=9 bytes_invalid=0 send_seq=33634 receive_seq=33634 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993047 heater_bed: target=80 temp=80.1 pwm=0.461 sd_pos=234910 sysload=0.28 cputime=77.779 memavail=7293448 print_time=1767.347 buffer_time=2.160 print_stall=0 extruder: target=240 temp=239.8 pwm=0.526
Stats 790234.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1343372 bytes_read=550413 bytes_retransmit=9 bytes_invalid=0 send_seq=33696 receive_seq=33696 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993040 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=236109 sysload=0.28 cputime=77.862 memavail=7293448 print_time=1768.226 buffer_time=2.038 print_stall=0 extruder: target=240 temp=240.1 pwm=0.406
Stats 790235.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1347148 bytes_read=551041 bytes_retransmit=9 bytes_invalid=0 send_seq=33766 receive_seq=33766 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993029 heater_bed: target=80 temp=80.1 pwm=0.468 sd_pos=237256 sysload=0.28 cputime=77.940 memavail=7293448 print_time=1769.214 buffer_time=2.025 print_stall=0 extruder: target=240 temp=240.1 pwm=0.470
Stats 790236.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1351071 bytes_read=551694 bytes_retransmit=9 bytes_invalid=0 send_seq=33838 receive_seq=33838 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993025 heater_bed: target=80 temp=80.0 pwm=0.506 sd_pos=238779 sysload=0.28 cputime=78.028 memavail=7293448 print_time=1770.301 buffer_time=2.111 print_stall=0 extruder: target=240 temp=240.1 pwm=0.470
Stats 790237.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1355032 bytes_read=552296 bytes_retransmit=9 bytes_invalid=0 send_seq=33912 receive_seq=33900 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=273 upcoming_bytes=0 freq=119993030 heater_bed: target=80 temp=80.0 pwm=0.559 sd_pos=240357 sysload=0.28 cputime=78.114 memavail=7293448 print_time=1771.473 buffer_time=2.281 print_stall=0 extruder: target=240 temp=240.0 pwm=0.539
Stats 790238.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1358449 bytes_read=552970 bytes_retransmit=9 bytes_invalid=0 send_seq=33976 receive_seq=33976 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993014 heater_bed: target=80 temp=80.0 pwm=0.552 sd_pos=241523 sysload=0.34 cputime=78.194 memavail=7293448 print_time=1772.351 buffer_time=2.159 print_stall=0 extruder: target=240 temp=239.7 pwm=0.678
Stats 790239.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1361716 bytes_read=553573 bytes_retransmit=9 bytes_invalid=0 send_seq=34038 receive_seq=34038 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992998 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=242845 sysload=0.34 cputime=78.283 memavail=7293448 print_time=1773.269 buffer_time=2.076 print_stall=0 extruder: target=240 temp=239.8 pwm=0.546
Stats 790240.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1363256 bytes_read=554040 bytes_retransmit=9 bytes_invalid=0 send_seq=34073 receive_seq=34073 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992987 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=243094 sysload=0.34 cputime=78.348 memavail=7293448 print_time=1774.226 buffer_time=2.032 print_stall=0 extruder: target=240 temp=239.8 pwm=0.511
Stats 790241.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1365188 bytes_read=554528 bytes_retransmit=9 bytes_invalid=0 send_seq=34115 receive_seq=34115 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992980 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=243383 sysload=0.34 cputime=78.412 memavail=7293448 print_time=1776.853 buffer_time=3.659 print_stall=0 extruder: target=240 temp=239.7 pwm=0.613
Stats 790242.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1365445 bytes_read=554891 bytes_retransmit=9 bytes_invalid=0 send_seq=34129 receive_seq=34129 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992970 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=243383 sysload=0.34 cputime=78.465 memavail=7293452 print_time=1776.853 buffer_time=2.658 print_stall=0 extruder: target=240 temp=240.0 pwm=0.470
Stats 790243.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1365944 bytes_read=555298 bytes_retransmit=9 bytes_invalid=0 send_seq=34149 receive_seq=34149 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992960 heater_bed: target=80 temp=80.1 pwm=0.335 sd_pos=243412 sysload=0.31 cputime=78.524 memavail=7293452 print_time=1778.377 buffer_time=3.180 print_stall=0 extruder: target=240 temp=240.4 pwm=0.350
Stats 790244.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1366138 bytes_read=555646 bytes_retransmit=9 bytes_invalid=0 send_seq=34163 receive_seq=34163 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992949 heater_bed: target=80 temp=80.1 pwm=0.335 sd_pos=243412 sysload=0.31 cputime=78.582 memavail=7293452 print_time=1778.377 buffer_time=2.179 print_stall=0 extruder: target=240 temp=240.1 pwm=0.479
Stats 790245.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1366423 bytes_read=556009 bytes_retransmit=9 bytes_invalid=0 send_seq=34177 receive_seq=34177 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992946 heater_bed: target=80 temp=80.1 pwm=0.469 sd_pos=243439 sysload=0.31 cputime=78.642 memavail=7293452 print_time=1779.305 buffer_time=2.106 print_stall=0 extruder: target=240 temp=240.1 pwm=0.547
Stats 790246.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1367312 bytes_read=556421 bytes_retransmit=9 bytes_invalid=0 send_seq=34201 receive_seq=34201 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992994 heater_bed: target=80 temp=80.1 pwm=0.371 sd_pos=243439 sysload=0.31 cputime=78.702 memavail=7293452 print_time=1780.335 buffer_time=2.135 print_stall=0 extruder: target=240 temp=239.6 pwm=0.728
Stats 790247.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1367918 bytes_read=556799 bytes_retransmit=9 bytes_invalid=0 send_seq=34221 receive_seq=34221 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992985 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=243583 sysload=0.31 cputime=78.762 memavail=7293452 print_time=1782.506 buffer_time=3.305 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 790248.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1368107 bytes_read=557172 bytes_retransmit=9 bytes_invalid=0 send_seq=34234 receive_seq=34234 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992974 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=243583 sysload=0.29 cputime=78.814 memavail=7293452 print_time=1782.506 buffer_time=2.305 print_stall=0 extruder: target=240 temp=239.9 pwm=0.529
Stats 790249.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1368968 bytes_read=557579 bytes_retransmit=9 bytes_invalid=0 send_seq=34257 receive_seq=34257 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992973 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=243756 sysload=0.29 cputime=78.879 memavail=7293452 print_time=1783.212 buffer_time=2.011 print_stall=0 extruder: target=240 temp=240.0 pwm=0.527
Stats 790250.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1369402 bytes_read=557947 bytes_retransmit=9 bytes_invalid=0 send_seq=34275 receive_seq=34275 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993036 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=243837 sysload=0.29 cputime=78.943 memavail=7293452 print_time=1784.361 buffer_time=2.158 print_stall=0 extruder: target=240 temp=240.4 pwm=0.334
Stats 790251.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1370701 bytes_read=558400 bytes_retransmit=9 bytes_invalid=0 send_seq=34307 receive_seq=34307 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993025 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=244038 sysload=0.29 cputime=79.002 memavail=7293452 print_time=1785.385 buffer_time=2.182 print_stall=0 extruder: target=240 temp=240.1 pwm=0.495
Stats 790252.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1372060 bytes_read=558857 bytes_retransmit=9 bytes_invalid=0 send_seq=34340 receive_seq=34340 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993017 heater_bed: target=80 temp=80.1 pwm=0.411 sd_pos=244310 sysload=0.29 cputime=79.063 memavail=7293452 print_time=1786.542 buffer_time=2.338 print_stall=0 extruder: target=240 temp=240.1 pwm=0.495
Stats 790253.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=1373489 bytes_read=559320 bytes_retransmit=9 bytes_invalid=0 send_seq=34374 receive_seq=34374 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993006 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=244513 sysload=0.26 cputime=79.126 memavail=7293452 print_time=1788.282 buffer_time=3.077 print_stall=0 extruder: target=240 temp=239.8 pwm=0.563
Stats 790254.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=1373699 bytes_read=559688 bytes_retransmit=9 bytes_invalid=0 send_seq=34389 receive_seq=34389 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992995 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=244513 sysload=0.26 cputime=79.182 memavail=7293452 print_time=1788.282 buffer_time=2.077 print_stall=0 extruder: target=240 temp=239.8 pwm=0.584
Stats 790255.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=1374183 bytes_read=560080 bytes_retransmit=9 bytes_invalid=0 send_seq=34409 receive_seq=34409 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993015 heater_bed: target=80 temp=80.0 pwm=0.644 sd_pos=244541 sysload=0.26 cputime=79.240 memavail=7293452 print_time=1789.805 buffer_time=2.599 print_stall=0 extruder: target=240 temp=240.1 pwm=0.449
Stats 790256.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=1374527 bytes_read=560438 bytes_retransmit=9 bytes_invalid=0 send_seq=34425 receive_seq=34425 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993001 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=244569 sysload=0.26 cputime=79.296 memavail=7293452 print_time=1790.750 buffer_time=2.544 print_stall=0 extruder: target=240 temp=240.0 pwm=0.574
Stats 790257.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=1375081 bytes_read=560818 bytes_retransmit=9 bytes_invalid=0 send_seq=34443 receive_seq=34443 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992986 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=244569 sysload=0.26 cputime=79.342 memavail=7293228 print_time=1791.355 buffer_time=2.148 print_stall=0 extruder: target=240 temp=240.2 pwm=0.500
Stats 790258.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1375693 bytes_read=561212 bytes_retransmit=9 bytes_invalid=0 send_seq=34462 receive_seq=34462 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992978 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=244569 sysload=0.24 cputime=79.396 memavail=7293228 print_time=1792.261 buffer_time=2.054 print_stall=0 extruder: target=240 temp=239.8 pwm=0.607
Stats 790259.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1376272 bytes_read=561585 bytes_retransmit=9 bytes_invalid=0 send_seq=34482 receive_seq=34482 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992973 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=244714 sysload=0.24 cputime=79.461 memavail=7293196 print_time=1794.008 buffer_time=2.800 print_stall=0 extruder: target=240 temp=239.8 pwm=0.590
Stats 790260.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1376915 bytes_read=561983 bytes_retransmit=9 bytes_invalid=0 send_seq=34503 receive_seq=34503 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992965 heater_bed: target=80 temp=79.9 pwm=0.551 sd_pos=244858 sysload=0.24 cputime=79.512 memavail=7293196 print_time=1794.307 buffer_time=2.099 print_stall=0 extruder: target=240 temp=240.1 pwm=0.484
Stats 790261.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1377631 bytes_read=562385 bytes_retransmit=9 bytes_invalid=0 send_seq=34525 receive_seq=34525 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992958 heater_bed: target=80 temp=80.0 pwm=0.281 sd_pos=244943 sysload=0.24 cputime=79.570 memavail=7293200 print_time=1795.891 buffer_time=2.681 print_stall=0 extruder: target=240 temp=240.1 pwm=0.409
Stats 790262.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1378977 bytes_read=562823 bytes_retransmit=9 bytes_invalid=0 send_seq=34557 receive_seq=34557 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992951 heater_bed: target=80 temp=80.0 pwm=0.332 sd_pos=245071 sysload=0.24 cputime=79.623 memavail=7293200 print_time=1796.961 buffer_time=2.751 print_stall=0 extruder: target=240 temp=239.8 pwm=0.592
Stats 790263.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1381089 bytes_read=563361 bytes_retransmit=9 bytes_invalid=0 send_seq=34603 receive_seq=34603 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992946 heater_bed: target=80 temp=80.0 pwm=0.304 sd_pos=245467 sysload=0.22 cputime=79.692 memavail=7293200 print_time=1797.576 buffer_time=2.365 print_stall=0 extruder: target=240 temp=240.1 pwm=0.472
Stats 790264.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1383923 bytes_read=563943 bytes_retransmit=9 bytes_invalid=0 send_seq=34661 receive_seq=34661 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992942 heater_bed: target=80 temp=80.0 pwm=0.379 sd_pos=246528 sysload=0.22 cputime=79.770 memavail=7293200 print_time=1798.352 buffer_time=2.140 print_stall=0 extruder: target=240 temp=239.8 pwm=0.573
Stats 790265.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1386954 bytes_read=564521 bytes_retransmit=9 bytes_invalid=0 send_seq=34721 receive_seq=34721 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992935 heater_bed: target=80 temp=80.0 pwm=0.368 sd_pos=247130 sysload=0.22 cputime=79.830 memavail=7293208 print_time=1799.404 buffer_time=2.192 print_stall=0 extruder: target=240 temp=239.5 pwm=0.761
Stats 790266.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1390669 bytes_read=565164 bytes_retransmit=9 bytes_invalid=0 send_seq=34791 receive_seq=34791 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992928 heater_bed: target=80 temp=80.0 pwm=0.531 sd_pos=247558 sysload=0.22 cputime=79.890 memavail=7293208 print_time=1800.576 buffer_time=2.363 print_stall=0 extruder: target=240 temp=239.6 pwm=0.600
Stats 790267.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1394533 bytes_read=565821 bytes_retransmit=9 bytes_invalid=0 send_seq=34864 receive_seq=34864 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992921 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=248053 sysload=0.22 cputime=79.959 memavail=7293208 print_time=1801.630 buffer_time=2.417 print_stall=0 extruder: target=240 temp=240.1 pwm=0.416
Stats 790268.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1396910 bytes_read=566355 bytes_retransmit=9 bytes_invalid=0 send_seq=34912 receive_seq=34912 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992915 heater_bed: target=80 temp=80.1 pwm=0.415 sd_pos=248965 sysload=0.28 cputime=80.022 memavail=7293208 print_time=1802.271 buffer_time=2.057 print_stall=0 extruder: target=240 temp=240.1 pwm=0.498
Stats 790269.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1400658 bytes_read=567008 bytes_retransmit=9 bytes_invalid=0 send_seq=34984 receive_seq=34984 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992909 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=250656 sysload=0.28 cputime=80.106 memavail=7293208 print_time=1803.364 buffer_time=2.150 print_stall=0 extruder: target=240 temp=240.5 pwm=0.396
Stats 790270.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1404340 bytes_read=567660 bytes_retransmit=9 bytes_invalid=0 send_seq=35056 receive_seq=35056 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=80.1 pwm=0.384 sd_pos=251353 sysload=0.28 cputime=80.185 memavail=7293208 print_time=1804.292 buffer_time=2.078 print_stall=0 extruder: target=240 temp=239.9 pwm=0.656
Stats 790271.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1408132 bytes_read=568298 bytes_retransmit=9 bytes_invalid=0 send_seq=35128 receive_seq=35128 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992900 heater_bed: target=80 temp=80.0 pwm=0.560 sd_pos=252596 sysload=0.28 cputime=80.265 memavail=7293208 print_time=1805.417 buffer_time=2.201 print_stall=0 extruder: target=240 temp=240.0 pwm=0.573
Stats 790272.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1411497 bytes_read=568916 bytes_retransmit=9 bytes_invalid=0 send_seq=35193 receive_seq=35193 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992896 heater_bed: target=80 temp=80.0 pwm=0.503 sd_pos=253503 sysload=0.28 cputime=80.344 memavail=7293212 print_time=1806.430 buffer_time=2.214 print_stall=0 extruder: target=240 temp=240.1 pwm=0.559
Stats 790273.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1414668 bytes_read=569544 bytes_retransmit=9 bytes_invalid=0 send_seq=35257 receive_seq=35257 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992929 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=254411 sysload=0.26 cputime=80.426 memavail=7293212 print_time=1807.306 buffer_time=2.090 print_stall=0 extruder: target=240 temp=240.5 pwm=0.277
Stats 790274.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1418370 bytes_read=570172 bytes_retransmit=9 bytes_invalid=0 send_seq=35327 receive_seq=35327 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992924 heater_bed: target=80 temp=80.1 pwm=0.322 sd_pos=255984 sysload=0.26 cputime=80.505 memavail=7293212 print_time=1808.414 buffer_time=2.197 print_stall=0 extruder: target=240 temp=240.0 pwm=0.544
Stats 790275.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1422109 bytes_read=570810 bytes_retransmit=9 bytes_invalid=0 send_seq=35396 receive_seq=35396 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992917 heater_bed: target=80 temp=80.1 pwm=0.327 sd_pos=257754 sysload=0.26 cputime=80.587 memavail=7293212 print_time=1809.470 buffer_time=2.253 print_stall=0 extruder: target=240 temp=240.2 pwm=0.480
Stats 790276.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1425078 bytes_read=571402 bytes_retransmit=9 bytes_invalid=0 send_seq=35456 receive_seq=35456 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.1 pwm=0.461 sd_pos=259127 sysload=0.26 cputime=80.666 memavail=7292988 print_time=1810.263 buffer_time=2.044 print_stall=0 extruder: target=240 temp=239.9 pwm=0.650
Stats 790277.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1429220 bytes_read=572060 bytes_retransmit=9 bytes_invalid=0 send_seq=35532 receive_seq=35532 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992939 heater_bed: target=80 temp=80.1 pwm=0.445 sd_pos=260844 sysload=0.26 cputime=80.748 memavail=7292540 print_time=1811.364 buffer_time=2.144 print_stall=0 extruder: target=240 temp=240.2 pwm=0.479
Stats 790278.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1433044 bytes_read=572719 bytes_retransmit=9 bytes_invalid=0 send_seq=35602 receive_seq=35602 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119992929 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=262692 sysload=0.24 cputime=80.848 memavail=7292540 print_time=1812.420 buffer_time=2.200 print_stall=0 extruder: target=240 temp=239.8 pwm=0.605
Stats 790279.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1436666 bytes_read=573301 bytes_retransmit=9 bytes_invalid=0 send_seq=35672 receive_seq=35660 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=146 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=80.1 pwm=0.342 sd_pos=264455 sysload=0.24 cputime=80.938 memavail=7292540 print_time=1813.476 buffer_time=2.256 print_stall=0 extruder: target=240 temp=239.9 pwm=0.485
Stats 790280.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1439502 bytes_read=573909 bytes_retransmit=9 bytes_invalid=0 send_seq=35726 receive_seq=35726 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992922 heater_bed: target=80 temp=80.1 pwm=0.461 sd_pos=265779 sysload=0.24 cputime=81.010 memavail=7292540 print_time=1814.269 buffer_time=2.048 print_stall=0 extruder: target=240 temp=239.8 pwm=0.557
Stats 790281.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1442973 bytes_read=574537 bytes_retransmit=9 bytes_invalid=0 send_seq=35793 receive_seq=35793 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992918 heater_bed: target=80 temp=80.1 pwm=0.448 sd_pos=267405 sysload=0.24 cputime=81.088 memavail=7292540 print_time=1815.373 buffer_time=2.151 print_stall=0 extruder: target=240 temp=239.9 pwm=0.528
Stats 790282.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1446612 bytes_read=575174 bytes_retransmit=9 bytes_invalid=0 send_seq=35862 receive_seq=35862 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.1 pwm=0.373 sd_pos=269175 sysload=0.24 cputime=81.179 memavail=7292548 print_time=1816.429 buffer_time=2.207 print_stall=0 extruder: target=240 temp=239.8 pwm=0.592
Stats 790283.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1449507 bytes_read=575753 bytes_retransmit=9 bytes_invalid=0 send_seq=35919 receive_seq=35919 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992910 heater_bed: target=80 temp=80.1 pwm=0.388 sd_pos=270543 sysload=0.22 cputime=81.264 memavail=7292548 print_time=1817.221 buffer_time=1.999 print_stall=0 extruder: target=240 temp=240.0 pwm=0.547
Stats 790284.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1454279 bytes_read=576486 bytes_retransmit=9 bytes_invalid=0 send_seq=36007 receive_seq=36007 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992908 heater_bed: target=80 temp=80.1 pwm=0.467 sd_pos=272691 sysload=0.22 cputime=81.370 memavail=7292548 print_time=1818.578 buffer_time=2.355 print_stall=0 extruder: target=240 temp=240.4 pwm=0.379
Stats 790285.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1457203 bytes_read=577063 bytes_retransmit=9 bytes_invalid=0 send_seq=36064 receive_seq=36064 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=80 temp=80.0 pwm=0.539 sd_pos=274060 sysload=0.22 cputime=81.444 memavail=7292548 print_time=1819.371 buffer_time=2.147 print_stall=0 extruder: target=240 temp=239.6 pwm=0.728
Stats 790286.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1460928 bytes_read=577696 bytes_retransmit=9 bytes_invalid=0 send_seq=36135 receive_seq=36135 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992933 heater_bed: target=80 temp=80.0 pwm=0.563 sd_pos=275859 sysload=0.22 cputime=81.537 memavail=7292548 print_time=1820.427 buffer_time=2.202 print_stall=0 extruder: target=240 temp=239.5 pwm=0.656
Stats 790287.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1463719 bytes_read=578259 bytes_retransmit=9 bytes_invalid=0 send_seq=36189 receive_seq=36189 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992927 heater_bed: target=80 temp=80.0 pwm=0.536 sd_pos=277209 sysload=0.22 cputime=81.635 memavail=7292696 print_time=1821.219 buffer_time=1.994 print_stall=0 extruder: target=240 temp=239.8 pwm=0.539
Stats 790288.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1467037 bytes_read=578887 bytes_retransmit=9 bytes_invalid=0 send_seq=36253 receive_seq=36253 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992921 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=278873 sysload=0.20 cputime=81.724 memavail=7292768 print_time=1822.229 buffer_time=2.004 print_stall=0 extruder: target=240 temp=240.1 pwm=0.455
Stats 790289.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1469228 bytes_read=579395 bytes_retransmit=9 bytes_invalid=0 send_seq=36299 receive_seq=36299 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992915 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=279177 sysload=0.20 cputime=81.804 memavail=7292768 print_time=1824.116 buffer_time=2.887 print_stall=0 extruder: target=240 temp=240.4 pwm=0.301
Stats 790290.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1470638 bytes_read=579874 bytes_retransmit=9 bytes_invalid=0 send_seq=36334 receive_seq=36334 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992917 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=279409 sysload=0.20 cputime=81.870 memavail=7292544 print_time=1825.814 buffer_time=3.584 print_stall=0 extruder: target=240 temp=239.8 pwm=0.675
Stats 790291.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1470891 bytes_read=580251 bytes_retransmit=9 bytes_invalid=0 send_seq=36351 receive_seq=36351 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992915 heater_bed: target=80 temp=80.0 pwm=0.344 sd_pos=279409 sysload=0.20 cputime=81.932 memavail=7292544 print_time=1825.814 buffer_time=2.579 print_stall=0 extruder: target=240 temp=239.8 pwm=0.593
Stats 790292.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1471349 bytes_read=580609 bytes_retransmit=9 bytes_invalid=0 send_seq=36367 receive_seq=36367 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992912 heater_bed: target=80 temp=80.0 pwm=0.366 sd_pos=279438 sysload=0.20 cputime=81.991 memavail=7291788 print_time=1827.337 buffer_time=3.102 print_stall=0 extruder: target=240 temp=239.8 pwm=0.523
Stats 790293.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1471538 bytes_read=580976 bytes_retransmit=9 bytes_invalid=0 send_seq=36380 receive_seq=36380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.0 pwm=0.509 sd_pos=279438 sysload=0.19 cputime=82.045 memavail=7291792 print_time=1827.337 buffer_time=2.099 print_stall=0 extruder: target=240 temp=239.9 pwm=0.530
Stats 790294.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1471812 bytes_read=581330 bytes_retransmit=9 bytes_invalid=0 send_seq=36394 receive_seq=36394 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992907 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=279465 sysload=0.19 cputime=82.104 memavail=7291792 print_time=1828.265 buffer_time=2.027 print_stall=0 extruder: target=240 temp=239.8 pwm=0.612
Stats 790295.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1472723 bytes_read=581725 bytes_retransmit=9 bytes_invalid=0 send_seq=36418 receive_seq=36418 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992903 heater_bed: target=80 temp=80.0 pwm=0.563 sd_pos=279465 sysload=0.19 cputime=82.159 memavail=7291792 print_time=1829.295 buffer_time=2.055 print_stall=0 extruder: target=240 temp=240.1 pwm=0.544
Stats 790296.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1473351 bytes_read=582118 bytes_retransmit=9 bytes_invalid=0 send_seq=36438 receive_seq=36438 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=279609 sysload=0.19 cputime=82.235 memavail=7291792 print_time=1831.466 buffer_time=3.223 print_stall=0 extruder: target=240 temp=240.0 pwm=0.560
Stats 790297.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1473561 bytes_read=582485 bytes_retransmit=9 bytes_invalid=0 send_seq=36453 receive_seq=36453 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992900 heater_bed: target=80 temp=80.0 pwm=0.609 sd_pos=279609 sysload=0.19 cputime=82.291 memavail=7291792 print_time=1831.466 buffer_time=2.223 print_stall=0 extruder: target=240 temp=240.4 pwm=0.382
Stats 790298.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1474509 bytes_read=582893 bytes_retransmit=9 bytes_invalid=0 send_seq=36476 receive_seq=36476 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=80.0 pwm=0.519 sd_pos=279782 sysload=0.17 cputime=82.357 memavail=7291792 print_time=1832.470 buffer_time=2.227 print_stall=0 extruder: target=240 temp=239.9 pwm=0.646
Stats 790299.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1474916 bytes_read=583281 bytes_retransmit=9 bytes_invalid=0 send_seq=36495 receive_seq=36495 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992899 heater_bed: target=80 temp=80.1 pwm=0.315 sd_pos=279839 sysload=0.17 cputime=82.414 memavail=7291792 print_time=1833.321 buffer_time=2.077 print_stall=0 extruder: target=240 temp=239.6 pwm=0.747
Stats 790300.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1476256 bytes_read=583748 bytes_retransmit=9 bytes_invalid=0 send_seq=36530 receive_seq=36530 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992897 heater_bed: target=80 temp=80.0 pwm=0.517 sd_pos=280040 sysload=0.17 cputime=82.473 memavail=7291792 print_time=1834.346 buffer_time=2.101 print_stall=0 extruder: target=240 temp=239.7 pwm=0.661
Stats 790301.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1477599 bytes_read=584176 bytes_retransmit=9 bytes_invalid=0 send_seq=36560 receive_seq=36560 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=80.0 pwm=0.581 sd_pos=280300 sysload=0.17 cputime=82.535 memavail=7291792 print_time=1835.503 buffer_time=2.257 print_stall=0 extruder: target=240 temp=240.3 pwm=0.290
Stats 790302.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1479051 bytes_read=584649 bytes_retransmit=9 bytes_invalid=0 send_seq=36596 receive_seq=36596 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=80.1 pwm=0.300 sd_pos=280503 sysload=0.17 cputime=82.605 memavail=7292028 print_time=1837.243 buffer_time=2.996 print_stall=0 extruder: target=240 temp=239.7 pwm=0.612
Stats 790303.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1479474 bytes_read=585051 bytes_retransmit=9 bytes_invalid=0 send_seq=36615 receive_seq=36615 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=80.1 pwm=0.337 sd_pos=280531 sysload=0.24 cputime=82.667 memavail=7292048 print_time=1838.765 buffer_time=3.518 print_stall=0 extruder: target=240 temp=240.4 pwm=0.317
Stats 790304.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1479735 bytes_read=585399 bytes_retransmit=9 bytes_invalid=0 send_seq=36629 receive_seq=36629 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=280531 sysload=0.24 cputime=82.716 memavail=7292048 print_time=1838.765 buffer_time=2.517 print_stall=0 extruder: target=240 temp=240.4 pwm=0.337
Stats 790305.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1480073 bytes_read=585777 bytes_retransmit=9 bytes_invalid=0 send_seq=36646 receive_seq=36646 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992887 heater_bed: target=80 temp=80.1 pwm=0.269 sd_pos=280583 sysload=0.24 cputime=82.769 memavail=7292048 print_time=1839.711 buffer_time=2.462 print_stall=0 extruder: target=240 temp=240.3 pwm=0.426
Stats 790306.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1480669 bytes_read=586174 bytes_retransmit=9 bytes_invalid=0 send_seq=36667 receive_seq=36667 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992887 heater_bed: target=80 temp=80.0 pwm=0.483 sd_pos=280583 sysload=0.24 cputime=82.832 memavail=7292048 print_time=1840.315 buffer_time=2.066 print_stall=0 extruder: target=240 temp=239.7 pwm=0.741
Stats 790307.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1481647 bytes_read=586577 bytes_retransmit=9 bytes_invalid=0 send_seq=36692 receive_seq=36692 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992935 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=280728 sysload=0.24 cputime=82.902 memavail=7292048 print_time=1842.969 buffer_time=3.719 print_stall=0 extruder: target=240 temp=239.7 pwm=0.608
Stats 790308.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1481875 bytes_read=586960 bytes_retransmit=9 bytes_invalid=0 send_seq=36707 receive_seq=36707 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992933 heater_bed: target=80 temp=80.0 pwm=0.391 sd_pos=280728 sysload=0.22 cputime=82.955 memavail=7292048 print_time=1842.969 buffer_time=2.718 print_stall=0 extruder: target=240 temp=240.0 pwm=0.424
Stats 790309.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1482546 bytes_read=587367 bytes_retransmit=9 bytes_invalid=0 send_seq=36730 receive_seq=36730 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992927 heater_bed: target=80 temp=80.0 pwm=0.585 sd_pos=280872 sysload=0.22 cputime=83.015 memavail=7292048 print_time=1843.268 buffer_time=2.017 print_stall=0 extruder: target=240 temp=240.4 pwm=0.244
Stats 790310.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1483229 bytes_read=587740 bytes_retransmit=9 bytes_invalid=0 send_seq=36749 receive_seq=36749 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=80.0 pwm=0.345 sd_pos=280957 sysload=0.22 cputime=83.072 memavail=7292048 print_time=1844.851 buffer_time=2.599 print_stall=0 extruder: target=240 temp=240.4 pwm=0.339
Stats 790311.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1484631 bytes_read=588203 bytes_retransmit=9 bytes_invalid=0 send_seq=36783 receive_seq=36783 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992928 heater_bed: target=80 temp=80.0 pwm=0.532 sd_pos=281073 sysload=0.22 cputime=83.131 memavail=7292048 print_time=1845.922 buffer_time=2.669 print_stall=0 extruder: target=240 temp=239.8 pwm=0.668
Stats 790312.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1486938 bytes_read=588745 bytes_retransmit=9 bytes_invalid=0 send_seq=36833 receive_seq=36833 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992988 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=281439 sysload=0.22 cputime=83.198 memavail=7292048 print_time=1846.597 buffer_time=2.343 print_stall=0 extruder: target=240 temp=240.2 pwm=0.477
Stats 790313.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1489922 bytes_read=589328 bytes_retransmit=9 bytes_invalid=0 send_seq=36891 receive_seq=36891 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992982 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=282560 sysload=0.20 cputime=83.273 memavail=7292048 print_time=1847.395 buffer_time=2.141 print_stall=0 extruder: target=240 temp=240.4 pwm=0.422
Stats 790314.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1492843 bytes_read=589906 bytes_retransmit=9 bytes_invalid=0 send_seq=36948 receive_seq=36948 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992975 heater_bed: target=80 temp=80.0 pwm=0.532 sd_pos=283227 sysload=0.20 cputime=83.343 memavail=7292052 print_time=1848.431 buffer_time=2.176 print_stall=0 extruder: target=240 temp=240.1 pwm=0.548
Stats 790315.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1496007 bytes_read=590513 bytes_retransmit=9 bytes_invalid=0 send_seq=37011 receive_seq=37011 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992971 heater_bed: target=80 temp=80.0 pwm=0.338 sd_pos=283511 sysload=0.20 cputime=83.399 memavail=7292052 print_time=1849.403 buffer_time=2.148 print_stall=0 extruder: target=240 temp=239.6 pwm=0.629
Stats 790316.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1500927 bytes_read=591236 bytes_retransmit=9 bytes_invalid=0 send_seq=37100 receive_seq=37100 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992988 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=284200 sysload=0.20 cputime=83.464 memavail=7292052 print_time=1850.782 buffer_time=2.525 print_stall=0 extruder: target=240 temp=240.0 pwm=0.442
Stats 790317.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1502928 bytes_read=591763 bytes_retransmit=9 bytes_invalid=0 send_seq=37144 receive_seq=37144 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=11 freq=119992983 heater_bed: target=80 temp=80.1 pwm=0.353 sd_pos=285116 sysload=0.20 cputime=83.547 memavail=7292036 print_time=1851.308 buffer_time=2.050 print_stall=0 extruder: target=240 temp=240.4 pwm=0.375
Stats 790318.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1507036 bytes_read=592447 bytes_retransmit=9 bytes_invalid=0 send_seq=37222 receive_seq=37222 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992974 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=286924 sysload=0.18 cputime=83.631 memavail=7292036 print_time=1852.465 buffer_time=2.207 print_stall=0 extruder: target=240 temp=240.4 pwm=0.390
Stats 790319.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1510416 bytes_read=593040 bytes_retransmit=9 bytes_invalid=0 send_seq=37285 receive_seq=37285 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992970 heater_bed: target=80 temp=80.0 pwm=0.447 sd_pos=287478 sysload=0.18 cputime=83.692 memavail=7292036 print_time=1853.312 buffer_time=2.053 print_stall=0 extruder: target=240 temp=240.4 pwm=0.462
Stats 790320.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1513843 bytes_read=593672 bytes_retransmit=9 bytes_invalid=0 send_seq=37350 receive_seq=37350 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992963 heater_bed: target=80 temp=80.1 pwm=0.339 sd_pos=288429 sysload=0.18 cputime=83.759 memavail=7292036 print_time=1854.277 buffer_time=2.017 print_stall=0 extruder: target=240 temp=239.7 pwm=0.737
Stats 790321.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1517839 bytes_read=594320 bytes_retransmit=9 bytes_invalid=0 send_seq=37424 receive_seq=37424 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993018 heater_bed: target=80 temp=80.1 pwm=0.490 sd_pos=289655 sysload=0.18 cputime=83.845 memavail=7292036 print_time=1855.442 buffer_time=2.181 print_stall=0 extruder: target=240 temp=240.0 pwm=0.481
Stats 790322.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1521057 bytes_read=594903 bytes_retransmit=9 bytes_invalid=0 send_seq=37485 receive_seq=37485 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993005 heater_bed: target=80 temp=80.1 pwm=0.285 sd_pos=290572 sysload=0.18 cputime=83.912 memavail=7292036 print_time=1856.316 buffer_time=2.054 print_stall=0 extruder: target=240 temp=239.7 pwm=0.701
Stats 790323.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1525054 bytes_read=595596 bytes_retransmit=9 bytes_invalid=0 send_seq=37559 receive_seq=37559 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119993000 heater_bed: target=80 temp=80.1 pwm=0.524 sd_pos=292174 sysload=0.25 cputime=83.989 memavail=7292036 print_time=1857.423 buffer_time=2.161 print_stall=0 extruder: target=240 temp=240.3 pwm=0.365
Stats 790324.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1528914 bytes_read=596249 bytes_retransmit=9 bytes_invalid=0 send_seq=37634 receive_seq=37634 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992994 heater_bed: target=80 temp=80.1 pwm=0.564 sd_pos=293960 sysload=0.25 cputime=84.073 memavail=7292036 print_time=1858.476 buffer_time=2.213 print_stall=0 extruder: target=240 temp=240.0 pwm=0.544
Stats 790325.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1531951 bytes_read=596812 bytes_retransmit=9 bytes_invalid=0 send_seq=37691 receive_seq=37691 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993016 heater_bed: target=80 temp=80.1 pwm=0.445 sd_pos=295337 sysload=0.25 cputime=84.161 memavail=7292036 print_time=1859.265 buffer_time=2.001 print_stall=0 extruder: target=240 temp=240.4 pwm=0.309
Stats 790326.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1536207 bytes_read=597524 bytes_retransmit=9 bytes_invalid=0 send_seq=37772 receive_seq=37772 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993006 heater_bed: target=80 temp=80.1 pwm=0.387 sd_pos=297085 sysload=0.25 cputime=84.241 memavail=7292040 print_time=1860.367 buffer_time=2.102 print_stall=0 extruder: target=240 temp=240.1 pwm=0.469
Stats 790327.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1540123 bytes_read=598172 bytes_retransmit=9 bytes_invalid=0 send_seq=37846 receive_seq=37846 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993005 heater_bed: target=80 temp=80.1 pwm=0.354 sd_pos=298912 sysload=0.25 cputime=84.326 memavail=7292040 print_time=1861.420 buffer_time=2.154 print_stall=0 extruder: target=240 temp=239.6 pwm=0.704
Stats 790328.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1543936 bytes_read=598816 bytes_retransmit=9 bytes_invalid=0 send_seq=37916 receive_seq=37916 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992998 heater_bed: target=80 temp=80.1 pwm=0.400 sd_pos=300678 sysload=0.31 cputime=84.413 memavail=7292040 print_time=1862.473 buffer_time=2.206 print_stall=0 extruder: target=240 temp=239.5 pwm=0.596
Stats 790329.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1547591 bytes_read=599475 bytes_retransmit=9 bytes_invalid=0 send_seq=37988 receive_seq=37988 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119992996 heater_bed: target=80 temp=80.1 pwm=0.441 sd_pos=302300 sysload=0.31 cputime=84.503 memavail=7292040 print_time=1863.587 buffer_time=2.316 print_stall=0 extruder: target=240 temp=239.8 pwm=0.556
Stats 790330.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1550408 bytes_read=600016 bytes_retransmit=9 bytes_invalid=0 send_seq=38042 receive_seq=38042 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992990 heater_bed: target=80 temp=80.1 pwm=0.391 sd_pos=303628 sysload=0.31 cputime=84.581 memavail=7292040 print_time=1864.376 buffer_time=2.105 print_stall=0 extruder: target=240 temp=240.3 pwm=0.374
Stats 790331.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1554131 bytes_read=600636 bytes_retransmit=9 bytes_invalid=0 send_seq=38111 receive_seq=38111 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992982 heater_bed: target=80 temp=80.0 pwm=0.520 sd_pos=305402 sysload=0.31 cputime=84.666 memavail=7292040 print_time=1865.429 buffer_time=2.157 print_stall=0 extruder: target=240 temp=240.1 pwm=0.509
Stats 790332.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1558008 bytes_read=601303 bytes_retransmit=9 bytes_invalid=0 send_seq=38183 receive_seq=38183 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992974 heater_bed: target=80 temp=80.0 pwm=0.526 sd_pos=307234 sysload=0.31 cputime=84.751 memavail=7292044 print_time=1866.482 buffer_time=2.210 print_stall=0 extruder: target=240 temp=240.2 pwm=0.446
Stats 790333.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1561131 bytes_read=601892 bytes_retransmit=9 bytes_invalid=0 send_seq=38242 receive_seq=38242 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992972 heater_bed: target=80 temp=80.0 pwm=0.531 sd_pos=308495 sysload=0.29 cputime=84.836 memavail=7292044 print_time=1867.315 buffer_time=2.042 print_stall=0 extruder: target=240 temp=239.9 pwm=0.508
Stats 790334.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1565100 bytes_read=602545 bytes_retransmit=9 bytes_invalid=0 send_seq=38317 receive_seq=38317 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992988 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=310324 sysload=0.29 cputime=84.928 memavail=7292044 print_time=1868.368 buffer_time=2.094 print_stall=0 extruder: target=240 temp=239.3 pwm=0.750
Stats 790335.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1568970 bytes_read=603217 bytes_retransmit=9 bytes_invalid=0 send_seq=38390 receive_seq=38390 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119992982 heater_bed: target=80 temp=80.0 pwm=0.510 sd_pos=312148 sysload=0.29 cputime=85.012 memavail=7292044 print_time=1869.421 buffer_time=2.146 print_stall=0 extruder: target=240 temp=240.0 pwm=0.418
Stats 790336.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1572678 bytes_read=603860 bytes_retransmit=9 bytes_invalid=0 send_seq=38463 receive_seq=38463 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=3 upcoming_bytes=0 freq=119992972 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=313913 sysload=0.29 cputime=85.102 memavail=7292044 print_time=1870.474 buffer_time=2.198 print_stall=0 extruder: target=240 temp=240.4 pwm=0.211
Stats 790337.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1576373 bytes_read=604483 bytes_retransmit=9 bytes_invalid=0 send_seq=38532 receive_seq=38532 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992968 heater_bed: target=80 temp=80.0 pwm=0.554 sd_pos=315338 sysload=0.29 cputime=85.196 memavail=7291596 print_time=1872.118 buffer_time=2.841 print_stall=0 extruder: target=240 temp=240.4 pwm=0.320
Stats 790338.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1577265 bytes_read=604941 bytes_retransmit=9 bytes_invalid=0 send_seq=38559 receive_seq=38559 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992962 heater_bed: target=80 temp=80.0 pwm=0.349 sd_pos=315395 sysload=0.26 cputime=85.256 memavail=7291596 print_time=1873.047 buffer_time=2.768 print_stall=0 extruder: target=240 temp=239.7 pwm=0.696
Stats 790339.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1578677 bytes_read=605399 bytes_retransmit=9 bytes_invalid=0 send_seq=38595 receive_seq=38595 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992954 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=315627 sysload=0.26 cputime=85.324 memavail=7291596 print_time=1874.745 buffer_time=3.465 print_stall=0 extruder: target=240 temp=240.4 pwm=0.377
Stats 790340.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1578872 bytes_read=605752 bytes_retransmit=9 bytes_invalid=0 send_seq=38607 receive_seq=38607 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992952 heater_bed: target=80 temp=80.0 pwm=0.272 sd_pos=315627 sysload=0.26 cputime=85.390 memavail=7294592 print_time=1874.745 buffer_time=2.465 print_stall=0 extruder: target=240 temp=239.5 pwm=0.748
Stats 790341.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1579356 bytes_read=606139 bytes_retransmit=9 bytes_invalid=0 send_seq=38626 receive_seq=38626 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992940 heater_bed: target=80 temp=80.0 pwm=0.521 sd_pos=315656 sysload=0.26 cputime=85.444 memavail=7294592 print_time=1876.269 buffer_time=2.987 print_stall=0 extruder: target=240 temp=239.7 pwm=0.559
Stats 790342.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1579643 bytes_read=606502 bytes_retransmit=9 bytes_invalid=0 send_seq=38643 receive_seq=38643 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992932 heater_bed: target=80 temp=80.0 pwm=0.573 sd_pos=315683 sysload=0.26 cputime=85.503 memavail=7294308 print_time=1877.197 buffer_time=2.915 print_stall=0 extruder: target=240 temp=239.9 pwm=0.500
Stats 790343.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1580165 bytes_read=606890 bytes_retransmit=9 bytes_invalid=0 send_seq=38659 receive_seq=38659 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119992932 heater_bed: target=80 temp=80.0 pwm=0.540 sd_pos=315683 sysload=0.24 cputime=85.567 memavail=7294368 print_time=1877.766 buffer_time=2.484 print_stall=0 extruder: target=240 temp=240.1 pwm=0.417
Stats 790344.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1580813 bytes_read=607282 bytes_retransmit=9 bytes_invalid=0 send_seq=38679 receive_seq=38679 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992931 heater_bed: target=80 temp=80.0 pwm=0.346 sd_pos=315683 sysload=0.24 cputime=85.617 memavail=7294368 print_time=1878.821 buffer_time=2.538 print_stall=0 extruder: target=240 temp=240.1 pwm=0.531
Stats 790345.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1581405 bytes_read=607665 bytes_retransmit=9 bytes_invalid=0 send_seq=38700 receive_seq=38700 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992922 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=315827 sysload=0.24 cputime=85.672 memavail=7294368 print_time=1880.397 buffer_time=3.114 print_stall=0 extruder: target=240 temp=240.4 pwm=0.446
Stats 790346.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1581600 bytes_read=608018 bytes_retransmit=9 bytes_invalid=0 send_seq=38712 receive_seq=38712 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992919 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=315827 sysload=0.24 cputime=85.725 memavail=7294368 print_time=1880.397 buffer_time=2.114 print_stall=0 extruder: target=240 temp=240.4 pwm=0.438
Stats 790347.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1582590 bytes_read=608440 bytes_retransmit=9 bytes_invalid=0 send_seq=38738 receive_seq=38738 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992916 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=316000 sysload=0.24 cputime=85.798 memavail=7294368 print_time=1881.401 buffer_time=2.116 print_stall=0 extruder: target=240 temp=240.2 pwm=0.490
Stats 790348.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=1583224 bytes_read=608833 bytes_retransmit=9 bytes_invalid=0 send_seq=38758 receive_seq=38758 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=316087 sysload=0.22 cputime=85.870 memavail=7293640 print_time=1882.342 buffer_time=2.056 print_stall=0 extruder: target=240 temp=239.5 pwm=0.724
Stats 790349.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=1585021 bytes_read=609311 bytes_retransmit=9 bytes_invalid=0 send_seq=38795 receive_seq=38795 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992913 heater_bed: target=80 temp=80.1 pwm=0.372 sd_pos=316461 sysload=0.22 cputime=85.939 memavail=7293640 print_time=1883.673 buffer_time=2.387 print_stall=0 extruder: target=240 temp=239.5 pwm=0.738
Stats 790350.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=1585597 bytes_read=609719 bytes_retransmit=9 bytes_invalid=0 send_seq=38816 receive_seq=38816 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992910 heater_bed: target=80 temp=80.0 pwm=0.601 sd_pos=316518 sysload=0.22 cputime=85.999 memavail=7293640 print_time=1884.434 buffer_time=2.147 print_stall=0 extruder: target=240 temp=240.0 pwm=0.505
Stats 790351.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=1587034 bytes_read=610162 bytes_retransmit=9 bytes_invalid=0 send_seq=38849 receive_seq=38849 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992938 heater_bed: target=80 temp=80.0 pwm=0.572 sd_pos=316721 sysload=0.22 cputime=86.061 memavail=7293640 print_time=1886.174 buffer_time=2.887 print_stall=0 extruder: target=240 temp=240.4 pwm=0.331
Stats 790352.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=1587501 bytes_read=610550 bytes_retransmit=9 bytes_invalid=0 send_seq=38868 receive_seq=38868 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992935 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=316749 sysload=0.22 cputime=86.110 memavail=7296172 print_time=1887.696 buffer_time=3.409 print_stall=0 extruder: target=240 temp=239.8 pwm=0.620
Stats 790353.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1587711 bytes_read=610932 bytes_retransmit=9 bytes_invalid=0 send_seq=38883 receive_seq=38883 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992928 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=316749 sysload=0.20 cputime=86.166 memavail=7296172 print_time=1887.696 buffer_time=2.408 print_stall=0 extruder: target=240 temp=240.0 pwm=0.546
Stats 790354.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1588033 bytes_read=611290 bytes_retransmit=9 bytes_invalid=0 send_seq=38899 receive_seq=38899 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992922 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=316777 sysload=0.20 cputime=86.223 memavail=7296172 print_time=1888.642 buffer_time=2.353 print_stall=0 extruder: target=240 temp=240.0 pwm=0.481
Stats 790355.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1589016 bytes_read=611718 bytes_retransmit=9 bytes_invalid=0 send_seq=38926 receive_seq=38926 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992929 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=316777 sysload=0.20 cputime=86.277 memavail=7296172 print_time=1889.707 buffer_time=2.418 print_stall=0 extruder: target=240 temp=239.7 pwm=0.615
Stats 790356.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1589669 bytes_read=612120 bytes_retransmit=9 bytes_invalid=0 send_seq=38948 receive_seq=38948 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992926 heater_bed: target=80 temp=80.0 pwm=0.535 sd_pos=316922 sysload=0.20 cputime=86.336 memavail=7296172 print_time=1891.900 buffer_time=3.611 print_stall=0 extruder: target=240 temp=239.9 pwm=0.506
Stats 790357.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1589912 bytes_read=612473 bytes_retransmit=9 bytes_invalid=0 send_seq=38963 receive_seq=38963 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992922 heater_bed: target=80 temp=80.0 pwm=0.556 sd_pos=316922 sysload=0.20 cputime=86.385 memavail=7296172 print_time=1891.900 buffer_time=2.610 print_stall=0 extruder: target=240 temp=240.1 pwm=0.427
Stats 790358.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1590692 bytes_read=612901 bytes_retransmit=9 bytes_invalid=0 send_seq=38987 receive_seq=38987 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992918 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=317094 sysload=0.27 cputime=86.445 memavail=7296172 print_time=1892.319 buffer_time=2.029 print_stall=0 extruder: target=240 temp=240.6 pwm=0.235
Stats 790359.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1591298 bytes_read=613293 bytes_retransmit=9 bytes_invalid=0 send_seq=39007 receive_seq=39007 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992915 heater_bed: target=80 temp=80.0 pwm=0.449 sd_pos=317151 sysload=0.27 cputime=86.505 memavail=7296172 print_time=1893.782 buffer_time=2.492 print_stall=0 extruder: target=240 temp=240.0 pwm=0.568
Stats 790360.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1592668 bytes_read=613741 bytes_retransmit=9 bytes_invalid=0 send_seq=39041 receive_seq=39041 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992931 heater_bed: target=80 temp=80.1 pwm=0.250 sd_pos=317267 sysload=0.27 cputime=86.568 memavail=7296172 print_time=1894.853 buffer_time=2.562 print_stall=0 extruder: target=240 temp=239.8 pwm=0.622
Stats 790361.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1595125 bytes_read=614294 bytes_retransmit=9 bytes_invalid=0 send_seq=39093 receive_seq=39093 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992924 heater_bed: target=80 temp=80.0 pwm=0.510 sd_pos=317637 sysload=0.27 cputime=86.637 memavail=7296172 print_time=1895.545 buffer_time=2.252 print_stall=0 extruder: target=240 temp=240.3 pwm=0.345
Stats 790362.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1598680 bytes_read=614936 bytes_retransmit=9 bytes_invalid=0 send_seq=39163 receive_seq=39163 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992924 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=318667 sysload=0.27 cputime=86.717 memavail=7295920 print_time=1896.444 buffer_time=2.151 print_stall=0 extruder: target=240 temp=239.8 pwm=0.653
Stats 790363.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1603147 bytes_read=615650 bytes_retransmit=9 bytes_invalid=0 send_seq=39247 receive_seq=39247 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992919 heater_bed: target=80 temp=80.0 pwm=0.524 sd_pos=319330 sysload=0.25 cputime=86.790 memavail=7295920 print_time=1897.708 buffer_time=2.414 print_stall=0 extruder: target=240 temp=240.6 pwm=0.255
Stats 790364.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1605775 bytes_read=616202 bytes_retransmit=9 bytes_invalid=0 send_seq=39299 receive_seq=39299 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992917 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=319648 sysload=0.25 cputime=86.855 memavail=7295920 print_time=1898.385 buffer_time=2.091 print_stall=0 extruder: target=240 temp=240.1 pwm=0.508
Stats 790365.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1609394 bytes_read=616825 bytes_retransmit=9 bytes_invalid=0 send_seq=39367 receive_seq=39367 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992910 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=320247 sysload=0.25 cputime=86.922 memavail=7295920 print_time=1899.498 buffer_time=2.203 print_stall=0 extruder: target=240 temp=239.7 pwm=0.665
Stats 790366.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1612629 bytes_read=617411 bytes_retransmit=9 bytes_invalid=0 send_seq=39430 receive_seq=39430 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992910 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=320848 sysload=0.25 cputime=86.994 memavail=7295920 print_time=1900.353 buffer_time=2.058 print_stall=0 extruder: target=240 temp=239.8 pwm=0.572
Stats 790367.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1616666 bytes_read=618084 bytes_retransmit=9 bytes_invalid=0 send_seq=39506 receive_seq=39506 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119992908 heater_bed: target=80 temp=80.1 pwm=0.377 sd_pos=322316 sysload=0.25 cputime=87.079 memavail=7295920 print_time=1901.497 buffer_time=2.201 print_stall=0 extruder: target=240 temp=240.1 pwm=0.424
Stats 790368.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1619651 bytes_read=618682 bytes_retransmit=9 bytes_invalid=0 send_seq=39564 receive_seq=39564 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992907 heater_bed: target=80 temp=80.0 pwm=0.501 sd_pos=323318 sysload=0.23 cputime=87.159 memavail=7295920 print_time=1902.313 buffer_time=2.016 print_stall=0 extruder: target=240 temp=240.2 pwm=0.474
Stats 790369.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1624141 bytes_read=619380 bytes_retransmit=9 bytes_invalid=0 send_seq=39648 receive_seq=39648 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.0 pwm=0.558 sd_pos=324166 sysload=0.23 cputime=87.242 memavail=7295920 print_time=1903.445 buffer_time=2.147 print_stall=0 extruder: target=240 temp=240.4 pwm=0.400
Stats 790370.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1627636 bytes_read=620003 bytes_retransmit=9 bytes_invalid=0 send_seq=39714 receive_seq=39714 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992907 heater_bed: target=80 temp=80.0 pwm=0.537 sd_pos=324931 sysload=0.23 cputime=87.316 memavail=7295920 print_time=1904.322 buffer_time=2.024 print_stall=0 extruder: target=240 temp=240.0 pwm=0.620
Stats 790371.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1632133 bytes_read=620710 bytes_retransmit=9 bytes_invalid=0 send_seq=39797 receive_seq=39797 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992908 heater_bed: target=80 temp=80.1 pwm=0.391 sd_pos=325933 sysload=0.23 cputime=87.402 memavail=7295920 print_time=1905.492 buffer_time=2.193 print_stall=0 extruder: target=240 temp=239.9 pwm=0.591
Stats 790372.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1636145 bytes_read=621363 bytes_retransmit=9 bytes_invalid=0 send_seq=39872 receive_seq=39872 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992908 heater_bed: target=80 temp=80.1 pwm=0.391 sd_pos=326816 sysload=0.23 cputime=87.484 memavail=7295424 print_time=1906.492 buffer_time=2.192 print_stall=0 extruder: target=240 temp=240.0 pwm=0.580
Stats 790373.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1639258 bytes_read=621977 bytes_retransmit=9 bytes_invalid=0 send_seq=39933 receive_seq=39933 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992936 heater_bed: target=80 temp=80.1 pwm=0.480 sd_pos=327952 sysload=0.21 cputime=87.563 memavail=7295424 print_time=1907.333 buffer_time=2.033 print_stall=0 extruder: target=240 temp=240.2 pwm=0.437
Stats 790374.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1643606 bytes_read=622674 bytes_retransmit=9 bytes_invalid=0 send_seq=40014 receive_seq=40014 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992932 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=329511 sysload=0.21 cputime=87.649 memavail=7295424 print_time=1908.482 buffer_time=2.182 print_stall=0 extruder: target=240 temp=240.0 pwm=0.550
Stats 790375.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1647049 bytes_read=623272 bytes_retransmit=9 bytes_invalid=0 send_seq=40078 receive_seq=40078 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992928 heater_bed: target=80 temp=80.0 pwm=0.558 sd_pos=330716 sysload=0.21 cputime=87.729 memavail=7295424 print_time=1909.344 buffer_time=2.042 print_stall=0 extruder: target=240 temp=240.0 pwm=0.577
Stats 790376.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1651595 bytes_read=623990 bytes_retransmit=9 bytes_invalid=0 send_seq=40163 receive_seq=40163 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119992925 heater_bed: target=80 temp=80.1 pwm=0.493 sd_pos=332287 sysload=0.21 cputime=87.809 memavail=7295424 print_time=1910.499 buffer_time=2.197 print_stall=0 extruder: target=240 temp=240.0 pwm=0.521
Stats 790377.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1654907 bytes_read=624607 bytes_retransmit=9 bytes_invalid=0 send_seq=40228 receive_seq=40228 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992934 heater_bed: target=80 temp=80.1 pwm=0.402 sd_pos=333469 sysload=0.21 cputime=87.879 memavail=7295424 print_time=1911.340 buffer_time=2.037 print_stall=0 extruder: target=240 temp=240.4 pwm=0.278
Stats 790378.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1659272 bytes_read=625306 bytes_retransmit=9 bytes_invalid=0 send_seq=40309 receive_seq=40309 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992984 heater_bed: target=80 temp=80.1 pwm=0.439 sd_pos=335041 sysload=0.19 cputime=87.945 memavail=7295424 print_time=1912.489 buffer_time=2.185 print_stall=0 extruder: target=240 temp=240.0 pwm=0.529
Stats 790379.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1662615 bytes_read=625909 bytes_retransmit=9 bytes_invalid=0 send_seq=40371 receive_seq=40371 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992981 heater_bed: target=80 temp=80.0 pwm=0.483 sd_pos=336212 sysload=0.19 cputime=87.999 memavail=7295424 print_time=1913.351 buffer_time=2.047 print_stall=0 extruder: target=240 temp=240.2 pwm=0.345
Stats 790380.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1666677 bytes_read=626596 bytes_retransmit=9 bytes_invalid=0 send_seq=40450 receive_seq=40450 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992968 heater_bed: target=80 temp=80.0 pwm=0.525 sd_pos=337594 sysload=0.19 cputime=88.050 memavail=7295424 print_time=1914.504 buffer_time=2.200 print_stall=0 extruder: target=240 temp=239.8 pwm=0.552
Stats 790381.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1669967 bytes_read=627189 bytes_retransmit=9 bytes_invalid=0 send_seq=40513 receive_seq=40513 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992960 heater_bed: target=80 temp=80.1 pwm=0.366 sd_pos=338759 sysload=0.19 cputime=88.095 memavail=7295424 print_time=1915.366 buffer_time=2.061 print_stall=0 extruder: target=240 temp=240.2 pwm=0.322
Stats 790382.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1674395 bytes_read=627892 bytes_retransmit=9 bytes_invalid=0 send_seq=40595 receive_seq=40595 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992954 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=340337 sysload=0.19 cputime=88.173 memavail=7294924 print_time=1916.515 buffer_time=2.210 print_stall=0 extruder: target=240 temp=240.0 pwm=0.479
Stats 790383.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1677650 bytes_read=628510 bytes_retransmit=9 bytes_invalid=0 send_seq=40657 receive_seq=40657 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119992955 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=341545 sysload=0.17 cputime=88.246 memavail=7294928 print_time=1917.377 buffer_time=2.071 print_stall=0 extruder: target=240 temp=239.9 pwm=0.491
Stats 790384.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1682159 bytes_read=629208 bytes_retransmit=9 bytes_invalid=0 send_seq=40741 receive_seq=40741 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992953 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=343043 sysload=0.17 cputime=88.323 memavail=7294928 print_time=1918.521 buffer_time=2.215 print_stall=0 extruder: target=240 temp=239.8 pwm=0.551
Stats 790385.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1685491 bytes_read=629826 bytes_retransmit=9 bytes_invalid=0 send_seq=40806 receive_seq=40806 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992946 heater_bed: target=80 temp=79.9 pwm=0.579 sd_pos=344266 sysload=0.17 cputime=88.401 memavail=7294928 print_time=1919.383 buffer_time=2.076 print_stall=0 extruder: target=240 temp=240.5 pwm=0.267
Stats 790386.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1689810 bytes_read=630518 bytes_retransmit=9 bytes_invalid=0 send_seq=40886 receive_seq=40886 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992946 heater_bed: target=80 temp=80.0 pwm=0.355 sd_pos=345845 sysload=0.17 cputime=88.484 memavail=7294928 print_time=1920.532 buffer_time=2.225 print_stall=0 extruder: target=240 temp=239.8 pwm=0.521
Stats 790387.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1693089 bytes_read=631111 bytes_retransmit=9 bytes_invalid=0 send_seq=40949 receive_seq=40949 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992946 heater_bed: target=80 temp=79.9 pwm=0.542 sd_pos=347016 sysload=0.17 cputime=88.559 memavail=7294928 print_time=1921.393 buffer_time=2.085 print_stall=0 extruder: target=240 temp=240.1 pwm=0.443
Stats 790388.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1697051 bytes_read=631790 bytes_retransmit=9 bytes_invalid=0 send_seq=41023 receive_seq=41023 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992942 heater_bed: target=80 temp=79.9 pwm=0.544 sd_pos=348335 sysload=0.16 cputime=88.640 memavail=7294928 print_time=1923.084 buffer_time=2.775 print_stall=0 extruder: target=240 temp=239.9 pwm=0.532
Stats 790389.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1697890 bytes_read=632197 bytes_retransmit=9 bytes_invalid=0 send_seq=41046 receive_seq=41046 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992938 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=348392 sysload=0.16 cputime=88.690 memavail=7294704 print_time=1924.014 buffer_time=2.704 print_stall=0 extruder: target=240 temp=240.0 pwm=0.381
Stats 790390.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1699266 bytes_read=632645 bytes_retransmit=9 bytes_invalid=0 send_seq=41080 receive_seq=41080 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992935 heater_bed: target=80 temp=80.0 pwm=0.369 sd_pos=348648 sysload=0.16 cputime=88.752 memavail=7294704 print_time=1925.712 buffer_time=3.402 print_stall=0 extruder: target=240 temp=239.3 pwm=0.798
Stats 790391.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1699466 bytes_read=633003 bytes_retransmit=9 bytes_invalid=0 send_seq=41093 receive_seq=41093 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992933 heater_bed: target=80 temp=80.0 pwm=0.132 sd_pos=348648 sysload=0.16 cputime=88.802 memavail=7294704 print_time=1925.712 buffer_time=2.401 print_stall=0 extruder: target=240 temp=240.0 pwm=0.418
Stats 790392.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1700014 bytes_read=633410 bytes_retransmit=9 bytes_invalid=0 send_seq=41116 receive_seq=41116 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992928 heater_bed: target=80 temp=80.0 pwm=0.359 sd_pos=348677 sysload=0.16 cputime=88.858 memavail=7294704 print_time=1927.235 buffer_time=2.924 print_stall=0 extruder: target=240 temp=240.5 pwm=0.225
Stats 790393.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1700280 bytes_read=633778 bytes_retransmit=9 bytes_invalid=0 send_seq=41131 receive_seq=41131 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992925 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=348704 sysload=0.15 cputime=88.901 memavail=7294708 print_time=1928.163 buffer_time=2.851 print_stall=0 extruder: target=240 temp=240.5 pwm=0.334
Stats 790394.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1700821 bytes_read=634171 bytes_retransmit=9 bytes_invalid=0 send_seq=41151 receive_seq=41151 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119992921 heater_bed: target=80 temp=80.0 pwm=0.497 sd_pos=348704 sysload=0.15 cputime=88.949 memavail=7294708 print_time=1928.732 buffer_time=2.420 print_stall=0 extruder: target=240 temp=240.8 pwm=0.267
Stats 790395.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1701480 bytes_read=634568 bytes_retransmit=9 bytes_invalid=0 send_seq=41172 receive_seq=41172 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992920 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=348704 sysload=0.15 cputime=89.004 memavail=7294708 print_time=1929.787 buffer_time=2.474 print_stall=0 extruder: target=240 temp=239.6 pwm=0.747
Stats 790396.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1702018 bytes_read=634936 bytes_retransmit=9 bytes_invalid=0 send_seq=41190 receive_seq=41190 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992955 heater_bed: target=80 temp=80.0 pwm=0.508 sd_pos=348848 sysload=0.15 cputime=89.064 memavail=7294484 print_time=1931.364 buffer_time=3.049 print_stall=0 extruder: target=240 temp=239.2 pwm=0.844
Stats 790397.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1702218 bytes_read=635294 bytes_retransmit=9 bytes_invalid=0 send_seq=41203 receive_seq=41203 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992950 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=348848 sysload=0.15 cputime=89.113 memavail=7294260 print_time=1931.364 buffer_time=2.049 print_stall=0 extruder: target=240 temp=240.0 pwm=0.386
Stats 790398.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1703229 bytes_read=635741 bytes_retransmit=9 bytes_invalid=0 send_seq=41231 receive_seq=41231 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992944 heater_bed: target=80 temp=80.0 pwm=0.614 sd_pos=349021 sysload=0.14 cputime=89.179 memavail=7294260 print_time=1932.368 buffer_time=2.052 print_stall=0 extruder: target=240 temp=240.4 pwm=0.263
Stats 790399.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1704680 bytes_read=636194 bytes_retransmit=9 bytes_invalid=0 send_seq=41266 receive_seq=41266 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992940 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=349279 sysload=0.14 cputime=89.245 memavail=7294036 print_time=1934.244 buffer_time=2.927 print_stall=0 extruder: target=240 temp=240.4 pwm=0.381
Stats 790400.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1705695 bytes_read=636614 bytes_retransmit=9 bytes_invalid=0 send_seq=41292 receive_seq=41292 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992971 heater_bed: target=80 temp=80.1 pwm=0.427 sd_pos=349482 sysload=0.14 cputime=89.304 memavail=7294036 print_time=1934.640 buffer_time=2.322 print_stall=0 extruder: target=240 temp=240.4 pwm=0.417
Stats 790401.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1706291 bytes_read=637013 bytes_retransmit=9 bytes_invalid=0 send_seq=41315 receive_seq=41315 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992968 heater_bed: target=80 temp=80.1 pwm=0.380 sd_pos=349539 sysload=0.14 cputime=89.370 memavail=7294036 print_time=1935.401 buffer_time=2.082 print_stall=0 extruder: target=240 temp=240.3 pwm=0.487
Stats 790402.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1707724 bytes_read=637450 bytes_retransmit=9 bytes_invalid=0 send_seq=41348 receive_seq=41348 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992960 heater_bed: target=80 temp=80.0 pwm=0.497 sd_pos=349742 sysload=0.14 cputime=89.440 memavail=7294184 print_time=1937.140 buffer_time=2.821 print_stall=0 extruder: target=240 temp=240.1 pwm=0.523
Stats 790403.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1708110 bytes_read=637838 bytes_retransmit=9 bytes_invalid=0 send_seq=41364 receive_seq=41364 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992954 heater_bed: target=80 temp=80.0 pwm=0.566 sd_pos=349770 sysload=0.28 cputime=89.506 memavail=7294288 print_time=1938.663 buffer_time=3.343 print_stall=0 extruder: target=240 temp=239.5 pwm=0.735
Stats 790404.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1708392 bytes_read=638210 bytes_retransmit=9 bytes_invalid=0 send_seq=41380 receive_seq=41380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992957 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=349770 sysload=0.28 cputime=89.565 memavail=7294288 print_time=1938.663 buffer_time=2.342 print_stall=0 extruder: target=240 temp=239.8 pwm=0.570
Stats 790405.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1708682 bytes_read=638558 bytes_retransmit=9 bytes_invalid=0 send_seq=41394 receive_seq=41394 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992999 heater_bed: target=80 temp=80.0 pwm=0.530 sd_pos=349798 sysload=0.28 cputime=89.630 memavail=7294288 print_time=1939.609 buffer_time=2.286 print_stall=0 extruder: target=240 temp=240.5 pwm=0.249
Stats 790406.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1709576 bytes_read=638971 bytes_retransmit=9 bytes_invalid=0 send_seq=41418 receive_seq=41418 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992991 heater_bed: target=80 temp=80.0 pwm=0.365 sd_pos=349798 sysload=0.28 cputime=89.691 memavail=7294288 print_time=1940.674 buffer_time=2.351 print_stall=0 extruder: target=240 temp=240.3 pwm=0.434
Stats 790407.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1710264 bytes_read=639368 bytes_retransmit=9 bytes_invalid=0 send_seq=41439 receive_seq=41439 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992987 heater_bed: target=80 temp=80.0 pwm=0.310 sd_pos=349943 sysload=0.28 cputime=89.761 memavail=7294332 print_time=1942.867 buffer_time=3.542 print_stall=0 extruder: target=240 temp=240.2 pwm=0.406
Stats 790408.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1710480 bytes_read=639731 bytes_retransmit=9 bytes_invalid=0 send_seq=41453 receive_seq=41453 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992982 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=349943 sysload=0.26 cputime=89.819 memavail=7294516 print_time=1942.867 buffer_time=2.541 print_stall=0 extruder: target=240 temp=239.6 pwm=0.681
Stats 790409.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1711318 bytes_read=640134 bytes_retransmit=9 bytes_invalid=0 send_seq=41475 receive_seq=41475 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119993004 heater_bed: target=80 temp=79.9 pwm=0.509 sd_pos=350115 sysload=0.26 cputime=89.881 memavail=7294516 print_time=1943.583 buffer_time=2.257 print_stall=0 extruder: target=240 temp=239.8 pwm=0.546
Stats 790410.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1711802 bytes_read=640516 bytes_retransmit=9 bytes_invalid=0 send_seq=41493 receive_seq=41493 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993002 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=350172 sysload=0.26 cputime=89.952 memavail=7294292 print_time=1944.749 buffer_time=2.423 print_stall=0 extruder: target=240 temp=239.8 pwm=0.550
Stats 790411.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1713111 bytes_read=640944 bytes_retransmit=9 bytes_invalid=0 send_seq=41523 receive_seq=41523 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992992 heater_bed: target=80 temp=80.0 pwm=0.259 sd_pos=350288 sysload=0.26 cputime=90.022 memavail=7294292 print_time=1945.820 buffer_time=2.493 print_stall=0 extruder: target=240 temp=240.4 pwm=0.280
Stats 790412.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1715495 bytes_read=641498 bytes_retransmit=9 bytes_invalid=0 send_seq=41573 receive_seq=41573 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992979 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=350796 sysload=0.26 cputime=90.097 memavail=7294040 print_time=1946.453 buffer_time=2.126 print_stall=0 extruder: target=240 temp=240.3 pwm=0.354
Stats 790413.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=1720111 bytes_read=642245 bytes_retransmit=9 bytes_invalid=0 send_seq=41661 receive_seq=41661 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992971 heater_bed: target=80 temp=80.0 pwm=0.525 sd_pos=351813 sysload=0.24 cputime=90.189 memavail=7294040 print_time=1947.596 buffer_time=2.268 print_stall=0 extruder: target=240 temp=240.0 pwm=0.494
Stats 790414.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=1723876 bytes_read=642868 bytes_retransmit=9 bytes_invalid=0 send_seq=41730 receive_seq=41730 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992966 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=352504 sysload=0.24 cputime=90.259 memavail=7294040 print_time=1948.432 buffer_time=2.103 print_stall=0 extruder: target=240 temp=239.8 pwm=0.600
Stats 790415.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=1728869 bytes_read=643601 bytes_retransmit=9 bytes_invalid=0 send_seq=41818 receive_seq=41818 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=1185 freq=119992964 heater_bed: target=80 temp=80.0 pwm=0.349 sd_pos=353328 sysload=0.24 cputime=90.363 memavail=7294040 print_time=1949.944 buffer_time=2.615 print_stall=0 extruder: target=240 temp=240.1 pwm=0.448
Stats 790416.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=1732456 bytes_read=644213 bytes_retransmit=9 bytes_invalid=0 send_seq=41882 receive_seq=41882 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992962 heater_bed: target=80 temp=80.1 pwm=0.342 sd_pos=353531 sysload=0.24 cputime=90.443 memavail=7294040 print_time=1950.521 buffer_time=2.190 print_stall=0 extruder: target=240 temp=239.8 pwm=0.612
Stats 790417.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=1736671 bytes_read=644871 bytes_retransmit=9 bytes_invalid=0 send_seq=41958 receive_seq=41958 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993016 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=354125 sysload=0.24 cputime=90.535 memavail=7294040 print_time=1951.454 buffer_time=2.123 print_stall=0 extruder: target=240 temp=239.6 pwm=0.683
Stats 790418.1: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1741285 bytes_read=645600 bytes_retransmit=9 bytes_invalid=0 send_seq=42042 receive_seq=42042 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=7 freq=119993006 heater_bed: target=80 temp=80.0 pwm=0.537 sd_pos=355000 sysload=0.22 cputime=90.624 memavail=7294040 print_time=1952.614 buffer_time=2.283 print_stall=0 extruder: target=240 temp=240.6 pwm=0.237
Stats 790419.1: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1744908 bytes_read=646232 bytes_retransmit=9 bytes_invalid=0 send_seq=42110 receive_seq=42110 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992996 heater_bed: target=80 temp=80.0 pwm=0.518 sd_pos=356006 sysload=0.22 cputime=90.703 memavail=7294044 print_time=1953.534 buffer_time=2.202 print_stall=0 extruder: target=240 temp=240.5 pwm=0.392
Stats 790420.1: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1748891 bytes_read=646875 bytes_retransmit=9 bytes_invalid=0 send_seq=42183 receive_seq=42183 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992987 heater_bed: target=80 temp=80.1 pwm=0.392 sd_pos=357025 sysload=0.22 cputime=90.776 memavail=7294044 print_time=1954.479 buffer_time=2.146 print_stall=0 extruder: target=240 temp=240.4 pwm=0.483
Stats 790421.1: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1752725 bytes_read=647533 bytes_retransmit=9 bytes_invalid=0 send_seq=42256 receive_seq=42256 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992982 heater_bed: target=80 temp=80.0 pwm=0.552 sd_pos=358016 sysload=0.22 cputime=90.860 memavail=7294044 print_time=1955.523 buffer_time=2.190 print_stall=0 extruder: target=240 temp=239.9 pwm=0.674
Stats 790422.1: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1756596 bytes_read=648190 bytes_retransmit=9 bytes_invalid=0 send_seq=42329 receive_seq=42329 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992976 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=359020 sysload=0.22 cputime=90.948 memavail=7293792 print_time=1956.443 buffer_time=2.108 print_stall=0 extruder: target=240 temp=240.0 pwm=0.531
Stats 790423.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1760281 bytes_read=648834 bytes_retransmit=9 bytes_invalid=0 send_seq=42399 receive_seq=42399 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992969 heater_bed: target=80 temp=80.0 pwm=0.564 sd_pos=360003 sysload=0.28 cputime=91.024 memavail=7293792 print_time=1957.352 buffer_time=2.016 print_stall=0 extruder: target=240 temp=240.1 pwm=0.417
Stats 790424.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1765118 bytes_read=649572 bytes_retransmit=9 bytes_invalid=0 send_seq=42488 receive_seq=42488 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119992959 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=361182 sysload=0.28 cputime=91.105 memavail=7293792 print_time=1958.565 buffer_time=2.229 print_stall=0 extruder: target=240 temp=240.4 pwm=0.358
Stats 790425.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1769376 bytes_read=650264 bytes_retransmit=9 bytes_invalid=0 send_seq=42568 receive_seq=42568 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992960 heater_bed: target=80 temp=80.1 pwm=0.336 sd_pos=362133 sysload=0.28 cputime=91.178 memavail=7293792 print_time=1959.512 buffer_time=2.175 print_stall=0 extruder: target=240 temp=240.1 pwm=0.581
Stats 790426.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1772969 bytes_read=650872 bytes_retransmit=9 bytes_invalid=0 send_seq=42634 receive_seq=42634 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119993016 heater_bed: target=80 temp=80.1 pwm=0.509 sd_pos=362633 sysload=0.28 cputime=91.263 memavail=7293568 print_time=1960.465 buffer_time=2.127 print_stall=0 extruder: target=240 temp=239.8 pwm=0.683
Stats 790427.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1776857 bytes_read=651525 bytes_retransmit=9 bytes_invalid=0 send_seq=42706 receive_seq=42706 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993006 heater_bed: target=80 temp=80.1 pwm=0.317 sd_pos=363606 sysload=0.28 cputime=91.345 memavail=7293568 print_time=1961.345 buffer_time=2.006 print_stall=0 extruder: target=240 temp=239.9 pwm=0.496
Stats 790428.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1781688 bytes_read=652268 bytes_retransmit=9 bytes_invalid=0 send_seq=42793 receive_seq=42793 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=294 freq=119993002 heater_bed: target=80 temp=80.1 pwm=0.406 sd_pos=364877 sysload=0.34 cputime=91.432 memavail=7293568 print_time=1962.593 buffer_time=2.253 print_stall=0 extruder: target=240 temp=239.3 pwm=0.765
Stats 790429.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1785971 bytes_read=652931 bytes_retransmit=9 bytes_invalid=0 send_seq=42870 receive_seq=42870 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119993000 heater_bed: target=80 temp=80.1 pwm=0.457 sd_pos=365885 sysload=0.34 cputime=91.519 memavail=7293568 print_time=1963.529 buffer_time=2.188 print_stall=0 extruder: target=240 temp=240.0 pwm=0.422
Stats 790430.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1789878 bytes_read=653589 bytes_retransmit=9 bytes_invalid=0 send_seq=42943 receive_seq=42943 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993011 heater_bed: target=80 temp=80.2 pwm=0.288 sd_pos=366811 sysload=0.34 cputime=91.596 memavail=7293568 print_time=1964.443 buffer_time=2.102 print_stall=0 extruder: target=240 temp=240.2 pwm=0.385
Stats 790431.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1793830 bytes_read=654251 bytes_retransmit=9 bytes_invalid=0 send_seq=43017 receive_seq=43017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992998 heater_bed: target=80 temp=80.1 pwm=0.375 sd_pos=367820 sysload=0.34 cputime=91.682 memavail=7293568 print_time=1965.380 buffer_time=2.037 print_stall=0 extruder: target=240 temp=240.1 pwm=0.491
Stats 790432.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1798695 bytes_read=654964 bytes_retransmit=9 bytes_invalid=0 send_seq=43104 receive_seq=43104 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=143 freq=119992989 heater_bed: target=80 temp=80.1 pwm=0.483 sd_pos=369051 sysload=0.34 cputime=91.772 memavail=7292308 print_time=1966.599 buffer_time=2.256 print_stall=0 extruder: target=240 temp=239.7 pwm=0.675
Stats 790433.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1802761 bytes_read=655658 bytes_retransmit=9 bytes_invalid=0 send_seq=43181 receive_seq=43181 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992979 heater_bed: target=80 temp=80.1 pwm=0.477 sd_pos=370029 sysload=0.31 cputime=91.860 memavail=7292316 print_time=1967.527 buffer_time=2.183 print_stall=0 extruder: target=240 temp=239.8 pwm=0.547
Stats 790434.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1806681 bytes_read=656310 bytes_retransmit=9 bytes_invalid=0 send_seq=43253 receive_seq=43253 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992988 heater_bed: target=80 temp=80.1 pwm=0.382 sd_pos=370922 sysload=0.31 cputime=91.932 memavail=7292316 print_time=1968.449 buffer_time=2.105 print_stall=0 extruder: target=240 temp=239.4 pwm=0.680
Stats 790435.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1810612 bytes_read=656943 bytes_retransmit=9 bytes_invalid=0 send_seq=43324 receive_seq=43324 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992979 heater_bed: target=80 temp=80.2 pwm=0.325 sd_pos=371895 sysload=0.31 cputime=91.999 memavail=7292316 print_time=1969.377 buffer_time=2.032 print_stall=0 extruder: target=240 temp=239.8 pwm=0.454
Stats 790436.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1815613 bytes_read=657681 bytes_retransmit=9 bytes_invalid=0 send_seq=43414 receive_seq=43414 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=22 freq=119992971 heater_bed: target=80 temp=80.1 pwm=0.386 sd_pos=373122 sysload=0.31 cputime=92.085 memavail=7292092 print_time=1970.599 buffer_time=2.252 print_stall=0 extruder: target=240 temp=240.3 pwm=0.290
Stats 790437.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1819350 bytes_read=658315 bytes_retransmit=9 bytes_invalid=0 send_seq=43484 receive_seq=43484 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992963 heater_bed: target=80 temp=80.1 pwm=0.369 sd_pos=374011 sysload=0.31 cputime=92.165 memavail=7291800 print_time=1971.524 buffer_time=2.178 print_stall=0 extruder: target=240 temp=240.0 pwm=0.553
Stats 790438.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1823299 bytes_read=658964 bytes_retransmit=9 bytes_invalid=0 send_seq=43556 receive_seq=43556 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992957 heater_bed: target=80 temp=80.2 pwm=0.303 sd_pos=374998 sysload=0.29 cputime=92.234 memavail=7291800 print_time=1972.449 buffer_time=2.101 print_stall=0 extruder: target=240 temp=240.3 pwm=0.363
Stats 790439.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1827044 bytes_read=659607 bytes_retransmit=9 bytes_invalid=0 send_seq=43626 receive_seq=43626 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992983 heater_bed: target=80 temp=80.1 pwm=0.470 sd_pos=375889 sysload=0.29 cputime=92.303 memavail=7291800 print_time=1973.375 buffer_time=2.026 print_stall=0 extruder: target=240 temp=239.7 pwm=0.691
Stats 790440.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1832127 bytes_read=660354 bytes_retransmit=9 bytes_invalid=0 send_seq=43717 receive_seq=43717 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992971 heater_bed: target=80 temp=80.1 pwm=0.510 sd_pos=377196 sysload=0.29 cputime=92.386 memavail=7291800 print_time=1974.632 buffer_time=2.283 print_stall=0 extruder: target=240 temp=239.8 pwm=0.486
Stats 790441.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1835741 bytes_read=660977 bytes_retransmit=9 bytes_invalid=0 send_seq=43786 receive_seq=43786 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992960 heater_bed: target=80 temp=80.1 pwm=0.444 sd_pos=378088 sysload=0.29 cputime=92.446 memavail=7291800 print_time=1975.547 buffer_time=2.197 print_stall=0 extruder: target=240 temp=239.4 pwm=0.690
Stats 790442.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1839505 bytes_read=661625 bytes_retransmit=9 bytes_invalid=0 send_seq=43857 receive_seq=43857 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119993022 heater_bed: target=80 temp=80.0 pwm=0.622 sd_pos=379061 sysload=0.29 cputime=92.510 memavail=7291800 print_time=1976.483 buffer_time=2.133 print_stall=0 extruder: target=240 temp=239.9 pwm=0.484
Stats 790443.1: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1843117 bytes_read=662278 bytes_retransmit=9 bytes_invalid=0 send_seq=43926 receive_seq=43926 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993012 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=379954 sysload=0.27 cputime=92.575 memavail=7291804 print_time=1977.397 buffer_time=2.046 print_stall=0 extruder: target=240 temp=240.3 pwm=0.376
Stats 790444.1: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1847719 bytes_read=662976 bytes_retransmit=9 bytes_invalid=0 send_seq=44010 receive_seq=44010 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993006 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=381231 sysload=0.27 cputime=92.646 memavail=7291804 print_time=1978.630 buffer_time=2.279 print_stall=0 extruder: target=240 temp=240.5 pwm=0.303
Stats 790445.1: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1851169 bytes_read=663609 bytes_retransmit=9 bytes_invalid=0 send_seq=44078 receive_seq=44078 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992995 heater_bed: target=80 temp=79.9 pwm=0.629 sd_pos=382124 sysload=0.27 cputime=92.716 memavail=7291804 print_time=1979.552 buffer_time=2.201 print_stall=0 extruder: target=240 temp=239.7 pwm=0.740
Stats 790446.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1855190 bytes_read=664276 bytes_retransmit=9 bytes_invalid=0 send_seq=44153 receive_seq=44153 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992985 heater_bed: target=80 temp=79.9 pwm=0.540 sd_pos=383296 sysload=0.27 cputime=92.790 memavail=7291804 print_time=1980.595 buffer_time=2.243 print_stall=0 extruder: target=240 temp=239.8 pwm=0.588
Stats 790447.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1857017 bytes_read=664749 bytes_retransmit=9 bytes_invalid=0 send_seq=44192 receive_seq=44192 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992976 heater_bed: target=80 temp=79.9 pwm=0.549 sd_pos=383565 sysload=0.27 cputime=92.843 memavail=7291804 print_time=1981.647 buffer_time=2.294 print_stall=0 extruder: target=240 temp=239.6 pwm=0.588
Stats 790448.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1857870 bytes_read=665183 bytes_retransmit=9 bytes_invalid=0 send_seq=44217 receive_seq=44217 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992992 heater_bed: target=80 temp=79.9 pwm=0.375 sd_pos=383622 sysload=0.24 cputime=92.897 memavail=7291804 print_time=1982.576 buffer_time=2.222 print_stall=0 extruder: target=240 temp=239.9 pwm=0.487
Stats 790449.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1859263 bytes_read=665645 bytes_retransmit=9 bytes_invalid=0 send_seq=44251 receive_seq=44251 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992984 heater_bed: target=80 temp=79.9 pwm=0.371 sd_pos=383878 sysload=0.24 cputime=92.953 memavail=7291804 print_time=1984.274 buffer_time=2.920 print_stall=0 extruder: target=240 temp=240.5 pwm=0.271
Stats 790450.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1859737 bytes_read=666018 bytes_retransmit=9 bytes_invalid=0 send_seq=44270 receive_seq=44270 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992974 heater_bed: target=80 temp=79.9 pwm=0.448 sd_pos=383907 sysload=0.24 cputime=92.998 memavail=7291804 print_time=1985.797 buffer_time=3.442 print_stall=0 extruder: target=240 temp=240.2 pwm=0.474
Stats 790451.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1860011 bytes_read=666396 bytes_retransmit=9 bytes_invalid=0 send_seq=44287 receive_seq=44287 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992966 heater_bed: target=80 temp=79.9 pwm=0.372 sd_pos=383907 sysload=0.24 cputime=93.046 memavail=7291804 print_time=1985.797 buffer_time=2.442 print_stall=0 extruder: target=240 temp=239.9 pwm=0.623
Stats 790452.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1860328 bytes_read=666768 bytes_retransmit=9 bytes_invalid=0 send_seq=44303 receive_seq=44303 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992990 heater_bed: target=80 temp=80.0 pwm=0.344 sd_pos=383934 sysload=0.24 cputime=93.096 memavail=7291804 print_time=1986.725 buffer_time=2.369 print_stall=0 extruder: target=240 temp=239.5 pwm=0.769
Stats 790453.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1861191 bytes_read=667176 bytes_retransmit=9 bytes_invalid=0 send_seq=44326 receive_seq=44326 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992978 heater_bed: target=80 temp=79.9 pwm=0.529 sd_pos=383934 sysload=0.22 cputime=93.148 memavail=7291808 print_time=1987.755 buffer_time=2.398 print_stall=0 extruder: target=240 temp=239.5 pwm=0.736
Stats 790454.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1861868 bytes_read=667603 bytes_retransmit=9 bytes_invalid=0 send_seq=44350 receive_seq=44350 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992967 heater_bed: target=80 temp=79.9 pwm=0.423 sd_pos=384078 sysload=0.22 cputime=93.206 memavail=7291808 print_time=1989.926 buffer_time=3.569 print_stall=0 extruder: target=240 temp=240.4 pwm=0.326
Stats 790455.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1862092 bytes_read=667956 bytes_retransmit=9 bytes_invalid=0 send_seq=44365 receive_seq=44365 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992969 heater_bed: target=80 temp=79.9 pwm=0.423 sd_pos=384078 sysload=0.22 cputime=93.252 memavail=7291808 print_time=1989.926 buffer_time=2.568 print_stall=0 extruder: target=240 temp=240.1 pwm=0.492
Stats 790456.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1862939 bytes_read=668354 bytes_retransmit=9 bytes_invalid=0 send_seq=44389 receive_seq=44389 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992959 heater_bed: target=80 temp=79.9 pwm=0.554 sd_pos=384251 sysload=0.22 cputime=93.308 memavail=7291584 print_time=1990.633 buffer_time=2.274 print_stall=0 extruder: target=240 temp=240.1 pwm=0.471
Stats 790457.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1863440 bytes_read=668766 bytes_retransmit=9 bytes_invalid=0 send_seq=44410 receive_seq=44410 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119992989 heater_bed: target=80 temp=79.9 pwm=0.481 sd_pos=384308 sysload=0.22 cputime=93.380 memavail=7291584 print_time=1991.781 buffer_time=2.422 print_stall=0 extruder: target=240 temp=240.6 pwm=0.282
Stats 790458.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1864782 bytes_read=669229 bytes_retransmit=9 bytes_invalid=0 send_seq=44444 receive_seq=44444 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992978 heater_bed: target=80 temp=79.9 pwm=0.352 sd_pos=384509 sysload=0.29 cputime=93.440 memavail=7291584 print_time=1992.806 buffer_time=2.446 print_stall=0 extruder: target=240 temp=240.1 pwm=0.479
Stats 790459.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1866111 bytes_read=669662 bytes_retransmit=9 bytes_invalid=0 send_seq=44475 receive_seq=44475 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992968 heater_bed: target=80 temp=80.0 pwm=0.307 sd_pos=384769 sysload=0.29 cputime=93.507 memavail=7291584 print_time=1993.963 buffer_time=2.602 print_stall=0 extruder: target=240 temp=239.6 pwm=0.695
Stats 790460.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1867588 bytes_read=670144 bytes_retransmit=9 bytes_invalid=0 send_seq=44510 receive_seq=44510 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992957 heater_bed: target=80 temp=79.9 pwm=0.439 sd_pos=384972 sysload=0.29 cputime=93.608 memavail=7293596 print_time=1995.703 buffer_time=3.339 print_stall=0 extruder: target=240 temp=240.0 pwm=0.490
Stats 790461.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1867798 bytes_read=670497 bytes_retransmit=9 bytes_invalid=0 send_seq=44525 receive_seq=44525 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992945 heater_bed: target=80 temp=80.0 pwm=0.359 sd_pos=384972 sysload=0.29 cputime=93.659 memavail=7293596 print_time=1995.703 buffer_time=2.338 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 790462.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=1868213 bytes_read=670850 bytes_retransmit=9 bytes_invalid=0 send_seq=44540 receive_seq=44540 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992937 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=385000 sysload=0.29 cputime=93.705 memavail=7292868 print_time=1997.225 buffer_time=2.860 print_stall=0 extruder: target=240 temp=239.9 pwm=0.531
Stats 790463.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1868484 bytes_read=671252 bytes_retransmit=9 bytes_invalid=0 send_seq=44556 receive_seq=44556 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992925 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=385028 sysload=0.26 cputime=93.782 memavail=7292868 print_time=1998.171 buffer_time=2.805 print_stall=0 extruder: target=240 temp=240.0 pwm=0.508
Stats 790464.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1869126 bytes_read=671635 bytes_retransmit=9 bytes_invalid=0 send_seq=44577 receive_seq=44577 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992917 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=385028 sysload=0.26 cputime=93.838 memavail=7292868 print_time=1998.775 buffer_time=2.409 print_stall=0 extruder: target=240 temp=240.1 pwm=0.531
Stats 790465.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1869730 bytes_read=672008 bytes_retransmit=9 bytes_invalid=0 send_seq=44596 receive_seq=44596 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992906 heater_bed: target=80 temp=80.0 pwm=0.310 sd_pos=385028 sysload=0.26 cputime=93.883 memavail=7292868 print_time=1999.682 buffer_time=2.314 print_stall=0 extruder: target=240 temp=240.2 pwm=0.466
Stats 790466.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1870311 bytes_read=672420 bytes_retransmit=9 bytes_invalid=0 send_seq=44617 receive_seq=44617 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992900 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=385173 sysload=0.26 cputime=93.952 memavail=7292868 print_time=2001.429 buffer_time=3.060 print_stall=0 extruder: target=240 temp=240.1 pwm=0.466
Stats 790467.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1870521 bytes_read=672773 bytes_retransmit=9 bytes_invalid=0 send_seq=44632 receive_seq=44632 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992896 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=385173 sysload=0.26 cputime=94.011 memavail=7292868 print_time=2001.429 buffer_time=2.060 print_stall=0 extruder: target=240 temp=240.1 pwm=0.423
Stats 790468.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1871505 bytes_read=673191 bytes_retransmit=9 bytes_invalid=0 send_seq=44657 receive_seq=44657 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992891 heater_bed: target=80 temp=80.0 pwm=0.402 sd_pos=385345 sysload=0.32 cputime=94.083 memavail=7292868 print_time=2002.442 buffer_time=2.072 print_stall=0 extruder: target=240 temp=239.6 pwm=0.665
Stats 790469.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1872192 bytes_read=673603 bytes_retransmit=9 bytes_invalid=0 send_seq=44678 receive_seq=44678 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992885 heater_bed: target=80 temp=80.0 pwm=0.402 sd_pos=385402 sysload=0.32 cputime=94.142 memavail=7292868 print_time=2003.436 buffer_time=2.066 print_stall=0 extruder: target=240 temp=239.6 pwm=0.617
Stats 790470.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1873202 bytes_read=674021 bytes_retransmit=9 bytes_invalid=0 send_seq=44706 receive_seq=44706 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992949 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=385518 sysload=0.32 cputime=94.196 memavail=7292868 print_time=2004.382 buffer_time=2.011 print_stall=0 extruder: target=240 temp=240.2 pwm=0.391
Stats 790471.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1877443 bytes_read=674694 bytes_retransmit=9 bytes_invalid=0 send_seq=44785 receive_seq=44785 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119992940 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=386633 sysload=0.32 cputime=94.261 memavail=7292868 print_time=2005.567 buffer_time=2.196 print_stall=0 extruder: target=240 temp=240.5 pwm=0.273
Stats 790472.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=1880808 bytes_read=675305 bytes_retransmit=9 bytes_invalid=0 send_seq=44847 receive_seq=44847 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992931 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=387348 sysload=0.32 cputime=94.320 memavail=7293020 print_time=2006.521 buffer_time=2.150 print_stall=0 extruder: target=240 temp=240.7 pwm=0.249
Stats 790473.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1885055 bytes_read=675992 bytes_retransmit=9 bytes_invalid=0 send_seq=44925 receive_seq=44925 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992917 heater_bed: target=80 temp=80.0 pwm=0.358 sd_pos=387889 sysload=0.30 cputime=94.386 memavail=7293124 print_time=2007.719 buffer_time=2.347 print_stall=0 extruder: target=240 temp=239.8 pwm=0.721
Stats 790474.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1888606 bytes_read=676603 bytes_retransmit=9 bytes_invalid=0 send_seq=44992 receive_seq=44992 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992929 heater_bed: target=80 temp=80.0 pwm=0.535 sd_pos=388572 sysload=0.30 cputime=94.465 memavail=7293124 print_time=2008.829 buffer_time=2.457 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 790475.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1890636 bytes_read=677130 bytes_retransmit=9 bytes_invalid=0 send_seq=45036 receive_seq=45036 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992921 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=389346 sysload=0.30 cputime=94.546 memavail=7293124 print_time=2009.376 buffer_time=2.003 print_stall=0 extruder: target=240 temp=240.1 pwm=0.422
Stats 790476.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1894995 bytes_read=677813 bytes_retransmit=9 bytes_invalid=0 send_seq=45117 receive_seq=45117 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992912 heater_bed: target=80 temp=80.0 pwm=0.483 sd_pos=390831 sysload=0.30 cputime=94.639 memavail=7293124 print_time=2010.509 buffer_time=2.135 print_stall=0 extruder: target=240 temp=239.7 pwm=0.658
Stats 790477.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1898399 bytes_read=678411 bytes_retransmit=9 bytes_invalid=0 send_seq=45181 receive_seq=45181 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992910 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=391983 sysload=0.30 cputime=94.719 memavail=7293124 print_time=2011.544 buffer_time=2.170 print_stall=0 extruder: target=240 temp=240.0 pwm=0.507
Stats 790478.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1901882 bytes_read=679079 bytes_retransmit=9 bytes_invalid=0 send_seq=45250 receive_seq=45250 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992964 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=393093 sysload=0.27 cputime=94.802 memavail=7293124 print_time=2012.386 buffer_time=2.011 print_stall=0 extruder: target=240 temp=240.1 pwm=0.569
Stats 790479.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1906374 bytes_read=679772 bytes_retransmit=9 bytes_invalid=0 send_seq=45333 receive_seq=45333 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992954 heater_bed: target=80 temp=80.1 pwm=0.233 sd_pos=393995 sysload=0.27 cputime=94.880 memavail=7293124 print_time=2013.595 buffer_time=2.220 print_stall=0 extruder: target=240 temp=240.0 pwm=0.505
Stats 790480.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1910028 bytes_read=680395 bytes_retransmit=9 bytes_invalid=0 send_seq=45402 receive_seq=45402 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992946 heater_bed: target=80 temp=80.1 pwm=0.322 sd_pos=395170 sysload=0.27 cputime=94.970 memavail=7293124 print_time=2014.489 buffer_time=2.113 print_stall=0 extruder: target=240 temp=240.3 pwm=0.398
Stats 790481.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1914053 bytes_read=681077 bytes_retransmit=9 bytes_invalid=0 send_seq=45477 receive_seq=45477 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 upcoming_bytes=0 freq=119992940 heater_bed: target=80 temp=80.1 pwm=0.283 sd_pos=396605 sysload=0.27 cputime=95.058 memavail=7293124 print_time=2015.574 buffer_time=2.197 print_stall=0 extruder: target=240 temp=240.0 pwm=0.465
Stats 790482.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1917571 bytes_read=681675 bytes_retransmit=9 bytes_invalid=0 send_seq=45541 receive_seq=45541 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992937 heater_bed: target=80 temp=80.1 pwm=0.306 sd_pos=397694 sysload=0.27 cputime=95.136 memavail=7293124 print_time=2016.541 buffer_time=2.163 print_stall=0 extruder: target=240 temp=239.6 pwm=0.668
Stats 790483.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1921167 bytes_read=682319 bytes_retransmit=9 bytes_invalid=0 send_seq=45608 receive_seq=45608 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119992928 heater_bed: target=80 temp=80.1 pwm=0.458 sd_pos=398815 sysload=0.25 cputime=95.219 memavail=7293128 print_time=2017.445 buffer_time=2.066 print_stall=0 extruder: target=240 temp=240.3 pwm=0.332
Stats 790484.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1925320 bytes_read=683001 bytes_retransmit=9 bytes_invalid=0 send_seq=45686 receive_seq=45686 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119992918 heater_bed: target=80 temp=80.1 pwm=0.472 sd_pos=400278 sysload=0.25 cputime=95.295 memavail=7293128 print_time=2018.577 buffer_time=2.198 print_stall=0 extruder: target=240 temp=240.4 pwm=0.324
Stats 790485.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1928585 bytes_read=683599 bytes_retransmit=9 bytes_invalid=0 send_seq=45750 receive_seq=45750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992909 heater_bed: target=80 temp=80.1 pwm=0.314 sd_pos=401339 sysload=0.25 cputime=95.369 memavail=7293128 print_time=2019.421 buffer_time=2.042 print_stall=0 extruder: target=240 temp=239.9 pwm=0.562
Stats 790486.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1932911 bytes_read=684292 bytes_retransmit=9 bytes_invalid=0 send_seq=45830 receive_seq=45830 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=11 freq=119992903 heater_bed: target=80 temp=80.1 pwm=0.575 sd_pos=402746 sysload=0.25 cputime=95.450 memavail=7293128 print_time=2020.608 buffer_time=2.229 print_stall=0 extruder: target=240 temp=239.5 pwm=0.726
Stats 790487.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1936151 bytes_read=684904 bytes_retransmit=9 bytes_invalid=0 send_seq=45894 receive_seq=45894 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992940 heater_bed: target=80 temp=80.1 pwm=0.463 sd_pos=403799 sysload=0.25 cputime=95.526 memavail=7293128 print_time=2021.477 buffer_time=2.097 print_stall=0 extruder: target=240 temp=239.4 pwm=0.719
Stats 790488.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1940131 bytes_read=685578 bytes_retransmit=9 bytes_invalid=0 send_seq=45970 receive_seq=45970 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992937 heater_bed: target=80 temp=80.1 pwm=0.444 sd_pos=405155 sysload=0.31 cputime=95.600 memavail=7293128 print_time=2022.554 buffer_time=2.174 print_stall=0 extruder: target=240 temp=240.4 pwm=0.257
Stats 790489.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1943610 bytes_read=686196 bytes_retransmit=9 bytes_invalid=0 send_seq=46035 receive_seq=46035 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119992936 heater_bed: target=80 temp=80.1 pwm=0.530 sd_pos=406210 sysload=0.31 cputime=95.666 memavail=7293128 print_time=2023.524 buffer_time=2.144 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 790490.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1947716 bytes_read=686808 bytes_retransmit=9 bytes_invalid=0 send_seq=46111 receive_seq=46099 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=156 upcoming_bytes=0 freq=119992931 heater_bed: target=80 temp=80.1 pwm=0.462 sd_pos=407567 sysload=0.31 cputime=95.741 memavail=7293128 print_time=2024.640 buffer_time=2.255 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 790491.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1951183 bytes_read=687476 bytes_retransmit=9 bytes_invalid=0 send_seq=46177 receive_seq=46177 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992969 heater_bed: target=80 temp=80.1 pwm=0.407 sd_pos=408701 sysload=0.31 cputime=95.820 memavail=7292904 print_time=2025.545 buffer_time=2.160 print_stall=0 extruder: target=240 temp=240.2 pwm=0.413
Stats 790492.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=1954394 bytes_read=688079 bytes_retransmit=9 bytes_invalid=0 send_seq=46239 receive_seq=46239 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992959 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=409755 sysload=0.31 cputime=95.897 memavail=7292904 print_time=2026.414 buffer_time=2.029 print_stall=0 extruder: target=240 temp=239.9 pwm=0.526
Stats 790493.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1958808 bytes_read=688802 bytes_retransmit=9 bytes_invalid=0 send_seq=46322 receive_seq=46322 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992949 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=411111 sysload=0.29 cputime=95.985 memavail=7292908 print_time=2027.620 buffer_time=2.234 print_stall=0 extruder: target=240 temp=239.8 pwm=0.570
Stats 790494.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1961816 bytes_read=689380 bytes_retransmit=9 bytes_invalid=0 send_seq=46382 receive_seq=46382 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992939 heater_bed: target=80 temp=80.0 pwm=0.513 sd_pos=412137 sysload=0.29 cputime=96.058 memavail=7292908 print_time=2028.444 buffer_time=2.057 print_stall=0 extruder: target=240 temp=239.9 pwm=0.500
Stats 790495.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1965424 bytes_read=690018 bytes_retransmit=9 bytes_invalid=0 send_seq=46451 receive_seq=46451 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992931 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=413495 sysload=0.29 cputime=96.132 memavail=7292908 print_time=2029.533 buffer_time=2.145 print_stall=0 extruder: target=240 temp=239.7 pwm=0.599
Stats 790496.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1968742 bytes_read=690625 bytes_retransmit=9 bytes_invalid=0 send_seq=46514 receive_seq=46514 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=80.0 pwm=0.542 sd_pos=414544 sysload=0.29 cputime=96.198 memavail=7292908 print_time=2030.500 buffer_time=2.110 print_stall=0 extruder: target=240 temp=240.2 pwm=0.467
Stats 790497.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=1972560 bytes_read=691258 bytes_retransmit=9 bytes_invalid=0 send_seq=46585 receive_seq=46585 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992915 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=415845 sysload=0.29 cputime=96.277 memavail=7292508 print_time=2031.641 buffer_time=2.250 print_stall=0 extruder: target=240 temp=239.7 pwm=0.650
Stats 790498.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1975644 bytes_read=691867 bytes_retransmit=9 bytes_invalid=0 send_seq=46645 receive_seq=46645 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992907 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=416667 sysload=0.26 cputime=96.346 memavail=7292508 print_time=2033.044 buffer_time=2.653 print_stall=0 extruder: target=240 temp=239.7 pwm=0.638
Stats 790499.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1976516 bytes_read=692294 bytes_retransmit=9 bytes_invalid=0 send_seq=46672 receive_seq=46672 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992909 heater_bed: target=80 temp=80.0 pwm=0.346 sd_pos=416736 sysload=0.26 cputime=96.398 memavail=7292508 print_time=2033.973 buffer_time=2.581 print_stall=0 extruder: target=240 temp=240.4 pwm=0.236
Stats 790500.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1977894 bytes_read=692737 bytes_retransmit=9 bytes_invalid=0 send_seq=46705 receive_seq=46705 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992952 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=416968 sysload=0.26 cputime=96.460 memavail=7292508 print_time=2035.672 buffer_time=3.279 print_stall=0 extruder: target=240 temp=240.1 pwm=0.456
Stats 790501.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1978094 bytes_read=693095 bytes_retransmit=9 bytes_invalid=0 send_seq=46718 receive_seq=46718 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992958 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=416968 sysload=0.26 cputime=96.512 memavail=7292508 print_time=2035.672 buffer_time=2.278 print_stall=0 extruder: target=240 temp=240.0 pwm=0.463
Stats 790502.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=1978546 bytes_read=693472 bytes_retransmit=9 bytes_invalid=0 send_seq=46735 receive_seq=46735 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992948 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=416997 sysload=0.26 cputime=96.562 memavail=7292508 print_time=2037.195 buffer_time=2.800 print_stall=0 extruder: target=240 temp=240.0 pwm=0.547
Stats 790503.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1978836 bytes_read=693840 bytes_retransmit=9 bytes_invalid=0 send_seq=46750 receive_seq=46750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992939 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=417024 sysload=0.40 cputime=96.609 memavail=7292508 print_time=2038.123 buffer_time=2.727 print_stall=0 extruder: target=240 temp=240.4 pwm=0.340
Stats 790504.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1979395 bytes_read=694223 bytes_retransmit=9 bytes_invalid=0 send_seq=46768 receive_seq=46768 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992933 heater_bed: target=80 temp=79.9 pwm=0.492 sd_pos=417024 sysload=0.40 cputime=96.655 memavail=7292508 print_time=2038.692 buffer_time=2.296 print_stall=0 extruder: target=240 temp=240.1 pwm=0.505
Stats 790505.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1980023 bytes_read=694615 bytes_retransmit=9 bytes_invalid=0 send_seq=46788 receive_seq=46788 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992926 heater_bed: target=80 temp=79.9 pwm=0.492 sd_pos=417024 sysload=0.40 cputime=96.716 memavail=7292508 print_time=2039.747 buffer_time=2.350 print_stall=0 extruder: target=240 temp=240.2 pwm=0.507
Stats 790506.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1980515 bytes_read=694983 bytes_retransmit=9 bytes_invalid=0 send_seq=46806 receive_seq=46806 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992922 heater_bed: target=80 temp=79.9 pwm=0.492 sd_pos=417204 sysload=0.40 cputime=96.777 memavail=7292508 print_time=2041.324 buffer_time=2.926 print_stall=0 extruder: target=240 temp=240.3 pwm=0.444
Stats 790507.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1981056 bytes_read=695370 bytes_retransmit=9 bytes_invalid=0 send_seq=46825 receive_seq=46825 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=79.9 pwm=0.418 sd_pos=417349 sysload=0.40 cputime=96.838 memavail=7292508 print_time=2041.616 buffer_time=2.218 print_stall=0 extruder: target=240 temp=239.9 pwm=0.565
Stats 790508.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1981783 bytes_read=695779 bytes_retransmit=9 bytes_invalid=0 send_seq=46847 receive_seq=46847 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119992902 heater_bed: target=80 temp=79.9 pwm=0.499 sd_pos=417434 sysload=0.37 cputime=96.912 memavail=7292508 print_time=2043.179 buffer_time=2.780 print_stall=0 extruder: target=240 temp=240.4 pwm=0.288
Stats 790509.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1983140 bytes_read=696215 bytes_retransmit=9 bytes_invalid=0 send_seq=46880 receive_seq=46880 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992896 heater_bed: target=80 temp=80.0 pwm=0.345 sd_pos=417635 sysload=0.37 cputime=96.971 memavail=7292508 print_time=2044.204 buffer_time=2.803 print_stall=0 extruder: target=240 temp=240.1 pwm=0.436
Stats 790510.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1984146 bytes_read=696642 bytes_retransmit=9 bytes_invalid=0 send_seq=46907 receive_seq=46907 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992893 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=417838 sysload=0.37 cputime=97.040 memavail=7292508 print_time=2044.600 buffer_time=2.199 print_stall=0 extruder: target=240 temp=239.8 pwm=0.571
Stats 790511.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1985018 bytes_read=697054 bytes_retransmit=9 bytes_invalid=0 send_seq=46931 receive_seq=46931 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992886 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=417895 sysload=0.37 cputime=97.104 memavail=7292512 print_time=2045.485 buffer_time=2.083 print_stall=0 extruder: target=240 temp=239.6 pwm=0.651
Stats 790512.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1986109 bytes_read=697477 bytes_retransmit=9 bytes_invalid=0 send_seq=46960 receive_seq=46960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=418098 sysload=0.37 cputime=97.162 memavail=7292008 print_time=2047.100 buffer_time=2.698 print_stall=0 extruder: target=240 temp=240.0 pwm=0.477
Stats 790513.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1986540 bytes_read=697865 bytes_retransmit=9 bytes_invalid=0 send_seq=46976 receive_seq=46976 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992880 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=418126 sysload=0.34 cputime=97.228 memavail=7292032 print_time=2048.623 buffer_time=3.219 print_stall=0 extruder: target=240 temp=240.0 pwm=0.472
Stats 790514.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1986734 bytes_read=698227 bytes_retransmit=9 bytes_invalid=0 send_seq=46990 receive_seq=46990 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992876 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=418126 sysload=0.34 cputime=97.284 memavail=7292032 print_time=2048.623 buffer_time=2.218 print_stall=0 extruder: target=240 temp=240.1 pwm=0.504
Stats 790515.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1987013 bytes_read=698575 bytes_retransmit=9 bytes_invalid=0 send_seq=47004 receive_seq=47004 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992878 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=418154 sysload=0.34 cputime=97.350 memavail=7292032 print_time=2049.569 buffer_time=2.162 print_stall=0 extruder: target=240 temp=240.3 pwm=0.395
Stats 790516.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1987990 bytes_read=699003 bytes_retransmit=9 bytes_invalid=0 send_seq=47031 receive_seq=47031 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992872 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=418154 sysload=0.34 cputime=97.423 memavail=7291968 print_time=2050.634 buffer_time=2.226 print_stall=0 extruder: target=240 temp=240.0 pwm=0.525
Stats 790517.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1988622 bytes_read=699395 bytes_retransmit=9 bytes_invalid=0 send_seq=47051 receive_seq=47051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992872 heater_bed: target=80 temp=80.0 pwm=0.369 sd_pos=418299 sysload=0.34 cputime=97.494 memavail=7291840 print_time=2052.827 buffer_time=3.418 print_stall=0 extruder: target=240 temp=239.9 pwm=0.472
Stats 790518.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1988822 bytes_read=699753 bytes_retransmit=9 bytes_invalid=0 send_seq=47064 receive_seq=47064 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=418299 sysload=0.47 cputime=97.554 memavail=7291840 print_time=2052.827 buffer_time=2.417 print_stall=0 extruder: target=240 temp=239.8 pwm=0.560
Stats 790519.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1989662 bytes_read=700161 bytes_retransmit=9 bytes_invalid=0 send_seq=47087 receive_seq=47087 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992912 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=418471 sysload=0.47 cputime=97.617 memavail=7292000 print_time=2053.543 buffer_time=2.132 print_stall=0 extruder: target=240 temp=239.9 pwm=0.481
Stats 790520.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1990122 bytes_read=700538 bytes_retransmit=9 bytes_invalid=0 send_seq=47104 receive_seq=47104 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992906 heater_bed: target=80 temp=80.0 pwm=0.506 sd_pos=418528 sysload=0.47 cputime=97.678 memavail=7292096 print_time=2054.709 buffer_time=2.297 print_stall=0 extruder: target=240 temp=240.1 pwm=0.512
Stats 790521.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1991465 bytes_read=700971 bytes_retransmit=9 bytes_invalid=0 send_seq=47135 receive_seq=47135 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992898 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=418644 sysload=0.47 cputime=97.734 memavail=7292096 print_time=2055.780 buffer_time=2.367 print_stall=0 extruder: target=240 temp=240.0 pwm=0.583
Stats 790522.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=1994448 bytes_read=701554 bytes_retransmit=9 bytes_invalid=0 send_seq=47193 receive_seq=47193 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=80.0 pwm=0.549 sd_pos=419549 sysload=0.47 cputime=97.812 memavail=7292096 print_time=2056.639 buffer_time=2.225 print_stall=0 extruder: target=240 temp=239.9 pwm=0.594
Stats 790523.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1997589 bytes_read=702166 bytes_retransmit=9 bytes_invalid=0 send_seq=47254 receive_seq=47254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992887 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=420315 sysload=0.52 cputime=97.884 memavail=7292096 print_time=2057.415 buffer_time=2.001 print_stall=0 extruder: target=240 temp=240.0 pwm=0.544
Stats 790524.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2002458 bytes_read=702834 bytes_retransmit=9 bytes_invalid=0 send_seq=47343 receive_seq=47332 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=526 upcoming_bytes=0 freq=119992888 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=420969 sysload=0.52 cputime=97.959 memavail=7292096 print_time=2059.047 buffer_time=2.629 print_stall=0 extruder: target=240 temp=240.0 pwm=0.473
Stats 790525.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2004617 bytes_read=703407 bytes_retransmit=9 bytes_invalid=0 send_seq=47388 receive_seq=47388 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992891 heater_bed: target=80 temp=80.0 pwm=0.336 sd_pos=421237 sysload=0.52 cputime=98.022 memavail=7292096 print_time=2059.555 buffer_time=2.137 print_stall=0 extruder: target=240 temp=240.0 pwm=0.477
Stats 790526.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2007872 bytes_read=704019 bytes_retransmit=9 bytes_invalid=0 send_seq=47452 receive_seq=47452 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992888 heater_bed: target=80 temp=80.0 pwm=0.501 sd_pos=422578 sysload=0.52 cputime=98.105 memavail=7292096 print_time=2060.558 buffer_time=2.140 print_stall=0 extruder: target=240 temp=240.1 pwm=0.477
Stats 790527.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2011586 bytes_read=704642 bytes_retransmit=9 bytes_invalid=0 send_seq=47521 receive_seq=47521 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992887 heater_bed: target=80 temp=80.0 pwm=0.350 sd_pos=424198 sysload=0.52 cputime=98.210 memavail=7292308 print_time=2061.602 buffer_time=2.183 print_stall=0 extruder: target=240 temp=240.2 pwm=0.423
Stats 790528.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2014861 bytes_read=705261 bytes_retransmit=9 bytes_invalid=0 send_seq=47583 receive_seq=47583 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119992897 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=425549 sysload=0.47 cputime=98.290 memavail=7292308 print_time=2062.606 buffer_time=2.186 print_stall=0 extruder: target=240 temp=240.3 pwm=0.424
Stats 790529.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2018032 bytes_read=705858 bytes_retransmit=9 bytes_invalid=0 send_seq=47644 receive_seq=47644 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=426826 sysload=0.47 cputime=98.372 memavail=7292308 print_time=2063.453 buffer_time=2.033 print_stall=0 extruder: target=240 temp=240.1 pwm=0.489
Stats 790530.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2022427 bytes_read=706536 bytes_retransmit=9 bytes_invalid=0 send_seq=47724 receive_seq=47724 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992893 heater_bed: target=80 temp=80.0 pwm=0.392 sd_pos=427812 sysload=0.47 cputime=98.451 memavail=7292308 print_time=2064.608 buffer_time=2.187 print_stall=0 extruder: target=240 temp=240.4 pwm=0.327
Stats 790531.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2025894 bytes_read=707154 bytes_retransmit=9 bytes_invalid=0 send_seq=47789 receive_seq=47789 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992954 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=429099 sysload=0.47 cputime=98.538 memavail=7292084 print_time=2065.452 buffer_time=2.031 print_stall=0 extruder: target=240 temp=240.4 pwm=0.349
Stats 790532.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2029750 bytes_read=707806 bytes_retransmit=9 bytes_invalid=0 send_seq=47861 receive_seq=47861 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992947 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=430672 sysload=0.47 cputime=98.617 memavail=7291832 print_time=2066.462 buffer_time=2.040 print_stall=0 extruder: target=240 temp=239.9 pwm=0.556
Stats 790533.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2033201 bytes_read=708446 bytes_retransmit=9 bytes_invalid=0 send_seq=47928 receive_seq=47928 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992933 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=431930 sysload=0.44 cputime=98.694 memavail=7291844 print_time=2067.429 buffer_time=2.006 print_stall=0 extruder: target=240 temp=240.1 pwm=0.447
Stats 790534.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2037721 bytes_read=709144 bytes_retransmit=9 bytes_invalid=0 send_seq=48009 receive_seq=48009 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992930 heater_bed: target=80 temp=80.1 pwm=0.390 sd_pos=433772 sysload=0.44 cputime=98.779 memavail=7291844 print_time=2068.608 buffer_time=2.184 print_stall=0 extruder: target=240 temp=240.1 pwm=0.432
Stats 790535.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2040894 bytes_read=709746 bytes_retransmit=9 bytes_invalid=0 send_seq=48071 receive_seq=48071 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=80.1 pwm=0.389 sd_pos=435043 sysload=0.44 cputime=98.857 memavail=7291844 print_time=2069.448 buffer_time=2.023 print_stall=0 extruder: target=240 temp=240.3 pwm=0.359
Stats 790536.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2045280 bytes_read=710424 bytes_retransmit=9 bytes_invalid=0 send_seq=48151 receive_seq=48151 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992926 heater_bed: target=80 temp=80.1 pwm=0.389 sd_pos=436755 sysload=0.44 cputime=98.933 memavail=7291844 print_time=2070.678 buffer_time=2.253 print_stall=0 extruder: target=240 temp=240.3 pwm=0.416
Stats 790537.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2048815 bytes_read=711057 bytes_retransmit=9 bytes_invalid=0 send_seq=48219 receive_seq=48219 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992917 heater_bed: target=80 temp=80.1 pwm=0.348 sd_pos=438087 sysload=0.44 cputime=99.004 memavail=7291844 print_time=2071.594 buffer_time=2.168 print_stall=0 extruder: target=240 temp=239.7 pwm=0.680
Stats 790538.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2051993 bytes_read=711675 bytes_retransmit=9 bytes_invalid=0 send_seq=48281 receive_seq=48281 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992907 heater_bed: target=80 temp=80.1 pwm=0.515 sd_pos=439304 sysload=0.40 cputime=99.075 memavail=7291844 print_time=2072.433 buffer_time=2.006 print_stall=0 extruder: target=240 temp=239.8 pwm=0.593
Stats 790539.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2056442 bytes_read=712363 bytes_retransmit=9 bytes_invalid=0 send_seq=48363 receive_seq=48363 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119992913 heater_bed: target=80 temp=80.1 pwm=0.496 sd_pos=440962 sysload=0.40 cputime=99.157 memavail=7291844 print_time=2073.664 buffer_time=2.236 print_stall=0 extruder: target=240 temp=239.8 pwm=0.531
Stats 790540.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2059762 bytes_read=712971 bytes_retransmit=9 bytes_invalid=0 send_seq=48426 receive_seq=48426 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992908 heater_bed: target=80 temp=80.1 pwm=0.409 sd_pos=442284 sysload=0.40 cputime=99.231 memavail=7291844 print_time=2074.579 buffer_time=2.151 print_stall=0 extruder: target=240 temp=239.7 pwm=0.531
Stats 790541.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2064225 bytes_read=713668 bytes_retransmit=9 bytes_invalid=0 send_seq=48507 receive_seq=48507 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992904 heater_bed: target=80 temp=80.1 pwm=0.467 sd_pos=443942 sysload=0.40 cputime=99.304 memavail=7291848 print_time=2075.810 buffer_time=2.380 print_stall=0 extruder: target=240 temp=240.0 pwm=0.472
Stats 790542.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2067279 bytes_read=714231 bytes_retransmit=9 bytes_invalid=0 send_seq=48564 receive_seq=48564 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=80.1 pwm=0.335 sd_pos=445159 sysload=0.40 cputime=99.372 memavail=7292292 print_time=2076.649 buffer_time=2.219 print_stall=0 extruder: target=240 temp=240.0 pwm=0.486
Stats 790543.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2070578 bytes_read=714847 bytes_retransmit=9 bytes_invalid=0 send_seq=48626 receive_seq=48626 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119992924 heater_bed: target=80 temp=80.0 pwm=0.447 sd_pos=446481 sysload=0.37 cputime=99.448 memavail=7292352 print_time=2077.565 buffer_time=2.134 print_stall=0 extruder: target=240 temp=240.1 pwm=0.486
Stats 790544.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2074899 bytes_read=715536 bytes_retransmit=9 bytes_invalid=0 send_seq=48707 receive_seq=48707 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992917 heater_bed: target=80 temp=80.0 pwm=0.515 sd_pos=448138 sysload=0.37 cputime=99.527 memavail=7292128 print_time=2078.795 buffer_time=2.363 print_stall=0 extruder: target=240 temp=239.9 pwm=0.503
Stats 790545.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2077913 bytes_read=716097 bytes_retransmit=9 bytes_invalid=0 send_seq=48765 receive_seq=48765 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992907 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=449351 sysload=0.37 cputime=99.603 memavail=7292128 print_time=2079.635 buffer_time=2.203 print_stall=0 extruder: target=240 temp=239.9 pwm=0.529
Stats 790546.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2080964 bytes_read=716685 bytes_retransmit=9 bytes_invalid=0 send_seq=48824 receive_seq=48824 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992899 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=450668 sysload=0.37 cputime=99.677 memavail=7292128 print_time=2080.551 buffer_time=2.117 print_stall=0 extruder: target=240 temp=239.9 pwm=0.529
Stats 790547.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2084787 bytes_read=717342 bytes_retransmit=9 bytes_invalid=0 send_seq=48897 receive_seq=48897 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992897 heater_bed: target=80 temp=80.0 pwm=0.627 sd_pos=452182 sysload=0.37 cputime=99.763 memavail=7292128 print_time=2081.677 buffer_time=2.243 print_stall=0 extruder: target=240 temp=239.8 pwm=0.564
Stats 790548.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2088422 bytes_read=717976 bytes_retransmit=9 bytes_invalid=0 send_seq=48965 receive_seq=48965 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992891 heater_bed: target=80 temp=80.0 pwm=0.506 sd_pos=453216 sysload=0.34 cputime=99.835 memavail=7292128 print_time=2083.325 buffer_time=2.891 print_stall=0 extruder: target=240 temp=239.9 pwm=0.529
Stats 790549.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2089282 bytes_read=718384 bytes_retransmit=9 bytes_invalid=0 send_seq=48988 receive_seq=48988 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992885 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=453273 sysload=0.34 cputime=99.891 memavail=7292128 print_time=2084.255 buffer_time=2.819 print_stall=0 extruder: target=240 temp=240.1 pwm=0.473
Stats 790550.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2090555 bytes_read=718831 bytes_retransmit=9 bytes_invalid=0 send_seq=49019 receive_seq=49019 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=79.9 pwm=0.493 sd_pos=453505 sysload=0.34 cputime=99.955 memavail=7292384 print_time=2085.953 buffer_time=3.517 print_stall=0 extruder: target=240 temp=239.8 pwm=0.567
Stats 790551.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2090796 bytes_read=719174 bytes_retransmit=9 bytes_invalid=0 send_seq=49032 receive_seq=49032 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992889 heater_bed: target=80 temp=79.9 pwm=0.500 sd_pos=453505 sysload=0.34 cputime=100.002 memavail=7292384 print_time=2085.953 buffer_time=2.516 print_stall=0 extruder: target=240 temp=239.9 pwm=0.504
Stats 790552.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2091248 bytes_read=719552 bytes_retransmit=9 bytes_invalid=0 send_seq=49049 receive_seq=49049 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992945 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=453534 sysload=0.34 cputime=100.055 memavail=7292324 print_time=2087.476 buffer_time=3.039 print_stall=0 extruder: target=240 temp=240.1 pwm=0.426
Stats 790553.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2091458 bytes_read=719934 bytes_retransmit=9 bytes_invalid=0 send_seq=49064 receive_seq=49064 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992934 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=453534 sysload=0.31 cputime=100.101 memavail=7292388 print_time=2087.476 buffer_time=2.038 print_stall=0 extruder: target=240 temp=240.2 pwm=0.387
Stats 790554.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2092051 bytes_read=720307 bytes_retransmit=9 bytes_invalid=0 send_seq=49083 receive_seq=49083 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992928 heater_bed: target=80 temp=79.9 pwm=0.504 sd_pos=453561 sysload=0.31 cputime=100.150 memavail=7292388 print_time=2088.973 buffer_time=2.535 print_stall=0 extruder: target=240 temp=240.3 pwm=0.412
Stats 790555.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2092700 bytes_read=720700 bytes_retransmit=9 bytes_invalid=0 send_seq=49103 receive_seq=49103 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992924 heater_bed: target=80 temp=79.9 pwm=0.450 sd_pos=453561 sysload=0.31 cputime=100.205 memavail=7292388 print_time=2090.028 buffer_time=2.589 print_stall=0 extruder: target=240 temp=240.1 pwm=0.505
Stats 790556.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2093248 bytes_read=721092 bytes_retransmit=9 bytes_invalid=0 send_seq=49123 receive_seq=49123 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=453705 sysload=0.31 cputime=100.260 memavail=7292388 print_time=2091.605 buffer_time=3.166 print_stall=0 extruder: target=240 temp=240.0 pwm=0.510
Stats 790557.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2093448 bytes_read=721435 bytes_retransmit=9 bytes_invalid=0 send_seq=49136 receive_seq=49136 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992913 heater_bed: target=80 temp=79.9 pwm=0.512 sd_pos=453705 sysload=0.31 cputime=100.308 memavail=7292388 print_time=2091.605 buffer_time=2.165 print_stall=0 extruder: target=240 temp=239.8 pwm=0.553
Stats 790558.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2094405 bytes_read=721873 bytes_retransmit=9 bytes_invalid=0 send_seq=49162 receive_seq=49162 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992918 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=453878 sysload=0.29 cputime=100.372 memavail=7292892 print_time=2092.609 buffer_time=2.168 print_stall=0 extruder: target=240 temp=239.8 pwm=0.525
Stats 790559.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2094737 bytes_read=722245 bytes_retransmit=9 bytes_invalid=0 send_seq=49178 receive_seq=49178 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=453935 sysload=0.29 cputime=100.428 memavail=7292892 print_time=2093.460 buffer_time=2.019 print_stall=0 extruder: target=240 temp=240.2 pwm=0.351
Stats 790560.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2096041 bytes_read=722683 bytes_retransmit=9 bytes_invalid=0 send_seq=49210 receive_seq=49210 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=454136 sysload=0.29 cputime=100.486 memavail=7292892 print_time=2094.485 buffer_time=2.043 print_stall=0 extruder: target=240 temp=240.3 pwm=0.366
Stats 790561.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2097389 bytes_read=723131 bytes_retransmit=9 bytes_invalid=0 send_seq=49241 receive_seq=49241 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992934 heater_bed: target=80 temp=80.0 pwm=0.311 sd_pos=454408 sysload=0.29 cputime=100.542 memavail=7292892 print_time=2095.642 buffer_time=2.200 print_stall=0 extruder: target=240 temp=240.0 pwm=0.541
Stats 790562.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2098828 bytes_read=723593 bytes_retransmit=9 bytes_invalid=0 send_seq=49275 receive_seq=49275 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992934 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=454635 sysload=0.29 cputime=100.600 memavail=7292388 print_time=2097.382 buffer_time=2.939 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 790563.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2099198 bytes_read=723961 bytes_retransmit=9 bytes_invalid=0 send_seq=49290 receive_seq=49290 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992927 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=454663 sysload=0.26 cputime=100.655 memavail=7292140 print_time=2098.904 buffer_time=3.460 print_stall=0 extruder: target=240 temp=239.8 pwm=0.574
Stats 790564.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2099432 bytes_read=724319 bytes_retransmit=9 bytes_invalid=0 send_seq=49303 receive_seq=49303 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992922 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=454663 sysload=0.26 cputime=100.705 memavail=7292140 print_time=2098.904 buffer_time=2.460 print_stall=0 extruder: target=240 temp=239.7 pwm=0.574
Stats 790565.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2099754 bytes_read=724691 bytes_retransmit=9 bytes_invalid=0 send_seq=49319 receive_seq=49319 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992947 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=454691 sysload=0.26 cputime=100.761 memavail=7292140 print_time=2099.850 buffer_time=2.404 print_stall=0 extruder: target=240 temp=240.3 pwm=0.388
Stats 790566.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2100330 bytes_read=725064 bytes_retransmit=9 bytes_invalid=0 send_seq=49338 receive_seq=49338 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992942 heater_bed: target=80 temp=80.0 pwm=0.367 sd_pos=454691 sysload=0.26 cputime=100.817 memavail=7292140 print_time=2100.454 buffer_time=2.008 print_stall=0 extruder: target=240 temp=240.4 pwm=0.343
Stats 790567.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2101280 bytes_read=725477 bytes_retransmit=9 bytes_invalid=0 send_seq=49362 receive_seq=49362 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992936 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=454848 sysload=0.26 cputime=100.889 memavail=7292140 print_time=2103.108 buffer_time=3.661 print_stall=0 extruder: target=240 temp=240.2 pwm=0.483
Stats 790568.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2101481 bytes_read=725854 bytes_retransmit=9 bytes_invalid=0 send_seq=49376 receive_seq=49376 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992933 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=454848 sysload=0.24 cputime=100.946 memavail=7292140 print_time=2103.108 buffer_time=2.660 print_stall=0 extruder: target=240 temp=239.9 pwm=0.538
Stats 790569.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2102208 bytes_read=726232 bytes_retransmit=9 bytes_invalid=0 send_seq=49396 receive_seq=49396 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119992929 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=455020 sysload=0.24 cputime=101.009 memavail=7292140 print_time=2103.527 buffer_time=2.079 print_stall=0 extruder: target=240 temp=240.0 pwm=0.494
Stats 790570.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2102771 bytes_read=726615 bytes_retransmit=9 bytes_invalid=0 send_seq=49414 receive_seq=49414 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992970 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=455077 sysload=0.24 cputime=101.086 memavail=7292140 print_time=2104.990 buffer_time=2.541 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 790571.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2104090 bytes_read=727062 bytes_retransmit=9 bytes_invalid=0 send_seq=49445 receive_seq=49445 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992958 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=455193 sysload=0.24 cputime=101.167 memavail=7292140 print_time=2106.061 buffer_time=2.611 print_stall=0 extruder: target=240 temp=239.9 pwm=0.546
Stats 790572.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2106682 bytes_read=727605 bytes_retransmit=9 bytes_invalid=0 send_seq=49498 receive_seq=49498 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992950 heater_bed: target=80 temp=80.1 pwm=0.370 sd_pos=455560 sysload=0.24 cputime=101.238 memavail=7292592 print_time=2106.746 buffer_time=2.295 print_stall=0 extruder: target=240 temp=240.1 pwm=0.413
Stats 790573.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2109897 bytes_read=728223 bytes_retransmit=9 bytes_invalid=0 send_seq=49560 receive_seq=49560 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992947 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=456650 sysload=0.22 cputime=101.325 memavail=7292652 print_time=2107.601 buffer_time=2.148 print_stall=0 extruder: target=240 temp=240.2 pwm=0.396
Stats 790574.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2114043 bytes_read=728910 bytes_retransmit=9 bytes_invalid=0 send_seq=49639 receive_seq=49639 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992942 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=457126 sysload=0.22 cputime=101.419 memavail=7292652 print_time=2108.780 buffer_time=2.326 print_stall=0 extruder: target=240 temp=240.1 pwm=0.443
Stats 790575.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2117076 bytes_read=729483 bytes_retransmit=9 bytes_invalid=0 send_seq=49698 receive_seq=49698 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992933 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=457470 sysload=0.22 cputime=101.501 memavail=7292428 print_time=2109.726 buffer_time=2.272 print_stall=0 extruder: target=240 temp=240.1 pwm=0.475
Stats 790576.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2120208 bytes_read=730076 bytes_retransmit=9 bytes_invalid=0 send_seq=49758 receive_seq=49758 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=3 upcoming_bytes=0 freq=119992929 heater_bed: target=80 temp=80.0 pwm=0.400 sd_pos=458471 sysload=0.22 cputime=101.584 memavail=7292232 print_time=2110.664 buffer_time=2.209 print_stall=0 extruder: target=240 temp=240.0 pwm=0.499
Stats 790577.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2123360 bytes_read=730668 bytes_retransmit=9 bytes_invalid=0 send_seq=49818 receive_seq=49818 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992925 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=459675 sysload=0.22 cputime=101.675 memavail=7292008 print_time=2111.494 buffer_time=2.038 print_stall=0 extruder: target=240 temp=240.0 pwm=0.499
Stats 790578.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2127703 bytes_read=731362 bytes_retransmit=9 bytes_invalid=0 send_seq=49898 receive_seq=49898 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992919 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=460797 sysload=0.20 cputime=101.766 memavail=7292008 print_time=2112.694 buffer_time=2.238 print_stall=0 extruder: target=240 temp=240.0 pwm=0.529
Stats 790579.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2131003 bytes_read=731981 bytes_retransmit=9 bytes_invalid=0 send_seq=49964 receive_seq=49964 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=462089 sysload=0.20 cputime=101.852 memavail=7292008 print_time=2113.526 buffer_time=2.069 print_stall=0 extruder: target=240 temp=239.8 pwm=0.609
Stats 790580.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2135032 bytes_read=732639 bytes_retransmit=9 bytes_invalid=0 send_seq=50039 receive_seq=50039 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992907 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=463730 sysload=0.20 cputime=101.937 memavail=7289240 print_time=2114.598 buffer_time=2.140 print_stall=0 extruder: target=240 temp=240.1 pwm=0.523
Stats 790581.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2139101 bytes_read=733282 bytes_retransmit=9 bytes_invalid=0 send_seq=50113 receive_seq=50113 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992898 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=464856 sysload=0.20 cputime=102.031 memavail=7292240 print_time=2115.656 buffer_time=2.197 print_stall=0 extruder: target=240 temp=240.2 pwm=0.507
Stats 790582.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2142655 bytes_read=733934 bytes_retransmit=9 bytes_invalid=0 send_seq=50182 receive_seq=50182 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992886 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=466152 sysload=0.20 cputime=102.105 memavail=7292016 print_time=2116.584 buffer_time=2.126 print_stall=0 extruder: target=240 temp=240.0 pwm=0.522
Stats 790583.3: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2146617 bytes_read=734593 bytes_retransmit=9 bytes_invalid=0 send_seq=50255 receive_seq=50255 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.1 pwm=0.416 sd_pos=467791 sysload=0.19 cputime=102.177 memavail=7292016 print_time=2117.637 buffer_time=2.177 print_stall=0 extruder: target=240 temp=239.9 pwm=0.579
Stats 790584.3: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2150005 bytes_read=735181 bytes_retransmit=9 bytes_invalid=0 send_seq=50317 receive_seq=50317 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.1 pwm=0.351 sd_pos=469140 sysload=0.19 cputime=102.262 memavail=7292016 print_time=2118.550 buffer_time=2.090 print_stall=0 extruder: target=240 temp=239.8 pwm=0.588
Stats 790585.3: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2153929 bytes_read=735858 bytes_retransmit=9 bytes_invalid=0 send_seq=50391 receive_seq=50391 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.1 pwm=0.389 sd_pos=470695 sysload=0.19 cputime=102.333 memavail=7292016 print_time=2119.664 buffer_time=2.204 print_stall=0 extruder: target=240 temp=240.0 pwm=0.506
Stats 790586.3: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2157081 bytes_read=736441 bytes_retransmit=9 bytes_invalid=0 send_seq=50452 receive_seq=50452 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.1 pwm=0.389 sd_pos=471959 sysload=0.19 cputime=102.410 memavail=7292016 print_time=2120.511 buffer_time=2.050 print_stall=0 extruder: target=240 temp=240.1 pwm=0.454
Stats 790587.3: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2160816 bytes_read=737064 bytes_retransmit=9 bytes_invalid=0 send_seq=50521 receive_seq=50521 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992873 heater_bed: target=80 temp=80.2 pwm=0.319 sd_pos=473552 sysload=0.19 cputime=102.512 memavail=7291464 print_time=2121.555 buffer_time=2.093 print_stall=0 extruder: target=240 temp=240.3 pwm=0.388
Stats 790588.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2165130 bytes_read=737782 bytes_retransmit=9 bytes_invalid=0 send_seq=50600 receive_seq=50600 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=80.2 pwm=0.319 sd_pos=475164 sysload=0.17 cputime=102.595 memavail=7291540 print_time=2122.765 buffer_time=2.302 print_stall=0 extruder: target=240 temp=239.9 pwm=0.591
Stats 790589.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2168105 bytes_read=738340 bytes_retransmit=9 bytes_invalid=0 send_seq=50656 receive_seq=50656 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.1 pwm=0.423 sd_pos=476358 sysload=0.17 cputime=102.659 memavail=7291540 print_time=2123.592 buffer_time=2.128 print_stall=0 extruder: target=240 temp=239.8 pwm=0.513
Stats 790590.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2171706 bytes_read=738953 bytes_retransmit=9 bytes_invalid=0 send_seq=50723 receive_seq=50723 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=80.1 pwm=0.453 sd_pos=477882 sysload=0.17 cputime=102.732 memavail=7291540 print_time=2124.611 buffer_time=2.145 print_stall=0 extruder: target=240 temp=239.6 pwm=0.571
Stats 790591.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2175011 bytes_read=739565 bytes_retransmit=9 bytes_invalid=0 send_seq=50784 receive_seq=50784 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.1 pwm=0.453 sd_pos=479060 sysload=0.17 cputime=102.810 memavail=7291540 print_time=2125.545 buffer_time=2.077 print_stall=0 extruder: target=240 temp=239.9 pwm=0.484
Stats 790592.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2178869 bytes_read=740208 bytes_retransmit=9 bytes_invalid=0 send_seq=50857 receive_seq=50857 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=80.1 pwm=0.527 sd_pos=480654 sysload=0.17 cputime=102.899 memavail=7291288 print_time=2126.597 buffer_time=2.129 print_stall=0 extruder: target=240 temp=240.0 pwm=0.421
Stats 790593.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2182103 bytes_read=740802 bytes_retransmit=9 bytes_invalid=0 send_seq=50917 receive_seq=50917 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992876 heater_bed: target=80 temp=80.1 pwm=0.343 sd_pos=481956 sysload=0.24 cputime=102.973 memavail=7291292 print_time=2127.510 buffer_time=2.041 print_stall=0 extruder: target=240 temp=240.2 pwm=0.421
Stats 790594.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2185976 bytes_read=741480 bytes_retransmit=9 bytes_invalid=0 send_seq=50989 receive_seq=50989 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.1 pwm=0.452 sd_pos=483455 sysload=0.24 cputime=103.054 memavail=7291292 print_time=2128.624 buffer_time=2.154 print_stall=0 extruder: target=240 temp=239.7 pwm=0.640
Stats 790595.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2188964 bytes_read=742053 bytes_retransmit=9 bytes_invalid=0 send_seq=51048 receive_seq=51048 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=80.1 pwm=0.451 sd_pos=484676 sysload=0.24 cputime=103.120 memavail=7291292 print_time=2129.471 buffer_time=2.001 print_stall=0 extruder: target=240 temp=239.6 pwm=0.677
Stats 790596.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2192404 bytes_read=742651 bytes_retransmit=9 bytes_invalid=0 send_seq=51112 receive_seq=51112 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992872 heater_bed: target=80 temp=80.1 pwm=0.395 sd_pos=486228 sysload=0.24 cputime=103.203 memavail=7291292 print_time=2130.515 buffer_time=2.044 print_stall=0 extruder: target=240 temp=239.8 pwm=0.504
Stats 790597.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2196338 bytes_read=743318 bytes_retransmit=9 bytes_invalid=0 send_seq=51184 receive_seq=51184 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992873 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=487833 sysload=0.24 cputime=103.284 memavail=7291292 print_time=2131.725 buffer_time=2.254 print_stall=0 extruder: target=240 temp=239.8 pwm=0.492
Stats 790598.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2199130 bytes_read=743887 bytes_retransmit=9 bytes_invalid=0 send_seq=51239 receive_seq=51239 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992875 heater_bed: target=80 temp=80.0 pwm=0.577 sd_pos=488827 sysload=0.22 cputime=103.353 memavail=7291292 print_time=2132.579 buffer_time=2.107 print_stall=0 extruder: target=240 temp=239.8 pwm=0.560
Stats 790599.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2202168 bytes_read=744455 bytes_retransmit=9 bytes_invalid=0 send_seq=51297 receive_seq=51297 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992873 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=489699 sysload=0.22 cputime=103.425 memavail=7291292 print_time=2134.004 buffer_time=2.531 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 790600.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2203004 bytes_read=744887 bytes_retransmit=9 bytes_invalid=0 send_seq=51322 receive_seq=51322 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992918 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=489756 sysload=0.22 cputime=103.482 memavail=7291292 print_time=2134.933 buffer_time=2.460 print_stall=0 extruder: target=240 temp=239.9 pwm=0.526
Stats 790601.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2204354 bytes_read=745320 bytes_retransmit=9 bytes_invalid=0 send_seq=51353 receive_seq=51353 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=489988 sysload=0.22 cputime=103.535 memavail=7291292 print_time=2136.631 buffer_time=3.157 print_stall=0 extruder: target=240 temp=240.0 pwm=0.471
Stats 790602.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2204543 bytes_read=745663 bytes_retransmit=9 bytes_invalid=0 send_seq=51366 receive_seq=51366 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=80.0 pwm=0.374 sd_pos=489988 sysload=0.22 cputime=103.578 memavail=7291068 print_time=2136.631 buffer_time=2.156 print_stall=0 extruder: target=240 temp=239.9 pwm=0.526
Stats 790603.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2204994 bytes_read=746070 bytes_retransmit=9 bytes_invalid=0 send_seq=51383 receive_seq=51383 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992900 heater_bed: target=80 temp=80.0 pwm=0.374 sd_pos=490017 sysload=0.20 cputime=103.632 memavail=7291072 print_time=2138.155 buffer_time=2.678 print_stall=0 extruder: target=240 temp=240.2 pwm=0.437
Stats 790604.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2205236 bytes_read=746408 bytes_retransmit=9 bytes_invalid=0 send_seq=51395 receive_seq=51395 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992926 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=490044 sysload=0.20 cputime=103.685 memavail=7291072 print_time=2139.083 buffer_time=2.606 print_stall=0 extruder: target=240 temp=240.2 pwm=0.437
Stats 790605.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2205768 bytes_read=746791 bytes_retransmit=9 bytes_invalid=0 send_seq=51413 receive_seq=51413 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=80 temp=79.9 pwm=0.457 sd_pos=490044 sysload=0.20 cputime=103.734 memavail=7291072 print_time=2139.652 buffer_time=2.174 print_stall=0 extruder: target=240 temp=240.0 pwm=0.582
Stats 790606.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2206415 bytes_read=747188 bytes_retransmit=9 bytes_invalid=0 send_seq=51434 receive_seq=51434 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992912 heater_bed: target=80 temp=79.9 pwm=0.511 sd_pos=490044 sysload=0.20 cputime=103.783 memavail=7291072 print_time=2140.707 buffer_time=2.228 print_stall=0 extruder: target=240 temp=240.1 pwm=0.526
Stats 790607.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2206918 bytes_read=747556 bytes_retransmit=9 bytes_invalid=0 send_seq=51452 receive_seq=51452 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=79.9 pwm=0.509 sd_pos=490188 sysload=0.20 cputime=103.832 memavail=7291072 print_time=2142.284 buffer_time=2.804 print_stall=0 extruder: target=240 temp=239.8 pwm=0.605
Stats 790608.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2207454 bytes_read=747954 bytes_retransmit=9 bytes_invalid=0 send_seq=51470 receive_seq=51470 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=79.9 pwm=0.459 sd_pos=490333 sysload=0.18 cputime=103.878 memavail=7291072 print_time=2142.576 buffer_time=2.096 print_stall=0 extruder: target=240 temp=240.1 pwm=0.426
Stats 790609.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2208144 bytes_read=748341 bytes_retransmit=9 bytes_invalid=0 send_seq=51489 receive_seq=51489 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992950 heater_bed: target=80 temp=79.9 pwm=0.459 sd_pos=490418 sysload=0.18 cputime=103.937 memavail=7291072 print_time=2144.139 buffer_time=2.658 print_stall=0 extruder: target=240 temp=240.0 pwm=0.509
Stats 790610.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2209470 bytes_read=748779 bytes_retransmit=9 bytes_invalid=0 send_seq=51521 receive_seq=51521 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992944 heater_bed: target=80 temp=79.9 pwm=0.373 sd_pos=490619 sysload=0.18 cputime=103.989 memavail=7291072 print_time=2145.163 buffer_time=2.682 print_stall=0 extruder: target=240 temp=240.2 pwm=0.364
Stats 790611.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2210473 bytes_read=749197 bytes_retransmit=9 bytes_invalid=0 send_seq=51546 receive_seq=51546 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992935 heater_bed: target=80 temp=79.9 pwm=0.443 sd_pos=490822 sysload=0.18 cputime=104.040 memavail=7291072 print_time=2145.559 buffer_time=2.077 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 790612.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2212176 bytes_read=749674 bytes_retransmit=9 bytes_invalid=0 send_seq=51583 receive_seq=51583 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992928 heater_bed: target=80 temp=79.9 pwm=0.443 sd_pos=491082 sysload=0.18 cputime=104.098 memavail=7291072 print_time=2148.060 buffer_time=3.577 print_stall=0 extruder: target=240 temp=240.3 pwm=0.359
Stats 790613.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2212419 bytes_read=750042 bytes_retransmit=9 bytes_invalid=0 send_seq=51598 receive_seq=51598 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992922 heater_bed: target=80 temp=80.0 pwm=0.332 sd_pos=491082 sysload=0.17 cputime=104.148 memavail=7291076 print_time=2148.060 buffer_time=2.576 print_stall=0 extruder: target=240 temp=240.0 pwm=0.495
Stats 790614.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2212854 bytes_read=750420 bytes_retransmit=9 bytes_invalid=0 send_seq=51615 receive_seq=51615 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992915 heater_bed: target=80 temp=80.0 pwm=0.350 sd_pos=491110 sysload=0.17 cputime=104.199 memavail=7291076 print_time=2149.583 buffer_time=3.098 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 790615.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2213080 bytes_read=750785 bytes_retransmit=9 bytes_invalid=0 send_seq=51631 receive_seq=51631 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992906 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=491110 sysload=0.17 cputime=104.247 memavail=7291076 print_time=2149.583 buffer_time=2.097 print_stall=0 extruder: target=240 temp=239.8 pwm=0.542
Stats 790616.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2213370 bytes_read=751126 bytes_retransmit=9 bytes_invalid=0 send_seq=51645 receive_seq=51645 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992900 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=491138 sysload=0.17 cputime=104.296 memavail=7291076 print_time=2150.528 buffer_time=2.042 print_stall=0 extruder: target=240 temp=239.7 pwm=0.610
Stats 790617.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2214303 bytes_read=751536 bytes_retransmit=9 bytes_invalid=0 send_seq=51669 receive_seq=51669 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992897 heater_bed: target=80 temp=80.0 pwm=0.379 sd_pos=491138 sysload=0.17 cputime=104.344 memavail=7291076 print_time=2151.593 buffer_time=2.106 print_stall=0 extruder: target=240 temp=240.1 pwm=0.406
Stats 790618.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2214940 bytes_read=751948 bytes_retransmit=9 bytes_invalid=0 send_seq=51690 receive_seq=51690 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=491295 sysload=0.24 cputime=104.406 memavail=7291372 print_time=2153.786 buffer_time=3.298 print_stall=0 extruder: target=240 temp=240.3 pwm=0.325
Stats 790619.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2215129 bytes_read=752291 bytes_retransmit=9 bytes_invalid=0 send_seq=51703 receive_seq=51703 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=491295 sysload=0.24 cputime=104.455 memavail=7291552 print_time=2153.786 buffer_time=2.297 print_stall=0 extruder: target=240 temp=239.9 pwm=0.542
Stats 790620.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2216035 bytes_read=752699 bytes_retransmit=9 bytes_invalid=0 send_seq=51726 receive_seq=51726 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992891 heater_bed: target=80 temp=80.0 pwm=0.362 sd_pos=491479 sysload=0.24 cputime=104.514 memavail=7291552 print_time=2154.502 buffer_time=2.013 print_stall=0 extruder: target=240 temp=240.4 pwm=0.368
Stats 790621.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2216451 bytes_read=753076 bytes_retransmit=9 bytes_invalid=0 send_seq=51743 receive_seq=51743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992886 heater_bed: target=80 temp=80.0 pwm=0.362 sd_pos=491536 sysload=0.24 cputime=104.565 memavail=7291556 print_time=2155.669 buffer_time=2.179 print_stall=0 extruder: target=240 temp=240.1 pwm=0.515
Stats 790622.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2217762 bytes_read=753504 bytes_retransmit=9 bytes_invalid=0 send_seq=51773 receive_seq=51773 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992919 heater_bed: target=80 temp=80.1 pwm=0.362 sd_pos=491664 sysload=0.24 cputime=104.613 memavail=7292000 print_time=2156.739 buffer_time=2.248 print_stall=0 extruder: target=240 temp=239.9 pwm=0.538
Stats 790623.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2221357 bytes_read=754157 bytes_retransmit=9 bytes_invalid=0 send_seq=51842 receive_seq=51842 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119992915 heater_bed: target=80 temp=80.1 pwm=0.353 sd_pos=492411 sysload=0.22 cputime=104.677 memavail=7292316 print_time=2157.705 buffer_time=2.214 print_stall=0 extruder: target=240 temp=239.9 pwm=0.525
Stats 790624.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2224778 bytes_read=754769 bytes_retransmit=9 bytes_invalid=0 send_seq=51906 receive_seq=51906 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992920 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=493076 sysload=0.22 cputime=104.749 memavail=7292316 print_time=2158.538 buffer_time=2.045 print_stall=0 extruder: target=240 temp=240.1 pwm=0.448
Stats 790625.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2228000 bytes_read=755352 bytes_retransmit=9 bytes_invalid=0 send_seq=51967 receive_seq=51967 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992977 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=493386 sysload=0.22 cputime=104.815 memavail=7292316 print_time=2159.508 buffer_time=2.013 print_stall=0 extruder: target=240 temp=239.9 pwm=0.500
Stats 790626.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2231844 bytes_read=756005 bytes_retransmit=9 bytes_invalid=0 send_seq=52039 receive_seq=52039 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119992968 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=493842 sysload=0.22 cputime=104.889 memavail=7292092 print_time=2160.697 buffer_time=2.201 print_stall=0 extruder: target=240 temp=240.1 pwm=0.514
Stats 790627.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2235186 bytes_read=756612 bytes_retransmit=9 bytes_invalid=0 send_seq=52102 receive_seq=52102 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119992966 heater_bed: target=80 temp=80.1 pwm=0.387 sd_pos=494909 sysload=0.22 cputime=104.983 memavail=7292092 print_time=2161.700 buffer_time=2.203 print_stall=0 extruder: target=240 temp=240.2 pwm=0.386
Stats 790628.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2238737 bytes_read=757246 bytes_retransmit=9 bytes_invalid=0 send_seq=52170 receive_seq=52170 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992956 heater_bed: target=80 temp=80.0 pwm=0.375 sd_pos=495977 sysload=0.20 cputime=105.067 memavail=7292092 print_time=2162.615 buffer_time=2.117 print_stall=0 extruder: target=240 temp=240.0 pwm=0.487
Stats 790629.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2242488 bytes_read=757879 bytes_retransmit=9 bytes_invalid=0 send_seq=52238 receive_seq=52238 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992944 heater_bed: target=80 temp=80.0 pwm=0.449 sd_pos=496659 sysload=0.20 cputime=105.149 memavail=7291868 print_time=2163.617 buffer_time=2.118 print_stall=0 extruder: target=240 temp=240.1 pwm=0.429
Stats 790630.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2246455 bytes_read=758556 bytes_retransmit=9 bytes_invalid=0 send_seq=52315 receive_seq=52315 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992933 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=497843 sysload=0.20 cputime=105.231 memavail=7291868 print_time=2164.537 buffer_time=2.037 print_stall=0 extruder: target=240 temp=240.4 pwm=0.339
Stats 790631.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2250960 bytes_read=759249 bytes_retransmit=9 bytes_invalid=0 send_seq=52398 receive_seq=52398 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992961 heater_bed: target=80 temp=80.1 pwm=0.378 sd_pos=499346 sysload=0.20 cputime=105.318 memavail=7292028 print_time=2165.765 buffer_time=2.265 print_stall=0 extruder: target=240 temp=240.7 pwm=0.284
Stats 790632.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2255468 bytes_read=759957 bytes_retransmit=9 bytes_invalid=0 send_seq=52481 receive_seq=52481 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=300 freq=119992951 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=500393 sysload=0.20 cputime=105.415 memavail=7291396 print_time=2166.999 buffer_time=2.498 print_stall=0 extruder: target=240 temp=240.3 pwm=0.452
Stats 790633.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2258293 bytes_read=760545 bytes_retransmit=9 bytes_invalid=0 send_seq=52537 receive_seq=52537 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992941 heater_bed: target=80 temp=80.1 pwm=0.344 sd_pos=501202 sysload=0.26 cputime=105.500 memavail=7291400 print_time=2167.594 buffer_time=2.092 print_stall=0 extruder: target=240 temp=239.9 pwm=0.593
Stats 790634.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2263048 bytes_read=761253 bytes_retransmit=9 bytes_invalid=0 send_seq=52623 receive_seq=52623 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992934 heater_bed: target=80 temp=80.1 pwm=0.404 sd_pos=502618 sysload=0.26 cputime=105.595 memavail=7291400 print_time=2168.825 buffer_time=2.323 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 790635.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2266174 bytes_read=761846 bytes_retransmit=9 bytes_invalid=0 send_seq=52683 receive_seq=52683 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992933 heater_bed: target=80 temp=80.1 pwm=0.350 sd_pos=503627 sysload=0.26 cputime=105.675 memavail=7291400 print_time=2169.624 buffer_time=2.121 print_stall=0 extruder: target=240 temp=239.6 pwm=0.620
Stats 790636.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2269535 bytes_read=762453 bytes_retransmit=9 bytes_invalid=0 send_seq=52746 receive_seq=52746 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992924 heater_bed: target=80 temp=80.1 pwm=0.350 sd_pos=504669 sysload=0.26 cputime=105.762 memavail=7291112 print_time=2170.507 buffer_time=2.003 print_stall=0 extruder: target=240 temp=240.1 pwm=0.448
Stats 790637.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2273672 bytes_read=763116 bytes_retransmit=9 bytes_invalid=0 send_seq=52823 receive_seq=52823 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992953 heater_bed: target=80 temp=80.1 pwm=0.314 sd_pos=506083 sysload=0.26 cputime=105.856 memavail=7291208 print_time=2171.619 buffer_time=2.115 print_stall=0 extruder: target=240 temp=240.2 pwm=0.376
Stats 790638.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2277339 bytes_read=763775 bytes_retransmit=9 bytes_invalid=0 send_seq=52893 receive_seq=52893 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992953 heater_bed: target=80 temp=80.1 pwm=0.380 sd_pos=507093 sysload=0.24 cputime=105.949 memavail=7291208 print_time=2172.590 buffer_time=2.084 print_stall=0 extruder: target=240 temp=240.2 pwm=0.450
Stats 790639.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2281555 bytes_read=764457 bytes_retransmit=9 bytes_invalid=0 send_seq=52971 receive_seq=52971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992942 heater_bed: target=80 temp=80.1 pwm=0.402 sd_pos=508452 sysload=0.24 cputime=106.042 memavail=7291208 print_time=2173.702 buffer_time=2.197 print_stall=0 extruder: target=240 temp=240.1 pwm=0.500
Stats 790640.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2284832 bytes_read=765045 bytes_retransmit=9 bytes_invalid=0 send_seq=53033 receive_seq=53033 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992943 heater_bed: target=80 temp=80.1 pwm=0.365 sd_pos=509482 sysload=0.24 cputime=106.119 memavail=7291208 print_time=2174.566 buffer_time=2.059 print_stall=0 extruder: target=240 temp=239.9 pwm=0.557
Stats 790641.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2289250 bytes_read=765743 bytes_retransmit=9 bytes_invalid=0 send_seq=53114 receive_seq=53114 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992933 heater_bed: target=80 temp=80.1 pwm=0.388 sd_pos=510792 sysload=0.24 cputime=106.205 memavail=7291208 print_time=2175.785 buffer_time=2.278 print_stall=0 extruder: target=240 temp=239.8 pwm=0.547
Stats 790642.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2292495 bytes_read=766360 bytes_retransmit=9 bytes_invalid=0 send_seq=53179 receive_seq=53179 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=80.1 pwm=0.366 sd_pos=511741 sysload=0.24 cputime=106.290 memavail=7290228 print_time=2176.600 buffer_time=2.093 print_stall=0 extruder: target=240 temp=239.6 pwm=0.604
Stats 790643.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2296128 bytes_read=767004 bytes_retransmit=9 bytes_invalid=0 send_seq=53249 receive_seq=53249 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992909 heater_bed: target=80 temp=80.1 pwm=0.366 sd_pos=512829 sysload=0.22 cputime=106.372 memavail=7290512 print_time=2177.531 buffer_time=2.023 print_stall=0 extruder: target=240 temp=239.6 pwm=0.626
Stats 790644.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2300167 bytes_read=767672 bytes_retransmit=9 bytes_invalid=0 send_seq=53324 receive_seq=53324 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119992900 heater_bed: target=80 temp=80.1 pwm=0.422 sd_pos=514167 sysload=0.22 cputime=106.458 memavail=7290512 print_time=2178.643 buffer_time=2.135 print_stall=0 extruder: target=240 temp=239.8 pwm=0.533
Stats 790645.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2304257 bytes_read=768339 bytes_retransmit=9 bytes_invalid=0 send_seq=53399 receive_seq=53399 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992945 heater_bed: target=80 temp=80.1 pwm=0.477 sd_pos=515423 sysload=0.22 cputime=106.545 memavail=7290512 print_time=2179.794 buffer_time=2.285 print_stall=0 extruder: target=240 temp=239.7 pwm=0.533
Stats 790646.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2307809 bytes_read=768947 bytes_retransmit=9 bytes_invalid=0 send_seq=53465 receive_seq=53465 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992950 heater_bed: target=80 temp=80.1 pwm=0.468 sd_pos=516511 sysload=0.22 cputime=106.620 memavail=7290512 print_time=2180.725 buffer_time=2.215 print_stall=0 extruder: target=240 temp=240.0 pwm=0.444
Stats 790647.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2310968 bytes_read=769545 bytes_retransmit=9 bytes_invalid=0 send_seq=53526 receive_seq=53526 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992942 heater_bed: target=80 temp=80.1 pwm=0.492 sd_pos=517515 sysload=0.22 cputime=106.708 memavail=7296072 print_time=2181.604 buffer_time=2.094 print_stall=0 extruder: target=240 temp=239.9 pwm=0.501
Stats 790648.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2314680 bytes_read=770198 bytes_retransmit=9 bytes_invalid=0 send_seq=53595 receive_seq=53595 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992938 heater_bed: target=80 temp=80.1 pwm=0.396 sd_pos=518865 sysload=0.21 cputime=106.786 memavail=7296256 print_time=2182.682 buffer_time=2.172 print_stall=0 extruder: target=240 temp=239.8 pwm=0.553
Stats 790649.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2317798 bytes_read=770771 bytes_retransmit=9 bytes_invalid=0 send_seq=53654 receive_seq=53654 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992952 heater_bed: target=80 temp=80.1 pwm=0.398 sd_pos=519908 sysload=0.21 cputime=106.862 memavail=7296256 print_time=2183.583 buffer_time=2.072 print_stall=0 extruder: target=240 temp=240.0 pwm=0.518
Stats 790650.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2321853 bytes_read=771428 bytes_retransmit=9 bytes_invalid=0 send_seq=53727 receive_seq=53727 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992943 heater_bed: target=80 temp=80.0 pwm=0.570 sd_pos=521134 sysload=0.21 cputime=106.937 memavail=7296256 print_time=2184.813 buffer_time=2.300 print_stall=0 extruder: target=240 temp=239.8 pwm=0.518
Stats 790651.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2325607 bytes_read=772068 bytes_retransmit=9 bytes_invalid=0 send_seq=53798 receive_seq=53798 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992932 heater_bed: target=80 temp=80.0 pwm=0.536 sd_pos=522174 sysload=0.21 cputime=107.018 memavail=7296256 print_time=2186.366 buffer_time=2.853 print_stall=0 extruder: target=240 temp=240.0 pwm=0.518
Stats 790652.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2326412 bytes_read=772444 bytes_retransmit=9 bytes_invalid=0 send_seq=53819 receive_seq=53819 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992927 heater_bed: target=80 temp=80.0 pwm=0.524 sd_pos=522231 sysload=0.21 cputime=107.063 memavail=7295500 print_time=2187.295 buffer_time=2.782 print_stall=0 extruder: target=240 temp=240.1 pwm=0.418
Stats 790653.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2327827 bytes_read=772920 bytes_retransmit=9 bytes_invalid=0 send_seq=53853 receive_seq=53853 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=522463 sysload=0.19 cputime=107.123 memavail=7295500 print_time=2188.993 buffer_time=3.479 print_stall=0 extruder: target=240 temp=240.3 pwm=0.352
Stats 790654.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2328053 bytes_read=773292 bytes_retransmit=9 bytes_invalid=0 send_seq=53869 receive_seq=53869 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=522463 sysload=0.19 cputime=107.168 memavail=7295500 print_time=2188.993 buffer_time=2.478 print_stall=0 extruder: target=240 temp=240.4 pwm=0.354
Stats 790655.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2328489 bytes_read=773650 bytes_retransmit=9 bytes_invalid=0 send_seq=53885 receive_seq=53885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=522492 sysload=0.19 cputime=107.215 memavail=7295500 print_time=2190.517 buffer_time=3.001 print_stall=0 extruder: target=240 temp=240.2 pwm=0.497
Stats 790656.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2328684 bytes_read=774024 bytes_retransmit=9 bytes_invalid=0 send_seq=53899 receive_seq=53899 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=79.9 pwm=0.508 sd_pos=522492 sysload=0.19 cputime=107.263 memavail=7295500 print_time=2190.517 buffer_time=2.000 print_stall=0 extruder: target=240 temp=240.1 pwm=0.536
Stats 790657.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2329322 bytes_read=774416 bytes_retransmit=9 bytes_invalid=0 send_seq=53919 receive_seq=53919 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992916 heater_bed: target=80 temp=79.9 pwm=0.508 sd_pos=522519 sysload=0.19 cputime=107.319 memavail=7295500 print_time=2192.014 buffer_time=2.497 print_stall=0 extruder: target=240 temp=240.0 pwm=0.578
Stats 790658.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=2329912 bytes_read=774804 bytes_retransmit=9 bytes_invalid=0 send_seq=53938 receive_seq=53938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992909 heater_bed: target=80 temp=79.9 pwm=0.431 sd_pos=522519 sysload=0.17 cputime=107.374 memavail=7295500 print_time=2193.069 buffer_time=2.551 print_stall=0 extruder: target=240 temp=240.0 pwm=0.566
Stats 790659.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=2330444 bytes_read=775192 bytes_retransmit=9 bytes_invalid=0 send_seq=53957 receive_seq=53957 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992902 heater_bed: target=80 temp=79.9 pwm=0.437 sd_pos=522663 sysload=0.17 cputime=107.424 memavail=7295500 print_time=2194.646 buffer_time=3.127 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 790660.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=2330638 bytes_read=775554 bytes_retransmit=9 bytes_invalid=0 send_seq=53971 receive_seq=53971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992897 heater_bed: target=80 temp=79.9 pwm=0.437 sd_pos=522663 sysload=0.17 cputime=107.465 memavail=7295504 print_time=2194.646 buffer_time=2.126 print_stall=0 extruder: target=240 temp=240.3 pwm=0.336
Stats 790661.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=2331585 bytes_read=775952 bytes_retransmit=9 bytes_invalid=0 send_seq=53995 receive_seq=53995 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992894 heater_bed: target=80 temp=79.9 pwm=0.380 sd_pos=522836 sysload=0.17 cputime=107.522 memavail=7295504 print_time=2195.650 buffer_time=2.129 print_stall=0 extruder: target=240 temp=240.4 pwm=0.343
Stats 790662.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=2332992 bytes_read=776405 bytes_retransmit=9 bytes_invalid=0 send_seq=54027 receive_seq=54027 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992889 heater_bed: target=80 temp=80.0 pwm=0.380 sd_pos=523094 sysload=0.17 cputime=107.576 memavail=7295000 print_time=2197.525 buffer_time=3.004 print_stall=0 extruder: target=240 temp=240.1 pwm=0.495
Stats 790663.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2333221 bytes_read=776787 bytes_retransmit=9 bytes_invalid=0 send_seq=54042 receive_seq=54042 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=523094 sysload=0.16 cputime=107.624 memavail=7295256 print_time=2197.525 buffer_time=2.003 print_stall=0 extruder: target=240 temp=239.9 pwm=0.576
Stats 790664.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2334526 bytes_read=777210 bytes_retransmit=9 bytes_invalid=0 send_seq=54071 receive_seq=54071 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992876 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=523354 sysload=0.16 cputime=107.676 memavail=7295256 print_time=2198.682 buffer_time=2.160 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 790665.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2335955 bytes_read=777673 bytes_retransmit=9 bytes_invalid=0 send_seq=54105 receive_seq=54105 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992872 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=523557 sysload=0.16 cputime=107.729 memavail=7295256 print_time=2200.422 buffer_time=2.899 print_stall=0 extruder: target=240 temp=239.8 pwm=0.570
Stats 790666.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2336415 bytes_read=778060 bytes_retransmit=9 bytes_invalid=0 send_seq=54124 receive_seq=54124 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992913 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=523585 sysload=0.16 cputime=107.781 memavail=7295256 print_time=2201.945 buffer_time=3.420 print_stall=0 extruder: target=240 temp=239.7 pwm=0.594
Stats 790667.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2336585 bytes_read=778398 bytes_retransmit=9 bytes_invalid=0 send_seq=54136 receive_seq=54136 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992912 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=523585 sysload=0.16 cputime=107.821 memavail=7295256 print_time=2201.945 buffer_time=2.419 print_stall=0 extruder: target=240 temp=240.1 pwm=0.419
Stats 790668.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2336880 bytes_read=778781 bytes_retransmit=9 bytes_invalid=0 send_seq=54151 receive_seq=54151 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992903 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=523613 sysload=0.15 cputime=107.872 memavail=7295256 print_time=2202.890 buffer_time=2.364 print_stall=0 extruder: target=240 temp=240.0 pwm=0.511
Stats 790669.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2337799 bytes_read=779203 bytes_retransmit=9 bytes_invalid=0 send_seq=54177 receive_seq=54177 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992896 heater_bed: target=80 temp=80.0 pwm=0.536 sd_pos=523613 sysload=0.15 cputime=107.926 memavail=7295256 print_time=2203.955 buffer_time=2.428 print_stall=0 extruder: target=240 temp=240.0 pwm=0.532
Stats 790670.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2338480 bytes_read=779586 bytes_retransmit=9 bytes_invalid=0 send_seq=54198 receive_seq=54198 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992889 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=523758 sysload=0.15 cputime=107.982 memavail=7295256 print_time=2206.148 buffer_time=3.621 print_stall=0 extruder: target=240 temp=239.9 pwm=0.563
Stats 790671.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2338676 bytes_read=779944 bytes_retransmit=9 bytes_invalid=0 send_seq=54211 receive_seq=54211 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992881 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=523758 sysload=0.15 cputime=108.033 memavail=7295260 print_time=2206.148 buffer_time=2.621 print_stall=0 extruder: target=240 temp=239.9 pwm=0.503
Stats 790672.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2339473 bytes_read=780356 bytes_retransmit=9 bytes_invalid=0 send_seq=54235 receive_seq=54235 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992877 heater_bed: target=80 temp=80.0 pwm=0.370 sd_pos=523930 sysload=0.15 cputime=108.087 memavail=7295008 print_time=2206.567 buffer_time=2.039 print_stall=0 extruder: target=240 temp=240.1 pwm=0.403
Stats 790673.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2339992 bytes_read=780734 bytes_retransmit=9 bytes_invalid=0 send_seq=54252 receive_seq=54252 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=523987 sysload=0.13 cputime=108.145 memavail=7293748 print_time=2208.031 buffer_time=2.502 print_stall=0 extruder: target=240 temp=240.0 pwm=0.486
Stats 790674.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2341282 bytes_read=781172 bytes_retransmit=9 bytes_invalid=0 send_seq=54281 receive_seq=54281 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992873 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=524103 sysload=0.13 cputime=108.204 memavail=7293908 print_time=2209.101 buffer_time=2.572 print_stall=0 extruder: target=240 temp=240.1 pwm=0.486
Stats 790675.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2343923 bytes_read=781739 bytes_retransmit=9 bytes_invalid=0 send_seq=54336 receive_seq=54336 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992865 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=524441 sysload=0.13 cputime=108.270 memavail=7294004 print_time=2209.794 buffer_time=2.265 print_stall=0 extruder: target=240 temp=240.1 pwm=0.436
Stats 790676.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2347440 bytes_read=782347 bytes_retransmit=9 bytes_invalid=0 send_seq=54402 receive_seq=54402 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992866 heater_bed: target=80 temp=80.0 pwm=0.349 sd_pos=525401 sysload=0.13 cputime=108.350 memavail=7294004 print_time=2210.702 buffer_time=2.172 print_stall=0 extruder: target=240 temp=240.1 pwm=0.488
Stats 790677.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2352248 bytes_read=783075 bytes_retransmit=9 bytes_invalid=0 send_seq=54489 receive_seq=54489 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=112 freq=119992867 heater_bed: target=80 temp=80.0 pwm=0.376 sd_pos=526340 sysload=0.13 cputime=108.442 memavail=7293516 print_time=2212.022 buffer_time=2.490 print_stall=0 extruder: target=240 temp=240.2 pwm=0.394
Stats 790678.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2355791 bytes_read=783713 bytes_retransmit=9 bytes_invalid=0 send_seq=54555 receive_seq=54555 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119992861 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=526808 sysload=0.12 cputime=108.513 memavail=7293516 print_time=2212.883 buffer_time=2.352 print_stall=0 extruder: target=240 temp=240.1 pwm=0.454
Stats 790679.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2358688 bytes_read=784276 bytes_retransmit=9 bytes_invalid=0 send_seq=54612 receive_seq=54612 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=80.0 pwm=0.510 sd_pos=527555 sysload=0.12 cputime=108.584 memavail=7293516 print_time=2213.564 buffer_time=2.032 print_stall=0 extruder: target=240 temp=239.9 pwm=0.556
Stats 790680.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2363407 bytes_read=785004 bytes_retransmit=9 bytes_invalid=0 send_seq=54699 receive_seq=54699 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992860 heater_bed: target=80 temp=80.0 pwm=0.326 sd_pos=528818 sysload=0.12 cputime=108.670 memavail=7293516 print_time=2214.770 buffer_time=2.235 print_stall=0 extruder: target=240 temp=239.7 pwm=0.588
Stats 790681.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2367082 bytes_read=785646 bytes_retransmit=9 bytes_invalid=0 send_seq=54769 receive_seq=54769 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=529769 sysload=0.12 cputime=108.751 memavail=7293516 print_time=2215.651 buffer_time=2.116 print_stall=0 extruder: target=240 temp=240.1 pwm=0.406
Stats 790682.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2370528 bytes_read=786239 bytes_retransmit=9 bytes_invalid=0 send_seq=54832 receive_seq=54832 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=530745 sysload=0.12 cputime=108.820 memavail=7293516 print_time=2216.557 buffer_time=2.022 print_stall=0 extruder: target=240 temp=240.3 pwm=0.406
Stats 790683.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2374431 bytes_read=786913 bytes_retransmit=9 bytes_invalid=0 send_seq=54905 receive_seq=54905 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992852 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=531750 sysload=0.11 cputime=108.890 memavail=7292764 print_time=2217.579 buffer_time=2.042 print_stall=0 extruder: target=240 temp=240.6 pwm=0.302
Stats 790684.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2378149 bytes_read=787550 bytes_retransmit=9 bytes_invalid=0 send_seq=54974 receive_seq=54974 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=80.0 pwm=0.381 sd_pos=532765 sysload=0.11 cputime=108.966 memavail=7292764 print_time=2218.600 buffer_time=2.063 print_stall=0 extruder: target=240 temp=240.3 pwm=0.433
Stats 790685.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2381980 bytes_read=788183 bytes_retransmit=9 bytes_invalid=0 send_seq=55045 receive_seq=55045 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992872 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=533818 sysload=0.11 cputime=109.049 memavail=7292764 print_time=2219.681 buffer_time=2.142 print_stall=0 extruder: target=240 temp=240.1 pwm=0.500
Stats 790686.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2385272 bytes_read=788794 bytes_retransmit=9 bytes_invalid=0 send_seq=55109 receive_seq=55109 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992866 heater_bed: target=80 temp=80.0 pwm=0.515 sd_pos=534818 sysload=0.11 cputime=109.124 memavail=7292764 print_time=2220.557 buffer_time=2.018 print_stall=0 extruder: target=240 temp=240.2 pwm=0.441
Stats 790687.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2389909 bytes_read=789507 bytes_retransmit=9 bytes_invalid=0 send_seq=55195 receive_seq=55195 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=536182 sysload=0.11 cputime=109.218 memavail=7292764 print_time=2221.749 buffer_time=2.208 print_stall=0 extruder: target=240 temp=240.0 pwm=0.491
Stats 790688.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2393369 bytes_read=790119 bytes_retransmit=9 bytes_invalid=0 send_seq=55260 receive_seq=55260 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992909 heater_bed: target=80 temp=80.0 pwm=0.310 sd_pos=537245 sysload=0.10 cputime=109.313 memavail=7292764 print_time=2222.633 buffer_time=2.091 print_stall=0 extruder: target=240 temp=239.8 pwm=0.529
Stats 790689.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2398276 bytes_read=790862 bytes_retransmit=9 bytes_invalid=0 send_seq=55350 receive_seq=55350 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992902 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=538564 sysload=0.10 cputime=109.416 memavail=7292764 print_time=2223.884 buffer_time=2.341 print_stall=0 extruder: target=240 temp=239.9 pwm=0.529
Stats 790690.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2401923 bytes_read=791504 bytes_retransmit=9 bytes_invalid=0 send_seq=55420 receive_seq=55420 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992900 heater_bed: target=80 temp=80.1 pwm=0.332 sd_pos=539612 sysload=0.10 cputime=109.500 memavail=7292764 print_time=2224.760 buffer_time=2.217 print_stall=0 extruder: target=240 temp=240.1 pwm=0.455
Stats 790691.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2405595 bytes_read=792122 bytes_retransmit=9 bytes_invalid=0 send_seq=55488 receive_seq=55488 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992898 heater_bed: target=80 temp=80.1 pwm=0.349 sd_pos=540674 sysload=0.10 cputime=109.581 memavail=7292764 print_time=2225.644 buffer_time=2.099 print_stall=0 extruder: target=240 temp=240.2 pwm=0.397
Stats 790692.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2409951 bytes_read=792750 bytes_retransmit=9 bytes_invalid=0 send_seq=55567 receive_seq=55555 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=266 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=80.1 pwm=0.399 sd_pos=542035 sysload=0.10 cputime=109.672 memavail=7292764 print_time=2226.836 buffer_time=2.284 print_stall=0 extruder: target=240 temp=240.0 pwm=0.527
Stats 790693.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2413800 bytes_read=793483 bytes_retransmit=9 bytes_invalid=0 send_seq=55640 receive_seq=55640 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992884 heater_bed: target=80 temp=80.1 pwm=0.402 sd_pos=543061 sysload=0.10 cputime=109.758 memavail=7292768 print_time=2227.732 buffer_time=2.180 print_stall=0 extruder: target=240 temp=240.2 pwm=0.393
Stats 790694.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2417229 bytes_read=794081 bytes_retransmit=9 bytes_invalid=0 send_seq=55704 receive_seq=55704 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992879 heater_bed: target=80 temp=80.1 pwm=0.390 sd_pos=543943 sysload=0.10 cputime=109.840 memavail=7292768 print_time=2228.652 buffer_time=2.099 print_stall=0 extruder: target=240 temp=239.7 pwm=0.613
Stats 790695.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2421169 bytes_read=794674 bytes_retransmit=9 bytes_invalid=0 send_seq=55776 receive_seq=55764 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=324 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=545304 sysload=0.10 cputime=109.929 memavail=7292768 print_time=2229.844 buffer_time=2.290 print_stall=0 extruder: target=240 temp=239.6 pwm=0.631
Stats 790696.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2425041 bytes_read=795391 bytes_retransmit=9 bytes_invalid=0 send_seq=55849 receive_seq=55849 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=546330 sysload=0.10 cputime=110.011 memavail=7292544 print_time=2230.728 buffer_time=2.173 print_stall=0 extruder: target=240 temp=240.0 pwm=0.449
Stats 790697.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2428698 bytes_read=796014 bytes_retransmit=9 bytes_invalid=0 send_seq=55918 receive_seq=55918 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992920 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=547386 sysload=0.10 cputime=110.092 memavail=7292320 print_time=2231.624 buffer_time=2.069 print_stall=0 extruder: target=240 temp=239.8 pwm=0.593
Stats 790698.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2433628 bytes_read=796768 bytes_retransmit=9 bytes_invalid=0 send_seq=56007 receive_seq=56007 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=938 freq=119992913 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=548658 sysload=0.09 cputime=110.183 memavail=7292320 print_time=2233.121 buffer_time=2.565 print_stall=0 extruder: target=240 temp=240.0 pwm=0.514
Stats 790699.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2437057 bytes_read=797375 bytes_retransmit=9 bytes_invalid=0 send_seq=56070 receive_seq=56070 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992906 heater_bed: target=80 temp=80.0 pwm=0.367 sd_pos=549085 sysload=0.09 cputime=110.266 memavail=7292320 print_time=2233.781 buffer_time=2.223 print_stall=0 extruder: target=240 temp=239.8 pwm=0.540
Stats 790700.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2440101 bytes_read=797938 bytes_retransmit=9 bytes_invalid=0 send_seq=56127 receive_seq=56127 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992908 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=549663 sysload=0.09 cputime=110.337 memavail=7292320 print_time=2234.729 buffer_time=2.171 print_stall=0 extruder: target=240 temp=240.1 pwm=0.473
Stats 790701.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2443500 bytes_read=798565 bytes_retransmit=9 bytes_invalid=0 send_seq=56191 receive_seq=56191 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=550236 sysload=0.09 cputime=110.419 memavail=7293032 print_time=2235.772 buffer_time=2.213 print_stall=0 extruder: target=240 temp=239.8 pwm=0.555
Stats 790702.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2447003 bytes_read=799173 bytes_retransmit=9 bytes_invalid=0 send_seq=56257 receive_seq=56257 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992959 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=550663 sysload=0.09 cputime=110.481 memavail=7293032 print_time=2237.376 buffer_time=2.817 print_stall=0 extruder: target=240 temp=240.0 pwm=0.484
Stats 790703.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2448160 bytes_read=799607 bytes_retransmit=9 bytes_invalid=0 send_seq=56285 receive_seq=56285 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992944 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=551096 sysload=0.08 cputime=110.511 memavail=7293032 print_time=2238.675 buffer_time=3.115 print_stall=0 extruder: target=240 temp=240.0 pwm=0.484
Stats 790704.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2448385 bytes_read=799989 bytes_retransmit=9 bytes_invalid=0 send_seq=56300 receive_seq=56300 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992928 heater_bed: target=80 temp=80.0 pwm=0.547 sd_pos=551096 sysload=0.08 cputime=110.549 memavail=7293032 print_time=2238.675 buffer_time=2.115 print_stall=0 extruder: target=240 temp=239.8 pwm=0.581
Stats 790705.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2449040 bytes_read=800377 bytes_retransmit=9 bytes_invalid=0 send_seq=56322 receive_seq=56322 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992916 heater_bed: target=80 temp=80.0 pwm=0.308 sd_pos=551177 sysload=0.08 cputime=110.590 memavail=7293032 print_time=2240.587 buffer_time=3.026 print_stall=0 extruder: target=240 temp=240.2 pwm=0.423
Stats 790706.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2449245 bytes_read=800725 bytes_retransmit=9 bytes_invalid=0 send_seq=56336 receive_seq=56336 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=80.0 pwm=0.491 sd_pos=551177 sysload=0.08 cputime=110.634 memavail=7293032 print_time=2240.587 buffer_time=2.025 print_stall=0 extruder: target=240 temp=240.1 pwm=0.446
Stats 790707.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2450474 bytes_read=801187 bytes_retransmit=9 bytes_invalid=0 send_seq=56367 receive_seq=56367 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992921 heater_bed: target=80 temp=79.9 pwm=0.572 sd_pos=551608 sysload=0.08 cputime=110.704 memavail=7293032 print_time=2242.669 buffer_time=3.106 print_stall=0 extruder: target=240 temp=240.3 pwm=0.374
Stats 790708.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2450647 bytes_read=801540 bytes_retransmit=9 bytes_invalid=0 send_seq=56379 receive_seq=56379 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992912 heater_bed: target=80 temp=79.9 pwm=0.511 sd_pos=551608 sysload=0.15 cputime=110.750 memavail=7292808 print_time=2242.669 buffer_time=2.105 print_stall=0 extruder: target=240 temp=240.1 pwm=0.464
Stats 790709.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2452501 bytes_read=802008 bytes_retransmit=9 bytes_invalid=0 send_seq=56417 receive_seq=56417 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992909 heater_bed: target=80 temp=79.9 pwm=0.460 sd_pos=551775 sysload=0.15 cputime=110.815 memavail=7292552 print_time=2244.257 buffer_time=2.692 print_stall=0 extruder: target=240 temp=240.1 pwm=0.525
Stats 790710.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2453485 bytes_read=802450 bytes_retransmit=9 bytes_invalid=0 send_seq=56444 receive_seq=56444 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992903 heater_bed: target=80 temp=79.9 pwm=0.475 sd_pos=551775 sysload=0.15 cputime=110.868 memavail=7292552 print_time=2245.006 buffer_time=2.440 print_stall=0 extruder: target=240 temp=239.8 pwm=0.581
Stats 790711.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2454074 bytes_read=802828 bytes_retransmit=9 bytes_invalid=0 send_seq=56464 receive_seq=56464 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=79.9 pwm=0.475 sd_pos=552291 sysload=0.15 cputime=110.924 memavail=7292552 print_time=2245.628 buffer_time=2.062 print_stall=0 extruder: target=240 temp=240.2 pwm=0.414
Stats 790712.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2454924 bytes_read=803221 bytes_retransmit=9 bytes_invalid=0 send_seq=56487 receive_seq=56487 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992893 heater_bed: target=80 temp=79.9 pwm=0.484 sd_pos=552664 sysload=0.15 cputime=110.983 memavail=7292552 print_time=2246.682 buffer_time=2.115 print_stall=0 extruder: target=240 temp=239.8 pwm=0.566
Stats 790713.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2455325 bytes_read=803633 bytes_retransmit=9 bytes_invalid=0 send_seq=56505 receive_seq=56505 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992887 heater_bed: target=80 temp=79.9 pwm=0.470 sd_pos=552720 sysload=0.14 cputime=111.036 memavail=7292556 print_time=2247.780 buffer_time=2.213 print_stall=0 extruder: target=240 temp=239.9 pwm=0.512
Stats 790714.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2456188 bytes_read=804031 bytes_retransmit=9 bytes_invalid=0 send_seq=56529 receive_seq=56529 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992879 heater_bed: target=80 temp=79.9 pwm=0.496 sd_pos=552720 sysload=0.14 cputime=111.082 memavail=7292556 print_time=2248.640 buffer_time=2.072 print_stall=0 extruder: target=240 temp=240.1 pwm=0.435
Stats 790715.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2456656 bytes_read=804389 bytes_retransmit=9 bytes_invalid=0 send_seq=56545 receive_seq=56545 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992934 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=553122 sysload=0.14 cputime=111.132 memavail=7292556 print_time=2249.868 buffer_time=2.299 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 790716.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2458226 bytes_read=804887 bytes_retransmit=9 bytes_invalid=0 send_seq=56581 receive_seq=56581 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992922 heater_bed: target=80 temp=79.9 pwm=0.493 sd_pos=553814 sysload=0.14 cputime=111.201 memavail=7292556 print_time=2251.399 buffer_time=2.829 print_stall=0 extruder: target=240 temp=239.9 pwm=0.562
Stats 790717.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2459718 bytes_read=805335 bytes_retransmit=9 bytes_invalid=0 send_seq=56615 receive_seq=56615 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992913 heater_bed: target=80 temp=79.9 pwm=0.353 sd_pos=553979 sysload=0.14 cputime=111.263 memavail=7292556 print_time=2251.852 buffer_time=2.281 print_stall=0 extruder: target=240 temp=239.8 pwm=0.569
Stats 790718.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2460863 bytes_read=805768 bytes_retransmit=9 bytes_invalid=0 send_seq=56643 receive_seq=56643 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992907 heater_bed: target=80 temp=80.0 pwm=0.354 sd_pos=554120 sysload=0.13 cputime=111.317 memavail=7292556 print_time=2252.866 buffer_time=2.295 print_stall=0 extruder: target=240 temp=239.9 pwm=0.462
Stats 790719.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2462184 bytes_read=806230 bytes_retransmit=9 bytes_invalid=0 send_seq=56674 receive_seq=56674 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992899 heater_bed: target=80 temp=80.0 pwm=0.354 sd_pos=554352 sysload=0.13 cputime=111.371 memavail=7292556 print_time=2254.565 buffer_time=2.993 print_stall=0 extruder: target=240 temp=239.7 pwm=0.534
Stats 790720.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2462610 bytes_read=806588 bytes_retransmit=9 bytes_invalid=0 send_seq=56690 receive_seq=56690 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992891 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=554381 sysload=0.13 cputime=111.416 memavail=7292556 print_time=2256.088 buffer_time=3.516 print_stall=0 extruder: target=240 temp=240.0 pwm=0.472
Stats 790721.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2462799 bytes_read=806921 bytes_retransmit=9 bytes_invalid=0 send_seq=56701 receive_seq=56701 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992885 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=554381 sysload=0.13 cputime=111.456 memavail=7292556 print_time=2256.088 buffer_time=2.515 print_stall=0 extruder: target=240 temp=240.1 pwm=0.379
Stats 790722.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2463094 bytes_read=807303 bytes_retransmit=9 bytes_invalid=0 send_seq=56717 receive_seq=56717 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992881 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=554408 sysload=0.13 cputime=111.509 memavail=7292556 print_time=2257.016 buffer_time=2.443 print_stall=0 extruder: target=240 temp=240.3 pwm=0.376
Stats 790723.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2463674 bytes_read=807689 bytes_retransmit=9 bytes_invalid=0 send_seq=56737 receive_seq=56737 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992926 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=554408 sysload=0.20 cputime=111.563 memavail=7292556 print_time=2257.585 buffer_time=2.011 print_stall=0 extruder: target=240 temp=239.8 pwm=0.584
Stats 790724.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2464268 bytes_read=808047 bytes_retransmit=9 bytes_invalid=0 send_seq=56754 receive_seq=56754 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992916 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=554408 sysload=0.20 cputime=111.610 memavail=7292556 print_time=2258.640 buffer_time=2.065 print_stall=0 extruder: target=240 temp=239.8 pwm=0.570
Stats 790725.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2464745 bytes_read=808439 bytes_retransmit=9 bytes_invalid=0 send_seq=56771 receive_seq=56771 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992908 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=554552 sysload=0.20 cputime=111.663 memavail=7292556 print_time=2260.217 buffer_time=2.642 print_stall=0 extruder: target=240 temp=240.1 pwm=0.495
Stats 790726.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2465482 bytes_read=808827 bytes_retransmit=9 bytes_invalid=0 send_seq=56793 receive_seq=56793 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=79.9 pwm=0.472 sd_pos=554725 sysload=0.20 cputime=111.719 memavail=7292556 print_time=2260.627 buffer_time=2.051 print_stall=0 extruder: target=240 temp=240.2 pwm=0.376
Stats 790727.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2466035 bytes_read=809195 bytes_retransmit=9 bytes_invalid=0 send_seq=56811 receive_seq=56811 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992915 heater_bed: target=80 temp=79.9 pwm=0.457 sd_pos=554782 sysload=0.20 cputime=111.781 memavail=7292556 print_time=2262.072 buffer_time=2.496 print_stall=0 extruder: target=240 temp=240.0 pwm=0.540
Stats 790728.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2467327 bytes_read=809677 bytes_retransmit=9 bytes_invalid=0 send_seq=56843 receive_seq=56843 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992903 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=554983 sysload=0.26 cputime=111.842 memavail=7292556 print_time=2263.097 buffer_time=2.520 print_stall=0 extruder: target=240 temp=240.0 pwm=0.527
Stats 790729.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2468619 bytes_read=810110 bytes_retransmit=9 bytes_invalid=0 send_seq=56874 receive_seq=56874 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992896 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=555242 sysload=0.26 cputime=111.897 memavail=7292556 print_time=2264.254 buffer_time=2.677 print_stall=0 extruder: target=240 temp=240.1 pwm=0.459
Stats 790730.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2470027 bytes_read=810563 bytes_retransmit=9 bytes_invalid=0 send_seq=56906 receive_seq=56906 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992886 heater_bed: target=80 temp=80.0 pwm=0.394 sd_pos=555445 sysload=0.26 cputime=111.959 memavail=7292556 print_time=2265.993 buffer_time=3.415 print_stall=0 extruder: target=240 temp=239.8 pwm=0.626
Stats 790731.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2470290 bytes_read=810935 bytes_retransmit=9 bytes_invalid=0 send_seq=56922 receive_seq=56922 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992881 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=555445 sysload=0.26 cputime=112.010 memavail=7292556 print_time=2265.993 buffer_time=2.415 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 790732.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2470753 bytes_read=811303 bytes_retransmit=9 bytes_invalid=0 send_seq=56940 receive_seq=56940 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=80.0 pwm=0.319 sd_pos=555485 sysload=0.26 cputime=112.067 memavail=7292556 print_time=2267.516 buffer_time=2.937 print_stall=0 extruder: target=240 temp=240.0 pwm=0.506
Stats 790733.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2470998 bytes_read=811676 bytes_retransmit=9 bytes_invalid=0 send_seq=56953 receive_seq=56953 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992869 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=555525 sysload=0.24 cputime=112.113 memavail=7292312 print_time=2268.461 buffer_time=2.881 print_stall=0 extruder: target=240 temp=240.0 pwm=0.512
Stats 790734.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2471581 bytes_read=812058 bytes_retransmit=9 bytes_invalid=0 send_seq=56971 receive_seq=56971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=555525 sysload=0.24 cputime=112.167 memavail=7292312 print_time=2269.066 buffer_time=2.486 print_stall=0 extruder: target=240 temp=240.1 pwm=0.530
Stats 790735.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2472173 bytes_read=812426 bytes_retransmit=9 bytes_invalid=0 send_seq=56989 receive_seq=56989 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=555525 sysload=0.24 cputime=112.220 memavail=7292312 print_time=2269.972 buffer_time=2.392 print_stall=0 extruder: target=240 temp=240.1 pwm=0.462
Stats 790736.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2472690 bytes_read=812804 bytes_retransmit=9 bytes_invalid=0 send_seq=57006 receive_seq=57006 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=555670 sysload=0.24 cputime=112.275 memavail=7292312 print_time=2271.719 buffer_time=3.139 print_stall=0 extruder: target=240 temp=240.1 pwm=0.462
Stats 790737.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2472884 bytes_read=813166 bytes_retransmit=9 bytes_invalid=0 send_seq=57020 receive_seq=57020 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992902 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=555670 sysload=0.24 cputime=112.321 memavail=7292312 print_time=2271.719 buffer_time=2.138 print_stall=0 extruder: target=240 temp=240.1 pwm=0.452
Stats 790738.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2473884 bytes_read=813589 bytes_retransmit=9 bytes_invalid=0 send_seq=57046 receive_seq=57046 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992891 heater_bed: target=80 temp=80.0 pwm=0.385 sd_pos=555842 sysload=0.22 cputime=112.409 memavail=7295116 print_time=2272.733 buffer_time=2.150 print_stall=0 extruder: target=240 temp=239.9 pwm=0.537
Stats 790739.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2474201 bytes_read=813947 bytes_retransmit=9 bytes_invalid=0 send_seq=57059 receive_seq=57059 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992885 heater_bed: target=80 temp=80.1 pwm=0.257 sd_pos=555899 sysload=0.22 cputime=112.470 memavail=7298104 print_time=2273.602 buffer_time=2.019 print_stall=0 extruder: target=240 temp=239.9 pwm=0.526
Stats 790740.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2475562 bytes_read=814404 bytes_retransmit=9 bytes_invalid=0 send_seq=57092 receive_seq=57092 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992890 heater_bed: target=80 temp=80.1 pwm=0.309 sd_pos=556015 sysload=0.22 cputime=112.538 memavail=7293580 print_time=2274.673 buffer_time=2.089 print_stall=0 extruder: target=240 temp=240.0 pwm=0.461
Stats 790741.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2478994 bytes_read=815007 bytes_retransmit=9 bytes_invalid=0 send_seq=57157 receive_seq=57157 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.1 pwm=0.485 sd_pos=556815 sysload=0.22 cputime=112.612 memavail=7292572 print_time=2275.610 buffer_time=2.024 print_stall=0 extruder: target=240 temp=240.1 pwm=0.461
Stats 790742.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2483608 bytes_read=815720 bytes_retransmit=9 bytes_invalid=0 send_seq=57241 receive_seq=57241 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992875 heater_bed: target=80 temp=80.1 pwm=0.451 sd_pos=558393 sysload=0.22 cputime=112.691 memavail=7298588 print_time=2276.788 buffer_time=2.202 print_stall=0 extruder: target=240 temp=240.0 pwm=0.561
Stats 790743.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2487734 bytes_read=816398 bytes_retransmit=9 bytes_invalid=0 send_seq=57315 receive_seq=57315 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=80.1 pwm=0.379 sd_pos=559008 sysload=0.20 cputime=112.775 memavail=7296852 print_time=2277.807 buffer_time=2.220 print_stall=0 extruder: target=240 temp=239.9 pwm=0.566
Stats 790744.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2491178 bytes_read=817006 bytes_retransmit=9 bytes_invalid=0 send_seq=57381 receive_seq=57381 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992862 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=559799 sysload=0.20 cputime=112.851 memavail=7300364 print_time=2278.662 buffer_time=2.074 print_stall=0 extruder: target=240 temp=240.1 pwm=0.447
Stats 790745.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2495394 bytes_read=817679 bytes_retransmit=9 bytes_invalid=0 send_seq=57457 receive_seq=57457 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992929 heater_bed: target=80 temp=80.1 pwm=0.426 sd_pos=561395 sysload=0.20 cputime=112.946 memavail=7299372 print_time=2279.749 buffer_time=2.160 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 790746.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2499657 bytes_read=818371 bytes_retransmit=9 bytes_invalid=0 send_seq=57537 receive_seq=57537 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992917 heater_bed: target=80 temp=80.1 pwm=0.322 sd_pos=563030 sysload=0.20 cputime=113.033 memavail=7299372 print_time=2280.860 buffer_time=2.271 print_stall=0 extruder: target=240 temp=239.9 pwm=0.481
Stats 790747.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2503045 bytes_read=818964 bytes_retransmit=9 bytes_invalid=0 send_seq=57600 receive_seq=57600 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992913 heater_bed: target=80 temp=80.1 pwm=0.405 sd_pos=564117 sysload=0.20 cputime=113.111 memavail=7299372 print_time=2281.734 buffer_time=2.144 print_stall=0 extruder: target=240 temp=240.2 pwm=0.349
Stats 790748.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2506250 bytes_read=819578 bytes_retransmit=9 bytes_invalid=0 send_seq=57661 receive_seq=57661 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992910 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=565196 sysload=0.19 cputime=113.187 memavail=7299148 print_time=2282.607 buffer_time=2.016 print_stall=0 extruder: target=240 temp=240.3 pwm=0.422
Stats 790749.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2510308 bytes_read=820240 bytes_retransmit=9 bytes_invalid=0 send_seq=57735 receive_seq=57735 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992910 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=566637 sysload=0.19 cputime=113.269 memavail=7298896 print_time=2283.749 buffer_time=2.157 print_stall=0 extruder: target=240 temp=240.2 pwm=0.459
Stats 790750.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2514463 bytes_read=820903 bytes_retransmit=9 bytes_invalid=0 send_seq=57812 receive_seq=57812 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119992934 heater_bed: target=80 temp=80.1 pwm=0.367 sd_pos=568366 sysload=0.19 cputime=113.357 memavail=7298656 print_time=2284.831 buffer_time=2.238 print_stall=0 extruder: target=240 temp=239.9 pwm=0.593
Stats 790751.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2517865 bytes_read=821516 bytes_retransmit=9 bytes_invalid=0 send_seq=57876 receive_seq=57876 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992928 heater_bed: target=80 temp=80.1 pwm=0.336 sd_pos=569731 sysload=0.19 cputime=113.436 memavail=7298656 print_time=2285.657 buffer_time=2.064 print_stall=0 extruder: target=240 temp=240.0 pwm=0.536
Stats 790752.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2522321 bytes_read=822218 bytes_retransmit=9 bytes_invalid=0 send_seq=57958 receive_seq=57958 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992920 heater_bed: target=80 temp=80.1 pwm=0.415 sd_pos=571579 sysload=0.19 cputime=113.522 memavail=7298656 print_time=2286.759 buffer_time=2.165 print_stall=0 extruder: target=240 temp=240.0 pwm=0.477
Stats 790753.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2526802 bytes_read=822907 bytes_retransmit=9 bytes_invalid=0 send_seq=58041 receive_seq=58037 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992912 heater_bed: target=80 temp=80.1 pwm=0.355 sd_pos=573191 sysload=0.17 cputime=113.595 memavail=7297916 print_time=2287.844 buffer_time=2.245 print_stall=0 extruder: target=240 temp=239.8 pwm=0.568
Stats 790754.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2530169 bytes_read=823540 bytes_retransmit=9 bytes_invalid=0 send_seq=58105 receive_seq=58105 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=574513 sysload=0.17 cputime=113.683 memavail=7297916 print_time=2288.651 buffer_time=2.051 print_stall=0 extruder: target=240 temp=240.1 pwm=0.435
Stats 790755.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2534553 bytes_read=824232 bytes_retransmit=9 bytes_invalid=0 send_seq=58185 receive_seq=58185 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119992910 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=576295 sysload=0.17 cputime=113.775 memavail=7298676 print_time=2289.752 buffer_time=2.153 print_stall=0 extruder: target=240 temp=239.7 pwm=0.642
Stats 790756.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2538510 bytes_read=824885 bytes_retransmit=9 bytes_invalid=0 send_seq=58260 receive_seq=58260 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992900 heater_bed: target=80 temp=80.1 pwm=0.366 sd_pos=577959 sysload=0.17 cputime=113.857 memavail=7298228 print_time=2290.777 buffer_time=2.178 print_stall=0 extruder: target=240 temp=240.0 pwm=0.494
Stats 790757.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2542064 bytes_read=825513 bytes_retransmit=9 bytes_invalid=0 send_seq=58327 receive_seq=58327 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119992889 heater_bed: target=80 temp=80.1 pwm=0.358 sd_pos=579238 sysload=0.17 cputime=113.943 memavail=7298228 print_time=2291.711 buffer_time=2.111 print_stall=0 extruder: target=240 temp=239.8 pwm=0.551
Stats 790758.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2546518 bytes_read=826230 bytes_retransmit=9 bytes_invalid=0 send_seq=58410 receive_seq=58410 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992889 heater_bed: target=80 temp=80.1 pwm=0.443 sd_pos=580996 sysload=0.16 cputime=114.035 memavail=7297988 print_time=2292.794 buffer_time=2.192 print_stall=0 extruder: target=240 temp=240.1 pwm=0.390
Stats 790759.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2550058 bytes_read=826836 bytes_retransmit=9 bytes_invalid=0 send_seq=58477 receive_seq=58477 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992883 heater_bed: target=80 temp=80.1 pwm=0.443 sd_pos=582371 sysload=0.16 cputime=114.118 memavail=7297988 print_time=2293.620 buffer_time=2.017 print_stall=0 extruder: target=240 temp=239.6 pwm=0.573
Stats 790760.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2554964 bytes_read=827570 bytes_retransmit=9 bytes_invalid=0 send_seq=58566 receive_seq=58566 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=313 freq=119992875 heater_bed: target=80 temp=80.1 pwm=0.353 sd_pos=583764 sysload=0.16 cputime=114.208 memavail=7297988 print_time=2294.978 buffer_time=2.375 print_stall=0 extruder: target=240 temp=239.8 pwm=0.558
Stats 790761.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2556176 bytes_read=828002 bytes_retransmit=9 bytes_invalid=0 send_seq=58594 receive_seq=58594 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992866 heater_bed: target=80 temp=80.1 pwm=0.397 sd_pos=584106 sysload=0.16 cputime=114.267 memavail=7297988 print_time=2295.889 buffer_time=2.285 print_stall=0 extruder: target=240 temp=240.0 pwm=0.463
Stats 790762.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2557014 bytes_read=828385 bytes_retransmit=9 bytes_invalid=0 send_seq=58615 receive_seq=58615 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992860 heater_bed: target=80 temp=80.1 pwm=0.397 sd_pos=584430 sysload=0.16 cputime=114.320 memavail=7296480 print_time=2296.801 buffer_time=2.196 print_stall=0 extruder: target=240 temp=240.0 pwm=0.524
Stats 790763.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2559180 bytes_read=828914 bytes_retransmit=9 bytes_invalid=0 send_seq=58659 receive_seq=58659 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992888 heater_bed: target=80 temp=80.1 pwm=0.448 sd_pos=584709 sysload=0.23 cputime=114.386 memavail=7294240 print_time=2297.945 buffer_time=2.340 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 790764.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2559822 bytes_read=829306 bytes_retransmit=9 bytes_invalid=0 send_seq=58679 receive_seq=58679 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119992878 heater_bed: target=80 temp=80.1 pwm=0.398 sd_pos=585115 sysload=0.23 cputime=114.450 memavail=7294240 print_time=2300.004 buffer_time=3.398 print_stall=0 extruder: target=240 temp=239.8 pwm=0.567
Stats 790765.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2560059 bytes_read=829659 bytes_retransmit=9 bytes_invalid=0 send_seq=58694 receive_seq=58694 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=585115 sysload=0.23 cputime=114.503 memavail=7294240 print_time=2300.004 buffer_time=2.398 print_stall=0 extruder: target=240 temp=239.9 pwm=0.513
Stats 790766.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2561095 bytes_read=830077 bytes_retransmit=9 bytes_invalid=0 send_seq=58719 receive_seq=58719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992862 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=585545 sysload=0.23 cputime=114.569 memavail=7294240 print_time=2301.059 buffer_time=2.452 print_stall=0 extruder: target=240 temp=240.1 pwm=0.450
Stats 790767.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2561914 bytes_read=830489 bytes_retransmit=9 bytes_invalid=0 send_seq=58743 receive_seq=58743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=80.0 pwm=0.362 sd_pos=585602 sysload=0.23 cputime=114.632 memavail=7294164 print_time=2301.796 buffer_time=2.188 print_stall=0 extruder: target=240 temp=240.0 pwm=0.514
Stats 790768.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2563013 bytes_read=830917 bytes_retransmit=9 bytes_invalid=0 send_seq=58770 receive_seq=58770 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.0 pwm=0.508 sd_pos=585806 sysload=0.21 cputime=114.696 memavail=7294232 print_time=2303.024 buffer_time=2.414 print_stall=0 extruder: target=240 temp=240.2 pwm=0.432
Stats 790769.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2564013 bytes_read=831340 bytes_retransmit=9 bytes_invalid=0 send_seq=58796 receive_seq=58796 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119992852 heater_bed: target=80 temp=80.0 pwm=0.509 sd_pos=586701 sysload=0.21 cputime=114.762 memavail=7294232 print_time=2303.744 buffer_time=2.134 print_stall=0 extruder: target=240 temp=240.1 pwm=0.520
Stats 790770.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2564469 bytes_read=831717 bytes_retransmit=9 bytes_invalid=0 send_seq=58813 receive_seq=58813 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=79.9 pwm=0.575 sd_pos=586701 sysload=0.21 cputime=114.811 memavail=7297860 print_time=2304.782 buffer_time=2.172 print_stall=0 extruder: target=240 temp=240.0 pwm=0.526
Stats 790771.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2564989 bytes_read=832090 bytes_retransmit=9 bytes_invalid=0 send_seq=58832 receive_seq=58832 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=79.9 pwm=0.446 sd_pos=586757 sysload=0.21 cputime=114.866 memavail=7297736 print_time=2306.156 buffer_time=2.546 print_stall=0 extruder: target=240 temp=240.0 pwm=0.491
Stats 790772.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2566492 bytes_read=832548 bytes_retransmit=9 bytes_invalid=0 send_seq=58865 receive_seq=58865 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992864 heater_bed: target=80 temp=79.9 pwm=0.362 sd_pos=586842 sysload=0.21 cputime=114.930 memavail=7296504 print_time=2307.097 buffer_time=2.486 print_stall=0 extruder: target=240 temp=240.2 pwm=0.398
Stats 790773.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2567597 bytes_read=832995 bytes_retransmit=9 bytes_invalid=0 send_seq=58893 receive_seq=58893 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992868 heater_bed: target=80 temp=79.9 pwm=0.499 sd_pos=586898 sysload=0.19 cputime=114.986 memavail=7296008 print_time=2307.801 buffer_time=2.189 print_stall=0 extruder: target=240 temp=239.8 pwm=0.572
Stats 790774.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2569146 bytes_read=833453 bytes_retransmit=9 bytes_invalid=0 send_seq=58929 receive_seq=58929 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992861 heater_bed: target=80 temp=79.9 pwm=0.436 sd_pos=587011 sysload=0.19 cputime=115.047 memavail=7295012 print_time=2308.881 buffer_time=2.268 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 790775.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2570395 bytes_read=833896 bytes_retransmit=9 bytes_invalid=0 send_seq=58959 receive_seq=58959 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=80 temp=80.0 pwm=0.348 sd_pos=587583 sysload=0.19 cputime=115.115 memavail=7294772 print_time=2311.383 buffer_time=3.770 print_stall=0 extruder: target=240 temp=240.1 pwm=0.467
Stats 790776.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2570605 bytes_read=834263 bytes_retransmit=9 bytes_invalid=0 send_seq=58974 receive_seq=58974 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992852 heater_bed: target=80 temp=80.0 pwm=0.357 sd_pos=587583 sysload=0.19 cputime=115.178 memavail=7294772 print_time=2311.383 buffer_time=2.769 print_stall=0 extruder: target=240 temp=240.2 pwm=0.450
Stats 790777.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2571037 bytes_read=834626 bytes_retransmit=9 bytes_invalid=0 send_seq=58991 receive_seq=58991 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992846 heater_bed: target=80 temp=80.0 pwm=0.394 sd_pos=587758 sysload=0.19 cputime=115.244 memavail=7294772 print_time=2312.042 buffer_time=2.427 print_stall=0 extruder: target=240 temp=240.3 pwm=0.399
Stats 790778.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2571926 bytes_read=835070 bytes_retransmit=9 bytes_invalid=0 send_seq=59016 receive_seq=59016 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=588011 sysload=0.17 cputime=115.315 memavail=7294772 print_time=2312.825 buffer_time=2.210 print_stall=0 extruder: target=240 temp=240.4 pwm=0.345
Stats 790779.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2572910 bytes_read=835497 bytes_retransmit=9 bytes_invalid=0 send_seq=59043 receive_seq=59043 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=588383 sysload=0.17 cputime=115.380 memavail=7294520 print_time=2313.631 buffer_time=2.016 print_stall=0 extruder: target=240 temp=240.0 pwm=0.557
Stats 790780.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2574296 bytes_read=835940 bytes_retransmit=9 bytes_invalid=0 send_seq=59076 receive_seq=59076 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992869 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=588958 sysload=0.17 cputime=115.459 memavail=7294520 print_time=2316.816 buffer_time=4.200 print_stall=0 extruder: target=240 temp=239.9 pwm=0.552
Stats 790781.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2574517 bytes_read=836308 bytes_retransmit=9 bytes_invalid=0 send_seq=59091 receive_seq=59091 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992864 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=588958 sysload=0.17 cputime=115.510 memavail=7297752 print_time=2316.816 buffer_time=3.199 print_stall=0 extruder: target=240 temp=240.3 pwm=0.353
Stats 790782.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2574759 bytes_read=836685 bytes_retransmit=9 bytes_invalid=0 send_seq=59108 receive_seq=59108 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=588958 sysload=0.17 cputime=115.564 memavail=7297752 print_time=2316.816 buffer_time=2.198 print_stall=0 extruder: target=240 temp=240.2 pwm=0.429
Stats 790783.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2575989 bytes_read=837123 bytes_retransmit=9 bytes_invalid=0 send_seq=59137 receive_seq=59137 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=589044 sysload=0.16 cputime=115.620 memavail=7297280 print_time=2317.692 buffer_time=2.073 print_stall=0 extruder: target=240 temp=240.0 pwm=0.492
Stats 790784.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2578805 bytes_read=837691 bytes_retransmit=9 bytes_invalid=0 send_seq=59192 receive_seq=59192 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992850 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=589697 sysload=0.16 cputime=115.690 memavail=7296776 print_time=2318.963 buffer_time=2.344 print_stall=0 extruder: target=240 temp=240.0 pwm=0.464
Stats 790785.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2579672 bytes_read=838108 bytes_retransmit=9 bytes_invalid=0 send_seq=59217 receive_seq=59217 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=80.0 pwm=0.393 sd_pos=589753 sysload=0.16 cputime=115.751 memavail=7296776 print_time=2319.892 buffer_time=2.272 print_stall=0 extruder: target=240 temp=240.0 pwm=0.463
Stats 790786.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2580997 bytes_read=838541 bytes_retransmit=9 bytes_invalid=0 send_seq=59248 receive_seq=59248 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=80.0 pwm=0.283 sd_pos=589927 sysload=0.16 cputime=115.810 memavail=7296776 print_time=2321.542 buffer_time=2.921 print_stall=0 extruder: target=240 temp=240.0 pwm=0.456
Stats 790787.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2581523 bytes_read=838934 bytes_retransmit=9 bytes_invalid=0 send_seq=59268 receive_seq=59268 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.0 pwm=0.318 sd_pos=590026 sysload=0.16 cputime=115.867 memavail=7296536 print_time=2323.112 buffer_time=3.491 print_stall=0 extruder: target=240 temp=240.4 pwm=0.277
Stats 790788.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2581773 bytes_read=839316 bytes_retransmit=9 bytes_invalid=0 send_seq=59283 receive_seq=59283 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=80.1 pwm=0.285 sd_pos=590026 sysload=0.15 cputime=115.918 memavail=7296536 print_time=2323.112 buffer_time=2.490 print_stall=0 extruder: target=240 temp=240.4 pwm=0.297
Stats 790789.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2582031 bytes_read=839659 bytes_retransmit=9 bytes_invalid=0 send_seq=59296 receive_seq=59296 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992864 heater_bed: target=80 temp=80.1 pwm=0.349 sd_pos=590053 sysload=0.15 cputime=115.974 memavail=7296536 print_time=2324.040 buffer_time=2.416 print_stall=0 extruder: target=240 temp=240.3 pwm=0.393
Stats 790790.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2582933 bytes_read=840072 bytes_retransmit=9 bytes_invalid=0 send_seq=59320 receive_seq=59320 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=80.1 pwm=0.410 sd_pos=590053 sysload=0.15 cputime=116.028 memavail=7296540 print_time=2325.046 buffer_time=2.422 print_stall=0 extruder: target=240 temp=240.3 pwm=0.393
Stats 790791.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2583240 bytes_read=840434 bytes_retransmit=9 bytes_invalid=0 send_seq=59334 receive_seq=59334 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992850 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=590053 sysload=0.15 cputime=116.073 memavail=7296540 print_time=2325.640 buffer_time=2.015 print_stall=0 extruder: target=240 temp=240.0 pwm=0.481
Stats 790792.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2583763 bytes_read=840797 bytes_retransmit=9 bytes_invalid=0 send_seq=59351 receive_seq=59351 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=590238 sysload=0.15 cputime=116.129 memavail=7295784 print_time=2327.256 buffer_time=2.631 print_stall=0 extruder: target=240 temp=239.8 pwm=0.524
Stats 790793.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2584590 bytes_read=841215 bytes_retransmit=9 bytes_invalid=0 send_seq=59373 receive_seq=59373 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=590468 sysload=0.22 cputime=116.194 memavail=7294776 print_time=2327.914 buffer_time=2.288 print_stall=0 extruder: target=240 temp=239.8 pwm=0.524
Stats 790794.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2584954 bytes_read=841579 bytes_retransmit=9 bytes_invalid=0 send_seq=59389 receive_seq=59389 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=590496 sysload=0.22 cputime=116.243 memavail=7294776 print_time=2328.805 buffer_time=2.179 print_stall=0 extruder: target=240 temp=239.7 pwm=0.508
Stats 790795.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2586067 bytes_read=841985 bytes_retransmit=9 bytes_invalid=0 send_seq=59416 receive_seq=59416 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992842 heater_bed: target=80 temp=80.1 pwm=0.397 sd_pos=590697 sysload=0.22 cputime=116.297 memavail=7294780 print_time=2329.895 buffer_time=2.268 print_stall=0 extruder: target=240 temp=239.7 pwm=0.551
Stats 790796.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2587580 bytes_read=842451 bytes_retransmit=9 bytes_invalid=0 send_seq=59451 receive_seq=59451 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992839 heater_bed: target=80 temp=80.1 pwm=0.344 sd_pos=590985 sysload=0.22 cputime=116.365 memavail=7294780 print_time=2331.226 buffer_time=2.599 print_stall=0 extruder: target=240 temp=239.8 pwm=0.549
Stats 790797.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2588953 bytes_read=842913 bytes_retransmit=9 bytes_invalid=0 send_seq=59485 receive_seq=59485 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=591188 sysload=0.22 cputime=116.453 memavail=7294272 print_time=2332.960 buffer_time=3.327 print_stall=0 extruder: target=240 temp=240.1 pwm=0.418
Stats 790798.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2589163 bytes_read=843281 bytes_retransmit=9 bytes_invalid=0 send_seq=59500 receive_seq=59500 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=591188 sysload=0.20 cputime=116.503 memavail=7294272 print_time=2332.960 buffer_time=2.325 print_stall=0 extruder: target=240 temp=240.2 pwm=0.408
Stats 790799.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2589599 bytes_read=843659 bytes_retransmit=9 bytes_invalid=0 send_seq=59517 receive_seq=59517 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=591216 sysload=0.20 cputime=116.560 memavail=7294276 print_time=2334.485 buffer_time=2.849 print_stall=0 extruder: target=240 temp=240.0 pwm=0.481
Stats 790800.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2589822 bytes_read=844016 bytes_retransmit=9 bytes_invalid=0 send_seq=59530 receive_seq=59530 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=591244 sysload=0.20 cputime=116.627 memavail=7294276 print_time=2335.430 buffer_time=2.795 print_stall=0 extruder: target=240 temp=239.8 pwm=0.569
Stats 790801.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2590437 bytes_read=844389 bytes_retransmit=9 bytes_invalid=0 send_seq=59549 receive_seq=59549 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=591244 sysload=0.20 cputime=116.687 memavail=7294276 print_time=2336.011 buffer_time=2.375 print_stall=0 extruder: target=240 temp=239.8 pwm=0.466
Stats 790802.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2591065 bytes_read=844787 bytes_retransmit=9 bytes_invalid=0 send_seq=59570 receive_seq=59570 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=591244 sysload=0.20 cputime=116.733 memavail=7294276 print_time=2337.066 buffer_time=2.428 print_stall=0 extruder: target=240 temp=240.0 pwm=0.414
Stats 790803.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2591702 bytes_read=845194 bytes_retransmit=9 bytes_invalid=0 send_seq=59590 receive_seq=59590 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=591416 sysload=0.18 cputime=116.796 memavail=7293524 print_time=2338.705 buffer_time=3.067 print_stall=0 extruder: target=240 temp=240.2 pwm=0.402
Stats 790804.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2591886 bytes_read=845532 bytes_retransmit=9 bytes_invalid=0 send_seq=59602 receive_seq=59602 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992816 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=591416 sysload=0.18 cputime=116.849 memavail=7293524 print_time=2338.705 buffer_time=2.066 print_stall=0 extruder: target=240 temp=240.3 pwm=0.381
Stats 790805.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2592878 bytes_read=845950 bytes_retransmit=9 bytes_invalid=0 send_seq=59627 receive_seq=59627 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=80.0 pwm=0.391 sd_pos=591645 sysload=0.18 cputime=116.907 memavail=7293524 print_time=2339.668 buffer_time=2.029 print_stall=0 extruder: target=240 temp=240.3 pwm=0.409
Stats 790806.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2593615 bytes_read=846357 bytes_retransmit=9 bytes_invalid=0 send_seq=59650 receive_seq=59650 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=80.0 pwm=0.380 sd_pos=591714 sysload=0.18 cputime=116.970 memavail=7293524 print_time=2340.650 buffer_time=2.010 print_stall=0 extruder: target=240 temp=240.0 pwm=0.515
Stats 790807.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2596404 bytes_read=846905 bytes_retransmit=9 bytes_invalid=0 send_seq=59704 receive_seq=59704 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=80.0 pwm=0.312 sd_pos=592174 sysload=0.18 cputime=117.045 memavail=7293524 print_time=2342.222 buffer_time=2.581 print_stall=0 extruder: target=240 temp=239.8 pwm=0.587
Stats 790808.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2599243 bytes_read=847498 bytes_retransmit=9 bytes_invalid=0 send_seq=59761 receive_seq=59761 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992816 heater_bed: target=80 temp=80.0 pwm=0.352 sd_pos=593009 sysload=0.33 cputime=117.125 memavail=7293524 print_time=2342.918 buffer_time=2.277 print_stall=0 extruder: target=240 temp=239.7 pwm=0.576
Stats 790809.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2601981 bytes_read=848060 bytes_retransmit=9 bytes_invalid=0 send_seq=59815 receive_seq=59815 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=594133 sysload=0.33 cputime=117.205 memavail=7293524 print_time=2343.760 buffer_time=2.118 print_stall=0 extruder: target=240 temp=240.2 pwm=0.380
Stats 790810.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2605484 bytes_read=848673 bytes_retransmit=9 bytes_invalid=0 send_seq=59882 receive_seq=59882 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=80.1 pwm=0.347 sd_pos=594804 sysload=0.33 cputime=117.279 memavail=7293524 print_time=2344.781 buffer_time=2.139 print_stall=0 extruder: target=240 temp=240.0 pwm=0.515
Stats 790811.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2608968 bytes_read=849296 bytes_retransmit=9 bytes_invalid=0 send_seq=59948 receive_seq=59948 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992898 heater_bed: target=80 temp=80.1 pwm=0.386 sd_pos=596290 sysload=0.33 cputime=117.361 memavail=7293524 print_time=2345.863 buffer_time=2.220 print_stall=0 extruder: target=240 temp=240.2 pwm=0.448
Stats 790812.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2611677 bytes_read=849848 bytes_retransmit=9 bytes_invalid=0 send_seq=60000 receive_seq=60000 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992890 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=597416 sysload=0.33 cputime=117.433 memavail=7293524 print_time=2346.664 buffer_time=2.020 print_stall=0 extruder: target=240 temp=240.4 pwm=0.341
Stats 790813.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2615476 bytes_read=850497 bytes_retransmit=9 bytes_invalid=0 send_seq=60071 receive_seq=60071 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992883 heater_bed: target=80 temp=80.1 pwm=0.349 sd_pos=598670 sysload=0.46 cputime=117.515 memavail=7293524 print_time=2347.778 buffer_time=2.133 print_stall=0 extruder: target=240 temp=240.1 pwm=0.499
Stats 790814.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2619128 bytes_read=851135 bytes_retransmit=9 bytes_invalid=0 send_seq=60140 receive_seq=60140 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992877 heater_bed: target=80 temp=80.1 pwm=0.431 sd_pos=599898 sysload=0.46 cputime=117.587 memavail=7293524 print_time=2348.892 buffer_time=2.246 print_stall=0 extruder: target=240 temp=239.9 pwm=0.583
Stats 790815.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2622090 bytes_read=851712 bytes_retransmit=9 bytes_invalid=0 send_seq=60197 receive_seq=60197 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=600901 sysload=0.46 cputime=117.664 memavail=7293524 print_time=2349.778 buffer_time=2.131 print_stall=0 extruder: target=240 temp=239.9 pwm=0.551
Stats 790816.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2625311 bytes_read=852295 bytes_retransmit=9 bytes_invalid=0 send_seq=60258 receive_seq=60258 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.1 pwm=0.337 sd_pos=602467 sysload=0.46 cputime=117.737 memavail=7293076 print_time=2350.826 buffer_time=2.179 print_stall=0 extruder: target=240 temp=239.8 pwm=0.517
Stats 790817.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2628682 bytes_read=852903 bytes_retransmit=9 bytes_invalid=0 send_seq=60321 receive_seq=60321 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992865 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=604068 sysload=0.46 cputime=117.826 memavail=7293076 print_time=2351.874 buffer_time=2.227 print_stall=0 extruder: target=240 temp=239.9 pwm=0.481
Stats 790818.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2631409 bytes_read=853486 bytes_retransmit=9 bytes_invalid=0 send_seq=60376 receive_seq=60376 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992869 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=605286 sysload=0.59 cputime=117.904 memavail=7293816 print_time=2352.661 buffer_time=2.012 print_stall=0 extruder: target=240 temp=240.0 pwm=0.439
Stats 790819.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2634950 bytes_read=854094 bytes_retransmit=9 bytes_invalid=0 send_seq=60442 receive_seq=60442 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=80.1 pwm=0.326 sd_pos=606762 sysload=0.59 cputime=117.987 memavail=7293832 print_time=2353.742 buffer_time=2.093 print_stall=0 extruder: target=240 temp=240.2 pwm=0.439
Stats 790820.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2638456 bytes_read=854722 bytes_retransmit=9 bytes_invalid=0 send_seq=60509 receive_seq=60509 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=80.1 pwm=0.381 sd_pos=608384 sysload=0.59 cputime=118.056 memavail=7293832 print_time=2354.791 buffer_time=2.140 print_stall=0 extruder: target=240 temp=240.1 pwm=0.465
Stats 790821.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2641968 bytes_read=855349 bytes_retransmit=9 bytes_invalid=0 send_seq=60576 receive_seq=60576 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992864 heater_bed: target=80 temp=80.1 pwm=0.362 sd_pos=609948 sysload=0.59 cputime=118.122 memavail=7290620 print_time=2355.839 buffer_time=2.188 print_stall=0 extruder: target=240 temp=240.0 pwm=0.500
Stats 790822.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2645618 bytes_read=855967 bytes_retransmit=9 bytes_invalid=0 send_seq=60644 receive_seq=60644 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=80.1 pwm=0.394 sd_pos=611423 sysload=0.59 cputime=118.172 memavail=7296648 print_time=2356.961 buffer_time=2.309 print_stall=0 extruder: target=240 temp=239.8 pwm=0.546
Stats 790823.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2648111 bytes_read=856516 bytes_retransmit=9 bytes_invalid=0 send_seq=60692 receive_seq=60692 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992853 heater_bed: target=80 temp=80.1 pwm=0.394 sd_pos=612597 sysload=0.62 cputime=118.228 memavail=7295416 print_time=2357.747 buffer_time=2.094 print_stall=0 extruder: target=240 temp=239.7 pwm=0.546
Stats 790824.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2651681 bytes_read=857148 bytes_retransmit=9 bytes_invalid=0 send_seq=60760 receive_seq=60760 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.1 pwm=0.394 sd_pos=614172 sysload=0.62 cputime=118.308 memavail=7295416 print_time=2358.795 buffer_time=2.142 print_stall=0 extruder: target=240 temp=239.8 pwm=0.526
Stats 790825.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2655245 bytes_read=857756 bytes_retransmit=9 bytes_invalid=0 send_seq=60826 receive_seq=60826 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992868 heater_bed: target=80 temp=80.1 pwm=0.394 sd_pos=615796 sysload=0.62 cputime=118.364 memavail=7295416 print_time=2359.843 buffer_time=2.189 print_stall=0 extruder: target=240 temp=240.1 pwm=0.367
Stats 790826.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2658091 bytes_read=858334 bytes_retransmit=9 bytes_invalid=0 send_seq=60883 receive_seq=60883 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=80.1 pwm=0.425 sd_pos=616129 sysload=0.62 cputime=118.428 memavail=7297612 print_time=2360.710 buffer_time=2.055 print_stall=0 extruder: target=240 temp=240.3 pwm=0.327
Stats 790827.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=2659453 bytes_read=858786 bytes_retransmit=9 bytes_invalid=0 send_seq=60915 receive_seq=60915 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=80.1 pwm=0.425 sd_pos=616475 sysload=0.62 cputime=118.485 memavail=7297108 print_time=2361.679 buffer_time=2.024 print_stall=0 extruder: target=240 temp=239.8 pwm=0.598
Stats 790828.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2661854 bytes_read=859325 bytes_retransmit=9 bytes_invalid=0 send_seq=60964 receive_seq=60964 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=616674 sysload=0.57 cputime=118.551 memavail=7295880 print_time=2362.931 buffer_time=2.275 print_stall=0 extruder: target=240 temp=239.8 pwm=0.598
Stats 790829.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2662906 bytes_read=859757 bytes_retransmit=9 bytes_invalid=0 send_seq=60992 receive_seq=60992 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=616904 sysload=0.57 cputime=118.610 memavail=7295640 print_time=2363.984 buffer_time=2.326 print_stall=0 extruder: target=240 temp=239.8 pwm=0.518
Stats 790830.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2663965 bytes_read=860171 bytes_retransmit=9 bytes_invalid=0 send_seq=61018 receive_seq=61018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992850 heater_bed: target=80 temp=80.1 pwm=0.384 sd_pos=617399 sysload=0.57 cputime=118.655 memavail=7295640 print_time=2365.795 buffer_time=3.137 print_stall=0 extruder: target=240 temp=240.1 pwm=0.376
Stats 790831.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2664133 bytes_read=860497 bytes_retransmit=9 bytes_invalid=0 send_seq=61029 receive_seq=61029 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992843 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=617399 sysload=0.57 cputime=118.690 memavail=7295640 print_time=2365.795 buffer_time=2.136 print_stall=0 extruder: target=240 temp=240.2 pwm=0.445
Stats 790832.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=2664476 bytes_read=860873 bytes_retransmit=9 bytes_invalid=0 send_seq=61043 receive_seq=61043 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=617427 sysload=0.57 cputime=118.731 memavail=7295640 print_time=2367.244 buffer_time=2.585 print_stall=0 extruder: target=240 temp=240.3 pwm=0.446
Stats 790833.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2666251 bytes_read=861366 bytes_retransmit=9 bytes_invalid=0 send_seq=61083 receive_seq=61083 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=617623 sysload=0.52 cputime=118.800 memavail=7295640 print_time=2368.614 buffer_time=2.955 print_stall=0 extruder: target=240 temp=240.1 pwm=0.539
Stats 790834.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2667638 bytes_read=861809 bytes_retransmit=9 bytes_invalid=0 send_seq=61116 receive_seq=61116 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=618577 sysload=0.52 cputime=118.855 memavail=7295640 print_time=2369.539 buffer_time=2.879 print_stall=0 extruder: target=240 temp=240.1 pwm=0.558
Stats 790835.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2670148 bytes_read=862366 bytes_retransmit=9 bytes_invalid=0 send_seq=61166 receive_seq=61166 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992835 heater_bed: target=80 temp=80.0 pwm=0.513 sd_pos=619003 sysload=0.52 cputime=118.923 memavail=7295640 print_time=2370.839 buffer_time=3.179 print_stall=0 extruder: target=240 temp=239.7 pwm=0.637
Stats 790836.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2670385 bytes_read=862714 bytes_retransmit=9 bytes_invalid=0 send_seq=61180 receive_seq=61180 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=619003 sysload=0.52 cputime=118.970 memavail=7295640 print_time=2370.839 buffer_time=2.178 print_stall=0 extruder: target=240 temp=239.9 pwm=0.467
Stats 790837.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2671008 bytes_read=863087 bytes_retransmit=9 bytes_invalid=0 send_seq=61199 receive_seq=61199 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=80.0 pwm=0.349 sd_pos=619235 sysload=0.52 cputime=119.018 memavail=7295640 print_time=2371.739 buffer_time=2.076 print_stall=0 extruder: target=240 temp=239.8 pwm=0.486
Stats 790838.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2672052 bytes_read=863539 bytes_retransmit=9 bytes_invalid=0 send_seq=61225 receive_seq=61225 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992843 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=619922 sysload=0.48 cputime=119.083 memavail=7295644 print_time=2374.965 buffer_time=4.302 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 790839.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2672258 bytes_read=863898 bytes_retransmit=9 bytes_invalid=0 send_seq=61239 receive_seq=61239 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992835 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=619922 sysload=0.48 cputime=119.129 memavail=7295644 print_time=2374.965 buffer_time=3.302 print_stall=0 extruder: target=240 temp=240.2 pwm=0.418
Stats 790840.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2672474 bytes_read=864246 bytes_retransmit=9 bytes_invalid=0 send_seq=61253 receive_seq=61253 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.0 pwm=0.362 sd_pos=619922 sysload=0.48 cputime=119.180 memavail=7295404 print_time=2374.965 buffer_time=2.301 print_stall=0 extruder: target=240 temp=240.2 pwm=0.446
Stats 790841.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2674002 bytes_read=864733 bytes_retransmit=9 bytes_invalid=0 send_seq=61289 receive_seq=61289 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992861 heater_bed: target=80 temp=80.0 pwm=0.385 sd_pos=620167 sysload=0.48 cputime=119.243 memavail=7295404 print_time=2375.923 buffer_time=2.258 print_stall=0 extruder: target=240 temp=240.1 pwm=0.481
Stats 790842.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2674843 bytes_read=865126 bytes_retransmit=9 bytes_invalid=0 send_seq=61312 receive_seq=61312 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992858 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=620224 sysload=0.48 cputime=119.291 memavail=7295404 print_time=2376.852 buffer_time=2.186 print_stall=0 extruder: target=240 temp=240.1 pwm=0.539
Stats 790843.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2676050 bytes_read=865564 bytes_retransmit=9 bytes_invalid=0 send_seq=61341 receive_seq=61341 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=620369 sysload=0.44 cputime=119.340 memavail=7295404 print_time=2378.455 buffer_time=2.789 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 790844.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2676660 bytes_read=865981 bytes_retransmit=9 bytes_invalid=0 send_seq=61363 receive_seq=61363 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=80.1 pwm=0.219 sd_pos=620467 sysload=0.44 cputime=119.391 memavail=7295404 print_time=2380.068 buffer_time=3.401 print_stall=0 extruder: target=240 temp=239.8 pwm=0.557
Stats 790845.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2676865 bytes_read=866324 bytes_retransmit=9 bytes_invalid=0 send_seq=61376 receive_seq=61376 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=80.1 pwm=0.331 sd_pos=620467 sysload=0.44 cputime=119.442 memavail=7295164 print_time=2380.068 buffer_time=2.400 print_stall=0 extruder: target=240 temp=240.1 pwm=0.405
Stats 790846.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2677128 bytes_read=866672 bytes_retransmit=9 bytes_invalid=0 send_seq=61390 receive_seq=61390 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=620494 sysload=0.44 cputime=119.494 memavail=7295164 print_time=2380.996 buffer_time=2.327 print_stall=0 extruder: target=240 temp=240.4 pwm=0.322
Stats 790847.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2678042 bytes_read=867104 bytes_retransmit=9 bytes_invalid=0 send_seq=61415 receive_seq=61415 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992852 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=620494 sysload=0.44 cputime=119.549 memavail=7295164 print_time=2381.979 buffer_time=2.309 print_stall=0 extruder: target=240 temp=240.4 pwm=0.374
Stats 790848.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2678562 bytes_read=867482 bytes_retransmit=9 bytes_invalid=0 send_seq=61432 receive_seq=61432 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=620648 sysload=0.41 cputime=119.600 memavail=7295164 print_time=2384.097 buffer_time=3.427 print_stall=0 extruder: target=240 temp=240.1 pwm=0.511
Stats 790849.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2678751 bytes_read=867825 bytes_retransmit=9 bytes_invalid=0 send_seq=61445 receive_seq=61445 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=620648 sysload=0.41 cputime=119.660 memavail=7295164 print_time=2384.097 buffer_time=2.426 print_stall=0 extruder: target=240 temp=239.8 pwm=0.605
Stats 790850.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2679632 bytes_read=868247 bytes_retransmit=9 bytes_invalid=0 send_seq=61468 receive_seq=61468 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992873 heater_bed: target=80 temp=80.0 pwm=0.517 sd_pos=620821 sysload=0.41 cputime=119.721 memavail=7295164 print_time=2384.838 buffer_time=2.166 print_stall=0 extruder: target=240 temp=239.9 pwm=0.481
Stats 790851.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2679992 bytes_read=868605 bytes_retransmit=9 bytes_invalid=0 send_seq=61484 receive_seq=61484 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992864 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=620850 sysload=0.41 cputime=119.780 memavail=7295164 print_time=2385.729 buffer_time=2.056 print_stall=0 extruder: target=240 temp=239.9 pwm=0.471
Stats 790852.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2681084 bytes_read=869018 bytes_retransmit=9 bytes_invalid=0 send_seq=61511 receive_seq=61511 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=621051 sysload=0.41 cputime=119.842 memavail=7294928 print_time=2386.807 buffer_time=2.133 print_stall=0 extruder: target=240 temp=240.0 pwm=0.471
Stats 790853.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2682595 bytes_read=869510 bytes_retransmit=9 bytes_invalid=0 send_seq=61545 receive_seq=61545 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=80 temp=80.1 pwm=0.300 sd_pos=621339 sysload=0.45 cputime=119.913 memavail=7293924 print_time=2388.138 buffer_time=2.463 print_stall=0 extruder: target=240 temp=239.8 pwm=0.531
Stats 790854.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2683864 bytes_read=869938 bytes_retransmit=9 bytes_invalid=0 send_seq=61575 receive_seq=61575 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=80.0 pwm=0.394 sd_pos=621484 sysload=0.45 cputime=119.993 memavail=7293924 print_time=2389.786 buffer_time=3.110 print_stall=0 extruder: target=240 temp=240.1 pwm=0.399
Stats 790855.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2684048 bytes_read=870291 bytes_retransmit=9 bytes_invalid=0 send_seq=61587 receive_seq=61587 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=621484 sysload=0.45 cputime=120.044 memavail=7296996 print_time=2389.786 buffer_time=2.108 print_stall=0 extruder: target=240 temp=240.1 pwm=0.483
Stats 790856.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2684647 bytes_read=870683 bytes_retransmit=9 bytes_invalid=0 send_seq=61607 receive_seq=61607 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992842 heater_bed: target=80 temp=80.0 pwm=0.388 sd_pos=621570 sysload=0.45 cputime=120.096 memavail=7296848 print_time=2391.394 buffer_time=2.715 print_stall=0 extruder: target=240 temp=240.0 pwm=0.490
Stats 790857.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2684902 bytes_read=871036 bytes_retransmit=9 bytes_invalid=0 send_seq=61622 receive_seq=61622 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.0 pwm=0.388 sd_pos=621597 sysload=0.45 cputime=120.155 memavail=7295008 print_time=2392.339 buffer_time=2.660 print_stall=0 extruder: target=240 temp=240.0 pwm=0.502
Stats 790858.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2685482 bytes_read=871434 bytes_retransmit=9 bytes_invalid=0 send_seq=61640 receive_seq=61640 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=621597 sysload=0.42 cputime=120.197 memavail=7295080 print_time=2392.896 buffer_time=2.216 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 790859.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2686136 bytes_read=871831 bytes_retransmit=9 bytes_invalid=0 send_seq=61661 receive_seq=61661 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.514 sd_pos=621597 sysload=0.42 cputime=120.247 memavail=7295080 print_time=2393.951 buffer_time=2.270 print_stall=0 extruder: target=240 temp=239.9 pwm=0.538
Stats 790860.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2686584 bytes_read=872199 bytes_retransmit=9 bytes_invalid=0 send_seq=61679 receive_seq=61679 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=621741 sysload=0.42 cputime=120.304 memavail=7294840 print_time=2395.496 buffer_time=2.815 print_stall=0 extruder: target=240 temp=239.6 pwm=0.627
Stats 790861.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2687126 bytes_read=872587 bytes_retransmit=9 bytes_invalid=0 send_seq=61698 receive_seq=61698 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=621857 sysload=0.42 cputime=120.355 memavail=7294840 print_time=2395.761 buffer_time=2.078 print_stall=0 extruder: target=240 temp=239.9 pwm=0.482
Stats 790862.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2687904 bytes_read=872989 bytes_retransmit=9 bytes_invalid=0 send_seq=61720 receive_seq=61720 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.0 pwm=0.376 sd_pos=621971 sysload=0.42 cputime=120.417 memavail=7294840 print_time=2397.414 buffer_time=2.730 print_stall=0 extruder: target=240 temp=240.1 pwm=0.401
Stats 790863.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2689210 bytes_read=873432 bytes_retransmit=9 bytes_invalid=0 send_seq=61750 receive_seq=61750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=80.0 pwm=0.376 sd_pos=622088 sysload=0.38 cputime=120.474 memavail=7294620 print_time=2398.461 buffer_time=2.777 print_stall=0 extruder: target=240 temp=240.2 pwm=0.401
Stats 790864.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2691467 bytes_read=873960 bytes_retransmit=9 bytes_invalid=0 send_seq=61797 receive_seq=61797 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=622456 sysload=0.38 cputime=120.535 memavail=7294620 print_time=2399.110 buffer_time=2.424 print_stall=0 extruder: target=240 temp=239.9 pwm=0.578
Stats 790865.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2694426 bytes_read=874538 bytes_retransmit=9 bytes_invalid=0 send_seq=61855 receive_seq=61855 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=623398 sysload=0.38 cputime=120.599 memavail=7294620 print_time=2399.792 buffer_time=2.106 print_stall=0 extruder: target=240 temp=239.6 pwm=0.603
Stats 790866.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2698956 bytes_read=875229 bytes_retransmit=9 bytes_invalid=0 send_seq=61939 receive_seq=61939 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=625075 sysload=0.38 cputime=120.688 memavail=7297044 print_time=2400.921 buffer_time=2.235 print_stall=0 extruder: target=240 temp=240.0 pwm=0.410
Stats 790867.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2703093 bytes_read=875891 bytes_retransmit=9 bytes_invalid=0 send_seq=62014 receive_seq=62014 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.0 pwm=0.328 sd_pos=625355 sysload=0.38 cputime=120.763 memavail=7297044 print_time=2403.038 buffer_time=3.351 print_stall=0 extruder: target=240 temp=240.3 pwm=0.319
Stats 790868.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2703344 bytes_read=876279 bytes_retransmit=9 bytes_invalid=0 send_seq=62030 receive_seq=62030 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=80.0 pwm=0.331 sd_pos=625355 sysload=0.35 cputime=120.818 memavail=7296804 print_time=2403.038 buffer_time=2.350 print_stall=0 extruder: target=240 temp=240.4 pwm=0.374
Stats 790869.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2705737 bytes_read=876802 bytes_retransmit=9 bytes_invalid=0 send_seq=62079 receive_seq=62079 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=80.0 pwm=0.289 sd_pos=625541 sysload=0.35 cputime=120.878 memavail=7296808 print_time=2404.617 buffer_time=2.928 print_stall=0 extruder: target=240 temp=240.1 pwm=0.502
Stats 790870.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2707271 bytes_read=877265 bytes_retransmit=9 bytes_invalid=0 send_seq=62113 receive_seq=62113 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=80.1 pwm=0.306 sd_pos=625997 sysload=0.35 cputime=120.934 memavail=7296808 print_time=2404.975 buffer_time=2.285 print_stall=0 extruder: target=240 temp=240.1 pwm=0.468
Stats 790871.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2710410 bytes_read=877857 bytes_retransmit=9 bytes_invalid=0 send_seq=62173 receive_seq=62173 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=80.1 pwm=0.306 sd_pos=627249 sysload=0.35 cputime=121.001 memavail=7296808 print_time=2405.808 buffer_time=2.118 print_stall=0 extruder: target=240 temp=240.1 pwm=0.452
Stats 790872.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2714443 bytes_read=878510 bytes_retransmit=9 bytes_invalid=0 send_seq=62248 receive_seq=62248 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=80.1 pwm=0.413 sd_pos=628968 sysload=0.35 cputime=121.095 memavail=7296808 print_time=2406.826 buffer_time=2.136 print_stall=0 extruder: target=240 temp=240.0 pwm=0.515
Stats 790873.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2718644 bytes_read=879204 bytes_retransmit=9 bytes_invalid=0 send_seq=62325 receive_seq=62325 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=80.1 pwm=0.357 sd_pos=630760 sysload=0.33 cputime=121.184 memavail=7299952 print_time=2407.900 buffer_time=2.209 print_stall=0 extruder: target=240 temp=240.4 pwm=0.308
Stats 790874.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2721764 bytes_read=879791 bytes_retransmit=9 bytes_invalid=0 send_seq=62384 receive_seq=62384 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=80 temp=80.1 pwm=0.357 sd_pos=632090 sysload=0.33 cputime=121.251 memavail=7299744 print_time=2408.706 buffer_time=2.014 print_stall=0 extruder: target=240 temp=240.3 pwm=0.373
Stats 790875.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2725804 bytes_read=880444 bytes_retransmit=9 bytes_invalid=0 send_seq=62459 receive_seq=62459 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992858 heater_bed: target=80 temp=80.1 pwm=0.469 sd_pos=633736 sysload=0.33 cputime=121.325 memavail=7299744 print_time=2409.834 buffer_time=2.142 print_stall=0 extruder: target=240 temp=240.5 pwm=0.304
Stats 790876.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2729536 bytes_read=881092 bytes_retransmit=9 bytes_invalid=0 send_seq=62530 receive_seq=62530 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=80.1 pwm=0.429 sd_pos=635420 sysload=0.33 cputime=121.412 memavail=7299056 print_time=2410.869 buffer_time=2.175 print_stall=0 extruder: target=240 temp=240.1 pwm=0.522
Stats 790877.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2733763 bytes_read=881784 bytes_retransmit=9 bytes_invalid=0 send_seq=62610 receive_seq=62610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992904 heater_bed: target=80 temp=80.1 pwm=0.406 sd_pos=637221 sysload=0.33 cputime=121.504 memavail=7298060 print_time=2411.943 buffer_time=2.249 print_stall=0 extruder: target=240 temp=239.8 pwm=0.621
Stats 790878.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2736977 bytes_read=882388 bytes_retransmit=9 bytes_invalid=0 send_seq=62672 receive_seq=62672 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=80.1 pwm=0.325 sd_pos=638597 sysload=0.30 cputime=121.577 memavail=7297808 print_time=2412.748 buffer_time=2.054 print_stall=0 extruder: target=240 temp=239.8 pwm=0.565
Stats 790879.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2741287 bytes_read=883071 bytes_retransmit=9 bytes_invalid=0 send_seq=62750 receive_seq=62750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992890 heater_bed: target=80 temp=80.1 pwm=0.299 sd_pos=640254 sysload=0.30 cputime=121.655 memavail=7297808 print_time=2413.815 buffer_time=2.121 print_stall=0 extruder: target=240 temp=239.8 pwm=0.546
Stats 790880.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2745424 bytes_read=883743 bytes_retransmit=9 bytes_invalid=0 send_seq=62826 receive_seq=62826 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992884 heater_bed: target=80 temp=80.1 pwm=0.324 sd_pos=641987 sysload=0.30 cputime=121.746 memavail=7297808 print_time=2414.850 buffer_time=2.155 print_stall=0 extruder: target=240 temp=240.0 pwm=0.483
Stats 790881.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2749721 bytes_read=884421 bytes_retransmit=9 bytes_invalid=0 send_seq=62906 receive_seq=62906 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992909 heater_bed: target=80 temp=80.1 pwm=0.321 sd_pos=643749 sysload=0.30 cputime=121.844 memavail=7297808 print_time=2415.924 buffer_time=2.228 print_stall=0 extruder: target=240 temp=240.2 pwm=0.358
Stats 790882.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2752774 bytes_read=885004 bytes_retransmit=9 bytes_invalid=0 send_seq=62964 receive_seq=62964 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992913 heater_bed: target=80 temp=80.1 pwm=0.407 sd_pos=645068 sysload=0.30 cputime=121.936 memavail=7297808 print_time=2416.729 buffer_time=2.032 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 790883.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2755880 bytes_read=885617 bytes_retransmit=9 bytes_invalid=0 send_seq=63025 receive_seq=63025 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=80.1 pwm=0.407 sd_pos=645413 sysload=0.52 cputime=122.009 memavail=7297320 print_time=2417.891 buffer_time=2.194 print_stall=0 extruder: target=240 temp=240.0 pwm=0.441
Stats 790884.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2758111 bytes_read=886130 bytes_retransmit=9 bytes_invalid=0 send_seq=63072 receive_seq=63072 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=80.1 pwm=0.368 sd_pos=646292 sysload=0.52 cputime=122.081 memavail=7297320 print_time=2419.039 buffer_time=2.341 print_stall=0 extruder: target=240 temp=239.9 pwm=0.490
Stats 790885.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2759679 bytes_read=886598 bytes_retransmit=9 bytes_invalid=0 send_seq=63107 receive_seq=63107 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992896 heater_bed: target=80 temp=80.1 pwm=0.382 sd_pos=646900 sysload=0.52 cputime=122.148 memavail=7297068 print_time=2419.802 buffer_time=2.103 print_stall=0 extruder: target=240 temp=239.8 pwm=0.509
Stats 790886.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2762414 bytes_read=887160 bytes_retransmit=9 bytes_invalid=0 send_seq=63161 receive_seq=63161 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992889 heater_bed: target=80 temp=80.1 pwm=0.265 sd_pos=647750 sysload=0.52 cputime=122.233 memavail=7297068 print_time=2420.841 buffer_time=2.142 print_stall=0 extruder: target=240 temp=240.1 pwm=0.432
Stats 790887.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2766311 bytes_read=887808 bytes_retransmit=9 bytes_invalid=0 send_seq=63235 receive_seq=63235 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992915 heater_bed: target=80 temp=80.1 pwm=0.290 sd_pos=649426 sysload=0.52 cputime=122.310 memavail=7296744 print_time=2421.876 buffer_time=2.175 print_stall=0 extruder: target=240 temp=240.0 pwm=0.492
Stats 790888.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2770621 bytes_read=888512 bytes_retransmit=9 bytes_invalid=0 send_seq=63314 receive_seq=63314 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119992908 heater_bed: target=80 temp=80.1 pwm=0.450 sd_pos=651207 sysload=0.47 cputime=122.365 memavail=7296816 print_time=2422.950 buffer_time=2.249 print_stall=0 extruder: target=240 temp=240.1 pwm=0.492
Stats 790889.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2773994 bytes_read=889129 bytes_retransmit=9 bytes_invalid=0 send_seq=63379 receive_seq=63379 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992898 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=652577 sysload=0.47 cputime=122.423 memavail=7296592 print_time=2423.755 buffer_time=2.054 print_stall=0 extruder: target=240 temp=240.1 pwm=0.489
Stats 790890.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2777696 bytes_read=889747 bytes_retransmit=9 bytes_invalid=0 send_seq=63447 receive_seq=63447 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992898 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=653662 sysload=0.47 cputime=122.482 memavail=7296352 print_time=2424.834 buffer_time=2.131 print_stall=0 extruder: target=240 temp=240.0 pwm=0.504
Stats 790891.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2778255 bytes_read=890130 bytes_retransmit=9 bytes_invalid=0 send_seq=63465 receive_seq=63465 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=80.0 pwm=0.379 sd_pos=653719 sysload=0.47 cputime=122.532 memavail=7295344 print_time=2425.807 buffer_time=2.104 print_stall=0 extruder: target=240 temp=240.1 pwm=0.419
Stats 790892.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2779162 bytes_read=890557 bytes_retransmit=9 bytes_invalid=0 send_seq=63492 receive_seq=63492 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992887 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=653974 sysload=0.47 cputime=122.583 memavail=7295344 print_time=2426.846 buffer_time=2.142 print_stall=0 extruder: target=240 temp=240.0 pwm=0.500
Stats 790893.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2780003 bytes_read=890966 bytes_retransmit=9 bytes_invalid=0 send_seq=63515 receive_seq=63515 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.0 pwm=0.510 sd_pos=654175 sysload=0.44 cputime=122.638 memavail=7295092 print_time=2427.760 buffer_time=2.057 print_stall=0 extruder: target=240 temp=240.2 pwm=0.395
Stats 790894.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2780370 bytes_read=891329 bytes_retransmit=9 bytes_invalid=0 send_seq=63529 receive_seq=63529 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992879 heater_bed: target=80 temp=79.9 pwm=0.510 sd_pos=654204 sysload=0.44 cputime=122.693 memavail=7295092 print_time=2429.246 buffer_time=2.542 print_stall=0 extruder: target=240 temp=240.0 pwm=0.472
Stats 790895.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2780989 bytes_read=891721 bytes_retransmit=9 bytes_invalid=0 send_seq=63549 receive_seq=63549 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=79.9 pwm=0.510 sd_pos=654255 sysload=0.44 cputime=122.744 memavail=7295092 print_time=2430.683 buffer_time=2.978 print_stall=0 extruder: target=240 temp=240.1 pwm=0.373
Stats 790896.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2781476 bytes_read=892084 bytes_retransmit=9 bytes_invalid=0 send_seq=63566 receive_seq=63566 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992869 heater_bed: target=80 temp=79.9 pwm=0.454 sd_pos=654255 sysload=0.44 cputime=122.800 memavail=7293844 print_time=2430.938 buffer_time=2.233 print_stall=0 extruder: target=240 temp=239.9 pwm=0.549
Stats 790897.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2781870 bytes_read=892447 bytes_retransmit=9 bytes_invalid=0 send_seq=63580 receive_seq=63580 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=79.9 pwm=0.493 sd_pos=654255 sysload=0.44 cputime=122.859 memavail=7293848 print_time=2431.978 buffer_time=2.272 print_stall=0 extruder: target=240 temp=239.9 pwm=0.515
Stats 790898.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2782257 bytes_read=892834 bytes_retransmit=9 bytes_invalid=0 send_seq=63596 receive_seq=63596 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992866 heater_bed: target=80 temp=79.9 pwm=0.493 sd_pos=654367 sysload=0.40 cputime=122.921 memavail=7293848 print_time=2433.265 buffer_time=2.558 print_stall=0 extruder: target=240 temp=239.8 pwm=0.576
Stats 790899.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2783204 bytes_read=893237 bytes_retransmit=9 bytes_invalid=0 send_seq=63622 receive_seq=63621 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992862 heater_bed: target=80 temp=79.9 pwm=0.351 sd_pos=654916 sysload=0.40 cputime=122.983 memavail=7293848 print_time=2434.415 buffer_time=2.702 print_stall=0 extruder: target=240 temp=240.1 pwm=0.475
Stats 790900.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2783710 bytes_read=893636 bytes_retransmit=9 bytes_invalid=0 send_seq=63640 receive_seq=63640 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=79.9 pwm=0.414 sd_pos=654971 sysload=0.40 cputime=123.046 memavail=7293848 print_time=2435.380 buffer_time=2.666 print_stall=0 extruder: target=240 temp=239.9 pwm=0.475
Stats 790901.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2784652 bytes_read=894056 bytes_retransmit=9 bytes_invalid=0 send_seq=63667 receive_seq=63667 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=80 temp=79.9 pwm=0.433 sd_pos=655442 sysload=0.40 cputime=123.114 memavail=7293848 print_time=2436.424 buffer_time=2.709 print_stall=0 extruder: target=240 temp=239.8 pwm=0.508
Stats 790902.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2785923 bytes_read=894477 bytes_retransmit=9 bytes_invalid=0 send_seq=63697 receive_seq=63697 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=79.9 pwm=0.383 sd_pos=655674 sysload=0.40 cputime=123.175 memavail=7293852 print_time=2436.995 buffer_time=2.280 print_stall=0 extruder: target=240 temp=239.9 pwm=0.458
Stats 790903.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2786442 bytes_read=894871 bytes_retransmit=9 bytes_invalid=0 send_seq=63715 receive_seq=63715 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992846 heater_bed: target=80 temp=80.0 pwm=0.383 sd_pos=655731 sysload=0.37 cputime=123.229 memavail=7293096 print_time=2437.756 buffer_time=2.039 print_stall=0 extruder: target=240 temp=239.8 pwm=0.501
Stats 790904.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2787639 bytes_read=895303 bytes_retransmit=9 bytes_invalid=0 send_seq=63743 receive_seq=63743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=80.0 pwm=0.383 sd_pos=655889 sysload=0.37 cputime=123.290 memavail=7293096 print_time=2439.400 buffer_time=2.683 print_stall=0 extruder: target=240 temp=240.0 pwm=0.448
Stats 790905.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2788236 bytes_read=895681 bytes_retransmit=9 bytes_invalid=0 send_seq=63763 receive_seq=63763 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.0 pwm=0.289 sd_pos=655975 sysload=0.37 cputime=123.342 memavail=7293096 print_time=2441.010 buffer_time=3.293 print_stall=0 extruder: target=240 temp=240.1 pwm=0.444
Stats 790906.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2788457 bytes_read=896049 bytes_retransmit=9 bytes_invalid=0 send_seq=63778 receive_seq=63778 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=655975 sysload=0.37 cputime=123.401 memavail=7293096 print_time=2441.010 buffer_time=2.293 print_stall=0 extruder: target=240 temp=240.3 pwm=0.349
Stats 790907.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2788720 bytes_read=896411 bytes_retransmit=9 bytes_invalid=0 send_seq=63792 receive_seq=63792 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992850 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=656003 sysload=0.37 cputime=123.465 memavail=7293096 print_time=2441.956 buffer_time=2.238 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 790908.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2789613 bytes_read=896819 bytes_retransmit=9 bytes_invalid=0 send_seq=63815 receive_seq=63815 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=656003 sysload=0.34 cputime=123.526 memavail=7293096 print_time=2442.962 buffer_time=2.243 print_stall=0 extruder: target=240 temp=240.0 pwm=0.501
Stats 790909.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2790175 bytes_read=897212 bytes_retransmit=9 bytes_invalid=0 send_seq=63835 receive_seq=63835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992842 heater_bed: target=80 temp=80.0 pwm=0.535 sd_pos=656117 sysload=0.34 cputime=123.593 memavail=7293096 print_time=2445.103 buffer_time=3.383 print_stall=0 extruder: target=240 temp=240.0 pwm=0.482
Stats 790910.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2790385 bytes_read=897579 bytes_retransmit=9 bytes_invalid=0 send_seq=63850 receive_seq=63850 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=656117 sysload=0.34 cputime=123.657 memavail=7293096 print_time=2445.103 buffer_time=2.381 print_stall=0 extruder: target=240 temp=240.2 pwm=0.382
Stats 790911.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2791265 bytes_read=897972 bytes_retransmit=9 bytes_invalid=0 send_seq=63873 receive_seq=63873 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992842 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=656289 sysload=0.34 cputime=123.726 memavail=7293096 print_time=2445.848 buffer_time=2.125 print_stall=0 extruder: target=240 temp=239.9 pwm=0.544
Stats 790912.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2791655 bytes_read=898350 bytes_retransmit=9 bytes_invalid=0 send_seq=63890 receive_seq=63890 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992841 heater_bed: target=80 temp=80.0 pwm=0.366 sd_pos=656344 sysload=0.34 cputime=123.799 memavail=7293096 print_time=2447.014 buffer_time=2.290 print_stall=0 extruder: target=240 temp=240.0 pwm=0.522
Stats 790913.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2792958 bytes_read=898822 bytes_retransmit=9 bytes_invalid=0 send_seq=63923 receive_seq=63923 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992841 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=656461 sysload=0.39 cputime=123.865 memavail=7296204 print_time=2448.053 buffer_time=2.327 print_stall=0 extruder: target=240 temp=240.0 pwm=0.494
Stats 790914.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2795380 bytes_read=899340 bytes_retransmit=9 bytes_invalid=0 send_seq=63971 receive_seq=63971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=656800 sysload=0.39 cputime=123.932 memavail=7296104 print_time=2448.743 buffer_time=2.017 print_stall=0 extruder: target=240 temp=240.0 pwm=0.506
Stats 790915.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2800077 bytes_read=900063 bytes_retransmit=9 bytes_invalid=0 send_seq=64057 receive_seq=64057 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=658207 sysload=0.39 cputime=124.018 memavail=7296104 print_time=2449.920 buffer_time=2.193 print_stall=0 extruder: target=240 temp=240.0 pwm=0.511
Stats 790916.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2803767 bytes_read=900705 bytes_retransmit=9 bytes_invalid=0 send_seq=64127 receive_seq=64127 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=80.0 pwm=0.302 sd_pos=659209 sysload=0.39 cputime=124.092 memavail=7295864 print_time=2450.836 buffer_time=2.109 print_stall=0 extruder: target=240 temp=240.0 pwm=0.511
Stats 790917.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2807130 bytes_read=901298 bytes_retransmit=9 bytes_invalid=0 send_seq=64190 receive_seq=64190 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992868 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=659822 sysload=0.39 cputime=124.181 memavail=7293772 print_time=2452.166 buffer_time=2.437 print_stall=0 extruder: target=240 temp=240.1 pwm=0.407
Stats 790918.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2809467 bytes_read=901842 bytes_retransmit=9 bytes_invalid=0 send_seq=64237 receive_seq=64237 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992864 heater_bed: target=80 temp=80.0 pwm=0.366 sd_pos=660319 sysload=0.44 cputime=124.241 memavail=7293844 print_time=2452.743 buffer_time=2.014 print_stall=0 extruder: target=240 temp=240.2 pwm=0.410
Stats 790919.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2814087 bytes_read=902559 bytes_retransmit=9 bytes_invalid=0 send_seq=64322 receive_seq=64322 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.367 sd_pos=661313 sysload=0.44 cputime=124.320 memavail=7293844 print_time=2454.001 buffer_time=2.272 print_stall=0 extruder: target=240 temp=239.9 pwm=0.567
Stats 790920.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2817617 bytes_read=903162 bytes_retransmit=9 bytes_invalid=0 send_seq=64387 receive_seq=64387 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992865 heater_bed: target=80 temp=80.0 pwm=0.367 sd_pos=662073 sysload=0.44 cputime=124.387 memavail=7297448 print_time=2454.945 buffer_time=2.215 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 790921.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2821747 bytes_read=903835 bytes_retransmit=9 bytes_invalid=0 send_seq=64463 receive_seq=64463 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=80.0 pwm=0.333 sd_pos=663105 sysload=0.44 cputime=124.463 memavail=7297584 print_time=2455.970 buffer_time=2.239 print_stall=0 extruder: target=240 temp=239.9 pwm=0.552
Stats 790922.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2825391 bytes_read=904482 bytes_retransmit=9 bytes_invalid=0 send_seq=64534 receive_seq=64534 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=80.0 pwm=0.382 sd_pos=664021 sysload=0.44 cputime=124.538 memavail=7297332 print_time=2456.837 buffer_time=2.106 print_stall=0 extruder: target=240 temp=240.3 pwm=0.401
Stats 790923.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2829936 bytes_read=905191 bytes_retransmit=9 bytes_invalid=0 send_seq=64617 receive_seq=64617 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=665485 sysload=0.49 cputime=124.609 memavail=7296352 print_time=2457.993 buffer_time=2.261 print_stall=0 extruder: target=240 temp=240.5 pwm=0.328
Stats 790924.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2833302 bytes_read=905804 bytes_retransmit=9 bytes_invalid=0 send_seq=64681 receive_seq=64681 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992865 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=666562 sysload=0.49 cputime=124.675 memavail=7296608 print_time=2458.833 buffer_time=2.101 print_stall=0 extruder: target=240 temp=240.3 pwm=0.399
Stats 790925.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2837993 bytes_read=906531 bytes_retransmit=9 bytes_invalid=0 send_seq=64768 receive_seq=64768 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992865 heater_bed: target=80 temp=80.0 pwm=0.294 sd_pos=667955 sysload=0.49 cputime=124.763 memavail=7296116 print_time=2459.982 buffer_time=2.249 print_stall=0 extruder: target=240 temp=240.1 pwm=0.443
Stats 790926.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2841374 bytes_read=907124 bytes_retransmit=9 bytes_invalid=0 send_seq=64831 receive_seq=64831 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992861 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=668952 sysload=0.49 cputime=124.842 memavail=7296116 print_time=2460.865 buffer_time=2.131 print_stall=0 extruder: target=240 temp=239.8 pwm=0.585
Stats 790927.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2845171 bytes_read=907777 bytes_retransmit=9 bytes_invalid=0 send_seq=64903 receive_seq=64903 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=670026 sysload=0.49 cputime=124.915 memavail=7296116 print_time=2461.791 buffer_time=2.055 print_stall=0 extruder: target=240 temp=239.9 pwm=0.497
Stats 790928.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2849553 bytes_read=908480 bytes_retransmit=9 bytes_invalid=0 send_seq=64982 receive_seq=64982 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992850 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=671408 sysload=0.61 cputime=124.995 memavail=7296116 print_time=2462.920 buffer_time=2.184 print_stall=0 extruder: target=240 temp=240.2 pwm=0.345
Stats 790929.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2853252 bytes_read=909103 bytes_retransmit=9 bytes_invalid=0 send_seq=65051 receive_seq=65051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=672491 sysload=0.61 cputime=125.061 memavail=7296116 print_time=2463.779 buffer_time=2.043 print_stall=0 extruder: target=240 temp=240.2 pwm=0.457
Stats 790930.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2857786 bytes_read=909811 bytes_retransmit=9 bytes_invalid=0 send_seq=65134 receive_seq=65134 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=673941 sysload=0.61 cputime=125.149 memavail=7296116 print_time=2464.885 buffer_time=2.148 print_stall=0 extruder: target=240 temp=239.8 pwm=0.635
Stats 790931.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2861573 bytes_read=910448 bytes_retransmit=9 bytes_invalid=0 send_seq=65203 receive_seq=65203 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.1 pwm=0.326 sd_pos=674974 sysload=0.61 cputime=125.222 memavail=7295108 print_time=2465.803 buffer_time=2.064 print_stall=0 extruder: target=240 temp=239.9 pwm=0.496
Stats 790932.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2866175 bytes_read=911146 bytes_retransmit=9 bytes_invalid=0 send_seq=65287 receive_seq=65287 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.1 pwm=0.367 sd_pos=676407 sysload=0.61 cputime=125.307 memavail=7295108 print_time=2466.932 buffer_time=2.193 print_stall=0 extruder: target=240 temp=239.9 pwm=0.499
Stats 790933.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2869882 bytes_read=911805 bytes_retransmit=9 bytes_invalid=0 send_seq=65357 receive_seq=65357 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=80.1 pwm=0.357 sd_pos=677479 sysload=0.56 cputime=125.372 memavail=7295108 print_time=2467.791 buffer_time=2.052 print_stall=0 extruder: target=240 temp=239.7 pwm=0.586
Stats 790934.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2874165 bytes_read=912492 bytes_retransmit=9 bytes_invalid=0 send_seq=65436 receive_seq=65436 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=678839 sysload=0.56 cputime=125.444 memavail=7294608 print_time=2468.899 buffer_time=2.159 print_stall=0 extruder: target=240 temp=239.8 pwm=0.515
Stats 790935.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2877121 bytes_read=913055 bytes_retransmit=9 bytes_invalid=0 send_seq=65493 receive_seq=65493 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119992920 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=679508 sysload=0.56 cputime=125.502 memavail=7293864 print_time=2472.174 buffer_time=4.434 print_stall=0 extruder: target=240 temp=239.9 pwm=0.515
Stats 790936.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2877311 bytes_read=913408 bytes_retransmit=9 bytes_invalid=0 send_seq=65505 receive_seq=65505 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992909 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=679508 sysload=0.56 cputime=125.534 memavail=7293416 print_time=2472.174 buffer_time=3.434 print_stall=0 extruder: target=240 temp=240.1 pwm=0.405
Stats 790937.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=2877537 bytes_read=913772 bytes_retransmit=9 bytes_invalid=0 send_seq=65521 receive_seq=65521 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992898 heater_bed: target=80 temp=80.0 pwm=0.515 sd_pos=679508 sysload=0.56 cputime=125.563 memavail=7293416 print_time=2472.174 buffer_time=2.434 print_stall=0 extruder: target=240 temp=240.2 pwm=0.429
Stats 790938.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2878548 bytes_read=914189 bytes_retransmit=9 bytes_invalid=0 send_seq=65547 receive_seq=65547 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992894 heater_bed: target=80 temp=80.0 pwm=0.490 sd_pos=680373 sysload=0.51 cputime=125.618 memavail=7292912 print_time=2473.156 buffer_time=2.415 print_stall=0 extruder: target=240 temp=239.9 pwm=0.552
Stats 790939.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2879690 bytes_read=914619 bytes_retransmit=9 bytes_invalid=0 send_seq=65575 receive_seq=65575 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=681179 sysload=0.51 cputime=125.662 memavail=7292912 print_time=2474.007 buffer_time=2.265 print_stall=0 extruder: target=240 temp=239.9 pwm=0.549
Stats 790940.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2880751 bytes_read=915041 bytes_retransmit=9 bytes_invalid=0 send_seq=65601 receive_seq=65601 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992891 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=681437 sysload=0.51 cputime=125.720 memavail=7292688 print_time=2475.833 buffer_time=3.090 print_stall=0 extruder: target=240 temp=240.0 pwm=0.442
Stats 790941.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2880940 bytes_read=915379 bytes_retransmit=9 bytes_invalid=0 send_seq=65613 receive_seq=65613 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992885 heater_bed: target=80 temp=79.9 pwm=0.496 sd_pos=681437 sysload=0.51 cputime=125.761 memavail=7296812 print_time=2475.833 buffer_time=2.090 print_stall=0 extruder: target=240 temp=239.8 pwm=0.513
Stats 790942.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2881369 bytes_read=915762 bytes_retransmit=9 bytes_invalid=0 send_seq=65631 receive_seq=65631 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992876 heater_bed: target=80 temp=79.9 pwm=0.458 sd_pos=681806 sysload=0.51 cputime=125.818 memavail=7295828 print_time=2477.243 buffer_time=2.499 print_stall=0 extruder: target=240 temp=239.8 pwm=0.500
Stats 790943.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2883925 bytes_read=916339 bytes_retransmit=9 bytes_invalid=0 send_seq=65685 receive_seq=65685 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=79.9 pwm=0.411 sd_pos=682634 sysload=0.47 cputime=125.881 memavail=7295604 print_time=2478.653 buffer_time=2.908 print_stall=0 extruder: target=240 temp=240.1 pwm=0.418
Stats 790944.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2884406 bytes_read=916707 bytes_retransmit=9 bytes_invalid=0 send_seq=65703 receive_seq=65703 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=79.9 pwm=0.345 sd_pos=682691 sysload=0.47 cputime=125.912 memavail=7295364 print_time=2479.626 buffer_time=2.881 print_stall=0 extruder: target=240 temp=240.0 pwm=0.503
Stats 790945.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2885328 bytes_read=917125 bytes_retransmit=9 bytes_invalid=0 send_seq=65728 receive_seq=65728 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992850 heater_bed: target=80 temp=79.9 pwm=0.504 sd_pos=682946 sysload=0.47 cputime=125.958 memavail=7295124 print_time=2480.665 buffer_time=2.919 print_stall=0 extruder: target=240 temp=239.9 pwm=0.508
Stats 790946.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2885938 bytes_read=917512 bytes_retransmit=9 bytes_invalid=0 send_seq=65747 receive_seq=65747 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992841 heater_bed: target=80 temp=79.9 pwm=0.408 sd_pos=683090 sysload=0.47 cputime=126.015 memavail=7295124 print_time=2481.450 buffer_time=2.703 print_stall=0 extruder: target=240 temp=239.7 pwm=0.566
Stats 790947.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2886587 bytes_read=917890 bytes_retransmit=9 bytes_invalid=0 send_seq=65767 receive_seq=65767 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992839 heater_bed: target=80 temp=80.0 pwm=0.330 sd_pos=683176 sysload=0.47 cputime=126.067 memavail=7294304 print_time=2483.065 buffer_time=3.318 print_stall=0 extruder: target=240 temp=239.7 pwm=0.545
Stats 790948.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2886784 bytes_read=918263 bytes_retransmit=9 bytes_invalid=0 send_seq=65780 receive_seq=65780 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=683176 sysload=0.43 cputime=126.128 memavail=7294384 print_time=2483.065 buffer_time=2.318 print_stall=0 extruder: target=240 temp=240.0 pwm=0.409
Stats 790949.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2887380 bytes_read=918650 bytes_retransmit=9 bytes_invalid=0 send_seq=65799 receive_seq=65799 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=683227 sysload=0.43 cputime=126.178 memavail=7294384 print_time=2484.503 buffer_time=2.755 print_stall=0 extruder: target=240 temp=240.4 pwm=0.367
Stats 790950.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2887918 bytes_read=919013 bytes_retransmit=9 bytes_invalid=0 send_seq=65816 receive_seq=65816 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=80 temp=79.9 pwm=0.494 sd_pos=683227 sysload=0.43 cputime=126.223 memavail=7294384 print_time=2484.758 buffer_time=2.009 print_stall=0 extruder: target=240 temp=240.6 pwm=0.381
Stats 790951.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2888261 bytes_read=919376 bytes_retransmit=9 bytes_invalid=0 send_seq=65830 receive_seq=65830 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=79.9 pwm=0.398 sd_pos=683227 sysload=0.43 cputime=126.270 memavail=7294384 print_time=2485.798 buffer_time=2.049 print_stall=0 extruder: target=240 temp=240.0 pwm=0.604
Stats 790952.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2888675 bytes_read=919753 bytes_retransmit=9 bytes_invalid=0 send_seq=65847 receive_seq=65847 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=79.9 pwm=0.455 sd_pos=683339 sysload=0.43 cputime=126.333 memavail=7294384 print_time=2487.084 buffer_time=2.334 print_stall=0 extruder: target=240 temp=239.8 pwm=0.596
Stats 790953.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2889595 bytes_read=920161 bytes_retransmit=9 bytes_invalid=0 send_seq=65870 receive_seq=65870 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.0 pwm=0.362 sd_pos=683887 sysload=0.40 cputime=126.399 memavail=7294028 print_time=2488.235 buffer_time=2.485 print_stall=0 extruder: target=240 temp=239.9 pwm=0.501
Stats 790954.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2890148 bytes_read=920559 bytes_retransmit=9 bytes_invalid=0 send_seq=65891 receive_seq=65891 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=79.9 pwm=0.429 sd_pos=683942 sysload=0.40 cputime=126.456 memavail=7293896 print_time=2489.199 buffer_time=2.449 print_stall=0 extruder: target=240 temp=240.3 pwm=0.292
Stats 790955.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2891070 bytes_read=920976 bytes_retransmit=9 bytes_invalid=0 send_seq=65916 receive_seq=65916 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992824 heater_bed: target=80 temp=79.9 pwm=0.429 sd_pos=684400 sysload=0.40 cputime=126.511 memavail=7293896 print_time=2490.243 buffer_time=2.492 print_stall=0 extruder: target=240 temp=240.2 pwm=0.402
Stats 790956.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2892363 bytes_read=921409 bytes_retransmit=9 bytes_invalid=0 send_seq=65947 receive_seq=65947 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992824 heater_bed: target=80 temp=79.9 pwm=0.435 sd_pos=684632 sysload=0.40 cputime=126.562 memavail=7293896 print_time=2490.814 buffer_time=2.063 print_stall=0 extruder: target=240 temp=240.1 pwm=0.462
Stats 790957.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2893948 bytes_read=921887 bytes_retransmit=9 bytes_invalid=0 send_seq=65984 receive_seq=65984 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=80.0 pwm=0.383 sd_pos=684845 sysload=0.40 cputime=126.624 memavail=7293896 print_time=2493.220 buffer_time=3.468 print_stall=0 extruder: target=240 temp=240.2 pwm=0.421
Stats 790958.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2894180 bytes_read=922269 bytes_retransmit=9 bytes_invalid=0 send_seq=65999 receive_seq=65999 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=79.9 pwm=0.512 sd_pos=684845 sysload=0.37 cputime=126.671 memavail=7294056 print_time=2493.220 buffer_time=2.467 print_stall=0 extruder: target=240 temp=240.0 pwm=0.516
Stats 790959.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2894745 bytes_read=922637 bytes_retransmit=9 bytes_invalid=0 send_seq=66017 receive_seq=66017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=79.9 pwm=0.411 sd_pos=684931 sysload=0.37 cputime=126.717 memavail=7294168 print_time=2494.830 buffer_time=3.076 print_stall=0 extruder: target=240 temp=240.3 pwm=0.373
Stats 790960.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2894955 bytes_read=923005 bytes_retransmit=9 bytes_invalid=0 send_seq=66032 receive_seq=66032 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=80.0 pwm=0.335 sd_pos=684931 sysload=0.37 cputime=126.760 memavail=7294168 print_time=2494.830 buffer_time=2.076 print_stall=0 extruder: target=240 temp=239.8 pwm=0.570
Stats 790961.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2895278 bytes_read=923393 bytes_retransmit=9 bytes_invalid=0 send_seq=66049 receive_seq=66049 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=80 temp=80.0 pwm=0.364 sd_pos=684971 sysload=0.37 cputime=126.816 memavail=7294168 print_time=2495.775 buffer_time=2.021 print_stall=0 extruder: target=240 temp=239.9 pwm=0.511
Stats 790962.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2896199 bytes_read=923796 bytes_retransmit=9 bytes_invalid=0 send_seq=66074 receive_seq=66074 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992835 heater_bed: target=80 temp=80.0 pwm=0.388 sd_pos=684971 sysload=0.37 cputime=126.864 memavail=7293928 print_time=2496.781 buffer_time=2.026 print_stall=0 extruder: target=240 temp=240.1 pwm=0.382
Stats 790963.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2896708 bytes_read=924184 bytes_retransmit=9 bytes_invalid=0 send_seq=66090 receive_seq=66090 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=685085 sysload=0.34 cputime=126.927 memavail=7293172 print_time=2498.922 buffer_time=3.167 print_stall=0 extruder: target=240 temp=240.3 pwm=0.382
Stats 790964.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2896924 bytes_read=924546 bytes_retransmit=9 bytes_invalid=0 send_seq=66104 receive_seq=66104 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=80.0 pwm=0.371 sd_pos=685085 sysload=0.34 cputime=126.982 memavail=7293176 print_time=2498.922 buffer_time=2.166 print_stall=0 extruder: target=240 temp=239.8 pwm=0.576
Stats 790965.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2897853 bytes_read=924929 bytes_retransmit=9 bytes_invalid=0 send_seq=66125 receive_seq=66125 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=80.0 pwm=0.371 sd_pos=685257 sysload=0.34 cputime=127.036 memavail=7293176 print_time=2500.113 buffer_time=2.355 print_stall=0 extruder: target=240 temp=240.0 pwm=0.495
Stats 790966.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2898120 bytes_read=925301 bytes_retransmit=9 bytes_invalid=0 send_seq=66138 receive_seq=66138 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119992889 heater_bed: target=80 temp=80.0 pwm=0.371 sd_pos=685312 sysload=0.34 cputime=127.092 memavail=7293176 print_time=2500.833 buffer_time=2.075 print_stall=0 extruder: target=240 temp=239.9 pwm=0.494
Stats 790967.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=2899385 bytes_read=925729 bytes_retransmit=9 bytes_invalid=0 send_seq=66168 receive_seq=66168 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992881 heater_bed: target=80 temp=80.0 pwm=0.371 sd_pos=685429 sysload=0.34 cputime=127.157 memavail=7293176 print_time=2501.872 buffer_time=2.113 print_stall=0 extruder: target=240 temp=240.1 pwm=0.440
Stats 790968.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2901918 bytes_read=926272 bytes_retransmit=9 bytes_invalid=0 send_seq=66218 receive_seq=66218 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992876 heater_bed: target=80 temp=80.0 pwm=0.331 sd_pos=685740 sysload=0.31 cputime=127.239 memavail=7293176 print_time=2502.983 buffer_time=2.223 print_stall=0 extruder: target=240 temp=240.1 pwm=0.426
Stats 790969.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2902846 bytes_read=926699 bytes_retransmit=9 bytes_invalid=0 send_seq=66242 receive_seq=66242 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992918 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=685884 sysload=0.31 cputime=127.322 memavail=7292672 print_time=2504.366 buffer_time=2.605 print_stall=0 extruder: target=240 temp=240.1 pwm=0.440
Stats 790970.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2903676 bytes_read=927092 bytes_retransmit=9 bytes_invalid=0 send_seq=66265 receive_seq=66265 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=685913 sysload=0.31 cputime=127.400 memavail=7292672 print_time=2505.412 buffer_time=2.650 print_stall=0 extruder: target=240 temp=240.1 pwm=0.454
Stats 790971.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2904338 bytes_read=927465 bytes_retransmit=9 bytes_invalid=0 send_seq=66284 receive_seq=66284 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992900 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=685942 sysload=0.31 cputime=127.473 memavail=7292672 print_time=2506.153 buffer_time=2.391 print_stall=0 extruder: target=240 temp=239.8 pwm=0.541
Stats 790972.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2904775 bytes_read=927860 bytes_retransmit=9 bytes_invalid=0 send_seq=66302 receive_seq=66302 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992889 heater_bed: target=80 temp=80.0 pwm=0.350 sd_pos=686001 sysload=0.31 cputime=127.550 memavail=7292672 print_time=2507.051 buffer_time=2.288 print_stall=0 extruder: target=240 temp=240.1 pwm=0.437
Stats 790973.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2905675 bytes_read=928266 bytes_retransmit=9 bytes_invalid=0 send_seq=66326 receive_seq=66326 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992909 heater_bed: target=80 temp=80.0 pwm=0.374 sd_pos=686088 sysload=0.28 cputime=127.633 memavail=7292424 print_time=2508.447 buffer_time=2.683 print_stall=0 extruder: target=240 temp=240.3 pwm=0.363
Stats 790974.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2906423 bytes_read=928637 bytes_retransmit=9 bytes_invalid=0 send_seq=66346 receive_seq=66346 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992898 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=686088 sysload=0.28 cputime=127.693 memavail=7292424 print_time=2508.896 buffer_time=2.131 print_stall=0 extruder: target=240 temp=240.1 pwm=0.446
Stats 790975.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2906759 bytes_read=929018 bytes_retransmit=9 bytes_invalid=0 send_seq=66361 receive_seq=66361 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992888 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=686146 sysload=0.28 cputime=127.748 memavail=7292424 print_time=2509.840 buffer_time=2.074 print_stall=0 extruder: target=240 temp=240.1 pwm=0.503
Stats 790976.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2907670 bytes_read=929421 bytes_retransmit=9 bytes_invalid=0 send_seq=66386 receive_seq=66386 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992880 heater_bed: target=80 temp=80.1 pwm=0.294 sd_pos=686203 sysload=0.28 cputime=127.800 memavail=7292424 print_time=2511.246 buffer_time=2.479 print_stall=0 extruder: target=240 temp=239.5 pwm=0.668
Stats 790977.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2908382 bytes_read=929804 bytes_retransmit=9 bytes_invalid=0 send_seq=66407 receive_seq=66407 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=686232 sysload=0.28 cputime=127.845 memavail=7292424 print_time=2511.713 buffer_time=1.946 print_stall=0 extruder: target=240 temp=239.7 pwm=0.593
Stats 790978.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2909279 bytes_read=930251 bytes_retransmit=9 bytes_invalid=0 send_seq=66432 receive_seq=66432 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992898 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=686261 sysload=0.26 cputime=127.905 memavail=7292928 print_time=2513.336 buffer_time=2.568 print_stall=0 extruder: target=240 temp=239.8 pwm=0.524
Stats 790979.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2909678 bytes_read=930609 bytes_retransmit=9 bytes_invalid=0 send_seq=66448 receive_seq=66448 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=686320 sysload=0.26 cputime=127.964 memavail=7292928 print_time=2514.107 buffer_time=2.337 print_stall=0 extruder: target=240 temp=239.9 pwm=0.444
Stats 790980.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2910529 bytes_read=930997 bytes_retransmit=9 bytes_invalid=0 send_seq=66470 receive_seq=66470 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992891 heater_bed: target=80 temp=80.1 pwm=0.411 sd_pos=686407 sysload=0.26 cputime=128.023 memavail=7292928 print_time=2515.580 buffer_time=2.810 print_stall=0 extruder: target=240 temp=240.0 pwm=0.444
Stats 790981.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2911298 bytes_read=931424 bytes_retransmit=9 bytes_invalid=0 send_seq=66494 receive_seq=66494 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992885 heater_bed: target=80 temp=80.1 pwm=0.361 sd_pos=686407 sysload=0.26 cputime=128.091 memavail=7292928 print_time=2516.208 buffer_time=2.438 print_stall=0 extruder: target=240 temp=239.8 pwm=0.528
Stats 790982.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2911676 bytes_read=931777 bytes_retransmit=9 bytes_invalid=0 send_seq=66509 receive_seq=66509 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=686466 sysload=0.26 cputime=128.148 memavail=7292928 print_time=2517.020 buffer_time=2.249 print_stall=0 extruder: target=240 temp=239.9 pwm=0.528
Stats 790983.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2912574 bytes_read=932190 bytes_retransmit=9 bytes_invalid=0 send_seq=66533 receive_seq=66533 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=80.1 pwm=0.423 sd_pos=686525 sysload=0.32 cputime=128.213 memavail=7292748 print_time=2518.523 buffer_time=2.752 print_stall=0 extruder: target=240 temp=239.5 pwm=0.648
Stats 790984.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2913415 bytes_read=932622 bytes_retransmit=9 bytes_invalid=0 send_seq=66558 receive_seq=66558 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992896 heater_bed: target=80 temp=80.1 pwm=0.343 sd_pos=686525 sysload=0.32 cputime=128.268 memavail=7296580 print_time=2519.173 buffer_time=2.401 print_stall=0 extruder: target=240 temp=239.7 pwm=0.540
Stats 790985.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2913778 bytes_read=932975 bytes_retransmit=9 bytes_invalid=0 send_seq=66573 receive_seq=66573 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992888 heater_bed: target=80 temp=80.1 pwm=0.343 sd_pos=686584 sysload=0.32 cputime=128.321 memavail=7295816 print_time=2520.037 buffer_time=2.264 print_stall=0 extruder: target=240 temp=239.8 pwm=0.491
Stats 790986.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2914702 bytes_read=933368 bytes_retransmit=9 bytes_invalid=0 send_seq=66596 receive_seq=66596 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992881 heater_bed: target=80 temp=80.1 pwm=0.288 sd_pos=686653 sysload=0.32 cputime=128.385 memavail=7295576 print_time=2521.593 buffer_time=2.819 print_stall=0 extruder: target=240 temp=239.8 pwm=0.521
Stats 790987.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2915494 bytes_read=933790 bytes_retransmit=9 bytes_invalid=0 send_seq=66619 receive_seq=66619 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=80.1 pwm=0.317 sd_pos=686653 sysload=0.32 cputime=128.445 memavail=7295352 print_time=2522.242 buffer_time=2.468 print_stall=0 extruder: target=240 temp=239.9 pwm=0.444
Stats 790988.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2915929 bytes_read=934173 bytes_retransmit=9 bytes_invalid=0 send_seq=66637 receive_seq=66637 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992886 heater_bed: target=80 temp=80.1 pwm=0.380 sd_pos=686712 sysload=0.46 cputime=128.501 memavail=7295352 print_time=2523.159 buffer_time=2.384 print_stall=0 extruder: target=240 temp=239.9 pwm=0.463
Stats 790989.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2916841 bytes_read=934571 bytes_retransmit=9 bytes_invalid=0 send_seq=66661 receive_seq=66661 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992876 heater_bed: target=80 temp=80.1 pwm=0.381 sd_pos=686782 sysload=0.46 cputime=128.567 memavail=7298504 print_time=2524.768 buffer_time=2.991 print_stall=0 extruder: target=240 temp=239.8 pwm=0.580
Stats 790990.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2917688 bytes_read=934998 bytes_retransmit=9 bytes_invalid=0 send_seq=66685 receive_seq=66685 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=80.1 pwm=0.369 sd_pos=686782 sysload=0.46 cputime=128.630 memavail=7298016 print_time=2525.417 buffer_time=2.640 print_stall=0 extruder: target=240 temp=239.9 pwm=0.508
Stats 790991.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2918088 bytes_read=935351 bytes_retransmit=9 bytes_invalid=0 send_seq=66700 receive_seq=66700 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992903 heater_bed: target=80 temp=80.1 pwm=0.430 sd_pos=686841 sysload=0.46 cputime=128.687 memavail=7298016 print_time=2526.386 buffer_time=2.609 print_stall=0 extruder: target=240 temp=239.9 pwm=0.563
Stats 790992.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2918790 bytes_read=935739 bytes_retransmit=9 bytes_invalid=0 send_seq=66719 receive_seq=66719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992903 heater_bed: target=80 temp=80.1 pwm=0.287 sd_pos=686841 sysload=0.46 cputime=128.752 memavail=7298016 print_time=2526.847 buffer_time=2.069 print_stall=0 extruder: target=240 temp=239.7 pwm=0.621
Stats 790993.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2919247 bytes_read=936141 bytes_retransmit=9 bytes_invalid=0 send_seq=66738 receive_seq=66738 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992896 heater_bed: target=80 temp=80.1 pwm=0.371 sd_pos=686968 sysload=0.50 cputime=128.816 memavail=7297260 print_time=2528.073 buffer_time=2.294 print_stall=0 extruder: target=240 temp=239.6 pwm=0.644
Stats 790994.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2920169 bytes_read=936544 bytes_retransmit=9 bytes_invalid=0 send_seq=66763 receive_seq=66763 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992894 heater_bed: target=80 temp=80.1 pwm=0.371 sd_pos=686998 sysload=0.50 cputime=128.871 memavail=7297268 print_time=2529.510 buffer_time=2.730 print_stall=0 extruder: target=240 temp=239.8 pwm=0.499
Stats 790995.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2920943 bytes_read=936942 bytes_retransmit=9 bytes_invalid=0 send_seq=66784 receive_seq=66784 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992884 heater_bed: target=80 temp=80.1 pwm=0.419 sd_pos=687027 sysload=0.50 cputime=128.920 memavail=7297268 print_time=2530.219 buffer_time=2.439 print_stall=0 extruder: target=240 temp=239.9 pwm=0.499
Stats 790996.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2921440 bytes_read=937329 bytes_retransmit=9 bytes_invalid=0 send_seq=66803 receive_seq=66803 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=80.1 pwm=0.324 sd_pos=687086 sysload=0.50 cputime=128.987 memavail=7296568 print_time=2531.519 buffer_time=2.738 print_stall=0 extruder: target=240 temp=240.0 pwm=0.522
Stats 790997.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=2922253 bytes_read=937727 bytes_retransmit=9 bytes_invalid=0 send_seq=66827 receive_seq=66827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992880 heater_bed: target=80 temp=80.1 pwm=0.397 sd_pos=687086 sysload=0.50 cputime=129.034 memavail=7296716 print_time=2532.378 buffer_time=2.596 print_stall=0 extruder: target=240 temp=239.9 pwm=0.611
Stats 790998.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2922575 bytes_read=938100 bytes_retransmit=9 bytes_invalid=0 send_seq=66840 receive_seq=66840 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992872 heater_bed: target=80 temp=80.1 pwm=0.333 sd_pos=687144 sysload=0.46 cputime=129.085 memavail=7296568 print_time=2533.328 buffer_time=2.546 print_stall=0 extruder: target=240 temp=240.1 pwm=0.461
Stats 790999.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2923321 bytes_read=938507 bytes_retransmit=9 bytes_invalid=0 send_seq=66863 receive_seq=66863 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992862 heater_bed: target=80 temp=80.1 pwm=0.430 sd_pos=687144 sysload=0.46 cputime=129.141 memavail=7296568 print_time=2533.789 buffer_time=2.006 print_stall=0 extruder: target=240 temp=239.8 pwm=0.587
Stats 791000.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2923757 bytes_read=938870 bytes_retransmit=9 bytes_invalid=0 send_seq=66880 receive_seq=66880 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992912 heater_bed: target=80 temp=80.1 pwm=0.430 sd_pos=687203 sysload=0.46 cputime=129.199 memavail=7296328 print_time=2535.191 buffer_time=2.408 print_stall=0 extruder: target=240 temp=240.0 pwm=0.483
Stats 791001.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2924507 bytes_read=939263 bytes_retransmit=9 bytes_invalid=0 send_seq=66900 receive_seq=66900 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=80.1 pwm=0.430 sd_pos=687203 sysload=0.46 cputime=129.242 memavail=7296328 print_time=2536.050 buffer_time=2.267 print_stall=0 extruder: target=240 temp=240.0 pwm=0.550
Stats 791002.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2924834 bytes_read=939625 bytes_retransmit=9 bytes_invalid=0 send_seq=66914 receive_seq=66914 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=80.1 pwm=0.386 sd_pos=687232 sysload=0.46 cputime=129.297 memavail=7296328 print_time=2536.850 buffer_time=2.066 print_stall=0 extruder: target=240 temp=240.1 pwm=0.475
Stats 791003.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2925715 bytes_read=940033 bytes_retransmit=9 bytes_invalid=0 send_seq=66937 receive_seq=66937 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.1 pwm=0.329 sd_pos=687261 sysload=0.42 cputime=129.340 memavail=7295320 print_time=2537.963 buffer_time=2.179 print_stall=0 extruder: target=240 temp=240.0 pwm=0.580
Stats 791004.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2926121 bytes_read=940411 bytes_retransmit=9 bytes_invalid=0 send_seq=66954 receive_seq=66954 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.0 pwm=0.497 sd_pos=687320 sysload=0.42 cputime=129.388 memavail=7295320 print_time=2539.067 buffer_time=2.281 print_stall=0 extruder: target=240 temp=240.3 pwm=0.391
Stats 791005.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2926921 bytes_read=940823 bytes_retransmit=9 bytes_invalid=0 send_seq=66978 receive_seq=66978 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992942 heater_bed: target=80 temp=80.0 pwm=0.500 sd_pos=687320 sysload=0.42 cputime=129.448 memavail=7295320 print_time=2539.926 buffer_time=2.140 print_stall=0 extruder: target=240 temp=239.8 pwm=0.615
Stats 791006.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2927331 bytes_read=941176 bytes_retransmit=9 bytes_invalid=0 send_seq=66993 receive_seq=66993 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992931 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=687379 sysload=0.42 cputime=129.497 memavail=7295320 print_time=2541.080 buffer_time=2.294 print_stall=0 extruder: target=240 temp=240.2 pwm=0.446
Stats 791007.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=2928174 bytes_read=941584 bytes_retransmit=9 bytes_invalid=0 send_seq=67016 receive_seq=67016 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=687466 sysload=0.42 cputime=129.554 memavail=7294996 print_time=2542.117 buffer_time=2.330 print_stall=0 extruder: target=240 temp=240.1 pwm=0.496
Stats 791008.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2929023 bytes_read=942007 bytes_retransmit=9 bytes_invalid=0 send_seq=67040 receive_seq=67040 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992914 heater_bed: target=80 temp=80.0 pwm=0.376 sd_pos=687524 sysload=0.39 cputime=129.612 memavail=7294568 print_time=2543.085 buffer_time=2.297 print_stall=0 extruder: target=240 temp=240.2 pwm=0.433
Stats 791009.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2929846 bytes_read=942388 bytes_retransmit=9 bytes_invalid=0 send_seq=67062 receive_seq=67062 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992915 heater_bed: target=80 temp=80.0 pwm=0.376 sd_pos=687611 sysload=0.39 cputime=129.673 memavail=7294568 print_time=2544.085 buffer_time=2.296 print_stall=0 extruder: target=240 temp=240.1 pwm=0.536
Stats 791010.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2930669 bytes_read=942794 bytes_retransmit=9 bytes_invalid=0 send_seq=67086 receive_seq=67086 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=687670 sysload=0.39 cputime=129.742 memavail=7293560 print_time=2545.005 buffer_time=2.216 print_stall=0 extruder: target=240 temp=240.2 pwm=0.467
Stats 791011.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2931473 bytes_read=943206 bytes_retransmit=9 bytes_invalid=0 send_seq=67110 receive_seq=67110 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992890 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=687729 sysload=0.39 cputime=129.800 memavail=7293560 print_time=2545.961 buffer_time=2.171 print_stall=0 extruder: target=240 temp=239.8 pwm=0.660
Stats 791012.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2932295 bytes_read=943604 bytes_retransmit=9 bytes_invalid=0 send_seq=67134 receive_seq=67134 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992879 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=687787 sysload=0.39 cputime=129.854 memavail=7293560 print_time=2546.904 buffer_time=2.113 print_stall=0 extruder: target=240 temp=239.9 pwm=0.569
Stats 791013.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2933108 bytes_read=944027 bytes_retransmit=9 bytes_invalid=0 send_seq=67157 receive_seq=67157 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=687845 sysload=0.44 cputime=129.908 memavail=7292804 print_time=2547.860 buffer_time=2.068 print_stall=0 extruder: target=240 temp=239.8 pwm=0.630
Stats 791014.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2933939 bytes_read=944439 bytes_retransmit=9 bytes_invalid=0 send_seq=67181 receive_seq=67181 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.386 sd_pos=687914 sysload=0.44 cputime=129.969 memavail=7292808 print_time=2548.803 buffer_time=2.010 print_stall=0 extruder: target=240 temp=240.1 pwm=0.511
Stats 791015.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2935370 bytes_read=944877 bytes_retransmit=9 bytes_invalid=0 send_seq=67213 receive_seq=67213 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992858 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=688030 sysload=0.44 cputime=130.028 memavail=7295504 print_time=2550.702 buffer_time=2.909 print_stall=0 extruder: target=240 temp=239.9 pwm=0.572
Stats 791016.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2936181 bytes_read=945280 bytes_retransmit=9 bytes_invalid=0 send_seq=67235 receive_seq=67235 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=688087 sysload=0.44 cputime=130.085 memavail=7294748 print_time=2551.658 buffer_time=2.864 print_stall=0 extruder: target=240 temp=239.9 pwm=0.575
Stats 791017.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2937044 bytes_read=945692 bytes_retransmit=9 bytes_invalid=0 send_seq=67259 receive_seq=67259 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=79.9 pwm=0.446 sd_pos=688157 sysload=0.44 cputime=130.144 memavail=7294748 print_time=2552.601 buffer_time=2.806 print_stall=0 extruder: target=240 temp=240.1 pwm=0.492
Stats 791018.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2937847 bytes_read=946100 bytes_retransmit=9 bytes_invalid=0 send_seq=67282 receive_seq=67282 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992884 heater_bed: target=80 temp=79.9 pwm=0.444 sd_pos=688214 sysload=0.48 cputime=130.202 memavail=7294748 print_time=2553.557 buffer_time=2.761 print_stall=0 extruder: target=240 temp=240.0 pwm=0.562
Stats 791019.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2938720 bytes_read=946503 bytes_retransmit=9 bytes_invalid=0 send_seq=67304 receive_seq=67304 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992891 heater_bed: target=80 temp=79.9 pwm=0.412 sd_pos=688271 sysload=0.48 cputime=130.260 memavail=7294748 print_time=2554.500 buffer_time=2.704 print_stall=0 extruder: target=240 temp=240.0 pwm=0.562
Stats 791020.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2939551 bytes_read=946915 bytes_retransmit=9 bytes_invalid=0 send_seq=67328 receive_seq=67328 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992883 heater_bed: target=80 temp=79.9 pwm=0.493 sd_pos=688329 sysload=0.48 cputime=130.319 memavail=7294748 print_time=2555.456 buffer_time=2.659 print_stall=0 extruder: target=240 temp=240.0 pwm=0.564
Stats 791021.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2940366 bytes_read=947303 bytes_retransmit=9 bytes_invalid=0 send_seq=67350 receive_seq=67350 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992878 heater_bed: target=80 temp=79.9 pwm=0.417 sd_pos=688385 sysload=0.48 cputime=130.373 memavail=7294748 print_time=2556.399 buffer_time=2.601 print_stall=0 extruder: target=240 temp=240.1 pwm=0.491
Stats 791022.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2941204 bytes_read=947711 bytes_retransmit=9 bytes_invalid=0 send_seq=67373 receive_seq=67373 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992897 heater_bed: target=80 temp=79.9 pwm=0.494 sd_pos=688444 sysload=0.48 cputime=130.432 memavail=7294508 print_time=2557.355 buffer_time=2.557 print_stall=0 extruder: target=240 temp=239.9 pwm=0.628
Stats 791023.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2942047 bytes_read=948159 bytes_retransmit=9 bytes_invalid=0 send_seq=67399 receive_seq=67399 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992878 heater_bed: target=80 temp=79.8 pwm=0.538 sd_pos=688500 sysload=0.52 cputime=130.494 memavail=7293756 print_time=2558.298 buffer_time=2.499 print_stall=0 extruder: target=240 temp=239.8 pwm=0.670
Stats 791024.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2942886 bytes_read=948557 bytes_retransmit=9 bytes_invalid=0 send_seq=67423 receive_seq=67423 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992869 heater_bed: target=80 temp=79.8 pwm=0.516 sd_pos=688558 sysload=0.52 cputime=130.556 memavail=7293756 print_time=2559.254 buffer_time=2.454 print_stall=0 extruder: target=240 temp=239.9 pwm=0.582
Stats 791025.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2943704 bytes_read=948965 bytes_retransmit=9 bytes_invalid=0 send_seq=67446 receive_seq=67446 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992862 heater_bed: target=80 temp=79.8 pwm=0.402 sd_pos=688614 sysload=0.52 cputime=130.621 memavail=7293756 print_time=2560.196 buffer_time=2.396 print_stall=0 extruder: target=240 temp=239.8 pwm=0.577
Stats 791026.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2944538 bytes_read=949377 bytes_retransmit=9 bytes_invalid=0 send_seq=67470 receive_seq=67470 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992862 heater_bed: target=80 temp=79.8 pwm=0.505 sd_pos=688672 sysload=0.52 cputime=130.693 memavail=7293532 print_time=2561.152 buffer_time=2.351 print_stall=0 extruder: target=240 temp=240.1 pwm=0.474
Stats 791027.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2945358 bytes_read=949775 bytes_retransmit=9 bytes_invalid=0 send_seq=67494 receive_seq=67494 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=79.8 pwm=0.505 sd_pos=688728 sysload=0.52 cputime=130.744 memavail=7293532 print_time=2562.095 buffer_time=2.293 print_stall=0 extruder: target=240 temp=240.1 pwm=0.453
Stats 791028.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2946194 bytes_read=950203 bytes_retransmit=9 bytes_invalid=0 send_seq=67518 receive_seq=67518 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=79.8 pwm=0.442 sd_pos=688786 sysload=0.56 cputime=130.799 memavail=7293532 print_time=2563.051 buffer_time=2.248 print_stall=0 extruder: target=240 temp=240.3 pwm=0.406
Stats 791029.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2947046 bytes_read=950620 bytes_retransmit=9 bytes_invalid=0 send_seq=67543 receive_seq=67543 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992828 heater_bed: target=80 temp=79.8 pwm=0.503 sd_pos=688841 sysload=0.56 cputime=130.854 memavail=7293680 print_time=2563.994 buffer_time=2.189 print_stall=0 extruder: target=240 temp=239.9 pwm=0.593
Stats 791030.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2947874 bytes_read=951018 bytes_retransmit=9 bytes_invalid=0 send_seq=67567 receive_seq=67567 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=79.8 pwm=0.503 sd_pos=688900 sysload=0.56 cputime=130.903 memavail=7296688 print_time=2564.950 buffer_time=2.144 print_stall=0 extruder: target=240 temp=240.0 pwm=0.537
Stats 791031.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2948705 bytes_read=951426 bytes_retransmit=9 bytes_invalid=0 send_seq=67590 receive_seq=67590 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=79.8 pwm=0.513 sd_pos=688956 sysload=0.56 cputime=130.941 memavail=7296688 print_time=2565.893 buffer_time=2.086 print_stall=0 extruder: target=240 temp=239.8 pwm=0.653
Stats 791032.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2949561 bytes_read=951838 bytes_retransmit=9 bytes_invalid=0 send_seq=67614 receive_seq=67614 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=80 temp=79.8 pwm=0.475 sd_pos=689013 sysload=0.56 cputime=131.000 memavail=7296688 print_time=2566.849 buffer_time=2.041 print_stall=0 extruder: target=240 temp=239.9 pwm=0.551
Stats 791033.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2951005 bytes_read=952301 bytes_retransmit=9 bytes_invalid=0 send_seq=67648 receive_seq=67648 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=79.7 pwm=0.552 sd_pos=689127 sysload=0.60 cputime=131.055 memavail=7296436 print_time=2568.748 buffer_time=2.939 print_stall=0 extruder: target=240 temp=239.8 pwm=0.627
Stats 791034.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2951839 bytes_read=952719 bytes_retransmit=9 bytes_invalid=0 send_seq=67673 receive_seq=67673 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119992806 heater_bed: target=80 temp=79.7 pwm=0.519 sd_pos=689184 sysload=0.60 cputime=131.108 memavail=7296440 print_time=2569.691 buffer_time=2.881 print_stall=0 extruder: target=240 temp=239.7 pwm=0.650
Stats 791035.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2952656 bytes_read=953131 bytes_retransmit=9 bytes_invalid=0 send_seq=67697 receive_seq=67697 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=79.7 pwm=0.519 sd_pos=689240 sysload=0.60 cputime=131.161 memavail=7295948 print_time=2570.647 buffer_time=2.837 print_stall=0 extruder: target=240 temp=240.1 pwm=0.496
Stats 791036.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2953430 bytes_read=953514 bytes_retransmit=9 bytes_invalid=0 send_seq=67718 receive_seq=67718 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=79.7 pwm=0.519 sd_pos=689296 sysload=0.60 cputime=131.199 memavail=7299068 print_time=2571.590 buffer_time=2.779 print_stall=0 extruder: target=240 temp=240.0 pwm=0.580
Stats 791037.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2954228 bytes_read=953917 bytes_retransmit=9 bytes_invalid=0 send_seq=67740 receive_seq=67740 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=79.7 pwm=0.464 sd_pos=689352 sysload=0.60 cputime=131.247 memavail=7297836 print_time=2572.546 buffer_time=2.734 print_stall=0 extruder: target=240 temp=240.1 pwm=0.542
Stats 791038.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2955076 bytes_read=954349 bytes_retransmit=9 bytes_invalid=0 send_seq=67765 receive_seq=67765 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=79.7 pwm=0.445 sd_pos=689408 sysload=0.55 cputime=131.290 memavail=7297924 print_time=2573.488 buffer_time=2.676 print_stall=0 extruder: target=240 temp=240.0 pwm=0.589
Stats 791039.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2955856 bytes_read=954737 bytes_retransmit=9 bytes_invalid=0 send_seq=67787 receive_seq=67787 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=79.7 pwm=0.500 sd_pos=689464 sysload=0.55 cputime=131.325 memavail=7297924 print_time=2574.444 buffer_time=2.632 print_stall=0 extruder: target=240 temp=240.1 pwm=0.504
Stats 791040.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2956645 bytes_read=955135 bytes_retransmit=9 bytes_invalid=0 send_seq=67808 receive_seq=67808 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=79.7 pwm=0.445 sd_pos=689519 sysload=0.55 cputime=131.369 memavail=7296664 print_time=2575.387 buffer_time=2.574 print_stall=0 extruder: target=240 temp=240.2 pwm=0.504
Stats 791041.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2957466 bytes_read=955552 bytes_retransmit=9 bytes_invalid=0 send_seq=67833 receive_seq=67833 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=79.7 pwm=0.565 sd_pos=689575 sysload=0.55 cputime=131.420 memavail=7296664 print_time=2576.343 buffer_time=2.530 print_stall=0 extruder: target=240 temp=239.9 pwm=0.570
Stats 791042.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2958254 bytes_read=955935 bytes_retransmit=9 bytes_invalid=0 send_seq=67854 receive_seq=67854 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=79.7 pwm=0.543 sd_pos=689644 sysload=0.55 cputime=131.469 memavail=7296664 print_time=2577.286 buffer_time=2.471 print_stall=0 extruder: target=240 temp=239.9 pwm=0.517
Stats 791043.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2959049 bytes_read=956358 bytes_retransmit=9 bytes_invalid=0 send_seq=67877 receive_seq=67877 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=79.7 pwm=0.471 sd_pos=689699 sysload=0.59 cputime=131.523 memavail=7295908 print_time=2578.242 buffer_time=2.426 print_stall=0 extruder: target=240 temp=240.1 pwm=0.514
Stats 791044.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2959872 bytes_read=956764 bytes_retransmit=9 bytes_invalid=0 send_seq=67901 receive_seq=67901 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=79.7 pwm=0.514 sd_pos=689755 sysload=0.59 cputime=131.575 memavail=7295908 print_time=2579.185 buffer_time=2.368 print_stall=0 extruder: target=240 temp=240.1 pwm=0.518
Stats 791045.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2960693 bytes_read=957150 bytes_retransmit=9 bytes_invalid=0 send_seq=67924 receive_seq=67924 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=79.7 pwm=0.575 sd_pos=689823 sysload=0.59 cputime=131.626 memavail=7295908 print_time=2580.141 buffer_time=2.324 print_stall=0 extruder: target=240 temp=240.1 pwm=0.556
Stats 791046.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2961524 bytes_read=957563 bytes_retransmit=9 bytes_invalid=0 send_seq=67949 receive_seq=67949 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=79.7 pwm=0.515 sd_pos=689879 sysload=0.59 cputime=131.676 memavail=7295908 print_time=2581.084 buffer_time=2.266 print_stall=0 extruder: target=240 temp=240.2 pwm=0.448
Stats 791047.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2962381 bytes_read=957985 bytes_retransmit=9 bytes_invalid=0 send_seq=67975 receive_seq=67975 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=79.7 pwm=0.439 sd_pos=689935 sysload=0.59 cputime=131.726 memavail=7295908 print_time=2582.040 buffer_time=2.221 print_stall=0 extruder: target=240 temp=239.8 pwm=0.657
Stats 791048.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2963181 bytes_read=958393 bytes_retransmit=9 bytes_invalid=0 send_seq=67998 receive_seq=67998 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992806 heater_bed: target=80 temp=79.7 pwm=0.548 sd_pos=689991 sysload=0.54 cputime=131.777 memavail=7295912 print_time=2582.983 buffer_time=2.164 print_stall=0 extruder: target=240 temp=240.1 pwm=0.489
Stats 791049.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2963985 bytes_read=958796 bytes_retransmit=9 bytes_invalid=0 send_seq=68020 receive_seq=68020 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992801 heater_bed: target=80 temp=79.7 pwm=0.548 sd_pos=690047 sysload=0.54 cputime=131.828 memavail=7295912 print_time=2583.939 buffer_time=2.119 print_stall=0 extruder: target=240 temp=239.9 pwm=0.549
Stats 791050.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2964799 bytes_read=959208 bytes_retransmit=9 bytes_invalid=0 send_seq=68044 receive_seq=68044 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=79.6 pwm=0.548 sd_pos=690116 sysload=0.54 cputime=131.877 memavail=7295912 print_time=2584.881 buffer_time=2.062 print_stall=0 extruder: target=240 temp=239.9 pwm=0.598
Stats 791051.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2965568 bytes_read=959596 bytes_retransmit=9 bytes_invalid=0 send_seq=68066 receive_seq=68066 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=79.7 pwm=0.548 sd_pos=690172 sysload=0.54 cputime=131.921 memavail=7295912 print_time=2585.837 buffer_time=2.017 print_stall=0 extruder: target=240 temp=239.8 pwm=0.630
Stats 791052.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2966974 bytes_read=960054 bytes_retransmit=9 bytes_invalid=0 send_seq=68099 receive_seq=68099 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=79.6 pwm=0.554 sd_pos=690296 sysload=0.54 cputime=131.968 memavail=7295912 print_time=2587.736 buffer_time=2.915 print_stall=0 extruder: target=240 temp=240.1 pwm=0.491
Stats 791053.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2967811 bytes_read=960481 bytes_retransmit=9 bytes_invalid=0 send_seq=68123 receive_seq=68123 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=79.6 pwm=0.554 sd_pos=690350 sysload=0.49 cputime=132.011 memavail=7294932 print_time=2588.679 buffer_time=2.858 print_stall=0 extruder: target=240 temp=239.9 pwm=0.598
Stats 791054.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2968622 bytes_read=960874 bytes_retransmit=9 bytes_invalid=0 send_seq=68146 receive_seq=68146 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=79.6 pwm=0.466 sd_pos=690407 sysload=0.49 cputime=132.062 memavail=7294936 print_time=2589.635 buffer_time=2.813 print_stall=0 extruder: target=240 temp=240.1 pwm=0.478
Stats 791055.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2969416 bytes_read=961277 bytes_retransmit=9 bytes_invalid=0 send_seq=68168 receive_seq=68168 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=79.7 pwm=0.519 sd_pos=690463 sysload=0.49 cputime=132.113 memavail=7294936 print_time=2590.578 buffer_time=2.755 print_stall=0 extruder: target=240 temp=240.0 pwm=0.571
Stats 791056.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2970229 bytes_read=961689 bytes_retransmit=9 bytes_invalid=0 send_seq=68192 receive_seq=68192 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=79.7 pwm=0.497 sd_pos=690517 sysload=0.49 cputime=132.162 memavail=7294712 print_time=2591.534 buffer_time=2.710 print_stall=0 extruder: target=240 temp=239.9 pwm=0.576
Stats 791057.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2970970 bytes_read=962072 bytes_retransmit=9 bytes_invalid=0 send_seq=68213 receive_seq=68213 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=79.7 pwm=0.497 sd_pos=690574 sysload=0.49 cputime=132.209 memavail=7294712 print_time=2592.477 buffer_time=2.652 print_stall=0 extruder: target=240 temp=240.1 pwm=0.501
Stats 791058.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2971750 bytes_read=962495 bytes_retransmit=9 bytes_invalid=0 send_seq=68236 receive_seq=68236 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992824 heater_bed: target=80 temp=79.6 pwm=0.553 sd_pos=690630 sysload=0.54 cputime=132.256 memavail=7294712 print_time=2593.433 buffer_time=2.607 print_stall=0 extruder: target=240 temp=240.2 pwm=0.468
Stats 791059.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2972557 bytes_read=962912 bytes_retransmit=9 bytes_invalid=0 send_seq=68261 receive_seq=68261 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=79.7 pwm=0.458 sd_pos=690686 sysload=0.54 cputime=132.306 memavail=7294488 print_time=2594.376 buffer_time=2.550 print_stall=0 extruder: target=240 temp=240.0 pwm=0.544
Stats 791060.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2973330 bytes_read=963300 bytes_retransmit=9 bytes_invalid=0 send_seq=68283 receive_seq=68283 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=79.7 pwm=0.474 sd_pos=690742 sysload=0.54 cputime=132.357 memavail=7294488 print_time=2595.332 buffer_time=2.506 print_stall=0 extruder: target=240 temp=240.0 pwm=0.544
Stats 791061.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2974065 bytes_read=963693 bytes_retransmit=9 bytes_invalid=0 send_seq=68303 receive_seq=68303 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=79.7 pwm=0.474 sd_pos=690798 sysload=0.54 cputime=132.407 memavail=7294488 print_time=2596.275 buffer_time=2.447 print_stall=0 extruder: target=240 temp=240.1 pwm=0.544
Stats 791062.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2974891 bytes_read=964105 bytes_retransmit=9 bytes_invalid=0 send_seq=68327 receive_seq=68327 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=79.7 pwm=0.526 sd_pos=690855 sysload=0.54 cputime=132.475 memavail=7294060 print_time=2597.231 buffer_time=2.403 print_stall=0 extruder: target=240 temp=240.3 pwm=0.428
Stats 791063.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2975660 bytes_read=964503 bytes_retransmit=9 bytes_invalid=0 send_seq=68348 receive_seq=68348 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=79.7 pwm=0.526 sd_pos=690911 sysload=0.49 cputime=132.522 memavail=7294460 print_time=2598.173 buffer_time=2.345 print_stall=0 extruder: target=240 temp=240.2 pwm=0.443
Stats 791064.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2976430 bytes_read=964911 bytes_retransmit=9 bytes_invalid=0 send_seq=68371 receive_seq=68371 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992798 heater_bed: target=80 temp=79.7 pwm=0.645 sd_pos=690967 sysload=0.49 cputime=132.568 memavail=7294460 print_time=2599.129 buffer_time=2.301 print_stall=0 extruder: target=240 temp=239.9 pwm=0.584
Stats 791065.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2977221 bytes_read=965333 bytes_retransmit=9 bytes_invalid=0 send_seq=68397 receive_seq=68397 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=79.7 pwm=0.544 sd_pos=691023 sysload=0.49 cputime=132.609 memavail=7294460 print_time=2600.072 buffer_time=2.244 print_stall=0 extruder: target=240 temp=239.7 pwm=0.696
Stats 791066.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2978015 bytes_read=965716 bytes_retransmit=9 bytes_invalid=0 send_seq=68418 receive_seq=68418 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=79.7 pwm=0.544 sd_pos=691079 sysload=0.49 cputime=132.662 memavail=7294460 print_time=2601.028 buffer_time=2.199 print_stall=0 extruder: target=240 temp=240.1 pwm=0.466
Stats 791067.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2978829 bytes_read=966139 bytes_retransmit=9 bytes_invalid=0 send_seq=68444 receive_seq=68444 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=79.7 pwm=0.443 sd_pos=691135 sysload=0.49 cputime=132.715 memavail=7294640 print_time=2601.971 buffer_time=2.141 print_stall=0 extruder: target=240 temp=239.9 pwm=0.541
Stats 791068.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2979619 bytes_read=966571 bytes_retransmit=9 bytes_invalid=0 send_seq=68469 receive_seq=68469 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=79.7 pwm=0.485 sd_pos=691190 sysload=0.45 cputime=132.776 memavail=7294720 print_time=2602.927 buffer_time=2.096 print_stall=0 extruder: target=240 temp=240.1 pwm=0.451
Stats 791069.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2980395 bytes_read=966964 bytes_retransmit=9 bytes_invalid=0 send_seq=68492 receive_seq=68492 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=79.7 pwm=0.552 sd_pos=691246 sysload=0.45 cputime=132.835 memavail=7294720 print_time=2603.870 buffer_time=2.038 print_stall=0 extruder: target=240 temp=240.1 pwm=0.514
Stats 791070.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2981714 bytes_read=967422 bytes_retransmit=9 bytes_invalid=0 send_seq=68525 receive_seq=68525 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=79.7 pwm=0.467 sd_pos=691371 sysload=0.45 cputime=132.896 memavail=7294720 print_time=2605.769 buffer_time=2.936 print_stall=0 extruder: target=240 temp=239.9 pwm=0.618
Stats 791071.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2982486 bytes_read=967829 bytes_retransmit=9 bytes_invalid=0 send_seq=68548 receive_seq=68548 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=79.7 pwm=0.532 sd_pos=691427 sysload=0.45 cputime=132.950 memavail=7294720 print_time=2606.725 buffer_time=2.891 print_stall=0 extruder: target=240 temp=239.8 pwm=0.601
Stats 791072.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2983258 bytes_read=968217 bytes_retransmit=9 bytes_invalid=0 send_seq=68570 receive_seq=68570 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=79.8 pwm=0.472 sd_pos=691484 sysload=0.45 cputime=133.005 memavail=7294496 print_time=2607.668 buffer_time=2.834 print_stall=0 extruder: target=240 temp=239.9 pwm=0.545
Stats 791073.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2984085 bytes_read=968650 bytes_retransmit=9 bytes_invalid=0 send_seq=68595 receive_seq=68595 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=79.8 pwm=0.518 sd_pos=691552 sysload=0.42 cputime=133.060 memavail=7293992 print_time=2608.624 buffer_time=2.789 print_stall=0 extruder: target=240 temp=240.1 pwm=0.486
Stats 791074.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2984849 bytes_read=969057 bytes_retransmit=9 bytes_invalid=0 send_seq=68618 receive_seq=68618 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=79.8 pwm=0.524 sd_pos=691608 sysload=0.42 cputime=133.121 memavail=7293996 print_time=2609.567 buffer_time=2.731 print_stall=0 extruder: target=240 temp=240.0 pwm=0.548
Stats 791075.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2985612 bytes_read=969445 bytes_retransmit=9 bytes_invalid=0 send_seq=68640 receive_seq=68640 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=79.8 pwm=0.490 sd_pos=691664 sysload=0.42 cputime=133.180 memavail=7293996 print_time=2610.523 buffer_time=2.687 print_stall=0 extruder: target=240 temp=240.1 pwm=0.503
Stats 791076.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2986395 bytes_read=969858 bytes_retransmit=9 bytes_invalid=0 send_seq=68664 receive_seq=68664 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=80 temp=79.8 pwm=0.496 sd_pos=691748 sysload=0.42 cputime=133.241 memavail=7293996 print_time=2611.492 buffer_time=2.656 print_stall=0 extruder: target=240 temp=240.1 pwm=0.538
Stats 791077.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2987215 bytes_read=970270 bytes_retransmit=9 bytes_invalid=0 send_seq=68688 receive_seq=68688 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=79.8 pwm=0.612 sd_pos=691804 sysload=0.42 cputime=133.296 memavail=7293996 print_time=2612.394 buffer_time=2.557 print_stall=0 extruder: target=240 temp=240.1 pwm=0.520
Stats 791078.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2987956 bytes_read=970668 bytes_retransmit=9 bytes_invalid=0 send_seq=68709 receive_seq=68709 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=79.8 pwm=0.424 sd_pos=691861 sysload=0.38 cputime=133.361 memavail=7293996 print_time=2613.263 buffer_time=2.425 print_stall=0 extruder: target=240 temp=240.1 pwm=0.485
Stats 791079.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2988738 bytes_read=971076 bytes_retransmit=9 bytes_invalid=0 send_seq=68732 receive_seq=68732 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=79.9 pwm=0.428 sd_pos=691918 sysload=0.38 cputime=133.422 memavail=7293996 print_time=2614.080 buffer_time=2.241 print_stall=0 extruder: target=240 temp=240.0 pwm=0.530
Stats 791080.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2989491 bytes_read=971472 bytes_retransmit=9 bytes_invalid=0 send_seq=68754 receive_seq=68754 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=79.9 pwm=0.417 sd_pos=691975 sysload=0.38 cputime=133.477 memavail=7293996 print_time=2614.847 buffer_time=2.007 print_stall=0 extruder: target=240 temp=239.8 pwm=0.590
Stats 791081.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2990807 bytes_read=971888 bytes_retransmit=9 bytes_invalid=0 send_seq=68783 receive_seq=68783 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=79.9 pwm=0.502 sd_pos=692115 sysload=0.38 cputime=133.531 memavail=7293996 print_time=2616.140 buffer_time=2.300 print_stall=0 extruder: target=240 temp=240.0 pwm=0.530
Stats 791082.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=2992065 bytes_read=972333 bytes_retransmit=9 bytes_invalid=0 send_seq=68814 receive_seq=68814 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=79.9 pwm=0.381 sd_pos=692228 sysload=0.38 cputime=133.592 memavail=7293996 print_time=2617.032 buffer_time=2.191 print_stall=0 extruder: target=240 temp=240.0 pwm=0.536
Stats 791083.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2993561 bytes_read=972810 bytes_retransmit=9 bytes_invalid=0 send_seq=68848 receive_seq=68848 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=79.9 pwm=0.460 sd_pos=692396 sysload=0.35 cputime=133.656 memavail=7293684 print_time=2617.920 buffer_time=2.078 print_stall=0 extruder: target=240 temp=240.2 pwm=0.471
Stats 791084.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2995325 bytes_read=973284 bytes_retransmit=9 bytes_invalid=0 send_seq=68885 receive_seq=68885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992862 heater_bed: target=80 temp=79.9 pwm=0.474 sd_pos=692590 sysload=0.35 cputime=133.728 memavail=7293748 print_time=2619.008 buffer_time=2.166 print_stall=0 extruder: target=240 temp=240.0 pwm=0.539
Stats 791085.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2998619 bytes_read=973902 bytes_retransmit=9 bytes_invalid=0 send_seq=68950 receive_seq=68950 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=79.9 pwm=0.448 sd_pos=692934 sysload=0.35 cputime=133.787 memavail=7293748 print_time=2620.083 buffer_time=2.240 print_stall=0 extruder: target=240 temp=240.1 pwm=0.498
Stats 791086.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3002234 bytes_read=974534 bytes_retransmit=9 bytes_invalid=0 send_seq=69018 receive_seq=69018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=80 temp=79.9 pwm=0.501 sd_pos=693923 sysload=0.35 cputime=133.868 memavail=7293748 print_time=2621.640 buffer_time=2.797 print_stall=0 extruder: target=240 temp=240.1 pwm=0.492
Stats 791087.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3002766 bytes_read=974902 bytes_retransmit=9 bytes_invalid=0 send_seq=69036 receive_seq=69036 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=693980 sysload=0.35 cputime=133.923 memavail=7293748 print_time=2622.613 buffer_time=2.769 print_stall=0 extruder: target=240 temp=239.9 pwm=0.568
Stats 791088.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3003648 bytes_read=975335 bytes_retransmit=9 bytes_invalid=0 send_seq=69061 receive_seq=69061 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=80.0 pwm=0.384 sd_pos=694235 sysload=0.32 cputime=133.979 memavail=7293748 print_time=2623.652 buffer_time=2.808 print_stall=0 extruder: target=240 temp=240.4 pwm=0.367
Stats 791089.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3004379 bytes_read=975742 bytes_retransmit=9 bytes_invalid=0 send_seq=69084 receive_seq=69084 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=80.0 pwm=0.343 sd_pos=694379 sysload=0.32 cputime=134.040 memavail=7293748 print_time=2624.436 buffer_time=2.592 print_stall=0 extruder: target=240 temp=240.4 pwm=0.421
Stats 791090.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3004973 bytes_read=976120 bytes_retransmit=9 bytes_invalid=0 send_seq=69104 receive_seq=69104 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.1 pwm=0.320 sd_pos=694465 sysload=0.32 cputime=134.098 memavail=7293748 print_time=2626.052 buffer_time=3.207 print_stall=0 extruder: target=240 temp=240.1 pwm=0.574
Stats 791091.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3005199 bytes_read=976493 bytes_retransmit=9 bytes_invalid=0 send_seq=69120 receive_seq=69120 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=694465 sysload=0.32 cputime=134.150 memavail=7293748 print_time=2626.052 buffer_time=2.206 print_stall=0 extruder: target=240 temp=240.4 pwm=0.420
Stats 791092.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3005810 bytes_read=976885 bytes_retransmit=9 bytes_invalid=0 send_seq=69140 receive_seq=69140 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992875 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=694516 sysload=0.32 cputime=134.213 memavail=7293748 print_time=2627.490 buffer_time=2.643 print_stall=0 extruder: target=240 temp=240.3 pwm=0.472
Stats 791093.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3006383 bytes_read=977268 bytes_retransmit=9 bytes_invalid=0 send_seq=69158 receive_seq=69158 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=80.0 pwm=0.529 sd_pos=694516 sysload=0.30 cputime=134.271 memavail=7293244 print_time=2628.190 buffer_time=2.342 print_stall=0 extruder: target=240 temp=240.3 pwm=0.472
Stats 791094.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3006863 bytes_read=977646 bytes_retransmit=9 bytes_invalid=0 send_seq=69175 receive_seq=69175 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=80.1 pwm=0.402 sd_pos=694628 sysload=0.30 cputime=134.332 memavail=7293244 print_time=2630.071 buffer_time=3.222 print_stall=0 extruder: target=240 temp=240.1 pwm=0.568
Stats 791095.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3007090 bytes_read=978003 bytes_retransmit=9 bytes_invalid=0 send_seq=69188 receive_seq=69188 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=80.0 pwm=0.509 sd_pos=694628 sysload=0.30 cputime=134.390 memavail=7293244 print_time=2630.071 buffer_time=2.221 print_stall=0 extruder: target=240 temp=240.1 pwm=0.556
Stats 791096.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3008015 bytes_read=978401 bytes_retransmit=9 bytes_invalid=0 send_seq=69212 receive_seq=69212 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=80.0 pwm=0.446 sd_pos=695176 sysload=0.30 cputime=134.469 memavail=7293244 print_time=2631.221 buffer_time=2.371 print_stall=0 extruder: target=240 temp=240.1 pwm=0.470
Stats 791097.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3008558 bytes_read=978799 bytes_retransmit=9 bytes_invalid=0 send_seq=69233 receive_seq=69233 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=80.1 pwm=0.407 sd_pos=695231 sysload=0.30 cputime=134.537 memavail=7292664 print_time=2632.186 buffer_time=2.335 print_stall=0 extruder: target=240 temp=240.1 pwm=0.471
Stats 791098.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=3009493 bytes_read=979231 bytes_retransmit=9 bytes_invalid=0 send_seq=69258 receive_seq=69258 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992852 heater_bed: target=80 temp=80.1 pwm=0.465 sd_pos=695701 sysload=0.27 cputime=134.602 memavail=7292744 print_time=2633.230 buffer_time=2.377 print_stall=0 extruder: target=240 temp=239.8 pwm=0.643
Stats 791099.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=3011054 bytes_read=979679 bytes_retransmit=9 bytes_invalid=0 send_seq=69292 receive_seq=69292 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.1 pwm=0.407 sd_pos=695990 sysload=0.27 cputime=134.666 memavail=7292744 print_time=2634.562 buffer_time=2.708 print_stall=0 extruder: target=240 temp=240.1 pwm=0.492
Stats 791100.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=3012295 bytes_read=980117 bytes_retransmit=9 bytes_invalid=0 send_seq=69321 receive_seq=69321 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.1 pwm=0.469 sd_pos=696136 sysload=0.27 cputime=134.726 memavail=7292744 print_time=2636.206 buffer_time=3.351 print_stall=0 extruder: target=240 temp=240.2 pwm=0.438
Stats 791101.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=3012505 bytes_read=980484 bytes_retransmit=9 bytes_invalid=0 send_seq=69336 receive_seq=69336 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.1 pwm=0.380 sd_pos=696136 sysload=0.27 cputime=134.778 memavail=7292744 print_time=2636.206 buffer_time=2.351 print_stall=0 extruder: target=240 temp=240.1 pwm=0.510
Stats 791102.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=3013076 bytes_read=980847 bytes_retransmit=9 bytes_invalid=0 send_seq=69353 receive_seq=69353 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992843 heater_bed: target=80 temp=80.1 pwm=0.380 sd_pos=696234 sysload=0.27 cputime=134.832 memavail=7292744 print_time=2637.817 buffer_time=2.961 print_stall=0 extruder: target=240 temp=240.1 pwm=0.533
Stats 791103.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3013315 bytes_read=981225 bytes_retransmit=9 bytes_invalid=0 send_seq=69367 receive_seq=69367 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.1 pwm=0.380 sd_pos=696262 sysload=0.25 cputime=134.883 memavail=7292492 print_time=2638.762 buffer_time=2.906 print_stall=0 extruder: target=240 temp=240.3 pwm=0.390
Stats 791104.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3013837 bytes_read=981607 bytes_retransmit=9 bytes_invalid=0 send_seq=69385 receive_seq=69385 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=80.1 pwm=0.429 sd_pos=696262 sysload=0.25 cputime=134.931 memavail=7292492 print_time=2639.307 buffer_time=2.451 print_stall=0 extruder: target=240 temp=240.2 pwm=0.491
Stats 791105.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3014507 bytes_read=981980 bytes_retransmit=9 bytes_invalid=0 send_seq=69404 receive_seq=69404 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992879 heater_bed: target=80 temp=80.1 pwm=0.490 sd_pos=696262 sysload=0.25 cputime=134.991 memavail=7292492 print_time=2640.362 buffer_time=2.505 print_stall=0 extruder: target=240 temp=240.2 pwm=0.418
Stats 791106.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3015035 bytes_read=982387 bytes_retransmit=9 bytes_invalid=0 send_seq=69424 receive_seq=69424 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992872 heater_bed: target=80 temp=80.2 pwm=0.450 sd_pos=696376 sysload=0.25 cputime=135.050 memavail=7292492 print_time=2641.909 buffer_time=3.051 print_stall=0 extruder: target=240 temp=240.0 pwm=0.558
Stats 791107.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3015235 bytes_read=982730 bytes_retransmit=9 bytes_invalid=0 send_seq=69437 receive_seq=69437 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.2 pwm=0.316 sd_pos=696376 sysload=0.25 cputime=135.101 memavail=7292492 print_time=2641.909 buffer_time=2.050 print_stall=0 extruder: target=240 temp=239.8 pwm=0.591
Stats 791108.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=3016196 bytes_read=983138 bytes_retransmit=9 bytes_invalid=0 send_seq=69460 receive_seq=69460 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.2 pwm=0.377 sd_pos=696548 sysload=0.23 cputime=135.159 memavail=7292492 print_time=2643.100 buffer_time=2.239 print_stall=0 extruder: target=240 temp=240.0 pwm=0.508
Stats 791109.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=3017619 bytes_read=983620 bytes_retransmit=9 bytes_invalid=0 send_seq=69495 receive_seq=69495 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=80.2 pwm=0.432 sd_pos=696720 sysload=0.23 cputime=135.227 memavail=7292492 print_time=2644.859 buffer_time=2.999 print_stall=0 extruder: target=240 temp=239.8 pwm=0.592
Stats 791110.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=3019491 bytes_read=984043 bytes_retransmit=9 bytes_invalid=0 send_seq=69536 receive_seq=69524 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=1560 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.2 pwm=0.342 sd_pos=697142 sysload=0.23 cputime=135.295 memavail=7292492 print_time=2645.777 buffer_time=2.902 print_stall=0 extruder: target=240 temp=240.1 pwm=0.426
Stats 791111.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=3023044 bytes_read=984721 bytes_retransmit=9 bytes_invalid=0 send_seq=69604 receive_seq=69604 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=80.2 pwm=0.401 sd_pos=697321 sysload=0.23 cputime=135.361 memavail=7292428 print_time=2646.137 buffer_time=2.261 print_stall=0 extruder: target=240 temp=240.0 pwm=0.541
Stats 791112.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=3027161 bytes_read=985403 bytes_retransmit=9 bytes_invalid=0 send_seq=69679 receive_seq=69679 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.2 pwm=0.510 sd_pos=697802 sysload=0.23 cputime=135.427 memavail=7292524 print_time=2647.212 buffer_time=2.335 print_stall=0 extruder: target=240 temp=240.1 pwm=0.487
Stats 791113.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3031323 bytes_read=986077 bytes_retransmit=9 bytes_invalid=0 send_seq=69755 receive_seq=69755 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=236 freq=119992834 heater_bed: target=80 temp=80.2 pwm=0.421 sd_pos=698220 sysload=0.21 cputime=135.497 memavail=7292716 print_time=2648.242 buffer_time=2.365 print_stall=0 extruder: target=240 temp=240.2 pwm=0.406
Stats 791114.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3032773 bytes_read=986525 bytes_retransmit=9 bytes_invalid=0 send_seq=69786 receive_seq=69786 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992877 heater_bed: target=80 temp=80.2 pwm=0.366 sd_pos=698513 sysload=0.21 cputime=135.562 memavail=7292780 print_time=2649.051 buffer_time=2.173 print_stall=0 extruder: target=240 temp=240.2 pwm=0.471
Stats 791115.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3034200 bytes_read=986970 bytes_retransmit=9 bytes_invalid=0 send_seq=69817 receive_seq=69817 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992879 heater_bed: target=80 temp=80.3 pwm=0.366 sd_pos=698631 sysload=0.21 cputime=135.621 memavail=7292780 print_time=2650.085 buffer_time=2.206 print_stall=0 extruder: target=240 temp=240.0 pwm=0.568
Stats 791116.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3035733 bytes_read=987416 bytes_retransmit=9 bytes_invalid=0 send_seq=69852 receive_seq=69852 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992869 heater_bed: target=80 temp=80.2 pwm=0.394 sd_pos=698749 sysload=0.21 cputime=135.673 memavail=7292492 print_time=2651.119 buffer_time=2.237 print_stall=0 extruder: target=240 temp=240.4 pwm=0.380
Stats 791117.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3037230 bytes_read=987861 bytes_retransmit=9 bytes_invalid=0 send_seq=69884 receive_seq=69884 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992869 heater_bed: target=80 temp=80.2 pwm=0.394 sd_pos=698865 sysload=0.21 cputime=135.739 memavail=7292588 print_time=2652.152 buffer_time=2.270 print_stall=0 extruder: target=240 temp=240.2 pwm=0.429
Stats 791118.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3038698 bytes_read=988338 bytes_retransmit=9 bytes_invalid=0 send_seq=69918 receive_seq=69918 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992865 heater_bed: target=80 temp=80.3 pwm=0.372 sd_pos=698980 sysload=0.19 cputime=135.799 memavail=7292588 print_time=2653.186 buffer_time=2.303 print_stall=0 extruder: target=240 temp=240.3 pwm=0.380
Stats 791119.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3040140 bytes_read=988781 bytes_retransmit=9 bytes_invalid=0 send_seq=69951 receive_seq=69951 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992862 heater_bed: target=80 temp=80.2 pwm=0.439 sd_pos=699096 sysload=0.19 cputime=135.856 memavail=7292588 print_time=2654.220 buffer_time=2.337 print_stall=0 extruder: target=240 temp=240.2 pwm=0.485
Stats 791120.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3041753 bytes_read=989244 bytes_retransmit=9 bytes_invalid=0 send_seq=69985 receive_seq=69985 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=80.3 pwm=0.356 sd_pos=699213 sysload=0.19 cputime=135.914 memavail=7292588 print_time=2655.254 buffer_time=2.369 print_stall=0 extruder: target=240 temp=240.0 pwm=0.567
Stats 791121.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3043294 bytes_read=989701 bytes_retransmit=9 bytes_invalid=0 send_seq=70018 receive_seq=70018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992854 heater_bed: target=80 temp=80.3 pwm=0.356 sd_pos=699331 sysload=0.19 cputime=135.972 memavail=7292588 print_time=2656.288 buffer_time=2.403 print_stall=0 extruder: target=240 temp=239.9 pwm=0.482
Stats 791122.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3044818 bytes_read=990144 bytes_retransmit=9 bytes_invalid=0 send_seq=70051 receive_seq=70051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.3 pwm=0.356 sd_pos=699449 sysload=0.19 cputime=136.032 memavail=7292588 print_time=2657.322 buffer_time=2.436 print_stall=0 extruder: target=240 temp=240.1 pwm=0.482
Stats 791123.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3046388 bytes_read=990617 bytes_retransmit=9 bytes_invalid=0 send_seq=70084 receive_seq=70084 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992891 heater_bed: target=80 temp=80.3 pwm=0.356 sd_pos=699566 sysload=0.18 cputime=136.098 memavail=7292512 print_time=2658.356 buffer_time=2.469 print_stall=0 extruder: target=240 temp=240.2 pwm=0.354
Stats 791124.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3047940 bytes_read=991084 bytes_retransmit=9 bytes_invalid=0 send_seq=70119 receive_seq=70119 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119992883 heater_bed: target=80 temp=80.3 pwm=0.273 sd_pos=699681 sysload=0.18 cputime=136.149 memavail=7292620 print_time=2659.390 buffer_time=2.503 print_stall=0 extruder: target=240 temp=240.0 pwm=0.502
Stats 791125.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3048830 bytes_read=991477 bytes_retransmit=9 bytes_invalid=0 send_seq=70142 receive_seq=70142 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992875 heater_bed: target=80 temp=80.3 pwm=0.325 sd_pos=699738 sysload=0.18 cputime=136.195 memavail=7292620 print_time=2659.907 buffer_time=2.019 print_stall=0 extruder: target=240 temp=239.9 pwm=0.558
Stats 791126.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3050422 bytes_read=991940 bytes_retransmit=9 bytes_invalid=0 send_seq=70176 receive_seq=70176 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992868 heater_bed: target=80 temp=80.3 pwm=0.382 sd_pos=699856 sysload=0.18 cputime=136.258 memavail=7292620 print_time=2660.941 buffer_time=2.053 print_stall=0 extruder: target=240 temp=239.8 pwm=0.548
Stats 791127.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3052008 bytes_read=992407 bytes_retransmit=9 bytes_invalid=0 send_seq=70211 receive_seq=70211 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.3 pwm=0.335 sd_pos=699974 sysload=0.18 cputime=136.317 memavail=7292516 print_time=2661.975 buffer_time=2.086 print_stall=0 extruder: target=240 temp=239.8 pwm=0.548
Stats 791128.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3053540 bytes_read=992865 bytes_retransmit=9 bytes_invalid=0 send_seq=70244 receive_seq=70244 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.4 pwm=0.335 sd_pos=700104 sysload=0.16 cputime=136.374 memavail=7292564 print_time=2663.009 buffer_time=2.119 print_stall=0 extruder: target=240 temp=239.8 pwm=0.477
Stats 791129.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3055094 bytes_read=993328 bytes_retransmit=9 bytes_invalid=0 send_seq=70278 receive_seq=70278 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=80.4 pwm=0.370 sd_pos=700222 sysload=0.16 cputime=136.425 memavail=7292564 print_time=2664.044 buffer_time=2.153 print_stall=0 extruder: target=240 temp=239.9 pwm=0.528
Stats 791130.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3056657 bytes_read=993795 bytes_retransmit=9 bytes_invalid=0 send_seq=70313 receive_seq=70313 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.4 pwm=0.310 sd_pos=700340 sysload=0.16 cputime=136.486 memavail=7292564 print_time=2665.077 buffer_time=2.186 print_stall=0 extruder: target=240 temp=239.8 pwm=0.575
Stats 791131.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3058233 bytes_read=994253 bytes_retransmit=9 bytes_invalid=0 send_seq=70349 receive_seq=70349 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=80.4 pwm=0.310 sd_pos=700469 sysload=0.16 cputime=136.540 memavail=7292564 print_time=2666.120 buffer_time=2.228 print_stall=0 extruder: target=240 temp=240.1 pwm=0.463
Stats 791132.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3059896 bytes_read=994726 bytes_retransmit=9 bytes_invalid=0 send_seq=70385 receive_seq=70385 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992878 heater_bed: target=80 temp=80.4 pwm=0.411 sd_pos=700586 sysload=0.16 cputime=136.604 memavail=7292564 print_time=2667.178 buffer_time=2.286 print_stall=0 extruder: target=240 temp=239.9 pwm=0.541
Stats 791133.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3061656 bytes_read=995233 bytes_retransmit=9 bytes_invalid=0 send_seq=70425 receive_seq=70425 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=80.4 pwm=0.318 sd_pos=700701 sysload=0.15 cputime=136.662 memavail=7292564 print_time=2668.256 buffer_time=2.362 print_stall=0 extruder: target=240 temp=239.8 pwm=0.565
Stats 791134.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3063262 bytes_read=995686 bytes_retransmit=9 bytes_invalid=0 send_seq=70460 receive_seq=70460 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119992861 heater_bed: target=80 temp=80.4 pwm=0.324 sd_pos=700817 sysload=0.15 cputime=136.715 memavail=7292596 print_time=2669.361 buffer_time=2.466 print_stall=0 extruder: target=240 temp=239.8 pwm=0.565
Stats 791135.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3064134 bytes_read=996089 bytes_retransmit=9 bytes_invalid=0 send_seq=70482 receive_seq=70482 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=80.4 pwm=0.324 sd_pos=700876 sysload=0.15 cputime=136.775 memavail=7292596 print_time=2669.930 buffer_time=2.034 print_stall=0 extruder: target=240 temp=239.8 pwm=0.565
Stats 791136.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3065697 bytes_read=996561 bytes_retransmit=9 bytes_invalid=0 send_seq=70518 receive_seq=70518 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=80.4 pwm=0.391 sd_pos=700992 sysload=0.15 cputime=136.849 memavail=7292596 print_time=2671.090 buffer_time=2.194 print_stall=0 extruder: target=240 temp=240.1 pwm=0.481
Stats 791137.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3067200 bytes_read=996999 bytes_retransmit=9 bytes_invalid=0 send_seq=70550 receive_seq=70550 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=80.4 pwm=0.351 sd_pos=701080 sysload=0.15 cputime=136.918 memavail=7292596 print_time=2672.037 buffer_time=2.140 print_stall=0 extruder: target=240 temp=240.0 pwm=0.481
Stats 791138.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3068206 bytes_read=997432 bytes_retransmit=9 bytes_invalid=0 send_seq=70575 receive_seq=70575 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.4 pwm=0.287 sd_pos=701165 sysload=0.14 cputime=136.989 memavail=7292372 print_time=2672.908 buffer_time=2.009 print_stall=0 extruder: target=240 temp=240.1 pwm=0.479
Stats 791139.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3069841 bytes_read=997904 bytes_retransmit=9 bytes_invalid=0 send_seq=70611 receive_seq=70611 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.4 pwm=0.341 sd_pos=701281 sysload=0.14 cputime=137.059 memavail=7292372 print_time=2674.178 buffer_time=2.279 print_stall=0 extruder: target=240 temp=240.0 pwm=0.537
Stats 791140.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3071317 bytes_read=998347 bytes_retransmit=9 bytes_invalid=0 send_seq=70644 receive_seq=70644 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=80.4 pwm=0.435 sd_pos=701396 sysload=0.14 cputime=137.125 memavail=7292372 print_time=2675.488 buffer_time=2.588 print_stall=0 extruder: target=240 temp=239.9 pwm=0.537
Stats 791141.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3072232 bytes_read=998760 bytes_retransmit=9 bytes_invalid=0 send_seq=70668 receive_seq=70668 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=80.4 pwm=0.303 sd_pos=701455 sysload=0.14 cputime=137.189 memavail=7292372 print_time=2676.163 buffer_time=2.261 print_stall=0 extruder: target=240 temp=240.1 pwm=0.451
Stats 791142.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3073849 bytes_read=999247 bytes_retransmit=9 bytes_invalid=0 send_seq=70707 receive_seq=70707 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=80.4 pwm=0.379 sd_pos=701572 sysload=0.14 cputime=137.263 memavail=7292372 print_time=2677.520 buffer_time=2.617 print_stall=0 extruder: target=240 temp=240.1 pwm=0.453
Stats 791143.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3074835 bytes_read=999670 bytes_retransmit=9 bytes_invalid=0 send_seq=70733 receive_seq=70733 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=80.4 pwm=0.299 sd_pos=701629 sysload=0.29 cputime=137.316 memavail=7292884 print_time=2678.201 buffer_time=2.298 print_stall=0 extruder: target=240 temp=240.1 pwm=0.415
Stats 791144.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3075668 bytes_read=1000089 bytes_retransmit=9 bytes_invalid=0 send_seq=70756 receive_seq=70756 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992841 heater_bed: target=80 temp=80.4 pwm=0.352 sd_pos=701687 sysload=0.29 cputime=137.367 memavail=7292884 print_time=2678.902 buffer_time=1.998 print_stall=0 extruder: target=240 temp=239.9 pwm=0.564
Stats 791145.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3077280 bytes_read=1000566 bytes_retransmit=9 bytes_invalid=0 send_seq=70793 receive_seq=70793 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=80.4 pwm=0.322 sd_pos=701800 sysload=0.29 cputime=137.435 memavail=7292884 print_time=2680.304 buffer_time=2.398 print_stall=0 extruder: target=240 temp=240.1 pwm=0.426
Stats 791146.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3078200 bytes_read=1000969 bytes_retransmit=9 bytes_invalid=0 send_seq=70818 receive_seq=70818 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=80.3 pwm=0.390 sd_pos=701854 sysload=0.29 cputime=137.496 memavail=7292884 print_time=2681.002 buffer_time=2.095 print_stall=0 extruder: target=240 temp=240.0 pwm=0.509
Stats 791147.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3079817 bytes_read=1001442 bytes_retransmit=9 bytes_invalid=0 send_seq=70854 receive_seq=70854 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=80.3 pwm=0.381 sd_pos=701968 sysload=0.29 cputime=137.560 memavail=7292884 print_time=2682.417 buffer_time=2.509 print_stall=0 extruder: target=240 temp=240.0 pwm=0.513
Stats 791148.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3080687 bytes_read=1001864 bytes_retransmit=9 bytes_invalid=0 send_seq=70877 receive_seq=70877 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992818 heater_bed: target=80 temp=80.3 pwm=0.381 sd_pos=702025 sysload=0.27 cputime=137.613 memavail=7292884 print_time=2683.132 buffer_time=2.225 print_stall=0 extruder: target=240 temp=240.0 pwm=0.488
Stats 791149.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3082255 bytes_read=1002327 bytes_retransmit=9 bytes_invalid=0 send_seq=70914 receive_seq=70914 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.3 pwm=0.381 sd_pos=702139 sysload=0.27 cputime=137.670 memavail=7292884 print_time=2684.550 buffer_time=2.641 print_stall=0 extruder: target=240 temp=240.0 pwm=0.460
Stats 791150.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3083153 bytes_read=1002735 bytes_retransmit=9 bytes_invalid=0 send_seq=70937 receive_seq=70937 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.3 pwm=0.381 sd_pos=702196 sysload=0.27 cputime=137.723 memavail=7292884 print_time=2685.252 buffer_time=2.342 print_stall=0 extruder: target=240 temp=240.0 pwm=0.511
Stats 791151.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3084027 bytes_read=1003154 bytes_retransmit=9 bytes_invalid=0 send_seq=70963 receive_seq=70963 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.3 pwm=0.393 sd_pos=702254 sysload=0.27 cputime=137.785 memavail=7292884 print_time=2685.967 buffer_time=2.057 print_stall=0 extruder: target=240 temp=240.0 pwm=0.470
Stats 791152.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3085590 bytes_read=1003595 bytes_retransmit=9 bytes_invalid=0 send_seq=70997 receive_seq=70997 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=80.3 pwm=0.393 sd_pos=702368 sysload=0.27 cputime=137.847 memavail=7292884 print_time=2687.384 buffer_time=2.473 print_stall=0 extruder: target=240 temp=239.9 pwm=0.541
Stats 791153.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3086511 bytes_read=1004026 bytes_retransmit=9 bytes_invalid=0 send_seq=71023 receive_seq=71023 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992835 heater_bed: target=80 temp=80.2 pwm=0.412 sd_pos=702425 sysload=0.24 cputime=137.909 memavail=7292660 print_time=2688.086 buffer_time=2.174 print_stall=0 extruder: target=240 temp=240.2 pwm=0.400
Stats 791154.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3088049 bytes_read=1004493 bytes_retransmit=9 bytes_invalid=0 send_seq=71058 receive_seq=71058 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=80.2 pwm=0.346 sd_pos=702540 sysload=0.24 cputime=137.972 memavail=7292660 print_time=2689.504 buffer_time=2.590 print_stall=0 extruder: target=240 temp=240.1 pwm=0.502
Stats 791155.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3088949 bytes_read=1004886 bytes_retransmit=9 bytes_invalid=0 send_seq=71081 receive_seq=71081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.2 pwm=0.464 sd_pos=702597 sysload=0.24 cputime=138.029 memavail=7292660 print_time=2690.219 buffer_time=2.305 print_stall=0 extruder: target=240 temp=239.9 pwm=0.578
Stats 791156.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3089810 bytes_read=1005294 bytes_retransmit=9 bytes_invalid=0 send_seq=71104 receive_seq=71104 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=80.2 pwm=0.402 sd_pos=702664 sysload=0.24 cputime=138.093 memavail=7292660 print_time=2690.921 buffer_time=2.006 print_stall=0 extruder: target=240 temp=239.8 pwm=0.578
Stats 791157.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3091349 bytes_read=1005756 bytes_retransmit=9 bytes_invalid=0 send_seq=71138 receive_seq=71138 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992818 heater_bed: target=80 temp=80.2 pwm=0.402 sd_pos=702777 sysload=0.24 cputime=138.167 memavail=7292556 print_time=2692.338 buffer_time=2.423 print_stall=0 extruder: target=240 temp=240.0 pwm=0.479
Stats 791158.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3092305 bytes_read=1006164 bytes_retransmit=9 bytes_invalid=0 send_seq=71161 receive_seq=71161 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=80.1 pwm=0.435 sd_pos=702834 sysload=0.22 cputime=138.216 memavail=7292628 print_time=2693.054 buffer_time=2.137 print_stall=0 extruder: target=240 temp=240.0 pwm=0.479
Stats 791159.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3093969 bytes_read=1006642 bytes_retransmit=9 bytes_invalid=0 send_seq=71198 receive_seq=71198 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.1 pwm=0.385 sd_pos=702958 sysload=0.22 cputime=138.277 memavail=7292628 print_time=2694.471 buffer_time=2.554 print_stall=0 extruder: target=240 temp=240.1 pwm=0.459
Stats 791160.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3094865 bytes_read=1007059 bytes_retransmit=9 bytes_invalid=0 send_seq=71223 receive_seq=71223 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=80 temp=80.1 pwm=0.385 sd_pos=703014 sysload=0.22 cputime=138.331 memavail=7292628 print_time=2695.173 buffer_time=2.255 print_stall=0 extruder: target=240 temp=240.1 pwm=0.498
Stats 791161.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3096396 bytes_read=1007507 bytes_retransmit=9 bytes_invalid=0 send_seq=71257 receive_seq=71257 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=80.1 pwm=0.381 sd_pos=703127 sysload=0.22 cputime=138.390 memavail=7292632 print_time=2696.590 buffer_time=2.672 print_stall=0 extruder: target=240 temp=240.1 pwm=0.498
Stats 791162.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3097298 bytes_read=1007915 bytes_retransmit=9 bytes_invalid=0 send_seq=71280 receive_seq=71280 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992858 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=703184 sysload=0.22 cputime=138.443 memavail=7292632 print_time=2697.306 buffer_time=2.386 print_stall=0 extruder: target=240 temp=240.1 pwm=0.498
Stats 791163.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3098206 bytes_read=1008342 bytes_retransmit=9 bytes_invalid=0 send_seq=71304 receive_seq=71304 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=703240 sysload=0.21 cputime=138.493 memavail=7292632 print_time=2698.008 buffer_time=2.088 print_stall=0 extruder: target=240 temp=240.0 pwm=0.464
Stats 791164.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3099768 bytes_read=1008795 bytes_retransmit=9 bytes_invalid=0 send_seq=71339 receive_seq=71339 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=703353 sysload=0.21 cputime=138.540 memavail=7292632 print_time=2699.425 buffer_time=2.505 print_stall=0 extruder: target=240 temp=240.1 pwm=0.464
Stats 791165.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3100727 bytes_read=1009218 bytes_retransmit=9 bytes_invalid=0 send_seq=71365 receive_seq=71365 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=703410 sysload=0.21 cputime=138.590 memavail=7292632 print_time=2700.140 buffer_time=2.220 print_stall=0 extruder: target=240 temp=239.8 pwm=0.574
Stats 791166.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3102375 bytes_read=1009705 bytes_retransmit=9 bytes_invalid=0 send_seq=71404 receive_seq=71404 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992835 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=703523 sysload=0.21 cputime=138.651 memavail=7292632 print_time=2701.558 buffer_time=2.636 print_stall=0 extruder: target=240 temp=240.0 pwm=0.509
Stats 791167.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3103279 bytes_read=1010108 bytes_retransmit=9 bytes_invalid=0 send_seq=71429 receive_seq=71429 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=703578 sysload=0.21 cputime=138.704 memavail=7292632 print_time=2702.260 buffer_time=2.337 print_stall=0 extruder: target=240 temp=240.0 pwm=0.502
Stats 791168.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3104226 bytes_read=1010556 bytes_retransmit=9 bytes_invalid=0 send_seq=71457 receive_seq=71457 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=703634 sysload=0.19 cputime=138.756 memavail=7292632 print_time=2702.975 buffer_time=2.052 print_stall=0 extruder: target=240 temp=240.1 pwm=0.478
Stats 791169.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3105838 bytes_read=1011033 bytes_retransmit=9 bytes_invalid=0 send_seq=71494 receive_seq=71494 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992825 heater_bed: target=80 temp=79.9 pwm=0.492 sd_pos=703745 sysload=0.19 cputime=138.818 memavail=7292632 print_time=2704.392 buffer_time=2.470 print_stall=0 extruder: target=240 temp=240.1 pwm=0.495
Stats 791170.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3106676 bytes_read=1011421 bytes_retransmit=9 bytes_invalid=0 send_seq=71516 receive_seq=71516 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=79.9 pwm=0.492 sd_pos=703800 sysload=0.19 cputime=138.871 memavail=7292632 print_time=2705.094 buffer_time=2.171 print_stall=0 extruder: target=240 temp=240.1 pwm=0.495
Stats 791171.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3108288 bytes_read=1011894 bytes_retransmit=9 bytes_invalid=0 send_seq=71552 receive_seq=71552 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=80 temp=79.9 pwm=0.462 sd_pos=703908 sysload=0.19 cputime=138.928 memavail=7292632 print_time=2706.512 buffer_time=2.587 print_stall=0 extruder: target=240 temp=240.1 pwm=0.495
Stats 791172.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3109146 bytes_read=1012301 bytes_retransmit=9 bytes_invalid=0 send_seq=71575 receive_seq=71575 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=79.9 pwm=0.462 sd_pos=703961 sysload=0.19 cputime=138.980 memavail=7292632 print_time=2707.227 buffer_time=2.302 print_stall=0 extruder: target=240 temp=239.8 pwm=0.574
Stats 791173.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3110001 bytes_read=1012714 bytes_retransmit=9 bytes_invalid=0 send_seq=71599 receive_seq=71599 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992835 heater_bed: target=80 temp=79.9 pwm=0.462 sd_pos=704028 sysload=0.17 cputime=139.028 memavail=7292632 print_time=2707.929 buffer_time=2.003 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 791174.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3111596 bytes_read=1013187 bytes_retransmit=9 bytes_invalid=0 send_seq=71635 receive_seq=71635 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=79.9 pwm=0.396 sd_pos=704136 sysload=0.17 cputime=139.087 memavail=7292636 print_time=2709.346 buffer_time=2.420 print_stall=0 extruder: target=240 temp=240.0 pwm=0.502
Stats 791175.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3112483 bytes_read=1013604 bytes_retransmit=9 bytes_invalid=0 send_seq=71660 receive_seq=71660 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992824 heater_bed: target=80 temp=79.9 pwm=0.498 sd_pos=704203 sysload=0.17 cputime=139.152 memavail=7292636 print_time=2710.062 buffer_time=2.135 print_stall=0 extruder: target=240 temp=240.0 pwm=0.545
Stats 791176.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3114016 bytes_read=1014052 bytes_retransmit=9 bytes_invalid=0 send_seq=71694 receive_seq=71694 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=79.9 pwm=0.498 sd_pos=704314 sysload=0.17 cputime=139.208 memavail=7292412 print_time=2711.479 buffer_time=2.551 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 791177.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3114952 bytes_read=1014470 bytes_retransmit=9 bytes_invalid=0 send_seq=71719 receive_seq=71719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=79.9 pwm=0.441 sd_pos=704369 sysload=0.17 cputime=139.263 memavail=7292412 print_time=2712.181 buffer_time=2.252 print_stall=0 extruder: target=240 temp=239.7 pwm=0.665
Stats 791178.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3116483 bytes_read=1014952 bytes_retransmit=9 bytes_invalid=0 send_seq=71754 receive_seq=71754 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=79.9 pwm=0.441 sd_pos=704480 sysload=0.16 cputime=139.313 memavail=7292412 print_time=2713.598 buffer_time=2.669 print_stall=0 extruder: target=240 temp=240.1 pwm=0.414
Stats 791179.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3117361 bytes_read=1015345 bytes_retransmit=9 bytes_invalid=0 send_seq=71777 receive_seq=71777 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=80 temp=79.9 pwm=0.441 sd_pos=704535 sysload=0.16 cputime=139.368 memavail=7292188 print_time=2714.314 buffer_time=2.383 print_stall=0 extruder: target=240 temp=240.0 pwm=0.533
Stats 791180.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3118253 bytes_read=1015758 bytes_retransmit=9 bytes_invalid=0 send_seq=71801 receive_seq=71801 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992864 heater_bed: target=80 temp=79.9 pwm=0.415 sd_pos=704590 sysload=0.16 cputime=139.424 memavail=7292188 print_time=2715.016 buffer_time=2.084 print_stall=0 extruder: target=240 temp=240.0 pwm=0.533
Stats 791181.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3119856 bytes_read=1016225 bytes_retransmit=9 bytes_invalid=0 send_seq=71836 receive_seq=71836 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=79.9 pwm=0.465 sd_pos=704701 sysload=0.16 cputime=139.480 memavail=7292188 print_time=2716.433 buffer_time=2.501 print_stall=0 extruder: target=240 temp=240.1 pwm=0.458
Stats 791182.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3120708 bytes_read=1016618 bytes_retransmit=9 bytes_invalid=0 send_seq=71859 receive_seq=71859 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992860 heater_bed: target=80 temp=79.8 pwm=0.465 sd_pos=704757 sysload=0.16 cputime=139.528 memavail=7288916 print_time=2717.148 buffer_time=2.216 print_stall=0 extruder: target=240 temp=239.9 pwm=0.510
Stats 791183.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3122224 bytes_read=1017096 bytes_retransmit=9 bytes_invalid=0 send_seq=71893 receive_seq=71893 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992850 heater_bed: target=80 temp=79.8 pwm=0.465 sd_pos=704867 sysload=0.15 cputime=139.597 memavail=7292172 print_time=2718.566 buffer_time=2.632 print_stall=0 extruder: target=240 temp=239.9 pwm=0.560
Stats 791184.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3123179 bytes_read=1017508 bytes_retransmit=9 bytes_invalid=0 send_seq=71917 receive_seq=71917 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=79.8 pwm=0.465 sd_pos=704934 sysload=0.15 cputime=139.647 memavail=7292172 print_time=2719.267 buffer_time=2.333 print_stall=0 extruder: target=240 temp=239.9 pwm=0.552
Stats 791185.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3124053 bytes_read=1017911 bytes_retransmit=9 bytes_invalid=0 send_seq=71942 receive_seq=71942 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=79.8 pwm=0.424 sd_pos=704990 sysload=0.15 cputime=139.725 memavail=7292172 print_time=2719.983 buffer_time=2.047 print_stall=0 extruder: target=240 temp=240.1 pwm=0.489
Stats 791186.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3125669 bytes_read=1018384 bytes_retransmit=9 bytes_invalid=0 send_seq=71978 receive_seq=71978 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=80 temp=79.8 pwm=0.498 sd_pos=705100 sysload=0.15 cputime=139.790 memavail=7292172 print_time=2721.400 buffer_time=2.463 print_stall=0 extruder: target=240 temp=240.1 pwm=0.478
Stats 791187.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3126558 bytes_read=1018791 bytes_retransmit=9 bytes_invalid=0 send_seq=72002 receive_seq=72002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992816 heater_bed: target=80 temp=79.8 pwm=0.546 sd_pos=705167 sysload=0.15 cputime=139.863 memavail=7292200 print_time=2722.102 buffer_time=2.165 print_stall=0 extruder: target=240 temp=239.9 pwm=0.580
Stats 791188.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3128153 bytes_read=1019252 bytes_retransmit=9 bytes_invalid=0 send_seq=72037 receive_seq=72037 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992808 heater_bed: target=80 temp=79.8 pwm=0.538 sd_pos=705278 sysload=0.13 cputime=139.932 memavail=7292200 print_time=2723.519 buffer_time=2.581 print_stall=0 extruder: target=240 temp=240.0 pwm=0.503
Stats 791189.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3129103 bytes_read=1019675 bytes_retransmit=9 bytes_invalid=0 send_seq=72064 receive_seq=72064 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=79.8 pwm=0.441 sd_pos=705333 sysload=0.13 cputime=139.990 memavail=7292200 print_time=2724.235 buffer_time=2.295 print_stall=0 extruder: target=240 temp=240.1 pwm=0.452
Stats 791190.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3130668 bytes_read=1020142 bytes_retransmit=9 bytes_invalid=0 send_seq=72099 receive_seq=72099 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=79.8 pwm=0.441 sd_pos=705444 sysload=0.13 cputime=140.059 memavail=7292200 print_time=2725.652 buffer_time=2.705 print_stall=0 extruder: target=240 temp=240.2 pwm=0.379
Stats 791191.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3131536 bytes_read=1020535 bytes_retransmit=9 bytes_invalid=0 send_seq=72122 receive_seq=72122 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=79.8 pwm=0.441 sd_pos=705499 sysload=0.13 cputime=140.122 memavail=7292200 print_time=2726.354 buffer_time=2.407 print_stall=0 extruder: target=240 temp=240.2 pwm=0.439
Stats 791192.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3133012 bytes_read=1020998 bytes_retransmit=9 bytes_invalid=0 send_seq=72156 receive_seq=72156 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=79.8 pwm=0.446 sd_pos=705803 sysload=0.13 cputime=140.184 memavail=7292200 print_time=2727.202 buffer_time=2.253 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 791193.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3136252 bytes_read=1021615 bytes_retransmit=9 bytes_invalid=0 send_seq=72218 receive_seq=72218 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=79.8 pwm=0.446 sd_pos=706044 sysload=0.12 cputime=140.252 memavail=7291984 print_time=2728.401 buffer_time=2.451 print_stall=0 extruder: target=240 temp=239.6 pwm=0.664
Stats 791194.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3138222 bytes_read=1022098 bytes_retransmit=9 bytes_invalid=0 send_seq=72259 receive_seq=72259 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=79.8 pwm=0.446 sd_pos=706202 sysload=0.12 cputime=140.317 memavail=7291984 print_time=2729.254 buffer_time=2.303 print_stall=0 extruder: target=240 temp=239.9 pwm=0.512
Stats 791195.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3140179 bytes_read=1022596 bytes_retransmit=9 bytes_invalid=0 send_seq=72300 receive_seq=72300 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=79.8 pwm=0.366 sd_pos=706360 sysload=0.12 cputime=140.380 memavail=7291984 print_time=2730.094 buffer_time=2.142 print_stall=0 extruder: target=240 temp=239.8 pwm=0.512
Stats 791196.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3142760 bytes_read=1023108 bytes_retransmit=9 bytes_invalid=0 send_seq=72354 receive_seq=72344 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=79.8 pwm=0.418 sd_pos=706598 sysload=0.12 cputime=140.452 memavail=7291984 print_time=2731.269 buffer_time=2.317 print_stall=0 extruder: target=240 temp=240.0 pwm=0.497
Stats 791197.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3145290 bytes_read=1023686 bytes_retransmit=9 bytes_invalid=0 send_seq=72404 receive_seq=72404 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=79.9 pwm=0.329 sd_pos=706782 sysload=0.12 cputime=140.522 memavail=7291984 print_time=2732.326 buffer_time=2.373 print_stall=0 extruder: target=240 temp=240.1 pwm=0.425
Stats 791198.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3149128 bytes_read=1024360 bytes_retransmit=9 bytes_invalid=0 send_seq=72477 receive_seq=72477 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=79.9 pwm=0.440 sd_pos=707457 sysload=0.11 cputime=140.596 memavail=7291984 print_time=2733.219 buffer_time=2.267 print_stall=0 extruder: target=240 temp=240.1 pwm=0.514
Stats 791199.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3151778 bytes_read=1024917 bytes_retransmit=9 bytes_invalid=0 send_seq=72530 receive_seq=72530 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=79.9 pwm=0.384 sd_pos=707841 sysload=0.11 cputime=140.664 memavail=7291984 print_time=2733.991 buffer_time=2.038 print_stall=0 extruder: target=240 temp=240.1 pwm=0.544
Stats 791200.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3153775 bytes_read=1025405 bytes_retransmit=9 bytes_invalid=0 send_seq=72572 receive_seq=72572 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992806 heater_bed: target=80 temp=79.9 pwm=0.396 sd_pos=708007 sysload=0.11 cputime=140.735 memavail=7291984 print_time=2735.214 buffer_time=2.261 print_stall=0 extruder: target=240 temp=240.0 pwm=0.568
Stats 791201.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3156358 bytes_read=1025953 bytes_retransmit=9 bytes_invalid=0 send_seq=72623 receive_seq=72623 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=79.9 pwm=0.402 sd_pos=708222 sysload=0.11 cputime=140.806 memavail=7291984 print_time=2736.451 buffer_time=2.497 print_stall=0 extruder: target=240 temp=240.2 pwm=0.490
Stats 791202.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3158370 bytes_read=1026450 bytes_retransmit=9 bytes_invalid=0 send_seq=72664 receive_seq=72664 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=79.9 pwm=0.388 sd_pos=708381 sysload=0.11 cputime=140.866 memavail=7291984 print_time=2737.301 buffer_time=2.347 print_stall=0 extruder: target=240 temp=240.1 pwm=0.490
Stats 791203.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3160421 bytes_read=1026949 bytes_retransmit=9 bytes_invalid=0 send_seq=72705 receive_seq=72705 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=79.9 pwm=0.439 sd_pos=708541 sysload=0.10 cputime=140.927 memavail=7292740 print_time=2738.165 buffer_time=2.210 print_stall=0 extruder: target=240 temp=240.2 pwm=0.490
Stats 791204.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3162457 bytes_read=1027457 bytes_retransmit=9 bytes_invalid=0 send_seq=72748 receive_seq=72748 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=708705 sysload=0.10 cputime=140.989 memavail=7292740 print_time=2739.016 buffer_time=2.060 print_stall=0 extruder: target=240 temp=240.3 pwm=0.429
Stats 791205.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3165166 bytes_read=1028014 bytes_retransmit=9 bytes_invalid=0 send_seq=72802 receive_seq=72801 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=708949 sysload=0.10 cputime=141.055 memavail=7292740 print_time=2740.206 buffer_time=2.249 print_stall=0 extruder: target=240 temp=240.3 pwm=0.447
Stats 791206.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3167242 bytes_read=1028523 bytes_retransmit=9 bytes_invalid=0 send_seq=72845 receive_seq=72845 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=709109 sysload=0.10 cputime=141.131 memavail=7292740 print_time=2741.071 buffer_time=2.113 print_stall=0 extruder: target=240 temp=239.9 pwm=0.619
Stats 791207.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3170356 bytes_read=1029125 bytes_retransmit=9 bytes_invalid=0 send_seq=72904 receive_seq=72904 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=11 freq=119992904 heater_bed: target=80 temp=79.9 pwm=0.394 sd_pos=709350 sysload=0.10 cputime=141.198 memavail=7292740 print_time=2742.455 buffer_time=2.497 print_stall=0 extruder: target=240 temp=239.9 pwm=0.538
Stats 791208.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3174353 bytes_read=1029804 bytes_retransmit=9 bytes_invalid=0 send_seq=72981 receive_seq=72981 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=80.0 pwm=0.321 sd_pos=709810 sysload=0.10 cputime=141.265 memavail=7292740 print_time=2743.525 buffer_time=2.567 print_stall=0 extruder: target=240 temp=239.9 pwm=0.543
Stats 791209.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3176449 bytes_read=1030302 bytes_retransmit=9 bytes_invalid=0 send_seq=73025 receive_seq=73025 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992883 heater_bed: target=80 temp=80.0 pwm=0.392 sd_pos=710162 sysload=0.10 cputime=141.327 memavail=7292516 print_time=2744.096 buffer_time=2.138 print_stall=0 extruder: target=240 temp=240.1 pwm=0.422
Stats 791210.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3180411 bytes_read=1030984 bytes_retransmit=9 bytes_invalid=0 send_seq=73100 receive_seq=73100 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992873 heater_bed: target=80 temp=80.0 pwm=0.353 sd_pos=711046 sysload=0.10 cputime=141.400 memavail=7292516 print_time=2745.148 buffer_time=2.189 print_stall=0 extruder: target=240 temp=240.2 pwm=0.425
Stats 791211.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3183094 bytes_read=1031527 bytes_retransmit=9 bytes_invalid=0 send_seq=73153 receive_seq=73153 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.302 sd_pos=711905 sysload=0.10 cputime=141.473 memavail=7292516 print_time=2746.295 buffer_time=2.335 print_stall=0 extruder: target=240 temp=240.2 pwm=0.442
Stats 791212.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3183846 bytes_read=1031915 bytes_retransmit=9 bytes_invalid=0 send_seq=73175 receive_seq=73175 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=80 temp=80.0 pwm=0.366 sd_pos=711962 sysload=0.10 cputime=141.524 memavail=7292516 print_time=2747.274 buffer_time=2.313 print_stall=0 extruder: target=240 temp=240.0 pwm=0.560
Stats 791213.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3184750 bytes_read=1032368 bytes_retransmit=9 bytes_invalid=0 send_seq=73201 receive_seq=73201 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992846 heater_bed: target=80 temp=80.0 pwm=0.350 sd_pos=712227 sysload=0.09 cputime=141.575 memavail=7292768 print_time=2748.307 buffer_time=2.346 print_stall=0 extruder: target=240 temp=240.1 pwm=0.454
Stats 791214.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3185369 bytes_read=1032746 bytes_retransmit=9 bytes_invalid=0 send_seq=73221 receive_seq=73221 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=80 temp=80.1 pwm=0.350 sd_pos=712371 sysload=0.09 cputime=141.624 memavail=7292768 print_time=2749.096 buffer_time=2.134 print_stall=0 extruder: target=240 temp=239.9 pwm=0.519
Stats 791215.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3185942 bytes_read=1033114 bytes_retransmit=9 bytes_invalid=0 send_seq=73239 receive_seq=73239 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=712469 sysload=0.09 cputime=141.682 memavail=7292768 print_time=2750.712 buffer_time=2.749 print_stall=0 extruder: target=240 temp=240.2 pwm=0.398
Stats 791216.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3186506 bytes_read=1033506 bytes_retransmit=9 bytes_invalid=0 send_seq=73256 receive_seq=73256 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992872 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=712520 sysload=0.09 cputime=141.736 memavail=7292768 print_time=2752.149 buffer_time=3.187 print_stall=0 extruder: target=240 temp=240.3 pwm=0.398
Stats 791217.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3186748 bytes_read=1033869 bytes_retransmit=9 bytes_invalid=0 send_seq=73273 receive_seq=73273 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992860 heater_bed: target=80 temp=80.1 pwm=0.344 sd_pos=712520 sysload=0.09 cputime=141.784 memavail=7292768 print_time=2752.149 buffer_time=2.186 print_stall=0 extruder: target=240 temp=240.4 pwm=0.389
Stats 791218.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3187421 bytes_read=1034262 bytes_retransmit=9 bytes_invalid=0 send_seq=73293 receive_seq=73293 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992852 heater_bed: target=80 temp=80.1 pwm=0.339 sd_pos=712520 sysload=0.24 cputime=141.838 memavail=7292768 print_time=2753.444 buffer_time=2.480 print_stall=0 extruder: target=240 temp=240.2 pwm=0.487
Stats 791219.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3187880 bytes_read=1034659 bytes_retransmit=9 bytes_invalid=0 send_seq=73311 receive_seq=73311 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.1 pwm=0.311 sd_pos=712632 sysload=0.24 cputime=141.894 memavail=7296116 print_time=2754.730 buffer_time=2.766 print_stall=0 extruder: target=240 temp=239.8 pwm=0.619
Stats 791220.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3188425 bytes_read=1035037 bytes_retransmit=9 bytes_invalid=0 send_seq=73331 receive_seq=73331 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992839 heater_bed: target=80 temp=80.1 pwm=0.407 sd_pos=712777 sysload=0.24 cputime=141.952 memavail=7296116 print_time=2755.042 buffer_time=2.077 print_stall=0 extruder: target=240 temp=239.5 pwm=0.682
Stats 791221.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3189304 bytes_read=1035430 bytes_retransmit=9 bytes_invalid=0 send_seq=73354 receive_seq=73354 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.1 pwm=0.309 sd_pos=713237 sysload=0.24 cputime=142.014 memavail=7296116 print_time=2756.846 buffer_time=2.880 print_stall=0 extruder: target=240 temp=239.9 pwm=0.447
Stats 791222.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3190402 bytes_read=1035882 bytes_retransmit=9 bytes_invalid=0 send_seq=73383 receive_seq=73383 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.1 pwm=0.392 sd_pos=713752 sysload=0.24 cputime=142.072 memavail=7296116 print_time=2757.925 buffer_time=2.960 print_stall=0 extruder: target=240 temp=240.0 pwm=0.459
Stats 791223.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3191343 bytes_read=1036298 bytes_retransmit=9 bytes_invalid=0 send_seq=73409 receive_seq=73409 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=10 freq=119992825 heater_bed: target=80 temp=80.1 pwm=0.341 sd_pos=714033 sysload=0.22 cputime=142.125 memavail=7295108 print_time=2758.471 buffer_time=2.504 print_stall=0 extruder: target=240 temp=240.1 pwm=0.472
Stats 791224.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3192062 bytes_read=1036664 bytes_retransmit=9 bytes_invalid=0 send_seq=73428 receive_seq=73428 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992858 heater_bed: target=80 temp=80.1 pwm=0.416 sd_pos=714090 sysload=0.22 cputime=142.175 memavail=7294884 print_time=2759.233 buffer_time=2.265 print_stall=0 extruder: target=240 temp=240.2 pwm=0.408
Stats 791225.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3193327 bytes_read=1037128 bytes_retransmit=9 bytes_invalid=0 send_seq=73460 receive_seq=73460 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=10 freq=119992847 heater_bed: target=80 temp=80.2 pwm=0.266 sd_pos=714236 sysload=0.22 cputime=142.226 memavail=7294884 print_time=2760.877 buffer_time=2.909 print_stall=0 extruder: target=240 temp=240.0 pwm=0.526
Stats 791226.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3193720 bytes_read=1037486 bytes_retransmit=9 bytes_invalid=0 send_seq=73476 receive_seq=73476 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992839 heater_bed: target=80 temp=80.1 pwm=0.462 sd_pos=714294 sysload=0.22 cputime=142.275 memavail=7294884 print_time=2761.002 buffer_time=2.032 print_stall=0 extruder: target=240 temp=240.2 pwm=0.421
Stats 791227.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3194123 bytes_read=1037839 bytes_retransmit=9 bytes_invalid=0 send_seq=73491 receive_seq=73491 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=80.1 pwm=0.370 sd_pos=714322 sysload=0.22 cputime=142.326 memavail=7294884 print_time=2762.487 buffer_time=2.517 print_stall=0 extruder: target=240 temp=239.8 pwm=0.570
Stats 791228.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=3194413 bytes_read=1038236 bytes_retransmit=9 bytes_invalid=0 send_seq=73506 receive_seq=73506 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=80.2 pwm=0.310 sd_pos=714350 sysload=0.20 cputime=142.372 memavail=7294884 print_time=2763.433 buffer_time=2.462 print_stall=0 extruder: target=240 temp=239.6 pwm=0.630
Stats 791229.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=3194955 bytes_read=1038609 bytes_retransmit=9 bytes_invalid=0 send_seq=73525 receive_seq=73525 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992825 heater_bed: target=80 temp=80.2 pwm=0.310 sd_pos=714376 sysload=0.20 cputime=142.412 memavail=7294884 print_time=2763.978 buffer_time=2.007 print_stall=0 extruder: target=240 temp=239.9 pwm=0.475
Stats 791230.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=3195681 bytes_read=1038987 bytes_retransmit=9 bytes_invalid=0 send_seq=73545 receive_seq=73545 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=80.1 pwm=0.429 sd_pos=714376 sysload=0.20 cputime=142.459 memavail=7294884 print_time=2765.290 buffer_time=2.318 print_stall=0 extruder: target=240 temp=240.1 pwm=0.395
Stats 791231.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=3196105 bytes_read=1039384 bytes_retransmit=9 bytes_invalid=0 send_seq=73563 receive_seq=73563 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.1 pwm=0.435 sd_pos=714490 sysload=0.20 cputime=142.511 memavail=7294884 print_time=2766.580 buffer_time=2.607 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 791232.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=3196929 bytes_read=1039772 bytes_retransmit=9 bytes_invalid=0 send_seq=73585 receive_seq=73585 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=80.2 pwm=0.332 sd_pos=714662 sysload=0.20 cputime=142.565 memavail=7294884 print_time=2767.325 buffer_time=2.351 print_stall=0 extruder: target=240 temp=240.2 pwm=0.376
Stats 791233.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=3197301 bytes_read=1040140 bytes_retransmit=9 bytes_invalid=0 send_seq=73600 receive_seq=73600 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992825 heater_bed: target=80 temp=80.2 pwm=0.271 sd_pos=714717 sysload=0.19 cputime=142.615 memavail=7294884 print_time=2768.491 buffer_time=2.517 print_stall=0 extruder: target=240 temp=240.0 pwm=0.552
Stats 791234.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=3198433 bytes_read=1040587 bytes_retransmit=9 bytes_invalid=0 send_seq=73628 receive_seq=73628 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992825 heater_bed: target=80 temp=80.2 pwm=0.345 sd_pos=714931 sysload=0.19 cputime=142.667 memavail=7294884 print_time=2769.364 buffer_time=2.390 print_stall=0 extruder: target=240 temp=239.9 pwm=0.525
Stats 791235.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=3199916 bytes_read=1041035 bytes_retransmit=9 bytes_invalid=0 send_seq=73662 receive_seq=73662 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992822 heater_bed: target=80 temp=80.2 pwm=0.444 sd_pos=715199 sysload=0.19 cputime=142.722 memavail=7294884 print_time=2770.101 buffer_time=2.126 print_stall=0 extruder: target=240 temp=239.5 pwm=0.660
Stats 791236.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=3201369 bytes_read=1041478 bytes_retransmit=9 bytes_invalid=0 send_seq=73695 receive_seq=73695 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=20 freq=119992817 heater_bed: target=80 temp=80.2 pwm=0.381 sd_pos=715387 sysload=0.19 cputime=142.781 memavail=7294436 print_time=2771.325 buffer_time=2.349 print_stall=0 extruder: target=240 temp=239.5 pwm=0.678
Stats 791237.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=3202590 bytes_read=1041940 bytes_retransmit=9 bytes_invalid=0 send_seq=73726 receive_seq=73726 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=80.1 pwm=0.440 sd_pos=715504 sysload=0.19 cputime=142.846 memavail=7294436 print_time=2772.335 buffer_time=2.357 print_stall=0 extruder: target=240 temp=240.2 pwm=0.330
Stats 791238.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3203910 bytes_read=1042388 bytes_retransmit=9 bytes_invalid=0 send_seq=73757 receive_seq=73757 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=80.2 pwm=0.364 sd_pos=715618 sysload=0.17 cputime=142.905 memavail=7294436 print_time=2773.164 buffer_time=2.186 print_stall=0 extruder: target=240 temp=240.1 pwm=0.450
Stats 791239.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3207113 bytes_read=1042991 bytes_retransmit=9 bytes_invalid=0 send_seq=73819 receive_seq=73819 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=11 freq=119992850 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=716122 sysload=0.17 cputime=142.976 memavail=7294436 print_time=2774.804 buffer_time=2.824 print_stall=0 extruder: target=240 temp=240.1 pwm=0.506
Stats 791240.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3208426 bytes_read=1043448 bytes_retransmit=9 bytes_invalid=0 send_seq=73852 receive_seq=73852 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992841 heater_bed: target=80 temp=80.2 pwm=0.355 sd_pos=716373 sysload=0.17 cputime=143.031 memavail=7294436 print_time=2775.133 buffer_time=2.153 print_stall=0 extruder: target=240 temp=240.2 pwm=0.458
Stats 791241.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3212152 bytes_read=1044071 bytes_retransmit=9 bytes_invalid=0 send_seq=73921 receive_seq=73921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.2 pwm=0.355 sd_pos=717129 sysload=0.17 cputime=143.106 memavail=7294436 print_time=2776.231 buffer_time=2.250 print_stall=0 extruder: target=240 temp=239.8 pwm=0.640
Stats 791242.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3215901 bytes_read=1044714 bytes_retransmit=9 bytes_invalid=0 send_seq=73991 receive_seq=73991 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992880 heater_bed: target=80 temp=80.2 pwm=0.242 sd_pos=717608 sysload=0.17 cputime=143.170 memavail=7294436 print_time=2777.234 buffer_time=2.253 print_stall=0 extruder: target=240 temp=239.7 pwm=0.617
Stats 791243.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3218610 bytes_read=1045292 bytes_retransmit=9 bytes_invalid=0 send_seq=74045 receive_seq=74045 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992877 heater_bed: target=80 temp=80.2 pwm=0.299 sd_pos=717955 sysload=0.32 cputime=143.232 memavail=7293944 print_time=2778.159 buffer_time=2.178 print_stall=0 extruder: target=240 temp=239.9 pwm=0.501
Stats 791244.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3221401 bytes_read=1045845 bytes_retransmit=9 bytes_invalid=0 send_seq=74100 receive_seq=74100 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992865 heater_bed: target=80 temp=80.2 pwm=0.285 sd_pos=718211 sysload=0.32 cputime=143.305 memavail=7293944 print_time=2779.241 buffer_time=2.259 print_stall=0 extruder: target=240 temp=240.0 pwm=0.426
Stats 791245.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3223370 bytes_read=1046348 bytes_retransmit=9 bytes_invalid=0 send_seq=74142 receive_seq=74142 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.2 pwm=0.341 sd_pos=718387 sysload=0.32 cputime=143.365 memavail=7293944 print_time=2780.095 buffer_time=2.112 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 791246.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3225280 bytes_read=1046840 bytes_retransmit=9 bytes_invalid=0 send_seq=74182 receive_seq=74182 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=80.2 pwm=0.341 sd_pos=718574 sysload=0.32 cputime=143.429 memavail=7293944 print_time=2780.935 buffer_time=1.951 print_stall=0 extruder: target=240 temp=240.3 pwm=0.393
Stats 791247.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3227834 bytes_read=1047373 bytes_retransmit=9 bytes_invalid=0 send_seq=74233 receive_seq=74233 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=80.2 pwm=0.341 sd_pos=718789 sysload=0.32 cputime=143.508 memavail=7293440 print_time=2782.110 buffer_time=2.125 print_stall=0 extruder: target=240 temp=240.2 pwm=0.469
Stats 791248.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3230944 bytes_read=1047982 bytes_retransmit=9 bytes_invalid=0 send_seq=74293 receive_seq=74293 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992860 heater_bed: target=80 temp=80.2 pwm=0.268 sd_pos=719034 sysload=0.29 cputime=143.589 memavail=7293440 print_time=2783.481 buffer_time=2.495 print_stall=0 extruder: target=240 temp=240.1 pwm=0.469
Stats 791249.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3232922 bytes_read=1048484 bytes_retransmit=9 bytes_invalid=0 send_seq=74335 receive_seq=74335 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.2 pwm=0.337 sd_pos=719197 sysload=0.29 cputime=143.653 memavail=7293440 print_time=2784.321 buffer_time=2.333 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 791250.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3234967 bytes_read=1048977 bytes_retransmit=9 bytes_invalid=0 send_seq=74378 receive_seq=74378 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.2 pwm=0.273 sd_pos=719359 sysload=0.29 cputime=143.713 memavail=7293440 print_time=2785.276 buffer_time=2.287 print_stall=0 extruder: target=240 temp=239.9 pwm=0.501
Stats 791251.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3236368 bytes_read=1049420 bytes_retransmit=9 bytes_invalid=0 send_seq=74408 receive_seq=74408 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=80.2 pwm=0.352 sd_pos=719469 sysload=0.29 cputime=143.771 memavail=7293444 print_time=2786.087 buffer_time=2.097 print_stall=0 extruder: target=240 temp=240.0 pwm=0.518
Stats 791252.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3238305 bytes_read=1049917 bytes_retransmit=9 bytes_invalid=0 send_seq=74449 receive_seq=74449 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992889 heater_bed: target=80 temp=80.2 pwm=0.299 sd_pos=719594 sysload=0.29 cputime=143.827 memavail=7293444 print_time=2787.049 buffer_time=2.058 print_stall=0 extruder: target=240 temp=240.2 pwm=0.422
Stats 791253.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3241673 bytes_read=1050536 bytes_retransmit=9 bytes_invalid=0 send_seq=74514 receive_seq=74514 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=80.2 pwm=0.433 sd_pos=719989 sysload=0.27 cputime=143.897 memavail=7292944 print_time=2788.074 buffer_time=2.082 print_stall=0 extruder: target=240 temp=240.2 pwm=0.388
Stats 791254.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3245129 bytes_read=1051154 bytes_retransmit=9 bytes_invalid=0 send_seq=74579 receive_seq=74579 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992865 heater_bed: target=80 temp=80.2 pwm=0.354 sd_pos=720454 sysload=0.27 cputime=143.965 memavail=7292944 print_time=2789.508 buffer_time=2.514 print_stall=0 extruder: target=240 temp=239.8 pwm=0.562
Stats 791255.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3247078 bytes_read=1051651 bytes_retransmit=9 bytes_invalid=0 send_seq=74620 receive_seq=74620 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=80.2 pwm=0.328 sd_pos=720614 sysload=0.27 cputime=144.026 memavail=7292440 print_time=2790.373 buffer_time=2.378 print_stall=0 extruder: target=240 temp=239.8 pwm=0.562
Stats 791256.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3249005 bytes_read=1052124 bytes_retransmit=9 bytes_invalid=0 send_seq=74659 receive_seq=74659 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992846 heater_bed: target=80 temp=80.2 pwm=0.337 sd_pos=720776 sysload=0.27 cputime=144.079 memavail=7292440 print_time=2791.223 buffer_time=2.228 print_stall=0 extruder: target=240 temp=239.9 pwm=0.443
Stats 791257.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3250975 bytes_read=1052622 bytes_retransmit=9 bytes_invalid=0 send_seq=74700 receive_seq=74700 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.2 pwm=0.348 sd_pos=720940 sysload=0.27 cputime=144.141 memavail=7292440 print_time=2792.088 buffer_time=2.092 print_stall=0 extruder: target=240 temp=239.9 pwm=0.515
Stats 791258.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3254134 bytes_read=1053238 bytes_retransmit=9 bytes_invalid=0 send_seq=74762 receive_seq=74762 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=80.2 pwm=0.375 sd_pos=721324 sysload=0.25 cputime=144.214 memavail=7292440 print_time=2793.297 buffer_time=2.300 print_stall=0 extruder: target=240 temp=240.3 pwm=0.411
Stats 791259.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3255054 bytes_read=1053620 bytes_retransmit=9 bytes_invalid=0 send_seq=74784 receive_seq=74784 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=80.2 pwm=0.375 sd_pos=721380 sysload=0.25 cputime=144.263 memavail=7292440 print_time=2794.012 buffer_time=2.014 print_stall=0 extruder: target=240 temp=240.3 pwm=0.411
Stats 791260.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3256538 bytes_read=1054065 bytes_retransmit=9 bytes_invalid=0 send_seq=74816 receive_seq=74816 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.2 pwm=0.375 sd_pos=721491 sysload=0.25 cputime=144.317 memavail=7292440 print_time=2795.429 buffer_time=2.431 print_stall=0 extruder: target=240 temp=240.1 pwm=0.503
Stats 791261.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3257414 bytes_read=1054480 bytes_retransmit=9 bytes_invalid=0 send_seq=74841 receive_seq=74841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=80.1 pwm=0.466 sd_pos=721546 sysload=0.25 cputime=144.367 memavail=7292444 print_time=2796.145 buffer_time=2.146 print_stall=0 extruder: target=240 temp=240.0 pwm=0.515
Stats 791262.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3258987 bytes_read=1054938 bytes_retransmit=9 bytes_invalid=0 send_seq=74877 receive_seq=74877 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.1 pwm=0.395 sd_pos=721658 sysload=0.25 cputime=144.434 memavail=7292220 print_time=2797.562 buffer_time=2.563 print_stall=0 extruder: target=240 temp=240.1 pwm=0.404
Stats 791263.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3259853 bytes_read=1055361 bytes_retransmit=9 bytes_invalid=0 send_seq=74900 receive_seq=74900 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=80.1 pwm=0.443 sd_pos=721713 sysload=0.23 cputime=144.491 memavail=7291716 print_time=2798.264 buffer_time=2.264 print_stall=0 extruder: target=240 temp=240.0 pwm=0.467
Stats 791264.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3261407 bytes_read=1055833 bytes_retransmit=9 bytes_invalid=0 send_seq=74936 receive_seq=74936 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.1 pwm=0.428 sd_pos=721823 sysload=0.23 cputime=144.556 memavail=7291716 print_time=2799.681 buffer_time=2.680 print_stall=0 extruder: target=240 temp=239.8 pwm=0.552
Stats 791265.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3262298 bytes_read=1056231 bytes_retransmit=9 bytes_invalid=0 send_seq=74960 receive_seq=74960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.1 pwm=0.406 sd_pos=721879 sysload=0.23 cputime=144.611 memavail=7291716 print_time=2800.397 buffer_time=2.395 print_stall=0 extruder: target=240 temp=240.0 pwm=0.475
Stats 791266.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3263122 bytes_read=1056650 bytes_retransmit=9 bytes_invalid=0 send_seq=74983 receive_seq=74983 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=80.1 pwm=0.406 sd_pos=721934 sysload=0.23 cputime=144.663 memavail=7291716 print_time=2801.099 buffer_time=2.096 print_stall=0 extruder: target=240 temp=239.9 pwm=0.485
Stats 791267.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3264575 bytes_read=1057102 bytes_retransmit=9 bytes_invalid=0 send_seq=75015 receive_seq=75015 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=80.1 pwm=0.406 sd_pos=722044 sysload=0.23 cputime=144.724 memavail=7291716 print_time=2802.516 buffer_time=2.513 print_stall=0 extruder: target=240 temp=239.7 pwm=0.588
Stats 791268.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3265454 bytes_read=1057520 bytes_retransmit=9 bytes_invalid=0 send_seq=75040 receive_seq=75040 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.1 pwm=0.406 sd_pos=722100 sysload=0.21 cputime=144.788 memavail=7291716 print_time=2803.231 buffer_time=2.228 print_stall=0 extruder: target=240 temp=239.9 pwm=0.467
Stats 791269.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3266924 bytes_read=1057978 bytes_retransmit=9 bytes_invalid=0 send_seq=75073 receive_seq=75073 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=80.1 pwm=0.379 sd_pos=722210 sysload=0.21 cputime=144.852 memavail=7291716 print_time=2804.649 buffer_time=2.645 print_stall=0 extruder: target=240 temp=239.9 pwm=0.538
Stats 791270.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3267806 bytes_read=1058400 bytes_retransmit=9 bytes_invalid=0 send_seq=75099 receive_seq=75099 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=80.1 pwm=0.280 sd_pos=722263 sysload=0.21 cputime=144.909 memavail=7291716 print_time=2805.351 buffer_time=2.346 print_stall=0 extruder: target=240 temp=239.8 pwm=0.512
Stats 791271.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3268656 bytes_read=1058793 bytes_retransmit=9 bytes_invalid=0 send_seq=75122 receive_seq=75122 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=722328 sysload=0.21 cputime=144.960 memavail=7291716 print_time=2806.066 buffer_time=2.061 print_stall=0 extruder: target=240 temp=240.0 pwm=0.445
Stats 791272.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3270122 bytes_read=1059251 bytes_retransmit=9 bytes_invalid=0 send_seq=75155 receive_seq=75155 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992862 heater_bed: target=80 temp=80.1 pwm=0.410 sd_pos=722434 sysload=0.21 cputime=145.022 memavail=7291716 print_time=2807.483 buffer_time=2.477 print_stall=0 extruder: target=240 temp=240.0 pwm=0.445
Stats 791273.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3271026 bytes_read=1059683 bytes_retransmit=9 bytes_invalid=0 send_seq=75180 receive_seq=75180 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=80 temp=80.1 pwm=0.347 sd_pos=722489 sysload=0.19 cputime=145.078 memavail=7291968 print_time=2808.185 buffer_time=2.178 print_stall=0 extruder: target=240 temp=239.8 pwm=0.620
Stats 791274.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3272530 bytes_read=1060131 bytes_retransmit=9 bytes_invalid=0 send_seq=75214 receive_seq=75214 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=722612 sysload=0.19 cputime=145.134 memavail=7294816 print_time=2809.602 buffer_time=2.595 print_stall=0 extruder: target=240 temp=239.8 pwm=0.502
Stats 791275.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3273433 bytes_read=1060549 bytes_retransmit=9 bytes_invalid=0 send_seq=75239 receive_seq=75239 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=80 temp=80.1 pwm=0.366 sd_pos=722667 sysload=0.19 cputime=145.188 memavail=7294816 print_time=2810.318 buffer_time=2.310 print_stall=0 extruder: target=240 temp=239.9 pwm=0.470
Stats 791276.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3274280 bytes_read=1060956 bytes_retransmit=9 bytes_invalid=0 send_seq=75262 receive_seq=75262 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.0 pwm=0.366 sd_pos=722722 sysload=0.19 cputime=145.238 memavail=7294912 print_time=2811.020 buffer_time=2.011 print_stall=0 extruder: target=240 temp=240.4 pwm=0.286
Stats 791277.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3275848 bytes_read=1061414 bytes_retransmit=9 bytes_invalid=0 send_seq=75298 receive_seq=75298 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992843 heater_bed: target=80 temp=80.0 pwm=0.361 sd_pos=722833 sysload=0.19 cputime=145.295 memavail=7293896 print_time=2812.437 buffer_time=2.428 print_stall=0 extruder: target=240 temp=240.0 pwm=0.467
Stats 791278.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3276686 bytes_read=1061837 bytes_retransmit=9 bytes_invalid=0 send_seq=75321 receive_seq=75321 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.0 pwm=0.392 sd_pos=722888 sysload=0.18 cputime=145.338 memavail=7293896 print_time=2813.153 buffer_time=2.143 print_stall=0 extruder: target=240 temp=240.1 pwm=0.467
Stats 791279.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3278320 bytes_read=1062314 bytes_retransmit=9 bytes_invalid=0 send_seq=75358 receive_seq=75358 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=80.0 pwm=0.392 sd_pos=722998 sysload=0.18 cputime=145.372 memavail=7293896 print_time=2814.570 buffer_time=2.559 print_stall=0 extruder: target=240 temp=240.1 pwm=0.450
Stats 791280.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3279202 bytes_read=1062707 bytes_retransmit=9 bytes_invalid=0 send_seq=75381 receive_seq=75381 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992806 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=723054 sysload=0.18 cputime=145.410 memavail=7293896 print_time=2815.272 buffer_time=2.260 print_stall=0 extruder: target=240 temp=239.7 pwm=0.600
Stats 791281.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3280722 bytes_read=1063175 bytes_retransmit=9 bytes_invalid=0 send_seq=75416 receive_seq=75416 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992885 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=723165 sysload=0.18 cputime=145.458 memavail=7293896 print_time=2816.689 buffer_time=2.677 print_stall=0 extruder: target=240 temp=240.0 pwm=0.424
Stats 791282.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3281674 bytes_read=1063592 bytes_retransmit=9 bytes_invalid=0 send_seq=75441 receive_seq=75441 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992877 heater_bed: target=80 temp=79.9 pwm=0.465 sd_pos=723220 sysload=0.18 cputime=145.501 memavail=7293896 print_time=2817.405 buffer_time=2.392 print_stall=0 extruder: target=240 temp=239.8 pwm=0.593
Stats 791283.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3282547 bytes_read=1064000 bytes_retransmit=9 bytes_invalid=0 send_seq=75464 receive_seq=75464 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992866 heater_bed: target=80 temp=79.9 pwm=0.465 sd_pos=723277 sysload=0.16 cputime=145.552 memavail=7293656 print_time=2818.106 buffer_time=2.093 print_stall=0 extruder: target=240 temp=240.0 pwm=0.516
Stats 791284.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3284087 bytes_read=1064463 bytes_retransmit=9 bytes_invalid=0 send_seq=75498 receive_seq=75498 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992864 heater_bed: target=80 temp=79.9 pwm=0.410 sd_pos=723390 sysload=0.16 cputime=145.615 memavail=7293656 print_time=2819.524 buffer_time=2.509 print_stall=0 extruder: target=240 temp=239.9 pwm=0.527
Stats 791285.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3284993 bytes_read=1064875 bytes_retransmit=9 bytes_invalid=0 send_seq=75522 receive_seq=75522 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992898 heater_bed: target=80 temp=79.9 pwm=0.410 sd_pos=723445 sysload=0.16 cputime=145.669 memavail=7293656 print_time=2820.239 buffer_time=2.224 print_stall=0 extruder: target=240 temp=240.1 pwm=0.467
Stats 791286.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3286554 bytes_read=1065328 bytes_retransmit=9 bytes_invalid=0 send_seq=75557 receive_seq=75557 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992887 heater_bed: target=80 temp=79.9 pwm=0.387 sd_pos=723558 sysload=0.16 cputime=145.723 memavail=7293656 print_time=2821.657 buffer_time=2.640 print_stall=0 extruder: target=240 temp=239.9 pwm=0.556
Stats 791287.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3287465 bytes_read=1065741 bytes_retransmit=9 bytes_invalid=0 send_seq=75581 receive_seq=75581 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992872 heater_bed: target=80 temp=79.9 pwm=0.440 sd_pos=723615 sysload=0.16 cputime=145.770 memavail=7293656 print_time=2822.358 buffer_time=2.342 print_stall=0 extruder: target=240 temp=240.1 pwm=0.471
Stats 791288.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3288369 bytes_read=1066163 bytes_retransmit=9 bytes_invalid=0 send_seq=75604 receive_seq=75604 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992861 heater_bed: target=80 temp=79.9 pwm=0.440 sd_pos=723670 sysload=0.15 cputime=145.823 memavail=7293656 print_time=2823.074 buffer_time=2.057 print_stall=0 extruder: target=240 temp=239.8 pwm=0.541
Stats 791289.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3289909 bytes_read=1066611 bytes_retransmit=9 bytes_invalid=0 send_seq=75638 receive_seq=75638 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=79.9 pwm=0.440 sd_pos=723783 sysload=0.15 cputime=145.878 memavail=7293656 print_time=2824.491 buffer_time=2.473 print_stall=0 extruder: target=240 temp=240.0 pwm=0.489
Stats 791290.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3290792 bytes_read=1067024 bytes_retransmit=9 bytes_invalid=0 send_seq=75662 receive_seq=75662 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=79.9 pwm=0.356 sd_pos=723840 sysload=0.15 cputime=145.931 memavail=7293432 print_time=2825.193 buffer_time=2.174 print_stall=0 extruder: target=240 temp=239.9 pwm=0.522
Stats 791291.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3292339 bytes_read=1067491 bytes_retransmit=9 bytes_invalid=0 send_seq=75697 receive_seq=75697 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=79.9 pwm=0.505 sd_pos=723952 sysload=0.15 cputime=145.986 memavail=7293432 print_time=2826.610 buffer_time=2.590 print_stall=0 extruder: target=240 temp=240.1 pwm=0.463
Stats 791292.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3293239 bytes_read=1067879 bytes_retransmit=9 bytes_invalid=0 send_seq=75719 receive_seq=75719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992825 heater_bed: target=80 temp=79.9 pwm=0.441 sd_pos=724007 sysload=0.15 cputime=146.032 memavail=7293432 print_time=2827.326 buffer_time=2.305 print_stall=0 extruder: target=240 temp=240.1 pwm=0.527
Stats 791293.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3294123 bytes_read=1068307 bytes_retransmit=9 bytes_invalid=0 send_seq=75743 receive_seq=75743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=79.9 pwm=0.411 sd_pos=724065 sysload=0.14 cputime=146.085 memavail=7293184 print_time=2828.028 buffer_time=2.006 print_stall=0 extruder: target=240 temp=239.8 pwm=0.635
Stats 791294.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3295718 bytes_read=1068787 bytes_retransmit=9 bytes_invalid=0 send_seq=75781 receive_seq=75781 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=80 temp=79.8 pwm=0.522 sd_pos=724177 sysload=0.14 cputime=146.142 memavail=7293184 print_time=2829.445 buffer_time=2.423 print_stall=0 extruder: target=240 temp=240.0 pwm=0.519
Stats 791295.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3296626 bytes_read=1069183 bytes_retransmit=9 bytes_invalid=0 send_seq=75806 receive_seq=75806 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=79.8 pwm=0.590 sd_pos=724233 sysload=0.14 cputime=146.193 memavail=7293184 print_time=2830.161 buffer_time=2.138 print_stall=0 extruder: target=240 temp=240.2 pwm=0.410
Stats 791296.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3298169 bytes_read=1069644 bytes_retransmit=9 bytes_invalid=0 send_seq=75841 receive_seq=75841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=79.8 pwm=0.513 sd_pos=724359 sysload=0.14 cputime=146.249 memavail=7292960 print_time=2831.578 buffer_time=2.554 print_stall=0 extruder: target=240 temp=240.1 pwm=0.466
Stats 791297.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3299094 bytes_read=1070066 bytes_retransmit=9 bytes_invalid=0 send_seq=75867 receive_seq=75867 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=79.8 pwm=0.446 sd_pos=724414 sysload=0.14 cputime=146.299 memavail=7292960 print_time=2832.280 buffer_time=2.256 print_stall=0 extruder: target=240 temp=239.9 pwm=0.540
Stats 791298.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3300646 bytes_read=1070529 bytes_retransmit=9 bytes_invalid=0 send_seq=75901 receive_seq=75901 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=79.8 pwm=0.509 sd_pos=724538 sysload=0.12 cputime=146.356 memavail=7292736 print_time=2833.697 buffer_time=2.672 print_stall=0 extruder: target=240 temp=239.8 pwm=0.613
Stats 791299.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3301522 bytes_read=1070942 bytes_retransmit=9 bytes_invalid=0 send_seq=75925 receive_seq=75925 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=79.8 pwm=0.488 sd_pos=724605 sysload=0.12 cputime=146.414 memavail=7292736 print_time=2834.413 buffer_time=2.387 print_stall=0 extruder: target=240 temp=239.9 pwm=0.554
Stats 791300.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3302417 bytes_read=1071364 bytes_retransmit=9 bytes_invalid=0 send_seq=75951 receive_seq=75951 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=79.8 pwm=0.411 sd_pos=724662 sysload=0.12 cputime=146.467 memavail=7292736 print_time=2835.114 buffer_time=2.089 print_stall=0 extruder: target=240 temp=240.1 pwm=0.464
Stats 791301.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3303938 bytes_read=1071812 bytes_retransmit=9 bytes_invalid=0 send_seq=75985 receive_seq=75985 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=79.8 pwm=0.508 sd_pos=724777 sysload=0.12 cputime=146.527 memavail=7292736 print_time=2836.532 buffer_time=2.505 print_stall=0 extruder: target=240 temp=240.0 pwm=0.515
Stats 791302.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3304864 bytes_read=1072230 bytes_retransmit=9 bytes_invalid=0 send_seq=76010 receive_seq=76010 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=79.8 pwm=0.380 sd_pos=724847 sysload=0.12 cputime=146.576 memavail=7292736 print_time=2837.247 buffer_time=2.220 print_stall=0 extruder: target=240 temp=240.2 pwm=0.472
Stats 791303.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3306478 bytes_read=1072732 bytes_retransmit=9 bytes_invalid=0 send_seq=76049 receive_seq=76049 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=79.8 pwm=0.522 sd_pos=724962 sysload=0.19 cputime=146.640 memavail=7293696 print_time=2838.672 buffer_time=2.643 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 791304.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3308858 bytes_read=1073250 bytes_retransmit=9 bytes_invalid=0 send_seq=76097 receive_seq=76097 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=79.8 pwm=0.373 sd_pos=725597 sysload=0.19 cputime=146.692 memavail=7293696 print_time=2839.781 buffer_time=2.751 print_stall=0 extruder: target=240 temp=240.1 pwm=0.481
Stats 791305.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3309667 bytes_read=1073663 bytes_retransmit=9 bytes_invalid=0 send_seq=76121 receive_seq=76121 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=79.8 pwm=0.456 sd_pos=725655 sysload=0.19 cputime=146.739 memavail=7293696 print_time=2840.471 buffer_time=2.440 print_stall=0 extruder: target=240 temp=239.9 pwm=0.533
Stats 791306.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3311614 bytes_read=1074160 bytes_retransmit=9 bytes_invalid=0 send_seq=76162 receive_seq=76162 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=79.8 pwm=0.456 sd_pos=726049 sysload=0.19 cputime=146.798 memavail=7293696 print_time=2841.518 buffer_time=2.486 print_stall=0 extruder: target=240 temp=240.2 pwm=0.356
Stats 791307.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3312728 bytes_read=1074578 bytes_retransmit=9 bytes_invalid=0 send_seq=76190 receive_seq=76190 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=79.8 pwm=0.404 sd_pos=726106 sysload=0.19 cputime=146.867 memavail=7293232 print_time=2842.387 buffer_time=2.353 print_stall=0 extruder: target=240 temp=240.1 pwm=0.393
Stats 791308.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3315154 bytes_read=1075136 bytes_retransmit=9 bytes_invalid=0 send_seq=76240 receive_seq=76240 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=79.8 pwm=0.458 sd_pos=726826 sysload=0.18 cputime=146.945 memavail=7293232 print_time=2843.519 buffer_time=2.484 print_stall=0 extruder: target=240 temp=240.3 pwm=0.386
Stats 791309.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3317207 bytes_read=1075653 bytes_retransmit=9 bytes_invalid=0 send_seq=76285 receive_seq=76285 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=79.8 pwm=0.496 sd_pos=726935 sysload=0.18 cputime=147.011 memavail=7293232 print_time=2844.454 buffer_time=2.419 print_stall=0 extruder: target=240 temp=240.2 pwm=0.433
Stats 791310.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3317579 bytes_read=1076011 bytes_retransmit=9 bytes_invalid=0 send_seq=76301 receive_seq=76301 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=79.8 pwm=0.339 sd_pos=726992 sysload=0.18 cputime=147.065 memavail=7293232 print_time=2845.245 buffer_time=2.208 print_stall=0 extruder: target=240 temp=239.9 pwm=0.583
Stats 791311.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3318579 bytes_read=1076439 bytes_retransmit=9 bytes_invalid=0 send_seq=76328 receive_seq=76328 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=79.8 pwm=0.485 sd_pos=727049 sysload=0.18 cputime=147.127 memavail=7293232 print_time=2846.645 buffer_time=2.608 print_stall=0 extruder: target=240 temp=239.8 pwm=0.594
Stats 791312.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3319422 bytes_read=1076851 bytes_retransmit=9 bytes_invalid=0 send_seq=76352 receive_seq=76352 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=79.8 pwm=0.485 sd_pos=727049 sysload=0.18 cputime=147.185 memavail=7293232 print_time=2847.293 buffer_time=2.255 print_stall=0 extruder: target=240 temp=239.9 pwm=0.474
Stats 791313.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3320352 bytes_read=1077269 bytes_retransmit=9 bytes_invalid=0 send_seq=76377 receive_seq=76377 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=79.8 pwm=0.467 sd_pos=727106 sysload=0.16 cputime=147.250 memavail=7293484 print_time=2848.362 buffer_time=2.323 print_stall=0 extruder: target=240 temp=239.9 pwm=0.554
Stats 791314.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3320828 bytes_read=1077657 bytes_retransmit=9 bytes_invalid=0 send_seq=76396 receive_seq=76396 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=79.8 pwm=0.504 sd_pos=727162 sysload=0.16 cputime=147.309 memavail=7293484 print_time=2849.340 buffer_time=2.301 print_stall=0 extruder: target=240 temp=240.4 pwm=0.352
Stats 791315.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3321803 bytes_read=1078084 bytes_retransmit=9 bytes_invalid=0 send_seq=76423 receive_seq=76423 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=79.8 pwm=0.464 sd_pos=727220 sysload=0.16 cputime=147.363 memavail=7293484 print_time=2850.635 buffer_time=2.596 print_stall=0 extruder: target=240 temp=240.0 pwm=0.589
Stats 791316.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3322742 bytes_read=1078487 bytes_retransmit=9 bytes_invalid=0 send_seq=76448 receive_seq=76448 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=79.8 pwm=0.329 sd_pos=727279 sysload=0.16 cputime=147.424 memavail=7293484 print_time=2851.895 buffer_time=2.855 print_stall=0 extruder: target=240 temp=239.8 pwm=0.600
Stats 791317.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3323564 bytes_read=1078900 bytes_retransmit=9 bytes_invalid=0 send_seq=76472 receive_seq=76472 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=79.8 pwm=0.432 sd_pos=727279 sysload=0.16 cputime=147.492 memavail=7293484 print_time=2852.394 buffer_time=2.353 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 791318.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3323981 bytes_read=1079287 bytes_retransmit=9 bytes_invalid=0 send_seq=76488 receive_seq=76488 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=79.9 pwm=0.299 sd_pos=727336 sysload=0.23 cputime=147.555 memavail=7293484 print_time=2853.120 buffer_time=2.078 print_stall=0 extruder: target=240 temp=240.0 pwm=0.468
Stats 791319.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3324974 bytes_read=1079695 bytes_retransmit=9 bytes_invalid=0 send_seq=76514 receive_seq=76514 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=79.9 pwm=0.355 sd_pos=727391 sysload=0.23 cputime=147.615 memavail=7293484 print_time=2854.316 buffer_time=2.274 print_stall=0 extruder: target=240 temp=240.1 pwm=0.412
Stats 791320.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3326023 bytes_read=1080123 bytes_retransmit=9 bytes_invalid=0 send_seq=76541 receive_seq=76541 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=79.9 pwm=0.341 sd_pos=727449 sysload=0.23 cputime=147.677 memavail=7293484 print_time=2855.490 buffer_time=2.447 print_stall=0 extruder: target=240 temp=240.0 pwm=0.527
Stats 791321.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3326984 bytes_read=1080545 bytes_retransmit=9 bytes_invalid=0 send_seq=76567 receive_seq=76567 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.341 sd_pos=727508 sysload=0.23 cputime=147.732 memavail=7293484 print_time=2856.645 buffer_time=2.602 print_stall=0 extruder: target=240 temp=240.0 pwm=0.506
Stats 791322.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3327756 bytes_read=1080928 bytes_retransmit=9 bytes_invalid=0 send_seq=76588 receive_seq=76588 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.341 sd_pos=727508 sysload=0.23 cputime=147.776 memavail=7293484 print_time=2857.143 buffer_time=2.099 print_stall=0 extruder: target=240 temp=240.0 pwm=0.506
Stats 791323.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3328723 bytes_read=1081366 bytes_retransmit=9 bytes_invalid=0 send_seq=76614 receive_seq=76614 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=727565 sysload=0.21 cputime=147.835 memavail=7293236 print_time=2858.134 buffer_time=2.090 print_stall=0 extruder: target=240 temp=239.8 pwm=0.623
Stats 791324.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3329697 bytes_read=1081778 bytes_retransmit=9 bytes_invalid=0 send_seq=76638 receive_seq=76638 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=727622 sysload=0.21 cputime=147.897 memavail=7293240 print_time=2859.401 buffer_time=2.356 print_stall=0 extruder: target=240 temp=240.1 pwm=0.464
Stats 791325.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3330565 bytes_read=1082171 bytes_retransmit=9 bytes_invalid=0 send_seq=76661 receive_seq=76661 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=727680 sysload=0.21 cputime=147.950 memavail=7293240 print_time=2860.357 buffer_time=2.312 print_stall=0 extruder: target=240 temp=240.0 pwm=0.543
Stats 791326.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3330955 bytes_read=1082549 bytes_retransmit=9 bytes_invalid=0 send_seq=76678 receive_seq=76678 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=727739 sysload=0.21 cputime=148.004 memavail=7293240 print_time=2861.091 buffer_time=2.046 print_stall=0 extruder: target=240 temp=239.6 pwm=0.684
Stats 791327.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3331948 bytes_read=1082982 bytes_retransmit=9 bytes_invalid=0 send_seq=76704 receive_seq=76704 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.337 sd_pos=727797 sysload=0.21 cputime=148.066 memavail=7293240 print_time=2862.158 buffer_time=2.111 print_stall=0 extruder: target=240 temp=239.8 pwm=0.550
Stats 791328.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3332876 bytes_read=1083390 bytes_retransmit=9 bytes_invalid=0 send_seq=76727 receive_seq=76727 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=80.1 pwm=0.244 sd_pos=727867 sysload=0.28 cputime=148.132 memavail=7293240 print_time=2863.204 buffer_time=2.157 print_stall=0 extruder: target=240 temp=240.0 pwm=0.492
Stats 791329.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3333816 bytes_read=1083808 bytes_retransmit=9 bytes_invalid=0 send_seq=76752 receive_seq=76752 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=727926 sysload=0.28 cputime=148.192 memavail=7293240 print_time=2864.231 buffer_time=2.183 print_stall=0 extruder: target=240 temp=240.2 pwm=0.422
Stats 791330.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3334784 bytes_read=1084220 bytes_retransmit=9 bytes_invalid=0 send_seq=76777 receive_seq=76777 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=80 temp=80.0 pwm=0.347 sd_pos=727985 sysload=0.28 cputime=148.247 memavail=7293240 print_time=2865.238 buffer_time=2.190 print_stall=0 extruder: target=240 temp=239.9 pwm=0.574
Stats 791331.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3335683 bytes_read=1084601 bytes_retransmit=9 bytes_invalid=0 send_seq=76799 receive_seq=76799 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.1 pwm=0.347 sd_pos=728055 sysload=0.28 cputime=148.298 memavail=7293240 print_time=2866.238 buffer_time=2.188 print_stall=0 extruder: target=240 temp=239.9 pwm=0.543
Stats 791332.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3336685 bytes_read=1085018 bytes_retransmit=9 bytes_invalid=0 send_seq=76825 receive_seq=76825 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.1 pwm=0.347 sd_pos=728112 sysload=0.28 cputime=148.364 memavail=7292988 print_time=2867.219 buffer_time=2.169 print_stall=0 extruder: target=240 temp=239.9 pwm=0.543
Stats 791333.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3338383 bytes_read=1085510 bytes_retransmit=9 bytes_invalid=0 send_seq=76862 receive_seq=76862 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.1 pwm=0.404 sd_pos=728462 sysload=0.25 cputime=148.446 memavail=7293240 print_time=2868.426 buffer_time=2.375 print_stall=0 extruder: target=240 temp=240.0 pwm=0.463
Stats 791334.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3339834 bytes_read=1085948 bytes_retransmit=9 bytes_invalid=0 send_seq=76894 receive_seq=76894 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.1 pwm=0.395 sd_pos=728800 sysload=0.25 cputime=148.515 memavail=7293240 print_time=2869.496 buffer_time=2.444 print_stall=0 extruder: target=240 temp=239.8 pwm=0.542
Stats 791335.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3342093 bytes_read=1086476 bytes_retransmit=9 bytes_invalid=0 send_seq=76941 receive_seq=76941 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.1 pwm=0.395 sd_pos=729403 sysload=0.25 cputime=148.587 memavail=7293240 print_time=2870.813 buffer_time=2.761 print_stall=0 extruder: target=240 temp=239.9 pwm=0.532
Stats 791336.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3342843 bytes_read=1086878 bytes_retransmit=9 bytes_invalid=0 send_seq=76963 receive_seq=76963 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.1 pwm=0.318 sd_pos=729433 sysload=0.25 cputime=148.650 memavail=7293044 print_time=2871.439 buffer_time=2.387 print_stall=0 extruder: target=240 temp=240.0 pwm=0.528
Stats 791337.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3345346 bytes_read=1087396 bytes_retransmit=9 bytes_invalid=0 send_seq=77011 receive_seq=77011 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.1 pwm=0.383 sd_pos=729869 sysload=0.25 cputime=148.725 memavail=7293212 print_time=2872.946 buffer_time=2.892 print_stall=0 extruder: target=240 temp=239.9 pwm=0.578
Stats 791338.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3347931 bytes_read=1087969 bytes_retransmit=9 bytes_invalid=0 send_seq=77064 receive_seq=77064 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.1 pwm=0.312 sd_pos=730899 sysload=0.47 cputime=148.799 memavail=7293212 print_time=2874.130 buffer_time=3.076 print_stall=0 extruder: target=240 temp=239.8 pwm=0.602
Stats 791339.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3348109 bytes_read=1088326 bytes_retransmit=9 bytes_invalid=0 send_seq=77077 receive_seq=77077 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.1 pwm=0.312 sd_pos=730899 sysload=0.47 cputime=148.846 memavail=7293212 print_time=2874.130 buffer_time=2.075 print_stall=0 extruder: target=240 temp=239.8 pwm=0.570
Stats 791340.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3349047 bytes_read=1088724 bytes_retransmit=9 bytes_invalid=0 send_seq=77101 receive_seq=77101 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=80.1 pwm=0.384 sd_pos=731212 sysload=0.47 cputime=148.903 memavail=7293212 print_time=2875.162 buffer_time=2.106 print_stall=0 extruder: target=240 temp=239.9 pwm=0.521
Stats 791341.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3349890 bytes_read=1089132 bytes_retransmit=9 bytes_invalid=0 send_seq=77124 receive_seq=77124 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.2 pwm=0.286 sd_pos=731465 sysload=0.47 cputime=148.961 memavail=7293212 print_time=2876.196 buffer_time=2.139 print_stall=0 extruder: target=240 temp=240.1 pwm=0.521
Stats 791342.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3350726 bytes_read=1089544 bytes_retransmit=9 bytes_invalid=0 send_seq=77148 receive_seq=77148 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.1 pwm=0.376 sd_pos=731666 sysload=0.47 cputime=149.022 memavail=7293212 print_time=2877.115 buffer_time=2.058 print_stall=0 extruder: target=240 temp=240.1 pwm=0.503
Stats 791343.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3351093 bytes_read=1089907 bytes_retransmit=9 bytes_invalid=0 send_seq=77162 receive_seq=77162 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.2 pwm=0.281 sd_pos=731695 sysload=0.44 cputime=149.076 memavail=7293216 print_time=2878.600 buffer_time=2.542 print_stall=0 extruder: target=240 temp=240.1 pwm=0.503
Stats 791344.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3351737 bytes_read=1090324 bytes_retransmit=9 bytes_invalid=0 send_seq=77184 receive_seq=77184 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.2 pwm=0.267 sd_pos=731746 sysload=0.44 cputime=149.127 memavail=7293216 print_time=2880.038 buffer_time=2.978 print_stall=0 extruder: target=240 temp=240.2 pwm=0.462
Stats 791345.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3352305 bytes_read=1090712 bytes_retransmit=9 bytes_invalid=0 send_seq=77206 receive_seq=77206 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.2 pwm=0.241 sd_pos=731746 sysload=0.44 cputime=149.179 memavail=7293216 print_time=2880.293 buffer_time=2.233 print_stall=0 extruder: target=240 temp=240.3 pwm=0.441
Stats 791346.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3352739 bytes_read=1091070 bytes_retransmit=9 bytes_invalid=0 send_seq=77222 receive_seq=77222 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=80.2 pwm=0.320 sd_pos=731746 sysload=0.44 cputime=149.237 memavail=7293216 print_time=2881.333 buffer_time=2.272 print_stall=0 extruder: target=240 temp=240.2 pwm=0.473
Stats 791347.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3353110 bytes_read=1091452 bytes_retransmit=9 bytes_invalid=0 send_seq=77237 receive_seq=77237 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=80.2 pwm=0.320 sd_pos=731858 sysload=0.44 cputime=149.289 memavail=7293216 print_time=2882.619 buffer_time=2.558 print_stall=0 extruder: target=240 temp=239.8 pwm=0.585
Stats 791348.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=3354022 bytes_read=1091860 bytes_retransmit=9 bytes_invalid=0 send_seq=77260 receive_seq=77260 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=80.2 pwm=0.411 sd_pos=732408 sysload=0.40 cputime=149.353 memavail=7292992 print_time=2883.768 buffer_time=2.705 print_stall=0 extruder: target=240 temp=240.1 pwm=0.413
Stats 791349.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=3354567 bytes_read=1092228 bytes_retransmit=9 bytes_invalid=0 send_seq=77278 receive_seq=77278 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.2 pwm=0.269 sd_pos=732463 sysload=0.40 cputime=149.406 memavail=7292992 print_time=2884.734 buffer_time=2.670 print_stall=0 extruder: target=240 temp=239.8 pwm=0.556
Stats 791350.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=3355476 bytes_read=1092655 bytes_retransmit=9 bytes_invalid=0 send_seq=77302 receive_seq=77302 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.2 pwm=0.269 sd_pos=732892 sysload=0.40 cputime=149.465 memavail=7292992 print_time=2885.779 buffer_time=2.714 print_stall=0 extruder: target=240 temp=239.8 pwm=0.600
Stats 791351.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=3356347 bytes_read=1093048 bytes_retransmit=9 bytes_invalid=0 send_seq=77325 receive_seq=77325 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992806 heater_bed: target=80 temp=80.2 pwm=0.269 sd_pos=733095 sysload=0.40 cputime=149.512 memavail=7292992 print_time=2886.258 buffer_time=2.192 print_stall=0 extruder: target=240 temp=240.1 pwm=0.477
Stats 791352.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=3358039 bytes_read=1093516 bytes_retransmit=9 bytes_invalid=0 send_seq=77363 receive_seq=77363 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.3 pwm=0.275 sd_pos=733298 sysload=0.40 cputime=149.571 memavail=7292992 print_time=2888.664 buffer_time=3.598 print_stall=0 extruder: target=240 temp=239.9 pwm=0.543
Stats 791353.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3358255 bytes_read=1093908 bytes_retransmit=9 bytes_invalid=0 send_seq=77377 receive_seq=77377 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=80.2 pwm=0.344 sd_pos=733298 sysload=0.37 cputime=149.629 memavail=7292992 print_time=2888.664 buffer_time=2.597 print_stall=0 extruder: target=240 temp=240.3 pwm=0.341
Stats 791354.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3358836 bytes_read=1094281 bytes_retransmit=9 bytes_invalid=0 send_seq=77396 receive_seq=77396 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=80.2 pwm=0.344 sd_pos=733384 sysload=0.37 cputime=149.683 memavail=7292996 print_time=2890.275 buffer_time=3.207 print_stall=0 extruder: target=240 temp=240.3 pwm=0.439
Stats 791355.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3359041 bytes_read=1094629 bytes_retransmit=9 bytes_invalid=0 send_seq=77410 receive_seq=77410 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.2 pwm=0.465 sd_pos=733384 sysload=0.37 cputime=149.733 memavail=7292996 print_time=2890.275 buffer_time=2.206 print_stall=0 extruder: target=240 temp=240.5 pwm=0.346
Stats 791356.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3359352 bytes_read=1095021 bytes_retransmit=9 bytes_invalid=0 send_seq=77427 receive_seq=77427 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.2 pwm=0.240 sd_pos=733424 sysload=0.37 cputime=149.789 memavail=7292548 print_time=2891.220 buffer_time=2.151 print_stall=0 extruder: target=240 temp=240.0 pwm=0.588
Stats 791357.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3360258 bytes_read=1095414 bytes_retransmit=9 bytes_invalid=0 send_seq=77450 receive_seq=77450 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.2 pwm=0.355 sd_pos=733424 sysload=0.37 cputime=149.840 memavail=7292548 print_time=2892.226 buffer_time=2.156 print_stall=0 extruder: target=240 temp=240.2 pwm=0.493
Stats 791358.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=3360783 bytes_read=1095792 bytes_retransmit=9 bytes_invalid=0 send_seq=77467 receive_seq=77467 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.2 pwm=0.458 sd_pos=733550 sysload=0.34 cputime=149.906 memavail=7292548 print_time=2894.367 buffer_time=3.296 print_stall=0 extruder: target=240 temp=239.9 pwm=0.553
Stats 791359.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=3360977 bytes_read=1096169 bytes_retransmit=9 bytes_invalid=0 send_seq=77481 receive_seq=77481 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.1 pwm=0.440 sd_pos=733550 sysload=0.34 cputime=149.960 memavail=7292548 print_time=2894.367 buffer_time=2.295 print_stall=0 extruder: target=240 temp=239.9 pwm=0.546
Stats 791360.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=3361899 bytes_read=1096572 bytes_retransmit=9 bytes_invalid=0 send_seq=77506 receive_seq=77506 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=733734 sysload=0.34 cputime=150.023 memavail=7292548 print_time=2895.112 buffer_time=2.039 print_stall=0 extruder: target=240 temp=240.1 pwm=0.476
Stats 791361.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=3362274 bytes_read=1096920 bytes_retransmit=9 bytes_invalid=0 send_seq=77520 receive_seq=77520 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.2 pwm=0.312 sd_pos=733789 sysload=0.34 cputime=150.078 memavail=7292548 print_time=2896.278 buffer_time=2.205 print_stall=0 extruder: target=240 temp=240.0 pwm=0.542
Stats 791362.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=3363347 bytes_read=1097362 bytes_retransmit=9 bytes_invalid=0 send_seq=77547 receive_seq=77547 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.2 pwm=0.312 sd_pos=733905 sysload=0.34 cputime=150.153 memavail=7292548 print_time=2897.135 buffer_time=2.061 print_stall=0 extruder: target=240 temp=240.1 pwm=0.538
Stats 791363.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=3366100 bytes_read=1097935 bytes_retransmit=9 bytes_invalid=0 send_seq=77603 receive_seq=77603 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.2 pwm=0.372 sd_pos=734271 sysload=0.71 cputime=150.232 memavail=7292076 print_time=2898.602 buffer_time=2.527 print_stall=0 extruder: target=240 temp=240.0 pwm=0.528
Stats 791364.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=3368779 bytes_read=1098478 bytes_retransmit=9 bytes_invalid=0 send_seq=77656 receive_seq=77656 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=80.2 pwm=0.372 sd_pos=734884 sysload=0.71 cputime=150.307 memavail=7292076 print_time=2899.337 buffer_time=2.261 print_stall=0 extruder: target=240 temp=240.3 pwm=0.389
Stats 791365.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=3372342 bytes_read=1099115 bytes_retransmit=9 bytes_invalid=0 send_seq=77722 receive_seq=77722 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.2 pwm=0.372 sd_pos=735570 sysload=0.71 cputime=150.392 memavail=7292076 print_time=2900.224 buffer_time=2.146 print_stall=0 extruder: target=240 temp=239.9 pwm=0.561
Stats 791366.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=3376642 bytes_read=1099777 bytes_retransmit=9 bytes_invalid=0 send_seq=77800 receive_seq=77800 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=80.2 pwm=0.240 sd_pos=736063 sysload=0.71 cputime=150.476 memavail=7291972 print_time=2901.235 buffer_time=2.155 print_stall=0 extruder: target=240 temp=240.0 pwm=0.467
Stats 791367.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=3379484 bytes_read=1100337 bytes_retransmit=9 bytes_invalid=0 send_seq=77855 receive_seq=77855 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=80.2 pwm=0.239 sd_pos=736309 sysload=0.71 cputime=150.542 memavail=7292044 print_time=2902.218 buffer_time=2.138 print_stall=0 extruder: target=240 temp=240.3 pwm=0.365
Stats 791368.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=3382236 bytes_read=1100916 bytes_retransmit=9 bytes_invalid=0 send_seq=77910 receive_seq=77910 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=80 temp=80.2 pwm=0.385 sd_pos=736530 sysload=0.66 cputime=150.601 memavail=7292044 print_time=2903.267 buffer_time=2.186 print_stall=0 extruder: target=240 temp=240.4 pwm=0.366
Stats 791369.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=3385010 bytes_read=1101464 bytes_retransmit=9 bytes_invalid=0 send_seq=77964 receive_seq=77964 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992824 heater_bed: target=80 temp=80.2 pwm=0.385 sd_pos=736754 sysload=0.66 cputime=150.660 memavail=7292044 print_time=2904.310 buffer_time=2.228 print_stall=0 extruder: target=240 temp=240.5 pwm=0.358
Stats 791370.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=3387794 bytes_read=1102027 bytes_retransmit=9 bytes_invalid=0 send_seq=78018 receive_seq=78018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=80.2 pwm=0.238 sd_pos=736977 sysload=0.66 cputime=150.713 memavail=7292044 print_time=2905.354 buffer_time=2.271 print_stall=0 extruder: target=240 temp=240.1 pwm=0.559
Stats 791371.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=3390594 bytes_read=1102604 bytes_retransmit=9 bytes_invalid=0 send_seq=78075 receive_seq=78075 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=80.2 pwm=0.310 sd_pos=737201 sysload=0.66 cputime=150.774 memavail=7292044 print_time=2906.397 buffer_time=2.313 print_stall=0 extruder: target=240 temp=240.1 pwm=0.507
Stats 791372.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=3393387 bytes_read=1103157 bytes_retransmit=9 bytes_invalid=0 send_seq=78130 receive_seq=78130 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.2 pwm=0.442 sd_pos=737425 sysload=0.66 cputime=150.838 memavail=7292044 print_time=2907.441 buffer_time=2.356 print_stall=0 extruder: target=240 temp=239.9 pwm=0.564
Stats 791373.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3396235 bytes_read=1103746 bytes_retransmit=9 bytes_invalid=0 send_seq=78186 receive_seq=78186 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992842 heater_bed: target=80 temp=80.2 pwm=0.349 sd_pos=737674 sysload=0.76 cputime=150.906 memavail=7291796 print_time=2908.518 buffer_time=2.433 print_stall=0 extruder: target=240 temp=240.3 pwm=0.358
Stats 791374.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3398325 bytes_read=1104243 bytes_retransmit=9 bytes_invalid=0 send_seq=78227 receive_seq=78227 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.2 pwm=0.349 sd_pos=737842 sysload=0.76 cputime=150.964 memavail=7291796 print_time=2909.348 buffer_time=2.262 print_stall=0 extruder: target=240 temp=240.1 pwm=0.456
Stats 791375.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3401716 bytes_read=1104841 bytes_retransmit=9 bytes_invalid=0 send_seq=78291 receive_seq=78291 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.2 pwm=0.361 sd_pos=738079 sysload=0.76 cputime=151.034 memavail=7291796 print_time=2910.880 buffer_time=2.793 print_stall=0 extruder: target=240 temp=240.1 pwm=0.484
Stats 791376.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3404024 bytes_read=1105364 bytes_retransmit=9 bytes_invalid=0 send_seq=78337 receive_seq=78337 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=80.2 pwm=0.361 sd_pos=738352 sysload=0.76 cputime=151.095 memavail=7291796 print_time=2911.328 buffer_time=2.240 print_stall=0 extruder: target=240 temp=240.0 pwm=0.484
Stats 791377.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3407855 bytes_read=1106011 bytes_retransmit=9 bytes_invalid=0 send_seq=78408 receive_seq=78408 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.2 pwm=0.361 sd_pos=738681 sysload=0.76 cputime=151.173 memavail=7291796 print_time=2912.533 buffer_time=2.445 print_stall=0 extruder: target=240 temp=239.7 pwm=0.607
Stats 791378.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3410537 bytes_read=1106575 bytes_retransmit=9 bytes_invalid=0 send_seq=78462 receive_seq=78462 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=80.2 pwm=0.263 sd_pos=738903 sysload=0.70 cputime=151.252 memavail=7291796 print_time=2913.564 buffer_time=2.475 print_stall=0 extruder: target=240 temp=240.1 pwm=0.386
Stats 791379.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3413246 bytes_read=1107133 bytes_retransmit=9 bytes_invalid=0 send_seq=78515 receive_seq=78515 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.1 pwm=0.403 sd_pos=739126 sysload=0.70 cputime=151.322 memavail=7291796 print_time=2914.594 buffer_time=2.505 print_stall=0 extruder: target=240 temp=240.1 pwm=0.435
Stats 791380.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3414678 bytes_read=1107590 bytes_retransmit=9 bytes_invalid=0 send_seq=78548 receive_seq=78548 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=80.1 pwm=0.403 sd_pos=739238 sysload=0.70 cputime=151.387 memavail=7291796 print_time=2915.110 buffer_time=2.020 print_stall=0 extruder: target=240 temp=240.1 pwm=0.432
Stats 791381.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3417386 bytes_read=1108128 bytes_retransmit=9 bytes_invalid=0 send_seq=78600 receive_seq=78600 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.2 pwm=0.233 sd_pos=739462 sysload=0.70 cputime=151.453 memavail=7291796 print_time=2916.140 buffer_time=2.049 print_stall=0 extruder: target=240 temp=240.4 pwm=0.372
Stats 791382.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3420799 bytes_read=1108741 bytes_retransmit=9 bytes_invalid=0 send_seq=78664 receive_seq=78664 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=80.1 pwm=0.392 sd_pos=739698 sysload=0.70 cputime=151.531 memavail=7291796 print_time=2917.645 buffer_time=2.553 print_stall=0 extruder: target=240 temp=240.1 pwm=0.421
Stats 791383.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3421778 bytes_read=1109184 bytes_retransmit=9 bytes_invalid=0 send_seq=78691 receive_seq=78691 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.1 pwm=0.400 sd_pos=739755 sysload=0.73 cputime=151.585 memavail=7291572 print_time=2918.279 buffer_time=2.186 print_stall=0 extruder: target=240 temp=239.9 pwm=0.500
Stats 791384.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3423414 bytes_read=1109642 bytes_retransmit=9 bytes_invalid=0 send_seq=78727 receive_seq=78727 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=80 temp=80.1 pwm=0.368 sd_pos=739869 sysload=0.73 cputime=151.640 memavail=7291572 print_time=2919.533 buffer_time=2.440 print_stall=0 extruder: target=240 temp=239.8 pwm=0.507
Stats 791385.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3424262 bytes_read=1110045 bytes_retransmit=9 bytes_invalid=0 send_seq=78749 receive_seq=78749 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=80.1 pwm=0.318 sd_pos=739926 sysload=0.73 cputime=151.692 memavail=7291572 print_time=2920.153 buffer_time=2.059 print_stall=0 extruder: target=240 temp=239.8 pwm=0.507
Stats 791386.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3425962 bytes_read=1110527 bytes_retransmit=9 bytes_invalid=0 send_seq=78787 receive_seq=78787 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.1 pwm=0.380 sd_pos=740052 sysload=0.73 cputime=151.750 memavail=7291572 print_time=2921.408 buffer_time=2.312 print_stall=0 extruder: target=240 temp=239.9 pwm=0.446
Stats 791388.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3427586 bytes_read=1110985 bytes_retransmit=9 bytes_invalid=0 send_seq=78823 receive_seq=78823 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.1 pwm=0.335 sd_pos=740166 sysload=0.73 cputime=151.802 memavail=7291572 print_time=2922.662 buffer_time=2.566 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 791389.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3428595 bytes_read=1111434 bytes_retransmit=9 bytes_invalid=0 send_seq=78849 receive_seq=78849 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.1 pwm=0.323 sd_pos=740235 sysload=0.67 cputime=151.856 memavail=7291572 print_time=2923.296 buffer_time=2.199 print_stall=0 extruder: target=240 temp=240.0 pwm=0.497
Stats 791390.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3430299 bytes_read=1111921 bytes_retransmit=9 bytes_invalid=0 send_seq=78888 receive_seq=78888 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.1 pwm=0.310 sd_pos=740349 sysload=0.67 cputime=151.912 memavail=7291572 print_time=2924.550 buffer_time=2.452 print_stall=0 extruder: target=240 temp=240.0 pwm=0.479
Stats 791391.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3431183 bytes_read=1112319 bytes_retransmit=9 bytes_invalid=0 send_seq=78912 receive_seq=78912 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=80 temp=80.1 pwm=0.431 sd_pos=740405 sysload=0.67 cputime=151.958 memavail=7291572 print_time=2925.170 buffer_time=2.071 print_stall=0 extruder: target=240 temp=239.8 pwm=0.545
Stats 791392.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3432861 bytes_read=1112797 bytes_retransmit=9 bytes_invalid=0 send_seq=78949 receive_seq=78949 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=80.1 pwm=0.333 sd_pos=740519 sysload=0.67 cputime=152.012 memavail=7291572 print_time=2926.425 buffer_time=2.325 print_stall=0 extruder: target=240 temp=239.8 pwm=0.545
Stats 791393.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3434517 bytes_read=1113284 bytes_retransmit=9 bytes_invalid=0 send_seq=78988 receive_seq=78988 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.1 pwm=0.358 sd_pos=740632 sysload=0.67 cputime=152.067 memavail=7291572 print_time=2927.679 buffer_time=2.579 print_stall=0 extruder: target=240 temp=239.8 pwm=0.535
Stats 791394.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3435557 bytes_read=1113707 bytes_retransmit=9 bytes_invalid=0 send_seq=79014 receive_seq=79014 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=80.1 pwm=0.279 sd_pos=740689 sysload=1.01 cputime=152.117 memavail=7291580 print_time=2928.313 buffer_time=2.213 print_stall=0 extruder: target=240 temp=239.9 pwm=0.448
Stats 791395.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3437249 bytes_read=1114185 bytes_retransmit=9 bytes_invalid=0 send_seq=79051 receive_seq=79051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=80.1 pwm=0.370 sd_pos=740803 sysload=1.01 cputime=152.176 memavail=7291580 print_time=2929.567 buffer_time=2.467 print_stall=0 extruder: target=240 temp=240.1 pwm=0.435
Stats 791396.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3438190 bytes_read=1114612 bytes_retransmit=9 bytes_invalid=0 send_seq=79078 receive_seq=79078 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992843 heater_bed: target=80 temp=80.1 pwm=0.351 sd_pos=740860 sysload=1.01 cputime=152.228 memavail=7291580 print_time=2930.187 buffer_time=2.086 print_stall=0 extruder: target=240 temp=239.9 pwm=0.513
Stats 791397.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3439809 bytes_read=1115060 bytes_retransmit=9 bytes_invalid=0 send_seq=79112 receive_seq=79112 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=80 temp=80.1 pwm=0.351 sd_pos=740972 sysload=1.01 cputime=152.290 memavail=7291328 print_time=2931.442 buffer_time=2.340 print_stall=0 extruder: target=240 temp=239.7 pwm=0.597
Stats 791398.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3441456 bytes_read=1115533 bytes_retransmit=9 bytes_invalid=0 send_seq=79148 receive_seq=79148 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.1 pwm=0.427 sd_pos=741086 sysload=1.01 cputime=152.338 memavail=7291328 print_time=2932.696 buffer_time=2.594 print_stall=0 extruder: target=240 temp=239.7 pwm=0.547
Stats 791399.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3442420 bytes_read=1115965 bytes_retransmit=9 bytes_invalid=0 send_seq=79173 receive_seq=79173 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=80.0 pwm=0.385 sd_pos=741143 sysload=0.93 cputime=152.371 memavail=7291328 print_time=2933.330 buffer_time=2.227 print_stall=0 extruder: target=240 temp=239.8 pwm=0.482
Stats 791400.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3444093 bytes_read=1116428 bytes_retransmit=9 bytes_invalid=0 send_seq=79210 receive_seq=79210 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992872 heater_bed: target=80 temp=80.0 pwm=0.379 sd_pos=741256 sysload=0.93 cputime=152.428 memavail=7291328 print_time=2934.584 buffer_time=2.481 print_stall=0 extruder: target=240 temp=240.1 pwm=0.399
Stats 791401.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3444982 bytes_read=1116836 bytes_retransmit=9 bytes_invalid=0 send_seq=79233 receive_seq=79233 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992860 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=741313 sysload=0.93 cputime=152.494 memavail=7291328 print_time=2935.204 buffer_time=2.101 print_stall=0 extruder: target=240 temp=240.1 pwm=0.485
Stats 791402.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3446638 bytes_read=1117312 bytes_retransmit=9 bytes_invalid=0 send_seq=79270 receive_seq=79270 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=741427 sysload=0.93 cputime=152.546 memavail=7291328 print_time=2936.459 buffer_time=2.354 print_stall=0 extruder: target=240 temp=240.0 pwm=0.484
Stats 791403.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3448218 bytes_read=1117758 bytes_retransmit=9 bytes_invalid=0 send_seq=79305 receive_seq=79305 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=741539 sysload=0.93 cputime=152.603 memavail=7291328 print_time=2937.713 buffer_time=2.608 print_stall=0 extruder: target=240 temp=240.1 pwm=0.428
Stats 791404.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3449235 bytes_read=1118183 bytes_retransmit=9 bytes_invalid=0 send_seq=79330 receive_seq=79330 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=79.9 pwm=0.538 sd_pos=741596 sysload=1.02 cputime=152.657 memavail=7291840 print_time=2938.347 buffer_time=2.241 print_stall=0 extruder: target=240 temp=239.8 pwm=0.610
Stats 791405.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3450940 bytes_read=1118669 bytes_retransmit=9 bytes_invalid=0 send_seq=79369 receive_seq=79369 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=80 temp=79.9 pwm=0.363 sd_pos=741710 sysload=1.02 cputime=152.714 memavail=7291840 print_time=2939.601 buffer_time=2.495 print_stall=0 extruder: target=240 temp=239.8 pwm=0.532
Stats 791406.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3451856 bytes_read=1119067 bytes_retransmit=9 bytes_invalid=0 send_seq=79393 receive_seq=79393 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=79.9 pwm=0.386 sd_pos=741766 sysload=1.02 cputime=152.762 memavail=7291840 print_time=2940.221 buffer_time=2.115 print_stall=0 extruder: target=240 temp=239.8 pwm=0.543
Stats 791407.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3453506 bytes_read=1119535 bytes_retransmit=9 bytes_invalid=0 send_seq=79428 receive_seq=79428 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=79.9 pwm=0.376 sd_pos=741878 sysload=1.02 cputime=152.833 memavail=7292000 print_time=2941.475 buffer_time=2.369 print_stall=0 extruder: target=240 temp=239.9 pwm=0.514
Stats 791408.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3454420 bytes_read=1119947 bytes_retransmit=9 bytes_invalid=0 send_seq=79452 receive_seq=79452 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=80 temp=79.9 pwm=0.376 sd_pos=741935 sysload=1.02 cputime=152.889 memavail=7292096 print_time=2942.110 buffer_time=2.003 print_stall=0 extruder: target=240 temp=240.0 pwm=0.514
Stats 791409.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3456072 bytes_read=1120415 bytes_retransmit=9 bytes_invalid=0 send_seq=79487 receive_seq=79487 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=80 temp=79.9 pwm=0.464 sd_pos=742050 sysload=1.10 cputime=152.943 memavail=7292096 print_time=2943.364 buffer_time=2.257 print_stall=0 extruder: target=240 temp=240.2 pwm=0.397
Stats 791410.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3457709 bytes_read=1120888 bytes_retransmit=9 bytes_invalid=0 send_seq=79523 receive_seq=79523 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=79.9 pwm=0.407 sd_pos=742165 sysload=1.10 cputime=153.004 memavail=7292096 print_time=2944.618 buffer_time=2.510 print_stall=0 extruder: target=240 temp=240.1 pwm=0.454
Stats 791411.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3458629 bytes_read=1121295 bytes_retransmit=9 bytes_invalid=0 send_seq=79546 receive_seq=79546 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=79.9 pwm=0.407 sd_pos=742224 sysload=1.10 cputime=153.056 memavail=7292096 print_time=2945.238 buffer_time=2.129 print_stall=0 extruder: target=240 temp=240.0 pwm=0.495
Stats 791412.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3460317 bytes_read=1121753 bytes_retransmit=9 bytes_invalid=0 send_seq=79582 receive_seq=79582 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=79.9 pwm=0.406 sd_pos=742338 sysload=1.10 cputime=153.116 memavail=7292096 print_time=2946.492 buffer_time=2.383 print_stall=0 extruder: target=240 temp=240.1 pwm=0.495
Stats 791413.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3461222 bytes_read=1122166 bytes_retransmit=9 bytes_invalid=0 send_seq=79606 receive_seq=79606 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=79.8 pwm=0.463 sd_pos=742394 sysload=1.10 cputime=153.171 memavail=7292096 print_time=2947.127 buffer_time=2.017 print_stall=0 extruder: target=240 temp=239.9 pwm=0.549
Stats 791414.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3462907 bytes_read=1122663 bytes_retransmit=9 bytes_invalid=0 send_seq=79644 receive_seq=79644 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=79.8 pwm=0.537 sd_pos=742510 sysload=1.01 cputime=153.235 memavail=7291848 print_time=2948.381 buffer_time=2.271 print_stall=0 extruder: target=240 temp=240.1 pwm=0.471
Stats 791415.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3464553 bytes_read=1123116 bytes_retransmit=9 bytes_invalid=0 send_seq=79679 receive_seq=79679 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119992824 heater_bed: target=80 temp=79.8 pwm=0.440 sd_pos=742637 sysload=1.01 cputime=153.289 memavail=7291848 print_time=2949.635 buffer_time=2.525 print_stall=0 extruder: target=240 temp=239.9 pwm=0.562
Stats 791416.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3465507 bytes_read=1123539 bytes_retransmit=9 bytes_invalid=0 send_seq=79705 receive_seq=79705 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=79.8 pwm=0.416 sd_pos=742696 sysload=1.01 cputime=153.342 memavail=7291848 print_time=2950.255 buffer_time=2.144 print_stall=0 extruder: target=240 temp=240.1 pwm=0.447
Stats 791417.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3467173 bytes_read=1124016 bytes_retransmit=9 bytes_invalid=0 send_seq=79742 receive_seq=79742 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=79.8 pwm=0.476 sd_pos=742824 sysload=1.01 cputime=153.412 memavail=7291400 print_time=2951.509 buffer_time=2.397 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 791418.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3468089 bytes_read=1124409 bytes_retransmit=9 bytes_invalid=0 send_seq=79765 receive_seq=79765 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=80 temp=79.8 pwm=0.481 sd_pos=742881 sysload=1.01 cputime=153.463 memavail=7291400 print_time=2952.144 buffer_time=2.031 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 791419.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3469717 bytes_read=1124887 bytes_retransmit=9 bytes_invalid=0 send_seq=79799 receive_seq=79799 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=79.8 pwm=0.412 sd_pos=742996 sysload=0.93 cputime=153.523 memavail=7291652 print_time=2953.398 buffer_time=2.285 print_stall=0 extruder: target=240 temp=240.0 pwm=0.545
Stats 791420.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3471372 bytes_read=1125369 bytes_retransmit=9 bytes_invalid=0 send_seq=79837 receive_seq=79837 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=79.8 pwm=0.512 sd_pos=743112 sysload=0.93 cputime=153.579 memavail=7291652 print_time=2954.652 buffer_time=2.538 print_stall=0 extruder: target=240 temp=239.9 pwm=0.536
Stats 791421.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3472314 bytes_read=1125772 bytes_retransmit=9 bytes_invalid=0 send_seq=79862 receive_seq=79862 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=79.8 pwm=0.456 sd_pos=743183 sysload=0.93 cputime=153.641 memavail=7291652 print_time=2955.272 buffer_time=2.156 print_stall=0 extruder: target=240 temp=240.0 pwm=0.490
Stats 791422.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3473916 bytes_read=1126235 bytes_retransmit=9 bytes_invalid=0 send_seq=79896 receive_seq=79896 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119992866 heater_bed: target=80 temp=79.8 pwm=0.387 sd_pos=743311 sysload=0.93 cputime=153.709 memavail=7291652 print_time=2956.526 buffer_time=2.409 print_stall=0 extruder: target=240 temp=239.9 pwm=0.561
Stats 791423.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3474970 bytes_read=1126677 bytes_retransmit=9 bytes_invalid=0 send_seq=79926 receive_seq=79926 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992860 heater_bed: target=80 temp=79.7 pwm=0.494 sd_pos=743370 sysload=0.93 cputime=153.777 memavail=7291428 print_time=2957.161 buffer_time=2.042 print_stall=0 extruder: target=240 temp=239.9 pwm=0.558
Stats 791424.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3476602 bytes_read=1127150 bytes_retransmit=9 bytes_invalid=0 send_seq=79962 receive_seq=79962 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=80 temp=79.7 pwm=0.494 sd_pos=743488 sysload=0.85 cputime=153.853 memavail=7291056 print_time=2958.415 buffer_time=2.290 print_stall=0 extruder: target=240 temp=240.2 pwm=0.393
Stats 791425.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3478252 bytes_read=1127628 bytes_retransmit=9 bytes_invalid=0 send_seq=79999 receive_seq=79999 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=79.8 pwm=0.341 sd_pos=743606 sysload=0.85 cputime=153.931 memavail=7292916 print_time=2959.669 buffer_time=2.544 print_stall=0 extruder: target=240 temp=239.9 pwm=0.536
Stats 791426.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3479236 bytes_read=1128065 bytes_retransmit=9 bytes_invalid=0 send_seq=80028 receive_seq=80028 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=79.8 pwm=0.383 sd_pos=743665 sysload=0.85 cputime=154.002 memavail=7292916 print_time=2960.289 buffer_time=2.163 print_stall=0 extruder: target=240 temp=240.0 pwm=0.506
Stats 791427.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3480865 bytes_read=1128528 bytes_retransmit=9 bytes_invalid=0 send_seq=80065 receive_seq=80065 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992886 heater_bed: target=80 temp=79.8 pwm=0.393 sd_pos=743783 sysload=0.85 cputime=154.066 memavail=7293212 print_time=2961.543 buffer_time=2.417 print_stall=0 extruder: target=240 temp=240.0 pwm=0.506
Stats 791428.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3481874 bytes_read=1128951 bytes_retransmit=9 bytes_invalid=0 send_seq=80091 receive_seq=80091 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992872 heater_bed: target=80 temp=79.8 pwm=0.460 sd_pos=743842 sysload=0.85 cputime=154.125 memavail=7293388 print_time=2962.178 buffer_time=2.051 print_stall=0 extruder: target=240 temp=240.0 pwm=0.497
Stats 791429.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3483571 bytes_read=1129443 bytes_retransmit=9 bytes_invalid=0 send_seq=80128 receive_seq=80128 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=79.8 pwm=0.395 sd_pos=743960 sysload=0.79 cputime=154.197 memavail=7293388 print_time=2963.432 buffer_time=2.305 print_stall=0 extruder: target=240 temp=240.2 pwm=0.399
Stats 791430.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3485175 bytes_read=1129901 bytes_retransmit=9 bytes_invalid=0 send_seq=80164 receive_seq=80164 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992850 heater_bed: target=80 temp=79.8 pwm=0.431 sd_pos=744078 sysload=0.79 cputime=154.257 memavail=7293164 print_time=2964.683 buffer_time=2.555 print_stall=0 extruder: target=240 temp=240.1 pwm=0.486
Stats 791431.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3486136 bytes_read=1130324 bytes_retransmit=9 bytes_invalid=0 send_seq=80190 receive_seq=80190 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992841 heater_bed: target=80 temp=79.7 pwm=0.495 sd_pos=744166 sysload=0.79 cputime=154.313 memavail=7293164 print_time=2965.301 buffer_time=2.172 print_stall=0 extruder: target=240 temp=240.1 pwm=0.481
Stats 791432.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3487799 bytes_read=1130806 bytes_retransmit=9 bytes_invalid=0 send_seq=80228 receive_seq=80228 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=79.7 pwm=0.442 sd_pos=744284 sysload=0.79 cputime=154.368 memavail=7293164 print_time=2966.541 buffer_time=2.413 print_stall=0 extruder: target=240 temp=239.9 pwm=0.572
Stats 791433.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3488762 bytes_read=1131209 bytes_retransmit=9 bytes_invalid=0 send_seq=80253 receive_seq=80253 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=80 temp=79.7 pwm=0.442 sd_pos=744343 sysload=0.79 cputime=154.418 memavail=7293164 print_time=2967.162 buffer_time=2.032 print_stall=0 extruder: target=240 temp=239.9 pwm=0.575
Stats 791434.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3490486 bytes_read=1131707 bytes_retransmit=9 bytes_invalid=0 send_seq=80291 receive_seq=80291 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=79.8 pwm=0.387 sd_pos=744461 sysload=0.72 cputime=154.480 memavail=7293164 print_time=2968.380 buffer_time=2.249 print_stall=0 extruder: target=240 temp=240.1 pwm=0.474
Stats 791435.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3492168 bytes_read=1132184 bytes_retransmit=9 bytes_invalid=0 send_seq=80328 receive_seq=80328 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=79.7 pwm=0.495 sd_pos=744578 sysload=0.72 cputime=154.551 memavail=7293164 print_time=2969.579 buffer_time=2.447 print_stall=0 extruder: target=240 temp=240.2 pwm=0.402
Stats 791436.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3493045 bytes_read=1132587 bytes_retransmit=9 bytes_invalid=0 send_seq=80353 receive_seq=80353 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=79.7 pwm=0.432 sd_pos=744637 sysload=0.72 cputime=154.608 memavail=7293164 print_time=2970.166 buffer_time=2.033 print_stall=0 extruder: target=240 temp=240.0 pwm=0.509
Stats 791437.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3494717 bytes_read=1133075 bytes_retransmit=9 bytes_invalid=0 send_seq=80392 receive_seq=80392 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=79.8 pwm=0.407 sd_pos=744754 sysload=0.72 cputime=154.671 memavail=7293164 print_time=2971.328 buffer_time=2.194 print_stall=0 extruder: target=240 temp=240.2 pwm=0.456
Stats 791438.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3496366 bytes_read=1133555 bytes_retransmit=9 bytes_invalid=0 send_seq=80430 receive_seq=80430 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=79.8 pwm=0.390 sd_pos=744842 sysload=0.72 cputime=154.733 memavail=7293164 print_time=2972.212 buffer_time=2.077 print_stall=0 extruder: target=240 temp=239.9 pwm=0.567
Stats 791439.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3498058 bytes_read=1134021 bytes_retransmit=9 bytes_invalid=0 send_seq=80466 receive_seq=80466 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=79.8 pwm=0.461 sd_pos=744986 sysload=0.66 cputime=154.798 memavail=7292940 print_time=2973.565 buffer_time=2.429 print_stall=0 extruder: target=240 temp=240.1 pwm=0.505
Stats 791440.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3499715 bytes_read=1134492 bytes_retransmit=9 bytes_invalid=0 send_seq=80503 receive_seq=80503 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=79.8 pwm=0.459 sd_pos=745104 sysload=0.66 cputime=154.869 memavail=7292940 print_time=2974.633 buffer_time=2.497 print_stall=0 extruder: target=240 temp=239.9 pwm=0.581
Stats 791441.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3500758 bytes_read=1134923 bytes_retransmit=9 bytes_invalid=0 send_seq=80531 receive_seq=80531 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=79.8 pwm=0.394 sd_pos=745160 sysload=0.66 cputime=154.922 memavail=7292940 print_time=2975.156 buffer_time=2.019 print_stall=0 extruder: target=240 temp=239.9 pwm=0.574
Stats 791442.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3502371 bytes_read=1135371 bytes_retransmit=9 bytes_invalid=0 send_seq=80565 receive_seq=80565 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=79.8 pwm=0.394 sd_pos=745306 sysload=0.66 cputime=154.982 memavail=7292940 print_time=2976.173 buffer_time=2.035 print_stall=0 extruder: target=240 temp=239.9 pwm=0.574
Stats 791443.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3503981 bytes_read=1135839 bytes_retransmit=9 bytes_invalid=0 send_seq=80600 receive_seq=80600 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=79.8 pwm=0.448 sd_pos=745435 sysload=0.66 cputime=155.050 memavail=7292940 print_time=2977.163 buffer_time=2.025 print_stall=0 extruder: target=240 temp=240.1 pwm=0.470
Stats 791444.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3506223 bytes_read=1136376 bytes_retransmit=9 bytes_invalid=0 send_seq=80646 receive_seq=80646 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=79.8 pwm=0.392 sd_pos=745610 sysload=0.69 cputime=155.115 memavail=7292444 print_time=2978.609 buffer_time=2.470 print_stall=0 extruder: target=240 temp=240.1 pwm=0.529
Stats 791445.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3507811 bytes_read=1136829 bytes_retransmit=9 bytes_invalid=0 send_seq=80681 receive_seq=80681 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=79.8 pwm=0.470 sd_pos=745728 sysload=0.69 cputime=155.174 memavail=7292444 print_time=2979.554 buffer_time=2.415 print_stall=0 extruder: target=240 temp=240.1 pwm=0.504
Stats 791446.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3509356 bytes_read=1137292 bytes_retransmit=9 bytes_invalid=0 send_seq=80715 receive_seq=80715 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=79.8 pwm=0.399 sd_pos=745858 sysload=0.69 cputime=155.233 memavail=7292444 print_time=2980.486 buffer_time=2.346 print_stall=0 extruder: target=240 temp=240.2 pwm=0.427
Stats 791447.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3511047 bytes_read=1137769 bytes_retransmit=9 bytes_invalid=0 send_seq=80752 receive_seq=80752 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=79.8 pwm=0.452 sd_pos=746034 sysload=0.69 cputime=155.291 memavail=7292444 print_time=2981.416 buffer_time=2.276 print_stall=0 extruder: target=240 temp=240.1 pwm=0.466
Stats 791448.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3512646 bytes_read=1138217 bytes_retransmit=9 bytes_invalid=0 send_seq=80786 receive_seq=80786 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=79.8 pwm=0.376 sd_pos=746151 sysload=0.69 cputime=155.349 memavail=7292444 print_time=2982.332 buffer_time=2.192 print_stall=0 extruder: target=240 temp=240.0 pwm=0.520
Stats 791449.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3514313 bytes_read=1138715 bytes_retransmit=9 bytes_invalid=0 send_seq=80824 receive_seq=80824 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=79.9 pwm=0.383 sd_pos=746269 sysload=0.64 cputime=155.412 memavail=7292444 print_time=2983.253 buffer_time=2.112 print_stall=0 extruder: target=240 temp=239.7 pwm=0.618
Stats 791450.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3515883 bytes_read=1139182 bytes_retransmit=9 bytes_invalid=0 send_seq=80859 receive_seq=80859 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=79.9 pwm=0.383 sd_pos=746386 sysload=0.64 cputime=155.468 memavail=7292444 print_time=2984.174 buffer_time=2.032 print_stall=0 extruder: target=240 temp=240.1 pwm=0.419
Stats 791451.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3518186 bytes_read=1139706 bytes_retransmit=9 bytes_invalid=0 send_seq=80906 receive_seq=80906 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=79.9 pwm=0.383 sd_pos=746562 sysload=0.64 cputime=155.534 memavail=7292444 print_time=2985.555 buffer_time=2.413 print_stall=0 extruder: target=240 temp=240.1 pwm=0.493
Stats 791452.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3519744 bytes_read=1140164 bytes_retransmit=9 bytes_invalid=0 send_seq=80939 receive_seq=80939 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=79.9 pwm=0.383 sd_pos=746679 sysload=0.64 cputime=155.589 memavail=7292444 print_time=2986.476 buffer_time=2.333 print_stall=0 extruder: target=240 temp=240.1 pwm=0.493
Stats 791453.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3521345 bytes_read=1140636 bytes_retransmit=9 bytes_invalid=0 send_seq=80975 receive_seq=80975 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992825 heater_bed: target=80 temp=79.9 pwm=0.384 sd_pos=746796 sysload=0.64 cputime=155.653 memavail=7292444 print_time=2987.397 buffer_time=2.253 print_stall=0 extruder: target=240 temp=240.0 pwm=0.562
Stats 791454.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3522953 bytes_read=1141109 bytes_retransmit=9 bytes_invalid=0 send_seq=81011 receive_seq=81011 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992816 heater_bed: target=80 temp=80.0 pwm=0.331 sd_pos=746913 sysload=0.58 cputime=155.706 memavail=7292196 print_time=2988.317 buffer_time=2.173 print_stall=0 extruder: target=240 temp=239.9 pwm=0.551
Stats 791455.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3524551 bytes_read=1141577 bytes_retransmit=9 bytes_invalid=0 send_seq=81046 receive_seq=81046 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=80.0 pwm=0.331 sd_pos=747031 sysload=0.58 cputime=155.767 memavail=7291972 print_time=2989.238 buffer_time=2.092 print_stall=0 extruder: target=240 temp=239.9 pwm=0.507
Stats 791456.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3526076 bytes_read=1142039 bytes_retransmit=9 bytes_invalid=0 send_seq=81080 receive_seq=81080 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=747148 sysload=0.58 cputime=155.829 memavail=7291972 print_time=2990.159 buffer_time=2.012 print_stall=0 extruder: target=240 temp=240.1 pwm=0.452
Stats 791457.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3527692 bytes_read=1142492 bytes_retransmit=9 bytes_invalid=0 send_seq=81115 receive_seq=81115 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.0 pwm=0.281 sd_pos=747296 sysload=0.58 cputime=155.894 memavail=7291972 print_time=2991.079 buffer_time=1.933 print_stall=0 extruder: target=240 temp=240.1 pwm=0.523
Stats 791458.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3529985 bytes_read=1143020 bytes_retransmit=9 bytes_invalid=0 send_seq=81162 receive_seq=81162 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992873 heater_bed: target=80 temp=80.1 pwm=0.287 sd_pos=747443 sysload=0.58 cputime=155.948 memavail=7291940 print_time=2992.460 buffer_time=2.313 print_stall=0 extruder: target=240 temp=240.1 pwm=0.513
Stats 791459.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3531523 bytes_read=1143497 bytes_retransmit=9 bytes_invalid=0 send_seq=81196 receive_seq=81196 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=80.1 pwm=0.338 sd_pos=747561 sysload=0.54 cputime=155.982 memavail=7291940 print_time=2993.381 buffer_time=2.233 print_stall=0 extruder: target=240 temp=240.2 pwm=0.501
Stats 791460.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3533080 bytes_read=1143950 bytes_retransmit=9 bytes_invalid=0 send_seq=81231 receive_seq=81231 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=80.1 pwm=0.395 sd_pos=747679 sysload=0.54 cputime=156.028 memavail=7291940 print_time=2994.302 buffer_time=2.152 print_stall=0 extruder: target=240 temp=239.8 pwm=0.604
Stats 791461.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3534648 bytes_read=1144423 bytes_retransmit=9 bytes_invalid=0 send_seq=81267 receive_seq=81267 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.1 pwm=0.354 sd_pos=747797 sysload=0.54 cputime=156.096 memavail=7291940 print_time=2995.222 buffer_time=2.073 print_stall=0 extruder: target=240 temp=239.8 pwm=0.625
Stats 791462.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3536861 bytes_read=1144950 bytes_retransmit=9 bytes_invalid=0 send_seq=81314 receive_seq=81314 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=80.1 pwm=0.430 sd_pos=747974 sysload=0.54 cputime=156.148 memavail=7291940 print_time=2996.603 buffer_time=2.453 print_stall=0 extruder: target=240 temp=240.0 pwm=0.477
Stats 791463.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3538369 bytes_read=1145393 bytes_retransmit=9 bytes_invalid=0 send_seq=81347 receive_seq=81347 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992816 heater_bed: target=80 temp=80.1 pwm=0.370 sd_pos=748092 sysload=0.54 cputime=156.207 memavail=7291940 print_time=2997.524 buffer_time=2.373 print_stall=0 extruder: target=240 temp=239.8 pwm=0.544
Stats 791464.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3539890 bytes_read=1145876 bytes_retransmit=9 bytes_invalid=0 send_seq=81382 receive_seq=81382 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.1 pwm=0.292 sd_pos=748210 sysload=0.49 cputime=156.265 memavail=7292700 print_time=2998.445 buffer_time=2.293 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 791465.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3541436 bytes_read=1146343 bytes_retransmit=9 bytes_invalid=0 send_seq=81417 receive_seq=81417 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992883 heater_bed: target=80 temp=80.1 pwm=0.322 sd_pos=748328 sysload=0.49 cputime=156.324 memavail=7292700 print_time=2999.365 buffer_time=2.213 print_stall=0 extruder: target=240 temp=239.9 pwm=0.536
Stats 791466.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3542937 bytes_read=1146786 bytes_retransmit=9 bytes_invalid=0 send_seq=81450 receive_seq=81450 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992878 heater_bed: target=80 temp=80.1 pwm=0.309 sd_pos=748445 sysload=0.49 cputime=156.378 memavail=7292700 print_time=3000.286 buffer_time=2.133 print_stall=0 extruder: target=240 temp=240.1 pwm=0.428
Stats 791467.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3544416 bytes_read=1147244 bytes_retransmit=9 bytes_invalid=0 send_seq=81483 receive_seq=81483 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992869 heater_bed: target=80 temp=80.2 pwm=0.309 sd_pos=748562 sysload=0.49 cputime=156.432 memavail=7292700 print_time=3001.207 buffer_time=2.052 print_stall=0 extruder: target=240 temp=240.0 pwm=0.526
Stats 791468.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3546978 bytes_read=1147781 bytes_retransmit=9 bytes_invalid=0 send_seq=81532 receive_seq=81532 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992864 heater_bed: target=80 temp=80.2 pwm=0.360 sd_pos=749305 sysload=0.49 cputime=156.503 memavail=7292700 print_time=3002.333 buffer_time=2.177 print_stall=0 extruder: target=240 temp=240.0 pwm=0.526
Stats 791469.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3548879 bytes_read=1148279 bytes_retransmit=9 bytes_invalid=0 send_seq=81573 receive_seq=81573 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.2 pwm=0.362 sd_pos=749465 sysload=0.53 cputime=156.564 memavail=7292700 print_time=3003.514 buffer_time=2.358 print_stall=0 extruder: target=240 temp=239.9 pwm=0.526
Stats 791470.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3549365 bytes_read=1148652 bytes_retransmit=9 bytes_invalid=0 send_seq=81589 receive_seq=81589 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=80.2 pwm=0.264 sd_pos=749492 sysload=0.53 cputime=156.617 memavail=7292700 print_time=3004.730 buffer_time=2.573 print_stall=0 extruder: target=240 temp=239.8 pwm=0.526
Stats 791471.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3550079 bytes_read=1149054 bytes_retransmit=9 bytes_invalid=0 send_seq=81611 receive_seq=81611 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992888 heater_bed: target=80 temp=80.2 pwm=0.319 sd_pos=749642 sysload=0.53 cputime=156.678 memavail=7292700 print_time=3006.316 buffer_time=3.159 print_stall=0 extruder: target=240 temp=239.9 pwm=0.479
Stats 791472.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3550236 bytes_read=1149387 bytes_retransmit=9 bytes_invalid=0 send_seq=81622 receive_seq=81622 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992877 heater_bed: target=80 temp=80.2 pwm=0.319 sd_pos=749642 sysload=0.53 cputime=156.723 memavail=7292700 print_time=3006.316 buffer_time=2.159 print_stall=0 extruder: target=240 temp=240.1 pwm=0.412
Stats 791473.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3551198 bytes_read=1149824 bytes_retransmit=9 bytes_invalid=0 send_seq=81648 receive_seq=81648 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=80.2 pwm=0.263 sd_pos=749782 sysload=0.53 cputime=156.783 memavail=7292708 print_time=3008.009 buffer_time=2.851 print_stall=0 extruder: target=240 temp=240.2 pwm=0.428
Stats 791474.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3551656 bytes_read=1150198 bytes_retransmit=9 bytes_invalid=0 send_seq=81665 receive_seq=81665 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.2 pwm=0.335 sd_pos=749837 sysload=0.57 cputime=156.834 memavail=7292736 print_time=3008.416 buffer_time=2.257 print_stall=0 extruder: target=240 temp=239.8 pwm=0.616
Stats 791475.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3552345 bytes_read=1150564 bytes_retransmit=9 bytes_invalid=0 send_seq=81684 receive_seq=81684 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=80.2 pwm=0.335 sd_pos=749972 sysload=0.57 cputime=156.889 memavail=7292736 print_time=3009.766 buffer_time=2.607 print_stall=0 extruder: target=240 temp=240.1 pwm=0.490
Stats 791476.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3554083 bytes_read=1151059 bytes_retransmit=9 bytes_invalid=0 send_seq=81723 receive_seq=81723 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992842 heater_bed: target=80 temp=80.2 pwm=0.342 sd_pos=750153 sysload=0.57 cputime=156.948 memavail=7292736 print_time=3010.243 buffer_time=2.083 print_stall=0 extruder: target=240 temp=240.1 pwm=0.465
Stats 791477.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3555993 bytes_read=1151537 bytes_retransmit=9 bytes_invalid=0 send_seq=81763 receive_seq=81763 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.2 pwm=0.342 sd_pos=750708 sysload=0.57 cputime=157.012 memavail=7292768 print_time=3011.314 buffer_time=2.153 print_stall=0 extruder: target=240 temp=240.4 pwm=0.333
Stats 791478.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=3557874 bytes_read=1152010 bytes_retransmit=9 bytes_invalid=0 send_seq=81802 receive_seq=81802 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=80.3 pwm=0.259 sd_pos=751264 sysload=0.57 cputime=157.086 memavail=7292768 print_time=3012.414 buffer_time=2.251 print_stall=0 extruder: target=240 temp=240.2 pwm=0.444
Stats 791479.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3559981 bytes_read=1152547 bytes_retransmit=9 bytes_invalid=0 send_seq=81845 receive_seq=81845 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=80.3 pwm=0.297 sd_pos=751894 sysload=0.53 cputime=157.158 memavail=7292768 print_time=3013.224 buffer_time=2.061 print_stall=0 extruder: target=240 temp=240.4 pwm=0.444
Stats 791480.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3560932 bytes_read=1152940 bytes_retransmit=9 bytes_invalid=0 send_seq=81868 receive_seq=81868 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=80.2 pwm=0.350 sd_pos=751978 sysload=0.53 cputime=157.219 memavail=7292768 print_time=3014.832 buffer_time=2.668 print_stall=0 extruder: target=240 temp=240.3 pwm=0.444
Stats 791481.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3561629 bytes_read=1153328 bytes_retransmit=9 bytes_invalid=0 send_seq=81890 receive_seq=81890 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.2 pwm=0.351 sd_pos=752116 sysload=0.53 cputime=157.277 memavail=7292768 print_time=3016.418 buffer_time=3.253 print_stall=0 extruder: target=240 temp=239.9 pwm=0.620
Stats 791482.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3561871 bytes_read=1153720 bytes_retransmit=9 bytes_invalid=0 send_seq=81907 receive_seq=81907 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.2 pwm=0.301 sd_pos=752116 sysload=0.53 cputime=157.330 memavail=7292768 print_time=3016.418 buffer_time=2.252 print_stall=0 extruder: target=240 temp=239.9 pwm=0.536
Stats 791483.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3562845 bytes_read=1154128 bytes_retransmit=9 bytes_invalid=0 send_seq=81933 receive_seq=81933 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.2 pwm=0.369 sd_pos=752281 sysload=0.53 cputime=157.383 memavail=7292768 print_time=3018.111 buffer_time=2.944 print_stall=0 extruder: target=240 temp=240.1 pwm=0.471
Stats 791484.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3563277 bytes_read=1154506 bytes_retransmit=9 bytes_invalid=0 send_seq=81950 receive_seq=81950 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.2 pwm=0.311 sd_pos=752364 sysload=0.48 cputime=157.437 memavail=7292296 print_time=3018.520 buffer_time=2.352 print_stall=0 extruder: target=240 temp=240.1 pwm=0.445
Stats 791485.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3565149 bytes_read=1155013 bytes_retransmit=9 bytes_invalid=0 send_seq=81990 receive_seq=81990 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.2 pwm=0.361 sd_pos=752556 sysload=0.48 cputime=157.496 memavail=7292296 print_time=3020.232 buffer_time=3.063 print_stall=0 extruder: target=240 temp=240.2 pwm=0.411
Stats 791486.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3565311 bytes_read=1155351 bytes_retransmit=9 bytes_invalid=0 send_seq=82002 receive_seq=82002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.2 pwm=0.361 sd_pos=752556 sysload=0.48 cputime=157.543 memavail=7292296 print_time=3020.232 buffer_time=2.062 print_stall=0 extruder: target=240 temp=240.4 pwm=0.411
Stats 791487.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3566640 bytes_read=1155779 bytes_retransmit=9 bytes_invalid=0 send_seq=82032 receive_seq=82032 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.2 pwm=0.361 sd_pos=752917 sysload=0.48 cputime=157.604 memavail=7292296 print_time=3021.110 buffer_time=1.940 print_stall=0 extruder: target=240 temp=239.9 pwm=0.601
Stats 791488.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3568631 bytes_read=1156291 bytes_retransmit=9 bytes_invalid=0 send_seq=82073 receive_seq=82073 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.1 pwm=0.453 sd_pos=753499 sysload=0.48 cputime=157.669 memavail=7293692 print_time=3022.417 buffer_time=2.246 print_stall=0 extruder: target=240 temp=239.9 pwm=0.529
Stats 791489.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3571148 bytes_read=1156829 bytes_retransmit=9 bytes_invalid=0 send_seq=82122 receive_seq=82122 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=80.1 pwm=0.453 sd_pos=754286 sysload=0.44 cputime=157.737 memavail=7292184 print_time=3023.558 buffer_time=2.387 print_stall=0 extruder: target=240 temp=240.0 pwm=0.462
Stats 791490.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3572232 bytes_read=1157237 bytes_retransmit=9 bytes_invalid=0 send_seq=82148 receive_seq=82148 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.1 pwm=0.494 sd_pos=754371 sysload=0.44 cputime=157.797 memavail=7297068 print_time=3025.166 buffer_time=2.995 print_stall=0 extruder: target=240 temp=239.8 pwm=0.553
Stats 791491.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3572631 bytes_read=1157634 bytes_retransmit=9 bytes_invalid=0 send_seq=82166 receive_seq=82166 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.1 pwm=0.460 sd_pos=754399 sysload=0.44 cputime=157.849 memavail=7295304 print_time=3025.503 buffer_time=2.330 print_stall=0 extruder: target=240 temp=239.9 pwm=0.496
Stats 791492.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3573171 bytes_read=1157992 bytes_retransmit=9 bytes_invalid=0 send_seq=82182 receive_seq=82182 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=80 temp=80.1 pwm=0.385 sd_pos=754537 sysload=0.44 cputime=157.902 memavail=7295304 print_time=3026.752 buffer_time=2.579 print_stall=0 extruder: target=240 temp=240.1 pwm=0.397
Stats 791493.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3574125 bytes_read=1158395 bytes_retransmit=9 bytes_invalid=0 send_seq=82207 receive_seq=82207 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.1 pwm=0.402 sd_pos=754678 sysload=0.44 cputime=157.960 memavail=7294816 print_time=3028.445 buffer_time=3.270 print_stall=0 extruder: target=240 temp=240.0 pwm=0.464
Stats 791494.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3574351 bytes_read=1158792 bytes_retransmit=9 bytes_invalid=0 send_seq=82222 receive_seq=82222 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.1 pwm=0.368 sd_pos=754678 sysload=0.49 cputime=158.010 memavail=7293308 print_time=3028.445 buffer_time=2.270 print_stall=0 extruder: target=240 temp=239.9 pwm=0.520
Stats 791495.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3576496 bytes_read=1159290 bytes_retransmit=9 bytes_invalid=0 send_seq=82266 receive_seq=82266 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.1 pwm=0.368 sd_pos=754954 sysload=0.49 cputime=158.069 memavail=7293308 print_time=3030.559 buffer_time=3.384 print_stall=0 extruder: target=240 temp=239.8 pwm=0.573
Stats 791496.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3576669 bytes_read=1159628 bytes_retransmit=9 bytes_invalid=0 send_seq=82278 receive_seq=82278 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.1 pwm=0.247 sd_pos=754954 sysload=0.49 cputime=158.120 memavail=7293308 print_time=3030.559 buffer_time=2.384 print_stall=0 extruder: target=240 temp=240.0 pwm=0.484
Stats 791497.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3577704 bytes_read=1160070 bytes_retransmit=9 bytes_invalid=0 send_seq=82305 receive_seq=82305 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.1 pwm=0.312 sd_pos=755233 sysload=0.49 cputime=158.183 memavail=7293308 print_time=3031.367 buffer_time=2.191 print_stall=0 extruder: target=240 temp=240.0 pwm=0.460
Stats 791498.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3579292 bytes_read=1160523 bytes_retransmit=9 bytes_invalid=0 send_seq=82340 receive_seq=82340 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.1 pwm=0.377 sd_pos=755731 sysload=0.49 cputime=158.253 memavail=7293560 print_time=3032.283 buffer_time=2.106 print_stall=0 extruder: target=240 temp=239.9 pwm=0.532
Stats 791499.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3582313 bytes_read=1161111 bytes_retransmit=9 bytes_invalid=0 send_seq=82396 receive_seq=82396 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.1 pwm=0.377 sd_pos=756833 sysload=0.45 cputime=158.329 memavail=7295712 print_time=3033.742 buffer_time=2.564 print_stall=0 extruder: target=240 temp=240.0 pwm=0.467
Stats 791500.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3583323 bytes_read=1161528 bytes_retransmit=9 bytes_invalid=0 send_seq=82421 receive_seq=82421 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=80.1 pwm=0.377 sd_pos=756930 sysload=0.45 cputime=158.388 memavail=7295712 print_time=3035.350 buffer_time=3.172 print_stall=0 extruder: target=240 temp=240.3 pwm=0.361
Stats 791501.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3583525 bytes_read=1161876 bytes_retransmit=9 bytes_invalid=0 send_seq=82435 receive_seq=82435 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.1 pwm=0.377 sd_pos=756930 sysload=0.45 cputime=158.437 memavail=7295208 print_time=3035.350 buffer_time=2.171 print_stall=0 extruder: target=240 temp=240.0 pwm=0.561
Stats 791502.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3584245 bytes_read=1162274 bytes_retransmit=9 bytes_invalid=0 send_seq=82456 receive_seq=82456 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=757068 sysload=0.45 cputime=158.495 memavail=7295208 print_time=3036.936 buffer_time=2.756 print_stall=0 extruder: target=240 temp=240.0 pwm=0.516
Stats 791503.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3584861 bytes_read=1162661 bytes_retransmit=9 bytes_invalid=0 send_seq=82475 receive_seq=82475 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=757152 sysload=0.45 cputime=158.549 memavail=7294204 print_time=3037.349 buffer_time=2.169 print_stall=0 extruder: target=240 temp=240.0 pwm=0.459
Stats 791504.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3585373 bytes_read=1163049 bytes_retransmit=9 bytes_invalid=0 send_seq=82494 receive_seq=82494 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=757221 sysload=0.41 cputime=158.595 memavail=7292972 print_time=3038.628 buffer_time=2.448 print_stall=0 extruder: target=240 temp=240.0 pwm=0.460
Stats 791505.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3587370 bytes_read=1163547 bytes_retransmit=9 bytes_invalid=0 send_seq=82535 receive_seq=82535 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.350 sd_pos=757495 sysload=0.41 cputime=158.649 memavail=7292972 print_time=3040.739 buffer_time=3.557 print_stall=0 extruder: target=240 temp=240.0 pwm=0.460
Stats 791506.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3587620 bytes_read=1163909 bytes_retransmit=9 bytes_invalid=0 send_seq=82549 receive_seq=82549 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=80.0 pwm=0.350 sd_pos=757495 sysload=0.41 cputime=158.701 memavail=7292972 print_time=3040.739 buffer_time=2.556 print_stall=0 extruder: target=240 temp=240.1 pwm=0.462
Stats 791507.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3588507 bytes_read=1164307 bytes_retransmit=9 bytes_invalid=0 send_seq=82573 receive_seq=82573 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=757743 sysload=0.41 cputime=158.750 memavail=7292972 print_time=3041.558 buffer_time=2.375 print_stall=0 extruder: target=240 temp=240.1 pwm=0.443
Stats 791508.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3589808 bytes_read=1164750 bytes_retransmit=9 bytes_invalid=0 send_seq=82603 receive_seq=82603 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.0 pwm=0.349 sd_pos=758155 sysload=0.41 cputime=158.811 memavail=7292972 print_time=3042.343 buffer_time=2.159 print_stall=0 extruder: target=240 temp=240.1 pwm=0.422
Stats 791509.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3591632 bytes_read=1165252 bytes_retransmit=9 bytes_invalid=0 send_seq=82642 receive_seq=82642 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=759182 sysload=0.38 cputime=158.879 memavail=7292972 print_time=3043.388 buffer_time=2.203 print_stall=0 extruder: target=240 temp=239.9 pwm=0.532
Stats 791510.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3593686 bytes_read=1165739 bytes_retransmit=9 bytes_invalid=0 send_seq=82685 receive_seq=82685 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=80.0 pwm=0.348 sd_pos=759349 sysload=0.38 cputime=158.930 memavail=7292748 print_time=3044.248 buffer_time=2.063 print_stall=0 extruder: target=240 temp=240.1 pwm=0.435
Stats 791511.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3594206 bytes_read=1166114 bytes_retransmit=9 bytes_invalid=0 send_seq=82703 receive_seq=82703 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=759377 sysload=0.38 cputime=158.974 memavail=7292748 print_time=3045.465 buffer_time=2.279 print_stall=0 extruder: target=240 temp=240.1 pwm=0.413
Stats 791512.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3595010 bytes_read=1166533 bytes_retransmit=9 bytes_invalid=0 send_seq=82727 receive_seq=82727 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.379 sd_pos=759543 sysload=0.38 cputime=159.029 memavail=7292748 print_time=3047.050 buffer_time=2.865 print_stall=0 extruder: target=240 temp=239.8 pwm=0.576
Stats 791513.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3595670 bytes_read=1166916 bytes_retransmit=9 bytes_invalid=0 send_seq=82748 receive_seq=82748 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.0 pwm=0.319 sd_pos=759627 sysload=0.38 cputime=159.076 memavail=7293004 print_time=3047.463 buffer_time=2.276 print_stall=0 extruder: target=240 temp=240.0 pwm=0.447
Stats 791514.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3596149 bytes_read=1167304 bytes_retransmit=9 bytes_invalid=0 send_seq=82764 receive_seq=82764 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=759684 sysload=0.35 cputime=159.117 memavail=7295692 print_time=3048.743 buffer_time=2.555 print_stall=0 extruder: target=240 temp=240.1 pwm=0.390
Stats 791515.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3598266 bytes_read=1167826 bytes_retransmit=9 bytes_invalid=0 send_seq=82810 receive_seq=82810 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.336 sd_pos=759958 sysload=0.35 cputime=159.174 memavail=7294952 print_time=3050.852 buffer_time=3.664 print_stall=0 extruder: target=240 temp=240.1 pwm=0.468
Stats 791516.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3598507 bytes_read=1168169 bytes_retransmit=9 bytes_invalid=0 send_seq=82823 receive_seq=82823 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=759958 sysload=0.35 cputime=159.219 memavail=7294700 print_time=3050.852 buffer_time=2.664 print_stall=0 extruder: target=240 temp=240.2 pwm=0.439
Stats 791517.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3599324 bytes_read=1168567 bytes_retransmit=9 bytes_invalid=0 send_seq=82844 receive_seq=82844 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=760124 sysload=0.35 cputime=159.281 memavail=7293900 print_time=3051.198 buffer_time=2.009 print_stall=0 extruder: target=240 temp=240.1 pwm=0.492
Stats 791518.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3601081 bytes_read=1169044 bytes_retransmit=9 bytes_invalid=0 send_seq=82881 receive_seq=82881 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=760647 sysload=0.35 cputime=159.345 memavail=7294004 print_time=3052.367 buffer_time=2.178 print_stall=0 extruder: target=240 temp=240.0 pwm=0.492
Stats 791519.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3602789 bytes_read=1169522 bytes_retransmit=9 bytes_invalid=0 send_seq=82918 receive_seq=82918 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.0 pwm=0.336 sd_pos=761197 sysload=0.40 cputime=159.408 memavail=7296640 print_time=3053.250 buffer_time=2.059 print_stall=0 extruder: target=240 temp=239.9 pwm=0.519
Stats 791520.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3605276 bytes_read=1170055 bytes_retransmit=9 bytes_invalid=0 send_seq=82966 receive_seq=82966 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.0 pwm=0.393 sd_pos=761794 sysload=0.40 cputime=159.470 memavail=7296640 print_time=3054.405 buffer_time=2.214 print_stall=0 extruder: target=240 temp=239.9 pwm=0.508
Stats 791521.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3605782 bytes_read=1170442 bytes_retransmit=9 bytes_invalid=0 send_seq=82985 receive_seq=82985 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=761822 sysload=0.40 cputime=159.525 memavail=7296640 print_time=3055.621 buffer_time=2.430 print_stall=0 extruder: target=240 temp=239.8 pwm=0.552
Stats 791522.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3606526 bytes_read=1170825 bytes_retransmit=9 bytes_invalid=0 send_seq=83006 receive_seq=83006 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=761985 sysload=0.40 cputime=159.585 memavail=7295884 print_time=3057.207 buffer_time=3.015 print_stall=0 extruder: target=240 temp=240.0 pwm=0.479
Stats 791523.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3606683 bytes_read=1171173 bytes_retransmit=9 bytes_invalid=0 send_seq=83017 receive_seq=83017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=80.0 pwm=0.317 sd_pos=761985 sysload=0.40 cputime=159.632 memavail=7295380 print_time=3057.207 buffer_time=2.015 print_stall=0 extruder: target=240 temp=240.2 pwm=0.368
Stats 791524.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3607670 bytes_read=1171615 bytes_retransmit=9 bytes_invalid=0 send_seq=83044 receive_seq=83044 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.342 sd_pos=762125 sysload=0.45 cputime=159.691 memavail=7294628 print_time=3058.899 buffer_time=2.707 print_stall=0 extruder: target=240 temp=240.1 pwm=0.450
Stats 791525.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3608088 bytes_read=1171968 bytes_retransmit=9 bytes_invalid=0 send_seq=83059 receive_seq=83059 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=79.9 pwm=0.443 sd_pos=762180 sysload=0.45 cputime=159.739 memavail=7294388 print_time=3059.306 buffer_time=2.113 print_stall=0 extruder: target=240 temp=240.1 pwm=0.450
Stats 791526.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3610063 bytes_read=1172471 bytes_retransmit=9 bytes_invalid=0 send_seq=83101 receive_seq=83101 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=79.9 pwm=0.365 sd_pos=762430 sysload=0.45 cputime=159.799 memavail=7294388 print_time=3061.070 buffer_time=2.876 print_stall=0 extruder: target=240 temp=240.1 pwm=0.450
Stats 791527.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3610934 bytes_read=1172888 bytes_retransmit=9 bytes_invalid=0 send_seq=83126 receive_seq=83126 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=79.9 pwm=0.427 sd_pos=762596 sysload=0.45 cputime=159.862 memavail=7294388 print_time=3061.422 buffer_time=2.228 print_stall=0 extruder: target=240 temp=240.0 pwm=0.492
Stats 791528.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3612558 bytes_read=1173341 bytes_retransmit=9 bytes_invalid=0 send_seq=83161 receive_seq=83161 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=79.9 pwm=0.427 sd_pos=763036 sysload=0.45 cputime=159.918 memavail=7294388 print_time=3062.272 buffer_time=2.077 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 791529.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3615234 bytes_read=1173909 bytes_retransmit=9 bytes_invalid=0 send_seq=83213 receive_seq=83213 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992806 heater_bed: target=80 temp=79.9 pwm=0.427 sd_pos=763655 sysload=0.41 cputime=159.993 memavail=7297896 print_time=3063.758 buffer_time=2.563 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 791530.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3616232 bytes_read=1174331 bytes_retransmit=9 bytes_invalid=0 send_seq=83239 receive_seq=83239 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=79.9 pwm=0.410 sd_pos=764203 sysload=0.41 cputime=160.062 memavail=7297696 print_time=3064.341 buffer_time=2.146 print_stall=0 extruder: target=240 temp=239.9 pwm=0.527
Stats 791531.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3618405 bytes_read=1174834 bytes_retransmit=9 bytes_invalid=0 send_seq=83284 receive_seq=83284 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=80 temp=79.9 pwm=0.360 sd_pos=764382 sysload=0.41 cputime=160.132 memavail=7297696 print_time=3065.198 buffer_time=2.002 print_stall=0 extruder: target=240 temp=240.2 pwm=0.399
Stats 791532.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3618897 bytes_read=1175217 bytes_retransmit=9 bytes_invalid=0 send_seq=83302 receive_seq=83302 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=79.9 pwm=0.407 sd_pos=764410 sysload=0.41 cputime=160.187 memavail=7297696 print_time=3066.414 buffer_time=2.217 print_stall=0 extruder: target=240 temp=240.1 pwm=0.475
Stats 791533.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3619547 bytes_read=1175604 bytes_retransmit=9 bytes_invalid=0 send_seq=83321 receive_seq=83321 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=79.9 pwm=0.407 sd_pos=764494 sysload=0.41 cputime=160.250 memavail=7297700 print_time=3067.339 buffer_time=2.140 print_stall=0 extruder: target=240 temp=240.2 pwm=0.406
Stats 791534.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3620367 bytes_read=1176017 bytes_retransmit=9 bytes_invalid=0 send_seq=83345 receive_seq=83345 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=79.9 pwm=0.407 sd_pos=764714 sysload=0.38 cputime=160.329 memavail=7297208 print_time=3068.413 buffer_time=2.213 print_stall=0 extruder: target=240 temp=240.1 pwm=0.450
Stats 791535.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3620876 bytes_read=1176400 bytes_retransmit=9 bytes_invalid=0 send_seq=83363 receive_seq=83363 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=79.9 pwm=0.386 sd_pos=764770 sysload=0.38 cputime=160.389 memavail=7297208 print_time=3069.692 buffer_time=2.491 print_stall=0 extruder: target=240 temp=239.9 pwm=0.514
Stats 791536.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3621649 bytes_read=1176807 bytes_retransmit=9 bytes_invalid=0 send_seq=83386 receive_seq=83386 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=79.9 pwm=0.435 sd_pos=764910 sysload=0.38 cputime=160.454 memavail=7297208 print_time=3070.726 buffer_time=2.524 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 791537.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3623044 bytes_read=1177240 bytes_retransmit=9 bytes_invalid=0 send_seq=83417 receive_seq=83417 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=79.9 pwm=0.382 sd_pos=765129 sysload=0.38 cputime=160.513 memavail=7296984 print_time=3071.684 buffer_time=2.480 print_stall=0 extruder: target=240 temp=240.1 pwm=0.453
Stats 791538.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3624350 bytes_read=1177688 bytes_retransmit=9 bytes_invalid=0 send_seq=83448 receive_seq=83448 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=79.9 pwm=0.334 sd_pos=765401 sysload=0.38 cputime=160.564 memavail=7296984 print_time=3072.377 buffer_time=2.171 print_stall=0 extruder: target=240 temp=240.3 pwm=0.387
Stats 791539.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3626297 bytes_read=1178205 bytes_retransmit=9 bytes_invalid=0 send_seq=83490 receive_seq=83490 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=79.9 pwm=0.497 sd_pos=765950 sysload=0.35 cputime=160.616 memavail=7296732 print_time=3073.472 buffer_time=2.266 print_stall=0 extruder: target=240 temp=239.9 pwm=0.498
Stats 791540.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3627992 bytes_read=1178668 bytes_retransmit=9 bytes_invalid=0 send_seq=83527 receive_seq=83527 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=79.9 pwm=0.346 sd_pos=766591 sysload=0.35 cputime=160.689 memavail=7296732 print_time=3074.316 buffer_time=2.109 print_stall=0 extruder: target=240 temp=239.8 pwm=0.553
Stats 791541.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3630323 bytes_read=1179201 bytes_retransmit=9 bytes_invalid=0 send_seq=83575 receive_seq=83575 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=79.9 pwm=0.403 sd_pos=766931 sysload=0.35 cputime=160.758 memavail=7296736 print_time=3076.392 buffer_time=3.184 print_stall=0 extruder: target=240 temp=240.0 pwm=0.416
Stats 791542.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3630541 bytes_read=1179553 bytes_retransmit=9 bytes_invalid=0 send_seq=83587 receive_seq=83587 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=79.9 pwm=0.403 sd_pos=766931 sysload=0.35 cputime=160.815 memavail=7296232 print_time=3076.392 buffer_time=2.182 print_stall=0 extruder: target=240 temp=240.0 pwm=0.494
Stats 791543.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3631236 bytes_read=1179931 bytes_retransmit=9 bytes_invalid=0 send_seq=83607 receive_seq=83607 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=79.9 pwm=0.403 sd_pos=767015 sysload=0.35 cputime=160.879 memavail=7296232 print_time=3077.315 buffer_time=2.105 print_stall=0 extruder: target=240 temp=240.2 pwm=0.426
Stats 791544.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3632086 bytes_read=1180354 bytes_retransmit=9 bytes_invalid=0 send_seq=83630 receive_seq=83630 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=79.9 pwm=0.365 sd_pos=767235 sysload=0.32 cputime=160.936 memavail=7296232 print_time=3078.390 buffer_time=2.179 print_stall=0 extruder: target=240 temp=240.3 pwm=0.426
Stats 791545.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3632560 bytes_read=1180731 bytes_retransmit=9 bytes_invalid=0 send_seq=83647 receive_seq=83647 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=79.9 pwm=0.416 sd_pos=767314 sysload=0.32 cputime=160.998 memavail=7296448 print_time=3079.670 buffer_time=2.457 print_stall=0 extruder: target=240 temp=240.1 pwm=0.510
Stats 791546.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3633222 bytes_read=1181102 bytes_retransmit=9 bytes_invalid=0 send_seq=83667 receive_seq=83667 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=79.9 pwm=0.416 sd_pos=767424 sysload=0.32 cputime=161.052 memavail=7295960 print_time=3080.484 buffer_time=2.271 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 791547.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3634763 bytes_read=1181557 bytes_retransmit=9 bytes_invalid=0 send_seq=83701 receive_seq=83701 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=79.9 pwm=0.471 sd_pos=767673 sysload=0.32 cputime=161.108 memavail=7295960 print_time=3081.674 buffer_time=2.460 print_stall=0 extruder: target=240 temp=239.9 pwm=0.534
Stats 791548.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3635960 bytes_read=1181997 bytes_retransmit=9 bytes_invalid=0 send_seq=83731 receive_seq=83731 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=79.9 pwm=0.471 sd_pos=767953 sysload=0.32 cputime=161.164 memavail=7295720 print_time=3082.338 buffer_time=2.124 print_stall=0 extruder: target=240 temp=240.0 pwm=0.446
Stats 791549.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3637940 bytes_read=1182495 bytes_retransmit=9 bytes_invalid=0 send_seq=83772 receive_seq=83772 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=80 temp=79.9 pwm=0.419 sd_pos=768566 sysload=0.30 cputime=161.226 memavail=7295232 print_time=3083.468 buffer_time=2.253 print_stall=0 extruder: target=240 temp=239.8 pwm=0.522
Stats 791550.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3639501 bytes_read=1182963 bytes_retransmit=9 bytes_invalid=0 send_seq=83807 receive_seq=83807 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=79.9 pwm=0.419 sd_pos=769247 sysload=0.30 cputime=161.299 memavail=7295232 print_time=3084.326 buffer_time=2.111 print_stall=0 extruder: target=240 temp=239.8 pwm=0.540
Stats 791551.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3641906 bytes_read=1183495 bytes_retransmit=9 bytes_invalid=0 send_seq=83855 receive_seq=83855 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=79.9 pwm=0.371 sd_pos=769587 sysload=0.30 cputime=161.362 memavail=7295232 print_time=3086.403 buffer_time=3.185 print_stall=0 extruder: target=240 temp=240.1 pwm=0.443
Stats 791552.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3642146 bytes_read=1183833 bytes_retransmit=9 bytes_invalid=0 send_seq=83867 receive_seq=83867 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=79.8 pwm=0.494 sd_pos=769587 sysload=0.30 cputime=161.414 memavail=7294744 print_time=3086.403 buffer_time=2.184 print_stall=0 extruder: target=240 temp=240.1 pwm=0.443
Stats 791553.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3642914 bytes_read=1184236 bytes_retransmit=9 bytes_invalid=0 send_seq=83889 receive_seq=83889 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=79.8 pwm=0.558 sd_pos=769727 sysload=0.30 cputime=161.477 memavail=7295484 print_time=3087.325 buffer_time=2.106 print_stall=0 extruder: target=240 temp=240.2 pwm=0.382
Stats 791554.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3643783 bytes_read=1184663 bytes_retransmit=9 bytes_invalid=0 send_seq=83913 receive_seq=83913 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=79.7 pwm=0.639 sd_pos=769947 sysload=0.27 cputime=161.543 memavail=7296940 print_time=3088.402 buffer_time=2.181 print_stall=0 extruder: target=240 temp=240.2 pwm=0.417
Stats 791555.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3644263 bytes_read=1185021 bytes_retransmit=9 bytes_invalid=0 send_seq=83929 receive_seq=83929 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=79.6 pwm=0.833 sd_pos=770004 sysload=0.27 cputime=161.606 memavail=7296940 print_time=3089.681 buffer_time=2.460 print_stall=0 extruder: target=240 temp=240.1 pwm=0.491
Stats 791556.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3644973 bytes_read=1185424 bytes_retransmit=9 bytes_invalid=0 send_seq=83951 receive_seq=83951 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=79.5 pwm=0.743 sd_pos=770170 sysload=0.27 cputime=161.675 memavail=7296940 print_time=3090.583 buffer_time=2.361 print_stall=0 extruder: target=240 temp=240.1 pwm=0.416
Stats 791557.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3646563 bytes_read=1185896 bytes_retransmit=9 bytes_invalid=0 send_seq=83987 receive_seq=83987 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=79.6 pwm=0.488 sd_pos=770446 sysload=0.27 cputime=161.751 memavail=7296940 print_time=3091.688 buffer_time=2.466 print_stall=0 extruder: target=240 temp=240.2 pwm=0.393
Stats 791558.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3648387 bytes_read=1186364 bytes_retransmit=9 bytes_invalid=0 send_seq=84025 receive_seq=84025 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=79.6 pwm=0.389 sd_pos=770957 sysload=0.27 cputime=161.822 memavail=7296940 print_time=3092.624 buffer_time=2.401 print_stall=0 extruder: target=240 temp=240.1 pwm=0.447
Stats 791559.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3650329 bytes_read=1186887 bytes_retransmit=9 bytes_invalid=0 send_seq=84068 receive_seq=84068 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=79.7 pwm=0.223 sd_pos=771623 sysload=0.41 cputime=161.898 memavail=7296940 print_time=3093.750 buffer_time=2.526 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 791560.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3652257 bytes_read=1187384 bytes_retransmit=9 bytes_invalid=0 send_seq=84109 receive_seq=84109 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=79.8 pwm=0.223 sd_pos=772212 sysload=0.41 cputime=161.964 memavail=7296940 print_time=3094.499 buffer_time=2.274 print_stall=0 extruder: target=240 temp=239.9 pwm=0.533
Stats 791561.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3653238 bytes_read=1187782 bytes_retransmit=9 bytes_invalid=0 send_seq=84133 receive_seq=84133 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=79.8 pwm=0.223 sd_pos=772308 sysload=0.41 cputime=162.020 memavail=7296436 print_time=3096.107 buffer_time=2.882 print_stall=0 extruder: target=240 temp=240.0 pwm=0.482
Stats 791562.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3653938 bytes_read=1188190 bytes_retransmit=9 bytes_invalid=0 send_seq=84156 receive_seq=84156 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=79.9 pwm=0.288 sd_pos=772391 sysload=0.41 cputime=162.076 memavail=7296436 print_time=3096.887 buffer_time=2.661 print_stall=0 extruder: target=240 temp=240.1 pwm=0.427
Stats 791563.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3654413 bytes_read=1188567 bytes_retransmit=9 bytes_invalid=0 send_seq=84173 receive_seq=84173 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=79.9 pwm=0.372 sd_pos=772583 sysload=0.41 cputime=162.138 memavail=7295948 print_time=3097.693 buffer_time=2.467 print_stall=0 extruder: target=240 temp=240.2 pwm=0.432
Stats 791564.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3655358 bytes_read=1188980 bytes_retransmit=9 bytes_invalid=0 send_seq=84197 receive_seq=84197 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=79.9 pwm=0.372 sd_pos=772724 sysload=0.46 cputime=162.200 memavail=7295732 print_time=3099.386 buffer_time=3.158 print_stall=0 extruder: target=240 temp=240.0 pwm=0.485
Stats 791565.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3655547 bytes_read=1189333 bytes_retransmit=9 bytes_invalid=0 send_seq=84209 receive_seq=84209 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=79.9 pwm=0.372 sd_pos=772724 sysload=0.46 cputime=162.250 memavail=7294976 print_time=3099.386 buffer_time=2.158 print_stall=0 extruder: target=240 temp=240.0 pwm=0.463
Stats 791566.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3656282 bytes_read=1189740 bytes_retransmit=9 bytes_invalid=0 send_seq=84232 receive_seq=84232 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=772862 sysload=0.46 cputime=162.306 memavail=7294976 print_time=3100.275 buffer_time=2.046 print_stall=0 extruder: target=240 temp=240.1 pwm=0.426
Stats 791567.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3657916 bytes_read=1190198 bytes_retransmit=9 bytes_invalid=0 send_seq=84268 receive_seq=84268 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=773163 sysload=0.46 cputime=162.370 memavail=7294976 print_time=3101.424 buffer_time=2.195 print_stall=0 extruder: target=240 temp=240.3 pwm=0.317
Stats 791568.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3659770 bytes_read=1190691 bytes_retransmit=9 bytes_invalid=0 send_seq=84308 receive_seq=84308 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=79.9 pwm=0.387 sd_pos=773609 sysload=0.46 cputime=162.434 memavail=7294976 print_time=3102.334 buffer_time=2.105 print_stall=0 extruder: target=240 temp=240.2 pwm=0.430
Stats 791569.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3661752 bytes_read=1191203 bytes_retransmit=9 bytes_invalid=0 send_seq=84349 receive_seq=84349 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=79.9 pwm=0.475 sd_pos=774217 sysload=0.66 cputime=162.503 memavail=7294976 print_time=3103.429 buffer_time=2.198 print_stall=0 extruder: target=240 temp=240.1 pwm=0.435
Stats 791570.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3664159 bytes_read=1191726 bytes_retransmit=9 bytes_invalid=0 send_seq=84398 receive_seq=84398 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=79.9 pwm=0.418 sd_pos=774871 sysload=0.66 cputime=162.579 memavail=7294736 print_time=3104.581 buffer_time=2.349 print_stall=0 extruder: target=240 temp=239.9 pwm=0.515
Stats 791571.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3664701 bytes_read=1192119 bytes_retransmit=9 bytes_invalid=0 send_seq=84418 receive_seq=84418 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=79.9 pwm=0.481 sd_pos=774899 sysload=0.66 cputime=162.632 memavail=7294736 print_time=3105.797 buffer_time=2.564 print_stall=0 extruder: target=240 temp=239.7 pwm=0.556
Stats 791572.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3665417 bytes_read=1192526 bytes_retransmit=9 bytes_invalid=0 send_seq=84441 receive_seq=84441 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=79.9 pwm=0.539 sd_pos=774983 sysload=0.66 cputime=162.691 memavail=7294232 print_time=3106.579 buffer_time=2.344 print_stall=0 extruder: target=240 temp=239.8 pwm=0.456
Stats 791573.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3665954 bytes_read=1192900 bytes_retransmit=9 bytes_invalid=0 send_seq=84458 receive_seq=84458 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=79.9 pwm=0.414 sd_pos=775284 sysload=0.66 cputime=162.746 memavail=7293980 print_time=3107.383 buffer_time=2.149 print_stall=0 extruder: target=240 temp=240.3 pwm=0.344
Stats 791574.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3666945 bytes_read=1193338 bytes_retransmit=9 bytes_invalid=0 send_seq=84484 receive_seq=84484 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992816 heater_bed: target=80 temp=79.9 pwm=0.453 sd_pos=775420 sysload=0.69 cputime=162.806 memavail=7297180 print_time=3109.073 buffer_time=2.838 print_stall=0 extruder: target=240 temp=240.0 pwm=0.505
Stats 791575.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3667382 bytes_read=1193710 bytes_retransmit=9 bytes_invalid=0 send_seq=84500 receive_seq=84500 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992862 heater_bed: target=80 temp=79.9 pwm=0.453 sd_pos=775476 sysload=0.69 cputime=162.862 memavail=7296048 print_time=3109.479 buffer_time=2.242 print_stall=0 extruder: target=240 temp=240.0 pwm=0.524
Stats 791576.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3668245 bytes_read=1194108 bytes_retransmit=9 bytes_invalid=0 send_seq=84524 receive_seq=84524 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=79.9 pwm=0.458 sd_pos=775778 sysload=0.69 cputime=162.916 memavail=7295796 print_time=3110.780 buffer_time=2.543 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 791577.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3669829 bytes_read=1194581 bytes_retransmit=9 bytes_invalid=0 send_seq=84560 receive_seq=84560 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=79.9 pwm=0.406 sd_pos=775975 sysload=0.69 cputime=162.973 memavail=7294768 print_time=3111.163 buffer_time=1.925 print_stall=0 extruder: target=240 temp=239.9 pwm=0.519
Stats 791578.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3672092 bytes_read=1195103 bytes_retransmit=9 bytes_invalid=0 send_seq=84606 receive_seq=84606 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=80 temp=79.9 pwm=0.438 sd_pos=776607 sysload=0.69 cputime=163.039 memavail=7294768 print_time=3112.409 buffer_time=2.171 print_stall=0 extruder: target=240 temp=240.0 pwm=0.495
Stats 791579.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3673770 bytes_read=1195576 bytes_retransmit=9 bytes_invalid=0 send_seq=84642 receive_seq=84642 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=79.9 pwm=0.386 sd_pos=777076 sysload=0.63 cputime=163.089 memavail=7294768 print_time=3113.782 buffer_time=2.543 print_stall=0 extruder: target=240 temp=239.8 pwm=0.570
Stats 791580.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3675530 bytes_read=1196074 bytes_retransmit=9 bytes_invalid=0 send_seq=84683 receive_seq=84683 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=79.9 pwm=0.372 sd_pos=777593 sysload=0.63 cputime=163.154 memavail=7297784 print_time=3114.343 buffer_time=2.104 print_stall=0 extruder: target=240 temp=239.8 pwm=0.556
Stats 791581.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3676557 bytes_read=1196499 bytes_retransmit=9 bytes_invalid=0 send_seq=84710 receive_seq=84710 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=79.9 pwm=0.395 sd_pos=777678 sysload=0.63 cputime=163.203 memavail=7297680 print_time=3115.951 buffer_time=2.711 print_stall=0 extruder: target=240 temp=240.3 pwm=0.320
Stats 791582.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3677267 bytes_read=1196875 bytes_retransmit=9 bytes_invalid=0 send_seq=84731 receive_seq=84731 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992816 heater_bed: target=80 temp=79.9 pwm=0.397 sd_pos=777790 sysload=0.63 cputime=163.258 memavail=7297440 print_time=3116.735 buffer_time=2.494 print_stall=0 extruder: target=240 temp=240.3 pwm=0.415
Stats 791583.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3677811 bytes_read=1197250 bytes_retransmit=9 bytes_invalid=0 send_seq=84749 receive_seq=84749 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=80 temp=79.9 pwm=0.469 sd_pos=778064 sysload=0.63 cputime=163.317 memavail=7296436 print_time=3117.537 buffer_time=2.295 print_stall=0 extruder: target=240 temp=240.3 pwm=0.396
Stats 791584.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3678756 bytes_read=1197677 bytes_retransmit=9 bytes_invalid=0 send_seq=84773 receive_seq=84773 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=79.9 pwm=0.469 sd_pos=778204 sysload=0.74 cputime=163.371 memavail=7296184 print_time=3119.231 buffer_time=2.988 print_stall=0 extruder: target=240 temp=239.9 pwm=0.522
Stats 791585.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3679149 bytes_read=1198030 bytes_retransmit=9 bytes_invalid=0 send_seq=84788 receive_seq=84788 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992846 heater_bed: target=80 temp=79.9 pwm=0.469 sd_pos=778260 sysload=0.74 cputime=163.419 memavail=7296188 print_time=3119.637 buffer_time=2.393 print_stall=0 extruder: target=240 temp=239.9 pwm=0.522
Stats 791586.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3679713 bytes_read=1198413 bytes_retransmit=9 bytes_invalid=0 send_seq=84806 receive_seq=84806 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=79.9 pwm=0.354 sd_pos=778427 sysload=0.74 cputime=163.474 memavail=7295700 print_time=3120.305 buffer_time=2.061 print_stall=0 extruder: target=240 temp=239.9 pwm=0.453
Stats 791587.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3681617 bytes_read=1198905 bytes_retransmit=9 bytes_invalid=0 send_seq=84846 receive_seq=84846 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=79.9 pwm=0.376 sd_pos=778769 sysload=0.74 cputime=163.545 memavail=7295700 print_time=3121.410 buffer_time=2.165 print_stall=0 extruder: target=240 temp=240.1 pwm=0.394
Stats 791588.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3683767 bytes_read=1199403 bytes_retransmit=9 bytes_invalid=0 send_seq=84890 receive_seq=84890 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992828 heater_bed: target=80 temp=79.9 pwm=0.431 sd_pos=779544 sysload=0.74 cputime=163.614 memavail=7299160 print_time=3122.475 buffer_time=2.230 print_stall=0 extruder: target=240 temp=240.1 pwm=0.458
Stats 791589.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3685517 bytes_read=1199896 bytes_retransmit=9 bytes_invalid=0 send_seq=84927 receive_seq=84927 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=79.9 pwm=0.500 sd_pos=780130 sysload=0.84 cputime=163.684 memavail=7298688 print_time=3123.779 buffer_time=2.533 print_stall=0 extruder: target=240 temp=240.1 pwm=0.455
Stats 791590.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3687058 bytes_read=1200363 bytes_retransmit=9 bytes_invalid=0 send_seq=84962 receive_seq=84962 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=79.9 pwm=0.435 sd_pos=780642 sysload=0.84 cputime=163.753 memavail=7298692 print_time=3124.311 buffer_time=2.064 print_stall=0 extruder: target=240 temp=239.9 pwm=0.574
Stats 791591.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3688002 bytes_read=1200761 bytes_retransmit=9 bytes_invalid=0 send_seq=84986 receive_seq=84986 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=79.9 pwm=0.435 sd_pos=780725 sysload=0.84 cputime=163.799 memavail=7298692 print_time=3125.401 buffer_time=2.155 print_stall=0 extruder: target=240 temp=240.1 pwm=0.483
Stats 791592.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3688807 bytes_read=1201169 bytes_retransmit=9 bytes_invalid=0 send_seq=85009 receive_seq=85009 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=79.9 pwm=0.426 sd_pos=780863 sysload=0.84 cputime=163.863 memavail=7298440 print_time=3126.704 buffer_time=2.456 print_stall=0 extruder: target=240 temp=240.2 pwm=0.370
Stats 791593.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3689366 bytes_read=1201556 bytes_retransmit=9 bytes_invalid=0 send_seq=85028 receive_seq=85028 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=79.9 pwm=0.406 sd_pos=781109 sysload=0.84 cputime=163.926 memavail=7298440 print_time=3127.505 buffer_time=2.257 print_stall=0 extruder: target=240 temp=239.9 pwm=0.524
Stats 791594.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3690470 bytes_read=1201989 bytes_retransmit=9 bytes_invalid=0 send_seq=85056 receive_seq=85056 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=79.9 pwm=0.473 sd_pos=781274 sysload=0.78 cputime=163.988 memavail=7297432 print_time=3129.198 buffer_time=2.949 print_stall=0 extruder: target=240 temp=240.1 pwm=0.419
Stats 791595.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3690935 bytes_read=1202377 bytes_retransmit=9 bytes_invalid=0 send_seq=85075 receive_seq=85075 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=79.9 pwm=0.437 sd_pos=781330 sysload=0.78 cputime=164.036 memavail=7297432 print_time=3129.604 buffer_time=2.355 print_stall=0 extruder: target=240 temp=240.0 pwm=0.488
Stats 791596.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3691477 bytes_read=1202754 bytes_retransmit=9 bytes_invalid=0 send_seq=85092 receive_seq=85092 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=79.9 pwm=0.437 sd_pos=781497 sysload=0.78 cputime=164.088 memavail=7297208 print_time=3130.273 buffer_time=2.024 print_stall=0 extruder: target=240 temp=240.2 pwm=0.419
Stats 791597.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3693896 bytes_read=1203282 bytes_retransmit=9 bytes_invalid=0 send_seq=85142 receive_seq=85142 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992858 heater_bed: target=80 temp=79.9 pwm=0.449 sd_pos=781968 sysload=0.78 cputime=164.157 memavail=7295756 print_time=3131.628 buffer_time=2.377 print_stall=0 extruder: target=240 temp=240.0 pwm=0.496
Stats 791598.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3695240 bytes_read=1203725 bytes_retransmit=9 bytes_invalid=0 send_seq=85172 receive_seq=85172 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=79.9 pwm=0.389 sd_pos=782471 sysload=0.78 cputime=164.216 memavail=7295756 print_time=3132.350 buffer_time=2.099 print_stall=0 extruder: target=240 temp=239.8 pwm=0.575
Stats 791599.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3696663 bytes_read=1204192 bytes_retransmit=9 bytes_invalid=0 send_seq=85204 receive_seq=85204 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992839 heater_bed: target=80 temp=79.9 pwm=0.452 sd_pos=782972 sysload=0.71 cputime=164.275 memavail=7295756 print_time=3133.638 buffer_time=2.386 print_stall=0 extruder: target=240 temp=239.8 pwm=0.553
Stats 791600.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3698878 bytes_read=1204705 bytes_retransmit=9 bytes_invalid=0 send_seq=85251 receive_seq=85251 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=79.9 pwm=0.376 sd_pos=783573 sysload=0.71 cputime=164.343 memavail=7295756 print_time=3135.212 buffer_time=2.958 print_stall=0 extruder: target=240 temp=240.0 pwm=0.393
Stats 791601.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3699152 bytes_read=1205068 bytes_retransmit=9 bytes_invalid=0 send_seq=85265 receive_seq=85265 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=79.9 pwm=0.418 sd_pos=783629 sysload=0.71 cputime=164.395 memavail=7295252 print_time=3135.797 buffer_time=2.543 print_stall=0 extruder: target=240 temp=240.2 pwm=0.393
Stats 791602.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3699933 bytes_read=1205470 bytes_retransmit=9 bytes_invalid=0 send_seq=85287 receive_seq=85287 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=79.9 pwm=0.426 sd_pos=783740 sysload=0.71 cputime=164.446 memavail=7294760 print_time=3136.603 buffer_time=2.348 print_stall=0 extruder: target=240 temp=240.3 pwm=0.344
Stats 791603.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3700429 bytes_read=1205828 bytes_retransmit=9 bytes_invalid=0 send_seq=85303 receive_seq=85303 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=79.9 pwm=0.499 sd_pos=783987 sysload=0.71 cputime=164.497 memavail=7294760 print_time=3137.384 buffer_time=2.128 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 791604.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3701537 bytes_read=1206276 bytes_retransmit=9 bytes_invalid=0 send_seq=85331 receive_seq=85331 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=79.9 pwm=0.509 sd_pos=784179 sysload=0.74 cputime=164.558 memavail=7294284 print_time=3139.082 buffer_time=2.825 print_stall=0 extruder: target=240 temp=239.9 pwm=0.483
Stats 791605.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3702176 bytes_read=1206673 bytes_retransmit=9 bytes_invalid=0 send_seq=85352 receive_seq=85352 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=79.9 pwm=0.444 sd_pos=784289 sysload=0.74 cputime=164.603 memavail=7294284 print_time=3139.600 buffer_time=2.342 print_stall=0 extruder: target=240 temp=240.0 pwm=0.422
Stats 791606.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3702774 bytes_read=1207036 bytes_retransmit=9 bytes_invalid=0 send_seq=85369 receive_seq=85369 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=79.9 pwm=0.444 sd_pos=784586 sysload=0.74 cputime=164.661 memavail=7294284 print_time=3140.760 buffer_time=2.502 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 791607.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3704940 bytes_read=1207558 bytes_retransmit=9 bytes_invalid=0 send_seq=85412 receive_seq=85412 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=79.9 pwm=0.512 sd_pos=784944 sysload=0.74 cputime=164.732 memavail=7294684 print_time=3141.511 buffer_time=2.252 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 791608.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3706457 bytes_read=1208001 bytes_retransmit=9 bytes_invalid=0 send_seq=85445 receive_seq=85445 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=80 temp=79.9 pwm=0.452 sd_pos=785524 sysload=0.74 cputime=164.798 memavail=7294284 print_time=3142.296 buffer_time=2.037 print_stall=0 extruder: target=240 temp=239.9 pwm=0.505
Stats 791609.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3708051 bytes_read=1208464 bytes_retransmit=9 bytes_invalid=0 send_seq=85479 receive_seq=85479 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=80 temp=79.9 pwm=0.468 sd_pos=786080 sysload=0.68 cputime=164.856 memavail=7294284 print_time=3143.492 buffer_time=2.233 print_stall=0 extruder: target=240 temp=240.1 pwm=0.437
Stats 791610.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3710270 bytes_read=1209001 bytes_retransmit=9 bytes_invalid=0 send_seq=85525 receive_seq=85525 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=79.9 pwm=0.468 sd_pos=786695 sysload=0.68 cputime=164.906 memavail=7294284 print_time=3145.099 buffer_time=2.839 print_stall=0 extruder: target=240 temp=240.1 pwm=0.485
Stats 791611.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3710573 bytes_read=1209354 bytes_retransmit=9 bytes_invalid=0 send_seq=85540 receive_seq=85540 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=79.9 pwm=0.556 sd_pos=786751 sysload=0.68 cputime=164.949 memavail=7294284 print_time=3145.663 buffer_time=2.402 print_stall=0 extruder: target=240 temp=240.1 pwm=0.414
Stats 791612.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3711280 bytes_read=1209742 bytes_retransmit=9 bytes_invalid=0 send_seq=85562 receive_seq=85562 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=79.9 pwm=0.469 sd_pos=786834 sysload=0.68 cputime=164.987 memavail=7294044 print_time=3146.400 buffer_time=2.140 print_stall=0 extruder: target=240 temp=240.2 pwm=0.414
Stats 791613.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3712286 bytes_read=1210164 bytes_retransmit=9 bytes_invalid=0 send_seq=85585 receive_seq=85585 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=79.9 pwm=0.391 sd_pos=787219 sysload=0.68 cputime=165.045 memavail=7294044 print_time=3147.664 buffer_time=2.403 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 791614.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3712859 bytes_read=1210552 bytes_retransmit=9 bytes_invalid=0 send_seq=85604 receive_seq=85604 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=79.9 pwm=0.472 sd_pos=787303 sysload=0.62 cputime=165.090 memavail=7293292 print_time=3148.350 buffer_time=2.088 print_stall=0 extruder: target=240 temp=240.0 pwm=0.495
Stats 791615.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3713646 bytes_read=1210935 bytes_retransmit=9 bytes_invalid=0 send_seq=85625 receive_seq=85625 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992841 heater_bed: target=80 temp=79.9 pwm=0.401 sd_pos=787496 sysload=0.62 cputime=165.147 memavail=7293292 print_time=3149.469 buffer_time=2.206 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 791616.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3714217 bytes_read=1211332 bytes_retransmit=9 bytes_invalid=0 send_seq=85643 receive_seq=85643 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=79.9 pwm=0.463 sd_pos=787758 sysload=0.62 cputime=165.208 memavail=7293292 print_time=3150.377 buffer_time=2.114 print_stall=0 extruder: target=240 temp=240.2 pwm=0.347
Stats 791617.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3716558 bytes_read=1211852 bytes_retransmit=9 bytes_invalid=0 send_seq=85692 receive_seq=85692 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=79.9 pwm=0.428 sd_pos=788115 sysload=0.62 cputime=165.271 memavail=7296980 print_time=3151.393 buffer_time=2.129 print_stall=0 extruder: target=240 temp=240.1 pwm=0.408
Stats 791618.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3717766 bytes_read=1212268 bytes_retransmit=9 bytes_invalid=0 send_seq=85721 receive_seq=85721 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992824 heater_bed: target=80 temp=79.9 pwm=0.448 sd_pos=788405 sysload=0.62 cputime=165.328 memavail=7296056 print_time=3152.304 buffer_time=2.039 print_stall=0 extruder: target=240 temp=239.9 pwm=0.510
Stats 791619.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3719498 bytes_read=1212773 bytes_retransmit=9 bytes_invalid=0 send_seq=85759 receive_seq=85759 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=79.9 pwm=0.448 sd_pos=789016 sysload=0.57 cputime=165.391 memavail=7296056 print_time=3153.361 buffer_time=2.096 print_stall=0 extruder: target=240 temp=240.1 pwm=0.444
Stats 791620.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3722099 bytes_read=1213306 bytes_retransmit=9 bytes_invalid=0 send_seq=85810 receive_seq=85810 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=79.9 pwm=0.448 sd_pos=789811 sysload=0.57 cputime=165.451 memavail=7296056 print_time=3154.503 buffer_time=2.236 print_stall=0 extruder: target=240 temp=239.9 pwm=0.521
Stats 791621.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3723057 bytes_read=1213699 bytes_retransmit=9 bytes_invalid=0 send_seq=85833 receive_seq=85833 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=79.9 pwm=0.448 sd_pos=789949 sysload=0.57 cputime=165.505 memavail=7295804 print_time=3155.573 buffer_time=2.306 print_stall=0 extruder: target=240 temp=239.8 pwm=0.541
Stats 791622.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3723907 bytes_read=1214131 bytes_retransmit=9 bytes_invalid=0 send_seq=85858 receive_seq=85858 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=79.9 pwm=0.492 sd_pos=790088 sysload=0.57 cputime=165.574 memavail=7295804 print_time=3156.843 buffer_time=2.575 print_stall=0 extruder: target=240 temp=240.1 pwm=0.443
Stats 791623.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3724404 bytes_read=1214499 bytes_retransmit=9 bytes_invalid=0 send_seq=85876 receive_seq=85876 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=79.9 pwm=0.432 sd_pos=790255 sysload=0.57 cputime=165.624 memavail=7295804 print_time=3157.440 buffer_time=2.172 print_stall=0 extruder: target=240 temp=239.8 pwm=0.576
Stats 791624.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3725549 bytes_read=1214932 bytes_retransmit=9 bytes_invalid=0 send_seq=85904 receive_seq=85904 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992879 heater_bed: target=80 temp=79.9 pwm=0.441 sd_pos=790583 sysload=0.53 cputime=165.702 memavail=7294796 print_time=3158.827 buffer_time=2.558 print_stall=0 extruder: target=240 temp=240.1 pwm=0.369
Stats 791625.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3725909 bytes_read=1215324 bytes_retransmit=9 bytes_invalid=0 send_seq=85921 receive_seq=85921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992868 heater_bed: target=80 temp=79.9 pwm=0.458 sd_pos=790665 sysload=0.53 cputime=165.756 memavail=7294800 print_time=3159.395 buffer_time=2.126 print_stall=0 extruder: target=240 temp=240.0 pwm=0.477
Stats 791626.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3726821 bytes_read=1215727 bytes_retransmit=9 bytes_invalid=0 send_seq=85946 receive_seq=85946 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=79.9 pwm=0.458 sd_pos=790912 sysload=0.53 cputime=165.813 memavail=7294800 print_time=3160.466 buffer_time=2.197 print_stall=0 extruder: target=240 temp=240.1 pwm=0.430
Stats 791627.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3728717 bytes_read=1216195 bytes_retransmit=9 bytes_invalid=0 send_seq=85984 receive_seq=85984 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=79.9 pwm=0.458 sd_pos=791270 sysload=0.53 cputime=165.868 memavail=7294336 print_time=3161.556 buffer_time=2.286 print_stall=0 extruder: target=240 temp=240.0 pwm=0.506
Stats 791628.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3730575 bytes_read=1216692 bytes_retransmit=9 bytes_invalid=0 send_seq=86022 receive_seq=86022 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992843 heater_bed: target=80 temp=79.9 pwm=0.458 sd_pos=791737 sysload=0.53 cputime=165.917 memavail=7294088 print_time=3162.340 buffer_time=2.069 print_stall=0 extruder: target=240 temp=240.1 pwm=0.449
Stats 791629.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3732469 bytes_read=1217185 bytes_retransmit=9 bytes_invalid=0 send_seq=86062 receive_seq=86062 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992898 heater_bed: target=80 temp=80.0 pwm=0.382 sd_pos=792396 sysload=0.48 cputime=165.971 memavail=7294088 print_time=3163.456 buffer_time=2.184 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 791630.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3734051 bytes_read=1217628 bytes_retransmit=9 bytes_invalid=0 send_seq=86095 receive_seq=86095 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992888 heater_bed: target=80 temp=80.0 pwm=0.382 sd_pos=793028 sysload=0.48 cputime=166.021 memavail=7298848 print_time=3164.438 buffer_time=2.165 print_stall=0 extruder: target=240 temp=239.8 pwm=0.528
Stats 791631.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3736340 bytes_read=1218175 bytes_retransmit=9 bytes_invalid=0 send_seq=86143 receive_seq=86143 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.0 pwm=0.360 sd_pos=793463 sysload=0.48 cputime=166.074 memavail=7297360 print_time=3165.990 buffer_time=2.717 print_stall=0 extruder: target=240 temp=240.2 pwm=0.365
Stats 791632.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3736682 bytes_read=1218523 bytes_retransmit=9 bytes_invalid=0 send_seq=86157 receive_seq=86157 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=793547 sysload=0.48 cputime=166.122 memavail=7297120 print_time=3166.512 buffer_time=2.239 print_stall=0 extruder: target=240 temp=240.2 pwm=0.365
Stats 791633.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3737461 bytes_read=1218906 bytes_retransmit=9 bytes_invalid=0 send_seq=86178 receive_seq=86178 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992921 heater_bed: target=80 temp=79.9 pwm=0.497 sd_pos=793687 sysload=0.48 cputime=166.189 memavail=7297120 print_time=3167.484 buffer_time=2.211 print_stall=0 extruder: target=240 temp=240.1 pwm=0.421
Stats 791634.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3738388 bytes_read=1219359 bytes_retransmit=9 bytes_invalid=0 send_seq=86202 receive_seq=86202 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992897 heater_bed: target=80 temp=79.9 pwm=0.497 sd_pos=794015 sysload=0.45 cputime=166.261 memavail=7296112 print_time=3168.511 buffer_time=2.238 print_stall=0 extruder: target=240 temp=240.0 pwm=0.464
Stats 791635.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3739044 bytes_read=1219732 bytes_retransmit=9 bytes_invalid=0 send_seq=86221 receive_seq=86221 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=79.9 pwm=0.494 sd_pos=794211 sysload=0.45 cputime=166.321 memavail=7296112 print_time=3169.795 buffer_time=2.520 print_stall=0 extruder: target=240 temp=239.9 pwm=0.527
Stats 791636.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3739663 bytes_read=1220100 bytes_retransmit=9 bytes_invalid=0 send_seq=86239 receive_seq=86239 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992942 heater_bed: target=80 temp=79.9 pwm=0.494 sd_pos=794322 sysload=0.45 cputime=166.383 memavail=7295624 print_time=3170.327 buffer_time=2.051 print_stall=0 extruder: target=240 temp=240.1 pwm=0.377
Stats 791637.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3740296 bytes_read=1220507 bytes_retransmit=9 bytes_invalid=0 send_seq=86259 receive_seq=86259 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992929 heater_bed: target=80 temp=79.9 pwm=0.464 sd_pos=794601 sysload=0.45 cputime=166.459 memavail=7294792 print_time=3171.220 buffer_time=1.944 print_stall=0 extruder: target=240 temp=239.8 pwm=0.521
Stats 791638.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3742930 bytes_read=1221040 bytes_retransmit=9 bytes_invalid=0 send_seq=86310 receive_seq=86310 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992918 heater_bed: target=80 temp=79.9 pwm=0.464 sd_pos=795148 sysload=0.45 cputime=166.531 memavail=7294876 print_time=3172.443 buffer_time=2.165 print_stall=0 extruder: target=240 temp=240.1 pwm=0.388
Stats 791639.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3745237 bytes_read=1221533 bytes_retransmit=9 bytes_invalid=0 send_seq=86355 receive_seq=86347 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992908 heater_bed: target=80 temp=79.9 pwm=0.437 sd_pos=795918 sysload=0.41 cputime=166.613 memavail=7294876 print_time=3173.641 buffer_time=2.358 print_stall=0 extruder: target=240 temp=240.3 pwm=0.344
Stats 791640.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3746831 bytes_read=1222045 bytes_retransmit=9 bytes_invalid=0 send_seq=86391 receive_seq=86391 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992894 heater_bed: target=80 temp=79.9 pwm=0.517 sd_pos=796676 sysload=0.41 cputime=166.688 memavail=7294876 print_time=3174.561 buffer_time=2.278 print_stall=0 extruder: target=240 temp=240.0 pwm=0.485
Stats 791641.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3749177 bytes_read=1222548 bytes_retransmit=9 bytes_invalid=0 send_seq=86436 receive_seq=86436 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992908 heater_bed: target=80 temp=79.9 pwm=0.426 sd_pos=797096 sysload=0.41 cputime=166.759 memavail=7294876 print_time=3176.163 buffer_time=2.879 print_stall=0 extruder: target=240 temp=239.8 pwm=0.485
Stats 791642.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3749423 bytes_read=1222906 bytes_retransmit=9 bytes_invalid=0 send_seq=86449 receive_seq=86449 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992890 heater_bed: target=80 temp=79.9 pwm=0.502 sd_pos=797152 sysload=0.41 cputime=166.810 memavail=7294876 print_time=3176.635 buffer_time=2.349 print_stall=0 extruder: target=240 temp=239.9 pwm=0.490
Stats 791643.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3750166 bytes_read=1223298 bytes_retransmit=9 bytes_invalid=0 send_seq=86469 receive_seq=86469 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992873 heater_bed: target=80 temp=79.9 pwm=0.452 sd_pos=797263 sysload=0.41 cputime=166.859 memavail=7294624 print_time=3177.427 buffer_time=2.141 print_stall=0 extruder: target=240 temp=240.0 pwm=0.490
Stats 791644.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3751201 bytes_read=1223721 bytes_retransmit=9 bytes_invalid=0 send_seq=86495 receive_seq=86495 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=79.9 pwm=0.452 sd_pos=797704 sysload=0.38 cputime=166.951 memavail=7293900 print_time=3178.636 buffer_time=2.350 print_stall=0 extruder: target=240 temp=240.0 pwm=0.456
Stats 791645.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3751724 bytes_read=1224094 bytes_retransmit=9 bytes_invalid=0 send_seq=86511 receive_seq=86511 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992906 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=797854 sysload=0.38 cputime=167.001 memavail=7294052 print_time=3179.414 buffer_time=2.126 print_stall=0 extruder: target=240 temp=240.0 pwm=0.456
Stats 791646.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3752457 bytes_read=1224496 bytes_retransmit=9 bytes_invalid=0 send_seq=86533 receive_seq=86533 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992886 heater_bed: target=80 temp=79.9 pwm=0.521 sd_pos=798048 sysload=0.38 cputime=167.067 memavail=7293400 print_time=3180.455 buffer_time=2.167 print_stall=0 extruder: target=240 temp=240.3 pwm=0.323
Stats 791647.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3753071 bytes_read=1224869 bytes_retransmit=9 bytes_invalid=0 send_seq=86552 receive_seq=86552 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992876 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=798365 sysload=0.38 cputime=167.125 memavail=7293160 print_time=3181.340 buffer_time=2.051 print_stall=0 extruder: target=240 temp=240.0 pwm=0.491
Stats 791648.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3755558 bytes_read=1225402 bytes_retransmit=9 bytes_invalid=0 send_seq=86600 receive_seq=86600 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=79.9 pwm=0.457 sd_pos=798893 sysload=0.38 cputime=167.192 memavail=7292912 print_time=3182.571 buffer_time=2.281 print_stall=0 extruder: target=240 temp=240.0 pwm=0.477
Stats 791649.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3757449 bytes_read=1225864 bytes_retransmit=9 bytes_invalid=0 send_seq=86639 receive_seq=86631 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992878 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=799476 sysload=0.35 cputime=167.259 memavail=7292664 print_time=3183.629 buffer_time=2.339 print_stall=0 extruder: target=240 temp=240.0 pwm=0.430
Stats 791650.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3758831 bytes_read=1226342 bytes_retransmit=9 bytes_invalid=0 send_seq=86671 receive_seq=86671 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992868 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=800007 sysload=0.35 cputime=167.336 memavail=7292664 print_time=3184.440 buffer_time=2.150 print_stall=0 extruder: target=240 temp=240.1 pwm=0.414
Stats 791651.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3761653 bytes_read=1226900 bytes_retransmit=9 bytes_invalid=0 send_seq=86724 receive_seq=86724 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=800743 sysload=0.35 cputime=167.405 memavail=7294428 print_time=3186.333 buffer_time=3.042 print_stall=0 extruder: target=240 temp=240.2 pwm=0.370
Stats 791652.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3761850 bytes_read=1227257 bytes_retransmit=9 bytes_invalid=0 send_seq=86737 receive_seq=86737 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992842 heater_bed: target=80 temp=80.0 pwm=0.519 sd_pos=800743 sysload=0.35 cputime=167.456 memavail=7294428 print_time=3186.333 buffer_time=2.042 print_stall=0 extruder: target=240 temp=240.1 pwm=0.464
Stats 791653.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3762674 bytes_read=1227645 bytes_retransmit=9 bytes_invalid=0 send_seq=86760 receive_seq=86760 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=800910 sysload=0.35 cputime=167.513 memavail=7294428 print_time=3187.327 buffer_time=2.035 print_stall=0 extruder: target=240 temp=239.9 pwm=0.535
Stats 791654.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3763352 bytes_read=1228035 bytes_retransmit=9 bytes_invalid=0 send_seq=86778 receive_seq=86778 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992828 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=801379 sysload=0.40 cputime=167.567 memavail=7294176 print_time=3188.451 buffer_time=2.159 print_stall=0 extruder: target=240 temp=240.0 pwm=0.426
Stats 791655.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3764373 bytes_read=1228458 bytes_retransmit=9 bytes_invalid=0 send_seq=86805 receive_seq=86805 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=801572 sysload=0.40 cputime=167.622 memavail=7294176 print_time=3189.583 buffer_time=2.289 print_stall=0 extruder: target=240 temp=239.8 pwm=0.477
Stats 791656.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3765129 bytes_read=1228836 bytes_retransmit=9 bytes_invalid=0 send_seq=86825 receive_seq=86825 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992806 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=801796 sysload=0.40 cputime=167.682 memavail=7294176 print_time=3190.688 buffer_time=2.394 print_stall=0 extruder: target=240 temp=240.1 pwm=0.419
Stats 791657.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3765798 bytes_read=1229219 bytes_retransmit=9 bytes_invalid=0 send_seq=86843 receive_seq=86843 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=802130 sysload=0.40 cputime=167.736 memavail=7293952 print_time=3191.514 buffer_time=2.218 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 791658.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3767841 bytes_read=1229721 bytes_retransmit=9 bytes_invalid=0 send_seq=86885 receive_seq=86885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=802435 sysload=0.40 cputime=167.809 memavail=7293952 print_time=3192.374 buffer_time=2.077 print_stall=0 extruder: target=240 temp=240.1 pwm=0.436
Stats 791659.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3769918 bytes_read=1230224 bytes_retransmit=9 bytes_invalid=0 send_seq=86927 receive_seq=86927 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=803128 sysload=0.45 cputime=167.879 memavail=7293952 print_time=3193.503 buffer_time=2.205 print_stall=0 extruder: target=240 temp=239.9 pwm=0.539
Stats 791660.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3771966 bytes_read=1230727 bytes_retransmit=9 bytes_invalid=0 send_seq=86969 receive_seq=86969 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=803931 sysload=0.45 cputime=167.958 memavail=7293712 print_time=3194.614 buffer_time=2.315 print_stall=0 extruder: target=240 temp=239.8 pwm=0.542
Stats 791661.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3774137 bytes_read=1231244 bytes_retransmit=9 bytes_invalid=0 send_seq=87014 receive_seq=87014 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=804574 sysload=0.45 cputime=168.031 memavail=7293460 print_time=3195.376 buffer_time=2.076 print_stall=0 extruder: target=240 temp=239.9 pwm=0.465
Stats 791662.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3775164 bytes_read=1231647 bytes_retransmit=9 bytes_invalid=0 send_seq=87039 receive_seq=87039 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.0 pwm=0.514 sd_pos=804741 sysload=0.45 cputime=168.092 memavail=7293608 print_time=3196.447 buffer_time=2.147 print_stall=0 extruder: target=240 temp=240.2 pwm=0.392
Stats 791663.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3775973 bytes_read=1232045 bytes_retransmit=9 bytes_invalid=0 send_seq=87060 receive_seq=87060 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.0 pwm=0.525 sd_pos=804907 sysload=0.45 cputime=168.151 memavail=7296644 print_time=3197.453 buffer_time=2.152 print_stall=0 extruder: target=240 temp=240.3 pwm=0.341
Stats 791664.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3776680 bytes_read=1232462 bytes_retransmit=9 bytes_invalid=0 send_seq=87082 receive_seq=87082 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.447 sd_pos=805240 sysload=0.49 cputime=168.211 memavail=7295916 print_time=3198.302 buffer_time=2.000 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 791665.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3777817 bytes_read=1232875 bytes_retransmit=9 bytes_invalid=0 send_seq=87109 receive_seq=87109 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=805569 sysload=0.49 cputime=168.274 memavail=7288472 print_time=3199.695 buffer_time=2.393 print_stall=0 extruder: target=240 temp=239.8 pwm=0.544
Stats 791666.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3778571 bytes_read=1233273 bytes_retransmit=9 bytes_invalid=0 send_seq=87130 receive_seq=87130 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=805793 sysload=0.49 cputime=168.313 memavail=7293356 print_time=3200.812 buffer_time=2.509 print_stall=0 extruder: target=240 temp=239.9 pwm=0.415
Stats 791667.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3779106 bytes_read=1233660 bytes_retransmit=9 bytes_invalid=0 send_seq=87149 receive_seq=87149 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=806013 sysload=0.49 cputime=168.382 memavail=7292476 print_time=3201.306 buffer_time=2.003 print_stall=0 extruder: target=240 temp=240.0 pwm=0.417
Stats 791668.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3781302 bytes_read=1234153 bytes_retransmit=9 bytes_invalid=0 send_seq=87192 receive_seq=87192 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=806426 sysload=0.49 cputime=168.436 memavail=7295588 print_time=3202.492 buffer_time=2.189 print_stall=0 extruder: target=240 temp=240.1 pwm=0.417
Stats 791669.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3783152 bytes_read=1234651 bytes_retransmit=9 bytes_invalid=0 send_seq=87230 receive_seq=87230 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=806997 sysload=0.69 cputime=168.497 memavail=7295832 print_time=3203.563 buffer_time=2.258 print_stall=0 extruder: target=240 temp=240.1 pwm=0.444
Stats 791670.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3785053 bytes_read=1235143 bytes_retransmit=9 bytes_invalid=0 send_seq=87270 receive_seq=87270 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=80.0 pwm=0.380 sd_pos=807655 sysload=0.69 cputime=168.554 memavail=7295716 print_time=3204.663 buffer_time=2.358 print_stall=0 extruder: target=240 temp=240.3 pwm=0.342
Stats 791671.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3787186 bytes_read=1235641 bytes_retransmit=9 bytes_invalid=0 send_seq=87314 receive_seq=87314 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.445 sd_pos=808281 sysload=0.69 cputime=168.618 memavail=7295716 print_time=3205.473 buffer_time=2.167 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 791672.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3788206 bytes_read=1236059 bytes_retransmit=9 bytes_invalid=0 send_seq=87339 receive_seq=87339 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=808475 sysload=0.69 cputime=168.665 memavail=7295716 print_time=3206.468 buffer_time=2.161 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 791673.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3789041 bytes_read=1236466 bytes_retransmit=9 bytes_invalid=0 send_seq=87362 receive_seq=87362 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=808670 sysload=0.69 cputime=168.717 memavail=7295716 print_time=3207.556 buffer_time=2.248 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 791674.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3789775 bytes_read=1236864 bytes_retransmit=9 bytes_invalid=0 send_seq=87383 receive_seq=87383 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992732 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=809016 sysload=0.64 cputime=168.777 memavail=7294972 print_time=3208.398 buffer_time=2.088 print_stall=0 extruder: target=240 temp=240.1 pwm=0.377
Stats 791675.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3790881 bytes_read=1237302 bytes_retransmit=9 bytes_invalid=0 send_seq=87412 receive_seq=87412 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=80.0 pwm=0.498 sd_pos=809384 sysload=0.64 cputime=168.842 memavail=7294976 print_time=3209.755 buffer_time=2.446 print_stall=0 extruder: target=240 temp=240.1 pwm=0.408
Stats 791676.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3791360 bytes_read=1237674 bytes_retransmit=9 bytes_invalid=0 send_seq=87429 receive_seq=87428 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=809496 sysload=0.64 cputime=168.903 memavail=7294736 print_time=3210.362 buffer_time=2.052 print_stall=0 extruder: target=240 temp=240.2 pwm=0.410
Stats 791677.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3792276 bytes_read=1238072 bytes_retransmit=9 bytes_invalid=0 send_seq=87452 receive_seq=87452 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=809855 sysload=0.64 cputime=168.960 memavail=7294248 print_time=3211.426 buffer_time=2.115 print_stall=0 extruder: target=240 temp=240.3 pwm=0.410
Stats 791678.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3794315 bytes_read=1238570 bytes_retransmit=9 bytes_invalid=0 send_seq=87493 receive_seq=87493 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992720 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=810185 sysload=0.64 cputime=169.020 memavail=7294248 print_time=3212.484 buffer_time=2.173 print_stall=0 extruder: target=240 temp=240.1 pwm=0.430
Stats 791679.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3795797 bytes_read=1239052 bytes_retransmit=9 bytes_invalid=0 send_seq=87528 receive_seq=87528 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992716 heater_bed: target=80 temp=80.0 pwm=0.508 sd_pos=810659 sysload=0.59 cputime=169.092 memavail=7294248 print_time=3213.376 buffer_time=2.064 print_stall=0 extruder: target=240 temp=239.9 pwm=0.428
Stats 791680.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3797264 bytes_read=1239495 bytes_retransmit=9 bytes_invalid=0 send_seq=87561 receive_seq=87561 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992717 heater_bed: target=80 temp=80.0 pwm=0.508 sd_pos=811104 sysload=0.59 cputime=169.162 memavail=7294248 print_time=3214.376 buffer_time=2.063 print_stall=0 extruder: target=240 temp=240.2 pwm=0.324
Stats 791681.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3798876 bytes_read=1239963 bytes_retransmit=9 bytes_invalid=0 send_seq=87596 receive_seq=87596 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992710 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=811977 sysload=0.59 cputime=169.237 memavail=7293996 print_time=3215.371 buffer_time=2.057 print_stall=0 extruder: target=240 temp=240.1 pwm=0.410
Stats 791682.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3801447 bytes_read=1240520 bytes_retransmit=9 bytes_invalid=0 send_seq=87649 receive_seq=87649 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992711 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=812390 sysload=0.59 cputime=169.313 memavail=7293996 print_time=3216.856 buffer_time=2.541 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 791683.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3802538 bytes_read=1240928 bytes_retransmit=9 bytes_invalid=0 send_seq=87675 receive_seq=87675 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992707 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=812666 sysload=0.59 cputime=169.376 memavail=7293996 print_time=3217.937 buffer_time=2.622 print_stall=0 extruder: target=240 temp=240.0 pwm=0.500
Stats 791684.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3803304 bytes_read=1241341 bytes_retransmit=9 bytes_invalid=0 send_seq=87696 receive_seq=87696 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992707 heater_bed: target=80 temp=80.0 pwm=0.354 sd_pos=813108 sysload=0.54 cputime=169.444 memavail=7293240 print_time=3218.572 buffer_time=2.256 print_stall=0 extruder: target=240 temp=240.0 pwm=0.442
Stats 791685.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3804314 bytes_read=1241763 bytes_retransmit=9 bytes_invalid=0 send_seq=87722 receive_seq=87722 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.376 sd_pos=813354 sysload=0.54 cputime=169.510 memavail=7293244 print_time=3219.457 buffer_time=2.141 print_stall=0 extruder: target=240 temp=240.1 pwm=0.383
Stats 791686.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3805763 bytes_read=1242201 bytes_retransmit=9 bytes_invalid=0 send_seq=87754 receive_seq=87754 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992775 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=813853 sysload=0.54 cputime=169.567 memavail=7293020 print_time=3220.318 buffer_time=2.001 print_stall=0 extruder: target=240 temp=240.0 pwm=0.438
Stats 791687.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3806723 bytes_read=1242624 bytes_retransmit=9 bytes_invalid=0 send_seq=87780 receive_seq=87780 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=814077 sysload=0.54 cputime=169.618 memavail=7293020 print_time=3221.348 buffer_time=2.029 print_stall=0 extruder: target=240 temp=240.1 pwm=0.412
Stats 791688.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3809813 bytes_read=1243221 bytes_retransmit=9 bytes_invalid=0 send_seq=87841 receive_seq=87841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.516 sd_pos=814932 sysload=0.54 cputime=169.693 memavail=7293020 print_time=3222.925 buffer_time=2.606 print_stall=0 extruder: target=240 temp=240.2 pwm=0.398
Stats 791689.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3810817 bytes_read=1243638 bytes_retransmit=9 bytes_invalid=0 send_seq=87867 receive_seq=87867 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.503 sd_pos=815184 sysload=0.49 cputime=169.747 memavail=7293776 print_time=3223.378 buffer_time=2.059 print_stall=0 extruder: target=240 temp=240.0 pwm=0.535
Stats 791690.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3812175 bytes_read=1244073 bytes_retransmit=9 bytes_invalid=0 send_seq=87897 receive_seq=87897 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=815741 sysload=0.49 cputime=169.814 memavail=7293776 print_time=3224.397 buffer_time=2.078 print_stall=0 extruder: target=240 temp=239.9 pwm=0.453
Stats 791691.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3814138 bytes_read=1244562 bytes_retransmit=9 bytes_invalid=0 send_seq=87937 receive_seq=87937 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=816519 sysload=0.49 cputime=169.875 memavail=7293776 print_time=3225.461 buffer_time=2.140 print_stall=0 extruder: target=240 temp=240.1 pwm=0.389
Stats 791692.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3816700 bytes_read=1245095 bytes_retransmit=9 bytes_invalid=0 send_seq=87988 receive_seq=87988 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=817117 sysload=0.49 cputime=169.928 memavail=7293776 print_time=3226.720 buffer_time=2.398 print_stall=0 extruder: target=240 temp=239.9 pwm=0.454
Stats 791693.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3818095 bytes_read=1245553 bytes_retransmit=9 bytes_invalid=0 send_seq=88021 receive_seq=88021 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.504 sd_pos=817616 sysload=0.49 cputime=169.987 memavail=7293020 print_time=3228.204 buffer_time=2.883 print_stall=0 extruder: target=240 temp=240.1 pwm=0.443
Stats 791694.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3818452 bytes_read=1245935 bytes_retransmit=9 bytes_invalid=0 send_seq=88036 receive_seq=88036 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=80.0 pwm=0.504 sd_pos=817756 sysload=0.45 cputime=170.044 memavail=7292768 print_time=3228.535 buffer_time=2.213 print_stall=0 extruder: target=240 temp=239.9 pwm=0.500
Stats 791695.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3819463 bytes_read=1246354 bytes_retransmit=9 bytes_invalid=0 send_seq=88062 receive_seq=88062 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=818222 sysload=0.45 cputime=170.101 memavail=7292772 print_time=3229.338 buffer_time=2.015 print_stall=0 extruder: target=240 temp=239.7 pwm=0.574
Stats 791696.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3821324 bytes_read=1246852 bytes_retransmit=9 bytes_invalid=0 send_seq=88103 receive_seq=88103 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=80.0 pwm=0.488 sd_pos=818882 sysload=0.45 cputime=170.163 memavail=7292772 print_time=3230.587 buffer_time=2.264 print_stall=0 extruder: target=240 temp=240.0 pwm=0.413
Stats 791697.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3822304 bytes_read=1247269 bytes_retransmit=9 bytes_invalid=0 send_seq=88128 receive_seq=88128 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.386 sd_pos=819073 sysload=0.45 cputime=170.226 memavail=7292192 print_time=3231.616 buffer_time=2.291 print_stall=0 extruder: target=240 temp=240.2 pwm=0.351
Stats 791698.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3823746 bytes_read=1247707 bytes_retransmit=9 bytes_invalid=0 send_seq=88160 receive_seq=88160 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.0 pwm=0.386 sd_pos=819767 sysload=0.45 cputime=170.296 memavail=7292280 print_time=3232.570 buffer_time=2.245 print_stall=0 extruder: target=240 temp=240.2 pwm=0.351
Stats 791699.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3826227 bytes_read=1248265 bytes_retransmit=9 bytes_invalid=0 send_seq=88210 receive_seq=88210 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=820264 sysload=0.42 cputime=170.362 memavail=7292280 print_time=3233.610 buffer_time=2.284 print_stall=0 extruder: target=240 temp=240.0 pwm=0.454
Stats 791700.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3827594 bytes_read=1248717 bytes_retransmit=9 bytes_invalid=0 send_seq=88242 receive_seq=88242 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=820790 sysload=0.42 cputime=170.426 memavail=7295604 print_time=3234.534 buffer_time=2.208 print_stall=0 extruder: target=240 temp=240.1 pwm=0.448
Stats 791701.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3829401 bytes_read=1249190 bytes_retransmit=9 bytes_invalid=0 send_seq=88281 receive_seq=88281 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=821458 sysload=0.42 cputime=170.484 memavail=7294372 print_time=3235.513 buffer_time=2.187 print_stall=0 extruder: target=240 temp=239.8 pwm=0.512
Stats 791702.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3831948 bytes_read=1249748 bytes_retransmit=9 bytes_invalid=0 send_seq=88334 receive_seq=88334 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=822096 sysload=0.42 cputime=170.551 memavail=7294372 print_time=3236.698 buffer_time=2.370 print_stall=0 extruder: target=240 temp=239.8 pwm=0.487
Stats 791703.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3833066 bytes_read=1250170 bytes_retransmit=9 bytes_invalid=0 send_seq=88360 receive_seq=88360 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=822623 sysload=0.42 cputime=170.610 memavail=7294120 print_time=3237.478 buffer_time=2.150 print_stall=0 extruder: target=240 temp=240.1 pwm=0.420
Stats 791704.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3834006 bytes_read=1250583 bytes_retransmit=9 bytes_invalid=0 send_seq=88384 receive_seq=88384 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=822828 sysload=0.38 cputime=170.685 memavail=7293872 print_time=3238.392 buffer_time=2.064 print_stall=0 extruder: target=240 temp=240.0 pwm=0.489
Stats 791705.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3835153 bytes_read=1251016 bytes_retransmit=9 bytes_invalid=0 send_seq=88412 receive_seq=88412 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=823405 sysload=0.38 cputime=170.756 memavail=7293872 print_time=3239.328 buffer_time=1.999 print_stall=0 extruder: target=240 temp=240.1 pwm=0.423
Stats 791706.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3836543 bytes_read=1251478 bytes_retransmit=9 bytes_invalid=0 send_seq=88446 receive_seq=88446 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.0 pwm=0.488 sd_pos=824011 sysload=0.38 cputime=170.818 memavail=7293872 print_time=3240.422 buffer_time=2.093 print_stall=0 extruder: target=240 temp=240.0 pwm=0.395
Stats 791707.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3838498 bytes_read=1251951 bytes_retransmit=9 bytes_invalid=0 send_seq=88485 receive_seq=88485 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=824651 sysload=0.38 cputime=170.880 memavail=7294612 print_time=3241.812 buffer_time=2.481 print_stall=0 extruder: target=240 temp=240.1 pwm=0.419
Stats 791708.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3839791 bytes_read=1252409 bytes_retransmit=9 bytes_invalid=0 send_seq=88518 receive_seq=88518 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=825237 sysload=0.38 cputime=170.942 memavail=7294628 print_time=3242.483 buffer_time=2.152 print_stall=0 extruder: target=240 temp=240.0 pwm=0.470
Stats 791709.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3842674 bytes_read=1253011 bytes_retransmit=9 bytes_invalid=0 send_seq=88577 receive_seq=88577 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=825871 sysload=0.43 cputime=171.018 memavail=7294628 print_time=3243.635 buffer_time=2.303 print_stall=0 extruder: target=240 temp=239.8 pwm=0.570
Stats 791710.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3844618 bytes_read=1253494 bytes_retransmit=9 bytes_invalid=0 send_seq=88618 receive_seq=88618 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.525 sd_pos=826756 sysload=0.43 cputime=171.083 memavail=7294140 print_time=3244.695 buffer_time=2.362 print_stall=0 extruder: target=240 temp=239.9 pwm=0.438
Stats 791711.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3846140 bytes_read=1253957 bytes_retransmit=9 bytes_invalid=0 send_seq=88652 receive_seq=88652 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=80.0 pwm=0.503 sd_pos=827340 sysload=0.43 cputime=171.140 memavail=7294140 print_time=3245.476 buffer_time=2.142 print_stall=0 extruder: target=240 temp=240.1 pwm=0.438
Stats 791712.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3848698 bytes_read=1254509 bytes_retransmit=9 bytes_invalid=0 send_seq=88704 receive_seq=88704 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=828125 sysload=0.43 cputime=171.208 memavail=7294140 print_time=3246.543 buffer_time=2.209 print_stall=0 extruder: target=240 temp=240.2 pwm=0.324
Stats 791713.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3849914 bytes_read=1254932 bytes_retransmit=9 bytes_invalid=0 send_seq=88733 receive_seq=88733 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.517 sd_pos=828460 sysload=0.43 cputime=171.264 memavail=7294140 print_time=3247.405 buffer_time=2.070 print_stall=0 extruder: target=240 temp=239.9 pwm=0.471
Stats 791714.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3851424 bytes_read=1255395 bytes_retransmit=9 bytes_invalid=0 send_seq=88764 receive_seq=88764 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.517 sd_pos=828988 sysload=0.40 cputime=171.333 memavail=7293396 print_time=3248.634 buffer_time=2.299 print_stall=0 extruder: target=240 temp=240.0 pwm=0.471
Stats 791715.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3852561 bytes_read=1255822 bytes_retransmit=9 bytes_invalid=0 send_seq=88791 receive_seq=88791 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=829623 sysload=0.40 cputime=171.406 memavail=7293396 print_time=3249.445 buffer_time=2.108 print_stall=0 extruder: target=240 temp=240.2 pwm=0.371
Stats 791716.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3854090 bytes_read=1256260 bytes_retransmit=9 bytes_invalid=0 send_seq=88823 receive_seq=88823 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=79.9 pwm=0.464 sd_pos=830171 sysload=0.40 cputime=171.471 memavail=7293172 print_time=3250.657 buffer_time=2.319 print_stall=0 extruder: target=240 temp=240.0 pwm=0.470
Stats 791717.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3855697 bytes_read=1256733 bytes_retransmit=9 bytes_invalid=0 send_seq=88859 receive_seq=88859 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=79.9 pwm=0.464 sd_pos=830807 sysload=0.40 cputime=171.549 memavail=7293204 print_time=3251.480 buffer_time=2.141 print_stall=0 extruder: target=240 temp=240.1 pwm=0.419
Stats 791718.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3857009 bytes_read=1257180 bytes_retransmit=9 bytes_invalid=0 send_seq=88890 receive_seq=88890 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=79.9 pwm=0.518 sd_pos=831190 sysload=0.40 cputime=171.606 memavail=7293204 print_time=3252.431 buffer_time=2.092 print_stall=0 extruder: target=240 temp=240.0 pwm=0.471
Stats 791719.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3860586 bytes_read=1257813 bytes_retransmit=9 bytes_invalid=0 send_seq=88958 receive_seq=88958 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=79.9 pwm=0.554 sd_pos=832073 sysload=0.37 cputime=171.686 memavail=7293204 print_time=3253.848 buffer_time=2.507 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 791720.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3861727 bytes_read=1258246 bytes_retransmit=9 bytes_invalid=0 send_seq=88986 receive_seq=88986 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=832545 sysload=0.37 cputime=171.748 memavail=7293204 print_time=3254.402 buffer_time=2.061 print_stall=0 extruder: target=240 temp=239.9 pwm=0.487
Stats 791721.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3864293 bytes_read=1258793 bytes_retransmit=9 bytes_invalid=0 send_seq=89037 receive_seq=89037 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.315 sd_pos=833267 sysload=0.37 cputime=171.815 memavail=7293204 print_time=3255.528 buffer_time=2.186 print_stall=0 extruder: target=240 temp=240.0 pwm=0.382
Stats 791722.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3866154 bytes_read=1259266 bytes_retransmit=9 bytes_invalid=0 send_seq=89076 receive_seq=89076 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.386 sd_pos=833851 sysload=0.37 cputime=171.883 memavail=7292980 print_time=3256.555 buffer_time=2.212 print_stall=0 extruder: target=240 temp=239.8 pwm=0.533
Stats 791723.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3868965 bytes_read=1259839 bytes_retransmit=9 bytes_invalid=0 send_seq=89132 receive_seq=89132 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.381 sd_pos=834448 sysload=0.37 cputime=171.947 memavail=7292980 print_time=3257.779 buffer_time=2.435 print_stall=0 extruder: target=240 temp=240.1 pwm=0.370
Stats 791724.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3869900 bytes_read=1260275 bytes_retransmit=9 bytes_invalid=0 send_seq=89158 receive_seq=89158 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.0 pwm=0.385 sd_pos=834977 sysload=0.34 cputime=172.007 memavail=7295976 print_time=3258.366 buffer_time=2.022 print_stall=0 extruder: target=240 temp=239.7 pwm=0.607
Stats 791725.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3871424 bytes_read=1260711 bytes_retransmit=9 bytes_invalid=0 send_seq=89191 receive_seq=89191 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=835506 sysload=0.34 cputime=172.064 memavail=7294008 print_time=3259.665 buffer_time=2.320 print_stall=0 extruder: target=240 temp=240.0 pwm=0.392
Stats 791726.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3872491 bytes_read=1261126 bytes_retransmit=9 bytes_invalid=0 send_seq=89217 receive_seq=89217 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=836109 sysload=0.34 cputime=172.137 memavail=7293268 print_time=3260.431 buffer_time=2.085 print_stall=0 extruder: target=240 temp=240.0 pwm=0.447
Stats 791727.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3874126 bytes_read=1261572 bytes_retransmit=9 bytes_invalid=0 send_seq=89253 receive_seq=89248 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992775 heater_bed: target=80 temp=80.0 pwm=0.524 sd_pos=836689 sysload=0.34 cputime=172.212 memavail=7292660 print_time=3261.514 buffer_time=2.164 print_stall=0 extruder: target=240 temp=239.8 pwm=0.511
Stats 791728.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3875891 bytes_read=1262060 bytes_retransmit=9 bytes_invalid=0 send_seq=89290 receive_seq=89290 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=837186 sysload=0.34 cputime=172.274 memavail=7292704 print_time=3262.732 buffer_time=2.382 print_stall=0 extruder: target=240 temp=240.2 pwm=0.324
Stats 791729.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3877298 bytes_read=1262523 bytes_retransmit=9 bytes_invalid=0 send_seq=89321 receive_seq=89321 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=837764 sysload=0.31 cputime=172.330 memavail=7292704 print_time=3263.384 buffer_time=2.033 print_stall=0 extruder: target=240 temp=240.1 pwm=0.403
Stats 791730.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3879752 bytes_read=1263055 bytes_retransmit=9 bytes_invalid=0 send_seq=89369 receive_seq=89369 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992824 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=838440 sysload=0.31 cputime=172.386 memavail=7296308 print_time=3264.441 buffer_time=2.089 print_stall=0 extruder: target=240 temp=239.9 pwm=0.496
Stats 791731.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3882333 bytes_read=1263593 bytes_retransmit=9 bytes_invalid=0 send_seq=89421 receive_seq=89421 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=79.9 pwm=0.474 sd_pos=839435 sysload=0.31 cputime=172.455 memavail=7299712 print_time=3265.710 buffer_time=2.357 print_stall=0 extruder: target=240 temp=239.8 pwm=0.567
Stats 791732.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3884087 bytes_read=1264076 bytes_retransmit=9 bytes_invalid=0 send_seq=89459 receive_seq=89459 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=840047 sysload=0.31 cputime=172.522 memavail=7299712 print_time=3266.429 buffer_time=2.075 print_stall=0 extruder: target=240 temp=239.8 pwm=0.496
Stats 791733.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3887079 bytes_read=1264653 bytes_retransmit=9 bytes_invalid=0 send_seq=89516 receive_seq=89516 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992850 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=840819 sysload=0.31 cputime=172.589 memavail=7298704 print_time=3267.884 buffer_time=2.530 print_stall=0 extruder: target=240 temp=239.8 pwm=0.496
Stats 791734.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3887871 bytes_read=1265052 bytes_retransmit=9 bytes_invalid=0 send_seq=89537 receive_seq=89537 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119992842 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=841319 sysload=0.28 cputime=172.644 memavail=7297472 print_time=3268.437 buffer_time=2.082 print_stall=0 extruder: target=240 temp=239.8 pwm=0.496
Stats 791735.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3889151 bytes_read=1265505 bytes_retransmit=9 bytes_invalid=0 send_seq=89569 receive_seq=89569 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=841706 sysload=0.28 cputime=172.714 memavail=7297232 print_time=3269.459 buffer_time=2.103 print_stall=0 extruder: target=240 temp=239.9 pwm=0.464
Stats 791736.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3890711 bytes_read=1265972 bytes_retransmit=9 bytes_invalid=0 send_seq=89604 receive_seq=89604 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992825 heater_bed: target=80 temp=80.0 pwm=0.348 sd_pos=842613 sysload=0.28 cputime=172.796 memavail=7297232 print_time=3270.528 buffer_time=2.171 print_stall=0 extruder: target=240 temp=240.1 pwm=0.432
Stats 791737.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3892198 bytes_read=1266380 bytes_retransmit=9 bytes_invalid=0 send_seq=89637 receive_seq=89630 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992818 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=843247 sysload=0.28 cputime=172.875 memavail=7296492 print_time=3271.621 buffer_time=2.263 print_stall=0 extruder: target=240 temp=240.2 pwm=0.432
Stats 791738.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3893908 bytes_read=1266902 bytes_retransmit=9 bytes_invalid=0 send_seq=89673 receive_seq=89673 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=843800 sysload=0.28 cputime=172.947 memavail=7296492 print_time=3272.845 buffer_time=2.486 print_stall=0 extruder: target=240 temp=240.0 pwm=0.432
Stats 791739.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3895340 bytes_read=1267350 bytes_retransmit=9 bytes_invalid=0 send_seq=89704 receive_seq=89704 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=844350 sysload=0.26 cputime=173.018 memavail=7295736 print_time=3273.415 buffer_time=2.055 print_stall=0 extruder: target=240 temp=240.0 pwm=0.494
Stats 791740.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3897850 bytes_read=1267883 bytes_retransmit=9 bytes_invalid=0 send_seq=89755 receive_seq=89755 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992801 heater_bed: target=80 temp=80.0 pwm=0.367 sd_pos=845035 sysload=0.26 cputime=173.102 memavail=7295484 print_time=3274.492 buffer_time=2.131 print_stall=0 extruder: target=240 temp=240.1 pwm=0.424
Stats 791741.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3899746 bytes_read=1268385 bytes_retransmit=9 bytes_invalid=0 send_seq=89794 receive_seq=89794 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=845753 sysload=0.26 cputime=173.182 memavail=7295488 print_time=3275.392 buffer_time=2.031 print_stall=0 extruder: target=240 temp=240.0 pwm=0.440
Stats 791742.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3902059 bytes_read=1268893 bytes_retransmit=9 bytes_invalid=0 send_seq=89840 receive_seq=89840 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=846779 sysload=0.26 cputime=173.276 memavail=7295488 print_time=3276.465 buffer_time=2.104 print_stall=0 extruder: target=240 temp=240.0 pwm=0.420
Stats 791743.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3904637 bytes_read=1269416 bytes_retransmit=9 bytes_invalid=0 send_seq=89889 receive_seq=89889 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=847576 sysload=0.26 cputime=173.353 memavail=7295488 print_time=3277.425 buffer_time=2.063 print_stall=0 extruder: target=240 temp=239.9 pwm=0.420
Stats 791744.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3906293 bytes_read=1269919 bytes_retransmit=9 bytes_invalid=0 send_seq=89925 receive_seq=89925 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=848213 sysload=0.32 cputime=173.432 memavail=7294984 print_time=3278.565 buffer_time=2.202 print_stall=0 extruder: target=240 temp=240.0 pwm=0.433
Stats 791745.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3907689 bytes_read=1270352 bytes_retransmit=9 bytes_invalid=0 send_seq=89956 receive_seq=89956 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=848656 sysload=0.32 cputime=173.509 memavail=7294984 print_time=3279.581 buffer_time=2.217 print_stall=0 extruder: target=240 temp=239.9 pwm=0.496
Stats 791746.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3909011 bytes_read=1270775 bytes_retransmit=9 bytes_invalid=0 send_seq=89985 receive_seq=89985 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=80.0 pwm=0.356 sd_pos=849349 sysload=0.32 cputime=173.591 memavail=7294228 print_time=3280.440 buffer_time=2.076 print_stall=0 extruder: target=240 temp=239.8 pwm=0.469
Stats 791747.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3910560 bytes_read=1271262 bytes_retransmit=9 bytes_invalid=0 send_seq=90021 receive_seq=90021 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=849920 sysload=0.32 cputime=173.665 memavail=7293764 print_time=3281.492 buffer_time=2.127 print_stall=0 extruder: target=240 temp=239.9 pwm=0.452
Stats 791748.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3913153 bytes_read=1271800 bytes_retransmit=9 bytes_invalid=0 send_seq=90073 receive_seq=90073 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=850939 sysload=0.32 cputime=173.749 memavail=7294032 print_time=3283.005 buffer_time=2.640 print_stall=0 extruder: target=240 temp=240.1 pwm=0.394
Stats 791749.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3914408 bytes_read=1272238 bytes_retransmit=9 bytes_invalid=0 send_seq=90102 receive_seq=90102 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.519 sd_pos=851464 sysload=0.29 cputime=173.816 memavail=7293292 print_time=3283.496 buffer_time=2.131 print_stall=0 extruder: target=240 temp=240.1 pwm=0.405
Stats 791750.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3917450 bytes_read=1272830 bytes_retransmit=9 bytes_invalid=0 send_seq=90159 receive_seq=90159 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=852320 sysload=0.29 cputime=173.893 memavail=7293292 print_time=3284.591 buffer_time=2.224 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 791751.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3919840 bytes_read=1273348 bytes_retransmit=9 bytes_invalid=0 send_seq=90207 receive_seq=90207 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=853406 sysload=0.29 cputime=173.978 memavail=7293296 print_time=3285.652 buffer_time=2.285 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 791752.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3921730 bytes_read=1273816 bytes_retransmit=9 bytes_invalid=0 send_seq=90245 receive_seq=90245 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=854156 sysload=0.29 cputime=174.058 memavail=7293296 print_time=3286.467 buffer_time=2.099 print_stall=0 extruder: target=240 temp=239.7 pwm=0.551
Stats 791753.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=3924576 bytes_read=1274408 bytes_retransmit=9 bytes_invalid=0 send_seq=90302 receive_seq=90302 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=855118 sysload=0.29 cputime=174.142 memavail=7293296 print_time=3287.894 buffer_time=2.525 print_stall=0 extruder: target=240 temp=240.0 pwm=0.447
Stats 791754.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3925538 bytes_read=1274827 bytes_retransmit=9 bytes_invalid=0 send_seq=90327 receive_seq=90327 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=855644 sysload=0.27 cputime=174.207 memavail=7293296 print_time=3288.420 buffer_time=2.051 print_stall=0 extruder: target=240 temp=240.0 pwm=0.437
Stats 791755.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3927111 bytes_read=1275265 bytes_retransmit=9 bytes_invalid=0 send_seq=90359 receive_seq=90359 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=856251 sysload=0.27 cputime=174.259 memavail=7293296 print_time=3289.484 buffer_time=2.115 print_stall=0 extruder: target=240 temp=240.0 pwm=0.439
Stats 791756.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3929072 bytes_read=1275793 bytes_retransmit=9 bytes_invalid=0 send_seq=90401 receive_seq=90401 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=857191 sysload=0.27 cputime=174.339 memavail=7293296 print_time=3290.527 buffer_time=2.157 print_stall=0 extruder: target=240 temp=239.9 pwm=0.454
Stats 791757.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3930398 bytes_read=1276231 bytes_retransmit=9 bytes_invalid=0 send_seq=90433 receive_seq=90433 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=857577 sysload=0.27 cputime=174.396 memavail=7292716 print_time=3291.390 buffer_time=2.019 print_stall=0 extruder: target=240 temp=239.8 pwm=0.496
Stats 791758.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3932832 bytes_read=1276744 bytes_retransmit=9 bytes_invalid=0 send_seq=90480 receive_seq=90480 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=858545 sysload=0.27 cputime=174.451 memavail=7292564 print_time=3292.870 buffer_time=2.499 print_stall=0 extruder: target=240 temp=239.9 pwm=0.437
Stats 791759.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3934437 bytes_read=1277256 bytes_retransmit=9 bytes_invalid=0 send_seq=90518 receive_seq=90518 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=859097 sysload=0.25 cputime=174.512 memavail=7292564 print_time=3293.425 buffer_time=2.053 print_stall=0 extruder: target=240 temp=239.8 pwm=0.488
Stats 791760.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3937242 bytes_read=1277805 bytes_retransmit=9 bytes_invalid=0 send_seq=90573 receive_seq=90573 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=80.0 pwm=0.516 sd_pos=859856 sysload=0.25 cputime=174.586 memavail=7292564 print_time=3294.414 buffer_time=2.042 print_stall=0 extruder: target=240 temp=240.0 pwm=0.444
Stats 791761.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3939738 bytes_read=1278321 bytes_retransmit=9 bytes_invalid=0 send_seq=90622 receive_seq=90622 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=80.0 pwm=0.549 sd_pos=860881 sysload=0.25 cputime=174.654 memavail=7292564 print_time=3295.538 buffer_time=2.165 print_stall=0 extruder: target=240 temp=240.1 pwm=0.416
Stats 791762.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3941983 bytes_read=1278866 bytes_retransmit=9 bytes_invalid=0 send_seq=90671 receive_seq=90671 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=861837 sysload=0.25 cputime=174.739 memavail=7293320 print_time=3296.577 buffer_time=2.203 print_stall=0 extruder: target=240 temp=239.9 pwm=0.509
Stats 791763.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3944513 bytes_read=1279394 bytes_retransmit=9 bytes_invalid=0 send_seq=90721 receive_seq=90721 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=862505 sysload=0.25 cputime=174.811 memavail=7292816 print_time=3297.787 buffer_time=2.412 print_stall=0 extruder: target=240 temp=240.1 pwm=0.348
Stats 791764.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3945806 bytes_read=1279833 bytes_retransmit=9 bytes_invalid=0 send_seq=90750 receive_seq=90750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=863226 sysload=0.39 cputime=174.875 memavail=7292340 print_time=3298.568 buffer_time=2.193 print_stall=0 extruder: target=240 temp=240.1 pwm=0.374
Stats 791765.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3947403 bytes_read=1280320 bytes_retransmit=9 bytes_invalid=0 send_seq=90786 receive_seq=90786 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=863695 sysload=0.39 cputime=174.931 memavail=7292344 print_time=3299.630 buffer_time=2.254 print_stall=0 extruder: target=240 temp=240.2 pwm=0.374
Stats 791766.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3948777 bytes_read=1280758 bytes_retransmit=9 bytes_invalid=0 send_seq=90818 receive_seq=90818 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=864408 sysload=0.39 cputime=174.997 memavail=7291336 print_time=3300.392 buffer_time=2.016 print_stall=0 extruder: target=240 temp=240.2 pwm=0.345
Stats 791767.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3950618 bytes_read=1281231 bytes_retransmit=9 bytes_invalid=0 send_seq=90857 receive_seq=90857 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.483 sd_pos=865124 sysload=0.39 cputime=175.064 memavail=7291336 print_time=3301.591 buffer_time=2.214 print_stall=0 extruder: target=240 temp=239.9 pwm=0.483
Stats 791768.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3952413 bytes_read=1281733 bytes_retransmit=9 bytes_invalid=0 send_seq=90896 receive_seq=90896 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=865705 sysload=0.39 cputime=175.130 memavail=7291336 print_time=3302.757 buffer_time=2.380 print_stall=0 extruder: target=240 temp=240.0 pwm=0.435
Stats 791769.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3954531 bytes_read=1282251 bytes_retransmit=9 bytes_invalid=0 send_seq=90941 receive_seq=90941 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.500 sd_pos=866586 sysload=0.52 cputime=175.190 memavail=7290832 print_time=3303.629 buffer_time=2.251 print_stall=0 extruder: target=240 temp=240.1 pwm=0.377
Stats 791770.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3957183 bytes_read=1282804 bytes_retransmit=9 bytes_invalid=0 send_seq=90993 receive_seq=90993 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=867159 sysload=0.52 cputime=175.261 memavail=7290832 print_time=3304.647 buffer_time=2.269 print_stall=0 extruder: target=240 temp=240.1 pwm=0.402
Stats 791771.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3958993 bytes_read=1283286 bytes_retransmit=9 bytes_invalid=0 send_seq=91031 receive_seq=91031 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=867654 sysload=0.52 cputime=175.331 memavail=7292460 print_time=3305.488 buffer_time=2.109 print_stall=0 extruder: target=240 temp=239.9 pwm=0.468
Stats 791772.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3960539 bytes_read=1283734 bytes_retransmit=9 bytes_invalid=0 send_seq=91065 receive_seq=91065 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=80.0 pwm=0.402 sd_pos=868070 sysload=0.52 cputime=175.409 memavail=7292600 print_time=3306.456 buffer_time=2.077 print_stall=0 extruder: target=240 temp=239.9 pwm=0.471
Stats 791773.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3963287 bytes_read=1284292 bytes_retransmit=9 bytes_invalid=0 send_seq=91118 receive_seq=91118 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=869187 sysload=0.52 cputime=175.498 memavail=7292600 print_time=3307.555 buffer_time=2.174 print_stall=0 extruder: target=240 temp=239.8 pwm=0.471
Stats 791774.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3964559 bytes_read=1284755 bytes_retransmit=9 bytes_invalid=0 send_seq=91149 receive_seq=91149 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=869489 sysload=0.64 cputime=175.571 memavail=7292352 print_time=3308.387 buffer_time=2.005 print_stall=0 extruder: target=240 temp=240.0 pwm=0.424
Stats 791775.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3966023 bytes_read=1285193 bytes_retransmit=9 bytes_invalid=0 send_seq=91181 receive_seq=91181 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=870074 sysload=0.64 cputime=175.646 memavail=7292352 print_time=3309.736 buffer_time=2.353 print_stall=0 extruder: target=240 temp=239.8 pwm=0.496
Stats 791776.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3967112 bytes_read=1285611 bytes_retransmit=9 bytes_invalid=0 send_seq=91206 receive_seq=91206 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=870682 sysload=0.64 cputime=175.716 memavail=7290688 print_time=3310.511 buffer_time=2.127 print_stall=0 extruder: target=240 temp=239.8 pwm=0.523
Stats 791777.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3968709 bytes_read=1286078 bytes_retransmit=9 bytes_invalid=0 send_seq=91241 receive_seq=91241 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=871204 sysload=0.64 cputime=175.796 memavail=7290464 print_time=3311.657 buffer_time=2.272 print_stall=0 extruder: target=240 temp=239.9 pwm=0.496
Stats 791778.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3969744 bytes_read=1286486 bytes_retransmit=9 bytes_invalid=0 send_seq=91267 receive_seq=91267 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=871594 sysload=0.64 cputime=175.863 memavail=7290464 print_time=3312.480 buffer_time=2.093 print_stall=0 extruder: target=240 temp=240.2 pwm=0.342
Stats 791779.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3971188 bytes_read=1286954 bytes_retransmit=9 bytes_invalid=0 send_seq=91299 receive_seq=91299 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=80.0 pwm=0.391 sd_pos=872229 sysload=0.59 cputime=175.924 memavail=7290464 print_time=3313.787 buffer_time=2.400 print_stall=0 extruder: target=240 temp=240.0 pwm=0.411
Stats 791780.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3973466 bytes_read=1287476 bytes_retransmit=9 bytes_invalid=0 send_seq=91345 receive_seq=91345 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=80.0 pwm=0.503 sd_pos=872637 sysload=0.59 cputime=175.978 memavail=7290464 print_time=3314.676 buffer_time=2.288 print_stall=0 extruder: target=240 temp=239.8 pwm=0.548
Stats 791781.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3974881 bytes_read=1287909 bytes_retransmit=9 bytes_invalid=0 send_seq=91376 receive_seq=91376 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.0 pwm=0.517 sd_pos=873137 sysload=0.59 cputime=176.049 memavail=7290716 print_time=3315.390 buffer_time=2.001 print_stall=0 extruder: target=240 temp=239.8 pwm=0.503
Stats 791782.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3976924 bytes_read=1288407 bytes_retransmit=9 bytes_invalid=0 send_seq=91417 receive_seq=91417 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=873831 sysload=0.59 cputime=176.111 memavail=7290716 print_time=3316.648 buffer_time=2.258 print_stall=0 extruder: target=240 temp=239.8 pwm=0.506
Stats 791783.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=3979185 bytes_read=1288934 bytes_retransmit=9 bytes_invalid=0 send_seq=91464 receive_seq=91464 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992828 heater_bed: target=80 temp=80.0 pwm=0.360 sd_pos=874816 sysload=0.59 cputime=176.183 memavail=7290716 print_time=3317.613 buffer_time=2.222 print_stall=0 extruder: target=240 temp=239.7 pwm=0.576
Stats 791784.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3980471 bytes_read=1289377 bytes_retransmit=9 bytes_invalid=0 send_seq=91494 receive_seq=91494 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=875120 sysload=0.54 cputime=176.232 memavail=7290612 print_time=3318.410 buffer_time=2.019 print_stall=0 extruder: target=240 temp=239.9 pwm=0.419
Stats 791785.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3981731 bytes_read=1289810 bytes_retransmit=9 bytes_invalid=0 send_seq=91522 receive_seq=91522 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=875534 sysload=0.54 cputime=176.292 memavail=7288704 print_time=3319.800 buffer_time=2.408 print_stall=0 extruder: target=240 temp=240.0 pwm=0.400
Stats 791786.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3982598 bytes_read=1290212 bytes_retransmit=9 bytes_invalid=0 send_seq=91544 receive_seq=91544 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=875978 sysload=0.54 cputime=176.369 memavail=7293984 print_time=3320.540 buffer_time=2.148 print_stall=0 extruder: target=240 temp=240.2 pwm=0.400
Stats 791787.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3983814 bytes_read=1290635 bytes_retransmit=9 bytes_invalid=0 send_seq=91573 receive_seq=91573 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=876362 sysload=0.54 cputime=176.426 memavail=7296704 print_time=3321.323 buffer_time=1.930 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 791788.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3985189 bytes_read=1291083 bytes_retransmit=9 bytes_invalid=0 send_seq=91604 receive_seq=91604 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.0 pwm=0.512 sd_pos=876941 sysload=0.54 cputime=176.497 memavail=7294816 print_time=3322.541 buffer_time=2.148 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 791789.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3986223 bytes_read=1291520 bytes_retransmit=9 bytes_invalid=0 send_seq=91630 receive_seq=91630 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=877305 sysload=0.50 cputime=176.551 memavail=7294816 print_time=3323.405 buffer_time=2.010 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 791790.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3988321 bytes_read=1292008 bytes_retransmit=9 bytes_invalid=0 send_seq=91672 receive_seq=91672 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=877881 sysload=0.50 cputime=176.605 memavail=7294592 print_time=3324.536 buffer_time=2.141 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 791791.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3990515 bytes_read=1292526 bytes_retransmit=9 bytes_invalid=0 send_seq=91717 receive_seq=91717 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.0 pwm=0.574 sd_pos=878526 sysload=0.50 cputime=176.673 memavail=7294592 print_time=3325.582 buffer_time=2.185 print_stall=0 extruder: target=240 temp=239.9 pwm=0.520
Stats 791792.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3992106 bytes_read=1293003 bytes_retransmit=9 bytes_invalid=0 send_seq=91754 receive_seq=91754 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=879081 sysload=0.50 cputime=176.742 memavail=7294592 print_time=3326.496 buffer_time=2.098 print_stall=0 extruder: target=240 temp=240.1 pwm=0.373
Stats 791793.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3995216 bytes_read=1293586 bytes_retransmit=9 bytes_invalid=0 send_seq=91815 receive_seq=91815 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.381 sd_pos=879618 sysload=0.50 cputime=176.812 memavail=7294592 print_time=3327.734 buffer_time=2.335 print_stall=0 extruder: target=240 temp=239.8 pwm=0.527
Stats 791794.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3997505 bytes_read=1294074 bytes_retransmit=9 bytes_invalid=0 send_seq=91862 receive_seq=91851 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=880346 sysload=0.46 cputime=176.880 memavail=7293836 print_time=3328.916 buffer_time=2.518 print_stall=0 extruder: target=240 temp=240.0 pwm=0.431
Stats 791795.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3998402 bytes_read=1294536 bytes_retransmit=9 bytes_invalid=0 send_seq=91885 receive_seq=91885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=880734 sysload=0.46 cputime=176.942 memavail=7293584 print_time=3329.765 buffer_time=2.366 print_stall=0 extruder: target=240 temp=240.0 pwm=0.431
Stats 791796.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3999497 bytes_read=1294940 bytes_retransmit=9 bytes_invalid=0 send_seq=91911 receive_seq=91911 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=881094 sysload=0.46 cputime=177.008 memavail=7293584 print_time=3330.492 buffer_time=2.093 print_stall=0 extruder: target=240 temp=240.0 pwm=0.431
Stats 791797.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4000653 bytes_read=1295360 bytes_retransmit=9 bytes_invalid=0 send_seq=91938 receive_seq=91938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=881673 sysload=0.46 cputime=177.076 memavail=7293584 print_time=3331.515 buffer_time=2.115 print_stall=0 extruder: target=240 temp=240.0 pwm=0.431
Stats 791798.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4002388 bytes_read=1295837 bytes_retransmit=9 bytes_invalid=0 send_seq=91976 receive_seq=91976 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=882199 sysload=0.46 cputime=177.142 memavail=7293584 print_time=3332.432 buffer_time=2.031 print_stall=0 extruder: target=240 temp=239.9 pwm=0.424
Stats 791799.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4004033 bytes_read=1296310 bytes_retransmit=9 bytes_invalid=0 send_seq=92012 receive_seq=92012 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.335 sd_pos=882810 sysload=0.42 cputime=177.212 memavail=7293360 print_time=3333.926 buffer_time=2.526 print_stall=0 extruder: target=240 temp=239.9 pwm=0.449
Stats 791800.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4004976 bytes_read=1296723 bytes_retransmit=9 bytes_invalid=0 send_seq=92036 receive_seq=92036 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=883169 sysload=0.42 cputime=177.281 memavail=7293360 print_time=3334.682 buffer_time=2.280 print_stall=0 extruder: target=240 temp=239.9 pwm=0.414
Stats 791801.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4007900 bytes_read=1297310 bytes_retransmit=9 bytes_invalid=0 send_seq=92095 receive_seq=92095 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=883803 sysload=0.42 cputime=177.362 memavail=7293360 print_time=3335.809 buffer_time=2.406 print_stall=0 extruder: target=240 temp=240.3 pwm=0.366
Stats 791802.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4010037 bytes_read=1297803 bytes_retransmit=9 bytes_invalid=0 send_seq=92138 receive_seq=92138 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=884199 sysload=0.42 cputime=177.425 memavail=7293360 print_time=3336.512 buffer_time=2.109 print_stall=0 extruder: target=240 temp=240.3 pwm=0.351
Stats 791803.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4012485 bytes_read=1298331 bytes_retransmit=9 bytes_invalid=0 send_seq=92185 receive_seq=92185 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.523 sd_pos=884422 sysload=0.42 cputime=177.489 memavail=7293360 print_time=3337.421 buffer_time=2.017 print_stall=0 extruder: target=240 temp=240.0 pwm=0.442
Stats 791804.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4015644 bytes_read=1298944 bytes_retransmit=9 bytes_invalid=0 send_seq=92246 receive_seq=92246 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=884944 sysload=0.39 cputime=177.556 memavail=7293360 print_time=3338.610 buffer_time=2.206 print_stall=0 extruder: target=240 temp=240.0 pwm=0.500
Stats 791805.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4017461 bytes_read=1299407 bytes_retransmit=9 bytes_invalid=0 send_seq=92283 receive_seq=92283 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.523 sd_pos=885969 sysload=0.39 cputime=177.624 memavail=7293360 print_time=3339.460 buffer_time=2.056 print_stall=0 extruder: target=240 temp=239.7 pwm=0.500
Stats 791806.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4019682 bytes_read=1299920 bytes_retransmit=9 bytes_invalid=0 send_seq=92327 receive_seq=92327 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=886377 sysload=0.39 cputime=177.695 memavail=7293360 print_time=3340.527 buffer_time=2.123 print_stall=0 extruder: target=240 temp=240.0 pwm=0.444
Stats 791807.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4021212 bytes_read=1300382 bytes_retransmit=9 bytes_invalid=0 send_seq=92361 receive_seq=92361 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=886872 sysload=0.39 cputime=177.764 memavail=7293360 print_time=3341.927 buffer_time=2.521 print_stall=0 extruder: target=240 temp=240.0 pwm=0.436
Stats 791808.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4021887 bytes_read=1300760 bytes_retransmit=9 bytes_invalid=0 send_seq=92381 receive_seq=92381 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=887121 sysload=0.39 cputime=177.821 memavail=7293360 print_time=3342.654 buffer_time=2.247 print_stall=0 extruder: target=240 temp=239.9 pwm=0.436
Stats 791809.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4023403 bytes_read=1301233 bytes_retransmit=9 bytes_invalid=0 send_seq=92414 receive_seq=92414 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=887621 sysload=0.43 cputime=177.879 memavail=7293360 print_time=3343.628 buffer_time=2.221 print_stall=0 extruder: target=240 temp=240.1 pwm=0.385
Stats 791810.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4024402 bytes_read=1301655 bytes_retransmit=9 bytes_invalid=0 send_seq=92440 receive_seq=92440 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=888031 sysload=0.43 cputime=177.935 memavail=7293360 print_time=3344.496 buffer_time=2.088 print_stall=0 extruder: target=240 temp=239.8 pwm=0.527
Stats 791811.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4025661 bytes_read=1302088 bytes_retransmit=9 bytes_invalid=0 send_seq=92471 receive_seq=92471 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=888589 sysload=0.43 cputime=178.006 memavail=7293360 print_time=3345.513 buffer_time=2.104 print_stall=0 extruder: target=240 temp=240.0 pwm=0.471
Stats 791812.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4028491 bytes_read=1302646 bytes_retransmit=9 bytes_invalid=0 send_seq=92524 receive_seq=92524 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=889144 sysload=0.43 cputime=178.073 memavail=7293360 print_time=3346.944 buffer_time=2.534 print_stall=0 extruder: target=240 temp=239.9 pwm=0.471
Stats 791813.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4029651 bytes_read=1303083 bytes_retransmit=9 bytes_invalid=0 send_seq=92553 receive_seq=92553 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.513 sd_pos=889420 sysload=0.43 cputime=178.127 memavail=7293360 print_time=3347.522 buffer_time=2.111 print_stall=0 extruder: target=240 temp=240.2 pwm=0.333
Stats 791814.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4032514 bytes_read=1303661 bytes_retransmit=9 bytes_invalid=0 send_seq=92610 receive_seq=92610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.384 sd_pos=890004 sysload=0.48 cputime=178.190 memavail=7292856 print_time=3348.567 buffer_time=2.156 print_stall=0 extruder: target=240 temp=239.7 pwm=0.586
Stats 791815.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4034602 bytes_read=1304174 bytes_retransmit=9 bytes_invalid=0 send_seq=92654 receive_seq=92654 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=80.0 pwm=0.483 sd_pos=890388 sysload=0.48 cputime=178.258 memavail=7292868 print_time=3349.439 buffer_time=2.027 print_stall=0 extruder: target=240 temp=240.1 pwm=0.361
Stats 791816.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4036102 bytes_read=1304641 bytes_retransmit=9 bytes_invalid=0 send_seq=92689 receive_seq=92689 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=890554 sysload=0.48 cputime=178.315 memavail=7292868 print_time=3350.643 buffer_time=2.229 print_stall=0 extruder: target=240 temp=239.9 pwm=0.500
Stats 791817.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4038087 bytes_read=1305124 bytes_retransmit=9 bytes_invalid=0 send_seq=92730 receive_seq=92730 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=891124 sysload=0.48 cputime=178.379 memavail=7291532 print_time=3351.534 buffer_time=2.120 print_stall=0 extruder: target=240 temp=239.9 pwm=0.481
Stats 791818.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4041191 bytes_read=1305743 bytes_retransmit=9 bytes_invalid=0 send_seq=92793 receive_seq=92793 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=891650 sysload=0.48 cputime=178.446 memavail=7291580 print_time=3352.664 buffer_time=2.249 print_stall=0 extruder: target=240 temp=239.8 pwm=0.535
Stats 791819.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4043440 bytes_read=1306286 bytes_retransmit=9 bytes_invalid=0 send_seq=92840 receive_seq=92840 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.363 sd_pos=892412 sysload=0.60 cputime=178.510 memavail=7291580 print_time=3353.483 buffer_time=2.067 print_stall=0 extruder: target=240 temp=240.0 pwm=0.403
Stats 791820.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4044713 bytes_read=1306709 bytes_retransmit=9 bytes_invalid=0 send_seq=92869 receive_seq=92869 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=892671 sysload=0.60 cputime=178.566 memavail=7291580 print_time=3354.430 buffer_time=2.014 print_stall=0 extruder: target=240 temp=240.1 pwm=0.403
Stats 791821.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4045878 bytes_read=1307147 bytes_retransmit=9 bytes_invalid=0 send_seq=92898 receive_seq=92898 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=893060 sysload=0.60 cputime=178.627 memavail=7291356 print_time=3355.661 buffer_time=2.244 print_stall=0 extruder: target=240 temp=240.4 pwm=0.291
Stats 791822.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4046405 bytes_read=1307529 bytes_retransmit=9 bytes_invalid=0 send_seq=92916 receive_seq=92916 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=893225 sysload=0.60 cputime=178.683 memavail=7291356 print_time=3356.530 buffer_time=2.112 print_stall=0 extruder: target=240 temp=240.2 pwm=0.454
Stats 791823.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4047741 bytes_read=1307952 bytes_retransmit=9 bytes_invalid=0 send_seq=92945 receive_seq=92945 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=893666 sysload=0.60 cputime=178.741 memavail=7291356 print_time=3357.694 buffer_time=2.275 print_stall=0 extruder: target=240 temp=240.1 pwm=0.454
Stats 791824.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4048846 bytes_read=1308395 bytes_retransmit=9 bytes_invalid=0 send_seq=92972 receive_seq=92972 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=894057 sysload=0.55 cputime=178.808 memavail=7290852 print_time=3358.947 buffer_time=2.527 print_stall=0 extruder: target=240 temp=239.9 pwm=0.504
Stats 791825.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4049541 bytes_read=1308792 bytes_retransmit=9 bytes_invalid=0 send_seq=92993 receive_seq=92993 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992852 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=894226 sysload=0.55 cputime=178.865 memavail=7290892 print_time=3359.925 buffer_time=2.504 print_stall=0 extruder: target=240 temp=240.0 pwm=0.429
Stats 791826.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4051375 bytes_read=1309260 bytes_retransmit=9 bytes_invalid=0 send_seq=93031 receive_seq=93031 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992846 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=894554 sysload=0.55 cputime=178.918 memavail=7290892 print_time=3360.565 buffer_time=2.143 print_stall=0 extruder: target=240 temp=240.0 pwm=0.451
Stats 791827.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4055078 bytes_read=1309893 bytes_retransmit=9 bytes_invalid=0 send_seq=93099 receive_seq=93099 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=895465 sysload=0.55 cputime=178.986 memavail=7290892 print_time=3361.989 buffer_time=2.567 print_stall=0 extruder: target=240 temp=240.1 pwm=0.451
Stats 791828.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4056313 bytes_read=1310325 bytes_retransmit=9 bytes_invalid=0 send_seq=93127 receive_seq=93127 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=895575 sysload=0.55 cputime=179.044 memavail=7290892 print_time=3362.431 buffer_time=2.009 print_stall=0 extruder: target=240 temp=240.1 pwm=0.379
Stats 791829.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4057935 bytes_read=1310793 bytes_retransmit=9 bytes_invalid=0 send_seq=93162 receive_seq=93162 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992816 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=895977 sysload=0.51 cputime=179.105 memavail=7290892 print_time=3363.689 buffer_time=2.266 print_stall=0 extruder: target=240 temp=239.9 pwm=0.491
Stats 791830.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4059895 bytes_read=1311296 bytes_retransmit=9 bytes_invalid=0 send_seq=93204 receive_seq=93204 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=80.0 pwm=0.449 sd_pos=896385 sysload=0.51 cputime=179.172 memavail=7290892 print_time=3364.850 buffer_time=2.426 print_stall=0 extruder: target=240 temp=239.9 pwm=0.462
Stats 791831.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4061677 bytes_read=1311788 bytes_retransmit=9 bytes_invalid=0 send_seq=93244 receive_seq=93244 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=80.0 pwm=0.512 sd_pos=896719 sysload=0.51 cputime=179.244 memavail=7290892 print_time=3365.734 buffer_time=2.309 print_stall=0 extruder: target=240 temp=239.8 pwm=0.507
Stats 791832.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4064301 bytes_read=1312319 bytes_retransmit=9 bytes_invalid=0 send_seq=93296 receive_seq=93296 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=897188 sysload=0.51 cputime=179.314 memavail=7290892 print_time=3366.552 buffer_time=2.126 print_stall=0 extruder: target=240 temp=240.0 pwm=0.413
Stats 791833.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4066960 bytes_read=1312864 bytes_retransmit=9 bytes_invalid=0 send_seq=93348 receive_seq=93348 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=898088 sysload=0.51 cputime=179.402 memavail=7290892 print_time=3367.690 buffer_time=2.262 print_stall=0 extruder: target=240 temp=240.0 pwm=0.484
Stats 791834.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4068407 bytes_read=1313343 bytes_retransmit=9 bytes_invalid=0 send_seq=93383 receive_seq=93383 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=898476 sysload=0.47 cputime=179.471 memavail=7290136 print_time=3368.715 buffer_time=2.286 print_stall=0 extruder: target=240 temp=240.2 pwm=0.344
Stats 791835.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4069590 bytes_read=1313766 bytes_retransmit=9 bytes_invalid=0 send_seq=93412 receive_seq=93412 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=898807 sysload=0.47 cputime=179.532 memavail=7290140 print_time=3369.835 buffer_time=2.405 print_stall=0 extruder: target=240 temp=240.0 pwm=0.483
Stats 791836.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4070460 bytes_read=1314179 bytes_retransmit=9 bytes_invalid=0 send_seq=93436 receive_seq=93436 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=899169 sysload=0.47 cputime=179.595 memavail=7289692 print_time=3370.623 buffer_time=2.193 print_stall=0 extruder: target=240 temp=240.2 pwm=0.369
Stats 791837.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4071816 bytes_read=1314631 bytes_retransmit=9 bytes_invalid=0 send_seq=93468 receive_seq=93468 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=899499 sysload=0.47 cputime=179.661 memavail=7289944 print_time=3371.517 buffer_time=2.086 print_stall=0 extruder: target=240 temp=239.9 pwm=0.442
Stats 791838.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4072978 bytes_read=1315049 bytes_retransmit=9 bytes_invalid=0 send_seq=93496 receive_seq=93496 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992808 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=900054 sysload=0.47 cputime=179.719 memavail=7289944 print_time=3372.618 buffer_time=2.186 print_stall=0 extruder: target=240 temp=239.9 pwm=0.455
Stats 791839.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=4074286 bytes_read=1315507 bytes_retransmit=9 bytes_invalid=0 send_seq=93526 receive_seq=93526 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=900492 sysload=0.43 cputime=179.780 memavail=7289944 print_time=3373.750 buffer_time=2.318 print_stall=0 extruder: target=240 temp=239.9 pwm=0.440
Stats 791840.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=4076280 bytes_read=1316009 bytes_retransmit=9 bytes_invalid=0 send_seq=93568 receive_seq=93568 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=900935 sysload=0.43 cputime=179.842 memavail=7289944 print_time=3374.668 buffer_time=2.235 print_stall=0 extruder: target=240 temp=240.0 pwm=0.391
Stats 791841.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=4078174 bytes_read=1316487 bytes_retransmit=9 bytes_invalid=0 send_seq=93608 receive_seq=93608 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.394 sd_pos=901514 sysload=0.43 cputime=179.903 memavail=7289944 print_time=3375.561 buffer_time=2.128 print_stall=0 extruder: target=240 temp=240.3 pwm=0.275
Stats 791842.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=4081197 bytes_read=1317070 bytes_retransmit=9 bytes_invalid=0 send_seq=93666 receive_seq=93666 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=901978 sysload=0.43 cputime=179.971 memavail=7289944 print_time=3376.662 buffer_time=2.228 print_stall=0 extruder: target=240 temp=240.1 pwm=0.405
Stats 791843.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=4082728 bytes_read=1317537 bytes_retransmit=9 bytes_invalid=0 send_seq=93701 receive_seq=93701 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=80.0 pwm=0.370 sd_pos=902170 sysload=0.43 cputime=180.034 memavail=7289944 print_time=3377.736 buffer_time=2.302 print_stall=0 extruder: target=240 temp=239.8 pwm=0.515
Stats 791844.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4083736 bytes_read=1317955 bytes_retransmit=9 bytes_invalid=0 send_seq=93726 receive_seq=93726 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=80.0 pwm=0.497 sd_pos=902309 sysload=0.48 cputime=180.083 memavail=7289868 print_time=3378.653 buffer_time=2.219 print_stall=0 extruder: target=240 temp=240.1 pwm=0.348
Stats 791845.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4084794 bytes_read=1318383 bytes_retransmit=9 bytes_invalid=0 send_seq=93753 receive_seq=93753 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.0 pwm=0.521 sd_pos=902503 sysload=0.48 cputime=180.141 memavail=7289972 print_time=3379.459 buffer_time=2.024 print_stall=0 extruder: target=240 temp=239.9 pwm=0.466
Stats 791846.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4088172 bytes_read=1318995 bytes_retransmit=9 bytes_invalid=0 send_seq=93817 receive_seq=93817 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=902963 sysload=0.48 cputime=180.209 memavail=7289972 print_time=3380.824 buffer_time=2.389 print_stall=0 extruder: target=240 temp=240.1 pwm=0.391
Stats 791847.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4090711 bytes_read=1319518 bytes_retransmit=9 bytes_invalid=0 send_seq=93866 receive_seq=93866 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992872 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=903892 sysload=0.48 cputime=180.294 memavail=7291088 print_time=3381.878 buffer_time=2.442 print_stall=0 extruder: target=240 temp=240.2 pwm=0.391
Stats 791848.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4091697 bytes_read=1319936 bytes_retransmit=9 bytes_invalid=0 send_seq=93891 receive_seq=93891 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=904002 sysload=0.48 cputime=180.364 memavail=7291244 print_time=3382.493 buffer_time=2.057 print_stall=0 extruder: target=240 temp=240.4 pwm=0.361
Stats 791849.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4092998 bytes_read=1320393 bytes_retransmit=9 bytes_invalid=0 send_seq=93921 receive_seq=93921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=904483 sysload=0.44 cputime=180.420 memavail=7291244 print_time=3383.550 buffer_time=2.114 print_stall=0 extruder: target=240 temp=239.9 pwm=0.515
Stats 791850.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4094148 bytes_read=1320806 bytes_retransmit=9 bytes_invalid=0 send_seq=93948 receive_seq=93948 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=80.0 pwm=0.548 sd_pos=904823 sysload=0.44 cputime=180.499 memavail=7291244 print_time=3384.470 buffer_time=2.032 print_stall=0 extruder: target=240 temp=240.1 pwm=0.378
Stats 791851.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4096490 bytes_read=1321334 bytes_retransmit=9 bytes_invalid=0 send_seq=93995 receive_seq=93995 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=905319 sysload=0.44 cputime=180.567 memavail=7291244 print_time=3385.759 buffer_time=2.321 print_stall=0 extruder: target=240 temp=240.1 pwm=0.378
Stats 791852.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4098227 bytes_read=1321811 bytes_retransmit=9 bytes_invalid=0 send_seq=94032 receive_seq=94032 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=905820 sysload=0.44 cputime=180.629 memavail=7291244 print_time=3386.470 buffer_time=2.031 print_stall=0 extruder: target=240 temp=240.0 pwm=0.439
Stats 791853.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4100716 bytes_read=1322334 bytes_retransmit=9 bytes_invalid=0 send_seq=94081 receive_seq=94081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=80 temp=80.0 pwm=0.481 sd_pos=906422 sysload=0.44 cputime=180.707 memavail=7291244 print_time=3387.482 buffer_time=2.042 print_stall=0 extruder: target=240 temp=240.0 pwm=0.439
Stats 791854.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4103785 bytes_read=1322947 bytes_retransmit=9 bytes_invalid=0 send_seq=94142 receive_seq=94142 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=906911 sysload=0.40 cputime=180.787 memavail=7290488 print_time=3389.204 buffer_time=2.761 print_stall=0 extruder: target=240 temp=239.7 pwm=0.574
Stats 791855.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4104982 bytes_read=1323389 bytes_retransmit=9 bytes_invalid=0 send_seq=94172 receive_seq=94172 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=907298 sysload=0.40 cputime=180.854 memavail=7290488 print_time=3390.040 buffer_time=2.597 print_stall=0 extruder: target=240 temp=239.9 pwm=0.443
Stats 791856.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4105753 bytes_read=1323782 bytes_retransmit=9 bytes_invalid=0 send_seq=94195 receive_seq=94195 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=907588 sysload=0.40 cputime=180.921 memavail=7290488 print_time=3390.771 buffer_time=2.326 print_stall=0 extruder: target=240 temp=240.0 pwm=0.414
Stats 791857.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4107889 bytes_read=1324300 bytes_retransmit=9 bytes_invalid=0 send_seq=94240 receive_seq=94240 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=908041 sysload=0.40 cputime=180.997 memavail=7290488 print_time=3392.017 buffer_time=2.572 print_stall=0 extruder: target=240 temp=240.0 pwm=0.413
Stats 791858.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4110481 bytes_read=1324852 bytes_retransmit=9 bytes_invalid=0 send_seq=94292 receive_seq=94292 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=80.0 pwm=0.394 sd_pos=908555 sysload=0.40 cputime=181.068 memavail=7290488 print_time=3393.081 buffer_time=2.635 print_stall=0 extruder: target=240 temp=240.2 pwm=0.338
Stats 791859.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4111735 bytes_read=1325295 bytes_retransmit=9 bytes_invalid=0 send_seq=94322 receive_seq=94322 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=909151 sysload=0.37 cputime=181.135 memavail=7290488 print_time=3393.620 buffer_time=2.173 print_stall=0 extruder: target=240 temp=239.8 pwm=0.531
Stats 791860.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4114207 bytes_read=1325843 bytes_retransmit=9 bytes_invalid=0 send_seq=94373 receive_seq=94373 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=80 temp=80.0 pwm=0.485 sd_pos=909574 sysload=0.37 cputime=181.213 memavail=7290488 print_time=3394.579 buffer_time=2.132 print_stall=0 extruder: target=240 temp=240.1 pwm=0.351
Stats 791861.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4115335 bytes_read=1326275 bytes_retransmit=9 bytes_invalid=0 send_seq=94401 receive_seq=94401 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.367 sd_pos=909932 sysload=0.37 cputime=181.277 memavail=7290488 print_time=3395.681 buffer_time=2.233 print_stall=0 extruder: target=240 temp=239.9 pwm=0.447
Stats 791862.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4116844 bytes_read=1326718 bytes_retransmit=9 bytes_invalid=0 send_seq=94434 receive_seq=94434 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=910320 sysload=0.37 cputime=181.341 memavail=7290488 print_time=3396.582 buffer_time=2.134 print_stall=0 extruder: target=240 temp=239.9 pwm=0.447
Stats 791863.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4119250 bytes_read=1327251 bytes_retransmit=9 bytes_invalid=0 send_seq=94482 receive_seq=94482 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=910845 sysload=0.37 cputime=181.406 memavail=7290488 print_time=3397.847 buffer_time=2.398 print_stall=0 extruder: target=240 temp=240.1 pwm=0.331
Stats 791864.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4120809 bytes_read=1327733 bytes_retransmit=9 bytes_invalid=0 send_seq=94517 receive_seq=94517 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.1 pwm=0.434 sd_pos=911289 sysload=0.34 cputime=181.471 memavail=7291228 print_time=3398.573 buffer_time=2.124 print_stall=0 extruder: target=240 temp=240.2 pwm=0.362
Stats 791865.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4123088 bytes_read=1328231 bytes_retransmit=9 bytes_invalid=0 send_seq=94561 receive_seq=94561 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.637 sd_pos=911681 sysload=0.34 cputime=181.536 memavail=7291252 print_time=3399.507 buffer_time=2.057 print_stall=0 extruder: target=240 temp=240.2 pwm=0.365
Stats 791866.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4125157 bytes_read=1328739 bytes_retransmit=9 bytes_invalid=0 send_seq=94604 receive_seq=94604 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=911978 sysload=0.34 cputime=181.597 memavail=7291252 print_time=3400.572 buffer_time=2.122 print_stall=0 extruder: target=240 temp=239.8 pwm=0.541
Stats 791867.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4126534 bytes_read=1329190 bytes_retransmit=9 bytes_invalid=0 send_seq=94636 receive_seq=94636 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=912336 sysload=0.34 cputime=181.654 memavail=7291252 print_time=3401.719 buffer_time=2.268 print_stall=0 extruder: target=240 temp=239.9 pwm=0.392
Stats 791868.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4127848 bytes_read=1329606 bytes_retransmit=9 bytes_invalid=0 send_seq=94665 receive_seq=94665 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=912750 sysload=0.34 cputime=181.712 memavail=7291252 print_time=3402.718 buffer_time=2.266 print_stall=0 extruder: target=240 temp=240.0 pwm=0.458
Stats 791869.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4129658 bytes_read=1330096 bytes_retransmit=9 bytes_invalid=0 send_seq=94703 receive_seq=94703 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=913109 sysload=0.31 cputime=181.782 memavail=7291252 print_time=3403.785 buffer_time=2.334 print_stall=0 extruder: target=240 temp=240.0 pwm=0.399
Stats 791870.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4131466 bytes_read=1330586 bytes_retransmit=9 bytes_invalid=0 send_seq=94743 receive_seq=94743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=913448 sysload=0.31 cputime=181.847 memavail=7291252 print_time=3404.697 buffer_time=2.245 print_stall=0 extruder: target=240 temp=240.1 pwm=0.350
Stats 791871.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4134518 bytes_read=1331154 bytes_retransmit=9 bytes_invalid=0 send_seq=94801 receive_seq=94801 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.1 pwm=0.414 sd_pos=914381 sysload=0.31 cputime=181.926 memavail=7291028 print_time=3405.899 buffer_time=2.446 print_stall=0 extruder: target=240 temp=239.9 pwm=0.496
Stats 791872.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4135517 bytes_read=1331577 bytes_retransmit=9 bytes_invalid=0 send_seq=94827 receive_seq=94827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.1 pwm=0.414 sd_pos=914520 sysload=0.31 cputime=181.983 memavail=7291028 print_time=3406.479 buffer_time=2.026 print_stall=0 extruder: target=240 temp=240.1 pwm=0.388
Stats 791873.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4137274 bytes_read=1332054 bytes_retransmit=9 bytes_invalid=0 send_seq=94864 receive_seq=94864 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.507 sd_pos=915042 sysload=0.31 cputime=182.062 memavail=7291028 print_time=3408.067 buffer_time=2.613 print_stall=0 extruder: target=240 temp=240.0 pwm=0.399
Stats 791874.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4138123 bytes_read=1332467 bytes_retransmit=9 bytes_invalid=0 send_seq=94888 receive_seq=94888 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.519 sd_pos=915290 sysload=0.37 cputime=182.119 memavail=7290524 print_time=3408.926 buffer_time=2.472 print_stall=0 extruder: target=240 temp=240.0 pwm=0.438
Stats 791875.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4140250 bytes_read=1332980 bytes_retransmit=9 bytes_invalid=0 send_seq=94932 receive_seq=94932 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=915676 sysload=0.37 cputime=182.185 memavail=7290780 print_time=3409.706 buffer_time=2.250 print_stall=0 extruder: target=240 temp=240.1 pwm=0.438
Stats 791876.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4142368 bytes_read=1333487 bytes_retransmit=9 bytes_invalid=0 send_seq=94975 receive_seq=94975 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=916260 sysload=0.37 cputime=182.251 memavail=7290780 print_time=3410.661 buffer_time=2.205 print_stall=0 extruder: target=240 temp=240.1 pwm=0.379
Stats 791877.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4144537 bytes_read=1333980 bytes_retransmit=9 bytes_invalid=0 send_seq=95018 receive_seq=95018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=916612 sysload=0.37 cputime=182.318 memavail=7293812 print_time=3411.830 buffer_time=2.373 print_stall=0 extruder: target=240 temp=240.2 pwm=0.437
Stats 791878.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4145691 bytes_read=1334432 bytes_retransmit=9 bytes_invalid=0 send_seq=95047 receive_seq=95047 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=916844 sysload=0.37 cputime=182.377 memavail=7293480 print_time=3412.666 buffer_time=2.208 print_stall=0 extruder: target=240 temp=239.9 pwm=0.498
Stats 791879.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4146845 bytes_read=1334881 bytes_retransmit=9 bytes_invalid=0 send_seq=95076 receive_seq=95076 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=917151 sysload=0.34 cputime=182.439 memavail=7293480 print_time=3413.498 buffer_time=2.039 print_stall=0 extruder: target=240 temp=240.2 pwm=0.318
Stats 791880.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4149366 bytes_read=1335404 bytes_retransmit=9 bytes_invalid=0 send_seq=95125 receive_seq=95125 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.534 sd_pos=917661 sysload=0.34 cputime=182.504 memavail=7293480 print_time=3414.799 buffer_time=2.340 print_stall=0 extruder: target=240 temp=239.7 pwm=0.549
Stats 791881.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4151669 bytes_read=1335956 bytes_retransmit=9 bytes_invalid=0 send_seq=95174 receive_seq=95174 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=79.9 pwm=0.548 sd_pos=918362 sysload=0.34 cputime=182.577 memavail=7293480 print_time=3415.673 buffer_time=2.212 print_stall=0 extruder: target=240 temp=240.0 pwm=0.422
Stats 791882.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4153434 bytes_read=1336429 bytes_retransmit=9 bytes_invalid=0 send_seq=95213 receive_seq=95213 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=918667 sysload=0.34 cputime=182.645 memavail=7293480 print_time=3416.908 buffer_time=2.446 print_stall=0 extruder: target=240 temp=240.0 pwm=0.413
Stats 791883.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4154719 bytes_read=1336857 bytes_retransmit=9 bytes_invalid=0 send_seq=95243 receive_seq=95243 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=919000 sysload=0.34 cputime=182.700 memavail=7293480 print_time=3417.670 buffer_time=2.207 print_stall=0 extruder: target=240 temp=240.1 pwm=0.406
Stats 791884.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4155816 bytes_read=1337319 bytes_retransmit=9 bytes_invalid=0 send_seq=95271 receive_seq=95271 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=919307 sysload=0.31 cputime=182.761 memavail=7292976 print_time=3418.593 buffer_time=2.129 print_stall=0 extruder: target=240 temp=239.9 pwm=0.485
Stats 791885.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4158153 bytes_read=1337827 bytes_retransmit=9 bytes_invalid=0 send_seq=95317 receive_seq=95317 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=919747 sysload=0.31 cputime=182.815 memavail=7292980 print_time=3419.506 buffer_time=2.041 print_stall=0 extruder: target=240 temp=240.1 pwm=0.388
Stats 791886.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4160809 bytes_read=1338360 bytes_retransmit=9 bytes_invalid=0 send_seq=95368 receive_seq=95368 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=920263 sysload=0.31 cputime=182.876 memavail=7292980 print_time=3420.692 buffer_time=2.226 print_stall=0 extruder: target=240 temp=240.0 pwm=0.392
Stats 791887.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4162086 bytes_read=1338812 bytes_retransmit=9 bytes_invalid=0 send_seq=95397 receive_seq=95397 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=80.0 pwm=0.494 sd_pos=920592 sysload=0.31 cputime=182.944 memavail=7292980 print_time=3421.630 buffer_time=2.163 print_stall=0 extruder: target=240 temp=240.1 pwm=0.392
Stats 791888.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4163507 bytes_read=1339260 bytes_retransmit=9 bytes_invalid=0 send_seq=95431 receive_seq=95431 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=80.0 pwm=0.536 sd_pos=921009 sysload=0.31 cputime=183.002 memavail=7292980 print_time=3422.588 buffer_time=2.120 print_stall=0 extruder: target=240 temp=239.9 pwm=0.465
Stats 791889.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4165890 bytes_read=1339788 bytes_retransmit=9 bytes_invalid=0 send_seq=95478 receive_seq=95478 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.536 sd_pos=921614 sysload=0.29 cputime=183.076 memavail=7292980 print_time=3424.178 buffer_time=2.709 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 791890.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4166899 bytes_read=1340230 bytes_retransmit=9 bytes_invalid=0 send_seq=95505 receive_seq=95505 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=921782 sysload=0.29 cputime=183.138 memavail=7292980 print_time=3424.529 buffer_time=2.060 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 791891.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4169786 bytes_read=1340793 bytes_retransmit=9 bytes_invalid=0 send_seq=95562 receive_seq=95562 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=922600 sysload=0.29 cputime=183.222 memavail=7292980 print_time=3425.917 buffer_time=2.447 print_stall=0 extruder: target=240 temp=240.1 pwm=0.369
Stats 791892.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4170645 bytes_read=1341181 bytes_retransmit=9 bytes_invalid=0 send_seq=95584 receive_seq=95584 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.490 sd_pos=922795 sysload=0.29 cputime=183.280 memavail=7292980 print_time=3426.546 buffer_time=2.075 print_stall=0 extruder: target=240 temp=240.3 pwm=0.369
Stats 791893.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4172110 bytes_read=1341658 bytes_retransmit=9 bytes_invalid=0 send_seq=95618 receive_seq=95618 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=923238 sysload=0.29 cputime=183.346 memavail=7292980 print_time=3427.616 buffer_time=2.144 print_stall=0 extruder: target=240 temp=240.0 pwm=0.452
Stats 791894.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4174677 bytes_read=1342211 bytes_retransmit=9 bytes_invalid=0 send_seq=95670 receive_seq=95670 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=923737 sysload=0.26 cputime=183.411 memavail=7292232 print_time=3428.932 buffer_time=2.458 print_stall=0 extruder: target=240 temp=240.2 pwm=0.326
Stats 791895.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4175751 bytes_read=1342614 bytes_retransmit=9 bytes_invalid=0 send_seq=95695 receive_seq=95695 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.0 pwm=0.491 sd_pos=924098 sysload=0.26 cputime=183.471 memavail=7292232 print_time=3429.479 buffer_time=2.005 print_stall=0 extruder: target=240 temp=240.2 pwm=0.347
Stats 791896.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4178762 bytes_read=1343211 bytes_retransmit=9 bytes_invalid=0 send_seq=95753 receive_seq=95753 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=924693 sysload=0.26 cputime=183.537 memavail=7292008 print_time=3431.154 buffer_time=2.678 print_stall=0 extruder: target=240 temp=240.1 pwm=0.408
Stats 791897.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4179921 bytes_read=1343629 bytes_retransmit=9 bytes_invalid=0 send_seq=95781 receive_seq=95781 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.524 sd_pos=924993 sysload=0.26 cputime=183.589 memavail=7292008 print_time=3431.843 buffer_time=2.366 print_stall=0 extruder: target=240 temp=239.9 pwm=0.469
Stats 791898.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4180914 bytes_read=1344032 bytes_retransmit=9 bytes_invalid=0 send_seq=95806 receive_seq=95806 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=925244 sysload=0.26 cputime=183.644 memavail=7292008 print_time=3432.689 buffer_time=2.212 print_stall=0 extruder: target=240 temp=239.8 pwm=0.455
Stats 791899.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4182753 bytes_read=1344554 bytes_retransmit=9 bytes_invalid=0 send_seq=95846 receive_seq=95846 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.348 sd_pos=925657 sysload=0.24 cputime=183.709 memavail=7292008 print_time=3433.630 buffer_time=2.152 print_stall=0 extruder: target=240 temp=239.8 pwm=0.476
Stats 791900.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4185575 bytes_read=1345107 bytes_retransmit=9 bytes_invalid=0 send_seq=95901 receive_seq=95901 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=926446 sysload=0.24 cputime=183.771 memavail=7292008 print_time=3434.783 buffer_time=2.305 print_stall=0 extruder: target=240 temp=239.9 pwm=0.414
Stats 791901.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4186769 bytes_read=1345545 bytes_retransmit=9 bytes_invalid=0 send_seq=95930 receive_seq=95930 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=926585 sysload=0.24 cputime=183.820 memavail=7291784 print_time=3435.851 buffer_time=2.372 print_stall=0 extruder: target=240 temp=240.3 pwm=0.322
Stats 791902.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4187780 bytes_read=1345962 bytes_retransmit=9 bytes_invalid=0 send_seq=95955 receive_seq=95955 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.490 sd_pos=926832 sysload=0.24 cputime=183.870 memavail=7291784 print_time=3436.646 buffer_time=2.166 print_stall=0 extruder: target=240 temp=240.3 pwm=0.323
Stats 791903.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4188743 bytes_read=1346363 bytes_retransmit=9 bytes_invalid=0 send_seq=95980 receive_seq=95980 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.0 pwm=0.507 sd_pos=927055 sysload=0.24 cputime=183.925 memavail=7291784 print_time=3437.567 buffer_time=2.086 print_stall=0 extruder: target=240 temp=239.9 pwm=0.498
Stats 791904.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4191188 bytes_read=1346908 bytes_retransmit=9 bytes_invalid=0 send_seq=96029 receive_seq=96029 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=927576 sysload=0.22 cputime=183.991 memavail=7291784 print_time=3438.859 buffer_time=2.377 print_stall=0 extruder: target=240 temp=239.9 pwm=0.433
Stats 791905.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4193163 bytes_read=1347409 bytes_retransmit=9 bytes_invalid=0 send_seq=96072 receive_seq=96072 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.494 sd_pos=927842 sysload=0.22 cputime=184.057 memavail=7291788 print_time=3439.602 buffer_time=2.119 print_stall=0 extruder: target=240 temp=239.9 pwm=0.421
Stats 791906.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4194770 bytes_read=1347867 bytes_retransmit=9 bytes_invalid=0 send_seq=96108 receive_seq=96108 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=80.0 pwm=0.509 sd_pos=928144 sysload=0.22 cputime=184.125 memavail=7292876 print_time=3441.064 buffer_time=2.581 print_stall=0 extruder: target=240 temp=240.1 pwm=0.419
Stats 791907.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4195384 bytes_read=1348260 bytes_retransmit=9 bytes_invalid=0 send_seq=96128 receive_seq=96128 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=928255 sysload=0.22 cputime=184.188 memavail=7292888 print_time=3441.464 buffer_time=1.980 print_stall=0 extruder: target=240 temp=239.9 pwm=0.498
Stats 791908.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4197382 bytes_read=1348762 bytes_retransmit=9 bytes_invalid=0 send_seq=96170 receive_seq=96170 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.497 sd_pos=928703 sysload=0.22 cputime=184.249 memavail=7292888 print_time=3442.964 buffer_time=2.480 print_stall=0 extruder: target=240 temp=240.1 pwm=0.405
Stats 791909.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4198672 bytes_read=1349200 bytes_retransmit=9 bytes_invalid=0 send_seq=96199 receive_seq=96199 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=929341 sysload=0.20 cputime=184.315 memavail=7292888 print_time=3443.646 buffer_time=2.161 print_stall=0 extruder: target=240 temp=240.0 pwm=0.405
Stats 791910.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4200790 bytes_read=1349703 bytes_retransmit=9 bytes_invalid=0 send_seq=96241 receive_seq=96241 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=929536 sysload=0.20 cputime=184.382 memavail=7292888 print_time=3444.526 buffer_time=2.040 print_stall=0 extruder: target=240 temp=239.8 pwm=0.506
Stats 791911.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4201704 bytes_read=1350115 bytes_retransmit=9 bytes_invalid=0 send_seq=96265 receive_seq=96265 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=80.0 pwm=0.499 sd_pos=929784 sysload=0.20 cputime=184.442 memavail=7292888 print_time=3445.543 buffer_time=2.056 print_stall=0 extruder: target=240 temp=239.9 pwm=0.463
Stats 791912.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4203198 bytes_read=1350563 bytes_retransmit=9 bytes_invalid=0 send_seq=96299 receive_seq=96299 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=930055 sysload=0.20 cputime=184.506 memavail=7292888 print_time=3446.876 buffer_time=2.389 print_stall=0 extruder: target=240 temp=240.1 pwm=0.421
Stats 791913.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4204634 bytes_read=1351011 bytes_retransmit=9 bytes_invalid=0 send_seq=96330 receive_seq=96330 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=930274 sysload=0.20 cputime=184.563 memavail=7292888 print_time=3447.487 buffer_time=1.999 print_stall=0 extruder: target=240 temp=240.1 pwm=0.397
Stats 791914.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4207911 bytes_read=1351623 bytes_retransmit=9 bytes_invalid=0 send_seq=96391 receive_seq=96391 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.0 pwm=0.531 sd_pos=930923 sysload=0.19 cputime=184.629 memavail=7292636 print_time=3448.950 buffer_time=2.462 print_stall=0 extruder: target=240 temp=240.0 pwm=0.456
Stats 791915.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4208780 bytes_read=1352016 bytes_retransmit=9 bytes_invalid=0 send_seq=96414 receive_seq=96414 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=931005 sysload=0.19 cputime=184.685 memavail=7292640 print_time=3449.629 buffer_time=2.140 print_stall=0 extruder: target=240 temp=239.8 pwm=0.535
Stats 791916.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4210010 bytes_read=1352454 bytes_retransmit=9 bytes_invalid=0 send_seq=96443 receive_seq=96443 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=79.9 pwm=0.554 sd_pos=931278 sysload=0.19 cputime=184.747 memavail=7292640 print_time=3450.744 buffer_time=2.255 print_stall=0 extruder: target=240 temp=240.0 pwm=0.391
Stats 791917.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4210743 bytes_read=1352851 bytes_retransmit=9 bytes_invalid=0 send_seq=96464 receive_seq=96464 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=79.9 pwm=0.485 sd_pos=931471 sysload=0.19 cputime=184.805 memavail=7292640 print_time=3451.544 buffer_time=2.055 print_stall=0 extruder: target=240 temp=239.9 pwm=0.448
Stats 791918.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4213005 bytes_read=1353364 bytes_retransmit=9 bytes_invalid=0 send_seq=96511 receive_seq=96511 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=931884 sysload=0.19 cputime=184.871 memavail=7292416 print_time=3452.641 buffer_time=2.151 print_stall=0 extruder: target=240 temp=240.2 pwm=0.310
Stats 791919.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4215731 bytes_read=1353937 bytes_retransmit=9 bytes_invalid=0 send_seq=96564 receive_seq=96564 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=79.9 pwm=0.507 sd_pos=932594 sysload=0.33 cputime=184.945 memavail=7292416 print_time=3454.018 buffer_time=2.526 print_stall=0 extruder: target=240 temp=240.1 pwm=0.372
Stats 791920.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4216525 bytes_read=1354349 bytes_retransmit=9 bytes_invalid=0 send_seq=96588 receive_seq=96588 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=932732 sysload=0.33 cputime=185.005 memavail=7292416 print_time=3454.595 buffer_time=2.103 print_stall=0 extruder: target=240 temp=240.0 pwm=0.404
Stats 791921.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4217807 bytes_read=1354767 bytes_retransmit=9 bytes_invalid=0 send_seq=96616 receive_seq=96616 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.358 sd_pos=933165 sysload=0.33 cputime=185.076 memavail=7292416 print_time=3455.657 buffer_time=2.164 print_stall=0 extruder: target=240 temp=240.0 pwm=0.404
Stats 791922.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4220245 bytes_read=1355300 bytes_retransmit=9 bytes_invalid=0 send_seq=96664 receive_seq=96664 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=933636 sysload=0.33 cputime=185.151 memavail=7292416 print_time=3456.903 buffer_time=2.410 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 791923.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4221975 bytes_read=1355777 bytes_retransmit=9 bytes_invalid=0 send_seq=96701 receive_seq=96701 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=934076 sysload=0.33 cputime=185.219 memavail=7292416 print_time=3457.646 buffer_time=2.153 print_stall=0 extruder: target=240 temp=240.0 pwm=0.440
Stats 791924.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4224216 bytes_read=1356295 bytes_retransmit=9 bytes_invalid=0 send_seq=96746 receive_seq=96746 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=934372 sysload=0.31 cputime=185.286 memavail=7292164 print_time=3458.549 buffer_time=2.056 print_stall=0 extruder: target=240 temp=239.8 pwm=0.491
Stats 791925.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4225761 bytes_read=1356758 bytes_retransmit=9 bytes_invalid=0 send_seq=96780 receive_seq=96780 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.503 sd_pos=934786 sysload=0.31 cputime=185.353 memavail=7292172 print_time=3459.777 buffer_time=2.283 print_stall=0 extruder: target=240 temp=239.9 pwm=0.465
Stats 791926.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4226883 bytes_read=1357190 bytes_retransmit=9 bytes_invalid=0 send_seq=96808 receive_seq=96808 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.575 sd_pos=935176 sysload=0.31 cputime=185.417 memavail=7292172 print_time=3460.844 buffer_time=2.349 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 791927.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4228373 bytes_read=1357638 bytes_retransmit=9 bytes_invalid=0 send_seq=96842 receive_seq=96842 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=935394 sysload=0.31 cputime=185.480 memavail=7292172 print_time=3461.545 buffer_time=2.049 print_stall=0 extruder: target=240 temp=240.1 pwm=0.386
Stats 791928.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4230557 bytes_read=1358146 bytes_retransmit=9 bytes_invalid=0 send_seq=96885 receive_seq=96885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=936209 sysload=0.31 cputime=185.546 memavail=7292172 print_time=3462.613 buffer_time=2.116 print_stall=0 extruder: target=240 temp=240.1 pwm=0.386
Stats 791929.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4232643 bytes_read=1358678 bytes_retransmit=9 bytes_invalid=0 send_seq=96930 receive_seq=96930 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=936450 sysload=0.28 cputime=185.606 memavail=7292172 print_time=3463.572 buffer_time=2.074 print_stall=0 extruder: target=240 temp=239.8 pwm=0.479
Stats 791930.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4233974 bytes_read=1359111 bytes_retransmit=9 bytes_invalid=0 send_seq=96961 receive_seq=96961 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=936895 sysload=0.28 cputime=185.664 memavail=7292172 print_time=3464.846 buffer_time=2.348 print_stall=0 extruder: target=240 temp=240.0 pwm=0.426
Stats 791931.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4235146 bytes_read=1359544 bytes_retransmit=9 bytes_invalid=0 send_seq=96989 receive_seq=96989 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=937144 sysload=0.28 cputime=185.725 memavail=7292172 print_time=3465.764 buffer_time=2.266 print_stall=0 extruder: target=240 temp=240.1 pwm=0.352
Stats 791932.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4237502 bytes_read=1360086 bytes_retransmit=9 bytes_invalid=0 send_seq=97039 receive_seq=97039 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=937585 sysload=0.28 cputime=185.791 memavail=7292172 print_time=3466.716 buffer_time=2.217 print_stall=0 extruder: target=240 temp=240.0 pwm=0.436
Stats 791933.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4240376 bytes_read=1360644 bytes_retransmit=9 bytes_invalid=0 send_seq=97095 receive_seq=97095 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.550 sd_pos=938130 sysload=0.28 cputime=185.857 memavail=7292172 print_time=3467.854 buffer_time=2.354 print_stall=0 extruder: target=240 temp=240.2 pwm=0.352
Stats 791934.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4241233 bytes_read=1361062 bytes_retransmit=9 bytes_invalid=0 send_seq=97117 receive_seq=97117 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=938346 sysload=0.42 cputime=185.920 memavail=7292320 print_time=3468.629 buffer_time=2.128 print_stall=0 extruder: target=240 temp=240.1 pwm=0.459
Stats 791935.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4242450 bytes_read=1361499 bytes_retransmit=9 bytes_invalid=0 send_seq=97146 receive_seq=97146 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=938702 sysload=0.42 cputime=185.975 memavail=7293188 print_time=3469.537 buffer_time=2.035 print_stall=0 extruder: target=240 temp=239.9 pwm=0.475
Stats 791936.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4244619 bytes_read=1361997 bytes_retransmit=9 bytes_invalid=0 send_seq=97190 receive_seq=97190 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=939166 sysload=0.42 cputime=186.037 memavail=7292964 print_time=3471.108 buffer_time=2.605 print_stall=0 extruder: target=240 temp=239.8 pwm=0.494
Stats 791937.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4245731 bytes_read=1362430 bytes_retransmit=9 bytes_invalid=0 send_seq=97218 receive_seq=97218 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=939361 sysload=0.42 cputime=186.094 memavail=7293112 print_time=3471.489 buffer_time=1.986 print_stall=0 extruder: target=240 temp=239.8 pwm=0.507
Stats 791938.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4248498 bytes_read=1362992 bytes_retransmit=9 bytes_invalid=0 send_seq=97272 receive_seq=97272 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=940131 sysload=0.42 cputime=186.166 memavail=7293188 print_time=3472.933 buffer_time=2.429 print_stall=0 extruder: target=240 temp=239.9 pwm=0.431
Stats 791939.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4249261 bytes_read=1363396 bytes_retransmit=9 bytes_invalid=0 send_seq=97295 receive_seq=97295 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=940307 sysload=0.38 cputime=186.217 memavail=7293188 print_time=3473.705 buffer_time=2.201 print_stall=0 extruder: target=240 temp=240.1 pwm=0.384
Stats 791940.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4250112 bytes_read=1363806 bytes_retransmit=9 bytes_invalid=0 send_seq=97318 receive_seq=97318 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=940529 sysload=0.38 cputime=186.270 memavail=7293188 print_time=3474.514 buffer_time=2.009 print_stall=0 extruder: target=240 temp=240.1 pwm=0.385
Stats 791941.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4251788 bytes_read=1364284 bytes_retransmit=9 bytes_invalid=0 send_seq=97356 receive_seq=97356 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=940831 sysload=0.38 cputime=186.330 memavail=7293188 print_time=3475.574 buffer_time=2.068 print_stall=0 extruder: target=240 temp=240.1 pwm=0.396
Stats 791942.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4253935 bytes_read=1364782 bytes_retransmit=9 bytes_invalid=0 send_seq=97400 receive_seq=97400 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=941301 sysload=0.38 cputime=186.393 memavail=7293188 print_time=3476.637 buffer_time=2.131 print_stall=0 extruder: target=240 temp=240.2 pwm=0.318
Stats 791943.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4255908 bytes_read=1365285 bytes_retransmit=9 bytes_invalid=0 send_seq=97442 receive_seq=97442 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.0 pwm=0.522 sd_pos=941487 sysload=0.38 cputime=186.453 memavail=7293188 print_time=3477.661 buffer_time=2.155 print_stall=0 extruder: target=240 temp=240.1 pwm=0.390
Stats 791944.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4257126 bytes_read=1365737 bytes_retransmit=9 bytes_invalid=0 send_seq=97471 receive_seq=97471 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.512 sd_pos=941764 sysload=0.35 cputime=186.506 memavail=7292712 print_time=3478.777 buffer_time=2.269 print_stall=0 extruder: target=240 temp=239.9 pwm=0.526
Stats 791945.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4257889 bytes_read=1366120 bytes_retransmit=9 bytes_invalid=0 send_seq=97492 receive_seq=97492 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=79.9 pwm=0.512 sd_pos=941927 sysload=0.35 cputime=186.556 memavail=7292716 print_time=3479.576 buffer_time=2.068 print_stall=0 extruder: target=240 temp=240.0 pwm=0.397
Stats 791946.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4260268 bytes_read=1366648 bytes_retransmit=9 bytes_invalid=0 send_seq=97539 receive_seq=97539 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.0 pwm=0.512 sd_pos=942369 sysload=0.35 cputime=186.625 memavail=7292716 print_time=3480.731 buffer_time=2.223 print_stall=0 extruder: target=240 temp=239.9 pwm=0.429
Stats 791947.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4262662 bytes_read=1367180 bytes_retransmit=9 bytes_invalid=0 send_seq=97587 receive_seq=97587 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=943022 sysload=0.35 cputime=186.692 memavail=7292716 print_time=3481.867 buffer_time=2.359 print_stall=0 extruder: target=240 temp=240.1 pwm=0.372
Stats 791948.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4263352 bytes_read=1367548 bytes_retransmit=9 bytes_invalid=0 send_seq=97605 receive_seq=97605 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=943106 sysload=0.35 cputime=186.745 memavail=7292716 print_time=3482.541 buffer_time=2.032 print_stall=0 extruder: target=240 temp=240.2 pwm=0.342
Stats 791949.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4264481 bytes_read=1367991 bytes_retransmit=9 bytes_invalid=0 send_seq=97632 receive_seq=97632 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=79.9 pwm=0.448 sd_pos=943407 sysload=0.33 cputime=186.810 memavail=7292716 print_time=3483.722 buffer_time=2.213 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 791950.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4266336 bytes_read=1368483 bytes_retransmit=9 bytes_invalid=0 send_seq=97672 receive_seq=97672 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=80.0 pwm=0.392 sd_pos=943792 sysload=0.33 cputime=186.873 memavail=7292716 print_time=3484.849 buffer_time=2.334 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 791951.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4267714 bytes_read=1368916 bytes_retransmit=9 bytes_invalid=0 send_seq=97703 receive_seq=97703 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.392 sd_pos=944095 sysload=0.33 cputime=186.944 memavail=7292716 print_time=3485.562 buffer_time=2.040 print_stall=0 extruder: target=240 temp=240.0 pwm=0.454
Stats 791952.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4269612 bytes_read=1369399 bytes_retransmit=9 bytes_invalid=0 send_seq=97741 receive_seq=97741 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.357 sd_pos=944333 sysload=0.33 cputime=187.012 memavail=7292716 print_time=3486.609 buffer_time=2.085 print_stall=0 extruder: target=240 temp=240.1 pwm=0.388
Stats 791953.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4270891 bytes_read=1369841 bytes_retransmit=9 bytes_invalid=0 send_seq=97771 receive_seq=97771 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=79.9 pwm=0.552 sd_pos=944693 sysload=0.33 cputime=187.077 memavail=7292716 print_time=3487.735 buffer_time=2.211 print_stall=0 extruder: target=240 temp=240.1 pwm=0.394
Stats 791954.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4271633 bytes_read=1370234 bytes_retransmit=9 bytes_invalid=0 send_seq=97791 receive_seq=97791 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=944915 sysload=0.30 cputime=187.129 memavail=7292716 print_time=3488.537 buffer_time=2.011 print_stall=0 extruder: target=240 temp=239.9 pwm=0.478
Stats 791955.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4273965 bytes_read=1370777 bytes_retransmit=9 bytes_invalid=0 send_seq=97841 receive_seq=97841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=945383 sysload=0.30 cputime=187.205 memavail=7292720 print_time=3489.661 buffer_time=2.131 print_stall=0 extruder: target=240 temp=240.1 pwm=0.359
Stats 791956.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4276678 bytes_read=1371349 bytes_retransmit=9 bytes_invalid=0 send_seq=97897 receive_seq=97897 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.481 sd_pos=946149 sysload=0.30 cputime=187.288 memavail=7292496 print_time=3490.988 buffer_time=2.457 print_stall=0 extruder: target=240 temp=239.9 pwm=0.471
Stats 791957.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4277627 bytes_read=1371747 bytes_retransmit=9 bytes_invalid=0 send_seq=97921 receive_seq=97921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=80 temp=80.0 pwm=0.481 sd_pos=946342 sysload=0.30 cputime=187.348 memavail=7292272 print_time=3491.650 buffer_time=2.117 print_stall=0 extruder: target=240 temp=240.0 pwm=0.408
Stats 791958.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4278976 bytes_read=1372200 bytes_retransmit=9 bytes_invalid=0 send_seq=97953 receive_seq=97953 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=946813 sysload=0.30 cputime=187.418 memavail=7292272 print_time=3492.658 buffer_time=2.118 print_stall=0 extruder: target=240 temp=240.0 pwm=0.438
Stats 791959.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4281036 bytes_read=1372717 bytes_retransmit=9 bytes_invalid=0 send_seq=97995 receive_seq=97995 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=947257 sysload=0.27 cputime=187.486 memavail=7292272 print_time=3493.780 buffer_time=2.240 print_stall=0 extruder: target=240 temp=240.0 pwm=0.477
Stats 791960.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4284075 bytes_read=1373290 bytes_retransmit=9 bytes_invalid=0 send_seq=98054 receive_seq=98054 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=947938 sysload=0.27 cputime=187.553 memavail=7292272 print_time=3494.892 buffer_time=2.352 print_stall=0 extruder: target=240 temp=240.0 pwm=0.397
Stats 791961.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4285396 bytes_read=1373733 bytes_retransmit=9 bytes_invalid=0 send_seq=98084 receive_seq=98084 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=948246 sysload=0.27 cputime=187.621 memavail=7292272 print_time=3495.805 buffer_time=2.263 print_stall=0 extruder: target=240 temp=240.1 pwm=0.397
Stats 791962.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4286647 bytes_read=1374180 bytes_retransmit=9 bytes_invalid=0 send_seq=98115 receive_seq=98115 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.0 pwm=0.523 sd_pos=948604 sysload=0.27 cputime=187.683 memavail=7292048 print_time=3496.718 buffer_time=2.175 print_stall=0 extruder: target=240 temp=240.1 pwm=0.400
Stats 791963.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4288922 bytes_read=1374628 bytes_retransmit=9 bytes_invalid=0 send_seq=98161 receive_seq=98149 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=395 upcoming_bytes=0 freq=119992747 heater_bed: target=80 temp=80.0 pwm=0.525 sd_pos=949211 sysload=0.27 cputime=187.748 memavail=7292048 print_time=3498.392 buffer_time=2.847 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 791964.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4290170 bytes_read=1375156 bytes_retransmit=9 bytes_invalid=0 send_seq=98193 receive_seq=98193 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=949406 sysload=0.25 cputime=187.802 memavail=7291796 print_time=3498.641 buffer_time=2.096 print_stall=0 extruder: target=240 temp=240.2 pwm=0.306
Stats 791965.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4292962 bytes_read=1375723 bytes_retransmit=9 bytes_invalid=0 send_seq=98248 receive_seq=98248 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.528 sd_pos=950333 sysload=0.25 cputime=187.873 memavail=7291796 print_time=3500.036 buffer_time=2.489 print_stall=0 extruder: target=240 temp=240.0 pwm=0.395
Stats 791966.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4293884 bytes_read=1376121 bytes_retransmit=9 bytes_invalid=0 send_seq=98272 receive_seq=98272 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=950443 sysload=0.25 cputime=187.936 memavail=7291796 print_time=3500.656 buffer_time=2.108 print_stall=0 extruder: target=240 temp=240.2 pwm=0.326
Stats 791967.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4295173 bytes_read=1376554 bytes_retransmit=9 bytes_invalid=0 send_seq=98300 receive_seq=98300 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=950886 sysload=0.25 cputime=188.008 memavail=7291348 print_time=3501.738 buffer_time=2.189 print_stall=0 extruder: target=240 temp=239.9 pwm=0.426
Stats 791968.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4297584 bytes_read=1377091 bytes_retransmit=9 bytes_invalid=0 send_seq=98349 receive_seq=98349 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=951353 sysload=0.25 cputime=188.074 memavail=7291524 print_time=3502.966 buffer_time=2.416 print_stall=0 extruder: target=240 temp=239.9 pwm=0.447
Stats 791969.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4298957 bytes_read=1377539 bytes_retransmit=9 bytes_invalid=0 send_seq=98380 receive_seq=98380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=951631 sysload=0.31 cputime=188.131 memavail=7291448 print_time=3503.597 buffer_time=2.047 print_stall=0 extruder: target=240 temp=239.8 pwm=0.447
Stats 791970.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4301218 bytes_read=1378057 bytes_retransmit=9 bytes_invalid=0 send_seq=98425 receive_seq=98425 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=952039 sysload=0.31 cputime=188.194 memavail=7291552 print_time=3504.855 buffer_time=2.303 print_stall=0 extruder: target=240 temp=239.9 pwm=0.447
Stats 791971.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4302452 bytes_read=1378504 bytes_retransmit=9 bytes_invalid=0 send_seq=98456 receive_seq=98456 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=80.0 pwm=0.510 sd_pos=952370 sysload=0.31 cputime=188.259 memavail=7291552 print_time=3505.800 buffer_time=2.248 print_stall=0 extruder: target=240 temp=240.2 pwm=0.356
Stats 791972.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4303553 bytes_read=1378912 bytes_retransmit=9 bytes_invalid=0 send_seq=98482 receive_seq=98482 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=79.9 pwm=0.510 sd_pos=952731 sysload=0.31 cputime=188.319 memavail=7291552 print_time=3506.630 buffer_time=2.078 print_stall=0 extruder: target=240 temp=240.1 pwm=0.374
Stats 791973.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4305990 bytes_read=1379450 bytes_retransmit=9 bytes_invalid=0 send_seq=98531 receive_seq=98531 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.392 sd_pos=953202 sysload=0.31 cputime=188.390 memavail=7291552 print_time=3507.804 buffer_time=2.250 print_stall=0 extruder: target=240 temp=240.1 pwm=0.432
Stats 791974.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4308611 bytes_read=1380022 bytes_retransmit=9 bytes_invalid=0 send_seq=98584 receive_seq=98584 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.501 sd_pos=953956 sysload=0.37 cputime=188.461 memavail=7291224 print_time=3508.900 buffer_time=2.346 print_stall=0 extruder: target=240 temp=240.0 pwm=0.412
Stats 791975.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4310062 bytes_read=1380460 bytes_retransmit=9 bytes_invalid=0 send_seq=98617 receive_seq=98617 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.513 sd_pos=954204 sysload=0.37 cputime=188.529 memavail=7294404 print_time=3510.189 buffer_time=2.634 print_stall=0 extruder: target=240 temp=239.8 pwm=0.514
Stats 791976.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4311260 bytes_read=1380895 bytes_retransmit=9 bytes_invalid=0 send_seq=98647 receive_seq=98647 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=954535 sysload=0.37 cputime=188.598 memavail=7294180 print_time=3510.970 buffer_time=2.414 print_stall=0 extruder: target=240 temp=240.0 pwm=0.422
Stats 791977.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4311864 bytes_read=1381278 bytes_retransmit=9 bytes_invalid=0 send_seq=98666 receive_seq=98666 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=954702 sysload=0.37 cputime=188.661 memavail=7293928 print_time=3511.645 buffer_time=2.088 print_stall=0 extruder: target=240 temp=239.8 pwm=0.494
Stats 791978.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4314340 bytes_read=1381806 bytes_retransmit=9 bytes_invalid=0 send_seq=98716 receive_seq=98716 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=955141 sysload=0.37 cputime=188.726 memavail=7293928 print_time=3512.810 buffer_time=2.253 print_stall=0 extruder: target=240 temp=239.9 pwm=0.486
Stats 791979.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4316901 bytes_read=1382388 bytes_retransmit=9 bytes_invalid=0 send_seq=98768 receive_seq=98768 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=11 freq=119992771 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=955602 sysload=0.34 cputime=188.797 memavail=7293928 print_time=3513.895 buffer_time=2.337 print_stall=0 extruder: target=240 temp=240.2 pwm=0.353
Stats 791980.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4318057 bytes_read=1382806 bytes_retransmit=9 bytes_invalid=0 send_seq=98796 receive_seq=98796 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.433 sd_pos=955907 sysload=0.34 cputime=188.856 memavail=7293928 print_time=3514.997 buffer_time=2.439 print_stall=0 extruder: target=240 temp=240.2 pwm=0.392
Stats 791981.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4319515 bytes_read=1383249 bytes_retransmit=9 bytes_invalid=0 send_seq=98829 receive_seq=98829 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.515 sd_pos=956268 sysload=0.34 cputime=188.925 memavail=7293928 print_time=3516.002 buffer_time=2.443 print_stall=0 extruder: target=240 temp=240.0 pwm=0.450
Stats 791982.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4321473 bytes_read=1383761 bytes_retransmit=9 bytes_invalid=0 send_seq=98870 receive_seq=98870 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=956623 sysload=0.34 cputime=188.992 memavail=7293928 print_time=3517.094 buffer_time=2.534 print_stall=0 extruder: target=240 temp=239.9 pwm=0.450
Stats 791983.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4323150 bytes_read=1384229 bytes_retransmit=9 bytes_invalid=0 send_seq=98908 receive_seq=98908 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=957088 sysload=0.34 cputime=189.069 memavail=7293928 print_time=3517.828 buffer_time=2.267 print_stall=0 extruder: target=240 temp=239.9 pwm=0.431
Stats 791984.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4325133 bytes_read=1384727 bytes_retransmit=9 bytes_invalid=0 send_seq=98949 receive_seq=98949 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=957715 sysload=0.31 cputime=189.132 memavail=7293320 print_time=3518.626 buffer_time=2.065 print_stall=0 extruder: target=240 temp=239.9 pwm=0.431
Stats 791985.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4326605 bytes_read=1385199 bytes_retransmit=9 bytes_invalid=0 send_seq=98982 receive_seq=98982 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.0 pwm=0.481 sd_pos=958017 sysload=0.31 cputime=189.201 memavail=7294184 print_time=3519.911 buffer_time=2.348 print_stall=0 extruder: target=240 temp=240.2 pwm=0.327
Stats 791986.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4327556 bytes_read=1385602 bytes_retransmit=9 bytes_invalid=0 send_seq=99007 receive_seq=99007 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=80 temp=80.0 pwm=0.481 sd_pos=958403 sysload=0.31 cputime=189.265 memavail=7294184 print_time=3520.669 buffer_time=2.106 print_stall=0 extruder: target=240 temp=239.9 pwm=0.507
Stats 791987.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4328807 bytes_read=1386030 bytes_retransmit=9 bytes_invalid=0 send_seq=99037 receive_seq=99037 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=958733 sysload=0.31 cputime=189.334 memavail=7294184 print_time=3521.691 buffer_time=2.127 print_stall=0 extruder: target=240 temp=240.3 pwm=0.329
Stats 791988.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4331258 bytes_read=1386582 bytes_retransmit=9 bytes_invalid=0 send_seq=99086 receive_seq=99086 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.445 sd_pos=959205 sysload=0.31 cputime=189.408 memavail=7294184 print_time=3522.648 buffer_time=2.082 print_stall=0 extruder: target=240 temp=240.0 pwm=0.425
Stats 791989.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4333842 bytes_read=1387135 bytes_retransmit=9 bytes_invalid=0 send_seq=99138 receive_seq=99138 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=959715 sysload=0.29 cputime=189.471 memavail=7294184 print_time=3523.679 buffer_time=2.112 print_stall=0 extruder: target=240 temp=239.7 pwm=0.559
Stats 791990.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4335982 bytes_read=1387628 bytes_retransmit=9 bytes_invalid=0 send_seq=99181 receive_seq=99181 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=959981 sysload=0.29 cputime=189.529 memavail=7294184 print_time=3524.631 buffer_time=2.062 print_stall=0 extruder: target=240 temp=239.8 pwm=0.501
Stats 791991.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4337543 bytes_read=1388115 bytes_retransmit=9 bytes_invalid=0 send_seq=99217 receive_seq=99217 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.501 sd_pos=960368 sysload=0.29 cputime=189.599 memavail=7294184 print_time=3525.947 buffer_time=2.377 print_stall=0 extruder: target=240 temp=239.8 pwm=0.504
Stats 791992.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4338541 bytes_read=1388523 bytes_retransmit=9 bytes_invalid=0 send_seq=99243 receive_seq=99243 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=80.0 pwm=0.504 sd_pos=960730 sysload=0.29 cputime=189.658 memavail=7294184 print_time=3526.705 buffer_time=2.134 print_stall=0 extruder: target=240 temp=240.0 pwm=0.431
Stats 791993.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4340579 bytes_read=1389011 bytes_retransmit=9 bytes_invalid=0 send_seq=99285 receive_seq=99285 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=961145 sysload=0.29 cputime=189.717 memavail=7294184 print_time=3527.840 buffer_time=2.269 print_stall=0 extruder: target=240 temp=240.3 pwm=0.291
Stats 791994.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4342469 bytes_read=1389528 bytes_retransmit=9 bytes_invalid=0 send_seq=99324 receive_seq=99324 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=961635 sysload=0.34 cputime=189.781 memavail=7293932 print_time=3528.790 buffer_time=2.217 print_stall=0 extruder: target=240 temp=240.3 pwm=0.327
Stats 791995.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4345158 bytes_read=1390071 bytes_retransmit=9 bytes_invalid=0 send_seq=99377 receive_seq=99377 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992798 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=962368 sysload=0.34 cputime=189.842 memavail=7294448 print_time=3530.066 buffer_time=2.493 print_stall=0 extruder: target=240 temp=240.1 pwm=0.422
Stats 791996.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4346219 bytes_read=1390479 bytes_retransmit=9 bytes_invalid=0 send_seq=99403 receive_seq=99403 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=962673 sysload=0.34 cputime=189.895 memavail=7294448 print_time=3530.873 buffer_time=2.299 print_stall=0 extruder: target=240 temp=239.9 pwm=0.488
Stats 791997.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4347476 bytes_read=1390936 bytes_retransmit=9 bytes_invalid=0 send_seq=99433 receive_seq=99433 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=963032 sysload=0.34 cputime=189.958 memavail=7292860 print_time=3531.711 buffer_time=2.136 print_stall=0 extruder: target=240 temp=239.9 pwm=0.468
Stats 791998.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4348850 bytes_read=1391374 bytes_retransmit=9 bytes_invalid=0 send_seq=99465 receive_seq=99465 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.0 pwm=0.536 sd_pos=963598 sysload=0.34 cputime=190.017 memavail=7292936 print_time=3532.583 buffer_time=2.007 print_stall=0 extruder: target=240 temp=239.9 pwm=0.465
Stats 791999.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4351733 bytes_read=1391953 bytes_retransmit=9 bytes_invalid=0 send_seq=99520 receive_seq=99520 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=964144 sysload=0.31 cputime=190.079 memavail=7292936 print_time=3533.817 buffer_time=2.240 print_stall=0 extruder: target=240 temp=240.0 pwm=0.415
Stats 792000.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4354629 bytes_read=1392545 bytes_retransmit=9 bytes_invalid=0 send_seq=99577 receive_seq=99577 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992868 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=964671 sysload=0.31 cputime=190.153 memavail=7292936 print_time=3535.015 buffer_time=2.437 print_stall=0 extruder: target=240 temp=240.0 pwm=0.402
Stats 792001.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4356076 bytes_read=1392988 bytes_retransmit=9 bytes_invalid=0 send_seq=99610 receive_seq=99610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=965048 sysload=0.31 cputime=190.216 memavail=7292684 print_time=3536.077 buffer_time=2.499 print_stall=0 extruder: target=240 temp=240.0 pwm=0.404
Stats 792002.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4357120 bytes_read=1393411 bytes_retransmit=9 bytes_invalid=0 send_seq=99636 receive_seq=99636 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=965318 sysload=0.31 cputime=190.274 memavail=7292684 print_time=3536.852 buffer_time=2.273 print_stall=0 extruder: target=240 temp=240.1 pwm=0.404
Stats 792003.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4358160 bytes_read=1393838 bytes_retransmit=9 bytes_invalid=0 send_seq=99663 receive_seq=99663 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=965652 sysload=0.31 cputime=190.332 memavail=7292684 print_time=3537.729 buffer_time=2.149 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 792004.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4360163 bytes_read=1394336 bytes_retransmit=9 bytes_invalid=0 send_seq=99704 receive_seq=99704 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=966281 sysload=0.29 cputime=190.398 memavail=7292684 print_time=3538.618 buffer_time=2.037 print_stall=0 extruder: target=240 temp=239.8 pwm=0.466
Stats 792005.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4362761 bytes_read=1394879 bytes_retransmit=9 bytes_invalid=0 send_seq=99754 receive_seq=99754 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992843 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=966753 sysload=0.29 cputime=190.476 memavail=7292184 print_time=3539.887 buffer_time=2.305 print_stall=0 extruder: target=240 temp=239.8 pwm=0.478
Stats 792006.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4365467 bytes_read=1395446 bytes_retransmit=9 bytes_invalid=0 send_seq=99809 receive_seq=99809 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=967604 sysload=0.29 cputime=190.558 memavail=7292184 print_time=3540.968 buffer_time=2.386 print_stall=0 extruder: target=240 temp=239.9 pwm=0.459
Stats 792007.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4366657 bytes_read=1395869 bytes_retransmit=9 bytes_invalid=0 send_seq=99838 receive_seq=99838 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=968005 sysload=0.29 cputime=190.618 memavail=7292184 print_time=3541.822 buffer_time=2.240 print_stall=0 extruder: target=240 temp=240.0 pwm=0.388
Stats 792008.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4368151 bytes_read=1396332 bytes_retransmit=9 bytes_invalid=0 send_seq=99872 receive_seq=99872 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=968594 sysload=0.29 cputime=190.684 memavail=7292184 print_time=3543.008 buffer_time=2.426 print_stall=0 extruder: target=240 temp=240.0 pwm=0.388
Stats 792009.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4369099 bytes_read=1396779 bytes_retransmit=9 bytes_invalid=0 send_seq=99900 receive_seq=99900 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992861 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=968953 sysload=0.27 cputime=190.747 memavail=7292184 print_time=3543.770 buffer_time=2.187 print_stall=0 extruder: target=240 temp=239.8 pwm=0.529
Stats 792010.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4370368 bytes_read=1397207 bytes_retransmit=9 bytes_invalid=0 send_seq=99930 receive_seq=99930 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=969391 sysload=0.27 cputime=190.801 memavail=7292184 print_time=3544.672 buffer_time=2.088 print_stall=0 extruder: target=240 temp=239.8 pwm=0.430
Stats 792011.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4371691 bytes_read=1397641 bytes_retransmit=9 bytes_invalid=0 send_seq=99960 receive_seq=99960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=970057 sysload=0.27 cputime=190.876 memavail=7292216 print_time=3546.030 buffer_time=2.445 print_stall=0 extruder: target=240 temp=239.9 pwm=0.424
Stats 792012.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4372725 bytes_read=1398055 bytes_retransmit=9 bytes_invalid=0 send_seq=99986 receive_seq=99986 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119992825 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=970447 sysload=0.27 cputime=190.935 memavail=7292216 print_time=3546.904 buffer_time=2.318 print_stall=0 extruder: target=240 temp=240.1 pwm=0.335
Stats 792013.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4375101 bytes_read=1398573 bytes_retransmit=9 bytes_invalid=0 send_seq=100034 receive_seq=100034 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=970833 sysload=0.27 cputime=190.988 memavail=7292216 print_time=3547.799 buffer_time=2.212 print_stall=0 extruder: target=240 temp=240.0 pwm=0.431
Stats 792014.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4377359 bytes_read=1399101 bytes_retransmit=9 bytes_invalid=0 send_seq=100078 receive_seq=100078 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.0 pwm=0.582 sd_pos=971267 sysload=0.24 cputime=191.046 memavail=7292216 print_time=3548.664 buffer_time=2.076 print_stall=0 extruder: target=240 temp=239.7 pwm=0.579
Stats 792015.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4379368 bytes_read=1399603 bytes_retransmit=9 bytes_invalid=0 send_seq=100120 receive_seq=100120 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=80.0 pwm=0.386 sd_pos=971543 sysload=0.24 cputime=191.105 memavail=7291464 print_time=3549.649 buffer_time=2.060 print_stall=0 extruder: target=240 temp=240.0 pwm=0.400
Stats 792016.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4382800 bytes_read=1400216 bytes_retransmit=9 bytes_invalid=0 send_seq=100187 receive_seq=100187 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.579 sd_pos=971862 sysload=0.24 cputime=191.171 memavail=7291464 print_time=3550.976 buffer_time=2.387 print_stall=0 extruder: target=240 temp=239.9 pwm=0.481
Stats 792017.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4384747 bytes_read=1400714 bytes_retransmit=9 bytes_invalid=0 send_seq=100228 receive_seq=100228 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=972445 sysload=0.24 cputime=191.230 memavail=7291240 print_time=3551.812 buffer_time=2.222 print_stall=0 extruder: target=240 temp=240.1 pwm=0.386
Stats 792018.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4387363 bytes_read=1401261 bytes_retransmit=9 bytes_invalid=0 send_seq=100279 receive_seq=100279 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=973184 sysload=0.24 cputime=191.306 memavail=7291240 print_time=3553.071 buffer_time=2.480 print_stall=0 extruder: target=240 temp=240.2 pwm=0.332
Stats 792019.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4387898 bytes_read=1401650 bytes_retransmit=9 bytes_invalid=0 send_seq=100298 receive_seq=100298 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=79.9 pwm=0.545 sd_pos=973381 sysload=0.22 cputime=191.356 memavail=7291240 print_time=3553.984 buffer_time=2.392 print_stall=0 extruder: target=240 temp=239.7 pwm=0.563
Stats 792020.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4389329 bytes_read=1402103 bytes_retransmit=9 bytes_invalid=0 send_seq=100330 receive_seq=100330 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992846 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=973932 sysload=0.22 cputime=191.424 memavail=7291240 print_time=3555.520 buffer_time=2.928 print_stall=0 extruder: target=240 temp=239.6 pwm=0.565
Stats 792021.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4390311 bytes_read=1402540 bytes_retransmit=9 bytes_invalid=0 send_seq=100359 receive_seq=100359 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.0 pwm=0.501 sd_pos=974181 sysload=0.22 cputime=191.481 memavail=7291240 print_time=3556.133 buffer_time=2.540 print_stall=0 extruder: target=240 temp=240.0 pwm=0.375
Stats 792022.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4391056 bytes_read=1402923 bytes_retransmit=9 bytes_invalid=0 send_seq=100380 receive_seq=100380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=974433 sysload=0.22 cputime=191.531 memavail=7291240 print_time=3557.094 buffer_time=2.499 print_stall=0 extruder: target=240 temp=240.3 pwm=0.291
Stats 792023.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4391776 bytes_read=1403321 bytes_retransmit=9 bytes_invalid=0 send_seq=100401 receive_seq=100401 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=974597 sysload=0.22 cputime=191.581 memavail=7291240 print_time=3557.598 buffer_time=2.003 print_stall=0 extruder: target=240 temp=240.2 pwm=0.378
Stats 792024.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4392656 bytes_read=1403753 bytes_retransmit=9 bytes_invalid=0 send_seq=100426 receive_seq=100426 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=80.0 pwm=0.508 sd_pos=974981 sysload=0.21 cputime=191.638 memavail=7291240 print_time=3558.718 buffer_time=2.122 print_stall=0 extruder: target=240 temp=240.1 pwm=0.418
Stats 792025.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4395462 bytes_read=1404301 bytes_retransmit=9 bytes_invalid=0 send_seq=100480 receive_seq=100480 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=975622 sysload=0.21 cputime=191.696 memavail=7290740 print_time=3559.683 buffer_time=2.086 print_stall=0 extruder: target=240 temp=239.9 pwm=0.532
Stats 792026.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4398973 bytes_read=1404924 bytes_retransmit=9 bytes_invalid=0 send_seq=100546 receive_seq=100546 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=976379 sysload=0.21 cputime=191.759 memavail=7287576 print_time=3560.837 buffer_time=2.240 print_stall=0 extruder: target=240 temp=239.9 pwm=0.465
Stats 792027.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4400144 bytes_read=1405351 bytes_retransmit=9 bytes_invalid=0 send_seq=100573 receive_seq=100573 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=976722 sysload=0.21 cputime=191.841 memavail=7290712 print_time=3561.659 buffer_time=2.061 print_stall=0 extruder: target=240 temp=239.9 pwm=0.450
Stats 792028.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4402608 bytes_read=1405884 bytes_retransmit=9 bytes_invalid=0 send_seq=100624 receive_seq=100624 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=977180 sysload=0.21 cputime=191.889 memavail=7290488 print_time=3562.752 buffer_time=2.153 print_stall=0 extruder: target=240 temp=240.0 pwm=0.412
Stats 792029.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4405202 bytes_read=1406443 bytes_retransmit=9 bytes_invalid=0 send_seq=100674 receive_seq=100674 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=977598 sysload=0.19 cputime=191.961 memavail=7290648 print_time=3563.635 buffer_time=2.036 print_stall=0 extruder: target=240 temp=240.3 pwm=0.300
Stats 792030.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4407394 bytes_read=1406955 bytes_retransmit=9 bytes_invalid=0 send_seq=100718 receive_seq=100718 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=978482 sysload=0.19 cputime=192.020 memavail=7290744 print_time=3564.668 buffer_time=2.068 print_stall=0 extruder: target=240 temp=240.0 pwm=0.504
Stats 792031.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4410152 bytes_read=1407508 bytes_retransmit=9 bytes_invalid=0 send_seq=100773 receive_seq=100773 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.391 sd_pos=978965 sysload=0.19 cputime=192.081 memavail=7290744 print_time=3565.756 buffer_time=2.156 print_stall=0 extruder: target=240 temp=240.0 pwm=0.474
Stats 792032.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4411657 bytes_read=1407971 bytes_retransmit=9 bytes_invalid=0 send_seq=100807 receive_seq=100807 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=979519 sysload=0.19 cputime=192.142 memavail=7290744 print_time=3567.209 buffer_time=2.608 print_stall=0 extruder: target=240 temp=240.1 pwm=0.374
Stats 792033.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4412576 bytes_read=1408383 bytes_retransmit=9 bytes_invalid=0 send_seq=100831 receive_seq=100831 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=979917 sysload=0.19 cputime=192.200 memavail=7290744 print_time=3568.039 buffer_time=2.437 print_stall=0 extruder: target=240 temp=240.0 pwm=0.454
Stats 792034.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4413659 bytes_read=1408811 bytes_retransmit=9 bytes_invalid=0 send_seq=100858 receive_seq=100858 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=980207 sysload=0.17 cputime=192.256 memavail=7290744 print_time=3568.648 buffer_time=2.045 print_stall=0 extruder: target=240 temp=240.1 pwm=0.451
Stats 792035.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4414913 bytes_read=1409244 bytes_retransmit=9 bytes_invalid=0 send_seq=100886 receive_seq=100886 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=980755 sysload=0.17 cputime=192.320 memavail=7290500 print_time=3569.671 buffer_time=2.067 print_stall=0 extruder: target=240 temp=239.9 pwm=0.534
Stats 792036.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4416349 bytes_read=1409701 bytes_retransmit=9 bytes_invalid=0 send_seq=100919 receive_seq=100919 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=981143 sysload=0.17 cputime=192.394 memavail=7290500 print_time=3570.930 buffer_time=2.325 print_stall=0 extruder: target=240 temp=240.1 pwm=0.377
Stats 792037.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4418520 bytes_read=1410194 bytes_retransmit=9 bytes_invalid=0 send_seq=100962 receive_seq=100962 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=981635 sysload=0.17 cputime=192.478 memavail=7290276 print_time=3571.692 buffer_time=2.085 print_stall=0 extruder: target=240 temp=240.2 pwm=0.377
Stats 792038.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4420261 bytes_read=1410667 bytes_retransmit=9 bytes_invalid=0 send_seq=100998 receive_seq=100998 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=80.0 pwm=0.537 sd_pos=982262 sysload=0.17 cputime=192.559 memavail=7290276 print_time=3572.628 buffer_time=2.021 print_stall=0 extruder: target=240 temp=240.1 pwm=0.423
Stats 792039.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4422584 bytes_read=1411199 bytes_retransmit=9 bytes_invalid=0 send_seq=101043 receive_seq=101043 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=982537 sysload=0.16 cputime=192.641 memavail=7290276 print_time=3573.774 buffer_time=2.165 print_stall=0 extruder: target=240 temp=240.1 pwm=0.423
Stats 792040.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4425572 bytes_read=1411762 bytes_retransmit=9 bytes_invalid=0 send_seq=101100 receive_seq=101100 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=983014 sysload=0.16 cputime=192.713 memavail=7290276 print_time=3574.845 buffer_time=2.234 print_stall=0 extruder: target=240 temp=239.8 pwm=0.542
Stats 792041.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4427148 bytes_read=1412220 bytes_retransmit=9 bytes_invalid=0 send_seq=101133 receive_seq=101133 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=983650 sysload=0.16 cputime=192.799 memavail=7290276 print_time=3575.635 buffer_time=2.023 print_stall=0 extruder: target=240 temp=239.9 pwm=0.454
Stats 792042.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4430151 bytes_read=1412802 bytes_retransmit=9 bytes_invalid=0 send_seq=101191 receive_seq=101191 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=984476 sysload=0.16 cputime=192.875 memavail=7290276 print_time=3576.919 buffer_time=2.305 print_stall=0 extruder: target=240 temp=240.0 pwm=0.424
Stats 792043.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4431156 bytes_read=1413210 bytes_retransmit=9 bytes_invalid=0 send_seq=101217 receive_seq=101217 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=984862 sysload=0.16 cputime=192.946 memavail=7290276 print_time=3577.729 buffer_time=2.114 print_stall=0 extruder: target=240 temp=240.1 pwm=0.409
Stats 792044.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4432321 bytes_read=1413664 bytes_retransmit=9 bytes_invalid=0 send_seq=101246 receive_seq=101246 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=985252 sysload=0.15 cputime=193.026 memavail=7290276 print_time=3578.878 buffer_time=2.263 print_stall=0 extruder: target=240 temp=240.1 pwm=0.409
Stats 792045.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4433725 bytes_read=1414116 bytes_retransmit=9 bytes_invalid=0 send_seq=101278 receive_seq=101278 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=985746 sysload=0.15 cputime=193.101 memavail=7290032 print_time=3579.812 buffer_time=2.196 print_stall=0 extruder: target=240 temp=240.0 pwm=0.468
Stats 792046.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4434770 bytes_read=1414512 bytes_retransmit=9 bytes_invalid=0 send_seq=101302 receive_seq=101302 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=986273 sysload=0.15 cputime=193.172 memavail=7290032 print_time=3580.742 buffer_time=2.125 print_stall=0 extruder: target=240 temp=240.2 pwm=0.332
Stats 792047.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4436155 bytes_read=1414947 bytes_retransmit=9 bytes_invalid=0 send_seq=101332 receive_seq=101332 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=986802 sysload=0.15 cputime=193.251 memavail=7290032 print_time=3582.000 buffer_time=2.383 print_stall=0 extruder: target=240 temp=240.0 pwm=0.455
Stats 792048.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4438835 bytes_read=1415492 bytes_retransmit=9 bytes_invalid=0 send_seq=101384 receive_seq=101384 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=987328 sysload=0.15 cputime=193.331 memavail=7290032 print_time=3582.851 buffer_time=2.233 print_stall=0 extruder: target=240 temp=240.1 pwm=0.403
Stats 792049.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4440895 bytes_read=1415994 bytes_retransmit=9 bytes_invalid=0 send_seq=101426 receive_seq=101426 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=988128 sysload=0.13 cputime=193.408 memavail=7290032 print_time=3583.847 buffer_time=2.228 print_stall=0 extruder: target=240 temp=240.1 pwm=0.371
Stats 792050.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4442492 bytes_read=1416452 bytes_retransmit=9 bytes_invalid=0 send_seq=101459 receive_seq=101459 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.330 sd_pos=988709 sysload=0.13 cputime=193.485 memavail=7290032 print_time=3584.756 buffer_time=2.137 print_stall=0 extruder: target=240 temp=239.8 pwm=0.522
Stats 792051.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4445747 bytes_read=1417069 bytes_retransmit=9 bytes_invalid=0 send_seq=101524 receive_seq=101524 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=990467 sysload=0.13 cputime=193.567 memavail=7290032 print_time=3586.000 buffer_time=2.379 print_stall=0 extruder: target=240 temp=240.0 pwm=0.422
Stats 792052.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4447885 bytes_read=1417567 bytes_retransmit=9 bytes_invalid=0 send_seq=101568 receive_seq=101568 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=990793 sysload=0.13 cputime=193.633 memavail=7290032 print_time=3586.955 buffer_time=2.334 print_stall=0 extruder: target=240 temp=240.1 pwm=0.330
Stats 792053.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4448897 bytes_read=1417985 bytes_retransmit=9 bytes_invalid=0 send_seq=101593 receive_seq=101593 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=991346 sysload=0.13 cputime=193.696 memavail=7290032 print_time=3587.658 buffer_time=2.037 print_stall=0 extruder: target=240 temp=240.1 pwm=0.350
Stats 792054.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4450477 bytes_read=1418478 bytes_retransmit=9 bytes_invalid=0 send_seq=101630 receive_seq=101630 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.446 sd_pos=991870 sysload=0.20 cputime=193.769 memavail=7290032 print_time=3588.876 buffer_time=2.255 print_stall=0 extruder: target=240 temp=239.9 pwm=0.439
Stats 792055.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4451891 bytes_read=1418916 bytes_retransmit=9 bytes_invalid=0 send_seq=101662 receive_seq=101662 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=992312 sysload=0.20 cputime=193.828 memavail=7290540 print_time=3589.786 buffer_time=2.163 print_stall=0 extruder: target=240 temp=240.1 pwm=0.367
Stats 792056.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4453385 bytes_read=1419369 bytes_retransmit=9 bytes_invalid=0 send_seq=101694 receive_seq=101694 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=993003 sysload=0.20 cputime=193.894 memavail=7290540 print_time=3590.734 buffer_time=2.111 print_stall=0 extruder: target=240 temp=240.1 pwm=0.343
Stats 792057.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4454859 bytes_read=1419831 bytes_retransmit=9 bytes_invalid=0 send_seq=101728 receive_seq=101728 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=993554 sysload=0.20 cputime=193.968 memavail=7290768 print_time=3591.876 buffer_time=2.252 print_stall=0 extruder: target=240 temp=240.2 pwm=0.320
Stats 792058.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4457131 bytes_read=1420334 bytes_retransmit=9 bytes_invalid=0 send_seq=101773 receive_seq=101773 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.536 sd_pos=994077 sysload=0.20 cputime=194.043 memavail=7290768 print_time=3592.847 buffer_time=2.223 print_stall=0 extruder: target=240 temp=240.0 pwm=0.423
Stats 792059.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4459841 bytes_read=1420912 bytes_retransmit=9 bytes_invalid=0 send_seq=101827 receive_seq=101827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.0 pwm=0.490 sd_pos=994631 sysload=0.19 cputime=194.116 memavail=7290768 print_time=3593.834 buffer_time=2.209 print_stall=0 extruder: target=240 temp=240.1 pwm=0.402
Stats 792060.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4462339 bytes_read=1421459 bytes_retransmit=9 bytes_invalid=0 send_seq=101878 receive_seq=101878 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=995605 sysload=0.19 cputime=194.196 memavail=7290544 print_time=3594.966 buffer_time=2.340 print_stall=0 extruder: target=240 temp=239.9 pwm=0.458
Stats 792061.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4465146 bytes_read=1422013 bytes_retransmit=9 bytes_invalid=0 send_seq=101931 receive_seq=101931 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=996329 sysload=0.19 cputime=194.271 memavail=7290548 print_time=3596.165 buffer_time=2.539 print_stall=0 extruder: target=240 temp=239.9 pwm=0.458
Stats 792062.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4466312 bytes_read=1422451 bytes_retransmit=9 bytes_invalid=0 send_seq=101960 receive_seq=101960 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=996956 sysload=0.19 cputime=194.336 memavail=7290548 print_time=3596.745 buffer_time=2.118 print_stall=0 extruder: target=240 temp=240.0 pwm=0.458
Stats 792063.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=4468303 bytes_read=1422953 bytes_retransmit=9 bytes_invalid=0 send_seq=102002 receive_seq=102002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=997250 sysload=0.19 cputime=194.400 memavail=7290548 print_time=3597.651 buffer_time=2.023 print_stall=0 extruder: target=240 temp=239.7 pwm=0.548
Stats 792064.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4470009 bytes_read=1423427 bytes_retransmit=9 bytes_invalid=0 send_seq=102038 receive_seq=102038 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=997999 sysload=0.17 cputime=194.469 memavail=7290324 print_time=3599.001 buffer_time=2.373 print_stall=0 extruder: target=240 temp=240.1 pwm=0.371
Stats 792065.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4471395 bytes_read=1423875 bytes_retransmit=9 bytes_invalid=0 send_seq=102069 receive_seq=102069 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=998657 sysload=0.17 cputime=194.538 memavail=7290828 print_time=3599.846 buffer_time=2.217 print_stall=0 extruder: target=240 temp=240.2 pwm=0.371
Stats 792066.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4473126 bytes_read=1424357 bytes_retransmit=9 bytes_invalid=0 send_seq=102107 receive_seq=102107 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992835 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=999132 sysload=0.17 cputime=194.606 memavail=7290828 print_time=3600.778 buffer_time=2.149 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 792067.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4474754 bytes_read=1424800 bytes_retransmit=9 bytes_invalid=0 send_seq=102140 receive_seq=102140 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992824 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=999824 sysload=0.17 cputime=194.663 memavail=7290828 print_time=3601.990 buffer_time=2.359 print_stall=0 extruder: target=240 temp=240.1 pwm=0.418
Stats 792068.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4476166 bytes_read=1425253 bytes_retransmit=9 bytes_invalid=0 send_seq=102172 receive_seq=102172 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119992813 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=1000459 sysload=0.17 cputime=194.726 memavail=7290828 print_time=3602.753 buffer_time=2.122 print_stall=0 extruder: target=240 temp=240.0 pwm=0.470
Stats 792069.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4478923 bytes_read=1425835 bytes_retransmit=9 bytes_invalid=0 send_seq=102227 receive_seq=102227 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992801 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=1001097 sysload=0.16 cputime=194.795 memavail=7290828 print_time=3603.633 buffer_time=2.002 print_stall=0 extruder: target=240 temp=240.0 pwm=0.408
Stats 792070.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4481291 bytes_read=1426348 bytes_retransmit=9 bytes_invalid=0 send_seq=102274 receive_seq=102274 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=1002069 sysload=0.16 cputime=194.870 memavail=7290828 print_time=3604.741 buffer_time=2.109 print_stall=0 extruder: target=240 temp=240.1 pwm=0.391
Stats 792071.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4483853 bytes_read=1426896 bytes_retransmit=9 bytes_invalid=0 send_seq=102325 receive_seq=102325 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=1002665 sysload=0.16 cputime=194.931 memavail=7290828 print_time=3605.808 buffer_time=2.176 print_stall=0 extruder: target=240 temp=240.2 pwm=0.401
Stats 792072.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4486259 bytes_read=1427443 bytes_retransmit=9 bytes_invalid=0 send_seq=102376 receive_seq=102376 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=1002986 sysload=0.16 cputime=194.989 memavail=7290828 print_time=3606.887 buffer_time=2.254 print_stall=0 extruder: target=240 temp=240.1 pwm=0.438
Stats 792073.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4488386 bytes_read=1427936 bytes_retransmit=9 bytes_invalid=0 send_seq=102419 receive_seq=102419 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=1003631 sysload=0.16 cputime=195.056 memavail=7290828 print_time=3607.857 buffer_time=2.223 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 792074.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4490026 bytes_read=1428425 bytes_retransmit=9 bytes_invalid=0 send_seq=102455 receive_seq=102455 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=1004127 sysload=0.23 cputime=195.121 memavail=7290828 print_time=3608.712 buffer_time=2.077 print_stall=0 extruder: target=240 temp=239.8 pwm=0.529
Stats 792075.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4491583 bytes_read=1428887 bytes_retransmit=9 bytes_invalid=0 send_seq=102489 receive_seq=102489 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=1004814 sysload=0.23 cputime=195.183 memavail=7291836 print_time=3609.710 buffer_time=2.075 print_stall=0 extruder: target=240 temp=239.9 pwm=0.479
Stats 792076.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4494129 bytes_read=1429415 bytes_retransmit=9 bytes_invalid=0 send_seq=102539 receive_seq=102539 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.445 sd_pos=1005861 sysload=0.23 cputime=195.251 memavail=7291612 print_time=3611.159 buffer_time=2.524 print_stall=0 extruder: target=240 temp=240.0 pwm=0.389
Stats 792077.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4495896 bytes_read=1429898 bytes_retransmit=9 bytes_invalid=0 send_seq=102577 receive_seq=102577 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=1006498 sysload=0.23 cputime=195.313 memavail=7291868 print_time=3611.742 buffer_time=2.106 print_stall=0 extruder: target=240 temp=240.1 pwm=0.389
Stats 792078.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4497395 bytes_read=1430360 bytes_retransmit=9 bytes_invalid=0 send_seq=102611 receive_seq=102611 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=1006992 sysload=0.23 cputime=195.372 memavail=7291868 print_time=3612.639 buffer_time=2.002 print_stall=0 extruder: target=240 temp=240.1 pwm=0.389
Stats 792079.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4500568 bytes_read=1430953 bytes_retransmit=9 bytes_invalid=0 send_seq=102671 receive_seq=102671 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=1008067 sysload=0.29 cputime=195.448 memavail=7291868 print_time=3613.830 buffer_time=2.192 print_stall=0 extruder: target=240 temp=240.1 pwm=0.475
Stats 792080.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4503375 bytes_read=1431526 bytes_retransmit=9 bytes_invalid=0 send_seq=102727 receive_seq=102727 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=1008555 sysload=0.29 cputime=195.518 memavail=7291868 print_time=3614.955 buffer_time=2.318 print_stall=0 extruder: target=240 temp=239.8 pwm=0.502
Stats 792081.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4504908 bytes_read=1431993 bytes_retransmit=9 bytes_invalid=0 send_seq=102762 receive_seq=102762 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=1008972 sysload=0.29 cputime=195.576 memavail=7291868 print_time=3615.738 buffer_time=2.099 print_stall=0 extruder: target=240 temp=240.1 pwm=0.348
Stats 792082.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4507064 bytes_read=1432493 bytes_retransmit=9 bytes_invalid=0 send_seq=102807 receive_seq=102807 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=1009659 sysload=0.29 cputime=195.642 memavail=7291868 print_time=3616.826 buffer_time=2.187 print_stall=0 extruder: target=240 temp=239.9 pwm=0.448
Stats 792083.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4509436 bytes_read=1433018 bytes_retransmit=9 bytes_invalid=0 send_seq=102855 receive_seq=102855 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=1010191 sysload=0.29 cputime=195.711 memavail=7291868 print_time=3617.875 buffer_time=2.235 print_stall=0 extruder: target=240 temp=239.8 pwm=0.526
Stats 792084.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4512377 bytes_read=1433605 bytes_retransmit=9 bytes_invalid=0 send_seq=102912 receive_seq=102912 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=1011004 sysload=0.26 cputime=195.783 memavail=7291392 print_time=3619.201 buffer_time=2.560 print_stall=0 extruder: target=240 temp=239.7 pwm=0.554
Stats 792085.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4513374 bytes_read=1434003 bytes_retransmit=9 bytes_invalid=0 send_seq=102936 receive_seq=102936 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.383 sd_pos=1011473 sysload=0.26 cputime=195.842 memavail=7290900 print_time=3619.699 buffer_time=2.057 print_stall=0 extruder: target=240 temp=239.9 pwm=0.458
Stats 792086.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4515372 bytes_read=1434516 bytes_retransmit=9 bytes_invalid=0 send_seq=102980 receive_seq=102980 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=1012190 sysload=0.26 cputime=195.911 memavail=7290900 print_time=3620.749 buffer_time=2.107 print_stall=0 extruder: target=240 temp=240.0 pwm=0.424
Stats 792087.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4517371 bytes_read=1435023 bytes_retransmit=9 bytes_invalid=0 send_seq=103023 receive_seq=103023 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=1012957 sysload=0.26 cputime=195.998 memavail=7290920 print_time=3621.870 buffer_time=2.227 print_stall=0 extruder: target=240 temp=240.2 pwm=0.357
Stats 792088.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4519602 bytes_read=1435521 bytes_retransmit=9 bytes_invalid=0 send_seq=103067 receive_seq=103067 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.1 pwm=0.383 sd_pos=1013817 sysload=0.26 cputime=196.074 memavail=7290920 print_time=3622.683 buffer_time=2.039 print_stall=0 extruder: target=240 temp=240.4 pwm=0.286
Stats 792089.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4521833 bytes_read=1436060 bytes_retransmit=9 bytes_invalid=0 send_seq=103113 receive_seq=103113 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=3 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=1014645 sysload=0.24 cputime=196.144 memavail=7290920 print_time=3623.827 buffer_time=2.183 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 792090.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4524343 bytes_read=1436602 bytes_retransmit=9 bytes_invalid=0 send_seq=103163 receive_seq=103163 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.1 pwm=0.388 sd_pos=1015253 sysload=0.24 cputime=196.208 memavail=7290920 print_time=3624.848 buffer_time=2.203 print_stall=0 extruder: target=240 temp=240.0 pwm=0.410
Stats 792091.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4526580 bytes_read=1437110 bytes_retransmit=9 bytes_invalid=0 send_seq=103209 receive_seq=103209 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992775 heater_bed: target=80 temp=80.0 pwm=0.445 sd_pos=1015739 sysload=0.24 cputime=196.274 memavail=7290920 print_time=3625.735 buffer_time=2.089 print_stall=0 extruder: target=240 temp=239.9 pwm=0.438
Stats 792092.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4528390 bytes_read=1437588 bytes_retransmit=9 bytes_invalid=0 send_seq=103246 receive_seq=103246 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.445 sd_pos=1016339 sysload=0.24 cputime=196.338 memavail=7290920 print_time=3626.748 buffer_time=2.102 print_stall=0 extruder: target=240 temp=240.0 pwm=0.438
Stats 792093.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4531035 bytes_read=1438140 bytes_retransmit=9 bytes_invalid=0 send_seq=103298 receive_seq=103298 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.500 sd_pos=1017076 sysload=0.24 cputime=196.420 memavail=7290920 print_time=3627.800 buffer_time=2.152 print_stall=0 extruder: target=240 temp=240.1 pwm=0.377
Stats 792094.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4533348 bytes_read=1438664 bytes_retransmit=9 bytes_invalid=0 send_seq=103344 receive_seq=103344 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=1017720 sysload=0.30 cputime=196.487 memavail=7290920 print_time=3628.847 buffer_time=2.199 print_stall=0 extruder: target=240 temp=240.0 pwm=0.459
Stats 792095.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4534933 bytes_read=1439142 bytes_retransmit=9 bytes_invalid=0 send_seq=103381 receive_seq=103381 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.1 pwm=0.394 sd_pos=1018249 sysload=0.30 cputime=196.543 memavail=7290924 print_time=3629.758 buffer_time=2.109 print_stall=0 extruder: target=240 temp=240.0 pwm=0.463
Stats 792096.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4536384 bytes_read=1439594 bytes_retransmit=9 bytes_invalid=0 send_seq=103413 receive_seq=103413 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=1018880 sysload=0.30 cputime=196.607 memavail=7290924 print_time=3630.808 buffer_time=2.158 print_stall=0 extruder: target=240 temp=239.9 pwm=0.528
Stats 792097.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4538479 bytes_read=1440082 bytes_retransmit=9 bytes_invalid=0 send_seq=103455 receive_seq=103455 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=1019731 sysload=0.30 cputime=196.678 memavail=7290924 print_time=3632.003 buffer_time=2.352 print_stall=0 extruder: target=240 temp=239.8 pwm=0.528
Stats 792098.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4540651 bytes_read=1440605 bytes_retransmit=9 bytes_invalid=0 send_seq=103501 receive_seq=103501 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=1020590 sysload=0.30 cputime=196.747 memavail=7290924 print_time=3632.802 buffer_time=2.150 print_stall=0 extruder: target=240 temp=239.9 pwm=0.460
Stats 792099.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4542690 bytes_read=1441132 bytes_retransmit=9 bytes_invalid=0 send_seq=103545 receive_seq=103545 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=1021339 sysload=0.28 cputime=196.824 memavail=7290924 print_time=3633.841 buffer_time=2.188 print_stall=0 extruder: target=240 temp=240.4 pwm=0.245
Stats 792100.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4545266 bytes_read=1441670 bytes_retransmit=9 bytes_invalid=0 send_seq=103597 receive_seq=103597 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.511 sd_pos=1021921 sysload=0.28 cputime=196.901 memavail=7290924 print_time=3634.764 buffer_time=2.110 print_stall=0 extruder: target=240 temp=240.3 pwm=0.348
Stats 792101.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4547939 bytes_read=1442228 bytes_retransmit=9 bytes_invalid=0 send_seq=103650 receive_seq=103650 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.511 sd_pos=1022367 sysload=0.28 cputime=196.968 memavail=7290700 print_time=3635.852 buffer_time=2.197 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 792102.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4549625 bytes_read=1442700 bytes_retransmit=9 bytes_invalid=0 send_seq=103686 receive_seq=103686 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=80 temp=80.0 pwm=0.391 sd_pos=1022994 sysload=0.28 cputime=197.041 memavail=7290700 print_time=3636.760 buffer_time=2.104 print_stall=0 extruder: target=240 temp=239.8 pwm=0.534
Stats 792103.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4552409 bytes_read=1443253 bytes_retransmit=9 bytes_invalid=0 send_seq=103741 receive_seq=103741 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=1023933 sysload=0.28 cputime=197.117 memavail=7290700 print_time=3638.049 buffer_time=2.392 print_stall=0 extruder: target=240 temp=240.1 pwm=0.388
Stats 792104.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4554455 bytes_read=1443796 bytes_retransmit=9 bytes_invalid=0 send_seq=103785 receive_seq=103785 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992721 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=1024229 sysload=0.26 cputime=197.193 memavail=7290700 print_time=3638.949 buffer_time=2.291 print_stall=0 extruder: target=240 temp=239.8 pwm=0.517
Stats 792105.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4556161 bytes_read=1444259 bytes_retransmit=9 bytes_invalid=0 send_seq=103822 receive_seq=103822 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992723 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=1024946 sysload=0.26 cputime=197.260 memavail=7291460 print_time=3640.104 buffer_time=2.445 print_stall=0 extruder: target=240 temp=239.8 pwm=0.517
Stats 792106.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4557320 bytes_read=1444677 bytes_retransmit=9 bytes_invalid=0 send_seq=103850 receive_seq=103850 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=1025434 sysload=0.26 cputime=197.320 memavail=7291460 print_time=3640.662 buffer_time=2.002 print_stall=0 extruder: target=240 temp=240.3 pwm=0.324
Stats 792107.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4559314 bytes_read=1445194 bytes_retransmit=9 bytes_invalid=0 send_seq=103892 receive_seq=103892 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=1026181 sysload=0.26 cputime=197.388 memavail=7291460 print_time=3641.720 buffer_time=2.059 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 792108.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4561202 bytes_read=1445672 bytes_retransmit=9 bytes_invalid=0 send_seq=103932 receive_seq=103932 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=1026821 sysload=0.26 cputime=197.457 memavail=7291460 print_time=3642.765 buffer_time=2.102 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 792109.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4564027 bytes_read=1446230 bytes_retransmit=9 bytes_invalid=0 send_seq=103985 receive_seq=103985 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=1027678 sysload=0.40 cputime=197.537 memavail=7291460 print_time=3643.802 buffer_time=2.139 print_stall=0 extruder: target=240 temp=240.0 pwm=0.441
Stats 792110.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4566437 bytes_read=1446772 bytes_retransmit=9 bytes_invalid=0 send_seq=104032 receive_seq=104032 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=1028429 sysload=0.40 cputime=197.610 memavail=7291460 print_time=3645.118 buffer_time=2.454 print_stall=0 extruder: target=240 temp=240.0 pwm=0.441
Stats 792111.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4568470 bytes_read=1447270 bytes_retransmit=9 bytes_invalid=0 send_seq=104076 receive_seq=104076 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.533 sd_pos=1028863 sysload=0.40 cputime=197.675 memavail=7291236 print_time=3645.993 buffer_time=2.328 print_stall=0 extruder: target=240 temp=240.3 pwm=0.291
Stats 792112.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4570114 bytes_read=1447733 bytes_retransmit=9 bytes_invalid=0 send_seq=104113 receive_seq=104113 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.504 sd_pos=1029054 sysload=0.40 cputime=197.735 memavail=7291236 print_time=3646.694 buffer_time=2.028 print_stall=0 extruder: target=240 temp=240.0 pwm=0.460
Stats 792113.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4572534 bytes_read=1448290 bytes_retransmit=9 bytes_invalid=0 send_seq=104163 receive_seq=104163 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992747 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=1029735 sysload=0.40 cputime=197.798 memavail=7291236 print_time=3647.749 buffer_time=2.084 print_stall=0 extruder: target=240 temp=240.1 pwm=0.395
Stats 792114.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4574290 bytes_read=1448774 bytes_retransmit=9 bytes_invalid=0 send_seq=104201 receive_seq=104201 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=1030399 sysload=0.36 cputime=197.854 memavail=7291236 print_time=3648.834 buffer_time=2.168 print_stall=0 extruder: target=240 temp=239.8 pwm=0.532
Stats 792115.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4575831 bytes_read=1449227 bytes_retransmit=9 bytes_invalid=0 send_seq=104236 receive_seq=104236 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=1030894 sysload=0.36 cputime=197.918 memavail=7290984 print_time=3649.688 buffer_time=2.021 print_stall=0 extruder: target=240 temp=239.9 pwm=0.505
Stats 792116.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4578192 bytes_read=1449769 bytes_retransmit=9 bytes_invalid=0 send_seq=104283 receive_seq=104283 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=1031807 sysload=0.36 cputime=197.995 memavail=7290984 print_time=3650.952 buffer_time=2.284 print_stall=0 extruder: target=240 temp=240.1 pwm=0.445
Stats 792117.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4580115 bytes_read=1450257 bytes_retransmit=9 bytes_invalid=0 send_seq=104325 receive_seq=104325 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.510 sd_pos=1032478 sysload=0.36 cputime=198.076 memavail=7293616 print_time=3651.926 buffer_time=2.257 print_stall=0 extruder: target=240 temp=239.9 pwm=0.501
Stats 792118.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4582862 bytes_read=1450806 bytes_retransmit=9 bytes_invalid=0 send_seq=104380 receive_seq=104380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=1033287 sysload=0.36 cputime=198.145 memavail=7293388 print_time=3652.909 buffer_time=2.240 print_stall=0 extruder: target=240 temp=240.1 pwm=0.376
Stats 792119.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4584212 bytes_read=1451273 bytes_retransmit=9 bytes_invalid=0 send_seq=104411 receive_seq=104411 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1033522 sysload=0.34 cputime=198.202 memavail=7293388 print_time=3653.682 buffer_time=2.012 print_stall=0 extruder: target=240 temp=239.9 pwm=0.534
Stats 792120.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4586817 bytes_read=1451813 bytes_retransmit=9 bytes_invalid=0 send_seq=104464 receive_seq=104464 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.391 sd_pos=1034068 sysload=0.34 cputime=198.263 memavail=7293164 print_time=3654.918 buffer_time=2.247 print_stall=0 extruder: target=240 temp=239.9 pwm=0.501
Stats 792121.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4588524 bytes_read=1452266 bytes_retransmit=9 bytes_invalid=0 send_seq=104499 receive_seq=104499 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.391 sd_pos=1034620 sysload=0.34 cputime=198.333 memavail=7293164 print_time=3655.803 buffer_time=2.131 print_stall=0 extruder: target=240 temp=239.8 pwm=0.501
Stats 792122.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4590765 bytes_read=1452809 bytes_retransmit=9 bytes_invalid=0 send_seq=104544 receive_seq=104544 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=1035011 sysload=0.34 cputime=198.401 memavail=7293164 print_time=3656.796 buffer_time=2.124 print_stall=0 extruder: target=240 temp=240.0 pwm=0.396
Stats 792123.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4593621 bytes_read=1453372 bytes_retransmit=9 bytes_invalid=0 send_seq=104601 receive_seq=104601 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=1035826 sysload=0.34 cputime=198.468 memavail=7293164 print_time=3658.072 buffer_time=2.400 print_stall=0 extruder: target=240 temp=240.2 pwm=0.289
Stats 792124.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4595307 bytes_read=1453846 bytes_retransmit=9 bytes_invalid=0 send_seq=104637 receive_seq=104637 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.508 sd_pos=1036493 sysload=0.31 cputime=198.541 memavail=7293164 print_time=3659.121 buffer_time=2.449 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 792125.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4597493 bytes_read=1454383 bytes_retransmit=9 bytes_invalid=0 send_seq=104683 receive_seq=104683 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=1037237 sysload=0.31 cputime=198.612 memavail=7293420 print_time=3660.271 buffer_time=2.598 print_stall=0 extruder: target=240 temp=240.0 pwm=0.454
Stats 792126.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4598882 bytes_read=1454821 bytes_retransmit=9 bytes_invalid=0 send_seq=104715 receive_seq=104715 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=1037814 sysload=0.31 cputime=198.678 memavail=7293420 print_time=3660.784 buffer_time=2.111 print_stall=0 extruder: target=240 temp=240.1 pwm=0.385
Stats 792127.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4600645 bytes_read=1455289 bytes_retransmit=9 bytes_invalid=0 send_seq=104753 receive_seq=104753 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=1038423 sysload=0.31 cputime=198.746 memavail=7293420 print_time=3661.679 buffer_time=2.006 print_stall=0 extruder: target=240 temp=239.9 pwm=0.513
Stats 792128.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4604104 bytes_read=1455926 bytes_retransmit=9 bytes_invalid=0 send_seq=104819 receive_seq=104819 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992775 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=1039224 sysload=0.31 cputime=198.820 memavail=7293420 print_time=3662.794 buffer_time=2.120 print_stall=0 extruder: target=240 temp=240.0 pwm=0.436
Stats 792129.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4606292 bytes_read=1456450 bytes_retransmit=9 bytes_invalid=0 send_seq=104865 receive_seq=104865 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=1039916 sysload=0.28 cputime=198.883 memavail=7293420 print_time=3663.732 buffer_time=2.056 print_stall=0 extruder: target=240 temp=240.1 pwm=0.382
Stats 792130.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4608490 bytes_read=1456948 bytes_retransmit=9 bytes_invalid=0 send_seq=104909 receive_seq=104909 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.526 sd_pos=1040279 sysload=0.28 cputime=198.951 memavail=7293420 print_time=3664.760 buffer_time=2.084 print_stall=0 extruder: target=240 temp=240.0 pwm=0.410
Stats 792131.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4611357 bytes_read=1457540 bytes_retransmit=9 bytes_invalid=0 send_seq=104966 receive_seq=104966 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.515 sd_pos=1040774 sysload=0.28 cputime=199.025 memavail=7293420 print_time=3666.085 buffer_time=2.408 print_stall=0 extruder: target=240 temp=240.0 pwm=0.416
Stats 792132.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4613924 bytes_read=1458073 bytes_retransmit=9 bytes_invalid=0 send_seq=105017 receive_seq=105017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=3 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=80.0 pwm=0.525 sd_pos=1041577 sysload=0.28 cputime=199.090 memavail=7293420 print_time=3667.239 buffer_time=2.562 print_stall=0 extruder: target=240 temp=239.8 pwm=0.482
Stats 792133.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4614850 bytes_read=1458486 bytes_retransmit=9 bytes_invalid=0 send_seq=105041 receive_seq=105041 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.382 sd_pos=1041745 sysload=0.28 cputime=199.146 memavail=7293420 print_time=3667.815 buffer_time=2.137 print_stall=0 extruder: target=240 temp=239.9 pwm=0.421
Stats 792134.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4616296 bytes_read=1458969 bytes_retransmit=9 bytes_invalid=0 send_seq=105076 receive_seq=105076 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.445 sd_pos=1042325 sysload=0.26 cputime=199.219 memavail=7293420 print_time=3668.805 buffer_time=2.127 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 792135.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4617889 bytes_read=1459417 bytes_retransmit=9 bytes_invalid=0 send_seq=105110 receive_seq=105110 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=1042906 sysload=0.26 cputime=199.284 memavail=7293424 print_time=3669.853 buffer_time=2.174 print_stall=0 extruder: target=240 temp=240.0 pwm=0.439
Stats 792136.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4619853 bytes_read=1459910 bytes_retransmit=9 bytes_invalid=0 send_seq=105150 receive_seq=105150 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=1043711 sysload=0.26 cputime=199.353 memavail=7293200 print_time=3671.022 buffer_time=2.342 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 792137.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4622720 bytes_read=1460477 bytes_retransmit=9 bytes_invalid=0 send_seq=105205 receive_seq=105205 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=1044374 sysload=0.26 cputime=199.417 memavail=7293200 print_time=3672.095 buffer_time=2.415 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 792138.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4625114 bytes_read=1461000 bytes_retransmit=9 bytes_invalid=0 send_seq=105254 receive_seq=105254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.391 sd_pos=1044799 sysload=0.26 cputime=199.472 memavail=7293200 print_time=3673.037 buffer_time=2.356 print_stall=0 extruder: target=240 temp=240.1 pwm=0.427
Stats 792139.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4626727 bytes_read=1461488 bytes_retransmit=9 bytes_invalid=0 send_seq=105290 receive_seq=105290 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=1045159 sysload=0.24 cputime=199.534 memavail=7293200 print_time=3673.964 buffer_time=2.283 print_stall=0 extruder: target=240 temp=240.0 pwm=0.427
Stats 792140.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4629111 bytes_read=1462025 bytes_retransmit=9 bytes_invalid=0 send_seq=105339 receive_seq=105339 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.400 sd_pos=1045500 sysload=0.24 cputime=199.596 memavail=7293200 print_time=3674.890 buffer_time=2.209 print_stall=0 extruder: target=240 temp=240.0 pwm=0.427
Stats 792141.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4630479 bytes_read=1462463 bytes_retransmit=9 bytes_invalid=0 send_seq=105371 receive_seq=105371 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=555 freq=119992725 heater_bed: target=80 temp=80.0 pwm=0.517 sd_pos=1045833 sysload=0.24 cputime=199.656 memavail=7293136 print_time=3676.061 buffer_time=2.379 print_stall=0 extruder: target=240 temp=240.0 pwm=0.453
Stats 792142.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4633659 bytes_read=1463066 bytes_retransmit=9 bytes_invalid=0 send_seq=105433 receive_seq=105433 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992723 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=1046688 sysload=0.24 cputime=199.726 memavail=7293232 print_time=3677.250 buffer_time=2.567 print_stall=0 extruder: target=240 temp=239.8 pwm=0.509
Stats 792143.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4634974 bytes_read=1463508 bytes_retransmit=9 bytes_invalid=0 send_seq=105463 receive_seq=105463 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.503 sd_pos=1047189 sysload=0.24 cputime=199.782 memavail=7293232 print_time=3678.111 buffer_time=2.428 print_stall=0 extruder: target=240 temp=239.9 pwm=0.434
Stats 792144.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4636384 bytes_read=1463961 bytes_retransmit=9 bytes_invalid=0 send_seq=105495 receive_seq=105495 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992719 heater_bed: target=80 temp=80.0 pwm=0.503 sd_pos=1047684 sysload=0.22 cputime=199.847 memavail=7293232 print_time=3679.077 buffer_time=2.392 print_stall=0 extruder: target=240 temp=239.9 pwm=0.459
Stats 792145.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4638005 bytes_read=1464424 bytes_retransmit=9 bytes_invalid=0 send_seq=105529 receive_seq=105529 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992719 heater_bed: target=80 temp=80.0 pwm=0.548 sd_pos=1048263 sysload=0.22 cputime=199.920 memavail=7293236 print_time=3679.980 buffer_time=2.296 print_stall=0 extruder: target=240 temp=240.0 pwm=0.407
Stats 792146.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4640066 bytes_read=1464926 bytes_retransmit=9 bytes_invalid=0 send_seq=105571 receive_seq=105571 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992720 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=1048889 sysload=0.22 cputime=199.985 memavail=7293236 print_time=3680.715 buffer_time=2.030 print_stall=0 extruder: target=240 temp=240.2 pwm=0.351
Stats 792147.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4643104 bytes_read=1465504 bytes_retransmit=9 bytes_invalid=0 send_seq=105631 receive_seq=105631 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992716 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1049555 sysload=0.22 cputime=200.083 memavail=7295572 print_time=3681.878 buffer_time=2.192 print_stall=0 extruder: target=240 temp=239.9 pwm=0.502
Stats 792148.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4644831 bytes_read=1465982 bytes_retransmit=9 bytes_invalid=0 send_seq=105668 receive_seq=105668 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992709 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=1049958 sysload=0.22 cputime=200.134 memavail=7295572 print_time=3683.193 buffer_time=2.507 print_stall=0 extruder: target=240 temp=239.9 pwm=0.456
Stats 792149.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4647004 bytes_read=1466509 bytes_retransmit=9 bytes_invalid=0 send_seq=105712 receive_seq=105712 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992715 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=1050521 sysload=0.20 cputime=200.178 memavail=7295572 print_time=3684.051 buffer_time=2.364 print_stall=0 extruder: target=240 temp=240.1 pwm=0.440
Stats 792150.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4648071 bytes_read=1466917 bytes_retransmit=9 bytes_invalid=0 send_seq=105738 receive_seq=105738 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992715 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=1050633 sysload=0.20 cputime=200.220 memavail=7295572 print_time=3684.842 buffer_time=2.155 print_stall=0 extruder: target=240 temp=240.0 pwm=0.440
Stats 792151.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4650945 bytes_read=1467490 bytes_retransmit=9 bytes_invalid=0 send_seq=105794 receive_seq=105794 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992708 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1051476 sysload=0.20 cputime=200.283 memavail=7295572 print_time=3685.962 buffer_time=2.274 print_stall=0 extruder: target=240 temp=240.0 pwm=0.440
Stats 792152.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4653331 bytes_read=1468022 bytes_retransmit=9 bytes_invalid=0 send_seq=105842 receive_seq=105842 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992706 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1051939 sysload=0.20 cputime=200.343 memavail=7295572 print_time=3686.930 buffer_time=2.242 print_stall=0 extruder: target=240 temp=239.8 pwm=0.495
Stats 792153.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4654343 bytes_read=1468430 bytes_retransmit=9 bytes_invalid=0 send_seq=105868 receive_seq=105868 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992703 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1052247 sysload=0.20 cputime=200.406 memavail=7295572 print_time=3687.711 buffer_time=2.023 print_stall=0 extruder: target=240 temp=240.0 pwm=0.410
Stats 792154.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4656131 bytes_read=1468920 bytes_retransmit=9 bytes_invalid=0 send_seq=105906 receive_seq=105906 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992705 heater_bed: target=80 temp=80.0 pwm=0.522 sd_pos=1052908 sysload=0.18 cputime=200.471 memavail=7295572 print_time=3688.848 buffer_time=2.159 print_stall=0 extruder: target=240 temp=239.7 pwm=0.534
Stats 792155.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4657880 bytes_read=1469399 bytes_retransmit=9 bytes_invalid=0 send_seq=105945 receive_seq=105945 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992708 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=1053469 sysload=0.18 cputime=200.535 memavail=7295320 print_time=3689.793 buffer_time=2.103 print_stall=0 extruder: target=240 temp=240.1 pwm=0.344
Stats 792156.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4661227 bytes_read=1469995 bytes_retransmit=9 bytes_invalid=0 send_seq=106009 receive_seq=106009 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119992712 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=1054355 sysload=0.18 cputime=200.600 memavail=7295324 print_time=3690.861 buffer_time=2.171 print_stall=0 extruder: target=240 temp=240.1 pwm=0.406
Stats 792157.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4663459 bytes_read=1470513 bytes_retransmit=9 bytes_invalid=0 send_seq=106054 receive_seq=106054 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992712 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=1054765 sysload=0.18 cputime=200.660 memavail=7295324 print_time=3691.869 buffer_time=2.179 print_stall=0 extruder: target=240 temp=240.1 pwm=0.415
Stats 792158.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4664560 bytes_read=1470935 bytes_retransmit=9 bytes_invalid=0 send_seq=106080 receive_seq=106080 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=1055110 sysload=0.18 cputime=200.717 memavail=7295324 print_time=3692.840 buffer_time=2.148 print_stall=0 extruder: target=240 temp=240.1 pwm=0.467
Stats 792159.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4667748 bytes_read=1471534 bytes_retransmit=9 bytes_invalid=0 send_seq=106141 receive_seq=106141 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=1056190 sysload=0.17 cputime=200.785 memavail=7295324 print_time=3694.270 buffer_time=2.578 print_stall=0 extruder: target=240 temp=239.8 pwm=0.529
Stats 792160.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4668709 bytes_read=1471952 bytes_retransmit=9 bytes_invalid=0 send_seq=106166 receive_seq=106166 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=1056274 sysload=0.17 cputime=200.830 memavail=7295324 print_time=3694.736 buffer_time=2.043 print_stall=0 extruder: target=240 temp=240.0 pwm=0.406
Stats 792161.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4670216 bytes_read=1472409 bytes_retransmit=9 bytes_invalid=0 send_seq=106199 receive_seq=106199 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=1056663 sysload=0.17 cputime=200.883 memavail=7295324 print_time=3696.127 buffer_time=2.434 print_stall=0 extruder: target=240 temp=240.1 pwm=0.384
Stats 792162.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4671132 bytes_read=1472802 bytes_retransmit=9 bytes_invalid=0 send_seq=106222 receive_seq=106222 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.506 sd_pos=1056912 sysload=0.17 cputime=200.929 memavail=7295324 print_time=3696.870 buffer_time=2.176 print_stall=0 extruder: target=240 temp=240.1 pwm=0.358
Stats 792163.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4673357 bytes_read=1473320 bytes_retransmit=9 bytes_invalid=0 send_seq=106267 receive_seq=106267 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.518 sd_pos=1057303 sysload=0.17 cputime=200.990 memavail=7295324 print_time=3697.847 buffer_time=2.153 print_stall=0 extruder: target=240 temp=240.1 pwm=0.415
Stats 792164.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4674869 bytes_read=1473797 bytes_retransmit=9 bytes_invalid=0 send_seq=106301 receive_seq=106301 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=1057525 sysload=0.16 cputime=201.058 memavail=7295324 print_time=3698.867 buffer_time=2.172 print_stall=0 extruder: target=240 temp=240.2 pwm=0.411
Stats 792165.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4677053 bytes_read=1474240 bytes_retransmit=9 bytes_invalid=0 send_seq=106346 receive_seq=106334 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=598 upcoming_bytes=0 freq=119992732 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=1058212 sysload=0.16 cputime=201.130 memavail=7295072 print_time=3700.186 buffer_time=2.476 print_stall=0 extruder: target=240 temp=239.9 pwm=0.547
Stats 792166.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4679049 bytes_read=1474798 bytes_retransmit=9 bytes_invalid=0 send_seq=106387 receive_seq=106387 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992731 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=1058487 sysload=0.16 cputime=201.185 memavail=7295076 print_time=3701.045 buffer_time=2.335 print_stall=0 extruder: target=240 temp=240.1 pwm=0.418
Stats 792167.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4681497 bytes_read=1475330 bytes_retransmit=9 bytes_invalid=0 send_seq=106435 receive_seq=106435 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.535 sd_pos=1058990 sysload=0.16 cputime=201.252 memavail=7295076 print_time=3702.454 buffer_time=2.743 print_stall=0 extruder: target=240 temp=239.9 pwm=0.517
Stats 792168.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4682780 bytes_read=1475758 bytes_retransmit=9 bytes_invalid=0 send_seq=106465 receive_seq=106465 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=1059129 sysload=0.16 cputime=201.302 memavail=7295076 print_time=3702.757 buffer_time=2.046 print_stall=0 extruder: target=240 temp=239.8 pwm=0.534
Stats 792169.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4684841 bytes_read=1476281 bytes_retransmit=9 bytes_invalid=0 send_seq=106508 receive_seq=106508 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=1059429 sysload=0.22 cputime=201.370 memavail=7295076 print_time=3703.948 buffer_time=2.236 print_stall=0 extruder: target=240 temp=240.1 pwm=0.377
Stats 792170.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4685168 bytes_read=1476648 bytes_retransmit=9 bytes_invalid=0 send_seq=106523 receive_seq=106523 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1059429 sysload=0.22 cputime=201.429 memavail=7295076 print_time=3705.115 buffer_time=2.403 print_stall=0 extruder: target=240 temp=240.2 pwm=0.320
Stats 792171.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4685464 bytes_read=1477001 bytes_retransmit=9 bytes_invalid=0 send_seq=106538 receive_seq=106538 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=1059453 sysload=0.22 cputime=201.485 memavail=7295076 print_time=3705.865 buffer_time=2.152 print_stall=0 extruder: target=240 temp=240.3 pwm=0.364
Stats 792172.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4686210 bytes_read=1477394 bytes_retransmit=9 bytes_invalid=0 send_seq=106558 receive_seq=106558 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=1059496 sysload=0.22 cputime=201.547 memavail=7295076 print_time=3711.373 buffer_time=6.660 print_stall=0 extruder: target=240 temp=240.2 pwm=0.364
Stats 792173.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4686388 bytes_read=1477751 bytes_retransmit=9 bytes_invalid=0 send_seq=106571 receive_seq=106571 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=1059496 sysload=0.22 cputime=201.600 memavail=7295076 print_time=3711.373 buffer_time=5.659 print_stall=0 extruder: target=240 temp=239.6 pwm=0.575
Stats 792174.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=4686561 bytes_read=1478104 bytes_retransmit=9 bytes_invalid=0 send_seq=106583 receive_seq=106583 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=1059496 sysload=0.21 cputime=201.646 memavail=7295076 print_time=3711.373 buffer_time=4.659 print_stall=0 extruder: target=240 temp=239.9 pwm=0.441
Stats 792175.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=4686761 bytes_read=1478462 bytes_retransmit=9 bytes_invalid=0 send_seq=106596 receive_seq=106596 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=79.9 pwm=0.554 sd_pos=1059496 sysload=0.21 cputime=201.695 memavail=7295076 print_time=3711.373 buffer_time=3.658 print_stall=0 extruder: target=240 temp=240.5 pwm=0.204
Stats 792176.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=4686939 bytes_read=1478819 bytes_retransmit=9 bytes_invalid=0 send_seq=106609 receive_seq=106609 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=79.9 pwm=0.554 sd_pos=1059496 sysload=0.21 cputime=201.753 memavail=7295084 print_time=3711.373 buffer_time=2.658 print_stall=0 extruder: target=240 temp=240.7 pwm=0.274
Unknown command:"M900"
Finished SD card print
Exiting SD card print (position 1070231)
Hyperlapse: frames stopped
Stats 792177.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=4687312 bytes_read=1479141 bytes_retransmit=9 bytes_invalid=0 send_seq=106625 receive_seq=106625 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=0 temp=79.9 pwm=0.000  sysload=0.21 cputime=201.832 memavail=7298900 print_time=3711.573 buffer_time=1.857 print_stall=0 extruder: target=0 temp=240.9 pwm=0.000
Stats 792178.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=4687318 bytes_read=1479259 bytes_retransmit=9 bytes_invalid=0 send_seq=106626 receive_seq=106626 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=0 temp=79.9 pwm=0.000  sysload=0.21 cputime=201.866 memavail=7234608 print_time=3711.573 buffer_time=0.856 print_stall=0 extruder: target=0 temp=240.7 pwm=0.000
Stats 792179.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=4687324 bytes_read=1479391 bytes_retransmit=9 bytes_invalid=0 send_seq=106627 receive_seq=106627 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=0 temp=79.9 pwm=0.000  sysload=0.51 cputime=201.895 memavail=7178920 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=240.4 pwm=0.000
Stats 792180.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=4687330 bytes_read=1479494 bytes_retransmit=9 bytes_invalid=0 send_seq=106628 receive_seq=106628 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=0 temp=79.9 pwm=0.000  sysload=0.51 cputime=201.922 memavail=7159996 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=239.5 pwm=0.000
Stats 792181.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=4687336 bytes_read=1479612 bytes_retransmit=9 bytes_invalid=0 send_seq=106629 receive_seq=106629 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=0 temp=79.9 pwm=0.000  sysload=0.51 cputime=201.949 memavail=7150140 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=238.7 pwm=0.000
Stats 792182.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=4687342 bytes_read=1479729 bytes_retransmit=9 bytes_invalid=0 send_seq=106630 receive_seq=106630 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=1 freq=119992768 heater_bed: target=0 temp=80.0 pwm=0.000  sysload=0.51 cputime=201.993 memavail=7146144 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=237.4 pwm=0.000
Stats 792183.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=4687354 bytes_read=1479848 bytes_retransmit=9 bytes_invalid=0 send_seq=106632 receive_seq=106632 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=0 temp=80.0 pwm=0.000  sysload=0.51 cputime=202.018 memavail=7145660 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=236.4 pwm=0.000
Stats 792184.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687360 bytes_read=1479980 bytes_retransmit=9 bytes_invalid=0 send_seq=106633 receive_seq=106633 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=0 temp=79.9 pwm=0.000  sysload=0.63 cputime=202.039 memavail=7145556 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=235.5 pwm=0.000
Stats 792185.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687366 bytes_read=1480097 bytes_retransmit=9 bytes_invalid=0 send_seq=106634 receive_seq=106634 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=0 temp=79.9 pwm=0.000  sysload=0.63 cputime=202.056 memavail=7142892 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=234.4 pwm=0.000
Stats 792186.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687372 bytes_read=1480200 bytes_retransmit=9 bytes_invalid=0 send_seq=106635 receive_seq=106635 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992748 heater_bed: target=0 temp=79.9 pwm=0.000  sysload=0.63 cputime=202.089 memavail=7142536 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=233.3 pwm=0.000
Stats 792187.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687378 bytes_read=1480318 bytes_retransmit=9 bytes_invalid=0 send_seq=106636 receive_seq=106636 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=0 temp=79.9 pwm=0.000  sysload=0.63 cputime=202.121 memavail=7142640 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=232.5 pwm=0.000
Stats 792188.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687384 bytes_read=1480435 bytes_retransmit=9 bytes_invalid=0 send_seq=106637 receive_seq=106637 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=0 temp=79.9 pwm=0.000  sysload=0.63 cputime=202.146 memavail=7139512 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=231.2 pwm=0.000
Stats 792189.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687390 bytes_read=1480550 bytes_retransmit=9 bytes_invalid=0 send_seq=106638 receive_seq=106638 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=0 temp=79.8 pwm=0.000  sysload=0.74 cputime=202.202 memavail=7137084 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=230.6 pwm=0.000
Stats 792190.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687396 bytes_read=1480660 bytes_retransmit=9 bytes_invalid=0 send_seq=106639 receive_seq=106639 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=0 temp=79.8 pwm=0.000  sysload=0.74 cputime=202.233 memavail=7136984 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=229.7 pwm=0.000
Stats 792191.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687402 bytes_read=1480769 bytes_retransmit=9 bytes_invalid=0 send_seq=106640 receive_seq=106640 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992729 heater_bed: target=0 temp=79.7 pwm=0.000  sysload=0.74 cputime=202.266 memavail=7140856 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=228.6 pwm=0.000
Stats 792192.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687408 bytes_read=1480872 bytes_retransmit=9 bytes_invalid=0 send_seq=106641 receive_seq=106641 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992732 heater_bed: target=0 temp=79.7 pwm=0.000  sysload=0.74 cputime=202.295 memavail=7140500 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=227.6 pwm=0.000
Stats 792193.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687414 bytes_read=1480990 bytes_retransmit=9 bytes_invalid=0 send_seq=106642 receive_seq=106642 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=0 temp=79.6 pwm=0.000  sysload=0.74 cputime=202.319 memavail=7140328 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=227.0 pwm=0.000
Stats 792194.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687420 bytes_read=1481121 bytes_retransmit=9 bytes_invalid=0 send_seq=106643 receive_seq=106643 retransmit_seq=17 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=0 temp=79.6 pwm=0.000  sysload=0.84 cputime=202.365 memavail=7139972 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=225.9 pwm=0.000
Stats 792195.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687426 bytes_read=1481224 bytes_retransmit=9 bytes_invalid=0 send_seq=106644 receive_seq=106644 retransmit_seq=17 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=0 temp=79.6 pwm=0.000  sysload=0.84 cputime=202.406 memavail=7139604 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=225.0 pwm=0.000
Stats 792196.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687432 bytes_read=1481342 bytes_retransmit=9 bytes_invalid=0 send_seq=106645 receive_seq=106645 retransmit_seq=17 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992732 heater_bed: target=0 temp=79.5 pwm=0.000  sysload=0.84 cputime=202.433 memavail=7139156 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=224.3 pwm=0.000
Stats 792197.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687438 bytes_read=1481459 bytes_retransmit=9 bytes_invalid=0 send_seq=106646 receive_seq=106646 retransmit_seq=17 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=0 temp=79.5 pwm=0.000  sysload=0.84 cputime=202.464 memavail=7139560 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=223.1 pwm=0.000
Stats 792198.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687444 bytes_read=1481562 bytes_retransmit=9 bytes_invalid=0 send_seq=106647 receive_seq=106647 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=0 temp=79.4 pwm=0.000  sysload=0.84 cputime=202.505 memavail=7139652 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=222.5 pwm=0.000
Stats 792199.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687450 bytes_read=1481694 bytes_retransmit=9 bytes_invalid=0 send_seq=106648 receive_seq=106648 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=0 temp=79.4 pwm=0.000  sysload=0.93 cputime=202.536 memavail=7139652 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=221.7 pwm=0.000
Stats 792200.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687456 bytes_read=1481811 bytes_retransmit=9 bytes_invalid=0 send_seq=106649 receive_seq=106649 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=0 temp=79.3 pwm=0.000  sysload=0.93 cputime=202.568 memavail=7139696 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=220.6 pwm=0.000
Stats 792201.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687462 bytes_read=1481914 bytes_retransmit=9 bytes_invalid=0 send_seq=106650 receive_seq=106650 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=0 temp=79.3 pwm=0.000  sysload=0.93 cputime=202.600 memavail=7139472 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.9 pwm=0.000
Stats 792202.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687468 bytes_read=1482032 bytes_retransmit=9 bytes_invalid=0 send_seq=106651 receive_seq=106651 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=0 temp=79.2 pwm=0.000  sysload=0.93 cputime=202.642 memavail=7139116 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.2 pwm=0.000
Stats 792203.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687474 bytes_read=1482149 bytes_retransmit=9 bytes_invalid=0 send_seq=106652 receive_seq=106652 retransmit_seq=17 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=0 temp=79.1 pwm=0.000  sysload=0.93 cputime=202.686 memavail=7137692 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=218.1 pwm=0.000
Stats 792204.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687480 bytes_read=1482266 bytes_retransmit=9 bytes_invalid=0 send_seq=106653 receive_seq=106653 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=0 temp=79.1 pwm=0.000  sysload=1.10 cputime=202.712 memavail=7136744 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=217.4 pwm=0.000
Stats 792205.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687486 bytes_read=1482384 bytes_retransmit=9 bytes_invalid=0 send_seq=106654 receive_seq=106654 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992729 heater_bed: target=0 temp=79.0 pwm=0.000  sysload=1.10 cputime=202.750 memavail=7136728 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=216.6 pwm=0.000
Stats 792206.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687492 bytes_read=1482501 bytes_retransmit=9 bytes_invalid=0 send_seq=106655 receive_seq=106655 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992724 heater_bed: target=0 temp=78.9 pwm=0.000  sysload=1.10 cputime=202.788 memavail=7136372 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=215.7 pwm=0.000
Stats 792207.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687498 bytes_read=1482604 bytes_retransmit=9 bytes_invalid=0 send_seq=106656 receive_seq=106656 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=0 temp=78.9 pwm=0.000  sysload=1.10 cputime=202.837 memavail=7136480 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=215.1 pwm=0.000
Stats 792208.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687504 bytes_read=1482722 bytes_retransmit=9 bytes_invalid=0 send_seq=106657 receive_seq=106657 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=0 temp=78.8 pwm=0.000  sysload=1.10 cputime=202.892 memavail=7136376 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=214.3 pwm=0.000
Stats 792209.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687510 bytes_read=1482853 bytes_retransmit=9 bytes_invalid=0 send_seq=106658 receive_seq=106658 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992723 heater_bed: target=0 temp=78.8 pwm=0.000  sysload=1.17 cputime=202.931 memavail=7136448 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=213.3 pwm=0.000
Stats 792210.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687516 bytes_read=1482956 bytes_retransmit=9 bytes_invalid=0 send_seq=106659 receive_seq=106659 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992718 heater_bed: target=0 temp=78.7 pwm=0.000  sysload=1.17 cputime=202.963 memavail=7136492 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=212.8 pwm=0.000
Stats 792211.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687522 bytes_read=1483074 bytes_retransmit=9 bytes_invalid=0 send_seq=106660 receive_seq=106660 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992717 heater_bed: target=0 temp=78.6 pwm=0.000  sysload=1.17 cputime=202.989 memavail=7136732 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=212.0 pwm=0.000
Stats 792212.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687528 bytes_read=1483191 bytes_retransmit=9 bytes_invalid=0 send_seq=106661 receive_seq=106661 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992721 heater_bed: target=0 temp=78.6 pwm=0.000  sysload=1.17 cputime=203.020 memavail=7136732 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=211.1 pwm=0.000
Stats 792213.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687534 bytes_read=1483294 bytes_retransmit=9 bytes_invalid=0 send_seq=106662 receive_seq=106662 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992719 heater_bed: target=0 temp=78.5 pwm=0.000  sysload=1.17 cputime=203.055 memavail=7136880 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=210.3 pwm=0.000
Stats 792214.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687540 bytes_read=1483426 bytes_retransmit=9 bytes_invalid=0 send_seq=106663 receive_seq=106663 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992715 heater_bed: target=0 temp=78.4 pwm=0.000  sysload=1.24 cputime=203.075 memavail=7136956 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=209.6 pwm=0.000
Stats 792215.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687546 bytes_read=1483543 bytes_retransmit=9 bytes_invalid=0 send_seq=106664 receive_seq=106664 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992713 heater_bed: target=0 temp=78.4 pwm=0.000  sysload=1.24 cputime=203.089 memavail=7136200 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=208.8 pwm=0.000
Stats 792216.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687552 bytes_read=1483646 bytes_retransmit=9 bytes_invalid=0 send_seq=106665 receive_seq=106665 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992714 heater_bed: target=0 temp=78.3 pwm=0.000  sysload=1.24 cputime=203.119 memavail=7295812 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=208.2 pwm=0.000
Stats 792217.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687558 bytes_read=1483778 bytes_retransmit=9 bytes_invalid=0 send_seq=106666 receive_seq=106666 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992714 heater_bed: target=0 temp=78.3 pwm=0.000  sysload=1.24 cputime=203.151 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=207.1 pwm=0.000
Stats 792218.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687564 bytes_read=1483881 bytes_retransmit=9 bytes_invalid=0 send_seq=106667 receive_seq=106667 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992714 heater_bed: target=0 temp=78.2 pwm=0.000  sysload=1.24 cputime=203.164 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=206.5 pwm=0.000
Stats 792219.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687570 bytes_read=1483998 bytes_retransmit=9 bytes_invalid=0 send_seq=106668 receive_seq=106668 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992709 heater_bed: target=0 temp=78.1 pwm=0.000  sysload=1.14 cputime=203.192 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=205.8 pwm=0.000
Stats 792220.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687576 bytes_read=1484130 bytes_retransmit=9 bytes_invalid=0 send_seq=106669 receive_seq=106669 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992704 heater_bed: target=0 temp=78.1 pwm=0.000  sysload=1.14 cputime=203.212 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=204.9 pwm=0.000
Stats 792221.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687582 bytes_read=1484233 bytes_retransmit=9 bytes_invalid=0 send_seq=106670 receive_seq=106670 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=0 temp=78.0 pwm=0.000  sysload=1.14 cputime=203.227 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=204.2 pwm=0.000
Stats 792222.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687588 bytes_read=1484336 bytes_retransmit=9 bytes_invalid=0 send_seq=106671 receive_seq=106671 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=0 temp=77.9 pwm=0.000  sysload=1.14 cputime=203.242 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=203.6 pwm=0.000
Stats 792223.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687594 bytes_read=1484468 bytes_retransmit=9 bytes_invalid=0 send_seq=106672 receive_seq=106672 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992751 heater_bed: target=0 temp=77.9 pwm=0.000  sysload=1.14 cputime=203.264 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=202.8 pwm=0.000
Stats 792224.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687600 bytes_read=1484585 bytes_retransmit=9 bytes_invalid=0 send_seq=106673 receive_seq=106673 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=0 temp=77.8 pwm=0.000  sysload=1.05 cputime=203.282 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=202.1 pwm=0.000
Stats 792225.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687606 bytes_read=1484685 bytes_retransmit=9 bytes_invalid=0 send_seq=106674 receive_seq=106674 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992744 heater_bed: target=0 temp=77.7 pwm=0.000  sysload=1.05 cputime=203.307 memavail=7295312 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.3 pwm=0.000
Stats 792226.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687612 bytes_read=1484808 bytes_retransmit=9 bytes_invalid=0 send_seq=106675 receive_seq=106675 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=0 temp=77.7 pwm=0.000  sysload=1.05 cputime=203.331 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=200.6 pwm=0.000
Stats 792227.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687618 bytes_read=1484906 bytes_retransmit=9 bytes_invalid=0 send_seq=106676 receive_seq=106676 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=0 temp=77.6 pwm=0.000  sysload=1.05 cputime=203.352 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.9 pwm=0.000
Stats 792228.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687624 bytes_read=1485009 bytes_retransmit=9 bytes_invalid=0 send_seq=106677 receive_seq=106677 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=0 temp=77.6 pwm=0.000  sysload=1.05 cputime=203.372 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.2 pwm=0.000
Stats 792229.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687630 bytes_read=1485155 bytes_retransmit=9 bytes_invalid=0 send_seq=106678 receive_seq=106678 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=0 temp=77.5 pwm=0.000  sysload=0.96 cputime=203.397 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.4 pwm=0.000
Stats 792230.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687636 bytes_read=1485258 bytes_retransmit=9 bytes_invalid=0 send_seq=106679 receive_seq=106679 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=0 temp=77.4 pwm=0.000  sysload=0.96 cputime=203.425 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.8 pwm=0.000
Stats 792231.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687642 bytes_read=1485361 bytes_retransmit=9 bytes_invalid=0 send_seq=106680 receive_seq=106680 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=0 temp=77.4 pwm=0.000  sysload=0.96 cputime=203.444 memavail=7294308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.1 pwm=0.000
Stats 792232.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687648 bytes_read=1485493 bytes_retransmit=9 bytes_invalid=0 send_seq=106681 receive_seq=106681 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=0 temp=77.3 pwm=0.000  sysload=0.96 cputime=203.462 memavail=7294308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.4 pwm=0.000
Stats 792233.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687654 bytes_read=1485596 bytes_retransmit=9 bytes_invalid=0 send_seq=106682 receive_seq=106682 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=0 temp=77.2 pwm=0.000  sysload=0.96 cputime=203.479 memavail=7294308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.7 pwm=0.000
Stats 792234.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687660 bytes_read=1485713 bytes_retransmit=9 bytes_invalid=0 send_seq=106683 receive_seq=106683 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=0 temp=77.2 pwm=0.000  sysload=0.97 cputime=203.503 memavail=7294308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.1 pwm=0.000
Stats 792235.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687666 bytes_read=1485845 bytes_retransmit=9 bytes_invalid=0 send_seq=106684 receive_seq=106684 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=0 temp=77.1 pwm=0.000  sysload=0.97 cputime=203.527 memavail=7294248 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.2 pwm=0.000
Stats 792236.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687672 bytes_read=1485948 bytes_retransmit=9 bytes_invalid=0 send_seq=106685 receive_seq=106685 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992732 heater_bed: target=0 temp=77.0 pwm=0.000  sysload=0.97 cputime=203.547 memavail=7294308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.8 pwm=0.000
Stats 792237.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687678 bytes_read=1486051 bytes_retransmit=9 bytes_invalid=0 send_seq=106686 receive_seq=106686 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=0 temp=77.0 pwm=0.000  sysload=0.97 cputime=203.564 memavail=7294308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.0 pwm=0.000
Stats 792238.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687684 bytes_read=1486183 bytes_retransmit=9 bytes_invalid=0 send_seq=106687 receive_seq=106687 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 heater_bed: target=0 temp=76.9 pwm=0.000  sysload=0.97 cputime=203.588 memavail=7294308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=192.3 pwm=0.000
Stats 792239.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687690 bytes_read=1486286 bytes_retransmit=9 bytes_invalid=0 send_seq=106688 receive_seq=106688 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=0 temp=76.8 pwm=0.000  sysload=0.97 cputime=203.610 memavail=7294308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.7 pwm=0.000
Stats 792240.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687696 bytes_read=1486403 bytes_retransmit=9 bytes_invalid=0 send_seq=106689 receive_seq=106689 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=0 temp=76.8 pwm=0.000  sysload=0.97 cputime=203.627 memavail=7294308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.1 pwm=0.000
Stats 792241.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687702 bytes_read=1486535 bytes_retransmit=9 bytes_invalid=0 send_seq=106690 receive_seq=106690 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992748 heater_bed: target=0 temp=76.7 pwm=0.000  sysload=0.97 cputime=203.645 memavail=7294308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.2 pwm=0.000
Stats 792242.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687708 bytes_read=1486638 bytes_retransmit=9 bytes_invalid=0 send_seq=106691 receive_seq=106691 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=0 temp=76.6 pwm=0.000  sysload=0.97 cputime=203.663 memavail=7294308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.7 pwm=0.000
Stats 792243.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687714 bytes_read=1486741 bytes_retransmit=9 bytes_invalid=0 send_seq=106692 receive_seq=106692 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=0 temp=76.6 pwm=0.000  sysload=0.97 cputime=203.686 memavail=7294308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.0 pwm=0.000
Stats 792244.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687726 bytes_read=1486889 bytes_retransmit=9 bytes_invalid=0 send_seq=106694 receive_seq=106694 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=0 temp=76.5 pwm=0.000  sysload=0.89 cputime=203.704 memavail=7294308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.2 pwm=0.000
Stats 792245.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687732 bytes_read=1487006 bytes_retransmit=9 bytes_invalid=0 send_seq=106695 receive_seq=106695 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=0 temp=76.4 pwm=0.000  sysload=0.89 cputime=203.721 memavail=7293808 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.7 pwm=0.000
Stats 792246.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687738 bytes_read=1487124 bytes_retransmit=9 bytes_invalid=0 send_seq=106696 receive_seq=106696 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=0 temp=76.4 pwm=0.000  sysload=0.89 cputime=203.737 memavail=7293808 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.1 pwm=0.000
Stats 792247.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687744 bytes_read=1487241 bytes_retransmit=9 bytes_invalid=0 send_seq=106697 receive_seq=106697 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=0 temp=76.3 pwm=0.000  sysload=0.89 cputime=203.762 memavail=7293812 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.3 pwm=0.000
Stats 792248.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687750 bytes_read=1487344 bytes_retransmit=9 bytes_invalid=0 send_seq=106698 receive_seq=106698 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=0 temp=76.3 pwm=0.000  sysload=0.89 cputime=203.784 memavail=7293812 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.7 pwm=0.000
Stats 792249.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687756 bytes_read=1487462 bytes_retransmit=9 bytes_invalid=0 send_seq=106699 receive_seq=106699 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=0 temp=76.2 pwm=0.000  sysload=0.82 cputime=203.804 memavail=7293812 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.2 pwm=0.000
Stats 792250.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687762 bytes_read=1487593 bytes_retransmit=9 bytes_invalid=0 send_seq=106700 receive_seq=106700 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=0 temp=76.1 pwm=0.000  sysload=0.82 cputime=203.823 memavail=7293812 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.4 pwm=0.000
Stats 792251.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687768 bytes_read=1487696 bytes_retransmit=9 bytes_invalid=0 send_seq=106701 receive_seq=106701 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992768 heater_bed: target=0 temp=76.1 pwm=0.000  sysload=0.82 cputime=203.842 memavail=7293812 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=183.9 pwm=0.000
Stats 792252.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687774 bytes_read=1487814 bytes_retransmit=9 bytes_invalid=0 send_seq=106702 receive_seq=106702 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=0 temp=76.0 pwm=0.000  sysload=0.82 cputime=203.863 memavail=7293812 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=183.3 pwm=0.000
Stats 792253.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687780 bytes_read=1487931 bytes_retransmit=9 bytes_invalid=0 send_seq=106703 receive_seq=106703 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992760 heater_bed: target=0 temp=76.0 pwm=0.000  sysload=0.82 cputime=203.884 memavail=7293812 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=182.5 pwm=0.000
Stats 792254.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687786 bytes_read=1488034 bytes_retransmit=9 bytes_invalid=0 send_seq=106704 receive_seq=106704 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=0 temp=75.9 pwm=0.000  sysload=0.75 cputime=203.903 memavail=7293812 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=181.9 pwm=0.000
Stats 792255.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687792 bytes_read=1488166 bytes_retransmit=9 bytes_invalid=0 send_seq=106705 receive_seq=106705 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=0 temp=75.8 pwm=0.000  sysload=0.75 cputime=203.922 memavail=7293812 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=181.4 pwm=0.000
Stats 792256.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687798 bytes_read=1488283 bytes_retransmit=9 bytes_invalid=0 send_seq=106706 receive_seq=106706 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=0 temp=75.7 pwm=0.000  sysload=0.75 cputime=203.971 memavail=7293816 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=180.6 pwm=0.000
Stats 792257.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687804 bytes_read=1488386 bytes_retransmit=9 bytes_invalid=0 send_seq=106707 receive_seq=106707 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=0 temp=75.7 pwm=0.000  sysload=0.75 cputime=204.002 memavail=7293816 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=180.1 pwm=0.000
Stats 792258.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687810 bytes_read=1488504 bytes_retransmit=9 bytes_invalid=0 send_seq=106708 receive_seq=106708 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=0 temp=75.6 pwm=0.000  sysload=0.75 cputime=204.035 memavail=7293816 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=179.5 pwm=0.000
Stats 792259.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687816 bytes_read=1488621 bytes_retransmit=9 bytes_invalid=0 send_seq=106709 receive_seq=106709 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992728 heater_bed: target=0 temp=75.5 pwm=0.000  sysload=0.69 cputime=204.071 memavail=7293976 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.8 pwm=0.000
Stats 792260.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687822 bytes_read=1488738 bytes_retransmit=9 bytes_invalid=0 send_seq=106710 receive_seq=106710 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992751 heater_bed: target=0 temp=75.5 pwm=0.000  sysload=0.69 cputime=204.093 memavail=7294072 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.2 pwm=0.000
Stats 792261.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687828 bytes_read=1488850 bytes_retransmit=9 bytes_invalid=0 send_seq=106711 receive_seq=106711 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=0 temp=75.4 pwm=0.000  sysload=0.69 cputime=204.118 memavail=7294072 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.7 pwm=0.000
Stats 792262.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687834 bytes_read=1488959 bytes_retransmit=9 bytes_invalid=0 send_seq=106712 receive_seq=106712 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=0 temp=75.3 pwm=0.000  sysload=0.69 cputime=204.146 memavail=7294072 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.0 pwm=0.000
Stats 792263.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687840 bytes_read=1489059 bytes_retransmit=9 bytes_invalid=0 send_seq=106713 receive_seq=106713 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=0 temp=75.3 pwm=0.000  sysload=0.69 cputime=204.170 memavail=7294072 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=176.5 pwm=0.000
Stats 792264.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687846 bytes_read=1489177 bytes_retransmit=9 bytes_invalid=0 send_seq=106714 receive_seq=106714 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992744 heater_bed: target=0 temp=75.2 pwm=0.000  sysload=0.64 cputime=204.189 memavail=7294072 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.9 pwm=0.000
Stats 792265.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687852 bytes_read=1489308 bytes_retransmit=9 bytes_invalid=0 send_seq=106715 receive_seq=106715 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=0 temp=75.2 pwm=0.000  sysload=0.64 cputime=204.211 memavail=7294264 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.2 pwm=0.000
Stats 792266.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687858 bytes_read=1489411 bytes_retransmit=9 bytes_invalid=0 send_seq=106716 receive_seq=106716 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=0 temp=75.1 pwm=0.000  sysload=0.64 cputime=204.238 memavail=7294328 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=174.8 pwm=0.000
Stats 792267.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687864 bytes_read=1489529 bytes_retransmit=9 bytes_invalid=0 send_seq=106717 receive_seq=106717 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=0 temp=75.0 pwm=0.000  sysload=0.64 cputime=204.260 memavail=7297776 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=174.1 pwm=0.000
Stats 792268.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687870 bytes_read=1489646 bytes_retransmit=9 bytes_invalid=0 send_seq=106718 receive_seq=106718 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992725 heater_bed: target=0 temp=75.0 pwm=0.000  sysload=0.64 cputime=204.273 memavail=7297912 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.5 pwm=0.000
Stats 792269.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687876 bytes_read=1489749 bytes_retransmit=9 bytes_invalid=0 send_seq=106719 receive_seq=106719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992725 heater_bed: target=0 temp=74.9 pwm=0.000  sysload=0.59 cputime=204.303 memavail=7297912 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.0 pwm=0.000
Stats 792270.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687882 bytes_read=1489881 bytes_retransmit=9 bytes_invalid=0 send_seq=106720 receive_seq=106720 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992720 heater_bed: target=0 temp=74.8 pwm=0.000  sysload=0.59 cputime=204.330 memavail=7297912 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=172.5 pwm=0.000
Stats 792271.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687888 bytes_read=1489998 bytes_retransmit=9 bytes_invalid=0 send_seq=106721 receive_seq=106721 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992714 heater_bed: target=0 temp=74.8 pwm=0.000  sysload=0.59 cputime=204.346 memavail=7297912 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=171.8 pwm=0.000
Stats 792272.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687894 bytes_read=1490101 bytes_retransmit=9 bytes_invalid=0 send_seq=106722 receive_seq=106722 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992708 heater_bed: target=0 temp=74.7 pwm=0.000  sysload=0.59 cputime=204.364 memavail=7297912 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=171.2 pwm=0.000
Stats 792273.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687900 bytes_read=1490219 bytes_retransmit=9 bytes_invalid=0 send_seq=106723 receive_seq=106723 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992708 heater_bed: target=0 temp=74.7 pwm=0.000  sysload=0.59 cputime=204.383 memavail=7297660 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.8 pwm=0.000
Stats 792274.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687906 bytes_read=1490336 bytes_retransmit=9 bytes_invalid=0 send_seq=106724 receive_seq=106724 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992706 heater_bed: target=0 temp=74.6 pwm=0.000  sysload=0.54 cputime=204.405 memavail=7297660 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.1 pwm=0.000
Stats 792275.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687912 bytes_read=1490453 bytes_retransmit=9 bytes_invalid=0 send_seq=106725 receive_seq=106725 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992704 heater_bed: target=0 temp=74.5 pwm=0.000  sysload=0.54 cputime=204.433 memavail=7297156 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.6 pwm=0.000
Stats 792276.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687918 bytes_read=1490571 bytes_retransmit=9 bytes_invalid=0 send_seq=106726 receive_seq=106726 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992711 heater_bed: target=0 temp=74.5 pwm=0.000  sysload=0.54 cputime=204.454 memavail=7297160 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.0 pwm=0.000
Stats 792277.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687924 bytes_read=1490688 bytes_retransmit=9 bytes_invalid=0 send_seq=106727 receive_seq=106727 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992711 heater_bed: target=0 temp=74.4 pwm=0.000  sysload=0.54 cputime=204.476 memavail=7297160 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=168.4 pwm=0.000
Stats 792278.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687930 bytes_read=1490791 bytes_retransmit=9 bytes_invalid=0 send_seq=106728 receive_seq=106728 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992729 heater_bed: target=0 temp=74.3 pwm=0.000  sysload=0.54 cputime=204.499 memavail=7297160 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=167.9 pwm=0.000
Stats 792279.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687936 bytes_read=1490909 bytes_retransmit=9 bytes_invalid=0 send_seq=106729 receive_seq=106729 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=0 temp=74.3 pwm=0.000  sysload=0.50 cputime=204.524 memavail=7297160 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=167.4 pwm=0.000
Stats 792280.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687942 bytes_read=1491040 bytes_retransmit=9 bytes_invalid=0 send_seq=106730 receive_seq=106730 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992724 heater_bed: target=0 temp=74.2 pwm=0.000  sysload=0.50 cputime=204.548 memavail=7297160 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.8 pwm=0.000
Stats 792281.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687948 bytes_read=1491143 bytes_retransmit=9 bytes_invalid=0 send_seq=106731 receive_seq=106731 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992723 heater_bed: target=0 temp=74.2 pwm=0.000  sysload=0.50 cputime=204.569 memavail=7296936 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.3 pwm=0.000
Stats 792282.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687954 bytes_read=1491261 bytes_retransmit=9 bytes_invalid=0 send_seq=106732 receive_seq=106732 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=0 temp=74.1 pwm=0.000  sysload=0.50 cputime=204.588 memavail=7296936 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.9 pwm=0.000
Stats 792283.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687960 bytes_read=1491378 bytes_retransmit=9 bytes_invalid=0 send_seq=106733 receive_seq=106733 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=0 temp=74.1 pwm=0.000  sysload=0.50 cputime=204.605 memavail=7296936 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.2 pwm=0.000
Stats 792284.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687966 bytes_read=1491481 bytes_retransmit=9 bytes_invalid=0 send_seq=106734 receive_seq=106734 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=0 temp=74.0 pwm=0.000  sysload=0.54 cputime=204.629 memavail=7296936 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=164.6 pwm=0.000
Stats 792285.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687972 bytes_read=1491613 bytes_retransmit=9 bytes_invalid=0 send_seq=106735 receive_seq=106735 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=0 temp=73.9 pwm=0.000  sysload=0.54 cputime=204.653 memavail=7296432 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=164.2 pwm=0.000
Stats 792286.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687978 bytes_read=1491730 bytes_retransmit=9 bytes_invalid=0 send_seq=106736 receive_seq=106736 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992745 heater_bed: target=0 temp=73.8 pwm=0.000  sysload=0.54 cputime=204.671 memavail=7296436 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.6 pwm=0.000
Stats 792287.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687984 bytes_read=1491833 bytes_retransmit=9 bytes_invalid=0 send_seq=106737 receive_seq=106737 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=0 temp=73.8 pwm=0.000  sysload=0.54 cputime=204.689 memavail=7296436 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.1 pwm=0.000
Stats 792288.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687990 bytes_read=1491951 bytes_retransmit=9 bytes_invalid=0 send_seq=106738 receive_seq=106738 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=0 temp=73.7 pwm=0.000  sysload=0.54 cputime=204.707 memavail=7296436 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.6 pwm=0.000
Stats 792289.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4687996 bytes_read=1492068 bytes_retransmit=9 bytes_invalid=0 send_seq=106739 receive_seq=106739 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=0 temp=73.7 pwm=0.000  sysload=0.49 cputime=204.732 memavail=7296212 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.0 pwm=0.000
Stats 792290.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688002 bytes_read=1492185 bytes_retransmit=9 bytes_invalid=0 send_seq=106740 receive_seq=106740 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=0 temp=73.6 pwm=0.000  sysload=0.49 cputime=204.754 memavail=7296212 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.6 pwm=0.000
Stats 792291.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688008 bytes_read=1492303 bytes_retransmit=9 bytes_invalid=0 send_seq=106741 receive_seq=106741 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=0 temp=73.6 pwm=0.000  sysload=0.49 cputime=204.778 memavail=7296212 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.0 pwm=0.000
Stats 792292.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688014 bytes_read=1492420 bytes_retransmit=9 bytes_invalid=0 send_seq=106742 receive_seq=106742 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=0 temp=73.5 pwm=0.000  sysload=0.49 cputime=204.796 memavail=7296212 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.4 pwm=0.000
Stats 792293.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688020 bytes_read=1492523 bytes_retransmit=9 bytes_invalid=0 send_seq=106743 receive_seq=106743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=0 temp=73.4 pwm=0.000  sysload=0.49 cputime=204.822 memavail=7296212 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.0 pwm=0.000
Stats 792294.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688026 bytes_read=1492641 bytes_retransmit=9 bytes_invalid=0 send_seq=106744 receive_seq=106744 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992763 heater_bed: target=0 temp=73.4 pwm=0.000  sysload=0.45 cputime=204.848 memavail=7296212 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=159.5 pwm=0.000
Stats 792295.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688032 bytes_read=1492772 bytes_retransmit=9 bytes_invalid=0 send_seq=106745 receive_seq=106745 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=0 temp=73.3 pwm=0.000  sysload=0.45 cputime=204.873 memavail=7295604 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.9 pwm=0.000
Stats 792296.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688038 bytes_read=1492875 bytes_retransmit=9 bytes_invalid=0 send_seq=106746 receive_seq=106746 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=0 temp=73.3 pwm=0.000  sysload=0.45 cputime=204.899 memavail=7295712 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.5 pwm=0.000
Stats 792297.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688044 bytes_read=1492986 bytes_retransmit=9 bytes_invalid=0 send_seq=106747 receive_seq=106747 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=0 temp=73.2 pwm=0.000  sysload=0.45 cputime=204.923 memavail=7295712 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.0 pwm=0.000
Stats 792298.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688050 bytes_read=1493095 bytes_retransmit=9 bytes_invalid=0 send_seq=106748 receive_seq=106748 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=0 temp=73.1 pwm=0.000  sysload=0.45 cputime=204.945 memavail=7295712 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.4 pwm=0.000
Stats 792299.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688056 bytes_read=1493195 bytes_retransmit=9 bytes_invalid=0 send_seq=106749 receive_seq=106749 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=0 temp=73.1 pwm=0.000  sysload=0.42 cputime=204.968 memavail=7295648 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.0 pwm=0.000
Stats 792300.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688062 bytes_read=1493327 bytes_retransmit=9 bytes_invalid=0 send_seq=106750 receive_seq=106750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=0 temp=73.0 pwm=0.000  sysload=0.42 cputime=204.991 memavail=7295740 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.5 pwm=0.000
Stats 792301.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688068 bytes_read=1493444 bytes_retransmit=9 bytes_invalid=0 send_seq=106751 receive_seq=106751 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992768 heater_bed: target=0 temp=73.0 pwm=0.000  sysload=0.42 cputime=205.016 memavail=7295740 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.9 pwm=0.000
Stats 792302.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688074 bytes_read=1493547 bytes_retransmit=9 bytes_invalid=0 send_seq=106752 receive_seq=106752 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992763 heater_bed: target=0 temp=72.9 pwm=0.000  sysload=0.42 cputime=205.039 memavail=7295740 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.5 pwm=0.000
Stats 792303.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688080 bytes_read=1493665 bytes_retransmit=9 bytes_invalid=0 send_seq=106753 receive_seq=106753 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=0 temp=72.8 pwm=0.000  sysload=0.42 cputime=205.062 memavail=7295740 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.0 pwm=0.000
Stats 792304.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688086 bytes_read=1493782 bytes_retransmit=9 bytes_invalid=0 send_seq=106754 receive_seq=106754 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=0 temp=72.8 pwm=0.000  sysload=0.38 cputime=205.081 memavail=7298960 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.4 pwm=0.000
Stats 792305.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688098 bytes_read=1493915 bytes_retransmit=9 bytes_invalid=0 send_seq=106756 receive_seq=106756 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=0 temp=72.7 pwm=0.000  sysload=0.38 cputime=205.102 memavail=7297448 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.0 pwm=0.000
Stats 792306.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688104 bytes_read=1494033 bytes_retransmit=9 bytes_invalid=0 send_seq=106757 receive_seq=106757 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=0 temp=72.7 pwm=0.000  sysload=0.38 cputime=205.129 memavail=7297448 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.6 pwm=0.000
Stats 792307.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688110 bytes_read=1494150 bytes_retransmit=9 bytes_invalid=0 send_seq=106758 receive_seq=106758 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992745 heater_bed: target=0 temp=72.6 pwm=0.000  sysload=0.38 cputime=205.151 memavail=7296944 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.0 pwm=0.000
Stats 792308.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688116 bytes_read=1494253 bytes_retransmit=9 bytes_invalid=0 send_seq=106759 receive_seq=106759 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=0 temp=72.6 pwm=0.000  sysload=0.38 cputime=205.175 memavail=7296944 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.6 pwm=0.000
Stats 792309.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688122 bytes_read=1494371 bytes_retransmit=9 bytes_invalid=0 send_seq=106760 receive_seq=106760 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=0 temp=72.5 pwm=0.000  sysload=0.35 cputime=205.200 memavail=7296944 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.1 pwm=0.000
Stats 792310.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688128 bytes_read=1494488 bytes_retransmit=9 bytes_invalid=0 send_seq=106761 receive_seq=106761 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=0 temp=72.4 pwm=0.000  sysload=0.35 cputime=205.225 memavail=7297684 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.5 pwm=0.000
Stats 792311.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688134 bytes_read=1494605 bytes_retransmit=9 bytes_invalid=0 send_seq=106762 receive_seq=106762 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=0 temp=72.4 pwm=0.000  sysload=0.35 cputime=205.248 memavail=7297700 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.1 pwm=0.000
Stats 792312.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688140 bytes_read=1494723 bytes_retransmit=9 bytes_invalid=0 send_seq=106763 receive_seq=106763 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=0 temp=72.3 pwm=0.000  sysload=0.35 cputime=205.270 memavail=7297700 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.7 pwm=0.000
Stats 792313.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688146 bytes_read=1494840 bytes_retransmit=9 bytes_invalid=0 send_seq=106764 receive_seq=106764 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=0 temp=72.2 pwm=0.000  sysload=0.35 cputime=205.288 memavail=7297700 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.1 pwm=0.000
Stats 792314.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688152 bytes_read=1494943 bytes_retransmit=9 bytes_invalid=0 send_seq=106765 receive_seq=106765 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=0 temp=72.2 pwm=0.000  sysload=0.32 cputime=205.312 memavail=7297700 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.7 pwm=0.000
Stats 792315.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688158 bytes_read=1495061 bytes_retransmit=9 bytes_invalid=0 send_seq=106766 receive_seq=106766 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=0 temp=72.1 pwm=0.000  sysload=0.32 cputime=205.335 memavail=7297096 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.3 pwm=0.000
Stats 792316.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688164 bytes_read=1495192 bytes_retransmit=9 bytes_invalid=0 send_seq=106767 receive_seq=106767 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=0 temp=72.1 pwm=0.000  sysload=0.32 cputime=205.355 memavail=7296752 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.8 pwm=0.000
Stats 792317.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688170 bytes_read=1495295 bytes_retransmit=9 bytes_invalid=0 send_seq=106768 receive_seq=106768 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=0 temp=72.0 pwm=0.000  sysload=0.32 cputime=205.385 memavail=7296752 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.3 pwm=0.000
Stats 792318.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688176 bytes_read=1495413 bytes_retransmit=9 bytes_invalid=0 send_seq=106769 receive_seq=106769 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992811 heater_bed: target=0 temp=71.9 pwm=0.000  sysload=0.32 cputime=205.409 memavail=7296752 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.9 pwm=0.000
Stats 792319.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688182 bytes_read=1495530 bytes_retransmit=9 bytes_invalid=0 send_seq=106770 receive_seq=106770 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=0 temp=71.9 pwm=0.000  sysload=0.30 cputime=205.439 memavail=7296752 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.4 pwm=0.000
Stats 792320.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688188 bytes_read=1495633 bytes_retransmit=9 bytes_invalid=0 send_seq=106771 receive_seq=106771 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=0 temp=71.8 pwm=0.000  sysload=0.30 cputime=205.461 memavail=7296900 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.0 pwm=0.000
Stats 792321.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688194 bytes_read=1495765 bytes_retransmit=9 bytes_invalid=0 send_seq=106772 receive_seq=106772 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=0 temp=71.7 pwm=0.000  sysload=0.30 cputime=205.489 memavail=7297004 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.6 pwm=0.000
Stats 792322.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688200 bytes_read=1495882 bytes_retransmit=9 bytes_invalid=0 send_seq=106773 receive_seq=106773 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=0 temp=71.7 pwm=0.000  sysload=0.30 cputime=205.512 memavail=7297004 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.0 pwm=0.000
Stats 792323.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688206 bytes_read=1495985 bytes_retransmit=9 bytes_invalid=0 send_seq=106774 receive_seq=106774 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=0 temp=71.6 pwm=0.000  sysload=0.30 cputime=205.536 memavail=7297004 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.6 pwm=0.000
Stats 792324.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688212 bytes_read=1496103 bytes_retransmit=9 bytes_invalid=0 send_seq=106775 receive_seq=106775 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=0 temp=71.6 pwm=0.000  sysload=0.27 cputime=205.558 memavail=7297004 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.2 pwm=0.000
Stats 792325.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688218 bytes_read=1496220 bytes_retransmit=9 bytes_invalid=0 send_seq=106776 receive_seq=106776 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=0 temp=71.5 pwm=0.000  sysload=0.27 cputime=205.578 memavail=7296280 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.7 pwm=0.000
Stats 792326.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688224 bytes_read=1496337 bytes_retransmit=9 bytes_invalid=0 send_seq=106777 receive_seq=106777 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=0 temp=71.5 pwm=0.000  sysload=0.27 cputime=205.599 memavail=7296280 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.3 pwm=0.000
Stats 792327.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688230 bytes_read=1496455 bytes_retransmit=9 bytes_invalid=0 send_seq=106778 receive_seq=106778 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=0 temp=71.4 pwm=0.000  sysload=0.27 cputime=205.624 memavail=7296284 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.9 pwm=0.000
Stats 792328.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688236 bytes_read=1496572 bytes_retransmit=9 bytes_invalid=0 send_seq=106779 receive_seq=106779 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992833 heater_bed: target=0 temp=71.3 pwm=0.000  sysload=0.27 cputime=205.646 memavail=7296284 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.4 pwm=0.000
Stats 792329.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688242 bytes_read=1496675 bytes_retransmit=9 bytes_invalid=0 send_seq=106780 receive_seq=106780 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=0 temp=71.3 pwm=0.000  sysload=0.25 cputime=205.664 memavail=7296284 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.0 pwm=0.000
Stats 792330.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688248 bytes_read=1496793 bytes_retransmit=9 bytes_invalid=0 send_seq=106781 receive_seq=106781 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=0 temp=71.2 pwm=0.000  sysload=0.25 cputime=205.682 memavail=7296284 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.6 pwm=0.000
Stats 792331.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688254 bytes_read=1496924 bytes_retransmit=9 bytes_invalid=0 send_seq=106782 receive_seq=106782 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992811 heater_bed: target=0 temp=71.2 pwm=0.000  sysload=0.25 cputime=205.708 memavail=7296284 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.1 pwm=0.000
Stats 792332.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688260 bytes_read=1497026 bytes_retransmit=9 bytes_invalid=0 send_seq=106783 receive_seq=106783 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=0 temp=71.1 pwm=0.000  sysload=0.25 cputime=205.729 memavail=7296284 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.7 pwm=0.000
Stats 792333.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688266 bytes_read=1497135 bytes_retransmit=9 bytes_invalid=0 send_seq=106784 receive_seq=106784 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=0 temp=71.0 pwm=0.000  sysload=0.25 cputime=205.749 memavail=7296284 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.3 pwm=0.000
Stats 792334.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688272 bytes_read=1497244 bytes_retransmit=9 bytes_invalid=0 send_seq=106785 receive_seq=106785 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=0 temp=71.0 pwm=0.000  sysload=0.31 cputime=205.767 memavail=7296284 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.8 pwm=0.000
Stats 792335.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688278 bytes_read=1497347 bytes_retransmit=9 bytes_invalid=0 send_seq=106786 receive_seq=106786 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=0 temp=70.9 pwm=0.000  sysload=0.31 cputime=205.785 memavail=7295784 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.4 pwm=0.000
Stats 792336.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688284 bytes_read=1497479 bytes_retransmit=9 bytes_invalid=0 send_seq=106787 receive_seq=106787 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=0 temp=70.9 pwm=0.000  sysload=0.31 cputime=205.807 memavail=7295784 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.1 pwm=0.000
Stats 792337.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688290 bytes_read=1497596 bytes_retransmit=9 bytes_invalid=0 send_seq=106788 receive_seq=106788 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=0 temp=70.8 pwm=0.000  sysload=0.31 cputime=205.828 memavail=7295784 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.5 pwm=0.000
Stats 792338.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688296 bytes_read=1497699 bytes_retransmit=9 bytes_invalid=0 send_seq=106789 receive_seq=106789 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=0 temp=70.7 pwm=0.000  sysload=0.31 cputime=205.846 memavail=7295784 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.1 pwm=0.000
Stats 792339.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688302 bytes_read=1497817 bytes_retransmit=9 bytes_invalid=0 send_seq=106790 receive_seq=106790 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992799 heater_bed: target=0 temp=70.7 pwm=0.000  sysload=0.29 cputime=205.862 memavail=7295784 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.7 pwm=0.000
Stats 792340.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688308 bytes_read=1497934 bytes_retransmit=9 bytes_invalid=0 send_seq=106791 receive_seq=106791 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=0 temp=70.6 pwm=0.000  sysload=0.29 cputime=205.885 memavail=7295784 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.3 pwm=0.000
Stats 792341.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688314 bytes_read=1498051 bytes_retransmit=9 bytes_invalid=0 send_seq=106792 receive_seq=106792 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=0 temp=70.6 pwm=0.000  sysload=0.29 cputime=205.905 memavail=7295784 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.9 pwm=0.000
Stats 792342.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688320 bytes_read=1498183 bytes_retransmit=9 bytes_invalid=0 send_seq=106793 receive_seq=106793 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=0 temp=70.5 pwm=0.000  sysload=0.29 cputime=205.927 memavail=7295784 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.4 pwm=0.000
Stats 792343.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688326 bytes_read=1498286 bytes_retransmit=9 bytes_invalid=0 send_seq=106794 receive_seq=106794 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992775 heater_bed: target=0 temp=70.4 pwm=0.000  sysload=0.29 cputime=205.943 memavail=7295784 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.1 pwm=0.000
Stats 792344.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688332 bytes_read=1498389 bytes_retransmit=9 bytes_invalid=0 send_seq=106795 receive_seq=106795 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=0 temp=70.4 pwm=0.000  sysload=0.26 cputime=205.966 memavail=7295784 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.7 pwm=0.000
Stats 792345.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688338 bytes_read=1498521 bytes_retransmit=9 bytes_invalid=0 send_seq=106796 receive_seq=106796 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992763 heater_bed: target=0 temp=70.3 pwm=0.000  sysload=0.26 cputime=205.991 memavail=7295784 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.2 pwm=0.000
Stats 792346.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688344 bytes_read=1498638 bytes_retransmit=9 bytes_invalid=0 send_seq=106797 receive_seq=106797 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=0 temp=70.3 pwm=0.000  sysload=0.26 cputime=206.012 memavail=7295788 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.9 pwm=0.000
Stats 792347.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688350 bytes_read=1498741 bytes_retransmit=9 bytes_invalid=0 send_seq=106798 receive_seq=106798 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=0 temp=70.2 pwm=0.000  sysload=0.26 cputime=206.030 memavail=7295788 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.5 pwm=0.000
Stats 792348.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688356 bytes_read=1498873 bytes_retransmit=9 bytes_invalid=0 send_seq=106799 receive_seq=106799 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=0 temp=70.2 pwm=0.000  sysload=0.26 cputime=206.050 memavail=7295788 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.0 pwm=0.000
Stats 792349.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688362 bytes_read=1498976 bytes_retransmit=9 bytes_invalid=0 send_seq=106800 receive_seq=106800 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=0 temp=70.1 pwm=0.000  sysload=0.24 cputime=206.074 memavail=7295788 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.7 pwm=0.000
Stats 792350.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688368 bytes_read=1499079 bytes_retransmit=9 bytes_invalid=0 send_seq=106801 receive_seq=106801 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=0 temp=70.1 pwm=0.000  sysload=0.24 cputime=206.098 memavail=7295788 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.3 pwm=0.000
Stats 792351.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688374 bytes_read=1499225 bytes_retransmit=9 bytes_invalid=0 send_seq=106802 receive_seq=106802 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=0 temp=70.0 pwm=0.000  sysload=0.24 cputime=206.125 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.9 pwm=0.000
Stats 792352.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688380 bytes_read=1499328 bytes_retransmit=9 bytes_invalid=0 send_seq=106803 receive_seq=106803 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=0 temp=70.0 pwm=0.000  sysload=0.24 cputime=206.151 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.5 pwm=0.000
Stats 792353.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688386 bytes_read=1499431 bytes_retransmit=9 bytes_invalid=0 send_seq=106804 receive_seq=106804 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992779 heater_bed: target=0 temp=69.9 pwm=0.000  sysload=0.24 cputime=206.169 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.2 pwm=0.000
Stats 792354.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688392 bytes_read=1499563 bytes_retransmit=9 bytes_invalid=0 send_seq=106805 receive_seq=106805 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=0 temp=69.8 pwm=0.000  sysload=0.22 cputime=206.198 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.7 pwm=0.000
Stats 792355.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688398 bytes_read=1499666 bytes_retransmit=9 bytes_invalid=0 send_seq=106806 receive_seq=106806 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=0 temp=69.8 pwm=0.000  sysload=0.22 cputime=206.220 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.3 pwm=0.000
Stats 792356.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688404 bytes_read=1499783 bytes_retransmit=9 bytes_invalid=0 send_seq=106807 receive_seq=106807 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=0 temp=69.7 pwm=0.000  sysload=0.22 cputime=206.239 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.0 pwm=0.000
Stats 792357.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688410 bytes_read=1499915 bytes_retransmit=9 bytes_invalid=0 send_seq=106808 receive_seq=106808 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=0 temp=69.7 pwm=0.000  sysload=0.22 cputime=206.264 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.5 pwm=0.000
Stats 792358.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688416 bytes_read=1500018 bytes_retransmit=9 bytes_invalid=0 send_seq=106809 receive_seq=106809 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=0 temp=69.6 pwm=0.000  sysload=0.22 cputime=206.288 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.2 pwm=0.000
Stats 792359.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688422 bytes_read=1500121 bytes_retransmit=9 bytes_invalid=0 send_seq=106810 receive_seq=106810 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=0 temp=69.6 pwm=0.000  sysload=0.20 cputime=206.312 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.9 pwm=0.000
Stats 792360.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688428 bytes_read=1500253 bytes_retransmit=9 bytes_invalid=0 send_seq=106811 receive_seq=106811 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992801 heater_bed: target=0 temp=69.5 pwm=0.000  sysload=0.20 cputime=206.333 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.4 pwm=0.000
Stats 792361.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688434 bytes_read=1500370 bytes_retransmit=9 bytes_invalid=0 send_seq=106812 receive_seq=106812 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992850 heater_bed: target=0 temp=69.5 pwm=0.000  sysload=0.20 cputime=206.356 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.1 pwm=0.000
Stats 792362.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688440 bytes_read=1500473 bytes_retransmit=9 bytes_invalid=0 send_seq=106813 receive_seq=106813 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992842 heater_bed: target=0 temp=69.4 pwm=0.000  sysload=0.20 cputime=206.380 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.7 pwm=0.000
Stats 792363.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688446 bytes_read=1500605 bytes_retransmit=9 bytes_invalid=0 send_seq=106814 receive_seq=106814 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=0 temp=69.3 pwm=0.000  sysload=0.20 cputime=206.408 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.3 pwm=0.000
Stats 792364.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688452 bytes_read=1500708 bytes_retransmit=9 bytes_invalid=0 send_seq=106815 receive_seq=106815 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=0 temp=69.3 pwm=0.000  sysload=0.19 cputime=206.431 memavail=7295316 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.0 pwm=0.000
Stats 792365.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688458 bytes_read=1500826 bytes_retransmit=9 bytes_invalid=0 send_seq=106816 receive_seq=106816 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=0 temp=69.2 pwm=0.000  sysload=0.19 cputime=206.450 memavail=7295320 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.7 pwm=0.000
Stats 792366.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688470 bytes_read=1500973 bytes_retransmit=9 bytes_invalid=0 send_seq=106818 receive_seq=106818 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992831 heater_bed: target=0 temp=69.2 pwm=0.000  sysload=0.19 cputime=206.470 memavail=7295320 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.2 pwm=0.000
Stats 792367.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688476 bytes_read=1501076 bytes_retransmit=9 bytes_invalid=0 send_seq=106819 receive_seq=106819 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=0 temp=69.1 pwm=0.000  sysload=0.19 cputime=206.492 memavail=7295320 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.8 pwm=0.000
Stats 792368.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688482 bytes_read=1501190 bytes_retransmit=9 bytes_invalid=0 send_seq=106820 receive_seq=106820 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=0 temp=69.1 pwm=0.000  sysload=0.19 cputime=206.514 memavail=7295320 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.5 pwm=0.000
Stats 792369.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688488 bytes_read=1501299 bytes_retransmit=9 bytes_invalid=0 send_seq=106821 receive_seq=106821 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992831 heater_bed: target=0 temp=69.0 pwm=0.000  sysload=0.17 cputime=206.543 memavail=7295096 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.1 pwm=0.000
Stats 792370.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688494 bytes_read=1501397 bytes_retransmit=9 bytes_invalid=0 send_seq=106822 receive_seq=106822 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=0 temp=69.0 pwm=0.000  sysload=0.17 cputime=206.569 memavail=7295096 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.8 pwm=0.000
Stats 792371.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688500 bytes_read=1501529 bytes_retransmit=9 bytes_invalid=0 send_seq=106823 receive_seq=106823 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=0 temp=68.9 pwm=0.000  sysload=0.17 cputime=206.593 memavail=7295096 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.5 pwm=0.000
Stats 792372.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688506 bytes_read=1501646 bytes_retransmit=9 bytes_invalid=0 send_seq=106824 receive_seq=106824 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=0 temp=68.9 pwm=0.000  sysload=0.17 cputime=206.624 memavail=7295096 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.1 pwm=0.000
Stats 792373.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688512 bytes_read=1501749 bytes_retransmit=9 bytes_invalid=0 send_seq=106825 receive_seq=106825 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=0 temp=68.8 pwm=0.000  sysload=0.17 cputime=206.649 memavail=7295100 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.7 pwm=0.000
Stats 792374.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688518 bytes_read=1501867 bytes_retransmit=9 bytes_invalid=0 send_seq=106826 receive_seq=106826 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=0 temp=68.7 pwm=0.000  sysload=0.16 cputime=206.671 memavail=7295100 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.4 pwm=0.000
Stats 792375.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688524 bytes_read=1501984 bytes_retransmit=9 bytes_invalid=0 send_seq=106827 receive_seq=106827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=0 temp=68.7 pwm=0.000  sysload=0.16 cputime=206.693 memavail=7295856 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.0 pwm=0.000
Stats 792376.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688530 bytes_read=1502101 bytes_retransmit=9 bytes_invalid=0 send_seq=106828 receive_seq=106828 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=0 temp=68.7 pwm=0.000  sysload=0.16 cputime=206.723 memavail=7295888 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.7 pwm=0.000
Stats 792377.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688536 bytes_read=1502219 bytes_retransmit=9 bytes_invalid=0 send_seq=106829 receive_seq=106829 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=0 temp=68.6 pwm=0.000  sysload=0.16 cputime=206.749 memavail=7295888 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.4 pwm=0.000
Stats 792378.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688542 bytes_read=1502336 bytes_retransmit=9 bytes_invalid=0 send_seq=106830 receive_seq=106830 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=0 temp=68.5 pwm=0.000  sysload=0.16 cputime=206.773 memavail=7295888 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.9 pwm=0.000
Stats 792379.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688548 bytes_read=1502439 bytes_retransmit=9 bytes_invalid=0 send_seq=106831 receive_seq=106831 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=0 temp=68.5 pwm=0.000  sysload=0.15 cputime=206.793 memavail=7295888 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.6 pwm=0.000
Stats 792380.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688554 bytes_read=1502557 bytes_retransmit=9 bytes_invalid=0 send_seq=106832 receive_seq=106832 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=0 temp=68.4 pwm=0.000  sysload=0.15 cputime=206.814 memavail=7295888 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.3 pwm=0.000
Stats 792381.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688560 bytes_read=1502688 bytes_retransmit=9 bytes_invalid=0 send_seq=106833 receive_seq=106833 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=0 temp=68.4 pwm=0.000  sysload=0.15 cputime=206.837 memavail=7295888 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.9 pwm=0.000
Stats 792382.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688566 bytes_read=1502794 bytes_retransmit=9 bytes_invalid=0 send_seq=106834 receive_seq=106834 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=0 temp=68.3 pwm=0.000  sysload=0.15 cputime=206.862 memavail=7296644 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.6 pwm=0.000
Stats 792383.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688572 bytes_read=1502915 bytes_retransmit=9 bytes_invalid=0 send_seq=106835 receive_seq=106835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=0 temp=68.3 pwm=0.000  sysload=0.15 cputime=206.884 memavail=7296168 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.3 pwm=0.000
Stats 792384.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688578 bytes_read=1503036 bytes_retransmit=9 bytes_invalid=0 send_seq=106836 receive_seq=106836 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=0 temp=68.2 pwm=0.000  sysload=0.13 cputime=206.903 memavail=7296168 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.8 pwm=0.000
Stats 792385.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688584 bytes_read=1503142 bytes_retransmit=9 bytes_invalid=0 send_seq=106837 receive_seq=106837 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992775 heater_bed: target=0 temp=68.2 pwm=0.000  sysload=0.13 cputime=206.923 memavail=7296064 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.6 pwm=0.000
Stats 792386.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688590 bytes_read=1503277 bytes_retransmit=9 bytes_invalid=0 send_seq=106838 receive_seq=106838 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=0 temp=68.1 pwm=0.000  sysload=0.13 cputime=206.950 memavail=7296172 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.3 pwm=0.000
Stats 792387.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688596 bytes_read=1503398 bytes_retransmit=9 bytes_invalid=0 send_seq=106839 receive_seq=106839 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=0 temp=68.0 pwm=0.000  sysload=0.13 cputime=206.978 memavail=7293656 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.8 pwm=0.000
Stats 792388.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688602 bytes_read=1503504 bytes_retransmit=9 bytes_invalid=0 send_seq=106840 receive_seq=106840 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=0 temp=68.0 pwm=0.000  sysload=0.13 cputime=207.007 memavail=7298160 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.6 pwm=0.000
Stats 792389.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688608 bytes_read=1503625 bytes_retransmit=9 bytes_invalid=0 send_seq=106841 receive_seq=106841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992803 heater_bed: target=0 temp=68.0 pwm=0.000  sysload=0.12 cputime=207.028 memavail=7297936 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.3 pwm=0.000
Stats 792390.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688614 bytes_read=1503746 bytes_retransmit=9 bytes_invalid=0 send_seq=106842 receive_seq=106842 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992801 heater_bed: target=0 temp=67.9 pwm=0.000  sysload=0.12 cputime=207.041 memavail=7297936 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.9 pwm=0.000
Stats 792391.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688620 bytes_read=1503852 bytes_retransmit=9 bytes_invalid=0 send_seq=106843 receive_seq=106843 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=0 temp=67.8 pwm=0.000  sysload=0.12 cputime=207.052 memavail=7297936 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.6 pwm=0.000
Stats 792392.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688626 bytes_read=1503987 bytes_retransmit=9 bytes_invalid=0 send_seq=106844 receive_seq=106844 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=0 temp=67.7 pwm=0.000  sysload=0.12 cputime=207.081 memavail=7297936 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.3 pwm=0.000
Stats 792393.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688632 bytes_read=1504108 bytes_retransmit=9 bytes_invalid=0 send_seq=106845 receive_seq=106845 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=0 temp=67.7 pwm=0.000  sysload=0.12 cputime=207.098 memavail=7297936 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.9 pwm=0.000
Stats 792394.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688638 bytes_read=1504214 bytes_retransmit=9 bytes_invalid=0 send_seq=106846 receive_seq=106846 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=0 temp=67.7 pwm=0.000  sysload=0.11 cputime=207.125 memavail=7297936 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.6 pwm=0.000
Stats 792395.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688644 bytes_read=1504335 bytes_retransmit=9 bytes_invalid=0 send_seq=106847 receive_seq=106847 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=0 temp=67.6 pwm=0.000  sysload=0.11 cputime=207.151 memavail=7297940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.3 pwm=0.000
Stats 792396.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688650 bytes_read=1504456 bytes_retransmit=9 bytes_invalid=0 send_seq=106848 receive_seq=106848 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992881 heater_bed: target=0 temp=67.6 pwm=0.000  sysload=0.11 cputime=207.175 memavail=7297940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.9 pwm=0.000
Stats 792397.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688656 bytes_read=1504576 bytes_retransmit=9 bytes_invalid=0 send_seq=106849 receive_seq=106849 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992868 heater_bed: target=0 temp=67.5 pwm=0.000  sysload=0.11 cputime=207.195 memavail=7297940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.6 pwm=0.000
Stats 792398.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688662 bytes_read=1504697 bytes_retransmit=9 bytes_invalid=0 send_seq=106850 receive_seq=106850 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992855 heater_bed: target=0 temp=67.5 pwm=0.000  sysload=0.11 cputime=207.222 memavail=7297940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.4 pwm=0.000
Stats 792399.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688668 bytes_read=1504818 bytes_retransmit=9 bytes_invalid=0 send_seq=106851 receive_seq=106851 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992846 heater_bed: target=0 temp=67.4 pwm=0.000  sysload=0.10 cputime=207.240 memavail=7297940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.0 pwm=0.000
Stats 792400.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688674 bytes_read=1504924 bytes_retransmit=9 bytes_invalid=0 send_seq=106852 receive_seq=106852 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=0 temp=67.4 pwm=0.000  sysload=0.10 cputime=207.260 memavail=7297940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.7 pwm=0.000
Stats 792401.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688680 bytes_read=1505045 bytes_retransmit=9 bytes_invalid=0 send_seq=106853 receive_seq=106853 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=0 temp=67.3 pwm=0.000  sysload=0.10 cputime=207.278 memavail=7297940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.4 pwm=0.000
Stats 792402.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688686 bytes_read=1505180 bytes_retransmit=9 bytes_invalid=0 send_seq=106854 receive_seq=106854 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=0 temp=67.3 pwm=0.000  sysload=0.10 cputime=207.296 memavail=7297940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.0 pwm=0.000
Stats 792403.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688692 bytes_read=1505286 bytes_retransmit=9 bytes_invalid=0 send_seq=106855 receive_seq=106855 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=0 temp=67.2 pwm=0.000  sysload=0.10 cputime=207.316 memavail=7297940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.8 pwm=0.000
Stats 792404.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688698 bytes_read=1505402 bytes_retransmit=9 bytes_invalid=0 send_seq=106856 receive_seq=106856 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=0 temp=67.2 pwm=0.000  sysload=0.10 cputime=207.336 memavail=7297940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.5 pwm=0.000
Stats 792405.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688704 bytes_read=1505515 bytes_retransmit=9 bytes_invalid=0 send_seq=106857 receive_seq=106857 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992865 heater_bed: target=0 temp=67.1 pwm=0.000  sysload=0.10 cputime=207.355 memavail=7297440 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.1 pwm=0.000
Stats 792406.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688710 bytes_read=1505617 bytes_retransmit=9 bytes_invalid=0 send_seq=106858 receive_seq=106858 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=0 temp=67.0 pwm=0.000  sysload=0.10 cputime=207.372 memavail=7297440 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.9 pwm=0.000
Stats 792407.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688716 bytes_read=1505752 bytes_retransmit=9 bytes_invalid=0 send_seq=106859 receive_seq=106859 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992841 heater_bed: target=0 temp=67.0 pwm=0.000  sysload=0.10 cputime=207.391 memavail=7297440 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.5 pwm=0.000
Stats 792408.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688722 bytes_read=1505873 bytes_retransmit=9 bytes_invalid=0 send_seq=106860 receive_seq=106860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992830 heater_bed: target=0 temp=66.9 pwm=0.000  sysload=0.10 cputime=207.412 memavail=7297440 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.2 pwm=0.000
Stats 792409.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688728 bytes_read=1505979 bytes_retransmit=9 bytes_invalid=0 send_seq=106861 receive_seq=106861 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=0 temp=66.9 pwm=0.000  sysload=0.09 cputime=207.433 memavail=7297440 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.9 pwm=0.000
Stats 792410.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688734 bytes_read=1506100 bytes_retransmit=9 bytes_invalid=0 send_seq=106862 receive_seq=106862 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=0 temp=66.8 pwm=0.000  sysload=0.09 cputime=207.450 memavail=7297440 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.6 pwm=0.000
Stats 792411.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688740 bytes_read=1506221 bytes_retransmit=9 bytes_invalid=0 send_seq=106863 receive_seq=106863 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=0 temp=66.8 pwm=0.000  sysload=0.09 cputime=207.473 memavail=7297440 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.3 pwm=0.000
Stats 792412.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688746 bytes_read=1506341 bytes_retransmit=9 bytes_invalid=0 send_seq=106864 receive_seq=106864 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=0 temp=66.8 pwm=0.000  sysload=0.09 cputime=207.491 memavail=7297440 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.0 pwm=0.000
Stats 792413.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688752 bytes_read=1506462 bytes_retransmit=9 bytes_invalid=0 send_seq=106865 receive_seq=106865 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=0 temp=66.6 pwm=0.000  sysload=0.09 cputime=207.508 memavail=7297440 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.8 pwm=0.000
Stats 792414.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688758 bytes_read=1506583 bytes_retransmit=9 bytes_invalid=0 send_seq=106866 receive_seq=106866 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=0 temp=66.6 pwm=0.000  sysload=0.08 cputime=207.538 memavail=7297440 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.4 pwm=0.000
Stats 792415.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688764 bytes_read=1506689 bytes_retransmit=9 bytes_invalid=0 send_seq=106867 receive_seq=106867 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=0 temp=66.6 pwm=0.000  sysload=0.08 cputime=207.558 memavail=7296940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.1 pwm=0.000
Stats 792416.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688770 bytes_read=1506810 bytes_retransmit=9 bytes_invalid=0 send_seq=106868 receive_seq=106868 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=0 temp=66.5 pwm=0.000  sysload=0.08 cputime=207.576 memavail=7296940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.9 pwm=0.000
Stats 792417.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688776 bytes_read=1506945 bytes_retransmit=9 bytes_invalid=0 send_seq=106869 receive_seq=106869 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=0 temp=66.5 pwm=0.000  sysload=0.08 cputime=207.596 memavail=7296940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.6 pwm=0.000
Stats 792418.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688782 bytes_read=1507051 bytes_retransmit=9 bytes_invalid=0 send_seq=106870 receive_seq=106870 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=0 temp=66.5 pwm=0.000  sysload=0.08 cputime=207.613 memavail=7296940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.2 pwm=0.000
Stats 792419.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688788 bytes_read=1507172 bytes_retransmit=9 bytes_invalid=0 send_seq=106871 receive_seq=106871 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992806 heater_bed: target=0 temp=66.3 pwm=0.000  sysload=0.31 cputime=207.635 memavail=7296940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.0 pwm=0.000
Stats 792420.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688794 bytes_read=1507293 bytes_retransmit=9 bytes_invalid=0 send_seq=106872 receive_seq=106872 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=0 temp=66.4 pwm=0.000  sysload=0.31 cputime=207.656 memavail=7296940 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.6 pwm=0.000
Stats 792421.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688800 bytes_read=1507399 bytes_retransmit=9 bytes_invalid=0 send_seq=106873 receive_seq=106873 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=0 temp=66.3 pwm=0.000  sysload=0.31 cputime=207.674 memavail=7296716 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.4 pwm=0.000
Stats 792422.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688806 bytes_read=1507534 bytes_retransmit=9 bytes_invalid=0 send_seq=106874 receive_seq=106874 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=0 temp=66.2 pwm=0.000  sysload=0.31 cputime=207.693 memavail=7296716 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.1 pwm=0.000
Stats 792423.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688812 bytes_read=1507655 bytes_retransmit=9 bytes_invalid=0 send_seq=106875 receive_seq=106875 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=0 temp=66.2 pwm=0.000  sysload=0.31 cputime=207.713 memavail=7296716 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.8 pwm=0.000
Stats 792424.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688818 bytes_read=1507761 bytes_retransmit=9 bytes_invalid=0 send_seq=106876 receive_seq=106876 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=0 temp=66.2 pwm=0.000  sysload=0.37 cputime=207.736 memavail=7296716 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.5 pwm=0.000
Stats 792425.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688824 bytes_read=1507882 bytes_retransmit=9 bytes_invalid=0 send_seq=106877 receive_seq=106877 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992810 heater_bed: target=0 temp=66.1 pwm=0.000  sysload=0.37 cputime=207.757 memavail=7295960 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.3 pwm=0.000
Stats 792426.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688830 bytes_read=1508003 bytes_retransmit=9 bytes_invalid=0 send_seq=106878 receive_seq=106878 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=0 temp=66.0 pwm=0.000  sysload=0.37 cputime=207.776 memavail=7295960 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.0 pwm=0.000
Stats 792427.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688842 bytes_read=1508139 bytes_retransmit=9 bytes_invalid=0 send_seq=106880 receive_seq=106880 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992825 heater_bed: target=0 temp=66.0 pwm=0.000  sysload=0.37 cputime=207.804 memavail=7295960 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.7 pwm=0.000
Stats 792428.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688848 bytes_read=1508260 bytes_retransmit=9 bytes_invalid=0 send_seq=106881 receive_seq=106881 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=0 temp=66.0 pwm=0.000  sysload=0.37 cputime=207.829 memavail=7295960 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.5 pwm=0.000
Stats 792429.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688854 bytes_read=1508381 bytes_retransmit=9 bytes_invalid=0 send_seq=106882 receive_seq=106882 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992806 heater_bed: target=0 temp=65.9 pwm=0.000  sysload=0.42 cputime=207.858 memavail=7295960 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.1 pwm=0.000
Stats 792430.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688860 bytes_read=1508487 bytes_retransmit=9 bytes_invalid=0 send_seq=106883 receive_seq=106883 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992799 heater_bed: target=0 temp=65.9 pwm=0.000  sysload=0.42 cputime=207.882 memavail=7295960 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.8 pwm=0.000
Stats 792431.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688866 bytes_read=1508608 bytes_retransmit=9 bytes_invalid=0 send_seq=106884 receive_seq=106884 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=0 temp=65.8 pwm=0.000  sysload=0.42 cputime=207.910 memavail=7295960 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.6 pwm=0.000
Stats 792432.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688872 bytes_read=1508743 bytes_retransmit=9 bytes_invalid=0 send_seq=106885 receive_seq=106885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=0 temp=65.7 pwm=0.000  sysload=0.42 cputime=207.935 memavail=7295960 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.3 pwm=0.000
Stats 792433.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688878 bytes_read=1508849 bytes_retransmit=9 bytes_invalid=0 send_seq=106886 receive_seq=106886 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=0 temp=65.7 pwm=0.000  sysload=0.42 cputime=207.955 memavail=7295960 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.1 pwm=0.000
Stats 792434.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688884 bytes_read=1508970 bytes_retransmit=9 bytes_invalid=0 send_seq=106887 receive_seq=106887 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=0 temp=65.6 pwm=0.000  sysload=0.39 cputime=207.977 memavail=7295960 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.8 pwm=0.000
Stats 792435.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688890 bytes_read=1509091 bytes_retransmit=9 bytes_invalid=0 send_seq=106888 receive_seq=106888 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=0 temp=65.6 pwm=0.000  sysload=0.39 cputime=208.003 memavail=7295968 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.5 pwm=0.000
Stats 792436.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688896 bytes_read=1509197 bytes_retransmit=9 bytes_invalid=0 send_seq=106889 receive_seq=106889 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=0 temp=65.5 pwm=0.000  sysload=0.39 cputime=208.026 memavail=7295520 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.2 pwm=0.000
Stats 792437.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688902 bytes_read=1509332 bytes_retransmit=9 bytes_invalid=0 send_seq=106890 receive_seq=106890 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=0 temp=65.5 pwm=0.000  sysload=0.39 cputime=208.053 memavail=7295520 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.9 pwm=0.000
Stats 792438.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688908 bytes_read=1509453 bytes_retransmit=9 bytes_invalid=0 send_seq=106891 receive_seq=106891 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=0 temp=65.4 pwm=0.000  sysload=0.39 cputime=208.075 memavail=7295520 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.6 pwm=0.000
Stats 792439.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688914 bytes_read=1509559 bytes_retransmit=9 bytes_invalid=0 send_seq=106892 receive_seq=106892 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=0 temp=65.4 pwm=0.000  sysload=0.35 cputime=208.093 memavail=7295520 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.4 pwm=0.000
Stats 792440.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688920 bytes_read=1509673 bytes_retransmit=9 bytes_invalid=0 send_seq=106893 receive_seq=106893 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992768 heater_bed: target=0 temp=65.3 pwm=0.000  sysload=0.35 cputime=208.121 memavail=7295296 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.2 pwm=0.000
Stats 792441.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688926 bytes_read=1509786 bytes_retransmit=9 bytes_invalid=0 send_seq=106894 receive_seq=106894 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=0 temp=65.3 pwm=0.000  sysload=0.35 cputime=208.148 memavail=7295296 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.8 pwm=0.000
Stats 792442.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688932 bytes_read=1509904 bytes_retransmit=9 bytes_invalid=0 send_seq=106895 receive_seq=106895 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=0 temp=65.2 pwm=0.000  sysload=0.35 cputime=208.169 memavail=7295296 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.6 pwm=0.000
Stats 792443.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688938 bytes_read=1510025 bytes_retransmit=9 bytes_invalid=0 send_seq=106896 receive_seq=106896 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=0 temp=65.2 pwm=0.000  sysload=0.35 cputime=208.190 memavail=7295296 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.4 pwm=0.000
Stats 792444.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688944 bytes_read=1510146 bytes_retransmit=9 bytes_invalid=0 send_seq=106897 receive_seq=106897 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=0 temp=65.2 pwm=0.000  sysload=0.41 cputime=208.213 memavail=7295296 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.1 pwm=0.000
Stats 792445.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688950 bytes_read=1510252 bytes_retransmit=9 bytes_invalid=0 send_seq=106898 receive_seq=106898 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992806 heater_bed: target=0 temp=65.1 pwm=0.000  sysload=0.41 cputime=208.238 memavail=7295304 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.9 pwm=0.000
Stats 792446.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688956 bytes_read=1510373 bytes_retransmit=9 bytes_invalid=0 send_seq=106899 receive_seq=106899 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=0 temp=65.1 pwm=0.000  sysload=0.41 cputime=208.259 memavail=7295304 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.6 pwm=0.000
Stats 792447.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688962 bytes_read=1510508 bytes_retransmit=9 bytes_invalid=0 send_seq=106900 receive_seq=106900 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=0 temp=65.0 pwm=0.000  sysload=0.41 cputime=208.278 memavail=7295304 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.3 pwm=0.000
Stats 792448.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688968 bytes_read=1510614 bytes_retransmit=9 bytes_invalid=0 send_seq=106901 receive_seq=106901 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=0 temp=64.9 pwm=0.000  sysload=0.41 cputime=208.296 memavail=7295304 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.0 pwm=0.000
Stats 792449.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688974 bytes_read=1510735 bytes_retransmit=9 bytes_invalid=0 send_seq=106902 receive_seq=106902 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992833 heater_bed: target=0 temp=64.9 pwm=0.000  sysload=0.37 cputime=208.322 memavail=7295304 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.8 pwm=0.000
Stats 792450.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688980 bytes_read=1510856 bytes_retransmit=9 bytes_invalid=0 send_seq=106903 receive_seq=106903 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=0 temp=64.8 pwm=0.000  sysload=0.37 cputime=208.347 memavail=7295304 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.5 pwm=0.000
Stats 792451.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688986 bytes_read=1510962 bytes_retransmit=9 bytes_invalid=0 send_seq=106904 receive_seq=106904 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=0 temp=64.8 pwm=0.000  sysload=0.37 cputime=208.366 memavail=7295304 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.3 pwm=0.000
Stats 792452.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688992 bytes_read=1511097 bytes_retransmit=9 bytes_invalid=0 send_seq=106905 receive_seq=106905 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=0 temp=64.8 pwm=0.000  sysload=0.37 cputime=208.384 memavail=7295304 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.0 pwm=0.000
Stats 792453.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4688998 bytes_read=1511218 bytes_retransmit=9 bytes_invalid=0 send_seq=106906 receive_seq=106906 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=0 temp=64.8 pwm=0.000  sysload=0.37 cputime=208.413 memavail=7295304 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.8 pwm=0.000
Stats 792454.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689004 bytes_read=1511324 bytes_retransmit=9 bytes_invalid=0 send_seq=106907 receive_seq=106907 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992806 heater_bed: target=0 temp=64.7 pwm=0.000  sysload=0.34 cputime=208.433 memavail=7295304 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.6 pwm=0.000
Stats 792455.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689010 bytes_read=1511445 bytes_retransmit=9 bytes_invalid=0 send_seq=106908 receive_seq=106908 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992799 heater_bed: target=0 temp=64.6 pwm=0.000  sysload=0.34 cputime=208.452 memavail=7295308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.2 pwm=0.000
Stats 792456.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689016 bytes_read=1511566 bytes_retransmit=9 bytes_invalid=0 send_seq=106909 receive_seq=106909 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=0 temp=64.5 pwm=0.000  sysload=0.34 cputime=208.472 memavail=7295308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.1 pwm=0.000
Stats 792457.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689022 bytes_read=1511686 bytes_retransmit=9 bytes_invalid=0 send_seq=106910 receive_seq=106910 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=0 temp=64.5 pwm=0.000  sysload=0.34 cputime=208.494 memavail=7295308 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.8 pwm=0.000
Stats 792458.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689028 bytes_read=1511822 bytes_retransmit=9 bytes_invalid=0 send_seq=106911 receive_seq=106911 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=0 temp=64.4 pwm=0.000  sysload=0.34 cputime=208.518 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.5 pwm=0.000
Stats 792459.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689034 bytes_read=1511928 bytes_retransmit=9 bytes_invalid=0 send_seq=106912 receive_seq=106912 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=0 temp=64.4 pwm=0.000  sysload=0.32 cputime=208.538 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.2 pwm=0.000
Stats 792460.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689040 bytes_read=1512034 bytes_retransmit=9 bytes_invalid=0 send_seq=106913 receive_seq=106913 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=0 temp=64.4 pwm=0.000  sysload=0.32 cputime=208.554 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.0 pwm=0.000
Stats 792461.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689046 bytes_read=1512170 bytes_retransmit=9 bytes_invalid=0 send_seq=106914 receive_seq=106914 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=0 temp=64.3 pwm=0.000  sysload=0.32 cputime=208.573 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.7 pwm=0.000
Stats 792462.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689052 bytes_read=1512276 bytes_retransmit=9 bytes_invalid=0 send_seq=106915 receive_seq=106915 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=0 temp=64.3 pwm=0.000  sysload=0.32 cputime=208.596 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.5 pwm=0.000
Stats 792463.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689058 bytes_read=1512396 bytes_retransmit=9 bytes_invalid=0 send_seq=106916 receive_seq=106916 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=0 temp=64.3 pwm=0.000  sysload=0.32 cputime=208.618 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.2 pwm=0.000
Stats 792464.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689064 bytes_read=1512532 bytes_retransmit=9 bytes_invalid=0 send_seq=106917 receive_seq=106917 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=0 temp=64.2 pwm=0.000  sysload=0.29 cputime=208.639 memavail=7295564 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.9 pwm=0.000
Stats 792465.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689070 bytes_read=1512638 bytes_retransmit=9 bytes_invalid=0 send_seq=106918 receive_seq=106918 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=0 temp=64.2 pwm=0.000  sysload=0.29 cputime=208.655 memavail=7295568 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.7 pwm=0.000
Stats 792466.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689076 bytes_read=1512744 bytes_retransmit=9 bytes_invalid=0 send_seq=106919 receive_seq=106919 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=0 temp=64.1 pwm=0.000  sysload=0.29 cputime=208.678 memavail=7295568 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.5 pwm=0.000
Stats 792467.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689082 bytes_read=1512880 bytes_retransmit=9 bytes_invalid=0 send_seq=106920 receive_seq=106920 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=0 temp=64.1 pwm=0.000  sysload=0.29 cputime=208.703 memavail=7295344 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.2 pwm=0.000
Stats 792468.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689088 bytes_read=1513000 bytes_retransmit=9 bytes_invalid=0 send_seq=106921 receive_seq=106921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=0 temp=64.0 pwm=0.000  sysload=0.29 cputime=208.727 memavail=7295344 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.9 pwm=0.000
Stats 792469.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689094 bytes_read=1513106 bytes_retransmit=9 bytes_invalid=0 send_seq=106922 receive_seq=106922 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=0 temp=63.9 pwm=0.000  sysload=0.27 cputime=208.746 memavail=7295344 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.7 pwm=0.000
Stats 792470.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689100 bytes_read=1513242 bytes_retransmit=9 bytes_invalid=0 send_seq=106923 receive_seq=106923 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=0 temp=63.9 pwm=0.000  sysload=0.27 cputime=208.767 memavail=7295344 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.4 pwm=0.000
Stats 792471.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689106 bytes_read=1513348 bytes_retransmit=9 bytes_invalid=0 send_seq=106924 receive_seq=106924 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992825 heater_bed: target=0 temp=63.8 pwm=0.000  sysload=0.27 cputime=208.794 memavail=7295344 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.2 pwm=0.000
Stats 792472.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689112 bytes_read=1513454 bytes_retransmit=9 bytes_invalid=0 send_seq=106925 receive_seq=106925 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=0 temp=63.7 pwm=0.000  sysload=0.27 cputime=208.815 memavail=7295344 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.0 pwm=0.000
Stats 792473.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689118 bytes_read=1513604 bytes_retransmit=9 bytes_invalid=0 send_seq=106926 receive_seq=106926 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992811 heater_bed: target=0 temp=63.7 pwm=0.000  sysload=0.27 cputime=208.837 memavail=7295344 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.7 pwm=0.000
Stats 792474.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689124 bytes_read=1513710 bytes_retransmit=9 bytes_invalid=0 send_seq=106927 receive_seq=106927 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=0 temp=63.6 pwm=0.000  sysload=0.25 cputime=208.858 memavail=7295344 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.4 pwm=0.000
Stats 792475.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689130 bytes_read=1513816 bytes_retransmit=9 bytes_invalid=0 send_seq=106928 receive_seq=106928 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=0 temp=63.5 pwm=0.000  sysload=0.25 cputime=208.882 memavail=7295348 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.2 pwm=0.000
Stats 792476.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689136 bytes_read=1513943 bytes_retransmit=9 bytes_invalid=0 send_seq=106929 receive_seq=106929 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=0 temp=63.5 pwm=0.000  sysload=0.25 cputime=208.908 memavail=7295348 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.9 pwm=0.000
Stats 792477.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689142 bytes_read=1514042 bytes_retransmit=9 bytes_invalid=0 send_seq=106930 receive_seq=106930 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=0 temp=63.4 pwm=0.000  sysload=0.25 cputime=208.929 memavail=7295600 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.7 pwm=0.000
Stats 792478.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689148 bytes_read=1514161 bytes_retransmit=9 bytes_invalid=0 send_seq=106931 receive_seq=106931 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=0 temp=63.4 pwm=0.000  sysload=0.25 cputime=208.958 memavail=7293836 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.5 pwm=0.000
Stats 792479.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689154 bytes_read=1514297 bytes_retransmit=9 bytes_invalid=0 send_seq=106932 receive_seq=106932 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=0 temp=63.3 pwm=0.000  sysload=0.23 cputime=208.984 memavail=7293836 print_time=3711.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.2 pwm=0.000
Stats 792480.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689160 bytes_read=1514403 bytes_retransmit=9 bytes_invalid=0 send_seq=106933 receive_seq=106933 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=0 temp=63.3 pwm=0.000  sysload=0.23 cputime=209.017 memavail=7293836 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.0 pwm=0.000
Stats 792481.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689166 bytes_read=1514509 bytes_retransmit=9 bytes_invalid=0 send_seq=106934 receive_seq=106934 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=0 temp=63.2 pwm=0.000  sysload=0.23 cputime=209.040 memavail=7293864 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.7 pwm=0.000
Stats 792482.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689172 bytes_read=1514645 bytes_retransmit=9 bytes_invalid=0 send_seq=106935 receive_seq=106935 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=0 temp=63.1 pwm=0.000  sysload=0.23 cputime=209.063 memavail=7293864 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.5 pwm=0.000
Stats 792483.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689178 bytes_read=1514765 bytes_retransmit=9 bytes_invalid=0 send_seq=106936 receive_seq=106936 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=0 temp=63.1 pwm=0.000  sysload=0.23 cputime=209.091 memavail=7293864 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.2 pwm=0.000
Stats 792484.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689184 bytes_read=1514886 bytes_retransmit=9 bytes_invalid=0 send_seq=106937 receive_seq=106937 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=0 temp=63.0 pwm=0.000  sysload=0.21 cputime=209.117 memavail=7293864 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.0 pwm=0.000
Stats 792485.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689190 bytes_read=1515007 bytes_retransmit=9 bytes_invalid=0 send_seq=106938 receive_seq=106938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=0 temp=62.9 pwm=0.000  sysload=0.21 cputime=209.139 memavail=7294372 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.8 pwm=0.000
Stats 792486.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689196 bytes_read=1515113 bytes_retransmit=9 bytes_invalid=0 send_seq=106939 receive_seq=106939 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=0 temp=62.9 pwm=0.000  sysload=0.21 cputime=209.160 memavail=7297176 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.5 pwm=0.000
Stats 792487.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689202 bytes_read=1515234 bytes_retransmit=9 bytes_invalid=0 send_seq=106940 receive_seq=106940 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=0 temp=62.8 pwm=0.000  sysload=0.21 cputime=209.179 memavail=7296924 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.3 pwm=0.000
Stats 792488.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689214 bytes_read=1515385 bytes_retransmit=9 bytes_invalid=0 send_seq=106942 receive_seq=106942 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992870 heater_bed: target=0 temp=62.7 pwm=0.000  sysload=0.21 cputime=209.204 memavail=7296924 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.0 pwm=0.000
Stats 792489.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689220 bytes_read=1515491 bytes_retransmit=9 bytes_invalid=0 send_seq=106943 receive_seq=106943 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992861 heater_bed: target=0 temp=62.7 pwm=0.000  sysload=0.19 cputime=209.226 memavail=7296924 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.8 pwm=0.000
Stats 792490.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689226 bytes_read=1515612 bytes_retransmit=9 bytes_invalid=0 send_seq=106944 receive_seq=106944 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=0 temp=62.6 pwm=0.000  sysload=0.19 cputime=209.248 memavail=7296924 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.6 pwm=0.000
Stats 792491.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689232 bytes_read=1515733 bytes_retransmit=9 bytes_invalid=0 send_seq=106945 receive_seq=106945 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=0 temp=62.6 pwm=0.000  sysload=0.19 cputime=209.266 memavail=7296924 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.3 pwm=0.000
Stats 792492.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689238 bytes_read=1515839 bytes_retransmit=9 bytes_invalid=0 send_seq=106946 receive_seq=106946 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992866 heater_bed: target=0 temp=62.5 pwm=0.000  sysload=0.19 cputime=209.291 memavail=7296924 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.1 pwm=0.000
Stats 792493.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689244 bytes_read=1515974 bytes_retransmit=9 bytes_invalid=0 send_seq=106947 receive_seq=106947 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992859 heater_bed: target=0 temp=62.4 pwm=0.000  sysload=0.19 cputime=209.313 memavail=7296924 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.8 pwm=0.000
Stats 792494.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689250 bytes_read=1516095 bytes_retransmit=9 bytes_invalid=0 send_seq=106948 receive_seq=106948 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992852 heater_bed: target=0 temp=62.3 pwm=0.000  sysload=0.17 cputime=209.333 memavail=7296924 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.5 pwm=0.000
Stats 792495.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689256 bytes_read=1516201 bytes_retransmit=9 bytes_invalid=0 send_seq=106949 receive_seq=106949 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992842 heater_bed: target=0 temp=62.3 pwm=0.000  sysload=0.17 cputime=209.351 memavail=7295920 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.3 pwm=0.000
Stats 792496.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689262 bytes_read=1516322 bytes_retransmit=9 bytes_invalid=0 send_seq=106950 receive_seq=106950 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=0 temp=62.2 pwm=0.000  sysload=0.17 cputime=209.368 memavail=7295472 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.1 pwm=0.000
Stats 792497.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689268 bytes_read=1516443 bytes_retransmit=9 bytes_invalid=0 send_seq=106951 receive_seq=106951 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992830 heater_bed: target=0 temp=62.1 pwm=0.000  sysload=0.17 cputime=209.391 memavail=7295472 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.8 pwm=0.000
Stats 792498.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689274 bytes_read=1516563 bytes_retransmit=9 bytes_invalid=0 send_seq=106952 receive_seq=106952 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=0 temp=62.1 pwm=0.000  sysload=0.17 cputime=209.412 memavail=7295472 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.6 pwm=0.000
Stats 792499.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689280 bytes_read=1516684 bytes_retransmit=9 bytes_invalid=0 send_seq=106953 receive_seq=106953 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992816 heater_bed: target=0 temp=62.0 pwm=0.000  sysload=0.24 cputime=209.436 memavail=7295472 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.4 pwm=0.000
Stats 792500.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689286 bytes_read=1516805 bytes_retransmit=9 bytes_invalid=0 send_seq=106954 receive_seq=106954 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=0 temp=61.9 pwm=0.000  sysload=0.24 cputime=209.454 memavail=7295220 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.1 pwm=0.000
Stats 792501.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689292 bytes_read=1516911 bytes_retransmit=9 bytes_invalid=0 send_seq=106955 receive_seq=106955 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992873 heater_bed: target=0 temp=61.9 pwm=0.000  sysload=0.24 cputime=209.474 memavail=7295220 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.9 pwm=0.000
Stats 792502.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689298 bytes_read=1517032 bytes_retransmit=9 bytes_invalid=0 send_seq=106956 receive_seq=106956 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992865 heater_bed: target=0 temp=61.8 pwm=0.000  sysload=0.24 cputime=209.491 memavail=7295220 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.7 pwm=0.000
Stats 792503.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689304 bytes_read=1517167 bytes_retransmit=9 bytes_invalid=0 send_seq=106957 receive_seq=106957 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992856 heater_bed: target=0 temp=61.7 pwm=0.000  sysload=0.24 cputime=209.514 memavail=7295220 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.4 pwm=0.000
Stats 792504.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689310 bytes_read=1517273 bytes_retransmit=9 bytes_invalid=0 send_seq=106958 receive_seq=106958 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992858 heater_bed: target=0 temp=61.7 pwm=0.000  sysload=0.22 cputime=209.534 memavail=7295220 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.2 pwm=0.000
Stats 792505.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689316 bytes_read=1517394 bytes_retransmit=9 bytes_invalid=0 send_seq=106959 receive_seq=106959 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992881 heater_bed: target=0 temp=61.6 pwm=0.000  sysload=0.22 cputime=209.552 memavail=7294976 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.0 pwm=0.000
Stats 792506.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689322 bytes_read=1517515 bytes_retransmit=9 bytes_invalid=0 send_seq=106960 receive_seq=106960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=0 temp=61.5 pwm=0.000  sysload=0.22 cputime=209.568 memavail=7294976 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.7 pwm=0.000
Stats 792507.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689328 bytes_read=1517621 bytes_retransmit=9 bytes_invalid=0 send_seq=106961 receive_seq=106961 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992862 heater_bed: target=0 temp=61.4 pwm=0.000  sysload=0.22 cputime=209.590 memavail=7294976 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.4 pwm=0.000
Stats 792508.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689334 bytes_read=1517756 bytes_retransmit=9 bytes_invalid=0 send_seq=106962 receive_seq=106962 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992852 heater_bed: target=0 temp=61.4 pwm=0.000  sysload=0.22 cputime=209.614 memavail=7293948 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.3 pwm=0.000
Stats 792509.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689340 bytes_read=1517877 bytes_retransmit=9 bytes_invalid=0 send_seq=106963 receive_seq=106963 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992841 heater_bed: target=0 temp=61.3 pwm=0.000  sysload=0.20 cputime=209.643 memavail=7293948 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.0 pwm=0.000
Stats 792510.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689346 bytes_read=1517983 bytes_retransmit=9 bytes_invalid=0 send_seq=106964 receive_seq=106964 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=0 temp=61.3 pwm=0.000  sysload=0.20 cputime=209.668 memavail=7293948 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.8 pwm=0.000
Stats 792511.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689352 bytes_read=1518101 bytes_retransmit=9 bytes_invalid=0 send_seq=106965 receive_seq=106965 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=0 temp=61.2 pwm=0.000  sysload=0.20 cputime=209.691 memavail=7293948 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.5 pwm=0.000
Stats 792512.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689358 bytes_read=1518214 bytes_retransmit=9 bytes_invalid=0 send_seq=106966 receive_seq=106966 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992868 heater_bed: target=0 temp=61.1 pwm=0.000  sysload=0.20 cputime=209.711 memavail=7293948 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.3 pwm=0.000
Stats 792513.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689364 bytes_read=1518328 bytes_retransmit=9 bytes_invalid=0 send_seq=106967 receive_seq=106967 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992860 heater_bed: target=0 temp=61.1 pwm=0.000  sysload=0.20 cputime=209.728 memavail=7293948 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.1 pwm=0.000
Stats 792514.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689370 bytes_read=1518449 bytes_retransmit=9 bytes_invalid=0 send_seq=106968 receive_seq=106968 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=0 temp=61.0 pwm=0.000  sysload=0.19 cputime=209.745 memavail=7293948 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.8 pwm=0.000
Stats 792515.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689376 bytes_read=1518570 bytes_retransmit=9 bytes_invalid=0 send_seq=106969 receive_seq=106969 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=0 temp=61.0 pwm=0.000  sysload=0.19 cputime=209.768 memavail=7293724 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.5 pwm=0.000
Stats 792516.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689382 bytes_read=1518676 bytes_retransmit=9 bytes_invalid=0 send_seq=106970 receive_seq=106970 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=0 temp=60.9 pwm=0.000  sysload=0.19 cputime=209.789 memavail=7293724 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.4 pwm=0.000
Stats 792517.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689388 bytes_read=1518797 bytes_retransmit=9 bytes_invalid=0 send_seq=106971 receive_seq=106971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992833 heater_bed: target=0 temp=60.8 pwm=0.000  sysload=0.19 cputime=209.809 memavail=7293724 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.2 pwm=0.000
Stats 792518.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689394 bytes_read=1518932 bytes_retransmit=9 bytes_invalid=0 send_seq=106972 receive_seq=106972 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=0 temp=60.8 pwm=0.000  sysload=0.19 cputime=209.830 memavail=7293724 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.9 pwm=0.000
Stats 792519.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689400 bytes_read=1519038 bytes_retransmit=9 bytes_invalid=0 send_seq=106973 receive_seq=106973 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=0 temp=60.8 pwm=0.000  sysload=0.25 cputime=209.855 memavail=7293724 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.7 pwm=0.000
Stats 792520.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689406 bytes_read=1519159 bytes_retransmit=9 bytes_invalid=0 send_seq=106974 receive_seq=106974 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=0 temp=60.7 pwm=0.000  sysload=0.25 cputime=209.883 memavail=7293724 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.4 pwm=0.000
Stats 792521.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689412 bytes_read=1519280 bytes_retransmit=9 bytes_invalid=0 send_seq=106975 receive_seq=106975 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992848 heater_bed: target=0 temp=60.7 pwm=0.000  sysload=0.25 cputime=209.908 memavail=7293724 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.2 pwm=0.000
Stats 792522.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689418 bytes_read=1519386 bytes_retransmit=9 bytes_invalid=0 send_seq=106976 receive_seq=106976 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992841 heater_bed: target=0 temp=60.6 pwm=0.000  sysload=0.25 cputime=209.927 memavail=7293724 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.0 pwm=0.000
Stats 792523.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689424 bytes_read=1519521 bytes_retransmit=9 bytes_invalid=0 send_seq=106977 receive_seq=106977 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=0 temp=60.5 pwm=0.000  sysload=0.25 cputime=209.947 memavail=7293724 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.8 pwm=0.000
Stats 792524.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689430 bytes_read=1519642 bytes_retransmit=9 bytes_invalid=0 send_seq=106978 receive_seq=106978 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992831 heater_bed: target=0 temp=60.5 pwm=0.000  sysload=0.31 cputime=209.967 memavail=7293724 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.5 pwm=0.000
Stats 792525.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689436 bytes_read=1519748 bytes_retransmit=9 bytes_invalid=0 send_seq=106979 receive_seq=106979 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992825 heater_bed: target=0 temp=60.4 pwm=0.000  sysload=0.31 cputime=209.992 memavail=7293984 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.3 pwm=0.000
Stats 792526.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689442 bytes_read=1519869 bytes_retransmit=9 bytes_invalid=0 send_seq=106980 receive_seq=106980 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=0 temp=60.4 pwm=0.000  sysload=0.31 cputime=210.016 memavail=7293984 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.1 pwm=0.000
Stats 792527.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689448 bytes_read=1519990 bytes_retransmit=9 bytes_invalid=0 send_seq=106981 receive_seq=106981 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=0 temp=60.3 pwm=0.000  sysload=0.31 cputime=210.034 memavail=7293984 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.8 pwm=0.000
Stats 792528.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689454 bytes_read=1520110 bytes_retransmit=9 bytes_invalid=0 send_seq=106982 receive_seq=106982 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992852 heater_bed: target=0 temp=60.2 pwm=0.000  sysload=0.31 cputime=210.056 memavail=7293984 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.6 pwm=0.000
Stats 792529.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689460 bytes_read=1520231 bytes_retransmit=9 bytes_invalid=0 send_seq=106983 receive_seq=106983 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=0 temp=60.2 pwm=0.000  sysload=0.29 cputime=210.083 memavail=7294236 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.4 pwm=0.000
Stats 792530.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689466 bytes_read=1520352 bytes_retransmit=9 bytes_invalid=0 send_seq=106984 receive_seq=106984 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=0 temp=60.1 pwm=0.000  sysload=0.29 cputime=210.104 memavail=7294236 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.2 pwm=0.000
Stats 792531.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689472 bytes_read=1520458 bytes_retransmit=9 bytes_invalid=0 send_seq=106985 receive_seq=106985 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992835 heater_bed: target=0 temp=60.0 pwm=0.000  sysload=0.29 cputime=210.126 memavail=7294236 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.0 pwm=0.000
Stats 792532.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689478 bytes_read=1520579 bytes_retransmit=9 bytes_invalid=0 send_seq=106986 receive_seq=106986 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=0 temp=59.9 pwm=0.000  sysload=0.29 cputime=210.150 memavail=7294236 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.8 pwm=0.000
Stats 792533.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689484 bytes_read=1520700 bytes_retransmit=9 bytes_invalid=0 send_seq=106987 receive_seq=106987 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=0 temp=59.9 pwm=0.000  sysload=0.29 cputime=210.171 memavail=7294236 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.5 pwm=0.000
Stats 792534.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689490 bytes_read=1520820 bytes_retransmit=9 bytes_invalid=0 send_seq=106988 receive_seq=106988 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992868 heater_bed: target=0 temp=59.8 pwm=0.000  sysload=0.26 cputime=210.195 memavail=7294236 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.3 pwm=0.000
Stats 792535.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689496 bytes_read=1520941 bytes_retransmit=9 bytes_invalid=0 send_seq=106989 receive_seq=106989 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992865 heater_bed: target=0 temp=59.8 pwm=0.000  sysload=0.26 cputime=210.222 memavail=7294892 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.1 pwm=0.000
Stats 792536.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689502 bytes_read=1521062 bytes_retransmit=9 bytes_invalid=0 send_seq=106990 receive_seq=106990 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992859 heater_bed: target=0 temp=59.7 pwm=0.000  sysload=0.26 cputime=210.246 memavail=7294996 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.9 pwm=0.000
Stats 792537.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689508 bytes_read=1521168 bytes_retransmit=9 bytes_invalid=0 send_seq=106991 receive_seq=106991 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992852 heater_bed: target=0 temp=59.7 pwm=0.000  sysload=0.26 cputime=210.265 memavail=7294996 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.7 pwm=0.000
Stats 792538.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689514 bytes_read=1521289 bytes_retransmit=9 bytes_invalid=0 send_seq=106992 receive_seq=106992 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=0 temp=59.6 pwm=0.000  sysload=0.26 cputime=210.286 memavail=7294996 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.5 pwm=0.000
Stats 792539.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689520 bytes_read=1521424 bytes_retransmit=9 bytes_invalid=0 send_seq=106993 receive_seq=106993 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=0 temp=59.5 pwm=0.000  sysload=0.24 cputime=210.315 memavail=7294996 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.2 pwm=0.000
Stats 792540.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689526 bytes_read=1521530 bytes_retransmit=9 bytes_invalid=0 send_seq=106994 receive_seq=106994 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=0 temp=59.5 pwm=0.000  sysload=0.24 cputime=210.334 memavail=7294996 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.0 pwm=0.000
Stats 792541.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689532 bytes_read=1521651 bytes_retransmit=9 bytes_invalid=0 send_seq=106995 receive_seq=106995 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992894 heater_bed: target=0 temp=59.4 pwm=0.000  sysload=0.24 cputime=210.362 memavail=7294772 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.9 pwm=0.000
Stats 792542.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689538 bytes_read=1521772 bytes_retransmit=9 bytes_invalid=0 send_seq=106996 receive_seq=106996 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992885 heater_bed: target=0 temp=59.4 pwm=0.000  sysload=0.24 cputime=210.394 memavail=7294772 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.6 pwm=0.000
Stats 792543.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689544 bytes_read=1521878 bytes_retransmit=9 bytes_invalid=0 send_seq=106997 receive_seq=106997 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992876 heater_bed: target=0 temp=59.3 pwm=0.000  sysload=0.24 cputime=210.422 memavail=7294772 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.4 pwm=0.000
Stats 792544.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689550 bytes_read=1522013 bytes_retransmit=9 bytes_invalid=0 send_seq=106998 receive_seq=106998 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992880 heater_bed: target=0 temp=59.2 pwm=0.000  sysload=0.22 cputime=210.448 memavail=7294772 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.2 pwm=0.000
Stats 792545.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689556 bytes_read=1522134 bytes_retransmit=9 bytes_invalid=0 send_seq=106999 receive_seq=106999 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=0 temp=59.1 pwm=0.000  sysload=0.22 cputime=210.471 memavail=7295260 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.0 pwm=0.000
Stats 792546.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689562 bytes_read=1522240 bytes_retransmit=9 bytes_invalid=0 send_seq=107000 receive_seq=107000 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992866 heater_bed: target=0 temp=59.1 pwm=0.000  sysload=0.22 cputime=210.497 memavail=7295280 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.8 pwm=0.000
Stats 792547.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689568 bytes_read=1522356 bytes_retransmit=9 bytes_invalid=0 send_seq=107001 receive_seq=107001 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992861 heater_bed: target=0 temp=59.0 pwm=0.000  sysload=0.22 cputime=210.523 memavail=7295280 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.6 pwm=0.000
Stats 792549.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689574 bytes_read=1522469 bytes_retransmit=9 bytes_invalid=0 send_seq=107002 receive_seq=107002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=0 temp=59.0 pwm=0.000  sysload=0.22 cputime=210.542 memavail=7295280 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.4 pwm=0.000
Stats 792550.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689586 bytes_read=1522600 bytes_retransmit=9 bytes_invalid=0 send_seq=107004 receive_seq=107004 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992881 heater_bed: target=0 temp=58.9 pwm=0.000  sysload=0.20 cputime=210.562 memavail=7295280 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.2 pwm=0.000
Stats 792551.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689592 bytes_read=1522721 bytes_retransmit=9 bytes_invalid=0 send_seq=107005 receive_seq=107005 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=0 temp=58.8 pwm=0.000  sysload=0.20 cputime=210.579 memavail=7295280 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.0 pwm=0.000
Stats 792552.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689598 bytes_read=1522842 bytes_retransmit=9 bytes_invalid=0 send_seq=107006 receive_seq=107006 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=0 temp=58.8 pwm=0.000  sysload=0.20 cputime=210.599 memavail=7295440 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.8 pwm=0.000
Stats 792553.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689604 bytes_read=1522948 bytes_retransmit=9 bytes_invalid=0 send_seq=107007 receive_seq=107007 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=0 temp=58.7 pwm=0.000  sysload=0.20 cputime=210.618 memavail=7295532 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.6 pwm=0.000
Stats 792554.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689610 bytes_read=1523069 bytes_retransmit=9 bytes_invalid=0 send_seq=107008 receive_seq=107008 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=0 temp=58.7 pwm=0.000  sysload=0.20 cputime=210.645 memavail=7295532 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.4 pwm=0.000
Stats 792555.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689616 bytes_read=1523204 bytes_retransmit=9 bytes_invalid=0 send_seq=107009 receive_seq=107009 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992903 heater_bed: target=0 temp=58.6 pwm=0.000  sysload=0.19 cputime=210.672 memavail=7295532 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.2 pwm=0.000
Stats 792556.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689622 bytes_read=1523310 bytes_retransmit=9 bytes_invalid=0 send_seq=107010 receive_seq=107010 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992892 heater_bed: target=0 temp=58.6 pwm=0.000  sysload=0.19 cputime=210.691 memavail=7294804 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.0 pwm=0.000
Stats 792557.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689628 bytes_read=1523431 bytes_retransmit=9 bytes_invalid=0 send_seq=107011 receive_seq=107011 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992884 heater_bed: target=0 temp=58.5 pwm=0.000  sysload=0.19 cputime=210.718 memavail=7294584 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.8 pwm=0.000
Stats 792558.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689634 bytes_read=1523552 bytes_retransmit=9 bytes_invalid=0 send_seq=107012 receive_seq=107012 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992875 heater_bed: target=0 temp=58.4 pwm=0.000  sysload=0.19 cputime=210.743 memavail=7294360 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.6 pwm=0.000
Stats 792559.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689640 bytes_read=1523658 bytes_retransmit=9 bytes_invalid=0 send_seq=107013 receive_seq=107013 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992929 heater_bed: target=0 temp=58.4 pwm=0.000  sysload=0.19 cputime=210.766 memavail=7294360 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.4 pwm=0.000
Stats 792560.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689646 bytes_read=1523793 bytes_retransmit=9 bytes_invalid=0 send_seq=107014 receive_seq=107014 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992918 heater_bed: target=0 temp=58.3 pwm=0.000  sysload=0.17 cputime=210.792 memavail=7294360 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.2 pwm=0.000
Stats 792561.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689652 bytes_read=1523914 bytes_retransmit=9 bytes_invalid=0 send_seq=107015 receive_seq=107015 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992908 heater_bed: target=0 temp=58.3 pwm=0.000  sysload=0.17 cputime=210.819 memavail=7294360 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.0 pwm=0.000
Stats 792562.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689658 bytes_read=1524020 bytes_retransmit=9 bytes_invalid=0 send_seq=107016 receive_seq=107016 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992899 heater_bed: target=0 temp=58.2 pwm=0.000  sysload=0.17 cputime=210.841 memavail=7294360 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.8 pwm=0.000
Stats 792563.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689664 bytes_read=1524141 bytes_retransmit=9 bytes_invalid=0 send_seq=107017 receive_seq=107017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992891 heater_bed: target=0 temp=58.2 pwm=0.000  sysload=0.17 cputime=210.862 memavail=7294360 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.7 pwm=0.000
Stats 792564.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689670 bytes_read=1524262 bytes_retransmit=9 bytes_invalid=0 send_seq=107018 receive_seq=107018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992883 heater_bed: target=0 temp=58.1 pwm=0.000  sysload=0.17 cputime=210.883 memavail=7294360 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.4 pwm=0.000
Stats 792565.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689676 bytes_read=1524382 bytes_retransmit=9 bytes_invalid=0 send_seq=107019 receive_seq=107019 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992875 heater_bed: target=0 temp=58.1 pwm=0.000  sysload=0.16 cputime=210.901 memavail=7294360 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.2 pwm=0.000
Stats 792566.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689682 bytes_read=1524503 bytes_retransmit=9 bytes_invalid=0 send_seq=107020 receive_seq=107020 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992867 heater_bed: target=0 temp=58.0 pwm=0.000  sysload=0.16 cputime=210.931 memavail=7294360 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.1 pwm=0.000
Stats 792567.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689688 bytes_read=1524624 bytes_retransmit=9 bytes_invalid=0 send_seq=107021 receive_seq=107021 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992861 heater_bed: target=0 temp=58.0 pwm=0.000  sysload=0.16 cputime=210.955 memavail=7294368 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.8 pwm=0.000
Stats 792568.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689694 bytes_read=1524730 bytes_retransmit=9 bytes_invalid=0 send_seq=107022 receive_seq=107022 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992902 heater_bed: target=0 temp=57.9 pwm=0.000  sysload=0.16 cputime=210.980 memavail=7294368 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.7 pwm=0.000
Stats 792569.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689700 bytes_read=1524851 bytes_retransmit=9 bytes_invalid=0 send_seq=107023 receive_seq=107023 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992900 heater_bed: target=0 temp=57.8 pwm=0.000  sysload=0.16 cputime=211.001 memavail=7294368 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.5 pwm=0.000
Stats 792570.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689706 bytes_read=1524986 bytes_retransmit=9 bytes_invalid=0 send_seq=107024 receive_seq=107024 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992891 heater_bed: target=0 temp=57.8 pwm=0.000  sysload=0.15 cputime=211.026 memavail=7294144 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.3 pwm=0.000
Stats 792571.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689712 bytes_read=1525092 bytes_retransmit=9 bytes_invalid=0 send_seq=107025 receive_seq=107025 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992883 heater_bed: target=0 temp=57.7 pwm=0.000  sysload=0.15 cputime=211.050 memavail=7294144 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.1 pwm=0.000
Stats 792572.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689718 bytes_read=1525213 bytes_retransmit=9 bytes_invalid=0 send_seq=107026 receive_seq=107026 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992875 heater_bed: target=0 temp=57.7 pwm=0.000  sysload=0.15 cputime=211.073 memavail=7294144 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.9 pwm=0.000
Stats 792573.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689724 bytes_read=1525334 bytes_retransmit=9 bytes_invalid=0 send_seq=107027 receive_seq=107027 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992867 heater_bed: target=0 temp=57.6 pwm=0.000  sysload=0.15 cputime=211.092 memavail=7294144 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.7 pwm=0.000
Stats 792574.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689730 bytes_read=1525440 bytes_retransmit=9 bytes_invalid=0 send_seq=107028 receive_seq=107028 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992861 heater_bed: target=0 temp=57.6 pwm=0.000  sysload=0.15 cputime=211.116 memavail=7294144 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.5 pwm=0.000
Stats 792575.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689736 bytes_read=1525575 bytes_retransmit=9 bytes_invalid=0 send_seq=107029 receive_seq=107029 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=0 temp=57.5 pwm=0.000  sysload=0.13 cputime=211.143 memavail=7294144 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.4 pwm=0.000
Stats 792576.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689742 bytes_read=1525696 bytes_retransmit=9 bytes_invalid=0 send_seq=107030 receive_seq=107030 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992850 heater_bed: target=0 temp=57.5 pwm=0.000  sysload=0.13 cputime=211.165 memavail=7294144 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.1 pwm=0.000
Stats 792577.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689748 bytes_read=1525802 bytes_retransmit=9 bytes_invalid=0 send_seq=107031 receive_seq=107031 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992870 heater_bed: target=0 temp=57.4 pwm=0.000  sysload=0.13 cputime=211.183 memavail=7294148 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.0 pwm=0.000
Stats 792578.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689754 bytes_read=1525923 bytes_retransmit=9 bytes_invalid=0 send_seq=107032 receive_seq=107032 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=0 temp=57.4 pwm=0.000  sysload=0.13 cputime=211.208 memavail=7294148 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.8 pwm=0.000
Stats 792579.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689760 bytes_read=1526044 bytes_retransmit=9 bytes_invalid=0 send_seq=107033 receive_seq=107033 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=0 temp=57.3 pwm=0.000  sysload=0.13 cputime=211.231 memavail=7294148 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.6 pwm=0.000
Stats 792580.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689766 bytes_read=1526164 bytes_retransmit=9 bytes_invalid=0 send_seq=107034 receive_seq=107034 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=0 temp=57.3 pwm=0.000  sysload=0.20 cputime=211.251 memavail=7294148 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.4 pwm=0.000
Stats 792581.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689772 bytes_read=1526285 bytes_retransmit=9 bytes_invalid=0 send_seq=107035 receive_seq=107035 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=0 temp=57.2 pwm=0.000  sysload=0.20 cputime=211.268 memavail=7294148 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.3 pwm=0.000
Stats 792582.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689778 bytes_read=1526406 bytes_retransmit=9 bytes_invalid=0 send_seq=107036 receive_seq=107036 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992842 heater_bed: target=0 temp=57.2 pwm=0.000  sysload=0.20 cputime=211.291 memavail=7294148 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.1 pwm=0.000
Stats 792583.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689784 bytes_read=1526512 bytes_retransmit=9 bytes_invalid=0 send_seq=107037 receive_seq=107037 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=0 temp=57.1 pwm=0.000  sysload=0.20 cputime=211.314 memavail=7294148 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.9 pwm=0.000
Stats 792584.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689790 bytes_read=1526627 bytes_retransmit=9 bytes_invalid=0 send_seq=107038 receive_seq=107038 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992834 heater_bed: target=0 temp=57.0 pwm=0.000  sysload=0.20 cputime=211.337 memavail=7294148 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.8 pwm=0.000
Stats 792585.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689796 bytes_read=1526754 bytes_retransmit=9 bytes_invalid=0 send_seq=107039 receive_seq=107039 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992831 heater_bed: target=0 temp=57.0 pwm=0.000  sysload=0.19 cputime=211.359 memavail=7294148 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.6 pwm=0.000
Stats 792586.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689802 bytes_read=1526857 bytes_retransmit=9 bytes_invalid=0 send_seq=107040 receive_seq=107040 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992880 heater_bed: target=0 temp=57.0 pwm=0.000  sysload=0.19 cputime=211.378 memavail=7293896 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.4 pwm=0.000
Stats 792587.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689808 bytes_read=1526978 bytes_retransmit=9 bytes_invalid=0 send_seq=107041 receive_seq=107041 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=0 temp=56.9 pwm=0.000  sysload=0.19 cputime=211.395 memavail=7293900 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.3 pwm=0.000
Stats 792588.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689814 bytes_read=1527099 bytes_retransmit=9 bytes_invalid=0 send_seq=107042 receive_seq=107042 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992867 heater_bed: target=0 temp=56.8 pwm=0.000  sysload=0.19 cputime=211.418 memavail=7293900 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.0 pwm=0.000
Stats 792589.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689820 bytes_read=1527205 bytes_retransmit=9 bytes_invalid=0 send_seq=107043 receive_seq=107043 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992862 heater_bed: target=0 temp=56.8 pwm=0.000  sysload=0.19 cputime=211.439 memavail=7293676 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.9 pwm=0.000
Stats 792590.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689826 bytes_read=1527340 bytes_retransmit=9 bytes_invalid=0 send_seq=107044 receive_seq=107044 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992858 heater_bed: target=0 temp=56.7 pwm=0.000  sysload=0.17 cputime=211.458 memavail=7293676 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.7 pwm=0.000
Stats 792591.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689832 bytes_read=1527461 bytes_retransmit=9 bytes_invalid=0 send_seq=107045 receive_seq=107045 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=0 temp=56.7 pwm=0.000  sysload=0.17 cputime=211.475 memavail=7293676 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.5 pwm=0.000
Stats 792592.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689838 bytes_read=1527567 bytes_retransmit=9 bytes_invalid=0 send_seq=107046 receive_seq=107046 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=0 temp=56.6 pwm=0.000  sysload=0.17 cputime=211.491 memavail=7293676 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.4 pwm=0.000
Stats 792593.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689844 bytes_read=1527703 bytes_retransmit=9 bytes_invalid=0 send_seq=107047 receive_seq=107047 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=0 temp=56.6 pwm=0.000  sysload=0.17 cputime=211.513 memavail=7293676 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.2 pwm=0.000
Stats 792594.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689850 bytes_read=1527809 bytes_retransmit=9 bytes_invalid=0 send_seq=107048 receive_seq=107048 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=0 temp=56.5 pwm=0.000  sysload=0.17 cputime=211.533 memavail=7293676 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.0 pwm=0.000
Stats 792595.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689856 bytes_read=1527929 bytes_retransmit=9 bytes_invalid=0 send_seq=107049 receive_seq=107049 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=0 temp=56.5 pwm=0.000  sysload=0.16 cputime=211.559 memavail=7293676 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.8 pwm=0.000
Stats 792596.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689862 bytes_read=1528065 bytes_retransmit=9 bytes_invalid=0 send_seq=107050 receive_seq=107050 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992866 heater_bed: target=0 temp=56.4 pwm=0.000  sysload=0.16 cputime=211.584 memavail=7293572 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.6 pwm=0.000
Stats 792597.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689868 bytes_read=1528171 bytes_retransmit=9 bytes_invalid=0 send_seq=107051 receive_seq=107051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992860 heater_bed: target=0 temp=56.3 pwm=0.000  sysload=0.16 cputime=211.611 memavail=7293680 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.5 pwm=0.000
Stats 792598.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689874 bytes_read=1528277 bytes_retransmit=9 bytes_invalid=0 send_seq=107052 receive_seq=107052 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=0 temp=56.3 pwm=0.000  sysload=0.16 cputime=211.640 memavail=7293680 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.3 pwm=0.000
Stats 792599.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689880 bytes_read=1528413 bytes_retransmit=9 bytes_invalid=0 send_seq=107053 receive_seq=107053 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992855 heater_bed: target=0 temp=56.3 pwm=0.000  sysload=0.16 cputime=211.662 memavail=7293680 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.2 pwm=0.000
Stats 792600.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689886 bytes_read=1528519 bytes_retransmit=9 bytes_invalid=0 send_seq=107054 receive_seq=107054 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=0 temp=56.2 pwm=0.000  sysload=0.14 cputime=211.684 memavail=7293940 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.0 pwm=0.000
Stats 792601.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689892 bytes_read=1528639 bytes_retransmit=9 bytes_invalid=0 send_seq=107055 receive_seq=107055 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=0 temp=56.2 pwm=0.000  sysload=0.14 cputime=211.712 memavail=7293940 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.9 pwm=0.000
Stats 792602.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689898 bytes_read=1528775 bytes_retransmit=9 bytes_invalid=0 send_seq=107056 receive_seq=107056 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=0 temp=56.1 pwm=0.000  sysload=0.14 cputime=211.738 memavail=7293940 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.7 pwm=0.000
Stats 792603.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689904 bytes_read=1528881 bytes_retransmit=9 bytes_invalid=0 send_seq=107057 receive_seq=107057 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992843 heater_bed: target=0 temp=56.0 pwm=0.000  sysload=0.14 cputime=211.760 memavail=7293940 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.5 pwm=0.000
Stats 792604.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689910 bytes_read=1528987 bytes_retransmit=9 bytes_invalid=0 send_seq=107058 receive_seq=107058 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992887 heater_bed: target=0 temp=56.0 pwm=0.000  sysload=0.14 cputime=211.781 memavail=7293940 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.4 pwm=0.000
Stats 792605.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689916 bytes_read=1529123 bytes_retransmit=9 bytes_invalid=0 send_seq=107059 receive_seq=107059 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992881 heater_bed: target=0 temp=55.9 pwm=0.000  sysload=0.13 cputime=211.802 memavail=7293940 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.2 pwm=0.000
Stats 792606.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689922 bytes_read=1529243 bytes_retransmit=9 bytes_invalid=0 send_seq=107060 receive_seq=107060 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992875 heater_bed: target=0 temp=55.9 pwm=0.000  sysload=0.13 cputime=211.819 memavail=7294132 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.0 pwm=0.000
Stats 792607.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689928 bytes_read=1529349 bytes_retransmit=9 bytes_invalid=0 send_seq=107061 receive_seq=107061 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=0 temp=55.8 pwm=0.000  sysload=0.13 cputime=211.845 memavail=7294192 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.9 pwm=0.000
Stats 792608.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689934 bytes_read=1529485 bytes_retransmit=9 bytes_invalid=0 send_seq=107062 receive_seq=107062 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992873 heater_bed: target=0 temp=55.8 pwm=0.000  sysload=0.13 cputime=211.872 memavail=7294192 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.7 pwm=0.000
Stats 792609.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689940 bytes_read=1529591 bytes_retransmit=9 bytes_invalid=0 send_seq=107063 receive_seq=107063 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992867 heater_bed: target=0 temp=55.7 pwm=0.000  sysload=0.13 cputime=211.891 memavail=7294192 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.6 pwm=0.000
Stats 792610.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689946 bytes_read=1529697 bytes_retransmit=9 bytes_invalid=0 send_seq=107064 receive_seq=107064 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992864 heater_bed: target=0 temp=55.7 pwm=0.000  sysload=0.12 cputime=211.914 memavail=7293968 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.4 pwm=0.000
Stats 792611.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689952 bytes_read=1529847 bytes_retransmit=9 bytes_invalid=0 send_seq=107065 receive_seq=107065 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992858 heater_bed: target=0 temp=55.6 pwm=0.000  sysload=0.12 cputime=211.941 memavail=7293972 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.2 pwm=0.000
Stats 792612.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689964 bytes_read=1529969 bytes_retransmit=9 bytes_invalid=0 send_seq=107067 receive_seq=107067 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=0 temp=55.6 pwm=0.000  sysload=0.12 cputime=211.968 memavail=7293972 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.1 pwm=0.000
Stats 792613.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689970 bytes_read=1530075 bytes_retransmit=9 bytes_invalid=0 send_seq=107068 receive_seq=107068 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992911 heater_bed: target=0 temp=55.5 pwm=0.000  sysload=0.12 cputime=211.988 memavail=7293972 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.9 pwm=0.000
Stats 792614.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689976 bytes_read=1530211 bytes_retransmit=9 bytes_invalid=0 send_seq=107069 receive_seq=107069 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992904 heater_bed: target=0 temp=55.5 pwm=0.000  sysload=0.12 cputime=212.008 memavail=7293972 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.8 pwm=0.000
Stats 792615.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689982 bytes_read=1530317 bytes_retransmit=9 bytes_invalid=0 send_seq=107070 receive_seq=107070 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992902 heater_bed: target=0 temp=55.4 pwm=0.000  sysload=0.11 cputime=212.031 memavail=7293972 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.6 pwm=0.000
Stats 792616.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689988 bytes_read=1530437 bytes_retransmit=9 bytes_invalid=0 send_seq=107071 receive_seq=107071 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992943 heater_bed: target=0 temp=55.4 pwm=0.000  sysload=0.11 cputime=212.057 memavail=7294120 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.5 pwm=0.000
Stats 792617.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4689994 bytes_read=1530573 bytes_retransmit=9 bytes_invalid=0 send_seq=107072 receive_seq=107072 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992933 heater_bed: target=0 temp=55.3 pwm=0.000  sysload=0.11 cputime=212.077 memavail=7294000 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.3 pwm=0.000
Stats 792618.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690000 bytes_read=1530679 bytes_retransmit=9 bytes_invalid=0 send_seq=107073 receive_seq=107073 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992926 heater_bed: target=0 temp=55.3 pwm=0.000  sysload=0.11 cputime=212.095 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.1 pwm=0.000
Stats 792619.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690006 bytes_read=1530785 bytes_retransmit=9 bytes_invalid=0 send_seq=107074 receive_seq=107074 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992919 heater_bed: target=0 temp=55.2 pwm=0.000  sysload=0.11 cputime=212.121 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.0 pwm=0.000
Stats 792620.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690012 bytes_read=1530912 bytes_retransmit=9 bytes_invalid=0 send_seq=107075 receive_seq=107075 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=0 temp=55.1 pwm=0.000  sysload=0.18 cputime=212.146 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.8 pwm=0.000
Stats 792621.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690018 bytes_read=1531025 bytes_retransmit=9 bytes_invalid=0 send_seq=107076 receive_seq=107076 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992935 heater_bed: target=0 temp=55.1 pwm=0.000  sysload=0.18 cputime=212.168 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.7 pwm=0.000
Stats 792622.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690024 bytes_read=1531145 bytes_retransmit=9 bytes_invalid=0 send_seq=107077 receive_seq=107077 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992926 heater_bed: target=0 temp=55.1 pwm=0.000  sysload=0.18 cputime=212.190 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.5 pwm=0.000
Stats 792623.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690030 bytes_read=1531266 bytes_retransmit=9 bytes_invalid=0 send_seq=107078 receive_seq=107078 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992918 heater_bed: target=0 temp=55.0 pwm=0.000  sysload=0.18 cputime=212.210 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.4 pwm=0.000
Stats 792624.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690036 bytes_read=1531372 bytes_retransmit=9 bytes_invalid=0 send_seq=107079 receive_seq=107079 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992913 heater_bed: target=0 temp=54.9 pwm=0.000  sysload=0.18 cputime=212.235 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.2 pwm=0.000
Stats 792625.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690042 bytes_read=1531493 bytes_retransmit=9 bytes_invalid=0 send_seq=107080 receive_seq=107080 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992936 heater_bed: target=0 temp=54.9 pwm=0.000  sysload=0.17 cputime=212.260 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.1 pwm=0.000
Stats 792626.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690048 bytes_read=1531628 bytes_retransmit=9 bytes_invalid=0 send_seq=107081 receive_seq=107081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992929 heater_bed: target=0 temp=54.9 pwm=0.000  sysload=0.17 cputime=212.281 memavail=7293524 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.9 pwm=0.000
Stats 792627.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690054 bytes_read=1531734 bytes_retransmit=9 bytes_invalid=0 send_seq=107082 receive_seq=107082 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=0 temp=54.8 pwm=0.000  sysload=0.17 cputime=212.298 memavail=7293532 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.8 pwm=0.000
Stats 792628.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690060 bytes_read=1531855 bytes_retransmit=9 bytes_invalid=0 send_seq=107083 receive_seq=107083 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992912 heater_bed: target=0 temp=54.7 pwm=0.000  sysload=0.17 cputime=212.323 memavail=7293532 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.6 pwm=0.000
Stats 792629.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690066 bytes_read=1531976 bytes_retransmit=9 bytes_invalid=0 send_seq=107084 receive_seq=107084 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992908 heater_bed: target=0 temp=54.7 pwm=0.000  sysload=0.17 cputime=212.359 memavail=7290100 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.5 pwm=0.000
Stats 792630.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690072 bytes_read=1532082 bytes_retransmit=9 bytes_invalid=0 send_seq=107085 receive_seq=107085 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992908 heater_bed: target=0 temp=54.7 pwm=0.000  sysload=0.24 cputime=212.386 memavail=7294480 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.3 pwm=0.000
Stats 792631.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690078 bytes_read=1532217 bytes_retransmit=9 bytes_invalid=0 send_seq=107086 receive_seq=107086 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992899 heater_bed: target=0 temp=54.6 pwm=0.000  sysload=0.24 cputime=212.412 memavail=7294480 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.2 pwm=0.000
Stats 792632.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690084 bytes_read=1532338 bytes_retransmit=9 bytes_invalid=0 send_seq=107087 receive_seq=107087 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992889 heater_bed: target=0 temp=54.6 pwm=0.000  sysload=0.24 cputime=212.437 memavail=7294480 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.0 pwm=0.000
Stats 792633.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690090 bytes_read=1532444 bytes_retransmit=9 bytes_invalid=0 send_seq=107088 receive_seq=107088 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992880 heater_bed: target=0 temp=54.5 pwm=0.000  sysload=0.24 cputime=212.457 memavail=7294480 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.9 pwm=0.000
Stats 792634.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690096 bytes_read=1532565 bytes_retransmit=9 bytes_invalid=0 send_seq=107089 receive_seq=107089 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992873 heater_bed: target=0 temp=54.5 pwm=0.000  sysload=0.24 cputime=212.476 memavail=7294480 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.8 pwm=0.000
Stats 792635.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690102 bytes_read=1532686 bytes_retransmit=9 bytes_invalid=0 send_seq=107090 receive_seq=107090 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992869 heater_bed: target=0 temp=54.4 pwm=0.000  sysload=0.22 cputime=212.493 memavail=7294480 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.6 pwm=0.000
Stats 792636.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690108 bytes_read=1532806 bytes_retransmit=9 bytes_invalid=0 send_seq=107091 receive_seq=107091 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992865 heater_bed: target=0 temp=54.4 pwm=0.000  sysload=0.22 cputime=212.510 memavail=7294628 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.4 pwm=0.000
Stats 792637.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690114 bytes_read=1532927 bytes_retransmit=9 bytes_invalid=0 send_seq=107092 receive_seq=107092 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992862 heater_bed: target=0 temp=54.3 pwm=0.000  sysload=0.22 cputime=212.537 memavail=7294736 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.3 pwm=0.000
Stats 792638.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690120 bytes_read=1533048 bytes_retransmit=9 bytes_invalid=0 send_seq=107093 receive_seq=107093 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992860 heater_bed: target=0 temp=54.3 pwm=0.000  sysload=0.22 cputime=212.564 memavail=7294736 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.2 pwm=0.000
Stats 792639.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690126 bytes_read=1533154 bytes_retransmit=9 bytes_invalid=0 send_seq=107094 receive_seq=107094 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=0 temp=54.3 pwm=0.000  sysload=0.22 cputime=212.589 memavail=7294736 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.0 pwm=0.000
Stats 792640.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690132 bytes_read=1533275 bytes_retransmit=9 bytes_invalid=0 send_seq=107095 receive_seq=107095 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992915 heater_bed: target=0 temp=54.2 pwm=0.000  sysload=0.20 cputime=212.610 memavail=7294736 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.9 pwm=0.000
Stats 792641.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690138 bytes_read=1533410 bytes_retransmit=9 bytes_invalid=0 send_seq=107096 receive_seq=107096 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992907 heater_bed: target=0 temp=54.2 pwm=0.000  sysload=0.20 cputime=212.630 memavail=7294736 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.7 pwm=0.000
Stats 792642.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690144 bytes_read=1533516 bytes_retransmit=9 bytes_invalid=0 send_seq=107097 receive_seq=107097 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992901 heater_bed: target=0 temp=54.1 pwm=0.000  sysload=0.20 cputime=212.655 memavail=7294736 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.6 pwm=0.000
Stats 792643.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690150 bytes_read=1533637 bytes_retransmit=9 bytes_invalid=0 send_seq=107098 receive_seq=107098 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992898 heater_bed: target=0 temp=54.1 pwm=0.000  sysload=0.20 cputime=212.682 memavail=7294736 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.5 pwm=0.000
Stats 792644.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690156 bytes_read=1533758 bytes_retransmit=9 bytes_invalid=0 send_seq=107099 receive_seq=107099 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992894 heater_bed: target=0 temp=54.0 pwm=0.000  sysload=0.20 cputime=212.707 memavail=7294736 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.3 pwm=0.000
Stats 792645.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690162 bytes_read=1533864 bytes_retransmit=9 bytes_invalid=0 send_seq=107100 receive_seq=107100 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992890 heater_bed: target=0 temp=54.0 pwm=0.000  sysload=0.18 cputime=212.725 memavail=7294736 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.2 pwm=0.000
Stats 792646.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690168 bytes_read=1533999 bytes_retransmit=9 bytes_invalid=0 send_seq=107101 receive_seq=107101 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992885 heater_bed: target=0 temp=53.9 pwm=0.000  sysload=0.18 cputime=212.745 memavail=7294512 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.1 pwm=0.000
Stats 792647.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690174 bytes_read=1534120 bytes_retransmit=9 bytes_invalid=0 send_seq=107102 receive_seq=107102 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992883 heater_bed: target=0 temp=53.9 pwm=0.000  sysload=0.18 cputime=212.772 memavail=7294512 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.9 pwm=0.000
Stats 792648.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690180 bytes_read=1534226 bytes_retransmit=9 bytes_invalid=0 send_seq=107103 receive_seq=107103 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992927 heater_bed: target=0 temp=53.8 pwm=0.000  sysload=0.18 cputime=212.798 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.8 pwm=0.000
Stats 792649.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690186 bytes_read=1534347 bytes_retransmit=9 bytes_invalid=0 send_seq=107104 receive_seq=107104 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992929 heater_bed: target=0 temp=53.8 pwm=0.000  sysload=0.18 cputime=212.820 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.7 pwm=0.000
Stats 792650.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690192 bytes_read=1534468 bytes_retransmit=9 bytes_invalid=0 send_seq=107105 receive_seq=107105 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=0 temp=53.8 pwm=0.000  sysload=0.17 cputime=212.846 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.5 pwm=0.000
Stats 792651.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690198 bytes_read=1534588 bytes_retransmit=9 bytes_invalid=0 send_seq=107106 receive_seq=107106 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992918 heater_bed: target=0 temp=53.7 pwm=0.000  sysload=0.17 cputime=212.869 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.3 pwm=0.000
Stats 792652.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690204 bytes_read=1534709 bytes_retransmit=9 bytes_invalid=0 send_seq=107107 receive_seq=107107 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992941 heater_bed: target=0 temp=53.7 pwm=0.000  sysload=0.17 cputime=212.898 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.2 pwm=0.000
Stats 792653.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690210 bytes_read=1534830 bytes_retransmit=9 bytes_invalid=0 send_seq=107108 receive_seq=107108 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992935 heater_bed: target=0 temp=53.6 pwm=0.000  sysload=0.17 cputime=212.919 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.0 pwm=0.000
Stats 792654.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690216 bytes_read=1534936 bytes_retransmit=9 bytes_invalid=0 send_seq=107109 receive_seq=107109 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992928 heater_bed: target=0 temp=53.6 pwm=0.000  sysload=0.17 cputime=212.937 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.9 pwm=0.000
Stats 792655.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690222 bytes_read=1535054 bytes_retransmit=9 bytes_invalid=0 send_seq=107110 receive_seq=107110 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=0 temp=53.5 pwm=0.000  sysload=0.15 cputime=212.962 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.8 pwm=0.000
Stats 792656.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690228 bytes_read=1535181 bytes_retransmit=9 bytes_invalid=0 send_seq=107111 receive_seq=107111 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992916 heater_bed: target=0 temp=53.5 pwm=0.000  sysload=0.15 cputime=212.990 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.7 pwm=0.000
Stats 792657.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690234 bytes_read=1535280 bytes_retransmit=9 bytes_invalid=0 send_seq=107112 receive_seq=107112 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992910 heater_bed: target=0 temp=53.4 pwm=0.000  sysload=0.15 cputime=213.016 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.5 pwm=0.000
Stats 792658.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690240 bytes_read=1535401 bytes_retransmit=9 bytes_invalid=0 send_seq=107113 receive_seq=107113 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=0 temp=53.4 pwm=0.000  sysload=0.15 cputime=213.041 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.4 pwm=0.000
Stats 792659.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690246 bytes_read=1535522 bytes_retransmit=9 bytes_invalid=0 send_seq=107114 receive_seq=107114 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992909 heater_bed: target=0 temp=53.4 pwm=0.000  sysload=0.15 cputime=213.069 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.2 pwm=0.000
Stats 792660.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690252 bytes_read=1535628 bytes_retransmit=9 bytes_invalid=0 send_seq=107115 receive_seq=107115 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992906 heater_bed: target=0 temp=53.3 pwm=0.000  sysload=0.14 cputime=213.091 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.1 pwm=0.000
Stats 792661.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690258 bytes_read=1535763 bytes_retransmit=9 bytes_invalid=0 send_seq=107116 receive_seq=107116 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992929 heater_bed: target=0 temp=53.2 pwm=0.000  sysload=0.14 cputime=213.125 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.0 pwm=0.000
Stats 792662.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690264 bytes_read=1535884 bytes_retransmit=9 bytes_invalid=0 send_seq=107117 receive_seq=107117 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992924 heater_bed: target=0 temp=53.2 pwm=0.000  sysload=0.14 cputime=213.155 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.9 pwm=0.000
Stats 792663.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690270 bytes_read=1535990 bytes_retransmit=9 bytes_invalid=0 send_seq=107118 receive_seq=107118 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992916 heater_bed: target=0 temp=53.2 pwm=0.000  sysload=0.14 cputime=213.175 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.8 pwm=0.000
Stats 792664.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690276 bytes_read=1536111 bytes_retransmit=9 bytes_invalid=0 send_seq=107119 receive_seq=107119 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=0 temp=53.0 pwm=0.000  sysload=0.14 cputime=213.194 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000
Stats 792665.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690282 bytes_read=1536232 bytes_retransmit=9 bytes_invalid=0 send_seq=107120 receive_seq=107120 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992916 heater_bed: target=0 temp=53.0 pwm=0.000  sysload=0.13 cputime=213.217 memavail=7294288 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.4 pwm=0.000
Stats 792666.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690288 bytes_read=1536352 bytes_retransmit=9 bytes_invalid=0 send_seq=107121 receive_seq=107121 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992911 heater_bed: target=0 temp=53.0 pwm=0.000  sysload=0.13 cputime=213.244 memavail=7294436 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.3 pwm=0.000
Stats 792667.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690294 bytes_read=1536473 bytes_retransmit=9 bytes_invalid=0 send_seq=107122 receive_seq=107122 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992907 heater_bed: target=0 temp=52.9 pwm=0.000  sysload=0.13 cputime=213.266 memavail=7294552 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.3 pwm=0.000
Stats 792668.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690300 bytes_read=1536594 bytes_retransmit=9 bytes_invalid=0 send_seq=107123 receive_seq=107123 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992902 heater_bed: target=0 temp=52.9 pwm=0.000  sysload=0.13 cputime=213.283 memavail=7294328 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.1 pwm=0.000
Stats 792669.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690306 bytes_read=1536700 bytes_retransmit=9 bytes_invalid=0 send_seq=107124 receive_seq=107124 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992904 heater_bed: target=0 temp=52.8 pwm=0.000  sysload=0.13 cputime=213.300 memavail=7294328 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.0 pwm=0.000
Stats 792670.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690312 bytes_read=1536821 bytes_retransmit=9 bytes_invalid=0 send_seq=107125 receive_seq=107125 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992942 heater_bed: target=0 temp=52.8 pwm=0.000  sysload=0.12 cputime=213.327 memavail=7294328 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.9 pwm=0.000
Stats 792671.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690318 bytes_read=1536942 bytes_retransmit=9 bytes_invalid=0 send_seq=107126 receive_seq=107126 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992936 heater_bed: target=0 temp=52.8 pwm=0.000  sysload=0.12 cputime=213.348 memavail=7294328 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000
Stats 792672.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690324 bytes_read=1537062 bytes_retransmit=9 bytes_invalid=0 send_seq=107127 receive_seq=107127 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992929 heater_bed: target=0 temp=52.7 pwm=0.000  sysload=0.12 cputime=213.366 memavail=7294328 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.6 pwm=0.000
Stats 792673.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690336 bytes_read=1537199 bytes_retransmit=9 bytes_invalid=0 send_seq=107129 receive_seq=107129 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992922 heater_bed: target=0 temp=52.7 pwm=0.000  sysload=0.12 cputime=213.385 memavail=7294328 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000
Stats 792674.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690342 bytes_read=1537320 bytes_retransmit=9 bytes_invalid=0 send_seq=107130 receive_seq=107130 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992917 heater_bed: target=0 temp=52.6 pwm=0.000  sysload=0.12 cputime=213.402 memavail=7294328 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.4 pwm=0.000
Stats 792675.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690348 bytes_read=1537426 bytes_retransmit=9 bytes_invalid=0 send_seq=107131 receive_seq=107131 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992912 heater_bed: target=0 temp=52.6 pwm=0.000  sysload=0.11 cputime=213.424 memavail=7294328 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.3 pwm=0.000
Stats 792676.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690354 bytes_read=1537547 bytes_retransmit=9 bytes_invalid=0 send_seq=107132 receive_seq=107132 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992913 heater_bed: target=0 temp=52.5 pwm=0.000  sysload=0.11 cputime=213.448 memavail=7294712 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000
Stats 792677.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690360 bytes_read=1537682 bytes_retransmit=9 bytes_invalid=0 send_seq=107133 receive_seq=107133 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992912 heater_bed: target=0 temp=52.5 pwm=0.000  sysload=0.11 cputime=213.468 memavail=7294640 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.0 pwm=0.000
Stats 792678.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690366 bytes_read=1537788 bytes_retransmit=9 bytes_invalid=0 send_seq=107134 receive_seq=107134 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992908 heater_bed: target=0 temp=52.5 pwm=0.000  sysload=0.11 cputime=213.484 memavail=7294640 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.9 pwm=0.000
Stats 792679.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690372 bytes_read=1537909 bytes_retransmit=9 bytes_invalid=0 send_seq=107135 receive_seq=107135 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992904 heater_bed: target=0 temp=52.4 pwm=0.000  sysload=0.11 cputime=213.506 memavail=7294640 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000
Stats 792680.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690378 bytes_read=1538030 bytes_retransmit=9 bytes_invalid=0 send_seq=107136 receive_seq=107136 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992901 heater_bed: target=0 temp=52.4 pwm=0.000  sysload=0.26 cputime=213.529 memavail=7294640 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000
Stats 792681.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690384 bytes_read=1538136 bytes_retransmit=9 bytes_invalid=0 send_seq=107137 receive_seq=107137 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992898 heater_bed: target=0 temp=52.3 pwm=0.000  sysload=0.26 cputime=213.549 memavail=7294640 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000
Stats 792682.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690390 bytes_read=1538271 bytes_retransmit=9 bytes_invalid=0 send_seq=107138 receive_seq=107138 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992897 heater_bed: target=0 temp=52.3 pwm=0.000  sysload=0.26 cputime=213.568 memavail=7294640 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.4 pwm=0.000
Stats 792683.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690396 bytes_read=1538392 bytes_retransmit=9 bytes_invalid=0 send_seq=107139 receive_seq=107139 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=0 temp=52.2 pwm=0.000  sysload=0.26 cputime=213.585 memavail=7294640 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.3 pwm=0.000
Stats 792684.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690402 bytes_read=1538498 bytes_retransmit=9 bytes_invalid=0 send_seq=107140 receive_seq=107140 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992892 heater_bed: target=0 temp=52.2 pwm=0.000  sysload=0.26 cputime=213.606 memavail=7294416 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000
Stats 792685.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690408 bytes_read=1538619 bytes_retransmit=9 bytes_invalid=0 send_seq=107141 receive_seq=107141 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992889 heater_bed: target=0 temp=52.2 pwm=0.000  sysload=0.24 cputime=213.627 memavail=7294416 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000
Stats 792686.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690414 bytes_read=1538740 bytes_retransmit=9 bytes_invalid=0 send_seq=107142 receive_seq=107142 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992890 heater_bed: target=0 temp=52.1 pwm=0.000  sysload=0.24 cputime=213.646 memavail=7293912 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000
Stats 792687.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690420 bytes_read=1538860 bytes_retransmit=9 bytes_invalid=0 send_seq=107143 receive_seq=107143 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992941 heater_bed: target=0 temp=52.1 pwm=0.000  sysload=0.24 cputime=213.669 memavail=7293920 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000
Stats 792688.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690426 bytes_read=1538981 bytes_retransmit=9 bytes_invalid=0 send_seq=107144 receive_seq=107144 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992935 heater_bed: target=0 temp=52.0 pwm=0.000  sysload=0.24 cputime=213.692 memavail=7293920 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.7 pwm=0.000
Stats 792689.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690432 bytes_read=1539102 bytes_retransmit=9 bytes_invalid=0 send_seq=107145 receive_seq=107145 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992930 heater_bed: target=0 temp=52.0 pwm=0.000  sysload=0.24 cputime=213.714 memavail=7293920 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000
Stats 792690.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690438 bytes_read=1539208 bytes_retransmit=9 bytes_invalid=0 send_seq=107146 receive_seq=107146 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992928 heater_bed: target=0 temp=51.9 pwm=0.000  sysload=0.22 cputime=213.732 memavail=7293920 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000
Stats 792691.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690444 bytes_read=1539324 bytes_retransmit=9 bytes_invalid=0 send_seq=107147 receive_seq=107147 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992970 heater_bed: target=0 temp=51.9 pwm=0.000  sysload=0.22 cputime=213.751 memavail=7293920 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.4 pwm=0.000
Stats 792692.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690450 bytes_read=1539451 bytes_retransmit=9 bytes_invalid=0 send_seq=107148 receive_seq=107148 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992963 heater_bed: target=0 temp=51.9 pwm=0.000  sysload=0.22 cputime=213.771 memavail=7293920 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000
Stats 792693.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690456 bytes_read=1539552 bytes_retransmit=9 bytes_invalid=0 send_seq=107149 receive_seq=107149 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992957 heater_bed: target=0 temp=51.8 pwm=0.000  sysload=0.22 cputime=213.795 memavail=7293920 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000
Stats 792694.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690462 bytes_read=1539673 bytes_retransmit=9 bytes_invalid=0 send_seq=107150 receive_seq=107150 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992950 heater_bed: target=0 temp=51.8 pwm=0.000  sysload=0.22 cputime=213.817 memavail=7293920 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000
Stats 792695.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690468 bytes_read=1539794 bytes_retransmit=9 bytes_invalid=0 send_seq=107151 receive_seq=107151 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992944 heater_bed: target=0 temp=51.8 pwm=0.000  sysload=0.28 cputime=213.839 memavail=7293920 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000
Stats 792696.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690474 bytes_read=1539900 bytes_retransmit=9 bytes_invalid=0 send_seq=107152 receive_seq=107152 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992938 heater_bed: target=0 temp=51.7 pwm=0.000  sysload=0.28 cputime=213.862 memavail=7293668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000
Stats 792697.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690480 bytes_read=1540035 bytes_retransmit=9 bytes_invalid=0 send_seq=107153 receive_seq=107153 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992933 heater_bed: target=0 temp=51.6 pwm=0.000  sysload=0.28 cputime=213.887 memavail=7293668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.7 pwm=0.000
Stats 792698.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690486 bytes_read=1540156 bytes_retransmit=9 bytes_invalid=0 send_seq=107154 receive_seq=107154 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992927 heater_bed: target=0 temp=51.6 pwm=0.000  sysload=0.28 cputime=213.912 memavail=7293668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000
Stats 792699.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690492 bytes_read=1540262 bytes_retransmit=9 bytes_invalid=0 send_seq=107155 receive_seq=107155 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=0 temp=51.6 pwm=0.000  sysload=0.28 cputime=213.937 memavail=7293668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000
Stats 792700.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690498 bytes_read=1540383 bytes_retransmit=9 bytes_invalid=0 send_seq=107156 receive_seq=107156 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992946 heater_bed: target=0 temp=51.5 pwm=0.000  sysload=0.26 cputime=213.956 memavail=7293668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000
Stats 792701.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690504 bytes_read=1540504 bytes_retransmit=9 bytes_invalid=0 send_seq=107157 receive_seq=107157 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992939 heater_bed: target=0 temp=51.4 pwm=0.000  sysload=0.26 cputime=213.977 memavail=7293668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000
Stats 792702.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690510 bytes_read=1540624 bytes_retransmit=9 bytes_invalid=0 send_seq=107158 receive_seq=107158 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992933 heater_bed: target=0 temp=51.4 pwm=0.000  sysload=0.26 cputime=214.005 memavail=7293668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000
Stats 792703.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690516 bytes_read=1540745 bytes_retransmit=9 bytes_invalid=0 send_seq=107159 receive_seq=107159 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992930 heater_bed: target=0 temp=51.4 pwm=0.000  sysload=0.26 cputime=214.028 memavail=7293668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000
Stats 792704.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690522 bytes_read=1540866 bytes_retransmit=9 bytes_invalid=0 send_seq=107160 receive_seq=107160 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992927 heater_bed: target=0 temp=51.4 pwm=0.000  sysload=0.26 cputime=214.049 memavail=7293668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000
Stats 792705.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690528 bytes_read=1540972 bytes_retransmit=9 bytes_invalid=0 send_seq=107161 receive_seq=107161 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992924 heater_bed: target=0 temp=51.4 pwm=0.000  sysload=0.24 cputime=214.076 memavail=7293668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000
Stats 792706.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690534 bytes_read=1541093 bytes_retransmit=9 bytes_invalid=0 send_seq=107162 receive_seq=107162 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=0 temp=51.3 pwm=0.000  sysload=0.24 cputime=214.100 memavail=7293668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000
Stats 792707.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690540 bytes_read=1541228 bytes_retransmit=9 bytes_invalid=0 send_seq=107163 receive_seq=107163 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992921 heater_bed: target=0 temp=51.3 pwm=0.000  sysload=0.24 cputime=214.120 memavail=7293672 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000
Stats 792708.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690546 bytes_read=1541334 bytes_retransmit=9 bytes_invalid=0 send_seq=107164 receive_seq=107164 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992918 heater_bed: target=0 temp=51.2 pwm=0.000  sysload=0.24 cputime=214.138 memavail=7293672 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000
Stats 792709.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690552 bytes_read=1541455 bytes_retransmit=9 bytes_invalid=0 send_seq=107165 receive_seq=107165 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992938 heater_bed: target=0 temp=51.2 pwm=0.000  sysload=0.24 cputime=214.160 memavail=7293672 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000
Stats 792710.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690558 bytes_read=1541576 bytes_retransmit=9 bytes_invalid=0 send_seq=107166 receive_seq=107166 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992933 heater_bed: target=0 temp=51.2 pwm=0.000  sysload=0.22 cputime=214.181 memavail=7293676 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000
Stats 792711.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690564 bytes_read=1541682 bytes_retransmit=9 bytes_invalid=0 send_seq=107167 receive_seq=107167 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992929 heater_bed: target=0 temp=51.1 pwm=0.000  sysload=0.22 cputime=214.202 memavail=7293676 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000
Stats 792712.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690570 bytes_read=1541817 bytes_retransmit=9 bytes_invalid=0 send_seq=107168 receive_seq=107168 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992926 heater_bed: target=0 temp=51.1 pwm=0.000  sysload=0.22 cputime=214.220 memavail=7293676 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.0 pwm=0.000
Stats 792713.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690576 bytes_read=1541938 bytes_retransmit=9 bytes_invalid=0 send_seq=107169 receive_seq=107169 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=0 temp=51.1 pwm=0.000  sysload=0.22 cputime=214.240 memavail=7293676 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.9 pwm=0.000
Stats 792714.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690582 bytes_read=1542044 bytes_retransmit=9 bytes_invalid=0 send_seq=107170 receive_seq=107170 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=0 temp=51.1 pwm=0.000  sysload=0.22 cputime=214.264 memavail=7293932 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.8 pwm=0.000
Stats 792715.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690588 bytes_read=1542165 bytes_retransmit=9 bytes_invalid=0 send_seq=107171 receive_seq=107171 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992917 heater_bed: target=0 temp=51.0 pwm=0.000  sysload=0.20 cputime=214.287 memavail=7293708 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.8 pwm=0.000
Stats 792716.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690594 bytes_read=1542286 bytes_retransmit=9 bytes_invalid=0 send_seq=107172 receive_seq=107172 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=0 temp=50.9 pwm=0.000  sysload=0.20 cputime=214.305 memavail=7293648 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.6 pwm=0.000
Stats 792717.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690600 bytes_read=1542406 bytes_retransmit=9 bytes_invalid=0 send_seq=107173 receive_seq=107173 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=0 temp=51.0 pwm=0.000  sysload=0.20 cputime=214.326 memavail=7293960 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 792718.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690606 bytes_read=1542527 bytes_retransmit=9 bytes_invalid=0 send_seq=107174 receive_seq=107174 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992967 heater_bed: target=0 temp=50.8 pwm=0.000  sysload=0.20 cputime=214.346 memavail=7293960 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 792719.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690612 bytes_read=1542648 bytes_retransmit=9 bytes_invalid=0 send_seq=107175 receive_seq=107175 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992961 heater_bed: target=0 temp=50.8 pwm=0.000  sysload=0.20 cputime=214.368 memavail=7293960 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 792720.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690618 bytes_read=1542754 bytes_retransmit=9 bytes_invalid=0 send_seq=107176 receive_seq=107176 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992955 heater_bed: target=0 temp=50.8 pwm=0.000  sysload=0.35 cputime=214.386 memavail=7293960 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000
Stats 792721.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690624 bytes_read=1542875 bytes_retransmit=9 bytes_invalid=0 send_seq=107177 receive_seq=107177 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992955 heater_bed: target=0 temp=50.8 pwm=0.000  sysload=0.35 cputime=214.405 memavail=7293960 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 792722.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690630 bytes_read=1543010 bytes_retransmit=9 bytes_invalid=0 send_seq=107178 receive_seq=107178 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992952 heater_bed: target=0 temp=50.7 pwm=0.000  sysload=0.35 cputime=214.437 memavail=7293960 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000
Stats 792723.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690636 bytes_read=1543116 bytes_retransmit=9 bytes_invalid=0 send_seq=107179 receive_seq=107179 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992947 heater_bed: target=0 temp=50.6 pwm=0.000  sysload=0.35 cputime=214.460 memavail=7293960 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.9 pwm=0.000
Stats 792724.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690642 bytes_read=1543252 bytes_retransmit=9 bytes_invalid=0 send_seq=107180 receive_seq=107180 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992942 heater_bed: target=0 temp=50.6 pwm=0.000  sysload=0.35 cputime=214.484 memavail=7293960 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000
Stats 792725.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690648 bytes_read=1543358 bytes_retransmit=9 bytes_invalid=0 send_seq=107181 receive_seq=107181 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992938 heater_bed: target=0 temp=50.6 pwm=0.000  sysload=0.32 cputime=214.501 memavail=7293960 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.7 pwm=0.000
Stats 792726.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690654 bytes_read=1543464 bytes_retransmit=9 bytes_invalid=0 send_seq=107182 receive_seq=107182 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992940 heater_bed: target=0 temp=50.5 pwm=0.000  sysload=0.32 cputime=214.518 memavail=7293900 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000
Stats 792727.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690660 bytes_read=1543608 bytes_retransmit=9 bytes_invalid=0 send_seq=107183 receive_seq=107183 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992964 heater_bed: target=0 temp=50.5 pwm=0.000  sysload=0.32 cputime=214.539 memavail=7294468 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.5 pwm=0.000
Stats 792728.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690666 bytes_read=1543707 bytes_retransmit=9 bytes_invalid=0 send_seq=107184 receive_seq=107184 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992960 heater_bed: target=0 temp=50.5 pwm=0.000  sysload=0.32 cputime=214.561 memavail=7294468 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
Stats 792729.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690672 bytes_read=1543810 bytes_retransmit=9 bytes_invalid=0 send_seq=107185 receive_seq=107185 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992954 heater_bed: target=0 temp=50.4 pwm=0.000  sysload=0.32 cputime=214.584 memavail=7294468 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
Stats 792730.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690678 bytes_read=1543946 bytes_retransmit=9 bytes_invalid=0 send_seq=107186 receive_seq=107186 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992960 heater_bed: target=0 temp=50.4 pwm=0.000  sysload=0.29 cputime=214.607 memavail=7294468 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000
Stats 792731.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690684 bytes_read=1544052 bytes_retransmit=9 bytes_invalid=0 send_seq=107187 receive_seq=107187 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992956 heater_bed: target=0 temp=50.3 pwm=0.000  sysload=0.29 cputime=214.623 memavail=7294468 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000
Stats 792732.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690690 bytes_read=1544172 bytes_retransmit=9 bytes_invalid=0 send_seq=107188 receive_seq=107188 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992952 heater_bed: target=0 temp=50.2 pwm=0.000  sysload=0.29 cputime=214.649 memavail=7294468 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.1 pwm=0.000
Stats 792733.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690696 bytes_read=1544308 bytes_retransmit=9 bytes_invalid=0 send_seq=107189 receive_seq=107189 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992948 heater_bed: target=0 temp=50.2 pwm=0.000  sysload=0.29 cputime=214.676 memavail=7294468 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000
Stats 792734.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690708 bytes_read=1544430 bytes_retransmit=9 bytes_invalid=0 send_seq=107191 receive_seq=107191 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992942 heater_bed: target=0 temp=50.1 pwm=0.000  sysload=0.29 cputime=214.697 memavail=7294468 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000
Stats 792735.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690714 bytes_read=1544536 bytes_retransmit=9 bytes_invalid=0 send_seq=107192 receive_seq=107192 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992942 heater_bed: target=0 temp=50.1 pwm=0.000  sysload=0.27 cputime=214.721 memavail=7294468 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.8 pwm=0.000
Stats 792736.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690720 bytes_read=1544672 bytes_retransmit=9 bytes_invalid=0 send_seq=107193 receive_seq=107193 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992939 heater_bed: target=0 temp=50.1 pwm=0.000  sysload=0.27 cputime=214.752 memavail=7293992 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.7 pwm=0.000
Stats 792737.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690726 bytes_read=1544792 bytes_retransmit=9 bytes_invalid=0 send_seq=107194 receive_seq=107194 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992935 heater_bed: target=0 temp=50.0 pwm=0.000  sysload=0.27 cputime=214.773 memavail=7294000 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.6 pwm=0.000
Stats 792738.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690732 bytes_read=1544898 bytes_retransmit=9 bytes_invalid=0 send_seq=107195 receive_seq=107195 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992934 heater_bed: target=0 temp=50.0 pwm=0.000  sysload=0.27 cputime=214.797 memavail=7294000 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.5 pwm=0.000
Stats 792739.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690738 bytes_read=1545034 bytes_retransmit=9 bytes_invalid=0 send_seq=107196 receive_seq=107196 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992966 heater_bed: target=0 temp=49.9 pwm=0.000  sysload=0.27 cputime=214.823 memavail=7294000 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000
Stats 792740.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690744 bytes_read=1545140 bytes_retransmit=9 bytes_invalid=0 send_seq=107197 receive_seq=107197 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992959 heater_bed: target=0 temp=49.9 pwm=0.000  sysload=0.25 cputime=214.840 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.3 pwm=0.000
Stats 792741.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690750 bytes_read=1545246 bytes_retransmit=9 bytes_invalid=0 send_seq=107198 receive_seq=107198 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992954 heater_bed: target=0 temp=49.8 pwm=0.000  sysload=0.25 cputime=214.864 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.2 pwm=0.000
Stats 792742.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690756 bytes_read=1545396 bytes_retransmit=9 bytes_invalid=0 send_seq=107199 receive_seq=107199 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992950 heater_bed: target=0 temp=49.8 pwm=0.000  sysload=0.25 cputime=214.884 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.1 pwm=0.000
Stats 792743.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690762 bytes_read=1545502 bytes_retransmit=9 bytes_invalid=0 send_seq=107200 receive_seq=107200 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992948 heater_bed: target=0 temp=49.8 pwm=0.000  sysload=0.25 cputime=214.909 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.1 pwm=0.000
Stats 792744.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690768 bytes_read=1545608 bytes_retransmit=9 bytes_invalid=0 send_seq=107201 receive_seq=107201 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992979 heater_bed: target=0 temp=49.8 pwm=0.000  sysload=0.25 cputime=214.933 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000
Stats 792745.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690774 bytes_read=1545744 bytes_retransmit=9 bytes_invalid=0 send_seq=107202 receive_seq=107202 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992975 heater_bed: target=0 temp=49.7 pwm=0.000  sysload=0.23 cputime=214.954 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.9 pwm=0.000
Stats 792746.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690780 bytes_read=1545850 bytes_retransmit=9 bytes_invalid=0 send_seq=107203 receive_seq=107203 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992970 heater_bed: target=0 temp=49.6 pwm=0.000  sysload=0.23 cputime=214.972 memavail=7293776 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.8 pwm=0.000
Stats 792747.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690786 bytes_read=1545985 bytes_retransmit=9 bytes_invalid=0 send_seq=107204 receive_seq=107204 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992965 heater_bed: target=0 temp=49.6 pwm=0.000  sysload=0.23 cputime=214.995 memavail=7293780 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000
Stats 792748.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690792 bytes_read=1546106 bytes_retransmit=9 bytes_invalid=0 send_seq=107205 receive_seq=107205 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992962 heater_bed: target=0 temp=49.6 pwm=0.000  sysload=0.23 cputime=215.018 memavail=7293780 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.6 pwm=0.000
Stats 792749.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690798 bytes_read=1546212 bytes_retransmit=9 bytes_invalid=0 send_seq=107206 receive_seq=107206 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992958 heater_bed: target=0 temp=49.5 pwm=0.000  sysload=0.23 cputime=215.034 memavail=7293780 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.5 pwm=0.000
Stats 792750.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690804 bytes_read=1546333 bytes_retransmit=9 bytes_invalid=0 send_seq=107207 receive_seq=107207 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992950 heater_bed: target=0 temp=49.5 pwm=0.000  sysload=0.29 cputime=215.053 memavail=7296892 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000
Stats 792751.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690810 bytes_read=1546454 bytes_retransmit=9 bytes_invalid=0 send_seq=107208 receive_seq=107208 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992943 heater_bed: target=0 temp=49.5 pwm=0.000  sysload=0.29 cputime=215.067 memavail=7296892 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000
Stats 792752.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690816 bytes_read=1546560 bytes_retransmit=9 bytes_invalid=0 send_seq=107209 receive_seq=107209 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992937 heater_bed: target=0 temp=49.4 pwm=0.000  sysload=0.29 cputime=215.092 memavail=7296668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000
Stats 792753.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690822 bytes_read=1546695 bytes_retransmit=9 bytes_invalid=0 send_seq=107210 receive_seq=107210 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992937 heater_bed: target=0 temp=49.4 pwm=0.000  sysload=0.29 cputime=215.118 memavail=7296668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000
Stats 792754.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690828 bytes_read=1546816 bytes_retransmit=9 bytes_invalid=0 send_seq=107211 receive_seq=107211 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992931 heater_bed: target=0 temp=49.4 pwm=0.000  sysload=0.29 cputime=215.137 memavail=7296668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.1 pwm=0.000
Stats 792755.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690834 bytes_read=1546922 bytes_retransmit=9 bytes_invalid=0 send_seq=107212 receive_seq=107212 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992928 heater_bed: target=0 temp=49.4 pwm=0.000  sysload=0.35 cputime=215.158 memavail=7296668 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000
Stats 792756.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690840 bytes_read=1547043 bytes_retransmit=9 bytes_invalid=0 send_seq=107213 receive_seq=107213 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992929 heater_bed: target=0 temp=49.3 pwm=0.000  sysload=0.35 cputime=215.177 memavail=7296164 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.9 pwm=0.000
Stats 792757.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690846 bytes_read=1547164 bytes_retransmit=9 bytes_invalid=0 send_seq=107214 receive_seq=107214 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992958 heater_bed: target=0 temp=49.3 pwm=0.000  sysload=0.35 cputime=215.196 memavail=7296168 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.8 pwm=0.000
Stats 792758.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690852 bytes_read=1547284 bytes_retransmit=9 bytes_invalid=0 send_seq=107215 receive_seq=107215 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992956 heater_bed: target=0 temp=49.3 pwm=0.000  sysload=0.35 cputime=215.212 memavail=7296168 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.7 pwm=0.000
Stats 792759.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690858 bytes_read=1547405 bytes_retransmit=9 bytes_invalid=0 send_seq=107216 receive_seq=107216 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992953 heater_bed: target=0 temp=49.2 pwm=0.000  sysload=0.35 cputime=215.236 memavail=7296168 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.6 pwm=0.000
Stats 792760.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690864 bytes_read=1547526 bytes_retransmit=9 bytes_invalid=0 send_seq=107217 receive_seq=107217 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992951 heater_bed: target=0 temp=49.2 pwm=0.000  sysload=0.32 cputime=215.260 memavail=7296168 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.5 pwm=0.000
Stats 792761.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690870 bytes_read=1547632 bytes_retransmit=9 bytes_invalid=0 send_seq=107218 receive_seq=107218 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992950 heater_bed: target=0 temp=49.2 pwm=0.000  sysload=0.32 cputime=215.281 memavail=7296168 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000
Stats 792762.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690876 bytes_read=1547752 bytes_retransmit=9 bytes_invalid=0 send_seq=107219 receive_seq=107219 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992949 heater_bed: target=0 temp=49.1 pwm=0.000  sysload=0.32 cputime=215.300 memavail=7296168 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000
Stats 792763.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690882 bytes_read=1547879 bytes_retransmit=9 bytes_invalid=0 send_seq=107220 receive_seq=107220 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992945 heater_bed: target=0 temp=49.0 pwm=0.000  sysload=0.32 cputime=215.319 memavail=7296168 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000
Stats 792764.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690888 bytes_read=1547978 bytes_retransmit=9 bytes_invalid=0 send_seq=107221 receive_seq=107221 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992941 heater_bed: target=0 temp=49.0 pwm=0.000  sysload=0.32 cputime=215.345 memavail=7295944 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.2 pwm=0.000
Stats 792765.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690894 bytes_read=1548098 bytes_retransmit=9 bytes_invalid=0 send_seq=107222 receive_seq=107222 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992939 heater_bed: target=0 temp=49.0 pwm=0.000  sysload=0.29 cputime=215.371 memavail=7295944 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.1 pwm=0.000
Stats 792766.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4690900 bytes_read=1548219 bytes_retransmit=9 bytes_invalid=0 send_seq=107223 receive_seq=107223 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992940 heater_bed: target=0 temp=48.9 pwm=0.000  sysload=0.29 cputime=215.395 memavail=7295692 print_time=4012.507 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.0 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-311-g9e765dae'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sat Nov 18 18:08:46 2023 (1700359726.6 793369.4)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
webhooks client 548342886848: New connection
webhooks client 548342886848: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
Loaded MCU 'mcu' 105 commands (v0.11.0-105-g1e7057e9 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0=P0.28,P0.27 BUS_PINS_i2c1=P0.1,P0.0 BUS_PINS_i2c1a=P0.20,P0.19 BUS_PINS_i2c2=P0.11,P0.10 BUS_PINS_ssp0=P0.17,P0.18,P0.15 BUS_PINS_ssp1=P0.8,P0.9,P0.7 CLOCK_FREQ=120000000 MCU=lpc1769 PWM_MAX=255 RESERVE_PINS_USB=P0.30,P0.29,P2.9 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (0.0, 10.0)     | (27.0, 5.0)
  1   | (35.5, 10.0)    | (62.5, 5.0)
  2   | (71.0, 10.0)    | (98.0, 5.0)
  3   | (106.5, 10.0)   | (133.5, 5.0)
  4   | (142.0, 10.0)   | (169.0, 5.0)
  5   | (177.5, 10.0)   | (204.5, 5.0)
  6   | (213.0, 10.0)   | (240.0, 5.0)
  7   | (213.0, 58.8)   | (240.0, 53.8)
  8   | (177.5, 58.8)   | (204.5, 53.8)
  9   | (142.0, 58.8)   | (169.0, 53.8)
  10  | (106.5, 58.8)   | (133.5, 53.8)
  11  | (71.0, 58.8)    | (98.0, 53.8)
  12  | (35.5, 58.8)    | (62.5, 53.8)
  13  | (0.0, 58.8)     | (27.0, 53.8)
  14  | (0.0, 107.5)    | (27.0, 102.5)
  15  | (35.5, 107.5)   | (62.5, 102.5)
  16  | (71.0, 107.5)   | (98.0, 102.5)
  17  | (106.5, 107.5)  | (133.5, 102.5)
  18  | (142.0, 107.5)  | (169.0, 102.5)
  19  | (177.5, 107.5)  | (204.5, 102.5)
  20  | (213.0, 107.5)  | (240.0, 102.5)
  21  | (213.0, 156.2)  | (240.0, 151.2)
  22  | (177.5, 156.2)  | (204.5, 151.2)
  23  | (142.0, 156.2)  | (169.0, 151.2)
  24  | (106.5, 156.2)  | (133.5, 151.2)
  25  | (71.0, 156.2)   | (98.0, 151.2)
  26  | (35.5, 156.2)   | (62.5, 151.2)
  27  | (0.0, 156.2)    | (27.0, 151.2)
  28  | (0.0, 205.0)    | (27.0, 200.0)
  29  | (35.5, 205.0)   | (62.5, 200.0)
  30  | (71.0, 205.0)   | (98.0, 200.0)
  31  | (106.5, 205.0)  | (133.5, 200.0)
  32  | (142.0, 205.0)  | (169.0, 200.0)
  33  | (177.5, 205.0)  | (204.5, 200.0)
  34  | (213.0, 205.0)  | (240.0, 200.0)
Starting heater checks for extruder
Starting heater checks for heater_bed
Stats 793377.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2842 bytes_read=6086 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=120016588 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.21 cputime=1.854 memavail=7295012 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.9 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 548342886848
webhooks: registering remote method 'reboot_machine' for connection id: 548342886848
webhooks: registering remote method 'pause_job_queue' for connection id: 548342886848
webhooks: registering remote method 'start_job_queue' for connection id: 548342886848
webhooks: registering remote method 'timelapse_newframe' for connection id: 548342886848
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 548342886848
webhooks: registering remote method 'timelapse_render' for connection id: 548342886848
webhooks: registering remote method 'publish_mqtt_topic' for connection id: 548342886848
webhooks: registering remote method 'notify' for connection id: 548342886848
webhooks: registering remote method 'set_device_power' for connection id: 548342886848
Stats 793378.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2848 bytes_read=6192 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119998392 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.21 cputime=1.914 memavail=7295608 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.9 pwm=0.000
Stats 793379.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2854 bytes_read=6298 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994773 heater_bed: target=0 temp=35.3 pwm=0.000  sysload=0.21 cputime=1.931 memavail=7294852 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.9 pwm=0.000
Stats 793380.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2860 bytes_read=6434 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994257 heater_bed: target=0 temp=35.3 pwm=0.000  sysload=0.19 cputime=1.948 memavail=7298632 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.9 pwm=0.000
Stats 793381.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2866 bytes_read=6555 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=120000907 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.19 cputime=1.973 memavail=7298632 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.9 pwm=0.000
Stats 793382.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2872 bytes_read=6661 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119997698 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.19 cputime=1.991 memavail=7298632 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.9 pwm=0.000
Stats 793383.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2878 bytes_read=6797 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119995796 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.19 cputime=2.008 memavail=7298128 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.9 pwm=0.000
Stats 793384.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2884 bytes_read=6903 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994701 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.19 cputime=2.034 memavail=7298128 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.9 pwm=0.000
Stats 793385.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2890 bytes_read=7009 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994190 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.26 cputime=2.056 memavail=7298128 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.8 pwm=0.000
Stats 793386.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2896 bytes_read=7159 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119997841 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.26 cputime=2.084 memavail=7298884 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.8 pwm=0.000
Stats 793387.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2902 bytes_read=7265 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119996501 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.26 cputime=2.104 memavail=7298888 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.8 pwm=0.000
Stats 793388.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2908 bytes_read=7371 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119995568 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.26 cputime=2.128 memavail=7298144 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.8 pwm=0.000
Stats 793389.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2914 bytes_read=7507 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994974 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.26 cputime=2.142 memavail=7298144 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.8 pwm=0.000
Stats 793390.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2920 bytes_read=7613 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994533 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.32 cputime=2.161 memavail=7298144 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.8 pwm=0.000
Stats 793391.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2926 bytes_read=7733 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994204 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.32 cputime=2.174 memavail=7298144 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.8 pwm=0.000
Stats 793392.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2932 bytes_read=7869 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993949 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.32 cputime=2.187 memavail=7298144 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.8 pwm=0.000
Stats 793393.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2938 bytes_read=7975 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993797 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.32 cputime=2.207 memavail=7298144 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.7 pwm=0.000
Stats 793394.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2944 bytes_read=8081 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993958 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.32 cputime=2.223 memavail=7298144 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.7 pwm=0.000
Stats 793395.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2950 bytes_read=8217 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993777 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.37 cputime=2.244 memavail=7298144 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.8 pwm=0.000
Stats 793396.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2956 bytes_read=8337 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993630 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.37 cputime=2.261 memavail=7297892 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.8 pwm=0.000
Stats 793397.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2962 bytes_read=8443 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993533 heater_bed: target=0 temp=35.1 pwm=0.000  sysload=0.37 cputime=2.274 memavail=7297192 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.7 pwm=0.000
Stats 793398.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2968 bytes_read=8579 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993446 heater_bed: target=0 temp=35.1 pwm=0.000  sysload=0.37 cputime=2.307 memavail=7297196 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.7 pwm=0.000
Stats 793399.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2974 bytes_read=8685 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993370 heater_bed: target=0 temp=35.1 pwm=0.000  sysload=0.37 cputime=2.331 memavail=7297196 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.7 pwm=0.000
Stats 793400.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2980 bytes_read=8806 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993351 heater_bed: target=0 temp=35.1 pwm=0.000  sysload=0.42 cputime=2.356 memavail=7296972 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.7 pwm=0.000
Stats 793401.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2986 bytes_read=8941 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993294 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.42 cputime=2.376 memavail=7296972 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.7 pwm=0.000
Stats 793402.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2992 bytes_read=9047 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993254 heater_bed: target=0 temp=35.1 pwm=0.000  sysload=0.42 cputime=2.395 memavail=7296972 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.7 pwm=0.000
Stats 793403.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2998 bytes_read=9168 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993260 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.42 cputime=2.420 memavail=7296744 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.7 pwm=0.000
Stats 793404.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3004 bytes_read=9289 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993245 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.42 cputime=2.443 memavail=7296528 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.6 pwm=0.000
Stats 793405.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3010 bytes_read=9395 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993200 heater_bed: target=0 temp=35.2 pwm=0.000  sysload=0.39 cputime=2.466 memavail=7298832 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.7 pwm=0.000
Stats 793406.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3016 bytes_read=9523 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993167 heater_bed: target=0 temp=35.1 pwm=0.000  sysload=0.39 cputime=2.485 memavail=7299204 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.6 pwm=0.000
TMC 'stepper_z' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z1' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z' reports GSTAT:      00000000
TMC 'stepper_z1' reports GSTAT:      00000000
Stats 793407.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4224 bytes_read=10560 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993138 heater_bed: target=0 temp=35.1 pwm=0.000  sysload=0.39 cputime=2.615 memavail=7297776 print_time=37.356 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.6 pwm=0.000
TMC 'stepper_x' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_x' reports GSTAT:      00000000
TMC 'stepper_y' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 793408.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6312 bytes_read=12292 bytes_retransmit=9 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=26 freq=119993130 heater_bed: target=0 temp=35.1 pwm=0.000  sysload=0.39 cputime=2.815 memavail=7298452 print_time=39.031 buffer_time=1.145 print_stall=0 extruder: target=0 temp=32.6 pwm=0.000
Stats 793409.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6481 bytes_read=12597 bytes_retransmit=9 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993143 heater_bed: target=0 temp=35.1 pwm=0.000  sysload=0.39 cputime=2.859 memavail=7300444 print_time=39.031 buffer_time=0.143 print_stall=0 extruder: target=0 temp=32.6 pwm=0.000
Stats 793410.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6780 bytes_read=13078 bytes_retransmit=9 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993144 heater_bed: target=0 temp=35.0 pwm=0.000  sysload=0.36 cputime=2.920 memavail=7298876 print_time=40.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.7 pwm=0.000
Stats 793411.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=7108 bytes_read=13413 bytes_retransmit=9 bytes_invalid=0 send_seq=479 receive_seq=479 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993143 heater_bed: target=0 temp=35.0 pwm=0.000  sysload=0.36 cputime=2.971 memavail=7299648 print_time=41.074 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.6 pwm=0.000
Stats 793412.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=7725 bytes_read=13958 bytes_retransmit=9 bytes_invalid=0 send_seq=508 receive_seq=508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993294 heater_bed: target=0 temp=35.0 pwm=0.000  sysload=0.36 cputime=3.051 memavail=7298052 print_time=42.074 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.7 pwm=0.000
Stats 793413.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=8333 bytes_read=14503 bytes_retransmit=9 bytes_invalid=0 send_seq=537 receive_seq=537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993271 heater_bed: target=0 temp=34.9 pwm=0.000  sysload=0.36 cputime=3.122 memavail=7299184 print_time=43.074 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.6 pwm=0.000
Stats 793414.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=8941 bytes_read=15033 bytes_retransmit=9 bytes_invalid=0 send_seq=566 receive_seq=566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993249 heater_bed: target=0 temp=34.9 pwm=0.000  sysload=0.36 cputime=3.186 memavail=7300668 print_time=44.074 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.7 pwm=0.000
Stats 793415.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=9550 bytes_read=15589 bytes_retransmit=9 bytes_invalid=0 send_seq=595 receive_seq=595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993230 heater_bed: target=0 temp=34.8 pwm=0.000  sysload=0.33 cputime=3.263 memavail=7298824 print_time=45.074 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.6 pwm=0.000
Stats 793416.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=10163 bytes_read=16154 bytes_retransmit=9 bytes_invalid=0 send_seq=625 receive_seq=625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993205 heater_bed: target=0 temp=34.8 pwm=0.000  sysload=0.33 cputime=3.327 memavail=7297932 print_time=46.074 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793417.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=10771 bytes_read=16684 bytes_retransmit=9 bytes_invalid=0 send_seq=654 receive_seq=654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993194 heater_bed: target=0 temp=34.8 pwm=0.000  sysload=0.33 cputime=3.396 memavail=7298688 print_time=47.074 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793418.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=11384 bytes_read=17234 bytes_retransmit=9 bytes_invalid=0 send_seq=684 receive_seq=684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993182 heater_bed: target=0 temp=34.7 pwm=0.000  sysload=0.33 cputime=3.464 memavail=7301008 print_time=48.074 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.6 pwm=0.000
Stats 793419.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=11992 bytes_read=17779 bytes_retransmit=9 bytes_invalid=0 send_seq=713 receive_seq=713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993181 heater_bed: target=0 temp=34.8 pwm=0.000  sysload=0.33 cputime=3.523 memavail=7299416 print_time=49.074 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793420.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=12610 bytes_read=18319 bytes_retransmit=9 bytes_invalid=0 send_seq=744 receive_seq=744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993387 heater_bed: target=0 temp=34.7 pwm=0.000  sysload=0.46 cputime=3.593 memavail=7300676 print_time=50.074 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793421.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=13551 bytes_read=18896 bytes_retransmit=9 bytes_invalid=0 send_seq=778 receive_seq=778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993359 heater_bed: target=0 temp=34.8 pwm=0.000  sysload=0.46 cputime=3.658 memavail=7299516 print_time=51.073 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793422.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=14066 bytes_read=19475 bytes_retransmit=9 bytes_invalid=0 send_seq=807 receive_seq=807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993326 heater_bed: target=0 temp=34.8 pwm=0.000  sysload=0.46 cputime=3.723 memavail=7301564 print_time=51.614 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793423.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=14622 bytes_read=19948 bytes_retransmit=9 bytes_invalid=0 send_seq=829 receive_seq=829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993311 heater_bed: target=0 temp=34.7 pwm=0.000  sysload=0.46 cputime=3.778 memavail=7302708 print_time=53.051 buffer_time=0.155 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793424.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=14740 bytes_read=20253 bytes_retransmit=9 bytes_invalid=0 send_seq=838 receive_seq=838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993301 heater_bed: target=0 temp=34.7 pwm=0.000  sysload=0.46 cputime=3.827 memavail=7300916 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793425.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=14858 bytes_read=20558 bytes_retransmit=9 bytes_invalid=0 send_seq=847 receive_seq=847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993282 heater_bed: target=0 temp=34.7 pwm=0.000  sysload=0.43 cputime=3.872 memavail=7300024 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793426.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=14976 bytes_read=20863 bytes_retransmit=9 bytes_invalid=0 send_seq=856 receive_seq=856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993265 heater_bed: target=0 temp=34.7 pwm=0.000  sysload=0.43 cputime=3.919 memavail=7301736 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793427.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=15094 bytes_read=21168 bytes_retransmit=9 bytes_invalid=0 send_seq=865 receive_seq=865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993245 heater_bed: target=0 temp=34.6 pwm=0.000  sysload=0.43 cputime=3.964 memavail=7298668 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793428.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=15212 bytes_read=21473 bytes_retransmit=9 bytes_invalid=0 send_seq=874 receive_seq=874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993227 heater_bed: target=0 temp=34.7 pwm=0.000  sysload=0.43 cputime=4.010 memavail=7297756 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793429.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=15330 bytes_read=21763 bytes_retransmit=9 bytes_invalid=0 send_seq=883 receive_seq=883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993725 heater_bed: target=0 temp=34.6 pwm=0.000  sysload=0.43 cputime=4.048 memavail=7300316 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793430.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=15448 bytes_read=22068 bytes_retransmit=9 bytes_invalid=0 send_seq=892 receive_seq=892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993666 heater_bed: target=0 temp=34.6 pwm=0.000  sysload=0.39 cputime=4.080 memavail=7301392 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793431.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=15566 bytes_read=22388 bytes_retransmit=9 bytes_invalid=0 send_seq=901 receive_seq=901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993611 heater_bed: target=0 temp=34.7 pwm=0.000  sysload=0.39 cputime=4.107 memavail=7302332 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793432.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=15684 bytes_read=22678 bytes_retransmit=9 bytes_invalid=0 send_seq=910 receive_seq=910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993562 heater_bed: target=0 temp=34.7 pwm=0.000  sysload=0.39 cputime=4.140 memavail=7304036 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793433.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=15802 bytes_read=22983 bytes_retransmit=9 bytes_invalid=0 send_seq=919 receive_seq=919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993589 heater_bed: target=0 temp=34.6 pwm=0.000  sysload=0.39 cputime=4.176 memavail=7301052 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793434.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=15920 bytes_read=23288 bytes_retransmit=9 bytes_invalid=0 send_seq=928 receive_seq=928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993547 heater_bed: target=0 temp=34.6 pwm=0.000  sysload=0.39 cputime=4.213 memavail=7301988 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793435.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16038 bytes_read=23578 bytes_retransmit=9 bytes_invalid=0 send_seq=937 receive_seq=937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993509 heater_bed: target=0 temp=34.6 pwm=0.000  sysload=0.44 cputime=4.252 memavail=7300396 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793436.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16156 bytes_read=23898 bytes_retransmit=9 bytes_invalid=0 send_seq=946 receive_seq=946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993479 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.44 cputime=4.285 memavail=7299472 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 793437.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16274 bytes_read=24203 bytes_retransmit=9 bytes_invalid=0 send_seq=955 receive_seq=955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993449 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.44 cputime=4.320 memavail=7301252 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793438.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16392 bytes_read=24493 bytes_retransmit=9 bytes_invalid=0 send_seq=964 receive_seq=964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993420 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.44 cputime=4.350 memavail=7300132 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793439.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16510 bytes_read=24798 bytes_retransmit=9 bytes_invalid=0 send_seq=973 receive_seq=973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993391 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.44 cputime=4.392 memavail=7301288 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793440.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16628 bytes_read=25103 bytes_retransmit=9 bytes_invalid=0 send_seq=982 receive_seq=982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993367 heater_bed: target=0 temp=34.6 pwm=0.000  sysload=0.40 cputime=4.432 memavail=7299272 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793441.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16746 bytes_read=25407 bytes_retransmit=9 bytes_invalid=0 send_seq=991 receive_seq=991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993346 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.40 cputime=4.470 memavail=7300432 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793442.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16864 bytes_read=25704 bytes_retransmit=9 bytes_invalid=0 send_seq=1000 receive_seq=1000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993395 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.40 cputime=4.509 memavail=7301856 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793443.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16982 bytes_read=26001 bytes_retransmit=9 bytes_invalid=0 send_seq=1009 receive_seq=1009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993382 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.40 cputime=4.551 memavail=7298800 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793444.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17100 bytes_read=26291 bytes_retransmit=9 bytes_invalid=0 send_seq=1018 receive_seq=1018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993359 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.40 cputime=4.593 memavail=7300516 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793445.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17218 bytes_read=26596 bytes_retransmit=9 bytes_invalid=0 send_seq=1027 receive_seq=1027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993342 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.37 cputime=4.634 memavail=7298724 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793446.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17336 bytes_read=26916 bytes_retransmit=9 bytes_invalid=0 send_seq=1036 receive_seq=1036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993323 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.37 cputime=4.675 memavail=7297828 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793447.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17454 bytes_read=27206 bytes_retransmit=9 bytes_invalid=0 send_seq=1045 receive_seq=1045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993304 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.37 cputime=4.724 memavail=7298420 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793448.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17572 bytes_read=27511 bytes_retransmit=9 bytes_invalid=0 send_seq=1054 receive_seq=1054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993285 heater_bed: target=0 temp=34.5 pwm=0.000  sysload=0.37 cputime=4.770 memavail=7301840 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793449.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17690 bytes_read=27816 bytes_retransmit=9 bytes_invalid=0 send_seq=1063 receive_seq=1063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993269 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.37 cputime=4.817 memavail=7300496 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793450.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17808 bytes_read=28106 bytes_retransmit=9 bytes_invalid=0 send_seq=1072 receive_seq=1072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993264 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.34 cputime=4.857 memavail=7299860 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793451.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17926 bytes_read=28426 bytes_retransmit=9 bytes_invalid=0 send_seq=1081 receive_seq=1081 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993370 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.34 cputime=4.905 memavail=7301108 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793452.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18044 bytes_read=28731 bytes_retransmit=9 bytes_invalid=0 send_seq=1090 receive_seq=1090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993350 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.34 cputime=4.946 memavail=7302672 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793453.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18162 bytes_read=29021 bytes_retransmit=9 bytes_invalid=0 send_seq=1099 receive_seq=1099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993335 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.34 cputime=4.994 memavail=7301300 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793454.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18280 bytes_read=29326 bytes_retransmit=9 bytes_invalid=0 send_seq=1108 receive_seq=1108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993316 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.34 cputime=5.041 memavail=7299236 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793455.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18398 bytes_read=29631 bytes_retransmit=9 bytes_invalid=0 send_seq=1117 receive_seq=1117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993360 heater_bed: target=0 temp=34.3 pwm=0.000  sysload=0.31 cputime=5.085 memavail=7300880 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793456.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18516 bytes_read=29936 bytes_retransmit=9 bytes_invalid=0 send_seq=1126 receive_seq=1126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993341 heater_bed: target=0 temp=34.3 pwm=0.000  sysload=0.31 cputime=5.127 memavail=7303148 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.4 pwm=0.000
Stats 793457.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18634 bytes_read=30241 bytes_retransmit=9 bytes_invalid=0 send_seq=1135 receive_seq=1135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993323 heater_bed: target=0 temp=34.3 pwm=0.000  sysload=0.31 cputime=5.180 memavail=7300548 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793458.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18752 bytes_read=30546 bytes_retransmit=9 bytes_invalid=0 send_seq=1144 receive_seq=1144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993307 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.31 cputime=5.238 memavail=7298956 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793459.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18870 bytes_read=30836 bytes_retransmit=9 bytes_invalid=0 send_seq=1153 receive_seq=1153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993300 heater_bed: target=0 temp=34.3 pwm=0.000  sysload=0.31 cputime=5.290 memavail=7298732 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793460.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18988 bytes_read=31141 bytes_retransmit=9 bytes_invalid=0 send_seq=1162 receive_seq=1162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993357 heater_bed: target=0 temp=34.4 pwm=0.000  sysload=0.29 cputime=5.353 memavail=7301224 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793461.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19106 bytes_read=31461 bytes_retransmit=9 bytes_invalid=0 send_seq=1171 receive_seq=1171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993337 heater_bed: target=0 temp=34.3 pwm=0.000  sysload=0.29 cputime=5.403 memavail=7299360 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793462.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19224 bytes_read=31751 bytes_retransmit=9 bytes_invalid=0 send_seq=1180 receive_seq=1180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993318 heater_bed: target=0 temp=34.3 pwm=0.000  sysload=0.29 cputime=5.454 memavail=7300944 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793463.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19342 bytes_read=32056 bytes_retransmit=9 bytes_invalid=0 send_seq=1189 receive_seq=1189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993303 heater_bed: target=0 temp=34.3 pwm=0.000  sysload=0.29 cputime=5.502 memavail=7299096 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793464.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19460 bytes_read=32361 bytes_retransmit=9 bytes_invalid=0 send_seq=1198 receive_seq=1198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993290 heater_bed: target=0 temp=34.3 pwm=0.000  sysload=0.29 cputime=5.553 memavail=7297976 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793465.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19578 bytes_read=32651 bytes_retransmit=9 bytes_invalid=0 send_seq=1207 receive_seq=1207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993276 heater_bed: target=0 temp=34.3 pwm=0.000  sysload=0.27 cputime=5.598 memavail=7300708 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793466.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19696 bytes_read=32971 bytes_retransmit=9 bytes_invalid=0 send_seq=1216 receive_seq=1216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993261 heater_bed: target=0 temp=34.2 pwm=0.000  sysload=0.27 cputime=5.646 memavail=7298908 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793467.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19814 bytes_read=33276 bytes_retransmit=9 bytes_invalid=0 send_seq=1225 receive_seq=1225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993249 heater_bed: target=0 temp=34.3 pwm=0.000  sysload=0.27 cputime=5.693 memavail=7301232 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793468.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19932 bytes_read=33566 bytes_retransmit=9 bytes_invalid=0 send_seq=1234 receive_seq=1234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993240 heater_bed: target=0 temp=34.2 pwm=0.000  sysload=0.27 cputime=5.729 memavail=7302800 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793469.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=20050 bytes_read=33871 bytes_retransmit=9 bytes_invalid=0 send_seq=1243 receive_seq=1243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993281 heater_bed: target=0 temp=34.1 pwm=0.000  sysload=0.27 cputime=5.771 memavail=7301008 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793470.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=20168 bytes_read=34176 bytes_retransmit=9 bytes_invalid=0 send_seq=1252 receive_seq=1252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993270 heater_bed: target=0 temp=34.2 pwm=0.000  sysload=0.24 cputime=5.814 memavail=7299440 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793471.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=20286 bytes_read=34481 bytes_retransmit=9 bytes_invalid=0 send_seq=1261 receive_seq=1261 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993257 heater_bed: target=0 temp=34.2 pwm=0.000  sysload=0.24 cputime=5.855 memavail=7298196 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793472.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=20404 bytes_read=34786 bytes_retransmit=9 bytes_invalid=0 send_seq=1270 receive_seq=1270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993248 heater_bed: target=0 temp=34.2 pwm=0.000  sysload=0.24 cputime=5.897 memavail=7292308 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793473.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=20522 bytes_read=35091 bytes_retransmit=9 bytes_invalid=0 send_seq=1279 receive_seq=1279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993237 heater_bed: target=0 temp=34.1 pwm=0.000  sysload=0.24 cputime=5.957 memavail=7301408 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793474.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=20640 bytes_read=35381 bytes_retransmit=9 bytes_invalid=0 send_seq=1288 receive_seq=1288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993371 heater_bed: target=0 temp=34.1 pwm=0.000  sysload=0.24 cputime=6.003 memavail=7301888 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793475.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=20758 bytes_read=35686 bytes_retransmit=9 bytes_invalid=0 send_seq=1297 receive_seq=1297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993348 heater_bed: target=0 temp=34.2 pwm=0.000  sysload=0.22 cputime=6.057 memavail=7300180 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793476.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=20882 bytes_read=36022 bytes_retransmit=9 bytes_invalid=0 send_seq=1307 receive_seq=1307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993308 heater_bed: target=0 temp=34.2 pwm=0.000  sysload=0.22 cputime=6.113 memavail=7301180 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793477.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=21000 bytes_read=36309 bytes_retransmit=9 bytes_invalid=0 send_seq=1316 receive_seq=1316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993337 heater_bed: target=0 temp=34.1 pwm=0.000  sysload=0.22 cputime=6.164 memavail=7301440 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793478.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=21118 bytes_read=36606 bytes_retransmit=9 bytes_invalid=0 send_seq=1325 receive_seq=1325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993320 heater_bed: target=0 temp=34.2 pwm=0.000  sysload=0.22 cputime=6.211 memavail=7298932 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793479.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=21236 bytes_read=36905 bytes_retransmit=9 bytes_invalid=0 send_seq=1334 receive_seq=1334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993304 heater_bed: target=0 temp=34.1 pwm=0.000  sysload=0.22 cputime=6.251 memavail=7300608 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.3 pwm=0.000
Stats 793480.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=21354 bytes_read=37195 bytes_retransmit=9 bytes_invalid=0 send_seq=1343 receive_seq=1343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993290 heater_bed: target=0 temp=34.1 pwm=0.000  sysload=0.37 cputime=6.303 memavail=7301632 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.1 pwm=0.000
Stats 793481.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=21472 bytes_read=37515 bytes_retransmit=9 bytes_invalid=0 send_seq=1352 receive_seq=1352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993284 heater_bed: target=0 temp=34.1 pwm=0.000  sysload=0.37 cputime=6.356 memavail=7300064 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793482.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=21590 bytes_read=37820 bytes_retransmit=9 bytes_invalid=0 send_seq=1361 receive_seq=1361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993271 heater_bed: target=0 temp=34.1 pwm=0.000  sysload=0.37 cputime=6.401 memavail=7298452 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793483.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=21708 bytes_read=38110 bytes_retransmit=9 bytes_invalid=0 send_seq=1370 receive_seq=1370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993257 heater_bed: target=0 temp=34.0 pwm=0.000  sysload=0.37 cputime=6.442 memavail=7299444 print_time=53.051 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 793536.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27915 bytes_read=54035 bytes_retransmit=9 bytes_invalid=0 send_seq=1842 receive_seq=1842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993424 heater_bed: target=0 temp=33.6 pwm=0.000  sysload=0.44 cputime=8.687 memavail=7294460 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.9 pwm=0.000
Stats 793537.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27921 bytes_read=54156 bytes_retransmit=9 bytes_invalid=0 send_seq=1843 receive_seq=1843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993409 heater_bed: target=0 temp=33.6 pwm=0.000  sysload=0.44 cputime=8.714 memavail=7297420 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.9 pwm=0.000
Stats 793538.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27933 bytes_read=54293 bytes_retransmit=9 bytes_invalid=0 send_seq=1845 receive_seq=1845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993362 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=0.44 cputime=8.733 memavail=7295940 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793539.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27939 bytes_read=54399 bytes_retransmit=9 bytes_invalid=0 send_seq=1846 receive_seq=1846 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993472 heater_bed: target=0 temp=33.6 pwm=0.000  sysload=0.44 cputime=8.770 memavail=7298516 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.9 pwm=0.000
Stats 793540.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=27945 bytes_read=54520 bytes_retransmit=9 bytes_invalid=0 send_seq=1847 receive_seq=1847 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993446 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=0.56 cputime=8.799 memavail=7298376 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.9 pwm=0.000
Stats 793541.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=27951 bytes_read=54655 bytes_retransmit=9 bytes_invalid=0 send_seq=1848 receive_seq=1848 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993421 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=0.56 cputime=8.822 memavail=7296812 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.9 pwm=0.000
Stats 793542.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=27957 bytes_read=54761 bytes_retransmit=9 bytes_invalid=0 send_seq=1849 receive_seq=1849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993400 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=0.56 cputime=8.843 memavail=7298100 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793543.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=27963 bytes_read=54882 bytes_retransmit=9 bytes_invalid=0 send_seq=1850 receive_seq=1850 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993435 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=0.56 cputime=8.867 memavail=7298320 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793544.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=27969 bytes_read=55003 bytes_retransmit=9 bytes_invalid=0 send_seq=1851 receive_seq=1851 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993410 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=0.56 cputime=8.889 memavail=7300420 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.9 pwm=0.000
Stats 793545.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=27975 bytes_read=55109 bytes_retransmit=9 bytes_invalid=0 send_seq=1852 receive_seq=1852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993393 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=0.60 cputime=8.917 memavail=7299748 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793546.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=27981 bytes_read=55244 bytes_retransmit=9 bytes_invalid=0 send_seq=1853 receive_seq=1853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993372 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=0.60 cputime=8.941 memavail=7299688 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793547.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=27987 bytes_read=55365 bytes_retransmit=9 bytes_invalid=0 send_seq=1854 receive_seq=1854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993362 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=0.60 cputime=8.961 memavail=7299204 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793548.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=27993 bytes_read=55471 bytes_retransmit=9 bytes_invalid=0 send_seq=1855 receive_seq=1855 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993402 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=0.60 cputime=8.988 memavail=7296832 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793549.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=27999 bytes_read=55584 bytes_retransmit=9 bytes_invalid=0 send_seq=1856 receive_seq=1856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993380 heater_bed: target=0 temp=33.4 pwm=0.000  sysload=0.60 cputime=9.014 memavail=7298228 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793550.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=28005 bytes_read=55697 bytes_retransmit=9 bytes_invalid=0 send_seq=1857 receive_seq=1857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993358 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=1.03 cputime=9.040 memavail=7298052 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793551.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=28011 bytes_read=55801 bytes_retransmit=9 bytes_invalid=0 send_seq=1858 receive_seq=1858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993340 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=1.03 cputime=9.062 memavail=7299324 print_time=165.887 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793552.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=29079 bytes_read=56655 bytes_retransmit=9 bytes_invalid=0 send_seq=1904 receive_seq=1904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993318 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=1.03 cputime=9.169 memavail=7296788 print_time=182.640 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793553.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=29721 bytes_read=57354 bytes_retransmit=9 bytes_invalid=0 send_seq=1941 receive_seq=1941 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993364 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=1.03 cputime=9.256 memavail=7297328 print_time=183.190 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793554.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=30787 bytes_read=58511 bytes_retransmit=9 bytes_invalid=0 send_seq=2008 receive_seq=2008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993339 heater_bed: target=0 temp=33.5 pwm=0.000  sysload=1.03 cputime=9.386 memavail=7297820 print_time=184.152 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793555.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=31695 bytes_read=59138 bytes_retransmit=9 bytes_invalid=0 send_seq=2045 receive_seq=2045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993316 heater_bed: target=0 temp=33.4 pwm=0.000  sysload=1.19 cputime=9.470 memavail=7303072 print_time=186.347 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793556.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=31821 bytes_read=59443 bytes_retransmit=9 bytes_invalid=0 send_seq=2054 receive_seq=2054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=119993295 heater_bed: target=0 temp=33.4 pwm=0.000  sysload=1.19 cputime=9.521 memavail=7300600 print_time=186.347 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.7 pwm=0.000
Stats 793557.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=32514 bytes_read=59951 bytes_retransmit=9 bytes_invalid=0 send_seq=2084 receive_seq=2084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993354 heater_bed: target=0 temp=33.6 pwm=0.000  sysload=1.19 cputime=9.595 memavail=7302104 print_time=187.197 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793558.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=33467 bytes_read=60518 bytes_retransmit=9 bytes_invalid=0 send_seq=2119 receive_seq=2119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993335 heater_bed: target=0 temp=33.4 pwm=0.000  sysload=1.19 cputime=9.676 memavail=7300240 print_time=188.197 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793559.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=34016 bytes_read=61121 bytes_retransmit=9 bytes_invalid=0 send_seq=2150 receive_seq=2150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993314 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.19 cputime=9.751 memavail=7300984 print_time=188.846 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.8 pwm=0.000
Stats 793560.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=34585 bytes_read=61599 bytes_retransmit=9 bytes_invalid=0 send_seq=2173 receive_seq=2173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993297 heater_bed: target=0 temp=33.4 pwm=0.000  sysload=1.17 cputime=9.812 memavail=7302084 print_time=190.280 buffer_time=0.285 print_stall=0 extruder: target=0 temp=31.7 pwm=0.000
Stats 793561.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=34703 bytes_read=61904 bytes_retransmit=9 bytes_invalid=0 send_seq=2182 receive_seq=2182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993315 heater_bed: target=0 temp=33.4 pwm=0.000  sysload=1.17 cputime=9.861 memavail=7300472 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.7 pwm=0.000
Stats 793562.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=34821 bytes_read=62224 bytes_retransmit=9 bytes_invalid=0 send_seq=2191 receive_seq=2191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993298 heater_bed: target=0 temp=33.4 pwm=0.000  sysload=1.17 cputime=9.903 memavail=7299112 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.7 pwm=0.000
Stats 793563.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=34939 bytes_read=62514 bytes_retransmit=9 bytes_invalid=0 send_seq=2200 receive_seq=2200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993281 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.17 cputime=9.951 memavail=7300300 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.7 pwm=0.000
Stats 793564.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=35057 bytes_read=62819 bytes_retransmit=9 bytes_invalid=0 send_seq=2209 receive_seq=2209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993288 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.17 cputime=10.003 memavail=7298832 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793565.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=35175 bytes_read=63124 bytes_retransmit=9 bytes_invalid=0 send_seq=2218 receive_seq=2218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993278 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.24 cputime=10.047 memavail=7300508 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.7 pwm=0.000
Stats 793566.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=35293 bytes_read=63414 bytes_retransmit=9 bytes_invalid=0 send_seq=2227 receive_seq=2227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993310 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.24 cputime=10.095 memavail=7301984 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.7 pwm=0.000
Stats 793567.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=35411 bytes_read=63734 bytes_retransmit=9 bytes_invalid=0 send_seq=2236 receive_seq=2236 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993295 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.24 cputime=10.148 memavail=7300864 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793568.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=35529 bytes_read=64039 bytes_retransmit=9 bytes_invalid=0 send_seq=2245 receive_seq=2245 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993277 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.24 cputime=10.203 memavail=7299216 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.7 pwm=0.000
Stats 793569.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=35647 bytes_read=64329 bytes_retransmit=9 bytes_invalid=0 send_seq=2254 receive_seq=2254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993261 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.24 cputime=10.255 memavail=7301340 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793570.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=35765 bytes_read=64634 bytes_retransmit=9 bytes_invalid=0 send_seq=2263 receive_seq=2263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993247 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.22 cputime=10.309 memavail=7299996 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.7 pwm=0.000
Stats 793571.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=35883 bytes_read=64939 bytes_retransmit=9 bytes_invalid=0 send_seq=2272 receive_seq=2272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993237 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=1.22 cputime=10.355 memavail=7301108 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793572.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36001 bytes_read=65244 bytes_retransmit=9 bytes_invalid=0 send_seq=2281 receive_seq=2281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993223 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.22 cputime=10.402 memavail=7299524 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793573.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36119 bytes_read=65549 bytes_retransmit=9 bytes_invalid=0 send_seq=2290 receive_seq=2290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993209 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.22 cputime=10.451 memavail=7298852 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.7 pwm=0.000
Stats 793574.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36237 bytes_read=65854 bytes_retransmit=9 bytes_invalid=0 send_seq=2299 receive_seq=2299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993199 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=1.22 cputime=10.493 memavail=7300708 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793575.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36355 bytes_read=66144 bytes_retransmit=9 bytes_invalid=0 send_seq=2308 receive_seq=2308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993220 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=1.12 cputime=10.533 memavail=7299140 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793576.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36473 bytes_read=66449 bytes_retransmit=9 bytes_invalid=0 send_seq=2317 receive_seq=2317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993208 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.12 cputime=10.574 memavail=7300812 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793577.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36591 bytes_read=66769 bytes_retransmit=9 bytes_invalid=0 send_seq=2326 receive_seq=2326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993194 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.12 cputime=10.633 memavail=7300364 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793578.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36709 bytes_read=67059 bytes_retransmit=9 bytes_invalid=0 send_seq=2335 receive_seq=2335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993182 heater_bed: target=0 temp=33.3 pwm=0.000  sysload=1.12 cputime=10.678 memavail=7301216 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793579.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36827 bytes_read=67364 bytes_retransmit=9 bytes_invalid=0 send_seq=2344 receive_seq=2344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993184 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=1.12 cputime=10.728 memavail=7299872 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793580.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36945 bytes_read=67669 bytes_retransmit=9 bytes_invalid=0 send_seq=2353 receive_seq=2353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993173 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=1.19 cputime=10.772 memavail=7300312 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793581.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=37063 bytes_read=67959 bytes_retransmit=9 bytes_invalid=0 send_seq=2362 receive_seq=2362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993164 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=1.19 cputime=10.813 memavail=7298944 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793582.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=37181 bytes_read=68279 bytes_retransmit=9 bytes_invalid=0 send_seq=2371 receive_seq=2371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993155 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=1.19 cputime=10.862 memavail=7300772 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793583.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=37299 bytes_read=68584 bytes_retransmit=9 bytes_invalid=0 send_seq=2380 receive_seq=2380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993147 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=1.19 cputime=10.906 memavail=7298980 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793584.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=37417 bytes_read=68874 bytes_retransmit=9 bytes_invalid=0 send_seq=2389 receive_seq=2389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993187 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=1.19 cputime=10.947 memavail=7301632 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 793585.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=37535 bytes_read=69170 bytes_retransmit=9 bytes_invalid=0 send_seq=2398 receive_seq=2398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993180 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=1.26 cputime=10.983 memavail=7300092 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793586.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=37653 bytes_read=69467 bytes_retransmit=9 bytes_invalid=0 send_seq=2407 receive_seq=2407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993172 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=1.26 cputime=11.030 memavail=7299168 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793587.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=37771 bytes_read=69771 bytes_retransmit=9 bytes_invalid=0 send_seq=2416 receive_seq=2416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993161 heater_bed: target=0 temp=33.2 pwm=0.000  sysload=1.26 cputime=11.074 memavail=7300712 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793588.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=37889 bytes_read=70076 bytes_retransmit=9 bytes_invalid=0 send_seq=2425 receive_seq=2425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993155 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=1.26 cputime=11.119 memavail=7299772 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793589.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=38007 bytes_read=70381 bytes_retransmit=9 bytes_invalid=0 send_seq=2434 receive_seq=2434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993212 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=1.26 cputime=11.162 memavail=7300820 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793590.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=38125 bytes_read=70671 bytes_retransmit=9 bytes_invalid=0 send_seq=2443 receive_seq=2443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993199 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=1.16 cputime=11.203 memavail=7299448 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793591.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=38243 bytes_read=70976 bytes_retransmit=9 bytes_invalid=0 send_seq=2452 receive_seq=2452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993189 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=1.16 cputime=11.251 memavail=7301952 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793592.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=38361 bytes_read=71296 bytes_retransmit=9 bytes_invalid=0 send_seq=2461 receive_seq=2461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993181 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=1.16 cputime=11.298 memavail=7298144 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793593.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=38479 bytes_read=71586 bytes_retransmit=9 bytes_invalid=0 send_seq=2470 receive_seq=2470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993169 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=1.16 cputime=11.356 memavail=7298816 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793594.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=38597 bytes_read=71891 bytes_retransmit=9 bytes_invalid=0 send_seq=2479 receive_seq=2479 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993219 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=1.16 cputime=11.397 memavail=7296828 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793595.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=38715 bytes_read=72196 bytes_retransmit=9 bytes_invalid=0 send_seq=2488 receive_seq=2488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993208 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=1.06 cputime=11.428 memavail=7304132 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793596.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=38833 bytes_read=72486 bytes_retransmit=9 bytes_invalid=0 send_seq=2497 receive_seq=2497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993193 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=1.06 cputime=11.456 memavail=7302200 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793597.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=38951 bytes_read=72806 bytes_retransmit=9 bytes_invalid=0 send_seq=2506 receive_seq=2506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993178 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=1.06 cputime=11.483 memavail=7302752 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793598.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=39069 bytes_read=73111 bytes_retransmit=9 bytes_invalid=0 send_seq=2515 receive_seq=2515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993203 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=1.06 cputime=11.519 memavail=7300404 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793599.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=39187 bytes_read=73401 bytes_retransmit=9 bytes_invalid=0 send_seq=2524 receive_seq=2524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993187 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=1.06 cputime=11.551 memavail=7302104 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793600.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=39311 bytes_read=73722 bytes_retransmit=9 bytes_invalid=0 send_seq=2534 receive_seq=2534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993170 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=0.98 cputime=11.591 memavail=7300668 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793601.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=39429 bytes_read=74027 bytes_retransmit=9 bytes_invalid=0 send_seq=2543 receive_seq=2543 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993161 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.98 cputime=11.626 memavail=7300732 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793602.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=39547 bytes_read=74332 bytes_retransmit=9 bytes_invalid=0 send_seq=2552 receive_seq=2552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993153 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.98 cputime=11.660 memavail=7302152 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793603.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=39665 bytes_read=74637 bytes_retransmit=9 bytes_invalid=0 send_seq=2561 receive_seq=2561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993146 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.98 cputime=11.702 memavail=7301320 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793604.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=39783 bytes_read=74942 bytes_retransmit=9 bytes_invalid=0 send_seq=2570 receive_seq=2570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993137 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.98 cputime=11.738 memavail=7301460 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793605.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=39901 bytes_read=75232 bytes_retransmit=9 bytes_invalid=0 send_seq=2579 receive_seq=2579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993135 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=0.90 cputime=11.770 memavail=7300788 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793606.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=40019 bytes_read=75537 bytes_retransmit=9 bytes_invalid=0 send_seq=2588 receive_seq=2588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993192 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.90 cputime=11.807 memavail=7301800 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793607.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=40137 bytes_read=75857 bytes_retransmit=9 bytes_invalid=0 send_seq=2597 receive_seq=2597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993182 heater_bed: target=0 temp=33.1 pwm=0.000  sysload=0.90 cputime=11.844 memavail=7301064 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793608.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=40255 bytes_read=76147 bytes_retransmit=9 bytes_invalid=0 send_seq=2606 receive_seq=2606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993172 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.90 cputime=11.884 memavail=7299484 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793609.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=40373 bytes_read=76452 bytes_retransmit=9 bytes_invalid=0 send_seq=2615 receive_seq=2615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993166 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.90 cputime=11.924 memavail=7301076 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793610.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=40491 bytes_read=76757 bytes_retransmit=9 bytes_invalid=0 send_seq=2624 receive_seq=2624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993177 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.83 cputime=11.960 memavail=7299928 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793611.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=40609 bytes_read=77047 bytes_retransmit=9 bytes_invalid=0 send_seq=2633 receive_seq=2633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993168 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.83 cputime=12.004 memavail=7299256 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793612.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=40727 bytes_read=77367 bytes_retransmit=9 bytes_invalid=0 send_seq=2642 receive_seq=2642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993161 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.83 cputime=12.043 memavail=7301884 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793613.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=40845 bytes_read=77672 bytes_retransmit=9 bytes_invalid=0 send_seq=2651 receive_seq=2651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993150 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.83 cputime=12.084 memavail=7299712 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793614.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=40963 bytes_read=77962 bytes_retransmit=9 bytes_invalid=0 send_seq=2660 receive_seq=2660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993139 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.83 cputime=12.138 memavail=7299720 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.5 pwm=0.000
Stats 793615.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=41081 bytes_read=78267 bytes_retransmit=9 bytes_invalid=0 send_seq=2669 receive_seq=2669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993172 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.76 cputime=12.179 memavail=7299720 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793616.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=41199 bytes_read=78572 bytes_retransmit=9 bytes_invalid=0 send_seq=2678 receive_seq=2678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993162 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.76 cputime=12.220 memavail=7299720 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793617.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=41317 bytes_read=78877 bytes_retransmit=9 bytes_invalid=0 send_seq=2687 receive_seq=2687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993152 heater_bed: target=0 temp=33.0 pwm=0.000  sysload=0.76 cputime=12.273 memavail=7297752 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793618.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=41435 bytes_read=79182 bytes_retransmit=9 bytes_invalid=0 send_seq=2696 receive_seq=2696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993147 heater_bed: target=0 temp=32.9 pwm=0.000  sysload=0.76 cputime=12.322 memavail=7297076 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 793619.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=41553 bytes_read=79487 bytes_retransmit=9 bytes_invalid=0 send_seq=2705 receive_seq=2705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993193 heater_bed: target=0 temp=32.9 pwm=0.000  sysload=0.76 cputime=12.368 memavail=7297076 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793620.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=41671 bytes_read=79775 bytes_retransmit=9 bytes_invalid=0 send_seq=2714 receive_seq=2714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993193 heater_bed: target=0 temp=32.9 pwm=0.000  sysload=0.70 cputime=12.410 memavail=7296824 print_time=190.280 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 793850.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=69537 bytes_read=149492 bytes_retransmit=9 bytes_invalid=0 send_seq=4799 receive_seq=4799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993201 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.67 cputime=22.070 memavail=7289612 print_time=481.632 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.6 pwm=0.000
Stats 793851.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=69663 bytes_read=149797 bytes_retransmit=9 bytes_invalid=0 send_seq=4808 receive_seq=4808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=119993189 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.67 cputime=22.097 memavail=7292388 print_time=481.632 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.6 pwm=0.000
Stats 793852.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=70280 bytes_read=150286 bytes_retransmit=9 bytes_invalid=0 send_seq=4837 receive_seq=4837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993213 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.67 cputime=22.147 memavail=7290596 print_time=482.382 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.6 pwm=0.000
probe at 5.000,110.000 is z=1.670000
Stats 793853.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=71336 bytes_read=150829 bytes_retransmit=9 bytes_invalid=0 send_seq=4870 receive_seq=4870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993203 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.67 cputime=22.204 memavail=7287968 print_time=483.606 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.6 pwm=0.000
Stats 793854.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=71946 bytes_read=151322 bytes_retransmit=9 bytes_invalid=0 send_seq=4897 receive_seq=4897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993191 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.67 cputime=22.260 memavail=7290392 print_time=484.406 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
probe at 215.000,110.000 is z=1.646250
Calculating bed tilt with: [[5.000000000040643, 110.0000000000091, 1.6700000000001527], [214.9999999999136, 110.0000000000091, 1.6462500000003177]]
Coordinate descent initial error: 0.01716406249990964
Coordinate descent best_err: 4.768984895637927e-11  rounds: 207
Calculated bed tilt parameters: {'x_adjust': -0.00011311748251374594, 'y_adjust': -0.0034063786216186206, 'z_adjust': 2.045265283145359}
Making the following Z adjustments:
stepper_z = -0.089229
stepper_z1 = -0.126784
Retries: 0/10 Probed points range: 0.023750 tolerance: 0.020000
Stats 793855.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=73084 bytes_read=151836 bytes_retransmit=9 bytes_invalid=0 send_seq=4930 receive_seq=4930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993184 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.61 cputime=22.338 memavail=7290144 print_time=485.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.6 pwm=0.000
Stats 793856.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=73655 bytes_read=152315 bytes_retransmit=9 bytes_invalid=0 send_seq=4957 receive_seq=4957 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993218 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.61 cputime=22.394 memavail=7291808 print_time=486.374 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
probe at 5.000,110.000 is z=1.780534
Stats 793857.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=74732 bytes_read=152878 bytes_retransmit=9 bytes_invalid=0 send_seq=4991 receive_seq=4991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993207 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.61 cputime=22.464 memavail=7290688 print_time=487.646 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.6 pwm=0.000
Stats 793858.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=75329 bytes_read=153352 bytes_retransmit=9 bytes_invalid=0 send_seq=5020 receive_seq=5020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993196 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.61 cputime=22.532 memavail=7292552 print_time=488.396 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.6 pwm=0.000
probe at 215.000,110.000 is z=1.775534
Calculating bed tilt with: [[5.000000000040615, 110.0000000000091, 1.7805337436544666], [214.99999999991357, 110.0000000000091, 1.775533743654615]]
Coordinate descent initial error: 0.0015842815665762721
Coordinate descent best_err: 9.798083844052766e-11  rounds: 205
Calculated bed tilt parameters: {'x_adjust': -2.375836985364063e-05, 'y_adjust': 0.00025259452722043693, 'z_adjust': 1.7528662542170266}
Making the following Z adjustments:
stepper_z = 0.033435
stepper_z1 = 0.025547
Retries: 1/10 Probed points range: 0.005000 tolerance: 0.020000
Stats 793859.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=76057 bytes_read=153870 bytes_retransmit=9 bytes_invalid=0 send_seq=5048 receive_seq=5048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993189 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.61 cputime=22.604 memavail=7290908 print_time=489.003 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793860.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=76273 bytes_read=154338 bytes_retransmit=9 bytes_invalid=0 send_seq=5066 receive_seq=5066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993187 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.72 cputime=22.658 memavail=7292176 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.6 pwm=0.000
Stats 793861.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=76391 bytes_read=154628 bytes_retransmit=9 bytes_invalid=0 send_seq=5075 receive_seq=5075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993244 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.72 cputime=22.695 memavail=7290368 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793862.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=76509 bytes_read=154948 bytes_retransmit=9 bytes_invalid=0 send_seq=5084 receive_seq=5084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993233 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.72 cputime=22.736 memavail=7292300 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793863.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=76627 bytes_read=155253 bytes_retransmit=9 bytes_invalid=0 send_seq=5093 receive_seq=5093 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993227 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.72 cputime=22.775 memavail=7291612 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.6 pwm=0.000
Stats 793864.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=76745 bytes_read=155543 bytes_retransmit=9 bytes_invalid=0 send_seq=5102 receive_seq=5102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993218 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.72 cputime=22.819 memavail=7291156 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793865.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=76863 bytes_read=155848 bytes_retransmit=9 bytes_invalid=0 send_seq=5111 receive_seq=5111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993209 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.67 cputime=22.854 memavail=7290236 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.6 pwm=0.000
Stats 793866.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=76981 bytes_read=156153 bytes_retransmit=9 bytes_invalid=0 send_seq=5120 receive_seq=5120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993198 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.67 cputime=22.892 memavail=7292056 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793867.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=77099 bytes_read=156458 bytes_retransmit=9 bytes_invalid=0 send_seq=5129 receive_seq=5129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993187 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.67 cputime=22.936 memavail=7290436 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793868.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=77217 bytes_read=156763 bytes_retransmit=9 bytes_invalid=0 send_seq=5138 receive_seq=5138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993178 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.67 cputime=22.978 memavail=7290436 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793869.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=77335 bytes_read=157068 bytes_retransmit=9 bytes_invalid=0 send_seq=5147 receive_seq=5147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993171 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.67 cputime=23.016 memavail=7290436 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793870.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=77453 bytes_read=157358 bytes_retransmit=9 bytes_invalid=0 send_seq=5156 receive_seq=5156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993164 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.61 cputime=23.057 memavail=7289936 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793871.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=77571 bytes_read=157655 bytes_retransmit=9 bytes_invalid=0 send_seq=5165 receive_seq=5165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993162 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.61 cputime=23.100 memavail=7289936 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793872.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=77689 bytes_read=157967 bytes_retransmit=9 bytes_invalid=0 send_seq=5174 receive_seq=5174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993156 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.61 cputime=23.143 memavail=7289936 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793873.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=77807 bytes_read=158255 bytes_retransmit=9 bytes_invalid=0 send_seq=5183 receive_seq=5183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993150 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.61 cputime=23.181 memavail=7289936 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793874.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=77925 bytes_read=158560 bytes_retransmit=9 bytes_invalid=0 send_seq=5192 receive_seq=5192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993183 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.61 cputime=23.223 memavail=7289936 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.6 pwm=0.000
Stats 793875.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=78043 bytes_read=158865 bytes_retransmit=9 bytes_invalid=0 send_seq=5201 receive_seq=5201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993179 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.56 cputime=23.265 memavail=7289936 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793876.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=78161 bytes_read=159155 bytes_retransmit=9 bytes_invalid=0 send_seq=5210 receive_seq=5210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993171 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.56 cputime=23.311 memavail=7289936 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793877.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=78279 bytes_read=159475 bytes_retransmit=9 bytes_invalid=0 send_seq=5219 receive_seq=5219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993162 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.56 cputime=23.360 memavail=7289936 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.6 pwm=0.000
Stats 793878.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=78397 bytes_read=159780 bytes_retransmit=9 bytes_invalid=0 send_seq=5228 receive_seq=5228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993157 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.56 cputime=23.410 memavail=7289936 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793879.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=78515 bytes_read=160070 bytes_retransmit=9 bytes_invalid=0 send_seq=5237 receive_seq=5237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993150 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.56 cputime=23.452 memavail=7289936 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793880.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=78633 bytes_read=160375 bytes_retransmit=9 bytes_invalid=0 send_seq=5246 receive_seq=5246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993142 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.52 cputime=23.506 memavail=7290440 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793881.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=78751 bytes_read=160680 bytes_retransmit=9 bytes_invalid=0 send_seq=5255 receive_seq=5255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993137 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.52 cputime=23.558 memavail=7290440 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793882.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=78869 bytes_read=160985 bytes_retransmit=9 bytes_invalid=0 send_seq=5264 receive_seq=5264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993139 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.52 cputime=23.612 memavail=7290448 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793883.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=78987 bytes_read=161290 bytes_retransmit=9 bytes_invalid=0 send_seq=5273 receive_seq=5273 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993197 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.52 cputime=23.679 memavail=7290448 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793884.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=79105 bytes_read=161595 bytes_retransmit=9 bytes_invalid=0 send_seq=5282 receive_seq=5282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993190 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.52 cputime=23.732 memavail=7290448 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793885.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=79223 bytes_read=161885 bytes_retransmit=9 bytes_invalid=0 send_seq=5291 receive_seq=5291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993182 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.48 cputime=23.780 memavail=7290448 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793886.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=79341 bytes_read=162190 bytes_retransmit=9 bytes_invalid=0 send_seq=5300 receive_seq=5300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993178 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.48 cputime=23.829 memavail=7290448 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793887.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=79459 bytes_read=162510 bytes_retransmit=9 bytes_invalid=0 send_seq=5309 receive_seq=5309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993171 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.48 cputime=23.877 memavail=7290448 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793888.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=79577 bytes_read=162800 bytes_retransmit=9 bytes_invalid=0 send_seq=5318 receive_seq=5318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993165 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.48 cputime=23.921 memavail=7290448 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793889.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=79695 bytes_read=163105 bytes_retransmit=9 bytes_invalid=0 send_seq=5327 receive_seq=5327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993158 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.48 cputime=23.976 memavail=7290448 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793890.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=79813 bytes_read=163410 bytes_retransmit=9 bytes_invalid=0 send_seq=5336 receive_seq=5336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993151 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.44 cputime=24.024 memavail=7290196 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793891.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=79931 bytes_read=163700 bytes_retransmit=9 bytes_invalid=0 send_seq=5345 receive_seq=5345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993144 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.44 cputime=24.070 memavail=7290200 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793892.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=80049 bytes_read=164020 bytes_retransmit=9 bytes_invalid=0 send_seq=5354 receive_seq=5354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993188 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.44 cputime=24.113 memavail=7290200 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793893.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=80167 bytes_read=164325 bytes_retransmit=9 bytes_invalid=0 send_seq=5363 receive_seq=5363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993180 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.44 cputime=24.156 memavail=7290200 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793894.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=80285 bytes_read=164615 bytes_retransmit=9 bytes_invalid=0 send_seq=5372 receive_seq=5372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993171 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.44 cputime=24.201 memavail=7289948 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793895.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=80403 bytes_read=164920 bytes_retransmit=9 bytes_invalid=0 send_seq=5381 receive_seq=5381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993163 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.56 cputime=24.248 memavail=7289948 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793896.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=80521 bytes_read=165225 bytes_retransmit=9 bytes_invalid=0 send_seq=5390 receive_seq=5390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993158 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.56 cputime=24.288 memavail=7289948 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793897.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=80639 bytes_read=165530 bytes_retransmit=9 bytes_invalid=0 send_seq=5399 receive_seq=5399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993151 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.56 cputime=24.327 memavail=7289948 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793898.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=80757 bytes_read=165835 bytes_retransmit=9 bytes_invalid=0 send_seq=5408 receive_seq=5408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993146 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.56 cputime=24.363 memavail=7289948 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793899.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=80875 bytes_read=166140 bytes_retransmit=9 bytes_invalid=0 send_seq=5417 receive_seq=5417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993139 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.56 cputime=24.402 memavail=7289948 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793900.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=80993 bytes_read=166430 bytes_retransmit=9 bytes_invalid=0 send_seq=5426 receive_seq=5426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993136 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.60 cputime=24.446 memavail=7289196 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793901.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=81111 bytes_read=166735 bytes_retransmit=9 bytes_invalid=0 send_seq=5435 receive_seq=5435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993168 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.60 cputime=24.488 memavail=7289196 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793902.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=81229 bytes_read=167055 bytes_retransmit=9 bytes_invalid=0 send_seq=5444 receive_seq=5444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993160 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.60 cputime=24.524 memavail=7289196 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793903.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=81347 bytes_read=167345 bytes_retransmit=9 bytes_invalid=0 send_seq=5453 receive_seq=5453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993153 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.60 cputime=24.560 memavail=7289196 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793904.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=81465 bytes_read=167650 bytes_retransmit=9 bytes_invalid=0 send_seq=5462 receive_seq=5462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993148 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.60 cputime=24.595 memavail=7289196 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793905.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=81583 bytes_read=167955 bytes_retransmit=9 bytes_invalid=0 send_seq=5471 receive_seq=5471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993148 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.55 cputime=24.634 memavail=7289196 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793906.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=81701 bytes_read=168244 bytes_retransmit=9 bytes_invalid=0 send_seq=5480 receive_seq=5480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993143 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.55 cputime=24.671 memavail=7289196 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793907.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=81819 bytes_read=168556 bytes_retransmit=9 bytes_invalid=0 send_seq=5489 receive_seq=5489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993134 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.55 cputime=24.708 memavail=7289196 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793908.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=81943 bytes_read=168868 bytes_retransmit=9 bytes_invalid=0 send_seq=5499 receive_seq=5499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993124 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.55 cputime=24.743 memavail=7289196 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793909.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=82061 bytes_read=169158 bytes_retransmit=9 bytes_invalid=0 send_seq=5508 receive_seq=5508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993200 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.55 cputime=24.782 memavail=7289196 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793910.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=82179 bytes_read=169463 bytes_retransmit=9 bytes_invalid=0 send_seq=5517 receive_seq=5517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993190 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.51 cputime=24.819 memavail=7288444 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 793911.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=82297 bytes_read=169768 bytes_retransmit=9 bytes_invalid=0 send_seq=5526 receive_seq=5526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993181 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.51 cputime=24.862 memavail=7288444 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793912.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=82415 bytes_read=170073 bytes_retransmit=9 bytes_invalid=0 send_seq=5535 receive_seq=5535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993175 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.51 cputime=24.898 memavail=7288444 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793913.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=82533 bytes_read=170378 bytes_retransmit=9 bytes_invalid=0 send_seq=5544 receive_seq=5544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993192 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.51 cputime=24.937 memavail=7288444 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793914.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=82651 bytes_read=170683 bytes_retransmit=9 bytes_invalid=0 send_seq=5553 receive_seq=5553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993185 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.51 cputime=24.976 memavail=7288444 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793915.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=82769 bytes_read=170973 bytes_retransmit=9 bytes_invalid=0 send_seq=5562 receive_seq=5562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993174 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.55 cputime=25.010 memavail=7288444 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793916.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=82887 bytes_read=171278 bytes_retransmit=9 bytes_invalid=0 send_seq=5571 receive_seq=5571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993165 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.55 cputime=25.051 memavail=7288444 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793917.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=83005 bytes_read=171598 bytes_retransmit=9 bytes_invalid=0 send_seq=5580 receive_seq=5580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993166 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.55 cputime=25.088 memavail=7288444 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793918.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=83123 bytes_read=171888 bytes_retransmit=9 bytes_invalid=0 send_seq=5589 receive_seq=5589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993160 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.55 cputime=25.124 memavail=7288444 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 793919.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=83241 bytes_read=172193 bytes_retransmit=9 bytes_invalid=0 send_seq=5598 receive_seq=5598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993152 heater_bed: target=0 temp=31.6 pwm=0.000  sysload=0.55 cputime=25.160 memavail=7288444 print_time=489.952 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.4 pwm=0.000
Stats 794162.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=111797 bytes_read=245391 bytes_retransmit=9 bytes_invalid=0 send_seq=7776 receive_seq=7776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993150 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.04 cputime=34.998 memavail=7286316 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794163.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=111803 bytes_read=245512 bytes_retransmit=9 bytes_invalid=0 send_seq=7777 receive_seq=7777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993143 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.04 cputime=35.019 memavail=7286316 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.8 pwm=0.000
Stats 794164.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=111809 bytes_read=245633 bytes_retransmit=9 bytes_invalid=0 send_seq=7778 receive_seq=7778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993138 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.04 cputime=35.036 memavail=7286316 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794165.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=111815 bytes_read=245754 bytes_retransmit=9 bytes_invalid=0 send_seq=7779 receive_seq=7779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993133 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.04 cputime=35.055 memavail=7286316 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794166.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=111821 bytes_read=245860 bytes_retransmit=9 bytes_invalid=0 send_seq=7780 receive_seq=7780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993127 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.04 cputime=35.078 memavail=7286316 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794167.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=111827 bytes_read=245981 bytes_retransmit=9 bytes_invalid=0 send_seq=7781 receive_seq=7781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993123 heater_bed: target=0 temp=31.0 pwm=0.000  sysload=0.04 cputime=35.101 memavail=7286316 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794168.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111833 bytes_read=246116 bytes_retransmit=9 bytes_invalid=0 send_seq=7782 receive_seq=7782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993151 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.04 cputime=35.123 memavail=7286316 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794169.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111839 bytes_read=246222 bytes_retransmit=9 bytes_invalid=0 send_seq=7783 receive_seq=7783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993145 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.04 cputime=35.143 memavail=7286316 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.8 pwm=0.000
Stats 794170.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111845 bytes_read=246343 bytes_retransmit=9 bytes_invalid=0 send_seq=7784 receive_seq=7784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993147 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.04 cputime=35.169 memavail=7286316 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794171.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111851 bytes_read=246464 bytes_retransmit=9 bytes_invalid=0 send_seq=7785 receive_seq=7785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993139 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.04 cputime=35.189 memavail=7286096 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794172.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111857 bytes_read=246570 bytes_retransmit=9 bytes_invalid=0 send_seq=7786 receive_seq=7786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993134 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.04 cputime=35.210 memavail=7286096 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794173.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111863 bytes_read=246705 bytes_retransmit=9 bytes_invalid=0 send_seq=7787 receive_seq=7787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993127 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.04 cputime=35.228 memavail=7286352 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794174.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111869 bytes_read=246826 bytes_retransmit=9 bytes_invalid=0 send_seq=7788 receive_seq=7788 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993122 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.04 cputime=35.254 memavail=7286352 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794175.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111875 bytes_read=246932 bytes_retransmit=9 bytes_invalid=0 send_seq=7789 receive_seq=7789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993117 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.04 cputime=35.282 memavail=7286352 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794176.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111881 bytes_read=247053 bytes_retransmit=9 bytes_invalid=0 send_seq=7790 receive_seq=7790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993115 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.11 cputime=35.311 memavail=7286352 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.8 pwm=0.000
Stats 794177.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111887 bytes_read=247174 bytes_retransmit=9 bytes_invalid=0 send_seq=7791 receive_seq=7791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993159 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.11 cputime=35.341 memavail=7286128 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794178.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111893 bytes_read=247294 bytes_retransmit=9 bytes_invalid=0 send_seq=7792 receive_seq=7792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993153 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.11 cputime=35.373 memavail=7286128 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.8 pwm=0.000
Stats 794179.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111899 bytes_read=247415 bytes_retransmit=9 bytes_invalid=0 send_seq=7793 receive_seq=7793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993149 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.11 cputime=35.405 memavail=7286160 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794180.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111905 bytes_read=247536 bytes_retransmit=9 bytes_invalid=0 send_seq=7794 receive_seq=7794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993141 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.11 cputime=35.425 memavail=7286160 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794181.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111911 bytes_read=247642 bytes_retransmit=9 bytes_invalid=0 send_seq=7795 receive_seq=7795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993166 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.10 cputime=35.451 memavail=7285908 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794182.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111917 bytes_read=247763 bytes_retransmit=9 bytes_invalid=0 send_seq=7796 receive_seq=7796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993159 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.10 cputime=35.478 memavail=7285908 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.8 pwm=0.000
Stats 794183.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111923 bytes_read=247898 bytes_retransmit=9 bytes_invalid=0 send_seq=7797 receive_seq=7797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993152 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.10 cputime=35.501 memavail=7285684 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794184.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111929 bytes_read=248004 bytes_retransmit=9 bytes_invalid=0 send_seq=7798 receive_seq=7798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993145 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.10 cputime=35.523 memavail=7285684 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794185.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111935 bytes_read=248125 bytes_retransmit=9 bytes_invalid=0 send_seq=7799 receive_seq=7799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993141 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.10 cputime=35.544 memavail=7285684 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794186.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111941 bytes_read=248246 bytes_retransmit=9 bytes_invalid=0 send_seq=7800 receive_seq=7800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993164 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.10 cputime=35.570 memavail=7285684 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794187.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111947 bytes_read=248352 bytes_retransmit=9 bytes_invalid=0 send_seq=7801 receive_seq=7801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993157 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.10 cputime=35.595 memavail=7285684 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794188.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111953 bytes_read=248487 bytes_retransmit=9 bytes_invalid=0 send_seq=7802 receive_seq=7802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993150 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.10 cputime=35.618 memavail=7285684 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794189.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111959 bytes_read=248608 bytes_retransmit=9 bytes_invalid=0 send_seq=7803 receive_seq=7803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993144 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.10 cputime=35.640 memavail=7285684 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794190.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111965 bytes_read=248714 bytes_retransmit=9 bytes_invalid=0 send_seq=7804 receive_seq=7804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993141 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.10 cputime=35.659 memavail=7285684 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794191.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111971 bytes_read=248835 bytes_retransmit=9 bytes_invalid=0 send_seq=7805 receive_seq=7805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993136 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.09 cputime=35.678 memavail=7285188 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794192.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111977 bytes_read=248956 bytes_retransmit=9 bytes_invalid=0 send_seq=7806 receive_seq=7806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993130 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.09 cputime=35.703 memavail=7285188 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794193.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111983 bytes_read=249076 bytes_retransmit=9 bytes_invalid=0 send_seq=7807 receive_seq=7807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993126 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.09 cputime=35.723 memavail=7285188 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794194.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111989 bytes_read=249189 bytes_retransmit=9 bytes_invalid=0 send_seq=7808 receive_seq=7808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993121 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.09 cputime=35.745 memavail=7285188 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794195.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=111995 bytes_read=249302 bytes_retransmit=9 bytes_invalid=0 send_seq=7809 receive_seq=7809 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993121 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.09 cputime=35.770 memavail=7285188 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794196.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112001 bytes_read=249406 bytes_retransmit=9 bytes_invalid=0 send_seq=7810 receive_seq=7810 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993116 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.08 cputime=35.793 memavail=7286924 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794197.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112007 bytes_read=249542 bytes_retransmit=9 bytes_invalid=0 send_seq=7811 receive_seq=7811 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993108 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.08 cputime=35.808 memavail=7286924 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794198.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112013 bytes_read=249662 bytes_retransmit=9 bytes_invalid=0 send_seq=7812 receive_seq=7812 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993102 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.08 cputime=35.823 memavail=7286924 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794199.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112019 bytes_read=249768 bytes_retransmit=9 bytes_invalid=0 send_seq=7813 receive_seq=7813 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993100 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.08 cputime=35.849 memavail=7286924 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794200.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112025 bytes_read=249904 bytes_retransmit=9 bytes_invalid=0 send_seq=7814 receive_seq=7814 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993162 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.08 cputime=35.874 memavail=7286924 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794201.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112031 bytes_read=250010 bytes_retransmit=9 bytes_invalid=0 send_seq=7815 receive_seq=7815 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993157 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.07 cputime=35.894 memavail=7287428 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794202.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112037 bytes_read=250116 bytes_retransmit=9 bytes_invalid=0 send_seq=7816 receive_seq=7816 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993157 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.07 cputime=35.916 memavail=7287428 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794203.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112043 bytes_read=250266 bytes_retransmit=9 bytes_invalid=0 send_seq=7817 receive_seq=7817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993153 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.07 cputime=35.936 memavail=7287428 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794204.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112049 bytes_read=250372 bytes_retransmit=9 bytes_invalid=0 send_seq=7818 receive_seq=7818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993148 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.07 cputime=35.952 memavail=7287432 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794205.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112055 bytes_read=250478 bytes_retransmit=9 bytes_invalid=0 send_seq=7819 receive_seq=7819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993142 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.07 cputime=35.973 memavail=7287432 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794206.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112061 bytes_read=250614 bytes_retransmit=9 bytes_invalid=0 send_seq=7820 receive_seq=7820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993137 heater_bed: target=0 temp=30.7 pwm=0.000  sysload=0.07 cputime=35.995 memavail=7287432 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794207.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112067 bytes_read=250720 bytes_retransmit=9 bytes_invalid=0 send_seq=7821 receive_seq=7821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993134 heater_bed: target=0 temp=30.9 pwm=0.000  sysload=0.07 cputime=36.016 memavail=7287432 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794208.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112073 bytes_read=250840 bytes_retransmit=9 bytes_invalid=0 send_seq=7822 receive_seq=7822 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993134 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.07 cputime=36.036 memavail=7287432 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794209.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112079 bytes_read=250976 bytes_retransmit=9 bytes_invalid=0 send_seq=7823 receive_seq=7823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993130 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.07 cputime=36.053 memavail=7287208 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794210.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112085 bytes_read=251082 bytes_retransmit=9 bytes_invalid=0 send_seq=7824 receive_seq=7824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993125 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.07 cputime=36.074 memavail=7287208 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794211.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112091 bytes_read=251188 bytes_retransmit=9 bytes_invalid=0 send_seq=7825 receive_seq=7825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993122 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.30 cputime=36.094 memavail=7286708 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794212.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112097 bytes_read=251324 bytes_retransmit=9 bytes_invalid=0 send_seq=7826 receive_seq=7826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993119 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.30 cputime=36.113 memavail=7286708 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794213.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112103 bytes_read=251430 bytes_retransmit=9 bytes_invalid=0 send_seq=7827 receive_seq=7827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993116 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.30 cputime=36.129 memavail=7286708 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794214.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112115 bytes_read=251566 bytes_retransmit=9 bytes_invalid=0 send_seq=7829 receive_seq=7829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993114 heater_bed: target=0 temp=30.7 pwm=0.000  sysload=0.30 cputime=36.154 memavail=7286708 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794215.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112121 bytes_read=251702 bytes_retransmit=9 bytes_invalid=0 send_seq=7830 receive_seq=7830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993113 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.30 cputime=36.175 memavail=7286708 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794216.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112127 bytes_read=251808 bytes_retransmit=9 bytes_invalid=0 send_seq=7831 receive_seq=7831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993152 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.28 cputime=36.196 memavail=7286708 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794217.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112133 bytes_read=251914 bytes_retransmit=9 bytes_invalid=0 send_seq=7832 receive_seq=7832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993154 heater_bed: target=0 temp=30.7 pwm=0.000  sysload=0.28 cputime=36.213 memavail=7286708 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794218.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112139 bytes_read=252050 bytes_retransmit=9 bytes_invalid=0 send_seq=7833 receive_seq=7833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993147 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.28 cputime=36.236 memavail=7286708 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794219.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112145 bytes_read=252170 bytes_retransmit=9 bytes_invalid=0 send_seq=7834 receive_seq=7834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993142 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.28 cputime=36.258 memavail=7286708 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 794220.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112151 bytes_read=252276 bytes_retransmit=9 bytes_invalid=0 send_seq=7835 receive_seq=7835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993188 heater_bed: target=0 temp=30.8 pwm=0.000  sysload=0.28 cputime=36.280 memavail=7286708 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 794221.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=112157 bytes_read=252412 bytes_retransmit=9 bytes_invalid=0 send_seq=7836 receive_seq=7836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993181 heater_bed: target=0 temp=30.7 pwm=0.000  sysload=0.34 cputime=36.300 memavail=7285876 print_time=790.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-311-g9e765dae'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sat Nov 18 18:32:12 2023 (1700361132.2 794775.1)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
webhooks client 548410237760: New connection
webhooks client 548410237760: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
Loaded MCU 'mcu' 105 commands (v0.11.0-105-g1e7057e9 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0=P0.28,P0.27 BUS_PINS_i2c1=P0.1,P0.0 BUS_PINS_i2c1a=P0.20,P0.19 BUS_PINS_i2c2=P0.11,P0.10 BUS_PINS_ssp0=P0.17,P0.18,P0.15 BUS_PINS_ssp1=P0.8,P0.9,P0.7 CLOCK_FREQ=120000000 MCU=lpc1769 PWM_MAX=255 RESERVE_PINS_USB=P0.30,P0.29,P2.9 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (0.0, 10.0)     | (27.0, 5.0)
  1   | (35.5, 10.0)    | (62.5, 5.0)
  2   | (71.0, 10.0)    | (98.0, 5.0)
  3   | (106.5, 10.0)   | (133.5, 5.0)
  4   | (142.0, 10.0)   | (169.0, 5.0)
  5   | (177.5, 10.0)   | (204.5, 5.0)
  6   | (213.0, 10.0)   | (240.0, 5.0)
  7   | (213.0, 58.8)   | (240.0, 53.8)
  8   | (177.5, 58.8)   | (204.5, 53.8)
  9   | (142.0, 58.8)   | (169.0, 53.8)
  10  | (106.5, 58.8)   | (133.5, 53.8)
  11  | (71.0, 58.8)    | (98.0, 53.8)
  12  | (35.5, 58.8)    | (62.5, 53.8)
  13  | (0.0, 58.8)     | (27.0, 53.8)
  14  | (0.0, 107.5)    | (27.0, 102.5)
  15  | (35.5, 107.5)   | (62.5, 102.5)
  16  | (71.0, 107.5)   | (98.0, 102.5)
  17  | (106.5, 107.5)  | (133.5, 102.5)
  18  | (142.0, 107.5)  | (169.0, 102.5)
  19  | (177.5, 107.5)  | (204.5, 102.5)
  20  | (213.0, 107.5)  | (240.0, 102.5)
  21  | (213.0, 156.2)  | (240.0, 151.2)
  22  | (177.5, 156.2)  | (204.5, 151.2)
  23  | (142.0, 156.2)  | (169.0, 151.2)
  24  | (106.5, 156.2)  | (133.5, 151.2)
  25  | (71.0, 156.2)   | (98.0, 151.2)
  26  | (35.5, 156.2)   | (62.5, 151.2)
  27  | (0.0, 156.2)    | (27.0, 151.2)
  28  | (0.0, 205.0)    | (27.0, 200.0)
  29  | (35.5, 205.0)   | (62.5, 200.0)
  30  | (71.0, 205.0)   | (98.0, 200.0)
  31  | (106.5, 205.0)  | (133.5, 200.0)
  32  | (142.0, 205.0)  | (169.0, 200.0)
  33  | (177.5, 205.0)  | (204.5, 200.0)
  34  | (213.0, 205.0)  | (240.0, 200.0)
Starting heater checks for extruder
Starting heater checks for heater_bed
Stats 794783.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2811 bytes_read=5961 bytes_retransmit=9 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119990349 heater_bed: target=0 temp=0.0 pwm=0.000  sysload=0.22 cputime=1.954 memavail=7292596 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 548410237760
webhooks: registering remote method 'reboot_machine' for connection id: 548410237760
webhooks: registering remote method 'pause_job_queue' for connection id: 548410237760
webhooks: registering remote method 'start_job_queue' for connection id: 548410237760
webhooks: registering remote method 'timelapse_newframe' for connection id: 548410237760
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 548410237760
webhooks: registering remote method 'timelapse_render' for connection id: 548410237760
webhooks: registering remote method 'publish_mqtt_topic' for connection id: 548410237760
webhooks: registering remote method 'notify' for connection id: 548410237760
webhooks: registering remote method 'set_device_power' for connection id: 548410237760
Stats 794784.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2825 bytes_read=6082 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992032 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.22 cputime=2.039 memavail=7292372 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 794785.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2831 bytes_read=6188 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=120004680 heater_bed: target=0 temp=29.6 pwm=0.000  sysload=0.22 cputime=2.078 memavail=7294656 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 794786.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2837 bytes_read=6309 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119998329 heater_bed: target=0 temp=29.6 pwm=0.000  sysload=0.22 cputime=2.105 memavail=7294432 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794787.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2843 bytes_read=6445 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119995568 heater_bed: target=0 temp=29.6 pwm=0.000  sysload=0.37 cputime=2.141 memavail=7294208 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 794788.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2849 bytes_read=6551 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994277 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.37 cputime=2.185 memavail=7293984 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 794789.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2855 bytes_read=6672 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119999308 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.37 cputime=2.220 memavail=7293760 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 794790.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2861 bytes_read=6793 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119997267 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.37 cputime=2.244 memavail=7293760 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794791.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2867 bytes_read=6899 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119995952 heater_bed: target=0 temp=29.6 pwm=0.000  sysload=0.37 cputime=2.265 memavail=7293536 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794792.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2873 bytes_read=7034 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119995175 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.58 cputime=2.286 memavail=7292812 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794793.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2879 bytes_read=7155 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994616 heater_bed: target=0 temp=29.6 pwm=0.000  sysload=0.58 cputime=2.318 memavail=7292588 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794794.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2885 bytes_read=7261 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994210 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.58 cputime=2.346 memavail=7292588 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 794795.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2891 bytes_read=7397 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993903 heater_bed: target=0 temp=29.6 pwm=0.000  sysload=0.58 cputime=2.375 memavail=7292364 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794796.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2897 bytes_read=7503 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993689 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.58 cputime=2.397 memavail=7292140 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794797.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2903 bytes_read=7623 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993550 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.53 cputime=2.419 memavail=7291916 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794798.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2909 bytes_read=7759 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993755 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.53 cputime=2.441 memavail=7294048 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 794799.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2915 bytes_read=7865 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993570 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.53 cputime=2.461 memavail=7293600 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794800.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2921 bytes_read=7971 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993433 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.53 cputime=2.481 memavail=7293376 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794801.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2927 bytes_read=8107 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993325 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.53 cputime=2.497 memavail=7293376 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794802.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2933 bytes_read=8227 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993287 heater_bed: target=0 temp=29.6 pwm=0.000  sysload=0.49 cputime=2.519 memavail=7293152 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794803.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2939 bytes_read=8333 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993670 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.49 cputime=2.543 memavail=7293152 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794804.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2945 bytes_read=8469 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993569 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.49 cputime=2.568 memavail=7293152 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794805.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2951 bytes_read=8575 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993484 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.49 cputime=2.590 memavail=7293152 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794806.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2957 bytes_read=8681 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993414 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.49 cputime=2.608 memavail=7293156 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 794807.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2963 bytes_read=8831 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993367 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.45 cputime=2.632 memavail=7292692 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794808.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2969 bytes_read=8937 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993347 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.45 cputime=2.649 memavail=7292692 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 794809.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2975 bytes_read=9043 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993305 heater_bed: target=0 temp=29.6 pwm=0.000  sysload=0.45 cputime=2.668 memavail=7292468 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794810.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2981 bytes_read=9179 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993279 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.45 cputime=2.687 memavail=7292244 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 794811.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2987 bytes_read=9285 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993409 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.45 cputime=2.705 memavail=7292020 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794812.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2993 bytes_read=9399 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993366 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.41 cputime=2.727 memavail=7295016 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794813.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2999 bytes_read=9526 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993327 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.41 cputime=2.749 memavail=7294288 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794814.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3005 bytes_read=9631 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993301 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.41 cputime=2.767 memavail=7294064 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794815.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3011 bytes_read=9737 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993280 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.41 cputime=2.783 memavail=7293840 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794816.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3017 bytes_read=9873 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993255 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.41 cputime=2.803 memavail=7293616 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794817.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3023 bytes_read=9993 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993235 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.46 cputime=2.827 memavail=7293392 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794818.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3035 bytes_read=10115 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993210 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.46 cputime=2.849 memavail=7293168 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794819.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3041 bytes_read=10251 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993325 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.46 cputime=2.870 memavail=7292944 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794820.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3047 bytes_read=10357 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993301 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.46 cputime=2.893 memavail=7292720 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794821.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3053 bytes_read=10463 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993281 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.46 cputime=2.920 memavail=7291464 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794822.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3059 bytes_read=10613 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993265 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.50 cputime=2.943 memavail=7290992 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794823.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3065 bytes_read=10719 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993257 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.50 cputime=2.962 memavail=7290768 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794824.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3071 bytes_read=10825 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993241 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.50 cputime=2.982 memavail=7290544 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794825.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3077 bytes_read=10961 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993248 heater_bed: target=0 temp=29.4 pwm=0.000  sysload=0.50 cputime=3.008 memavail=7290544 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794826.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3083 bytes_read=11067 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993234 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.50 cputime=3.032 memavail=7293488 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 794827.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3089 bytes_read=11202 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993228 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.54 cputime=3.059 memavail=7293328 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 794828.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3095 bytes_read=11323 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993383 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.54 cputime=3.084 memavail=7293104 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 794829.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3101 bytes_read=11429 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993361 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.54 cputime=3.103 memavail=7292880 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794830.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3107 bytes_read=11550 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993351 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.54 cputime=3.124 memavail=7292656 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794831.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3113 bytes_read=11671 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993343 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.54 cputime=3.152 memavail=7292656 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794832.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3119 bytes_read=11791 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993327 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.66 cputime=3.177 memavail=7291900 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 794833.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3125 bytes_read=11912 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993312 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.66 cputime=3.200 memavail=7291900 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 794834.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3131 bytes_read=12033 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993296 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.66 cputime=3.220 memavail=7291900 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 794835.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3137 bytes_read=12139 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993284 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.66 cputime=3.244 memavail=7291900 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 794836.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3143 bytes_read=12260 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993269 heater_bed: target=0 temp=29.5 pwm=0.000  sysload=0.66 cputime=3.271 memavail=7291900 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Starting SD card print (position 0)
Stats 796327.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12259 bytes_read=188981 bytes_retransmit=9 bytes_invalid=0 send_seq=1812 receive_seq=1812 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993207 heater_bed: target=80 temp=27.0 pwm=1.000 sd_pos=10963 sysload=0.17 cputime=33.927 memavail=7293456 print_time=1550.366 buffer_time=0.000 print_stall=0 extruder: target=250 temp=26.3 pwm=1.000
Heater extruder approaching new target of 250.000
Heater heater_bed approaching new target of 80.000
Stats 796328.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12265 bytes_read=189116 bytes_retransmit=9 bytes_invalid=0 send_seq=1813 receive_seq=1813 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993200 heater_bed: target=80 temp=26.9 pwm=1.000 sd_pos=10963 sysload=0.24 cputime=33.949 memavail=7291216 print_time=1551.367 buffer_time=0.000 print_stall=0 extruder: target=250 temp=27.9 pwm=1.000
Stats 796329.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12271 bytes_read=189222 bytes_retransmit=9 bytes_invalid=0 send_seq=1814 receive_seq=1814 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993194 heater_bed: target=80 temp=26.9 pwm=1.000 sd_pos=10963 sysload=0.24 cputime=33.976 memavail=7290760 print_time=1552.367 buffer_time=0.000 print_stall=0 extruder: target=250 temp=31.2 pwm=1.000
Stats 796330.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12277 bytes_read=189343 bytes_retransmit=9 bytes_invalid=0 send_seq=1815 receive_seq=1815 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993194 heater_bed: target=80 temp=26.9 pwm=1.000 sd_pos=10963 sysload=0.24 cputime=34.000 memavail=7291808 print_time=1553.369 buffer_time=0.000 print_stall=0 extruder: target=250 temp=35.4 pwm=1.000
Stats 796331.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12310 bytes_read=189469 bytes_retransmit=9 bytes_invalid=0 send_seq=1817 receive_seq=1817 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993192 heater_bed: target=80 temp=27.0 pwm=1.000 sd_pos=10963 sysload=0.24 cputime=34.020 memavail=7289516 print_time=1554.369 buffer_time=0.000 print_stall=0 extruder: target=250 temp=41.5 pwm=1.000
Stats 796332.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12316 bytes_read=189575 bytes_retransmit=9 bytes_invalid=0 send_seq=1818 receive_seq=1818 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993191 heater_bed: target=80 temp=27.1 pwm=1.000 sd_pos=10963 sysload=0.24 cputime=34.044 memavail=7290872 print_time=1555.370 buffer_time=0.000 print_stall=0 extruder: target=250 temp=46.0 pwm=1.000
Stats 796333.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12322 bytes_read=189710 bytes_retransmit=9 bytes_invalid=0 send_seq=1819 receive_seq=1819 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993188 heater_bed: target=80 temp=27.2 pwm=1.000 sd_pos=10963 sysload=0.54 cputime=34.067 memavail=7292728 print_time=1556.370 buffer_time=0.000 print_stall=0 extruder: target=250 temp=50.4 pwm=1.000
Stats 796334.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12328 bytes_read=189831 bytes_retransmit=9 bytes_invalid=0 send_seq=1820 receive_seq=1820 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993234 heater_bed: target=80 temp=27.4 pwm=1.000 sd_pos=10963 sysload=0.54 cputime=34.090 memavail=7291524 print_time=1557.371 buffer_time=0.000 print_stall=0 extruder: target=250 temp=56.2 pwm=1.000
Stats 796335.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12366 bytes_read=189947 bytes_retransmit=9 bytes_invalid=0 send_seq=1823 receive_seq=1823 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=27.6 pwm=1.000 sd_pos=10963 sysload=0.54 cputime=34.114 memavail=7294076 print_time=1558.372 buffer_time=0.000 print_stall=0 extruder: target=250 temp=60.4 pwm=1.000
Stats 796336.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12372 bytes_read=190068 bytes_retransmit=9 bytes_invalid=0 send_seq=1824 receive_seq=1824 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=27.9 pwm=1.000 sd_pos=10963 sysload=0.54 cputime=34.142 memavail=7293152 print_time=1559.373 buffer_time=0.000 print_stall=0 extruder: target=250 temp=64.4 pwm=1.000
Stats 796337.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12378 bytes_read=190189 bytes_retransmit=9 bytes_invalid=0 send_seq=1825 receive_seq=1825 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993225 heater_bed: target=80 temp=28.2 pwm=1.000 sd_pos=10963 sysload=0.54 cputime=34.169 memavail=7292928 print_time=1560.373 buffer_time=0.000 print_stall=0 extruder: target=250 temp=69.7 pwm=1.000
Stats 796338.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12384 bytes_read=190309 bytes_retransmit=9 bytes_invalid=0 send_seq=1826 receive_seq=1826 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993222 heater_bed: target=80 temp=28.4 pwm=1.000 sd_pos=10963 sysload=0.58 cputime=34.192 memavail=7292676 print_time=1561.374 buffer_time=0.000 print_stall=0 extruder: target=250 temp=73.5 pwm=1.000
Stats 796339.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12406 bytes_read=190435 bytes_retransmit=9 bytes_invalid=0 send_seq=1828 receive_seq=1828 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993219 heater_bed: target=80 temp=28.8 pwm=1.000 sd_pos=10963 sysload=0.58 cputime=34.217 memavail=7292676 print_time=1562.375 buffer_time=0.000 print_stall=0 extruder: target=250 temp=77.3 pwm=1.000
Stats 796340.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12428 bytes_read=190561 bytes_retransmit=9 bytes_invalid=0 send_seq=1830 receive_seq=1830 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993216 heater_bed: target=80 temp=29.2 pwm=1.000 sd_pos=10963 sysload=0.58 cputime=34.239 memavail=7292676 print_time=1563.375 buffer_time=0.000 print_stall=0 extruder: target=250 temp=82.2 pwm=1.000
Stats 796341.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12434 bytes_read=190667 bytes_retransmit=9 bytes_invalid=0 send_seq=1831 receive_seq=1831 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993212 heater_bed: target=80 temp=29.4 pwm=1.000 sd_pos=10963 sysload=0.58 cputime=34.262 memavail=7292676 print_time=1564.376 buffer_time=0.000 print_stall=0 extruder: target=250 temp=85.9 pwm=1.000
Stats 796342.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12440 bytes_read=190788 bytes_retransmit=9 bytes_invalid=0 send_seq=1832 receive_seq=1832 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993212 heater_bed: target=80 temp=29.8 pwm=1.000 sd_pos=10963 sysload=0.58 cputime=34.292 memavail=7292676 print_time=1565.377 buffer_time=0.000 print_stall=0 extruder: target=250 temp=89.4 pwm=1.000
Stats 796343.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12462 bytes_read=190928 bytes_retransmit=9 bytes_invalid=0 send_seq=1834 receive_seq=1834 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993238 heater_bed: target=80 temp=30.2 pwm=1.000 sd_pos=10963 sysload=0.61 cputime=34.330 memavail=7292676 print_time=1566.377 buffer_time=0.000 print_stall=0 extruder: target=250 temp=94.2 pwm=1.000
Stats 796344.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12479 bytes_read=191034 bytes_retransmit=9 bytes_invalid=0 send_seq=1835 receive_seq=1835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993234 heater_bed: target=80 temp=30.5 pwm=1.000 sd_pos=10963 sysload=0.61 cputime=34.359 memavail=7291920 print_time=1567.378 buffer_time=0.000 print_stall=0 extruder: target=250 temp=97.6 pwm=1.000
Stats 796345.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12485 bytes_read=191155 bytes_retransmit=9 bytes_invalid=0 send_seq=1836 receive_seq=1836 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993231 heater_bed: target=80 temp=31.0 pwm=1.000 sd_pos=10963 sysload=0.61 cputime=34.386 memavail=7291924 print_time=1568.379 buffer_time=0.000 print_stall=0 extruder: target=250 temp=101.1 pwm=1.000
Stats 796346.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12491 bytes_read=191276 bytes_retransmit=9 bytes_invalid=0 send_seq=1837 receive_seq=1837 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=31.3 pwm=1.000 sd_pos=10963 sysload=0.61 cputime=34.418 memavail=7291924 print_time=1569.380 buffer_time=0.000 print_stall=0 extruder: target=250 temp=105.6 pwm=1.000
Stats 796347.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12497 bytes_read=191382 bytes_retransmit=9 bytes_invalid=0 send_seq=1838 receive_seq=1838 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993227 heater_bed: target=80 temp=31.6 pwm=1.000 sd_pos=10963 sysload=0.61 cputime=34.444 memavail=7291924 print_time=1570.381 buffer_time=0.000 print_stall=0 extruder: target=250 temp=109.0 pwm=1.000
Stats 796348.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12535 bytes_read=191513 bytes_retransmit=9 bytes_invalid=0 send_seq=1841 receive_seq=1841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993225 heater_bed: target=80 temp=32.0 pwm=1.000 sd_pos=10963 sysload=0.64 cputime=34.472 memavail=7291924 print_time=1571.382 buffer_time=0.000 print_stall=0 extruder: target=250 temp=112.3 pwm=1.000
Stats 796349.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12541 bytes_read=191648 bytes_retransmit=9 bytes_invalid=0 send_seq=1842 receive_seq=1842 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993222 heater_bed: target=80 temp=32.4 pwm=1.000 sd_pos=10963 sysload=0.64 cputime=34.497 memavail=7291924 print_time=1572.383 buffer_time=0.000 print_stall=0 extruder: target=250 temp=116.7 pwm=1.000
Stats 796350.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12547 bytes_read=191754 bytes_retransmit=9 bytes_invalid=0 send_seq=1843 receive_seq=1843 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993219 heater_bed: target=80 temp=32.8 pwm=1.000 sd_pos=10963 sysload=0.64 cputime=34.519 memavail=7291924 print_time=1573.384 buffer_time=0.000 print_stall=0 extruder: target=250 temp=120.0 pwm=1.000
Stats 796351.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12553 bytes_read=191867 bytes_retransmit=9 bytes_invalid=0 send_seq=1844 receive_seq=1844 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993216 heater_bed: target=80 temp=33.2 pwm=1.000 sd_pos=10963 sysload=0.64 cputime=34.547 memavail=7291924 print_time=1574.385 buffer_time=0.000 print_stall=0 extruder: target=250 temp=123.2 pwm=1.000
Stats 796352.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12591 bytes_read=191986 bytes_retransmit=9 bytes_invalid=0 send_seq=1847 receive_seq=1847 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993251 heater_bed: target=80 temp=33.5 pwm=1.000 sd_pos=10963 sysload=0.64 cputime=34.580 memavail=7291924 print_time=1575.385 buffer_time=0.000 print_stall=0 extruder: target=250 temp=127.4 pwm=1.000
Stats 796353.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12597 bytes_read=192087 bytes_retransmit=9 bytes_invalid=0 send_seq=1848 receive_seq=1848 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993247 heater_bed: target=80 temp=33.9 pwm=1.000 sd_pos=10963 sysload=0.67 cputime=34.603 memavail=7291924 print_time=1576.385 buffer_time=0.000 print_stall=0 extruder: target=250 temp=130.6 pwm=1.000
Stats 796354.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12603 bytes_read=192219 bytes_retransmit=9 bytes_invalid=0 send_seq=1849 receive_seq=1849 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993242 heater_bed: target=80 temp=34.3 pwm=1.000 sd_pos=10963 sysload=0.67 cputime=34.624 memavail=7290924 print_time=1577.386 buffer_time=0.000 print_stall=0 extruder: target=250 temp=133.7 pwm=1.000
Stats 796355.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12615 bytes_read=192352 bytes_retransmit=9 bytes_invalid=0 send_seq=1851 receive_seq=1851 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993236 heater_bed: target=80 temp=34.7 pwm=1.000 sd_pos=10963 sysload=0.67 cputime=34.644 memavail=7290928 print_time=1578.386 buffer_time=0.000 print_stall=0 extruder: target=250 temp=137.9 pwm=1.000
Stats 796356.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12653 bytes_read=192465 bytes_retransmit=9 bytes_invalid=0 send_seq=1854 receive_seq=1854 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993232 heater_bed: target=80 temp=35.0 pwm=1.000 sd_pos=10963 sysload=0.67 cputime=34.668 memavail=7290928 print_time=1579.387 buffer_time=0.000 print_stall=0 extruder: target=250 temp=141.0 pwm=1.000
Stats 796357.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12659 bytes_read=192583 bytes_retransmit=9 bytes_invalid=0 send_seq=1855 receive_seq=1855 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993228 heater_bed: target=80 temp=35.5 pwm=1.000 sd_pos=10963 sysload=0.67 cputime=34.695 memavail=7290928 print_time=1580.388 buffer_time=0.000 print_stall=0 extruder: target=250 temp=144.0 pwm=1.000
Stats 796358.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12665 bytes_read=192700 bytes_retransmit=9 bytes_invalid=0 send_seq=1856 receive_seq=1856 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993225 heater_bed: target=80 temp=35.8 pwm=1.000 sd_pos=10963 sysload=0.70 cputime=34.718 memavail=7290928 print_time=1581.388 buffer_time=0.000 print_stall=0 extruder: target=250 temp=148.1 pwm=1.000
Stats 796359.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12671 bytes_read=192817 bytes_retransmit=9 bytes_invalid=0 send_seq=1857 receive_seq=1857 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993225 heater_bed: target=80 temp=36.3 pwm=1.000 sd_pos=10963 sysload=0.70 cputime=34.738 memavail=7290928 print_time=1582.389 buffer_time=0.000 print_stall=0 extruder: target=250 temp=151.0 pwm=1.000
Stats 796360.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12709 bytes_read=192945 bytes_retransmit=9 bytes_invalid=0 send_seq=1860 receive_seq=1860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993255 heater_bed: target=80 temp=36.6 pwm=1.000 sd_pos=10963 sysload=0.70 cputime=34.760 memavail=7290928 print_time=1583.389 buffer_time=0.000 print_stall=0 extruder: target=250 temp=154.0 pwm=1.000
Stats 796361.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12715 bytes_read=193062 bytes_retransmit=9 bytes_invalid=0 send_seq=1861 receive_seq=1861 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993250 heater_bed: target=80 temp=37.0 pwm=1.000 sd_pos=10963 sysload=0.70 cputime=34.778 memavail=7290928 print_time=1584.390 buffer_time=0.000 print_stall=0 extruder: target=250 temp=157.9 pwm=1.000
Stats 796362.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12721 bytes_read=193165 bytes_retransmit=9 bytes_invalid=0 send_seq=1862 receive_seq=1862 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993245 heater_bed: target=80 temp=37.3 pwm=1.000 sd_pos=10963 sysload=0.70 cputime=34.803 memavail=7290928 print_time=1585.391 buffer_time=0.000 print_stall=0 extruder: target=250 temp=160.8 pwm=1.000
Stats 796363.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12727 bytes_read=193283 bytes_retransmit=9 bytes_invalid=0 send_seq=1863 receive_seq=1863 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993242 heater_bed: target=80 temp=37.7 pwm=1.000 sd_pos=10963 sysload=0.80 cputime=34.826 memavail=7290928 print_time=1586.392 buffer_time=0.000 print_stall=0 extruder: target=250 temp=163.7 pwm=1.000
Stats 796364.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12749 bytes_read=193419 bytes_retransmit=9 bytes_invalid=0 send_seq=1865 receive_seq=1865 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993242 heater_bed: target=80 temp=38.1 pwm=1.000 sd_pos=10963 sysload=0.80 cputime=34.848 memavail=7283468 print_time=1587.393 buffer_time=0.000 print_stall=0 extruder: target=250 temp=167.6 pwm=1.000
Stats 796365.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12771 bytes_read=193527 bytes_retransmit=9 bytes_invalid=0 send_seq=1867 receive_seq=1867 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993302 heater_bed: target=80 temp=38.5 pwm=1.000 sd_pos=10963 sysload=0.80 cputime=34.884 memavail=7290116 print_time=1588.398 buffer_time=0.000 print_stall=0 extruder: target=250 temp=170.4 pwm=1.000
Stats 796366.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12777 bytes_read=193645 bytes_retransmit=9 bytes_invalid=0 send_seq=1868 receive_seq=1868 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993291 heater_bed: target=80 temp=38.9 pwm=1.000 sd_pos=10963 sysload=0.80 cputime=34.917 memavail=7290116 print_time=1589.398 buffer_time=0.000 print_stall=0 extruder: target=250 temp=173.2 pwm=1.000
Stats 796367.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12783 bytes_read=193762 bytes_retransmit=9 bytes_invalid=0 send_seq=1869 receive_seq=1869 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993280 heater_bed: target=80 temp=39.2 pwm=1.000 sd_pos=10963 sysload=0.80 cputime=34.944 memavail=7290116 print_time=1590.400 buffer_time=0.000 print_stall=0 extruder: target=250 temp=176.9 pwm=1.000
Stats 796368.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12789 bytes_read=193865 bytes_retransmit=9 bytes_invalid=0 send_seq=1870 receive_seq=1870 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993270 heater_bed: target=80 temp=39.6 pwm=1.000 sd_pos=10963 sysload=0.82 cputime=34.965 memavail=7290116 print_time=1591.400 buffer_time=0.000 print_stall=0 extruder: target=250 temp=179.7 pwm=1.000
Stats 796369.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12827 bytes_read=194007 bytes_retransmit=9 bytes_invalid=0 send_seq=1873 receive_seq=1873 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993309 heater_bed: target=80 temp=40.0 pwm=1.000 sd_pos=10963 sysload=0.82 cputime=34.997 memavail=7290116 print_time=1592.401 buffer_time=0.000 print_stall=0 extruder: target=250 temp=182.5 pwm=1.000
Stats 796370.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12833 bytes_read=194124 bytes_retransmit=9 bytes_invalid=0 send_seq=1874 receive_seq=1874 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993301 heater_bed: target=80 temp=40.3 pwm=1.000 sd_pos=10963 sysload=0.82 cputime=35.022 memavail=7290116 print_time=1593.402 buffer_time=0.000 print_stall=0 extruder: target=250 temp=186.1 pwm=1.000
Stats 796371.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12839 bytes_read=194227 bytes_retransmit=9 bytes_invalid=0 send_seq=1875 receive_seq=1875 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993295 heater_bed: target=80 temp=40.7 pwm=1.000 sd_pos=10963 sysload=0.82 cputime=35.050 memavail=7290116 print_time=1594.402 buffer_time=0.000 print_stall=0 extruder: target=250 temp=188.8 pwm=1.000
Stats 796372.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12845 bytes_read=194345 bytes_retransmit=9 bytes_invalid=0 send_seq=1876 receive_seq=1876 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993287 heater_bed: target=80 temp=41.0 pwm=1.000 sd_pos=10963 sysload=0.82 cputime=35.077 memavail=7289892 print_time=1595.402 buffer_time=0.000 print_stall=0 extruder: target=250 temp=191.5 pwm=1.000
Stats 796373.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12883 bytes_read=194472 bytes_retransmit=9 bytes_invalid=0 send_seq=1879 receive_seq=1879 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993289 heater_bed: target=80 temp=41.4 pwm=1.000 sd_pos=10963 sysload=0.75 cputime=35.102 memavail=7289892 print_time=1596.402 buffer_time=0.000 print_stall=0 extruder: target=250 temp=195.1 pwm=1.000
Stats 796374.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12889 bytes_read=194589 bytes_retransmit=9 bytes_invalid=0 send_seq=1880 receive_seq=1880 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993283 heater_bed: target=80 temp=41.7 pwm=1.000 sd_pos=10963 sysload=0.75 cputime=35.122 memavail=7289536 print_time=1597.403 buffer_time=0.000 print_stall=0 extruder: target=250 temp=197.7 pwm=1.000
Stats 796375.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12895 bytes_read=194707 bytes_retransmit=9 bytes_invalid=0 send_seq=1881 receive_seq=1881 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993276 heater_bed: target=80 temp=42.2 pwm=1.000 sd_pos=10963 sysload=0.75 cputime=35.151 memavail=7289640 print_time=1598.404 buffer_time=0.000 print_stall=0 extruder: target=250 temp=200.3 pwm=1.000
Stats 796376.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12901 bytes_read=194824 bytes_retransmit=9 bytes_invalid=0 send_seq=1882 receive_seq=1882 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993269 heater_bed: target=80 temp=42.5 pwm=1.000 sd_pos=10963 sysload=0.75 cputime=35.176 memavail=7289640 print_time=1599.405 buffer_time=0.000 print_stall=0 extruder: target=250 temp=203.8 pwm=1.000
Stats 796377.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12939 bytes_read=194937 bytes_retransmit=9 bytes_invalid=0 send_seq=1885 receive_seq=1885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993263 heater_bed: target=80 temp=42.8 pwm=1.000 sd_pos=10963 sysload=0.75 cputime=35.200 memavail=7289640 print_time=1600.406 buffer_time=0.000 print_stall=0 extruder: target=250 temp=206.4 pwm=1.000
Stats 796378.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12945 bytes_read=195055 bytes_retransmit=9 bytes_invalid=0 send_seq=1886 receive_seq=1886 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993321 heater_bed: target=80 temp=43.3 pwm=1.000 sd_pos=10963 sysload=0.69 cputime=35.223 memavail=7289640 print_time=1601.406 buffer_time=0.000 print_stall=0 extruder: target=250 temp=208.9 pwm=1.000
Stats 796379.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12951 bytes_read=195186 bytes_retransmit=9 bytes_invalid=0 send_seq=1887 receive_seq=1887 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993311 heater_bed: target=80 temp=43.6 pwm=1.000 sd_pos=10963 sysload=0.69 cputime=35.247 memavail=7289640 print_time=1602.407 buffer_time=0.000 print_stall=0 extruder: target=250 temp=212.2 pwm=1.000
Stats 796380.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12957 bytes_read=195289 bytes_retransmit=9 bytes_invalid=0 send_seq=1888 receive_seq=1888 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993302 heater_bed: target=80 temp=43.9 pwm=1.000 sd_pos=10963 sysload=0.69 cputime=35.274 memavail=7289640 print_time=1603.408 buffer_time=0.000 print_stall=0 extruder: target=250 temp=214.8 pwm=1.000
Stats 796381.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=12995 bytes_read=195417 bytes_retransmit=9 bytes_invalid=0 send_seq=1891 receive_seq=1891 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993295 heater_bed: target=80 temp=44.3 pwm=1.000 sd_pos=10963 sysload=0.69 cputime=35.303 memavail=7289640 print_time=1604.409 buffer_time=0.000 print_stall=0 extruder: target=250 temp=217.1 pwm=1.000
Stats 796382.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13001 bytes_read=195534 bytes_retransmit=9 bytes_invalid=0 send_seq=1892 receive_seq=1892 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993317 heater_bed: target=80 temp=44.6 pwm=1.000 sd_pos=10963 sysload=0.69 cputime=35.332 memavail=7289640 print_time=1605.410 buffer_time=0.000 print_stall=0 extruder: target=250 temp=220.4 pwm=1.000
Stats 796383.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13007 bytes_read=195637 bytes_retransmit=9 bytes_invalid=0 send_seq=1893 receive_seq=1893 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993312 heater_bed: target=80 temp=44.9 pwm=1.000 sd_pos=10963 sysload=0.64 cputime=35.353 memavail=7289640 print_time=1606.410 buffer_time=0.000 print_stall=0 extruder: target=250 temp=222.9 pwm=1.000
Stats 796384.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13013 bytes_read=195769 bytes_retransmit=9 bytes_invalid=0 send_seq=1894 receive_seq=1894 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993303 heater_bed: target=80 temp=45.4 pwm=1.000 sd_pos=10963 sysload=0.64 cputime=35.376 memavail=7289388 print_time=1607.411 buffer_time=0.000 print_stall=0 extruder: target=250 temp=225.2 pwm=1.000
Stats 796385.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13035 bytes_read=195891 bytes_retransmit=9 bytes_invalid=0 send_seq=1896 receive_seq=1896 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993295 heater_bed: target=80 temp=45.7 pwm=1.000 sd_pos=10963 sysload=0.64 cputime=35.407 memavail=7289396 print_time=1608.412 buffer_time=0.000 print_stall=0 extruder: target=250 temp=228.3 pwm=1.000
Stats 796386.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13057 bytes_read=195997 bytes_retransmit=9 bytes_invalid=0 send_seq=1898 receive_seq=1898 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993289 heater_bed: target=80 temp=45.9 pwm=1.000 sd_pos=10963 sysload=0.64 cputime=35.431 memavail=7289396 print_time=1609.413 buffer_time=0.000 print_stall=0 extruder: target=250 temp=230.9 pwm=1.000
Stats 796387.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13063 bytes_read=196107 bytes_retransmit=9 bytes_invalid=0 send_seq=1899 receive_seq=1899 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993326 heater_bed: target=80 temp=46.3 pwm=1.000 sd_pos=10963 sysload=0.64 cputime=35.457 memavail=7289172 print_time=1610.414 buffer_time=0.000 print_stall=0 extruder: target=250 temp=233.3 pwm=1.000
Stats 796388.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13069 bytes_read=196216 bytes_retransmit=9 bytes_invalid=0 send_seq=1900 receive_seq=1900 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993316 heater_bed: target=80 temp=46.7 pwm=1.000 sd_pos=10963 sysload=0.58 cputime=35.477 memavail=7289172 print_time=1611.414 buffer_time=0.000 print_stall=0 extruder: target=250 temp=236.3 pwm=1.000
Stats 796389.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13123 bytes_read=196348 bytes_retransmit=9 bytes_invalid=0 send_seq=1904 receive_seq=1904 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993306 heater_bed: target=80 temp=47.0 pwm=1.000 sd_pos=10963 sysload=0.58 cputime=35.496 memavail=7289172 print_time=1612.415 buffer_time=0.000 print_stall=0 extruder: target=250 temp=238.7 pwm=0.807
Stats 796390.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13161 bytes_read=196476 bytes_retransmit=9 bytes_invalid=0 send_seq=1907 receive_seq=1907 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993297 heater_bed: target=80 temp=47.4 pwm=1.000 sd_pos=10963 sysload=0.58 cputime=35.524 memavail=7289172 print_time=1613.415 buffer_time=0.000 print_stall=0 extruder: target=250 temp=240.9 pwm=0.702
Stats 796391.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13183 bytes_read=196598 bytes_retransmit=9 bytes_invalid=0 send_seq=1909 receive_seq=1909 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993289 heater_bed: target=80 temp=47.7 pwm=1.000 sd_pos=10963 sysload=0.58 cputime=35.550 memavail=7289172 print_time=1614.415 buffer_time=0.000 print_stall=0 extruder: target=250 temp=243.5 pwm=0.585
Stats 796392.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13237 bytes_read=196716 bytes_retransmit=9 bytes_invalid=0 send_seq=1913 receive_seq=1913 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993281 heater_bed: target=80 temp=48.0 pwm=1.000 sd_pos=10963 sysload=0.58 cputime=35.575 memavail=7289172 print_time=1615.416 buffer_time=0.000 print_stall=0 extruder: target=250 temp=245.4 pwm=0.399
Stats 796393.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13275 bytes_read=196844 bytes_retransmit=9 bytes_invalid=0 send_seq=1916 receive_seq=1916 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993272 heater_bed: target=80 temp=48.4 pwm=1.000 sd_pos=10963 sysload=0.62 cputime=35.595 memavail=7289172 print_time=1616.416 buffer_time=0.000 print_stall=0 extruder: target=250 temp=246.6 pwm=0.431
Heater extruder within range of 250.000
Stats 796394.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13345 bytes_read=196995 bytes_retransmit=9 bytes_invalid=0 send_seq=1921 receive_seq=1921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993263 heater_bed: target=80 temp=48.6 pwm=1.000 sd_pos=10963 sysload=0.62 cputime=35.619 memavail=7289320 print_time=1617.417 buffer_time=0.000 print_stall=0 extruder: target=250 temp=247.9 pwm=0.505
Stats 796395.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13383 bytes_read=197108 bytes_retransmit=9 bytes_invalid=0 send_seq=1924 receive_seq=1924 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993258 heater_bed: target=80 temp=49.0 pwm=1.000 sd_pos=10963 sysload=0.62 cputime=35.637 memavail=7289428 print_time=1618.417 buffer_time=0.000 print_stall=0 extruder: target=250 temp=248.6 pwm=0.511
Stats 796396.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13421 bytes_read=197236 bytes_retransmit=9 bytes_invalid=0 send_seq=1927 receive_seq=1927 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993252 heater_bed: target=80 temp=49.3 pwm=1.000 sd_pos=10963 sysload=0.62 cputime=35.662 memavail=7289428 print_time=1619.418 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.2 pwm=0.457
Stats 796397.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13443 bytes_read=197358 bytes_retransmit=9 bytes_invalid=0 send_seq=1929 receive_seq=1929 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993245 heater_bed: target=80 temp=49.6 pwm=1.000 sd_pos=10963 sysload=0.62 cputime=35.683 memavail=7288980 print_time=1620.419 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.337
Stats 796398.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13465 bytes_read=197466 bytes_retransmit=9 bytes_invalid=0 send_seq=1931 receive_seq=1931 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993239 heater_bed: target=80 temp=49.9 pwm=1.000 sd_pos=10963 sysload=0.65 cputime=35.702 memavail=7288980 print_time=1621.419 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.5 pwm=0.337
Stats 796399.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13487 bytes_read=197603 bytes_retransmit=9 bytes_invalid=0 send_seq=1933 receive_seq=1933 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993241 heater_bed: target=80 temp=50.3 pwm=1.000 sd_pos=10963 sysload=0.65 cputime=35.724 memavail=7288980 print_time=1622.420 buffer_time=0.000 print_stall=0 extruder: target=250 temp=251.0 pwm=0.219
Stats 796400.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13557 bytes_read=197740 bytes_retransmit=9 bytes_invalid=0 send_seq=1938 receive_seq=1938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993239 heater_bed: target=80 temp=50.6 pwm=1.000 sd_pos=10963 sysload=0.65 cputime=35.753 memavail=7288980 print_time=1623.420 buffer_time=0.000 print_stall=0 extruder: target=250 temp=251.4 pwm=0.229
Stats 796401.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13595 bytes_read=197853 bytes_retransmit=9 bytes_invalid=0 send_seq=1941 receive_seq=1941 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993235 heater_bed: target=80 temp=50.8 pwm=1.000 sd_pos=10963 sysload=0.65 cputime=35.776 memavail=7288980 print_time=1624.421 buffer_time=0.000 print_stall=0 extruder: target=250 temp=251.8 pwm=0.135
Stats 796402.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13665 bytes_read=197991 bytes_retransmit=9 bytes_invalid=0 send_seq=1946 receive_seq=1946 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993230 heater_bed: target=80 temp=51.2 pwm=1.000 sd_pos=10963 sysload=0.65 cputime=35.797 memavail=7288980 print_time=1625.421 buffer_time=0.000 print_stall=0 extruder: target=250 temp=251.1 pwm=0.446
Stats 796403.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13719 bytes_read=198123 bytes_retransmit=9 bytes_invalid=0 send_seq=1950 receive_seq=1950 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993224 heater_bed: target=80 temp=51.5 pwm=1.000 sd_pos=10963 sysload=0.68 cputime=35.819 memavail=7288980 print_time=1626.422 buffer_time=0.000 print_stall=0 extruder: target=250 temp=251.4 pwm=0.243
Stats 796404.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13768 bytes_read=198250 bytes_retransmit=9 bytes_invalid=0 send_seq=1953 receive_seq=1953 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993222 heater_bed: target=80 temp=51.8 pwm=1.000 sd_pos=10963 sysload=0.68 cputime=35.844 memavail=7290980 print_time=1627.422 buffer_time=0.000 print_stall=0 extruder: target=250 temp=251.4 pwm=0.275
Stats 796405.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13790 bytes_read=198387 bytes_retransmit=9 bytes_invalid=0 send_seq=1955 receive_seq=1955 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993225 heater_bed: target=80 temp=52.2 pwm=1.000 sd_pos=10963 sysload=0.68 cputime=35.867 memavail=7291860 print_time=1628.423 buffer_time=0.000 print_stall=0 extruder: target=250 temp=251.4 pwm=0.282
Stats 796406.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13843 bytes_read=198505 bytes_retransmit=9 bytes_invalid=0 send_seq=1959 receive_seq=1959 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993220 heater_bed: target=80 temp=52.5 pwm=1.000 sd_pos=10963 sysload=0.68 cputime=35.891 memavail=7290492 print_time=1629.424 buffer_time=0.000 print_stall=0 extruder: target=250 temp=251.7 pwm=0.211
Stats 796407.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13881 bytes_read=198618 bytes_retransmit=9 bytes_invalid=0 send_seq=1962 receive_seq=1962 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993212 heater_bed: target=80 temp=52.8 pwm=1.000 sd_pos=10963 sysload=0.68 cputime=35.922 memavail=7292668 print_time=1630.425 buffer_time=0.000 print_stall=0 extruder: target=250 temp=251.3 pwm=0.326
Stats 796408.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13919 bytes_read=198760 bytes_retransmit=9 bytes_invalid=0 send_seq=1965 receive_seq=1965 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993209 heater_bed: target=80 temp=53.1 pwm=1.000 sd_pos=10963 sysload=0.94 cputime=35.952 memavail=7291088 print_time=1631.426 buffer_time=0.000 print_stall=0 extruder: target=250 temp=251.3 pwm=0.299
Stats 796409.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13957 bytes_read=198887 bytes_retransmit=9 bytes_invalid=0 send_seq=1968 receive_seq=1968 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993206 heater_bed: target=80 temp=53.4 pwm=1.000 sd_pos=10963 sysload=0.94 cputime=35.981 memavail=7290864 print_time=1632.427 buffer_time=0.000 print_stall=0 extruder: target=250 temp=251.2 pwm=0.274
Stats 796410.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=13963 bytes_read=198990 bytes_retransmit=9 bytes_invalid=0 send_seq=1969 receive_seq=1969 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993204 heater_bed: target=80 temp=53.6 pwm=1.000 sd_pos=10963 sysload=0.94 cputime=36.004 memavail=7290864 print_time=1633.428 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.9 pwm=0.274
Stats 796411.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14016 bytes_read=199137 bytes_retransmit=9 bytes_invalid=0 send_seq=1973 receive_seq=1973 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993200 heater_bed: target=80 temp=54.0 pwm=1.000 sd_pos=10963 sysload=0.94 cputime=36.029 memavail=7290864 print_time=1634.429 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.9 pwm=0.291
Stats 796412.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14070 bytes_read=199255 bytes_retransmit=9 bytes_invalid=0 send_seq=1977 receive_seq=1977 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993198 heater_bed: target=80 temp=54.3 pwm=1.000 sd_pos=10963 sysload=0.94 cputime=36.056 memavail=7290864 print_time=1635.429 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.7 pwm=0.301
Stats 796413.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14108 bytes_read=199368 bytes_retransmit=9 bytes_invalid=0 send_seq=1980 receive_seq=1980 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993206 heater_bed: target=80 temp=54.6 pwm=1.000 sd_pos=10963 sysload=0.95 cputime=36.082 memavail=7293588 print_time=1636.430 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.9 pwm=0.219
Stats 796414.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14130 bytes_read=199519 bytes_retransmit=9 bytes_invalid=0 send_seq=1982 receive_seq=1982 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993254 heater_bed: target=80 temp=54.9 pwm=1.000 sd_pos=10963 sysload=0.95 cputime=36.109 memavail=7291080 print_time=1637.431 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.7 pwm=0.275
Stats 796415.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14184 bytes_read=199637 bytes_retransmit=9 bytes_invalid=0 send_seq=1986 receive_seq=1986 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993249 heater_bed: target=80 temp=55.2 pwm=1.000 sd_pos=10963 sysload=0.95 cputime=36.128 memavail=7293032 print_time=1638.431 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.5 pwm=0.298
Stats 796416.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14190 bytes_read=199740 bytes_retransmit=9 bytes_invalid=0 send_seq=1987 receive_seq=1987 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993242 heater_bed: target=80 temp=55.5 pwm=1.000 sd_pos=10963 sysload=0.95 cputime=36.146 memavail=7291888 print_time=1639.432 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.5 pwm=0.298
Stats 796417.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14229 bytes_read=199893 bytes_retransmit=9 bytes_invalid=0 send_seq=1990 receive_seq=1990 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993230 heater_bed: target=80 temp=55.9 pwm=1.000 sd_pos=10963 sysload=0.95 cputime=36.174 memavail=7293976 print_time=1640.432 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.394
Stats 796418.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14267 bytes_read=200006 bytes_retransmit=9 bytes_invalid=0 send_seq=1993 receive_seq=1993 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993237 heater_bed: target=80 temp=56.1 pwm=1.000 sd_pos=10963 sysload=1.03 cputime=36.200 memavail=7292248 print_time=1641.433 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.5 pwm=0.146
Stats 796419.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14337 bytes_read=200143 bytes_retransmit=9 bytes_invalid=0 send_seq=1998 receive_seq=1998 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993233 heater_bed: target=80 temp=56.4 pwm=1.000 sd_pos=10963 sysload=1.03 cputime=36.229 memavail=7291784 print_time=1642.434 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.306
Stats 796420.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14375 bytes_read=200285 bytes_retransmit=9 bytes_invalid=0 send_seq=2001 receive_seq=2001 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=56.7 pwm=1.000 sd_pos=10963 sysload=1.03 cputime=36.258 memavail=7291784 print_time=1643.434 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.261
Stats 796421.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14424 bytes_read=200398 bytes_retransmit=9 bytes_invalid=0 send_seq=2004 receive_seq=2004 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993226 heater_bed: target=80 temp=57.0 pwm=1.000 sd_pos=10963 sysload=1.03 cputime=36.284 memavail=7291784 print_time=1644.435 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.257
Stats 796422.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14478 bytes_read=200512 bytes_retransmit=9 bytes_invalid=0 send_seq=2008 receive_seq=2008 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993264 heater_bed: target=80 temp=57.2 pwm=1.000 sd_pos=10963 sysload=1.03 cputime=36.309 memavail=7291784 print_time=1645.436 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.243
Stats 796423.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14516 bytes_read=200645 bytes_retransmit=9 bytes_invalid=0 send_seq=2011 receive_seq=2011 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993257 heater_bed: target=80 temp=57.6 pwm=1.000 sd_pos=10963 sysload=1.11 cputime=36.335 memavail=7291784 print_time=1646.437 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.247
Stats 796424.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14538 bytes_read=200762 bytes_retransmit=9 bytes_invalid=0 send_seq=2013 receive_seq=2013 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993248 heater_bed: target=80 temp=57.8 pwm=1.000 sd_pos=10963 sysload=1.11 cputime=36.361 memavail=7291280 print_time=1647.438 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.247
Stats 796425.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14544 bytes_read=200865 bytes_retransmit=9 bytes_invalid=0 send_seq=2014 receive_seq=2014 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993244 heater_bed: target=80 temp=58.1 pwm=1.000 sd_pos=10963 sysload=1.11 cputime=36.392 memavail=7291280 print_time=1648.441 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.247
Stats 796426.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14582 bytes_read=201007 bytes_retransmit=9 bytes_invalid=0 send_seq=2017 receive_seq=2017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993280 heater_bed: target=80 temp=58.4 pwm=1.000 sd_pos=10963 sysload=1.11 cputime=36.424 memavail=7291280 print_time=1649.442 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.239
Stats 796427.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14604 bytes_read=201115 bytes_retransmit=9 bytes_invalid=0 send_seq=2019 receive_seq=2019 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993272 heater_bed: target=80 temp=58.7 pwm=1.000 sd_pos=10963 sysload=1.11 cputime=36.449 memavail=7291280 print_time=1650.442 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.363
Stats 796428.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14658 bytes_read=201233 bytes_retransmit=9 bytes_invalid=0 send_seq=2023 receive_seq=2023 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993266 heater_bed: target=80 temp=59.0 pwm=1.000 sd_pos=10963 sysload=1.18 cputime=36.478 memavail=7291280 print_time=1651.443 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.263
Stats 796429.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14712 bytes_read=201394 bytes_retransmit=9 bytes_invalid=0 send_seq=2027 receive_seq=2027 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993260 heater_bed: target=80 temp=59.3 pwm=1.000 sd_pos=10963 sysload=1.18 cputime=36.511 memavail=7291280 print_time=1652.448 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.192
Stats 796430.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14750 bytes_read=201507 bytes_retransmit=9 bytes_invalid=0 send_seq=2030 receive_seq=2030 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993257 heater_bed: target=80 temp=59.5 pwm=1.000 sd_pos=10963 sysload=1.18 cputime=36.536 memavail=7291280 print_time=1653.447 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.253
Stats 796431.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14804 bytes_read=201640 bytes_retransmit=9 bytes_invalid=0 send_seq=2034 receive_seq=2034 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993286 heater_bed: target=80 temp=59.9 pwm=1.000 sd_pos=10963 sysload=1.18 cputime=36.563 memavail=7291280 print_time=1654.449 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.230
Stats 796432.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14858 bytes_read=201772 bytes_retransmit=9 bytes_invalid=0 send_seq=2038 receive_seq=2038 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993280 heater_bed: target=80 temp=60.2 pwm=1.000 sd_pos=10963 sysload=1.18 cputime=36.591 memavail=7291440 print_time=1655.452 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.357
Stats 796433.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14896 bytes_read=201885 bytes_retransmit=9 bytes_invalid=0 send_seq=2041 receive_seq=2041 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993273 heater_bed: target=80 temp=60.4 pwm=1.000 sd_pos=10963 sysload=1.09 cputime=36.619 memavail=7291536 print_time=1656.450 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.255
Stats 796434.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14918 bytes_read=202022 bytes_retransmit=9 bytes_invalid=0 send_seq=2043 receive_seq=2043 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993268 heater_bed: target=80 temp=60.7 pwm=1.000 sd_pos=10963 sysload=1.09 cputime=36.646 memavail=7290816 print_time=1657.451 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.192
Stats 796435.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=14967 bytes_read=202149 bytes_retransmit=9 bytes_invalid=0 send_seq=2046 receive_seq=2046 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993314 heater_bed: target=80 temp=61.0 pwm=1.000 sd_pos=10963 sysload=1.09 cputime=36.674 memavail=7290816 print_time=1658.452 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.192
Stats 796436.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15021 bytes_read=202267 bytes_retransmit=9 bytes_invalid=0 send_seq=2050 receive_seq=2050 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993303 heater_bed: target=80 temp=61.2 pwm=1.000 sd_pos=10963 sysload=1.09 cputime=36.696 memavail=7290816 print_time=1659.452 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.174
Stats 796437.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15059 bytes_read=202395 bytes_retransmit=9 bytes_invalid=0 send_seq=2053 receive_seq=2053 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993294 heater_bed: target=80 temp=61.5 pwm=1.000 sd_pos=10963 sysload=1.09 cputime=36.721 memavail=7290816 print_time=1660.453 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.326
Stats 796438.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15097 bytes_read=202522 bytes_retransmit=9 bytes_invalid=0 send_seq=2056 receive_seq=2056 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993286 heater_bed: target=80 temp=61.8 pwm=1.000 sd_pos=10963 sysload=1.00 cputime=36.749 memavail=7290816 print_time=1661.454 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.259
Stats 796439.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15135 bytes_read=202649 bytes_retransmit=9 bytes_invalid=0 send_seq=2059 receive_seq=2059 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993281 heater_bed: target=80 temp=62.0 pwm=1.000 sd_pos=10963 sysload=1.00 cputime=36.775 memavail=7290820 print_time=1662.455 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.232
Stats 796440.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15204 bytes_read=202787 bytes_retransmit=9 bytes_invalid=0 send_seq=2064 receive_seq=2064 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993273 heater_bed: target=80 temp=62.3 pwm=1.000 sd_pos=10963 sysload=1.00 cputime=36.803 memavail=7290820 print_time=1663.456 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.295
Stats 796441.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15242 bytes_read=202914 bytes_retransmit=9 bytes_invalid=0 send_seq=2067 receive_seq=2067 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993264 heater_bed: target=80 temp=62.6 pwm=1.000 sd_pos=10963 sysload=1.00 cputime=36.824 memavail=7290820 print_time=1664.457 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.217
Stats 796442.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15291 bytes_read=203027 bytes_retransmit=9 bytes_invalid=0 send_seq=2070 receive_seq=2070 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993258 heater_bed: target=80 temp=62.8 pwm=1.000 sd_pos=10963 sysload=1.00 cputime=36.847 memavail=7290820 print_time=1665.458 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.399
Stats 796443.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15345 bytes_read=203160 bytes_retransmit=9 bytes_invalid=0 send_seq=2074 receive_seq=2074 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993250 heater_bed: target=80 temp=63.2 pwm=1.000 sd_pos=10963 sysload=0.92 cputime=36.872 memavail=7290820 print_time=1666.459 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.263
Stats 796444.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15399 bytes_read=203306 bytes_retransmit=9 bytes_invalid=0 send_seq=2078 receive_seq=2078 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993266 heater_bed: target=80 temp=63.4 pwm=1.000 sd_pos=10963 sysload=0.92 cputime=36.897 memavail=7290064 print_time=1667.460 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.198
Stats 796445.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15453 bytes_read=203424 bytes_retransmit=9 bytes_invalid=0 send_seq=2082 receive_seq=2082 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993259 heater_bed: target=80 temp=63.6 pwm=1.000 sd_pos=10963 sysload=0.92 cputime=36.915 memavail=7290064 print_time=1668.460 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.238
Stats 796446.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15475 bytes_read=203547 bytes_retransmit=9 bytes_invalid=0 send_seq=2084 receive_seq=2084 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993251 heater_bed: target=80 temp=63.9 pwm=1.000 sd_pos=10963 sysload=0.92 cputime=36.933 memavail=7290064 print_time=1669.461 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.173
Stats 796447.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15529 bytes_read=203679 bytes_retransmit=9 bytes_invalid=0 send_seq=2088 receive_seq=2088 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993245 heater_bed: target=80 temp=64.2 pwm=1.000 sd_pos=10963 sysload=0.92 cputime=36.959 memavail=7290064 print_time=1670.461 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.248
Stats 796448.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15567 bytes_read=203792 bytes_retransmit=9 bytes_invalid=0 send_seq=2091 receive_seq=2091 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993239 heater_bed: target=80 temp=64.4 pwm=1.000 sd_pos=10963 sysload=0.85 cputime=36.984 memavail=7290064 print_time=1671.462 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.280
Stats 796449.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15616 bytes_read=203934 bytes_retransmit=9 bytes_invalid=0 send_seq=2094 receive_seq=2094 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993235 heater_bed: target=80 temp=64.7 pwm=1.000 sd_pos=10963 sysload=0.85 cputime=37.008 memavail=7290064 print_time=1672.463 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.311
Stats 796450.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15638 bytes_read=204056 bytes_retransmit=9 bytes_invalid=0 send_seq=2096 receive_seq=2096 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993230 heater_bed: target=80 temp=64.9 pwm=1.000 sd_pos=10963 sysload=0.85 cputime=37.028 memavail=7290064 print_time=1673.464 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.346
Stats 796451.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15692 bytes_read=204174 bytes_retransmit=9 bytes_invalid=0 send_seq=2100 receive_seq=2100 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993225 heater_bed: target=80 temp=65.2 pwm=1.000 sd_pos=10963 sysload=0.85 cputime=37.047 memavail=7290068 print_time=1674.465 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.210
Stats 796452.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15714 bytes_read=204297 bytes_retransmit=9 bytes_invalid=0 send_seq=2102 receive_seq=2102 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993226 heater_bed: target=80 temp=65.5 pwm=1.000 sd_pos=10963 sysload=0.85 cputime=37.078 memavail=7290068 print_time=1675.466 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.299
Stats 796453.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15752 bytes_read=204424 bytes_retransmit=9 bytes_invalid=0 send_seq=2105 receive_seq=2105 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993276 heater_bed: target=80 temp=65.7 pwm=1.000 sd_pos=10963 sysload=0.78 cputime=37.107 memavail=7290068 print_time=1676.467 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.345
Stats 796454.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15806 bytes_read=204556 bytes_retransmit=9 bytes_invalid=0 send_seq=2109 receive_seq=2109 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993267 heater_bed: target=80 temp=65.9 pwm=1.000 sd_pos=10963 sysload=0.78 cputime=37.131 memavail=7290068 print_time=1677.468 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.357
Stats 796455.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15860 bytes_read=204689 bytes_retransmit=9 bytes_invalid=0 send_seq=2113 receive_seq=2113 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993257 heater_bed: target=80 temp=66.2 pwm=1.000 sd_pos=10963 sysload=0.78 cputime=37.160 memavail=7290068 print_time=1678.468 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.267
Stats 796456.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15882 bytes_read=204811 bytes_retransmit=9 bytes_invalid=0 send_seq=2115 receive_seq=2115 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993248 heater_bed: target=80 temp=66.5 pwm=1.000 sd_pos=10963 sysload=0.78 cputime=37.187 memavail=7290068 print_time=1679.469 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.204
Stats 796457.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15936 bytes_read=204929 bytes_retransmit=9 bytes_invalid=0 send_seq=2119 receive_seq=2119 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993242 heater_bed: target=80 temp=66.7 pwm=1.000 sd_pos=10963 sysload=0.78 cputime=37.212 memavail=7289844 print_time=1680.469 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.223
Stats 796458.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15974 bytes_read=205052 bytes_retransmit=9 bytes_invalid=0 send_seq=2122 receive_seq=2122 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993235 heater_bed: target=80 temp=67.0 pwm=1.000 sd_pos=10963 sysload=0.72 cputime=37.240 memavail=7289844 print_time=1681.470 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.271
Stats 796459.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=15996 bytes_read=205180 bytes_retransmit=9 bytes_invalid=0 send_seq=2124 receive_seq=2124 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993233 heater_bed: target=80 temp=67.2 pwm=1.000 sd_pos=10963 sysload=0.72 cputime=37.263 memavail=7289620 print_time=1682.470 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.241
Stats 796460.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16029 bytes_read=205284 bytes_retransmit=9 bytes_invalid=0 send_seq=2126 receive_seq=2126 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993227 heater_bed: target=80 temp=67.4 pwm=1.000 sd_pos=10963 sysload=0.72 cputime=37.285 memavail=7289620 print_time=1683.471 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.321
Stats 796461.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16083 bytes_read=205417 bytes_retransmit=9 bytes_invalid=0 send_seq=2130 receive_seq=2130 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993222 heater_bed: target=80 temp=67.7 pwm=1.000 sd_pos=10963 sysload=0.72 cputime=37.314 memavail=7289620 print_time=1684.472 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.164
Stats 796462.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16120 bytes_read=205544 bytes_retransmit=9 bytes_invalid=0 send_seq=2133 receive_seq=2133 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993250 heater_bed: target=80 temp=68.0 pwm=1.000 sd_pos=10963 sysload=0.72 cputime=37.347 memavail=7289620 print_time=1685.473 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.250
Stats 796463.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16185 bytes_read=205662 bytes_retransmit=9 bytes_invalid=0 send_seq=2137 receive_seq=2137 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993243 heater_bed: target=80 temp=68.2 pwm=1.000 sd_pos=10963 sysload=0.74 cputime=37.375 memavail=7289620 print_time=1686.474 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.230
Stats 796464.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16223 bytes_read=205804 bytes_retransmit=9 bytes_invalid=0 send_seq=2140 receive_seq=2140 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993233 heater_bed: target=80 temp=68.5 pwm=1.000 sd_pos=10963 sysload=0.74 cputime=37.411 memavail=7289620 print_time=1687.475 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.287
Stats 796465.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16245 bytes_read=205926 bytes_retransmit=9 bytes_invalid=0 send_seq=2142 receive_seq=2142 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993228 heater_bed: target=80 temp=68.7 pwm=1.000 sd_pos=10963 sysload=0.74 cputime=37.442 memavail=7289624 print_time=1688.477 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.216
Stats 796466.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16299 bytes_read=206044 bytes_retransmit=9 bytes_invalid=0 send_seq=2146 receive_seq=2146 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993257 heater_bed: target=80 temp=68.9 pwm=1.000 sd_pos=10963 sysload=0.74 cputime=37.474 memavail=7289624 print_time=1689.477 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.237
Stats 796467.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16348 bytes_read=206172 bytes_retransmit=9 bytes_invalid=0 send_seq=2149 receive_seq=2149 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993249 heater_bed: target=80 temp=69.2 pwm=1.000 sd_pos=10963 sysload=0.74 cputime=37.508 memavail=7289624 print_time=1690.478 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.267
Stats 796468.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16386 bytes_read=206299 bytes_retransmit=9 bytes_invalid=0 send_seq=2152 receive_seq=2152 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993243 heater_bed: target=80 temp=69.4 pwm=1.000 sd_pos=10963 sysload=0.68 cputime=37.538 memavail=7289624 print_time=1691.479 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.283
Stats 796469.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16424 bytes_read=206426 bytes_retransmit=9 bytes_invalid=0 send_seq=2155 receive_seq=2155 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993237 heater_bed: target=80 temp=69.6 pwm=1.000 sd_pos=10963 sysload=0.68 cputime=37.565 memavail=7289624 print_time=1692.481 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.242
Stats 796470.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16462 bytes_read=206554 bytes_retransmit=9 bytes_invalid=0 send_seq=2158 receive_seq=2158 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993233 heater_bed: target=80 temp=69.9 pwm=1.000 sd_pos=10963 sysload=0.68 cputime=37.591 memavail=7289624 print_time=1693.481 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.327
Stats 796471.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16484 bytes_read=206676 bytes_retransmit=9 bytes_invalid=0 send_seq=2160 receive_seq=2160 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993227 heater_bed: target=80 temp=70.1 pwm=1.000 sd_pos=10963 sysload=0.68 cputime=37.615 memavail=7289624 print_time=1694.482 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.232
Stats 796472.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16522 bytes_read=206789 bytes_retransmit=9 bytes_invalid=0 send_seq=2163 receive_seq=2163 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993222 heater_bed: target=80 temp=70.2 pwm=1.000 sd_pos=10963 sysload=0.68 cputime=37.642 memavail=7289624 print_time=1695.483 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.366
Stats 796473.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16559 bytes_read=206917 bytes_retransmit=9 bytes_invalid=0 send_seq=2166 receive_seq=2166 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993215 heater_bed: target=80 temp=70.6 pwm=1.000 sd_pos=10963 sysload=0.62 cputime=37.670 memavail=7289624 print_time=1696.484 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.178
Stats 796474.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16639 bytes_read=207068 bytes_retransmit=9 bytes_invalid=0 send_seq=2171 receive_seq=2171 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993212 heater_bed: target=80 temp=70.8 pwm=1.000 sd_pos=10963 sysload=0.62 cputime=37.696 memavail=7289564 print_time=1697.485 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.282
Stats 796475.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16693 bytes_read=207186 bytes_retransmit=9 bytes_invalid=0 send_seq=2175 receive_seq=2175 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993263 heater_bed: target=80 temp=71.0 pwm=1.000 sd_pos=10963 sysload=0.62 cputime=37.724 memavail=7289632 print_time=1698.487 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.369
Stats 796476.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16731 bytes_read=207314 bytes_retransmit=9 bytes_invalid=0 send_seq=2178 receive_seq=2178 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993255 heater_bed: target=80 temp=71.3 pwm=1.000 sd_pos=10963 sysload=0.62 cputime=37.758 memavail=7289632 print_time=1699.488 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.299
Stats 796477.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16785 bytes_read=207446 bytes_retransmit=9 bytes_invalid=0 send_seq=2182 receive_seq=2182 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993252 heater_bed: target=80 temp=71.4 pwm=1.000 sd_pos=10963 sysload=0.62 cputime=37.788 memavail=7289632 print_time=1700.490 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.299
Stats 796478.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16860 bytes_read=207585 bytes_retransmit=9 bytes_invalid=0 send_seq=2188 receive_seq=2188 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993243 heater_bed: target=80 temp=71.7 pwm=1.000 sd_pos=10963 sysload=0.81 cputime=37.815 memavail=7289632 print_time=1701.491 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.358
Stats 796479.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16898 bytes_read=207727 bytes_retransmit=9 bytes_invalid=0 send_seq=2191 receive_seq=2191 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993236 heater_bed: target=80 temp=71.9 pwm=1.000 sd_pos=10963 sysload=0.81 cputime=37.842 memavail=7289632 print_time=1702.492 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.6 pwm=0.440
Stats 796480.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16947 bytes_read=207854 bytes_retransmit=9 bytes_invalid=0 send_seq=2194 receive_seq=2194 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993230 heater_bed: target=80 temp=72.2 pwm=1.000 sd_pos=10963 sysload=0.81 cputime=37.869 memavail=7289632 print_time=1703.493 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.270
Stats 796481.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=16985 bytes_read=207967 bytes_retransmit=9 bytes_invalid=0 send_seq=2197 receive_seq=2197 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993228 heater_bed: target=80 temp=72.3 pwm=1.000 sd_pos=10963 sysload=0.81 cputime=37.895 memavail=7289632 print_time=1704.493 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.296
Stats 796482.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17055 bytes_read=208105 bytes_retransmit=9 bytes_invalid=0 send_seq=2202 receive_seq=2202 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993223 heater_bed: target=80 temp=72.6 pwm=1.000 sd_pos=10963 sysload=0.81 cputime=37.921 memavail=7289632 print_time=1705.493 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.163
Stats 796483.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17077 bytes_read=208227 bytes_retransmit=9 bytes_invalid=0 send_seq=2204 receive_seq=2204 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993271 heater_bed: target=80 temp=72.8 pwm=1.000 sd_pos=10963 sysload=0.75 cputime=37.944 memavail=7289632 print_time=1706.494 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.249
Stats 796484.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17099 bytes_read=208349 bytes_retransmit=9 bytes_invalid=0 send_seq=2206 receive_seq=2206 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993262 heater_bed: target=80 temp=73.0 pwm=1.000 sd_pos=10963 sysload=0.75 cputime=37.965 memavail=7286860 print_time=1707.495 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.176
Stats 796485.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17153 bytes_read=208482 bytes_retransmit=9 bytes_invalid=0 send_seq=2210 receive_seq=2210 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993250 heater_bed: target=80 temp=73.3 pwm=0.930 sd_pos=10963 sysload=0.75 cputime=38.004 memavail=7291228 print_time=1708.495 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.361
Stats 796486.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17207 bytes_read=208614 bytes_retransmit=9 bytes_invalid=0 send_seq=2214 receive_seq=2214 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993238 heater_bed: target=80 temp=73.5 pwm=0.989 sd_pos=10963 sysload=0.75 cputime=38.030 memavail=7291228 print_time=1709.496 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.371
Stats 796487.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17240 bytes_read=208722 bytes_retransmit=9 bytes_invalid=0 send_seq=2216 receive_seq=2216 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=73.7 pwm=0.939 sd_pos=10963 sysload=0.75 cputime=38.053 memavail=7291228 print_time=1710.496 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.274
Stats 796488.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=17310 bytes_read=208860 bytes_retransmit=9 bytes_invalid=0 send_seq=2221 receive_seq=2221 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=73.9 pwm=0.952 sd_pos=10963 sysload=0.69 cputime=38.087 memavail=7291232 print_time=1711.497 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.266
Stats 796489.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17428 bytes_read=209026 bytes_retransmit=9 bytes_invalid=0 send_seq=2229 receive_seq=2229 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993220 heater_bed: target=80 temp=74.1 pwm=0.812 sd_pos=10963 sysload=0.69 cputime=38.122 memavail=7291232 print_time=1712.497 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.142
Stats 796490.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17498 bytes_read=209149 bytes_retransmit=9 bytes_invalid=0 send_seq=2234 receive_seq=2234 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993214 heater_bed: target=80 temp=74.3 pwm=0.912 sd_pos=10963 sysload=0.69 cputime=38.143 memavail=7291008 print_time=1713.498 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.191
Stats 796491.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17536 bytes_read=209277 bytes_retransmit=9 bytes_invalid=0 send_seq=2237 receive_seq=2237 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993205 heater_bed: target=80 temp=74.6 pwm=0.820 sd_pos=10963 sysload=0.69 cputime=38.171 memavail=7291008 print_time=1714.498 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.274
Stats 796492.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17622 bytes_read=209419 bytes_retransmit=9 bytes_invalid=0 send_seq=2243 receive_seq=2243 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993259 heater_bed: target=80 temp=74.7 pwm=0.884 sd_pos=10963 sysload=0.69 cputime=38.200 memavail=7291008 print_time=1715.499 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.412
Stats 796493.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17671 bytes_read=209532 bytes_retransmit=9 bytes_invalid=0 send_seq=2246 receive_seq=2246 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993249 heater_bed: target=80 temp=74.9 pwm=0.811 sd_pos=10963 sysload=0.63 cputime=38.223 memavail=7291008 print_time=1716.500 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.263
Stats 796494.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17757 bytes_read=209681 bytes_retransmit=9 bytes_invalid=0 send_seq=2252 receive_seq=2252 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993239 heater_bed: target=80 temp=75.2 pwm=0.789 sd_pos=10963 sysload=0.63 cputime=38.247 memavail=7290756 print_time=1717.500 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.245
Heater heater_bed within range of 80.000
Stats 796495.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17827 bytes_read=209810 bytes_retransmit=9 bytes_invalid=0 send_seq=2257 receive_seq=2257 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993233 heater_bed: target=80 temp=75.3 pwm=0.813 sd_pos=10963 sysload=0.63 cputime=38.269 memavail=7290756 print_time=1718.501 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.194
Stats 796496.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17865 bytes_read=209921 bytes_retransmit=9 bytes_invalid=0 send_seq=2260 receive_seq=2260 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=75.5 pwm=0.676 sd_pos=10963 sysload=0.63 cputime=38.296 memavail=7290756 print_time=1719.501 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.260
Stats 796497.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17914 bytes_read=210049 bytes_retransmit=9 bytes_invalid=0 send_seq=2263 receive_seq=2263 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993227 heater_bed: target=80 temp=75.7 pwm=0.793 sd_pos=10963 sysload=0.63 cputime=38.322 memavail=7290756 print_time=1720.502 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.181
Stats 796498.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17984 bytes_read=210186 bytes_retransmit=9 bytes_invalid=0 send_seq=2268 receive_seq=2268 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993221 heater_bed: target=80 temp=75.8 pwm=0.886 sd_pos=10963 sysload=0.58 cputime=38.344 memavail=7290756 print_time=1721.502 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.232
Stats 796499.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18054 bytes_read=210323 bytes_retransmit=9 bytes_invalid=0 send_seq=2273 receive_seq=2273 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993212 heater_bed: target=80 temp=76.0 pwm=0.714 sd_pos=10963 sysload=0.58 cputime=38.366 memavail=7290756 print_time=1722.503 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.243
Stats 796500.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18124 bytes_read=210461 bytes_retransmit=9 bytes_invalid=0 send_seq=2278 receive_seq=2278 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993209 heater_bed: target=80 temp=76.2 pwm=0.801 sd_pos=10963 sysload=0.58 cputime=38.387 memavail=7290756 print_time=1723.504 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.148
Stats 796501.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18173 bytes_read=210588 bytes_retransmit=9 bytes_invalid=0 send_seq=2281 receive_seq=2281 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993251 heater_bed: target=80 temp=76.4 pwm=0.801 sd_pos=10963 sysload=0.58 cputime=38.411 memavail=7290756 print_time=1724.505 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.330
Stats 796502.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18227 bytes_read=210706 bytes_retransmit=9 bytes_invalid=0 send_seq=2285 receive_seq=2285 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993242 heater_bed: target=80 temp=76.5 pwm=0.801 sd_pos=10963 sysload=0.58 cputime=38.439 memavail=7290756 print_time=1725.506 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.384
Stats 796503.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18297 bytes_read=210844 bytes_retransmit=9 bytes_invalid=0 send_seq=2290 receive_seq=2290 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993234 heater_bed: target=80 temp=76.7 pwm=0.828 sd_pos=10963 sysload=0.62 cputime=38.462 memavail=7290756 print_time=1726.507 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.174
Stats 796504.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=18346 bytes_read=210985 bytes_retransmit=9 bytes_invalid=0 send_seq=2293 receive_seq=2293 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993230 heater_bed: target=80 temp=76.8 pwm=0.730 sd_pos=10963 sysload=0.62 cputime=38.490 memavail=7289748 print_time=1727.508 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.174
Stats 796505.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=18400 bytes_read=211103 bytes_retransmit=9 bytes_invalid=0 send_seq=2297 receive_seq=2297 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993224 heater_bed: target=80 temp=77.0 pwm=0.762 sd_pos=10963 sysload=0.62 cputime=38.512 memavail=7289752 print_time=1728.508 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.226
Stats 796506.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=18454 bytes_read=211236 bytes_retransmit=9 bytes_invalid=0 send_seq=2301 receive_seq=2301 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993220 heater_bed: target=80 temp=77.1 pwm=0.681 sd_pos=10963 sysload=0.62 cputime=38.538 memavail=7289752 print_time=1729.509 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.156
Stats 796507.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=18556 bytes_read=211383 bytes_retransmit=9 bytes_invalid=0 send_seq=2308 receive_seq=2308 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993214 heater_bed: target=80 temp=77.3 pwm=0.620 sd_pos=10963 sysload=0.62 cputime=38.567 memavail=7289752 print_time=1730.509 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.276
Stats 796508.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000007 bytes_write=18610 bytes_read=211501 bytes_retransmit=9 bytes_invalid=0 send_seq=2312 receive_seq=2312 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993205 heater_bed: target=80 temp=77.4 pwm=0.627 sd_pos=10963 sysload=0.57 cputime=38.591 memavail=7289752 print_time=1731.510 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.345
Stats 796509.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18696 bytes_read=211658 bytes_retransmit=9 bytes_invalid=0 send_seq=2318 receive_seq=2318 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993200 heater_bed: target=80 temp=77.6 pwm=0.690 sd_pos=10963 sysload=0.57 cputime=38.619 memavail=7289752 print_time=1732.511 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.170
Stats 796510.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18750 bytes_read=211790 bytes_retransmit=9 bytes_invalid=0 send_seq=2322 receive_seq=2322 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993230 heater_bed: target=80 temp=77.7 pwm=0.690 sd_pos=10963 sysload=0.57 cputime=38.652 memavail=7289752 print_time=1733.512 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.216
Stats 796511.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18788 bytes_read=211903 bytes_retransmit=9 bytes_invalid=0 send_seq=2325 receive_seq=2325 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993224 heater_bed: target=80 temp=77.8 pwm=0.552 sd_pos=10963 sysload=0.57 cputime=38.675 memavail=7289752 print_time=1734.512 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.275
Stats 796512.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18901 bytes_read=212051 bytes_retransmit=9 bytes_invalid=0 send_seq=2332 receive_seq=2332 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993218 heater_bed: target=80 temp=77.9 pwm=0.684 sd_pos=10963 sysload=0.57 cputime=38.700 memavail=7289752 print_time=1735.513 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.237
Stats 796513.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18955 bytes_read=212183 bytes_retransmit=9 bytes_invalid=0 send_seq=2336 receive_seq=2336 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993215 heater_bed: target=80 temp=78.0 pwm=0.684 sd_pos=10963 sysload=0.52 cputime=38.733 memavail=7289752 print_time=1736.513 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.295
Stats 796514.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19025 bytes_read=212320 bytes_retransmit=9 bytes_invalid=0 send_seq=2341 receive_seq=2341 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993211 heater_bed: target=80 temp=78.1 pwm=0.629 sd_pos=10963 sysload=0.52 cputime=38.763 memavail=7289752 print_time=1737.514 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.212
Stats 796515.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19095 bytes_read=212458 bytes_retransmit=9 bytes_invalid=0 send_seq=2346 receive_seq=2346 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993206 heater_bed: target=80 temp=78.3 pwm=0.627 sd_pos=10963 sysload=0.52 cputime=38.785 memavail=7289760 print_time=1738.515 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.320
Stats 796516.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19149 bytes_read=212590 bytes_retransmit=9 bytes_invalid=0 send_seq=2350 receive_seq=2350 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993201 heater_bed: target=80 temp=78.4 pwm=0.571 sd_pos=10963 sysload=0.52 cputime=38.806 memavail=7289760 print_time=1739.517 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.317
Stats 796517.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19187 bytes_read=212703 bytes_retransmit=9 bytes_invalid=0 send_seq=2353 receive_seq=2353 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993194 heater_bed: target=80 temp=78.5 pwm=0.631 sd_pos=10963 sysload=0.52 cputime=38.827 memavail=7289312 print_time=1740.516 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.207
Stats 796518.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=19225 bytes_read=212831 bytes_retransmit=9 bytes_invalid=0 send_seq=2356 receive_seq=2356 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993192 heater_bed: target=80 temp=78.6 pwm=0.631 sd_pos=10963 sysload=0.56 cputime=38.853 memavail=7289312 print_time=1741.517 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.260
Stats 796519.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19274 bytes_read=212972 bytes_retransmit=9 bytes_invalid=0 send_seq=2359 receive_seq=2359 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993251 heater_bed: target=80 temp=78.7 pwm=0.631 sd_pos=10963 sysload=0.56 cputime=38.886 memavail=7289312 print_time=1742.518 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.180
Stats 796520.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19328 bytes_read=213090 bytes_retransmit=9 bytes_invalid=0 send_seq=2363 receive_seq=2363 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993243 heater_bed: target=80 temp=78.7 pwm=0.658 sd_pos=10963 sysload=0.56 cputime=38.911 memavail=7289088 print_time=1743.518 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.260
Stats 796521.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19382 bytes_read=213223 bytes_retransmit=9 bytes_invalid=0 send_seq=2367 receive_seq=2367 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993235 heater_bed: target=80 temp=78.9 pwm=0.591 sd_pos=10963 sysload=0.56 cputime=38.934 memavail=7289088 print_time=1744.519 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.355
Stats 796522.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19404 bytes_read=213345 bytes_retransmit=9 bytes_invalid=0 send_seq=2369 receive_seq=2369 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=79.0 pwm=0.591 sd_pos=10963 sysload=0.56 cputime=38.955 memavail=7289088 print_time=1745.520 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.239
Stats 796523.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19458 bytes_read=213463 bytes_retransmit=9 bytes_invalid=0 send_seq=2373 receive_seq=2373 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993245 heater_bed: target=80 temp=79.0 pwm=0.591 sd_pos=10963 sysload=0.52 cputime=38.985 memavail=7289088 print_time=1746.521 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.272
Stats 796524.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=19512 bytes_read=213596 bytes_retransmit=9 bytes_invalid=0 send_seq=2377 receive_seq=2377 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993238 heater_bed: target=80 temp=79.1 pwm=0.591 sd_pos=10963 sysload=0.52 cputime=39.015 memavail=7289092 print_time=1747.522 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.204
TMC 'extruder' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z1' reports GSTAT:      00000001 reset=1(Reset)
TMC 'extruder' reports GSTAT:      00000000
TMC 'stepper_z' reports GSTAT:      00000000
TMC 'stepper_z1' reports GSTAT:      00000000
TMC 'stepper_x' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_x' reports GSTAT:      00000000
Stats 796525.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=21815 bytes_read=215528 bytes_retransmit=9 bytes_invalid=0 send_seq=2487 receive_seq=2487 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993225 heater_bed: target=80 temp=79.2 pwm=0.631 sd_pos=10963 sysload=0.52 cputime=39.216 memavail=7289092 print_time=1749.351 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.321
Stats 796526.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=22285 bytes_read=216044 bytes_retransmit=9 bytes_invalid=0 send_seq=2521 receive_seq=2521 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993217 heater_bed: target=80 temp=79.3 pwm=0.536 sd_pos=10963 sysload=0.52 cputime=39.283 memavail=7289092 print_time=1750.351 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.352
TMC 'stepper_y' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 796527.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=23493 bytes_read=217320 bytes_retransmit=9 bytes_invalid=0 send_seq=2596 receive_seq=2596 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993211 heater_bed: target=80 temp=79.4 pwm=0.598 sd_pos=10963 sysload=0.52 cputime=39.429 memavail=7289092 print_time=1751.356 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.152
Stats 796528.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=24627 bytes_read=218128 bytes_retransmit=9 bytes_invalid=0 send_seq=2649 receive_seq=2649 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993202 heater_bed: target=80 temp=79.5 pwm=0.442 sd_pos=10963 sysload=0.47 cputime=39.536 memavail=7289092 print_time=1753.085 buffer_time=0.935 print_stall=0 extruder: target=250 temp=250.4 pwm=0.100
Stats 796529.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=24840 bytes_read=218475 bytes_retransmit=9 bytes_invalid=0 send_seq=2663 receive_seq=2663 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=119993193 heater_bed: target=80 temp=79.6 pwm=0.310 sd_pos=10963 sysload=0.47 cputime=39.603 memavail=7289092 print_time=1753.085 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.300
Stats 796530.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=25251 bytes_read=219024 bytes_retransmit=9 bytes_invalid=0 send_seq=2690 receive_seq=2690 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=119993185 heater_bed: target=80 temp=79.7 pwm=0.471 sd_pos=10963 sysload=0.47 cputime=39.678 memavail=7289092 print_time=1755.022 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.240
Stats 796531.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=25778 bytes_read=219459 bytes_retransmit=9 bytes_invalid=0 send_seq=2715 receive_seq=2715 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993184 heater_bed: target=80 temp=79.7 pwm=0.559 sd_pos=10963 sysload=0.47 cputime=39.743 memavail=7289092 print_time=1755.322 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.214
Stats 796532.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=26869 bytes_read=220173 bytes_retransmit=9 bytes_invalid=0 send_seq=2763 receive_seq=2763 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993235 heater_bed: target=80 temp=79.7 pwm=0.553 sd_pos=10963 sysload=0.47 cputime=39.830 memavail=7289092 print_time=1756.699 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.350
Stats 796533.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=27526 bytes_read=220686 bytes_retransmit=9 bytes_invalid=0 send_seq=2793 receive_seq=2793 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=79.8 pwm=0.545 sd_pos=10963 sysload=0.44 cputime=39.901 memavail=7289092 print_time=1757.349 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.310
Stats 796534.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=27942 bytes_read=221234 bytes_retransmit=9 bytes_invalid=0 send_seq=2821 receive_seq=2821 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993217 heater_bed: target=80 temp=79.8 pwm=0.652 sd_pos=10963 sysload=0.44 cputime=39.971 memavail=7288780 print_time=1757.491 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.250
Stats 796535.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=29217 bytes_read=221828 bytes_retransmit=9 bytes_invalid=0 send_seq=2858 receive_seq=2858 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993217 heater_bed: target=80 temp=79.8 pwm=0.576 sd_pos=10963 sysload=0.44 cputime=40.041 memavail=7288844 print_time=1760.137 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.250
Stats 796536.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=29668 bytes_read=222235 bytes_retransmit=9 bytes_invalid=0 send_seq=2878 receive_seq=2878 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993213 heater_bed: target=80 temp=79.9 pwm=0.532 sd_pos=10963 sysload=0.44 cputime=40.092 memavail=7288844 print_time=1760.337 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.3 pwm=0.160
probe at 5.000,110.000 is z=1.677500
Stats 796537.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=31081 bytes_read=222968 bytes_retransmit=9 bytes_invalid=0 send_seq=2930 receive_seq=2929 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993206 heater_bed: target=80 temp=79.9 pwm=0.532 sd_pos=10963 sysload=0.44 cputime=40.177 memavail=7288844 print_time=1762.115 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.427
Stats 796538.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=31500 bytes_read=223360 bytes_retransmit=9 bytes_invalid=0 send_seq=2950 receive_seq=2949 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993198 heater_bed: target=80 temp=80.0 pwm=0.522 sd_pos=10963 sysload=0.56 cputime=40.231 memavail=7288844 print_time=1762.365 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.5 pwm=0.448
probe at 215.000,110.000 is z=1.603750
Calculating bed tilt with: [[5.000000000040643, 110.0000000000091, 1.6775000000001525], [214.9999999999136, 110.0000000000091, 1.6037500000003169]]
Coordinate descent initial error: 0.0266453124998852
Coordinate descent best_err: 1.3332819678708675e-11  rounds: 238
Calculated bed tilt parameters: {'x_adjust': -0.0003511806882632747, 'y_adjust': 0.0006327775165394042, 'z_adjust': 1.6096517174708915}
Making the following Z adjustments:
stepper_z = -0.045103
stepper_z1 = -0.161695
Retries: 0/10 Probed points range: 0.073750 tolerance: 0.020000
Stats 796539.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=33087 bytes_read=224142 bytes_retransmit=9 bytes_invalid=0 send_seq=3004 receive_seq=3004 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993192 heater_bed: target=80 temp=80.0 pwm=0.542 sd_pos=10963 sysload=0.56 cputime=40.348 memavail=7288844 print_time=1764.214 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.306
Stats 796540.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=33507 bytes_read=224556 bytes_retransmit=9 bytes_invalid=0 send_seq=3026 receive_seq=3026 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993183 heater_bed: target=80 temp=80.0 pwm=0.600 sd_pos=10963 sysload=0.56 cputime=40.394 memavail=7288844 print_time=1764.364 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.170
probe at 5.000,110.000 is z=1.751695
Stats 796541.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=34952 bytes_read=225303 bytes_retransmit=9 bytes_invalid=0 send_seq=3077 receive_seq=3077 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993176 heater_bed: target=80 temp=80.1 pwm=0.498 sd_pos=10963 sysload=0.56 cputime=40.473 memavail=7288844 print_time=1766.193 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.4 pwm=0.023
Stats 796542.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=35345 bytes_read=225705 bytes_retransmit=9 bytes_invalid=0 send_seq=3096 receive_seq=3096 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993177 heater_bed: target=80 temp=80.1 pwm=0.489 sd_pos=10963 sysload=0.56 cputime=40.527 memavail=7288844 print_time=1766.343 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.1 pwm=0.308
probe at 215.000,110.000 is z=1.755445
Calculating bed tilt with: [[5.000000000040615, 110.0000000000091, 1.7516952925816343], [214.99999999991357, 110.0000000000091, 1.7554452925817872]]
Coordinate descent initial error: 3.2525228238610463e-05
Coordinate descent best_err: 7.123625348493243e-11  rounds: 182
Calculated bed tilt parameters: {'x_adjust': 1.7814481853526927e-05, 'y_adjust': -6.0255312799466164e-05, 'z_adjust': 1.7582348402497834}
Making the following Z adjustments:
stepper_z = 0.000165
stepper_z1 = 0.006080
Retries: 1/10 Probed points range: 0.003750 tolerance: 0.020000
Stats 796543.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=36465 bytes_read=226413 bytes_retransmit=9 bytes_invalid=0 send_seq=3142 receive_seq=3142 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=119993170 heater_bed: target=80 temp=80.2 pwm=0.389 sd_pos=10963 sysload=0.52 cputime=40.611 memavail=7288844 print_time=1767.548 buffer_time=0.387 print_stall=0 extruder: target=250 temp=250.0 pwm=0.321
Stats 796544.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=36673 bytes_read=226756 bytes_retransmit=9 bytes_invalid=0 send_seq=3155 receive_seq=3155 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993218 heater_bed: target=80 temp=80.2 pwm=0.474 sd_pos=10963 sysload=0.52 cputime=40.658 memavail=7288596 print_time=1767.548 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.0 pwm=0.279
Algorithm: lagrange.
Default probe count: 7,5.
Adapted probe count: 3,3.
Default mesh bounds: (27.0, 5.0), (240.0, 200.0).
Mesh margin is 0, margin not increased.
Fuzz amount is 0, mesh points not fuzzed.
Adapted mesh bounds: (107.011, 80.792), (137.989, 129.208).
KAMP adjustments successful. Happy KAMPing!
Generating new points...
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (80.0, 85.8)    | (107.0, 80.8)
  1   | (95.5, 85.8)    | (122.5, 80.8)
  2   | (111.0, 85.8)   | (138.0, 80.8)
  3   | (111.0, 110.0)  | (138.0, 105.0)
  4   | (95.5, 110.0)   | (122.5, 105.0)
  5   | (80.0, 110.0)   | (107.0, 105.0)
  6   | (80.0, 134.2)   | (107.0, 129.2)
  7   | (95.5, 134.2)   | (122.5, 129.2)
  8   | (111.0, 134.2)  | (138.0, 129.2)
Updated Mesh Configuration:
relative_reference_index: None
x_count: 3
y_count: 3
mesh_x_pps: 2
mesh_y_pps: 2
algo: lagrange
tension: 0.2
Stats 796545.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=37511 bytes_read=227348 bytes_retransmit=9 bytes_invalid=0 send_seq=3186 receive_seq=3186 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=26 freq=119993212 heater_bed: target=80 temp=80.3 pwm=0.482 sd_pos=10963 sysload=0.52 cputime=40.773 memavail=7288600 print_time=1770.215 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.7 pwm=0.332
Stats 796546.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=37921 bytes_read=227721 bytes_retransmit=9 bytes_invalid=0 send_seq=3205 receive_seq=3205 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993207 heater_bed: target=80 temp=80.3 pwm=0.546 sd_pos=10963 sysload=0.52 cputime=40.825 memavail=7288600 print_time=1770.365 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.3 pwm=0.420
probe at 80.013,85.788 is z=1.649835
Stats 796547.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=39159 bytes_read=228434 bytes_retransmit=9 bytes_invalid=0 send_seq=3252 receive_seq=3252 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993210 heater_bed: target=80 temp=80.3 pwm=0.390 sd_pos=10963 sysload=0.52 cputime=40.909 memavail=7288600 print_time=1771.731 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.3 pwm=0.414
Stats 796548.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=39773 bytes_read=228966 bytes_retransmit=9 bytes_invalid=0 send_seq=3283 receive_seq=3283 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993200 heater_bed: target=80 temp=80.4 pwm=0.417 sd_pos=10963 sysload=0.47 cputime=40.968 memavail=7288600 print_time=1772.331 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.178
probe at 95.488,85.788 is z=1.708585
Stats 796549.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=40911 bytes_read=229579 bytes_retransmit=9 bytes_invalid=0 send_seq=3324 receive_seq=3324 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993240 heater_bed: target=80 temp=80.4 pwm=0.417 sd_pos=10963 sysload=0.47 cputime=41.047 memavail=7288600 print_time=1773.335 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.5 pwm=0.071
probe at 110.975,85.788 is z=1.768585
Stats 796550.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=42164 bytes_read=230327 bytes_retransmit=9 bytes_invalid=0 send_seq=3375 receive_seq=3375 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=80.4 pwm=0.472 sd_pos=10963 sysload=0.47 cputime=41.141 memavail=7288376 print_time=1774.753 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.9 pwm=0.054
Stats 796551.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=42783 bytes_read=230854 bytes_retransmit=9 bytes_invalid=0 send_seq=3405 receive_seq=3405 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993219 heater_bed: target=80 temp=80.4 pwm=0.416 sd_pos=10963 sysload=0.47 cputime=41.219 memavail=7288376 print_time=1775.353 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.382
probe at 110.975,109.988 is z=1.829835
Stats 796552.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=43997 bytes_read=231477 bytes_retransmit=9 bytes_invalid=0 send_seq=3448 receive_seq=3448 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993214 heater_bed: target=80 temp=80.4 pwm=0.491 sd_pos=10963 sysload=0.47 cputime=41.301 memavail=7288632 print_time=1776.372 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.2 pwm=0.332
probe at 95.488,109.988 is z=1.739835
Stats 796553.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=45242 bytes_read=232185 bytes_retransmit=9 bytes_invalid=0 send_seq=3494 receive_seq=3494 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993248 heater_bed: target=80 temp=80.5 pwm=0.397 sd_pos=10963 sysload=0.44 cputime=41.394 memavail=7288632 print_time=1777.713 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.4 pwm=0.557
Stats 796554.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=45894 bytes_read=232735 bytes_retransmit=9 bytes_invalid=0 send_seq=3525 receive_seq=3525 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993239 heater_bed: target=80 temp=80.5 pwm=0.546 sd_pos=10963 sysload=0.44 cputime=41.463 memavail=7289388 print_time=1778.363 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.0 pwm=0.540
probe at 80.013,109.988 is z=1.688585
Stats 796555.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=47062 bytes_read=233355 bytes_retransmit=9 bytes_invalid=0 send_seq=3568 receive_seq=3568 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993231 heater_bed: target=80 temp=80.5 pwm=0.467 sd_pos=10963 sysload=0.44 cputime=41.549 memavail=7289392 print_time=1779.363 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.8 pwm=0.200
probe at 80.013,134.187 is z=1.697335
Stats 796556.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=48301 bytes_read=234078 bytes_retransmit=9 bytes_invalid=0 send_seq=3617 receive_seq=3617 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993224 heater_bed: target=80 temp=80.5 pwm=0.400 sd_pos=10963 sysload=0.44 cputime=41.640 memavail=7289392 print_time=1780.770 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.8 pwm=0.000
Stats 796557.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=48878 bytes_read=234585 bytes_retransmit=9 bytes_invalid=0 send_seq=3643 receive_seq=3643 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993217 heater_bed: target=80 temp=80.6 pwm=0.377 sd_pos=10963 sysload=0.44 cputime=41.713 memavail=7289392 print_time=1781.370 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.8 pwm=0.067
probe at 95.488,134.187 is z=1.743585
Stats 796558.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=50031 bytes_read=235203 bytes_retransmit=9 bytes_invalid=0 send_seq=3685 receive_seq=3685 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993212 heater_bed: target=80 temp=80.6 pwm=0.429 sd_pos=10963 sysload=0.40 cputime=41.788 memavail=7289168 print_time=1782.357 buffer_time=0.000 print_stall=0 extruder: target=250 temp=250.7 pwm=0.186
probe at 110.975,134.187 is z=1.836085
Mesh Bed Leveling Complete
save_config: set [bed_mesh default] version = 1
save_config: set [bed_mesh default] points = 
  -0.100165, -0.041415, 0.018585
  -0.061415, -0.010165, 0.079835
  -0.052665, -0.006415, 0.086085
save_config: set [bed_mesh default] x_count = 3
save_config: set [bed_mesh default] y_count = 3
save_config: set [bed_mesh default] mesh_x_pps = 2
save_config: set [bed_mesh default] mesh_y_pps = 2
save_config: set [bed_mesh default] algo = lagrange
save_config: set [bed_mesh default] tension = 0.2
save_config: set [bed_mesh default] min_x = 107.01
save_config: set [bed_mesh default] max_x = 137.98000000000002
save_config: set [bed_mesh default] min_y = 80.79
save_config: set [bed_mesh default] max_y = 129.19
Bed Mesh state has been saved to profile [default]
for the current session.  The SAVE_CONFIG command will
update the printer config file and restart the printer.
Stats 796559.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=51107 bytes_read=235906 bytes_retransmit=9 bytes_invalid=0 send_seq=3730 receive_seq=3730 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=119993207 heater_bed: target=80 temp=80.6 pwm=0.305 sd_pos=10963 sysload=0.40 cputime=41.881 memavail=7289168 print_time=1783.559 buffer_time=0.388 print_stall=0 extruder: target=250 temp=250.4 pwm=0.327
Stats 796560.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=51304 bytes_read=236293 bytes_retransmit=9 bytes_invalid=0 send_seq=3743 receive_seq=3743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993201 heater_bed: target=80 temp=80.7 pwm=0.368 sd_pos=10963 sysload=0.40 cputime=41.933 memavail=7289168 print_time=1783.559 buffer_time=0.000 print_stall=0 extruder: target=250 temp=249.9 pwm=0.403
Moving filament tip 0.0mms
KAMP purge is using firmware retraction.
KAMP purge starting at 107.5, 70.792 and purging 30.0mm of filament, requested flow rate is 12.0mm/s3.
Stats 796561.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=52990 bytes_read=236906 bytes_retransmit=9 bytes_invalid=0 send_seq=3787 receive_seq=3787 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993198 heater_bed: target=80 temp=80.7 pwm=0.368 sd_pos=10963 sysload=0.40 cputime=42.025 memavail=7289168 print_time=1789.471 buffer_time=4.299 print_stall=0 extruder: target=250 temp=249.5 pwm=0.467
Stats 796562.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=53163 bytes_read=237244 bytes_retransmit=9 bytes_invalid=0 send_seq=3799 receive_seq=3799 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=80.7 pwm=0.368 sd_pos=10963 sysload=0.40 cputime=42.077 memavail=7289168 print_time=1789.471 buffer_time=3.298 print_stall=0 extruder: target=250 temp=249.7 pwm=0.310
Stats 796563.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=53357 bytes_read=237611 bytes_retransmit=9 bytes_invalid=0 send_seq=3811 receive_seq=3811 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993223 heater_bed: target=80 temp=80.7 pwm=0.449 sd_pos=10963 sysload=0.45 cputime=42.123 memavail=7289168 print_time=1789.471 buffer_time=2.297 print_stall=0 extruder: target=250 temp=250.1 pwm=0.232
Hyperlapse: frames started (Cycle 30 sec)
Pausing toolhead to calculate extruder phase offset
Stats 796564.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=54597 bytes_read=238039 bytes_retransmit=9 bytes_invalid=0 send_seq=3841 receive_seq=3841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993217 heater_bed: target=80 temp=80.7 pwm=0.333 sd_pos=10995 sysload=0.45 cputime=42.199 memavail=7288672 print_time=1798.050 buffer_time=9.876 print_stall=0 extruder: target=250 temp=250.6 pwm=0.076
Stats 796565.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=54786 bytes_read=238395 bytes_retransmit=9 bytes_invalid=0 send_seq=3854 receive_seq=3854 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993209 heater_bed: target=80 temp=80.7 pwm=0.388 sd_pos=10995 sysload=0.45 cputime=42.257 memavail=7288672 print_time=1798.050 buffer_time=8.875 print_stall=0 extruder: target=250 temp=250.3 pwm=0.291
Stats 796566.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=55023 bytes_read=238773 bytes_retransmit=9 bytes_invalid=0 send_seq=3870 receive_seq=3870 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993203 heater_bed: target=80 temp=80.8 pwm=0.270 sd_pos=10995 sysload=0.45 cputime=42.315 memavail=7288672 print_time=1798.050 buffer_time=7.875 print_stall=0 extruder: target=250 temp=250.0 pwm=0.334
Stats 796567.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=55217 bytes_read=239116 bytes_retransmit=9 bytes_invalid=0 send_seq=3884 receive_seq=3884 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993194 heater_bed: target=80 temp=80.8 pwm=0.287 sd_pos=10995 sysload=0.45 cputime=42.369 memavail=7288672 print_time=1798.050 buffer_time=6.874 print_stall=0 extruder: target=250 temp=249.7 pwm=0.413
Stats 796568.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=55427 bytes_read=239469 bytes_retransmit=9 bytes_invalid=0 send_seq=3899 receive_seq=3899 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993188 heater_bed: target=80 temp=80.8 pwm=0.373 sd_pos=10995 sysload=0.41 cputime=42.427 memavail=7288672 print_time=1798.050 buffer_time=5.873 print_stall=0 extruder: target=250 temp=249.2 pwm=0.467
Stats 796569.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=55643 bytes_read=239846 bytes_retransmit=9 bytes_invalid=0 send_seq=3913 receive_seq=3913 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993186 heater_bed: target=80 temp=80.8 pwm=0.258 sd_pos=10995 sysload=0.41 cputime=42.478 memavail=7288672 print_time=1798.050 buffer_time=4.873 print_stall=0 extruder: target=250 temp=249.3 pwm=0.369
Stats 796570.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=55864 bytes_read=240214 bytes_retransmit=9 bytes_invalid=0 send_seq=3928 receive_seq=3928 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993183 heater_bed: target=80 temp=80.8 pwm=0.330 sd_pos=10995 sysload=0.41 cputime=42.535 memavail=7288672 print_time=1798.050 buffer_time=3.872 print_stall=0 extruder: target=250 temp=249.5 pwm=0.299
Stats 796571.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=56043 bytes_read=240562 bytes_retransmit=9 bytes_invalid=0 send_seq=3939 receive_seq=3939 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993214 heater_bed: target=80 temp=80.8 pwm=0.401 sd_pos=10995 sysload=0.41 cputime=42.589 memavail=7288832 print_time=1798.050 buffer_time=2.872 print_stall=0 extruder: target=250 temp=249.7 pwm=0.314
Stats 796572.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=56290 bytes_read=240934 bytes_retransmit=9 bytes_invalid=0 send_seq=3955 receive_seq=3955 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993208 heater_bed: target=80 temp=80.8 pwm=0.438 sd_pos=10995 sysload=0.41 cputime=42.644 memavail=7292268 print_time=1798.050 buffer_time=1.871 print_stall=0 extruder: target=250 temp=249.8 pwm=0.355
Stats 796573.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000007 bytes_write=56636 bytes_read=241292 bytes_retransmit=9 bytes_invalid=0 send_seq=3971 receive_seq=3971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993201 heater_bed: target=80 temp=80.8 pwm=0.375 sd_pos=10995 sysload=0.38 cputime=42.690 memavail=7292016 print_time=1798.061 buffer_time=0.881 print_stall=0 extruder: target=250 temp=249.7 pwm=0.440
Stats 796574.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=59260 bytes_read=241878 bytes_retransmit=9 bytes_invalid=0 send_seq=4025 receive_seq=4023 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993193 heater_bed: target=80 temp=80.8 pwm=0.412 sd_pos=11530 sysload=0.38 cputime=42.756 memavail=7290812 print_time=1800.954 buffer_time=2.772 print_stall=0 extruder: target=250 temp=249.4 pwm=0.505
Stats 796575.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=59740 bytes_read=242260 bytes_retransmit=9 bytes_invalid=0 send_seq=4041 receive_seq=4041 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993186 heater_bed: target=80 temp=80.7 pwm=0.412 sd_pos=11530 sysload=0.38 cputime=42.804 memavail=7290816 print_time=1801.550 buffer_time=2.367 print_stall=0 extruder: target=250 temp=249.1 pwm=0.572
Stats 796576.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=60195 bytes_read=242628 bytes_retransmit=9 bytes_invalid=0 send_seq=4059 receive_seq=4059 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993185 heater_bed: target=80 temp=80.7 pwm=0.395 sd_pos=11589 sysload=0.38 cputime=42.855 memavail=7290816 print_time=1803.229 buffer_time=3.045 print_stall=0 extruder: target=250 temp=249.4 pwm=0.392
Stats 796577.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=60411 bytes_read=242991 bytes_retransmit=9 bytes_invalid=0 send_seq=4073 receive_seq=4073 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993178 heater_bed: target=80 temp=80.7 pwm=0.442 sd_pos=11589 sysload=0.38 cputime=42.899 memavail=7290816 print_time=1803.229 buffer_time=2.044 print_stall=0 extruder: target=250 temp=249.8 pwm=0.278
Stats 796578.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=61152 bytes_read=243383 bytes_retransmit=9 bytes_invalid=0 send_seq=4093 receive_seq=4093 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119993174 heater_bed: target=80 temp=80.7 pwm=0.442 sd_pos=11706 sysload=0.35 cputime=42.949 memavail=7290816 print_time=1804.847 buffer_time=2.662 print_stall=0 extruder: target=250 temp=250.2 pwm=0.251
Stats 796579.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=61587 bytes_read=243736 bytes_retransmit=9 bytes_invalid=0 send_seq=4108 receive_seq=4108 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993182 heater_bed: target=80 temp=80.7 pwm=0.376 sd_pos=11763 sysload=0.35 cputime=42.991 memavail=7290816 print_time=1805.297 buffer_time=2.111 print_stall=0 extruder: target=250 temp=250.3 pwm=0.251
Stats 796580.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=62154 bytes_read=244134 bytes_retransmit=9 bytes_invalid=0 send_seq=4126 receive_seq=4126 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993223 heater_bed: target=80 temp=80.7 pwm=0.457 sd_pos=11822 sysload=0.35 cputime=43.046 memavail=7290816 print_time=1807.372 buffer_time=3.185 print_stall=0 extruder: target=250 temp=249.9 pwm=0.478
Stats 796581.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=62332 bytes_read=244491 bytes_retransmit=9 bytes_invalid=0 send_seq=4139 receive_seq=4139 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993215 heater_bed: target=80 temp=80.6 pwm=0.457 sd_pos=11822 sysload=0.35 cputime=43.096 memavail=7290816 print_time=1807.372 buffer_time=2.184 print_stall=0 extruder: target=250 temp=249.8 pwm=0.491
Stats 796582.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=64675 bytes_read=245009 bytes_retransmit=9 bytes_invalid=0 send_seq=4187 receive_seq=4187 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993208 heater_bed: target=80 temp=80.6 pwm=0.457 sd_pos=12195 sysload=0.35 cputime=43.167 memavail=7290816 print_time=1808.430 buffer_time=2.243 print_stall=0 extruder: target=250 temp=249.7 pwm=0.467
Stats 796583.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=65505 bytes_read=245412 bytes_retransmit=9 bytes_invalid=0 send_seq=4209 receive_seq=4209 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119993207 heater_bed: target=80 temp=80.6 pwm=0.431 sd_pos=12254 sysload=0.32 cputime=43.223 memavail=7290816 print_time=1809.772 buffer_time=2.583 print_stall=0 extruder: target=250 temp=249.9 pwm=0.304
Stats 796584.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=66454 bytes_read=245829 bytes_retransmit=9 bytes_invalid=0 send_seq=4234 receive_seq=4234 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119993204 heater_bed: target=80 temp=80.5 pwm=0.572 sd_pos=12691 sysload=0.32 cputime=43.281 memavail=7291304 print_time=1810.578 buffer_time=2.389 print_stall=0 extruder: target=250 temp=250.3 pwm=0.166
Stats 796585.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=66878 bytes_read=246202 bytes_retransmit=9 bytes_invalid=0 send_seq=4250 receive_seq=4250 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993199 heater_bed: target=80 temp=80.5 pwm=0.462 sd_pos=13107 sysload=0.32 cputime=43.338 memavail=7291324 print_time=1811.320 buffer_time=2.130 print_stall=0 extruder: target=250 temp=250.1 pwm=0.355
Stats 796586.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=68232 bytes_read=246650 bytes_retransmit=9 bytes_invalid=0 send_seq=4281 receive_seq=4281 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993195 heater_bed: target=80 temp=80.5 pwm=0.532 sd_pos=13362 sysload=0.32 cputime=43.405 memavail=7291324 print_time=1812.434 buffer_time=2.243 print_stall=0 extruder: target=250 temp=250.0 pwm=0.376
Stats 796587.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=68747 bytes_read=247037 bytes_retransmit=9 bytes_invalid=0 send_seq=4300 receive_seq=4300 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993189 heater_bed: target=80 temp=80.5 pwm=0.448 sd_pos=13450 sysload=0.32 cputime=43.468 memavail=7291324 print_time=1813.567 buffer_time=2.377 print_stall=0 extruder: target=250 temp=250.2 pwm=0.241
Stats 796588.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=69375 bytes_read=247400 bytes_retransmit=9 bytes_invalid=0 send_seq=4317 receive_seq=4317 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993185 heater_bed: target=80 temp=80.5 pwm=0.390 sd_pos=13450 sysload=0.29 cputime=43.519 memavail=7291072 print_time=1814.203 buffer_time=2.012 print_stall=0 extruder: target=250 temp=250.4 pwm=0.241
Stats 796589.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=71856 bytes_read=247938 bytes_retransmit=9 bytes_invalid=0 send_seq=4366 receive_seq=4366 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993222 heater_bed: target=80 temp=80.5 pwm=0.390 sd_pos=13920 sysload=0.29 cputime=43.590 memavail=7291072 print_time=1815.765 buffer_time=2.572 print_stall=0 extruder: target=250 temp=250.0 pwm=0.373
Stats 796590.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=75983 bytes_read=248635 bytes_retransmit=9 bytes_invalid=0 send_seq=4444 receive_seq=4444 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119993217 heater_bed: target=80 temp=80.5 pwm=0.390 sd_pos=15426 sysload=0.29 cputime=43.681 memavail=7291072 print_time=1816.690 buffer_time=2.496 print_stall=0 extruder: target=250 temp=249.9 pwm=0.366
Stats 796591.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=78753 bytes_read=249183 bytes_retransmit=9 bytes_invalid=0 send_seq=4498 receive_seq=4498 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993210 heater_bed: target=80 temp=80.5 pwm=0.390 sd_pos=16418 sysload=0.29 cputime=43.758 memavail=7291072 print_time=1817.275 buffer_time=2.080 print_stall=0 extruder: target=250 temp=250.2 pwm=0.204
Stats 796592.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=83084 bytes_read=249871 bytes_retransmit=9 bytes_invalid=0 send_seq=4577 receive_seq=4577 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119993206 heater_bed: target=80 temp=80.5 pwm=0.253 sd_pos=16816 sysload=0.29 cputime=43.849 memavail=7291072 print_time=1818.543 buffer_time=2.347 print_stall=0 extruder: target=250 temp=250.0 pwm=0.260
Stats 796593.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=85011 bytes_read=250368 bytes_retransmit=9 bytes_invalid=0 send_seq=4618 receive_seq=4618 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993202 heater_bed: target=80 temp=80.5 pwm=0.346 sd_pos=16987 sysload=0.27 cputime=43.916 memavail=7291072 print_time=1819.379 buffer_time=2.183 print_stall=0 extruder: target=250 temp=250.2 pwm=0.247
Stats 796594.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=87037 bytes_read=250856 bytes_retransmit=9 bytes_invalid=0 send_seq=4660 receive_seq=4660 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993196 heater_bed: target=80 temp=80.5 pwm=0.304 sd_pos=17334 sysload=0.27 cputime=43.981 memavail=7291220 print_time=1820.241 buffer_time=2.043 print_stall=0 extruder: target=250 temp=250.1 pwm=0.337
Stats 796595.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=90877 bytes_read=251525 bytes_retransmit=9 bytes_invalid=0 send_seq=4732 receive_seq=4732 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119993192 heater_bed: target=80 temp=80.5 pwm=0.331 sd_pos=17763 sysload=0.27 cputime=44.050 memavail=7291296 print_time=1821.305 buffer_time=2.107 print_stall=0 extruder: target=250 temp=250.1 pwm=0.335
Stats 796596.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=92589 bytes_read=251997 bytes_retransmit=9 bytes_invalid=0 send_seq=4768 receive_seq=4768 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993185 heater_bed: target=80 temp=80.5 pwm=0.331 sd_pos=17937 sysload=0.27 cputime=44.105 memavail=7291296 print_time=1822.607 buffer_time=2.408 print_stall=0 extruder: target=250 temp=250.2 pwm=0.270
Stats 796597.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=93861 bytes_read=252425 bytes_retransmit=9 bytes_invalid=0 send_seq=4798 receive_seq=4798 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993182 heater_bed: target=80 temp=80.5 pwm=0.386 sd_pos=18053 sysload=0.27 cputime=44.154 memavail=7291296 print_time=1823.470 buffer_time=2.271 print_stall=0 extruder: target=250 temp=250.2 pwm=0.261
Stats 796598.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=95018 bytes_read=252848 bytes_retransmit=9 bytes_invalid=0 send_seq=4824 receive_seq=4824 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993216 heater_bed: target=80 temp=80.5 pwm=0.508 sd_pos=18169 sysload=0.25 cputime=44.213 memavail=7291296 print_time=1824.333 buffer_time=2.133 print_stall=0 extruder: target=250 temp=250.2 pwm=0.261
Stats 796599.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=96794 bytes_read=253305 bytes_retransmit=9 bytes_invalid=0 send_seq=4865 receive_seq=4857 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993208 heater_bed: target=80 temp=80.5 pwm=0.379 sd_pos=18343 sysload=0.25 cputime=44.276 memavail=7291296 print_time=1825.620 buffer_time=2.419 print_stall=0 extruder: target=250 temp=250.2 pwm=0.253
Stats 796600.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=98036 bytes_read=253783 bytes_retransmit=9 bytes_invalid=0 send_seq=4894 receive_seq=4894 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993199 heater_bed: target=80 temp=80.5 pwm=0.415 sd_pos=18459 sysload=0.25 cputime=44.332 memavail=7291296 print_time=1826.483 buffer_time=2.281 print_stall=0 extruder: target=250 temp=249.6 pwm=0.515
Stats 796601.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=99340 bytes_read=254236 bytes_retransmit=9 bytes_invalid=0 send_seq=4925 receive_seq=4925 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993223 heater_bed: target=80 temp=80.5 pwm=0.473 sd_pos=18575 sysload=0.25 cputime=44.386 memavail=7291296 print_time=1827.346 buffer_time=2.144 print_stall=0 extruder: target=250 temp=249.7 pwm=0.441
Stats 796602.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=100936 bytes_read=254700 bytes_retransmit=9 bytes_invalid=0 send_seq=4961 receive_seq=4961 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993216 heater_bed: target=80 temp=80.5 pwm=0.398 sd_pos=18805 sysload=0.25 cputime=44.450 memavail=7291296 print_time=1828.312 buffer_time=2.110 print_stall=0 extruder: target=250 temp=250.0 pwm=0.336
Stats 796603.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=103139 bytes_read=255205 bytes_retransmit=9 bytes_invalid=0 send_seq=5007 receive_seq=5007 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993210 heater_bed: target=80 temp=80.5 pwm=0.310 sd_pos=19102 sysload=0.23 cputime=44.513 memavail=7291296 print_time=1829.505 buffer_time=2.301 print_stall=0 extruder: target=250 temp=250.0 pwm=0.370
Stats 796604.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=106772 bytes_read=255853 bytes_retransmit=9 bytes_invalid=0 send_seq=5078 receive_seq=5078 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993207 heater_bed: target=80 temp=80.4 pwm=0.448 sd_pos=19681 sysload=0.23 cputime=44.582 memavail=7290940 print_time=1830.441 buffer_time=2.238 print_stall=0 extruder: target=250 temp=250.0 pwm=0.301
Stats 796605.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=108412 bytes_read=256330 bytes_retransmit=9 bytes_invalid=0 send_seq=5112 receive_seq=5112 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993205 heater_bed: target=80 temp=80.4 pwm=0.496 sd_pos=19854 sysload=0.23 cputime=44.651 memavail=7290776 print_time=1831.526 buffer_time=2.321 print_stall=0 extruder: target=250 temp=249.9 pwm=0.367
Stats 796606.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=109557 bytes_read=256748 bytes_retransmit=9 bytes_invalid=0 send_seq=5140 receive_seq=5140 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993220 heater_bed: target=80 temp=80.4 pwm=0.496 sd_pos=19970 sysload=0.23 cputime=44.712 memavail=7290776 print_time=1832.389 buffer_time=2.183 print_stall=0 extruder: target=250 temp=250.0 pwm=0.339
Stats 796607.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=110822 bytes_read=257191 bytes_retransmit=9 bytes_invalid=0 send_seq=5170 receive_seq=5170 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993210 heater_bed: target=80 temp=80.3 pwm=0.472 sd_pos=20094 sysload=0.23 cputime=44.764 memavail=7290776 print_time=1833.216 buffer_time=2.010 print_stall=0 extruder: target=250 temp=250.1 pwm=0.272
Stats 796608.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=113325 bytes_read=257728 bytes_retransmit=9 bytes_invalid=0 send_seq=5219 receive_seq=5219 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993200 heater_bed: target=80 temp=80.3 pwm=0.408 sd_pos=20470 sysload=0.21 cputime=44.817 memavail=7290776 print_time=1834.966 buffer_time=2.760 print_stall=0 extruder: target=250 temp=249.9 pwm=0.387
Stats 796609.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=114447 bytes_read=258151 bytes_retransmit=9 bytes_invalid=0 send_seq=5248 receive_seq=5248 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119993190 heater_bed: target=80 temp=80.3 pwm=0.487 sd_pos=20615 sysload=0.21 cputime=44.861 memavail=7290776 print_time=1836.407 buffer_time=3.200 print_stall=0 extruder: target=250 temp=250.1 pwm=0.242
Stats 796610.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=114656 bytes_read=258519 bytes_retransmit=9 bytes_invalid=0 send_seq=5260 receive_seq=5260 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993237 heater_bed: target=80 temp=80.3 pwm=0.379 sd_pos=20615 sysload=0.21 cputime=44.923 memavail=7294020 print_time=1836.407 buffer_time=2.199 print_stall=0 extruder: target=250 temp=250.1 pwm=0.280
Stats 796611.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=115604 bytes_read=258936 bytes_retransmit=9 bytes_invalid=0 send_seq=5285 receive_seq=5285 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=80.3 pwm=0.334 sd_pos=20672 sysload=0.21 cputime=44.978 memavail=7291964 print_time=1837.630 buffer_time=2.421 print_stall=0 extruder: target=250 temp=249.9 pwm=0.361
Stats 796612.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=116215 bytes_read=259314 bytes_retransmit=9 bytes_invalid=0 send_seq=5305 receive_seq=5305 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993220 heater_bed: target=80 temp=80.3 pwm=0.385 sd_pos=20701 sysload=0.21 cputime=45.024 memavail=7292948 print_time=1839.320 buffer_time=3.110 print_stall=0 extruder: target=250 temp=250.0 pwm=0.280
Stats 796613.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=116404 bytes_read=259672 bytes_retransmit=9 bytes_invalid=0 send_seq=5318 receive_seq=5318 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993210 heater_bed: target=80 temp=80.3 pwm=0.323 sd_pos=20701 sysload=0.19 cputime=45.075 memavail=7290908 print_time=1839.320 buffer_time=2.107 print_stall=0 extruder: target=250 temp=249.8 pwm=0.444
Stats 796614.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=117797 bytes_read=260144 bytes_retransmit=9 bytes_invalid=0 send_seq=5351 receive_seq=5351 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993206 heater_bed: target=80 temp=80.4 pwm=0.323 sd_pos=21017 sysload=0.19 cputime=45.135 memavail=7291988 print_time=1840.829 buffer_time=2.615 print_stall=0 extruder: target=250 temp=249.9 pwm=0.364
Stats 796615.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=118864 bytes_read=260562 bytes_retransmit=9 bytes_invalid=0 send_seq=5379 receive_seq=5379 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119993203 heater_bed: target=80 temp=80.4 pwm=0.375 sd_pos=21161 sysload=0.19 cputime=45.186 memavail=7291988 print_time=1842.375 buffer_time=3.160 print_stall=0 extruder: target=250 temp=249.8 pwm=0.350
Stats 796616.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=119091 bytes_read=260915 bytes_retransmit=9 bytes_invalid=0 send_seq=5391 receive_seq=5391 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993197 heater_bed: target=80 temp=80.4 pwm=0.375 sd_pos=21161 sysload=0.19 cputime=45.233 memavail=7291988 print_time=1842.375 buffer_time=2.159 print_stall=0 extruder: target=250 temp=250.0 pwm=0.313
Stats 796617.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=120143 bytes_read=261342 bytes_retransmit=9 bytes_invalid=0 send_seq=5418 receive_seq=5418 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993190 heater_bed: target=80 temp=80.4 pwm=0.317 sd_pos=21277 sysload=0.19 cputime=45.289 memavail=7291988 print_time=1844.086 buffer_time=2.870 print_stall=0 extruder: target=250 temp=250.1 pwm=0.313
Stats 796618.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=120725 bytes_read=261715 bytes_retransmit=9 bytes_invalid=0 send_seq=5437 receive_seq=5437 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993185 heater_bed: target=80 temp=80.4 pwm=0.331 sd_pos=21334 sysload=0.18 cputime=45.342 memavail=7291988 print_time=1845.540 buffer_time=3.323 print_stall=0 extruder: target=250 temp=250.0 pwm=0.367
Stats 796619.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=120930 bytes_read=262073 bytes_retransmit=9 bytes_invalid=0 send_seq=5450 receive_seq=5450 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993233 heater_bed: target=80 temp=80.4 pwm=0.353 sd_pos=21334 sysload=0.18 cputime=45.394 memavail=7291988 print_time=1845.540 buffer_time=2.322 print_stall=0 extruder: target=250 temp=250.1 pwm=0.245
Stats 796620.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=123269 bytes_read=262625 bytes_retransmit=9 bytes_invalid=0 send_seq=5499 receive_seq=5499 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993223 heater_bed: target=80 temp=80.4 pwm=0.301 sd_pos=21710 sysload=0.18 cputime=45.458 memavail=7291988 print_time=1847.419 buffer_time=3.201 print_stall=0 extruder: target=250 temp=250.0 pwm=0.332
Stats 796621.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=123487 bytes_read=262978 bytes_retransmit=9 bytes_invalid=0 send_seq=5514 receive_seq=5514 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993214 heater_bed: target=80 temp=80.4 pwm=0.318 sd_pos=21710 sysload=0.18 cputime=45.502 memavail=7291988 print_time=1847.419 buffer_time=2.201 print_stall=0 extruder: target=250 temp=249.9 pwm=0.384
Stats 796622.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=124225 bytes_read=263376 bytes_retransmit=9 bytes_invalid=0 send_seq=5535 receive_seq=5535 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993212 heater_bed: target=80 temp=80.4 pwm=0.357 sd_pos=21879 sysload=0.18 cputime=45.557 memavail=7291988 print_time=1848.240 buffer_time=2.021 print_stall=0 extruder: target=250 temp=249.6 pwm=0.489
Stats 796623.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=125065 bytes_read=263793 bytes_retransmit=9 bytes_invalid=0 send_seq=5560 receive_seq=5560 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119993205 heater_bed: target=80 temp=80.4 pwm=0.307 sd_pos=22269 sysload=0.16 cputime=45.621 memavail=7291988 print_time=1849.523 buffer_time=2.303 print_stall=0 extruder: target=250 temp=249.9 pwm=0.339
Stats 796624.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=126006 bytes_read=264191 bytes_retransmit=9 bytes_invalid=0 send_seq=5584 receive_seq=5584 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993199 heater_bed: target=80 temp=80.4 pwm=0.380 sd_pos=22354 sysload=0.16 cputime=45.681 memavail=7293760 print_time=1850.702 buffer_time=2.482 print_stall=0 extruder: target=250 temp=250.4 pwm=0.115
Stats 796625.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=126641 bytes_read=264604 bytes_retransmit=9 bytes_invalid=0 send_seq=5605 receive_seq=5605 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993192 heater_bed: target=80 temp=80.4 pwm=0.298 sd_pos=22464 sysload=0.16 cputime=45.739 memavail=7293724 print_time=1851.483 buffer_time=2.262 print_stall=0 extruder: target=250 temp=250.1 pwm=0.319
Stats 796626.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=127279 bytes_read=264996 bytes_retransmit=9 bytes_invalid=0 send_seq=5625 receive_seq=5625 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993189 heater_bed: target=80 temp=80.4 pwm=0.290 sd_pos=22606 sysload=0.16 cputime=45.795 memavail=7293724 print_time=1852.399 buffer_time=2.178 print_stall=0 extruder: target=250 temp=250.3 pwm=0.292
Stats 796627.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=130449 bytes_read=265579 bytes_retransmit=9 bytes_invalid=0 send_seq=5686 receive_seq=5686 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119993186 heater_bed: target=80 temp=80.4 pwm=0.357 sd_pos=22973 sysload=0.16 cputime=45.857 memavail=7293724 print_time=1853.488 buffer_time=2.266 print_stall=0 extruder: target=250 temp=250.0 pwm=0.362
Stats 796628.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=132184 bytes_read=266062 bytes_retransmit=9 bytes_invalid=0 send_seq=5724 receive_seq=5724 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993225 heater_bed: target=80 temp=80.4 pwm=0.305 sd_pos=23195 sysload=0.15 cputime=45.922 memavail=7293724 print_time=1854.225 buffer_time=2.002 print_stall=0 extruder: target=250 temp=249.9 pwm=0.372
Stats 796629.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=134564 bytes_read=266584 bytes_retransmit=9 bytes_invalid=0 send_seq=5770 receive_seq=5770 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119993217 heater_bed: target=80 temp=80.5 pwm=0.242 sd_pos=23445 sysload=0.15 cputime=45.986 memavail=7293724 print_time=1855.570 buffer_time=2.347 print_stall=0 extruder: target=250 temp=249.8 pwm=0.372
Stats 796630.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=135841 bytes_read=267032 bytes_retransmit=9 bytes_invalid=0 send_seq=5801 receive_seq=5801 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119993205 heater_bed: target=80 temp=80.5 pwm=0.253 sd_pos=23556 sysload=0.15 cputime=46.048 memavail=7293724 print_time=1856.547 buffer_time=2.324 print_stall=0 extruder: target=250 temp=250.1 pwm=0.234
Stats 796631.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=138814 bytes_read=267620 bytes_retransmit=9 bytes_invalid=0 send_seq=5860 receive_seq=5860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119993197 heater_bed: target=80 temp=80.5 pwm=0.358 sd_pos=23916 sysload=0.15 cputime=46.114 memavail=7293724 print_time=1857.618 buffer_time=2.393 print_stall=0 extruder: target=250 temp=250.3 pwm=0.203
Stats 796632.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=141067 bytes_read=268147 bytes_retransmit=9 bytes_invalid=0 send_seq=5907 receive_seq=5907 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993190 heater_bed: target=80 temp=80.5 pwm=0.339 sd_pos=24138 sysload=0.15 cputime=46.177 memavail=7293724 print_time=1858.364 buffer_time=2.139 print_stall=0 extruder: target=250 temp=250.2 pwm=0.257
Stats 796633.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=143772 bytes_read=268690 bytes_retransmit=9 bytes_invalid=0 send_seq=5960 receive_seq=5960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119993181 heater_bed: target=80 temp=80.5 pwm=0.339 sd_pos=24505 sysload=0.14 cputime=46.247 memavail=7293724 print_time=1859.474 buffer_time=2.249 print_stall=0 extruder: target=250 temp=249.9 pwm=0.415
Stats 796634.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=145537 bytes_read=269173 bytes_retransmit=9 bytes_invalid=0 send_seq=5998 receive_seq=5998 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993172 heater_bed: target=80 temp=80.5 pwm=0.330 sd_pos=24646 sysload=0.14 cputime=46.309 memavail=7292464 print_time=1860.344 buffer_time=2.118 print_stall=0 extruder: target=250 temp=250.0 pwm=0.312
Stats 796635.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=147356 bytes_read=269671 bytes_retransmit=9 bytes_invalid=0 send_seq=6036 receive_seq=6036 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993164 heater_bed: target=80 temp=80.5 pwm=0.267 sd_pos=24836 sysload=0.14 cputime=46.364 memavail=7292468 print_time=1861.503 buffer_time=2.276 print_stall=0 extruder: target=250 temp=249.9 pwm=0.364
Stats 796636.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=148688 bytes_read=270109 bytes_retransmit=9 bytes_invalid=0 send_seq=6068 receive_seq=6068 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993156 heater_bed: target=80 temp=80.5 pwm=0.327 sd_pos=24950 sysload=0.14 cputime=46.426 memavail=7292468 print_time=1862.399 buffer_time=2.172 print_stall=0 extruder: target=250 temp=250.0 pwm=0.326
Stats 796637.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=150009 bytes_read=270545 bytes_retransmit=9 bytes_invalid=0 send_seq=6098 receive_seq=6098 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993155 heater_bed: target=80 temp=80.5 pwm=0.329 sd_pos=25121 sysload=0.14 cputime=46.485 memavail=7292020 print_time=1863.352 buffer_time=2.124 print_stall=0 extruder: target=250 temp=250.1 pwm=0.326
Stats 796638.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=151327 bytes_read=270994 bytes_retransmit=9 bytes_invalid=0 send_seq=6131 receive_seq=6131 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993150 heater_bed: target=80 temp=80.4 pwm=0.469 sd_pos=25235 sysload=0.21 cputime=46.541 memavail=7292020 print_time=1864.357 buffer_time=2.128 print_stall=0 extruder: target=250 temp=250.4 pwm=0.148
Stats 796639.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=152587 bytes_read=271419 bytes_retransmit=9 bytes_invalid=0 send_seq=6161 receive_seq=6161 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993148 heater_bed: target=80 temp=80.4 pwm=0.408 sd_pos=25350 sysload=0.21 cputime=46.595 memavail=7292020 print_time=1865.465 buffer_time=2.235 print_stall=0 extruder: target=250 temp=250.3 pwm=0.254
Stats 796640.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=153944 bytes_read=271882 bytes_retransmit=9 bytes_invalid=0 send_seq=6192 receive_seq=6192 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119993148 heater_bed: target=80 temp=80.3 pwm=0.526 sd_pos=25465 sysload=0.21 cputime=46.657 memavail=7292020 print_time=1866.675 buffer_time=2.444 print_stall=0 extruder: target=250 temp=250.2 pwm=0.289
Stats 796641.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=154779 bytes_read=272294 bytes_retransmit=9 bytes_invalid=0 send_seq=6216 receive_seq=6216 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993187 heater_bed: target=80 temp=80.3 pwm=0.444 sd_pos=25522 sysload=0.21 cputime=46.718 memavail=7292020 print_time=1867.266 buffer_time=2.034 print_stall=0 extruder: target=250 temp=249.8 pwm=0.409
Stats 796642.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=156173 bytes_read=272737 bytes_retransmit=9 bytes_invalid=0 send_seq=6249 receive_seq=6249 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993179 heater_bed: target=80 temp=80.3 pwm=0.506 sd_pos=25666 sysload=0.21 cputime=46.777 memavail=7292020 print_time=1868.378 buffer_time=2.145 print_stall=0 extruder: target=250 temp=249.5 pwm=0.504
Stats 796643.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=157433 bytes_read=273175 bytes_retransmit=9 bytes_invalid=0 send_seq=6278 receive_seq=6278 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993188 heater_bed: target=80 temp=80.2 pwm=0.566 sd_pos=25782 sysload=0.19 cputime=46.834 memavail=7292020 print_time=1869.458 buffer_time=2.226 print_stall=0 extruder: target=250 temp=249.8 pwm=0.351
Stats 796644.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=158721 bytes_read=273627 bytes_retransmit=9 bytes_invalid=0 send_seq=6310 receive_seq=6310 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993185 heater_bed: target=80 temp=80.2 pwm=0.434 sd_pos=25898 sysload=0.19 cputime=46.890 memavail=7291516 print_time=1870.539 buffer_time=2.306 print_stall=0 extruder: target=250 temp=250.1 pwm=0.236
Stats 796645.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=159968 bytes_read=274075 bytes_retransmit=9 bytes_invalid=0 send_seq=6341 receive_seq=6341 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993176 heater_bed: target=80 temp=80.1 pwm=0.504 sd_pos=26014 sysload=0.19 cputime=46.944 memavail=7291520 print_time=1871.619 buffer_time=2.386 print_stall=0 extruder: target=250 temp=250.1 pwm=0.285
Stats 796646.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=161232 bytes_read=274513 bytes_retransmit=9 bytes_invalid=0 send_seq=6370 receive_seq=6370 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993175 heater_bed: target=80 temp=80.1 pwm=0.504 sd_pos=26128 sysload=0.19 cputime=47.006 memavail=7291520 print_time=1872.700 buffer_time=2.466 print_stall=0 extruder: target=250 temp=250.4 pwm=0.187
Stats 796647.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=161929 bytes_read=274905 bytes_retransmit=9 bytes_invalid=0 send_seq=6390 receive_seq=6390 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993170 heater_bed: target=80 temp=80.1 pwm=0.504 sd_pos=26186 sysload=0.19 cputime=47.066 memavail=7291520 print_time=1873.233 buffer_time=1.999 print_stall=0 extruder: target=250 temp=250.1 pwm=0.335
Stats 796648.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=164601 bytes_read=275438 bytes_retransmit=9 bytes_invalid=0 send_seq=6441 receive_seq=6441 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993164 heater_bed: target=80 temp=80.0 pwm=0.504 sd_pos=26384 sysload=0.17 cputime=47.131 memavail=7291520 print_time=1874.778 buffer_time=2.543 print_stall=0 extruder: target=250 temp=249.8 pwm=0.391
Stats 796649.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=165958 bytes_read=275891 bytes_retransmit=9 bytes_invalid=0 send_seq=6473 receive_seq=6473 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993160 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=26496 sysload=0.17 cputime=47.189 memavail=7291520 print_time=1875.533 buffer_time=2.297 print_stall=0 extruder: target=250 temp=249.8 pwm=0.388
Stats 796650.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=167151 bytes_read=276343 bytes_retransmit=9 bytes_invalid=0 send_seq=6502 receive_seq=6502 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993202 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=26608 sysload=0.17 cputime=47.259 memavail=7291520 print_time=1876.260 buffer_time=2.023 print_stall=0 extruder: target=250 temp=249.8 pwm=0.388
Stats 796651.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=168906 bytes_read=276811 bytes_retransmit=9 bytes_invalid=0 send_seq=6540 receive_seq=6540 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993200 heater_bed: target=80 temp=80.0 pwm=0.488 sd_pos=26774 sysload=0.17 cputime=47.322 memavail=7291520 print_time=1877.343 buffer_time=2.105 print_stall=0 extruder: target=250 temp=250.2 pwm=0.225
Stats 796652.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=170634 bytes_read=277289 bytes_retransmit=9 bytes_invalid=0 send_seq=6577 receive_seq=6577 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993194 heater_bed: target=80 temp=79.9 pwm=0.552 sd_pos=26942 sysload=0.17 cputime=47.380 memavail=7291520 print_time=1878.440 buffer_time=2.201 print_stall=0 extruder: target=250 temp=250.4 pwm=0.160
Stats 796653.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=172356 bytes_read=277776 bytes_retransmit=9 bytes_invalid=0 send_seq=6616 receive_seq=6616 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993191 heater_bed: target=80 temp=79.9 pwm=0.426 sd_pos=27109 sysload=0.24 cputime=47.446 memavail=7291520 print_time=1879.524 buffer_time=2.283 print_stall=0 extruder: target=250 temp=250.0 pwm=0.410
Stats 796654.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=173566 bytes_read=278194 bytes_retransmit=9 bytes_invalid=0 send_seq=6644 receive_seq=6644 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993187 heater_bed: target=80 temp=79.9 pwm=0.426 sd_pos=27220 sysload=0.24 cputime=47.508 memavail=7290912 print_time=1880.251 buffer_time=2.009 print_stall=0 extruder: target=250 temp=249.9 pwm=0.410
Stats 796655.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=175340 bytes_read=278692 bytes_retransmit=9 bytes_invalid=0 send_seq=6682 receive_seq=6682 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993179 heater_bed: target=80 temp=79.9 pwm=0.373 sd_pos=27388 sysload=0.24 cputime=47.571 memavail=7290780 print_time=1881.349 buffer_time=2.106 print_stall=0 extruder: target=250 temp=249.8 pwm=0.439
Stats 796656.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=177100 bytes_read=279184 bytes_retransmit=9 bytes_invalid=0 send_seq=6722 receive_seq=6722 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993175 heater_bed: target=80 temp=79.9 pwm=0.360 sd_pos=27555 sysload=0.24 cputime=47.630 memavail=7290780 print_time=1882.433 buffer_time=2.189 print_stall=0 extruder: target=250 temp=250.2 pwm=0.241
Stats 796657.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=179297 bytes_read=279692 bytes_retransmit=9 bytes_invalid=0 send_seq=6768 receive_seq=6768 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993171 heater_bed: target=80 temp=79.9 pwm=0.383 sd_pos=27748 sysload=0.24 cputime=47.694 memavail=7290780 print_time=1883.444 buffer_time=2.199 print_stall=0 extruder: target=250 temp=250.5 pwm=0.180
Stats 796658.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=180620 bytes_read=280145 bytes_retransmit=9 bytes_invalid=0 send_seq=6800 receive_seq=6800 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993168 heater_bed: target=80 temp=79.9 pwm=0.456 sd_pos=27860 sysload=0.22 cputime=47.748 memavail=7290780 print_time=1884.404 buffer_time=2.159 print_stall=0 extruder: target=250 temp=250.1 pwm=0.352
Stats 796659.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=181797 bytes_read=280587 bytes_retransmit=9 bytes_invalid=0 send_seq=6830 receive_seq=6830 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993200 heater_bed: target=80 temp=79.9 pwm=0.465 sd_pos=27971 sysload=0.22 cputime=47.799 memavail=7290780 print_time=1885.350 buffer_time=2.104 print_stall=0 extruder: target=250 temp=249.9 pwm=0.349
Stats 796660.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=183493 bytes_read=281060 bytes_retransmit=9 bytes_invalid=0 send_seq=6866 receive_seq=6866 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119993193 heater_bed: target=80 temp=79.9 pwm=0.465 sd_pos=28165 sysload=0.22 cputime=47.857 memavail=7290780 print_time=1886.494 buffer_time=2.248 print_stall=0 extruder: target=250 temp=249.7 pwm=0.437
Stats 796661.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=185709 bytes_read=281583 bytes_retransmit=9 bytes_invalid=0 send_seq=6912 receive_seq=6912 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993184 heater_bed: target=80 temp=79.9 pwm=0.385 sd_pos=28387 sysload=0.22 cputime=47.914 memavail=7290780 print_time=1887.306 buffer_time=2.059 print_stall=0 extruder: target=250 temp=250.2 pwm=0.198
Stats 796662.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=189624 bytes_read=282271 bytes_retransmit=9 bytes_invalid=0 send_seq=6989 receive_seq=6989 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993222 heater_bed: target=80 temp=79.9 pwm=0.415 sd_pos=28767 sysload=0.22 cputime=47.985 memavail=7290780 print_time=1888.656 buffer_time=2.408 print_stall=0 extruder: target=250 temp=249.9 pwm=0.391
Stats 796663.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=190814 bytes_read=282694 bytes_retransmit=9 bytes_invalid=0 send_seq=7018 receive_seq=7018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993225 heater_bed: target=80 temp=79.9 pwm=0.357 sd_pos=28860 sysload=0.20 cputime=48.033 memavail=7290780 print_time=1889.981 buffer_time=2.732 print_stall=0 extruder: target=250 temp=250.1 pwm=0.313
Stats 796664.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=191608 bytes_read=283097 bytes_retransmit=9 bytes_invalid=0 send_seq=7040 receive_seq=7040 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993217 heater_bed: target=80 temp=79.9 pwm=0.423 sd_pos=28917 sysload=0.20 cputime=48.082 memavail=7290780 print_time=1891.172 buffer_time=2.923 print_stall=0 extruder: target=250 temp=250.0 pwm=0.372
Stats 796665.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=192431 bytes_read=283524 bytes_retransmit=9 bytes_invalid=0 send_seq=7064 receive_seq=7064 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993213 heater_bed: target=80 temp=80.0 pwm=0.337 sd_pos=28976 sysload=0.20 cputime=48.136 memavail=7290780 print_time=1892.311 buffer_time=3.061 print_stall=0 extruder: target=250 temp=250.0 pwm=0.302
Stats 796666.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=192652 bytes_read=283877 bytes_retransmit=9 bytes_invalid=0 send_seq=7079 receive_seq=7079 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993206 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=28976 sysload=0.20 cputime=48.189 memavail=7290780 print_time=1892.311 buffer_time=2.061 print_stall=0 extruder: target=250 temp=249.7 pwm=0.409
Stats 796667.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=193468 bytes_read=284290 bytes_retransmit=9 bytes_invalid=0 send_seq=7103 receive_seq=7103 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993262 heater_bed: target=80 temp=80.0 pwm=0.264 sd_pos=29055 sysload=0.20 cputime=48.247 memavail=7290780 print_time=1893.399 buffer_time=2.147 print_stall=0 extruder: target=250 temp=250.3 pwm=0.120
Stats 796668.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=194268 bytes_read=284707 bytes_retransmit=9 bytes_invalid=0 send_seq=7128 receive_seq=7128 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993248 heater_bed: target=80 temp=80.0 pwm=0.328 sd_pos=29114 sysload=0.19 cputime=48.300 memavail=7290788 print_time=1894.435 buffer_time=2.182 print_stall=0 extruder: target=250 temp=250.0 pwm=0.313
Stats 796669.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=195080 bytes_read=285110 bytes_retransmit=9 bytes_invalid=0 send_seq=7153 receive_seq=7153 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993235 heater_bed: target=80 temp=80.1 pwm=0.278 sd_pos=29170 sysload=0.19 cputime=48.352 memavail=7290788 print_time=1895.418 buffer_time=2.166 print_stall=0 extruder: target=250 temp=250.3 pwm=0.207
Stats 796670.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=195827 bytes_read=285533 bytes_retransmit=9 bytes_invalid=0 send_seq=7176 receive_seq=7176 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993227 heater_bed: target=80 temp=80.2 pwm=0.140 sd_pos=29229 sysload=0.19 cputime=48.406 memavail=7290788 print_time=1896.350 buffer_time=2.097 print_stall=0 extruder: target=250 temp=249.6 pwm=0.518
Stats 796671.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=197098 bytes_read=285980 bytes_retransmit=9 bytes_invalid=0 send_seq=7207 receive_seq=7207 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993257 heater_bed: target=80 temp=80.2 pwm=0.232 sd_pos=29345 sysload=0.19 cputime=48.471 memavail=7290788 print_time=1898.058 buffer_time=2.805 print_stall=0 extruder: target=250 temp=249.8 pwm=0.344
Stats 796672.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=197828 bytes_read=286358 bytes_retransmit=9 bytes_invalid=0 send_seq=7227 receive_seq=7227 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993250 heater_bed: target=80 temp=80.2 pwm=0.232 sd_pos=29374 sysload=0.19 cputime=48.519 memavail=7290788 print_time=1898.609 buffer_time=2.356 print_stall=0 extruder: target=250 temp=250.4 pwm=0.055
Stats 796673.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=198678 bytes_read=286767 bytes_retransmit=9 bytes_invalid=0 send_seq=7252 receive_seq=7252 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993238 heater_bed: target=80 temp=80.3 pwm=0.178 sd_pos=29460 sysload=0.17 cputime=48.579 memavail=7290788 print_time=1899.559 buffer_time=2.305 print_stall=0 extruder: target=250 temp=249.9 pwm=0.300
Stats 796674.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=199909 bytes_read=287201 bytes_retransmit=9 bytes_invalid=0 send_seq=7282 receive_seq=7282 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119993223 heater_bed: target=80 temp=80.3 pwm=0.270 sd_pos=29577 sysload=0.17 cputime=48.644 memavail=7290788 print_time=1900.852 buffer_time=2.597 print_stall=0 extruder: target=250 temp=250.0 pwm=0.254
Stats 796675.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=200643 bytes_read=287599 bytes_retransmit=9 bytes_invalid=0 send_seq=7303 receive_seq=7303 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993210 heater_bed: target=80 temp=80.3 pwm=0.341 sd_pos=29634 sysload=0.17 cputime=48.703 memavail=7290792 print_time=1901.421 buffer_time=2.165 print_stall=0 extruder: target=250 temp=250.2 pwm=0.254
Stats 796676.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=201856 bytes_read=288042 bytes_retransmit=9 bytes_invalid=0 send_seq=7333 receive_seq=7333 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993253 heater_bed: target=80 temp=80.4 pwm=0.213 sd_pos=29748 sysload=0.17 cputime=48.765 memavail=7290792 print_time=1902.403 buffer_time=2.147 print_stall=0 extruder: target=250 temp=249.9 pwm=0.402
Stats 796677.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=203540 bytes_read=288519 bytes_retransmit=9 bytes_invalid=0 send_seq=7370 receive_seq=7370 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119993243 heater_bed: target=80 temp=80.4 pwm=0.237 sd_pos=29960 sysload=0.17 cputime=48.822 memavail=7290792 print_time=1903.535 buffer_time=2.278 print_stall=0 extruder: target=250 temp=249.9 pwm=0.322
Stats 796678.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=206227 bytes_read=289067 bytes_retransmit=9 bytes_invalid=0 send_seq=7424 receive_seq=7424 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993236 heater_bed: target=80 temp=80.4 pwm=0.239 sd_pos=30564 sysload=0.16 cputime=48.896 memavail=7290792 print_time=1904.488 buffer_time=2.230 print_stall=0 extruder: target=240 temp=250.1 pwm=0.000
Stats 796679.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=207821 bytes_read=289549 bytes_retransmit=9 bytes_invalid=0 send_seq=7459 receive_seq=7459 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993229 heater_bed: target=80 temp=80.5 pwm=0.179 sd_pos=30730 sysload=0.16 cputime=48.959 memavail=7290792 print_time=1905.886 buffer_time=2.626 print_stall=0 extruder: target=240 temp=249.7 pwm=0.000
Stats 796680.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=209395 bytes_read=290007 bytes_retransmit=9 bytes_invalid=0 send_seq=7492 receive_seq=7492 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993254 heater_bed: target=80 temp=80.5 pwm=0.179 sd_pos=30902 sysload=0.16 cputime=49.023 memavail=7290792 print_time=1907.117 buffer_time=2.857 print_stall=0 extruder: target=240 temp=249.3 pwm=0.000
Stats 796681.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=210164 bytes_read=290390 bytes_retransmit=9 bytes_invalid=0 send_seq=7513 receive_seq=7513 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119993242 heater_bed: target=80 temp=80.5 pwm=0.239 sd_pos=30902 sysload=0.16 cputime=49.077 memavail=7290792 print_time=1907.277 buffer_time=2.017 print_stall=0 extruder: target=240 temp=248.6 pwm=0.000
Stats 796682.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=212719 bytes_read=290947 bytes_retransmit=9 bytes_invalid=0 send_seq=7563 receive_seq=7563 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993231 heater_bed: target=80 temp=80.6 pwm=0.076 sd_pos=31357 sysload=0.16 cputime=49.152 memavail=7290792 print_time=1908.663 buffer_time=2.403 print_stall=0 extruder: target=240 temp=247.4 pwm=0.000
Stats 796683.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=213992 bytes_read=291380 bytes_retransmit=9 bytes_invalid=0 send_seq=7594 receive_seq=7594 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993224 heater_bed: target=80 temp=80.6 pwm=0.171 sd_pos=31624 sysload=0.14 cputime=49.212 memavail=7290792 print_time=1909.519 buffer_time=2.258 print_stall=0 extruder: target=240 temp=246.3 pwm=0.000
Stats 796684.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=215885 bytes_read=291853 bytes_retransmit=9 bytes_invalid=0 send_seq=7633 receive_seq=7633 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993214 heater_bed: target=80 temp=80.6 pwm=0.171 sd_pos=32149 sysload=0.14 cputime=49.281 memavail=7290184 print_time=1910.358 buffer_time=2.092 print_stall=0 extruder: target=240 temp=245.1 pwm=0.000
Stats 796685.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=217436 bytes_read=292350 bytes_retransmit=9 bytes_invalid=0 send_seq=7668 receive_seq=7668 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993244 heater_bed: target=80 temp=80.6 pwm=0.193 sd_pos=32236 sysload=0.14 cputime=49.355 memavail=7290036 print_time=1911.511 buffer_time=2.245 print_stall=0 extruder: target=240 temp=243.7 pwm=0.236
Stats 796686.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=218937 bytes_read=292788 bytes_retransmit=9 bytes_invalid=0 send_seq=7700 receive_seq=7700 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993239 heater_bed: target=80 temp=80.7 pwm=0.116 sd_pos=32376 sysload=0.14 cputime=49.415 memavail=7290036 print_time=1912.610 buffer_time=2.343 print_stall=0 extruder: target=240 temp=242.9 pwm=0.182
Stats 796687.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=222294 bytes_read=293391 bytes_retransmit=9 bytes_invalid=0 send_seq=7765 receive_seq=7765 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993225 heater_bed: target=80 temp=80.7 pwm=0.116 sd_pos=33585 sysload=0.14 cputime=49.483 memavail=7290036 print_time=1913.480 buffer_time=2.213 print_stall=0 extruder: target=240 temp=242.1 pwm=0.200
Stats 796688.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=227641 bytes_read=294173 bytes_retransmit=9 bytes_invalid=0 send_seq=7860 receive_seq=7860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=375 freq=119993216 heater_bed: target=80 temp=80.8 pwm=0.028 sd_pos=34764 sysload=0.13 cputime=49.562 memavail=7290036 print_time=1914.720 buffer_time=2.451 print_stall=0 extruder: target=240 temp=241.1 pwm=0.286
Stats 796689.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=230869 bytes_read=294746 bytes_retransmit=9 bytes_invalid=0 send_seq=7919 receive_seq=7919 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=275 freq=119993244 heater_bed: target=80 temp=80.8 pwm=0.159 sd_pos=34995 sysload=0.13 cputime=49.640 memavail=7290036 print_time=1915.371 buffer_time=2.101 print_stall=0 extruder: target=240 temp=240.7 pwm=0.235
Stats 796690.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=235075 bytes_read=295400 bytes_retransmit=9 bytes_invalid=0 send_seq=7991 receive_seq=7991 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1403 freq=119993230 heater_bed: target=80 temp=80.8 pwm=0.159 sd_pos=35630 sysload=0.13 cputime=49.734 memavail=7290036 print_time=1916.614 buffer_time=2.343 print_stall=0 extruder: target=240 temp=240.5 pwm=0.182
Stats 796691.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=239956 bytes_read=296127 bytes_retransmit=9 bytes_invalid=0 send_seq=8075 receive_seq=8075 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=2140 freq=119993224 heater_bed: target=80 temp=80.7 pwm=0.228 sd_pos=35944 sysload=0.13 cputime=49.831 memavail=7290036 print_time=1917.861 buffer_time=2.590 print_stall=0 extruder: target=240 temp=240.3 pwm=0.189
Stats 796692.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=244484 bytes_read=296795 bytes_retransmit=9 bytes_invalid=0 send_seq=8153 receive_seq=8153 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=836 freq=119993217 heater_bed: target=80 temp=80.7 pwm=0.339 sd_pos=36110 sysload=0.13 cputime=49.918 memavail=7290036 print_time=1918.492 buffer_time=2.220 print_stall=0 extruder: target=240 temp=240.2 pwm=0.148
Stats 796693.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=248935 bytes_read=297463 bytes_retransmit=9 bytes_invalid=0 send_seq=8231 receive_seq=8231 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=2516 freq=119993206 heater_bed: target=80 temp=80.7 pwm=0.279 sd_pos=36741 sysload=0.12 cputime=50.015 memavail=7290036 print_time=1919.777 buffer_time=2.504 print_stall=0 extruder: target=240 temp=239.7 pwm=0.333
Stats 796694.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=253610 bytes_read=298170 bytes_retransmit=9 bytes_invalid=0 send_seq=8311 receive_seq=8311 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=2141 freq=119993199 heater_bed: target=80 temp=80.6 pwm=0.291 sd_pos=38010 sysload=0.12 cputime=50.123 memavail=7289784 print_time=1920.729 buffer_time=2.453 print_stall=0 extruder: target=240 temp=239.4 pwm=0.333
Stats 796695.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=258722 bytes_read=298904 bytes_retransmit=9 bytes_invalid=0 send_seq=8399 receive_seq=8399 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=1415 freq=119993190 heater_bed: target=80 temp=80.6 pwm=0.276 sd_pos=38575 sysload=0.12 cputime=50.229 memavail=7290548 print_time=1921.585 buffer_time=2.309 print_stall=0 extruder: target=240 temp=239.2 pwm=0.322
Stats 796696.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=263381 bytes_read=299582 bytes_retransmit=9 bytes_invalid=0 send_seq=8479 receive_seq=8479 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=1861 freq=119993185 heater_bed: target=80 temp=80.6 pwm=0.284 sd_pos=39437 sysload=0.12 cputime=50.334 memavail=7290548 print_time=1922.775 buffer_time=2.498 print_stall=0 extruder: target=240 temp=239.5 pwm=0.218
Stats 796697.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=266896 bytes_read=300194 bytes_retransmit=9 bytes_invalid=0 send_seq=8540 receive_seq=8540 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993177 heater_bed: target=80 temp=80.5 pwm=0.344 sd_pos=39552 sysload=0.12 cputime=50.411 memavail=7290324 print_time=1923.660 buffer_time=2.382 print_stall=0 extruder: target=240 temp=239.3 pwm=0.306
Stats 796698.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=268327 bytes_read=300642 bytes_retransmit=9 bytes_invalid=0 send_seq=8574 receive_seq=8574 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993167 heater_bed: target=80 temp=80.5 pwm=0.422 sd_pos=39776 sysload=0.11 cputime=50.466 memavail=7290324 print_time=1924.528 buffer_time=2.250 print_stall=0 extruder: target=240 temp=239.4 pwm=0.244
Stats 796699.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=271152 bytes_read=301210 bytes_retransmit=9 bytes_invalid=0 send_seq=8629 receive_seq=8629 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993161 heater_bed: target=80 temp=80.5 pwm=0.304 sd_pos=40242 sysload=0.11 cputime=50.541 memavail=7290324 print_time=1925.997 buffer_time=2.717 print_stall=0 extruder: target=240 temp=239.4 pwm=0.244
Stats 796700.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=271890 bytes_read=301618 bytes_retransmit=9 bytes_invalid=0 send_seq=8649 receive_seq=8649 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119993153 heater_bed: target=80 temp=80.4 pwm=0.415 sd_pos=40242 sysload=0.11 cputime=50.595 memavail=7290324 print_time=1926.321 buffer_time=2.041 print_stall=0 extruder: target=240 temp=239.7 pwm=0.208
Stats 796701.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=272795 bytes_read=302016 bytes_retransmit=9 bytes_invalid=0 send_seq=8673 receive_seq=8673 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993149 heater_bed: target=80 temp=80.4 pwm=0.256 sd_pos=40386 sysload=0.11 cputime=50.651 memavail=7290324 print_time=1927.781 buffer_time=2.501 print_stall=0 extruder: target=240 temp=239.5 pwm=0.315
Stats 796702.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=275024 bytes_read=302539 bytes_retransmit=9 bytes_invalid=0 send_seq=8719 receive_seq=8719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993145 heater_bed: target=80 temp=80.3 pwm=0.398 sd_pos=40747 sysload=0.11 cputime=50.719 memavail=7290324 print_time=1928.832 buffer_time=2.551 print_stall=0 extruder: target=240 temp=239.5 pwm=0.333
Stats 796703.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=277442 bytes_read=303081 bytes_retransmit=9 bytes_invalid=0 send_seq=8769 receive_seq=8769 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993153 heater_bed: target=80 temp=80.3 pwm=0.332 sd_pos=40909 sysload=0.10 cputime=50.785 memavail=7290324 print_time=1930.070 buffer_time=2.788 print_stall=0 extruder: target=240 temp=239.2 pwm=0.376
Stats 796704.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=279084 bytes_read=303544 bytes_retransmit=9 bytes_invalid=0 send_seq=8806 receive_seq=8806 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119993147 heater_bed: target=80 temp=80.2 pwm=0.423 sd_pos=41289 sysload=0.10 cputime=50.848 memavail=7290072 print_time=1930.845 buffer_time=2.559 print_stall=0 extruder: target=240 temp=239.2 pwm=0.313
Stats 796705.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=280048 bytes_read=303977 bytes_retransmit=9 bytes_invalid=0 send_seq=8831 receive_seq=8831 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993141 heater_bed: target=80 temp=80.2 pwm=0.435 sd_pos=41520 sysload=0.10 cputime=50.908 memavail=7289568 print_time=1931.295 buffer_time=2.008 print_stall=0 extruder: target=240 temp=239.5 pwm=0.272
Stats 796706.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=281807 bytes_read=304464 bytes_retransmit=9 bytes_invalid=0 send_seq=8870 receive_seq=8870 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993138 heater_bed: target=80 temp=80.1 pwm=0.517 sd_pos=42046 sysload=0.10 cputime=50.972 memavail=7289568 print_time=1932.412 buffer_time=2.124 print_stall=0 extruder: target=240 temp=239.6 pwm=0.252
Stats 796707.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=285471 bytes_read=305082 bytes_retransmit=9 bytes_invalid=0 send_seq=8938 receive_seq=8938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993137 heater_bed: target=80 temp=80.1 pwm=0.423 sd_pos=42687 sysload=0.10 cputime=51.038 memavail=7289568 print_time=1934.008 buffer_time=2.719 print_stall=0 extruder: target=240 temp=239.8 pwm=0.252
Stats 796708.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=288522 bytes_read=305667 bytes_retransmit=9 bytes_invalid=0 send_seq=8997 receive_seq=8997 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993131 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=42937 sysload=0.09 cputime=51.101 memavail=7289568 print_time=1934.617 buffer_time=2.327 print_stall=0 extruder: target=240 temp=239.9 pwm=0.252
Stats 796709.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=292650 bytes_read=306341 bytes_retransmit=9 bytes_invalid=0 send_seq=9075 receive_seq=9075 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=178 freq=119993127 heater_bed: target=80 temp=80.0 pwm=0.353 sd_pos=43217 sysload=0.09 cputime=51.164 memavail=7289568 print_time=1935.629 buffer_time=2.338 print_stall=0 extruder: target=240 temp=239.9 pwm=0.203
Stats 796710.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=295804 bytes_read=306914 bytes_retransmit=9 bytes_invalid=0 send_seq=9132 receive_seq=9132 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993132 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=43677 sysload=0.09 cputime=51.244 memavail=7289568 print_time=1936.367 buffer_time=2.075 print_stall=0 extruder: target=240 temp=239.6 pwm=0.402
Stats 796711.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=300967 bytes_read=307662 bytes_retransmit=9 bytes_invalid=0 send_seq=9223 receive_seq=9223 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993129 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=44012 sysload=0.09 cputime=51.324 memavail=7289568 print_time=1937.571 buffer_time=2.279 print_stall=0 extruder: target=240 temp=239.7 pwm=0.312
Stats 796712.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=304814 bytes_read=308299 bytes_retransmit=9 bytes_invalid=0 send_seq=9292 receive_seq=9292 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=1275 freq=119993183 heater_bed: target=80 temp=79.9 pwm=0.411 sd_pos=44348 sysload=0.09 cputime=51.411 memavail=7289568 print_time=1938.762 buffer_time=2.469 print_stall=0 extruder: target=240 temp=239.5 pwm=0.405
Stats 796713.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=308892 bytes_read=308937 bytes_retransmit=9 bytes_invalid=0 send_seq=9364 receive_seq=9364 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119993172 heater_bed: target=80 temp=80.0 pwm=0.345 sd_pos=44511 sysload=0.09 cputime=51.498 memavail=7289568 print_time=1939.350 buffer_time=2.055 print_stall=0 extruder: target=240 temp=239.8 pwm=0.281
Stats 796714.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=313528 bytes_read=309640 bytes_retransmit=9 bytes_invalid=0 send_seq=9446 receive_seq=9446 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=175 freq=119993164 heater_bed: target=80 temp=79.9 pwm=0.357 sd_pos=45364 sysload=0.09 cputime=51.600 memavail=7290456 print_time=1940.530 buffer_time=2.234 print_stall=0 extruder: target=240 temp=239.9 pwm=0.281
Stats 796715.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=318074 bytes_read=310343 bytes_retransmit=9 bytes_invalid=0 send_seq=9525 receive_seq=9525 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=161 freq=119993162 heater_bed: target=80 temp=80.0 pwm=0.282 sd_pos=45638 sysload=0.09 cputime=51.681 memavail=7291048 print_time=1941.583 buffer_time=2.286 print_stall=0 extruder: target=240 temp=240.1 pwm=0.243
Stats 796716.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=322409 bytes_read=311006 bytes_retransmit=9 bytes_invalid=0 send_seq=9602 receive_seq=9602 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1768 freq=119993160 heater_bed: target=80 temp=79.9 pwm=0.345 sd_pos=46471 sysload=0.09 cputime=51.768 memavail=7290824 print_time=1942.939 buffer_time=2.641 print_stall=0 extruder: target=240 temp=240.1 pwm=0.243
Stats 796717.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=326523 bytes_read=311664 bytes_retransmit=9 bytes_invalid=0 send_seq=9675 receive_seq=9675 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=31 freq=119993153 heater_bed: target=80 temp=79.9 pwm=0.408 sd_pos=46635 sysload=0.09 cputime=51.861 memavail=7290824 print_time=1943.526 buffer_time=2.228 print_stall=0 extruder: target=240 temp=239.8 pwm=0.391
Stats 796718.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=330003 bytes_read=312266 bytes_retransmit=9 bytes_invalid=0 send_seq=9737 receive_seq=9737 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993150 heater_bed: target=80 temp=79.9 pwm=0.363 sd_pos=47296 sysload=0.08 cputime=51.944 memavail=7290824 print_time=1944.348 buffer_time=2.048 print_stall=0 extruder: target=240 temp=239.8 pwm=0.306
Stats 796719.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=335112 bytes_read=313005 bytes_retransmit=9 bytes_invalid=0 send_seq=9826 receive_seq=9826 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=798 freq=119993140 heater_bed: target=80 temp=79.9 pwm=0.363 sd_pos=47970 sysload=0.08 cputime=52.032 memavail=7290824 print_time=1945.735 buffer_time=2.434 print_stall=0 extruder: target=240 temp=239.5 pwm=0.384
Stats 796720.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=339252 bytes_read=313673 bytes_retransmit=9 bytes_invalid=0 send_seq=9901 receive_seq=9901 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=277 freq=119993139 heater_bed: target=80 temp=80.0 pwm=0.253 sd_pos=48195 sysload=0.08 cputime=52.109 memavail=7290824 print_time=1946.617 buffer_time=2.315 print_stall=0 extruder: target=240 temp=239.8 pwm=0.314
Stats 796721.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=343497 bytes_read=314340 bytes_retransmit=9 bytes_invalid=0 send_seq=9976 receive_seq=9976 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119993144 heater_bed: target=80 temp=80.0 pwm=0.273 sd_pos=48717 sysload=0.08 cputime=52.191 memavail=7290824 print_time=1947.732 buffer_time=2.427 print_stall=0 extruder: target=240 temp=240.2 pwm=0.146
Stats 796722.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=346929 bytes_read=314948 bytes_retransmit=9 bytes_invalid=0 send_seq=10042 receive_seq=10042 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119993137 heater_bed: target=80 temp=79.9 pwm=0.338 sd_pos=48945 sysload=0.08 cputime=52.257 memavail=7290824 print_time=1948.728 buffer_time=2.423 print_stall=0 extruder: target=240 temp=240.1 pwm=0.256
Stats 796723.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=350996 bytes_read=315632 bytes_retransmit=9 bytes_invalid=0 send_seq=10118 receive_seq=10118 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993151 heater_bed: target=80 temp=79.9 pwm=0.393 sd_pos=49441 sysload=0.07 cputime=52.328 memavail=7290824 print_time=1949.763 buffer_time=2.458 print_stall=0 extruder: target=240 temp=240.2 pwm=0.246
Stats 796724.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=354746 bytes_read=316300 bytes_retransmit=9 bytes_invalid=0 send_seq=10190 receive_seq=10190 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993145 heater_bed: target=80 temp=79.9 pwm=0.393 sd_pos=49672 sysload=0.07 cputime=52.385 memavail=7290824 print_time=1950.760 buffer_time=2.454 print_stall=0 extruder: target=240 temp=239.8 pwm=0.421
Stats 796725.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=357504 bytes_read=316858 bytes_retransmit=9 bytes_invalid=0 send_seq=10246 receive_seq=10246 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993152 heater_bed: target=80 temp=79.9 pwm=0.465 sd_pos=50087 sysload=0.07 cputime=52.467 memavail=7291380 print_time=1951.431 buffer_time=2.124 print_stall=0 extruder: target=240 temp=239.6 pwm=0.431
Stats 796726.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=359609 bytes_read=317376 bytes_retransmit=9 bytes_invalid=0 send_seq=10291 receive_seq=10291 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993143 heater_bed: target=80 temp=79.9 pwm=0.380 sd_pos=50201 sysload=0.07 cputime=52.515 memavail=7291312 print_time=1952.323 buffer_time=2.016 print_stall=0 extruder: target=240 temp=239.8 pwm=0.314
Stats 796727.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=362663 bytes_read=317973 bytes_retransmit=9 bytes_invalid=0 send_seq=10352 receive_seq=10352 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993132 heater_bed: target=80 temp=79.9 pwm=0.456 sd_pos=50370 sysload=0.07 cputime=52.571 memavail=7291312 print_time=1953.511 buffer_time=2.203 print_stall=0 extruder: target=240 temp=239.8 pwm=0.332
Stats 796728.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=365990 bytes_read=318571 bytes_retransmit=9 bytes_invalid=0 send_seq=10416 receive_seq=10416 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993124 heater_bed: target=80 temp=79.8 pwm=0.507 sd_pos=50540 sysload=0.07 cputime=52.632 memavail=7291312 print_time=1954.587 buffer_time=2.278 print_stall=0 extruder: target=240 temp=240.0 pwm=0.255
Stats 796729.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=369854 bytes_read=319250 bytes_retransmit=9 bytes_invalid=0 send_seq=10490 receive_seq=10490 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993129 heater_bed: target=80 temp=79.9 pwm=0.319 sd_pos=50768 sysload=0.07 cputime=52.684 memavail=7291312 print_time=1955.663 buffer_time=2.354 print_stall=0 extruder: target=240 temp=239.8 pwm=0.384
Stats 796730.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=373021 bytes_read=319852 bytes_retransmit=9 bytes_invalid=0 send_seq=10553 receive_seq=10552 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993126 heater_bed: target=80 temp=79.9 pwm=0.290 sd_pos=50940 sysload=0.07 cputime=52.747 memavail=7291312 print_time=1956.311 buffer_time=1.999 print_stall=0 extruder: target=240 temp=240.2 pwm=0.210
Stats 796731.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=377883 bytes_read=320570 bytes_retransmit=9 bytes_invalid=0 send_seq=10640 receive_seq=10640 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=179 freq=119993118 heater_bed: target=80 temp=79.9 pwm=0.390 sd_pos=51647 sysload=0.07 cputime=52.844 memavail=7291316 print_time=1957.731 buffer_time=2.419 print_stall=0 extruder: target=240 temp=239.8 pwm=0.349
Stats 796732.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=379546 bytes_read=321038 bytes_retransmit=9 bytes_invalid=0 send_seq=10675 receive_seq=10675 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993118 heater_bed: target=80 temp=79.9 pwm=0.337 sd_pos=51773 sysload=0.07 cputime=52.902 memavail=7291316 print_time=1958.437 buffer_time=2.124 print_stall=0 extruder: target=240 temp=239.5 pwm=0.457
Stats 796733.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=380546 bytes_read=321465 bytes_retransmit=9 bytes_invalid=0 send_seq=10702 receive_seq=10702 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993115 heater_bed: target=80 temp=79.9 pwm=0.276 sd_pos=51923 sysload=0.06 cputime=52.951 memavail=7291316 print_time=1959.469 buffer_time=2.156 print_stall=0 extruder: target=240 temp=239.8 pwm=0.344
Stats 796734.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=383599 bytes_read=322043 bytes_retransmit=9 bytes_invalid=0 send_seq=10762 receive_seq=10762 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993138 heater_bed: target=80 temp=79.9 pwm=0.286 sd_pos=52343 sysload=0.06 cputime=53.036 memavail=7291316 print_time=1961.290 buffer_time=2.975 print_stall=0 extruder: target=240 temp=239.9 pwm=0.258
Stats 796735.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=384485 bytes_read=322467 bytes_retransmit=9 bytes_invalid=0 send_seq=10785 receive_seq=10785 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993134 heater_bed: target=80 temp=79.9 pwm=0.264 sd_pos=52343 sysload=0.06 cputime=53.092 memavail=7291316 print_time=1961.479 buffer_time=2.163 print_stall=0 extruder: target=240 temp=239.9 pwm=0.332
Stats 796736.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=385883 bytes_read=322919 bytes_retransmit=9 bytes_invalid=0 send_seq=10817 receive_seq=10817 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993126 heater_bed: target=80 temp=79.9 pwm=0.335 sd_pos=52429 sysload=0.06 cputime=53.146 memavail=7291316 print_time=1962.331 buffer_time=2.014 print_stall=0 extruder: target=240 temp=240.4 pwm=0.093
Stats 796737.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=387623 bytes_read=323382 bytes_retransmit=9 bytes_invalid=0 send_seq=10854 receive_seq=10854 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119993122 heater_bed: target=80 temp=79.9 pwm=0.428 sd_pos=52657 sysload=0.06 cputime=53.209 memavail=7291316 print_time=1963.693 buffer_time=2.376 print_stall=0 extruder: target=240 temp=240.2 pwm=0.294
Stats 796738.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=388874 bytes_read=323815 bytes_retransmit=9 bytes_invalid=0 send_seq=10882 receive_seq=10882 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993158 heater_bed: target=80 temp=79.9 pwm=0.367 sd_pos=52686 sysload=0.06 cputime=53.263 memavail=7291316 print_time=1964.592 buffer_time=2.274 print_stall=0 extruder: target=240 temp=240.1 pwm=0.294
Stats 796739.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=391579 bytes_read=324382 bytes_retransmit=9 bytes_invalid=0 send_seq=10937 receive_seq=10937 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993155 heater_bed: target=80 temp=79.9 pwm=0.454 sd_pos=53112 sysload=0.06 cputime=53.330 memavail=7291316 print_time=1965.637 buffer_time=2.318 print_stall=0 extruder: target=240 temp=239.9 pwm=0.383
Stats 796740.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=394260 bytes_read=324955 bytes_retransmit=9 bytes_invalid=0 send_seq=10993 receive_seq=10993 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993146 heater_bed: target=80 temp=79.9 pwm=0.440 sd_pos=53425 sysload=0.06 cputime=53.388 memavail=7291316 print_time=1966.460 buffer_time=2.137 print_stall=0 extruder: target=240 temp=239.7 pwm=0.445
Stats 796741.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=399053 bytes_read=325678 bytes_retransmit=9 bytes_invalid=0 send_seq=11079 receive_seq=11079 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993140 heater_bed: target=80 temp=79.8 pwm=0.499 sd_pos=54287 sysload=0.06 cputime=53.471 memavail=7291316 print_time=1967.716 buffer_time=2.393 print_stall=0 extruder: target=240 temp=240.1 pwm=0.227
Stats 796742.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=403329 bytes_read=326365 bytes_retransmit=9 bytes_invalid=0 send_seq=11158 receive_seq=11158 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=819 freq=119993133 heater_bed: target=80 temp=79.8 pwm=0.445 sd_pos=54631 sysload=0.06 cputime=53.534 memavail=7291092 print_time=1968.919 buffer_time=2.592 print_stall=0 extruder: target=240 temp=239.9 pwm=0.347
Stats 796743.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=406803 bytes_read=326958 bytes_retransmit=9 bytes_invalid=0 send_seq=11221 receive_seq=11221 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=176 freq=119993135 heater_bed: target=80 temp=79.8 pwm=0.533 sd_pos=54802 sysload=0.05 cputime=53.612 memavail=7291092 print_time=1969.536 buffer_time=2.208 print_stall=0 extruder: target=240 temp=240.2 pwm=0.269
Stats 796744.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=411057 bytes_read=327636 bytes_retransmit=9 bytes_invalid=0 send_seq=11296 receive_seq=11296 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1505 freq=119993136 heater_bed: target=80 temp=79.8 pwm=0.392 sd_pos=55150 sysload=0.05 cputime=53.710 memavail=7291016 print_time=1970.786 buffer_time=2.457 print_stall=0 extruder: target=240 temp=240.3 pwm=0.206
Stats 796745.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=415354 bytes_read=328300 bytes_retransmit=9 bytes_invalid=0 send_seq=11372 receive_seq=11372 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=332 freq=119993135 heater_bed: target=80 temp=79.8 pwm=0.392 sd_pos=55306 sysload=0.05 cputime=53.812 memavail=7291080 print_time=1971.419 buffer_time=2.089 print_stall=0 extruder: target=240 temp=240.3 pwm=0.202
Stats 796746.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=419851 bytes_read=328958 bytes_retransmit=9 bytes_invalid=0 send_seq=11449 receive_seq=11449 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=2066 freq=119993135 heater_bed: target=80 temp=79.8 pwm=0.392 sd_pos=56299 sysload=0.05 cputime=53.923 memavail=7291080 print_time=1972.829 buffer_time=2.498 print_stall=0 extruder: target=240 temp=240.3 pwm=0.200
Stats 796747.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=424689 bytes_read=329666 bytes_retransmit=9 bytes_invalid=0 send_seq=11532 receive_seq=11532 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1455 freq=119993152 heater_bed: target=80 temp=79.8 pwm=0.374 sd_pos=57016 sysload=0.05 cputime=54.028 memavail=7291080 print_time=1973.604 buffer_time=2.272 print_stall=0 extruder: target=240 temp=240.0 pwm=0.288
Stats 796748.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=429375 bytes_read=330358 bytes_retransmit=9 bytes_invalid=0 send_seq=11612 receive_seq=11612 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=914 freq=119993151 heater_bed: target=80 temp=79.8 pwm=0.374 sd_pos=57434 sysload=0.05 cputime=54.130 memavail=7291080 print_time=1974.459 buffer_time=2.126 print_stall=0 extruder: target=240 temp=239.9 pwm=0.349
Stats 796749.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=433876 bytes_read=331031 bytes_retransmit=9 bytes_invalid=0 send_seq=11691 receive_seq=11691 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993148 heater_bed: target=80 temp=79.8 pwm=0.532 sd_pos=57779 sysload=0.05 cputime=54.225 memavail=7291080 print_time=1975.945 buffer_time=2.611 print_stall=0 extruder: target=240 temp=239.8 pwm=0.340
Stats 796750.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=434676 bytes_read=331455 bytes_retransmit=9 bytes_invalid=0 send_seq=11714 receive_seq=11714 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119993143 heater_bed: target=80 temp=79.7 pwm=0.487 sd_pos=57809 sysload=0.05 cputime=54.282 memavail=7291080 print_time=1976.394 buffer_time=2.059 print_stall=0 extruder: target=240 temp=240.1 pwm=0.268
Stats 796751.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=436150 bytes_read=331917 bytes_retransmit=9 bytes_invalid=0 send_seq=11748 receive_seq=11748 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993141 heater_bed: target=80 temp=79.8 pwm=0.390 sd_pos=57999 sysload=0.05 cputime=54.348 memavail=7291080 print_time=1977.473 buffer_time=2.137 print_stall=0 extruder: target=240 temp=240.0 pwm=0.325
Stats 796752.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=439293 bytes_read=332490 bytes_retransmit=9 bytes_invalid=0 send_seq=11807 receive_seq=11807 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119993135 heater_bed: target=80 temp=79.8 pwm=0.390 sd_pos=58532 sysload=0.05 cputime=54.418 memavail=7291080 print_time=1979.223 buffer_time=2.886 print_stall=0 extruder: target=240 temp=240.1 pwm=0.260
Stats 796753.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=440051 bytes_read=332903 bytes_retransmit=9 bytes_invalid=0 send_seq=11831 receive_seq=11831 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993132 heater_bed: target=80 temp=79.7 pwm=0.454 sd_pos=58532 sysload=0.04 cputime=54.467 memavail=7291080 print_time=1979.395 buffer_time=2.058 print_stall=0 extruder: target=240 temp=240.3 pwm=0.188
Stats 796754.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=440983 bytes_read=333320 bytes_retransmit=9 bytes_invalid=0 send_seq=11856 receive_seq=11856 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993127 heater_bed: target=80 temp=79.8 pwm=0.351 sd_pos=58676 sysload=0.04 cputime=54.523 memavail=7291080 print_time=1980.988 buffer_time=2.650 print_stall=0 extruder: target=240 temp=240.2 pwm=0.206
Stats 796755.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=444164 bytes_read=333933 bytes_retransmit=9 bytes_invalid=0 send_seq=11920 receive_seq=11920 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119993126 heater_bed: target=80 temp=79.7 pwm=0.459 sd_pos=59138 sysload=0.04 cputime=54.595 memavail=7290580 print_time=1982.337 buffer_time=2.998 print_stall=0 extruder: target=240 temp=239.9 pwm=0.327
Stats 796756.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=445078 bytes_read=334346 bytes_retransmit=9 bytes_invalid=0 send_seq=11944 receive_seq=11944 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119993154 heater_bed: target=80 temp=79.7 pwm=0.459 sd_pos=59222 sysload=0.04 cputime=54.644 memavail=7290580 print_time=1982.883 buffer_time=2.540 print_stall=0 extruder: target=240 temp=240.1 pwm=0.251
Stats 796757.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=446913 bytes_read=334838 bytes_retransmit=9 bytes_invalid=0 send_seq=11984 receive_seq=11984 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993152 heater_bed: target=80 temp=79.7 pwm=0.351 sd_pos=59730 sysload=0.04 cputime=54.707 memavail=7290292 print_time=1983.519 buffer_time=2.175 print_stall=0 extruder: target=240 temp=239.7 pwm=0.374
Stats 796758.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=449598 bytes_read=335386 bytes_retransmit=9 bytes_invalid=0 send_seq=12038 receive_seq=12038 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993145 heater_bed: target=80 temp=79.7 pwm=0.421 sd_pos=60367 sysload=0.04 cputime=54.782 memavail=7290384 print_time=1984.757 buffer_time=2.413 print_stall=0 extruder: target=240 temp=240.0 pwm=0.271
Stats 796759.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=451549 bytes_read=335884 bytes_retransmit=9 bytes_invalid=0 send_seq=12079 receive_seq=12079 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119993137 heater_bed: target=80 temp=79.7 pwm=0.460 sd_pos=60881 sysload=0.04 cputime=54.844 memavail=7290384 print_time=1985.812 buffer_time=2.467 print_stall=0 extruder: target=240 temp=240.1 pwm=0.176
Stats 796760.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=455283 bytes_read=336552 bytes_retransmit=9 bytes_invalid=0 send_seq=12151 receive_seq=12151 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993133 heater_bed: target=80 temp=79.7 pwm=0.409 sd_pos=61353 sysload=0.04 cputime=54.910 memavail=7290384 print_time=1986.721 buffer_time=2.375 print_stall=0 extruder: target=240 temp=240.1 pwm=0.282
Stats 796761.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=459834 bytes_read=337255 bytes_retransmit=9 bytes_invalid=0 send_seq=12236 receive_seq=12236 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119993129 heater_bed: target=80 temp=79.7 pwm=0.484 sd_pos=61653 sysload=0.04 cputime=54.976 memavail=7290384 print_time=1987.800 buffer_time=2.454 print_stall=0 extruder: target=240 temp=239.9 pwm=0.358
Stats 796762.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=461915 bytes_read=337763 bytes_retransmit=9 bytes_invalid=0 send_seq=12279 receive_seq=12279 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993134 heater_bed: target=80 temp=79.7 pwm=0.399 sd_pos=61765 sysload=0.04 cputime=55.040 memavail=7290384 print_time=1988.355 buffer_time=2.008 print_stall=0 extruder: target=240 temp=239.6 pwm=0.447
Stats 796763.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=465145 bytes_read=338360 bytes_retransmit=9 bytes_invalid=0 send_seq=12340 receive_seq=12340 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119993135 heater_bed: target=80 temp=79.7 pwm=0.517 sd_pos=61936 sysload=0.04 cputime=55.105 memavail=7290384 print_time=1989.368 buffer_time=2.021 print_stall=0 extruder: target=240 temp=239.7 pwm=0.374
Stats 796764.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=468253 bytes_read=338943 bytes_retransmit=9 bytes_invalid=0 send_seq=12401 receive_seq=12401 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993131 heater_bed: target=80 temp=79.7 pwm=0.479 sd_pos=62104 sysload=0.04 cputime=55.175 memavail=7290384 print_time=1990.492 buffer_time=2.144 print_stall=0 extruder: target=240 temp=239.8 pwm=0.313
Stats 796765.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=472147 bytes_read=339622 bytes_retransmit=9 bytes_invalid=0 send_seq=12475 receive_seq=12475 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119993132 heater_bed: target=80 temp=79.7 pwm=0.460 sd_pos=62488 sysload=0.04 cputime=55.253 memavail=7289888 print_time=1991.975 buffer_time=2.626 print_stall=0 extruder: target=240 temp=240.1 pwm=0.253
Stats 796766.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=475326 bytes_read=340229 bytes_retransmit=9 bytes_invalid=0 send_seq=12538 receive_seq=12538 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993128 heater_bed: target=80 temp=79.7 pwm=0.390 sd_pos=62839 sysload=0.04 cputime=55.310 memavail=7289888 print_time=1992.713 buffer_time=2.364 print_stall=0 extruder: target=240 temp=240.3 pwm=0.191
Stats 796767.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=478896 bytes_read=340842 bytes_retransmit=9 bytes_invalid=0 send_seq=12605 receive_seq=12605 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993126 heater_bed: target=80 temp=79.8 pwm=0.320 sd_pos=63569 sysload=0.04 cputime=55.380 memavail=7289888 print_time=1993.464 buffer_time=2.114 print_stall=0 extruder: target=240 temp=240.2 pwm=0.259
Stats 796768.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=483035 bytes_read=341500 bytes_retransmit=9 bytes_invalid=0 send_seq=12678 receive_seq=12678 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=316 freq=119993140 heater_bed: target=80 temp=79.8 pwm=0.188 sd_pos=63873 sysload=0.03 cputime=55.456 memavail=7289888 print_time=1994.448 buffer_time=2.098 print_stall=0 extruder: target=240 temp=239.8 pwm=0.409
Stats 796769.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=487745 bytes_read=342197 bytes_retransmit=9 bytes_invalid=0 send_seq=12759 receive_seq=12759 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=2022 freq=119993161 heater_bed: target=80 temp=79.8 pwm=0.428 sd_pos=65149 sysload=0.03 cputime=55.573 memavail=7289888 print_time=1995.972 buffer_time=2.621 print_stall=0 extruder: target=240 temp=239.8 pwm=0.278
Stats 796770.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=492344 bytes_read=342886 bytes_retransmit=9 bytes_invalid=0 send_seq=12838 receive_seq=12838 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=669 freq=119993163 heater_bed: target=80 temp=79.9 pwm=0.333 sd_pos=65315 sysload=0.03 cputime=55.664 memavail=7289888 print_time=1996.579 buffer_time=2.227 print_stall=0 extruder: target=240 temp=239.6 pwm=0.346
Stats 796771.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=496476 bytes_read=343549 bytes_retransmit=9 bytes_invalid=0 send_seq=12912 receive_seq=12912 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2391 freq=119993164 heater_bed: target=80 temp=79.9 pwm=0.333 sd_pos=65649 sysload=0.03 cputime=55.758 memavail=7289888 print_time=1997.776 buffer_time=2.425 print_stall=0 extruder: target=240 temp=239.7 pwm=0.345
Stats 796772.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=501161 bytes_read=344246 bytes_retransmit=9 bytes_invalid=0 send_seq=12993 receive_seq=12993 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=851 freq=119993173 heater_bed: target=80 temp=79.9 pwm=0.273 sd_pos=65815 sysload=0.03 cputime=55.852 memavail=7289888 print_time=1998.367 buffer_time=2.015 print_stall=0 extruder: target=240 temp=240.1 pwm=0.263
Stats 796773.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=506145 bytes_read=344959 bytes_retransmit=9 bytes_invalid=0 send_seq=13080 receive_seq=13080 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=2025 freq=119993179 heater_bed: target=80 temp=80.0 pwm=0.273 sd_pos=66403 sysload=0.03 cputime=55.949 memavail=7289888 print_time=1999.625 buffer_time=2.272 print_stall=0 extruder: target=240 temp=240.2 pwm=0.183
Stats 796774.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=511271 bytes_read=345703 bytes_retransmit=9 bytes_invalid=0 send_seq=13167 receive_seq=13167 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=675 freq=119993176 heater_bed: target=80 temp=80.0 pwm=0.327 sd_pos=66612 sysload=0.03 cputime=56.051 memavail=7290480 print_time=2000.569 buffer_time=2.216 print_stall=0 extruder: target=240 temp=239.9 pwm=0.393
Stats 796775.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=516180 bytes_read=346420 bytes_retransmit=9 bytes_invalid=0 send_seq=13252 receive_seq=13252 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993169 heater_bed: target=80 temp=80.0 pwm=0.345 sd_pos=66843 sysload=0.03 cputime=56.118 memavail=7290624 print_time=2001.569 buffer_time=2.215 print_stall=0 extruder: target=240 temp=240.1 pwm=0.272
Stats 796776.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=520424 bytes_read=347088 bytes_retransmit=9 bytes_invalid=0 send_seq=13330 receive_seq=13330 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119993160 heater_bed: target=80 temp=80.0 pwm=0.226 sd_pos=67073 sysload=0.03 cputime=56.169 memavail=7290624 print_time=2002.577 buffer_time=2.222 print_stall=0 extruder: target=240 temp=239.8 pwm=0.371
Stats 796777.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=524651 bytes_read=347756 bytes_retransmit=9 bytes_invalid=0 send_seq=13405 receive_seq=13405 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=215 freq=119993152 heater_bed: target=80 temp=80.0 pwm=0.314 sd_pos=67591 sysload=0.03 cputime=56.248 memavail=7290624 print_time=2003.656 buffer_time=2.301 print_stall=0 extruder: target=240 temp=239.8 pwm=0.358
Stats 796778.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=528893 bytes_read=348418 bytes_retransmit=9 bytes_invalid=0 send_seq=13479 receive_seq=13479 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=393 freq=119993208 heater_bed: target=80 temp=80.1 pwm=0.250 sd_pos=67817 sysload=0.19 cputime=56.311 memavail=7290624 print_time=2004.627 buffer_time=2.271 print_stall=0 extruder: target=240 temp=240.1 pwm=0.245
Stats 796779.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=532931 bytes_read=349061 bytes_retransmit=9 bytes_invalid=0 send_seq=13552 receive_seq=13552 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=2101 freq=119993195 heater_bed: target=80 temp=80.1 pwm=0.262 sd_pos=68147 sysload=0.19 cputime=56.379 memavail=7290624 print_time=2005.769 buffer_time=2.412 print_stall=0 extruder: target=240 temp=240.1 pwm=0.254
Stats 796780.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=537439 bytes_read=349765 bytes_retransmit=9 bytes_invalid=0 send_seq=13632 receive_seq=13632 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=881 freq=119993185 heater_bed: target=80 temp=80.1 pwm=0.337 sd_pos=68348 sysload=0.19 cputime=56.469 memavail=7290624 print_time=2006.434 buffer_time=2.077 print_stall=0 extruder: target=240 temp=240.3 pwm=0.186
Stats 796781.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=542375 bytes_read=350479 bytes_retransmit=9 bytes_invalid=0 send_seq=13718 receive_seq=13718 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=1251 freq=119993186 heater_bed: target=80 temp=80.1 pwm=0.401 sd_pos=68745 sysload=0.19 cputime=56.561 memavail=7290624 print_time=2007.653 buffer_time=2.295 print_stall=0 extruder: target=240 temp=240.0 pwm=0.326
Stats 796782.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=547327 bytes_read=351184 bytes_retransmit=9 bytes_invalid=0 send_seq=13804 receive_seq=13804 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=2876 freq=119993190 heater_bed: target=80 temp=80.1 pwm=0.403 sd_pos=69164 sysload=0.19 cputime=56.656 memavail=7290624 print_time=2008.931 buffer_time=2.574 print_stall=0 extruder: target=240 temp=239.7 pwm=0.387
Stats 796783.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=551857 bytes_read=351891 bytes_retransmit=9 bytes_invalid=0 send_seq=13884 receive_seq=13884 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=2548 freq=119993182 heater_bed: target=80 temp=80.1 pwm=0.384 sd_pos=70131 sysload=0.17 cputime=56.754 memavail=7290624 print_time=2009.819 buffer_time=2.461 print_stall=0 extruder: target=240 temp=240.0 pwm=0.237
Stats 796784.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=556716 bytes_read=352610 bytes_retransmit=9 bytes_invalid=0 send_seq=13970 receive_seq=13970 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=1479 freq=119993175 heater_bed: target=80 temp=80.1 pwm=0.445 sd_pos=71052 sysload=0.17 cputime=56.863 memavail=7290624 print_time=2010.951 buffer_time=2.593 print_stall=0 extruder: target=240 temp=240.1 pwm=0.253
Stats 796785.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=559119 bytes_read=353144 bytes_retransmit=9 bytes_invalid=0 send_seq=14018 receive_seq=14018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119993170 heater_bed: target=80 temp=80.1 pwm=0.378 sd_pos=71138 sysload=0.17 cputime=56.928 memavail=7290624 print_time=2011.487 buffer_time=2.128 print_stall=0 extruder: target=240 temp=240.1 pwm=0.230
Stats 796786.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=561039 bytes_read=353646 bytes_retransmit=9 bytes_invalid=0 send_seq=14057 receive_seq=14057 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993188 heater_bed: target=80 temp=80.0 pwm=0.506 sd_pos=71308 sysload=0.17 cputime=56.986 memavail=7290628 print_time=2012.541 buffer_time=2.182 print_stall=0 extruder: target=240 temp=240.0 pwm=0.373
Stats 796787.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=562117 bytes_read=354054 bytes_retransmit=9 bytes_invalid=0 send_seq=14083 receive_seq=14083 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993186 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=71395 sysload=0.17 cputime=57.045 memavail=7290404 print_time=2013.381 buffer_time=2.021 print_stall=0 extruder: target=240 temp=240.0 pwm=0.345
Stats 796788.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=563437 bytes_read=354487 bytes_retransmit=9 bytes_invalid=0 send_seq=14114 receive_seq=14114 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993179 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=71453 sysload=0.16 cputime=57.108 memavail=7290404 print_time=2014.487 buffer_time=2.127 print_stall=0 extruder: target=240 temp=240.0 pwm=0.279
Stats 796789.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=569476 bytes_read=355334 bytes_retransmit=9 bytes_invalid=0 send_seq=14222 receive_seq=14222 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993174 heater_bed: target=80 temp=79.9 pwm=0.547 sd_pos=72166 sysload=0.16 cputime=57.177 memavail=7290404 print_time=2016.014 buffer_time=2.653 print_stall=0 extruder: target=240 temp=240.0 pwm=0.276
Stats 796790.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=572190 bytes_read=355908 bytes_retransmit=9 bytes_invalid=0 send_seq=14278 receive_seq=14278 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993173 heater_bed: target=80 temp=79.9 pwm=0.482 sd_pos=72339 sysload=0.16 cputime=57.230 memavail=7290404 print_time=2016.552 buffer_time=2.191 print_stall=0 extruder: target=240 temp=240.0 pwm=0.307
Stats 796791.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=575819 bytes_read=356511 bytes_retransmit=9 bytes_invalid=0 send_seq=14343 receive_seq=14343 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=1796 freq=119993172 heater_bed: target=80 temp=79.9 pwm=0.482 sd_pos=72975 sysload=0.16 cputime=57.310 memavail=7290404 print_time=2017.819 buffer_time=2.457 print_stall=0 extruder: target=240 temp=240.2 pwm=0.208
Stats 796792.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=580636 bytes_read=357243 bytes_retransmit=9 bytes_invalid=0 send_seq=14428 receive_seq=14428 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=35 freq=119993164 heater_bed: target=80 temp=79.9 pwm=0.422 sd_pos=73132 sysload=0.16 cputime=57.404 memavail=7290404 print_time=2018.436 buffer_time=2.073 print_stall=0 extruder: target=240 temp=239.9 pwm=0.330
Stats 796793.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=585050 bytes_read=357906 bytes_retransmit=9 bytes_invalid=0 send_seq=14505 receive_seq=14505 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=1378 freq=119993161 heater_bed: target=80 temp=79.8 pwm=0.535 sd_pos=73450 sysload=0.15 cputime=57.490 memavail=7290404 print_time=2019.686 buffer_time=2.322 print_stall=0 extruder: target=240 temp=239.6 pwm=0.409
Stats 796794.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=589601 bytes_read=358584 bytes_retransmit=9 bytes_invalid=0 send_seq=14585 receive_seq=14585 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=2844 freq=119993156 heater_bed: target=80 temp=79.8 pwm=0.469 sd_pos=73773 sysload=0.15 cputime=57.583 memavail=7290404 print_time=2020.936 buffer_time=2.571 print_stall=0 extruder: target=240 temp=239.4 pwm=0.460
Stats 796795.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=594404 bytes_read=359327 bytes_retransmit=9 bytes_invalid=0 send_seq=14669 receive_seq=14669 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=1782 freq=119993154 heater_bed: target=80 temp=79.8 pwm=0.484 sd_pos=74247 sysload=0.15 cputime=57.683 memavail=7289900 print_time=2021.707 buffer_time=2.341 print_stall=0 extruder: target=240 temp=239.9 pwm=0.220
Stats 796796.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=599319 bytes_read=360030 bytes_retransmit=9 bytes_invalid=0 send_seq=14754 receive_seq=14754 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=497 freq=119993147 heater_bed: target=80 temp=79.8 pwm=0.478 sd_pos=74814 sysload=0.15 cputime=57.781 memavail=7289904 print_time=2022.370 buffer_time=2.003 print_stall=0 extruder: target=240 temp=239.8 pwm=0.317
Stats 796797.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=603451 bytes_read=360673 bytes_retransmit=9 bytes_invalid=0 send_seq=14827 receive_seq=14827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119993140 heater_bed: target=80 temp=79.8 pwm=0.453 sd_pos=75205 sysload=0.15 cputime=57.868 memavail=7289904 print_time=2023.888 buffer_time=2.520 print_stall=0 extruder: target=240 temp=240.1 pwm=0.172
Stats 796798.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=605658 bytes_read=361215 bytes_retransmit=9 bytes_invalid=0 send_seq=14874 receive_seq=14874 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993141 heater_bed: target=80 temp=79.8 pwm=0.517 sd_pos=75444 sysload=0.13 cputime=57.939 memavail=7289904 print_time=2025.432 buffer_time=3.065 print_stall=0 extruder: target=240 temp=239.7 pwm=0.440
Stats 796799.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=605884 bytes_read=361568 bytes_retransmit=9 bytes_invalid=0 send_seq=14889 receive_seq=14889 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993137 heater_bed: target=80 temp=79.8 pwm=0.371 sd_pos=75444 sysload=0.13 cputime=57.997 memavail=7289904 print_time=2025.432 buffer_time=2.064 print_stall=0 extruder: target=240 temp=239.7 pwm=0.372
Stats 796800.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=609020 bytes_read=362172 bytes_retransmit=9 bytes_invalid=0 send_seq=14951 receive_seq=14951 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119993137 heater_bed: target=80 temp=79.8 pwm=0.538 sd_pos=75944 sysload=0.13 cputime=58.065 memavail=7289904 print_time=2027.187 buffer_time=2.817 print_stall=0 extruder: target=240 temp=239.6 pwm=0.433
Stats 796801.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=609987 bytes_read=362609 bytes_retransmit=9 bytes_invalid=0 send_seq=14977 receive_seq=14977 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119993134 heater_bed: target=80 temp=79.7 pwm=0.530 sd_pos=75944 sysload=0.13 cputime=58.121 memavail=7289904 print_time=2027.503 buffer_time=2.132 print_stall=0 extruder: target=240 temp=239.6 pwm=0.366
Stats 796802.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=610837 bytes_read=362997 bytes_retransmit=9 bytes_invalid=0 send_seq=14999 receive_seq=14999 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993135 heater_bed: target=80 temp=79.7 pwm=0.479 sd_pos=76088 sysload=0.13 cputime=58.180 memavail=7289904 print_time=2028.956 buffer_time=2.585 print_stall=0 extruder: target=240 temp=239.8 pwm=0.304
Stats 796803.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=614031 bytes_read=363585 bytes_retransmit=9 bytes_invalid=0 send_seq=15061 receive_seq=15061 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119993133 heater_bed: target=80 temp=79.7 pwm=0.539 sd_pos=76552 sysload=0.12 cputime=58.247 memavail=7289680 print_time=2030.310 buffer_time=2.937 print_stall=0 extruder: target=240 temp=239.8 pwm=0.366
Stats 796804.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=614207 bytes_read=363952 bytes_retransmit=9 bytes_invalid=0 send_seq=15073 receive_seq=15073 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993183 heater_bed: target=80 temp=79.7 pwm=0.437 sd_pos=76580 sysload=0.12 cputime=58.310 memavail=7289680 print_time=2030.310 buffer_time=1.937 print_stall=0 extruder: target=240 temp=239.6 pwm=0.443
Stats 796805.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=616664 bytes_read=364495 bytes_retransmit=9 bytes_invalid=0 send_seq=15123 receive_seq=15123 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993177 heater_bed: target=80 temp=79.7 pwm=0.522 sd_pos=77141 sysload=0.12 cputime=58.397 memavail=7291044 print_time=2031.455 buffer_time=2.080 print_stall=0 extruder: target=240 temp=239.5 pwm=0.443
Stats 796806.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=619146 bytes_read=365023 bytes_retransmit=9 bytes_invalid=0 send_seq=15173 receive_seq=15173 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993171 heater_bed: target=80 temp=79.7 pwm=0.467 sd_pos=77800 sysload=0.12 cputime=58.470 memavail=7291164 print_time=2032.715 buffer_time=2.339 print_stall=0 extruder: target=240 temp=239.6 pwm=0.399
Stats 796807.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=622944 bytes_read=365685 bytes_retransmit=9 bytes_invalid=0 send_seq=15244 receive_seq=15244 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119993165 heater_bed: target=80 temp=79.6 pwm=0.533 sd_pos=78648 sysload=0.12 cputime=58.550 memavail=7291164 print_time=2034.162 buffer_time=2.785 print_stall=0 extruder: target=240 temp=239.7 pwm=0.359
Stats 796808.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=625939 bytes_read=366253 bytes_retransmit=9 bytes_invalid=0 send_seq=15302 receive_seq=15302 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993164 heater_bed: target=80 temp=79.7 pwm=0.421 sd_pos=78869 sysload=0.11 cputime=58.608 memavail=7291164 print_time=2034.756 buffer_time=2.378 print_stall=0 extruder: target=240 temp=239.8 pwm=0.366
Stats 796809.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=629886 bytes_read=366921 bytes_retransmit=9 bytes_invalid=0 send_seq=15377 receive_seq=15377 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=251 freq=119993159 heater_bed: target=80 temp=79.6 pwm=0.602 sd_pos=79148 sysload=0.11 cputime=58.672 memavail=7293848 print_time=2035.769 buffer_time=2.391 print_stall=0 extruder: target=240 temp=240.2 pwm=0.220
Stats 796810.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=633744 bytes_read=367579 bytes_retransmit=9 bytes_invalid=0 send_seq=15447 receive_seq=15447 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=1835 freq=119993149 heater_bed: target=80 temp=79.6 pwm=0.521 sd_pos=80191 sysload=0.11 cputime=58.764 memavail=7293848 print_time=2037.135 buffer_time=2.755 print_stall=0 extruder: target=240 temp=240.0 pwm=0.311
Stats 796811.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=638285 bytes_read=368257 bytes_retransmit=9 bytes_invalid=0 send_seq=15527 receive_seq=15527 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=526 freq=119993145 heater_bed: target=80 temp=79.6 pwm=0.521 sd_pos=80939 sysload=0.11 cputime=58.853 memavail=7293848 print_time=2037.875 buffer_time=2.494 print_stall=0 extruder: target=240 temp=239.9 pwm=0.310
Stats 796812.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=641470 bytes_read=368850 bytes_retransmit=9 bytes_invalid=0 send_seq=15587 receive_seq=15587 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119993137 heater_bed: target=80 temp=79.6 pwm=0.496 sd_pos=81107 sysload=0.11 cputime=58.920 memavail=7293848 print_time=2038.419 buffer_time=2.038 print_stall=0 extruder: target=240 temp=240.0 pwm=0.361
Stats 796813.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=646536 bytes_read=369587 bytes_retransmit=9 bytes_invalid=0 send_seq=15676 receive_seq=15676 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=148 freq=119993134 heater_bed: target=80 temp=79.6 pwm=0.553 sd_pos=81447 sysload=0.18 cputime=58.995 memavail=7293848 print_time=2039.744 buffer_time=2.361 print_stall=0 extruder: target=240 temp=239.5 pwm=0.544
Stats 796814.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=650503 bytes_read=370225 bytes_retransmit=9 bytes_invalid=0 send_seq=15748 receive_seq=15748 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119993131 heater_bed: target=80 temp=79.6 pwm=0.614 sd_pos=81971 sysload=0.18 cputime=59.063 memavail=7293624 print_time=2040.836 buffer_time=2.453 print_stall=0 extruder: target=240 temp=239.7 pwm=0.418
Stats 796815.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=654113 bytes_read=370873 bytes_retransmit=9 bytes_invalid=0 send_seq=15816 receive_seq=15816 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993128 heater_bed: target=80 temp=79.6 pwm=0.560 sd_pos=82200 sysload=0.18 cputime=59.133 memavail=7292872 print_time=2041.858 buffer_time=2.473 print_stall=0 extruder: target=240 temp=240.0 pwm=0.329
Stats 796816.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=657906 bytes_read=371522 bytes_retransmit=9 bytes_invalid=0 send_seq=15889 receive_seq=15889 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119993133 heater_bed: target=80 temp=79.6 pwm=0.477 sd_pos=82429 sysload=0.18 cputime=59.195 memavail=7292872 print_time=2042.857 buffer_time=2.473 print_stall=0 extruder: target=240 temp=239.8 pwm=0.462
Stats 796817.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=661919 bytes_read=372168 bytes_retransmit=9 bytes_invalid=0 send_seq=15965 receive_seq=15964 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=170 freq=119993147 heater_bed: target=80 temp=79.6 pwm=0.477 sd_pos=82657 sysload=0.18 cputime=59.257 memavail=7292584 print_time=2043.918 buffer_time=2.532 print_stall=0 extruder: target=240 temp=240.0 pwm=0.332
Stats 796818.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=665228 bytes_read=372775 bytes_retransmit=9 bytes_invalid=0 send_seq=16027 receive_seq=16027 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993138 heater_bed: target=80 temp=79.6 pwm=0.554 sd_pos=82832 sysload=0.17 cputime=59.324 memavail=7292680 print_time=2044.710 buffer_time=2.324 print_stall=0 extruder: target=240 temp=240.1 pwm=0.393
Stats 796819.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=669465 bytes_read=373447 bytes_retransmit=9 bytes_invalid=0 send_seq=16103 receive_seq=16103 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1012 freq=119993127 heater_bed: target=80 temp=79.6 pwm=0.496 sd_pos=83164 sysload=0.17 cputime=59.404 memavail=7292680 print_time=2045.907 buffer_time=2.520 print_stall=0 extruder: target=240 temp=240.1 pwm=0.297
Stats 796820.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=673209 bytes_read=374081 bytes_retransmit=9 bytes_invalid=0 send_seq=16171 receive_seq=16171 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119993131 heater_bed: target=80 temp=79.6 pwm=0.496 sd_pos=83328 sysload=0.17 cputime=59.480 memavail=7292680 print_time=2046.498 buffer_time=2.110 print_stall=0 extruder: target=240 temp=240.0 pwm=0.381
Stats 796821.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=677753 bytes_read=374769 bytes_retransmit=9 bytes_invalid=0 send_seq=16250 receive_seq=16250 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=639 freq=119993130 heater_bed: target=80 temp=79.6 pwm=0.445 sd_pos=83661 sysload=0.17 cputime=59.571 memavail=7292680 print_time=2047.695 buffer_time=2.307 print_stall=0 extruder: target=240 temp=240.0 pwm=0.348
Stats 796822.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=682211 bytes_read=375456 bytes_retransmit=9 bytes_invalid=0 send_seq=16329 receive_seq=16329 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=342 freq=119993127 heater_bed: target=80 temp=79.6 pwm=0.563 sd_pos=84454 sysload=0.17 cputime=59.659 memavail=7292680 print_time=2048.698 buffer_time=2.309 print_stall=0 extruder: target=240 temp=240.0 pwm=0.403
Stats 796823.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=686635 bytes_read=376124 bytes_retransmit=9 bytes_invalid=0 send_seq=16407 receive_seq=16407 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=1305 freq=119993126 heater_bed: target=80 temp=79.7 pwm=0.445 sd_pos=85152 sysload=0.24 cputime=59.745 memavail=7292616 print_time=2049.891 buffer_time=2.501 print_stall=0 extruder: target=240 temp=239.9 pwm=0.390
Stats 796824.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=690773 bytes_read=376787 bytes_retransmit=9 bytes_invalid=0 send_seq=16481 receive_seq=16481 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=1160 freq=119993120 heater_bed: target=80 temp=79.7 pwm=0.440 sd_pos=86061 sysload=0.24 cputime=59.847 memavail=7292712 print_time=2050.804 buffer_time=2.414 print_stall=0 extruder: target=240 temp=239.6 pwm=0.543
Stats 796825.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=695113 bytes_read=377465 bytes_retransmit=9 bytes_invalid=0 send_seq=16555 receive_seq=16555 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=102 freq=119993122 heater_bed: target=80 temp=79.7 pwm=0.453 sd_pos=86415 sysload=0.24 cputime=59.941 memavail=7292904 print_time=2051.804 buffer_time=2.413 print_stall=0 extruder: target=240 temp=240.0 pwm=0.392
Stats 796826.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=697330 bytes_read=377968 bytes_retransmit=9 bytes_invalid=0 send_seq=16600 receive_seq=16600 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119993177 heater_bed: target=80 temp=79.7 pwm=0.432 sd_pos=86540 sysload=0.24 cputime=60.003 memavail=7292968 print_time=2052.653 buffer_time=2.261 print_stall=0 extruder: target=240 temp=239.9 pwm=0.392
Stats 796827.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=699390 bytes_read=378471 bytes_retransmit=9 bytes_invalid=0 send_seq=16642 receive_seq=16642 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993171 heater_bed: target=80 temp=79.7 pwm=0.513 sd_pos=86651 sysload=0.24 cputime=60.058 memavail=7292968 print_time=2053.431 buffer_time=2.038 print_stall=0 extruder: target=240 temp=239.9 pwm=0.392
Stats 796828.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=702300 bytes_read=379053 bytes_retransmit=9 bytes_invalid=0 send_seq=16700 receive_seq=16700 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993168 heater_bed: target=80 temp=79.7 pwm=0.576 sd_pos=86819 sysload=0.38 cputime=60.118 memavail=7292968 print_time=2054.418 buffer_time=2.024 print_stall=0 extruder: target=240 temp=240.1 pwm=0.376
Stats 796829.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=707359 bytes_read=379806 bytes_retransmit=9 bytes_invalid=0 send_seq=16795 receive_seq=16795 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119993157 heater_bed: target=80 temp=79.7 pwm=0.511 sd_pos=87102 sysload=0.38 cputime=60.185 memavail=7292968 print_time=2055.789 buffer_time=2.394 print_stall=0 extruder: target=240 temp=240.3 pwm=0.298
Stats 796830.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=711554 bytes_read=380495 bytes_retransmit=9 bytes_invalid=0 send_seq=16871 receive_seq=16871 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=2193 freq=119993151 heater_bed: target=80 temp=79.7 pwm=0.460 sd_pos=87953 sysload=0.38 cputime=60.261 memavail=7292744 print_time=2057.204 buffer_time=2.798 print_stall=0 extruder: target=240 temp=239.9 pwm=0.499
Stats 796831.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=715260 bytes_read=381112 bytes_retransmit=9 bytes_invalid=0 send_seq=16936 receive_seq=16936 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993151 heater_bed: target=80 temp=79.7 pwm=0.513 sd_pos=88061 sysload=0.38 cputime=60.330 memavail=7292744 print_time=2057.929 buffer_time=2.523 print_stall=0 extruder: target=240 temp=239.8 pwm=0.471
Stats 796832.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=716196 bytes_read=381505 bytes_retransmit=9 bytes_invalid=0 send_seq=16959 receive_seq=16959 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993143 heater_bed: target=80 temp=79.7 pwm=0.513 sd_pos=88120 sysload=0.38 cputime=60.377 memavail=7292744 print_time=2058.702 buffer_time=2.295 print_stall=0 extruder: target=240 temp=239.8 pwm=0.471
Stats 796833.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=717898 bytes_read=381973 bytes_retransmit=9 bytes_invalid=0 send_seq=16994 receive_seq=16994 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993136 heater_bed: target=80 temp=79.7 pwm=0.570 sd_pos=88290 sysload=0.43 cputime=60.433 memavail=7292744 print_time=2059.609 buffer_time=2.201 print_stall=0 extruder: target=240 temp=239.7 pwm=0.475
Stats 796834.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=719122 bytes_read=382426 bytes_retransmit=9 bytes_invalid=0 send_seq=17023 receive_seq=17023 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993131 heater_bed: target=80 temp=79.7 pwm=0.506 sd_pos=88319 sysload=0.43 cputime=60.500 memavail=7292136 print_time=2060.508 buffer_time=2.100 print_stall=0 extruder: target=240 temp=240.0 pwm=0.347
Stats 796835.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=721962 bytes_read=382984 bytes_retransmit=9 bytes_invalid=0 send_seq=17079 receive_seq=17079 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993131 heater_bed: target=80 temp=79.7 pwm=0.571 sd_pos=88583 sysload=0.43 cputime=60.573 memavail=7292216 print_time=2061.666 buffer_time=2.257 print_stall=0 extruder: target=240 temp=240.0 pwm=0.415
Stats 796836.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=727400 bytes_read=383772 bytes_retransmit=9 bytes_invalid=0 send_seq=17178 receive_seq=17178 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119993123 heater_bed: target=80 temp=79.6 pwm=0.673 sd_pos=89340 sysload=0.43 cputime=60.635 memavail=7292216 print_time=2062.957 buffer_time=2.547 print_stall=0 extruder: target=240 temp=239.9 pwm=0.464
Stats 796837.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=730178 bytes_read=384339 bytes_retransmit=9 bytes_invalid=0 send_seq=17233 receive_seq=17233 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993113 heater_bed: target=80 temp=79.6 pwm=0.541 sd_pos=89511 sysload=0.43 cputime=60.700 memavail=7292216 print_time=2063.574 buffer_time=2.164 print_stall=0 extruder: target=240 temp=239.9 pwm=0.468
Stats 796838.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=734555 bytes_read=385012 bytes_retransmit=9 bytes_invalid=0 send_seq=17312 receive_seq=17312 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=1091 freq=119993106 heater_bed: target=80 temp=79.6 pwm=0.604 sd_pos=89857 sysload=0.39 cputime=60.762 memavail=7292216 print_time=2064.824 buffer_time=2.413 print_stall=0 extruder: target=240 temp=239.7 pwm=0.468
Stats 796839.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=738705 bytes_read=385696 bytes_retransmit=9 bytes_invalid=0 send_seq=17387 receive_seq=17387 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=58 freq=119993099 heater_bed: target=80 temp=79.6 pwm=0.534 sd_pos=90021 sysload=0.39 cputime=60.850 memavail=7292216 print_time=2065.457 buffer_time=2.046 print_stall=0 extruder: target=240 temp=239.5 pwm=0.537
Stats 796840.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=743072 bytes_read=386368 bytes_retransmit=9 bytes_invalid=0 send_seq=17463 receive_seq=17463 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=1518 freq=119993102 heater_bed: target=80 temp=79.6 pwm=0.630 sd_pos=90343 sysload=0.39 cputime=60.937 memavail=7292216 print_time=2066.707 buffer_time=2.295 print_stall=0 extruder: target=240 temp=239.5 pwm=0.553
Stats 796841.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=747771 bytes_read=387051 bytes_retransmit=9 bytes_invalid=0 send_seq=17544 receive_seq=17544 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=3384 freq=119993103 heater_bed: target=80 temp=79.6 pwm=0.563 sd_pos=90724 sysload=0.39 cputime=61.036 memavail=7292216 print_time=2067.946 buffer_time=2.533 print_stall=0 extruder: target=240 temp=239.5 pwm=0.551
Stats 796842.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=752630 bytes_read=387764 bytes_retransmit=9 bytes_invalid=0 send_seq=17628 receive_seq=17628 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1897 freq=119993097 heater_bed: target=80 temp=79.6 pwm=0.560 sd_pos=91091 sysload=0.39 cputime=61.126 memavail=7292216 print_time=2068.488 buffer_time=2.074 print_stall=0 extruder: target=240 temp=239.6 pwm=0.475
Stats 796843.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=757847 bytes_read=388516 bytes_retransmit=9 bytes_invalid=0 send_seq=17720 receive_seq=17720 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=255 freq=119993090 heater_bed: target=80 temp=79.6 pwm=0.560 sd_pos=91452 sysload=0.36 cputime=61.237 memavail=7292216 print_time=2069.943 buffer_time=2.529 print_stall=0 extruder: target=240 temp=239.7 pwm=0.475
Stats 796844.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=760123 bytes_read=389051 bytes_retransmit=9 bytes_invalid=0 send_seq=17766 receive_seq=17766 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993108 heater_bed: target=80 temp=79.6 pwm=0.543 sd_pos=91672 sysload=0.36 cputime=61.295 memavail=7292216 print_time=2071.490 buffer_time=3.075 print_stall=0 extruder: target=240 temp=240.0 pwm=0.313
Stats 796845.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=760323 bytes_read=389409 bytes_retransmit=9 bytes_invalid=0 send_seq=17779 receive_seq=17779 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993111 heater_bed: target=80 temp=79.6 pwm=0.486 sd_pos=91672 sysload=0.36 cputime=61.343 memavail=7291488 print_time=2071.490 buffer_time=2.074 print_stall=0 extruder: target=240 temp=239.4 pwm=0.575
Stats 796846.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=763448 bytes_read=390001 bytes_retransmit=9 bytes_invalid=0 send_seq=17839 receive_seq=17839 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993108 heater_bed: target=80 temp=79.6 pwm=0.502 sd_pos=92144 sysload=0.36 cputime=61.440 memavail=7291940 print_time=2073.200 buffer_time=2.783 print_stall=0 extruder: target=240 temp=239.8 pwm=0.393
Stats 796847.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=764165 bytes_read=390389 bytes_retransmit=9 bytes_invalid=0 send_seq=17861 receive_seq=17861 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993103 heater_bed: target=80 temp=79.6 pwm=0.647 sd_pos=92144 sysload=0.36 cputime=61.494 memavail=7291940 print_time=2073.527 buffer_time=2.108 print_stall=0 extruder: target=240 temp=239.9 pwm=0.391
Stats 796848.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=765059 bytes_read=390792 bytes_retransmit=9 bytes_invalid=0 send_seq=17883 receive_seq=17883 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993157 heater_bed: target=80 temp=79.6 pwm=0.570 sd_pos=92288 sysload=0.33 cputime=61.558 memavail=7291716 print_time=2074.994 buffer_time=2.575 print_stall=0 extruder: target=240 temp=239.8 pwm=0.475
Stats 796849.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=768617 bytes_read=391444 bytes_retransmit=9 bytes_invalid=0 send_seq=17952 receive_seq=17952 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993152 heater_bed: target=80 temp=79.6 pwm=0.503 sd_pos=92775 sysload=0.33 cputime=61.635 memavail=7291716 print_time=2076.416 buffer_time=2.995 print_stall=0 extruder: target=240 temp=239.8 pwm=0.457
Stats 796850.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=769206 bytes_read=391782 bytes_retransmit=9 bytes_invalid=0 send_seq=17971 receive_seq=17964 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119993138 heater_bed: target=80 temp=79.6 pwm=0.576 sd_pos=92886 sysload=0.33 cputime=61.699 memavail=7291716 print_time=2076.666 buffer_time=2.238 print_stall=0 extruder: target=240 temp=239.6 pwm=0.578
Stats 796851.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=771047 bytes_read=392302 bytes_retransmit=9 bytes_invalid=0 send_seq=18011 receive_seq=18010 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993132 heater_bed: target=80 temp=79.6 pwm=0.572 sd_pos=93331 sysload=0.33 cputime=61.766 memavail=7291716 print_time=2077.511 buffer_time=2.082 print_stall=0 extruder: target=240 temp=239.8 pwm=0.451
Stats 796852.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=773432 bytes_read=392836 bytes_retransmit=9 bytes_invalid=0 send_seq=18060 receive_seq=18060 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993126 heater_bed: target=80 temp=79.6 pwm=0.542 sd_pos=93997 sysload=0.33 cputime=61.836 memavail=7291716 print_time=2078.731 buffer_time=2.300 print_stall=0 extruder: target=240 temp=239.8 pwm=0.524
Stats 796853.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=775606 bytes_read=393322 bytes_retransmit=9 bytes_invalid=0 send_seq=18103 receive_seq=18103 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993121 heater_bed: target=80 temp=79.6 pwm=0.542 sd_pos=94427 sysload=0.39 cputime=61.899 memavail=7291716 print_time=2079.771 buffer_time=2.340 print_stall=0 extruder: target=240 temp=239.7 pwm=0.524
Stats 796854.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=779317 bytes_read=393965 bytes_retransmit=9 bytes_invalid=0 send_seq=18173 receive_seq=18173 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993117 heater_bed: target=80 temp=79.6 pwm=0.542 sd_pos=94899 sysload=0.39 cputime=61.969 memavail=7291716 print_time=2080.680 buffer_time=2.248 print_stall=0 extruder: target=240 temp=239.9 pwm=0.421
Stats 796855.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=783904 bytes_read=394698 bytes_retransmit=9 bytes_invalid=0 send_seq=18258 receive_seq=18258 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993113 heater_bed: target=80 temp=79.6 pwm=0.557 sd_pos=95188 sysload=0.39 cputime=62.038 memavail=7292220 print_time=2081.759 buffer_time=2.327 print_stall=0 extruder: target=240 temp=239.9 pwm=0.448
Stats 796856.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=787016 bytes_read=395266 bytes_retransmit=9 bytes_invalid=0 send_seq=18316 receive_seq=18316 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119993155 heater_bed: target=80 temp=79.6 pwm=0.557 sd_pos=95357 sysload=0.39 cputime=62.111 memavail=7292220 print_time=2082.666 buffer_time=2.232 print_stall=0 extruder: target=240 temp=239.9 pwm=0.466
Stats 796857.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=790096 bytes_read=395859 bytes_retransmit=9 bytes_invalid=0 send_seq=18376 receive_seq=18376 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993145 heater_bed: target=80 temp=79.6 pwm=0.617 sd_pos=95525 sysload=0.39 cputime=62.179 memavail=7292220 print_time=2083.684 buffer_time=2.250 print_stall=0 extruder: target=240 temp=239.9 pwm=0.527
Stats 796858.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=792248 bytes_read=396371 bytes_retransmit=9 bytes_invalid=0 send_seq=18420 receive_seq=18420 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993133 heater_bed: target=80 temp=79.6 pwm=0.582 sd_pos=95639 sysload=0.43 cputime=62.236 memavail=7291996 print_time=2084.451 buffer_time=2.016 print_stall=0 extruder: target=240 temp=240.0 pwm=0.445
Stats 796859.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=795425 bytes_read=396959 bytes_retransmit=9 bytes_invalid=0 send_seq=18482 receive_seq=18482 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119993124 heater_bed: target=80 temp=79.6 pwm=0.582 sd_pos=96001 sysload=0.43 cputime=62.305 memavail=7291996 print_time=2085.734 buffer_time=2.298 print_stall=0 extruder: target=240 temp=239.9 pwm=0.507
Stats 796860.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=799384 bytes_read=397648 bytes_retransmit=9 bytes_invalid=0 send_seq=18558 receive_seq=18558 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993133 heater_bed: target=80 temp=79.6 pwm=0.526 sd_pos=96356 sysload=0.43 cputime=62.371 memavail=7291996 print_time=2086.679 buffer_time=2.243 print_stall=0 extruder: target=240 temp=239.9 pwm=0.464
Stats 796861.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=804267 bytes_read=398385 bytes_retransmit=9 bytes_invalid=0 send_seq=18647 receive_seq=18647 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1174 freq=119993124 heater_bed: target=80 temp=79.6 pwm=0.610 sd_pos=97304 sysload=0.43 cputime=62.460 memavail=7291996 print_time=2088.017 buffer_time=2.580 print_stall=0 extruder: target=240 temp=239.9 pwm=0.495
Stats 796862.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=807609 bytes_read=398973 bytes_retransmit=9 bytes_invalid=0 send_seq=18709 receive_seq=18709 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=2838 freq=119993122 heater_bed: target=80 temp=79.6 pwm=0.692 sd_pos=97872 sysload=0.43 cputime=62.545 memavail=7291996 print_time=2089.174 buffer_time=2.733 print_stall=0 extruder: target=240 temp=239.9 pwm=0.504
Stats 796863.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=812342 bytes_read=399676 bytes_retransmit=9 bytes_invalid=0 send_seq=18791 receive_seq=18791 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1754 freq=119993115 heater_bed: target=80 temp=79.5 pwm=0.776 sd_pos=98715 sysload=0.56 cputime=62.646 memavail=7291996 print_time=2089.951 buffer_time=2.509 print_stall=0 extruder: target=240 temp=239.7 pwm=0.547
Stats 796864.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=817081 bytes_read=400373 bytes_retransmit=9 bytes_invalid=0 send_seq=18872 receive_seq=18872 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=252 freq=119993112 heater_bed: target=80 temp=79.4 pwm=0.776 sd_pos=98879 sysload=0.56 cputime=62.738 memavail=7291972 print_time=2090.558 buffer_time=2.115 print_stall=0 extruder: target=240 temp=239.8 pwm=0.430
Stats 796865.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=821299 bytes_read=401037 bytes_retransmit=9 bytes_invalid=0 send_seq=18946 receive_seq=18946 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=1913 freq=119993141 heater_bed: target=80 temp=79.4 pwm=0.707 sd_pos=99211 sysload=0.56 cputime=62.832 memavail=7291720 print_time=2091.755 buffer_time=2.311 print_stall=0 extruder: target=240 temp=239.9 pwm=0.434
Stats 796866.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=826051 bytes_read=401745 bytes_retransmit=9 bytes_invalid=0 send_seq=19029 receive_seq=19029 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=3104 freq=119993136 heater_bed: target=80 temp=79.4 pwm=0.705 sd_pos=99544 sysload=0.56 cputime=62.933 memavail=7291720 print_time=2092.952 buffer_time=2.507 print_stall=0 extruder: target=240 temp=240.1 pwm=0.353
Stats 796867.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=831139 bytes_read=402477 bytes_retransmit=9 bytes_invalid=0 send_seq=19117 receive_seq=19117 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1512 freq=119993126 heater_bed: target=80 temp=79.4 pwm=0.606 sd_pos=99710 sysload=0.56 cputime=63.023 memavail=7291720 print_time=2093.603 buffer_time=2.158 print_stall=0 extruder: target=240 temp=239.9 pwm=0.512
Stats 796868.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=836317 bytes_read=403200 bytes_retransmit=9 bytes_invalid=0 send_seq=19206 receive_seq=19206 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=550 freq=119993115 heater_bed: target=80 temp=79.4 pwm=0.570 sd_pos=100682 sysload=0.52 cputime=63.123 memavail=7291720 print_time=2094.579 buffer_time=2.134 print_stall=0 extruder: target=240 temp=240.0 pwm=0.452
Stats 796869.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=840436 bytes_read=403853 bytes_retransmit=9 bytes_invalid=0 send_seq=19278 receive_seq=19278 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993120 heater_bed: target=80 temp=79.4 pwm=0.696 sd_pos=100905 sysload=0.52 cputime=63.209 memavail=7291720 print_time=2095.514 buffer_time=2.068 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 796870.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=844649 bytes_read=404561 bytes_retransmit=9 bytes_invalid=0 send_seq=19358 receive_seq=19358 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993113 heater_bed: target=80 temp=79.5 pwm=0.604 sd_pos=101135 sysload=0.52 cputime=63.285 memavail=7291720 print_time=2096.514 buffer_time=2.067 print_stall=0 extruder: target=240 temp=239.8 pwm=0.549
Stats 796871.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=848795 bytes_read=405224 bytes_retransmit=9 bytes_invalid=0 send_seq=19435 receive_seq=19435 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119993107 heater_bed: target=80 temp=79.5 pwm=0.550 sd_pos=101366 sysload=0.52 cputime=63.358 memavail=7291720 print_time=2097.523 buffer_time=2.076 print_stall=0 extruder: target=240 temp=240.0 pwm=0.431
Stats 796872.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=853592 bytes_read=405937 bytes_retransmit=9 bytes_invalid=0 send_seq=19519 receive_seq=19519 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=614 freq=119993100 heater_bed: target=80 temp=79.5 pwm=0.630 sd_pos=101948 sysload=0.52 cputime=63.429 memavail=7291720 print_time=2098.871 buffer_time=2.423 print_stall=0 extruder: target=240 temp=240.1 pwm=0.478
Stats 796873.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=857233 bytes_read=406564 bytes_retransmit=9 bytes_invalid=0 send_seq=19586 receive_seq=19586 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993092 heater_bed: target=80 temp=79.5 pwm=0.619 sd_pos=102356 sysload=0.47 cputime=63.496 memavail=7291720 print_time=2099.478 buffer_time=2.029 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 796874.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=862157 bytes_read=407293 bytes_retransmit=9 bytes_invalid=0 send_seq=19673 receive_seq=19673 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=83 freq=119993148 heater_bed: target=80 temp=79.6 pwm=0.546 sd_pos=102631 sysload=0.47 cputime=63.589 memavail=7291720 print_time=2100.489 buffer_time=2.039 print_stall=0 extruder: target=240 temp=239.9 pwm=0.572
Stats 796875.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=866504 bytes_read=407961 bytes_retransmit=9 bytes_invalid=0 send_seq=19748 receive_seq=19748 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2079 freq=119993141 heater_bed: target=80 temp=79.6 pwm=0.617 sd_pos=103342 sysload=0.47 cputime=63.684 memavail=7290964 print_time=2101.821 buffer_time=2.371 print_stall=0 extruder: target=240 temp=240.0 pwm=0.462
Stats 796876.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=871425 bytes_read=408678 bytes_retransmit=9 bytes_invalid=0 send_seq=19833 receive_seq=19833 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=1608 freq=119993131 heater_bed: target=80 temp=79.6 pwm=0.564 sd_pos=103800 sysload=0.47 cputime=63.779 memavail=7290968 print_time=2102.829 buffer_time=2.379 print_stall=0 extruder: target=240 temp=239.8 pwm=0.561
Stats 796877.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=876363 bytes_read=409386 bytes_retransmit=9 bytes_invalid=0 send_seq=19919 receive_seq=19919 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=3289 freq=119993125 heater_bed: target=80 temp=79.6 pwm=0.568 sd_pos=104219 sysload=0.47 cputime=63.870 memavail=7290744 print_time=2104.108 buffer_time=2.657 print_stall=0 extruder: target=240 temp=240.0 pwm=0.447
Stats 796878.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=880926 bytes_read=410079 bytes_retransmit=9 bytes_invalid=0 send_seq=19999 receive_seq=19999 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2030 freq=119993127 heater_bed: target=80 temp=79.6 pwm=0.571 sd_pos=104822 sysload=0.44 cputime=63.957 memavail=7290744 print_time=2105.031 buffer_time=2.580 print_stall=0 extruder: target=240 temp=239.9 pwm=0.480
Stats 796879.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=883872 bytes_read=410636 bytes_retransmit=9 bytes_invalid=0 send_seq=20052 receive_seq=20052 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993115 heater_bed: target=80 temp=79.6 pwm=0.571 sd_pos=104908 sysload=0.44 cputime=64.021 memavail=7290744 print_time=2105.567 buffer_time=2.114 print_stall=0 extruder: target=240 temp=240.3 pwm=0.345
Stats 796880.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=885739 bytes_read=411130 bytes_retransmit=9 bytes_invalid=0 send_seq=20092 receive_seq=20092 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993113 heater_bed: target=80 temp=79.7 pwm=0.510 sd_pos=105079 sysload=0.44 cputime=64.082 memavail=7290744 print_time=2106.621 buffer_time=2.168 print_stall=0 extruder: target=240 temp=240.1 pwm=0.482
Stats 796881.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=886823 bytes_read=411558 bytes_retransmit=9 bytes_invalid=0 send_seq=20119 receive_seq=20119 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993104 heater_bed: target=80 temp=79.7 pwm=0.542 sd_pos=105166 sysload=0.44 cputime=64.137 memavail=7290744 print_time=2107.462 buffer_time=2.009 print_stall=0 extruder: target=240 temp=240.0 pwm=0.544
Stats 796882.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=888176 bytes_read=412005 bytes_retransmit=9 bytes_invalid=0 send_seq=20150 receive_seq=20150 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993094 heater_bed: target=80 temp=79.7 pwm=0.595 sd_pos=105224 sysload=0.44 cputime=64.197 memavail=7290744 print_time=2108.568 buffer_time=2.115 print_stall=0 extruder: target=240 temp=239.9 pwm=0.546
Stats 796883.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=892142 bytes_read=412663 bytes_retransmit=9 bytes_invalid=0 send_seq=20226 receive_seq=20226 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993093 heater_bed: target=80 temp=79.7 pwm=0.648 sd_pos=105939 sysload=0.40 cputime=64.260 memavail=7290744 print_time=2109.503 buffer_time=2.049 print_stall=0 extruder: target=240 temp=239.8 pwm=0.575
Stats 796884.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=897091 bytes_read=413406 bytes_retransmit=9 bytes_invalid=0 send_seq=20316 receive_seq=20316 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=749 freq=119993086 heater_bed: target=80 temp=79.7 pwm=0.645 sd_pos=107119 sysload=0.40 cputime=64.341 memavail=7290520 print_time=2110.605 buffer_time=2.149 print_stall=0 extruder: target=240 temp=240.0 pwm=0.534
Stats 796885.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=901376 bytes_read=414094 bytes_retransmit=9 bytes_invalid=0 send_seq=20392 receive_seq=20392 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=4838 freq=119993079 heater_bed: target=80 temp=79.7 pwm=0.645 sd_pos=108946 sysload=0.40 cputime=64.455 memavail=7289768 print_time=2112.180 buffer_time=2.724 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 796886.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=906543 bytes_read=414812 bytes_retransmit=9 bytes_invalid=0 send_seq=20480 receive_seq=20480 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=2054 freq=119993076 heater_bed: target=80 temp=79.7 pwm=0.645 sd_pos=109152 sysload=0.40 cputime=64.553 memavail=7289768 print_time=2112.861 buffer_time=2.405 print_stall=0 extruder: target=240 temp=240.1 pwm=0.451
Stats 796887.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=910441 bytes_read=415441 bytes_retransmit=9 bytes_invalid=0 send_seq=20548 receive_seq=20548 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993080 heater_bed: target=80 temp=79.7 pwm=0.577 sd_pos=109295 sysload=0.40 cputime=64.637 memavail=7289928 print_time=2113.694 buffer_time=2.236 print_stall=0 extruder: target=240 temp=239.9 pwm=0.551
Stats 796888.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=912509 bytes_read=415950 bytes_retransmit=9 bytes_invalid=0 send_seq=20593 receive_seq=20593 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993073 heater_bed: target=80 temp=79.7 pwm=0.594 sd_pos=109515 sysload=0.45 cputime=64.699 memavail=7290024 print_time=2115.243 buffer_time=2.785 print_stall=0 extruder: target=240 temp=239.8 pwm=0.581
Stats 796889.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=913342 bytes_read=416338 bytes_retransmit=9 bytes_invalid=0 send_seq=20616 receive_seq=20616 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119993064 heater_bed: target=80 temp=79.7 pwm=0.594 sd_pos=109666 sysload=0.45 cputime=64.748 memavail=7290024 print_time=2115.772 buffer_time=2.313 print_stall=0 extruder: target=240 temp=239.9 pwm=0.501
Stats 796890.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=915588 bytes_read=416891 bytes_retransmit=9 bytes_invalid=0 send_seq=20662 receive_seq=20662 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119993060 heater_bed: target=80 temp=79.7 pwm=0.600 sd_pos=109973 sysload=0.45 cputime=64.815 memavail=7290024 print_time=2116.934 buffer_time=2.474 print_stall=0 extruder: target=240 temp=239.9 pwm=0.540
Stats 796891.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=916530 bytes_read=417294 bytes_retransmit=9 bytes_invalid=0 send_seq=20687 receive_seq=20687 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993055 heater_bed: target=80 temp=79.7 pwm=0.631 sd_pos=110032 sysload=0.45 cputime=64.875 memavail=7290024 print_time=2117.838 buffer_time=2.377 print_stall=0 extruder: target=240 temp=240.2 pwm=0.428
Stats 796892.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=917249 bytes_read=417672 bytes_retransmit=9 bytes_invalid=0 send_seq=20707 receive_seq=20707 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993050 heater_bed: target=80 temp=79.8 pwm=0.550 sd_pos=110117 sysload=0.45 cputime=64.925 memavail=7290024 print_time=2118.733 buffer_time=2.271 print_stall=0 extruder: target=240 temp=239.9 pwm=0.497
Stats 796893.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=920471 bytes_read=418294 bytes_retransmit=9 bytes_invalid=0 send_seq=20770 receive_seq=20770 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993046 heater_bed: target=80 temp=79.8 pwm=0.544 sd_pos=110578 sysload=0.41 cputime=64.994 memavail=7290024 print_time=2120.080 buffer_time=2.618 print_stall=0 extruder: target=240 temp=240.1 pwm=0.416
Stats 796894.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=921407 bytes_read=418697 bytes_retransmit=9 bytes_invalid=0 send_seq=20795 receive_seq=20795 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993049 heater_bed: target=80 temp=79.8 pwm=0.544 sd_pos=110690 sysload=0.41 cputime=65.056 memavail=7290236 print_time=2120.393 buffer_time=1.931 print_stall=0 extruder: target=240 temp=240.1 pwm=0.438
Stats 796895.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=924012 bytes_read=419245 bytes_retransmit=9 bytes_invalid=0 send_seq=20846 receive_seq=20846 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993054 heater_bed: target=80 temp=79.8 pwm=0.544 sd_pos=111466 sysload=0.41 cputime=65.130 memavail=7290524 print_time=2121.644 buffer_time=2.181 print_stall=0 extruder: target=240 temp=239.7 pwm=0.618
Stats 796896.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=926163 bytes_read=419777 bytes_retransmit=9 bytes_invalid=0 send_seq=20891 receive_seq=20891 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119993053 heater_bed: target=80 temp=79.8 pwm=0.616 sd_pos=111830 sysload=0.41 cputime=65.202 memavail=7290524 print_time=2122.940 buffer_time=2.475 print_stall=0 extruder: target=240 temp=240.0 pwm=0.442
Stats 796897.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=928785 bytes_read=420320 bytes_retransmit=9 bytes_invalid=0 send_seq=20944 receive_seq=20944 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993049 heater_bed: target=80 temp=79.8 pwm=0.616 sd_pos=112272 sysload=0.41 cputime=65.270 memavail=7290524 print_time=2123.860 buffer_time=2.395 print_stall=0 extruder: target=240 temp=239.7 pwm=0.597
Stats 796898.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=932202 bytes_read=420928 bytes_retransmit=9 bytes_invalid=0 send_seq=21010 receive_seq=21010 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993046 heater_bed: target=80 temp=79.8 pwm=0.675 sd_pos=112784 sysload=0.38 cputime=65.338 memavail=7290524 print_time=2124.559 buffer_time=2.093 print_stall=0 extruder: target=240 temp=240.1 pwm=0.426
Stats 796899.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=936930 bytes_read=421660 bytes_retransmit=9 bytes_invalid=0 send_seq=21095 receive_seq=21095 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1016 freq=119993109 heater_bed: target=80 temp=79.8 pwm=0.657 sd_pos=113708 sysload=0.38 cputime=65.428 memavail=7290524 print_time=2125.935 buffer_time=2.469 print_stall=0 extruder: target=240 temp=240.1 pwm=0.490
Stats 796900.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=940932 bytes_read=422314 bytes_retransmit=9 bytes_invalid=0 send_seq=21167 receive_seq=21167 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119993098 heater_bed: target=80 temp=79.8 pwm=0.573 sd_pos=114108 sysload=0.38 cputime=65.523 memavail=7290524 print_time=2126.664 buffer_time=2.196 print_stall=0 extruder: target=240 temp=240.1 pwm=0.484
Stats 796901.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=945747 bytes_read=423022 bytes_retransmit=9 bytes_invalid=0 send_seq=21253 receive_seq=21253 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1606 freq=119993151 heater_bed: target=80 temp=79.8 pwm=0.655 sd_pos=115410 sysload=0.38 cputime=65.627 memavail=7290524 print_time=2127.839 buffer_time=2.370 print_stall=0 extruder: target=240 temp=240.1 pwm=0.427
Stats 796902.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=949429 bytes_read=423649 bytes_retransmit=9 bytes_invalid=0 send_seq=21317 receive_seq=21317 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1385 freq=119993139 heater_bed: target=80 temp=79.8 pwm=0.661 sd_pos=116047 sysload=0.38 cputime=65.714 memavail=7290524 print_time=2128.471 buffer_time=2.002 print_stall=0 extruder: target=240 temp=240.1 pwm=0.443
Stats 796903.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=954922 bytes_read=424397 bytes_retransmit=9 bytes_invalid=0 send_seq=21411 receive_seq=21411 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=3142 freq=119993128 heater_bed: target=80 temp=79.8 pwm=0.559 sd_pos=117232 sysload=0.35 cputime=65.829 memavail=7290524 print_time=2129.806 buffer_time=2.336 print_stall=0 extruder: target=240 temp=239.9 pwm=0.514
Stats 796904.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=960296 bytes_read=425135 bytes_retransmit=9 bytes_invalid=0 send_seq=21503 receive_seq=21503 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=3871 freq=119993121 heater_bed: target=80 temp=79.8 pwm=0.559 sd_pos=118451 sysload=0.35 cputime=65.945 memavail=7290524 print_time=2130.927 buffer_time=2.457 print_stall=0 extruder: target=240 temp=239.8 pwm=0.585
Stats 796905.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=965959 bytes_read=425959 bytes_retransmit=9 bytes_invalid=0 send_seq=21601 receive_seq=21601 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=1527 freq=119993108 heater_bed: target=80 temp=79.8 pwm=0.673 sd_pos=119107 sysload=0.35 cputime=66.060 memavail=7290532 print_time=2131.509 buffer_time=2.038 print_stall=0 extruder: target=240 temp=240.2 pwm=0.412
Stats 796906.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=971742 bytes_read=426732 bytes_retransmit=9 bytes_invalid=0 send_seq=21700 receive_seq=21700 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2607 freq=119993098 heater_bed: target=80 temp=79.8 pwm=0.635 sd_pos=120494 sysload=0.35 cputime=66.181 memavail=7290532 print_time=2132.726 buffer_time=2.255 print_stall=0 extruder: target=240 temp=240.2 pwm=0.412
Stats 796907.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=976716 bytes_read=427440 bytes_retransmit=9 bytes_invalid=0 send_seq=21786 receive_seq=21786 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=3708 freq=119993093 heater_bed: target=80 temp=79.8 pwm=0.512 sd_pos=121722 sysload=0.35 cputime=66.290 memavail=7290532 print_time=2133.916 buffer_time=2.444 print_stall=0 extruder: target=240 temp=240.0 pwm=0.519
Stats 796908.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=982615 bytes_read=428242 bytes_retransmit=9 bytes_invalid=0 send_seq=21885 receive_seq=21885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1483 freq=119993083 heater_bed: target=80 temp=79.8 pwm=0.616 sd_pos=122266 sysload=0.32 cputime=66.390 memavail=7290532 print_time=2134.519 buffer_time=2.046 print_stall=0 extruder: target=240 temp=240.1 pwm=0.528
Stats 796909.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=987774 bytes_read=428955 bytes_retransmit=9 bytes_invalid=0 send_seq=21972 receive_seq=21972 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993109 heater_bed: target=80 temp=79.8 pwm=0.662 sd_pos=122973 sysload=0.32 cputime=66.506 memavail=7290532 print_time=2135.834 buffer_time=2.361 print_stall=0 extruder: target=240 temp=239.9 pwm=0.528
Stats 796910.9: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=988768 bytes_read=429374 bytes_retransmit=9 bytes_invalid=0 send_seq=21997 receive_seq=21997 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993101 heater_bed: target=80 temp=79.8 pwm=0.568 sd_pos=123032 sysload=0.32 cputime=66.566 memavail=7290532 print_time=2136.607 buffer_time=2.134 print_stall=0 extruder: target=240 temp=239.9 pwm=0.535
Stats 796911.9: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=990481 bytes_read=429866 bytes_retransmit=9 bytes_invalid=0 send_seq=22034 receive_seq=22034 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993093 heater_bed: target=80 temp=79.8 pwm=0.620 sd_pos=123202 sysload=0.32 cputime=66.623 memavail=7290532 print_time=2137.515 buffer_time=2.041 print_stall=0 extruder: target=240 temp=239.8 pwm=0.548
Stats 796912.9: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=992149 bytes_read=430329 bytes_retransmit=9 bytes_invalid=0 send_seq=22071 receive_seq=22071 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993082 heater_bed: target=80 temp=79.8 pwm=0.536 sd_pos=123289 sysload=0.32 cputime=66.674 memavail=7290564 print_time=2138.836 buffer_time=2.361 print_stall=0 extruder: target=240 temp=240.0 pwm=0.497
Stats 796913.9: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=995127 bytes_read=430897 bytes_retransmit=9 bytes_invalid=0 send_seq=22129 receive_seq=22129 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993078 heater_bed: target=80 temp=79.8 pwm=0.607 sd_pos=123569 sysload=0.38 cputime=66.733 memavail=7290564 print_time=2139.697 buffer_time=2.221 print_stall=0 extruder: target=240 temp=240.1 pwm=0.437
Stats 796914.9: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1000895 bytes_read=431719 bytes_retransmit=9 bytes_invalid=0 send_seq=22232 receive_seq=22232 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=576 freq=119993079 heater_bed: target=80 temp=79.8 pwm=0.607 sd_pos=124600 sysload=0.38 cputime=66.807 memavail=7290564 print_time=2140.843 buffer_time=2.366 print_stall=0 extruder: target=240 temp=240.1 pwm=0.493
Stats 796915.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1003522 bytes_read=432258 bytes_retransmit=9 bytes_invalid=0 send_seq=22281 receive_seq=22281 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=3200 freq=119993073 heater_bed: target=80 temp=79.8 pwm=0.619 sd_pos=125396 sysload=0.38 cputime=66.897 memavail=7289808 print_time=2141.928 buffer_time=2.451 print_stall=0 extruder: target=240 temp=239.9 pwm=0.585
Stats 796916.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1008737 bytes_read=432991 bytes_retransmit=9 bytes_invalid=0 send_seq=22369 receive_seq=22369 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993070 heater_bed: target=80 temp=79.8 pwm=0.619 sd_pos=125587 sysload=0.38 cputime=66.995 memavail=7289584 print_time=2142.526 buffer_time=2.048 print_stall=0 extruder: target=240 temp=239.8 pwm=0.548
Stats 796917.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1010488 bytes_read=433473 bytes_retransmit=9 bytes_invalid=0 send_seq=22407 receive_seq=22407 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993066 heater_bed: target=80 temp=79.8 pwm=0.554 sd_pos=125646 sysload=0.38 cputime=67.047 memavail=7289588 print_time=2143.566 buffer_time=2.088 print_stall=0 extruder: target=240 temp=239.8 pwm=0.548
Stats 796918.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1011937 bytes_read=433911 bytes_retransmit=9 bytes_invalid=0 send_seq=22439 receive_seq=22439 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993104 heater_bed: target=80 temp=79.8 pwm=0.554 sd_pos=125867 sysload=0.35 cputime=67.107 memavail=7289588 print_time=2144.880 buffer_time=2.401 print_stall=0 extruder: target=240 temp=239.9 pwm=0.489
Stats 796919.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1014005 bytes_read=434424 bytes_retransmit=9 bytes_invalid=0 send_seq=22483 receive_seq=22483 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119993092 heater_bed: target=80 temp=79.8 pwm=0.511 sd_pos=126201 sysload=0.35 cputime=67.168 memavail=7289588 print_time=2145.687 buffer_time=2.207 print_stall=0 extruder: target=240 temp=240.1 pwm=0.389
Stats 796920.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1014841 bytes_read=434852 bytes_retransmit=9 bytes_invalid=0 send_seq=22507 receive_seq=22507 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993086 heater_bed: target=80 temp=79.9 pwm=0.553 sd_pos=126260 sysload=0.35 cputime=67.223 memavail=7289588 print_time=2146.556 buffer_time=2.075 print_stall=0 extruder: target=240 temp=240.3 pwm=0.338
Stats 796921.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1016299 bytes_read=435295 bytes_retransmit=9 bytes_invalid=0 send_seq=22540 receive_seq=22540 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119993079 heater_bed: target=80 temp=79.9 pwm=0.553 sd_pos=126404 sysload=0.35 cputime=67.287 memavail=7289588 print_time=2148.358 buffer_time=2.876 print_stall=0 extruder: target=240 temp=240.1 pwm=0.509
Stats 796922.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1017174 bytes_read=435708 bytes_retransmit=9 bytes_invalid=0 send_seq=22564 receive_seq=22564 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119993087 heater_bed: target=80 temp=79.9 pwm=0.488 sd_pos=126542 sysload=0.35 cputime=67.336 memavail=7289364 print_time=2148.587 buffer_time=2.105 print_stall=0 extruder: target=240 temp=239.8 pwm=0.603
Stats 796923.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1019741 bytes_read=436248 bytes_retransmit=9 bytes_invalid=0 send_seq=22615 receive_seq=22615 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993076 heater_bed: target=80 temp=79.9 pwm=0.530 sd_pos=126863 sysload=0.32 cputime=67.401 memavail=7289368 print_time=2149.705 buffer_time=2.222 print_stall=0 extruder: target=240 temp=240.0 pwm=0.491
Stats 796924.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1022042 bytes_read=436754 bytes_retransmit=9 bytes_invalid=0 send_seq=22662 receive_seq=22662 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119993070 heater_bed: target=80 temp=79.9 pwm=0.624 sd_pos=127393 sysload=0.32 cputime=67.475 memavail=7289840 print_time=2150.847 buffer_time=2.363 print_stall=0 extruder: target=240 temp=240.1 pwm=0.459
Stats 796925.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1024310 bytes_read=437289 bytes_retransmit=9 bytes_invalid=0 send_seq=22708 receive_seq=22708 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119993059 heater_bed: target=80 temp=79.9 pwm=0.648 sd_pos=127947 sysload=0.32 cputime=67.516 memavail=7289336 print_time=2152.063 buffer_time=2.579 print_stall=0 extruder: target=240 temp=240.2 pwm=0.441
Stats 796926.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1025366 bytes_read=437711 bytes_retransmit=9 bytes_invalid=0 send_seq=22734 receive_seq=22734 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993047 heater_bed: target=80 temp=79.9 pwm=0.569 sd_pos=128091 sysload=0.32 cputime=67.549 memavail=7289336 print_time=2152.558 buffer_time=2.073 print_stall=0 extruder: target=240 temp=240.0 pwm=0.530
Stats 796927.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1031192 bytes_read=438524 bytes_retransmit=9 bytes_invalid=0 send_seq=22841 receive_seq=22841 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993114 heater_bed: target=80 temp=79.9 pwm=0.639 sd_pos=128984 sysload=0.32 cputime=67.606 memavail=7289336 print_time=2154.189 buffer_time=2.704 print_stall=0 extruder: target=240 temp=239.8 pwm=0.600
Stats 796928.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1034633 bytes_read=439142 bytes_retransmit=9 bytes_invalid=0 send_seq=22906 receive_seq=22906 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=67 freq=119993102 heater_bed: target=80 temp=79.9 pwm=0.623 sd_pos=129442 sysload=0.37 cputime=67.673 memavail=7289344 print_time=2154.895 buffer_time=2.409 print_stall=0 extruder: target=240 temp=239.8 pwm=0.508
Stats 796929.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1037209 bytes_read=439674 bytes_retransmit=9 bytes_invalid=0 send_seq=22954 receive_seq=22954 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993100 heater_bed: target=80 temp=79.9 pwm=0.738 sd_pos=129878 sysload=0.37 cputime=67.733 memavail=7291640 print_time=2155.609 buffer_time=2.122 print_stall=0 extruder: target=240 temp=240.0 pwm=0.434
Stats 796930.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1042156 bytes_read=440408 bytes_retransmit=9 bytes_invalid=0 send_seq=23042 receive_seq=23042 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1346 freq=119993095 heater_bed: target=80 temp=79.9 pwm=0.581 sd_pos=130767 sysload=0.37 cputime=67.824 memavail=7290244 print_time=2156.999 buffer_time=2.512 print_stall=0 extruder: target=240 temp=240.2 pwm=0.390
Stats 796931.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1046147 bytes_read=441061 bytes_retransmit=9 bytes_invalid=0 send_seq=23114 receive_seq=23114 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=939 freq=119993093 heater_bed: target=80 temp=79.9 pwm=0.552 sd_pos=131262 sysload=0.37 cputime=67.906 memavail=7290868 print_time=2157.653 buffer_time=2.165 print_stall=0 extruder: target=240 temp=240.2 pwm=0.396
Stats 796932.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1050503 bytes_read=441738 bytes_retransmit=9 bytes_invalid=0 send_seq=23191 receive_seq=23191 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=3220 freq=119993086 heater_bed: target=80 temp=79.9 pwm=0.643 sd_pos=132421 sysload=0.37 cputime=68.007 memavail=7289724 print_time=2158.967 buffer_time=2.478 print_stall=0 extruder: target=240 temp=240.0 pwm=0.475
Stats 796933.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1055731 bytes_read=442466 bytes_retransmit=9 bytes_invalid=0 send_seq=23281 receive_seq=23281 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=1987 freq=119993082 heater_bed: target=80 temp=79.9 pwm=0.590 sd_pos=132919 sysload=0.42 cputime=68.094 memavail=7291532 print_time=2159.665 buffer_time=2.175 print_stall=0 extruder: target=240 temp=240.1 pwm=0.458
Stats 796934.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1060928 bytes_read=443225 bytes_retransmit=9 bytes_invalid=0 send_seq=23371 receive_seq=23371 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2672 freq=119993070 heater_bed: target=80 temp=79.9 pwm=0.606 sd_pos=133909 sysload=0.42 cputime=68.193 memavail=7293336 print_time=2160.760 buffer_time=2.269 print_stall=0 extruder: target=240 temp=240.2 pwm=0.392
Stats 796935.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1066483 bytes_read=443992 bytes_retransmit=9 bytes_invalid=0 send_seq=23466 receive_seq=23466 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=3401 freq=119993071 heater_bed: target=80 temp=79.9 pwm=0.486 sd_pos=134908 sysload=0.42 cputime=68.305 memavail=7293440 print_time=2161.983 buffer_time=2.492 print_stall=0 extruder: target=240 temp=240.1 pwm=0.455
Stats 796936.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1071967 bytes_read=444740 bytes_retransmit=9 bytes_invalid=0 send_seq=23560 receive_seq=23560 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1660 freq=119993100 heater_bed: target=80 temp=79.9 pwm=0.577 sd_pos=135430 sysload=0.42 cputime=68.401 memavail=7292096 print_time=2162.604 buffer_time=2.111 print_stall=0 extruder: target=240 temp=239.9 pwm=0.520
Stats 796937.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1076984 bytes_read=445463 bytes_retransmit=9 bytes_invalid=0 send_seq=23646 receive_seq=23646 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=2961 freq=119993093 heater_bed: target=80 temp=79.9 pwm=0.532 sd_pos=136404 sysload=0.42 cputime=68.506 memavail=7290736 print_time=2163.875 buffer_time=2.382 print_stall=0 extruder: target=240 temp=240.4 pwm=0.307
Stats 796938.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1082703 bytes_read=446240 bytes_retransmit=9 bytes_invalid=0 send_seq=23743 receive_seq=23743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=971 freq=119993083 heater_bed: target=80 temp=79.9 pwm=0.593 sd_pos=136862 sysload=0.39 cputime=68.603 memavail=7292284 print_time=2164.506 buffer_time=2.013 print_stall=0 extruder: target=240 temp=240.0 pwm=0.526
Stats 796939.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1087163 bytes_read=446908 bytes_retransmit=9 bytes_invalid=0 send_seq=23821 receive_seq=23821 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993074 heater_bed: target=80 temp=79.9 pwm=0.607 sd_pos=137585 sysload=0.39 cputime=68.703 memavail=7291812 print_time=2165.794 buffer_time=2.299 print_stall=0 extruder: target=240 temp=240.1 pwm=0.466
Stats 796940.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1088175 bytes_read=447337 bytes_retransmit=9 bytes_invalid=0 send_seq=23845 receive_seq=23845 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993065 heater_bed: target=80 temp=79.9 pwm=0.607 sd_pos=137644 sysload=0.39 cputime=68.767 memavail=7293616 print_time=2166.567 buffer_time=2.072 print_stall=0 extruder: target=240 temp=240.1 pwm=0.456
Stats 796941.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1090187 bytes_read=447834 bytes_retransmit=9 bytes_invalid=0 send_seq=23886 receive_seq=23886 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993056 heater_bed: target=80 temp=79.9 pwm=0.662 sd_pos=137843 sysload=0.39 cputime=68.832 memavail=7295660 print_time=2167.691 buffer_time=2.195 print_stall=0 extruder: target=240 temp=239.8 pwm=0.545
Stats 796942.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1091533 bytes_read=448272 bytes_retransmit=9 bytes_invalid=0 send_seq=23918 receive_seq=23918 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119993046 heater_bed: target=80 temp=79.9 pwm=0.678 sd_pos=137901 sysload=0.39 cputime=68.890 memavail=7294092 print_time=2168.797 buffer_time=2.300 print_stall=0 extruder: target=240 temp=239.9 pwm=0.470
Stats 796943.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1095543 bytes_read=448940 bytes_retransmit=9 bytes_invalid=0 send_seq=23993 receive_seq=23993 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993039 heater_bed: target=80 temp=79.9 pwm=0.678 sd_pos=138499 sysload=0.36 cputime=68.954 memavail=7292300 print_time=2169.733 buffer_time=2.236 print_stall=0 extruder: target=240 temp=240.0 pwm=0.527
Stats 796944.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1100287 bytes_read=449667 bytes_retransmit=9 bytes_invalid=0 send_seq=24080 receive_seq=24080 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1424 freq=119993034 heater_bed: target=80 temp=79.9 pwm=0.624 sd_pos=139760 sysload=0.36 cputime=69.033 memavail=7294356 print_time=2170.932 buffer_time=2.434 print_stall=0 extruder: target=240 temp=240.1 pwm=0.468
Stats 796945.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1103648 bytes_read=450271 bytes_retransmit=9 bytes_invalid=0 send_seq=24142 receive_seq=24142 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=2072 freq=119993079 heater_bed: target=80 temp=79.9 pwm=0.617 sd_pos=140434 sysload=0.36 cputime=69.128 memavail=7291728 print_time=2171.620 buffer_time=2.121 print_stall=0 extruder: target=240 temp=240.3 pwm=0.375
Stats 796946.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1108981 bytes_read=451014 bytes_retransmit=9 bytes_invalid=0 send_seq=24232 receive_seq=24232 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=166 freq=119993072 heater_bed: target=80 temp=79.9 pwm=0.491 sd_pos=140670 sysload=0.36 cputime=69.245 memavail=7290816 print_time=2173.084 buffer_time=2.585 print_stall=0 extruder: target=240 temp=240.0 pwm=0.549
Stats 796947.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1109922 bytes_read=451421 bytes_retransmit=9 bytes_invalid=0 send_seq=24255 receive_seq=24255 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119993064 heater_bed: target=80 temp=79.9 pwm=0.570 sd_pos=140700 sysload=0.36 cputime=69.296 memavail=7292616 print_time=2173.551 buffer_time=2.051 print_stall=0 extruder: target=240 temp=239.8 pwm=0.592
Stats 796948.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1111369 bytes_read=451869 bytes_retransmit=9 bytes_invalid=0 send_seq=24289 receive_seq=24289 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993064 heater_bed: target=80 temp=79.9 pwm=0.518 sd_pos=140891 sysload=0.33 cputime=69.361 memavail=7291720 print_time=2174.644 buffer_time=2.143 print_stall=0 extruder: target=240 temp=239.7 pwm=0.613
Stats 796949.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1113975 bytes_read=452433 bytes_retransmit=9 bytes_invalid=0 send_seq=24340 receive_seq=24340 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993065 heater_bed: target=80 temp=80.0 pwm=0.518 sd_pos=141284 sysload=0.33 cputime=69.438 memavail=7291720 print_time=2176.319 buffer_time=2.819 print_stall=0 extruder: target=240 temp=239.9 pwm=0.495
Stats 796950.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1114752 bytes_read=452830 bytes_retransmit=9 bytes_invalid=0 send_seq=24361 receive_seq=24361 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119993061 heater_bed: target=80 temp=80.0 pwm=0.517 sd_pos=141284 sysload=0.33 cputime=69.499 memavail=7291720 print_time=2176.642 buffer_time=2.140 print_stall=0 extruder: target=240 temp=240.1 pwm=0.437
Stats 796951.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1115658 bytes_read=453228 bytes_retransmit=9 bytes_invalid=0 send_seq=24385 receive_seq=24385 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993051 heater_bed: target=80 temp=80.0 pwm=0.539 sd_pos=141428 sysload=0.33 cputime=69.555 memavail=7291724 print_time=2178.122 buffer_time=2.621 print_stall=0 extruder: target=240 temp=239.9 pwm=0.538
Stats 796952.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1119139 bytes_read=453856 bytes_retransmit=9 bytes_invalid=0 send_seq=24452 receive_seq=24452 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119993042 heater_bed: target=80 temp=80.0 pwm=0.488 sd_pos=141928 sysload=0.33 cputime=69.628 memavail=7291724 print_time=2179.545 buffer_time=3.043 print_stall=0 extruder: target=240 temp=240.2 pwm=0.418
Stats 796953.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1119382 bytes_read=454213 bytes_retransmit=9 bytes_invalid=0 send_seq=24465 receive_seq=24465 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993037 heater_bed: target=80 temp=80.1 pwm=0.553 sd_pos=141928 sysload=0.30 cputime=69.677 memavail=7291724 print_time=2179.545 buffer_time=2.043 print_stall=0 extruder: target=240 temp=240.1 pwm=0.479
Stats 796954.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1121413 bytes_read=454711 bytes_retransmit=9 bytes_invalid=0 send_seq=24506 receive_seq=24506 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993037 heater_bed: target=80 temp=80.1 pwm=0.541 sd_pos=142458 sysload=0.30 cputime=69.749 memavail=7290684 print_time=2180.613 buffer_time=2.110 print_stall=0 extruder: target=240 temp=240.1 pwm=0.479
Stats 796955.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1123656 bytes_read=455229 bytes_retransmit=9 bytes_invalid=0 send_seq=24551 receive_seq=24551 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993034 heater_bed: target=80 temp=80.1 pwm=0.517 sd_pos=143013 sysload=0.30 cputime=69.800 memavail=7289676 print_time=2181.828 buffer_time=2.324 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 796956.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1126953 bytes_read=455831 bytes_retransmit=9 bytes_invalid=0 send_seq=24613 receive_seq=24613 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119993024 heater_bed: target=80 temp=80.1 pwm=0.592 sd_pos=143655 sysload=0.30 cputime=69.864 memavail=7289676 print_time=2183.239 buffer_time=2.735 print_stall=0 extruder: target=240 temp=240.0 pwm=0.519
Stats 796957.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1130314 bytes_read=456434 bytes_retransmit=9 bytes_invalid=0 send_seq=24678 receive_seq=24678 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993015 heater_bed: target=80 temp=80.1 pwm=0.537 sd_pos=144264 sysload=0.30 cputime=69.937 memavail=7289676 print_time=2183.853 buffer_time=2.349 print_stall=0 extruder: target=240 temp=240.0 pwm=0.499
Stats 796958.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1134285 bytes_read=457096 bytes_retransmit=9 bytes_invalid=0 send_seq=24752 receive_seq=24752 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=2729 freq=119993008 heater_bed: target=80 temp=80.1 pwm=0.599 sd_pos=145649 sysload=0.28 cputime=70.013 memavail=7289676 print_time=2185.131 buffer_time=2.626 print_stall=0 extruder: target=240 temp=240.0 pwm=0.434
Stats 796959.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1138005 bytes_read=457722 bytes_retransmit=9 bytes_invalid=0 send_seq=24817 receive_seq=24817 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2335 freq=119993040 heater_bed: target=80 temp=80.0 pwm=0.689 sd_pos=146342 sysload=0.28 cputime=70.118 memavail=7289676 print_time=2185.738 buffer_time=2.233 print_stall=0 extruder: target=240 temp=239.8 pwm=0.554
Stats 796960.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1143446 bytes_read=458458 bytes_retransmit=9 bytes_invalid=0 send_seq=24910 receive_seq=24910 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=3777 freq=119993032 heater_bed: target=80 temp=80.1 pwm=0.560 sd_pos=147469 sysload=0.28 cputime=70.234 memavail=7289676 print_time=2187.125 buffer_time=2.618 print_stall=0 extruder: target=240 temp=240.2 pwm=0.409
Stats 796961.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1148847 bytes_read=459208 bytes_retransmit=9 bytes_invalid=0 send_seq=25002 receive_seq=25002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=1084 freq=119993030 heater_bed: target=80 temp=80.0 pwm=0.572 sd_pos=148053 sysload=0.28 cputime=70.336 memavail=7289676 print_time=2187.606 buffer_time=2.099 print_stall=0 extruder: target=240 temp=240.3 pwm=0.408
Stats 796962.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1153871 bytes_read=459930 bytes_retransmit=9 bytes_invalid=0 send_seq=25088 receive_seq=25088 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2868 freq=119993028 heater_bed: target=80 temp=80.1 pwm=0.528 sd_pos=149364 sysload=0.28 cputime=70.448 memavail=7289676 print_time=2188.837 buffer_time=2.329 print_stall=0 extruder: target=240 temp=240.1 pwm=0.462
Stats 796963.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1158877 bytes_read=460643 bytes_retransmit=9 bytes_invalid=0 send_seq=25175 receive_seq=25175 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=4086 freq=119993066 heater_bed: target=80 temp=80.1 pwm=0.496 sd_pos=150645 sysload=0.25 cputime=70.568 memavail=7289676 print_time=2190.059 buffer_time=2.549 print_stall=0 extruder: target=240 temp=240.0 pwm=0.513
Stats 796964.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1164712 bytes_read=461442 bytes_retransmit=9 bytes_invalid=0 send_seq=25273 receive_seq=25273 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=2293 freq=119993062 heater_bed: target=80 temp=80.1 pwm=0.608 sd_pos=151243 sysload=0.25 cputime=70.670 memavail=7289676 print_time=2190.730 buffer_time=2.219 print_stall=0 extruder: target=240 temp=239.8 pwm=0.540
Stats 796965.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1169822 bytes_read=462179 bytes_retransmit=9 bytes_invalid=0 send_seq=25362 receive_seq=25362 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2457 freq=119993054 heater_bed: target=80 temp=80.1 pwm=0.606 sd_pos=152016 sysload=0.25 cputime=70.787 memavail=7293076 print_time=2191.756 buffer_time=2.245 print_stall=0 extruder: target=240 temp=240.1 pwm=0.393
Stats 796966.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1175434 bytes_read=462927 bytes_retransmit=9 bytes_invalid=0 send_seq=25457 receive_seq=25456 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=7 upcoming_bytes=1057 freq=119993051 heater_bed: target=80 temp=80.1 pwm=0.512 sd_pos=152499 sysload=0.25 cputime=70.906 memavail=7290676 print_time=2192.712 buffer_time=2.200 print_stall=0 extruder: target=240 temp=240.3 pwm=0.393
Stats 796967.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1180778 bytes_read=463696 bytes_retransmit=9 bytes_invalid=0 send_seq=25549 receive_seq=25549 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=2536 freq=119993100 heater_bed: target=80 temp=80.1 pwm=0.599 sd_pos=153408 sysload=0.25 cputime=71.031 memavail=7290772 print_time=2194.250 buffer_time=2.737 print_stall=0 extruder: target=240 temp=240.4 pwm=0.343
Stats 796968.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1184915 bytes_read=464353 bytes_retransmit=9 bytes_invalid=0 send_seq=25622 receive_seq=25622 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=1601 freq=119993098 heater_bed: target=80 temp=80.1 pwm=0.599 sd_pos=154109 sysload=0.23 cputime=71.124 memavail=7290772 print_time=2195.199 buffer_time=2.680 print_stall=0 extruder: target=240 temp=240.1 pwm=0.468
Stats 796969.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1187418 bytes_read=464881 bytes_retransmit=9 bytes_invalid=0 send_seq=25672 receive_seq=25672 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993083 heater_bed: target=80 temp=80.1 pwm=0.523 sd_pos=154195 sysload=0.23 cputime=71.180 memavail=7290772 print_time=2195.735 buffer_time=2.215 print_stall=0 extruder: target=240 temp=240.0 pwm=0.515
Stats 796970.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1189317 bytes_read=465395 bytes_retransmit=9 bytes_invalid=0 send_seq=25713 receive_seq=25713 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119993070 heater_bed: target=80 temp=80.1 pwm=0.634 sd_pos=154365 sysload=0.23 cputime=71.250 memavail=7290772 print_time=2196.790 buffer_time=2.270 print_stall=0 extruder: target=240 temp=239.9 pwm=0.524
Stats 796971.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1190483 bytes_read=465822 bytes_retransmit=9 bytes_invalid=0 send_seq=25740 receive_seq=25740 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993070 heater_bed: target=80 temp=80.1 pwm=0.536 sd_pos=154452 sysload=0.23 cputime=71.305 memavail=7290776 print_time=2197.632 buffer_time=2.112 print_stall=0 extruder: target=240 temp=240.0 pwm=0.470
Stats 796972.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1191792 bytes_read=466250 bytes_retransmit=9 bytes_invalid=0 send_seq=25770 receive_seq=25770 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993063 heater_bed: target=80 temp=80.0 pwm=0.600 sd_pos=154510 sysload=0.23 cputime=71.368 memavail=7290776 print_time=2198.738 buffer_time=2.217 print_stall=0 extruder: target=240 temp=240.0 pwm=0.470
Stats 796973.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1195907 bytes_read=466928 bytes_retransmit=9 bytes_invalid=0 send_seq=25847 receive_seq=25847 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993054 heater_bed: target=80 temp=80.0 pwm=0.600 sd_pos=155224 sysload=0.22 cputime=71.445 memavail=7290776 print_time=2199.707 buffer_time=2.185 print_stall=0 extruder: target=240 temp=240.2 pwm=0.378
Stats 796975.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1200649 bytes_read=467650 bytes_retransmit=9 bytes_invalid=0 send_seq=25933 receive_seq=25933 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1557 freq=119993051 heater_bed: target=80 temp=80.0 pwm=0.600 sd_pos=156750 sysload=0.22 cputime=71.533 memavail=7290776 print_time=2200.905 buffer_time=2.382 print_stall=0 extruder: target=240 temp=240.4 pwm=0.321
Stats 796976.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1204362 bytes_read=468269 bytes_retransmit=9 bytes_invalid=0 send_seq=25998 receive_seq=25998 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=1903 freq=119993047 heater_bed: target=80 temp=80.0 pwm=0.600 sd_pos=157583 sysload=0.22 cputime=71.627 memavail=7290524 print_time=2201.602 buffer_time=2.079 print_stall=0 extruder: target=240 temp=239.9 pwm=0.550
Stats 796977.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1209465 bytes_read=469002 bytes_retransmit=9 bytes_invalid=0 send_seq=26086 receive_seq=26086 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119993039 heater_bed: target=80 temp=80.0 pwm=0.497 sd_pos=157804 sysload=0.22 cputime=71.724 memavail=7290524 print_time=2203.016 buffer_time=2.493 print_stall=0 extruder: target=240 temp=239.7 pwm=0.611
Stats 796978.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1211489 bytes_read=469514 bytes_retransmit=9 bytes_invalid=0 send_seq=26130 receive_seq=26130 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119993031 heater_bed: target=80 temp=80.0 pwm=0.631 sd_pos=158025 sysload=0.22 cputime=71.790 memavail=7290524 print_time=2204.576 buffer_time=3.051 print_stall=0 extruder: target=240 temp=239.8 pwm=0.500
Stats 796979.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1211749 bytes_read=469872 bytes_retransmit=9 bytes_invalid=0 send_seq=26146 receive_seq=26146 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993024 heater_bed: target=80 temp=80.0 pwm=0.526 sd_pos=158025 sysload=0.20 cputime=71.838 memavail=7290300 print_time=2204.576 buffer_time=2.050 print_stall=0 extruder: target=240 temp=240.0 pwm=0.447
Stats 796980.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1214415 bytes_read=470425 bytes_retransmit=9 bytes_invalid=0 send_seq=26198 receive_seq=26198 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993019 heater_bed: target=80 temp=80.1 pwm=0.526 sd_pos=158418 sysload=0.20 cputime=71.910 memavail=7290300 print_time=2206.251 buffer_time=2.725 print_stall=0 extruder: target=240 temp=240.2 pwm=0.431
Stats 796981.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1215176 bytes_read=470843 bytes_retransmit=9 bytes_invalid=0 send_seq=26220 receive_seq=26220 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993043 heater_bed: target=80 temp=80.1 pwm=0.595 sd_pos=158418 sysload=0.20 cputime=71.962 memavail=7290300 print_time=2206.573 buffer_time=2.047 print_stall=0 extruder: target=240 temp=240.0 pwm=0.545
Stats 796982.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1216091 bytes_read=471246 bytes_retransmit=9 bytes_invalid=0 send_seq=26245 receive_seq=26245 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993035 heater_bed: target=80 temp=80.1 pwm=0.465 sd_pos=158562 sysload=0.20 cputime=72.017 memavail=7290300 print_time=2208.054 buffer_time=2.527 print_stall=0 extruder: target=240 temp=240.0 pwm=0.568
Stats 796983.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1219216 bytes_read=471839 bytes_retransmit=9 bytes_invalid=0 send_seq=26305 receive_seq=26305 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119993028 heater_bed: target=80 temp=80.1 pwm=0.522 sd_pos=159022 sysload=0.20 cputime=72.085 memavail=7290300 print_time=2209.401 buffer_time=2.874 print_stall=0 extruder: target=240 temp=239.8 pwm=0.568
Stats 796984.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1220088 bytes_read=472241 bytes_retransmit=9 bytes_invalid=0 send_seq=26327 receive_seq=26327 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119993023 heater_bed: target=80 temp=80.1 pwm=0.522 sd_pos=159105 sysload=0.18 cputime=72.135 memavail=7290300 print_time=2209.715 buffer_time=2.187 print_stall=0 extruder: target=240 temp=239.8 pwm=0.568
Stats 796985.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1221734 bytes_read=472694 bytes_retransmit=9 bytes_invalid=0 send_seq=26362 receive_seq=26362 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993061 heater_bed: target=80 temp=80.2 pwm=0.437 sd_pos=159551 sysload=0.18 cputime=72.193 memavail=7290264 print_time=2210.543 buffer_time=2.014 print_stall=0 extruder: target=240 temp=240.1 pwm=0.471
Stats 796986.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1224054 bytes_read=473237 bytes_retransmit=9 bytes_invalid=0 send_seq=26409 receive_seq=26409 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993053 heater_bed: target=80 temp=80.1 pwm=0.542 sd_pos=160106 sysload=0.18 cputime=72.260 memavail=7290048 print_time=2211.758 buffer_time=2.228 print_stall=0 extruder: target=240 temp=240.2 pwm=0.420
Stats 796987.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1227408 bytes_read=473849 bytes_retransmit=9 bytes_invalid=0 send_seq=26473 receive_seq=26473 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993045 heater_bed: target=80 temp=80.2 pwm=0.542 sd_pos=160746 sysload=0.18 cputime=72.328 memavail=7290048 print_time=2213.166 buffer_time=2.636 print_stall=0 extruder: target=240 temp=240.1 pwm=0.509
Stats 796988.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1230703 bytes_read=474447 bytes_retransmit=9 bytes_invalid=0 send_seq=26537 receive_seq=26537 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993035 heater_bed: target=80 temp=80.2 pwm=0.485 sd_pos=161496 sysload=0.18 cputime=72.395 memavail=7290048 print_time=2213.774 buffer_time=2.243 print_stall=0 extruder: target=240 temp=239.9 pwm=0.562
Stats 796989.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1234683 bytes_read=475115 bytes_retransmit=9 bytes_invalid=0 send_seq=26612 receive_seq=26612 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=2224 freq=119993033 heater_bed: target=80 temp=80.1 pwm=0.573 sd_pos=163047 sysload=0.25 cputime=72.471 memavail=7290048 print_time=2214.918 buffer_time=2.386 print_stall=0 extruder: target=240 temp=240.1 pwm=0.463
Stats 796990.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1238901 bytes_read=475777 bytes_retransmit=9 bytes_invalid=0 send_seq=26686 receive_seq=26686 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=1598 freq=119993030 heater_bed: target=80 temp=80.1 pwm=0.571 sd_pos=163740 sysload=0.25 cputime=72.559 memavail=7290048 print_time=2215.555 buffer_time=2.024 print_stall=0 extruder: target=240 temp=240.0 pwm=0.462
Stats 796991.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1244403 bytes_read=476536 bytes_retransmit=9 bytes_invalid=0 send_seq=26779 receive_seq=26779 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3188 freq=119993026 heater_bed: target=80 temp=80.1 pwm=0.571 sd_pos=165096 sysload=0.25 cputime=72.665 memavail=7290048 print_time=2216.926 buffer_time=2.394 print_stall=0 extruder: target=240 temp=240.0 pwm=0.496
Stats 796992.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1250033 bytes_read=477314 bytes_retransmit=9 bytes_invalid=0 send_seq=26876 receive_seq=26876 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=3321 freq=119993018 heater_bed: target=80 temp=80.1 pwm=0.544 sd_pos=166471 sysload=0.25 cputime=72.779 memavail=7290048 print_time=2217.997 buffer_time=2.463 print_stall=0 extruder: target=240 temp=239.8 pwm=0.569
Stats 796993.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1255167 bytes_read=478051 bytes_retransmit=9 bytes_invalid=0 send_seq=26965 receive_seq=26965 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=1595 freq=119993014 heater_bed: target=80 temp=80.1 pwm=0.544 sd_pos=167303 sysload=0.25 cputime=72.874 memavail=7290048 print_time=2218.567 buffer_time=2.033 print_stall=0 extruder: target=240 temp=240.0 pwm=0.457
Stats 796994.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1260438 bytes_read=478789 bytes_retransmit=9 bytes_invalid=0 send_seq=27057 receive_seq=27057 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2430 freq=119993016 heater_bed: target=80 temp=80.1 pwm=0.605 sd_pos=168933 sysload=0.23 cputime=72.983 memavail=7290048 print_time=2219.747 buffer_time=2.212 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 796995.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1266140 bytes_read=479565 bytes_retransmit=9 bytes_invalid=0 send_seq=27154 receive_seq=27154 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=3298 freq=119993007 heater_bed: target=80 temp=80.2 pwm=0.470 sd_pos=170224 sysload=0.23 cputime=73.099 memavail=7290048 print_time=2220.905 buffer_time=2.370 print_stall=0 extruder: target=240 temp=240.0 pwm=0.471
Stats 796996.0: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1271214 bytes_read=480298 bytes_retransmit=9 bytes_invalid=0 send_seq=27241 receive_seq=27241 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=4140 freq=119993003 heater_bed: target=80 temp=80.2 pwm=0.527 sd_pos=171127 sysload=0.23 cputime=73.208 memavail=7290048 print_time=2222.295 buffer_time=2.760 print_stall=0 extruder: target=240 temp=240.2 pwm=0.442
Stats 796997.0: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1277067 bytes_read=481064 bytes_retransmit=9 bytes_invalid=0 send_seq=27340 receive_seq=27340 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=2563 freq=119992998 heater_bed: target=80 temp=80.1 pwm=0.624 sd_pos=171631 sysload=0.23 cputime=73.312 memavail=7289824 print_time=2223.127 buffer_time=2.591 print_stall=0 extruder: target=240 temp=239.9 pwm=0.593
Stats 796998.0: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1282074 bytes_read=481787 bytes_retransmit=9 bytes_invalid=0 send_seq=27426 receive_seq=27426 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1344 freq=119993005 heater_bed: target=80 temp=80.2 pwm=0.471 sd_pos=172112 sysload=0.23 cputime=73.398 memavail=7289824 print_time=2223.924 buffer_time=2.387 print_stall=0 extruder: target=240 temp=239.9 pwm=0.512
Stats 796999.0: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1286687 bytes_read=482484 bytes_retransmit=9 bytes_invalid=0 send_seq=27507 receive_seq=27507 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119993008 heater_bed: target=80 temp=80.1 pwm=0.629 sd_pos=172843 sysload=0.21 cputime=73.490 memavail=7289824 print_time=2224.880 buffer_time=2.343 print_stall=0 extruder: target=240 temp=239.8 pwm=0.573
Stats 797000.0: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1288089 bytes_read=482922 bytes_retransmit=9 bytes_invalid=0 send_seq=27539 receive_seq=27539 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119993010 heater_bed: target=80 temp=80.1 pwm=0.616 sd_pos=172929 sysload=0.21 cputime=73.539 memavail=7289824 print_time=2225.732 buffer_time=2.195 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 797001.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1289840 bytes_read=483406 bytes_retransmit=9 bytes_invalid=0 send_seq=27574 receive_seq=27574 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993003 heater_bed: target=80 temp=80.1 pwm=0.558 sd_pos=173111 sysload=0.21 cputime=73.595 memavail=7289600 print_time=2226.631 buffer_time=2.093 print_stall=0 extruder: target=240 temp=240.0 pwm=0.501
Stats 797002.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1291156 bytes_read=483853 bytes_retransmit=9 bytes_invalid=0 send_seq=27605 receive_seq=27605 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992996 heater_bed: target=80 temp=80.1 pwm=0.506 sd_pos=173198 sysload=0.21 cputime=73.670 memavail=7289600 print_time=2227.998 buffer_time=2.460 print_stall=0 extruder: target=240 temp=240.3 pwm=0.370
Stats 797003.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1294278 bytes_read=484436 bytes_retransmit=9 bytes_invalid=0 send_seq=27666 receive_seq=27666 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119993023 heater_bed: target=80 temp=80.1 pwm=0.594 sd_pos=173638 sysload=0.21 cputime=73.739 memavail=7289600 print_time=2229.153 buffer_time=2.615 print_stall=0 extruder: target=240 temp=240.1 pwm=0.488
Stats 797004.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1297291 bytes_read=485024 bytes_retransmit=9 bytes_invalid=0 send_seq=27725 receive_seq=27725 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993013 heater_bed: target=80 temp=80.1 pwm=0.585 sd_pos=174060 sysload=0.35 cputime=73.802 memavail=7289600 print_time=2229.798 buffer_time=2.258 print_stall=0 extruder: target=240 temp=239.9 pwm=0.570
Stats 797005.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1301323 bytes_read=485696 bytes_retransmit=9 bytes_invalid=0 send_seq=27801 receive_seq=27801 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1615 freq=119993013 heater_bed: target=80 temp=80.1 pwm=0.579 sd_pos=175484 sysload=0.35 cputime=73.878 memavail=7289600 print_time=2230.843 buffer_time=2.302 print_stall=0 extruder: target=240 temp=239.9 pwm=0.534
Stats 797006.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1305518 bytes_read=486360 bytes_retransmit=9 bytes_invalid=0 send_seq=27875 receive_seq=27875 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=1589 freq=119993007 heater_bed: target=80 temp=80.1 pwm=0.518 sd_pos=176203 sysload=0.35 cputime=73.970 memavail=7290116 print_time=2231.565 buffer_time=2.023 print_stall=0 extruder: target=240 temp=239.9 pwm=0.467
Stats 797007.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1310747 bytes_read=487103 bytes_retransmit=9 bytes_invalid=0 send_seq=27965 receive_seq=27965 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=624 freq=119993027 heater_bed: target=80 temp=80.0 pwm=0.622 sd_pos=176769 sysload=0.35 cputime=74.081 memavail=7290116 print_time=2232.631 buffer_time=2.089 print_stall=0 extruder: target=240 temp=240.0 pwm=0.447
Stats 797008.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1313309 bytes_read=487655 bytes_retransmit=9 bytes_invalid=0 send_seq=28017 receive_seq=28017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119993021 heater_bed: target=80 temp=80.0 pwm=0.564 sd_pos=176827 sysload=0.35 cputime=74.160 memavail=7289892 print_time=2233.710 buffer_time=2.167 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 797009.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1314798 bytes_read=488093 bytes_retransmit=9 bytes_invalid=0 send_seq=28049 receive_seq=28049 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993017 heater_bed: target=80 temp=80.0 pwm=0.610 sd_pos=177048 sysload=0.32 cputime=74.221 memavail=7289892 print_time=2235.025 buffer_time=2.481 print_stall=0 extruder: target=240 temp=239.8 pwm=0.567
Stats 797010.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1315725 bytes_read=488511 bytes_retransmit=9 bytes_invalid=0 send_seq=28074 receive_seq=28074 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993011 heater_bed: target=80 temp=80.1 pwm=0.424 sd_pos=177199 sysload=0.32 cputime=74.283 memavail=7289892 print_time=2235.554 buffer_time=2.009 print_stall=0 extruder: target=240 temp=239.8 pwm=0.564
Stats 797011.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1317678 bytes_read=489029 bytes_retransmit=9 bytes_invalid=0 send_seq=28116 receive_seq=28116 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993002 heater_bed: target=80 temp=80.1 pwm=0.513 sd_pos=177441 sysload=0.32 cputime=74.352 memavail=7289892 print_time=2236.700 buffer_time=2.155 print_stall=0 extruder: target=240 temp=240.2 pwm=0.383
Stats 797012.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1318614 bytes_read=489427 bytes_retransmit=9 bytes_invalid=0 send_seq=28140 receive_seq=28140 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993053 heater_bed: target=80 temp=80.1 pwm=0.506 sd_pos=177500 sysload=0.32 cputime=74.419 memavail=7289892 print_time=2237.609 buffer_time=2.063 print_stall=0 extruder: target=240 temp=240.3 pwm=0.379
Stats 797013.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1320093 bytes_read=489890 bytes_retransmit=9 bytes_invalid=0 send_seq=28174 receive_seq=28174 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993045 heater_bed: target=80 temp=80.2 pwm=0.504 sd_pos=177723 sysload=0.32 cputime=74.482 memavail=7289892 print_time=2238.733 buffer_time=2.186 print_stall=0 extruder: target=240 temp=240.1 pwm=0.498
Stats 797014.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1322619 bytes_read=490447 bytes_retransmit=9 bytes_invalid=0 send_seq=28227 receive_seq=28227 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993043 heater_bed: target=80 temp=80.2 pwm=0.398 sd_pos=178047 sysload=0.30 cputime=74.547 memavail=7290148 print_time=2239.850 buffer_time=2.303 print_stall=0 extruder: target=240 temp=240.0 pwm=0.484
Stats 797015.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1324217 bytes_read=490900 bytes_retransmit=9 bytes_invalid=0 send_seq=28262 receive_seq=28262 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993039 heater_bed: target=80 temp=80.2 pwm=0.446 sd_pos=178351 sysload=0.30 cputime=74.619 memavail=7289644 print_time=2240.569 buffer_time=2.021 print_stall=0 extruder: target=240 temp=240.0 pwm=0.489
Stats 797016.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1327173 bytes_read=491493 bytes_retransmit=9 bytes_invalid=0 send_seq=28319 receive_seq=28319 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119993083 heater_bed: target=80 temp=80.2 pwm=0.446 sd_pos=179141 sysload=0.30 cputime=74.692 memavail=7289648 print_time=2242.207 buffer_time=2.659 print_stall=0 extruder: target=240 temp=239.9 pwm=0.547
Stats 797017.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1328252 bytes_read=491920 bytes_retransmit=9 bytes_invalid=0 send_seq=28346 receive_seq=28346 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993073 heater_bed: target=80 temp=80.2 pwm=0.538 sd_pos=179285 sysload=0.30 cputime=74.746 memavail=7289648 print_time=2242.702 buffer_time=2.153 print_stall=0 extruder: target=240 temp=239.9 pwm=0.469
Stats 797018.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1330941 bytes_read=492468 bytes_retransmit=9 bytes_invalid=0 send_seq=28400 receive_seq=28400 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993067 heater_bed: target=80 temp=80.2 pwm=0.538 sd_pos=179837 sysload=0.30 cputime=74.812 memavail=7289648 print_time=2243.645 buffer_time=2.096 print_stall=0 extruder: target=240 temp=240.1 pwm=0.412
Stats 797019.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1337264 bytes_read=493331 bytes_retransmit=9 bytes_invalid=0 send_seq=28514 receive_seq=28514 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119993059 heater_bed: target=80 temp=80.2 pwm=0.519 sd_pos=181321 sysload=0.27 cputime=74.899 memavail=7289648 print_time=2244.840 buffer_time=2.290 print_stall=0 extruder: target=240 temp=240.6 pwm=0.205
Stats 797020.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1339942 bytes_read=493878 bytes_retransmit=9 bytes_invalid=0 send_seq=28565 receive_seq=28565 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=3732 freq=119993052 heater_bed: target=80 temp=80.1 pwm=0.534 sd_pos=182677 sysload=0.27 cputime=74.985 memavail=7289648 print_time=2246.086 buffer_time=2.535 print_stall=0 extruder: target=240 temp=240.4 pwm=0.375
Stats 797021.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1345137 bytes_read=494617 bytes_retransmit=9 bytes_invalid=0 send_seq=28654 receive_seq=28654 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2246 freq=119993070 heater_bed: target=80 temp=80.1 pwm=0.670 sd_pos=183342 sysload=0.27 cputime=75.099 memavail=7289648 print_time=2246.780 buffer_time=2.229 print_stall=0 extruder: target=240 temp=239.9 pwm=0.568
Stats 797022.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1350760 bytes_read=495395 bytes_retransmit=9 bytes_invalid=0 send_seq=28751 receive_seq=28751 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=2504 freq=119993059 heater_bed: target=80 temp=80.1 pwm=0.545 sd_pos=184667 sysload=0.27 cputime=75.227 memavail=7289648 print_time=2247.938 buffer_time=2.386 print_stall=0 extruder: target=240 temp=240.0 pwm=0.486
Stats 797023.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1355972 bytes_read=496137 bytes_retransmit=9 bytes_invalid=0 send_seq=28841 receive_seq=28841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=3557 freq=119993052 heater_bed: target=80 temp=80.1 pwm=0.545 sd_pos=186184 sysload=0.27 cputime=75.351 memavail=7288992 print_time=2249.076 buffer_time=2.523 print_stall=0 extruder: target=240 temp=239.9 pwm=0.519
Stats 797024.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1361062 bytes_read=496855 bytes_retransmit=9 bytes_invalid=0 send_seq=28929 receive_seq=28929 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1736 freq=119993055 heater_bed: target=80 temp=80.1 pwm=0.491 sd_pos=186927 sysload=0.25 cputime=75.449 memavail=7288072 print_time=2249.672 buffer_time=2.119 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 797025.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1366512 bytes_read=497608 bytes_retransmit=9 bytes_invalid=0 send_seq=29021 receive_seq=29021 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2609 freq=119993072 heater_bed: target=80 temp=80.1 pwm=0.523 sd_pos=188472 sysload=0.25 cputime=75.574 memavail=7288072 print_time=2250.878 buffer_time=2.324 print_stall=0 extruder: target=240 temp=240.1 pwm=0.424
Stats 797026.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1371808 bytes_read=498371 bytes_retransmit=9 bytes_invalid=0 send_seq=29113 receive_seq=29112 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=3998 freq=119993066 heater_bed: target=80 temp=80.1 pwm=0.520 sd_pos=189619 sysload=0.25 cputime=75.695 memavail=7287820 print_time=2252.150 buffer_time=2.595 print_stall=0 extruder: target=240 temp=240.3 pwm=0.424
Stats 797027.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1376894 bytes_read=499094 bytes_retransmit=9 bytes_invalid=0 send_seq=29201 receive_seq=29201 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=1866 freq=119993055 heater_bed: target=80 temp=80.1 pwm=0.592 sd_pos=189931 sysload=0.25 cputime=75.804 memavail=7287820 print_time=2252.888 buffer_time=2.333 print_stall=0 extruder: target=240 temp=240.1 pwm=0.475
Stats 797028.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1382691 bytes_read=499882 bytes_retransmit=9 bytes_invalid=0 send_seq=29300 receive_seq=29300 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=7 freq=119993045 heater_bed: target=80 temp=80.1 pwm=0.496 sd_pos=190439 sysload=0.25 cputime=75.918 memavail=7287820 print_time=2253.615 buffer_time=2.059 print_stall=0 extruder: target=240 temp=240.2 pwm=0.444
Stats 797029.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1387024 bytes_read=500565 bytes_retransmit=9 bytes_invalid=0 send_seq=29376 receive_seq=29376 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1264 freq=119993031 heater_bed: target=80 temp=80.1 pwm=0.569 sd_pos=191766 sysload=0.23 cputime=76.031 memavail=7287820 print_time=2254.847 buffer_time=2.289 print_stall=0 extruder: target=240 temp=239.8 pwm=0.597
Stats 797030.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1391038 bytes_read=501193 bytes_retransmit=9 bytes_invalid=0 send_seq=29446 receive_seq=29446 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119993022 heater_bed: target=80 temp=80.1 pwm=0.561 sd_pos=191959 sysload=0.23 cputime=76.113 memavail=7287820 print_time=2256.077 buffer_time=2.519 print_stall=0 extruder: target=240 temp=239.9 pwm=0.470
Stats 797031.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1392055 bytes_read=501631 bytes_retransmit=9 bytes_invalid=0 send_seq=29470 receive_seq=29470 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993015 heater_bed: target=80 temp=80.1 pwm=0.499 sd_pos=192018 sysload=0.23 cputime=76.173 memavail=7287820 print_time=2256.850 buffer_time=2.290 print_stall=0 extruder: target=240 temp=239.9 pwm=0.460
Stats 797032.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1393788 bytes_read=502082 bytes_retransmit=9 bytes_invalid=0 send_seq=29506 receive_seq=29506 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993011 heater_bed: target=80 temp=80.1 pwm=0.499 sd_pos=192186 sysload=0.23 cputime=76.232 memavail=7287820 print_time=2257.761 buffer_time=2.200 print_stall=0 extruder: target=240 temp=240.0 pwm=0.494
Stats 797033.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1395002 bytes_read=502495 bytes_retransmit=9 bytes_invalid=0 send_seq=29534 receive_seq=29534 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993067 heater_bed: target=80 temp=80.1 pwm=0.558 sd_pos=192215 sysload=0.23 cputime=76.289 memavail=7287820 print_time=2258.660 buffer_time=2.097 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 797034.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1399181 bytes_read=503197 bytes_retransmit=9 bytes_invalid=0 send_seq=29613 receive_seq=29613 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993056 heater_bed: target=80 temp=80.1 pwm=0.597 sd_pos=192768 sysload=0.21 cputime=76.361 memavail=7287820 print_time=2260.018 buffer_time=2.455 print_stall=0 extruder: target=240 temp=240.0 pwm=0.539
Stats 797035.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1402463 bytes_read=503800 bytes_retransmit=9 bytes_invalid=0 send_seq=29678 receive_seq=29678 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993044 heater_bed: target=80 temp=80.1 pwm=0.631 sd_pos=193304 sysload=0.21 cputime=76.421 memavail=7287820 print_time=2260.682 buffer_time=2.118 print_stall=0 extruder: target=240 temp=239.9 pwm=0.525
Stats 797036.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1406459 bytes_read=504439 bytes_retransmit=9 bytes_invalid=0 send_seq=29747 receive_seq=29747 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=2465 freq=119993041 heater_bed: target=80 temp=80.0 pwm=0.565 sd_pos=194720 sysload=0.21 cputime=76.515 memavail=7288324 print_time=2261.862 buffer_time=2.298 print_stall=0 extruder: target=240 temp=240.1 pwm=0.381
Stats 797037.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1411244 bytes_read=505161 bytes_retransmit=9 bytes_invalid=0 send_seq=29830 receive_seq=29830 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=4508 freq=119993031 heater_bed: target=80 temp=80.0 pwm=0.565 sd_pos=195790 sysload=0.21 cputime=76.618 memavail=7288324 print_time=2263.129 buffer_time=2.564 print_stall=0 extruder: target=240 temp=240.0 pwm=0.502
Stats 797038.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1416786 bytes_read=505914 bytes_retransmit=9 bytes_invalid=0 send_seq=29925 receive_seq=29925 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=1397 freq=119993021 heater_bed: target=80 temp=80.1 pwm=0.482 sd_pos=195994 sysload=0.21 cputime=76.710 memavail=7288324 print_time=2263.843 buffer_time=2.278 print_stall=0 extruder: target=240 temp=240.2 pwm=0.370
Stats 797039.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1419639 bytes_read=506452 bytes_retransmit=9 bytes_invalid=0 send_seq=29977 receive_seq=29977 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993016 heater_bed: target=80 temp=80.0 pwm=0.537 sd_pos=196024 sysload=0.20 cputime=76.775 memavail=7288100 print_time=2264.642 buffer_time=2.076 print_stall=0 extruder: target=240 temp=240.1 pwm=0.466
Stats 797040.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1421612 bytes_read=506969 bytes_retransmit=9 bytes_invalid=0 send_seq=30019 receive_seq=30019 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993014 heater_bed: target=80 temp=80.1 pwm=0.537 sd_pos=196245 sysload=0.20 cputime=76.835 memavail=7288100 print_time=2266.201 buffer_time=2.634 print_stall=0 extruder: target=240 temp=240.3 pwm=0.431
Stats 797041.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1422544 bytes_read=507393 bytes_retransmit=9 bytes_invalid=0 send_seq=30045 receive_seq=30045 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993008 heater_bed: target=80 temp=80.1 pwm=0.358 sd_pos=196396 sysload=0.20 cputime=76.885 memavail=7288100 print_time=2266.730 buffer_time=2.163 print_stall=0 extruder: target=240 temp=239.9 pwm=0.542
Stats 797042.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1424510 bytes_read=507881 bytes_retransmit=9 bytes_invalid=0 send_seq=30087 receive_seq=30087 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993001 heater_bed: target=80 temp=80.1 pwm=0.517 sd_pos=196638 sysload=0.20 cputime=76.947 memavail=7288100 print_time=2267.877 buffer_time=2.309 print_stall=0 extruder: target=240 temp=239.9 pwm=0.491
Stats 797043.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1425429 bytes_read=508303 bytes_retransmit=9 bytes_invalid=0 send_seq=30110 receive_seq=30110 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992992 heater_bed: target=80 temp=80.1 pwm=0.456 sd_pos=196697 sysload=0.20 cputime=77.004 memavail=7288100 print_time=2268.786 buffer_time=2.217 print_stall=0 extruder: target=240 temp=240.1 pwm=0.391
Stats 797044.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1426190 bytes_read=508696 bytes_retransmit=9 bytes_invalid=0 send_seq=30133 receive_seq=30133 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992985 heater_bed: target=80 temp=80.1 pwm=0.534 sd_pos=196782 sysload=0.18 cputime=77.050 memavail=7291144 print_time=2269.680 buffer_time=2.110 print_stall=0 extruder: target=240 temp=240.1 pwm=0.417
Stats 797045.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1429391 bytes_read=509279 bytes_retransmit=9 bytes_invalid=0 send_seq=30194 receive_seq=30194 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992978 heater_bed: target=80 temp=80.1 pwm=0.527 sd_pos=197242 sysload=0.18 cputime=77.124 memavail=7292864 print_time=2271.027 buffer_time=2.456 print_stall=0 extruder: target=240 temp=240.1 pwm=0.417
Stats 797046.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1430961 bytes_read=509771 bytes_retransmit=9 bytes_invalid=0 send_seq=30228 receive_seq=30228 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993002 heater_bed: target=80 temp=80.1 pwm=0.527 sd_pos=197546 sysload=0.18 cputime=77.175 memavail=7292392 print_time=2271.745 buffer_time=2.174 print_stall=0 extruder: target=240 temp=240.0 pwm=0.492
Stats 797047.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1432910 bytes_read=510254 bytes_retransmit=9 bytes_invalid=0 send_seq=30269 receive_seq=30269 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992999 heater_bed: target=80 temp=80.1 pwm=0.525 sd_pos=198130 sysload=0.18 cputime=77.239 memavail=7292392 print_time=2272.591 buffer_time=2.019 print_stall=0 extruder: target=240 temp=239.9 pwm=0.492
Stats 797048.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1435035 bytes_read=510757 bytes_retransmit=9 bytes_invalid=0 send_seq=30314 receive_seq=30314 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992993 heater_bed: target=80 temp=80.1 pwm=0.599 sd_pos=198470 sysload=0.18 cputime=77.294 memavail=7292392 print_time=2273.878 buffer_time=2.305 print_stall=0 extruder: target=240 temp=239.6 pwm=0.616
Stats 797049.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1440310 bytes_read=511544 bytes_retransmit=9 bytes_invalid=0 send_seq=30410 receive_seq=30410 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992988 heater_bed: target=80 temp=80.1 pwm=0.540 sd_pos=199344 sysload=0.16 cputime=77.373 memavail=7292392 print_time=2275.434 buffer_time=2.860 print_stall=0 extruder: target=240 temp=240.0 pwm=0.441
Stats 797050.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1443723 bytes_read=512152 bytes_retransmit=9 bytes_invalid=0 send_seq=30476 receive_seq=30476 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=388 freq=119992985 heater_bed: target=80 temp=80.1 pwm=0.482 sd_pos=199916 sysload=0.16 cputime=77.425 memavail=7292392 print_time=2276.095 buffer_time=2.521 print_stall=0 extruder: target=240 temp=239.7 pwm=0.530
Stats 797051.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1446112 bytes_read=512676 bytes_retransmit=9 bytes_invalid=0 send_seq=30522 receive_seq=30522 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=1597 freq=119992982 heater_bed: target=80 temp=80.1 pwm=0.591 sd_pos=200628 sysload=0.16 cputime=77.498 memavail=7292392 print_time=2276.696 buffer_time=2.122 print_stall=0 extruder: target=240 temp=240.1 pwm=0.418
Stats 797052.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1450623 bytes_read=513378 bytes_retransmit=9 bytes_invalid=0 send_seq=30601 receive_seq=30601 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=3664 freq=119992982 heater_bed: target=80 temp=80.1 pwm=0.529 sd_pos=202080 sysload=0.16 cputime=77.604 memavail=7292392 print_time=2277.920 buffer_time=2.345 print_stall=0 extruder: target=240 temp=240.1 pwm=0.488
Stats 797053.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1456611 bytes_read=514166 bytes_retransmit=9 bytes_invalid=0 send_seq=30703 receive_seq=30703 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=4571 freq=119992980 heater_bed: target=80 temp=80.1 pwm=0.529 sd_pos=203502 sysload=0.16 cputime=77.716 memavail=7293328 print_time=2279.127 buffer_time=2.552 print_stall=0 extruder: target=240 temp=240.1 pwm=0.488
Stats 797054.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1462156 bytes_read=514919 bytes_retransmit=9 bytes_invalid=0 send_seq=30798 receive_seq=30798 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=2665 freq=119992975 heater_bed: target=80 temp=80.1 pwm=0.529 sd_pos=204245 sysload=0.15 cputime=77.809 memavail=7291508 print_time=2279.710 buffer_time=2.134 print_stall=0 extruder: target=240 temp=239.8 pwm=0.543
Stats 797055.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1467778 bytes_read=515701 bytes_retransmit=9 bytes_invalid=0 send_seq=30893 receive_seq=30893 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=3973 freq=119993011 heater_bed: target=80 temp=80.1 pwm=0.629 sd_pos=205637 sysload=0.15 cputime=77.930 memavail=7293164 print_time=2281.019 buffer_time=2.441 print_stall=0 extruder: target=240 temp=239.9 pwm=0.471
Stats 797056.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1473905 bytes_read=516510 bytes_retransmit=9 bytes_invalid=0 send_seq=30996 receive_seq=30996 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1817 freq=119993004 heater_bed: target=80 temp=80.1 pwm=0.390 sd_pos=206358 sysload=0.15 cputime=78.028 memavail=7291028 print_time=2281.710 buffer_time=2.132 print_stall=0 extruder: target=240 temp=240.1 pwm=0.428
Stats 797057.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1479409 bytes_read=517273 bytes_retransmit=9 bytes_invalid=0 send_seq=31090 receive_seq=31090 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=2646 freq=119992998 heater_bed: target=80 temp=80.1 pwm=0.461 sd_pos=207282 sysload=0.15 cputime=78.149 memavail=7290132 print_time=2283.052 buffer_time=2.473 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 797058.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1484491 bytes_read=517990 bytes_retransmit=9 bytes_invalid=0 send_seq=31175 receive_seq=31175 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=866 freq=119993007 heater_bed: target=80 temp=80.1 pwm=0.466 sd_pos=207903 sysload=0.15 cputime=78.251 memavail=7291480 print_time=2283.635 buffer_time=2.056 print_stall=0 extruder: target=240 temp=240.2 pwm=0.405
Stats 797059.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1489481 bytes_read=518703 bytes_retransmit=9 bytes_invalid=0 send_seq=31262 receive_seq=31262 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2618 freq=119992997 heater_bed: target=80 temp=80.1 pwm=0.568 sd_pos=209313 sysload=0.14 cputime=78.361 memavail=7293200 print_time=2284.859 buffer_time=2.279 print_stall=0 extruder: target=240 temp=240.2 pwm=0.456
Stats 797060.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1494591 bytes_read=519426 bytes_retransmit=9 bytes_invalid=0 send_seq=31349 receive_seq=31348 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=5089 freq=119992993 heater_bed: target=80 temp=80.1 pwm=0.560 sd_pos=210593 sysload=0.14 cputime=78.474 memavail=7294768 print_time=2286.367 buffer_time=2.787 print_stall=0 extruder: target=240 temp=240.2 pwm=0.456
Stats 797061.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1500153 bytes_read=520219 bytes_retransmit=9 bytes_invalid=0 send_seq=31445 receive_seq=31445 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=2018 freq=119992987 heater_bed: target=80 temp=80.1 pwm=0.581 sd_pos=211326 sysload=0.14 cputime=78.585 memavail=7292980 print_time=2286.755 buffer_time=2.174 print_stall=0 extruder: target=240 temp=240.1 pwm=0.478
Stats 797062.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1504724 bytes_read=520887 bytes_retransmit=9 bytes_invalid=0 send_seq=31523 receive_seq=31523 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992987 heater_bed: target=80 temp=80.1 pwm=0.501 sd_pos=211520 sysload=0.14 cputime=78.672 memavail=7292084 print_time=2287.894 buffer_time=2.313 print_stall=0 extruder: target=240 temp=239.9 pwm=0.490
Stats 797063.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1505799 bytes_read=521320 bytes_retransmit=9 bytes_invalid=0 send_seq=31551 receive_seq=31551 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992977 heater_bed: target=80 temp=80.1 pwm=0.547 sd_pos=211579 sysload=0.14 cputime=78.740 memavail=7292848 print_time=2288.667 buffer_time=2.085 print_stall=0 extruder: target=240 temp=239.9 pwm=0.527
Stats 797064.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1507885 bytes_read=521822 bytes_retransmit=9 bytes_invalid=0 send_seq=31593 receive_seq=31593 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992986 heater_bed: target=80 temp=80.1 pwm=0.498 sd_pos=211789 sysload=0.13 cputime=78.805 memavail=7293624 print_time=2289.793 buffer_time=2.210 print_stall=0 extruder: target=240 temp=240.2 pwm=0.399
Stats 797065.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1509219 bytes_read=522250 bytes_retransmit=9 bytes_invalid=0 send_seq=31623 receive_seq=31623 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992977 heater_bed: target=80 temp=80.1 pwm=0.579 sd_pos=211847 sysload=0.13 cputime=78.871 memavail=7291592 print_time=2290.900 buffer_time=2.316 print_stall=0 extruder: target=240 temp=239.9 pwm=0.534
Stats 797066.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1513720 bytes_read=522979 bytes_retransmit=9 bytes_invalid=0 send_seq=31707 receive_seq=31707 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992970 heater_bed: target=80 temp=80.1 pwm=0.571 sd_pos=212506 sysload=0.13 cputime=78.942 memavail=7290456 print_time=2291.930 buffer_time=2.346 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 797067.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1517667 bytes_read=523645 bytes_retransmit=9 bytes_invalid=0 send_seq=31783 receive_seq=31783 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992968 heater_bed: target=80 temp=80.1 pwm=0.515 sd_pos=213108 sysload=0.13 cputime=79.015 memavail=7292844 print_time=2292.600 buffer_time=2.015 print_stall=0 extruder: target=240 temp=240.1 pwm=0.488
Stats 797068.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1521176 bytes_read=524241 bytes_retransmit=9 bytes_invalid=0 send_seq=31848 receive_seq=31848 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=3529 freq=119992968 heater_bed: target=80 temp=80.1 pwm=0.585 sd_pos=214310 sysload=0.13 cputime=79.118 memavail=7292844 print_time=2293.969 buffer_time=2.384 print_stall=0 extruder: target=240 temp=240.1 pwm=0.435
Stats 797069.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1526981 bytes_read=525020 bytes_retransmit=9 bytes_invalid=0 send_seq=31946 receive_seq=31946 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=1495 freq=119992967 heater_bed: target=80 temp=80.1 pwm=0.606 sd_pos=214917 sysload=0.12 cputime=79.223 memavail=7292844 print_time=2294.649 buffer_time=2.062 print_stall=0 extruder: target=240 temp=240.0 pwm=0.493
Stats 797070.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1532542 bytes_read=525782 bytes_retransmit=9 bytes_invalid=0 send_seq=32040 receive_seq=32040 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=690 freq=119992964 heater_bed: target=80 temp=80.1 pwm=0.397 sd_pos=215541 sysload=0.12 cputime=79.336 memavail=7292844 print_time=2295.857 buffer_time=2.270 print_stall=0 extruder: target=240 temp=240.3 pwm=0.319
Stats 797071.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1534660 bytes_read=526281 bytes_retransmit=9 bytes_invalid=0 send_seq=32081 receive_seq=32081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992961 heater_bed: target=80 temp=80.1 pwm=0.419 sd_pos=215599 sysload=0.12 cputime=79.404 memavail=7292596 print_time=2296.691 buffer_time=2.103 print_stall=0 extruder: target=240 temp=239.8 pwm=0.528
Stats 797072.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1536630 bytes_read=526779 bytes_retransmit=9 bytes_invalid=0 send_seq=32122 receive_seq=32122 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992964 heater_bed: target=80 temp=80.1 pwm=0.504 sd_pos=215820 sysload=0.12 cputime=79.478 memavail=7292596 print_time=2298.250 buffer_time=2.662 print_stall=0 extruder: target=240 temp=239.8 pwm=0.532
Stats 797073.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1537545 bytes_read=527196 bytes_retransmit=9 bytes_invalid=0 send_seq=32147 receive_seq=32147 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993027 heater_bed: target=80 temp=80.2 pwm=0.390 sd_pos=215971 sysload=0.12 cputime=79.542 memavail=7292596 print_time=2298.779 buffer_time=2.191 print_stall=0 extruder: target=240 temp=240.1 pwm=0.391
Stats 797074.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1539514 bytes_read=527684 bytes_retransmit=9 bytes_invalid=0 send_seq=32189 receive_seq=32189 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993020 heater_bed: target=80 temp=80.2 pwm=0.424 sd_pos=216213 sysload=0.11 cputime=79.605 memavail=7292596 print_time=2299.925 buffer_time=2.337 print_stall=0 extruder: target=240 temp=240.0 pwm=0.443
Stats 797075.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1540449 bytes_read=528102 bytes_retransmit=9 bytes_invalid=0 send_seq=32214 receive_seq=32214 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993012 heater_bed: target=80 temp=80.1 pwm=0.554 sd_pos=216272 sysload=0.11 cputime=79.667 memavail=7292312 print_time=2300.834 buffer_time=2.245 print_stall=0 extruder: target=240 temp=240.2 pwm=0.392
Stats 797076.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1541188 bytes_read=528519 bytes_retransmit=9 bytes_invalid=0 send_seq=32236 receive_seq=32236 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993005 heater_bed: target=80 temp=80.1 pwm=0.494 sd_pos=216357 sysload=0.11 cputime=79.733 memavail=7291808 print_time=2301.729 buffer_time=2.138 print_stall=0 extruder: target=240 temp=240.0 pwm=0.514
Stats 797077.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1544391 bytes_read=529107 bytes_retransmit=9 bytes_invalid=0 send_seq=32298 receive_seq=32298 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992997 heater_bed: target=80 temp=80.2 pwm=0.494 sd_pos=216819 sysload=0.11 cputime=79.802 memavail=7291808 print_time=2303.076 buffer_time=2.484 print_stall=0 extruder: target=240 temp=239.9 pwm=0.521
Stats 797078.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1545955 bytes_read=529570 bytes_retransmit=9 bytes_invalid=0 send_seq=32332 receive_seq=32332 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992997 heater_bed: target=80 temp=80.2 pwm=0.523 sd_pos=217123 sysload=0.11 cputime=79.867 memavail=7291808 print_time=2303.794 buffer_time=2.202 print_stall=0 extruder: target=240 temp=240.0 pwm=0.461
Stats 797079.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1547950 bytes_read=530072 bytes_retransmit=9 bytes_invalid=0 send_seq=32374 receive_seq=32374 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992988 heater_bed: target=80 temp=80.2 pwm=0.430 sd_pos=217706 sysload=0.10 cputime=79.933 memavail=7291808 print_time=2304.640 buffer_time=2.046 print_stall=0 extruder: target=240 temp=240.1 pwm=0.420
Stats 797080.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1550007 bytes_read=530575 bytes_retransmit=9 bytes_invalid=0 send_seq=32419 receive_seq=32419 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992989 heater_bed: target=80 temp=80.2 pwm=0.495 sd_pos=218058 sysload=0.10 cputime=79.984 memavail=7291808 print_time=2305.927 buffer_time=2.333 print_stall=0 extruder: target=240 temp=240.1 pwm=0.432
Stats 797081.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1552822 bytes_read=531168 bytes_retransmit=9 bytes_invalid=0 send_seq=32476 receive_seq=32476 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992982 heater_bed: target=80 temp=80.2 pwm=0.511 sd_pos=218528 sysload=0.10 cputime=80.062 memavail=7291808 print_time=2306.846 buffer_time=2.251 print_stall=0 extruder: target=240 temp=240.3 pwm=0.344
Stats 797082.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1558851 bytes_read=532005 bytes_retransmit=9 bytes_invalid=0 send_seq=32585 receive_seq=32585 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1241 freq=119993026 heater_bed: target=80 temp=80.2 pwm=0.511 sd_pos=219814 sysload=0.10 cputime=80.151 memavail=7291808 print_time=2308.224 buffer_time=2.628 print_stall=0 extruder: target=240 temp=240.1 pwm=0.427
Stats 797083.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1561252 bytes_read=532513 bytes_retransmit=9 bytes_invalid=0 send_seq=32631 receive_seq=32631 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=2707 freq=119993014 heater_bed: target=80 temp=80.2 pwm=0.441 sd_pos=220452 sysload=0.10 cputime=80.227 memavail=7291808 print_time=2308.926 buffer_time=2.330 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 797084.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1566373 bytes_read=533246 bytes_retransmit=9 bytes_invalid=0 send_seq=32719 receive_seq=32719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=1581 freq=119993009 heater_bed: target=80 temp=80.1 pwm=0.556 sd_pos=221205 sysload=0.09 cputime=80.332 memavail=7291808 print_time=2309.611 buffer_time=2.014 print_stall=0 extruder: target=240 temp=240.0 pwm=0.493
Stats 797085.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1571935 bytes_read=534013 bytes_retransmit=9 bytes_invalid=0 send_seq=32814 receive_seq=32814 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=2952 freq=119993011 heater_bed: target=80 temp=80.1 pwm=0.556 sd_pos=222620 sysload=0.09 cputime=80.452 memavail=7291808 print_time=2310.849 buffer_time=2.251 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 797086.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1577417 bytes_read=534777 bytes_retransmit=9 bytes_invalid=0 send_seq=32908 receive_seq=32908 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=3985 freq=119993006 heater_bed: target=80 temp=80.1 pwm=0.488 sd_pos=223703 sysload=0.09 cputime=80.574 memavail=7290800 print_time=2312.246 buffer_time=2.647 print_stall=0 extruder: target=240 temp=239.8 pwm=0.544
Stats 797087.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1583180 bytes_read=535565 bytes_retransmit=9 bytes_invalid=0 send_seq=33007 receive_seq=33007 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=2405 freq=119992997 heater_bed: target=80 temp=80.1 pwm=0.610 sd_pos=224400 sysload=0.09 cputime=80.681 memavail=7288288 print_time=2312.938 buffer_time=2.337 print_stall=0 extruder: target=240 temp=239.9 pwm=0.479
Stats 797088.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1588168 bytes_read=536292 bytes_retransmit=9 bytes_invalid=0 send_seq=33094 receive_seq=33094 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=927 freq=119992990 heater_bed: target=80 temp=80.1 pwm=0.547 sd_pos=224937 sysload=0.09 cputime=80.783 memavail=7292260 print_time=2313.692 buffer_time=2.087 print_stall=0 extruder: target=240 temp=240.0 pwm=0.458
Stats 797089.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1593526 bytes_read=537035 bytes_retransmit=9 bytes_invalid=0 send_seq=33187 receive_seq=33187 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=2640 freq=119992983 heater_bed: target=80 temp=80.1 pwm=0.497 sd_pos=226343 sysload=0.08 cputime=80.854 memavail=7292260 print_time=2315.029 buffer_time=2.423 print_stall=0 extruder: target=240 temp=240.1 pwm=0.462
Stats 797090.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1598300 bytes_read=537775 bytes_retransmit=9 bytes_invalid=0 send_seq=33271 receive_seq=33271 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1480 freq=119992969 heater_bed: target=80 temp=80.1 pwm=0.451 sd_pos=226782 sysload=0.08 cputime=80.915 memavail=7292260 print_time=2315.822 buffer_time=2.215 print_stall=0 extruder: target=240 temp=240.2 pwm=0.447
Stats 797091.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1603737 bytes_read=538537 bytes_retransmit=9 bytes_invalid=0 send_seq=33365 receive_seq=33365 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2627 freq=119992969 heater_bed: target=80 temp=80.1 pwm=0.451 sd_pos=228126 sysload=0.08 cputime=80.999 memavail=7292036 print_time=2317.101 buffer_time=2.494 print_stall=0 extruder: target=240 temp=239.8 pwm=0.599
Stats 797092.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1608449 bytes_read=539220 bytes_retransmit=9 bytes_invalid=0 send_seq=33446 receive_seq=33446 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1116 freq=119992972 heater_bed: target=80 temp=80.2 pwm=0.464 sd_pos=228817 sysload=0.08 cputime=81.057 memavail=7292036 print_time=2317.689 buffer_time=2.081 print_stall=0 extruder: target=240 temp=240.0 pwm=0.492
Stats 797093.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1613696 bytes_read=539958 bytes_retransmit=9 bytes_invalid=0 send_seq=33535 receive_seq=33535 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2945 freq=119992970 heater_bed: target=80 temp=80.1 pwm=0.525 sd_pos=230376 sysload=0.08 cputime=81.165 memavail=7292036 print_time=2319.030 buffer_time=2.420 print_stall=0 extruder: target=240 temp=240.1 pwm=0.409
Stats 797094.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1618770 bytes_read=540685 bytes_retransmit=9 bytes_invalid=0 send_seq=33622 receive_seq=33622 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=633 freq=119992969 heater_bed: target=80 temp=80.1 pwm=0.469 sd_pos=230967 sysload=0.08 cputime=81.256 memavail=7292036 print_time=2319.755 buffer_time=2.145 print_stall=0 extruder: target=240 temp=240.1 pwm=0.482
Stats 797095.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1621341 bytes_read=541213 bytes_retransmit=9 bytes_invalid=0 send_seq=33672 receive_seq=33672 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993035 heater_bed: target=80 temp=80.1 pwm=0.440 sd_pos=231053 sysload=0.08 cputime=81.316 memavail=7292036 print_time=2320.747 buffer_time=2.135 print_stall=0 extruder: target=240 temp=240.1 pwm=0.402
Stats 797096.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1623109 bytes_read=541707 bytes_retransmit=9 bytes_invalid=0 send_seq=33709 receive_seq=33709 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993028 heater_bed: target=80 temp=80.1 pwm=0.481 sd_pos=231223 sysload=0.08 cputime=81.371 memavail=7292040 print_time=2321.646 buffer_time=2.032 print_stall=0 extruder: target=240 temp=240.1 pwm=0.472
Stats 797097.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1624446 bytes_read=542154 bytes_retransmit=9 bytes_invalid=0 send_seq=33740 receive_seq=33740 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993017 heater_bed: target=80 temp=80.1 pwm=0.481 sd_pos=231310 sysload=0.08 cputime=81.426 memavail=7292040 print_time=2323.015 buffer_time=2.401 print_stall=0 extruder: target=240 temp=240.3 pwm=0.401
Stats 797098.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1629137 bytes_read=542862 bytes_retransmit=9 bytes_invalid=0 send_seq=33826 receive_seq=33826 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993016 heater_bed: target=80 temp=80.1 pwm=0.589 sd_pos=231994 sysload=0.08 cputime=81.489 memavail=7292040 print_time=2324.454 buffer_time=2.839 print_stall=0 extruder: target=240 temp=240.6 pwm=0.246
Stats 797099.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1632880 bytes_read=543515 bytes_retransmit=9 bytes_invalid=0 send_seq=33898 receive_seq=33898 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119993049 heater_bed: target=80 temp=80.1 pwm=0.554 sd_pos=232626 sysload=0.07 cputime=81.554 memavail=7292040 print_time=2325.098 buffer_time=2.483 print_stall=0 extruder: target=240 temp=239.9 pwm=0.520
Stats 797100.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1634662 bytes_read=543992 bytes_retransmit=9 bytes_invalid=0 send_seq=33935 receive_seq=33935 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1678 freq=119993043 heater_bed: target=80 temp=80.1 pwm=0.554 sd_pos=233253 sysload=0.07 cputime=81.617 memavail=7292040 print_time=2325.742 buffer_time=2.126 print_stall=0 extruder: target=240 temp=239.7 pwm=0.557
Stats 797101.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1639822 bytes_read=544736 bytes_retransmit=9 bytes_invalid=0 send_seq=34025 receive_seq=34025 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=3022 freq=119993035 heater_bed: target=80 temp=80.1 pwm=0.554 sd_pos=234543 sysload=0.07 cputime=81.723 memavail=7292040 print_time=2327.027 buffer_time=2.410 print_stall=0 extruder: target=240 temp=239.9 pwm=0.476
Stats 797102.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1645384 bytes_read=545499 bytes_retransmit=9 bytes_invalid=0 send_seq=34119 receive_seq=34119 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=1490 freq=119993029 heater_bed: target=80 temp=80.1 pwm=0.480 sd_pos=235022 sysload=0.07 cputime=81.825 memavail=7292040 print_time=2328.080 buffer_time=2.462 print_stall=0 extruder: target=240 temp=239.9 pwm=0.420
Stats 797103.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1648407 bytes_read=546073 bytes_retransmit=9 bytes_invalid=0 send_seq=34177 receive_seq=34177 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993022 heater_bed: target=80 temp=80.1 pwm=0.516 sd_pos=235080 sysload=0.07 cputime=81.891 memavail=7292040 print_time=2328.914 buffer_time=2.295 print_stall=0 extruder: target=240 temp=240.0 pwm=0.427
Stats 797104.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1650381 bytes_read=546554 bytes_retransmit=9 bytes_invalid=0 send_seq=34219 receive_seq=34219 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993093 heater_bed: target=80 temp=80.0 pwm=0.593 sd_pos=235301 sysload=0.14 cputime=81.956 memavail=7292040 print_time=2330.473 buffer_time=2.853 print_stall=0 extruder: target=240 temp=240.1 pwm=0.420
Stats 797105.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1651283 bytes_read=546975 bytes_retransmit=9 bytes_invalid=0 send_seq=34245 receive_seq=34245 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119993077 heater_bed: target=80 temp=80.1 pwm=0.470 sd_pos=235452 sysload=0.14 cputime=82.012 memavail=7291712 print_time=2331.002 buffer_time=2.381 print_stall=0 extruder: target=240 temp=239.9 pwm=0.531
Stats 797106.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1653294 bytes_read=547498 bytes_retransmit=9 bytes_invalid=0 send_seq=34288 receive_seq=34288 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993067 heater_bed: target=80 temp=80.1 pwm=0.548 sd_pos=235694 sysload=0.14 cputime=82.068 memavail=7291532 print_time=2332.148 buffer_time=2.527 print_stall=0 extruder: target=240 temp=240.0 pwm=0.477
Stats 797107.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1654168 bytes_read=547896 bytes_retransmit=9 bytes_invalid=0 send_seq=34312 receive_seq=34312 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119993054 heater_bed: target=80 temp=80.1 pwm=0.548 sd_pos=235753 sysload=0.14 cputime=82.125 memavail=7291532 print_time=2333.057 buffer_time=2.435 print_stall=0 extruder: target=240 temp=240.1 pwm=0.445
Stats 797108.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1654918 bytes_read=548289 bytes_retransmit=9 bytes_invalid=0 send_seq=34332 receive_seq=34332 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119993051 heater_bed: target=80 temp=80.0 pwm=0.547 sd_pos=235838 sysload=0.14 cputime=82.176 memavail=7291532 print_time=2333.952 buffer_time=2.329 print_stall=0 extruder: target=240 temp=239.9 pwm=0.503
Stats 797109.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1658135 bytes_read=548896 bytes_retransmit=9 bytes_invalid=0 send_seq=34395 receive_seq=34395 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993036 heater_bed: target=80 temp=80.1 pwm=0.473 sd_pos=236298 sysload=0.13 cputime=82.243 memavail=7291532 print_time=2335.299 buffer_time=2.675 print_stall=0 extruder: target=240 temp=240.1 pwm=0.484
Stats 797110.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=1659656 bytes_read=549349 bytes_retransmit=9 bytes_invalid=0 send_seq=34430 receive_seq=34430 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119993098 heater_bed: target=80 temp=80.1 pwm=0.473 sd_pos=236602 sysload=0.13 cputime=82.297 memavail=7291532 print_time=2336.017 buffer_time=2.392 print_stall=0 extruder: target=240 temp=240.4 pwm=0.288
Stats 797111.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1661637 bytes_read=549857 bytes_retransmit=9 bytes_invalid=0 send_seq=34470 receive_seq=34470 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993083 heater_bed: target=80 temp=80.1 pwm=0.381 sd_pos=237186 sysload=0.13 cputime=82.361 memavail=7291532 print_time=2336.863 buffer_time=2.237 print_stall=0 extruder: target=240 temp=239.9 pwm=0.556
Stats 797112.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1662965 bytes_read=550304 bytes_retransmit=9 bytes_invalid=0 send_seq=34501 receive_seq=34501 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993070 heater_bed: target=80 temp=80.1 pwm=0.526 sd_pos=237382 sysload=0.13 cputime=82.424 memavail=7291308 print_time=2337.655 buffer_time=2.029 print_stall=0 extruder: target=240 temp=240.2 pwm=0.412
Stats 797113.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1666674 bytes_read=550937 bytes_retransmit=9 bytes_invalid=0 send_seq=34572 receive_seq=34572 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993108 heater_bed: target=80 temp=80.1 pwm=0.471 sd_pos=237992 sysload=0.13 cputime=82.500 memavail=7291308 print_time=2339.090 buffer_time=2.464 print_stall=0 extruder: target=240 temp=239.9 pwm=0.489
Stats 797114.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1670085 bytes_read=551555 bytes_retransmit=9 bytes_invalid=0 send_seq=34637 receive_seq=34637 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993095 heater_bed: target=80 temp=80.1 pwm=0.458 sd_pos=238664 sysload=0.12 cputime=82.561 memavail=7291308 print_time=2339.722 buffer_time=2.096 print_stall=0 extruder: target=240 temp=239.6 pwm=0.612
Stats 797115.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1674486 bytes_read=552252 bytes_retransmit=9 bytes_invalid=0 send_seq=34718 receive_seq=34718 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=2343 freq=119993079 heater_bed: target=80 temp=80.1 pwm=0.464 sd_pos=240029 sysload=0.12 cputime=82.662 memavail=7291084 print_time=2341.032 buffer_time=2.405 print_stall=0 extruder: target=240 temp=239.7 pwm=0.507
Stats 797116.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=1679123 bytes_read=552941 bytes_retransmit=9 bytes_invalid=0 send_seq=34797 receive_seq=34797 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=1418 freq=119993067 heater_bed: target=80 temp=80.1 pwm=0.559 sd_pos=240781 sysload=0.12 cputime=82.759 memavail=7290836 print_time=2341.656 buffer_time=2.028 print_stall=0 extruder: target=240 temp=240.2 pwm=0.320
Stats 797117.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=1684592 bytes_read=553704 bytes_retransmit=9 bytes_invalid=0 send_seq=34891 receive_seq=34891 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=2499 freq=119993093 heater_bed: target=80 temp=80.1 pwm=0.469 sd_pos=242310 sysload=0.12 cputime=82.885 memavail=7290868 print_time=2342.850 buffer_time=2.221 print_stall=0 extruder: target=240 temp=240.1 pwm=0.444
Stats 797118.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=1690035 bytes_read=554456 bytes_retransmit=9 bytes_invalid=0 send_seq=34983 receive_seq=34983 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=3175 freq=119993077 heater_bed: target=80 temp=80.1 pwm=0.496 sd_pos=243447 sysload=0.12 cputime=82.996 memavail=7290868 print_time=2344.184 buffer_time=2.555 print_stall=0 extruder: target=240 temp=240.1 pwm=0.467
Stats 797119.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=1695675 bytes_read=555214 bytes_retransmit=9 bytes_invalid=0 send_seq=35079 receive_seq=35079 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=1144 freq=119993059 heater_bed: target=80 temp=80.1 pwm=0.552 sd_pos=243942 sysload=0.11 cputime=83.097 memavail=7290868 print_time=2344.911 buffer_time=2.282 print_stall=0 extruder: target=240 temp=239.8 pwm=0.632
Stats 797120.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=1700027 bytes_read=555882 bytes_retransmit=9 bytes_invalid=0 send_seq=35154 receive_seq=35154 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=3492 freq=119993048 heater_bed: target=80 temp=80.1 pwm=0.553 sd_pos=245432 sysload=0.11 cputime=83.208 memavail=7290644 print_time=2346.250 buffer_time=2.620 print_stall=0 extruder: target=240 temp=239.8 pwm=0.527
Stats 797121.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1705463 bytes_read=556650 bytes_retransmit=9 bytes_invalid=0 send_seq=35246 receive_seq=35246 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=939 freq=119993038 heater_bed: target=80 temp=80.1 pwm=0.553 sd_pos=245974 sysload=0.11 cputime=83.317 memavail=7290644 print_time=2346.769 buffer_time=2.138 print_stall=0 extruder: target=240 temp=240.2 pwm=0.329
Stats 797122.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1710220 bytes_read=557333 bytes_retransmit=9 bytes_invalid=0 send_seq=35327 receive_seq=35327 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=2759 freq=119993029 heater_bed: target=80 temp=80.1 pwm=0.440 sd_pos=247431 sysload=0.11 cputime=83.423 memavail=7290644 print_time=2348.215 buffer_time=2.584 print_stall=0 extruder: target=240 temp=240.2 pwm=0.360
Stats 797123.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1715601 bytes_read=558086 bytes_retransmit=9 bytes_invalid=0 send_seq=35419 receive_seq=35419 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=914 freq=119993017 heater_bed: target=80 temp=80.1 pwm=0.564 sd_pos=248221 sysload=0.11 cputime=83.520 memavail=7290644 print_time=2348.894 buffer_time=2.263 print_stall=0 extruder: target=240 temp=240.3 pwm=0.410
Stats 797124.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1719978 bytes_read=558763 bytes_retransmit=9 bytes_invalid=0 send_seq=35496 receive_seq=35496 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2597 freq=119993016 heater_bed: target=80 temp=80.0 pwm=0.564 sd_pos=249734 sysload=0.10 cputime=83.633 memavail=7290644 print_time=2350.086 buffer_time=2.453 print_stall=0 extruder: target=240 temp=240.0 pwm=0.541
Stats 797125.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1724869 bytes_read=559466 bytes_retransmit=9 bytes_invalid=0 send_seq=35581 receive_seq=35581 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=428 freq=119993007 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=250328 sysload=0.10 cputime=83.736 memavail=7290644 print_time=2350.813 buffer_time=2.180 print_stall=0 extruder: target=240 temp=240.0 pwm=0.483
Stats 797126.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1727169 bytes_read=559995 bytes_retransmit=9 bytes_invalid=0 send_seq=35625 receive_seq=35625 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119993030 heater_bed: target=80 temp=80.0 pwm=0.545 sd_pos=250414 sysload=0.10 cputime=83.801 memavail=7289892 print_time=2351.804 buffer_time=2.170 print_stall=0 extruder: target=240 temp=239.8 pwm=0.584
Stats 797127.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1729042 bytes_read=560487 bytes_retransmit=9 bytes_invalid=0 send_seq=35665 receive_seq=35665 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993015 heater_bed: target=80 temp=80.0 pwm=0.550 sd_pos=250584 sysload=0.10 cputime=83.862 memavail=7289892 print_time=2352.704 buffer_time=2.069 print_stall=0 extruder: target=240 temp=240.2 pwm=0.402
Stats 797128.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1730330 bytes_read=560915 bytes_retransmit=9 bytes_invalid=0 send_seq=35695 receive_seq=35695 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119993005 heater_bed: target=80 temp=80.1 pwm=0.431 sd_pos=250671 sysload=0.10 cputime=83.921 memavail=7289892 print_time=2354.073 buffer_time=2.437 print_stall=0 extruder: target=240 temp=240.1 pwm=0.491
Stats 797129.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1735049 bytes_read=561643 bytes_retransmit=9 bytes_invalid=0 send_seq=35782 receive_seq=35782 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992996 heater_bed: target=80 temp=80.1 pwm=0.521 sd_pos=251365 sysload=0.18 cputime=83.995 memavail=7289892 print_time=2355.513 buffer_time=2.877 print_stall=0 extruder: target=240 temp=239.9 pwm=0.504
Stats 797130.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1738793 bytes_read=562295 bytes_retransmit=9 bytes_invalid=0 send_seq=35854 receive_seq=35854 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992989 heater_bed: target=80 temp=80.0 pwm=0.633 sd_pos=252026 sysload=0.18 cputime=84.067 memavail=7289892 print_time=2356.159 buffer_time=2.522 print_stall=0 extruder: target=240 temp=240.0 pwm=0.428
Stats 797131.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1740465 bytes_read=562769 bytes_retransmit=9 bytes_invalid=0 send_seq=35890 receive_seq=35890 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1789 freq=119992981 heater_bed: target=80 temp=80.0 pwm=0.519 sd_pos=252678 sysload=0.18 cputime=84.137 memavail=7289892 print_time=2356.803 buffer_time=2.166 print_stall=0 extruder: target=240 temp=240.0 pwm=0.428
Stats 797132.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1745446 bytes_read=563492 bytes_retransmit=9 bytes_invalid=0 send_seq=35976 receive_seq=35976 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3159 freq=119992983 heater_bed: target=80 temp=80.0 pwm=0.503 sd_pos=254024 sysload=0.18 cputime=84.252 memavail=7289892 print_time=2358.067 buffer_time=2.429 print_stall=0 extruder: target=240 temp=240.3 pwm=0.386
Stats 797133.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1751129 bytes_read=564259 bytes_retransmit=9 bytes_invalid=0 send_seq=36071 receive_seq=36071 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=1206 freq=119992983 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=254417 sysload=0.18 cputime=84.362 memavail=7289892 print_time=2359.072 buffer_time=2.433 print_stall=0 extruder: target=240 temp=239.8 pwm=0.574
Stats 797134.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1753768 bytes_read=564792 bytes_retransmit=9 bytes_invalid=0 send_seq=36122 receive_seq=36122 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992976 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=254447 sysload=0.16 cputime=84.429 memavail=7289892 print_time=2359.871 buffer_time=2.232 print_stall=0 extruder: target=240 temp=239.5 pwm=0.641
Stats 797135.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1755726 bytes_read=565295 bytes_retransmit=9 bytes_invalid=0 send_seq=36164 receive_seq=36164 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992994 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=254668 sysload=0.16 cputime=84.512 memavail=7292684 print_time=2361.430 buffer_time=2.789 print_stall=0 extruder: target=240 temp=239.7 pwm=0.509
Stats 797136.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1756672 bytes_read=565733 bytes_retransmit=9 bytes_invalid=0 send_seq=36190 receive_seq=36190 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992982 heater_bed: target=80 temp=80.0 pwm=0.546 sd_pos=254819 sysload=0.16 cputime=84.578 memavail=7292432 print_time=2361.959 buffer_time=2.317 print_stall=0 extruder: target=240 temp=240.0 pwm=0.446
Stats 797137.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1758636 bytes_read=566221 bytes_retransmit=9 bytes_invalid=0 send_seq=36232 receive_seq=36232 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992972 heater_bed: target=80 temp=80.0 pwm=0.447 sd_pos=255061 sysload=0.16 cputime=84.647 memavail=7292180 print_time=2363.106 buffer_time=2.462 print_stall=0 extruder: target=240 temp=240.2 pwm=0.407
Stats 797138.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1759561 bytes_read=566633 bytes_retransmit=9 bytes_invalid=0 send_seq=36256 receive_seq=36256 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992961 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=255120 sysload=0.16 cputime=84.717 memavail=7292180 print_time=2364.015 buffer_time=2.371 print_stall=0 extruder: target=240 temp=240.1 pwm=0.407
Stats 797139.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1760349 bytes_read=567042 bytes_retransmit=9 bytes_invalid=0 send_seq=36281 receive_seq=36281 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992953 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=255205 sysload=0.15 cputime=84.771 memavail=7292436 print_time=2364.909 buffer_time=2.264 print_stall=0 extruder: target=240 temp=239.9 pwm=0.522
Stats 797140.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1763577 bytes_read=567633 bytes_retransmit=9 bytes_invalid=0 send_seq=36345 receive_seq=36345 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992985 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=255667 sysload=0.15 cputime=84.842 memavail=7291524 print_time=2366.256 buffer_time=2.609 print_stall=0 extruder: target=240 temp=240.1 pwm=0.450
Stats 797141.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1765167 bytes_read=568115 bytes_retransmit=9 bytes_invalid=0 send_seq=36380 receive_seq=36380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992980 heater_bed: target=80 temp=80.1 pwm=0.339 sd_pos=255971 sysload=0.15 cputime=84.907 memavail=7291076 print_time=2366.974 buffer_time=2.327 print_stall=0 extruder: target=240 temp=239.8 pwm=0.515
Stats 797142.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1767180 bytes_read=568627 bytes_retransmit=9 bytes_invalid=0 send_seq=36424 receive_seq=36424 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992971 heater_bed: target=80 temp=80.0 pwm=0.605 sd_pos=256554 sysload=0.15 cputime=84.978 memavail=7291076 print_time=2367.820 buffer_time=2.171 print_stall=0 extruder: target=240 temp=240.0 pwm=0.422
Stats 797143.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1769286 bytes_read=569125 bytes_retransmit=9 bytes_invalid=0 send_seq=36468 receive_seq=36468 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992964 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=256894 sysload=0.15 cputime=85.044 memavail=7291076 print_time=2369.107 buffer_time=2.458 print_stall=0 extruder: target=240 temp=239.7 pwm=0.545
Stats 797144.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1772140 bytes_read=569698 bytes_retransmit=9 bytes_invalid=0 send_seq=36524 receive_seq=36524 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992964 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=257376 sysload=0.14 cputime=85.118 memavail=7291076 print_time=2370.047 buffer_time=2.396 print_stall=0 extruder: target=240 temp=239.8 pwm=0.516
Stats 797145.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=1775503 bytes_read=570325 bytes_retransmit=9 bytes_invalid=0 send_seq=36591 receive_seq=36591 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992955 heater_bed: target=80 temp=80.0 pwm=0.544 sd_pos=258042 sysload=0.14 cputime=85.187 memavail=7291076 print_time=2370.657 buffer_time=2.006 print_stall=0 extruder: target=240 temp=239.9 pwm=0.471
Stats 797146.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1780124 bytes_read=571034 bytes_retransmit=9 bytes_invalid=0 send_seq=36674 receive_seq=36674 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1959 freq=119992946 heater_bed: target=80 temp=80.0 pwm=0.485 sd_pos=259490 sysload=0.14 cputime=85.280 memavail=7291076 print_time=2371.911 buffer_time=2.259 print_stall=0 extruder: target=240 temp=240.1 pwm=0.382
Stats 797147.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1785071 bytes_read=571757 bytes_retransmit=9 bytes_invalid=0 send_seq=36760 receive_seq=36760 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=3561 freq=119992937 heater_bed: target=80 temp=80.0 pwm=0.591 sd_pos=261056 sysload=0.14 cputime=85.395 memavail=7291076 print_time=2373.121 buffer_time=2.469 print_stall=0 extruder: target=240 temp=240.4 pwm=0.314
Stats 797148.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1790520 bytes_read=572514 bytes_retransmit=9 bytes_invalid=0 send_seq=36853 receive_seq=36853 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=2071 freq=119992931 heater_bed: target=80 temp=80.0 pwm=0.532 sd_pos=261905 sysload=0.14 cputime=85.498 memavail=7291076 print_time=2373.783 buffer_time=2.130 print_stall=0 extruder: target=240 temp=240.3 pwm=0.318
Stats 797149.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1796043 bytes_read=573272 bytes_retransmit=9 bytes_invalid=0 send_seq=36949 receive_seq=36949 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=2442 freq=119992924 heater_bed: target=80 temp=80.0 pwm=0.531 sd_pos=263019 sysload=0.12 cputime=85.605 memavail=7291076 print_time=2375.083 buffer_time=2.429 print_stall=0 extruder: target=240 temp=240.1 pwm=0.417
Stats 797150.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1801759 bytes_read=574045 bytes_retransmit=9 bytes_invalid=0 send_seq=37045 receive_seq=37045 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=380 freq=119992930 heater_bed: target=80 temp=80.1 pwm=0.431 sd_pos=263758 sysload=0.12 cputime=85.704 memavail=7291076 print_time=2375.721 buffer_time=2.066 print_stall=0 extruder: target=240 temp=240.2 pwm=0.368
Stats 797151.1: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1806185 bytes_read=574738 bytes_retransmit=9 bytes_invalid=0 send_seq=37123 receive_seq=37122 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2717 freq=119992939 heater_bed: target=80 temp=80.1 pwm=0.467 sd_pos=265074 sysload=0.12 cputime=85.811 memavail=7291076 print_time=2377.095 buffer_time=2.440 print_stall=0 extruder: target=240 temp=239.9 pwm=0.478
Stats 797152.1: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1811430 bytes_read=575487 bytes_retransmit=9 bytes_invalid=0 send_seq=37214 receive_seq=37214 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=719 freq=119992926 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=265539 sysload=0.12 cputime=85.911 memavail=7291076 print_time=2377.779 buffer_time=2.123 print_stall=0 extruder: target=240 temp=240.3 pwm=0.332
Stats 797153.1: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1816322 bytes_read=576205 bytes_retransmit=9 bytes_invalid=0 send_seq=37299 receive_seq=37299 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=1887 freq=119992922 heater_bed: target=80 temp=80.0 pwm=0.534 sd_pos=267038 sysload=0.12 cputime=86.021 memavail=7291076 print_time=2379.068 buffer_time=2.411 print_stall=0 extruder: target=240 temp=240.2 pwm=0.376
Stats 797154.1: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1821378 bytes_read=576932 bytes_retransmit=9 bytes_invalid=0 send_seq=37386 receive_seq=37386 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=2647 freq=119992919 heater_bed: target=80 temp=80.0 pwm=0.540 sd_pos=268655 sysload=0.11 cputime=86.131 memavail=7291084 print_time=2380.247 buffer_time=2.584 print_stall=0 extruder: target=240 temp=239.8 pwm=0.542
Stats 797155.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1826225 bytes_read=577641 bytes_retransmit=9 bytes_invalid=0 send_seq=37469 receive_seq=37469 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1425 freq=119992914 heater_bed: target=80 temp=80.0 pwm=0.531 sd_pos=269746 sysload=0.11 cputime=86.235 memavail=7291084 print_time=2380.891 buffer_time=2.228 print_stall=0 extruder: target=240 temp=239.8 pwm=0.540
Stats 797156.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1830566 bytes_read=578328 bytes_retransmit=9 bytes_invalid=0 send_seq=37545 receive_seq=37545 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992943 heater_bed: target=80 temp=80.1 pwm=0.409 sd_pos=269951 sysload=0.11 cputime=86.321 memavail=7291088 print_time=2382.137 buffer_time=2.473 print_stall=0 extruder: target=240 temp=239.9 pwm=0.482
Stats 797157.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1831613 bytes_read=578736 bytes_retransmit=9 bytes_invalid=0 send_seq=37571 receive_seq=37571 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992941 heater_bed: target=80 temp=80.1 pwm=0.396 sd_pos=270022 sysload=0.11 cputime=86.378 memavail=7291088 print_time=2382.911 buffer_time=2.245 print_stall=0 extruder: target=240 temp=240.1 pwm=0.470
Stats 797158.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1833391 bytes_read=579209 bytes_retransmit=9 bytes_invalid=0 send_seq=37610 receive_seq=37610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992936 heater_bed: target=80 temp=80.0 pwm=0.612 sd_pos=270192 sysload=0.11 cputime=86.443 memavail=7291088 print_time=2383.824 buffer_time=2.159 print_stall=0 extruder: target=240 temp=239.8 pwm=0.602
Stats 797159.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1834639 bytes_read=579671 bytes_retransmit=9 bytes_invalid=0 send_seq=37641 receive_seq=37641 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992932 heater_bed: target=80 temp=80.0 pwm=0.511 sd_pos=270221 sysload=0.10 cputime=86.501 memavail=7291088 print_time=2384.723 buffer_time=2.057 print_stall=0 extruder: target=240 temp=240.1 pwm=0.404
Stats 797160.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1839482 bytes_read=580404 bytes_retransmit=9 bytes_invalid=0 send_seq=37732 receive_seq=37732 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992929 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=270844 sysload=0.10 cputime=86.567 memavail=7291088 print_time=2386.169 buffer_time=2.502 print_stall=0 extruder: target=240 temp=239.9 pwm=0.510
Stats 797161.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1843180 bytes_read=581053 bytes_retransmit=9 bytes_invalid=0 send_seq=37803 receive_seq=37803 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992924 heater_bed: target=80 temp=80.0 pwm=0.617 sd_pos=271414 sysload=0.10 cputime=86.630 memavail=7291088 print_time=2386.825 buffer_time=2.157 print_stall=0 extruder: target=240 temp=240.3 pwm=0.401
Stats 797162.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1846489 bytes_read=581665 bytes_retransmit=9 bytes_invalid=0 send_seq=37864 receive_seq=37864 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=2887 freq=119992923 heater_bed: target=80 temp=80.0 pwm=0.599 sd_pos=272522 sysload=0.10 cputime=86.717 memavail=7291088 print_time=2388.100 buffer_time=2.431 print_stall=0 extruder: target=240 temp=240.1 pwm=0.525
Stats 797163.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1851948 bytes_read=582408 bytes_retransmit=9 bytes_invalid=0 send_seq=37957 receive_seq=37957 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=1050 freq=119992929 heater_bed: target=80 temp=79.9 pwm=0.623 sd_pos=273125 sysload=0.10 cputime=86.813 memavail=7291088 print_time=2388.808 buffer_time=2.139 print_stall=0 extruder: target=240 temp=239.5 pwm=0.756
Stats 797164.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1855954 bytes_read=583031 bytes_retransmit=9 bytes_invalid=0 send_seq=38026 receive_seq=38026 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992933 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=273372 sysload=0.10 cputime=86.904 memavail=7291088 print_time=2389.670 buffer_time=1.999 print_stall=0 extruder: target=240 temp=239.8 pwm=0.489
Stats 797165.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1857731 bytes_read=583528 bytes_retransmit=9 bytes_invalid=0 send_seq=38064 receive_seq=38064 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992970 heater_bed: target=80 temp=80.0 pwm=0.488 sd_pos=273402 sysload=0.10 cputime=86.968 memavail=7290788 print_time=2390.713 buffer_time=2.042 print_stall=0 extruder: target=240 temp=239.8 pwm=0.483
Stats 797166.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1859237 bytes_read=584002 bytes_retransmit=9 bytes_invalid=0 send_seq=38100 receive_seq=38100 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992969 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=273623 sysload=0.10 cputime=87.027 memavail=7290036 print_time=2392.028 buffer_time=2.356 print_stall=0 extruder: target=240 temp=240.1 pwm=0.337
Stats 797167.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1861287 bytes_read=584495 bytes_retransmit=9 bytes_invalid=0 send_seq=38143 receive_seq=38143 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992959 heater_bed: target=80 temp=80.0 pwm=0.356 sd_pos=273957 sysload=0.10 cputime=87.085 memavail=7290036 print_time=2392.836 buffer_time=2.163 print_stall=0 extruder: target=240 temp=240.4 pwm=0.284
Stats 797168.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1862097 bytes_read=584912 bytes_retransmit=9 bytes_invalid=0 send_seq=38165 receive_seq=38165 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992966 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=274016 sysload=0.10 cputime=87.141 memavail=7290036 print_time=2393.703 buffer_time=2.030 print_stall=0 extruder: target=240 temp=240.6 pwm=0.259
Stats 797169.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1863527 bytes_read=585360 bytes_retransmit=9 bytes_invalid=0 send_seq=38199 receive_seq=38199 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992962 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=274160 sysload=0.09 cputime=87.204 memavail=7290036 print_time=2395.506 buffer_time=2.833 print_stall=0 extruder: target=240 temp=239.7 pwm=0.672
Stats 797170.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1864514 bytes_read=585768 bytes_retransmit=9 bytes_invalid=0 send_seq=38225 receive_seq=38225 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992955 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=274298 sysload=0.09 cputime=87.255 memavail=7290036 print_time=2395.736 buffer_time=2.061 print_stall=0 extruder: target=240 temp=239.6 pwm=0.642
Stats 797171.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1867026 bytes_read=586345 bytes_retransmit=9 bytes_invalid=0 send_seq=38276 receive_seq=38276 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992948 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=274620 sysload=0.09 cputime=87.321 memavail=7290036 print_time=2396.854 buffer_time=2.179 print_stall=0 extruder: target=240 temp=239.6 pwm=0.588
Stats 797172.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1869344 bytes_read=586858 bytes_retransmit=9 bytes_invalid=0 send_seq=38323 receive_seq=38323 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992942 heater_bed: target=80 temp=80.0 pwm=0.539 sd_pos=275149 sysload=0.09 cputime=87.391 memavail=7290036 print_time=2397.996 buffer_time=2.320 print_stall=0 extruder: target=240 temp=239.8 pwm=0.458
Stats 797173.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1871630 bytes_read=587361 bytes_retransmit=9 bytes_invalid=0 send_seq=38368 receive_seq=38368 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992940 heater_bed: target=80 temp=80.1 pwm=0.348 sd_pos=275704 sysload=0.09 cputime=87.451 memavail=7290036 print_time=2399.209 buffer_time=2.533 print_stall=0 extruder: target=240 temp=239.7 pwm=0.548
Stats 797174.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1872690 bytes_read=587799 bytes_retransmit=9 bytes_invalid=0 send_seq=38395 receive_seq=38395 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992996 heater_bed: target=80 temp=80.0 pwm=0.538 sd_pos=275848 sysload=0.08 cputime=87.502 memavail=7290036 print_time=2399.704 buffer_time=2.028 print_stall=0 extruder: target=240 temp=240.1 pwm=0.410
Stats 797175.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=1878721 bytes_read=588625 bytes_retransmit=9 bytes_invalid=0 send_seq=38506 receive_seq=38506 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992986 heater_bed: target=80 temp=80.0 pwm=0.654 sd_pos=276897 sysload=0.08 cputime=87.577 memavail=7290036 print_time=2401.289 buffer_time=2.612 print_stall=0 extruder: target=240 temp=240.2 pwm=0.413
Stats 797176.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1882002 bytes_read=589243 bytes_retransmit=9 bytes_invalid=0 send_seq=38569 receive_seq=38569 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992978 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=277457 sysload=0.08 cputime=87.651 memavail=7289788 print_time=2401.899 buffer_time=2.220 print_stall=0 extruder: target=240 temp=240.1 pwm=0.476
Stats 797177.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1885279 bytes_read=589835 bytes_retransmit=9 bytes_invalid=0 send_seq=38629 receive_seq=38629 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=3372 freq=119992970 heater_bed: target=80 temp=80.1 pwm=0.427 sd_pos=278787 sysload=0.08 cputime=87.750 memavail=7289788 print_time=2403.208 buffer_time=2.530 print_stall=0 extruder: target=240 temp=240.2 pwm=0.418
Stats 797178.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1890561 bytes_read=590568 bytes_retransmit=9 bytes_invalid=0 send_seq=38720 receive_seq=38720 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1681 freq=119992969 heater_bed: target=80 temp=80.1 pwm=0.440 sd_pos=279445 sysload=0.08 cputime=87.844 memavail=7289564 print_time=2403.807 buffer_time=2.128 print_stall=0 extruder: target=240 temp=239.8 pwm=0.523
Stats 797179.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1895904 bytes_read=591321 bytes_retransmit=9 bytes_invalid=0 send_seq=38813 receive_seq=38812 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2128 freq=119992963 heater_bed: target=80 temp=80.0 pwm=0.599 sd_pos=280501 sysload=0.15 cputime=87.951 memavail=7289564 print_time=2405.070 buffer_time=2.391 print_stall=0 extruder: target=240 temp=239.7 pwm=0.523
Stats 797180.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1901304 bytes_read=592078 bytes_retransmit=9 bytes_invalid=0 send_seq=38905 receive_seq=38905 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=3107 freq=119992957 heater_bed: target=80 temp=80.0 pwm=0.522 sd_pos=281768 sysload=0.15 cputime=88.059 memavail=7289564 print_time=2406.321 buffer_time=2.642 print_stall=0 extruder: target=240 temp=240.0 pwm=0.356
Stats 797181.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1905980 bytes_read=592772 bytes_retransmit=9 bytes_invalid=0 send_seq=38985 receive_seq=38985 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=2087 freq=119992960 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=282263 sysload=0.15 cputime=88.151 memavail=7289564 print_time=2407.091 buffer_time=2.411 print_stall=0 extruder: target=240 temp=240.0 pwm=0.400
Stats 797182.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1910971 bytes_read=593495 bytes_retransmit=9 bytes_invalid=0 send_seq=39071 receive_seq=39071 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=583 freq=119992956 heater_bed: target=80 temp=80.0 pwm=0.508 sd_pos=282922 sysload=0.15 cputime=88.251 memavail=7289564 print_time=2407.690 buffer_time=2.009 print_stall=0 extruder: target=240 temp=240.1 pwm=0.337
Stats 797183.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1916100 bytes_read=594222 bytes_retransmit=9 bytes_invalid=0 send_seq=39158 receive_seq=39158 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1498 freq=119992953 heater_bed: target=80 temp=80.0 pwm=0.560 sd_pos=283951 sysload=0.15 cputime=88.362 memavail=7289564 print_time=2409.052 buffer_time=2.370 print_stall=0 extruder: target=240 temp=240.1 pwm=0.443
Stats 797184.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1921260 bytes_read=594940 bytes_retransmit=9 bytes_invalid=0 send_seq=39246 receive_seq=39246 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1980 freq=119992945 heater_bed: target=80 temp=80.0 pwm=0.560 sd_pos=285248 sysload=0.14 cputime=88.457 memavail=7289564 print_time=2410.221 buffer_time=2.540 print_stall=0 extruder: target=240 temp=239.9 pwm=0.581
Stats 797185.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1925610 bytes_read=595618 bytes_retransmit=9 bytes_invalid=0 send_seq=39323 receive_seq=39323 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=776 freq=119992944 heater_bed: target=80 temp=80.0 pwm=0.560 sd_pos=285969 sysload=0.14 cputime=88.546 memavail=7289564 print_time=2410.792 buffer_time=2.110 print_stall=0 extruder: target=240 temp=240.1 pwm=0.488
Stats 797186.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1930239 bytes_read=596331 bytes_retransmit=9 bytes_invalid=0 send_seq=39404 receive_seq=39404 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992934 heater_bed: target=80 temp=80.0 pwm=0.522 sd_pos=286812 sysload=0.14 cputime=88.646 memavail=7289568 print_time=2411.781 buffer_time=2.098 print_stall=0 extruder: target=240 temp=239.8 pwm=0.559
Stats 797187.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1932363 bytes_read=596829 bytes_retransmit=9 bytes_invalid=0 send_seq=39448 receive_seq=39448 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992967 heater_bed: target=80 temp=80.0 pwm=0.446 sd_pos=286898 sysload=0.14 cputime=88.708 memavail=7289568 print_time=2412.822 buffer_time=2.139 print_stall=0 extruder: target=240 temp=240.1 pwm=0.384
Stats 797188.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1934150 bytes_read=597322 bytes_retransmit=9 bytes_invalid=0 send_seq=39488 receive_seq=39488 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992961 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=287069 sysload=0.14 cputime=88.770 memavail=7289568 print_time=2413.723 buffer_time=2.039 print_stall=0 extruder: target=240 temp=240.1 pwm=0.390
Stats 797189.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1935528 bytes_read=597769 bytes_retransmit=9 bytes_invalid=0 send_seq=39519 receive_seq=39519 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992954 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=287168 sysload=0.13 cputime=88.827 memavail=7289568 print_time=2415.092 buffer_time=2.408 print_stall=0 extruder: target=240 temp=240.2 pwm=0.411
Stats 797190.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1940329 bytes_read=598497 bytes_retransmit=9 bytes_invalid=0 send_seq=39609 receive_seq=39609 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992960 heater_bed: target=80 temp=80.0 pwm=0.571 sd_pos=287751 sysload=0.13 cputime=88.908 memavail=7289568 print_time=2416.547 buffer_time=2.863 print_stall=0 extruder: target=240 temp=240.1 pwm=0.558
Stats 797191.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1943936 bytes_read=599161 bytes_retransmit=9 bytes_invalid=0 send_seq=39680 receive_seq=39680 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992956 heater_bed: target=80 temp=80.0 pwm=0.597 sd_pos=288178 sysload=0.13 cputime=88.976 memavail=7289344 print_time=2417.191 buffer_time=2.506 print_stall=0 extruder: target=240 temp=240.1 pwm=0.445
Stats 797192.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1945797 bytes_read=599648 bytes_retransmit=9 bytes_invalid=0 send_seq=39719 receive_seq=39719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1432 freq=119992952 heater_bed: target=80 temp=79.9 pwm=0.567 sd_pos=288596 sysload=0.13 cputime=89.045 memavail=7289344 print_time=2417.836 buffer_time=2.150 print_stall=0 extruder: target=240 temp=239.9 pwm=0.498
Stats 797193.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1950802 bytes_read=600361 bytes_retransmit=9 bytes_invalid=0 send_seq=39806 receive_seq=39806 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=3187 freq=119992950 heater_bed: target=80 temp=79.9 pwm=0.567 sd_pos=289524 sysload=0.13 cputime=89.150 memavail=7289344 print_time=2419.284 buffer_time=2.598 print_stall=0 extruder: target=240 temp=239.7 pwm=0.589
Stats 797194.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1956156 bytes_read=601104 bytes_retransmit=9 bytes_invalid=0 send_seq=39897 receive_seq=39896 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=766 freq=119992943 heater_bed: target=80 temp=79.9 pwm=0.501 sd_pos=289773 sysload=0.12 cputime=89.264 memavail=7289728 print_time=2420.101 buffer_time=2.412 print_stall=0 extruder: target=240 temp=239.9 pwm=0.499
Stats 797195.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1958283 bytes_read=601616 bytes_retransmit=9 bytes_invalid=0 send_seq=39940 receive_seq=39940 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992946 heater_bed: target=80 temp=79.9 pwm=0.585 sd_pos=289803 sysload=0.12 cputime=89.328 memavail=7289792 print_time=2420.900 buffer_time=2.210 print_stall=0 extruder: target=240 temp=240.0 pwm=0.506
Stats 797196.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1960296 bytes_read=602125 bytes_retransmit=9 bytes_invalid=0 send_seq=39983 receive_seq=39983 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992970 heater_bed: target=80 temp=79.9 pwm=0.448 sd_pos=290024 sysload=0.12 cputime=89.410 memavail=7289292 print_time=2422.459 buffer_time=2.766 print_stall=0 extruder: target=240 temp=240.2 pwm=0.424
Stats 797197.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1961237 bytes_read=602548 bytes_retransmit=9 bytes_invalid=0 send_seq=40009 receive_seq=40009 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992972 heater_bed: target=80 temp=79.9 pwm=0.506 sd_pos=290175 sysload=0.12 cputime=89.474 memavail=7289292 print_time=2422.988 buffer_time=2.291 print_stall=0 extruder: target=240 temp=240.5 pwm=0.265
Stats 797198.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1963221 bytes_read=603055 bytes_retransmit=9 bytes_invalid=0 send_seq=40052 receive_seq=40052 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992965 heater_bed: target=80 temp=80.0 pwm=0.396 sd_pos=290417 sysload=0.12 cputime=89.543 memavail=7289292 print_time=2424.134 buffer_time=2.431 print_stall=0 extruder: target=240 temp=239.8 pwm=0.588
Stats 797199.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1964196 bytes_read=603463 bytes_retransmit=9 bytes_invalid=0 send_seq=40078 receive_seq=40078 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992963 heater_bed: target=80 temp=80.0 pwm=0.400 sd_pos=290476 sysload=0.11 cputime=89.599 memavail=7289292 print_time=2425.043 buffer_time=2.339 print_stall=0 extruder: target=240 temp=239.4 pwm=0.700
Stats 797200.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=1964942 bytes_read=603881 bytes_retransmit=9 bytes_invalid=0 send_seq=40100 receive_seq=40100 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992959 heater_bed: target=80 temp=80.0 pwm=0.481 sd_pos=290561 sysload=0.11 cputime=89.651 memavail=7289292 print_time=2425.937 buffer_time=2.233 print_stall=0 extruder: target=240 temp=239.5 pwm=0.625
Stats 797201.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=1968194 bytes_read=604493 bytes_retransmit=9 bytes_invalid=0 send_seq=40164 receive_seq=40164 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992954 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=291023 sysload=0.11 cputime=89.719 memavail=7289292 print_time=2427.284 buffer_time=2.580 print_stall=0 extruder: target=240 temp=239.9 pwm=0.485
Stats 797202.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=1969747 bytes_read=604941 bytes_retransmit=9 bytes_invalid=0 send_seq=40198 receive_seq=40198 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992948 heater_bed: target=80 temp=80.0 pwm=0.595 sd_pos=291327 sysload=0.11 cputime=89.783 memavail=7289292 print_time=2428.003 buffer_time=2.297 print_stall=0 extruder: target=240 temp=240.5 pwm=0.197
Stats 797203.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=1971739 bytes_read=605449 bytes_retransmit=9 bytes_invalid=0 send_seq=40241 receive_seq=40241 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992938 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=291911 sysload=0.11 cputime=89.851 memavail=7289072 print_time=2428.848 buffer_time=2.142 print_stall=0 extruder: target=240 temp=239.8 pwm=0.631
Stats 797204.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=1973806 bytes_read=605971 bytes_retransmit=9 bytes_invalid=0 send_seq=40287 receive_seq=40287 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992934 heater_bed: target=80 temp=80.1 pwm=0.358 sd_pos=292251 sysload=0.10 cputime=89.913 memavail=7289072 print_time=2430.135 buffer_time=2.428 print_stall=0 extruder: target=240 temp=240.1 pwm=0.397
Stats 797205.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1976713 bytes_read=606560 bytes_retransmit=9 bytes_invalid=0 send_seq=40346 receive_seq=40346 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992958 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=292802 sysload=0.10 cputime=89.985 memavail=7289072 print_time=2431.048 buffer_time=2.340 print_stall=0 extruder: target=240 temp=240.4 pwm=0.310
Stats 797206.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1980212 bytes_read=607193 bytes_retransmit=9 bytes_invalid=0 send_seq=40414 receive_seq=40414 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992951 heater_bed: target=80 temp=80.0 pwm=0.616 sd_pos=293356 sysload=0.10 cputime=90.044 memavail=7288820 print_time=2431.708 buffer_time=1.999 print_stall=0 extruder: target=240 temp=240.3 pwm=0.384
Stats 797207.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1985048 bytes_read=607915 bytes_retransmit=9 bytes_invalid=0 send_seq=40500 receive_seq=40500 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=961 freq=119992946 heater_bed: target=80 temp=80.0 pwm=0.548 sd_pos=294388 sysload=0.10 cputime=90.129 memavail=7288820 print_time=2432.947 buffer_time=2.237 print_stall=0 extruder: target=240 temp=239.5 pwm=0.743
Stats 797208.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1989919 bytes_read=608603 bytes_retransmit=9 bytes_invalid=0 send_seq=40582 receive_seq=40582 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=2374 freq=119992945 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=295473 sysload=0.10 cputime=90.254 memavail=7288532 print_time=2434.260 buffer_time=2.549 print_stall=0 extruder: target=240 temp=239.9 pwm=0.474
Stats 797209.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1994600 bytes_read=609301 bytes_retransmit=9 bytes_invalid=0 send_seq=40663 receive_seq=40663 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1423 freq=119992936 heater_bed: target=80 temp=80.0 pwm=0.508 sd_pos=295912 sysload=0.09 cputime=90.317 memavail=7288532 print_time=2435.067 buffer_time=2.356 print_stall=0 extruder: target=240 temp=239.7 pwm=0.554
Stats 797210.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1999394 bytes_read=610013 bytes_retransmit=9 bytes_invalid=0 send_seq=40745 receive_seq=40745 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=271 freq=119992992 heater_bed: target=80 temp=80.0 pwm=0.591 sd_pos=296456 sysload=0.09 cputime=90.387 memavail=7288532 print_time=2435.725 buffer_time=2.013 print_stall=0 extruder: target=240 temp=239.8 pwm=0.551
Stats 797211.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2004037 bytes_read=610684 bytes_retransmit=9 bytes_invalid=0 send_seq=40825 receive_seq=40825 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2085 freq=119992986 heater_bed: target=80 temp=80.0 pwm=0.530 sd_pos=297325 sysload=0.09 cputime=90.471 memavail=7288536 print_time=2437.132 buffer_time=2.419 print_stall=0 extruder: target=240 temp=240.4 pwm=0.304
Stats 797212.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2009023 bytes_read=611418 bytes_retransmit=9 bytes_invalid=0 send_seq=40912 receive_seq=40912 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=709 freq=119992965 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=297643 sysload=0.09 cputime=90.548 memavail=7288536 print_time=2437.962 buffer_time=2.249 print_stall=0 extruder: target=240 temp=240.2 pwm=0.461
Stats 797213.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2013885 bytes_read=612125 bytes_retransmit=9 bytes_invalid=0 send_seq=40995 receive_seq=40995 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=2004 freq=119992999 heater_bed: target=80 temp=80.0 pwm=0.590 sd_pos=298445 sysload=0.09 cputime=90.637 memavail=7288536 print_time=2439.238 buffer_time=2.525 print_stall=0 extruder: target=240 temp=240.0 pwm=0.543
Stats 797214.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2018115 bytes_read=612773 bytes_retransmit=9 bytes_invalid=0 send_seq=41069 receive_seq=41069 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=1417 freq=119992989 heater_bed: target=80 temp=80.0 pwm=0.536 sd_pos=298873 sysload=0.08 cputime=90.726 memavail=7288312 print_time=2440.006 buffer_time=2.292 print_stall=0 extruder: target=240 temp=239.8 pwm=0.543
Stats 797215.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2023077 bytes_read=613496 bytes_retransmit=9 bytes_invalid=0 send_seq=41155 receive_seq=41155 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=2912 freq=119992980 heater_bed: target=80 temp=79.9 pwm=0.600 sd_pos=300116 sysload=0.08 cputime=90.835 memavail=7288312 print_time=2441.255 buffer_time=2.541 print_stall=0 extruder: target=240 temp=239.9 pwm=0.510
Stats 797216.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2027767 bytes_read=614204 bytes_retransmit=9 bytes_invalid=0 send_seq=41235 receive_seq=41235 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=1564 freq=119992975 heater_bed: target=80 temp=80.0 pwm=0.331 sd_pos=300592 sysload=0.08 cputime=90.925 memavail=7287808 print_time=2441.842 buffer_time=2.126 print_stall=0 extruder: target=240 temp=240.3 pwm=0.302
Stats 797217.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2033079 bytes_read=614937 bytes_retransmit=9 bytes_invalid=0 send_seq=41326 receive_seq=41326 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=709 freq=119992970 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=301529 sysload=0.08 cputime=91.031 memavail=7287808 print_time=2442.965 buffer_time=2.249 print_stall=0 extruder: target=240 temp=240.1 pwm=0.469
Stats 797218.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2035922 bytes_read=615500 bytes_retransmit=9 bytes_invalid=0 send_seq=41380 receive_seq=41380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992963 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=301615 sysload=0.08 cputime=91.097 memavail=7287808 print_time=2444.006 buffer_time=2.290 print_stall=0 extruder: target=240 temp=240.5 pwm=0.295
Stats 797219.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2037203 bytes_read=615942 bytes_retransmit=9 bytes_invalid=0 send_seq=41410 receive_seq=41410 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992958 heater_bed: target=80 temp=80.0 pwm=0.553 sd_pos=301786 sysload=0.08 cputime=91.149 memavail=7287808 print_time=2444.748 buffer_time=2.031 print_stall=0 extruder: target=240 temp=240.0 pwm=0.489
Stats 797220.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2038988 bytes_read=616410 bytes_retransmit=9 bytes_invalid=0 send_seq=41448 receive_seq=41448 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992952 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=301873 sysload=0.08 cputime=91.206 memavail=7287808 print_time=2446.277 buffer_time=2.560 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 797221.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2041853 bytes_read=616944 bytes_retransmit=9 bytes_invalid=0 send_seq=41505 receive_seq=41493 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=1608 upcoming_bytes=0 freq=119992947 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=302702 sysload=0.08 cputime=91.283 memavail=7287584 print_time=2447.679 buffer_time=2.960 print_stall=0 extruder: target=240 temp=240.2 pwm=0.422
Stats 797222.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2046978 bytes_read=617786 bytes_retransmit=9 bytes_invalid=0 send_seq=41603 receive_seq=41603 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992982 heater_bed: target=80 temp=80.0 pwm=0.582 sd_pos=303250 sysload=0.08 cputime=91.354 memavail=7287584 print_time=2448.299 buffer_time=2.579 print_stall=0 extruder: target=240 temp=240.3 pwm=0.416
Stats 797223.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2049268 bytes_read=618299 bytes_retransmit=9 bytes_invalid=0 send_seq=41650 receive_seq=41650 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=1002 freq=119992974 heater_bed: target=80 temp=79.9 pwm=0.585 sd_pos=303793 sysload=0.08 cputime=91.414 memavail=7287584 print_time=2448.943 buffer_time=2.222 print_stall=0 extruder: target=240 temp=240.5 pwm=0.305
Stats 797224.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2053733 bytes_read=618977 bytes_retransmit=9 bytes_invalid=0 send_seq=41727 receive_seq=41727 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=26 upcoming_bytes=2596 freq=119992970 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=304667 sysload=0.23 cputime=91.529 memavail=7287108 print_time=2450.371 buffer_time=2.649 print_stall=0 extruder: target=240 temp=239.8 pwm=0.591
Stats 797225.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2058930 bytes_read=619724 bytes_retransmit=9 bytes_invalid=0 send_seq=41818 receive_seq=41818 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=1912 freq=119992962 heater_bed: target=80 temp=80.0 pwm=0.541 sd_pos=305466 sysload=0.23 cputime=91.620 memavail=7287564 print_time=2451.278 buffer_time=2.556 print_stall=0 extruder: target=240 temp=239.6 pwm=0.605
Stats 797226.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2063552 bytes_read=620418 bytes_retransmit=9 bytes_invalid=0 send_seq=41898 receive_seq=41898 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=540 freq=119992958 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=305864 sysload=0.23 cputime=91.689 memavail=7288324 print_time=2451.821 buffer_time=2.098 print_stall=0 extruder: target=240 temp=240.3 pwm=0.260
Stats 797227.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2067432 bytes_read=621051 bytes_retransmit=9 bytes_invalid=0 send_seq=41966 receive_seq=41966 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993021 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=306113 sysload=0.23 cputime=91.771 memavail=7288324 print_time=2453.260 buffer_time=2.537 print_stall=0 extruder: target=240 temp=240.1 pwm=0.372
Stats 797228.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2068185 bytes_read=621458 bytes_retransmit=9 bytes_invalid=0 send_seq=41989 receive_seq=41989 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119993005 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=306143 sysload=0.23 cputime=91.820 memavail=7288324 print_time=2453.727 buffer_time=2.003 print_stall=0 extruder: target=240 temp=240.4 pwm=0.284
Stats 797229.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2069657 bytes_read=621916 bytes_retransmit=9 bytes_invalid=0 send_seq=42025 receive_seq=42025 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992992 heater_bed: target=80 temp=80.1 pwm=0.446 sd_pos=306334 sysload=0.21 cputime=91.878 memavail=7288324 print_time=2454.819 buffer_time=2.095 print_stall=0 extruder: target=240 temp=240.5 pwm=0.293
Stats 797230.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2072229 bytes_read=622464 bytes_retransmit=9 bytes_invalid=0 send_seq=42076 receive_seq=42076 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992989 heater_bed: target=80 temp=80.1 pwm=0.514 sd_pos=306727 sysload=0.21 cputime=91.956 memavail=7288324 print_time=2456.480 buffer_time=2.755 print_stall=0 extruder: target=240 temp=239.8 pwm=0.628
Stats 797231.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2072954 bytes_read=622882 bytes_retransmit=9 bytes_invalid=0 send_seq=42098 receive_seq=42098 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119993047 heater_bed: target=80 temp=80.1 pwm=0.514 sd_pos=306727 sysload=0.21 cputime=92.015 memavail=7288324 print_time=2456.802 buffer_time=2.077 print_stall=0 extruder: target=240 temp=239.9 pwm=0.436
Stats 797232.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2073906 bytes_read=623285 bytes_retransmit=9 bytes_invalid=0 send_seq=42123 receive_seq=42123 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993031 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=306871 sysload=0.21 cputime=92.071 memavail=7288324 print_time=2458.283 buffer_time=2.556 print_stall=0 extruder: target=240 temp=240.1 pwm=0.368
Stats 797233.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2076897 bytes_read=623873 bytes_retransmit=9 bytes_invalid=0 send_seq=42182 receive_seq=42182 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119993023 heater_bed: target=80 temp=80.1 pwm=0.388 sd_pos=307301 sysload=0.21 cputime=92.144 memavail=7288324 print_time=2459.595 buffer_time=2.868 print_stall=0 extruder: target=240 temp=239.8 pwm=0.553
Stats 797234.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2077850 bytes_read=624295 bytes_retransmit=9 bytes_invalid=0 send_seq=42208 receive_seq=42208 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993010 heater_bed: target=80 temp=80.1 pwm=0.467 sd_pos=307384 sysload=0.20 cputime=92.200 memavail=7288324 print_time=2459.909 buffer_time=2.181 print_stall=0 extruder: target=240 temp=239.8 pwm=0.539
Stats 797235.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2079524 bytes_read=624753 bytes_retransmit=9 bytes_invalid=0 send_seq=42244 receive_seq=42244 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993030 heater_bed: target=80 temp=80.1 pwm=0.467 sd_pos=307829 sysload=0.20 cputime=92.266 memavail=7288324 print_time=2460.732 buffer_time=2.004 print_stall=0 extruder: target=240 temp=239.8 pwm=0.482
Stats 797236.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2081796 bytes_read=625296 bytes_retransmit=9 bytes_invalid=0 send_seq=42291 receive_seq=42291 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993019 heater_bed: target=80 temp=80.1 pwm=0.494 sd_pos=308383 sysload=0.20 cputime=92.331 memavail=7288332 print_time=2461.932 buffer_time=2.202 print_stall=0 extruder: target=240 temp=239.8 pwm=0.539
Stats 797237.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2084032 bytes_read=625823 bytes_retransmit=9 bytes_invalid=0 send_seq=42338 receive_seq=42338 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993006 heater_bed: target=80 temp=80.1 pwm=0.550 sd_pos=308783 sysload=0.20 cputime=92.392 memavail=7288108 print_time=2462.971 buffer_time=2.241 print_stall=0 extruder: target=240 temp=239.9 pwm=0.478
Stats 797238.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2088099 bytes_read=626481 bytes_retransmit=9 bytes_invalid=0 send_seq=42414 receive_seq=42414 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992997 heater_bed: target=80 temp=80.1 pwm=0.426 sd_pos=309467 sysload=0.20 cputime=92.463 memavail=7287884 print_time=2463.883 buffer_time=2.152 print_stall=0 extruder: target=240 temp=240.1 pwm=0.395
Stats 797239.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2092604 bytes_read=627189 bytes_retransmit=9 bytes_invalid=0 send_seq=42497 receive_seq=42497 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=2435 freq=119992987 heater_bed: target=80 temp=80.1 pwm=0.545 sd_pos=310662 sysload=0.18 cputime=92.549 memavail=7287884 print_time=2465.264 buffer_time=2.532 print_stall=0 extruder: target=240 temp=239.8 pwm=0.523
Stats 797240.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2096937 bytes_read=627856 bytes_retransmit=9 bytes_invalid=0 send_seq=42572 receive_seq=42572 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1739 freq=119992983 heater_bed: target=80 temp=80.1 pwm=0.502 sd_pos=311355 sysload=0.18 cputime=92.644 memavail=7290132 print_time=2465.929 buffer_time=2.196 print_stall=0 extruder: target=240 temp=240.1 pwm=0.516
Stats 797241.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2102220 bytes_read=628610 bytes_retransmit=9 bytes_invalid=0 send_seq=42664 receive_seq=42664 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=2310 freq=119992971 heater_bed: target=80 temp=80.0 pwm=0.534 sd_pos=312629 sysload=0.18 cputime=92.755 memavail=7292804 print_time=2467.078 buffer_time=2.345 print_stall=0 extruder: target=240 temp=240.0 pwm=0.486
Stats 797242.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2107581 bytes_read=629363 bytes_retransmit=9 bytes_invalid=0 send_seq=42756 receive_seq=42756 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=2689 freq=119992965 heater_bed: target=80 temp=80.0 pwm=0.534 sd_pos=313905 sysload=0.18 cputime=92.874 memavail=7292804 print_time=2468.264 buffer_time=2.530 print_stall=0 extruder: target=240 temp=239.8 pwm=0.486
Stats 797243.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2112756 bytes_read=630100 bytes_retransmit=9 bytes_invalid=0 send_seq=42845 receive_seq=42845 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=1156 freq=119992955 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=314648 sysload=0.18 cputime=92.988 memavail=7292804 print_time=2468.932 buffer_time=2.197 print_stall=0 extruder: target=240 temp=240.3 pwm=0.355
Stats 797244.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2117415 bytes_read=630778 bytes_retransmit=9 bytes_invalid=0 send_seq=42925 receive_seq=42925 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=2753 freq=119992995 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=315938 sysload=0.16 cputime=93.108 memavail=7292552 print_time=2470.184 buffer_time=2.448 print_stall=0 extruder: target=240 temp=239.8 pwm=0.556
Stats 797245.2: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2122631 bytes_read=631537 bytes_retransmit=9 bytes_invalid=0 send_seq=43015 receive_seq=43015 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1426 freq=119992990 heater_bed: target=80 temp=80.0 pwm=0.607 sd_pos=316595 sysload=0.16 cputime=93.206 memavail=7292552 print_time=2470.865 buffer_time=2.129 print_stall=0 extruder: target=240 temp=240.0 pwm=0.485
Stats 797246.2: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2127772 bytes_read=632266 bytes_retransmit=9 bytes_invalid=0 send_seq=43104 receive_seq=43104 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=2295 freq=119992975 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=317664 sysload=0.16 cputime=93.330 memavail=7292552 print_time=2472.170 buffer_time=2.433 print_stall=0 extruder: target=240 temp=240.0 pwm=0.439
Stats 797247.2: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2133053 bytes_read=632992 bytes_retransmit=9 bytes_invalid=0 send_seq=43195 receive_seq=43195 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=433 freq=119992964 heater_bed: target=80 temp=80.0 pwm=0.603 sd_pos=318325 sysload=0.16 cputime=93.435 memavail=7292552 print_time=2472.749 buffer_time=2.011 print_stall=0 extruder: target=240 temp=240.0 pwm=0.439
Stats 797248.2: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2137804 bytes_read=633692 bytes_retransmit=9 bytes_invalid=0 send_seq=43277 receive_seq=43277 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=208 freq=119992955 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=319258 sysload=0.16 cputime=93.549 memavail=7292556 print_time=2474.215 buffer_time=2.476 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 797249.2: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2138949 bytes_read=634119 bytes_retransmit=9 bytes_invalid=0 send_seq=43304 receive_seq=43304 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992957 heater_bed: target=80 temp=80.0 pwm=0.506 sd_pos=319317 sysload=0.15 cputime=93.611 memavail=7292556 print_time=2474.988 buffer_time=2.249 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 797250.2: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2140755 bytes_read=634577 bytes_retransmit=9 bytes_invalid=0 send_seq=43340 receive_seq=43340 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992958 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=319487 sysload=0.15 cputime=93.671 memavail=7292556 print_time=2475.904 buffer_time=2.164 print_stall=0 extruder: target=240 temp=240.1 pwm=0.485
Stats 797251.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2141983 bytes_read=635026 bytes_retransmit=9 bytes_invalid=0 send_seq=43368 receive_seq=43368 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992954 heater_bed: target=80 temp=80.0 pwm=0.523 sd_pos=319516 sysload=0.15 cputime=93.727 memavail=7292556 print_time=2476.803 buffer_time=2.062 print_stall=0 extruder: target=240 temp=240.2 pwm=0.417
Stats 797252.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2147163 bytes_read=635793 bytes_retransmit=9 bytes_invalid=0 send_seq=43463 receive_seq=43463 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992950 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=320447 sysload=0.15 cputime=93.803 memavail=7292556 print_time=2478.304 buffer_time=2.562 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 797253.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2151112 bytes_read=636446 bytes_retransmit=9 bytes_invalid=0 send_seq=43538 receive_seq=43538 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=81 freq=119993001 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=321079 sysload=0.15 cputime=93.873 memavail=7292556 print_time=2479.119 buffer_time=2.376 print_stall=0 extruder: target=240 temp=239.8 pwm=0.597
Stats 797254.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2153548 bytes_read=636969 bytes_retransmit=9 bytes_invalid=0 send_seq=43584 receive_seq=43584 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=1337 freq=119992997 heater_bed: target=80 temp=80.0 pwm=0.511 sd_pos=321878 sysload=0.14 cputime=93.959 memavail=7292556 print_time=2479.743 buffer_time=1.999 print_stall=0 extruder: target=240 temp=239.9 pwm=0.468
Stats 797255.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2158566 bytes_read=637691 bytes_retransmit=9 bytes_invalid=0 send_seq=43670 receive_seq=43670 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=3395 freq=119992989 heater_bed: target=80 temp=80.0 pwm=0.511 sd_pos=323201 sysload=0.14 cputime=94.068 memavail=7292276 print_time=2481.116 buffer_time=2.371 print_stall=0 extruder: target=240 temp=240.0 pwm=0.427
Stats 797256.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2164571 bytes_read=638495 bytes_retransmit=9 bytes_invalid=0 send_seq=43772 receive_seq=43772 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=1863 freq=119992977 heater_bed: target=80 temp=80.0 pwm=0.585 sd_pos=323980 sysload=0.14 cputime=94.178 memavail=7292024 print_time=2482.039 buffer_time=2.294 print_stall=0 extruder: target=240 temp=239.7 pwm=0.542
Stats 797257.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2168917 bytes_read=639163 bytes_retransmit=9 bytes_invalid=0 send_seq=43847 receive_seq=43847 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992966 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=324184 sysload=0.14 cputime=94.265 memavail=7291772 print_time=2482.759 buffer_time=2.013 print_stall=0 extruder: target=240 temp=239.9 pwm=0.464
Stats 797258.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2170227 bytes_read=639610 bytes_retransmit=9 bytes_invalid=0 send_seq=43878 receive_seq=43878 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992963 heater_bed: target=80 temp=80.0 pwm=0.508 sd_pos=324244 sysload=0.14 cputime=94.321 memavail=7291772 print_time=2483.895 buffer_time=2.149 print_stall=0 extruder: target=240 temp=240.0 pwm=0.441
Stats 797259.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2171711 bytes_read=640053 bytes_retransmit=9 bytes_invalid=0 send_seq=43911 receive_seq=43911 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992953 heater_bed: target=80 temp=80.1 pwm=0.324 sd_pos=324435 sysload=0.13 cputime=94.370 memavail=7291772 print_time=2484.987 buffer_time=2.240 print_stall=0 extruder: target=240 temp=240.1 pwm=0.396
Stats 797260.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2173781 bytes_read=640561 bytes_retransmit=9 bytes_invalid=0 send_seq=43954 receive_seq=43954 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992945 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=324769 sysload=0.13 cputime=94.427 memavail=7291772 print_time=2485.795 buffer_time=2.047 print_stall=0 extruder: target=240 temp=240.1 pwm=0.450
Stats 797261.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2175066 bytes_read=641019 bytes_retransmit=9 bytes_invalid=0 send_seq=43984 receive_seq=43984 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992962 heater_bed: target=80 temp=80.0 pwm=0.490 sd_pos=324828 sysload=0.13 cputime=94.487 memavail=7291772 print_time=2486.842 buffer_time=2.094 print_stall=0 extruder: target=240 temp=240.4 pwm=0.335
Stats 797262.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2175996 bytes_read=641412 bytes_retransmit=9 bytes_invalid=0 send_seq=44007 receive_seq=44007 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119993012 heater_bed: target=80 temp=80.0 pwm=0.604 sd_pos=324972 sysload=0.13 cputime=94.543 memavail=7291772 print_time=2488.466 buffer_time=2.716 print_stall=0 extruder: target=240 temp=240.0 pwm=0.547
Stats 797263.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2179221 bytes_read=642015 bytes_retransmit=9 bytes_invalid=0 send_seq=44069 receive_seq=44069 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119993001 heater_bed: target=80 temp=80.1 pwm=0.495 sd_pos=325434 sysload=0.13 cputime=94.610 memavail=7291772 print_time=2489.813 buffer_time=3.063 print_stall=0 extruder: target=240 temp=240.1 pwm=0.469
Stats 797264.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2179502 bytes_read=642392 bytes_retransmit=9 bytes_invalid=0 send_seq=44086 receive_seq=44086 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992989 heater_bed: target=80 temp=80.1 pwm=0.435 sd_pos=325434 sysload=0.12 cputime=94.655 memavail=7291772 print_time=2489.813 buffer_time=2.062 print_stall=0 extruder: target=240 temp=240.0 pwm=0.429
Stats 797265.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2181851 bytes_read=642900 bytes_retransmit=9 bytes_invalid=0 send_seq=44132 receive_seq=44132 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992983 heater_bed: target=80 temp=80.1 pwm=0.482 sd_pos=325964 sysload=0.12 cputime=94.726 memavail=7291772 print_time=2490.950 buffer_time=2.199 print_stall=0 extruder: target=240 temp=240.0 pwm=0.512
Stats 797266.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2184133 bytes_read=643433 bytes_retransmit=9 bytes_invalid=0 send_seq=44177 receive_seq=44177 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992975 heater_bed: target=80 temp=80.0 pwm=0.630 sd_pos=326515 sysload=0.12 cputime=94.800 memavail=7291772 print_time=2492.150 buffer_time=2.398 print_stall=0 extruder: target=240 temp=239.7 pwm=0.561
Stats 797267.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2186356 bytes_read=643965 bytes_retransmit=9 bytes_invalid=0 send_seq=44225 receive_seq=44225 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992964 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=326917 sysload=0.12 cputime=94.864 memavail=7291772 print_time=2493.189 buffer_time=2.437 print_stall=0 extruder: target=240 temp=240.0 pwm=0.432
Stats 797268.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2190432 bytes_read=644633 bytes_retransmit=9 bytes_invalid=0 send_seq=44303 receive_seq=44303 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992955 heater_bed: target=80 temp=80.0 pwm=0.499 sd_pos=327578 sysload=0.12 cputime=94.929 memavail=7291772 print_time=2494.089 buffer_time=2.336 print_stall=0 extruder: target=240 temp=239.8 pwm=0.613
Stats 797269.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2194910 bytes_read=645341 bytes_retransmit=9 bytes_invalid=0 send_seq=44386 receive_seq=44386 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=2268 freq=119992947 heater_bed: target=80 temp=80.0 pwm=0.552 sd_pos=329031 sysload=0.11 cputime=95.011 memavail=7291772 print_time=2495.311 buffer_time=2.558 print_stall=0 extruder: target=240 temp=240.0 pwm=0.489
Stats 797270.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2198149 bytes_read=645928 bytes_retransmit=9 bytes_invalid=0 send_seq=44445 receive_seq=44445 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2435 freq=119992939 heater_bed: target=80 temp=80.1 pwm=0.456 sd_pos=329797 sysload=0.11 cputime=95.097 memavail=7291772 print_time=2495.911 buffer_time=2.158 print_stall=0 extruder: target=240 temp=240.0 pwm=0.452
Stats 797271.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=2203826 bytes_read=646707 bytes_retransmit=9 bytes_invalid=0 send_seq=44542 receive_seq=44542 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=3268 freq=119992973 heater_bed: target=80 temp=80.1 pwm=0.456 sd_pos=331374 sysload=0.11 cputime=95.214 memavail=7291772 print_time=2497.132 buffer_time=2.378 print_stall=0 extruder: target=240 temp=239.8 pwm=0.554
Stats 797272.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=2209569 bytes_read=647485 bytes_retransmit=9 bytes_invalid=0 send_seq=44639 receive_seq=44639 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=3416 freq=119992967 heater_bed: target=80 temp=80.0 pwm=0.620 sd_pos=332897 sysload=0.11 cputime=95.335 memavail=7291772 print_time=2498.314 buffer_time=2.559 print_stall=0 extruder: target=240 temp=240.3 pwm=0.333
Stats 797273.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=2215167 bytes_read=648268 bytes_retransmit=9 bytes_invalid=0 send_seq=44735 receive_seq=44735 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=1022 freq=119992945 heater_bed: target=80 temp=80.0 pwm=0.620 sd_pos=333695 sysload=0.11 cputime=95.434 memavail=7291772 print_time=2498.887 buffer_time=2.131 print_stall=0 extruder: target=240 temp=239.5 pwm=0.745
Stats 797274.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=2220326 bytes_read=648991 bytes_retransmit=9 bytes_invalid=0 send_seq=44824 receive_seq=44824 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=2652 freq=119992941 heater_bed: target=80 temp=80.0 pwm=0.630 sd_pos=335169 sysload=0.10 cputime=95.549 memavail=7291772 print_time=2500.181 buffer_time=2.426 print_stall=0 extruder: target=240 temp=239.4 pwm=0.750
Stats 797275.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=2225235 bytes_read=649709 bytes_retransmit=9 bytes_invalid=0 send_seq=44909 receive_seq=44909 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=1159 freq=119992938 heater_bed: target=80 temp=80.0 pwm=0.640 sd_pos=335834 sysload=0.10 cputime=95.662 memavail=7291772 print_time=2500.778 buffer_time=2.021 print_stall=0 extruder: target=240 temp=239.6 pwm=0.642
Stats 797276.2: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2230564 bytes_read=650467 bytes_retransmit=9 bytes_invalid=0 send_seq=44999 receive_seq=44999 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=3225 freq=119992932 heater_bed: target=80 temp=80.0 pwm=0.338 sd_pos=337123 sysload=0.10 cputime=95.785 memavail=7291520 print_time=2502.287 buffer_time=2.529 print_stall=0 extruder: target=240 temp=240.0 pwm=0.447
Stats 797277.2: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2235890 bytes_read=651195 bytes_retransmit=9 bytes_invalid=0 send_seq=45089 receive_seq=45089 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=1494 freq=119992932 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=337921 sysload=0.10 cputime=95.879 memavail=7291520 print_time=2502.881 buffer_time=2.122 print_stall=0 extruder: target=240 temp=240.0 pwm=0.494
Stats 797278.2: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2241632 bytes_read=651987 bytes_retransmit=9 bytes_invalid=0 send_seq=45186 receive_seq=45186 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=1134 freq=119992927 heater_bed: target=80 temp=80.0 pwm=0.607 sd_pos=339161 sysload=0.10 cputime=96.000 memavail=7291520 print_time=2504.053 buffer_time=2.294 print_stall=0 extruder: target=240 temp=240.5 pwm=0.310
Stats 797279.2: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2244306 bytes_read=652520 bytes_retransmit=9 bytes_invalid=0 send_seq=45237 receive_seq=45237 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=80.0 pwm=0.331 sd_pos=339248 sysload=0.17 cputime=96.078 memavail=7291520 print_time=2504.905 buffer_time=2.145 print_stall=0 extruder: target=240 temp=240.1 pwm=0.450
Stats 797280.2: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2246110 bytes_read=652998 bytes_retransmit=9 bytes_invalid=0 send_seq=45277 receive_seq=45277 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992916 heater_bed: target=80 temp=80.0 pwm=0.604 sd_pos=339419 sysload=0.17 cputime=96.141 memavail=7291520 print_time=2505.807 buffer_time=2.047 print_stall=0 extruder: target=240 temp=239.8 pwm=0.522
Stats 797281.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2247485 bytes_read=653474 bytes_retransmit=9 bytes_invalid=0 send_seq=45308 receive_seq=45308 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992912 heater_bed: target=80 temp=80.0 pwm=0.573 sd_pos=339506 sysload=0.17 cputime=96.202 memavail=7291520 print_time=2507.177 buffer_time=2.416 print_stall=0 extruder: target=240 temp=239.5 pwm=0.707
Stats 797282.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2252487 bytes_read=654205 bytes_retransmit=9 bytes_invalid=0 send_seq=45400 receive_seq=45400 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992945 heater_bed: target=80 temp=80.0 pwm=0.574 sd_pos=340378 sysload=0.17 cputime=96.278 memavail=7291520 print_time=2508.635 buffer_time=2.874 print_stall=0 extruder: target=240 temp=239.6 pwm=0.621
Stats 797283.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2256526 bytes_read=654851 bytes_retransmit=9 bytes_invalid=0 send_seq=45475 receive_seq=45475 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992938 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=340923 sysload=0.17 cputime=96.337 memavail=7291520 print_time=2509.443 buffer_time=2.681 print_stall=0 extruder: target=240 temp=239.8 pwm=0.450
Stats 797284.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2257716 bytes_read=655302 bytes_retransmit=9 bytes_invalid=0 send_seq=45504 receive_seq=45504 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=2759 freq=119992937 heater_bed: target=80 temp=80.0 pwm=0.576 sd_pos=341780 sysload=0.16 cputime=96.422 memavail=7291520 print_time=2510.131 buffer_time=2.368 print_stall=0 extruder: target=240 temp=240.4 pwm=0.282
Stats 797285.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2262774 bytes_read=656020 bytes_retransmit=9 bytes_invalid=0 send_seq=45592 receive_seq=45592 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1487 freq=119992925 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=342404 sysload=0.16 cputime=96.524 memavail=7290792 print_time=2510.774 buffer_time=2.011 print_stall=0 extruder: target=240 temp=240.0 pwm=0.534
Stats 797286.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2268295 bytes_read=656789 bytes_retransmit=9 bytes_invalid=0 send_seq=45687 receive_seq=45687 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2519 freq=119992914 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=343670 sysload=0.16 cputime=96.608 memavail=7291044 print_time=2512.061 buffer_time=2.297 print_stall=0 extruder: target=240 temp=240.4 pwm=0.363
Stats 797287.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2273894 bytes_read=657571 bytes_retransmit=9 bytes_invalid=0 send_seq=45782 receive_seq=45782 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=812 freq=119992909 heater_bed: target=80 temp=80.0 pwm=0.498 sd_pos=344073 sysload=0.16 cputime=96.686 memavail=7291044 print_time=2513.081 buffer_time=2.316 print_stall=0 extruder: target=240 temp=239.8 pwm=0.532
Stats 797288.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2276156 bytes_read=658074 bytes_retransmit=9 bytes_invalid=0 send_seq=45827 receive_seq=45827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992909 heater_bed: target=80 temp=80.0 pwm=0.566 sd_pos=344131 sysload=0.16 cputime=96.761 memavail=7291044 print_time=2513.915 buffer_time=2.150 print_stall=0 extruder: target=240 temp=239.6 pwm=0.629
Stats 797289.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2278153 bytes_read=658562 bytes_retransmit=9 bytes_invalid=0 send_seq=45869 receive_seq=45869 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992955 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=344352 sysload=0.31 cputime=96.829 memavail=7291304 print_time=2515.475 buffer_time=2.709 print_stall=0 extruder: target=240 temp=240.2 pwm=0.339
Stats 797290.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2279097 bytes_read=658999 bytes_retransmit=9 bytes_invalid=0 send_seq=45895 receive_seq=45895 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992942 heater_bed: target=80 temp=80.0 pwm=0.369 sd_pos=344503 sysload=0.31 cputime=96.873 memavail=7291304 print_time=2516.004 buffer_time=2.237 print_stall=0 extruder: target=240 temp=240.4 pwm=0.315
Stats 797291.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2281083 bytes_read=659503 bytes_retransmit=9 bytes_invalid=0 send_seq=45937 receive_seq=45937 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992942 heater_bed: target=80 temp=80.0 pwm=0.499 sd_pos=344745 sysload=0.31 cputime=96.933 memavail=7291304 print_time=2517.150 buffer_time=2.383 print_stall=0 extruder: target=240 temp=240.4 pwm=0.354
Stats 797292.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2282058 bytes_read=659911 bytes_retransmit=9 bytes_invalid=0 send_seq=45963 receive_seq=45963 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992937 heater_bed: target=80 temp=80.0 pwm=0.545 sd_pos=344804 sysload=0.31 cputime=96.998 memavail=7291304 print_time=2518.059 buffer_time=2.291 print_stall=0 extruder: target=240 temp=240.4 pwm=0.314
Stats 797293.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2282823 bytes_read=660333 bytes_retransmit=9 bytes_invalid=0 send_seq=45986 receive_seq=45986 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992935 heater_bed: target=80 temp=80.1 pwm=0.342 sd_pos=344889 sysload=0.31 cputime=97.053 memavail=7291304 print_time=2518.953 buffer_time=2.184 print_stall=0 extruder: target=240 temp=239.9 pwm=0.567
Stats 797294.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2286094 bytes_read=660936 bytes_retransmit=9 bytes_invalid=0 send_seq=46051 receive_seq=46051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992926 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=345349 sysload=0.28 cputime=97.125 memavail=7291304 print_time=2520.300 buffer_time=2.530 print_stall=0 extruder: target=240 temp=240.4 pwm=0.341
Stats 797295.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=2287687 bytes_read=661394 bytes_retransmit=9 bytes_invalid=0 send_seq=46087 receive_seq=46087 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992920 heater_bed: target=80 temp=80.0 pwm=0.563 sd_pos=345654 sysload=0.28 cputime=97.177 memavail=7291304 print_time=2521.013 buffer_time=2.243 print_stall=0 extruder: target=240 temp=240.2 pwm=0.409
Stats 797296.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2289709 bytes_read=661921 bytes_retransmit=9 bytes_invalid=0 send_seq=46128 receive_seq=46128 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992917 heater_bed: target=80 temp=80.1 pwm=0.473 sd_pos=346237 sysload=0.28 cputime=97.245 memavail=7291812 print_time=2521.858 buffer_time=2.088 print_stall=0 extruder: target=240 temp=240.3 pwm=0.342
Stats 797297.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2291937 bytes_read=662434 bytes_retransmit=9 bytes_invalid=0 send_seq=46175 receive_seq=46175 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.0 pwm=0.604 sd_pos=346602 sysload=0.28 cputime=97.308 memavail=7291524 print_time=2523.138 buffer_time=2.367 print_stall=0 extruder: target=240 temp=239.9 pwm=0.465
Stats 797298.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2297272 bytes_read=663197 bytes_retransmit=9 bytes_invalid=0 send_seq=46272 receive_seq=46272 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=80.1 pwm=0.510 sd_pos=347515 sysload=0.28 cputime=97.382 memavail=7291652 print_time=2524.598 buffer_time=2.826 print_stall=0 extruder: target=240 temp=240.0 pwm=0.362
Stats 797299.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2300781 bytes_read=663844 bytes_retransmit=9 bytes_invalid=0 send_seq=46340 receive_seq=46340 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=76 freq=119992900 heater_bed: target=80 temp=80.0 pwm=0.509 sd_pos=348251 sysload=0.26 cputime=97.443 memavail=7291652 print_time=2525.215 buffer_time=2.442 print_stall=0 extruder: target=240 temp=239.8 pwm=0.533
Stats 797300.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2303167 bytes_read=664362 bytes_retransmit=9 bytes_invalid=0 send_seq=46388 receive_seq=46388 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=4119 freq=119992892 heater_bed: target=80 temp=80.0 pwm=0.509 sd_pos=349670 sysload=0.26 cputime=97.533 memavail=7291652 print_time=2526.464 buffer_time=2.691 print_stall=0 extruder: target=240 temp=239.9 pwm=0.502
Stats 797301.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2308128 bytes_read=665086 bytes_retransmit=9 bytes_invalid=0 send_seq=46474 receive_seq=46474 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2698 freq=119992884 heater_bed: target=80 temp=80.0 pwm=0.500 sd_pos=350466 sysload=0.26 cputime=97.629 memavail=7291652 print_time=2527.091 buffer_time=2.317 print_stall=0 extruder: target=240 temp=240.1 pwm=0.451
Stats 797302.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2313760 bytes_read=665878 bytes_retransmit=9 bytes_invalid=0 send_seq=46571 receive_seq=46571 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=3293 freq=119992884 heater_bed: target=80 temp=80.1 pwm=0.445 sd_pos=351983 sysload=0.26 cputime=97.747 memavail=7291652 print_time=2528.312 buffer_time=2.537 print_stall=0 extruder: target=240 temp=240.0 pwm=0.493
Stats 797303.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2319091 bytes_read=666616 bytes_retransmit=9 bytes_invalid=0 send_seq=46663 receive_seq=46663 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1335 freq=119992877 heater_bed: target=80 temp=80.1 pwm=0.409 sd_pos=352720 sysload=0.26 cputime=97.847 memavail=7291652 print_time=2528.930 buffer_time=2.154 print_stall=0 extruder: target=240 temp=240.3 pwm=0.352
Stats 797304.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2324392 bytes_read=667339 bytes_retransmit=9 bytes_invalid=0 send_seq=46752 receive_seq=46752 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=2026 freq=119992875 heater_bed: target=80 temp=80.0 pwm=0.555 sd_pos=354245 sysload=0.24 cputime=97.956 memavail=7291652 print_time=2530.115 buffer_time=2.339 print_stall=0 extruder: target=240 temp=239.7 pwm=0.610
Stats 797305.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2329470 bytes_read=668076 bytes_retransmit=9 bytes_invalid=0 send_seq=46838 receive_seq=46838 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=903 freq=119992873 heater_bed: target=80 temp=80.0 pwm=0.544 sd_pos=354937 sysload=0.24 cputime=98.052 memavail=7291652 print_time=2530.813 buffer_time=2.036 print_stall=0 extruder: target=240 temp=239.5 pwm=0.697
Stats 797306.2: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2334557 bytes_read=668810 bytes_retransmit=9 bytes_invalid=0 send_seq=46926 receive_seq=46926 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=2670 freq=119992882 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=356267 sysload=0.24 cputime=98.169 memavail=7290900 print_time=2532.097 buffer_time=2.319 print_stall=0 extruder: target=240 temp=239.9 pwm=0.446
Stats 797307.2: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2339869 bytes_read=669558 bytes_retransmit=9 bytes_invalid=0 send_seq=47017 receive_seq=47017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=4612 freq=119992877 heater_bed: target=80 temp=80.0 pwm=0.569 sd_pos=357721 sysload=0.24 cputime=98.293 memavail=7290900 print_time=2533.516 buffer_time=2.737 print_stall=0 extruder: target=240 temp=240.0 pwm=0.491
Stats 797308.2: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2345304 bytes_read=670320 bytes_retransmit=9 bytes_invalid=0 send_seq=47111 receive_seq=47111 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=2543 freq=119992872 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=358481 sysload=0.24 cputime=98.402 memavail=7290900 print_time=2534.066 buffer_time=2.287 print_stall=0 extruder: target=240 temp=239.8 pwm=0.610
Stats 797309.2: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2350650 bytes_read=671058 bytes_retransmit=9 bytes_invalid=0 send_seq=47203 receive_seq=47203 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=880 freq=119992872 heater_bed: target=80 temp=80.0 pwm=0.518 sd_pos=359216 sysload=0.22 cputime=98.515 memavail=7290900 print_time=2534.907 buffer_time=2.126 print_stall=0 extruder: target=240 temp=240.0 pwm=0.537
Stats 797310.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2353139 bytes_read=671617 bytes_retransmit=9 bytes_invalid=0 send_seq=47253 receive_seq=47253 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992873 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=359362 sysload=0.22 cputime=98.598 memavail=7290900 print_time=2536.216 buffer_time=2.435 print_stall=0 extruder: target=240 temp=239.9 pwm=0.571
Stats 797311.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2354934 bytes_read=672099 bytes_retransmit=9 bytes_invalid=0 send_seq=47291 receive_seq=47291 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=80.0 pwm=0.519 sd_pos=359531 sysload=0.22 cputime=98.664 memavail=7290900 print_time=2537.133 buffer_time=2.351 print_stall=0 extruder: target=240 temp=239.9 pwm=0.505
Stats 797312.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2356290 bytes_read=672542 bytes_retransmit=9 bytes_invalid=0 send_seq=47324 receive_seq=47324 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=359560 sysload=0.22 cputime=98.727 memavail=7290900 print_time=2538.032 buffer_time=2.248 print_stall=0 extruder: target=240 temp=240.2 pwm=0.327
Stats 797313.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2361198 bytes_read=673285 bytes_retransmit=9 bytes_invalid=0 send_seq=47414 receive_seq=47414 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992875 heater_bed: target=80 temp=80.0 pwm=0.571 sd_pos=360303 sysload=0.22 cputime=98.807 memavail=7290900 print_time=2539.485 buffer_time=2.700 print_stall=0 extruder: target=240 temp=239.8 pwm=0.535
Stats 797314.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2365377 bytes_read=673972 bytes_retransmit=9 bytes_invalid=0 send_seq=47493 receive_seq=47493 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=206 freq=119992875 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=361023 sysload=0.20 cputime=98.890 memavail=7290572 print_time=2540.337 buffer_time=2.551 print_stall=0 extruder: target=240 temp=239.8 pwm=0.598
Stats 797315.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2367085 bytes_read=674425 bytes_retransmit=9 bytes_invalid=0 send_seq=47528 receive_seq=47528 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=2792 freq=119992875 heater_bed: target=80 temp=80.0 pwm=0.362 sd_pos=361802 sysload=0.20 cputime=98.985 memavail=7290652 print_time=2541.176 buffer_time=2.389 print_stall=0 extruder: target=240 temp=240.4 pwm=0.287
Stats 797316.2: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2372246 bytes_read=675174 bytes_retransmit=9 bytes_invalid=0 send_seq=47616 receive_seq=47616 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=1684 freq=119992874 heater_bed: target=80 temp=80.0 pwm=0.483 sd_pos=362400 sysload=0.20 cputime=99.106 memavail=7290652 print_time=2541.867 buffer_time=2.079 print_stall=0 extruder: target=240 temp=239.9 pwm=0.556
Stats 797317.2: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2377293 bytes_read=675892 bytes_retransmit=9 bytes_invalid=0 send_seq=47702 receive_seq=47702 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=3233 freq=119992876 heater_bed: target=80 temp=80.0 pwm=0.588 sd_pos=363578 sysload=0.20 cputime=99.215 memavail=7290652 print_time=2543.140 buffer_time=2.351 print_stall=0 extruder: target=240 temp=239.8 pwm=0.564
Stats 797318.2: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2383199 bytes_read=676668 bytes_retransmit=9 bytes_invalid=0 send_seq=47803 receive_seq=47803 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=1608 freq=119992874 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=364143 sysload=0.20 cputime=99.322 memavail=7290652 print_time=2544.019 buffer_time=2.230 print_stall=0 extruder: target=240 temp=239.8 pwm=0.507
Stats 797319.2: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2387728 bytes_read=677339 bytes_retransmit=9 bytes_invalid=0 send_seq=47880 receive_seq=47880 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=80.0 pwm=0.555 sd_pos=364421 sysload=0.18 cputime=99.422 memavail=7290652 print_time=2544.851 buffer_time=2.060 print_stall=0 extruder: target=240 temp=240.2 pwm=0.284
Stats 797320.2: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2389545 bytes_read=677836 bytes_retransmit=9 bytes_invalid=0 send_seq=47921 receive_seq=47921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992876 heater_bed: target=80 temp=80.0 pwm=0.342 sd_pos=364463 sysload=0.18 cputime=99.490 memavail=7290652 print_time=2545.894 buffer_time=2.103 print_stall=0 extruder: target=240 temp=240.4 pwm=0.243
Stats 797321.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2391087 bytes_read=678310 bytes_retransmit=9 bytes_invalid=0 send_seq=47957 receive_seq=47957 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992875 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=364696 sysload=0.18 cputime=99.562 memavail=7290652 print_time=2547.209 buffer_time=2.417 print_stall=0 extruder: target=240 temp=240.4 pwm=0.324
Stats 797322.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2393171 bytes_read=678823 bytes_retransmit=9 bytes_invalid=0 send_seq=48001 receive_seq=48001 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992880 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=365030 sysload=0.18 cputime=99.629 memavail=7290652 print_time=2548.017 buffer_time=2.223 print_stall=0 extruder: target=240 temp=240.0 pwm=0.456
Stats 797323.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2394027 bytes_read=679245 bytes_retransmit=9 bytes_invalid=0 send_seq=48027 receive_seq=48027 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992877 heater_bed: target=80 temp=80.1 pwm=0.364 sd_pos=365089 sysload=0.18 cputime=99.691 memavail=7290652 print_time=2548.884 buffer_time=2.090 print_stall=0 extruder: target=240 temp=240.3 pwm=0.365
Stats 797324.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2395502 bytes_read=679683 bytes_retransmit=9 bytes_invalid=0 send_seq=48062 receive_seq=48059 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992930 heater_bed: target=80 temp=80.1 pwm=0.450 sd_pos=365233 sysload=0.17 cputime=99.755 memavail=7290652 print_time=2550.687 buffer_time=2.890 print_stall=0 extruder: target=240 temp=240.3 pwm=0.315
Stats 797325.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2396503 bytes_read=680121 bytes_retransmit=9 bytes_invalid=0 send_seq=48088 receive_seq=48088 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992921 heater_bed: target=80 temp=80.1 pwm=0.444 sd_pos=365371 sysload=0.17 cputime=99.818 memavail=7290652 print_time=2550.917 buffer_time=2.119 print_stall=0 extruder: target=240 temp=239.8 pwm=0.612
Stats 797326.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2399035 bytes_read=680693 bytes_retransmit=9 bytes_invalid=0 send_seq=48141 receive_seq=48141 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992919 heater_bed: target=80 temp=80.1 pwm=0.450 sd_pos=365696 sysload=0.17 cputime=99.895 memavail=7290152 print_time=2552.035 buffer_time=2.237 print_stall=0 extruder: target=240 temp=239.8 pwm=0.573
Stats 797327.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2401460 bytes_read=681231 bytes_retransmit=9 bytes_invalid=0 send_seq=48193 receive_seq=48193 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=80.1 pwm=0.487 sd_pos=366225 sysload=0.17 cputime=99.975 memavail=7289928 print_time=2553.171 buffer_time=2.372 print_stall=0 extruder: target=240 temp=239.7 pwm=0.613
Stats 797328.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2403834 bytes_read=681759 bytes_retransmit=9 bytes_invalid=0 send_seq=48240 receive_seq=48240 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992929 heater_bed: target=80 temp=80.1 pwm=0.399 sd_pos=366807 sysload=0.17 cputime=100.044 memavail=7287788 print_time=2554.377 buffer_time=2.577 print_stall=0 extruder: target=240 temp=240.2 pwm=0.340
Stats 797329.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2404883 bytes_read=682176 bytes_retransmit=9 bytes_invalid=0 send_seq=48265 receive_seq=48265 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992929 heater_bed: target=80 temp=80.1 pwm=0.412 sd_pos=366951 sysload=0.24 cputime=100.100 memavail=7290404 print_time=2554.872 buffer_time=2.072 print_stall=0 extruder: target=240 temp=240.1 pwm=0.310
Stats 797330.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2410267 bytes_read=682949 bytes_retransmit=9 bytes_invalid=0 send_seq=48364 receive_seq=48364 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=80 temp=80.0 pwm=0.587 sd_pos=367816 sysload=0.24 cputime=100.156 memavail=7290404 print_time=2556.331 buffer_time=2.530 print_stall=0 extruder: target=240 temp=240.5 pwm=0.219
Stats 797331.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2414041 bytes_read=683623 bytes_retransmit=9 bytes_invalid=0 send_seq=48437 receive_seq=48437 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=75 freq=119992911 heater_bed: target=80 temp=80.0 pwm=0.500 sd_pos=368529 sysload=0.24 cputime=100.208 memavail=7290180 print_time=2556.993 buffer_time=2.191 print_stall=0 extruder: target=240 temp=240.4 pwm=0.253
Stats 797332.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2416910 bytes_read=684185 bytes_retransmit=9 bytes_invalid=0 send_seq=48491 receive_seq=48491 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=4275 freq=119992904 heater_bed: target=80 temp=80.0 pwm=0.563 sd_pos=369897 sysload=0.24 cputime=100.280 memavail=7290180 print_time=2558.322 buffer_time=2.519 print_stall=0 extruder: target=240 temp=239.5 pwm=0.681
Stats 797333.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2422610 bytes_read=684958 bytes_retransmit=9 bytes_invalid=0 send_seq=48590 receive_seq=48590 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=2269 freq=119992914 heater_bed: target=80 temp=80.1 pwm=0.336 sd_pos=370579 sysload=0.24 cputime=100.352 memavail=7290180 print_time=2558.958 buffer_time=2.154 print_stall=0 extruder: target=240 temp=239.8 pwm=0.461
Stats 797334.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2428314 bytes_read=685736 bytes_retransmit=9 bytes_invalid=0 send_seq=48687 receive_seq=48687 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=3588 freq=119992906 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=372084 sysload=0.22 cputime=100.486 memavail=7290180 print_time=2560.283 buffer_time=2.479 print_stall=0 extruder: target=240 temp=240.2 pwm=0.305
Stats 797335.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2433857 bytes_read=686519 bytes_retransmit=9 bytes_invalid=0 send_seq=48783 receive_seq=48783 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=1368 freq=119992899 heater_bed: target=80 temp=80.0 pwm=0.706 sd_pos=372785 sysload=0.22 cputime=100.592 memavail=7290180 print_time=2560.902 buffer_time=2.097 print_stall=0 extruder: target=240 temp=239.9 pwm=0.537
Stats 797336.3: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2439350 bytes_read=687283 bytes_retransmit=9 bytes_invalid=0 send_seq=48877 receive_seq=48877 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1798 freq=119992896 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=374091 sysload=0.22 cputime=100.712 memavail=7290184 print_time=2562.068 buffer_time=2.262 print_stall=0 extruder: target=240 temp=239.9 pwm=0.479
Stats 797337.3: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2444475 bytes_read=688016 bytes_retransmit=9 bytes_invalid=0 send_seq=48965 receive_seq=48965 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=4109 freq=119992891 heater_bed: target=80 temp=80.0 pwm=0.503 sd_pos=375568 sysload=0.22 cputime=100.829 memavail=7290184 print_time=2563.486 buffer_time=2.680 print_stall=0 extruder: target=240 temp=240.3 pwm=0.332
Stats 797338.3: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2449518 bytes_read=688738 bytes_retransmit=9 bytes_invalid=0 send_seq=49051 receive_seq=49051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2921 freq=119992891 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=376207 sysload=0.22 cputime=100.929 memavail=7290184 print_time=2564.163 buffer_time=2.356 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 797339.3: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2454802 bytes_read=689471 bytes_retransmit=9 bytes_invalid=0 send_seq=49142 receive_seq=49142 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=1973 freq=119992891 heater_bed: target=80 temp=80.0 pwm=0.646 sd_pos=376877 sysload=0.20 cputime=101.033 memavail=7290184 print_time=2564.934 buffer_time=2.127 print_stall=0 extruder: target=240 temp=240.3 pwm=0.302
Stats 797340.3: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2460345 bytes_read=690239 bytes_retransmit=9 bytes_invalid=0 send_seq=49237 receive_seq=49237 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=3658 freq=119992893 heater_bed: target=80 temp=80.1 pwm=0.315 sd_pos=378162 sysload=0.20 cputime=101.149 memavail=7290184 print_time=2566.355 buffer_time=2.548 print_stall=0 extruder: target=240 temp=239.8 pwm=0.583
Stats 797341.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2465747 bytes_read=691012 bytes_retransmit=9 bytes_invalid=0 send_seq=49330 receive_seq=49330 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=2141 freq=119992927 heater_bed: target=80 temp=80.1 pwm=0.331 sd_pos=378855 sysload=0.20 cputime=101.250 memavail=7290184 print_time=2566.956 buffer_time=2.148 print_stall=0 extruder: target=240 temp=239.8 pwm=0.570
Stats 797342.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2470669 bytes_read=691715 bytes_retransmit=9 bytes_invalid=0 send_seq=49415 receive_seq=49415 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=1032 freq=119992920 heater_bed: target=80 temp=80.1 pwm=0.430 sd_pos=379646 sysload=0.20 cputime=101.352 memavail=7290184 print_time=2568.280 buffer_time=2.472 print_stall=0 extruder: target=240 temp=239.6 pwm=0.608
Stats 797343.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2472808 bytes_read=692213 bytes_retransmit=9 bytes_invalid=0 send_seq=49456 receive_seq=49456 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992916 heater_bed: target=80 temp=80.1 pwm=0.424 sd_pos=379705 sysload=0.20 cputime=101.407 memavail=7290184 print_time=2569.054 buffer_time=2.245 print_stall=0 extruder: target=240 temp=239.6 pwm=0.631
Stats 797344.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2474602 bytes_read=692710 bytes_retransmit=9 bytes_invalid=0 send_seq=49497 receive_seq=49497 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992921 heater_bed: target=80 temp=80.1 pwm=0.426 sd_pos=379873 sysload=0.18 cputime=101.470 memavail=7290080 print_time=2569.972 buffer_time=2.163 print_stall=0 extruder: target=240 temp=240.2 pwm=0.348
Stats 797345.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2475906 bytes_read=693153 bytes_retransmit=9 bytes_invalid=0 send_seq=49530 receive_seq=49530 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992933 heater_bed: target=80 temp=80.1 pwm=0.357 sd_pos=379902 sysload=0.18 cputime=101.533 memavail=7289920 print_time=2570.871 buffer_time=2.061 print_stall=0 extruder: target=240 temp=240.4 pwm=0.269
Stats 797346.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2480714 bytes_read=693912 bytes_retransmit=9 bytes_invalid=0 send_seq=49620 receive_seq=49620 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992924 heater_bed: target=80 temp=80.0 pwm=0.754 sd_pos=380699 sysload=0.18 cputime=101.612 memavail=7289668 print_time=2572.270 buffer_time=2.460 print_stall=0 extruder: target=240 temp=240.1 pwm=0.487
Stats 797347.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2484379 bytes_read=694569 bytes_retransmit=9 bytes_invalid=0 send_seq=49693 receive_seq=49693 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992918 heater_bed: target=80 temp=80.0 pwm=0.573 sd_pos=381479 sysload=0.18 cputime=101.677 memavail=7289668 print_time=2572.862 buffer_time=2.050 print_stall=0 extruder: target=240 temp=240.1 pwm=0.508
Stats 797348.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2487418 bytes_read=695132 bytes_retransmit=9 bytes_invalid=0 send_seq=49750 receive_seq=49750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=3594 freq=119992913 heater_bed: target=80 temp=80.0 pwm=0.497 sd_pos=382820 sysload=0.18 cputime=101.765 memavail=7289668 print_time=2574.137 buffer_time=2.326 print_stall=0 extruder: target=240 temp=240.1 pwm=0.405
Stats 797349.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2493546 bytes_read=695945 bytes_retransmit=9 bytes_invalid=0 send_seq=49854 receive_seq=49854 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=2502 freq=119992909 heater_bed: target=80 temp=80.0 pwm=0.335 sd_pos=383625 sysload=0.17 cputime=101.869 memavail=7289668 print_time=2575.082 buffer_time=2.270 print_stall=0 extruder: target=240 temp=239.7 pwm=0.603
Stats 797350.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2498962 bytes_read=696697 bytes_retransmit=9 bytes_invalid=0 send_seq=49946 receive_seq=49946 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=3237 freq=119992915 heater_bed: target=80 temp=80.0 pwm=0.347 sd_pos=384588 sysload=0.17 cputime=101.982 memavail=7289668 print_time=2576.383 buffer_time=2.570 print_stall=0 extruder: target=240 temp=240.5 pwm=0.198
Stats 797351.3: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2504109 bytes_read=697436 bytes_retransmit=9 bytes_invalid=0 send_seq=50035 receive_seq=50035 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1025 freq=119992908 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=384846 sysload=0.17 cputime=102.073 memavail=7289668 print_time=2577.209 buffer_time=2.395 print_stall=0 extruder: target=240 temp=240.2 pwm=0.413
Stats 797352.3: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2506534 bytes_read=697964 bytes_retransmit=9 bytes_invalid=0 send_seq=50082 receive_seq=50082 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=384876 sysload=0.17 cputime=102.130 memavail=7289668 print_time=2578.008 buffer_time=2.193 print_stall=0 extruder: target=240 temp=240.3 pwm=0.371
Stats 797353.3: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2508536 bytes_read=698465 bytes_retransmit=9 bytes_invalid=0 send_seq=50125 receive_seq=50125 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=385109 sysload=0.17 cputime=102.184 memavail=7289444 print_time=2579.567 buffer_time=2.751 print_stall=0 extruder: target=240 temp=240.4 pwm=0.355
Stats 797354.3: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2509468 bytes_read=698866 bytes_retransmit=9 bytes_invalid=0 send_seq=50151 receive_seq=50151 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=80.1 pwm=0.354 sd_pos=385260 sysload=0.23 cputime=102.242 memavail=7289444 print_time=2580.096 buffer_time=2.280 print_stall=0 extruder: target=240 temp=240.1 pwm=0.458
Stats 797355.3: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2511403 bytes_read=699359 bytes_retransmit=9 bytes_invalid=0 send_seq=50192 receive_seq=50192 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992904 heater_bed: target=80 temp=80.1 pwm=0.437 sd_pos=385502 sysload=0.23 cputime=102.307 memavail=7289444 print_time=2581.243 buffer_time=2.426 print_stall=0 extruder: target=240 temp=240.1 pwm=0.458
Stats 797356.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2512381 bytes_read=699797 bytes_retransmit=9 bytes_invalid=0 send_seq=50218 receive_seq=50218 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992900 heater_bed: target=80 temp=80.1 pwm=0.450 sd_pos=385561 sysload=0.23 cputime=102.365 memavail=7289700 print_time=2582.152 buffer_time=2.334 print_stall=0 extruder: target=240 temp=239.4 pwm=0.706
Stats 797357.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2513153 bytes_read=700195 bytes_retransmit=9 bytes_invalid=0 send_seq=50242 receive_seq=50242 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=80.1 pwm=0.452 sd_pos=385646 sysload=0.23 cputime=102.419 memavail=7289252 print_time=2583.046 buffer_time=2.227 print_stall=0 extruder: target=240 temp=239.8 pwm=0.465
Stats 797358.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2516371 bytes_read=700798 bytes_retransmit=9 bytes_invalid=0 send_seq=50304 receive_seq=50304 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=80.1 pwm=0.469 sd_pos=386107 sysload=0.23 cputime=102.490 memavail=7289028 print_time=2584.393 buffer_time=2.573 print_stall=0 extruder: target=240 temp=240.1 pwm=0.326
Stats 797359.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2517907 bytes_read=701270 bytes_retransmit=9 bytes_invalid=0 send_seq=50340 receive_seq=50340 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992890 heater_bed: target=80 temp=80.1 pwm=0.472 sd_pos=386411 sysload=0.22 cputime=102.554 memavail=7289028 print_time=2585.111 buffer_time=2.291 print_stall=0 extruder: target=240 temp=240.4 pwm=0.316
Stats 797360.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2519907 bytes_read=701758 bytes_retransmit=9 bytes_invalid=0 send_seq=50382 receive_seq=50382 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992886 heater_bed: target=80 temp=80.1 pwm=0.327 sd_pos=386992 sysload=0.22 cputime=102.617 memavail=7289028 print_time=2585.956 buffer_time=2.136 print_stall=0 extruder: target=240 temp=240.4 pwm=0.340
Stats 797361.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2521961 bytes_read=702286 bytes_retransmit=9 bytes_invalid=0 send_seq=50426 receive_seq=50426 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.1 pwm=0.514 sd_pos=387332 sysload=0.22 cputime=102.696 memavail=7289028 print_time=2587.243 buffer_time=2.422 print_stall=0 extruder: target=240 temp=239.8 pwm=0.641
Stats 797362.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2524686 bytes_read=702853 bytes_retransmit=9 bytes_invalid=0 send_seq=50481 receive_seq=50481 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.1 pwm=0.335 sd_pos=387742 sysload=0.22 cputime=102.774 memavail=7289028 print_time=2588.163 buffer_time=2.342 print_stall=0 extruder: target=240 temp=239.4 pwm=0.698
Stats 797363.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2528380 bytes_read=703486 bytes_retransmit=9 bytes_invalid=0 send_seq=50552 receive_seq=50552 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992899 heater_bed: target=80 temp=80.0 pwm=0.521 sd_pos=388512 sysload=0.22 cputime=102.857 memavail=7290668 print_time=2588.856 buffer_time=2.035 print_stall=0 extruder: target=240 temp=240.0 pwm=0.364
Stats 797364.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2533015 bytes_read=704179 bytes_retransmit=9 bytes_invalid=0 send_seq=50632 receive_seq=50632 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1995 freq=119992900 heater_bed: target=80 temp=80.1 pwm=0.378 sd_pos=389988 sysload=0.20 cputime=102.971 memavail=7290668 print_time=2590.121 buffer_time=2.299 print_stall=0 extruder: target=240 temp=240.5 pwm=0.191
Stats 797365.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2537696 bytes_read=704871 bytes_retransmit=9 bytes_invalid=0 send_seq=50712 receive_seq=50712 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=4406 freq=119992899 heater_bed: target=80 temp=80.1 pwm=0.448 sd_pos=391410 sysload=0.20 cputime=103.095 memavail=7290668 print_time=2591.333 buffer_time=2.511 print_stall=0 extruder: target=240 temp=240.2 pwm=0.351
Stats 797366.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2542947 bytes_read=705620 bytes_retransmit=9 bytes_invalid=0 send_seq=50804 receive_seq=50803 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=2800 freq=119992943 heater_bed: target=80 temp=80.1 pwm=0.383 sd_pos=392122 sysload=0.20 cputime=103.214 memavail=7289912 print_time=2591.925 buffer_time=2.101 print_stall=0 extruder: target=240 temp=240.0 pwm=0.495
Stats 797367.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2549020 bytes_read=706428 bytes_retransmit=9 bytes_invalid=0 send_seq=50906 receive_seq=50906 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=3636 freq=119992968 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=393297 sysload=0.20 cputime=103.337 memavail=7289912 print_time=2593.245 buffer_time=2.420 print_stall=0 extruder: target=240 temp=239.6 pwm=0.660
Stats 797368.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2554968 bytes_read=707220 bytes_retransmit=9 bytes_invalid=0 send_seq=51007 receive_seq=51006 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=953 freq=119992958 heater_bed: target=80 temp=80.0 pwm=0.449 sd_pos=393563 sysload=0.20 cputime=103.448 memavail=7289912 print_time=2593.905 buffer_time=2.080 print_stall=0 extruder: target=240 temp=239.5 pwm=0.603
Stats 797369.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2560104 bytes_read=707948 bytes_retransmit=9 bytes_invalid=0 send_seq=51096 receive_seq=51096 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2538 freq=119992950 heater_bed: target=80 temp=80.0 pwm=0.548 sd_pos=394947 sysload=0.18 cputime=103.569 memavail=7289912 print_time=2595.137 buffer_time=2.311 print_stall=0 extruder: target=240 temp=240.3 pwm=0.288
Stats 797370.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2565076 bytes_read=708666 bytes_retransmit=9 bytes_invalid=0 send_seq=51181 receive_seq=51181 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2150 freq=119992941 heater_bed: target=80 temp=80.0 pwm=0.497 sd_pos=395607 sysload=0.18 cputime=103.676 memavail=7289912 print_time=2595.913 buffer_time=2.085 print_stall=0 extruder: target=240 temp=240.0 pwm=0.424
Stats 797371.3: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2570621 bytes_read=709449 bytes_retransmit=9 bytes_invalid=0 send_seq=51276 receive_seq=51276 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=3740 freq=119992932 heater_bed: target=80 temp=80.1 pwm=0.381 sd_pos=396877 sysload=0.18 cputime=103.795 memavail=7289912 print_time=2597.218 buffer_time=2.389 print_stall=0 extruder: target=240 temp=240.2 pwm=0.369
Stats 797372.3: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2576341 bytes_read=710212 bytes_retransmit=9 bytes_invalid=0 send_seq=51373 receive_seq=51373 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=4522 freq=119992933 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=398268 sysload=0.18 cputime=103.913 memavail=7289912 print_time=2598.401 buffer_time=2.571 print_stall=0 extruder: target=240 temp=240.2 pwm=0.430
Stats 797373.3: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2582054 bytes_read=710995 bytes_retransmit=9 bytes_invalid=0 send_seq=51471 receive_seq=51471 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=2163 freq=119992932 heater_bed: target=80 temp=80.0 pwm=0.488 sd_pos=398908 sysload=0.18 cputime=104.021 memavail=7289912 print_time=2598.943 buffer_time=2.113 print_stall=0 extruder: target=240 temp=240.1 pwm=0.438
Stats 797374.3: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2587499 bytes_read=711757 bytes_retransmit=9 bytes_invalid=0 send_seq=51565 receive_seq=51565 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1361 freq=119992934 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=399972 sysload=0.17 cputime=104.149 memavail=7290060 print_time=2599.906 buffer_time=2.075 print_stall=0 extruder: target=240 temp=239.6 pwm=0.671
Stats 797375.3: gcodein=0  mcu: mcu_awake=0.028 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2590965 bytes_read=712340 bytes_retransmit=9 bytes_invalid=0 send_seq=51626 receive_seq=51626 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992931 heater_bed: target=80 temp=80.0 pwm=0.549 sd_pos=400167 sysload=0.17 cputime=104.234 memavail=7290136 print_time=2600.913 buffer_time=2.081 print_stall=0 extruder: target=240 temp=239.9 pwm=0.485
Stats 797376.3: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2592953 bytes_read=712859 bytes_retransmit=9 bytes_invalid=0 send_seq=51668 receive_seq=51668 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992928 heater_bed: target=80 temp=80.0 pwm=0.356 sd_pos=400337 sysload=0.17 cputime=104.305 memavail=7289644 print_time=2601.973 buffer_time=2.140 print_stall=0 extruder: target=240 temp=240.1 pwm=0.378
Stats 797377.3: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2594809 bytes_read=713356 bytes_retransmit=9 bytes_invalid=0 send_seq=51709 receive_seq=51709 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992950 heater_bed: target=80 temp=80.0 pwm=0.556 sd_pos=400424 sysload=0.17 cputime=104.376 memavail=7289644 print_time=2603.504 buffer_time=2.671 print_stall=0 extruder: target=240 temp=240.4 pwm=0.352
Stats 797378.3: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2595484 bytes_read=713734 bytes_retransmit=9 bytes_invalid=0 send_seq=51729 receive_seq=51729 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992941 heater_bed: target=80 temp=80.0 pwm=0.532 sd_pos=400482 sysload=0.17 cputime=104.435 memavail=7289644 print_time=2603.926 buffer_time=2.091 print_stall=0 extruder: target=240 temp=240.4 pwm=0.299
Stats 797379.3: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2599991 bytes_read=714452 bytes_retransmit=9 bytes_invalid=0 send_seq=51814 receive_seq=51814 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992934 heater_bed: target=80 temp=80.1 pwm=0.365 sd_pos=401224 sysload=0.15 cputime=104.506 memavail=7289644 print_time=2604.938 buffer_time=2.103 print_stall=0 extruder: target=240 temp=240.3 pwm=0.376
Stats 797380.3: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2604582 bytes_read=715169 bytes_retransmit=9 bytes_invalid=0 send_seq=51899 receive_seq=51899 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=1626 freq=119992936 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=402742 sysload=0.15 cputime=104.594 memavail=7289644 print_time=2606.114 buffer_time=2.278 print_stall=0 extruder: target=240 temp=240.3 pwm=0.259
Stats 797381.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2608837 bytes_read=715833 bytes_retransmit=9 bytes_invalid=0 send_seq=51973 receive_seq=51973 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=4808 freq=119992934 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=404178 sysload=0.15 cputime=104.705 memavail=7289644 print_time=2607.603 buffer_time=2.766 print_stall=0 extruder: target=240 temp=240.3 pwm=0.253
Stats 797382.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2614344 bytes_read=716591 bytes_retransmit=9 bytes_invalid=0 send_seq=52066 receive_seq=52066 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=1948 freq=119992934 heater_bed: target=80 temp=80.0 pwm=0.539 sd_pos=404547 sysload=0.15 cputime=104.800 memavail=7289644 print_time=2608.114 buffer_time=2.277 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 797383.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2619542 bytes_read=717333 bytes_retransmit=9 bytes_invalid=0 send_seq=52156 receive_seq=52156 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=1375 freq=119992929 heater_bed: target=80 temp=80.0 pwm=0.528 sd_pos=405050 sysload=0.15 cputime=104.904 memavail=7289644 print_time=2609.349 buffer_time=2.511 print_stall=0 extruder: target=240 temp=239.8 pwm=0.480
Stats 797384.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2622474 bytes_read=717891 bytes_retransmit=9 bytes_invalid=0 send_seq=52212 receive_seq=52212 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=80.1 pwm=0.383 sd_pos=405108 sysload=0.14 cputime=104.980 memavail=7289644 print_time=2610.183 buffer_time=2.344 print_stall=0 extruder: target=240 temp=240.0 pwm=0.438
Stats 797385.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2624472 bytes_read=718394 bytes_retransmit=9 bytes_invalid=0 send_seq=52254 receive_seq=52254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=80.0 pwm=0.534 sd_pos=405353 sysload=0.14 cputime=105.043 memavail=7289644 print_time=2611.742 buffer_time=2.901 print_stall=0 extruder: target=240 temp=240.1 pwm=0.495
Stats 797386.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2625392 bytes_read=718832 bytes_retransmit=9 bytes_invalid=0 send_seq=52280 receive_seq=52280 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992918 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=405504 sysload=0.14 cputime=105.098 memavail=7289396 print_time=2612.271 buffer_time=2.430 print_stall=0 extruder: target=240 temp=240.2 pwm=0.391
Stats 797387.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2627342 bytes_read=719310 bytes_retransmit=9 bytes_invalid=0 send_seq=52320 receive_seq=52320 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992915 heater_bed: target=80 temp=80.1 pwm=0.360 sd_pos=405746 sysload=0.14 cputime=105.156 memavail=7289396 print_time=2613.417 buffer_time=2.576 print_stall=0 extruder: target=240 temp=239.8 pwm=0.587
Stats 797388.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2628270 bytes_read=719723 bytes_retransmit=9 bytes_invalid=0 send_seq=52344 receive_seq=52344 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992910 heater_bed: target=80 temp=80.1 pwm=0.420 sd_pos=405805 sysload=0.14 cputime=105.213 memavail=7289396 print_time=2614.326 buffer_time=2.484 print_stall=0 extruder: target=240 temp=240.4 pwm=0.309
Stats 797389.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2629044 bytes_read=720134 bytes_retransmit=9 bytes_invalid=0 send_seq=52369 receive_seq=52369 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992906 heater_bed: target=80 temp=80.1 pwm=0.456 sd_pos=405890 sysload=0.21 cputime=105.272 memavail=7289396 print_time=2615.221 buffer_time=2.377 print_stall=0 extruder: target=240 temp=239.7 pwm=0.604
Stats 797390.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2632263 bytes_read=720720 bytes_retransmit=9 bytes_invalid=0 send_seq=52432 receive_seq=52432 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992904 heater_bed: target=80 temp=80.1 pwm=0.384 sd_pos=406353 sysload=0.21 cputime=105.340 memavail=7289396 print_time=2616.568 buffer_time=2.723 print_stall=0 extruder: target=240 temp=239.7 pwm=0.582
Stats 797391.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2633224 bytes_read=721160 bytes_retransmit=9 bytes_invalid=0 send_seq=52459 receive_seq=52459 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992897 heater_bed: target=80 temp=80.1 pwm=0.375 sd_pos=406436 sysload=0.21 cputime=105.397 memavail=7289396 print_time=2616.882 buffer_time=2.036 print_stall=0 extruder: target=240 temp=239.8 pwm=0.525
Stats 797392.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2635869 bytes_read=721722 bytes_retransmit=9 bytes_invalid=0 send_seq=52513 receive_seq=52513 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992900 heater_bed: target=80 temp=80.1 pwm=0.448 sd_pos=407239 sysload=0.21 cputime=105.472 memavail=7289172 print_time=2618.131 buffer_time=2.285 print_stall=0 extruder: target=240 temp=239.8 pwm=0.519
Stats 797393.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2637162 bytes_read=722155 bytes_retransmit=9 bytes_invalid=0 send_seq=52544 receive_seq=52544 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992896 heater_bed: target=80 temp=80.0 pwm=0.573 sd_pos=407435 sysload=0.21 cputime=105.533 memavail=7289172 print_time=2618.922 buffer_time=2.076 print_stall=0 extruder: target=240 temp=240.1 pwm=0.392
Stats 797394.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2640730 bytes_read=722793 bytes_retransmit=9 bytes_invalid=0 send_seq=52613 receive_seq=52613 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992893 heater_bed: target=80 temp=80.1 pwm=0.516 sd_pos=408161 sysload=0.19 cputime=105.610 memavail=7289172 print_time=2620.292 buffer_time=2.445 print_stall=0 extruder: target=240 temp=240.1 pwm=0.468
Stats 797395.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2644608 bytes_read=723445 bytes_retransmit=9 bytes_invalid=0 send_seq=52685 receive_seq=52685 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992946 heater_bed: target=80 temp=80.0 pwm=0.516 sd_pos=408936 sysload=0.19 cputime=105.686 memavail=7289172 print_time=2620.990 buffer_time=2.143 print_stall=0 extruder: target=240 temp=240.1 pwm=0.414
Stats 797396.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2648369 bytes_read=724084 bytes_retransmit=9 bytes_invalid=0 send_seq=52754 receive_seq=52754 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2220 freq=119992938 heater_bed: target=80 temp=80.1 pwm=0.450 sd_pos=410472 sysload=0.19 cputime=105.773 memavail=7289320 print_time=2622.219 buffer_time=2.370 print_stall=0 extruder: target=240 temp=240.2 pwm=0.411
Stats 797397.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2653397 bytes_read=724823 bytes_retransmit=9 bytes_invalid=0 send_seq=52841 receive_seq=52841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=3478 freq=119992919 heater_bed: target=80 temp=80.1 pwm=0.439 sd_pos=411952 sysload=0.19 cputime=105.892 memavail=7289424 print_time=2623.350 buffer_time=2.502 print_stall=0 extruder: target=240 temp=240.1 pwm=0.461
Stats 797398.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2658416 bytes_read=725550 bytes_retransmit=9 bytes_invalid=0 send_seq=52928 receive_seq=52928 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1782 freq=119992916 heater_bed: target=80 temp=80.1 pwm=0.428 sd_pos=412749 sysload=0.19 cputime=105.998 memavail=7289424 print_time=2623.926 buffer_time=2.076 print_stall=0 extruder: target=240 temp=240.3 pwm=0.301
Stats 797399.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2663802 bytes_read=726288 bytes_retransmit=9 bytes_invalid=0 send_seq=53020 receive_seq=53020 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=3045 freq=119992916 heater_bed: target=80 temp=80.0 pwm=0.518 sd_pos=413882 sysload=0.18 cputime=106.107 memavail=7289424 print_time=2625.213 buffer_time=2.363 print_stall=0 extruder: target=240 temp=240.1 pwm=0.420
Stats 797400.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2669372 bytes_read=727061 bytes_retransmit=9 bytes_invalid=0 send_seq=53116 receive_seq=53116 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1202 freq=119992910 heater_bed: target=80 temp=80.1 pwm=0.412 sd_pos=414378 sysload=0.18 cputime=106.214 memavail=7289424 print_time=2625.970 buffer_time=2.120 print_stall=0 extruder: target=240 temp=239.6 pwm=0.623
Stats 797401.3: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2674491 bytes_read=727814 bytes_retransmit=9 bytes_invalid=0 send_seq=53205 receive_seq=53205 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=2919 freq=119992902 heater_bed: target=80 temp=80.0 pwm=0.534 sd_pos=415592 sysload=0.18 cputime=106.328 memavail=7289424 print_time=2627.245 buffer_time=2.394 print_stall=0 extruder: target=240 temp=240.1 pwm=0.388
Stats 797402.3: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2679438 bytes_read=728517 bytes_retransmit=9 bytes_invalid=0 send_seq=53290 receive_seq=53290 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=4509 freq=119992902 heater_bed: target=80 temp=80.0 pwm=0.400 sd_pos=416805 sysload=0.18 cputime=106.430 memavail=7289424 print_time=2628.519 buffer_time=2.667 print_stall=0 extruder: target=240 temp=239.8 pwm=0.535
Stats 797403.3: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2684985 bytes_read=729280 bytes_retransmit=9 bytes_invalid=0 send_seq=53384 receive_seq=53384 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=2325 freq=119992937 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=417577 sysload=0.18 cputime=106.532 memavail=7289424 print_time=2629.110 buffer_time=2.257 print_stall=0 extruder: target=240 temp=240.2 pwm=0.388
Stats 797404.3: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2690600 bytes_read=730047 bytes_retransmit=9 bytes_invalid=0 send_seq=53479 receive_seq=53479 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=41 upcoming_bytes=2755 freq=119992932 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=418780 sysload=0.16 cputime=106.667 memavail=7289572 print_time=2630.435 buffer_time=2.581 print_stall=0 extruder: target=240 temp=240.3 pwm=0.385
Stats 797405.3: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2695746 bytes_read=730770 bytes_retransmit=9 bytes_invalid=0 send_seq=53568 receive_seq=53568 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1239 freq=119992922 heater_bed: target=80 temp=80.0 pwm=0.511 sd_pos=419649 sysload=0.16 cputime=106.778 memavail=7289652 print_time=2631.348 buffer_time=2.494 print_stall=0 extruder: target=240 temp=239.8 pwm=0.588
Stats 797406.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2698587 bytes_read=731359 bytes_retransmit=9 bytes_invalid=0 send_seq=53624 receive_seq=53624 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=80 temp=80.0 pwm=0.504 sd_pos=419736 sysload=0.16 cputime=106.847 memavail=7289652 print_time=2632.073 buffer_time=2.218 print_stall=0 extruder: target=240 temp=240.1 pwm=0.373
Stats 797407.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2700545 bytes_read=731856 bytes_retransmit=9 bytes_invalid=0 send_seq=53665 receive_seq=53665 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992961 heater_bed: target=80 temp=80.0 pwm=0.533 sd_pos=419904 sysload=0.16 cputime=106.907 memavail=7289652 print_time=2633.134 buffer_time=2.279 print_stall=0 extruder: target=240 temp=239.8 pwm=0.409
Stats 797408.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2701685 bytes_read=732274 bytes_retransmit=9 bytes_invalid=0 send_seq=53693 receive_seq=53693 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992952 heater_bed: target=80 temp=80.0 pwm=0.363 sd_pos=419991 sysload=0.16 cputime=106.959 memavail=7289652 print_time=2633.981 buffer_time=2.125 print_stall=0 extruder: target=240 temp=240.1 pwm=0.353
Stats 797409.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2703065 bytes_read=732722 bytes_retransmit=9 bytes_invalid=0 send_seq=53724 receive_seq=53724 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992945 heater_bed: target=80 temp=80.1 pwm=0.304 sd_pos=420049 sysload=0.15 cputime=107.015 memavail=7289652 print_time=2635.087 buffer_time=2.230 print_stall=0 extruder: target=240 temp=240.0 pwm=0.525
Stats 797410.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2707621 bytes_read=733439 bytes_retransmit=9 bytes_invalid=0 send_seq=53809 receive_seq=53809 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992937 heater_bed: target=80 temp=80.0 pwm=0.559 sd_pos=420755 sysload=0.15 cputime=107.081 memavail=7289652 print_time=2636.088 buffer_time=2.231 print_stall=0 extruder: target=240 temp=240.5 pwm=0.280
Stats 797411.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2711871 bytes_read=734128 bytes_retransmit=9 bytes_invalid=0 send_seq=53888 receive_seq=53888 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=1846 freq=119992931 heater_bed: target=80 temp=80.0 pwm=0.504 sd_pos=422327 sysload=0.15 cputime=107.156 memavail=7289652 print_time=2637.246 buffer_time=2.388 print_stall=0 extruder: target=240 temp=239.9 pwm=0.607
Stats 797412.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2715675 bytes_read=734775 bytes_retransmit=9 bytes_invalid=0 send_seq=53956 receive_seq=53956 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=1889 freq=119992945 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=422968 sysload=0.15 cputime=107.242 memavail=7289652 print_time=2637.991 buffer_time=2.132 print_stall=0 extruder: target=240 temp=239.6 pwm=0.647
Stats 797413.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2721502 bytes_read=735543 bytes_retransmit=9 bytes_invalid=0 send_seq=54055 receive_seq=54054 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1275 freq=119992939 heater_bed: target=80 temp=80.0 pwm=0.510 sd_pos=423897 sysload=0.15 cputime=107.358 memavail=7289652 print_time=2639.247 buffer_time=2.388 print_stall=0 extruder: target=240 temp=239.5 pwm=0.612
Stats 797414.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2724194 bytes_read=736086 bytes_retransmit=9 bytes_invalid=0 send_seq=54107 receive_seq=54107 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992940 heater_bed: target=80 temp=80.0 pwm=0.520 sd_pos=423927 sysload=0.22 cputime=107.430 memavail=7289428 print_time=2640.046 buffer_time=2.186 print_stall=0 extruder: target=240 temp=239.6 pwm=0.533
Stats 797415.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2726163 bytes_read=736603 bytes_retransmit=9 bytes_invalid=0 send_seq=54149 receive_seq=54149 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992939 heater_bed: target=80 temp=80.0 pwm=0.498 sd_pos=424160 sysload=0.22 cputime=107.496 memavail=7289428 print_time=2641.606 buffer_time=2.745 print_stall=0 extruder: target=240 temp=240.1 pwm=0.410
Stats 797416.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2727082 bytes_read=737027 bytes_retransmit=9 bytes_invalid=0 send_seq=54175 receive_seq=54175 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992980 heater_bed: target=80 temp=80.0 pwm=0.445 sd_pos=424311 sysload=0.22 cputime=107.560 memavail=7289428 print_time=2642.135 buffer_time=2.274 print_stall=0 extruder: target=240 temp=240.1 pwm=0.435
Stats 797417.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2729029 bytes_read=737510 bytes_retransmit=9 bytes_invalid=0 send_seq=54216 receive_seq=54216 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992974 heater_bed: target=80 temp=80.0 pwm=0.445 sd_pos=424565 sysload=0.22 cputime=107.617 memavail=7289204 print_time=2643.281 buffer_time=2.420 print_stall=0 extruder: target=240 temp=240.2 pwm=0.413
Stats 797418.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2730004 bytes_read=737947 bytes_retransmit=9 bytes_invalid=0 send_seq=54242 receive_seq=54242 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992965 heater_bed: target=80 temp=80.1 pwm=0.321 sd_pos=424624 sysload=0.22 cputime=107.675 memavail=7289204 print_time=2644.190 buffer_time=2.328 print_stall=0 extruder: target=240 temp=240.1 pwm=0.430
Stats 797419.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2730755 bytes_read=738335 bytes_retransmit=9 bytes_invalid=0 send_seq=54264 receive_seq=54264 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992958 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=424709 sysload=0.20 cputime=107.729 memavail=7288980 print_time=2645.084 buffer_time=2.221 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 797420.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2733946 bytes_read=738913 bytes_retransmit=9 bytes_invalid=0 send_seq=54324 receive_seq=54324 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992953 heater_bed: target=80 temp=80.1 pwm=0.450 sd_pos=425170 sysload=0.20 cputime=107.809 memavail=7288980 print_time=2646.431 buffer_time=2.568 print_stall=0 extruder: target=240 temp=239.9 pwm=0.440
Stats 797421.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=2735528 bytes_read=739410 bytes_retransmit=9 bytes_invalid=0 send_seq=54359 receive_seq=54359 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992950 heater_bed: target=80 temp=80.1 pwm=0.379 sd_pos=425474 sysload=0.20 cputime=107.872 memavail=7288980 print_time=2647.150 buffer_time=2.286 print_stall=0 extruder: target=240 temp=239.8 pwm=0.516
Stats 797422.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=2737517 bytes_read=739903 bytes_retransmit=9 bytes_invalid=0 send_seq=54402 receive_seq=54402 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992940 heater_bed: target=80 temp=80.1 pwm=0.440 sd_pos=426056 sysload=0.20 cputime=107.937 memavail=7288980 print_time=2647.995 buffer_time=2.129 print_stall=0 extruder: target=240 temp=239.8 pwm=0.530
Stats 797423.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=2739522 bytes_read=740386 bytes_retransmit=9 bytes_invalid=0 send_seq=54443 receive_seq=54443 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992932 heater_bed: target=80 temp=80.1 pwm=0.440 sd_pos=426396 sysload=0.20 cputime=108.006 memavail=7288980 print_time=2649.281 buffer_time=2.415 print_stall=0 extruder: target=240 temp=239.7 pwm=0.530
Stats 797424.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=2742419 bytes_read=740976 bytes_retransmit=9 bytes_invalid=0 send_seq=54500 receive_seq=54500 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992926 heater_bed: target=80 temp=80.1 pwm=0.439 sd_pos=427001 sysload=0.18 cputime=108.080 memavail=7288980 print_time=2650.181 buffer_time=2.314 print_stall=0 extruder: target=240 temp=240.0 pwm=0.419
Stats 797425.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2748379 bytes_read=741798 bytes_retransmit=9 bytes_invalid=0 send_seq=54607 receive_seq=54607 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=585 freq=119992955 heater_bed: target=80 temp=80.1 pwm=0.389 sd_pos=428458 sysload=0.18 cputime=108.172 memavail=7288980 print_time=2651.424 buffer_time=2.556 print_stall=0 extruder: target=240 temp=240.0 pwm=0.419
Stats 797426.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2750591 bytes_read=742284 bytes_retransmit=9 bytes_invalid=0 send_seq=54650 receive_seq=54650 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1835 freq=119992948 heater_bed: target=80 temp=80.1 pwm=0.397 sd_pos=429280 sysload=0.18 cputime=108.257 memavail=7288932 print_time=2652.076 buffer_time=2.207 print_stall=0 extruder: target=240 temp=239.5 pwm=0.706
Stats 797427.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2755611 bytes_read=743020 bytes_retransmit=9 bytes_invalid=0 send_seq=54736 receive_seq=54736 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=3361 freq=119992943 heater_bed: target=80 temp=80.1 pwm=0.456 sd_pos=430839 sysload=0.18 cputime=108.375 memavail=7288992 print_time=2653.238 buffer_time=2.368 print_stall=0 extruder: target=240 temp=239.9 pwm=0.441
Stats 797428.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2760830 bytes_read=743753 bytes_retransmit=9 bytes_invalid=0 send_seq=54827 receive_seq=54827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=4313 freq=119992931 heater_bed: target=80 temp=80.0 pwm=0.571 sd_pos=432177 sysload=0.18 cputime=108.491 memavail=7288992 print_time=2654.429 buffer_time=2.558 print_stall=0 extruder: target=240 temp=240.1 pwm=0.408
Stats 797429.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2766614 bytes_read=744526 bytes_retransmit=9 bytes_invalid=0 send_seq=54926 receive_seq=54926 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=2330 freq=119992922 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=432688 sysload=0.17 cputime=108.595 memavail=7288992 print_time=2655.055 buffer_time=2.183 print_stall=0 extruder: target=240 temp=239.9 pwm=0.532
Stats 797430.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2772066 bytes_read=745298 bytes_retransmit=9 bytes_invalid=0 send_seq=55019 receive_seq=55019 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=3471 freq=119992916 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=433820 sysload=0.17 cputime=108.715 memavail=7288992 print_time=2656.361 buffer_time=2.489 print_stall=0 extruder: target=240 temp=239.9 pwm=0.540
Stats 797431.3: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2777649 bytes_read=746077 bytes_retransmit=9 bytes_invalid=0 send_seq=55116 receive_seq=55116 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=2084 freq=119992905 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=434455 sysload=0.17 cputime=108.811 memavail=7288992 print_time=2657.068 buffer_time=2.195 print_stall=0 extruder: target=240 temp=239.8 pwm=0.527
Stats 797432.3: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2782696 bytes_read=746790 bytes_retransmit=9 bytes_invalid=0 send_seq=55203 receive_seq=55203 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3611 freq=119992902 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=435691 sysload=0.17 cputime=108.917 memavail=7288992 print_time=2658.328 buffer_time=2.454 print_stall=0 extruder: target=240 temp=240.0 pwm=0.431
Stats 797433.3: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2788377 bytes_read=747582 bytes_retransmit=9 bytes_invalid=0 send_seq=55300 receive_seq=55300 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1408 freq=119992895 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=436489 sysload=0.17 cputime=109.025 memavail=7288992 print_time=2658.900 buffer_time=2.025 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 797434.3: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2793798 bytes_read=748325 bytes_retransmit=9 bytes_invalid=0 send_seq=55393 receive_seq=55393 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=2173 freq=119992915 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=437741 sysload=0.16 cputime=109.159 memavail=7288412 print_time=2660.227 buffer_time=2.351 print_stall=0 extruder: target=240 temp=240.2 pwm=0.358
Stats 797435.3: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2799219 bytes_read=749099 bytes_retransmit=9 bytes_invalid=0 send_seq=55486 receive_seq=55486 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1169 freq=119992907 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=439084 sysload=0.16 cputime=109.278 memavail=7288476 print_time=2661.341 buffer_time=2.464 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 797436.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2802579 bytes_read=749706 bytes_retransmit=9 bytes_invalid=0 send_seq=55549 receive_seq=55549 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=439585 sysload=0.16 cputime=109.345 memavail=7288120 print_time=2662.063 buffer_time=2.186 print_stall=0 extruder: target=240 temp=240.2 pwm=0.397
Stats 797437.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2804545 bytes_read=750194 bytes_retransmit=9 bytes_invalid=0 send_seq=55591 receive_seq=55591 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=80.0 pwm=0.551 sd_pos=439782 sysload=0.16 cputime=109.399 memavail=7291340 print_time=2663.124 buffer_time=2.246 print_stall=0 extruder: target=240 temp=239.9 pwm=0.539
Stats 797438.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2805718 bytes_read=750632 bytes_retransmit=9 bytes_invalid=0 send_seq=55620 receive_seq=55620 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992930 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=439869 sysload=0.16 cputime=109.455 memavail=7291340 print_time=2663.971 buffer_time=2.092 print_stall=0 extruder: target=240 temp=239.7 pwm=0.596
Stats 797439.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2807012 bytes_read=751079 bytes_retransmit=9 bytes_invalid=0 send_seq=55651 receive_seq=55651 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992921 heater_bed: target=80 temp=80.0 pwm=0.526 sd_pos=439927 sysload=0.14 cputime=109.508 memavail=7291340 print_time=2665.078 buffer_time=2.198 print_stall=0 extruder: target=240 temp=240.0 pwm=0.507
Stats 797440.3: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2810510 bytes_read=751687 bytes_retransmit=9 bytes_invalid=0 send_seq=55717 receive_seq=55717 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=440564 sysload=0.14 cputime=109.574 memavail=7291340 print_time=2665.931 buffer_time=2.050 print_stall=0 extruder: target=240 temp=240.2 pwm=0.365
Stats 797441.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2813907 bytes_read=752321 bytes_retransmit=9 bytes_invalid=0 send_seq=55782 receive_seq=55782 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992917 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=441302 sysload=0.14 cputime=109.639 memavail=7291340 print_time=2666.894 buffer_time=2.012 print_stall=0 extruder: target=240 temp=240.3 pwm=0.353
Stats 797442.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2817681 bytes_read=752948 bytes_retransmit=9 bytes_invalid=0 send_seq=55849 receive_seq=55849 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992912 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=442147 sysload=0.14 cputime=109.714 memavail=7291340 print_time=2667.980 buffer_time=2.097 print_stall=0 extruder: target=240 temp=240.3 pwm=0.394
Stats 797443.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2823165 bytes_read=753711 bytes_retransmit=9 bytes_invalid=0 send_seq=55946 receive_seq=55946 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=1515 freq=119992910 heater_bed: target=80 temp=80.0 pwm=0.524 sd_pos=443416 sysload=0.14 cputime=109.819 memavail=7291340 print_time=2669.262 buffer_time=2.380 print_stall=0 extruder: target=240 temp=240.1 pwm=0.493
Stats 797444.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2826416 bytes_read=754284 bytes_retransmit=9 bytes_invalid=0 send_seq=56002 receive_seq=56002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=2939 freq=119992908 heater_bed: target=80 temp=80.0 pwm=0.356 sd_pos=444146 sysload=0.13 cputime=109.912 memavail=7291088 print_time=2670.543 buffer_time=2.659 print_stall=0 extruder: target=240 temp=240.0 pwm=0.493
Stats 797445.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2830927 bytes_read=754971 bytes_retransmit=9 bytes_invalid=0 send_seq=56081 receive_seq=56081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=80.0 pwm=0.520 sd_pos=444176 sysload=0.13 cputime=109.983 memavail=7291088 print_time=2671.342 buffer_time=2.457 print_stall=0 extruder: target=240 temp=240.0 pwm=0.493
Stats 797446.3: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2832886 bytes_read=755475 bytes_retransmit=9 bytes_invalid=0 send_seq=56123 receive_seq=56123 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=444397 sysload=0.13 cputime=110.045 memavail=7290612 print_time=2672.901 buffer_time=3.015 print_stall=0 extruder: target=240 temp=240.2 pwm=0.353
Stats 797447.3: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2833050 bytes_read=755823 bytes_retransmit=9 bytes_invalid=0 send_seq=56134 receive_seq=56134 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992938 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=444397 sysload=0.13 cputime=110.096 memavail=7290612 print_time=2672.901 buffer_time=2.014 print_stall=0 extruder: target=240 temp=240.1 pwm=0.415
Stats 797448.3: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2835721 bytes_read=756385 bytes_retransmit=9 bytes_invalid=0 send_seq=56188 receive_seq=56188 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992936 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=444802 sysload=0.13 cputime=110.170 memavail=7290612 print_time=2674.576 buffer_time=2.688 print_stall=0 extruder: target=240 temp=240.1 pwm=0.425
Stats 797449.3: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2836498 bytes_read=756778 bytes_retransmit=9 bytes_invalid=0 send_seq=56211 receive_seq=56211 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992928 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=444802 sysload=0.20 cputime=110.228 memavail=7292320 print_time=2674.898 buffer_time=2.010 print_stall=0 extruder: target=240 temp=239.9 pwm=0.543
Stats 797450.3: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=2837419 bytes_read=757191 bytes_retransmit=9 bytes_invalid=0 send_seq=56235 receive_seq=56235 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992922 heater_bed: target=80 temp=80.0 pwm=0.490 sd_pos=444970 sysload=0.20 cputime=110.282 memavail=7292320 print_time=2676.379 buffer_time=2.490 print_stall=0 extruder: target=240 temp=240.1 pwm=0.446
Stats 797451.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2840661 bytes_read=757813 bytes_retransmit=9 bytes_invalid=0 send_seq=56298 receive_seq=56298 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=80.0 pwm=0.385 sd_pos=445433 sysload=0.20 cputime=110.346 memavail=7292320 print_time=2677.726 buffer_time=2.836 print_stall=0 extruder: target=240 temp=239.9 pwm=0.534
Stats 797452.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2841622 bytes_read=758226 bytes_retransmit=9 bytes_invalid=0 send_seq=56325 receive_seq=56325 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992974 heater_bed: target=80 temp=80.0 pwm=0.443 sd_pos=445516 sysload=0.20 cputime=110.394 memavail=7292320 print_time=2678.040 buffer_time=2.149 print_stall=0 extruder: target=240 temp=240.1 pwm=0.424
Stats 797453.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2844221 bytes_read=758784 bytes_retransmit=9 bytes_invalid=0 send_seq=56378 receive_seq=56378 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992960 heater_bed: target=80 temp=80.1 pwm=0.424 sd_pos=446319 sysload=0.20 cputime=110.459 memavail=7292096 print_time=2679.290 buffer_time=2.398 print_stall=0 extruder: target=240 temp=240.2 pwm=0.344
Stats 797454.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2845525 bytes_read=759231 bytes_retransmit=9 bytes_invalid=0 send_seq=56409 receive_seq=56409 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992947 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=446515 sysload=0.27 cputime=110.507 memavail=7292096 print_time=2680.081 buffer_time=2.188 print_stall=0 extruder: target=240 temp=240.3 pwm=0.332
Stats 797455.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2849480 bytes_read=759884 bytes_retransmit=9 bytes_invalid=0 send_seq=56484 receive_seq=56484 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992938 heater_bed: target=80 temp=80.1 pwm=0.486 sd_pos=447237 sysload=0.27 cputime=110.578 memavail=7292096 print_time=2681.533 buffer_time=2.640 print_stall=0 extruder: target=240 temp=240.2 pwm=0.438
Stats 797456.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2853491 bytes_read=760568 bytes_retransmit=9 bytes_invalid=0 send_seq=56559 receive_seq=56559 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992976 heater_bed: target=80 temp=80.1 pwm=0.450 sd_pos=447875 sysload=0.27 cputime=110.643 memavail=7291592 print_time=2682.303 buffer_time=2.408 print_stall=0 extruder: target=240 temp=240.0 pwm=0.500
Stats 797457.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2856483 bytes_read=761151 bytes_retransmit=9 bytes_invalid=0 send_seq=56615 receive_seq=56615 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=525 freq=119992957 heater_bed: target=80 temp=80.0 pwm=0.501 sd_pos=448507 sysload=0.27 cputime=110.719 memavail=7291368 print_time=2682.982 buffer_time=2.087 print_stall=0 extruder: target=240 temp=240.1 pwm=0.377
Stats 797458.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2861031 bytes_read=761824 bytes_retransmit=9 bytes_invalid=0 send_seq=56694 receive_seq=56694 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=2451 freq=119992946 heater_bed: target=80 temp=80.0 pwm=0.501 sd_pos=449802 sysload=0.27 cputime=110.823 memavail=7291372 print_time=2684.188 buffer_time=2.292 print_stall=0 extruder: target=240 temp=239.8 pwm=0.525
Stats 797459.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2866003 bytes_read=762542 bytes_retransmit=9 bytes_invalid=0 send_seq=56779 receive_seq=56779 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=3647 freq=119992942 heater_bed: target=80 temp=80.0 pwm=0.608 sd_pos=451010 sysload=0.24 cputime=110.934 memavail=7291372 print_time=2685.376 buffer_time=2.480 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 797460.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2871621 bytes_read=763305 bytes_retransmit=9 bytes_invalid=0 send_seq=56874 receive_seq=56874 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1616 freq=119992932 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=451551 sysload=0.24 cputime=111.034 memavail=7291372 print_time=2686.035 buffer_time=2.138 print_stall=0 extruder: target=240 temp=240.4 pwm=0.276
Stats 797461.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2877190 bytes_read=764077 bytes_retransmit=9 bytes_invalid=0 send_seq=56971 receive_seq=56971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=388 freq=119992924 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=452103 sysload=0.24 cputime=111.133 memavail=7291372 print_time=2686.946 buffer_time=2.048 print_stall=0 extruder: target=240 temp=240.2 pwm=0.406
Stats 797462.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2882050 bytes_read=764783 bytes_retransmit=9 bytes_invalid=0 send_seq=57055 receive_seq=57055 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=2487 freq=119992921 heater_bed: target=80 temp=80.0 pwm=0.523 sd_pos=453481 sysload=0.24 cputime=111.241 memavail=7291372 print_time=2688.225 buffer_time=2.327 print_stall=0 extruder: target=240 temp=240.2 pwm=0.417
Stats 797463.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2886788 bytes_read=765480 bytes_retransmit=9 bytes_invalid=0 send_seq=57136 receive_seq=57136 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=3305 freq=119992920 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=454025 sysload=0.24 cputime=111.344 memavail=7291372 print_time=2689.769 buffer_time=2.870 print_stall=0 extruder: target=240 temp=240.0 pwm=0.525
Stats 797464.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2892370 bytes_read=766238 bytes_retransmit=9 bytes_invalid=0 send_seq=57232 receive_seq=57232 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1211 freq=119992968 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=454606 sysload=0.22 cputime=111.427 memavail=7290800 print_time=2690.397 buffer_time=2.497 print_stall=0 extruder: target=240 temp=239.8 pwm=0.575
Stats 797465.4: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2896623 bytes_read=766927 bytes_retransmit=9 bytes_invalid=0 send_seq=57308 receive_seq=57308 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=274 freq=119992958 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=455190 sysload=0.22 cputime=111.508 memavail=7290864 print_time=2691.011 buffer_time=2.110 print_stall=0 extruder: target=240 temp=239.9 pwm=0.482
Stats 797466.4: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2900674 bytes_read=767574 bytes_retransmit=9 bytes_invalid=0 send_seq=57379 receive_seq=57379 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2795 freq=119992949 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=456580 sysload=0.22 cputime=111.619 memavail=7291308 print_time=2692.266 buffer_time=2.365 print_stall=0 extruder: target=240 temp=239.9 pwm=0.469
Stats 797467.4: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2905869 bytes_read=768297 bytes_retransmit=9 bytes_invalid=0 send_seq=57468 receive_seq=57468 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=762 freq=119992942 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=457005 sysload=0.22 cputime=111.712 memavail=7291148 print_time=2693.002 buffer_time=2.100 print_stall=0 extruder: target=240 temp=240.3 pwm=0.327
Stats 797468.4: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2911095 bytes_read=769045 bytes_retransmit=9 bytes_invalid=0 send_seq=57559 receive_seq=57559 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=110 freq=119992935 heater_bed: target=80 temp=80.0 pwm=0.536 sd_pos=457440 sysload=0.22 cputime=111.814 memavail=7291148 print_time=2694.187 buffer_time=2.284 print_stall=0 extruder: target=240 temp=240.3 pwm=0.353
Stats 797469.4: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2913662 bytes_read=769592 bytes_retransmit=9 bytes_invalid=0 send_seq=57610 receive_seq=57610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992925 heater_bed: target=80 temp=80.0 pwm=0.539 sd_pos=458011 sysload=0.21 cputime=111.887 memavail=7291148 print_time=2694.957 buffer_time=2.053 print_stall=0 extruder: target=240 temp=240.3 pwm=0.397
Stats 797470.4: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2915802 bytes_read=770095 bytes_retransmit=9 bytes_invalid=0 send_seq=57655 receive_seq=57655 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992917 heater_bed: target=80 temp=80.0 pwm=0.528 sd_pos=458098 sysload=0.21 cputime=111.950 memavail=7291148 print_time=2695.998 buffer_time=2.094 print_stall=0 extruder: target=240 temp=240.2 pwm=0.420
Stats 797471.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2917671 bytes_read=770599 bytes_retransmit=9 bytes_invalid=0 send_seq=57694 receive_seq=57694 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992910 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=458326 sysload=0.21 cputime=112.019 memavail=7291148 print_time=2697.375 buffer_time=2.469 print_stall=0 extruder: target=240 temp=239.7 pwm=0.602
Stats 797472.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2918958 bytes_read=771046 bytes_retransmit=9 bytes_invalid=0 send_seq=57725 receive_seq=57725 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=80.0 pwm=0.490 sd_pos=458355 sysload=0.21 cputime=112.077 memavail=7291148 print_time=2698.274 buffer_time=2.368 print_stall=0 extruder: target=240 temp=240.1 pwm=0.364
Stats 797473.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2921633 bytes_read=771589 bytes_retransmit=9 bytes_invalid=0 send_seq=57778 receive_seq=57778 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=458632 sysload=0.21 cputime=112.142 memavail=7291148 print_time=2699.397 buffer_time=2.491 print_stall=0 extruder: target=240 temp=240.1 pwm=0.463
Stats 797474.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2922974 bytes_read=772047 bytes_retransmit=9 bytes_invalid=0 send_seq=57811 receive_seq=57811 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=458747 sysload=0.19 cputime=112.205 memavail=7291148 print_time=2700.029 buffer_time=2.122 print_stall=0 extruder: target=240 temp=240.1 pwm=0.408
Stats 797475.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2924873 bytes_read=772534 bytes_retransmit=9 bytes_invalid=0 send_seq=57850 receive_seq=57850 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992885 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=458919 sysload=0.19 cputime=112.265 memavail=7291148 print_time=2700.970 buffer_time=2.062 print_stall=0 extruder: target=240 temp=239.9 pwm=0.471
Stats 797476.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2927314 bytes_read=773062 bytes_retransmit=9 bytes_invalid=0 send_seq=57897 receive_seq=57897 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992879 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=459145 sysload=0.19 cputime=112.325 memavail=7290644 print_time=2702.218 buffer_time=2.310 print_stall=0 extruder: target=240 temp=240.1 pwm=0.413
Stats 797477.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2929151 bytes_read=773545 bytes_retransmit=9 bytes_invalid=0 send_seq=57935 receive_seq=57935 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992880 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=459314 sysload=0.19 cputime=112.389 memavail=7290200 print_time=2703.150 buffer_time=2.239 print_stall=0 extruder: target=240 temp=239.6 pwm=0.629
Stats 797478.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2931108 bytes_read=774042 bytes_retransmit=9 bytes_invalid=0 send_seq=57976 receive_seq=57976 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=79.9 pwm=0.579 sd_pos=459485 sysload=0.19 cputime=112.445 memavail=7290200 print_time=2704.091 buffer_time=2.180 print_stall=0 extruder: target=240 temp=240.0 pwm=0.477
Stats 797479.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2933024 bytes_read=774525 bytes_retransmit=9 bytes_invalid=0 send_seq=58017 receive_seq=58017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=80.0 pwm=0.525 sd_pos=459653 sysload=0.17 cputime=112.510 memavail=7290200 print_time=2705.023 buffer_time=2.110 print_stall=0 extruder: target=240 temp=239.6 pwm=0.536
Stats 797480.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2934973 bytes_read=775018 bytes_retransmit=9 bytes_invalid=0 send_seq=58057 receive_seq=58057 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=459824 sysload=0.17 cputime=112.579 memavail=7290200 print_time=2705.964 buffer_time=2.050 print_stall=0 extruder: target=240 temp=239.5 pwm=0.531
Stats 797481.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2937554 bytes_read=775580 bytes_retransmit=9 bytes_invalid=0 send_seq=58108 receive_seq=58108 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992862 heater_bed: target=80 temp=80.0 pwm=0.331 sd_pos=460067 sysload=0.17 cputime=112.652 memavail=7292492 print_time=2707.212 buffer_time=2.297 print_stall=0 extruder: target=240 temp=239.5 pwm=0.503
Stats 797482.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2940246 bytes_read=776128 bytes_retransmit=9 bytes_invalid=0 send_seq=58162 receive_seq=58162 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992868 heater_bed: target=80 temp=80.0 pwm=0.386 sd_pos=460334 sysload=0.17 cputime=112.716 memavail=7290668 print_time=2708.335 buffer_time=2.419 print_stall=0 extruder: target=240 temp=239.4 pwm=0.583
Stats 797483.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2943475 bytes_read=776726 bytes_retransmit=9 bytes_invalid=0 send_seq=58223 receive_seq=58223 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=460623 sysload=0.17 cputime=112.777 memavail=7293812 print_time=2709.219 buffer_time=2.302 print_stall=0 extruder: target=240 temp=239.3 pwm=0.623
Stats 797484.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2946267 bytes_read=777288 bytes_retransmit=9 bytes_invalid=0 send_seq=58277 receive_seq=58277 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=460892 sysload=0.16 cputime=112.848 memavail=7292980 print_time=2710.006 buffer_time=2.088 print_stall=0 extruder: target=240 temp=239.5 pwm=0.551
Stats 797485.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2948008 bytes_read=777751 bytes_retransmit=9 bytes_invalid=0 send_seq=58314 receive_seq=58314 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992858 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=460922 sysload=0.16 cputime=112.902 memavail=7293176 print_time=2711.050 buffer_time=2.130 print_stall=0 extruder: target=240 temp=239.5 pwm=0.536
Stats 797486.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2949487 bytes_read=778220 bytes_retransmit=9 bytes_invalid=0 send_seq=58346 receive_seq=58346 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=461143 sysload=0.16 cputime=112.961 memavail=7291060 print_time=2712.364 buffer_time=2.444 print_stall=0 extruder: target=240 temp=239.2 pwm=0.683
Stats 797487.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2951571 bytes_read=778737 bytes_retransmit=9 bytes_invalid=0 send_seq=58391 receive_seq=58391 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.497 sd_pos=461477 sysload=0.16 cputime=113.029 memavail=7291536 print_time=2713.172 buffer_time=2.251 print_stall=0 extruder: target=240 temp=239.5 pwm=0.562
Stats 797488.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2952370 bytes_read=779125 bytes_retransmit=9 bytes_invalid=0 send_seq=58413 receive_seq=58413 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=461536 sysload=0.16 cputime=113.090 memavail=7291028 print_time=2714.040 buffer_time=2.118 print_stall=0 extruder: target=240 temp=239.7 pwm=0.493
Stats 797489.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2953250 bytes_read=779528 bytes_retransmit=9 bytes_invalid=0 send_seq=58435 receive_seq=58435 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992842 heater_bed: target=80 temp=80.0 pwm=0.528 sd_pos=461595 sysload=0.15 cputime=113.145 memavail=7291192 print_time=2714.949 buffer_time=2.026 print_stall=0 extruder: target=240 temp=239.8 pwm=0.493
Stats 797490.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=2954694 bytes_read=779995 bytes_retransmit=9 bytes_invalid=0 send_seq=58470 receive_seq=58470 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=80.0 pwm=0.490 sd_pos=461818 sysload=0.15 cputime=113.202 memavail=7291064 print_time=2716.072 buffer_time=2.149 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 797491.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2957204 bytes_read=780538 bytes_retransmit=9 bytes_invalid=0 send_seq=58520 receive_seq=58520 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992841 heater_bed: target=80 temp=80.0 pwm=0.370 sd_pos=462139 sysload=0.15 cputime=113.263 memavail=7292880 print_time=2717.190 buffer_time=2.266 print_stall=0 extruder: target=240 temp=240.4 pwm=0.339
Stats 797492.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2959538 bytes_read=781071 bytes_retransmit=9 bytes_invalid=0 send_seq=58568 receive_seq=58568 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.0 pwm=0.587 sd_pos=462668 sysload=0.15 cputime=113.351 memavail=7291032 print_time=2718.332 buffer_time=2.408 print_stall=0 extruder: target=240 temp=240.4 pwm=0.383
Stats 797493.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2961838 bytes_read=781603 bytes_retransmit=9 bytes_invalid=0 send_seq=58616 receive_seq=58616 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=463221 sysload=0.15 cputime=113.422 memavail=7289620 print_time=2719.544 buffer_time=2.619 print_stall=0 extruder: target=240 temp=239.9 pwm=0.596
Stats 797494.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2962879 bytes_read=782016 bytes_retransmit=9 bytes_invalid=0 send_seq=58643 receive_seq=58643 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.391 sd_pos=463365 sysload=0.13 cputime=113.484 memavail=7290300 print_time=2720.039 buffer_time=2.113 print_stall=0 extruder: target=240 temp=240.2 pwm=0.434
Stats 797495.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=2966022 bytes_read=782609 bytes_retransmit=9 bytes_invalid=0 send_seq=58703 receive_seq=58703 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992869 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=463911 sysload=0.13 cputime=113.563 memavail=7292428 print_time=2721.033 buffer_time=2.105 print_stall=0 extruder: target=240 temp=240.1 pwm=0.493
Stats 797496.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2972046 bytes_read=783457 bytes_retransmit=9 bytes_invalid=0 send_seq=58812 receive_seq=58812 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=382 freq=119992868 heater_bed: target=80 temp=80.0 pwm=0.503 sd_pos=464795 sysload=0.13 cputime=113.627 memavail=7292572 print_time=2722.285 buffer_time=2.357 print_stall=0 extruder: target=240 temp=240.3 pwm=0.425
Stats 797497.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2974901 bytes_read=783988 bytes_retransmit=9 bytes_invalid=0 send_seq=58864 receive_seq=58864 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=3706 freq=119992861 heater_bed: target=80 temp=80.0 pwm=0.539 sd_pos=465777 sysload=0.13 cputime=113.708 memavail=7293072 print_time=2723.534 buffer_time=2.604 print_stall=0 extruder: target=240 temp=240.1 pwm=0.527
Stats 797498.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2980132 bytes_read=784726 bytes_retransmit=9 bytes_invalid=0 send_seq=58954 receive_seq=58954 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=2296 freq=119992855 heater_bed: target=80 temp=80.0 pwm=0.539 sd_pos=466793 sysload=0.13 cputime=113.776 memavail=7292624 print_time=2724.366 buffer_time=2.435 print_stall=0 extruder: target=240 temp=240.2 pwm=0.504
Stats 797499.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2985298 bytes_read=785458 bytes_retransmit=9 bytes_invalid=0 send_seq=59042 receive_seq=59042 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 upcoming_bytes=0 freq=119992853 heater_bed: target=80 temp=79.9 pwm=0.539 sd_pos=467176 sysload=0.12 cputime=113.846 memavail=7290108 print_time=2725.063 buffer_time=2.131 print_stall=0 extruder: target=240 temp=240.3 pwm=0.465
Stats 797500.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=2988769 bytes_read=786056 bytes_retransmit=9 bytes_invalid=0 send_seq=59106 receive_seq=59106 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=79.9 pwm=0.566 sd_pos=467490 sysload=0.12 cputime=113.895 memavail=7291232 print_time=2726.150 buffer_time=2.219 print_stall=0 extruder: target=240 temp=240.4 pwm=0.465
Stats 797501.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2990738 bytes_read=786565 bytes_retransmit=9 bytes_invalid=0 send_seq=59146 receive_seq=59146 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=80.0 pwm=0.382 sd_pos=467689 sysload=0.12 cputime=113.940 memavail=7292092 print_time=2727.126 buffer_time=2.194 print_stall=0 extruder: target=240 temp=240.4 pwm=0.465
Stats 797502.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2992661 bytes_read=787067 bytes_retransmit=9 bytes_invalid=0 send_seq=59188 receive_seq=59188 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=80.0 pwm=0.385 sd_pos=467884 sysload=0.12 cputime=113.998 memavail=7290732 print_time=2728.220 buffer_time=2.287 print_stall=0 extruder: target=240 temp=240.4 pwm=0.397
Stats 797503.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2994531 bytes_read=787545 bytes_retransmit=9 bytes_invalid=0 send_seq=59228 receive_seq=59228 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992854 heater_bed: target=80 temp=80.0 pwm=0.433 sd_pos=468079 sysload=0.12 cputime=114.050 memavail=7292776 print_time=2729.087 buffer_time=2.152 print_stall=0 extruder: target=240 temp=240.4 pwm=0.387
Stats 797504.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=2996887 bytes_read=788068 bytes_retransmit=9 bytes_invalid=0 send_seq=59274 receive_seq=59274 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992860 heater_bed: target=80 temp=80.0 pwm=0.507 sd_pos=468385 sysload=0.19 cputime=114.102 memavail=7295024 print_time=2730.000 buffer_time=2.064 print_stall=0 extruder: target=240 temp=240.3 pwm=0.464
Stats 797505.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3003649 bytes_read=788965 bytes_retransmit=9 bytes_invalid=0 send_seq=59395 receive_seq=59395 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=436 freq=119992860 heater_bed: target=80 temp=80.0 pwm=0.507 sd_pos=469300 sysload=0.19 cputime=114.169 memavail=7293516 print_time=2731.578 buffer_time=2.642 print_stall=0 extruder: target=240 temp=240.0 pwm=0.515
Stats 797506.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3005973 bytes_read=789489 bytes_retransmit=9 bytes_invalid=0 send_seq=59441 receive_seq=59441 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=2147 freq=119992857 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=469867 sysload=0.19 cputime=114.231 memavail=7291600 print_time=2732.274 buffer_time=2.338 print_stall=0 extruder: target=240 temp=239.6 pwm=0.645
Stats 797507.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3010136 bytes_read=790152 bytes_retransmit=9 bytes_invalid=0 send_seq=59515 receive_seq=59515 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=4035 freq=119992857 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=470807 sysload=0.19 cputime=114.330 memavail=7291156 print_time=2733.491 buffer_time=2.553 print_stall=0 extruder: target=240 temp=239.7 pwm=0.587
Stats 797508.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3015898 bytes_read=790929 bytes_retransmit=9 bytes_invalid=0 send_seq=59612 receive_seq=59612 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=1874 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=471267 sysload=0.19 cputime=114.422 memavail=7293464 print_time=2734.133 buffer_time=2.195 print_stall=0 extruder: target=240 temp=239.6 pwm=0.517
Stats 797509.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3021485 bytes_read=791687 bytes_retransmit=9 bytes_invalid=0 send_seq=59708 receive_seq=59708 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=1063 freq=119992857 heater_bed: target=80 temp=80.0 pwm=0.483 sd_pos=471731 sysload=0.34 cputime=114.513 memavail=7292040 print_time=2735.184 buffer_time=2.246 print_stall=0 extruder: target=240 temp=239.8 pwm=0.449
Stats 797510.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3026111 bytes_read=792380 bytes_retransmit=9 bytes_invalid=0 send_seq=59788 receive_seq=59788 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992852 heater_bed: target=80 temp=79.9 pwm=0.540 sd_pos=472097 sysload=0.34 cputime=114.594 memavail=7293608 print_time=2736.226 buffer_time=2.287 print_stall=0 extruder: target=240 temp=240.0 pwm=0.420
Stats 797511.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3028047 bytes_read=792898 bytes_retransmit=9 bytes_invalid=0 send_seq=59830 receive_seq=59830 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119992850 heater_bed: target=80 temp=79.9 pwm=0.562 sd_pos=472324 sysload=0.34 cputime=114.653 memavail=7293356 print_time=2737.245 buffer_time=2.305 print_stall=0 extruder: target=240 temp=240.1 pwm=0.405
Stats 797512.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3030231 bytes_read=793401 bytes_retransmit=9 bytes_invalid=0 send_seq=59875 receive_seq=59875 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=79.9 pwm=0.623 sd_pos=472610 sysload=0.34 cputime=114.710 memavail=7293356 print_time=2738.391 buffer_time=2.452 print_stall=0 extruder: target=240 temp=240.3 pwm=0.417
Stats 797513.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3031203 bytes_read=793809 bytes_retransmit=9 bytes_invalid=0 send_seq=59898 receive_seq=59898 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=79.9 pwm=0.623 sd_pos=472734 sysload=0.34 cputime=114.757 memavail=7293356 print_time=2738.948 buffer_time=2.008 print_stall=0 extruder: target=240 temp=239.9 pwm=0.567
Stats 797514.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3034686 bytes_read=794441 bytes_retransmit=9 bytes_invalid=0 send_seq=59966 receive_seq=59966 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992885 heater_bed: target=80 temp=79.9 pwm=0.554 sd_pos=473245 sysload=0.31 cputime=114.820 memavail=7293356 print_time=2740.212 buffer_time=2.271 print_stall=0 extruder: target=240 temp=239.7 pwm=0.556
Stats 797515.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3038479 bytes_read=795084 bytes_retransmit=9 bytes_invalid=0 send_seq=60039 receive_seq=60039 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992880 heater_bed: target=80 temp=79.8 pwm=0.494 sd_pos=474173 sysload=0.31 cputime=114.881 memavail=7293356 print_time=2741.004 buffer_time=2.063 print_stall=0 extruder: target=240 temp=239.9 pwm=0.409
Stats 797516.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3041085 bytes_read=795648 bytes_retransmit=9 bytes_invalid=0 send_seq=60090 receive_seq=60090 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992877 heater_bed: target=80 temp=79.8 pwm=0.491 sd_pos=474368 sysload=0.31 cputime=114.938 memavail=7292348 print_time=2742.243 buffer_time=2.300 print_stall=0 extruder: target=240 temp=239.8 pwm=0.479
Stats 797517.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3042082 bytes_read=796070 bytes_retransmit=9 bytes_invalid=0 send_seq=60116 receive_seq=60116 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=79.8 pwm=0.541 sd_pos=474427 sysload=0.31 cputime=114.992 memavail=7292348 print_time=2743.016 buffer_time=2.073 print_stall=0 extruder: target=240 temp=239.8 pwm=0.475
Stats 797518.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3044143 bytes_read=796563 bytes_retransmit=9 bytes_invalid=0 send_seq=60159 receive_seq=60159 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992898 heater_bed: target=80 temp=79.9 pwm=0.448 sd_pos=474624 sysload=0.31 cputime=115.053 memavail=7292348 print_time=2744.151 buffer_time=2.206 print_stall=0 extruder: target=240 temp=239.5 pwm=0.644
Stats 797519.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3045581 bytes_read=797037 bytes_retransmit=9 bytes_invalid=0 send_seq=60193 receive_seq=60193 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992889 heater_bed: target=80 temp=79.8 pwm=0.543 sd_pos=474682 sysload=0.29 cputime=115.110 memavail=7292348 print_time=2745.257 buffer_time=2.312 print_stall=0 extruder: target=240 temp=239.8 pwm=0.533
Stats 797520.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3048261 bytes_read=797604 bytes_retransmit=9 bytes_invalid=0 send_seq=60248 receive_seq=60248 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992883 heater_bed: target=80 temp=79.9 pwm=0.544 sd_pos=475153 sysload=0.29 cputime=115.166 memavail=7292348 print_time=2746.091 buffer_time=2.145 print_stall=0 extruder: target=240 temp=239.8 pwm=0.532
Stats 797521.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3054458 bytes_read=798447 bytes_retransmit=9 bytes_invalid=0 send_seq=60358 receive_seq=60358 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=194 freq=119992887 heater_bed: target=80 temp=79.9 pwm=0.417 sd_pos=475832 sysload=0.29 cputime=115.241 memavail=7292348 print_time=2747.359 buffer_time=2.412 print_stall=0 extruder: target=240 temp=239.8 pwm=0.592
Stats 797522.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3057233 bytes_read=799010 bytes_retransmit=9 bytes_invalid=0 send_seq=60412 receive_seq=60412 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=289 freq=119992885 heater_bed: target=80 temp=79.9 pwm=0.518 sd_pos=476281 sysload=0.29 cputime=115.323 memavail=7292348 print_time=2747.993 buffer_time=2.046 print_stall=0 extruder: target=240 temp=240.0 pwm=0.495
Stats 797523.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3062091 bytes_read=799717 bytes_retransmit=9 bytes_invalid=0 send_seq=60495 receive_seq=60495 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=987 freq=119992881 heater_bed: target=80 temp=79.9 pwm=0.449 sd_pos=476600 sysload=0.29 cputime=115.429 memavail=7292348 print_time=2749.243 buffer_time=2.295 print_stall=0 extruder: target=240 temp=240.1 pwm=0.489
Stats 797524.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3066309 bytes_read=800365 bytes_retransmit=9 bytes_invalid=0 send_seq=60569 receive_seq=60569 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992880 heater_bed: target=80 temp=79.9 pwm=0.468 sd_pos=476789 sysload=0.26 cputime=115.518 memavail=7291592 print_time=2749.876 buffer_time=1.927 print_stall=0 extruder: target=240 temp=240.4 pwm=0.392
Stats 797525.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3071204 bytes_read=801083 bytes_retransmit=9 bytes_invalid=0 send_seq=60654 receive_seq=60654 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1038 freq=119992877 heater_bed: target=80 temp=79.9 pwm=0.468 sd_pos=477091 sysload=0.26 cputime=115.616 memavail=7291304 print_time=2751.125 buffer_time=2.176 print_stall=0 extruder: target=240 temp=240.3 pwm=0.463
Stats 797526.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3075818 bytes_read=801796 bytes_retransmit=9 bytes_invalid=0 send_seq=60735 receive_seq=60735 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=2764 freq=119992904 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=477750 sysload=0.26 cputime=115.723 memavail=7290548 print_time=2752.513 buffer_time=2.563 print_stall=0 extruder: target=240 temp=240.1 pwm=0.463
Stats 797527.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3080676 bytes_read=802499 bytes_retransmit=9 bytes_invalid=0 send_seq=60820 receive_seq=60820 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=989 freq=119992905 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=478010 sysload=0.26 cputime=115.823 memavail=7290560 print_time=2753.076 buffer_time=2.125 print_stall=0 extruder: target=240 temp=240.1 pwm=0.504
Stats 797528.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3085053 bytes_read=803177 bytes_retransmit=9 bytes_invalid=0 send_seq=60897 receive_seq=60897 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992899 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=478246 sysload=0.26 cputime=115.912 memavail=7290560 print_time=2754.569 buffer_time=2.617 print_stall=0 extruder: target=240 temp=240.4 pwm=0.321
Stats 797529.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3085774 bytes_read=803574 bytes_retransmit=9 bytes_invalid=0 send_seq=60918 receive_seq=60918 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=478276 sysload=0.32 cputime=115.968 memavail=7290560 print_time=2755.036 buffer_time=2.083 print_stall=0 extruder: target=240 temp=240.2 pwm=0.500
Stats 797530.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3087090 bytes_read=804002 bytes_retransmit=9 bytes_invalid=0 send_seq=60948 receive_seq=60948 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992917 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=478441 sysload=0.32 cputime=116.027 memavail=7290560 print_time=2756.087 buffer_time=2.134 print_stall=0 extruder: target=240 temp=240.3 pwm=0.422
Stats 797531.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3089800 bytes_read=804586 bytes_retransmit=9 bytes_invalid=0 send_seq=61003 receive_seq=61003 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992909 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=478862 sysload=0.32 cputime=116.103 memavail=7290560 print_time=2757.750 buffer_time=2.796 print_stall=0 extruder: target=240 temp=240.1 pwm=0.486
Stats 797532.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3090631 bytes_read=805001 bytes_retransmit=9 bytes_invalid=0 send_seq=61029 receive_seq=61029 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=478862 sysload=0.32 cputime=116.163 memavail=7290560 print_time=2758.072 buffer_time=2.117 print_stall=0 extruder: target=240 temp=240.1 pwm=0.459
Stats 797533.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3091563 bytes_read=805397 bytes_retransmit=9 bytes_invalid=0 send_seq=61054 receive_seq=61054 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992893 heater_bed: target=80 temp=80.1 pwm=0.269 sd_pos=479006 sysload=0.32 cputime=116.227 memavail=7290560 print_time=2759.553 buffer_time=2.597 print_stall=0 extruder: target=240 temp=240.1 pwm=0.423
Stats 797534.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3093066 bytes_read=805862 bytes_retransmit=9 bytes_invalid=0 send_seq=61089 receive_seq=61089 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992883 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=479380 sysload=0.30 cputime=116.303 memavail=7290560 print_time=2760.352 buffer_time=2.396 print_stall=0 extruder: target=240 temp=240.3 pwm=0.325
Stats 797535.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3095630 bytes_read=806409 bytes_retransmit=9 bytes_invalid=0 send_seq=61140 receive_seq=61140 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=10 freq=119992936 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=479663 sysload=0.30 cputime=116.373 memavail=7290560 print_time=2761.173 buffer_time=2.217 print_stall=0 extruder: target=240 temp=240.1 pwm=0.454
Stats 797536.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3097302 bytes_read=806882 bytes_retransmit=9 bytes_invalid=0 send_seq=61176 receive_seq=61176 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992937 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=480109 sysload=0.30 cputime=116.449 memavail=7290308 print_time=2762.003 buffer_time=2.046 print_stall=0 extruder: target=240 temp=240.2 pwm=0.464
Stats 797537.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3099515 bytes_read=807414 bytes_retransmit=9 bytes_invalid=0 send_seq=61221 receive_seq=61221 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992927 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=480635 sysload=0.30 cputime=116.533 memavail=7290312 print_time=2763.212 buffer_time=2.254 print_stall=0 extruder: target=240 temp=240.3 pwm=0.401
Stats 797538.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3102552 bytes_read=807987 bytes_retransmit=9 bytes_invalid=0 send_seq=61280 receive_seq=61280 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992928 heater_bed: target=80 temp=80.1 pwm=0.461 sd_pos=481151 sysload=0.30 cputime=116.603 memavail=7290312 print_time=2764.470 buffer_time=2.511 print_stall=0 extruder: target=240 temp=240.1 pwm=0.428
Stats 797539.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3105764 bytes_read=808575 bytes_retransmit=9 bytes_invalid=0 send_seq=61342 receive_seq=61342 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992958 heater_bed: target=80 temp=80.1 pwm=0.453 sd_pos=481811 sysload=0.27 cputime=116.674 memavail=7290312 print_time=2765.211 buffer_time=2.251 print_stall=0 extruder: target=240 temp=240.0 pwm=0.490
Stats 797540.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3110229 bytes_read=809302 bytes_retransmit=9 bytes_invalid=0 send_seq=61426 receive_seq=61426 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=834 freq=119992957 heater_bed: target=80 temp=80.1 pwm=0.391 sd_pos=482500 sysload=0.27 cputime=116.761 memavail=7290312 print_time=2766.498 buffer_time=2.538 print_stall=0 extruder: target=240 temp=240.1 pwm=0.388
Stats 797541.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3113776 bytes_read=809921 bytes_retransmit=9 bytes_invalid=0 send_seq=61491 receive_seq=61491 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992951 heater_bed: target=80 temp=80.1 pwm=0.494 sd_pos=482670 sysload=0.27 cputime=116.848 memavail=7290312 print_time=2767.062 buffer_time=2.101 print_stall=0 extruder: target=240 temp=239.9 pwm=0.444
Stats 797542.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3118429 bytes_read=810609 bytes_retransmit=9 bytes_invalid=0 send_seq=61573 receive_seq=61573 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=2787 freq=119992942 heater_bed: target=80 temp=80.1 pwm=0.479 sd_pos=483537 sysload=0.27 cputime=116.957 memavail=7290312 print_time=2768.732 buffer_time=2.770 print_stall=0 extruder: target=240 temp=240.2 pwm=0.355
Stats 797543.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3122860 bytes_read=811306 bytes_retransmit=9 bytes_invalid=0 send_seq=61651 receive_seq=61651 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1819 freq=119992939 heater_bed: target=80 temp=80.1 pwm=0.508 sd_pos=484074 sysload=0.27 cputime=117.053 memavail=7290316 print_time=2769.360 buffer_time=2.396 print_stall=0 extruder: target=240 temp=240.2 pwm=0.406
Stats 797544.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3127542 bytes_read=811994 bytes_retransmit=9 bytes_invalid=0 send_seq=61733 receive_seq=61733 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=897 freq=119992930 heater_bed: target=80 temp=80.1 pwm=0.508 sd_pos=484641 sysload=0.25 cputime=117.147 memavail=7290316 print_time=2770.002 buffer_time=2.038 print_stall=0 extruder: target=240 temp=240.1 pwm=0.406
Stats 797545.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3132128 bytes_read=812667 bytes_retransmit=9 bytes_invalid=0 send_seq=61812 receive_seq=61812 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=2540 freq=119992924 heater_bed: target=80 temp=80.0 pwm=0.529 sd_pos=485961 sysload=0.25 cputime=117.251 memavail=7290316 print_time=2771.165 buffer_time=2.200 print_stall=0 extruder: target=240 temp=240.1 pwm=0.429
Stats 797546.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3137802 bytes_read=813475 bytes_retransmit=9 bytes_invalid=0 send_seq=61909 receive_seq=61909 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=3480 freq=119992920 heater_bed: target=80 temp=80.1 pwm=0.450 sd_pos=487050 sysload=0.25 cputime=117.374 memavail=7290316 print_time=2772.486 buffer_time=2.521 print_stall=0 extruder: target=240 temp=239.8 pwm=0.528
Stats 797547.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3143237 bytes_read=814218 bytes_retransmit=9 bytes_invalid=0 send_seq=62002 receive_seq=62002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1633 freq=119992917 heater_bed: target=80 temp=80.0 pwm=0.508 sd_pos=487501 sysload=0.25 cputime=117.483 memavail=7290316 print_time=2773.232 buffer_time=2.266 print_stall=0 extruder: target=240 temp=239.8 pwm=0.534
Stats 797548.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3148961 bytes_read=814991 bytes_retransmit=9 bytes_invalid=0 send_seq=62101 receive_seq=62101 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=751 freq=119992920 heater_bed: target=80 temp=80.0 pwm=0.512 sd_pos=488092 sysload=0.25 cputime=117.597 memavail=7290316 print_time=2774.436 buffer_time=2.469 print_stall=0 extruder: target=240 temp=240.0 pwm=0.404
Stats 797549.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3153181 bytes_read=815673 bytes_retransmit=9 bytes_invalid=0 send_seq=62176 receive_seq=62176 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=156 freq=119992912 heater_bed: target=80 temp=80.1 pwm=0.428 sd_pos=488316 sysload=0.23 cputime=117.676 memavail=7290316 print_time=2775.369 buffer_time=2.402 print_stall=0 extruder: target=240 temp=240.2 pwm=0.344
Stats 797550.4: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3157408 bytes_read=816342 bytes_retransmit=9 bytes_invalid=0 send_seq=62251 receive_seq=62251 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=2596 freq=119992907 heater_bed: target=80 temp=80.0 pwm=0.501 sd_pos=488897 sysload=0.23 cputime=117.753 memavail=7290316 print_time=2776.834 buffer_time=2.858 print_stall=0 extruder: target=240 temp=240.1 pwm=0.421
Stats 797551.4: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3161259 bytes_read=816965 bytes_retransmit=9 bytes_invalid=0 send_seq=62320 receive_seq=62320 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2327 freq=119992895 heater_bed: target=80 temp=80.0 pwm=0.501 sd_pos=489450 sysload=0.23 cputime=117.832 memavail=7290316 print_time=2777.555 buffer_time=2.579 print_stall=0 extruder: target=240 temp=240.1 pwm=0.478
Stats 797552.4: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3165756 bytes_read=817662 bytes_retransmit=9 bytes_invalid=0 send_seq=62398 receive_seq=62398 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1186 freq=119992891 heater_bed: target=80 temp=80.0 pwm=0.501 sd_pos=489889 sysload=0.23 cputime=117.932 memavail=7290316 print_time=2778.190 buffer_time=2.213 print_stall=0 extruder: target=240 temp=240.2 pwm=0.421
Stats 797553.4: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3170205 bytes_read=818320 bytes_retransmit=9 bytes_invalid=0 send_seq=62474 receive_seq=62474 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=542 freq=119992892 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=490478 sysload=0.23 cputime=118.029 memavail=7290316 print_time=2779.004 buffer_time=2.026 print_stall=0 extruder: target=240 temp=240.1 pwm=0.452
Stats 797554.4: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3175587 bytes_read=819068 bytes_retransmit=9 bytes_invalid=0 send_seq=62565 receive_seq=62565 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=1614 freq=119992890 heater_bed: target=80 temp=80.0 pwm=0.510 sd_pos=492041 sysload=0.21 cputime=118.153 memavail=7290464 print_time=2780.186 buffer_time=2.208 print_stall=0 extruder: target=240 temp=240.1 pwm=0.425
Stats 797555.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3180125 bytes_read=819771 bytes_retransmit=9 bytes_invalid=0 send_seq=62644 receive_seq=62644 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=341 freq=119992884 heater_bed: target=80 temp=80.0 pwm=0.517 sd_pos=492436 sysload=0.21 cputime=118.255 memavail=7290544 print_time=2781.505 buffer_time=2.526 print_stall=0 extruder: target=240 temp=240.1 pwm=0.455
Stats 797556.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3181462 bytes_read=820194 bytes_retransmit=9 bytes_invalid=0 send_seq=62673 receive_seq=62673 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992886 heater_bed: target=80 temp=80.0 pwm=0.500 sd_pos=492495 sysload=0.21 cputime=118.307 memavail=7290292 print_time=2782.278 buffer_time=2.299 print_stall=0 extruder: target=240 temp=240.0 pwm=0.455
Stats 797557.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3183180 bytes_read=820667 bytes_retransmit=9 bytes_invalid=0 send_seq=62709 receive_seq=62709 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992886 heater_bed: target=80 temp=80.0 pwm=0.500 sd_pos=492663 sysload=0.21 cputime=118.363 memavail=7290292 print_time=2783.198 buffer_time=2.218 print_stall=0 extruder: target=240 temp=240.1 pwm=0.455
Stats 797558.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3184488 bytes_read=821114 bytes_retransmit=9 bytes_invalid=0 send_seq=62740 receive_seq=62740 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992880 heater_bed: target=80 temp=80.0 pwm=0.522 sd_pos=492692 sysload=0.21 cputime=118.412 memavail=7290292 print_time=2784.097 buffer_time=2.117 print_stall=0 extruder: target=240 temp=239.9 pwm=0.524
Stats 797559.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3187254 bytes_read=821672 bytes_retransmit=9 bytes_invalid=0 send_seq=62796 receive_seq=62796 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=492929 sysload=0.19 cputime=118.473 memavail=7290292 print_time=2785.250 buffer_time=2.269 print_stall=0 extruder: target=240 temp=240.2 pwm=0.381
Stats 797560.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3192738 bytes_read=822481 bytes_retransmit=9 bytes_invalid=0 send_seq=62896 receive_seq=62896 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992873 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=493685 sysload=0.19 cputime=118.543 memavail=7290296 print_time=2786.540 buffer_time=2.559 print_stall=0 extruder: target=240 temp=240.2 pwm=0.431
Stats 797561.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3195424 bytes_read=823033 bytes_retransmit=9 bytes_invalid=0 send_seq=62948 receive_seq=62948 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992894 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=493859 sysload=0.19 cputime=118.606 memavail=7290296 print_time=2787.158 buffer_time=2.176 print_stall=0 extruder: target=240 temp=240.1 pwm=0.424
Stats 797562.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3199776 bytes_read=823691 bytes_retransmit=9 bytes_invalid=0 send_seq=63024 receive_seq=63024 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=1174 freq=119992884 heater_bed: target=80 temp=80.1 pwm=0.357 sd_pos=494187 sysload=0.19 cputime=118.685 memavail=7290296 print_time=2788.408 buffer_time=2.425 print_stall=0 extruder: target=240 temp=240.0 pwm=0.448
Stats 797563.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3204023 bytes_read=824359 bytes_retransmit=9 bytes_invalid=0 send_seq=63099 receive_seq=63099 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=123 freq=119992885 heater_bed: target=80 temp=80.1 pwm=0.499 sd_pos=494342 sysload=0.19 cputime=118.769 memavail=7290296 print_time=2789.040 buffer_time=2.057 print_stall=0 extruder: target=240 temp=240.0 pwm=0.448
Stats 797564.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3208361 bytes_read=825036 bytes_retransmit=9 bytes_invalid=0 send_seq=63176 receive_seq=63176 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1615 freq=119992878 heater_bed: target=80 temp=80.1 pwm=0.427 sd_pos=494666 sysload=0.18 cputime=118.864 memavail=7290296 print_time=2790.291 buffer_time=2.307 print_stall=0 extruder: target=240 temp=239.9 pwm=0.480
Stats 797565.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3213104 bytes_read=825714 bytes_retransmit=9 bytes_invalid=0 send_seq=63257 receive_seq=63256 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3422 freq=119992873 heater_bed: target=80 temp=80.1 pwm=0.427 sd_pos=495067 sysload=0.18 cputime=118.957 memavail=7290296 print_time=2791.530 buffer_time=2.546 print_stall=0 extruder: target=240 temp=240.1 pwm=0.407
Stats 797566.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3217961 bytes_read=826448 bytes_retransmit=9 bytes_invalid=0 send_seq=63341 receive_seq=63341 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1937 freq=119992914 heater_bed: target=80 temp=80.1 pwm=0.471 sd_pos=495438 sysload=0.18 cputime=119.051 memavail=7290300 print_time=2792.072 buffer_time=2.087 print_stall=0 extruder: target=240 temp=240.1 pwm=0.341
Stats 797567.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3223096 bytes_read=827173 bytes_retransmit=9 bytes_invalid=0 send_seq=63428 receive_seq=63428 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992910 heater_bed: target=80 temp=80.1 pwm=0.420 sd_pos=495659 sysload=0.18 cputime=119.144 memavail=7290300 print_time=2793.487 buffer_time=2.502 print_stall=0 extruder: target=240 temp=239.9 pwm=0.499
Stats 797568.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3224830 bytes_read=827634 bytes_retransmit=9 bytes_invalid=0 send_seq=63466 receive_seq=63466 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=80.1 pwm=0.370 sd_pos=495826 sysload=0.18 cputime=119.194 memavail=7290300 print_time=2794.982 buffer_time=2.997 print_stall=0 extruder: target=240 temp=240.0 pwm=0.441
Stats 797569.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3225880 bytes_read=827994 bytes_retransmit=9 bytes_invalid=0 send_seq=63492 receive_seq=63481 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992894 heater_bed: target=80 temp=80.1 pwm=0.443 sd_pos=496048 sysload=0.16 cputime=119.267 memavail=7291652 print_time=2795.551 buffer_time=2.566 print_stall=0 extruder: target=240 temp=239.8 pwm=0.515
Stats 797570.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3227803 bytes_read=828544 bytes_retransmit=9 bytes_invalid=0 send_seq=63533 receive_seq=63533 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992887 heater_bed: target=80 temp=80.1 pwm=0.443 sd_pos=496219 sysload=0.16 cputime=119.320 memavail=7291788 print_time=2796.678 buffer_time=2.693 print_stall=0 extruder: target=240 temp=239.9 pwm=0.472
Stats 797571.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3228604 bytes_read=828958 bytes_retransmit=9 bytes_invalid=0 send_seq=63557 receive_seq=63557 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992887 heater_bed: target=80 temp=80.1 pwm=0.467 sd_pos=496219 sysload=0.16 cputime=119.378 memavail=7291788 print_time=2797.001 buffer_time=2.014 print_stall=0 extruder: target=240 temp=239.8 pwm=0.535
Stats 797572.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3229477 bytes_read=829366 bytes_retransmit=9 bytes_invalid=0 send_seq=63580 receive_seq=63580 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.1 pwm=0.467 sd_pos=496363 sysload=0.16 cputime=119.439 memavail=7291788 print_time=2798.481 buffer_time=2.495 print_stall=0 extruder: target=240 temp=240.1 pwm=0.378
Stats 797573.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3232856 bytes_read=829983 bytes_retransmit=9 bytes_invalid=0 send_seq=63645 receive_seq=63645 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992875 heater_bed: target=80 temp=80.1 pwm=0.383 sd_pos=496767 sysload=0.16 cputime=119.489 memavail=7291788 print_time=2799.862 buffer_time=2.875 print_stall=0 extruder: target=240 temp=239.7 pwm=0.584
Stats 797574.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3233494 bytes_read=830366 bytes_retransmit=9 bytes_invalid=0 send_seq=63666 receive_seq=63666 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992866 heater_bed: target=80 temp=80.1 pwm=0.514 sd_pos=496850 sysload=0.15 cputime=119.534 memavail=7291788 print_time=2800.112 buffer_time=2.124 print_stall=0 extruder: target=240 temp=239.7 pwm=0.524
Stats 797575.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3236108 bytes_read=830909 bytes_retransmit=9 bytes_invalid=0 send_seq=63716 receive_seq=63716 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992860 heater_bed: target=80 temp=80.1 pwm=0.311 sd_pos=497652 sysload=0.15 cputime=119.608 memavail=7291564 print_time=2801.359 buffer_time=2.371 print_stall=0 extruder: target=240 temp=239.8 pwm=0.469
Stats 797576.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3237442 bytes_read=831376 bytes_retransmit=9 bytes_invalid=0 send_seq=63748 receive_seq=63748 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=80.2 pwm=0.327 sd_pos=497848 sysload=0.15 cputime=119.669 memavail=7291564 print_time=2802.156 buffer_time=2.168 print_stall=0 extruder: target=240 temp=240.1 pwm=0.355
Stats 797577.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3240881 bytes_read=831989 bytes_retransmit=9 bytes_invalid=0 send_seq=63815 receive_seq=63815 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=80.1 pwm=0.445 sd_pos=498405 sysload=0.15 cputime=119.741 memavail=7291568 print_time=2803.520 buffer_time=2.531 print_stall=0 extruder: target=240 temp=240.0 pwm=0.493
Stats 797578.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3244283 bytes_read=832612 bytes_retransmit=9 bytes_invalid=0 send_seq=63881 receive_seq=63881 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.1 pwm=0.462 sd_pos=499000 sysload=0.15 cputime=119.808 memavail=7291568 print_time=2804.165 buffer_time=2.174 print_stall=0 extruder: target=240 temp=239.7 pwm=0.649
Stats 797579.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3248421 bytes_read=833284 bytes_retransmit=9 bytes_invalid=0 send_seq=63957 receive_seq=63957 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2964 freq=119992853 heater_bed: target=80 temp=80.2 pwm=0.329 sd_pos=500212 sysload=0.14 cputime=119.904 memavail=7291568 print_time=2805.617 buffer_time=2.626 print_stall=0 extruder: target=240 temp=240.0 pwm=0.448
Stats 797580.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3252780 bytes_read=833963 bytes_retransmit=9 bytes_invalid=0 send_seq=64035 receive_seq=64035 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1853 freq=119992843 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=500962 sysload=0.14 cputime=120.003 memavail=7291568 print_time=2806.157 buffer_time=2.166 print_stall=0 extruder: target=240 temp=240.0 pwm=0.448
Stats 797581.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3257892 bytes_read=834712 bytes_retransmit=9 bytes_invalid=0 send_seq=64123 receive_seq=64123 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=2756 freq=119992839 heater_bed: target=80 temp=80.1 pwm=0.457 sd_pos=502107 sysload=0.14 cputime=120.116 memavail=7291568 print_time=2807.468 buffer_time=2.476 print_stall=0 extruder: target=240 temp=240.0 pwm=0.462
Stats 797582.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3263389 bytes_read=835469 bytes_retransmit=9 bytes_invalid=0 send_seq=64216 receive_seq=64216 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=1698 freq=119992842 heater_bed: target=80 temp=80.1 pwm=0.392 sd_pos=502390 sysload=0.14 cputime=120.227 memavail=7291568 print_time=2808.374 buffer_time=2.381 print_stall=0 extruder: target=240 temp=239.7 pwm=0.555
Stats 797583.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3268509 bytes_read=836187 bytes_retransmit=9 bytes_invalid=0 send_seq=64304 receive_seq=64304 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=777 freq=119992841 heater_bed: target=80 temp=80.1 pwm=0.412 sd_pos=502644 sysload=0.14 cputime=120.322 memavail=7291572 print_time=2809.457 buffer_time=2.464 print_stall=0 extruder: target=240 temp=239.6 pwm=0.595
Stats 797584.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3272854 bytes_read=836870 bytes_retransmit=9 bytes_invalid=0 send_seq=64382 receive_seq=64382 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.1 pwm=0.459 sd_pos=503197 sysload=0.13 cputime=120.412 memavail=7290992 print_time=2810.122 buffer_time=2.127 print_stall=0 extruder: target=240 temp=240.0 pwm=0.393
Stats 797585.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3277262 bytes_read=837552 bytes_retransmit=9 bytes_invalid=0 send_seq=64460 receive_seq=64460 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=198 freq=119992834 heater_bed: target=80 temp=80.1 pwm=0.459 sd_pos=503597 sysload=0.13 cputime=120.502 memavail=7291060 print_time=2811.330 buffer_time=2.335 print_stall=0 extruder: target=240 temp=240.3 pwm=0.334
Stats 797586.5: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3281634 bytes_read=838226 bytes_retransmit=9 bytes_invalid=0 send_seq=64536 receive_seq=64536 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=404 freq=119992826 heater_bed: target=80 temp=80.1 pwm=0.404 sd_pos=503932 sysload=0.13 cputime=120.593 memavail=7290556 print_time=2812.306 buffer_time=2.309 print_stall=0 extruder: target=240 temp=240.4 pwm=0.329
Stats 797587.5: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3285602 bytes_read=838859 bytes_retransmit=9 bytes_invalid=0 send_seq=64604 receive_seq=64604 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2413 freq=119992829 heater_bed: target=80 temp=80.1 pwm=0.475 sd_pos=504558 sysload=0.13 cputime=120.668 memavail=7290556 print_time=2813.455 buffer_time=2.458 print_stall=0 extruder: target=240 temp=240.2 pwm=0.410
Stats 797588.5: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3290073 bytes_read=839541 bytes_retransmit=9 bytes_invalid=0 send_seq=64682 receive_seq=64682 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=1410 freq=119992829 heater_bed: target=80 temp=80.1 pwm=0.475 sd_pos=504749 sysload=0.13 cputime=120.744 memavail=7290556 print_time=2814.073 buffer_time=2.073 print_stall=0 extruder: target=240 temp=240.0 pwm=0.467
Stats 797589.5: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3295112 bytes_read=840249 bytes_retransmit=9 bytes_invalid=0 send_seq=64768 receive_seq=64768 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=2789 freq=119992826 heater_bed: target=80 temp=80.1 pwm=0.414 sd_pos=505856 sysload=0.12 cputime=120.852 memavail=7290556 print_time=2815.557 buffer_time=2.557 print_stall=0 extruder: target=240 temp=239.8 pwm=0.558
Stats 797590.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3300676 bytes_read=841033 bytes_retransmit=9 bytes_invalid=0 send_seq=64863 receive_seq=64863 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1040 freq=119992825 heater_bed: target=80 temp=80.1 pwm=0.518 sd_pos=506323 sysload=0.12 cputime=120.964 memavail=7290556 print_time=2816.379 buffer_time=2.378 print_stall=0 extruder: target=240 temp=239.9 pwm=0.495
Stats 797591.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3305010 bytes_read=841700 bytes_retransmit=9 bytes_invalid=0 send_seq=64938 receive_seq=64938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=2905 freq=119992829 heater_bed: target=80 temp=80.1 pwm=0.485 sd_pos=507870 sysload=0.12 cputime=121.080 memavail=7290556 print_time=2817.522 buffer_time=2.520 print_stall=0 extruder: target=240 temp=240.1 pwm=0.387
Stats 797592.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3309443 bytes_read=842358 bytes_retransmit=9 bytes_invalid=0 send_seq=65014 receive_seq=65014 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1727 freq=119992832 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=508668 sysload=0.12 cputime=121.179 memavail=7290556 print_time=2818.073 buffer_time=2.069 print_stall=0 extruder: target=240 temp=240.4 pwm=0.318
Stats 797593.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3315069 bytes_read=843141 bytes_retransmit=9 bytes_invalid=0 send_seq=65112 receive_seq=65112 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=3112 freq=119992828 heater_bed: target=80 temp=80.1 pwm=0.393 sd_pos=509918 sysload=0.12 cputime=121.296 memavail=7290556 print_time=2819.316 buffer_time=2.311 print_stall=0 extruder: target=240 temp=240.3 pwm=0.387
Stats 797594.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3320407 bytes_read=843888 bytes_retransmit=9 bytes_invalid=0 send_seq=65203 receive_seq=65203 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1919 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=510844 sysload=0.19 cputime=121.413 memavail=7290556 print_time=2820.268 buffer_time=2.262 print_stall=0 extruder: target=240 temp=240.1 pwm=0.485
Stats 797595.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3324327 bytes_read=844531 bytes_retransmit=9 bytes_invalid=0 send_seq=65276 receive_seq=65276 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=510931 sysload=0.19 cputime=121.503 memavail=7290556 print_time=2821.259 buffer_time=2.252 print_stall=0 extruder: target=240 temp=240.0 pwm=0.521
Stats 797596.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3326130 bytes_read=844990 bytes_retransmit=9 bytes_invalid=0 send_seq=65314 receive_seq=65306 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=511101 sysload=0.19 cputime=121.568 memavail=7290200 print_time=2822.163 buffer_time=2.155 print_stall=0 extruder: target=240 temp=240.0 pwm=0.457
Stats 797597.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3327573 bytes_read=845487 bytes_retransmit=9 bytes_invalid=0 send_seq=65347 receive_seq=65347 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992866 heater_bed: target=80 temp=80.0 pwm=0.402 sd_pos=511187 sysload=0.19 cputime=121.628 memavail=7290116 print_time=2823.535 buffer_time=2.525 print_stall=0 extruder: target=240 temp=240.0 pwm=0.394
Stats 797598.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3330642 bytes_read=846070 bytes_retransmit=9 bytes_invalid=0 send_seq=65408 receive_seq=65408 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992864 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=511716 sysload=0.19 cputime=121.694 memavail=7290116 print_time=2824.791 buffer_time=2.780 print_stall=0 extruder: target=240 temp=239.9 pwm=0.446
Stats 797599.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3334555 bytes_read=846723 bytes_retransmit=9 bytes_invalid=0 send_seq=65480 receive_seq=65480 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=512222 sysload=0.17 cputime=121.752 memavail=7290116 print_time=2825.521 buffer_time=2.510 print_stall=0 extruder: target=240 temp=240.1 pwm=0.392
Stats 797600.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3337287 bytes_read=847290 bytes_retransmit=9 bytes_invalid=0 send_seq=65535 receive_seq=65535 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992897 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=512395 sysload=0.17 cputime=121.823 memavail=7290052 print_time=2826.059 buffer_time=2.047 print_stall=0 extruder: target=240 temp=240.0 pwm=0.480
Stats 797601.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3341653 bytes_read=847969 bytes_retransmit=9 bytes_invalid=0 send_seq=65612 receive_seq=65612 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1176 freq=119992897 heater_bed: target=80 temp=80.0 pwm=0.366 sd_pos=513008 sysload=0.17 cputime=121.919 memavail=7290148 print_time=2827.326 buffer_time=2.312 print_stall=0 extruder: target=240 temp=239.9 pwm=0.497
Stats 797602.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3346359 bytes_read=848672 bytes_retransmit=9 bytes_invalid=0 send_seq=65694 receive_seq=65694 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=2177 freq=119992900 heater_bed: target=80 temp=80.1 pwm=0.365 sd_pos=513327 sysload=0.17 cputime=122.014 memavail=7290148 print_time=2828.576 buffer_time=2.562 print_stall=0 extruder: target=240 temp=239.7 pwm=0.536
Stats 797603.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3350874 bytes_read=849357 bytes_retransmit=9 bytes_invalid=0 send_seq=65773 receive_seq=65773 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=803 freq=119992894 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=513485 sysload=0.17 cputime=122.098 memavail=7290148 print_time=2829.193 buffer_time=2.178 print_stall=0 extruder: target=240 temp=239.9 pwm=0.467
Stats 797604.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3355446 bytes_read=850028 bytes_retransmit=9 bytes_invalid=0 send_seq=65853 receive_seq=65853 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2246 freq=119992898 heater_bed: target=80 temp=80.1 pwm=0.387 sd_pos=513832 sysload=0.16 cputime=122.190 memavail=7290148 print_time=2830.443 buffer_time=2.428 print_stall=0 extruder: target=240 temp=240.1 pwm=0.377
Stats 797605.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3360156 bytes_read=850729 bytes_retransmit=9 bytes_invalid=0 send_seq=65936 receive_seq=65936 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=1229 freq=119992920 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=514306 sysload=0.16 cputime=122.290 memavail=7290148 print_time=2831.213 buffer_time=2.198 print_stall=0 extruder: target=240 temp=240.2 pwm=0.398
Stats 797606.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3365048 bytes_read=851457 bytes_retransmit=9 bytes_invalid=0 send_seq=66020 receive_seq=66020 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1256 freq=119992914 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=514772 sysload=0.16 cputime=122.387 memavail=7290148 print_time=2832.470 buffer_time=2.453 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 797607.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3367725 bytes_read=851985 bytes_retransmit=9 bytes_invalid=0 send_seq=66070 receive_seq=66070 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992906 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=514802 sysload=0.16 cputime=122.445 memavail=7290152 print_time=2833.269 buffer_time=2.252 print_stall=0 extruder: target=240 temp=239.9 pwm=0.497
Stats 797608.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3369693 bytes_read=852478 bytes_retransmit=9 bytes_invalid=0 send_seq=66110 receive_seq=66110 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992908 heater_bed: target=80 temp=80.1 pwm=0.363 sd_pos=514996 sysload=0.16 cputime=122.500 memavail=7290152 print_time=2834.812 buffer_time=2.794 print_stall=0 extruder: target=240 temp=239.7 pwm=0.569
Stats 797609.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3370491 bytes_read=852895 bytes_retransmit=9 bytes_invalid=0 send_seq=66135 receive_seq=66135 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992959 heater_bed: target=80 temp=80.1 pwm=0.438 sd_pos=515147 sysload=0.15 cputime=122.557 memavail=7290152 print_time=2835.319 buffer_time=2.300 print_stall=0 extruder: target=240 temp=239.4 pwm=0.657
Stats 797610.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3372450 bytes_read=853388 bytes_retransmit=9 bytes_invalid=0 send_seq=66178 receive_seq=66178 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992948 heater_bed: target=80 temp=80.1 pwm=0.461 sd_pos=515389 sysload=0.15 cputime=122.619 memavail=7290152 print_time=2836.465 buffer_time=2.445 print_stall=0 extruder: target=240 temp=239.8 pwm=0.407
Stats 797611.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3373308 bytes_read=853812 bytes_retransmit=9 bytes_invalid=0 send_seq=66201 receive_seq=66201 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992935 heater_bed: target=80 temp=80.1 pwm=0.458 sd_pos=515460 sysload=0.15 cputime=122.672 memavail=7290152 print_time=2837.374 buffer_time=2.353 print_stall=0 extruder: target=240 temp=240.0 pwm=0.407
Stats 797612.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3374092 bytes_read=854214 bytes_retransmit=9 bytes_invalid=0 send_seq=66223 receive_seq=66223 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992924 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=515544 sysload=0.15 cputime=122.717 memavail=7290152 print_time=2838.268 buffer_time=2.246 print_stall=0 extruder: target=240 temp=240.4 pwm=0.293
Stats 797613.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3377154 bytes_read=854782 bytes_retransmit=9 bytes_invalid=0 send_seq=66281 receive_seq=66281 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992951 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=515936 sysload=0.15 cputime=122.770 memavail=7290152 print_time=2839.583 buffer_time=2.560 print_stall=0 extruder: target=240 temp=240.2 pwm=0.411
Stats 797614.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3378654 bytes_read=855245 bytes_retransmit=9 bytes_invalid=0 send_seq=66315 receive_seq=66315 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992956 heater_bed: target=80 temp=80.1 pwm=0.420 sd_pos=516240 sysload=0.13 cputime=122.830 memavail=7289320 print_time=2840.301 buffer_time=2.278 print_stall=0 extruder: target=240 temp=240.0 pwm=0.529
Stats 797615.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3380653 bytes_read=855742 bytes_retransmit=9 bytes_invalid=0 send_seq=66356 receive_seq=66356 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992950 heater_bed: target=80 temp=80.0 pwm=0.506 sd_pos=516822 sysload=0.13 cputime=122.899 memavail=7289388 print_time=2841.146 buffer_time=2.123 print_stall=0 extruder: target=240 temp=239.8 pwm=0.529
Stats 797616.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3382761 bytes_read=856255 bytes_retransmit=9 bytes_invalid=0 send_seq=66400 receive_seq=66400 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992940 heater_bed: target=80 temp=80.1 pwm=0.402 sd_pos=517161 sysload=0.13 cputime=122.954 memavail=7289388 print_time=2842.435 buffer_time=2.411 print_stall=0 extruder: target=240 temp=239.8 pwm=0.476
Stats 797617.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3384959 bytes_read=856773 bytes_retransmit=9 bytes_invalid=0 send_seq=66445 receive_seq=66445 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992932 heater_bed: target=80 temp=80.0 pwm=0.530 sd_pos=517533 sysload=0.13 cputime=123.009 memavail=7289400 print_time=2843.193 buffer_time=2.168 print_stall=0 extruder: target=240 temp=240.0 pwm=0.378
Stats 797618.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3389474 bytes_read=857425 bytes_retransmit=9 bytes_invalid=0 send_seq=66529 receive_seq=66517 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=1664 upcoming_bytes=0 freq=119992927 heater_bed: target=80 temp=80.1 pwm=0.414 sd_pos=518802 sysload=0.13 cputime=123.089 memavail=7289400 print_time=2844.748 buffer_time=2.714 print_stall=0 extruder: target=240 temp=240.0 pwm=0.451
Stats 797619.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3393743 bytes_read=858148 bytes_retransmit=9 bytes_invalid=0 send_seq=66606 receive_seq=66606 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=88 freq=119992927 heater_bed: target=80 temp=80.1 pwm=0.363 sd_pos=519227 sysload=0.12 cputime=123.147 memavail=7289400 print_time=2845.304 buffer_time=2.270 print_stall=0 extruder: target=240 temp=240.2 pwm=0.384
Stats 797620.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3397841 bytes_read=858801 bytes_retransmit=9 bytes_invalid=0 send_seq=66678 receive_seq=66678 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=1960 freq=119992919 heater_bed: target=80 temp=80.1 pwm=0.498 sd_pos=520177 sysload=0.12 cputime=123.239 memavail=7289400 print_time=2846.729 buffer_time=2.695 print_stall=0 extruder: target=240 temp=240.0 pwm=0.441
Stats 797621.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3402157 bytes_read=859489 bytes_retransmit=9 bytes_invalid=0 send_seq=66754 receive_seq=66754 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=573 freq=119992908 heater_bed: target=80 temp=80.1 pwm=0.446 sd_pos=520446 sysload=0.12 cputime=123.324 memavail=7289400 print_time=2847.315 buffer_time=2.279 print_stall=0 extruder: target=240 temp=240.2 pwm=0.429
Stats 797622.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3406465 bytes_read=860142 bytes_retransmit=9 bytes_invalid=0 send_seq=66829 receive_seq=66829 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=2860 freq=119992905 heater_bed: target=80 temp=80.0 pwm=0.555 sd_pos=521458 sysload=0.12 cputime=123.431 memavail=7289400 print_time=2848.737 buffer_time=2.701 print_stall=0 extruder: target=240 temp=240.1 pwm=0.406
Stats 797623.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3410723 bytes_read=860815 bytes_retransmit=9 bytes_invalid=0 send_seq=66905 receive_seq=66905 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=1761 freq=119992902 heater_bed: target=80 temp=80.1 pwm=0.418 sd_pos=522232 sysload=0.12 cputime=123.521 memavail=7289400 print_time=2849.293 buffer_time=2.256 print_stall=0 extruder: target=240 temp=239.9 pwm=0.504
Stats 797624.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3415568 bytes_read=861527 bytes_retransmit=9 bytes_invalid=0 send_seq=66989 receive_seq=66989 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=3220 freq=119992892 heater_bed: target=80 temp=80.0 pwm=0.449 sd_pos=523750 sysload=0.11 cputime=123.630 memavail=7289400 print_time=2850.487 buffer_time=2.449 print_stall=0 extruder: target=240 temp=239.9 pwm=0.481
Stats 797625.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3420865 bytes_read=862255 bytes_retransmit=9 bytes_invalid=0 send_seq=67079 receive_seq=67079 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1684 freq=119992887 heater_bed: target=80 temp=80.0 pwm=0.499 sd_pos=524348 sysload=0.11 cputime=123.722 memavail=7289400 print_time=2851.117 buffer_time=2.078 print_stall=0 extruder: target=240 temp=240.1 pwm=0.379
Stats 797626.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3425915 bytes_read=862999 bytes_retransmit=9 bytes_invalid=0 send_seq=67166 receive_seq=67166 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=2282 freq=119992881 heater_bed: target=80 temp=80.0 pwm=0.565 sd_pos=525158 sysload=0.11 cputime=123.827 memavail=7289404 print_time=2852.441 buffer_time=2.401 print_stall=0 extruder: target=240 temp=240.1 pwm=0.379
Stats 797627.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3431636 bytes_read=863781 bytes_retransmit=9 bytes_invalid=0 send_seq=67264 receive_seq=67264 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=271 freq=119992873 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=525740 sysload=0.11 cputime=123.928 memavail=7289404 print_time=2853.122 buffer_time=2.082 print_stall=0 extruder: target=240 temp=240.1 pwm=0.477
Stats 797628.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3436633 bytes_read=864489 bytes_retransmit=9 bytes_invalid=0 send_seq=67350 receive_seq=67350 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=2092 freq=119992871 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=526591 sysload=0.11 cputime=124.041 memavail=7289404 print_time=2854.560 buffer_time=2.519 print_stall=0 extruder: target=240 temp=240.0 pwm=0.497
Stats 797629.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3440850 bytes_read=865157 bytes_retransmit=9 bytes_invalid=0 send_seq=67425 receive_seq=67425 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=1179 freq=119992864 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=527042 sysload=0.18 cputime=124.131 memavail=7289404 print_time=2855.254 buffer_time=2.212 print_stall=0 extruder: target=240 temp=240.0 pwm=0.412
Stats 797630.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3445859 bytes_read=865874 bytes_retransmit=9 bytes_invalid=0 send_seq=67510 receive_seq=67510 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=220 freq=119992862 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=527452 sysload=0.18 cputime=124.231 memavail=7289404 print_time=2856.399 buffer_time=2.355 print_stall=0 extruder: target=240 temp=239.8 pwm=0.476
Stats 797631.5: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3450526 bytes_read=866588 bytes_retransmit=9 bytes_invalid=0 send_seq=67594 receive_seq=67594 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1087 freq=119992860 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=527785 sysload=0.18 cputime=124.317 memavail=7289404 print_time=2857.594 buffer_time=2.551 print_stall=0 extruder: target=240 temp=239.8 pwm=0.508
Stats 797632.5: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3454177 bytes_read=867211 bytes_retransmit=9 bytes_invalid=0 send_seq=67660 receive_seq=67660 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=874 freq=119992897 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=528220 sysload=0.18 cputime=124.400 memavail=7289404 print_time=2858.378 buffer_time=2.334 print_stall=0 extruder: target=240 temp=239.9 pwm=0.487
Stats 797633.5: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3458364 bytes_read=867873 bytes_retransmit=9 bytes_invalid=0 send_seq=67734 receive_seq=67734 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=2884 freq=119992893 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=529570 sysload=0.18 cputime=124.518 memavail=7289404 print_time=2859.569 buffer_time=2.525 print_stall=0 extruder: target=240 temp=240.0 pwm=0.467
Stats 797634.5: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3463327 bytes_read=868571 bytes_retransmit=9 bytes_invalid=0 send_seq=67818 receive_seq=67818 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=1375 freq=119992888 heater_bed: target=80 temp=79.9 pwm=0.569 sd_pos=530650 sysload=0.33 cputime=124.620 memavail=7289404 print_time=2860.173 buffer_time=2.129 print_stall=0 extruder: target=240 temp=240.4 pwm=0.300
Stats 797635.5: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3467646 bytes_read=869234 bytes_retransmit=9 bytes_invalid=0 send_seq=67892 receive_seq=67892 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992886 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=530845 sysload=0.33 cputime=124.716 memavail=7289180 print_time=2861.426 buffer_time=2.381 print_stall=0 extruder: target=240 temp=240.1 pwm=0.446
Stats 797636.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3468660 bytes_read=869672 bytes_retransmit=9 bytes_invalid=0 send_seq=67918 receive_seq=67918 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992880 heater_bed: target=80 temp=80.0 pwm=0.445 sd_pos=530903 sysload=0.33 cputime=124.775 memavail=7289180 print_time=2862.198 buffer_time=2.153 print_stall=0 extruder: target=240 temp=240.1 pwm=0.455
Stats 797637.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3470427 bytes_read=870140 bytes_retransmit=9 bytes_invalid=0 send_seq=67956 receive_seq=67956 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992922 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=531073 sysload=0.33 cputime=124.846 memavail=7289184 print_time=2863.117 buffer_time=2.071 print_stall=0 extruder: target=240 temp=240.3 pwm=0.306
Stats 797638.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3472049 bytes_read=870608 bytes_retransmit=9 bytes_invalid=0 send_seq=67991 receive_seq=67991 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992913 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=531160 sysload=0.33 cputime=124.916 memavail=7289184 print_time=2864.435 buffer_time=2.388 print_stall=0 extruder: target=240 temp=240.1 pwm=0.364
Stats 797639.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3474315 bytes_read=871136 bytes_retransmit=9 bytes_invalid=0 send_seq=68039 receive_seq=68039 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992904 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=531355 sysload=0.30 cputime=124.984 memavail=7289184 print_time=2865.134 buffer_time=2.087 print_stall=0 extruder: target=240 temp=240.1 pwm=0.404
Stats 797640.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3478800 bytes_read=871822 bytes_retransmit=9 bytes_invalid=0 send_seq=68122 receive_seq=68122 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992893 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=532044 sysload=0.30 cputime=125.076 memavail=7289184 print_time=2866.233 buffer_time=2.184 print_stall=0 extruder: target=240 temp=239.8 pwm=0.542
Stats 797641.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3483364 bytes_read=872556 bytes_retransmit=9 bytes_invalid=0 send_seq=68206 receive_seq=68206 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=699 freq=119992881 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=532391 sysload=0.30 cputime=125.164 memavail=7289184 print_time=2867.480 buffer_time=2.431 print_stall=0 extruder: target=240 temp=240.1 pwm=0.403
Stats 797642.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3487084 bytes_read=873178 bytes_retransmit=9 bytes_invalid=0 send_seq=68272 receive_seq=68272 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992873 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=532549 sysload=0.30 cputime=125.252 memavail=7289184 print_time=2868.111 buffer_time=2.061 print_stall=0 extruder: target=240 temp=240.0 pwm=0.492
Stats 797643.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3491539 bytes_read=873851 bytes_retransmit=9 bytes_invalid=0 send_seq=68351 receive_seq=68351 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1130 freq=119992878 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=532872 sysload=0.30 cputime=125.354 memavail=7289184 print_time=2869.358 buffer_time=2.307 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 797644.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3495803 bytes_read=874514 bytes_retransmit=9 bytes_invalid=0 send_seq=68425 receive_seq=68425 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992880 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=533063 sysload=0.44 cputime=125.458 memavail=7289184 print_time=2869.974 buffer_time=1.921 print_stall=0 extruder: target=240 temp=239.9 pwm=0.484
Stats 797645.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3500588 bytes_read=875221 bytes_retransmit=9 bytes_invalid=0 send_seq=68508 receive_seq=68508 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=1363 freq=119992905 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=533686 sysload=0.44 cputime=125.566 memavail=7289400 print_time=2871.193 buffer_time=2.140 print_stall=0 extruder: target=240 temp=239.8 pwm=0.484
Stats 797646.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3505535 bytes_read=875940 bytes_retransmit=9 bytes_invalid=0 send_seq=68593 receive_seq=68593 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2313 freq=119992901 heater_bed: target=80 temp=80.1 pwm=0.360 sd_pos=534231 sysload=0.44 cputime=125.676 memavail=7289400 print_time=2872.261 buffer_time=2.207 print_stall=0 extruder: target=240 temp=239.9 pwm=0.438
Stats 797647.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3510719 bytes_read=876678 bytes_retransmit=9 bytes_invalid=0 send_seq=68682 receive_seq=68682 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=44 freq=119992892 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=534477 sysload=0.44 cputime=125.771 memavail=7289400 print_time=2873.100 buffer_time=2.045 print_stall=0 extruder: target=240 temp=239.9 pwm=0.476
Stats 797648.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3511906 bytes_read=877115 bytes_retransmit=9 bytes_invalid=0 send_seq=68711 receive_seq=68711 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.0 pwm=0.507 sd_pos=534606 sysload=0.44 cputime=125.834 memavail=7289400 print_time=2874.078 buffer_time=2.023 print_stall=0 extruder: target=240 temp=240.0 pwm=0.447
Stats 797649.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3513387 bytes_read=877558 bytes_retransmit=9 bytes_invalid=0 send_seq=68744 receive_seq=68744 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992891 heater_bed: target=80 temp=80.1 pwm=0.384 sd_pos=534826 sysload=0.40 cputime=125.900 memavail=7289400 print_time=2875.140 buffer_time=2.083 print_stall=0 extruder: target=240 temp=240.0 pwm=0.424
Stats 797650.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3515200 bytes_read=878055 bytes_retransmit=9 bytes_invalid=0 send_seq=68782 receive_seq=68782 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992889 heater_bed: target=80 temp=80.1 pwm=0.436 sd_pos=535131 sysload=0.40 cputime=125.965 memavail=7289400 print_time=2876.068 buffer_time=2.010 print_stall=0 extruder: target=240 temp=240.1 pwm=0.424
Stats 797651.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3516356 bytes_read=878484 bytes_retransmit=9 bytes_invalid=0 send_seq=68809 receive_seq=68809 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992880 heater_bed: target=80 temp=80.1 pwm=0.503 sd_pos=535306 sysload=0.40 cputime=126.034 memavail=7289400 print_time=2877.624 buffer_time=2.565 print_stall=0 extruder: target=240 temp=240.1 pwm=0.424
Stats 797652.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3517384 bytes_read=878887 bytes_retransmit=9 bytes_invalid=0 send_seq=68834 receive_seq=68834 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992873 heater_bed: target=80 temp=80.1 pwm=0.406 sd_pos=535476 sysload=0.40 cputime=126.092 memavail=7289400 print_time=2878.507 buffer_time=2.448 print_stall=0 extruder: target=240 temp=240.1 pwm=0.424
Stats 797653.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3519851 bytes_read=879434 bytes_retransmit=9 bytes_invalid=0 send_seq=68882 receive_seq=68882 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=10 freq=119992868 heater_bed: target=80 temp=80.1 pwm=0.467 sd_pos=535912 sysload=0.40 cputime=126.160 memavail=7289400 print_time=2879.979 buffer_time=2.919 print_stall=0 extruder: target=240 temp=239.8 pwm=0.567
Stats 797654.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3520796 bytes_read=879847 bytes_retransmit=9 bytes_invalid=0 send_seq=68909 receive_seq=68909 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=10 freq=119992861 heater_bed: target=80 temp=80.1 pwm=0.429 sd_pos=535994 sysload=0.37 cputime=126.222 memavail=7289176 print_time=2880.293 buffer_time=2.232 print_stall=0 extruder: target=240 temp=239.8 pwm=0.500
Stats 797655.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3522406 bytes_read=880295 bytes_retransmit=9 bytes_invalid=0 send_seq=68943 receive_seq=68943 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=80.1 pwm=0.429 sd_pos=536426 sysload=0.37 cputime=126.284 memavail=7289176 print_time=2881.124 buffer_time=2.063 print_stall=0 extruder: target=240 temp=240.0 pwm=0.440
Stats 797656.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3524717 bytes_read=880862 bytes_retransmit=9 bytes_invalid=0 send_seq=68992 receive_seq=68992 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.1 pwm=0.433 sd_pos=537009 sysload=0.37 cputime=126.351 memavail=7289620 print_time=2882.334 buffer_time=2.273 print_stall=0 extruder: target=240 temp=240.1 pwm=0.448
Stats 797657.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3528101 bytes_read=881470 bytes_retransmit=9 bytes_invalid=0 send_seq=69058 receive_seq=69058 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=80.1 pwm=0.378 sd_pos=537540 sysload=0.37 cputime=126.418 memavail=7289460 print_time=2883.662 buffer_time=2.600 print_stall=0 extruder: target=240 temp=240.0 pwm=0.442
Stats 797658.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3531923 bytes_read=882103 bytes_retransmit=9 bytes_invalid=0 send_seq=69129 receive_seq=69129 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.0 pwm=0.547 sd_pos=538176 sysload=0.37 cputime=126.484 memavail=7289460 print_time=2884.399 buffer_time=2.336 print_stall=0 extruder: target=240 temp=240.0 pwm=0.442
Stats 797659.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3535285 bytes_read=882740 bytes_retransmit=9 bytes_invalid=0 send_seq=69195 receive_seq=69195 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=587 freq=119992846 heater_bed: target=80 temp=80.0 pwm=0.513 sd_pos=538789 sysload=0.34 cputime=126.559 memavail=7289460 print_time=2885.113 buffer_time=2.049 print_stall=0 extruder: target=240 temp=239.7 pwm=0.511
Stats 797660.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=3539447 bytes_read=883388 bytes_retransmit=9 bytes_invalid=0 send_seq=69269 receive_seq=69269 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=2826 freq=119992846 heater_bed: target=80 temp=80.1 pwm=0.395 sd_pos=540149 sysload=0.34 cputime=126.664 memavail=7289236 print_time=2886.382 buffer_time=2.318 print_stall=0 extruder: target=240 temp=239.9 pwm=0.418
Stats 797661.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3545002 bytes_read=884157 bytes_retransmit=9 bytes_invalid=0 send_seq=69364 receive_seq=69364 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=2769 freq=119992844 heater_bed: target=80 temp=80.1 pwm=0.386 sd_pos=541339 sysload=0.34 cputime=126.772 memavail=7289236 print_time=2887.421 buffer_time=2.356 print_stall=0 extruder: target=240 temp=240.1 pwm=0.418
Stats 797662.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3550311 bytes_read=884924 bytes_retransmit=9 bytes_invalid=0 send_seq=69456 receive_seq=69456 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1249 freq=119992838 heater_bed: target=80 temp=80.0 pwm=0.490 sd_pos=541779 sysload=0.34 cputime=126.875 memavail=7289236 print_time=2888.279 buffer_time=2.213 print_stall=0 extruder: target=240 temp=240.0 pwm=0.418
Stats 797663.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3555516 bytes_read=885652 bytes_retransmit=9 bytes_invalid=0 send_seq=69546 receive_seq=69546 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=2294 freq=119992863 heater_bed: target=80 temp=80.1 pwm=0.394 sd_pos=542175 sysload=0.34 cputime=126.973 memavail=7289236 print_time=2889.411 buffer_time=2.345 print_stall=0 extruder: target=240 temp=240.1 pwm=0.456
Stats 797664.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3559795 bytes_read=886310 bytes_retransmit=9 bytes_invalid=0 send_seq=69622 receive_seq=69622 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=4392 freq=119992861 heater_bed: target=80 temp=80.0 pwm=0.521 sd_pos=542654 sysload=0.31 cputime=127.068 memavail=7289236 print_time=2890.754 buffer_time=2.687 print_stall=0 extruder: target=240 temp=239.9 pwm=0.525
Stats 797665.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3565544 bytes_read=887107 bytes_retransmit=9 bytes_invalid=0 send_seq=69720 receive_seq=69720 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1502 freq=119992858 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=542818 sysload=0.31 cputime=127.165 memavail=7289236 print_time=2891.298 buffer_time=2.231 print_stall=0 extruder: target=240 temp=239.7 pwm=0.602
Stats 797666.5: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3571015 bytes_read=887871 bytes_retransmit=9 bytes_invalid=0 send_seq=69814 receive_seq=69814 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=979 freq=119992855 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=543757 sysload=0.31 cputime=127.275 memavail=7288984 print_time=2892.470 buffer_time=2.403 print_stall=0 extruder: target=240 temp=239.9 pwm=0.476
Stats 797667.5: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3573071 bytes_read=888364 bytes_retransmit=9 bytes_invalid=0 send_seq=69857 receive_seq=69857 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=543824 sysload=0.31 cputime=127.331 memavail=7288992 print_time=2893.472 buffer_time=2.404 print_stall=0 extruder: target=240 temp=240.1 pwm=0.378
Stats 797668.5: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3577273 bytes_read=889066 bytes_retransmit=9 bytes_invalid=0 send_seq=69936 receive_seq=69936 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=10 freq=119992846 heater_bed: target=80 temp=80.1 pwm=0.469 sd_pos=544297 sysload=0.31 cputime=127.397 memavail=7288992 print_time=2894.456 buffer_time=2.387 print_stall=0 extruder: target=240 temp=240.3 pwm=0.314
Stats 797669.5: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3581964 bytes_read=889779 bytes_retransmit=9 bytes_invalid=0 send_seq=70023 receive_seq=70023 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992841 heater_bed: target=80 temp=80.1 pwm=0.392 sd_pos=544580 sysload=0.37 cputime=127.459 memavail=7288992 print_time=2895.540 buffer_time=2.470 print_stall=0 extruder: target=240 temp=240.1 pwm=0.402
Stats 797670.5: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3584267 bytes_read=890282 bytes_retransmit=9 bytes_invalid=0 send_seq=70068 receive_seq=70068 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992835 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=544721 sysload=0.37 cputime=127.526 memavail=7288992 print_time=2896.135 buffer_time=2.064 print_stall=0 extruder: target=240 temp=240.1 pwm=0.402
Stats 797671.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3589515 bytes_read=891070 bytes_retransmit=9 bytes_invalid=0 send_seq=70161 receive_seq=70161 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=545515 sysload=0.37 cputime=127.616 memavail=7289152 print_time=2897.276 buffer_time=2.204 print_stall=0 extruder: target=240 temp=240.0 pwm=0.473
Stats 797672.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3593168 bytes_read=891673 bytes_retransmit=9 bytes_invalid=0 send_seq=70226 receive_seq=70226 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.491 sd_pos=545898 sysload=0.37 cputime=127.693 memavail=7289248 print_time=2898.157 buffer_time=2.084 print_stall=0 extruder: target=240 temp=240.0 pwm=0.453
Stats 797673.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3598029 bytes_read=892381 bytes_retransmit=9 bytes_invalid=0 send_seq=70312 receive_seq=70312 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=1337 freq=119992832 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=547098 sysload=0.37 cputime=127.786 memavail=7289248 print_time=2899.343 buffer_time=2.269 print_stall=0 extruder: target=240 temp=239.9 pwm=0.453
Stats 797674.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3602080 bytes_read=893043 bytes_retransmit=9 bytes_invalid=0 send_seq=70383 receive_seq=70383 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=875 freq=119992833 heater_bed: target=80 temp=80.0 pwm=0.539 sd_pos=547846 sysload=0.34 cputime=127.879 memavail=7289248 print_time=2899.978 buffer_time=1.904 print_stall=0 extruder: target=240 temp=240.1 pwm=0.369
Stats 797675.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3607517 bytes_read=893796 bytes_retransmit=9 bytes_invalid=0 send_seq=70476 receive_seq=70476 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1912 freq=119992830 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=549244 sysload=0.34 cputime=127.980 memavail=7292784 print_time=2901.260 buffer_time=2.185 print_stall=0 extruder: target=240 temp=240.3 pwm=0.321
Stats 797676.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3612856 bytes_read=894532 bytes_retransmit=9 bytes_invalid=0 send_seq=70569 receive_seq=70569 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=3910 freq=119992828 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=550475 sysload=0.34 cputime=128.050 memavail=7292028 print_time=2902.622 buffer_time=2.546 print_stall=0 extruder: target=240 temp=240.1 pwm=0.399
Stats 797677.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3617863 bytes_read=895269 bytes_retransmit=9 bytes_invalid=0 send_seq=70656 receive_seq=70656 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=1448 freq=119992840 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=551179 sysload=0.34 cputime=128.122 memavail=7292028 print_time=2903.080 buffer_time=2.003 print_stall=0 extruder: target=240 temp=239.9 pwm=0.542
Stats 797678.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3623667 bytes_read=896042 bytes_retransmit=9 bytes_invalid=0 send_seq=70755 receive_seq=70755 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=448 freq=119992860 heater_bed: target=80 temp=80.0 pwm=0.534 sd_pos=551845 sysload=0.34 cputime=128.207 memavail=7292028 print_time=2904.491 buffer_time=2.414 print_stall=0 extruder: target=240 temp=239.9 pwm=0.488
Stats 797679.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3625121 bytes_read=896485 bytes_retransmit=9 bytes_invalid=0 send_seq=70785 receive_seq=70785 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=551904 sysload=0.31 cputime=128.264 memavail=7292028 print_time=2905.255 buffer_time=2.177 print_stall=0 extruder: target=240 temp=240.0 pwm=0.420
Stats 797680.5: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3627403 bytes_read=897007 bytes_retransmit=9 bytes_invalid=0 send_seq=70831 receive_seq=70831 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.0 pwm=0.515 sd_pos=552603 sysload=0.31 cputime=128.321 memavail=7292028 print_time=2906.183 buffer_time=2.104 print_stall=0 extruder: target=240 temp=239.9 pwm=0.508
Stats 797681.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3628987 bytes_read=897451 bytes_retransmit=9 bytes_invalid=0 send_seq=70867 receive_seq=70861 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=79.9 pwm=0.520 sd_pos=552718 sysload=0.31 cputime=128.379 memavail=7291776 print_time=2907.485 buffer_time=2.405 print_stall=0 extruder: target=240 temp=240.3 pwm=0.303
Stats 797682.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3632267 bytes_read=898084 bytes_retransmit=9 bytes_invalid=0 send_seq=70929 receive_seq=70929 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992889 heater_bed: target=80 temp=79.9 pwm=0.520 sd_pos=553688 sysload=0.31 cputime=128.457 memavail=7291776 print_time=2908.280 buffer_time=2.199 print_stall=0 extruder: target=240 temp=240.2 pwm=0.426
Stats 797683.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3636790 bytes_read=898736 bytes_retransmit=9 bytes_invalid=0 send_seq=71013 receive_seq=71001 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=1002 upcoming_bytes=547 freq=119992887 heater_bed: target=80 temp=79.9 pwm=0.459 sd_pos=554350 sysload=0.31 cputime=128.527 memavail=7291776 print_time=2909.685 buffer_time=2.601 print_stall=0 extruder: target=240 temp=239.8 pwm=0.553
Stats 797684.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3640578 bytes_read=899414 bytes_retransmit=9 bytes_invalid=0 send_seq=71081 receive_seq=71081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=430 freq=119992879 heater_bed: target=80 temp=79.9 pwm=0.459 sd_pos=554511 sysload=0.29 cputime=128.594 memavail=7291776 print_time=2910.232 buffer_time=2.148 print_stall=0 extruder: target=240 temp=240.1 pwm=0.419
Stats 797685.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3645028 bytes_read=900108 bytes_retransmit=9 bytes_invalid=0 send_seq=71158 receive_seq=71158 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1431 freq=119992884 heater_bed: target=80 temp=80.0 pwm=0.366 sd_pos=554832 sysload=0.29 cputime=128.696 memavail=7291776 print_time=2911.460 buffer_time=2.375 print_stall=0 extruder: target=240 temp=240.1 pwm=0.377
Stats 797686.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3649744 bytes_read=900805 bytes_retransmit=9 bytes_invalid=0 send_seq=71239 receive_seq=71239 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=2431 freq=119992905 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=555155 sysload=0.29 cputime=128.796 memavail=7290796 print_time=2912.689 buffer_time=2.601 print_stall=0 extruder: target=240 temp=240.0 pwm=0.463
Stats 797687.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3654155 bytes_read=901468 bytes_retransmit=9 bytes_invalid=0 send_seq=71316 receive_seq=71316 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1265 freq=119992903 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=555328 sysload=0.29 cputime=128.880 memavail=7290796 print_time=2913.311 buffer_time=2.222 print_stall=0 extruder: target=240 temp=240.0 pwm=0.460
Stats 797688.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3658805 bytes_read=902161 bytes_retransmit=9 bytes_invalid=0 send_seq=71396 receive_seq=71396 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=2875 freq=119992899 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=556314 sysload=0.29 cputime=128.980 memavail=7290796 print_time=2914.601 buffer_time=2.511 print_stall=0 extruder: target=240 temp=240.1 pwm=0.422
Stats 797689.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3663734 bytes_read=902873 bytes_retransmit=9 bytes_invalid=0 send_seq=71480 receive_seq=71480 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1520 freq=119992895 heater_bed: target=80 temp=80.0 pwm=0.531 sd_pos=556777 sysload=0.42 cputime=129.073 memavail=7286764 print_time=2915.208 buffer_time=2.117 print_stall=0 extruder: target=240 temp=240.0 pwm=0.457
Stats 797690.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3668931 bytes_read=903612 bytes_retransmit=9 bytes_invalid=0 send_seq=71569 receive_seq=71569 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=183 freq=119992886 heater_bed: target=80 temp=80.0 pwm=0.491 sd_pos=557188 sysload=0.42 cputime=129.184 memavail=7289252 print_time=2916.234 buffer_time=2.143 print_stall=0 extruder: target=240 temp=240.1 pwm=0.447
Stats 797691.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3671495 bytes_read=904145 bytes_retransmit=9 bytes_invalid=0 send_seq=71617 receive_seq=71617 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992931 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=557386 sysload=0.42 cputime=129.249 memavail=7289252 print_time=2917.209 buffer_time=2.117 print_stall=0 extruder: target=240 temp=240.1 pwm=0.432
Stats 797692.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3672692 bytes_read=904592 bytes_retransmit=9 bytes_invalid=0 send_seq=71648 receive_seq=71648 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992921 heater_bed: target=80 temp=80.0 pwm=0.351 sd_pos=557611 sysload=0.42 cputime=129.314 memavail=7289252 print_time=2918.304 buffer_time=2.212 print_stall=0 extruder: target=240 temp=239.9 pwm=0.445
Stats 797693.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3674890 bytes_read=905100 bytes_retransmit=9 bytes_invalid=0 send_seq=71694 receive_seq=71694 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992909 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=557914 sysload=0.42 cputime=129.396 memavail=7289252 print_time=2919.345 buffer_time=2.251 print_stall=0 extruder: target=240 temp=240.1 pwm=0.412
Stats 797694.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3676358 bytes_read=905558 bytes_retransmit=9 bytes_invalid=0 send_seq=71727 receive_seq=71727 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992897 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=558139 sysload=0.39 cputime=129.460 memavail=7289252 print_time=2920.296 buffer_time=2.201 print_stall=0 extruder: target=240 temp=240.0 pwm=0.412
Stats 797695.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3677238 bytes_read=905975 bytes_retransmit=9 bytes_invalid=0 send_seq=71752 receive_seq=71752 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992924 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=558198 sysload=0.39 cputime=129.528 memavail=7289252 print_time=2921.178 buffer_time=2.083 print_stall=0 extruder: target=240 temp=240.1 pwm=0.413
Stats 797696.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3679046 bytes_read=906458 bytes_retransmit=9 bytes_invalid=0 send_seq=71790 receive_seq=71790 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992916 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=558503 sysload=0.39 cputime=129.604 memavail=7289252 print_time=2922.270 buffer_time=2.174 print_stall=0 extruder: target=240 temp=240.1 pwm=0.387
Stats 797697.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3681184 bytes_read=906971 bytes_retransmit=9 bytes_invalid=0 send_seq=71834 receive_seq=71834 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992907 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=558742 sysload=0.39 cputime=129.670 memavail=7289252 print_time=2923.366 buffer_time=2.269 print_stall=0 extruder: target=240 temp=240.1 pwm=0.392
Stats 797698.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3683582 bytes_read=907513 bytes_retransmit=9 bytes_invalid=0 send_seq=71884 receive_seq=71884 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992900 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=559242 sysload=0.39 cputime=129.747 memavail=7289252 print_time=2924.526 buffer_time=2.429 print_stall=0 extruder: target=240 temp=239.9 pwm=0.516
Stats 797699.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3686043 bytes_read=908041 bytes_retransmit=9 bytes_invalid=0 send_seq=71934 receive_seq=71934 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992936 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=559796 sysload=0.36 cputime=129.818 memavail=7289028 print_time=2925.732 buffer_time=2.633 print_stall=0 extruder: target=240 temp=239.9 pwm=0.468
Stats 797700.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3687070 bytes_read=908464 bytes_retransmit=9 bytes_invalid=0 send_seq=71960 receive_seq=71960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992926 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=559967 sysload=0.36 cputime=129.883 memavail=7289028 print_time=2926.239 buffer_time=2.140 print_stall=0 extruder: target=240 temp=239.9 pwm=0.473
Stats 797701.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3690905 bytes_read=909141 bytes_retransmit=9 bytes_invalid=0 send_seq=72034 receive_seq=72034 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992917 heater_bed: target=80 temp=80.0 pwm=0.383 sd_pos=560589 sysload=0.36 cputime=129.965 memavail=7289028 print_time=2927.462 buffer_time=2.362 print_stall=0 extruder: target=240 temp=239.9 pwm=0.412
Stats 797702.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3694147 bytes_read=909739 bytes_retransmit=9 bytes_invalid=0 send_seq=72098 receive_seq=72098 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992905 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=561536 sysload=0.36 cputime=130.036 memavail=7289028 print_time=2928.184 buffer_time=2.082 print_stall=0 extruder: target=240 temp=240.1 pwm=0.374
Stats 797703.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3699139 bytes_read=910498 bytes_retransmit=9 bytes_invalid=0 send_seq=72189 receive_seq=72189 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=318 freq=119992904 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=562316 sysload=0.36 cputime=130.124 memavail=7289028 print_time=2929.468 buffer_time=2.367 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 797704.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3703273 bytes_read=911105 bytes_retransmit=9 bytes_invalid=0 send_seq=72262 receive_seq=72252 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=2015 freq=119992897 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=562770 sysload=0.41 cputime=130.222 memavail=7288804 print_time=2930.762 buffer_time=2.656 print_stall=0 extruder: target=240 temp=240.2 pwm=0.392
Stats 797705.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=3707610 bytes_read=911808 bytes_retransmit=9 bytes_invalid=0 send_seq=72337 receive_seq=72337 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1589 freq=119992891 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=563386 sysload=0.41 cputime=130.321 memavail=7288984 print_time=2931.558 buffer_time=2.452 print_stall=0 extruder: target=240 temp=240.0 pwm=0.452
Stats 797706.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3711819 bytes_read=912482 bytes_retransmit=9 bytes_invalid=0 send_seq=72410 receive_seq=72410 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1447 freq=119992881 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=564055 sysload=0.41 cputime=130.428 memavail=7288880 print_time=2932.465 buffer_time=2.358 print_stall=0 extruder: target=240 temp=240.2 pwm=0.360
Stats 797707.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3716856 bytes_read=913204 bytes_retransmit=9 bytes_invalid=0 send_seq=72496 receive_seq=72496 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=3126 freq=119992887 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=565457 sysload=0.41 cputime=130.547 memavail=7288348 print_time=2933.729 buffer_time=2.621 print_stall=0 extruder: target=240 temp=240.1 pwm=0.480
Stats 797708.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3721101 bytes_read=913852 bytes_retransmit=9 bytes_invalid=0 send_seq=72570 receive_seq=72570 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2660 freq=119992881 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=566194 sysload=0.41 cputime=130.643 memavail=7289664 print_time=2934.369 buffer_time=2.261 print_stall=0 extruder: target=240 temp=240.1 pwm=0.422
Stats 797709.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3726461 bytes_read=914605 bytes_retransmit=9 bytes_invalid=0 send_seq=72662 receive_seq=72662 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1859 freq=119992879 heater_bed: target=80 temp=80.0 pwm=0.510 sd_pos=567024 sysload=0.38 cputime=130.740 memavail=7288500 print_time=2935.122 buffer_time=2.013 print_stall=0 extruder: target=240 temp=240.1 pwm=0.504
Stats 797710.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3732019 bytes_read=915376 bytes_retransmit=9 bytes_invalid=0 send_seq=72758 receive_seq=72758 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=3612 freq=119992872 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=568437 sysload=0.38 cputime=130.847 memavail=7290524 print_time=2936.385 buffer_time=2.275 print_stall=0 extruder: target=240 temp=239.9 pwm=0.511
Stats 797711.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3737865 bytes_read=916163 bytes_retransmit=9 bytes_invalid=0 send_seq=72858 receive_seq=72858 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=4171 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.507 sd_pos=569306 sysload=0.38 cputime=130.957 memavail=7289388 print_time=2937.836 buffer_time=2.725 print_stall=0 extruder: target=240 temp=240.2 pwm=0.348
Stats 797712.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3743759 bytes_read=916953 bytes_retransmit=9 bytes_invalid=0 send_seq=72959 receive_seq=72959 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=946 freq=119992862 heater_bed: target=80 temp=79.9 pwm=0.537 sd_pos=569615 sysload=0.38 cputime=131.064 memavail=7288428 print_time=2938.395 buffer_time=2.283 print_stall=0 extruder: target=240 temp=239.8 pwm=0.549
Stats 797713.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3748557 bytes_read=917669 bytes_retransmit=9 bytes_invalid=0 send_seq=73044 receive_seq=73044 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=66 freq=119992860 heater_bed: target=80 temp=79.9 pwm=0.512 sd_pos=570079 sysload=0.38 cputime=131.146 memavail=7290384 print_time=2939.420 buffer_time=2.308 print_stall=0 extruder: target=240 temp=240.1 pwm=0.437
Stats 797714.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3753149 bytes_read=918352 bytes_retransmit=9 bytes_invalid=0 send_seq=73125 receive_seq=73125 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1793 freq=119992855 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=570749 sysload=0.35 cputime=131.225 memavail=7291568 print_time=2940.738 buffer_time=2.626 print_stall=0 extruder: target=240 temp=240.1 pwm=0.437
Stats 797715.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3756708 bytes_read=918965 bytes_retransmit=9 bytes_invalid=0 send_seq=73189 receive_seq=73189 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=2525 freq=119992848 heater_bed: target=80 temp=79.9 pwm=0.481 sd_pos=571519 sysload=0.35 cputime=131.306 memavail=7292740 print_time=2941.657 buffer_time=2.544 print_stall=0 extruder: target=240 temp=240.4 pwm=0.271
Stats 797716.6: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3761364 bytes_read=919673 bytes_retransmit=9 bytes_invalid=0 send_seq=73269 receive_seq=73269 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=2237 freq=119992852 heater_bed: target=80 temp=79.9 pwm=0.491 sd_pos=572187 sysload=0.35 cputime=131.404 memavail=7290296 print_time=2942.414 buffer_time=2.300 print_stall=0 extruder: target=240 temp=240.1 pwm=0.401
Stats 797717.6: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3765987 bytes_read=920341 bytes_retransmit=9 bytes_invalid=0 send_seq=73347 receive_seq=73347 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=4858 freq=119992850 heater_bed: target=80 temp=79.9 pwm=0.491 sd_pos=573582 sysload=0.35 cputime=131.519 memavail=7294068 print_time=2943.784 buffer_time=2.669 print_stall=0 extruder: target=240 temp=240.2 pwm=0.401
Stats 797718.6: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3771658 bytes_read=921119 bytes_retransmit=9 bytes_invalid=0 send_seq=73444 receive_seq=73444 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=2809 freq=119992846 heater_bed: target=80 temp=79.9 pwm=0.409 sd_pos=574186 sysload=0.35 cputime=131.609 memavail=7295620 print_time=2944.526 buffer_time=2.409 print_stall=0 extruder: target=240 temp=239.9 pwm=0.508
Stats 797719.6: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3776814 bytes_read=921861 bytes_retransmit=9 bytes_invalid=0 send_seq=73534 receive_seq=73534 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992853 heater_bed: target=80 temp=79.9 pwm=0.476 sd_pos=574489 sysload=0.32 cputime=131.698 memavail=7293720 print_time=2945.319 buffer_time=2.202 print_stall=0 extruder: target=240 temp=239.9 pwm=0.444
Stats 797720.6: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3781181 bytes_read=922519 bytes_retransmit=9 bytes_invalid=0 send_seq=73610 receive_seq=73610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=80 temp=79.9 pwm=0.476 sd_pos=575316 sysload=0.32 cputime=131.780 memavail=7292352 print_time=2946.262 buffer_time=2.144 print_stall=0 extruder: target=240 temp=239.7 pwm=0.530
Stats 797721.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3785092 bytes_read=923183 bytes_retransmit=9 bytes_invalid=0 send_seq=73681 receive_seq=73681 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=80 temp=79.9 pwm=0.471 sd_pos=576102 sysload=0.32 cputime=131.856 memavail=7293944 print_time=2947.317 buffer_time=2.198 print_stall=0 extruder: target=240 temp=239.9 pwm=0.406
Stats 797722.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3786522 bytes_read=923640 bytes_retransmit=9 bytes_invalid=0 send_seq=73714 receive_seq=73714 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=79.9 pwm=0.471 sd_pos=576189 sysload=0.32 cputime=131.909 memavail=7292360 print_time=2948.153 buffer_time=2.033 print_stall=0 extruder: target=240 temp=240.1 pwm=0.405
Stats 797723.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3788380 bytes_read=924113 bytes_retransmit=9 bytes_invalid=0 send_seq=73753 receive_seq=73753 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992846 heater_bed: target=80 temp=79.9 pwm=0.471 sd_pos=576416 sysload=0.32 cputime=131.971 memavail=7293492 print_time=2949.498 buffer_time=2.377 print_stall=0 extruder: target=240 temp=239.8 pwm=0.514
Stats 797724.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3789662 bytes_read=924556 bytes_retransmit=9 bytes_invalid=0 send_seq=73783 receive_seq=73783 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=576445 sysload=0.29 cputime=132.027 memavail=7292372 print_time=2950.386 buffer_time=2.264 print_stall=0 extruder: target=240 temp=240.1 pwm=0.417
Stats 797725.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3792304 bytes_read=925108 bytes_retransmit=9 bytes_invalid=0 send_seq=73835 receive_seq=73835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992889 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=576696 sysload=0.29 cputime=132.089 memavail=7291924 print_time=2951.475 buffer_time=2.353 print_stall=0 extruder: target=240 temp=239.8 pwm=0.466
Stats 797726.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3795355 bytes_read=925697 bytes_retransmit=9 bytes_invalid=0 send_seq=73894 receive_seq=73894 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=577528 sysload=0.29 cputime=132.157 memavail=7290272 print_time=2952.156 buffer_time=2.033 print_stall=0 extruder: target=240 temp=239.9 pwm=0.490
Stats 797727.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3799747 bytes_read=926390 bytes_retransmit=9 bytes_invalid=0 send_seq=73974 receive_seq=73974 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119992877 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=577855 sysload=0.29 cputime=132.217 memavail=7292588 print_time=2953.208 buffer_time=2.083 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 797728.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3804555 bytes_read=927102 bytes_retransmit=9 bytes_invalid=0 send_seq=74058 receive_seq=74058 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=621 freq=119992873 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=578181 sysload=0.29 cputime=132.301 memavail=7291900 print_time=2954.419 buffer_time=2.293 print_stall=0 extruder: target=240 temp=240.0 pwm=0.438
Stats 797729.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3808678 bytes_read=927740 bytes_retransmit=9 bytes_invalid=0 send_seq=74130 receive_seq=74130 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2126 freq=119992869 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=578503 sysload=0.43 cputime=132.390 memavail=7293772 print_time=2955.629 buffer_time=2.502 print_stall=0 extruder: target=240 temp=240.0 pwm=0.435
Stats 797730.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3813112 bytes_read=928418 bytes_retransmit=9 bytes_invalid=0 send_seq=74207 receive_seq=74207 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=780 freq=119992866 heater_bed: target=80 temp=80.0 pwm=0.366 sd_pos=578669 sysload=0.43 cputime=132.474 memavail=7292400 print_time=2956.227 buffer_time=2.099 print_stall=0 extruder: target=240 temp=240.1 pwm=0.379
Stats 797731.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3817896 bytes_read=929141 bytes_retransmit=9 bytes_invalid=0 send_seq=74290 receive_seq=74290 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=2895 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=579348 sysload=0.43 cputime=132.571 memavail=7291436 print_time=2957.555 buffer_time=2.426 print_stall=0 extruder: target=240 temp=240.1 pwm=0.443
Stats 797732.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3822836 bytes_read=929849 bytes_retransmit=9 bytes_invalid=0 send_seq=74376 receive_seq=74376 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=2151 freq=119992865 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=579774 sysload=0.43 cputime=132.661 memavail=7293188 print_time=2958.247 buffer_time=2.118 print_stall=0 extruder: target=240 temp=240.0 pwm=0.443
Stats 797733.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3828085 bytes_read=930592 bytes_retransmit=9 bytes_invalid=0 send_seq=74466 receive_seq=74466 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=230 freq=119992853 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=580024 sysload=0.43 cputime=132.755 memavail=7292212 print_time=2959.438 buffer_time=2.309 print_stall=0 extruder: target=240 temp=239.8 pwm=0.560
Stats 797734.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3829163 bytes_read=931019 bytes_retransmit=9 bytes_invalid=0 send_seq=74493 receive_seq=74493 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=80.1 pwm=0.387 sd_pos=580169 sysload=0.56 cputime=132.821 memavail=7292928 print_time=2960.223 buffer_time=2.092 print_stall=0 extruder: target=240 temp=239.7 pwm=0.530
Stats 797735.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=3831170 bytes_read=931507 bytes_retransmit=9 bytes_invalid=0 send_seq=74535 receive_seq=74535 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.1 pwm=0.377 sd_pos=580470 sysload=0.56 cputime=132.891 memavail=7292484 print_time=2961.372 buffer_time=2.241 print_stall=0 extruder: target=240 temp=239.9 pwm=0.429
Stats 797736.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3833444 bytes_read=932051 bytes_retransmit=9 bytes_invalid=0 send_seq=74582 receive_seq=74582 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992853 heater_bed: target=80 temp=80.1 pwm=0.316 sd_pos=580833 sysload=0.56 cputime=132.960 memavail=7291728 print_time=2962.451 buffer_time=2.319 print_stall=0 extruder: target=240 temp=240.2 pwm=0.334
Stats 797737.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3834387 bytes_read=932483 bytes_retransmit=9 bytes_invalid=0 send_seq=74610 receive_seq=74610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992852 heater_bed: target=80 temp=80.0 pwm=0.514 sd_pos=580892 sysload=0.56 cputime=133.028 memavail=7291732 print_time=2963.334 buffer_time=2.200 print_stall=0 extruder: target=240 temp=240.2 pwm=0.368
Stats 797738.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3836400 bytes_read=932976 bytes_retransmit=9 bytes_invalid=0 send_seq=74653 receive_seq=74653 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=80.1 pwm=0.425 sd_pos=581174 sysload=0.56 cputime=133.097 memavail=7291732 print_time=2964.439 buffer_time=2.305 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 797739.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3837214 bytes_read=933379 bytes_retransmit=9 bytes_invalid=0 send_seq=74675 receive_seq=74675 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=581286 sysload=0.51 cputime=133.153 memavail=7291732 print_time=2965.202 buffer_time=2.068 print_stall=0 extruder: target=240 temp=239.9 pwm=0.531
Stats 797740.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3840281 bytes_read=933981 bytes_retransmit=9 bytes_invalid=0 send_seq=74737 receive_seq=74737 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=80.0 pwm=0.520 sd_pos=581635 sysload=0.51 cputime=133.235 memavail=7291732 print_time=2966.297 buffer_time=2.162 print_stall=0 extruder: target=240 temp=239.8 pwm=0.554
Stats 797741.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3842384 bytes_read=934489 bytes_retransmit=9 bytes_invalid=0 send_seq=74780 receive_seq=74780 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=582160 sysload=0.51 cputime=133.314 memavail=7291732 print_time=2967.376 buffer_time=2.240 print_stall=0 extruder: target=240 temp=239.9 pwm=0.491
Stats 797742.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3844371 bytes_read=934992 bytes_retransmit=9 bytes_invalid=0 send_seq=74822 receive_seq=74822 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=582600 sysload=0.51 cputime=133.384 memavail=7291732 print_time=2968.361 buffer_time=2.223 print_stall=0 extruder: target=240 temp=239.9 pwm=0.491
Stats 797743.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3847514 bytes_read=935589 bytes_retransmit=9 bytes_invalid=0 send_seq=74883 receive_seq=74883 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992829 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=583204 sysload=0.51 cputime=133.468 memavail=7291508 print_time=2969.702 buffer_time=2.564 print_stall=0 extruder: target=240 temp=239.9 pwm=0.445
Stats 797744.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3849112 bytes_read=936037 bytes_retransmit=9 bytes_invalid=0 send_seq=74917 receive_seq=74917 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=583569 sysload=0.47 cputime=133.536 memavail=7291512 print_time=2970.224 buffer_time=2.085 print_stall=0 extruder: target=240 temp=239.9 pwm=0.445
Stats 797745.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=3852654 bytes_read=936665 bytes_retransmit=9 bytes_invalid=0 send_seq=74984 receive_seq=74984 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=80.1 pwm=0.426 sd_pos=584166 sysload=0.47 cputime=133.618 memavail=7291512 print_time=2971.227 buffer_time=2.088 print_stall=0 extruder: target=240 temp=240.3 pwm=0.370
Stats 797746.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3858112 bytes_read=937456 bytes_retransmit=9 bytes_invalid=0 send_seq=75081 receive_seq=75081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1639 freq=119992823 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=585587 sysload=0.47 cputime=133.739 memavail=7291512 print_time=2972.617 buffer_time=2.475 print_stall=0 extruder: target=240 temp=240.3 pwm=0.383
Stats 797747.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3861636 bytes_read=938037 bytes_retransmit=9 bytes_invalid=0 send_seq=75143 receive_seq=75143 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=1652 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.545 sd_pos=586265 sysload=0.47 cputime=133.849 memavail=7291512 print_time=2973.274 buffer_time=2.132 print_stall=0 extruder: target=240 temp=239.9 pwm=0.558
Stats 797748.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3866861 bytes_read=938768 bytes_retransmit=9 bytes_invalid=0 send_seq=75232 receive_seq=75232 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=3650 freq=119992858 heater_bed: target=80 temp=80.0 pwm=0.515 sd_pos=587722 sysload=0.47 cputime=133.981 memavail=7291512 print_time=2974.714 buffer_time=2.571 print_stall=0 extruder: target=240 temp=240.0 pwm=0.406
Stats 797749.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3872167 bytes_read=939510 bytes_retransmit=9 bytes_invalid=0 send_seq=75322 receive_seq=75322 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=1095 freq=119992855 heater_bed: target=80 temp=80.0 pwm=0.515 sd_pos=587900 sysload=0.43 cputime=134.088 memavail=7291512 print_time=2975.353 buffer_time=2.210 print_stall=0 extruder: target=240 temp=240.1 pwm=0.323
Stats 797750.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3877195 bytes_read=940218 bytes_retransmit=9 bytes_invalid=0 send_seq=75408 receive_seq=75408 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=3321 freq=119992855 heater_bed: target=80 temp=80.0 pwm=0.386 sd_pos=589380 sysload=0.43 cputime=134.214 memavail=7291512 print_time=2976.663 buffer_time=2.518 print_stall=0 extruder: target=240 temp=240.0 pwm=0.420
Stats 797751.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3882111 bytes_read=940957 bytes_retransmit=9 bytes_invalid=0 send_seq=75494 receive_seq=75494 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2184 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=590206 sysload=0.43 cputime=134.333 memavail=7291512 print_time=2977.307 buffer_time=2.162 print_stall=0 extruder: target=240 temp=240.0 pwm=0.450
Stats 797752.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3887409 bytes_read=941709 bytes_retransmit=9 bytes_invalid=0 send_seq=75586 receive_seq=75586 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=3595 freq=119992845 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=591691 sysload=0.43 cputime=134.454 memavail=7291512 print_time=2978.610 buffer_time=2.464 print_stall=0 extruder: target=240 temp=240.1 pwm=0.436
Stats 797753.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3893126 bytes_read=942472 bytes_retransmit=9 bytes_invalid=0 send_seq=75683 receive_seq=75683 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=1114 freq=119992843 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=592431 sysload=0.43 cputime=134.565 memavail=7291064 print_time=2979.186 buffer_time=2.039 print_stall=0 extruder: target=240 temp=239.9 pwm=0.527
Stats 797754.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3898522 bytes_read=943220 bytes_retransmit=9 bytes_invalid=0 send_seq=75774 receive_seq=75774 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=2331 freq=119992840 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=593721 sysload=0.48 cputime=134.686 memavail=7293148 print_time=2980.638 buffer_time=2.490 print_stall=0 extruder: target=240 temp=240.1 pwm=0.386
Stats 797755.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3903597 bytes_read=943947 bytes_retransmit=9 bytes_invalid=0 send_seq=75861 receive_seq=75861 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=64 freq=119992832 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=593863 sysload=0.48 cputime=134.776 memavail=7292460 print_time=2981.171 buffer_time=2.022 print_stall=0 extruder: target=240 temp=240.0 pwm=0.489
Stats 797756.6: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3907884 bytes_read=944621 bytes_retransmit=9 bytes_invalid=0 send_seq=75937 receive_seq=75937 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=1108 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=594586 sysload=0.48 cputime=134.870 memavail=7291716 print_time=2982.505 buffer_time=2.355 print_stall=0 extruder: target=240 temp=240.1 pwm=0.423
Stats 797757.6: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3912911 bytes_read=945349 bytes_retransmit=9 bytes_invalid=0 send_seq=76024 receive_seq=76024 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1154 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.393 sd_pos=595767 sysload=0.48 cputime=134.975 memavail=7291716 print_time=2983.757 buffer_time=2.607 print_stall=0 extruder: target=240 temp=239.8 pwm=0.536
Stats 797758.6: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3916089 bytes_read=945936 bytes_retransmit=9 bytes_invalid=0 send_seq=76083 receive_seq=76083 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=80.0 pwm=0.393 sd_pos=595889 sysload=0.48 cputime=135.051 memavail=7291716 print_time=2984.254 buffer_time=2.103 print_stall=0 extruder: target=240 temp=239.9 pwm=0.469
Stats 797759.6: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3920696 bytes_read=946619 bytes_retransmit=9 bytes_invalid=0 send_seq=76164 receive_seq=76164 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992824 heater_bed: target=80 temp=80.0 pwm=0.393 sd_pos=596228 sysload=0.44 cputime=135.137 memavail=7291716 print_time=2985.222 buffer_time=2.070 print_stall=0 extruder: target=240 temp=239.9 pwm=0.436
Stats 797760.6: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3925007 bytes_read=947292 bytes_retransmit=9 bytes_invalid=0 send_seq=76240 receive_seq=76240 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1632 freq=119992860 heater_bed: target=80 temp=80.1 pwm=0.444 sd_pos=597118 sysload=0.44 cputime=135.232 memavail=7291716 print_time=2986.419 buffer_time=2.267 print_stall=0 extruder: target=240 temp=239.9 pwm=0.436
Stats 797761.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3929639 bytes_read=948000 bytes_retransmit=9 bytes_invalid=0 send_seq=76320 receive_seq=76320 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1329 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=597396 sysload=0.44 cputime=135.326 memavail=7291716 print_time=2987.166 buffer_time=2.014 print_stall=0 extruder: target=240 temp=239.9 pwm=0.485
Stats 797762.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3934725 bytes_read=948713 bytes_retransmit=9 bytes_invalid=0 send_seq=76407 receive_seq=76407 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=3762 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.517 sd_pos=599043 sysload=0.44 cputime=135.443 memavail=7291716 print_time=2988.907 buffer_time=2.754 print_stall=0 extruder: target=240 temp=240.3 pwm=0.297
Stats 797763.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3940449 bytes_read=949507 bytes_retransmit=9 bytes_invalid=0 send_seq=76505 receive_seq=76505 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=829 freq=119992867 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=599653 sysload=0.44 cputime=135.548 memavail=7291716 print_time=2989.449 buffer_time=2.295 print_stall=0 extruder: target=240 temp=240.1 pwm=0.407
Stats 797764.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3943110 bytes_read=950049 bytes_retransmit=9 bytes_invalid=0 send_seq=76555 receive_seq=76555 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992904 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=599773 sysload=0.40 cputime=135.620 memavail=7291528 print_time=2990.083 buffer_time=1.928 print_stall=0 extruder: target=240 temp=239.9 pwm=0.498
Stats 797765.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3944675 bytes_read=950507 bytes_retransmit=9 bytes_invalid=0 send_seq=76591 receive_seq=76591 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=80 temp=80.0 pwm=0.566 sd_pos=599921 sysload=0.40 cputime=135.682 memavail=7291684 print_time=2991.183 buffer_time=2.029 print_stall=0 extruder: target=240 temp=240.0 pwm=0.458
Stats 797766.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3946536 bytes_read=951006 bytes_retransmit=9 bytes_invalid=0 send_seq=76629 receive_seq=76629 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992885 heater_bed: target=80 temp=79.9 pwm=0.540 sd_pos=600175 sysload=0.40 cputime=135.738 memavail=7291180 print_time=2992.241 buffer_time=2.087 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 797767.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3948565 bytes_read=951513 bytes_retransmit=9 bytes_invalid=0 send_seq=76672 receive_seq=76672 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992881 heater_bed: target=80 temp=79.9 pwm=0.507 sd_pos=600329 sysload=0.40 cputime=135.800 memavail=7291180 print_time=2993.718 buffer_time=2.563 print_stall=0 extruder: target=240 temp=240.1 pwm=0.425
Stats 797768.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3950942 bytes_read=952031 bytes_retransmit=9 bytes_invalid=0 send_seq=76720 receive_seq=76720 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992890 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=600624 sysload=0.40 cputime=135.863 memavail=7291180 print_time=2994.310 buffer_time=2.154 print_stall=0 extruder: target=240 temp=240.0 pwm=0.500
Stats 797769.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3954793 bytes_read=952713 bytes_retransmit=9 bytes_invalid=0 send_seq=76795 receive_seq=76795 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992883 heater_bed: target=80 temp=79.9 pwm=0.489 sd_pos=601586 sysload=0.37 cputime=135.937 memavail=7291180 print_time=2995.184 buffer_time=2.026 print_stall=0 extruder: target=240 temp=239.9 pwm=0.440
Stats 797770.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=3959419 bytes_read=953411 bytes_retransmit=9 bytes_invalid=0 send_seq=76879 receive_seq=76879 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=79.9 pwm=0.489 sd_pos=601927 sysload=0.37 cputime=135.995 memavail=7291180 print_time=2996.539 buffer_time=2.378 print_stall=0 extruder: target=240 temp=240.2 pwm=0.375
Stats 797771.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3962583 bytes_read=954000 bytes_retransmit=9 bytes_invalid=0 send_seq=76938 receive_seq=76938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992873 heater_bed: target=80 temp=79.9 pwm=0.435 sd_pos=602157 sysload=0.37 cputime=136.039 memavail=7291180 print_time=2997.444 buffer_time=2.282 print_stall=0 extruder: target=240 temp=239.8 pwm=0.558
Stats 797772.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3965769 bytes_read=954617 bytes_retransmit=9 bytes_invalid=0 send_seq=77000 receive_seq=77000 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992868 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=602387 sysload=0.37 cputime=136.093 memavail=7291180 print_time=2998.348 buffer_time=2.187 print_stall=0 extruder: target=240 temp=240.0 pwm=0.409
Stats 797773.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3968816 bytes_read=955195 bytes_retransmit=9 bytes_invalid=0 send_seq=77060 receive_seq=77060 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992861 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=602616 sysload=0.37 cputime=136.155 memavail=7291180 print_time=2999.253 buffer_time=2.091 print_stall=0 extruder: target=240 temp=240.2 pwm=0.322
Stats 797774.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3972542 bytes_read=955768 bytes_retransmit=9 bytes_invalid=0 send_seq=77131 receive_seq=77119 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=598 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.0 pwm=0.344 sd_pos=602962 sysload=0.34 cputime=136.219 memavail=7291180 print_time=3000.611 buffer_time=2.448 print_stall=0 extruder: target=240 temp=240.2 pwm=0.339
Stats 797775.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=3976409 bytes_read=956505 bytes_retransmit=9 bytes_invalid=0 send_seq=77205 receive_seq=77205 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=603449 sysload=0.34 cputime=136.285 memavail=7291180 print_time=3001.315 buffer_time=2.151 print_stall=0 extruder: target=240 temp=240.0 pwm=0.432
Stats 797776.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=3981330 bytes_read=957244 bytes_retransmit=9 bytes_invalid=0 send_seq=77294 receive_seq=77294 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=268 freq=119992845 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=603956 sysload=0.34 cputime=136.371 memavail=7291164 print_time=3002.435 buffer_time=2.271 print_stall=0 extruder: target=240 temp=239.7 pwm=0.567
Stats 797777.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=3984477 bytes_read=957807 bytes_retransmit=9 bytes_invalid=0 send_seq=77351 receive_seq=77351 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=80.0 pwm=0.384 sd_pos=604227 sysload=0.34 cputime=136.449 memavail=7291216 print_time=3003.239 buffer_time=2.074 print_stall=0 extruder: target=240 temp=239.8 pwm=0.454
Stats 797778.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=3986515 bytes_read=958324 bytes_retransmit=9 bytes_invalid=0 send_seq=77393 receive_seq=77393 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992846 heater_bed: target=80 temp=80.1 pwm=0.320 sd_pos=604409 sysload=0.34 cputime=136.507 memavail=7291216 print_time=3004.305 buffer_time=2.140 print_stall=0 extruder: target=240 temp=239.8 pwm=0.483
Stats 797779.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=3988656 bytes_read=958822 bytes_retransmit=9 bytes_invalid=0 send_seq=77437 receive_seq=77437 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992839 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=604631 sysload=0.31 cputime=136.563 memavail=7290992 print_time=3005.538 buffer_time=2.372 print_stall=0 extruder: target=240 temp=240.2 pwm=0.344
Stats 797780.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=3989701 bytes_read=959235 bytes_retransmit=9 bytes_invalid=0 send_seq=77464 receive_seq=77464 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992835 heater_bed: target=80 temp=80.1 pwm=0.331 sd_pos=604854 sysload=0.31 cputime=136.614 memavail=7290992 print_time=3006.267 buffer_time=2.100 print_stall=0 extruder: target=240 temp=240.4 pwm=0.259
Stats 797781.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3991507 bytes_read=959758 bytes_retransmit=9 bytes_invalid=0 send_seq=77504 receive_seq=77504 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=80.1 pwm=0.390 sd_pos=605037 sysload=0.31 cputime=136.674 memavail=7290992 print_time=3007.253 buffer_time=2.085 print_stall=0 extruder: target=240 temp=240.2 pwm=0.402
Stats 797782.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3992778 bytes_read=960182 bytes_retransmit=9 bytes_invalid=0 send_seq=77534 receive_seq=77534 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=80.0 pwm=0.526 sd_pos=605294 sysload=0.31 cputime=136.734 memavail=7290992 print_time=3008.539 buffer_time=2.371 print_stall=0 extruder: target=240 temp=240.2 pwm=0.402
Stats 797783.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3994065 bytes_read=960598 bytes_retransmit=9 bytes_invalid=0 send_seq=77563 receive_seq=77563 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992868 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=605407 sysload=0.31 cputime=136.795 memavail=7290992 print_time=3009.716 buffer_time=2.547 print_stall=0 extruder: target=240 temp=239.9 pwm=0.549
Stats 797784.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3996382 bytes_read=961133 bytes_retransmit=9 bytes_invalid=0 send_seq=77610 receive_seq=77610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992861 heater_bed: target=80 temp=80.0 pwm=0.534 sd_pos=605647 sysload=0.29 cputime=136.855 memavail=7290992 print_time=3010.472 buffer_time=2.303 print_stall=0 extruder: target=240 temp=239.7 pwm=0.565
Stats 797785.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=3998806 bytes_read=961661 bytes_retransmit=9 bytes_invalid=0 send_seq=77660 receive_seq=77660 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=80.1 pwm=0.407 sd_pos=606059 sysload=0.29 cputime=136.916 memavail=7290992 print_time=3011.609 buffer_time=2.439 print_stall=0 extruder: target=240 temp=239.8 pwm=0.469
Stats 797786.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4001313 bytes_read=962204 bytes_retransmit=9 bytes_invalid=0 send_seq=77710 receive_seq=77710 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=606653 sysload=0.29 cputime=136.983 memavail=7290488 print_time=3012.867 buffer_time=2.696 print_stall=0 extruder: target=240 temp=240.1 pwm=0.347
Stats 797787.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4002066 bytes_read=962626 bytes_retransmit=9 bytes_invalid=0 send_seq=77733 receive_seq=77733 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=80.0 pwm=0.396 sd_pos=606766 sysload=0.29 cputime=137.042 memavail=7290488 print_time=3013.202 buffer_time=2.030 print_stall=0 extruder: target=240 temp=239.9 pwm=0.480
Stats 797788.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4004571 bytes_read=963154 bytes_retransmit=9 bytes_invalid=0 send_seq=77783 receive_seq=77783 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=607153 sysload=0.29 cputime=137.101 memavail=7290488 print_time=3014.190 buffer_time=2.016 print_stall=0 extruder: target=240 temp=240.0 pwm=0.441
Stats 797789.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4009894 bytes_read=963912 bytes_retransmit=9 bytes_invalid=0 send_seq=77879 receive_seq=77879 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=608156 sysload=0.35 cputime=137.183 memavail=7290488 print_time=3015.843 buffer_time=2.668 print_stall=0 extruder: target=240 temp=240.2 pwm=0.363
Stats 797790.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4013839 bytes_read=964589 bytes_retransmit=9 bytes_invalid=0 send_seq=77953 receive_seq=77953 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=31 freq=119992844 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=608937 sysload=0.35 cputime=137.270 memavail=7290488 print_time=3016.594 buffer_time=2.419 print_stall=0 extruder: target=240 temp=240.0 pwm=0.416
Stats 797791.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4016628 bytes_read=965148 bytes_retransmit=9 bytes_invalid=0 send_seq=78006 receive_seq=78006 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=668 freq=119992845 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=609630 sysload=0.35 cputime=137.351 memavail=7290488 print_time=3017.241 buffer_time=2.065 print_stall=0 extruder: target=240 temp=239.9 pwm=0.490
Stats 797792.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4021269 bytes_read=965826 bytes_retransmit=9 bytes_invalid=0 send_seq=78086 receive_seq=78086 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2818 freq=119992839 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=610867 sysload=0.35 cputime=137.461 memavail=7290488 print_time=3018.627 buffer_time=2.451 print_stall=0 extruder: target=240 temp=239.9 pwm=0.439
Stats 797793.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4026463 bytes_read=966578 bytes_retransmit=9 bytes_invalid=0 send_seq=78175 receive_seq=78175 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1438 freq=119992838 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=611633 sysload=0.35 cputime=137.568 memavail=7290488 print_time=3019.349 buffer_time=2.172 print_stall=0 extruder: target=240 temp=239.9 pwm=0.414
Stats 797794.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4031905 bytes_read=967321 bytes_retransmit=9 bytes_invalid=0 send_seq=78269 receive_seq=78268 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=452 freq=119992841 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=612007 sysload=0.32 cputime=137.677 memavail=7290636 print_time=3020.340 buffer_time=2.162 print_stall=0 extruder: target=240 temp=240.0 pwm=0.413
Stats 797795.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4035398 bytes_read=967960 bytes_retransmit=9 bytes_invalid=0 send_seq=78334 receive_seq=78334 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=612205 sysload=0.32 cputime=137.761 memavail=7290720 print_time=3021.205 buffer_time=2.027 print_stall=0 extruder: target=240 temp=240.0 pwm=0.422
Stats 797796.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4037902 bytes_read=968502 bytes_retransmit=9 bytes_invalid=0 send_seq=78384 receive_seq=78384 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=612516 sysload=0.32 cputime=137.842 memavail=7290468 print_time=3022.210 buffer_time=2.031 print_stall=0 extruder: target=240 temp=240.0 pwm=0.471
Stats 797797.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4043792 bytes_read=969315 bytes_retransmit=9 bytes_invalid=0 send_seq=78491 receive_seq=78491 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=613183 sysload=0.32 cputime=137.925 memavail=7290480 print_time=3023.457 buffer_time=2.278 print_stall=0 extruder: target=240 temp=240.1 pwm=0.430
Stats 797798.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4047260 bytes_read=969938 bytes_retransmit=9 bytes_invalid=0 send_seq=78557 receive_seq=78557 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=590 freq=119992838 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=613914 sysload=0.32 cputime=138.012 memavail=7290480 print_time=3024.333 buffer_time=2.153 print_stall=0 extruder: target=240 temp=240.3 pwm=0.364
Stats 797799.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4051819 bytes_read=970620 bytes_retransmit=9 bytes_invalid=0 send_seq=78635 receive_seq=78635 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=2870 freq=119992832 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=615454 sysload=0.29 cputime=138.132 memavail=7290480 print_time=3025.590 buffer_time=2.410 print_stall=0 extruder: target=240 temp=239.9 pwm=0.471
Stats 797800.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4056532 bytes_read=971324 bytes_retransmit=9 bytes_invalid=0 send_seq=78717 receive_seq=78717 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1819 freq=119992827 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=616200 sysload=0.29 cputime=138.240 memavail=7290256 print_time=3026.224 buffer_time=2.043 print_stall=0 extruder: target=240 temp=240.0 pwm=0.430
Stats 797801.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4062177 bytes_read=972102 bytes_retransmit=9 bytes_invalid=0 send_seq=78814 receive_seq=78814 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=2671 freq=119992835 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=617740 sysload=0.29 cputime=138.375 memavail=7290256 print_time=3027.475 buffer_time=2.292 print_stall=0 extruder: target=240 temp=240.1 pwm=0.425
Stats 797802.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4067891 bytes_read=972879 bytes_retransmit=9 bytes_invalid=0 send_seq=78911 receive_seq=78911 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=3312 freq=119992833 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=618728 sysload=0.29 cputime=138.498 memavail=7290256 print_time=3028.865 buffer_time=2.681 print_stall=0 extruder: target=240 temp=240.3 pwm=0.368
Stats 797803.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4073179 bytes_read=973612 bytes_retransmit=9 bytes_invalid=0 send_seq=79002 receive_seq=79002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=396 freq=119992826 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=618866 sysload=0.29 cputime=138.600 memavail=7290256 print_time=3029.248 buffer_time=2.064 print_stall=0 extruder: target=240 temp=239.9 pwm=0.504
Stats 797804.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4077828 bytes_read=974300 bytes_retransmit=9 bytes_invalid=0 send_seq=79081 receive_seq=79081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119992825 heater_bed: target=80 temp=80.1 pwm=0.371 sd_pos=619258 sysload=0.43 cputime=138.705 memavail=7290256 print_time=3030.426 buffer_time=2.242 print_stall=0 extruder: target=240 temp=239.8 pwm=0.511
Stats 797805.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4082382 bytes_read=974997 bytes_retransmit=9 bytes_invalid=0 send_seq=79162 receive_seq=79162 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119992870 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=619703 sysload=0.43 cputime=138.797 memavail=7290256 print_time=3031.429 buffer_time=2.244 print_stall=0 extruder: target=240 temp=240.0 pwm=0.457
Stats 797806.7: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4086513 bytes_read=975656 bytes_retransmit=9 bytes_invalid=0 send_seq=79235 receive_seq=79235 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1008 freq=119992868 heater_bed: target=80 temp=80.0 pwm=0.506 sd_pos=620685 sysload=0.43 cputime=138.902 memavail=7290032 print_time=3032.572 buffer_time=2.386 print_stall=0 extruder: target=240 temp=240.1 pwm=0.426
Stats 797807.7: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4089124 bytes_read=976199 bytes_retransmit=9 bytes_invalid=0 send_seq=79285 receive_seq=79285 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992861 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=620911 sysload=0.43 cputime=138.979 memavail=7290032 print_time=3033.429 buffer_time=2.242 print_stall=0 extruder: target=240 temp=239.9 pwm=0.485
Stats 797808.7: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4090314 bytes_read=976626 bytes_retransmit=9 bytes_invalid=0 send_seq=79312 receive_seq=79312 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=620970 sysload=0.43 cputime=139.038 memavail=7290032 print_time=3034.206 buffer_time=2.018 print_stall=0 extruder: target=240 temp=240.1 pwm=0.419
Stats 797809.7: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4091798 bytes_read=977064 bytes_retransmit=9 bytes_invalid=0 send_seq=79344 receive_seq=79344 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992856 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=621252 sysload=0.39 cputime=139.096 memavail=7290032 print_time=3035.304 buffer_time=2.114 print_stall=0 extruder: target=240 temp=240.1 pwm=0.366
Stats 797810.7: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4093367 bytes_read=977532 bytes_retransmit=9 bytes_invalid=0 send_seq=79379 receive_seq=79379 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=621368 sysload=0.39 cputime=139.161 memavail=7289232 print_time=3036.282 buffer_time=2.091 print_stall=0 extruder: target=240 temp=240.0 pwm=0.478
Stats 797811.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4096304 bytes_read=978120 bytes_retransmit=9 bytes_invalid=0 send_seq=79435 receive_seq=79435 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992877 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=621831 sysload=0.39 cputime=139.195 memavail=7289008 print_time=3037.775 buffer_time=2.583 print_stall=0 extruder: target=240 temp=240.0 pwm=0.414
Stats 797812.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4099866 bytes_read=978738 bytes_retransmit=9 bytes_invalid=0 send_seq=79503 receive_seq=79503 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992866 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=622511 sysload=0.39 cputime=139.259 memavail=7289008 print_time=3038.519 buffer_time=2.327 print_stall=0 extruder: target=240 temp=239.8 pwm=0.540
Stats 797813.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4103824 bytes_read=979406 bytes_retransmit=9 bytes_invalid=0 send_seq=79578 receive_seq=79578 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=1019 freq=119992861 heater_bed: target=80 temp=79.9 pwm=0.579 sd_pos=623552 sysload=0.39 cputime=139.328 memavail=7289008 print_time=3039.553 buffer_time=2.360 print_stall=0 extruder: target=240 temp=239.7 pwm=0.572
Stats 797814.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4107958 bytes_read=980058 bytes_retransmit=9 bytes_invalid=0 send_seq=79650 receive_seq=79650 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=1274 freq=119992858 heater_bed: target=80 temp=80.0 pwm=0.499 sd_pos=624382 sysload=0.36 cputime=139.386 memavail=7289008 print_time=3040.438 buffer_time=2.244 print_stall=0 extruder: target=240 temp=239.7 pwm=0.506
Stats 797815.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4112696 bytes_read=980746 bytes_retransmit=9 bytes_invalid=0 send_seq=79732 receive_seq=79732 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2226 freq=119992903 heater_bed: target=80 temp=79.9 pwm=0.499 sd_pos=625495 sysload=0.36 cputime=139.485 memavail=7289008 print_time=3041.558 buffer_time=2.364 print_stall=0 extruder: target=240 temp=239.6 pwm=0.506
Stats 797816.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4117492 bytes_read=981470 bytes_retransmit=9 bytes_invalid=0 send_seq=79815 receive_seq=79815 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=1554 freq=119992900 heater_bed: target=80 temp=79.9 pwm=0.499 sd_pos=626083 sysload=0.36 cputime=139.575 memavail=7289008 print_time=3042.525 buffer_time=2.331 print_stall=0 extruder: target=240 temp=239.6 pwm=0.506
Stats 797817.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4120625 bytes_read=982047 bytes_retransmit=9 bytes_invalid=0 send_seq=79872 receive_seq=79872 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992893 heater_bed: target=80 temp=79.9 pwm=0.542 sd_pos=626247 sysload=0.36 cputime=139.643 memavail=7289008 print_time=3043.346 buffer_time=2.150 print_stall=0 extruder: target=240 temp=239.7 pwm=0.471
Stats 797818.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4122788 bytes_read=982549 bytes_retransmit=9 bytes_invalid=0 send_seq=79918 receive_seq=79918 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992888 heater_bed: target=80 temp=79.9 pwm=0.525 sd_pos=626548 sysload=0.36 cputime=139.693 memavail=7289008 print_time=3044.787 buffer_time=2.592 print_stall=0 extruder: target=240 temp=239.7 pwm=0.539
Stats 797819.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4123892 bytes_read=982964 bytes_retransmit=9 bytes_invalid=0 send_seq=79944 receive_seq=79944 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992944 heater_bed: target=80 temp=79.9 pwm=0.525 sd_pos=626686 sysload=0.49 cputime=139.747 memavail=7289008 print_time=3045.562 buffer_time=2.365 print_stall=0 extruder: target=240 temp=239.6 pwm=0.544
Stats 797820.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4125189 bytes_read=983407 bytes_retransmit=9 bytes_invalid=0 send_seq=79975 receive_seq=79975 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992933 heater_bed: target=80 temp=79.9 pwm=0.505 sd_pos=626827 sysload=0.49 cputime=139.807 memavail=7289012 print_time=3046.775 buffer_time=2.578 print_stall=0 extruder: target=240 temp=239.7 pwm=0.548
Stats 797821.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4128204 bytes_read=984001 bytes_retransmit=9 bytes_invalid=0 send_seq=80035 receive_seq=80035 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=80 temp=79.9 pwm=0.499 sd_pos=627157 sysload=0.49 cputime=139.871 memavail=7289012 print_time=3047.622 buffer_time=2.425 print_stall=0 extruder: target=240 temp=239.7 pwm=0.544
Stats 797822.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4132205 bytes_read=984664 bytes_retransmit=9 bytes_invalid=0 send_seq=80109 receive_seq=80109 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=80 temp=79.9 pwm=0.499 sd_pos=627908 sysload=0.49 cputime=139.930 memavail=7289012 print_time=3048.412 buffer_time=2.214 print_stall=0 extruder: target=240 temp=239.7 pwm=0.544
Stats 797823.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4135936 bytes_read=985311 bytes_retransmit=9 bytes_invalid=0 send_seq=80180 receive_seq=80180 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=1900 freq=119992904 heater_bed: target=80 temp=79.9 pwm=0.424 sd_pos=628910 sysload=0.49 cputime=140.009 memavail=7289012 print_time=3049.629 buffer_time=2.430 print_stall=0 extruder: target=240 temp=239.9 pwm=0.394
Stats 797824.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4140704 bytes_read=985999 bytes_retransmit=9 bytes_invalid=0 send_seq=80262 receive_seq=80262 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=791 freq=119992892 heater_bed: target=80 temp=79.8 pwm=0.510 sd_pos=629551 sysload=0.45 cputime=140.111 memavail=7292264 print_time=3050.381 buffer_time=2.182 print_stall=0 extruder: target=240 temp=240.0 pwm=0.471
Stats 797825.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4145459 bytes_read=986702 bytes_retransmit=9 bytes_invalid=0 send_seq=80344 receive_seq=80344 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=1861 freq=119992888 heater_bed: target=80 temp=79.8 pwm=0.547 sd_pos=630540 sysload=0.45 cputime=140.221 memavail=7292268 print_time=3051.702 buffer_time=2.502 print_stall=0 extruder: target=240 temp=240.0 pwm=0.427
Stats 797826.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4149827 bytes_read=987411 bytes_retransmit=9 bytes_invalid=0 send_seq=80422 receive_seq=80422 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992883 heater_bed: target=80 temp=79.9 pwm=0.468 sd_pos=631123 sysload=0.45 cputime=140.304 memavail=7291512 print_time=3052.769 buffer_time=2.569 print_stall=0 extruder: target=240 temp=240.0 pwm=0.390
Stats 797827.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4150865 bytes_read=987824 bytes_retransmit=9 bytes_invalid=0 send_seq=80449 receive_seq=80449 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=79.9 pwm=0.481 sd_pos=631236 sysload=0.45 cputime=140.358 memavail=7291512 print_time=3053.304 buffer_time=2.103 print_stall=0 extruder: target=240 temp=239.9 pwm=0.465
Stats 797828.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4152257 bytes_read=988277 bytes_retransmit=9 bytes_invalid=0 send_seq=80481 receive_seq=80481 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992888 heater_bed: target=80 temp=79.9 pwm=0.461 sd_pos=631324 sysload=0.45 cputime=140.417 memavail=7291512 print_time=3054.392 buffer_time=2.191 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 797829.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4153490 bytes_read=988709 bytes_retransmit=9 bytes_invalid=0 send_seq=80509 receive_seq=80509 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992879 heater_bed: target=80 temp=79.9 pwm=0.461 sd_pos=631549 sysload=0.42 cputime=140.472 memavail=7291512 print_time=3055.460 buffer_time=2.258 print_stall=0 extruder: target=240 temp=240.1 pwm=0.428
Stats 797830.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4155003 bytes_read=989167 bytes_retransmit=9 bytes_invalid=0 send_seq=80542 receive_seq=80542 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=79.9 pwm=0.461 sd_pos=631665 sysload=0.42 cputime=140.526 memavail=7291512 print_time=3056.434 buffer_time=2.231 print_stall=0 extruder: target=240 temp=240.0 pwm=0.486
Stats 797831.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4157948 bytes_read=989750 bytes_retransmit=9 bytes_invalid=0 send_seq=80600 receive_seq=80600 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992925 heater_bed: target=80 temp=79.9 pwm=0.463 sd_pos=632123 sysload=0.42 cputime=140.590 memavail=7291512 print_time=3057.895 buffer_time=2.692 print_stall=0 extruder: target=240 temp=240.0 pwm=0.498
Stats 797832.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4159783 bytes_read=990237 bytes_retransmit=9 bytes_invalid=0 send_seq=80639 receive_seq=80639 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=80 temp=79.9 pwm=0.463 sd_pos=632495 sysload=0.42 cputime=140.644 memavail=7291512 print_time=3058.274 buffer_time=2.070 print_stall=0 extruder: target=240 temp=239.7 pwm=0.586
Stats 797833.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4165153 bytes_read=991000 bytes_retransmit=9 bytes_invalid=0 send_seq=80736 receive_seq=80736 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992901 heater_bed: target=80 temp=79.9 pwm=0.456 sd_pos=633550 sysload=0.42 cputime=140.728 memavail=7291512 print_time=3059.385 buffer_time=2.181 print_stall=0 extruder: target=240 temp=239.7 pwm=0.547
Stats 797834.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4169003 bytes_read=991638 bytes_retransmit=9 bytes_invalid=0 send_seq=80805 receive_seq=80805 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=51 upcoming_bytes=1024 freq=119992894 heater_bed: target=80 temp=79.9 pwm=0.507 sd_pos=634578 sysload=0.38 cputime=140.823 memavail=7291512 print_time=3060.409 buffer_time=2.204 print_stall=0 extruder: target=240 temp=239.8 pwm=0.551
Stats 797835.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4173682 bytes_read=992351 bytes_retransmit=9 bytes_invalid=0 send_seq=80886 receive_seq=80886 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=935 freq=119992884 heater_bed: target=80 temp=79.9 pwm=0.507 sd_pos=635348 sysload=0.38 cputime=140.921 memavail=7291512 print_time=3061.275 buffer_time=2.069 print_stall=0 extruder: target=240 temp=240.1 pwm=0.424
Stats 797836.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4178676 bytes_read=993059 bytes_retransmit=9 bytes_invalid=0 send_seq=80972 receive_seq=80972 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=2398 freq=119992878 heater_bed: target=80 temp=79.9 pwm=0.501 sd_pos=636333 sysload=0.38 cputime=141.024 memavail=7290784 print_time=3062.620 buffer_time=2.413 print_stall=0 extruder: target=240 temp=240.1 pwm=0.470
Stats 797837.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4183809 bytes_read=993797 bytes_retransmit=9 bytes_invalid=0 send_seq=81061 receive_seq=81061 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=125 freq=119992871 heater_bed: target=80 temp=79.9 pwm=0.450 sd_pos=636513 sysload=0.38 cputime=141.112 memavail=7290340 print_time=3063.386 buffer_time=2.179 print_stall=0 extruder: target=240 temp=240.1 pwm=0.461
Stats 797838.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4186342 bytes_read=994334 bytes_retransmit=9 bytes_invalid=0 send_seq=81110 receive_seq=81110 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992866 heater_bed: target=80 temp=79.9 pwm=0.475 sd_pos=636758 sysload=0.38 cputime=141.179 memavail=7290340 print_time=3064.531 buffer_time=2.324 print_stall=0 extruder: target=240 temp=239.9 pwm=0.528
Stats 797839.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4187633 bytes_read=994767 bytes_retransmit=9 bytes_invalid=0 send_seq=81141 receive_seq=81141 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992858 heater_bed: target=80 temp=79.8 pwm=0.544 sd_pos=636813 sysload=0.59 cputime=141.240 memavail=7290340 print_time=3065.410 buffer_time=2.203 print_stall=0 extruder: target=240 temp=240.0 pwm=0.502
Stats 797840.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4189360 bytes_read=995266 bytes_retransmit=9 bytes_invalid=0 send_seq=81179 receive_seq=81179 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992882 heater_bed: target=80 temp=79.8 pwm=0.544 sd_pos=637100 sysload=0.59 cputime=141.299 memavail=7290340 print_time=3066.823 buffer_time=2.615 print_stall=0 extruder: target=240 temp=240.0 pwm=0.452
Stats 797841.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4190501 bytes_read=995688 bytes_retransmit=9 bytes_invalid=0 send_seq=81205 receive_seq=81205 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992881 heater_bed: target=80 temp=79.8 pwm=0.450 sd_pos=637156 sysload=0.59 cputime=141.351 memavail=7290116 print_time=3067.417 buffer_time=2.208 print_stall=0 extruder: target=240 temp=240.4 pwm=0.280
Stats 797842.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4193653 bytes_read=996271 bytes_retransmit=9 bytes_invalid=0 send_seq=81266 receive_seq=81266 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=80 temp=79.8 pwm=0.567 sd_pos=637613 sysload=0.59 cputime=141.417 memavail=7290116 print_time=3068.852 buffer_time=2.642 print_stall=0 extruder: target=240 temp=240.2 pwm=0.428
Stats 797843.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4195497 bytes_read=996759 bytes_retransmit=9 bytes_invalid=0 send_seq=81305 receive_seq=81305 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992869 heater_bed: target=80 temp=79.8 pwm=0.506 sd_pos=637919 sysload=0.59 cputime=141.480 memavail=7290116 print_time=3069.217 buffer_time=2.007 print_stall=0 extruder: target=240 temp=239.8 pwm=0.554
Stats 797844.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4200515 bytes_read=997506 bytes_retransmit=9 bytes_invalid=0 send_seq=81396 receive_seq=81396 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=397 freq=119992893 heater_bed: target=80 temp=79.8 pwm=0.506 sd_pos=638976 sysload=0.55 cputime=141.564 memavail=7290116 print_time=3070.337 buffer_time=2.127 print_stall=0 extruder: target=240 temp=239.7 pwm=0.618
Stats 797845.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4204968 bytes_read=998190 bytes_retransmit=9 bytes_invalid=0 send_seq=81474 receive_seq=81474 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=1013 freq=119992889 heater_bed: target=80 temp=79.8 pwm=0.448 sd_pos=639923 sysload=0.55 cputime=141.667 memavail=7290116 print_time=3071.436 buffer_time=2.224 print_stall=0 extruder: target=240 temp=239.7 pwm=0.594
Stats 797846.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4209913 bytes_read=998913 bytes_retransmit=9 bytes_invalid=0 send_seq=81560 receive_seq=81560 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=1342 freq=119992882 heater_bed: target=80 temp=79.8 pwm=0.540 sd_pos=640968 sysload=0.55 cputime=141.778 memavail=7289360 print_time=3072.556 buffer_time=2.344 print_stall=0 extruder: target=240 temp=240.0 pwm=0.457
Stats 797847.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4214263 bytes_read=999580 bytes_retransmit=9 bytes_invalid=0 send_seq=81635 receive_seq=81635 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992877 heater_bed: target=80 temp=79.8 pwm=0.455 sd_pos=641576 sysload=0.55 cputime=141.873 memavail=7289360 print_time=3073.409 buffer_time=2.197 print_stall=0 extruder: target=240 temp=239.8 pwm=0.590
Stats 797848.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4215534 bytes_read=1000003 bytes_retransmit=9 bytes_invalid=0 send_seq=81664 receive_seq=81664 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=79.9 pwm=0.455 sd_pos=641635 sysload=0.55 cputime=141.927 memavail=7289360 print_time=3074.224 buffer_time=2.011 print_stall=0 extruder: target=240 temp=240.1 pwm=0.459
Stats 797849.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4216783 bytes_read=1000441 bytes_retransmit=9 bytes_invalid=0 send_seq=81693 receive_seq=81693 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992916 heater_bed: target=80 temp=79.8 pwm=0.507 sd_pos=641777 sysload=0.50 cputime=141.991 memavail=7289368 print_time=3075.627 buffer_time=2.414 print_stall=0 extruder: target=240 temp=240.2 pwm=0.407
Stats 797850.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4217624 bytes_read=1000859 bytes_retransmit=9 bytes_invalid=0 send_seq=81715 receive_seq=81715 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992906 heater_bed: target=80 temp=79.9 pwm=0.434 sd_pos=641906 sysload=0.50 cputime=142.041 memavail=7289144 print_time=3076.251 buffer_time=2.036 print_stall=0 extruder: target=240 temp=240.0 pwm=0.494
Stats 797851.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4221623 bytes_read=1001507 bytes_retransmit=9 bytes_invalid=0 send_seq=81789 receive_seq=81789 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992896 heater_bed: target=80 temp=79.9 pwm=0.419 sd_pos=642536 sysload=0.50 cputime=142.112 memavail=7289204 print_time=3078.139 buffer_time=2.924 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 797852.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4224943 bytes_read=1002120 bytes_retransmit=9 bytes_invalid=0 send_seq=81853 receive_seq=81853 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992887 heater_bed: target=80 temp=79.9 pwm=0.461 sd_pos=643139 sysload=0.50 cputime=142.175 memavail=7291732 print_time=3078.782 buffer_time=2.566 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 797853.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4227766 bytes_read=1002692 bytes_retransmit=9 bytes_invalid=0 send_seq=81909 receive_seq=81909 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992916 heater_bed: target=80 temp=79.9 pwm=0.457 sd_pos=643711 sysload=0.50 cputime=142.239 memavail=7290356 print_time=3079.301 buffer_time=2.085 print_stall=0 extruder: target=240 temp=240.1 pwm=0.469
Stats 797854.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4231812 bytes_read=1003318 bytes_retransmit=9 bytes_invalid=0 send_seq=81980 receive_seq=81980 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992903 heater_bed: target=80 temp=79.9 pwm=0.457 sd_pos=644207 sysload=0.54 cputime=142.334 memavail=7289684 print_time=3080.169 buffer_time=1.951 print_stall=0 extruder: target=240 temp=240.1 pwm=0.463
Stats 797855.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4236837 bytes_read=1004054 bytes_retransmit=9 bytes_invalid=0 send_seq=82067 receive_seq=82067 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2642 freq=119992894 heater_bed: target=80 temp=79.8 pwm=0.603 sd_pos=645164 sysload=0.54 cputime=142.440 memavail=7293560 print_time=3081.732 buffer_time=2.513 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 797856.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4241564 bytes_read=1004749 bytes_retransmit=9 bytes_invalid=0 send_seq=82148 receive_seq=82148 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2390 freq=119992885 heater_bed: target=80 temp=79.9 pwm=0.498 sd_pos=645769 sysload=0.54 cputime=142.536 memavail=7291656 print_time=3082.478 buffer_time=2.259 print_stall=0 extruder: target=240 temp=239.8 pwm=0.560
Stats 797857.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4246435 bytes_read=1005447 bytes_retransmit=9 bytes_invalid=0 send_seq=82232 receive_seq=82232 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=520 freq=119992871 heater_bed: target=80 temp=79.9 pwm=0.498 sd_pos=646069 sysload=0.54 cputime=142.634 memavail=7291436 print_time=3083.328 buffer_time=2.108 print_stall=0 extruder: target=240 temp=240.0 pwm=0.479
Stats 797858.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4249132 bytes_read=1006000 bytes_retransmit=9 bytes_invalid=0 send_seq=82284 receive_seq=82284 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992862 heater_bed: target=80 temp=79.9 pwm=0.557 sd_pos=646324 sysload=0.54 cputime=142.696 memavail=7292400 print_time=3084.358 buffer_time=2.138 print_stall=0 extruder: target=240 temp=240.0 pwm=0.479
Stats 797859.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4252562 bytes_read=1006637 bytes_retransmit=9 bytes_invalid=0 send_seq=82353 receive_seq=82353 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992920 heater_bed: target=80 temp=79.9 pwm=0.511 sd_pos=646603 sysload=0.50 cputime=142.775 memavail=7293744 print_time=3085.375 buffer_time=2.154 print_stall=0 extruder: target=240 temp=240.0 pwm=0.460
Stats 797860.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4254685 bytes_read=1007125 bytes_retransmit=9 bytes_invalid=0 send_seq=82395 receive_seq=82395 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992917 heater_bed: target=80 temp=79.8 pwm=0.552 sd_pos=646860 sysload=0.50 cputime=142.854 memavail=7292124 print_time=3086.359 buffer_time=2.137 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 797861.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4257459 bytes_read=1007709 bytes_retransmit=9 bytes_invalid=0 send_seq=82450 receive_seq=82450 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119992902 heater_bed: target=80 temp=79.8 pwm=0.610 sd_pos=647105 sysload=0.50 cputime=142.913 memavail=7293024 print_time=3087.440 buffer_time=2.218 print_stall=0 extruder: target=240 temp=239.8 pwm=0.573
Stats 797862.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4259305 bytes_read=1008201 bytes_retransmit=9 bytes_invalid=0 send_seq=82490 receive_seq=82490 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992924 heater_bed: target=80 temp=79.8 pwm=0.556 sd_pos=647158 sysload=0.50 cputime=142.969 memavail=7291680 print_time=3088.645 buffer_time=2.421 print_stall=0 extruder: target=240 temp=239.9 pwm=0.515
Stats 797863.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4260037 bytes_read=1008584 bytes_retransmit=9 bytes_invalid=0 send_seq=82511 receive_seq=82511 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992911 heater_bed: target=80 temp=79.8 pwm=0.556 sd_pos=647296 sysload=0.50 cputime=143.031 memavail=7293068 print_time=3089.288 buffer_time=2.064 print_stall=0 extruder: target=240 temp=239.8 pwm=0.590
Stats 797864.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4261350 bytes_read=1009027 bytes_retransmit=9 bytes_invalid=0 send_seq=82541 receive_seq=82541 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119992904 heater_bed: target=80 temp=79.8 pwm=0.506 sd_pos=647409 sysload=0.46 cputime=143.093 memavail=7294096 print_time=3090.483 buffer_time=2.259 print_stall=0 extruder: target=240 temp=239.6 pwm=0.606
Stats 797865.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4262657 bytes_read=1009464 bytes_retransmit=9 bytes_invalid=0 send_seq=82570 receive_seq=82570 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992919 heater_bed: target=80 temp=79.8 pwm=0.520 sd_pos=647532 sysload=0.46 cputime=143.153 memavail=7292752 print_time=3091.660 buffer_time=2.435 print_stall=0 extruder: target=240 temp=239.6 pwm=0.607
Stats 797866.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4265848 bytes_read=1010072 bytes_retransmit=9 bytes_invalid=0 send_seq=82633 receive_seq=82633 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992908 heater_bed: target=80 temp=79.9 pwm=0.519 sd_pos=648020 sysload=0.46 cputime=143.219 memavail=7291056 print_time=3092.373 buffer_time=2.148 print_stall=0 extruder: target=240 temp=239.8 pwm=0.453
Stats 797867.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4271397 bytes_read=1010865 bytes_retransmit=9 bytes_invalid=0 send_seq=82733 receive_seq=82733 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=1484 freq=119992939 heater_bed: target=80 temp=79.8 pwm=0.566 sd_pos=649243 sysload=0.46 cputime=143.300 memavail=7290612 print_time=3093.715 buffer_time=2.487 print_stall=0 extruder: target=240 temp=240.1 pwm=0.368
Stats 797868.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4274609 bytes_read=1011457 bytes_retransmit=9 bytes_invalid=0 send_seq=82793 receive_seq=82793 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=1812 freq=119992925 heater_bed: target=80 temp=79.9 pwm=0.475 sd_pos=649855 sysload=0.46 cputime=143.388 memavail=7290612 print_time=3094.385 buffer_time=2.157 print_stall=0 extruder: target=240 temp=240.0 pwm=0.485
Stats 797869.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4279979 bytes_read=1012185 bytes_retransmit=9 bytes_invalid=0 send_seq=82883 receive_seq=82883 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=3331 freq=119992916 heater_bed: target=80 temp=79.9 pwm=0.475 sd_pos=651075 sysload=0.42 cputime=143.496 memavail=7290140 print_time=3095.726 buffer_time=2.496 print_stall=0 extruder: target=240 temp=240.1 pwm=0.445
Stats 797870.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4285294 bytes_read=1012928 bytes_retransmit=9 bytes_invalid=0 send_seq=82973 receive_seq=82973 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=489 freq=119992902 heater_bed: target=80 temp=79.9 pwm=0.484 sd_pos=651684 sysload=0.42 cputime=143.601 memavail=7292188 print_time=3096.278 buffer_time=2.046 print_stall=0 extruder: target=240 temp=239.7 pwm=0.654
Stats 797871.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4287750 bytes_read=1013476 bytes_retransmit=9 bytes_invalid=0 send_seq=83021 receive_seq=83021 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992899 heater_bed: target=80 temp=79.9 pwm=0.484 sd_pos=651743 sysload=0.42 cputime=143.670 memavail=7294580 print_time=3097.417 buffer_time=2.184 print_stall=0 extruder: target=240 temp=239.7 pwm=0.614
Stats 797872.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4288987 bytes_read=1013894 bytes_retransmit=9 bytes_invalid=0 send_seq=83049 receive_seq=83049 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992896 heater_bed: target=80 temp=79.9 pwm=0.484 sd_pos=651883 sysload=0.42 cputime=143.734 memavail=7293656 print_time=3098.839 buffer_time=2.605 print_stall=0 extruder: target=240 temp=240.0 pwm=0.452
Stats 797873.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4289781 bytes_read=1014297 bytes_retransmit=9 bytes_invalid=0 send_seq=83071 receive_seq=83071 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992887 heater_bed: target=80 temp=79.9 pwm=0.464 sd_pos=652000 sysload=0.42 cputime=143.781 memavail=7293656 print_time=3099.463 buffer_time=2.228 print_stall=0 extruder: target=240 temp=240.0 pwm=0.560
Stats 797874.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4290690 bytes_read=1014709 bytes_retransmit=9 bytes_invalid=0 send_seq=83095 receive_seq=83095 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992877 heater_bed: target=80 temp=79.9 pwm=0.455 sd_pos=652059 sysload=0.39 cputime=143.835 memavail=7293208 print_time=3100.346 buffer_time=2.109 print_stall=0 extruder: target=240 temp=240.4 pwm=0.372
Stats 797875.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4293569 bytes_read=1015272 bytes_retransmit=9 bytes_invalid=0 send_seq=83152 receive_seq=83152 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=79.9 pwm=0.455 sd_pos=652541 sysload=0.39 cputime=143.889 memavail=7294788 print_time=3101.242 buffer_time=2.006 print_stall=0 extruder: target=240 temp=240.1 pwm=0.551
Stats 797876.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4299651 bytes_read=1016120 bytes_retransmit=9 bytes_invalid=0 send_seq=83260 receive_seq=83260 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992878 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=653980 sysload=0.39 cputime=143.971 memavail=7292164 print_time=3102.431 buffer_time=2.194 print_stall=0 extruder: target=240 temp=240.1 pwm=0.478
Stats 797877.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4303214 bytes_read=1016742 bytes_retransmit=9 bytes_invalid=0 send_seq=83326 receive_seq=83326 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1460 freq=119992867 heater_bed: target=80 temp=79.9 pwm=0.586 sd_pos=654829 sysload=0.39 cputime=144.058 memavail=7293808 print_time=3103.500 buffer_time=2.263 print_stall=0 extruder: target=240 temp=240.1 pwm=0.501
Stats 797878.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4308274 bytes_read=1017460 bytes_retransmit=9 bytes_invalid=0 send_seq=83414 receive_seq=83414 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=1075 freq=119992859 heater_bed: target=80 temp=79.9 pwm=0.484 sd_pos=655214 sysload=0.39 cputime=144.154 memavail=7292688 print_time=3104.540 buffer_time=2.301 print_stall=0 extruder: target=240 temp=239.8 pwm=0.567
Stats 797879.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4313243 bytes_read=1018183 bytes_retransmit=9 bytes_invalid=0 send_seq=83500 receive_seq=83500 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1437 freq=119992847 heater_bed: target=80 temp=79.9 pwm=0.484 sd_pos=656296 sysload=0.52 cputime=144.252 memavail=7291792 print_time=3105.637 buffer_time=2.399 print_stall=0 extruder: target=240 temp=239.8 pwm=0.540
Stats 797880.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4317529 bytes_read=1018850 bytes_retransmit=9 bytes_invalid=0 send_seq=83575 receive_seq=83575 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=2392 freq=119992837 heater_bed: target=80 temp=80.0 pwm=0.481 sd_pos=657330 sysload=0.52 cputime=144.347 memavail=7291792 print_time=3106.591 buffer_time=2.352 print_stall=0 extruder: target=240 temp=240.2 pwm=0.422
Stats 797881.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4322238 bytes_read=1019559 bytes_retransmit=9 bytes_invalid=0 send_seq=83658 receive_seq=83658 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2674 freq=119992830 heater_bed: target=80 temp=79.9 pwm=0.481 sd_pos=658061 sysload=0.52 cputime=144.446 memavail=7293616 print_time=3107.579 buffer_time=2.339 print_stall=0 extruder: target=240 temp=240.1 pwm=0.542
Stats 797882.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4327578 bytes_read=1020312 bytes_retransmit=9 bytes_invalid=0 send_seq=83750 receive_seq=83750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2185 freq=119992821 heater_bed: target=80 temp=79.9 pwm=0.534 sd_pos=658437 sysload=0.52 cputime=144.544 memavail=7292256 print_time=3108.618 buffer_time=2.378 print_stall=0 extruder: target=240 temp=240.1 pwm=0.542
Stats 797883.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4332793 bytes_read=1021049 bytes_retransmit=9 bytes_invalid=0 send_seq=83839 receive_seq=83839 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992828 heater_bed: target=80 temp=79.9 pwm=0.463 sd_pos=658762 sysload=0.52 cputime=144.639 memavail=7294200 print_time=3109.534 buffer_time=2.293 print_stall=0 extruder: target=240 temp=240.1 pwm=0.490
Stats 797884.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4333980 bytes_read=1021472 bytes_retransmit=9 bytes_invalid=0 send_seq=83868 receive_seq=83868 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=79.9 pwm=0.463 sd_pos=658816 sysload=0.47 cputime=144.690 memavail=7294344 print_time=3110.459 buffer_time=2.217 print_stall=0 extruder: target=240 temp=239.8 pwm=0.612
Stats 797885.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4335192 bytes_read=1021910 bytes_retransmit=9 bytes_invalid=0 send_seq=83897 receive_seq=83897 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992892 heater_bed: target=80 temp=79.9 pwm=0.516 sd_pos=658955 sysload=0.47 cputime=144.756 memavail=7292536 print_time=3111.315 buffer_time=2.073 print_stall=0 extruder: target=240 temp=240.2 pwm=0.386
Stats 797886.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4336061 bytes_read=1022333 bytes_retransmit=9 bytes_invalid=0 send_seq=83920 receive_seq=83920 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992881 heater_bed: target=80 temp=79.9 pwm=0.451 sd_pos=659068 sysload=0.47 cputime=144.813 memavail=7293244 print_time=3112.312 buffer_time=2.069 print_stall=0 extruder: target=240 temp=240.1 pwm=0.522
Stats 797887.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4337345 bytes_read=1022771 bytes_retransmit=9 bytes_invalid=0 send_seq=83952 receive_seq=83952 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=79.9 pwm=0.583 sd_pos=659190 sysload=0.47 cputime=144.871 memavail=7291884 print_time=3113.489 buffer_time=2.245 print_stall=0 extruder: target=240 temp=240.1 pwm=0.474
Stats 797888.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4342202 bytes_read=1023525 bytes_retransmit=9 bytes_invalid=0 send_seq=84042 receive_seq=84042 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=79.9 pwm=0.479 sd_pos=660041 sysload=0.47 cputime=144.954 memavail=7293756 print_time=3114.519 buffer_time=2.275 print_stall=0 extruder: target=240 temp=240.1 pwm=0.474
Stats 797889.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4346389 bytes_read=1024200 bytes_retransmit=9 bytes_invalid=0 send_seq=84119 receive_seq=84119 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 upcoming_bytes=388 freq=119992836 heater_bed: target=80 temp=79.9 pwm=0.546 sd_pos=660905 sysload=0.52 cputime=145.030 memavail=7291464 print_time=3115.362 buffer_time=2.117 print_stall=0 extruder: target=240 temp=240.1 pwm=0.458
Stats 797890.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4350280 bytes_read=1024811 bytes_retransmit=9 bytes_invalid=0 send_seq=84187 receive_seq=84187 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=2641 freq=119992825 heater_bed: target=80 temp=79.9 pwm=0.443 sd_pos=662210 sysload=0.52 cputime=145.130 memavail=7294512 print_time=3116.555 buffer_time=2.309 print_stall=0 extruder: target=240 temp=240.0 pwm=0.571
Stats 797891.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4355692 bytes_read=1025567 bytes_retransmit=9 bytes_invalid=0 send_seq=84278 receive_seq=84278 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=1827 freq=119992820 heater_bed: target=80 temp=79.9 pwm=0.438 sd_pos=663071 sysload=0.52 cputime=145.242 memavail=7293364 print_time=3117.397 buffer_time=2.150 print_stall=0 extruder: target=240 temp=239.9 pwm=0.565
Stats 797892.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4361045 bytes_read=1026319 bytes_retransmit=9 bytes_invalid=0 send_seq=84370 receive_seq=84370 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=610 freq=119992813 heater_bed: target=80 temp=79.9 pwm=0.500 sd_pos=663984 sysload=0.52 cputime=145.357 memavail=7294960 print_time=3118.785 buffer_time=2.538 print_stall=0 extruder: target=240 temp=239.8 pwm=0.583
Stats 797893.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4362986 bytes_read=1026807 bytes_retransmit=9 bytes_invalid=0 send_seq=84412 receive_seq=84412 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992867 heater_bed: target=80 temp=80.0 pwm=0.449 sd_pos=664013 sysload=0.52 cputime=145.419 memavail=7293168 print_time=3119.267 buffer_time=2.019 print_stall=0 extruder: target=240 temp=239.9 pwm=0.557
Stats 797894.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4364269 bytes_read=1027245 bytes_retransmit=9 bytes_invalid=0 send_seq=84441 receive_seq=84441 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992860 heater_bed: target=80 temp=80.0 pwm=0.510 sd_pos=664153 sysload=0.56 cputime=145.476 memavail=7293716 print_time=3120.670 buffer_time=2.422 print_stall=0 extruder: target=240 temp=239.9 pwm=0.482
Stats 797895.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4365075 bytes_read=1027652 bytes_retransmit=9 bytes_invalid=0 send_seq=84464 receive_seq=84464 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992850 heater_bed: target=80 temp=79.9 pwm=0.510 sd_pos=664270 sysload=0.56 cputime=145.535 memavail=7291908 print_time=3121.294 buffer_time=2.045 print_stall=0 extruder: target=240 temp=240.1 pwm=0.451
Stats 797896.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4368664 bytes_read=1028281 bytes_retransmit=9 bytes_invalid=0 send_seq=84531 receive_seq=84531 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992842 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=664804 sysload=0.56 cputime=145.599 memavail=7292360 print_time=3123.090 buffer_time=2.841 print_stall=0 extruder: target=240 temp=240.3 pwm=0.362
Stats 797897.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4371013 bytes_read=1028824 bytes_retransmit=9 bytes_invalid=0 send_seq=84581 receive_seq=84581 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992862 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=665287 sysload=0.56 cputime=145.668 memavail=7291916 print_time=3123.514 buffer_time=2.264 print_stall=0 extruder: target=240 temp=239.9 pwm=0.567
Stats 797898.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4375317 bytes_read=1029516 bytes_retransmit=9 bytes_invalid=0 send_seq=84661 receive_seq=84661 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992859 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=666212 sysload=0.56 cputime=145.741 memavail=7293464 print_time=3124.329 buffer_time=2.078 print_stall=0 extruder: target=240 temp=240.0 pwm=0.478
Stats 797899.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4379302 bytes_read=1030144 bytes_retransmit=9 bytes_invalid=0 send_seq=84731 receive_seq=84731 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1825 freq=119992852 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=667619 sysload=0.51 cputime=145.837 memavail=7294368 print_time=3125.512 buffer_time=2.261 print_stall=0 extruder: target=240 temp=240.1 pwm=0.483
Stats 797900.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4384410 bytes_read=1030893 bytes_retransmit=9 bytes_invalid=0 send_seq=84819 receive_seq=84819 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=1075 freq=119992844 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=668202 sysload=0.51 cputime=145.937 memavail=7293472 print_time=3126.510 buffer_time=2.258 print_stall=0 extruder: target=240 temp=239.8 pwm=0.547
Stats 797901.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4389116 bytes_read=1031595 bytes_retransmit=9 bytes_invalid=0 send_seq=84901 receive_seq=84901 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=80.0 pwm=0.523 sd_pos=668612 sysload=0.51 cputime=146.029 memavail=7292576 print_time=3127.306 buffer_time=2.053 print_stall=0 extruder: target=240 temp=240.2 pwm=0.355
Stats 797902.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4393993 bytes_read=1032298 bytes_retransmit=9 bytes_invalid=0 send_seq=84986 receive_seq=84986 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=260 freq=119992825 heater_bed: target=80 temp=80.0 pwm=0.525 sd_pos=669620 sysload=0.51 cputime=146.123 memavail=7294160 print_time=3128.256 buffer_time=2.003 print_stall=0 extruder: target=240 temp=240.1 pwm=0.484
Stats 797903.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4398181 bytes_read=1032951 bytes_retransmit=9 bytes_invalid=0 send_seq=85058 receive_seq=85058 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=3974 freq=119992822 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=671017 sysload=0.51 cputime=146.236 memavail=7293264 print_time=3129.743 buffer_time=2.488 print_stall=0 extruder: target=240 temp=239.8 pwm=0.569
Stats 797904.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4403660 bytes_read=1033713 bytes_retransmit=9 bytes_invalid=0 send_seq=85152 receive_seq=85152 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=2921 freq=119992817 heater_bed: target=80 temp=79.9 pwm=0.519 sd_pos=671785 sysload=0.71 cputime=146.341 memavail=7292564 print_time=3130.629 buffer_time=2.373 print_stall=0 extruder: target=240 temp=240.0 pwm=0.515
Stats 797905.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4409524 bytes_read=1034501 bytes_retransmit=9 bytes_invalid=0 send_seq=85254 receive_seq=85254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2110 freq=119992808 heater_bed: target=80 temp=79.9 pwm=0.519 sd_pos=672352 sysload=0.71 cputime=146.440 memavail=7292340 print_time=3131.813 buffer_time=2.557 print_stall=0 extruder: target=240 temp=239.8 pwm=0.560
Stats 797906.7: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4412738 bytes_read=1035114 bytes_retransmit=9 bytes_invalid=0 send_seq=85312 receive_seq=85312 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992858 heater_bed: target=80 temp=79.9 pwm=0.519 sd_pos=672406 sysload=0.71 cputime=146.523 memavail=7291360 print_time=3132.571 buffer_time=2.313 print_stall=0 extruder: target=240 temp=240.3 pwm=0.387
Stats 797907.7: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4414432 bytes_read=1035582 bytes_retransmit=9 bytes_invalid=0 send_seq=85350 receive_seq=85350 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=79.9 pwm=0.454 sd_pos=672545 sysload=0.71 cputime=146.589 memavail=7290692 print_time=3133.661 buffer_time=2.402 print_stall=0 extruder: target=240 temp=240.1 pwm=0.487
Stats 797908.7: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4415296 bytes_read=1035975 bytes_retransmit=9 bytes_invalid=0 send_seq=85373 receive_seq=85373 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992846 heater_bed: target=80 temp=79.9 pwm=0.589 sd_pos=672602 sysload=0.71 cputime=146.642 memavail=7293240 print_time=3134.589 buffer_time=2.329 print_stall=0 extruder: target=240 temp=239.8 pwm=0.615
Stats 797909.7: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4417047 bytes_read=1036477 bytes_retransmit=9 bytes_invalid=0 send_seq=85412 receive_seq=85412 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=79.9 pwm=0.521 sd_pos=672792 sysload=0.65 cputime=146.710 memavail=7292792 print_time=3136.033 buffer_time=2.773 print_stall=0 extruder: target=240 temp=239.6 pwm=0.645
Stats 797910.7: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4419690 bytes_read=1037015 bytes_retransmit=9 bytes_invalid=0 send_seq=85464 receive_seq=85464 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=79.9 pwm=0.521 sd_pos=673190 sysload=0.65 cputime=146.765 memavail=7292792 print_time=3136.654 buffer_time=2.393 print_stall=0 extruder: target=240 temp=240.1 pwm=0.444
Stats 797911.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4424207 bytes_read=1037728 bytes_retransmit=9 bytes_invalid=0 send_seq=85548 receive_seq=85548 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119992866 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=674056 sysload=0.65 cputime=146.839 memavail=7293292 print_time=3137.458 buffer_time=2.197 print_stall=0 extruder: target=240 temp=240.1 pwm=0.518
Stats 797912.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4427475 bytes_read=1038335 bytes_retransmit=9 bytes_invalid=0 send_seq=85608 receive_seq=85608 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1576 freq=119992857 heater_bed: target=80 temp=79.9 pwm=0.512 sd_pos=674937 sysload=0.65 cputime=146.937 memavail=7292144 print_time=3138.365 buffer_time=2.103 print_stall=0 extruder: target=240 temp=239.7 pwm=0.644
Stats 797913.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4432690 bytes_read=1039058 bytes_retransmit=9 bytes_invalid=0 send_seq=85697 receive_seq=85697 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=2615 freq=119992848 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=676204 sysload=0.65 cputime=147.049 memavail=7293952 print_time=3139.545 buffer_time=2.282 print_stall=0 extruder: target=240 temp=240.1 pwm=0.474
Stats 797914.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4438019 bytes_read=1039786 bytes_retransmit=9 bytes_invalid=0 send_seq=85787 receive_seq=85787 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=1999 freq=119992837 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=677431 sysload=0.60 cputime=147.172 memavail=7291384 print_time=3140.445 buffer_time=2.182 print_stall=0 extruder: target=240 temp=239.8 pwm=0.527
Stats 797915.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4442229 bytes_read=1040458 bytes_retransmit=9 bytes_invalid=0 send_seq=85860 receive_seq=85860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.530 sd_pos=677569 sysload=0.60 cputime=147.255 memavail=7292600 print_time=3141.425 buffer_time=2.161 print_stall=0 extruder: target=240 temp=240.0 pwm=0.465
Stats 797916.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4444063 bytes_read=1040947 bytes_retransmit=9 bytes_invalid=0 send_seq=85899 receive_seq=85899 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992861 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=677738 sysload=0.60 cputime=147.321 memavail=7294192 print_time=3142.683 buffer_time=2.419 print_stall=0 extruder: target=240 temp=239.7 pwm=0.592
Stats 797917.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4444771 bytes_read=1041325 bytes_retransmit=9 bytes_invalid=0 send_seq=85919 receive_seq=85919 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992846 heater_bed: target=80 temp=80.0 pwm=0.500 sd_pos=677738 sysload=0.60 cputime=147.377 memavail=7291572 print_time=3143.310 buffer_time=2.046 print_stall=0 extruder: target=240 temp=239.7 pwm=0.542
Stats 797918.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4446277 bytes_read=1041807 bytes_retransmit=9 bytes_invalid=0 send_seq=85954 receive_seq=85954 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=677914 sysload=0.60 cputime=147.467 memavail=7292320 print_time=3144.817 buffer_time=2.552 print_stall=0 extruder: target=240 temp=240.1 pwm=0.410
Stats 797919.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4449548 bytes_read=1042400 bytes_retransmit=9 bytes_invalid=0 send_seq=86017 receive_seq=86017 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=678485 sysload=0.55 cputime=147.537 memavail=7293344 print_time=3145.817 buffer_time=2.551 print_stall=0 extruder: target=240 temp=240.2 pwm=0.419
Stats 797920.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4454481 bytes_read=1043133 bytes_retransmit=9 bytes_invalid=0 send_seq=86108 receive_seq=86108 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992808 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=679763 sysload=0.55 cputime=147.617 memavail=7292100 print_time=3146.746 buffer_time=2.479 print_stall=0 extruder: target=240 temp=240.3 pwm=0.390
Stats 797921.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4456977 bytes_read=1043706 bytes_retransmit=9 bytes_invalid=0 send_seq=86159 receive_seq=86158 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=2933 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=681092 sysload=0.55 cputime=147.715 memavail=7291652 print_time=3147.780 buffer_time=2.513 print_stall=0 extruder: target=240 temp=239.9 pwm=0.544
Stats 797922.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4461580 bytes_read=1044384 bytes_retransmit=9 bytes_invalid=0 send_seq=86238 receive_seq=86238 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=3115 freq=119992797 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=681439 sysload=0.55 cputime=147.809 memavail=7293440 print_time=3148.837 buffer_time=2.567 print_stall=0 extruder: target=240 temp=239.7 pwm=0.642
Stats 797923.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4466900 bytes_read=1045107 bytes_retransmit=9 bytes_invalid=0 send_seq=86328 receive_seq=86327 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1726 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.503 sd_pos=681733 sysload=0.55 cputime=147.914 memavail=7292096 print_time=3149.628 buffer_time=2.357 print_stall=0 extruder: target=240 temp=240.1 pwm=0.418
Stats 797924.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4471879 bytes_read=1045844 bytes_retransmit=9 bytes_invalid=0 send_seq=86413 receive_seq=86413 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1793 freq=119992792 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=682078 sysload=0.75 cputime=148.023 memavail=7290948 print_time=3150.685 buffer_time=2.413 print_stall=0 extruder: target=240 temp=239.9 pwm=0.502
Stats 797925.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4476659 bytes_read=1046534 bytes_retransmit=9 bytes_invalid=0 send_seq=86496 receive_seq=86496 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=828 freq=119992785 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=682521 sysload=0.75 cputime=148.126 memavail=7293244 print_time=3151.516 buffer_time=2.243 print_stall=0 extruder: target=240 temp=240.1 pwm=0.403
Stats 797926.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4481282 bytes_read=1047220 bytes_retransmit=9 bytes_invalid=0 send_seq=86576 receive_seq=86576 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2674 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=683816 sysload=0.75 cputime=148.236 memavail=7294392 print_time=3152.764 buffer_time=2.491 print_stall=0 extruder: target=240 temp=240.1 pwm=0.523
Stats 797927.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4486045 bytes_read=1047935 bytes_retransmit=9 bytes_invalid=0 send_seq=86659 receive_seq=86659 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=1601 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=684285 sysload=0.75 cputime=148.340 memavail=7292800 print_time=3153.491 buffer_time=2.216 print_stall=0 extruder: target=240 temp=240.2 pwm=0.374
Stats 797928.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4491341 bytes_read=1048668 bytes_retransmit=9 bytes_invalid=0 send_seq=86750 receive_seq=86750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=2022 freq=119992771 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=685292 sysload=0.75 cputime=148.467 memavail=7291816 print_time=3154.698 buffer_time=2.422 print_stall=0 extruder: target=240 temp=240.1 pwm=0.421
Stats 797929.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4496277 bytes_read=1049366 bytes_retransmit=9 bytes_invalid=0 send_seq=86834 receive_seq=86834 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1562 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.396 sd_pos=685963 sysload=0.77 cputime=148.570 memavail=7293524 print_time=3155.727 buffer_time=2.450 print_stall=0 extruder: target=240 temp=239.8 pwm=0.585
Stats 797930.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4500195 bytes_read=1050018 bytes_retransmit=9 bytes_invalid=0 send_seq=86903 receive_seq=86903 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=79.9 pwm=0.613 sd_pos=686071 sysload=0.77 cputime=148.647 memavail=7291020 print_time=3156.473 buffer_time=2.194 print_stall=0 extruder: target=240 temp=240.1 pwm=0.423
Stats 797931.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4501387 bytes_read=1050452 bytes_retransmit=9 bytes_invalid=0 send_seq=86931 receive_seq=86931 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=80.0 pwm=0.512 sd_pos=686125 sysload=0.77 cputime=148.699 memavail=7293284 print_time=3157.377 buffer_time=2.098 print_stall=0 extruder: target=240 temp=240.3 pwm=0.346
Stats 797932.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4502750 bytes_read=1050900 bytes_retransmit=9 bytes_invalid=0 send_seq=86962 receive_seq=86962 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=79.9 pwm=0.589 sd_pos=686321 sysload=0.77 cputime=148.736 memavail=7293456 print_time=3158.948 buffer_time=2.668 print_stall=0 extruder: target=240 temp=240.1 pwm=0.495
Stats 797933.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4503858 bytes_read=1051327 bytes_retransmit=9 bytes_invalid=0 send_seq=86989 receive_seq=86989 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=79.9 pwm=0.521 sd_pos=686377 sysload=0.77 cputime=148.768 memavail=7291888 print_time=3159.538 buffer_time=2.257 print_stall=0 extruder: target=240 temp=240.1 pwm=0.432
Stats 797934.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4504720 bytes_read=1051725 bytes_retransmit=9 bytes_invalid=0 send_seq=87013 receive_seq=87013 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=80 temp=79.9 pwm=0.536 sd_pos=686499 sysload=0.71 cputime=148.806 memavail=7290740 print_time=3160.392 buffer_time=2.112 print_stall=0 extruder: target=240 temp=240.2 pwm=0.418
Stats 797935.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4510131 bytes_read=1052503 bytes_retransmit=9 bytes_invalid=0 send_seq=87110 receive_seq=87110 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992837 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=687630 sysload=0.71 cputime=148.863 memavail=7292332 print_time=3161.495 buffer_time=2.214 print_stall=0 extruder: target=240 temp=240.0 pwm=0.488
Stats 797936.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4513875 bytes_read=1053165 bytes_retransmit=9 bytes_invalid=0 send_seq=87181 receive_seq=87181 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=1804 freq=119992829 heater_bed: target=80 temp=80.0 pwm=0.483 sd_pos=688903 sysload=0.71 cputime=148.934 memavail=7290208 print_time=3162.490 buffer_time=2.209 print_stall=0 extruder: target=240 temp=240.0 pwm=0.488
Stats 797937.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4518403 bytes_read=1053838 bytes_retransmit=9 bytes_invalid=0 send_seq=87260 receive_seq=87260 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=2727 freq=119992823 heater_bed: target=80 temp=80.0 pwm=0.344 sd_pos=690210 sysload=0.71 cputime=149.040 memavail=7289568 print_time=3163.480 buffer_time=2.198 print_stall=0 extruder: target=240 temp=240.1 pwm=0.440
Stats 797938.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4524176 bytes_read=1054626 bytes_retransmit=9 bytes_invalid=0 send_seq=87359 receive_seq=87359 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=46 upcoming_bytes=2226 freq=119992838 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=691513 sysload=0.71 cputime=149.158 memavail=7291580 print_time=3164.423 buffer_time=2.140 print_stall=0 extruder: target=240 temp=239.8 pwm=0.560
Stats 797939.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4529829 bytes_read=1055403 bytes_retransmit=9 bytes_invalid=0 send_seq=87456 receive_seq=87456 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1201 freq=119992832 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=692660 sysload=0.73 cputime=149.264 memavail=7290668 print_time=3165.397 buffer_time=2.114 print_stall=0 extruder: target=240 temp=239.7 pwm=0.583
Stats 797940.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4532861 bytes_read=1055966 bytes_retransmit=9 bytes_invalid=0 send_seq=87513 receive_seq=87513 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=80.1 pwm=0.415 sd_pos=692719 sysload=0.73 cputime=149.330 memavail=7289324 print_time=3166.462 buffer_time=2.178 print_stall=0 extruder: target=240 temp=240.0 pwm=0.452
Stats 797941.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4534133 bytes_read=1056425 bytes_retransmit=9 bytes_invalid=0 send_seq=87543 receive_seq=87543 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=80.1 pwm=0.433 sd_pos=692859 sysload=0.73 cputime=149.393 memavail=7288812 print_time=3167.866 buffer_time=2.582 print_stall=0 extruder: target=240 temp=239.9 pwm=0.518
Stats 797942.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4535025 bytes_read=1056847 bytes_retransmit=9 bytes_invalid=0 send_seq=87569 receive_seq=87569 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=692988 sysload=0.73 cputime=149.446 memavail=7288940 print_time=3168.489 buffer_time=2.205 print_stall=0 extruder: target=240 temp=240.1 pwm=0.481
Stats 797943.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4535868 bytes_read=1057235 bytes_retransmit=9 bytes_invalid=0 send_seq=87591 receive_seq=87591 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=693047 sysload=0.73 cputime=149.498 memavail=7291636 print_time=3169.372 buffer_time=2.086 print_stall=0 extruder: target=240 temp=240.4 pwm=0.344
Stats 797944.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4539836 bytes_read=1057903 bytes_retransmit=9 bytes_invalid=0 send_seq=87666 receive_seq=87666 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.1 pwm=0.440 sd_pos=693644 sysload=0.67 cputime=149.561 memavail=7291232 print_time=3170.477 buffer_time=2.190 print_stall=0 extruder: target=240 temp=240.2 pwm=0.403
Stats 797945.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4545088 bytes_read=1058670 bytes_retransmit=9 bytes_invalid=0 send_seq=87761 receive_seq=87761 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=115 freq=119992859 heater_bed: target=80 temp=80.1 pwm=0.440 sd_pos=694605 sysload=0.67 cputime=149.636 memavail=7291884 print_time=3171.536 buffer_time=2.249 print_stall=0 extruder: target=240 temp=239.9 pwm=0.544
Stats 797946.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4548338 bytes_read=1059259 bytes_retransmit=9 bytes_invalid=0 send_seq=87820 receive_seq=87820 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=383 freq=119992847 heater_bed: target=80 temp=80.0 pwm=0.548 sd_pos=695098 sysload=0.67 cputime=149.726 memavail=7290276 print_time=3172.344 buffer_time=2.056 print_stall=0 extruder: target=240 temp=239.9 pwm=0.511
Stats 797947.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4553343 bytes_read=1059977 bytes_retransmit=9 bytes_invalid=0 send_seq=87905 receive_seq=87905 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=3403 freq=119992840 heater_bed: target=80 temp=80.1 pwm=0.508 sd_pos=696780 sysload=0.67 cputime=149.844 memavail=7291832 print_time=3173.771 buffer_time=2.483 print_stall=0 extruder: target=240 temp=239.7 pwm=0.586
Stats 797948.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4557868 bytes_read=1060654 bytes_retransmit=9 bytes_invalid=0 send_seq=87982 receive_seq=87982 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=2624 freq=119992834 heater_bed: target=80 temp=80.0 pwm=0.536 sd_pos=697205 sysload=0.67 cputime=149.934 memavail=7290712 print_time=3174.495 buffer_time=2.206 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 797949.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4563467 bytes_read=1061407 bytes_retransmit=9 bytes_invalid=0 send_seq=88077 receive_seq=88077 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.1 pwm=0.482 sd_pos=697461 sysload=0.62 cputime=150.027 memavail=7290488 print_time=3175.475 buffer_time=2.185 print_stall=0 extruder: target=240 temp=240.1 pwm=0.476
Stats 797950.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4565916 bytes_read=1061956 bytes_retransmit=9 bytes_invalid=0 send_seq=88126 receive_seq=88126 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992824 heater_bed: target=80 temp=80.0 pwm=0.491 sd_pos=697719 sysload=0.62 cputime=150.088 memavail=7292024 print_time=3176.706 buffer_time=2.417 print_stall=0 extruder: target=240 temp=240.1 pwm=0.507
Stats 797951.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4569588 bytes_read=1062614 bytes_retransmit=9 bytes_invalid=0 send_seq=88196 receive_seq=88196 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992816 heater_bed: target=80 temp=80.0 pwm=0.491 sd_pos=698219 sysload=0.62 cputime=150.150 memavail=7291352 print_time=3177.691 buffer_time=2.400 print_stall=0 extruder: target=240 temp=240.1 pwm=0.455
Stats 797952.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4574496 bytes_read=1063347 bytes_retransmit=9 bytes_invalid=0 send_seq=88287 receive_seq=88287 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=1616 freq=119992873 heater_bed: target=80 temp=80.0 pwm=0.491 sd_pos=698920 sysload=0.62 cputime=150.223 memavail=7292992 print_time=3179.045 buffer_time=2.754 print_stall=0 extruder: target=240 temp=239.7 pwm=0.639
Stats 797953.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4576886 bytes_read=1063870 bytes_retransmit=9 bytes_invalid=0 send_seq=88333 receive_seq=88333 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=3558 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.494 sd_pos=699660 sysload=0.62 cputime=150.302 memavail=7293396 print_time=3179.967 buffer_time=2.676 print_stall=0 extruder: target=240 temp=239.8 pwm=0.563
Stats 797954.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4582263 bytes_read=1064622 bytes_retransmit=9 bytes_invalid=0 send_seq=88425 receive_seq=88425 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=1986 freq=119992855 heater_bed: target=80 temp=80.0 pwm=0.562 sd_pos=700134 sysload=0.57 cputime=150.399 memavail=7291908 print_time=3180.707 buffer_time=2.415 print_stall=0 extruder: target=240 temp=239.9 pwm=0.483
Stats 797955.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4587148 bytes_read=1065336 bytes_retransmit=9 bytes_invalid=0 send_seq=88509 receive_seq=88509 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=3886 freq=119992849 heater_bed: target=80 temp=80.0 pwm=0.565 sd_pos=700836 sysload=0.57 cputime=150.510 memavail=7291012 print_time=3182.062 buffer_time=2.769 print_stall=0 extruder: target=240 temp=239.8 pwm=0.548
Stats 797956.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4591570 bytes_read=1066009 bytes_retransmit=9 bytes_invalid=0 send_seq=88585 receive_seq=88585 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=3307 freq=119992843 heater_bed: target=80 temp=80.0 pwm=0.513 sd_pos=701233 sysload=0.57 cputime=150.610 memavail=7290260 print_time=3182.954 buffer_time=2.660 print_stall=0 extruder: target=240 temp=239.9 pwm=0.507
Stats 797957.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4596182 bytes_read=1066701 bytes_retransmit=9 bytes_invalid=0 send_seq=88665 receive_seq=88665 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.0 pwm=0.513 sd_pos=701312 sysload=0.57 cputime=150.697 memavail=7290260 print_time=3183.530 buffer_time=2.237 print_stall=0 extruder: target=240 temp=240.1 pwm=0.397
Stats 797958.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4597363 bytes_read=1067119 bytes_retransmit=9 bytes_invalid=0 send_seq=88693 receive_seq=88693 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=80.0 pwm=0.566 sd_pos=701367 sysload=0.57 cputime=150.755 memavail=7290260 print_time=3184.434 buffer_time=2.140 print_stall=0 extruder: target=240 temp=240.0 pwm=0.483
Stats 797959.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4598746 bytes_read=1067572 bytes_retransmit=9 bytes_invalid=0 send_seq=88725 receive_seq=88725 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=701534 sysload=0.52 cputime=150.814 memavail=7290260 print_time=3185.783 buffer_time=2.489 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 797960.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4599880 bytes_read=1068004 bytes_retransmit=9 bytes_invalid=0 send_seq=88753 receive_seq=88753 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992858 heater_bed: target=80 temp=79.9 pwm=0.554 sd_pos=701590 sysload=0.52 cputime=150.878 memavail=7290260 print_time=3186.373 buffer_time=2.078 print_stall=0 extruder: target=240 temp=240.2 pwm=0.434
Stats 797961.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4604060 bytes_read=1068683 bytes_retransmit=9 bytes_invalid=0 send_seq=88831 receive_seq=88831 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992855 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=702225 sysload=0.52 cputime=150.954 memavail=7290260 print_time=3188.026 buffer_time=2.730 print_stall=0 extruder: target=240 temp=240.0 pwm=0.535
Stats 797962.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4607652 bytes_read=1069308 bytes_retransmit=9 bytes_invalid=0 send_seq=88899 receive_seq=88899 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=79.9 pwm=0.560 sd_pos=702808 sysload=0.52 cputime=151.020 memavail=7290264 print_time=3188.649 buffer_time=2.353 print_stall=0 extruder: target=240 temp=240.1 pwm=0.476
Stats 797963.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4610194 bytes_read=1069841 bytes_retransmit=9 bytes_invalid=0 send_seq=88948 receive_seq=88948 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=961 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=703502 sysload=0.52 cputime=151.096 memavail=7290264 print_time=3189.306 buffer_time=2.010 print_stall=0 extruder: target=240 temp=240.1 pwm=0.426
Stats 797964.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4615172 bytes_read=1070544 bytes_retransmit=9 bytes_invalid=0 send_seq=89033 receive_seq=89033 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2838 freq=119992827 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=704915 sysload=0.48 cputime=151.205 memavail=7290264 print_time=3190.535 buffer_time=2.238 print_stall=0 extruder: target=240 temp=240.0 pwm=0.473
Stats 797965.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4620638 bytes_read=1071307 bytes_retransmit=9 bytes_invalid=0 send_seq=89127 receive_seq=89127 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=3781 freq=119992818 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=706364 sysload=0.48 cputime=151.322 memavail=7290264 print_time=3191.717 buffer_time=2.420 print_stall=0 extruder: target=240 temp=239.9 pwm=0.554
Stats 797966.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4626440 bytes_read=1072110 bytes_retransmit=9 bytes_invalid=0 send_seq=89226 receive_seq=89226 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=237 freq=119992814 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=706502 sysload=0.48 cputime=151.427 memavail=7289760 print_time=3192.696 buffer_time=2.399 print_stall=0 extruder: target=240 temp=240.1 pwm=0.512
Stats 797967.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4628012 bytes_read=1072563 bytes_retransmit=9 bytes_invalid=0 send_seq=89261 receive_seq=89261 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992806 heater_bed: target=80 temp=80.1 pwm=0.352 sd_pos=706561 sysload=0.48 cputime=151.484 memavail=7289760 print_time=3193.511 buffer_time=2.213 print_stall=0 extruder: target=240 temp=240.3 pwm=0.416
Stats 797968.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4629256 bytes_read=1073001 bytes_retransmit=9 bytes_invalid=0 send_seq=89290 receive_seq=89290 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=706671 sysload=0.48 cputime=151.543 memavail=7289760 print_time=3194.581 buffer_time=2.282 print_stall=0 extruder: target=240 temp=240.2 pwm=0.466
Stats 797969.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4630529 bytes_read=1073438 bytes_retransmit=9 bytes_invalid=0 send_seq=89319 receive_seq=89319 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.1 pwm=0.474 sd_pos=706788 sysload=0.44 cputime=151.604 memavail=7289760 print_time=3195.501 buffer_time=2.201 print_stall=0 extruder: target=240 temp=239.9 pwm=0.519
Stats 797970.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4634048 bytes_read=1074062 bytes_retransmit=9 bytes_invalid=0 send_seq=89385 receive_seq=89385 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.1 pwm=0.479 sd_pos=707457 sysload=0.44 cputime=151.672 memavail=7289760 print_time=3197.040 buffer_time=2.739 print_stall=0 extruder: target=240 temp=239.8 pwm=0.606
Stats 797971.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4637005 bytes_read=1074640 bytes_retransmit=9 bytes_invalid=0 send_seq=89442 receive_seq=89442 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992825 heater_bed: target=80 temp=80.1 pwm=0.479 sd_pos=708144 sysload=0.44 cputime=151.735 memavail=7289760 print_time=3197.537 buffer_time=2.236 print_stall=0 extruder: target=240 temp=240.4 pwm=0.265
Stats 797972.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4640535 bytes_read=1075272 bytes_retransmit=9 bytes_invalid=0 send_seq=89510 receive_seq=89510 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=1923 freq=119992813 heater_bed: target=80 temp=80.1 pwm=0.444 sd_pos=709427 sysload=0.44 cputime=151.823 memavail=7289760 print_time=3198.473 buffer_time=2.171 print_stall=0 extruder: target=240 temp=239.9 pwm=0.549
Stats 797973.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4645080 bytes_read=1075940 bytes_retransmit=9 bytes_invalid=0 send_seq=89588 receive_seq=89588 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2464 freq=119992813 heater_bed: target=80 temp=80.1 pwm=0.463 sd_pos=709843 sysload=0.44 cputime=151.926 memavail=7289760 print_time=3199.590 buffer_time=2.287 print_stall=0 extruder: target=240 temp=239.9 pwm=0.555
Stats 797974.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4651041 bytes_read=1076738 bytes_retransmit=9 bytes_invalid=0 send_seq=89689 receive_seq=89689 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=1178 freq=119992810 heater_bed: target=80 temp=80.0 pwm=0.549 sd_pos=710309 sysload=0.41 cputime=152.037 memavail=7289908 print_time=3200.572 buffer_time=2.269 print_stall=0 extruder: target=240 temp=239.8 pwm=0.555
Stats 797975.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4655763 bytes_read=1077456 bytes_retransmit=9 bytes_invalid=0 send_seq=89771 receive_seq=89771 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.545 sd_pos=710916 sysload=0.41 cputime=152.140 memavail=7289980 print_time=3201.319 buffer_time=2.015 print_stall=0 extruder: target=240 temp=239.8 pwm=0.540
Stats 797976.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4660468 bytes_read=1078139 bytes_retransmit=9 bytes_invalid=0 send_seq=89852 receive_seq=89852 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=125 freq=119992797 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=711341 sysload=0.41 cputime=152.239 memavail=7289920 print_time=3202.403 buffer_time=2.098 print_stall=0 extruder: target=240 temp=240.1 pwm=0.447
Stats 797977.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4665160 bytes_read=1078852 bytes_retransmit=9 bytes_invalid=0 send_seq=89936 receive_seq=89936 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=277 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=711837 sysload=0.41 cputime=152.327 memavail=7289980 print_time=3203.461 buffer_time=2.154 print_stall=0 extruder: target=240 temp=240.0 pwm=0.499
Stats 797978.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4669537 bytes_read=1079524 bytes_retransmit=9 bytes_invalid=0 send_seq=90012 receive_seq=90012 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=1881 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=712873 sysload=0.41 cputime=152.433 memavail=7289980 print_time=3204.873 buffer_time=2.566 print_stall=0 extruder: target=240 temp=240.2 pwm=0.414
Stats 797979.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4674102 bytes_read=1080197 bytes_retransmit=9 bytes_invalid=0 send_seq=90091 receive_seq=90091 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=713044 sysload=0.45 cputime=152.524 memavail=7289980 print_time=3205.369 buffer_time=2.061 print_stall=0 extruder: target=240 temp=240.0 pwm=0.517
Stats 797980.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4678726 bytes_read=1080911 bytes_retransmit=9 bytes_invalid=0 send_seq=90172 receive_seq=90172 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=1767 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=713954 sysload=0.45 cputime=152.623 memavail=7289980 print_time=3206.824 buffer_time=2.516 print_stall=0 extruder: target=240 temp=239.8 pwm=0.602
Stats 797981.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4683282 bytes_read=1081608 bytes_retransmit=9 bytes_invalid=0 send_seq=90253 receive_seq=90253 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1074 freq=119992775 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=714518 sysload=0.45 cputime=152.723 memavail=7289980 print_time=3207.716 buffer_time=2.408 print_stall=0 extruder: target=240 temp=239.9 pwm=0.543
Stats 797982.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4685394 bytes_read=1082106 bytes_retransmit=9 bytes_invalid=0 send_seq=90297 receive_seq=90297 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=714572 sysload=0.45 cputime=152.790 memavail=7289980 print_time=3208.473 buffer_time=2.165 print_stall=0 extruder: target=240 temp=240.0 pwm=0.465
Stats 797983.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4687072 bytes_read=1082584 bytes_retransmit=9 bytes_invalid=0 send_seq=90334 receive_seq=90334 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=714711 sysload=0.45 cputime=152.852 memavail=7289980 print_time=3209.563 buffer_time=2.254 print_stall=0 extruder: target=240 temp=239.9 pwm=0.554
Stats 797984.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4687910 bytes_read=1082986 bytes_retransmit=9 bytes_invalid=0 send_seq=90356 receive_seq=90356 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=714768 sysload=0.50 cputime=152.906 memavail=7289980 print_time=3210.492 buffer_time=2.182 print_stall=0 extruder: target=240 temp=240.4 pwm=0.347
Stats 797985.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4689673 bytes_read=1083475 bytes_retransmit=9 bytes_invalid=0 send_seq=90395 receive_seq=90395 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=714946 sysload=0.50 cputime=152.966 memavail=7289980 print_time=3211.936 buffer_time=2.626 print_stall=0 extruder: target=240 temp=240.1 pwm=0.530
Stats 797986.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4692342 bytes_read=1084028 bytes_retransmit=9 bytes_invalid=0 send_seq=90447 receive_seq=90447 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.0 pwm=0.576 sd_pos=715319 sysload=0.50 cputime=153.022 memavail=7289980 print_time=3212.565 buffer_time=2.255 print_stall=0 extruder: target=240 temp=240.1 pwm=0.462
Stats 797987.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4697843 bytes_read=1084830 bytes_retransmit=9 bytes_invalid=0 send_seq=90549 receive_seq=90549 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=80.0 pwm=0.567 sd_pos=716230 sysload=0.50 cputime=153.106 memavail=7289980 print_time=3213.595 buffer_time=2.284 print_stall=0 extruder: target=240 temp=240.1 pwm=0.435
Stats 797988.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4700520 bytes_read=1085363 bytes_retransmit=9 bytes_invalid=0 send_seq=90600 receive_seq=90600 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=2194 freq=119992820 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=717390 sysload=0.50 cputime=153.189 memavail=7289980 print_time=3214.523 buffer_time=2.211 print_stall=0 extruder: target=240 temp=239.8 pwm=0.514
Stats 797989.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4705885 bytes_read=1086126 bytes_retransmit=9 bytes_invalid=0 send_seq=90694 receive_seq=90694 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=2013 freq=119992810 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=718437 sysload=0.46 cputime=153.300 memavail=7290140 print_time=3215.460 buffer_time=2.147 print_stall=0 extruder: target=240 temp=239.8 pwm=0.477
Stats 797990.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4711352 bytes_read=1086899 bytes_retransmit=9 bytes_invalid=0 send_seq=90787 receive_seq=90787 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=1622 freq=119992805 heater_bed: target=80 temp=80.0 pwm=0.449 sd_pos=719682 sysload=0.46 cputime=153.415 memavail=7290236 print_time=3216.525 buffer_time=2.211 print_stall=0 extruder: target=240 temp=240.2 pwm=0.403
Stats 797991.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4715041 bytes_read=1087512 bytes_retransmit=9 bytes_invalid=0 send_seq=90854 receive_seq=90854 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.0 pwm=0.528 sd_pos=719741 sysload=0.46 cputime=153.492 memavail=7290236 print_time=3217.641 buffer_time=2.324 print_stall=0 extruder: target=240 temp=240.0 pwm=0.523
Stats 797992.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4715860 bytes_read=1087910 bytes_retransmit=9 bytes_invalid=0 send_seq=90875 receive_seq=90875 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=80.0 pwm=0.528 sd_pos=719881 sysload=0.46 cputime=153.547 memavail=7290236 print_time=3218.417 buffer_time=2.100 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 797993.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4716699 bytes_read=1088327 bytes_retransmit=9 bytes_invalid=0 send_seq=90900 receive_seq=90900 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=80.0 pwm=0.537 sd_pos=719940 sysload=0.46 cputime=153.606 memavail=7290236 print_time=3219.345 buffer_time=2.027 print_stall=0 extruder: target=240 temp=240.1 pwm=0.419
Stats 797994.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4718107 bytes_read=1088765 bytes_retransmit=9 bytes_invalid=0 send_seq=90932 receive_seq=90932 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.508 sd_pos=720057 sysload=0.50 cputime=153.669 memavail=7290236 print_time=3220.550 buffer_time=2.231 print_stall=0 extruder: target=240 temp=240.0 pwm=0.489
Stats 797995.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=4721372 bytes_read=1089378 bytes_retransmit=9 bytes_invalid=0 send_seq=90996 receive_seq=90996 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=720707 sysload=0.50 cputime=153.737 memavail=7290236 print_time=3221.499 buffer_time=2.179 print_stall=0 extruder: target=240 temp=240.2 pwm=0.393
Stats 797996.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4726955 bytes_read=1090200 bytes_retransmit=9 bytes_invalid=0 send_seq=91099 receive_seq=91099 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=80 temp=80.0 pwm=0.543 sd_pos=722171 sysload=0.50 cputime=153.827 memavail=7290680 print_time=3222.458 buffer_time=2.137 print_stall=0 extruder: target=240 temp=240.0 pwm=0.520
Stats 797997.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4729997 bytes_read=1090757 bytes_retransmit=9 bytes_invalid=0 send_seq=91156 receive_seq=91156 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=3286 freq=119992792 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=723254 sysload=0.50 cputime=153.921 memavail=7290752 print_time=3223.876 buffer_time=2.554 print_stall=0 extruder: target=240 temp=240.0 pwm=0.540
Stats 797998.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4735590 bytes_read=1091517 bytes_retransmit=9 bytes_invalid=0 send_seq=91251 receive_seq=91251 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=602 freq=119992787 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=723426 sysload=0.50 cputime=154.016 memavail=7290752 print_time=3224.386 buffer_time=2.063 print_stall=0 extruder: target=240 temp=240.0 pwm=0.505
Stats 797999.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4740486 bytes_read=1092236 bytes_retransmit=9 bytes_invalid=0 send_seq=91337 receive_seq=91337 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=1012 freq=119992792 heater_bed: target=80 temp=80.0 pwm=0.368 sd_pos=724048 sysload=0.46 cputime=154.116 memavail=7290912 print_time=3225.486 buffer_time=2.162 print_stall=0 extruder: target=240 temp=240.0 pwm=0.521
Stats 798000.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4745224 bytes_read=1092924 bytes_retransmit=9 bytes_invalid=0 send_seq=91419 receive_seq=91419 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=2309 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.519 sd_pos=724933 sysload=0.46 cputime=154.221 memavail=7291008 print_time=3226.988 buffer_time=2.663 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 798001.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4750019 bytes_read=1093643 bytes_retransmit=9 bytes_invalid=0 send_seq=91501 receive_seq=91501 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=83 freq=119992798 heater_bed: target=80 temp=80.0 pwm=0.519 sd_pos=725077 sysload=0.46 cputime=154.308 memavail=7291008 print_time=3227.451 buffer_time=2.125 print_stall=0 extruder: target=240 temp=240.1 pwm=0.427
Stats 798002.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4754367 bytes_read=1094325 bytes_retransmit=9 bytes_invalid=0 send_seq=91579 receive_seq=91579 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=831 freq=119992795 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=725698 sysload=0.46 cputime=154.408 memavail=7291008 print_time=3228.551 buffer_time=2.225 print_stall=0 extruder: target=240 temp=240.1 pwm=0.468
Stats 798003.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4759007 bytes_read=1095008 bytes_retransmit=9 bytes_invalid=0 send_seq=91660 receive_seq=91660 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=1973 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.526 sd_pos=726591 sysload=0.46 cputime=154.512 memavail=7291008 print_time=3229.930 buffer_time=2.603 print_stall=0 extruder: target=240 temp=240.2 pwm=0.411
Stats 798004.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4763510 bytes_read=1095696 bytes_retransmit=9 bytes_invalid=0 send_seq=91739 receive_seq=91739 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=914 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=727374 sysload=0.42 cputime=154.617 memavail=7290252 print_time=3230.562 buffer_time=2.234 print_stall=0 extruder: target=240 temp=239.9 pwm=0.582
Stats 798005.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4768111 bytes_read=1096383 bytes_retransmit=9 bytes_invalid=0 send_seq=91818 receive_seq=91818 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=624 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=727953 sysload=0.42 cputime=154.697 memavail=7290460 print_time=3231.526 buffer_time=2.198 print_stall=0 extruder: target=240 temp=239.8 pwm=0.539
Stats 798006.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4772655 bytes_read=1097072 bytes_retransmit=9 bytes_invalid=0 send_seq=91897 receive_seq=91897 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=276 freq=119992808 heater_bed: target=80 temp=80.0 pwm=0.538 sd_pos=728395 sysload=0.42 cputime=154.779 memavail=7290400 print_time=3232.465 buffer_time=2.137 print_stall=0 extruder: target=240 temp=239.9 pwm=0.475
Stats 798007.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4774763 bytes_read=1097580 bytes_retransmit=9 bytes_invalid=0 send_seq=91940 receive_seq=91940 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992798 heater_bed: target=80 temp=80.0 pwm=0.524 sd_pos=728449 sysload=0.42 cputime=154.836 memavail=7290468 print_time=3233.670 buffer_time=2.341 print_stall=0 extruder: target=240 temp=240.0 pwm=0.457
Stats 798008.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4776074 bytes_read=1098032 bytes_retransmit=9 bytes_invalid=0 send_seq=91972 receive_seq=91972 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=728588 sysload=0.42 cputime=154.876 memavail=7290468 print_time=3234.511 buffer_time=2.181 print_stall=0 extruder: target=240 temp=240.3 pwm=0.397
Stats 798009.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4776889 bytes_read=1098420 bytes_retransmit=9 bytes_invalid=0 send_seq=91994 receive_seq=91994 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=728713 sysload=0.39 cputime=154.939 memavail=7290468 print_time=3235.509 buffer_time=2.178 print_stall=0 extruder: target=240 temp=240.3 pwm=0.400
Stats 798010.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4778199 bytes_read=1098878 bytes_retransmit=9 bytes_invalid=0 send_seq=92024 receive_seq=92024 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.1 pwm=0.397 sd_pos=728835 sysload=0.39 cputime=154.997 memavail=7290628 print_time=3236.685 buffer_time=2.354 print_stall=0 extruder: target=240 temp=240.0 pwm=0.537
Stats 798011.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4781411 bytes_read=1099495 bytes_retransmit=9 bytes_invalid=0 send_seq=92089 receive_seq=92089 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.1 pwm=0.394 sd_pos=729265 sysload=0.39 cputime=155.060 memavail=7290724 print_time=3237.365 buffer_time=2.032 print_stall=0 extruder: target=240 temp=240.0 pwm=0.509
Stats 798012.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4786924 bytes_read=1100284 bytes_retransmit=9 bytes_invalid=0 send_seq=92189 receive_seq=92189 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1975 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.488 sd_pos=730777 sysload=0.39 cputime=155.155 memavail=7290724 print_time=3238.800 buffer_time=2.467 print_stall=0 extruder: target=240 temp=239.8 pwm=0.569
Stats 798013.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4790659 bytes_read=1100902 bytes_retransmit=9 bytes_invalid=0 send_seq=92254 receive_seq=92254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=3248 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.481 sd_pos=731940 sysload=0.39 cputime=155.258 memavail=7290724 print_time=3239.710 buffer_time=2.376 print_stall=0 extruder: target=240 temp=239.9 pwm=0.462
Stats 798014.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4796118 bytes_read=1101664 bytes_retransmit=9 bytes_invalid=0 send_seq=92348 receive_seq=92348 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=2415 freq=119992766 heater_bed: target=80 temp=80.1 pwm=0.481 sd_pos=733143 sysload=0.36 cputime=155.367 memavail=7290724 print_time=3240.574 buffer_time=2.239 print_stall=0 extruder: target=240 temp=240.0 pwm=0.459
Stats 798015.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=4801490 bytes_read=1102397 bytes_retransmit=9 bytes_invalid=0 send_seq=92439 receive_seq=92439 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=80.0 pwm=0.481 sd_pos=733753 sysload=0.36 cputime=155.463 memavail=7290728 print_time=3241.403 buffer_time=2.068 print_stall=0 extruder: target=240 temp=239.9 pwm=0.526
Stats 798016.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4802904 bytes_read=1102866 bytes_retransmit=9 bytes_invalid=0 send_seq=92471 receive_seq=92471 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=80 temp=80.0 pwm=0.447 sd_pos=733842 sysload=0.36 cputime=155.523 memavail=7290476 print_time=3242.551 buffer_time=2.215 print_stall=0 extruder: target=240 temp=240.0 pwm=0.526
Stats 798017.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4804110 bytes_read=1103308 bytes_retransmit=9 bytes_invalid=0 send_seq=92501 receive_seq=92501 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=733952 sysload=0.36 cputime=155.581 memavail=7290728 print_time=3243.621 buffer_time=2.285 print_stall=0 extruder: target=240 temp=240.2 pwm=0.440
Stats 798018.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4805390 bytes_read=1103736 bytes_retransmit=9 bytes_invalid=0 send_seq=92531 receive_seq=92531 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=734069 sysload=0.36 cputime=155.633 memavail=7290728 print_time=3244.541 buffer_time=2.204 print_stall=0 extruder: target=240 temp=240.2 pwm=0.433
Stats 798019.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4809145 bytes_read=1104374 bytes_retransmit=9 bytes_invalid=0 send_seq=92600 receive_seq=92600 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=734777 sysload=0.33 cputime=155.706 memavail=7290980 print_time=3246.140 buffer_time=2.803 print_stall=0 extruder: target=240 temp=240.2 pwm=0.493
Stats 798020.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4812396 bytes_read=1104991 bytes_retransmit=9 bytes_invalid=0 send_seq=92665 receive_seq=92665 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=735580 sysload=0.33 cputime=155.771 memavail=7290980 print_time=3246.698 buffer_time=2.361 print_stall=0 extruder: target=240 temp=240.2 pwm=0.442
Stats 798021.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4815400 bytes_read=1105575 bytes_retransmit=9 bytes_invalid=0 send_seq=92723 receive_seq=92723 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=3474 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=736709 sysload=0.33 cputime=155.848 memavail=7290980 print_time=3247.961 buffer_time=2.623 print_stall=0 extruder: target=240 temp=240.3 pwm=0.389
Stats 798022.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4819822 bytes_read=1106243 bytes_retransmit=9 bytes_invalid=0 send_seq=92799 receive_seq=92798 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1625 freq=119992815 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=736882 sysload=0.33 cputime=155.934 memavail=7290756 print_time=3248.420 buffer_time=2.082 print_stall=0 extruder: target=240 temp=239.8 pwm=0.575
Stats 798023.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4825492 bytes_read=1107030 bytes_retransmit=9 bytes_invalid=0 send_seq=92897 receive_seq=92897 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=2129 freq=119992814 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=737555 sysload=0.33 cputime=156.034 memavail=7290756 print_time=3249.950 buffer_time=2.612 print_stall=0 extruder: target=240 temp=239.9 pwm=0.468
Stats 798024.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4830632 bytes_read=1107763 bytes_retransmit=9 bytes_invalid=0 send_seq=92988 receive_seq=92988 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=268 freq=119992818 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=737988 sysload=0.30 cputime=156.121 memavail=7290756 print_time=3250.724 buffer_time=2.385 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 798025.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=4834478 bytes_read=1108396 bytes_retransmit=9 bytes_invalid=0 send_seq=93056 receive_seq=93056 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=321 freq=119992818 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=738357 sysload=0.30 cputime=156.191 memavail=7290756 print_time=3251.640 buffer_time=2.300 print_stall=0 extruder: target=240 temp=240.1 pwm=0.485
Stats 798026.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4838848 bytes_read=1109104 bytes_retransmit=9 bytes_invalid=0 send_seq=93136 receive_seq=93136 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=543 freq=119992833 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=738829 sysload=0.30 cputime=156.274 memavail=7290504 print_time=3252.715 buffer_time=2.374 print_stall=0 extruder: target=240 temp=240.2 pwm=0.399
Stats 798027.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4843150 bytes_read=1109757 bytes_retransmit=9 bytes_invalid=0 send_seq=93211 receive_seq=93211 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=28 freq=119992824 heater_bed: target=80 temp=80.0 pwm=0.530 sd_pos=739288 sysload=0.30 cputime=156.357 memavail=7290760 print_time=3253.621 buffer_time=2.280 print_stall=0 extruder: target=240 temp=240.1 pwm=0.475
Stats 798028.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4847226 bytes_read=1110415 bytes_retransmit=9 bytes_invalid=0 send_seq=93284 receive_seq=93284 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=1158 freq=119992821 heater_bed: target=80 temp=80.0 pwm=0.554 sd_pos=739820 sysload=0.30 cputime=156.438 memavail=7290760 print_time=3254.825 buffer_time=2.482 print_stall=0 extruder: target=240 temp=239.9 pwm=0.557
Stats 798029.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4851484 bytes_read=1111082 bytes_retransmit=9 bytes_invalid=0 send_seq=93359 receive_seq=93359 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=1000 freq=119992818 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=740528 sysload=0.28 cputime=156.529 memavail=7290760 print_time=3255.641 buffer_time=2.298 print_stall=0 extruder: target=240 temp=240.1 pwm=0.422
Stats 798030.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4855775 bytes_read=1111730 bytes_retransmit=9 bytes_invalid=0 send_seq=93433 receive_seq=93433 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=505 freq=119992813 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=741200 sysload=0.28 cputime=156.617 memavail=7290760 print_time=3256.468 buffer_time=2.124 print_stall=0 extruder: target=240 temp=240.0 pwm=0.496
Stats 798031.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4860650 bytes_read=1112464 bytes_retransmit=9 bytes_invalid=0 send_seq=93518 receive_seq=93518 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=287 freq=119992865 heater_bed: target=80 temp=80.0 pwm=0.483 sd_pos=741621 sysload=0.28 cputime=156.719 memavail=7290760 print_time=3257.679 buffer_time=2.334 print_stall=0 extruder: target=240 temp=239.8 pwm=0.561
Stats 798032.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4862796 bytes_read=1112979 bytes_retransmit=9 bytes_invalid=0 send_seq=93563 receive_seq=93563 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.490 sd_pos=741730 sysload=0.28 cputime=156.777 memavail=7290760 print_time=3258.535 buffer_time=2.189 print_stall=0 extruder: target=240 temp=239.8 pwm=0.598
Stats 798033.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4863967 bytes_read=1113390 bytes_retransmit=9 bytes_invalid=0 send_seq=93591 receive_seq=93591 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992868 heater_bed: target=80 temp=80.0 pwm=0.519 sd_pos=741785 sysload=0.28 cputime=156.828 memavail=7290760 print_time=3259.439 buffer_time=2.092 print_stall=0 extruder: target=240 temp=239.9 pwm=0.460
Stats 798034.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4865337 bytes_read=1113830 bytes_retransmit=9 bytes_invalid=0 send_seq=93622 receive_seq=93622 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992866 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=741952 sysload=0.26 cputime=156.894 memavail=7290496 print_time=3260.788 buffer_time=2.441 print_stall=0 extruder: target=240 temp=239.7 pwm=0.592
Stats 798035.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4866454 bytes_read=1114256 bytes_retransmit=9 bytes_invalid=0 send_seq=93649 receive_seq=93649 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992888 heater_bed: target=80 temp=80.0 pwm=0.557 sd_pos=742008 sysload=0.26 cputime=156.955 memavail=7290500 print_time=3261.378 buffer_time=2.029 print_stall=0 extruder: target=240 temp=240.0 pwm=0.497
Stats 798036.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4870473 bytes_read=1114934 bytes_retransmit=9 bytes_invalid=0 send_seq=93726 receive_seq=93726 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992876 heater_bed: target=80 temp=80.0 pwm=0.485 sd_pos=742613 sysload=0.26 cputime=157.032 memavail=7289744 print_time=3262.975 buffer_time=2.626 print_stall=0 extruder: target=240 temp=240.1 pwm=0.477
Stats 798037.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4873269 bytes_read=1115507 bytes_retransmit=9 bytes_invalid=0 send_seq=93782 receive_seq=93782 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=743122 sysload=0.26 cputime=157.090 memavail=7290000 print_time=3263.468 buffer_time=2.118 print_stall=0 extruder: target=240 temp=240.2 pwm=0.416
Stats 798038.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4877020 bytes_read=1116149 bytes_retransmit=9 bytes_invalid=0 send_seq=93852 receive_seq=93852 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=2021 freq=119992865 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=744226 sysload=0.26 cputime=157.173 memavail=7290000 print_time=3264.624 buffer_time=2.274 print_stall=0 extruder: target=240 temp=240.0 pwm=0.538
Stats 798039.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4882080 bytes_read=1116852 bytes_retransmit=9 bytes_invalid=0 send_seq=93937 receive_seq=93937 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=2763 freq=119992855 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=745446 sysload=0.24 cputime=157.284 memavail=7290000 print_time=3265.714 buffer_time=2.362 print_stall=0 extruder: target=240 temp=239.9 pwm=0.538
Stats 798040.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4887231 bytes_read=1117580 bytes_retransmit=9 bytes_invalid=0 send_seq=94024 receive_seq=94024 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=2558 freq=119992850 heater_bed: target=80 temp=80.0 pwm=0.537 sd_pos=746664 sysload=0.24 cputime=157.396 memavail=7290000 print_time=3266.821 buffer_time=2.469 print_stall=0 extruder: target=240 temp=239.8 pwm=0.493
Stats 798041.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4890979 bytes_read=1118218 bytes_retransmit=9 bytes_invalid=0 send_seq=94090 receive_seq=94090 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992843 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=746718 sysload=0.24 cputime=157.478 memavail=7290000 print_time=3267.579 buffer_time=2.226 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 798042.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4892630 bytes_read=1118676 bytes_retransmit=9 bytes_invalid=0 send_seq=94126 receive_seq=94126 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992833 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=746869 sysload=0.24 cputime=157.541 memavail=7290000 print_time=3268.668 buffer_time=2.315 print_stall=0 extruder: target=240 temp=239.9 pwm=0.525
Stats 798043.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4893488 bytes_read=1119089 bytes_retransmit=9 bytes_invalid=0 send_seq=94150 receive_seq=94150 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=746926 sysload=0.24 cputime=157.599 memavail=7290000 print_time=3269.597 buffer_time=2.243 print_stall=0 extruder: target=240 temp=240.1 pwm=0.399
Stats 798044.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4895245 bytes_read=1119571 bytes_retransmit=9 bytes_invalid=0 send_seq=94188 receive_seq=94188 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992852 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=747116 sysload=0.22 cputime=157.661 memavail=7289776 print_time=3271.041 buffer_time=2.686 print_stall=0 extruder: target=240 temp=239.8 pwm=0.584
Stats 798045.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4897912 bytes_read=1120119 bytes_retransmit=9 bytes_invalid=0 send_seq=94242 receive_seq=94242 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992846 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=747555 sysload=0.22 cputime=157.731 memavail=7289776 print_time=3271.677 buffer_time=2.322 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 798046.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4902627 bytes_read=1120857 bytes_retransmit=9 bytes_invalid=0 send_seq=94328 receive_seq=94328 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992841 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=748684 sysload=0.22 cputime=157.812 memavail=7289276 print_time=3272.587 buffer_time=2.231 print_stall=0 extruder: target=240 temp=239.8 pwm=0.515
Stats 798047.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4905972 bytes_read=1121459 bytes_retransmit=9 bytes_invalid=0 send_seq=94390 receive_seq=94390 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1609 freq=119992834 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=749686 sysload=0.22 cputime=157.903 memavail=7289532 print_time=3273.581 buffer_time=2.223 print_stall=0 extruder: target=240 temp=240.1 pwm=0.378
Stats 798048.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4910905 bytes_read=1122162 bytes_retransmit=9 bytes_invalid=0 send_seq=94475 receive_seq=94475 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1766 freq=119992829 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=750573 sysload=0.22 cputime=158.006 memavail=7289532 print_time=3274.546 buffer_time=2.187 print_stall=0 extruder: target=240 temp=240.0 pwm=0.483
Stats 798049.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4915985 bytes_read=1122904 bytes_retransmit=9 bytes_invalid=0 send_seq=94562 receive_seq=94562 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1464 freq=119992826 heater_bed: target=80 temp=80.0 pwm=0.485 sd_pos=751168 sysload=0.20 cputime=158.118 memavail=7289532 print_time=3275.614 buffer_time=2.253 print_stall=0 extruder: target=240 temp=240.0 pwm=0.454
Stats 798050.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=4921147 bytes_read=1123632 bytes_retransmit=9 bytes_invalid=0 send_seq=94652 receive_seq=94652 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=80.0 pwm=0.485 sd_pos=751923 sysload=0.20 cputime=158.218 memavail=7289532 print_time=3276.489 buffer_time=2.127 print_stall=0 extruder: target=240 temp=240.0 pwm=0.509
Stats 798051.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4922763 bytes_read=1124101 bytes_retransmit=9 bytes_invalid=0 send_seq=94687 receive_seq=94687 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=80.0 pwm=0.485 sd_pos=752010 sysload=0.20 cputime=158.300 memavail=7291236 print_time=3277.625 buffer_time=2.263 print_stall=0 extruder: target=240 temp=239.8 pwm=0.614
Stats 798052.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4925241 bytes_read=1124663 bytes_retransmit=9 bytes_invalid=0 send_seq=94738 receive_seq=94738 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=80.0 pwm=0.485 sd_pos=752467 sysload=0.20 cputime=158.369 memavail=7291236 print_time=3278.417 buffer_time=2.054 print_stall=0 extruder: target=240 temp=240.1 pwm=0.437
Stats 798053.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4927951 bytes_read=1125206 bytes_retransmit=9 bytes_invalid=0 send_seq=94791 receive_seq=94791 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992875 heater_bed: target=80 temp=80.0 pwm=0.511 sd_pos=752898 sysload=0.20 cputime=158.439 memavail=7291236 print_time=3279.638 buffer_time=2.275 print_stall=0 extruder: target=240 temp=239.8 pwm=0.575
Stats 798054.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4929116 bytes_read=1125624 bytes_retransmit=9 bytes_invalid=0 send_seq=94819 receive_seq=94819 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.511 sd_pos=752956 sysload=0.18 cputime=158.477 memavail=7291236 print_time=3280.543 buffer_time=2.179 print_stall=0 extruder: target=240 temp=239.8 pwm=0.602
Stats 798055.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4930524 bytes_read=1126101 bytes_retransmit=9 bytes_invalid=0 send_seq=94853 receive_seq=94853 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992857 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=753187 sysload=0.18 cputime=158.534 memavail=7291236 print_time=3281.391 buffer_time=2.027 print_stall=0 extruder: target=240 temp=240.1 pwm=0.464
Stats 798056.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4936803 bytes_read=1126964 bytes_retransmit=9 bytes_invalid=0 send_seq=94967 receive_seq=94967 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=754241 sysload=0.18 cputime=158.598 memavail=7291236 print_time=3282.828 buffer_time=2.463 print_stall=0 extruder: target=240 temp=240.1 pwm=0.448
Stats 798057.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4939932 bytes_read=1127527 bytes_retransmit=9 bytes_invalid=0 send_seq=95024 receive_seq=95024 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=59 freq=119992863 heater_bed: target=80 temp=80.0 pwm=0.508 sd_pos=754618 sysload=0.18 cputime=158.681 memavail=7291236 print_time=3283.556 buffer_time=2.190 print_stall=0 extruder: target=240 temp=240.2 pwm=0.389
Stats 798058.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4943980 bytes_read=1128189 bytes_retransmit=9 bytes_invalid=0 send_seq=95095 receive_seq=95095 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1699 freq=119992860 heater_bed: target=80 temp=80.0 pwm=0.525 sd_pos=755992 sysload=0.18 cputime=158.787 memavail=7291236 print_time=3284.558 buffer_time=2.192 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 798059.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4948588 bytes_read=1128867 bytes_retransmit=9 bytes_invalid=0 send_seq=95175 receive_seq=95175 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=2676 freq=119992848 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=756897 sysload=0.17 cputime=158.893 memavail=7291012 print_time=3285.757 buffer_time=2.389 print_stall=0 extruder: target=240 temp=240.1 pwm=0.464
Stats 798060.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=4954335 bytes_read=1129630 bytes_retransmit=9 bytes_invalid=0 send_seq=95272 receive_seq=95272 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=1412 freq=119992840 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=757483 sysload=0.17 cputime=159.003 memavail=7291012 print_time=3286.822 buffer_time=2.453 print_stall=0 extruder: target=240 temp=240.2 pwm=0.414
Stats 798061.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4959164 bytes_read=1130378 bytes_retransmit=9 bytes_invalid=0 send_seq=95357 receive_seq=95357 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=2922 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=758147 sysload=0.17 cputime=159.097 memavail=7291012 print_time=3288.281 buffer_time=2.904 print_stall=0 extruder: target=240 temp=239.8 pwm=0.563
Stats 798062.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4963697 bytes_read=1131051 bytes_retransmit=9 bytes_invalid=0 send_seq=95436 receive_seq=95436 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=1710 freq=119992860 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=758739 sysload=0.17 cputime=159.187 memavail=7291012 print_time=3288.948 buffer_time=2.571 print_stall=0 extruder: target=240 temp=240.0 pwm=0.513
Stats 798063.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4968069 bytes_read=1131709 bytes_retransmit=9 bytes_invalid=0 send_seq=95512 receive_seq=95512 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=705 freq=119992853 heater_bed: target=80 temp=80.0 pwm=0.538 sd_pos=759227 sysload=0.17 cputime=159.288 memavail=7291012 print_time=3289.695 buffer_time=2.318 print_stall=0 extruder: target=240 temp=239.9 pwm=0.542
Stats 798064.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4972156 bytes_read=1132376 bytes_retransmit=9 bytes_invalid=0 send_seq=95584 receive_seq=95584 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=759830 sysload=0.15 cputime=159.383 memavail=7290552 print_time=3290.502 buffer_time=2.124 print_stall=0 extruder: target=240 temp=240.0 pwm=0.453
Stats 798065.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4976730 bytes_read=1133070 bytes_retransmit=9 bytes_invalid=0 send_seq=95664 receive_seq=95664 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=1465 freq=119992840 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=761274 sysload=0.15 cputime=159.488 memavail=7290552 print_time=3292.072 buffer_time=2.693 print_stall=0 extruder: target=240 temp=239.9 pwm=0.536
Stats 798066.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4979242 bytes_read=1133603 bytes_retransmit=9 bytes_invalid=0 send_seq=95712 receive_seq=95712 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119992846 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=761304 sysload=0.15 cputime=159.558 memavail=7290048 print_time=3292.705 buffer_time=2.325 print_stall=0 extruder: target=240 temp=239.8 pwm=0.578
Stats 798067.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4981143 bytes_read=1134100 bytes_retransmit=9 bytes_invalid=0 send_seq=95753 receive_seq=95753 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992835 heater_bed: target=80 temp=80.0 pwm=0.494 sd_pos=761594 sysload=0.15 cputime=159.618 memavail=7290048 print_time=3293.389 buffer_time=2.007 print_stall=0 extruder: target=240 temp=239.8 pwm=0.591
Stats 798068.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4985927 bytes_read=1134810 bytes_retransmit=9 bytes_invalid=0 send_seq=95840 receive_seq=95840 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=762680 sysload=0.15 cputime=159.695 memavail=7290052 print_time=3294.421 buffer_time=2.039 print_stall=0 extruder: target=240 temp=239.9 pwm=0.524
Stats 798069.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4988832 bytes_read=1135385 bytes_retransmit=9 bytes_invalid=0 send_seq=95898 receive_seq=95898 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=20 freq=119992822 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=763225 sysload=0.22 cputime=159.767 memavail=7290052 print_time=3295.509 buffer_time=2.126 print_stall=0 extruder: target=240 temp=240.3 pwm=0.341
Stats 798070.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=4991669 bytes_read=1135956 bytes_retransmit=9 bytes_invalid=0 send_seq=95955 receive_seq=95955 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=90 freq=119992817 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=764176 sysload=0.22 cputime=159.836 memavail=7290052 print_time=3296.412 buffer_time=2.028 print_stall=0 extruder: target=240 temp=240.1 pwm=0.512
Stats 798071.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4996487 bytes_read=1136689 bytes_retransmit=9 bytes_invalid=0 send_seq=96043 receive_seq=96043 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=140 freq=119992810 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=765328 sysload=0.22 cputime=159.915 memavail=7290052 print_time=3297.769 buffer_time=2.385 print_stall=0 extruder: target=240 temp=240.2 pwm=0.410
Stats 798072.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=4999883 bytes_read=1137343 bytes_retransmit=9 bytes_invalid=0 send_seq=96113 receive_seq=96113 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=90 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=766200 sysload=0.22 cputime=159.981 memavail=7290052 print_time=3298.718 buffer_time=2.333 print_stall=0 extruder: target=240 temp=239.9 pwm=0.565
Stats 798073.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5002941 bytes_read=1137930 bytes_retransmit=9 bytes_invalid=0 send_seq=96172 receive_seq=96172 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=90 freq=119992798 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=767022 sysload=0.22 cputime=160.052 memavail=7290052 print_time=3299.599 buffer_time=2.214 print_stall=0 extruder: target=240 temp=239.8 pwm=0.603
Stats 798074.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5005079 bytes_read=1138448 bytes_retransmit=9 bytes_invalid=0 send_seq=96220 receive_seq=96220 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=30 freq=119992820 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=767099 sysload=0.20 cputime=160.114 memavail=7290052 print_time=3300.586 buffer_time=2.201 print_stall=0 extruder: target=240 temp=239.9 pwm=0.468
Stats 798075.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5006458 bytes_read=1138896 bytes_retransmit=9 bytes_invalid=0 send_seq=96251 receive_seq=96251 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=20 freq=119992816 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=767679 sysload=0.20 cputime=160.175 memavail=7290052 print_time=3301.430 buffer_time=2.044 print_stall=0 extruder: target=240 temp=239.9 pwm=0.447
Stats 798076.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5011167 bytes_read=1139634 bytes_retransmit=9 bytes_invalid=0 send_seq=96337 receive_seq=96337 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=70 freq=119992807 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=769165 sysload=0.20 cputime=160.256 memavail=7290052 print_time=3303.188 buffer_time=2.801 print_stall=0 extruder: target=240 temp=240.1 pwm=0.447
Stats 798077.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5014567 bytes_read=1140232 bytes_retransmit=9 bytes_invalid=0 send_seq=96401 receive_seq=96401 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=70 freq=119992801 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=770046 sysload=0.20 cputime=160.323 memavail=7289828 print_time=3303.814 buffer_time=2.427 print_stall=0 extruder: target=240 temp=240.2 pwm=0.395
Stats 798078.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5017472 bytes_read=1140815 bytes_retransmit=9 bytes_invalid=0 send_seq=96459 receive_seq=96459 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1125 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=770935 sysload=0.20 cputime=160.399 memavail=7289828 print_time=3304.480 buffer_time=2.093 print_stall=0 extruder: target=240 temp=240.2 pwm=0.461
Stats 798079.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5021774 bytes_read=1141482 bytes_retransmit=9 bytes_invalid=0 send_seq=96534 receive_seq=96534 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=4177 freq=119992826 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=772232 sysload=0.35 cputime=160.519 memavail=7289828 print_time=3306.077 buffer_time=2.689 print_stall=0 extruder: target=240 temp=240.2 pwm=0.426
Stats 798080.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5027651 bytes_read=1142260 bytes_retransmit=9 bytes_invalid=0 send_seq=96634 receive_seq=96634 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=1746 freq=119992820 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=772776 sysload=0.35 cputime=160.625 memavail=7289604 print_time=3306.804 buffer_time=2.416 print_stall=0 extruder: target=240 temp=239.7 pwm=0.672
Stats 798081.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5032784 bytes_read=1143004 bytes_retransmit=9 bytes_invalid=0 send_seq=96721 receive_seq=96721 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=1517 freq=119992811 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=773542 sysload=0.35 cputime=160.728 memavail=7289604 print_time=3307.773 buffer_time=2.383 print_stall=0 extruder: target=240 temp=239.7 pwm=0.560
Stats 798082.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5037137 bytes_read=1143671 bytes_retransmit=9 bytes_invalid=0 send_seq=96796 receive_seq=96796 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=420 freq=119992814 heater_bed: target=80 temp=80.1 pwm=0.471 sd_pos=774101 sysload=0.35 cputime=160.824 memavail=7289604 print_time=3308.477 buffer_time=2.087 print_stall=0 extruder: target=240 temp=239.7 pwm=0.557
Stats 798083.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5041992 bytes_read=1144374 bytes_retransmit=9 bytes_invalid=0 send_seq=96881 receive_seq=96881 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=1849 freq=119992830 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=774747 sysload=0.35 cputime=160.929 memavail=7289604 print_time=3310.003 buffer_time=2.611 print_stall=0 extruder: target=240 temp=239.7 pwm=0.593
Stats 798084.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5046719 bytes_read=1145082 bytes_retransmit=9 bytes_invalid=0 send_seq=96964 receive_seq=96964 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=203 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.537 sd_pos=775209 sysload=0.32 cputime=161.023 memavail=7289604 print_time=3310.614 buffer_time=2.222 print_stall=0 extruder: target=240 temp=240.3 pwm=0.321
Stats 798085.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5050683 bytes_read=1145729 bytes_retransmit=9 bytes_invalid=0 send_seq=97035 receive_seq=97035 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=659 freq=119992822 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=775532 sysload=0.32 cputime=161.117 memavail=7289604 print_time=3311.676 buffer_time=2.283 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 798086.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5052337 bytes_read=1146193 bytes_retransmit=9 bytes_invalid=0 send_seq=97069 receive_seq=97069 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=775586 sysload=0.32 cputime=161.175 memavail=7289604 print_time=3312.433 buffer_time=2.039 print_stall=0 extruder: target=240 temp=240.0 pwm=0.512
Stats 798087.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5053977 bytes_read=1146661 bytes_retransmit=9 bytes_invalid=0 send_seq=97104 receive_seq=97104 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992813 heater_bed: target=80 temp=80.0 pwm=0.513 sd_pos=775725 sysload=0.32 cputime=161.238 memavail=7289608 print_time=3313.523 buffer_time=2.128 print_stall=0 extruder: target=240 temp=239.9 pwm=0.507
Stats 798088.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5054851 bytes_read=1147078 bytes_retransmit=9 bytes_invalid=0 send_seq=97129 receive_seq=97129 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=775782 sysload=0.32 cputime=161.297 memavail=7289608 print_time=3314.451 buffer_time=2.056 print_stall=0 extruder: target=240 temp=240.1 pwm=0.415
Stats 798089.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5056603 bytes_read=1147541 bytes_retransmit=9 bytes_invalid=0 send_seq=97166 receive_seq=97166 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.513 sd_pos=775960 sysload=0.29 cputime=161.355 memavail=7289608 print_time=3315.895 buffer_time=2.499 print_stall=0 extruder: target=240 temp=239.9 pwm=0.524
Stats 798090.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5059751 bytes_read=1148139 bytes_retransmit=9 bytes_invalid=0 send_seq=97227 receive_seq=97227 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.1 pwm=0.410 sd_pos=776530 sysload=0.29 cputime=161.420 memavail=7289608 print_time=3316.631 buffer_time=2.234 print_stall=0 extruder: target=240 temp=240.0 pwm=0.458
Stats 798091.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5065239 bytes_read=1148941 bytes_retransmit=9 bytes_invalid=0 send_seq=97326 receive_seq=97326 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=620 freq=119992791 heater_bed: target=80 temp=80.1 pwm=0.491 sd_pos=778049 sysload=0.29 cputime=161.504 memavail=7289608 print_time=3317.795 buffer_time=2.396 print_stall=0 extruder: target=240 temp=239.9 pwm=0.554
Stats 798092.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5068057 bytes_read=1149474 bytes_retransmit=9 bytes_invalid=0 send_seq=97377 receive_seq=97377 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=4041 freq=119992797 heater_bed: target=80 temp=80.1 pwm=0.491 sd_pos=779479 sysload=0.29 cputime=161.602 memavail=7289608 print_time=3318.984 buffer_time=2.585 print_stall=0 extruder: target=240 temp=239.9 pwm=0.468
Stats 798093.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5073378 bytes_read=1150217 bytes_retransmit=9 bytes_invalid=0 send_seq=97467 receive_seq=97467 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2271 freq=119992796 heater_bed: target=80 temp=80.1 pwm=0.431 sd_pos=780064 sysload=0.29 cputime=161.705 memavail=7289608 print_time=3319.613 buffer_time=2.213 print_stall=0 extruder: target=240 temp=239.9 pwm=0.452
Stats 798094.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5078721 bytes_read=1150964 bytes_retransmit=9 bytes_invalid=0 send_seq=97558 receive_seq=97558 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=308 freq=119992793 heater_bed: target=80 temp=80.1 pwm=0.345 sd_pos=780820 sysload=0.27 cputime=161.823 memavail=7289320 print_time=3320.354 buffer_time=1.952 print_stall=0 extruder: target=240 temp=240.0 pwm=0.450
Stats 798095.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5081020 bytes_read=1151483 bytes_retransmit=9 bytes_invalid=0 send_seq=97603 receive_seq=97603 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.1 pwm=0.389 sd_pos=780987 sysload=0.27 cputime=161.899 memavail=7289320 print_time=3321.415 buffer_time=2.013 print_stall=0 extruder: target=240 temp=239.8 pwm=0.597
Stats 798096.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5084458 bytes_read=1152111 bytes_retransmit=9 bytes_invalid=0 send_seq=97670 receive_seq=97670 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=80.1 pwm=0.442 sd_pos=782246 sysload=0.27 cputime=161.983 memavail=7289320 print_time=3322.459 buffer_time=2.055 print_stall=0 extruder: target=240 temp=240.0 pwm=0.454
Stats 798097.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5088743 bytes_read=1152798 bytes_retransmit=9 bytes_invalid=0 send_seq=97749 receive_seq=97749 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.1 pwm=0.501 sd_pos=783810 sysload=0.27 cputime=162.086 memavail=7289076 print_time=3323.416 buffer_time=2.010 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 798098.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5091694 bytes_read=1153351 bytes_retransmit=9 bytes_invalid=0 send_seq=97804 receive_seq=97804 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.1 pwm=0.433 sd_pos=784210 sysload=0.27 cputime=162.166 memavail=7289076 print_time=3324.888 buffer_time=2.481 print_stall=0 extruder: target=240 temp=240.3 pwm=0.359
Stats 798099.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5093090 bytes_read=1153794 bytes_retransmit=9 bytes_invalid=0 send_seq=97834 receive_seq=97834 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.1 pwm=0.433 sd_pos=784728 sysload=0.25 cputime=162.235 memavail=7289076 print_time=3325.739 buffer_time=2.331 print_stall=0 extruder: target=240 temp=240.0 pwm=0.502
Stats 798100.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5095880 bytes_read=1154377 bytes_retransmit=9 bytes_invalid=0 send_seq=97889 receive_seq=97889 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.1 pwm=0.499 sd_pos=785501 sysload=0.25 cputime=162.317 memavail=7289076 print_time=3326.691 buffer_time=2.282 print_stall=0 extruder: target=240 temp=239.9 pwm=0.515
Stats 798101.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5098552 bytes_read=1154915 bytes_retransmit=9 bytes_invalid=0 send_seq=97941 receive_seq=97941 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=80 temp=80.1 pwm=0.499 sd_pos=786116 sysload=0.25 cputime=162.390 memavail=7289076 print_time=3327.472 buffer_time=2.062 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 798102.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5101589 bytes_read=1155498 bytes_retransmit=9 bytes_invalid=0 send_seq=97999 receive_seq=97999 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=786738 sysload=0.25 cputime=162.460 memavail=7289076 print_time=3328.410 buffer_time=2.000 print_stall=0 extruder: target=240 temp=239.8 pwm=0.563
Stats 798103.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5107757 bytes_read=1156360 bytes_retransmit=9 bytes_invalid=0 send_seq=98113 receive_seq=98113 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=322 freq=119992795 heater_bed: target=80 temp=80.0 pwm=0.558 sd_pos=788241 sysload=0.25 cputime=162.551 memavail=7289076 print_time=3330.298 buffer_time=2.886 print_stall=0 extruder: target=240 temp=240.3 pwm=0.342
Stats 798104.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5111202 bytes_read=1156964 bytes_retransmit=9 bytes_invalid=0 send_seq=98179 receive_seq=98179 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1957 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.550 sd_pos=789355 sysload=0.23 cputime=162.623 memavail=7289076 print_time=3331.284 buffer_time=2.872 print_stall=0 extruder: target=240 temp=240.0 pwm=0.491
Stats 798105.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5114077 bytes_read=1157509 bytes_retransmit=9 bytes_invalid=0 send_seq=98231 receive_seq=98231 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=3041 freq=119992787 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=789935 sysload=0.23 cputime=162.706 memavail=7289076 print_time=3332.138 buffer_time=2.725 print_stall=0 extruder: target=240 temp=239.9 pwm=0.480
Stats 798106.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5118156 bytes_read=1158167 bytes_retransmit=9 bytes_invalid=0 send_seq=98302 receive_seq=98302 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=3371 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=790710 sysload=0.23 cputime=162.802 memavail=7288852 print_time=3332.935 buffer_time=2.522 print_stall=0 extruder: target=240 temp=240.1 pwm=0.478
Stats 798107.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5123332 bytes_read=1158885 bytes_retransmit=9 bytes_invalid=0 send_seq=98390 receive_seq=98390 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=1526 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=791616 sysload=0.23 cputime=162.907 memavail=7289108 print_time=3333.656 buffer_time=2.242 print_stall=0 extruder: target=240 temp=239.9 pwm=0.478
Stats 798108.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5128734 bytes_read=1159638 bytes_retransmit=9 bytes_invalid=0 send_seq=98482 receive_seq=98482 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=806 freq=119992785 heater_bed: target=80 temp=80.1 pwm=0.423 sd_pos=792472 sysload=0.23 cputime=163.012 memavail=7289108 print_time=3334.609 buffer_time=2.195 print_stall=0 extruder: target=240 temp=240.3 pwm=0.424
Stats 798109.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5133261 bytes_read=1160325 bytes_retransmit=9 bytes_invalid=0 send_seq=98561 receive_seq=98561 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.1 pwm=0.423 sd_pos=793147 sysload=0.21 cputime=163.102 memavail=7289108 print_time=3335.426 buffer_time=2.011 print_stall=0 extruder: target=240 temp=240.2 pwm=0.424
Stats 798110.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5137895 bytes_read=1160998 bytes_retransmit=9 bytes_invalid=0 send_seq=98640 receive_seq=98640 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.0 pwm=0.510 sd_pos=793839 sysload=0.21 cputime=163.202 memavail=7289108 print_time=3336.472 buffer_time=2.056 print_stall=0 extruder: target=240 temp=240.0 pwm=0.564
Stats 798111.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5142686 bytes_read=1161722 bytes_retransmit=9 bytes_invalid=0 send_seq=98723 receive_seq=98723 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=215 freq=119992786 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=794406 sysload=0.21 cputime=163.296 memavail=7289108 print_time=3337.569 buffer_time=2.152 print_stall=0 extruder: target=240 temp=240.0 pwm=0.525
Stats 798112.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5147064 bytes_read=1162394 bytes_retransmit=9 bytes_invalid=0 send_seq=98799 receive_seq=98799 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=2579 freq=119992778 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=797919 sysload=0.21 cputime=163.422 memavail=7289108 print_time=3339.147 buffer_time=2.730 print_stall=0 extruder: target=240 temp=240.1 pwm=0.486
Stats 798113.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5151729 bytes_read=1163067 bytes_retransmit=9 bytes_invalid=0 send_seq=98878 receive_seq=98878 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=1885 freq=119992771 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=798837 sysload=0.21 cputime=163.512 memavail=7289108 print_time=3340.009 buffer_time=2.590 print_stall=0 extruder: target=240 temp=239.8 pwm=0.570
Stats 798114.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5156194 bytes_read=1163755 bytes_retransmit=9 bytes_invalid=0 send_seq=98957 receive_seq=98957 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=1006 freq=119992771 heater_bed: target=80 temp=80.1 pwm=0.345 sd_pos=799282 sysload=0.19 cputime=163.598 memavail=7289108 print_time=3340.771 buffer_time=2.352 print_stall=0 extruder: target=240 temp=240.0 pwm=0.468
Stats 798115.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5160717 bytes_read=1164442 bytes_retransmit=9 bytes_invalid=0 send_seq=99036 receive_seq=99036 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=964 freq=119992774 heater_bed: target=80 temp=80.1 pwm=0.371 sd_pos=800013 sysload=0.19 cputime=163.699 memavail=7289108 print_time=3341.769 buffer_time=2.349 print_stall=0 extruder: target=240 temp=239.9 pwm=0.536
Stats 798116.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5162694 bytes_read=1164936 bytes_retransmit=9 bytes_invalid=0 send_seq=99076 receive_seq=99076 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.2 pwm=0.371 sd_pos=800067 sysload=0.19 cputime=163.769 memavail=7289108 print_time=3342.527 buffer_time=2.106 print_stall=0 extruder: target=240 temp=240.1 pwm=0.491
Stats 798117.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5164339 bytes_read=1165404 bytes_retransmit=9 bytes_invalid=0 send_seq=99111 receive_seq=99111 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992775 heater_bed: target=80 temp=80.2 pwm=0.432 sd_pos=800206 sysload=0.19 cputime=163.830 memavail=7289112 print_time=3343.617 buffer_time=2.195 print_stall=0 extruder: target=240 temp=240.2 pwm=0.427
Stats 798118.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5165198 bytes_read=1165816 bytes_retransmit=9 bytes_invalid=0 send_seq=99135 receive_seq=99135 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.1 pwm=0.496 sd_pos=800263 sysload=0.19 cputime=163.883 memavail=7289112 print_time=3344.545 buffer_time=2.123 print_stall=0 extruder: target=240 temp=240.1 pwm=0.464
Stats 798119.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5166965 bytes_read=1166284 bytes_retransmit=9 bytes_invalid=0 send_seq=99173 receive_seq=99173 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992816 heater_bed: target=80 temp=80.1 pwm=0.554 sd_pos=800441 sysload=0.18 cputime=163.944 memavail=7289112 print_time=3345.989 buffer_time=2.567 print_stall=0 extruder: target=240 temp=239.7 pwm=0.598
Stats 798120.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5170310 bytes_read=1166902 bytes_retransmit=9 bytes_invalid=0 send_seq=99238 receive_seq=99238 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=80 temp=80.1 pwm=0.576 sd_pos=800950 sysload=0.18 cputime=164.016 memavail=7289112 print_time=3346.745 buffer_time=2.322 print_stall=0 extruder: target=240 temp=239.9 pwm=0.469
Stats 798121.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5175602 bytes_read=1167689 bytes_retransmit=9 bytes_invalid=0 send_seq=99334 receive_seq=99334 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=1434 freq=119992802 heater_bed: target=80 temp=80.0 pwm=0.576 sd_pos=802357 sysload=0.18 cputime=164.093 memavail=7289112 print_time=3347.983 buffer_time=2.559 print_stall=0 extruder: target=240 temp=240.3 pwm=0.326
Stats 798122.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5178138 bytes_read=1168207 bytes_retransmit=9 bytes_invalid=0 send_seq=99382 receive_seq=99382 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2244 freq=119992802 heater_bed: target=80 temp=80.0 pwm=0.533 sd_pos=803148 sysload=0.18 cputime=164.173 memavail=7289112 print_time=3348.574 buffer_time=2.149 print_stall=0 extruder: target=240 temp=240.1 pwm=0.453
Stats 798123.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5183687 bytes_read=1168970 bytes_retransmit=9 bytes_invalid=0 send_seq=99476 receive_seq=99476 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=3282 freq=119992810 heater_bed: target=80 temp=80.0 pwm=0.530 sd_pos=804330 sysload=0.18 cputime=164.282 memavail=7289112 print_time=3349.816 buffer_time=2.390 print_stall=0 extruder: target=240 temp=239.9 pwm=0.549
Stats 798124.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5189201 bytes_read=1169737 bytes_retransmit=9 bytes_invalid=0 send_seq=99571 receive_seq=99571 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2362 freq=119992801 heater_bed: target=80 temp=80.0 pwm=0.530 sd_pos=805465 sysload=0.16 cputime=164.403 memavail=7289580 print_time=3350.902 buffer_time=2.476 print_stall=0 extruder: target=240 temp=239.9 pwm=0.466
Stats 798125.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5193400 bytes_read=1170390 bytes_retransmit=9 bytes_invalid=0 send_seq=99646 receive_seq=99646 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.0 pwm=0.569 sd_pos=805522 sysload=0.16 cputime=164.456 memavail=7289580 print_time=3351.550 buffer_time=2.123 print_stall=0 extruder: target=240 temp=239.8 pwm=0.525
Stats 798126.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5195388 bytes_read=1170909 bytes_retransmit=9 bytes_invalid=0 send_seq=99688 receive_seq=99688 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.0 pwm=0.509 sd_pos=805928 sysload=0.16 cputime=164.489 memavail=7289580 print_time=3352.560 buffer_time=2.133 print_stall=0 extruder: target=240 temp=239.9 pwm=0.520
Stats 798127.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5202075 bytes_read=1171796 bytes_retransmit=9 bytes_invalid=0 send_seq=99807 receive_seq=99807 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=807370 sysload=0.16 cputime=164.535 memavail=7289080 print_time=3354.006 buffer_time=2.578 print_stall=0 extruder: target=240 temp=240.1 pwm=0.366
Stats 798128.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5204384 bytes_read=1172309 bytes_retransmit=9 bytes_invalid=0 send_seq=99854 receive_seq=99854 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=77 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=808037 sysload=0.16 cputime=164.603 memavail=7289080 print_time=3354.497 buffer_time=2.069 print_stall=0 extruder: target=240 temp=240.3 pwm=0.323
Stats 798129.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5209416 bytes_read=1173037 bytes_retransmit=9 bytes_invalid=0 send_seq=99941 receive_seq=99941 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=809379 sysload=0.15 cputime=164.687 memavail=7289080 print_time=3355.774 buffer_time=2.345 print_stall=0 extruder: target=240 temp=240.1 pwm=0.414
Stats 798130.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5213126 bytes_read=1173679 bytes_retransmit=9 bytes_invalid=0 send_seq=100011 receive_seq=100011 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=810277 sysload=0.15 cputime=164.757 memavail=7289080 print_time=3356.780 buffer_time=2.350 print_stall=0 extruder: target=240 temp=240.1 pwm=0.478
Stats 798131.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5216137 bytes_read=1174268 bytes_retransmit=9 bytes_invalid=0 send_seq=100070 receive_seq=100070 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=811242 sysload=0.15 cputime=164.829 memavail=7289080 print_time=3357.645 buffer_time=2.215 print_stall=0 extruder: target=240 temp=239.9 pwm=0.536
Stats 798132.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5219230 bytes_read=1174871 bytes_retransmit=9 bytes_invalid=0 send_seq=100132 receive_seq=100132 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.0 pwm=0.519 sd_pos=812159 sysload=0.15 cputime=164.906 memavail=7289080 print_time=3358.549 buffer_time=2.118 print_stall=0 extruder: target=240 temp=239.8 pwm=0.552
Stats 798133.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5223558 bytes_read=1175589 bytes_retransmit=9 bytes_invalid=0 send_seq=100215 receive_seq=100215 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=813182 sysload=0.15 cputime=164.973 memavail=7289080 print_time=3359.605 buffer_time=2.174 print_stall=0 extruder: target=240 temp=239.9 pwm=0.462
Stats 798134.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5228181 bytes_read=1176287 bytes_retransmit=9 bytes_invalid=0 send_seq=100299 receive_seq=100299 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=542 freq=119992797 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=814736 sysload=0.14 cputime=165.063 memavail=7289080 print_time=3360.926 buffer_time=2.494 print_stall=0 extruder: target=240 temp=240.1 pwm=0.375
Stats 798135.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5229997 bytes_read=1176770 bytes_retransmit=9 bytes_invalid=0 send_seq=100337 receive_seq=100337 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=814967 sysload=0.14 cputime=165.130 memavail=7289084 print_time=3361.486 buffer_time=2.053 print_stall=0 extruder: target=240 temp=240.3 pwm=0.363
Stats 798136.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5231764 bytes_read=1177263 bytes_retransmit=9 bytes_invalid=0 send_seq=100374 receive_seq=100374 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=815587 sysload=0.14 cputime=165.197 memavail=7288860 print_time=3362.919 buffer_time=2.486 print_stall=0 extruder: target=240 temp=240.3 pwm=0.415
Stats 798137.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5236766 bytes_read=1177986 bytes_retransmit=9 bytes_invalid=0 send_seq=100463 receive_seq=100463 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=80.1 pwm=0.385 sd_pos=816871 sysload=0.14 cputime=165.278 memavail=7288868 print_time=3364.153 buffer_time=2.719 print_stall=0 extruder: target=240 temp=240.3 pwm=0.387
Stats 798138.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5240073 bytes_read=1178604 bytes_retransmit=9 bytes_invalid=0 send_seq=100528 receive_seq=100528 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.1 pwm=0.427 sd_pos=817663 sysload=0.14 cputime=165.347 memavail=7288868 print_time=3364.891 buffer_time=2.457 print_stall=0 extruder: target=240 temp=239.9 pwm=0.558
Stats 798139.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5243183 bytes_read=1179186 bytes_retransmit=9 bytes_invalid=0 send_seq=100586 receive_seq=100586 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=505 freq=119992790 heater_bed: target=80 temp=80.1 pwm=0.358 sd_pos=818301 sysload=0.13 cputime=165.424 memavail=7288868 print_time=3365.738 buffer_time=2.303 print_stall=0 extruder: target=240 temp=240.0 pwm=0.488
Stats 798140.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5247598 bytes_read=1179837 bytes_retransmit=9 bytes_invalid=0 send_seq=100662 receive_seq=100662 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2367 freq=119992846 heater_bed: target=80 temp=80.1 pwm=0.363 sd_pos=819166 sysload=0.13 cputime=165.527 memavail=7288868 print_time=3367.037 buffer_time=2.601 print_stall=0 extruder: target=240 temp=240.4 pwm=0.298
Stats 798141.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5251780 bytes_read=1180503 bytes_retransmit=9 bytes_invalid=0 send_seq=100735 receive_seq=100735 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=97 freq=119992841 heater_bed: target=80 temp=80.1 pwm=0.489 sd_pos=819309 sysload=0.13 cputime=165.616 memavail=7288868 print_time=3367.473 buffer_time=2.037 print_stall=0 extruder: target=240 temp=240.1 pwm=0.515
Stats 798142.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5255816 bytes_read=1181142 bytes_retransmit=9 bytes_invalid=0 send_seq=100805 receive_seq=100805 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=80.1 pwm=0.434 sd_pos=819734 sysload=0.13 cputime=165.715 memavail=7288868 print_time=3368.449 buffer_time=2.012 print_stall=0 extruder: target=240 temp=240.1 pwm=0.501
Stats 798143.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5261266 bytes_read=1181890 bytes_retransmit=9 bytes_invalid=0 send_seq=100899 receive_seq=100899 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=950 freq=119992825 heater_bed: target=80 temp=80.1 pwm=0.434 sd_pos=820924 sysload=0.13 cputime=165.823 memavail=7288868 print_time=3369.897 buffer_time=2.459 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 798144.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5265208 bytes_read=1182528 bytes_retransmit=9 bytes_invalid=0 send_seq=100968 receive_seq=100968 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=987 freq=119992837 heater_bed: target=80 temp=80.1 pwm=0.409 sd_pos=821422 sysload=0.12 cputime=165.904 memavail=7288868 print_time=3370.834 buffer_time=2.396 print_stall=0 extruder: target=240 temp=240.0 pwm=0.479
Stats 798145.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5269670 bytes_read=1183205 bytes_retransmit=9 bytes_invalid=0 send_seq=101045 receive_seq=101045 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=530 freq=119992833 heater_bed: target=80 temp=80.1 pwm=0.482 sd_pos=822208 sysload=0.12 cputime=165.988 memavail=7288868 print_time=3371.680 buffer_time=2.242 print_stall=0 extruder: target=240 temp=240.1 pwm=0.403
Stats 798146.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5273867 bytes_read=1183869 bytes_retransmit=9 bytes_invalid=0 send_seq=101119 receive_seq=101119 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=513 freq=119992832 heater_bed: target=80 temp=80.1 pwm=0.409 sd_pos=822967 sysload=0.12 cputime=166.081 memavail=7288868 print_time=3372.573 buffer_time=2.134 print_stall=0 extruder: target=240 temp=240.2 pwm=0.403
Stats 798147.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5278523 bytes_read=1184577 bytes_retransmit=9 bytes_invalid=0 send_seq=101202 receive_seq=101202 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=106 freq=119992835 heater_bed: target=80 temp=80.1 pwm=0.426 sd_pos=823654 sysload=0.12 cputime=166.182 memavail=7289124 print_time=3373.450 buffer_time=2.010 print_stall=0 extruder: target=240 temp=240.0 pwm=0.428
Stats 798148.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5283182 bytes_read=1185269 bytes_retransmit=9 bytes_invalid=0 send_seq=101282 receive_seq=101282 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=2964 freq=119992830 heater_bed: target=80 temp=80.1 pwm=0.433 sd_pos=825037 sysload=0.12 cputime=166.303 memavail=7289124 print_time=3375.161 buffer_time=2.721 print_stall=0 extruder: target=240 temp=240.1 pwm=0.422
Stats 798149.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5287942 bytes_read=1185962 bytes_retransmit=9 bytes_invalid=0 send_seq=101365 receive_seq=101365 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=2525 freq=119992830 heater_bed: target=80 temp=80.1 pwm=0.433 sd_pos=825938 sysload=0.11 cputime=166.410 memavail=7288900 print_time=3376.027 buffer_time=2.586 print_stall=0 extruder: target=240 temp=240.1 pwm=0.388
Stats 798150.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5292424 bytes_read=1186635 bytes_retransmit=9 bytes_invalid=0 send_seq=101441 receive_seq=101441 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1895 freq=119992828 heater_bed: target=80 temp=80.0 pwm=0.597 sd_pos=826297 sysload=0.11 cputime=166.506 memavail=7288900 print_time=3376.798 buffer_time=2.357 print_stall=0 extruder: target=240 temp=239.8 pwm=0.520
Stats 798151.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5296393 bytes_read=1187303 bytes_retransmit=9 bytes_invalid=0 send_seq=101513 receive_seq=101513 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=80.1 pwm=0.416 sd_pos=826405 sysload=0.11 cputime=166.596 memavail=7288900 print_time=3377.495 buffer_time=2.054 print_stall=0 extruder: target=240 temp=239.9 pwm=0.515
Stats 798152.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5298147 bytes_read=1187776 bytes_retransmit=9 bytes_invalid=0 send_seq=101552 receive_seq=101552 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.0 pwm=0.481 sd_pos=826598 sysload=0.11 cputime=166.663 memavail=7288900 print_time=3379.042 buffer_time=2.600 print_stall=0 extruder: target=240 temp=239.9 pwm=0.475
Stats 798153.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5299024 bytes_read=1188189 bytes_retransmit=9 bytes_invalid=0 send_seq=101576 receive_seq=101576 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992841 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=826655 sysload=0.11 cputime=166.726 memavail=7288900 print_time=3379.970 buffer_time=2.527 print_stall=0 extruder: target=240 temp=240.0 pwm=0.460
Stats 798154.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5300165 bytes_read=1188621 bytes_retransmit=9 bytes_invalid=0 send_seq=101604 receive_seq=101604 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=826711 sysload=0.18 cputime=166.787 memavail=7292052 print_time=3380.560 buffer_time=2.115 print_stall=0 extruder: target=240 temp=240.1 pwm=0.470
Stats 798155.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5304131 bytes_read=1189269 bytes_retransmit=9 bytes_invalid=0 send_seq=101678 receive_seq=101678 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=827291 sysload=0.18 cputime=166.862 memavail=7292208 print_time=3382.192 buffer_time=2.743 print_stall=0 extruder: target=240 temp=240.1 pwm=0.408
Stats 798156.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=5307443 bytes_read=1189898 bytes_retransmit=9 bytes_invalid=0 send_seq=101742 receive_seq=101742 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=80.1 pwm=0.330 sd_pos=827894 sysload=0.18 cputime=166.930 memavail=7292208 print_time=3382.792 buffer_time=2.342 print_stall=0 extruder: target=240 temp=240.3 pwm=0.330
Stats 798157.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=5310406 bytes_read=1190480 bytes_retransmit=9 bytes_invalid=0 send_seq=101800 receive_seq=101800 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=876 freq=119992817 heater_bed: target=80 temp=80.1 pwm=0.311 sd_pos=828579 sysload=0.18 cputime=167.004 memavail=7291732 print_time=3383.494 buffer_time=2.044 print_stall=0 extruder: target=240 temp=239.9 pwm=0.535
Stats 798159.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=5315138 bytes_read=1191168 bytes_retransmit=9 bytes_invalid=0 send_seq=101882 receive_seq=101882 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=2923 freq=119992842 heater_bed: target=80 temp=80.1 pwm=0.445 sd_pos=829951 sysload=0.18 cputime=167.121 memavail=7291732 print_time=3384.731 buffer_time=2.279 print_stall=0 extruder: target=240 temp=239.8 pwm=0.538
Stats 798160.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=5320537 bytes_read=1191921 bytes_retransmit=9 bytes_invalid=0 send_seq=101974 receive_seq=101974 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=3815 freq=119992837 heater_bed: target=80 temp=80.1 pwm=0.445 sd_pos=831351 sysload=0.16 cputime=167.235 memavail=7291732 print_time=3385.911 buffer_time=2.458 print_stall=0 extruder: target=240 temp=240.1 pwm=0.361
Stats 798161.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=5326297 bytes_read=1192703 bytes_retransmit=9 bytes_invalid=0 send_seq=102072 receive_seq=102072 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1001 freq=119992826 heater_bed: target=80 temp=80.1 pwm=0.361 sd_pos=831573 sysload=0.16 cputime=167.338 memavail=7291732 print_time=3386.784 buffer_time=2.331 print_stall=0 extruder: target=240 temp=240.0 pwm=0.423
Stats 798162.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5329833 bytes_read=1193322 bytes_retransmit=9 bytes_invalid=0 send_seq=102137 receive_seq=102137 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992824 heater_bed: target=80 temp=80.1 pwm=0.361 sd_pos=831979 sysload=0.16 cputime=167.404 memavail=7291732 print_time=3388.055 buffer_time=2.600 print_stall=0 extruder: target=240 temp=239.8 pwm=0.572
Stats 798163.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5334099 bytes_read=1194025 bytes_retransmit=9 bytes_invalid=0 send_seq=102219 receive_seq=102219 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992884 heater_bed: target=80 temp=80.1 pwm=0.394 sd_pos=832979 sysload=0.16 cputime=167.469 memavail=7291732 print_time=3388.902 buffer_time=2.447 print_stall=0 extruder: target=240 temp=240.0 pwm=0.413
Stats 798164.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5337412 bytes_read=1194637 bytes_retransmit=9 bytes_invalid=0 send_seq=102283 receive_seq=102283 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=325 freq=119992871 heater_bed: target=80 temp=80.1 pwm=0.474 sd_pos=834275 sysload=0.16 cputime=167.542 memavail=7291732 print_time=3389.711 buffer_time=2.255 print_stall=0 extruder: target=240 temp=240.1 pwm=0.413
Stats 798165.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5340071 bytes_read=1195185 bytes_retransmit=9 bytes_invalid=0 send_seq=102337 receive_seq=102337 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992860 heater_bed: target=80 temp=80.1 pwm=0.493 sd_pos=834564 sysload=0.15 cputime=167.619 memavail=7291732 print_time=3390.939 buffer_time=2.482 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 798166.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5341684 bytes_read=1195688 bytes_retransmit=9 bytes_invalid=0 send_seq=102373 receive_seq=102373 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992852 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=835391 sysload=0.15 cputime=167.686 memavail=7291736 print_time=3391.816 buffer_time=2.359 print_stall=0 extruder: target=240 temp=240.2 pwm=0.381
Stats 798167.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5345543 bytes_read=1196331 bytes_retransmit=9 bytes_invalid=0 send_seq=102446 receive_seq=102446 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992848 heater_bed: target=80 temp=80.1 pwm=0.381 sd_pos=837975 sysload=0.15 cputime=167.768 memavail=7291736 print_time=3392.627 buffer_time=2.169 print_stall=0 extruder: target=240 temp=240.0 pwm=0.454
Stats 798168.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5349995 bytes_read=1197019 bytes_retransmit=9 bytes_invalid=0 send_seq=102528 receive_seq=102528 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1099 freq=119992839 heater_bed: target=80 temp=80.1 pwm=0.381 sd_pos=841528 sysload=0.15 cputime=167.870 memavail=7290984 print_time=3393.865 buffer_time=2.406 print_stall=0 extruder: target=240 temp=239.8 pwm=0.551
Stats 798169.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5354005 bytes_read=1197676 bytes_retransmit=9 bytes_invalid=0 send_seq=102598 receive_seq=102598 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992835 heater_bed: target=80 temp=80.1 pwm=0.381 sd_pos=842690 sysload=0.15 cputime=167.963 memavail=7290984 print_time=3394.544 buffer_time=2.085 print_stall=0 extruder: target=240 temp=239.9 pwm=0.450
Stats 798170.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5358765 bytes_read=1198384 bytes_retransmit=9 bytes_invalid=0 send_seq=102684 receive_seq=102684 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=3 freq=119992830 heater_bed: target=80 temp=80.1 pwm=0.381 sd_pos=843894 sysload=0.30 cputime=168.060 memavail=7290984 print_time=3395.793 buffer_time=2.333 print_stall=0 extruder: target=240 temp=239.8 pwm=0.547
Stats 798171.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5362065 bytes_read=1198962 bytes_retransmit=9 bytes_invalid=0 send_seq=102744 receive_seq=102744 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=80.2 pwm=0.350 sd_pos=844775 sysload=0.30 cputime=168.139 memavail=7290984 print_time=3396.614 buffer_time=2.154 print_stall=0 extruder: target=240 temp=239.9 pwm=0.452
Stats 798172.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5367111 bytes_read=1199755 bytes_retransmit=9 bytes_invalid=0 send_seq=102838 receive_seq=102838 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=1349 freq=119992874 heater_bed: target=80 temp=80.1 pwm=0.505 sd_pos=846702 sysload=0.30 cputime=168.248 memavail=7283772 print_time=3398.232 buffer_time=2.772 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 798173.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5371028 bytes_read=1200383 bytes_retransmit=9 bytes_invalid=0 send_seq=102908 receive_seq=102908 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1006 freq=119992859 heater_bed: target=80 temp=80.1 pwm=0.421 sd_pos=847340 sysload=0.30 cputime=168.315 memavail=7290224 print_time=3399.020 buffer_time=2.559 print_stall=0 extruder: target=240 temp=239.7 pwm=0.586
Stats 798174.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5374515 bytes_read=1200981 bytes_retransmit=9 bytes_invalid=0 send_seq=102972 receive_seq=102972 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=500 freq=119992847 heater_bed: target=80 temp=80.1 pwm=0.523 sd_pos=847889 sysload=0.30 cputime=168.368 memavail=7290224 print_time=3399.710 buffer_time=2.248 print_stall=0 extruder: target=240 temp=239.9 pwm=0.486
Stats 798175.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5379057 bytes_read=1201678 bytes_retransmit=9 bytes_invalid=0 send_seq=103050 receive_seq=103050 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=323 freq=119992840 heater_bed: target=80 temp=80.1 pwm=0.449 sd_pos=848661 sysload=0.27 cputime=168.421 memavail=7290224 print_time=3400.578 buffer_time=2.115 print_stall=0 extruder: target=240 temp=240.0 pwm=0.430
Stats 798176.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5383568 bytes_read=1202361 bytes_retransmit=9 bytes_invalid=0 send_seq=103128 receive_seq=103128 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=3105 freq=119992834 heater_bed: target=80 temp=80.1 pwm=0.500 sd_pos=850171 sysload=0.27 cputime=168.498 memavail=7290224 print_time=3402.270 buffer_time=2.807 print_stall=0 extruder: target=240 temp=239.8 pwm=0.502
Stats 798177.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5388379 bytes_read=1203052 bytes_retransmit=9 bytes_invalid=0 send_seq=103212 receive_seq=103212 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=1566 freq=119992869 heater_bed: target=80 temp=80.1 pwm=0.410 sd_pos=850587 sysload=0.27 cputime=168.572 memavail=7290224 print_time=3402.979 buffer_time=2.515 print_stall=0 extruder: target=240 temp=239.9 pwm=0.451
Stats 798178.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5392961 bytes_read=1203760 bytes_retransmit=9 bytes_invalid=0 send_seq=103294 receive_seq=103294 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=949 freq=119992859 heater_bed: target=80 temp=80.1 pwm=0.479 sd_pos=851136 sysload=0.27 cputime=168.667 memavail=7289720 print_time=3403.795 buffer_time=2.331 print_stall=0 extruder: target=240 temp=240.0 pwm=0.427
Stats 798179.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5397453 bytes_read=1204437 bytes_retransmit=9 bytes_invalid=0 send_seq=103374 receive_seq=103374 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=650 freq=119992850 heater_bed: target=80 temp=80.1 pwm=0.479 sd_pos=852006 sysload=0.27 cputime=168.757 memavail=7289720 print_time=3404.576 buffer_time=2.111 print_stall=0 extruder: target=240 temp=240.1 pwm=0.427
Stats 798180.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5402099 bytes_read=1205115 bytes_retransmit=9 bytes_invalid=0 send_seq=103454 receive_seq=103454 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3692 freq=119992846 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=853549 sysload=0.25 cputime=168.870 memavail=7289720 print_time=3406.146 buffer_time=2.678 print_stall=0 extruder: target=240 temp=239.8 pwm=0.616
Stats 798181.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5406972 bytes_read=1205842 bytes_retransmit=9 bytes_invalid=0 send_seq=103538 receive_seq=103538 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=2193 freq=119992875 heater_bed: target=80 temp=80.0 pwm=0.632 sd_pos=854735 sysload=0.25 cputime=168.970 memavail=7289720 print_time=3406.883 buffer_time=2.414 print_stall=0 extruder: target=240 temp=239.9 pwm=0.503
Stats 798182.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5411957 bytes_read=1206566 bytes_retransmit=9 bytes_invalid=0 send_seq=103624 receive_seq=103624 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1003 freq=119992862 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=855362 sysload=0.25 cputime=169.064 memavail=7289720 print_time=3407.682 buffer_time=2.213 print_stall=0 extruder: target=240 temp=239.8 pwm=0.539
Stats 798183.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5414614 bytes_read=1207094 bytes_retransmit=9 bytes_invalid=0 send_seq=103674 receive_seq=103674 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=855495 sysload=0.25 cputime=169.136 memavail=7289720 print_time=3408.696 buffer_time=2.226 print_stall=0 extruder: target=240 temp=240.0 pwm=0.411
Stats 798184.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5415893 bytes_read=1207561 bytes_retransmit=9 bytes_invalid=0 send_seq=103706 receive_seq=103706 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=855646 sysload=0.25 cputime=169.194 memavail=7289720 print_time=3409.622 buffer_time=2.151 print_stall=0 extruder: target=240 temp=240.2 pwm=0.373
Stats 798185.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5416725 bytes_read=1207959 bytes_retransmit=9 bytes_invalid=0 send_seq=103730 receive_seq=103730 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=79.9 pwm=0.536 sd_pos=855703 sysload=0.23 cputime=169.246 memavail=7289488 print_time=3410.512 buffer_time=2.040 print_stall=0 extruder: target=240 temp=239.9 pwm=0.510
Stats 798186.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5418451 bytes_read=1208417 bytes_retransmit=9 bytes_invalid=0 send_seq=103766 receive_seq=103766 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=855893 sysload=0.23 cputime=169.309 memavail=7289264 print_time=3411.956 buffer_time=2.484 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 798187.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5422001 bytes_read=1209090 bytes_retransmit=9 bytes_invalid=0 send_seq=103836 receive_seq=103836 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992816 heater_bed: target=80 temp=80.0 pwm=0.299 sd_pos=856490 sysload=0.23 cputime=169.379 memavail=7289264 print_time=3412.740 buffer_time=2.266 print_stall=0 extruder: target=240 temp=240.1 pwm=0.451
Stats 798188.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5427136 bytes_read=1209843 bytes_retransmit=9 bytes_invalid=0 send_seq=103931 receive_seq=103931 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1199 freq=119992812 heater_bed: target=80 temp=80.0 pwm=0.497 sd_pos=858041 sysload=0.23 cputime=169.460 memavail=7290020 print_time=3413.904 buffer_time=2.429 print_stall=0 extruder: target=240 temp=239.8 pwm=0.512
Stats 798189.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5430011 bytes_read=1210381 bytes_retransmit=9 bytes_invalid=0 send_seq=103983 receive_seq=103983 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=1738 freq=119992805 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=858875 sysload=0.23 cputime=169.540 memavail=7290020 print_time=3414.517 buffer_time=2.042 print_stall=0 extruder: target=240 temp=239.9 pwm=0.451
Stats 798190.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5435649 bytes_read=1211168 bytes_retransmit=9 bytes_invalid=0 send_seq=104079 receive_seq=104079 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=2480 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=860427 sysload=0.45 cputime=169.652 memavail=7290020 print_time=3415.686 buffer_time=2.211 print_stall=0 extruder: target=240 temp=239.8 pwm=0.549
Stats 798191.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5441246 bytes_read=1211931 bytes_retransmit=9 bytes_invalid=0 send_seq=104176 receive_seq=104176 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=3026 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.433 sd_pos=862006 sysload=0.45 cputime=169.761 memavail=7290020 print_time=3417.002 buffer_time=2.526 print_stall=0 extruder: target=240 temp=240.1 pwm=0.387
Stats 798192.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5446068 bytes_read=1212640 bytes_retransmit=9 bytes_invalid=0 send_seq=104259 receive_seq=104259 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=80.0 pwm=0.433 sd_pos=862120 sysload=0.45 cputime=169.842 memavail=7290020 print_time=3417.488 buffer_time=2.012 print_stall=0 extruder: target=240 temp=239.8 pwm=0.555
Stats 798193.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5448574 bytes_read=1213202 bytes_retransmit=9 bytes_invalid=0 send_seq=104310 receive_seq=104310 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=862528 sysload=0.45 cputime=169.897 memavail=7290020 print_time=3418.736 buffer_time=2.259 print_stall=0 extruder: target=240 temp=240.0 pwm=0.454
Stats 798194.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5452252 bytes_read=1213825 bytes_retransmit=9 bytes_invalid=0 send_seq=104379 receive_seq=104379 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=80 temp=80.0 pwm=0.516 sd_pos=863478 sysload=0.45 cputime=169.968 memavail=7290020 print_time=3419.549 buffer_time=2.071 print_stall=0 extruder: target=240 temp=240.1 pwm=0.454
Stats 798195.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5456619 bytes_read=1214534 bytes_retransmit=9 bytes_invalid=0 send_seq=104460 receive_seq=104460 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=864722 sysload=0.42 cputime=170.048 memavail=7290020 print_time=3420.624 buffer_time=2.146 print_stall=0 extruder: target=240 temp=240.1 pwm=0.454
Stats 798196.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5457822 bytes_read=1214976 bytes_retransmit=9 bytes_invalid=0 send_seq=104490 receive_seq=104490 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992801 heater_bed: target=80 temp=80.0 pwm=0.340 sd_pos=864780 sysload=0.42 cputime=170.098 memavail=7290020 print_time=3421.528 buffer_time=2.049 print_stall=0 extruder: target=240 temp=240.2 pwm=0.395
Stats 798197.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5461661 bytes_read=1215640 bytes_retransmit=9 bytes_invalid=0 send_seq=104564 receive_seq=104564 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.383 sd_pos=866383 sysload=0.42 cputime=170.176 memavail=7289796 print_time=3422.896 buffer_time=2.416 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 798198.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5465381 bytes_read=1216273 bytes_retransmit=9 bytes_invalid=0 send_seq=104632 receive_seq=104632 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.1 pwm=0.352 sd_pos=868321 sysload=0.42 cputime=170.264 memavail=7289072 print_time=3423.732 buffer_time=2.251 print_stall=0 extruder: target=240 temp=240.1 pwm=0.495
Stats 798199.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5468870 bytes_read=1216900 bytes_retransmit=9 bytes_invalid=0 send_seq=104699 receive_seq=104699 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=869734 sysload=0.42 cputime=170.342 memavail=7289072 print_time=3424.580 buffer_time=2.099 print_stall=0 extruder: target=240 temp=240.0 pwm=0.519
Stats 798200.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5473595 bytes_read=1217608 bytes_retransmit=9 bytes_invalid=0 send_seq=104785 receive_seq=104785 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=80.1 pwm=0.431 sd_pos=870979 sysload=0.38 cputime=170.430 memavail=7289072 print_time=3425.823 buffer_time=2.341 print_stall=0 extruder: target=240 temp=240.0 pwm=0.477
Stats 798201.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5476855 bytes_read=1218206 bytes_retransmit=9 bytes_invalid=0 send_seq=104846 receive_seq=104846 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.498 sd_pos=871638 sysload=0.38 cputime=170.512 memavail=7289072 print_time=3426.697 buffer_time=2.214 print_stall=0 extruder: target=240 temp=240.1 pwm=0.403
Stats 798202.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5481604 bytes_read=1218949 bytes_retransmit=9 bytes_invalid=0 send_seq=104933 receive_seq=104933 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=161 freq=119992806 heater_bed: target=80 temp=80.0 pwm=0.498 sd_pos=873207 sysload=0.38 cputime=170.607 memavail=7289072 print_time=3428.087 buffer_time=2.603 print_stall=0 extruder: target=240 temp=239.8 pwm=0.532
Stats 798203.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5485275 bytes_read=1219567 bytes_retransmit=9 bytes_invalid=0 send_seq=105001 receive_seq=105001 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.446 sd_pos=874371 sysload=0.38 cputime=170.690 memavail=7289072 print_time=3428.942 buffer_time=2.458 print_stall=0 extruder: target=240 temp=240.3 pwm=0.324
Stats 798204.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5488741 bytes_read=1220165 bytes_retransmit=9 bytes_invalid=0 send_seq=105062 receive_seq=105062 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.549 sd_pos=875064 sysload=0.38 cputime=170.763 memavail=7289072 print_time=3429.672 buffer_time=2.187 print_stall=0 extruder: target=240 temp=240.3 pwm=0.360
Stats 798205.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5492825 bytes_read=1220827 bytes_retransmit=9 bytes_invalid=0 send_seq=105136 receive_seq=105136 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1928 freq=119992789 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=875884 sysload=0.43 cputime=170.847 memavail=7289072 print_time=3431.224 buffer_time=2.739 print_stall=0 extruder: target=240 temp=239.9 pwm=0.558
Stats 798206.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5497301 bytes_read=1221500 bytes_retransmit=9 bytes_invalid=0 send_seq=105215 receive_seq=105215 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=1085 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=876670 sysload=0.43 cputime=170.937 memavail=7289072 print_time=3432.058 buffer_time=2.573 print_stall=0 extruder: target=240 temp=239.9 pwm=0.536
Stats 798207.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5501212 bytes_read=1222159 bytes_retransmit=9 bytes_invalid=0 send_seq=105285 receive_seq=105285 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=512 freq=119992820 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=877145 sysload=0.43 cputime=171.016 memavail=7289076 print_time=3432.779 buffer_time=2.293 print_stall=0 extruder: target=240 temp=240.0 pwm=0.451
Stats 798208.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5505471 bytes_read=1222826 bytes_retransmit=9 bytes_invalid=0 send_seq=105360 receive_seq=105360 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=548 freq=119992808 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=877937 sysload=0.43 cputime=171.114 memavail=7289076 print_time=3433.715 buffer_time=2.229 print_stall=0 extruder: target=240 temp=239.9 pwm=0.477
Stats 798209.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5509327 bytes_read=1223444 bytes_retransmit=9 bytes_invalid=0 send_seq=105428 receive_seq=105428 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=878273 sysload=0.43 cputime=171.198 memavail=7289076 print_time=3434.520 buffer_time=2.033 print_stall=0 extruder: target=240 temp=240.1 pwm=0.477
Stats 798210.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5514131 bytes_read=1224152 bytes_retransmit=9 bytes_invalid=0 send_seq=105511 receive_seq=105511 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=879044 sysload=0.48 cputime=171.296 memavail=7288852 print_time=3435.531 buffer_time=2.043 print_stall=0 extruder: target=240 temp=240.0 pwm=0.484
Stats 798211.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5518609 bytes_read=1224839 bytes_retransmit=9 bytes_invalid=0 send_seq=105590 receive_seq=105590 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=2888 freq=119992795 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=880008 sysload=0.48 cputime=171.399 memavail=7288852 print_time=3437.170 buffer_time=2.682 print_stall=0 extruder: target=240 temp=240.3 pwm=0.381
Stats 798212.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5523262 bytes_read=1225531 bytes_retransmit=9 bytes_invalid=0 send_seq=105670 receive_seq=105670 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=2207 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.549 sd_pos=880722 sysload=0.48 cputime=171.503 memavail=7288852 print_time=3437.969 buffer_time=2.481 print_stall=0 extruder: target=240 temp=240.3 pwm=0.438
Stats 798213.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5528111 bytes_read=1226231 bytes_retransmit=9 bytes_invalid=0 send_seq=105753 receive_seq=105753 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=428 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=881011 sysload=0.48 cputime=171.607 memavail=7288852 print_time=3438.645 buffer_time=2.156 print_stall=0 extruder: target=240 temp=240.1 pwm=0.487
Stats 798214.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5532565 bytes_read=1226902 bytes_retransmit=9 bytes_invalid=0 send_seq=105830 receive_seq=105830 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1028 freq=119992785 heater_bed: target=80 temp=80.0 pwm=0.507 sd_pos=881916 sysload=0.48 cputime=171.719 memavail=7288852 print_time=3439.925 buffer_time=2.435 print_stall=0 extruder: target=240 temp=239.9 pwm=0.560
Stats 798215.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5534575 bytes_read=1227385 bytes_retransmit=9 bytes_invalid=0 send_seq=105871 receive_seq=105871 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.0 pwm=0.507 sd_pos=881970 sysload=0.52 cputime=171.801 memavail=7288020 print_time=3440.683 buffer_time=2.192 print_stall=0 extruder: target=240 temp=239.8 pwm=0.504
Stats 798216.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5536225 bytes_read=1227858 bytes_retransmit=9 bytes_invalid=0 send_seq=105907 receive_seq=105907 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=79.9 pwm=0.531 sd_pos=882109 sysload=0.52 cputime=171.875 memavail=7288108 print_time=3441.772 buffer_time=2.281 print_stall=0 extruder: target=240 temp=240.1 pwm=0.373
Stats 798217.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5537083 bytes_read=1228286 bytes_retransmit=9 bytes_invalid=0 send_seq=105931 receive_seq=105931 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992801 heater_bed: target=80 temp=79.9 pwm=0.537 sd_pos=882166 sysload=0.52 cputime=171.935 memavail=7288108 print_time=3442.701 buffer_time=2.208 print_stall=0 extruder: target=240 temp=240.3 pwm=0.347
Stats 798218.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5538830 bytes_read=1228749 bytes_retransmit=9 bytes_invalid=0 send_seq=105968 receive_seq=105968 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=79.9 pwm=0.446 sd_pos=882356 sysload=0.52 cputime=172.006 memavail=7288108 print_time=3444.145 buffer_time=2.652 print_stall=0 extruder: target=240 temp=240.3 pwm=0.334
Stats 798219.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5542442 bytes_read=1229392 bytes_retransmit=9 bytes_invalid=0 send_seq=106038 receive_seq=106038 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=79.9 pwm=0.454 sd_pos=882897 sysload=0.52 cputime=172.088 memavail=7288116 print_time=3444.944 buffer_time=2.450 print_stall=0 extruder: target=240 temp=239.9 pwm=0.531
Stats 798220.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5546074 bytes_read=1230034 bytes_retransmit=9 bytes_invalid=0 send_seq=106108 receive_seq=106108 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992824 heater_bed: target=80 temp=79.9 pwm=0.459 sd_pos=883593 sysload=0.48 cputime=172.171 memavail=7288116 print_time=3445.585 buffer_time=2.088 print_stall=0 extruder: target=240 temp=239.9 pwm=0.453
Stats 798221.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5549821 bytes_read=1230657 bytes_retransmit=9 bytes_invalid=0 send_seq=106177 receive_seq=106177 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2950 freq=119992817 heater_bed: target=80 temp=79.9 pwm=0.406 sd_pos=884856 sysload=0.48 cputime=172.267 memavail=7288116 print_time=3446.854 buffer_time=2.356 print_stall=0 extruder: target=240 temp=239.6 pwm=0.594
Stats 798222.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5555213 bytes_read=1231436 bytes_retransmit=9 bytes_invalid=0 send_seq=106271 receive_seq=106271 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=4005 freq=119992806 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=886159 sysload=0.48 cputime=172.381 memavail=7288116 print_time=3448.074 buffer_time=2.572 print_stall=0 extruder: target=240 temp=239.8 pwm=0.509
Stats 798223.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5560800 bytes_read=1232203 bytes_retransmit=9 bytes_invalid=0 send_seq=106366 receive_seq=106366 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=1568 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.348 sd_pos=887028 sysload=0.48 cputime=172.480 memavail=7288116 print_time=3448.616 buffer_time=2.114 print_stall=0 extruder: target=240 temp=240.0 pwm=0.481
Stats 798224.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5565672 bytes_read=1232901 bytes_retransmit=9 bytes_invalid=0 send_seq=106450 receive_seq=106450 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=887279 sysload=0.48 cputime=172.574 memavail=7288116 print_time=3450.050 buffer_time=2.547 print_stall=0 extruder: target=240 temp=240.4 pwm=0.283
Stats 798225.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5567727 bytes_read=1233409 bytes_retransmit=9 bytes_invalid=0 send_seq=106493 receive_seq=106493 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=888095 sysload=0.44 cputime=172.641 memavail=7288116 print_time=3450.714 buffer_time=2.211 print_stall=0 extruder: target=240 temp=240.2 pwm=0.421
Stats 798226.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5572699 bytes_read=1234156 bytes_retransmit=9 bytes_invalid=0 send_seq=106584 receive_seq=106584 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992816 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=889995 sysload=0.44 cputime=172.728 memavail=7288116 print_time=3451.798 buffer_time=2.294 print_stall=0 extruder: target=240 temp=240.2 pwm=0.458
Stats 798227.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5575786 bytes_read=1234750 bytes_retransmit=9 bytes_invalid=0 send_seq=106644 receive_seq=106644 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=890901 sysload=0.44 cputime=172.801 memavail=7288116 print_time=3452.561 buffer_time=2.056 print_stall=0 extruder: target=240 temp=240.0 pwm=0.515
Stats 798228.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5577013 bytes_read=1235183 bytes_retransmit=9 bytes_invalid=0 send_seq=106672 receive_seq=106672 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=891047 sysload=0.44 cputime=172.852 memavail=7288620 print_time=3453.767 buffer_time=2.260 print_stall=0 extruder: target=240 temp=239.5 pwm=0.670
Stats 798229.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5581034 bytes_read=1235865 bytes_retransmit=9 bytes_invalid=0 send_seq=106750 receive_seq=106750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=892624 sysload=0.44 cputime=172.933 memavail=7288620 print_time=3454.859 buffer_time=2.352 print_stall=0 extruder: target=240 temp=239.8 pwm=0.478
Stats 798230.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5584857 bytes_read=1236503 bytes_retransmit=9 bytes_invalid=0 send_seq=106822 receive_seq=106822 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.0 pwm=0.353 sd_pos=894350 sysload=0.40 cputime=173.011 memavail=7288620 print_time=3455.695 buffer_time=2.187 print_stall=0 extruder: target=240 temp=240.0 pwm=0.447
Stats 798231.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5588758 bytes_read=1237161 bytes_retransmit=9 bytes_invalid=0 send_seq=106895 receive_seq=106895 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=599 freq=119992779 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=896005 sysload=0.40 cputime=173.101 memavail=7288620 print_time=3456.822 buffer_time=2.314 print_stall=0 extruder: target=240 temp=240.1 pwm=0.447
Stats 798232.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5592843 bytes_read=1237824 bytes_retransmit=9 bytes_invalid=0 send_seq=106966 receive_seq=106966 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=896746 sysload=0.40 cputime=173.188 memavail=7288620 print_time=3457.765 buffer_time=2.256 print_stall=0 extruder: target=240 temp=239.8 pwm=0.582
Stats 798233.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5597377 bytes_read=1238517 bytes_retransmit=9 bytes_invalid=0 send_seq=107049 receive_seq=107049 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=223 freq=119992772 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=898013 sysload=0.40 cputime=173.271 memavail=7288620 print_time=3459.105 buffer_time=2.596 print_stall=0 extruder: target=240 temp=239.9 pwm=0.561
Stats 798234.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5600757 bytes_read=1239120 bytes_retransmit=9 bytes_invalid=0 send_seq=107111 receive_seq=107111 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.520 sd_pos=898925 sysload=0.40 cputime=173.350 memavail=7288620 print_time=3459.844 buffer_time=2.334 print_stall=0 extruder: target=240 temp=239.8 pwm=0.528
Stats 798235.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5604009 bytes_read=1239712 bytes_retransmit=9 bytes_invalid=0 send_seq=107171 receive_seq=107171 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.552 sd_pos=899426 sysload=0.37 cputime=173.416 memavail=7288620 print_time=3460.563 buffer_time=2.053 print_stall=0 extruder: target=240 temp=239.7 pwm=0.576
Stats 798236.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5608752 bytes_read=1240415 bytes_retransmit=9 bytes_invalid=0 send_seq=107256 receive_seq=107256 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=1904 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=900547 sysload=0.37 cputime=173.504 memavail=7288620 print_time=3462.200 buffer_time=2.689 print_stall=0 extruder: target=240 temp=240.1 pwm=0.375
Stats 798237.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5613220 bytes_read=1241119 bytes_retransmit=9 bytes_invalid=0 send_seq=107335 receive_seq=107335 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=829 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=901371 sysload=0.37 cputime=173.596 memavail=7288620 print_time=3463.047 buffer_time=2.535 print_stall=0 extruder: target=240 temp=240.1 pwm=0.392
Stats 798238.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5617147 bytes_read=1241766 bytes_retransmit=9 bytes_invalid=0 send_seq=107406 receive_seq=107406 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=684 freq=119992827 heater_bed: target=80 temp=80.0 pwm=0.494 sd_pos=902278 sysload=0.37 cputime=173.690 memavail=7288628 print_time=3463.800 buffer_time=2.288 print_stall=0 extruder: target=240 temp=240.2 pwm=0.392
Stats 798239.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5621438 bytes_read=1242424 bytes_retransmit=9 bytes_invalid=0 send_seq=107482 receive_seq=107482 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=222 freq=119992819 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=902904 sysload=0.37 cputime=173.777 memavail=7288628 print_time=3464.581 buffer_time=2.068 print_stall=0 extruder: target=240 temp=240.1 pwm=0.456
Stats 798240.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5626124 bytes_read=1243112 bytes_retransmit=9 bytes_invalid=0 send_seq=107561 receive_seq=107561 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=303 freq=119992816 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=903730 sysload=0.34 cputime=173.869 memavail=7288628 print_time=3465.570 buffer_time=2.056 print_stall=0 extruder: target=240 temp=239.8 pwm=0.615
Stats 798241.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5630889 bytes_read=1243814 bytes_retransmit=9 bytes_invalid=0 send_seq=107643 receive_seq=107643 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=1728 freq=119992808 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=905071 sysload=0.34 cputime=173.976 memavail=7288628 print_time=3466.950 buffer_time=2.436 print_stall=0 extruder: target=240 temp=240.1 pwm=0.397
Stats 798242.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5635614 bytes_read=1244518 bytes_retransmit=9 bytes_invalid=0 send_seq=107725 receive_seq=107725 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=1462 freq=119992801 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=905628 sysload=0.34 cputime=174.075 memavail=7288628 print_time=3467.849 buffer_time=2.333 print_stall=0 extruder: target=240 temp=240.0 pwm=0.505
Stats 798243.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5639934 bytes_read=1245181 bytes_retransmit=9 bytes_invalid=0 send_seq=107799 receive_seq=107799 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=1943 freq=119992797 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=906147 sysload=0.34 cputime=174.174 memavail=7288404 print_time=3469.025 buffer_time=2.509 print_stall=0 extruder: target=240 temp=240.0 pwm=0.479
Stats 798244.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5642975 bytes_read=1245763 bytes_retransmit=9 bytes_invalid=0 send_seq=107857 receive_seq=107857 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=79.9 pwm=0.538 sd_pos=906213 sysload=0.34 cputime=174.244 memavail=7288404 print_time=3469.783 buffer_time=2.265 print_stall=0 extruder: target=240 temp=240.1 pwm=0.423
Stats 798245.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5644626 bytes_read=1246221 bytes_retransmit=9 bytes_invalid=0 send_seq=107893 receive_seq=107893 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=906352 sysload=0.31 cputime=174.302 memavail=7288716 print_time=3470.872 buffer_time=2.355 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 798246.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5645451 bytes_read=1246624 bytes_retransmit=9 bytes_invalid=0 send_seq=107915 receive_seq=107915 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=79.9 pwm=0.542 sd_pos=906409 sysload=0.31 cputime=174.354 memavail=7288876 print_time=3471.801 buffer_time=2.282 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 798247.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5647168 bytes_read=1247112 bytes_retransmit=9 bytes_invalid=0 send_seq=107951 receive_seq=107951 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=79.9 pwm=0.518 sd_pos=906587 sysload=0.31 cputime=174.416 memavail=7289132 print_time=3473.245 buffer_time=2.726 print_stall=0 extruder: target=240 temp=240.0 pwm=0.500
Stats 798248.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5650715 bytes_read=1247731 bytes_retransmit=9 bytes_invalid=0 send_seq=108020 receive_seq=108020 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=79.9 pwm=0.518 sd_pos=907131 sysload=0.31 cputime=174.489 memavail=7289636 print_time=3474.030 buffer_time=2.510 print_stall=0 extruder: target=240 temp=240.0 pwm=0.501
Stats 798249.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5654445 bytes_read=1248376 bytes_retransmit=9 bytes_invalid=0 send_seq=108092 receive_seq=108092 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=80 temp=79.9 pwm=0.486 sd_pos=907854 sysload=0.31 cputime=174.552 memavail=7289636 print_time=3474.708 buffer_time=2.187 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 798250.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5657795 bytes_read=1248963 bytes_retransmit=9 bytes_invalid=0 send_seq=108152 receive_seq=108152 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=3536 freq=119992770 heater_bed: target=80 temp=79.9 pwm=0.486 sd_pos=909301 sysload=0.29 cputime=174.642 memavail=7289640 print_time=3476.063 buffer_time=2.541 print_stall=0 extruder: target=240 temp=239.8 pwm=0.489
Stats 798251.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5662900 bytes_read=1249676 bytes_retransmit=9 bytes_invalid=0 send_seq=108239 receive_seq=108239 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2149 freq=119992766 heater_bed: target=80 temp=79.9 pwm=0.484 sd_pos=910027 sysload=0.29 cputime=174.731 memavail=7289640 print_time=3476.740 buffer_time=2.218 print_stall=0 extruder: target=240 temp=240.1 pwm=0.385
Stats 798252.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5668357 bytes_read=1250445 bytes_retransmit=9 bytes_invalid=0 send_seq=108331 receive_seq=108331 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=2790 freq=119992765 heater_bed: target=80 temp=79.9 pwm=0.444 sd_pos=911503 sysload=0.29 cputime=174.853 memavail=7289640 print_time=3478.099 buffer_time=2.576 print_stall=0 extruder: target=240 temp=240.0 pwm=0.500
Stats 798253.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5673602 bytes_read=1251182 bytes_retransmit=9 bytes_invalid=0 send_seq=108420 receive_seq=108420 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=383 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.382 sd_pos=912192 sysload=0.29 cputime=174.956 memavail=7289640 print_time=3478.693 buffer_time=2.168 print_stall=0 extruder: target=240 temp=240.2 pwm=0.364
Stats 798254.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5676495 bytes_read=1251730 bytes_retransmit=9 bytes_invalid=0 send_seq=108474 receive_seq=108474 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=912644 sysload=0.29 cputime=175.031 memavail=7289640 print_time=3479.632 buffer_time=2.107 print_stall=0 extruder: target=240 temp=240.1 pwm=0.488
Stats 798255.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5681170 bytes_read=1252453 bytes_retransmit=9 bytes_invalid=0 send_seq=108560 receive_seq=108560 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=914500 sysload=0.27 cputime=175.126 memavail=7289640 print_time=3480.844 buffer_time=2.319 print_stall=0 extruder: target=240 temp=239.8 pwm=0.557
Stats 798256.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5684583 bytes_read=1253070 bytes_retransmit=9 bytes_invalid=0 send_seq=108625 receive_seq=108625 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=915450 sysload=0.27 cputime=175.192 memavail=7289640 print_time=3481.593 buffer_time=2.066 print_stall=0 extruder: target=240 temp=239.9 pwm=0.511
Stats 798257.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5688503 bytes_read=1253724 bytes_retransmit=9 bytes_invalid=0 send_seq=108697 receive_seq=108697 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=80.0 pwm=0.511 sd_pos=916461 sysload=0.27 cputime=175.270 memavail=7289416 print_time=3482.949 buffer_time=2.422 print_stall=0 extruder: target=240 temp=240.2 pwm=0.379
Stats 798258.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5689715 bytes_read=1254178 bytes_retransmit=9 bytes_invalid=0 send_seq=108727 receive_seq=108727 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.380 sd_pos=916838 sysload=0.27 cputime=175.337 memavail=7289420 print_time=3483.615 buffer_time=2.088 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 798259.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5693447 bytes_read=1254835 bytes_retransmit=9 bytes_invalid=0 send_seq=108800 receive_seq=108800 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=918179 sysload=0.27 cputime=175.421 memavail=7289196 print_time=3484.686 buffer_time=2.158 print_stall=0 extruder: target=240 temp=240.1 pwm=0.408
Stats 798260.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5698709 bytes_read=1255593 bytes_retransmit=9 bytes_invalid=0 send_seq=108896 receive_seq=108896 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992806 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=920086 sysload=0.24 cputime=175.509 memavail=7289196 print_time=3485.909 buffer_time=2.380 print_stall=0 extruder: target=240 temp=240.2 pwm=0.389
Stats 798261.0: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5701721 bytes_read=1256166 bytes_retransmit=9 bytes_invalid=0 send_seq=108952 receive_seq=108952 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=920742 sysload=0.24 cputime=175.589 memavail=7289196 print_time=3486.729 buffer_time=2.199 print_stall=0 extruder: target=240 temp=240.1 pwm=0.440
Stats 798262.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5706317 bytes_read=1256904 bytes_retransmit=9 bytes_invalid=0 send_seq=109038 receive_seq=109038 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=921969 sysload=0.24 cputime=175.685 memavail=7289196 print_time=3488.079 buffer_time=2.549 print_stall=0 extruder: target=240 temp=240.1 pwm=0.410
Stats 798263.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5709553 bytes_read=1257492 bytes_retransmit=9 bytes_invalid=0 send_seq=109100 receive_seq=109100 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=922511 sysload=0.24 cputime=175.766 memavail=7289196 print_time=3488.867 buffer_time=2.337 print_stall=0 extruder: target=240 temp=239.9 pwm=0.502
Stats 798264.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5713922 bytes_read=1258180 bytes_retransmit=9 bytes_invalid=0 send_seq=109179 receive_seq=109179 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1668 freq=119992783 heater_bed: target=80 temp=79.9 pwm=0.549 sd_pos=923473 sysload=0.24 cputime=175.860 memavail=7289196 print_time=3490.441 buffer_time=2.911 print_stall=0 extruder: target=240 temp=240.0 pwm=0.440
Stats 798265.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5717432 bytes_read=1258792 bytes_retransmit=9 bytes_invalid=0 send_seq=109243 receive_seq=109243 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2087 freq=119992823 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=924582 sysload=0.22 cputime=175.948 memavail=7289196 print_time=3491.247 buffer_time=2.716 print_stall=0 extruder: target=240 temp=240.1 pwm=0.432
Stats 798266.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5721863 bytes_read=1259450 bytes_retransmit=9 bytes_invalid=0 send_seq=109319 receive_seq=109319 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=925 freq=119992815 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=926474 sysload=0.22 cputime=176.047 memavail=7289196 print_time=3491.907 buffer_time=2.375 print_stall=0 extruder: target=240 temp=240.0 pwm=0.432
Stats 798267.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5725744 bytes_read=1260094 bytes_retransmit=9 bytes_invalid=0 send_seq=109386 receive_seq=109386 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1365 freq=119992811 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=927570 sysload=0.22 cputime=176.146 memavail=7289196 print_time=3492.816 buffer_time=2.284 print_stall=0 extruder: target=240 temp=240.3 pwm=0.338
Stats 798268.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5730562 bytes_read=1260806 bytes_retransmit=9 bytes_invalid=0 send_seq=109470 receive_seq=109470 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=4544 freq=119992805 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=929170 sysload=0.22 cputime=176.266 memavail=7288692 print_time=3494.481 buffer_time=2.949 print_stall=0 extruder: target=240 temp=240.1 pwm=0.514
Stats 798269.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5735215 bytes_read=1261484 bytes_retransmit=9 bytes_invalid=0 send_seq=109550 receive_seq=109550 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=3523 freq=119992822 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=930173 sysload=0.22 cputime=176.378 memavail=7288692 print_time=3495.270 buffer_time=2.737 print_stall=0 extruder: target=240 temp=240.0 pwm=0.478
Stats 798270.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5740211 bytes_read=1262202 bytes_retransmit=9 bytes_invalid=0 send_seq=109635 receive_seq=109635 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=2397 freq=119992811 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=930800 sysload=0.37 cputime=176.494 memavail=7288692 print_time=3495.940 buffer_time=2.407 print_stall=0 extruder: target=240 temp=240.1 pwm=0.409
Stats 798271.0: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5745253 bytes_read=1262924 bytes_retransmit=9 bytes_invalid=0 send_seq=109721 receive_seq=109721 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=1529 freq=119992806 heater_bed: target=80 temp=80.0 pwm=0.532 sd_pos=931333 sysload=0.37 cputime=176.604 memavail=7288692 print_time=3496.784 buffer_time=2.249 print_stall=0 extruder: target=240 temp=240.1 pwm=0.405
Stats 798272.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5749966 bytes_read=1263628 bytes_retransmit=9 bytes_invalid=0 send_seq=109803 receive_seq=109803 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=931603 sysload=0.37 cputime=176.718 memavail=7288692 print_time=3497.708 buffer_time=2.172 print_stall=0 extruder: target=240 temp=239.9 pwm=0.530
Stats 798273.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5751821 bytes_read=1264111 bytes_retransmit=9 bytes_invalid=0 send_seq=109841 receive_seq=109841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=931657 sysload=0.37 cputime=176.790 memavail=7288468 print_time=3498.912 buffer_time=2.376 print_stall=0 extruder: target=240 temp=239.9 pwm=0.547
Stats 798274.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5752579 bytes_read=1264518 bytes_retransmit=9 bytes_invalid=0 send_seq=109864 receive_seq=109864 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=79.9 pwm=0.527 sd_pos=931796 sysload=0.37 cputime=176.859 memavail=7288468 print_time=3499.555 buffer_time=2.017 print_stall=0 extruder: target=240 temp=240.1 pwm=0.435
Stats 798275.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5753404 bytes_read=1264906 bytes_retransmit=9 bytes_invalid=0 send_seq=109886 receive_seq=109886 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=79.9 pwm=0.464 sd_pos=931881 sysload=0.34 cputime=176.924 memavail=7291404 print_time=3500.484 buffer_time=1.945 print_stall=0 extruder: target=240 temp=240.1 pwm=0.435
Stats 798276.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5755110 bytes_read=1265379 bytes_retransmit=9 bytes_invalid=0 send_seq=109922 receive_seq=109922 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=79.9 pwm=0.464 sd_pos=932031 sysload=0.34 cputime=176.993 memavail=7291408 print_time=3501.928 buffer_time=2.388 print_stall=0 extruder: target=240 temp=239.9 pwm=0.532
Stats 798277.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=5758573 bytes_read=1266021 bytes_retransmit=9 bytes_invalid=0 send_seq=109989 receive_seq=109989 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=79.9 pwm=0.464 sd_pos=932519 sysload=0.34 cputime=177.066 memavail=7291408 print_time=3502.706 buffer_time=2.165 print_stall=0 extruder: target=240 temp=239.9 pwm=0.547
Stats 798278.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=5763778 bytes_read=1266774 bytes_retransmit=9 bytes_invalid=0 send_seq=110084 receive_seq=110084 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1664 freq=119992797 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=933745 sysload=0.34 cputime=177.152 memavail=7291408 print_time=3504.047 buffer_time=2.505 print_stall=0 extruder: target=240 temp=239.9 pwm=0.553
Stats 798279.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=5767152 bytes_read=1267377 bytes_retransmit=9 bytes_invalid=0 send_seq=110146 receive_seq=110146 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=1829 freq=119992793 heater_bed: target=80 temp=79.9 pwm=0.500 sd_pos=934359 sysload=0.34 cputime=177.238 memavail=7291408 print_time=3504.718 buffer_time=2.174 print_stall=0 extruder: target=240 temp=240.1 pwm=0.462
Stats 798280.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=5772547 bytes_read=1268124 bytes_retransmit=9 bytes_invalid=0 send_seq=110237 receive_seq=110237 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=3090 freq=119992789 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=935613 sysload=0.31 cputime=177.356 memavail=7291408 print_time=3506.079 buffer_time=2.534 print_stall=0 extruder: target=240 temp=239.9 pwm=0.520
Stats 798281.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=5777742 bytes_read=1268847 bytes_retransmit=9 bytes_invalid=0 send_seq=110326 receive_seq=110326 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=642 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=936290 sysload=0.31 cputime=177.450 memavail=7291408 print_time=3506.730 buffer_time=2.185 print_stall=0 extruder: target=240 temp=240.3 pwm=0.324
Stats 798282.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5782512 bytes_read=1269581 bytes_retransmit=9 bytes_invalid=0 send_seq=110411 receive_seq=110411 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.0 pwm=0.381 sd_pos=937145 sysload=0.31 cputime=177.551 memavail=7291408 print_time=3507.904 buffer_time=2.359 print_stall=0 extruder: target=240 temp=240.2 pwm=0.396
Stats 798283.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5786870 bytes_read=1270278 bytes_retransmit=9 bytes_invalid=0 send_seq=110492 receive_seq=110492 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=937952 sysload=0.31 cputime=177.626 memavail=7291408 print_time=3509.122 buffer_time=2.576 print_stall=0 extruder: target=240 temp=240.1 pwm=0.463
Stats 798284.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5789266 bytes_read=1270790 bytes_retransmit=9 bytes_invalid=0 send_seq=110540 receive_seq=110540 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=939193 sysload=0.31 cputime=177.697 memavail=7291408 print_time=3509.647 buffer_time=2.100 print_stall=0 extruder: target=240 temp=240.1 pwm=0.463
Stats 798285.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5794093 bytes_read=1271510 bytes_retransmit=9 bytes_invalid=0 send_seq=110627 receive_seq=110627 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=940746 sysload=0.28 cputime=177.779 memavail=7291184 print_time=3510.877 buffer_time=2.329 print_stall=0 extruder: target=240 temp=240.1 pwm=0.463
Stats 798286.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5796414 bytes_read=1272033 bytes_retransmit=9 bytes_invalid=0 send_seq=110674 receive_seq=110674 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=941146 sysload=0.28 cputime=177.838 memavail=7291184 print_time=3511.728 buffer_time=2.180 print_stall=0 extruder: target=240 temp=240.1 pwm=0.395
Stats 798287.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5799897 bytes_read=1272657 bytes_retransmit=9 bytes_invalid=0 send_seq=110740 receive_seq=110740 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=942036 sysload=0.28 cputime=177.910 memavail=7291184 print_time=3513.073 buffer_time=2.524 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 798288.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5803765 bytes_read=1273315 bytes_retransmit=9 bytes_invalid=0 send_seq=110813 receive_seq=110813 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=943393 sysload=0.28 cputime=177.981 memavail=7291440 print_time=3513.927 buffer_time=2.377 print_stall=0 extruder: target=240 temp=239.9 pwm=0.506
Stats 798289.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5807443 bytes_read=1273952 bytes_retransmit=9 bytes_invalid=0 send_seq=110882 receive_seq=110882 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=944531 sysload=0.28 cputime=178.050 memavail=7291440 print_time=3514.754 buffer_time=2.203 print_stall=0 extruder: target=240 temp=240.0 pwm=0.450
Stats 798290.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5810395 bytes_read=1274500 bytes_retransmit=9 bytes_invalid=0 send_seq=110936 receive_seq=110936 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=945137 sysload=0.26 cputime=178.120 memavail=7291440 print_time=3515.576 buffer_time=2.025 print_stall=0 extruder: target=240 temp=239.9 pwm=0.507
Stats 798291.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5815236 bytes_read=1275228 bytes_retransmit=9 bytes_invalid=0 send_seq=111023 receive_seq=111023 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=946212 sysload=0.26 cputime=178.201 memavail=7291440 print_time=3517.007 buffer_time=2.456 print_stall=0 extruder: target=240 temp=239.8 pwm=0.507
Stats 798292.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=5818581 bytes_read=1275841 bytes_retransmit=9 bytes_invalid=0 send_seq=111084 receive_seq=111084 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=946714 sysload=0.26 cputime=178.267 memavail=7288668 print_time=3517.814 buffer_time=2.261 print_stall=0 extruder: target=240 temp=240.1 pwm=0.413
Stats 798293.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=5822970 bytes_read=1276509 bytes_retransmit=9 bytes_invalid=0 send_seq=111162 receive_seq=111162 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=2305 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=948939 sysload=0.26 cputime=178.333 memavail=7290932 print_time=3519.388 buffer_time=2.835 print_stall=0 extruder: target=240 temp=240.1 pwm=0.484
Stats 798294.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=5826895 bytes_read=1277157 bytes_retransmit=9 bytes_invalid=0 send_seq=111233 receive_seq=111233 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=2152 freq=119992754 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=950136 sysload=0.26 cputime=178.401 memavail=7290932 print_time=3520.218 buffer_time=2.663 print_stall=0 extruder: target=240 temp=240.2 pwm=0.442
Stats 798295.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=5831227 bytes_read=1277829 bytes_retransmit=9 bytes_invalid=0 send_seq=111309 receive_seq=111309 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2044 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=950804 sysload=0.24 cputime=178.461 memavail=7290932 print_time=3521.104 buffer_time=2.549 print_stall=0 extruder: target=240 temp=240.1 pwm=0.479
Stats 798296.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=5836016 bytes_read=1278527 bytes_retransmit=9 bytes_invalid=0 send_seq=111393 receive_seq=111393 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=1246 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=952004 sysload=0.24 cputime=178.523 memavail=7290932 print_time=3521.838 buffer_time=2.282 print_stall=0 extruder: target=240 temp=240.1 pwm=0.436
Stats 798297.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5840357 bytes_read=1279211 bytes_retransmit=9 bytes_invalid=0 send_seq=111468 receive_seq=111468 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=1319 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.507 sd_pos=953601 sysload=0.24 cputime=178.588 memavail=7290932 print_time=3522.838 buffer_time=2.281 print_stall=0 extruder: target=240 temp=240.0 pwm=0.485
Stats 798298.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5845359 bytes_read=1279938 bytes_retransmit=9 bytes_invalid=0 send_seq=111555 receive_seq=111555 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=65 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=954222 sysload=0.24 cputime=178.677 memavail=7290680 print_time=3523.560 buffer_time=2.003 print_stall=0 extruder: target=240 temp=240.2 pwm=0.357
Stats 798299.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5850007 bytes_read=1280621 bytes_retransmit=9 bytes_invalid=0 send_seq=111636 receive_seq=111636 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=3418 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.506 sd_pos=957025 sysload=0.24 cputime=178.794 memavail=7290680 print_time=3525.262 buffer_time=2.704 print_stall=0 extruder: target=240 temp=240.1 pwm=0.390
Stats 798300.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5854859 bytes_read=1281343 bytes_retransmit=9 bytes_invalid=0 send_seq=111720 receive_seq=111719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=1477 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=957323 sysload=0.22 cputime=178.886 memavail=7290680 print_time=3525.860 buffer_time=2.301 print_stall=0 extruder: target=240 temp=240.0 pwm=0.452
Stats 798301.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5859094 bytes_read=1282001 bytes_retransmit=9 bytes_invalid=0 send_seq=111795 receive_seq=111795 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=957518 sysload=0.22 cputime=178.976 memavail=7290680 print_time=3526.624 buffer_time=2.065 print_stall=0 extruder: target=240 temp=240.2 pwm=0.386
Stats 798302.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5862801 bytes_read=1282640 bytes_retransmit=9 bytes_invalid=0 send_seq=111864 receive_seq=111864 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=957739 sysload=0.22 cputime=179.040 memavail=7290680 print_time=3527.853 buffer_time=2.293 print_stall=0 extruder: target=240 temp=240.1 pwm=0.468
Stats 798303.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5864011 bytes_read=1283097 bytes_retransmit=9 bytes_invalid=0 send_seq=111894 receive_seq=111894 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=957793 sysload=0.22 cputime=179.096 memavail=7290680 print_time=3528.757 buffer_time=2.196 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 798304.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5865246 bytes_read=1283525 bytes_retransmit=9 bytes_invalid=0 send_seq=111924 receive_seq=111924 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=957932 sysload=0.22 cputime=179.152 memavail=7290680 print_time=3529.599 buffer_time=2.037 print_stall=0 extruder: target=240 temp=240.0 pwm=0.495
Stats 798305.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5866060 bytes_read=1283908 bytes_retransmit=9 bytes_invalid=0 send_seq=111945 receive_seq=111945 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=958045 sysload=0.20 cputime=179.220 memavail=7290676 print_time=3530.596 buffer_time=2.034 print_stall=0 extruder: target=240 temp=239.8 pwm=0.527
Stats 798306.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5867373 bytes_read=1284370 bytes_retransmit=9 bytes_invalid=0 send_seq=111976 receive_seq=111976 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=958167 sysload=0.20 cputime=179.275 memavail=7290676 print_time=3531.772 buffer_time=2.210 print_stall=0 extruder: target=240 temp=240.0 pwm=0.439
Stats 798307.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5871894 bytes_read=1285028 bytes_retransmit=9 bytes_invalid=0 send_seq=112061 receive_seq=112049 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=2282 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=959266 sysload=0.20 cputime=179.329 memavail=7290676 print_time=3533.255 buffer_time=2.690 print_stall=0 extruder: target=240 temp=240.1 pwm=0.413
Stats 798308.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5876600 bytes_read=1285791 bytes_retransmit=9 bytes_invalid=0 send_seq=112146 receive_seq=112146 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1245 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=959878 sysload=0.20 cputime=179.392 memavail=7290452 print_time=3533.951 buffer_time=2.384 print_stall=0 extruder: target=240 temp=240.0 pwm=0.483
Stats 798309.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5880442 bytes_read=1286443 bytes_retransmit=9 bytes_invalid=0 send_seq=112215 receive_seq=112215 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=908 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=960489 sysload=0.20 cputime=179.463 memavail=7290228 print_time=3534.646 buffer_time=2.079 print_stall=0 extruder: target=240 temp=240.3 pwm=0.376
Stats 798310.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5885548 bytes_read=1287156 bytes_retransmit=9 bytes_invalid=0 send_seq=112302 receive_seq=112302 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=2457 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=961742 sysload=0.19 cputime=179.580 memavail=7290228 print_time=3536.057 buffer_time=2.489 print_stall=0 extruder: target=240 temp=240.1 pwm=0.429
Stats 798311.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=5890599 bytes_read=1287864 bytes_retransmit=9 bytes_invalid=0 send_seq=112388 receive_seq=112388 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=153 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.494 sd_pos=962412 sysload=0.19 cputime=179.682 memavail=7290228 print_time=3536.701 buffer_time=2.133 print_stall=0 extruder: target=240 temp=239.7 pwm=0.639
Stats 798312.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5894896 bytes_read=1288582 bytes_retransmit=9 bytes_invalid=0 send_seq=112467 receive_seq=112467 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=963338 sysload=0.19 cputime=179.772 memavail=7290228 print_time=3537.887 buffer_time=2.318 print_stall=0 extruder: target=240 temp=239.7 pwm=0.597
Stats 798313.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5899459 bytes_read=1289275 bytes_retransmit=9 bytes_invalid=0 send_seq=112550 receive_seq=112550 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=964168 sysload=0.19 cputime=179.840 memavail=7290228 print_time=3539.065 buffer_time=2.495 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 798314.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5903436 bytes_read=1289933 bytes_retransmit=9 bytes_invalid=0 send_seq=112626 receive_seq=112626 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=965687 sysload=0.19 cputime=179.918 memavail=7290228 print_time=3539.882 buffer_time=2.312 print_stall=0 extruder: target=240 temp=240.1 pwm=0.390
Stats 798315.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5906602 bytes_read=1290530 bytes_retransmit=9 bytes_invalid=0 send_seq=112684 receive_seq=112684 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=966432 sysload=0.17 cputime=179.991 memavail=7290228 print_time=3540.654 buffer_time=2.083 print_stall=0 extruder: target=240 temp=240.1 pwm=0.436
Stats 798316.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=5909840 bytes_read=1291123 bytes_retransmit=9 bytes_invalid=0 send_seq=112747 receive_seq=112747 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=967182 sysload=0.17 cputime=180.071 memavail=7290228 print_time=3541.749 buffer_time=2.177 print_stall=0 extruder: target=240 temp=240.3 pwm=0.360
Stats 798317.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5913649 bytes_read=1291772 bytes_retransmit=9 bytes_invalid=0 send_seq=112818 receive_seq=112818 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=968019 sysload=0.17 cputime=180.142 memavail=7290004 print_time=3543.112 buffer_time=2.539 print_stall=0 extruder: target=240 temp=240.0 pwm=0.506
Stats 798318.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5917600 bytes_read=1292444 bytes_retransmit=9 bytes_invalid=0 send_seq=112893 receive_seq=112891 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=969285 sysload=0.17 cputime=180.224 memavail=7289532 print_time=3543.974 buffer_time=2.402 print_stall=0 extruder: target=240 temp=239.7 pwm=0.622
Stats 798319.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5921621 bytes_read=1293118 bytes_retransmit=9 bytes_invalid=0 send_seq=112968 receive_seq=112968 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=331 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=970502 sysload=0.17 cputime=180.313 memavail=7289532 print_time=3545.014 buffer_time=2.440 print_stall=0 extruder: target=240 temp=239.6 pwm=0.541
Stats 798320.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5924253 bytes_read=1293628 bytes_retransmit=9 bytes_invalid=0 send_seq=113016 receive_seq=113016 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=971093 sysload=0.16 cputime=180.387 memavail=7289532 print_time=3545.653 buffer_time=2.078 print_stall=0 extruder: target=240 temp=240.0 pwm=0.387
Stats 798321.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=5929257 bytes_read=1294381 bytes_retransmit=9 bytes_invalid=0 send_seq=113107 receive_seq=113107 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.510 sd_pos=972121 sysload=0.16 cputime=180.487 memavail=7289532 print_time=3547.114 buffer_time=2.538 print_stall=0 extruder: target=240 temp=240.1 pwm=0.366
Stats 798322.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=5932459 bytes_read=1294980 bytes_retransmit=9 bytes_invalid=0 send_seq=113168 receive_seq=113168 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=80.0 pwm=0.511 sd_pos=972635 sysload=0.16 cputime=180.561 memavail=7289532 print_time=3547.897 buffer_time=2.320 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 798323.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=5936847 bytes_read=1295663 bytes_retransmit=9 bytes_invalid=0 send_seq=113249 receive_seq=113249 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1302 freq=119992820 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=973271 sysload=0.16 cputime=180.642 memavail=7289532 print_time=3549.386 buffer_time=2.809 print_stall=0 extruder: target=240 temp=240.0 pwm=0.464
Stats 798324.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=5940596 bytes_read=1296315 bytes_retransmit=9 bytes_invalid=0 send_seq=113318 receive_seq=113318 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=525 freq=119992812 heater_bed: target=80 temp=80.0 pwm=0.514 sd_pos=973657 sysload=0.16 cputime=180.731 memavail=7289532 print_time=3549.921 buffer_time=2.343 print_stall=0 extruder: target=240 temp=239.8 pwm=0.596
Stats 798325.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=5944441 bytes_read=1296938 bytes_retransmit=9 bytes_invalid=0 send_seq=113387 receive_seq=113387 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=972 freq=119992808 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=974297 sysload=0.14 cputime=180.831 memavail=7289532 print_time=3550.847 buffer_time=2.269 print_stall=0 extruder: target=240 temp=240.0 pwm=0.470
Stats 798326.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=5948869 bytes_read=1297611 bytes_retransmit=9 bytes_invalid=0 send_seq=113463 receive_seq=113463 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=17 freq=119992806 heater_bed: target=80 temp=80.0 pwm=0.530 sd_pos=975062 sysload=0.14 cputime=180.939 memavail=7289532 print_time=3551.704 buffer_time=2.126 print_stall=0 extruder: target=240 temp=239.8 pwm=0.582
Stats 798327.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5953816 bytes_read=1298349 bytes_retransmit=9 bytes_invalid=0 send_seq=113549 receive_seq=113549 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=716 freq=119992806 heater_bed: target=80 temp=80.0 pwm=0.530 sd_pos=975749 sysload=0.14 cputime=181.041 memavail=7289532 print_time=3552.793 buffer_time=2.214 print_stall=0 extruder: target=240 temp=239.8 pwm=0.550
Stats 798328.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5957714 bytes_read=1298967 bytes_retransmit=9 bytes_invalid=0 send_seq=113617 receive_seq=113617 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=1066 freq=119992810 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=976329 sysload=0.14 cputime=181.154 memavail=7289536 print_time=3553.738 buffer_time=2.159 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 798329.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5962976 bytes_read=1299710 bytes_retransmit=9 bytes_invalid=0 send_seq=113707 receive_seq=113707 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=2015 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.370 sd_pos=977091 sysload=0.14 cputime=181.269 memavail=7289536 print_time=3554.952 buffer_time=2.373 print_stall=0 extruder: target=240 temp=240.1 pwm=0.484
Stats 798330.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5967589 bytes_read=1300402 bytes_retransmit=9 bytes_invalid=0 send_seq=113787 receive_seq=113787 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=1302 freq=119992795 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=977622 sysload=0.13 cputime=181.382 memavail=7289536 print_time=3555.814 buffer_time=2.234 print_stall=0 extruder: target=240 temp=240.1 pwm=0.496
Stats 798331.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5972060 bytes_read=1301075 bytes_retransmit=9 bytes_invalid=0 send_seq=113866 receive_seq=113866 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=977872 sysload=0.13 cputime=181.483 memavail=7289312 print_time=3556.652 buffer_time=2.070 print_stall=0 extruder: target=240 temp=239.9 pwm=0.568
Stats 798332.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5973716 bytes_read=1301564 bytes_retransmit=9 bytes_invalid=0 send_seq=113902 receive_seq=113902 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=79.9 pwm=0.521 sd_pos=977955 sysload=0.13 cputime=181.555 memavail=7289568 print_time=3558.029 buffer_time=2.447 print_stall=0 extruder: target=240 temp=240.1 pwm=0.483
Stats 798333.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5974926 bytes_read=1301996 bytes_retransmit=9 bytes_invalid=0 send_seq=113930 receive_seq=113930 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=79.9 pwm=0.533 sd_pos=978065 sysload=0.13 cputime=181.615 memavail=7289568 print_time=3558.648 buffer_time=2.065 print_stall=0 extruder: target=240 temp=240.1 pwm=0.483
Stats 798334.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5975785 bytes_read=1302379 bytes_retransmit=9 bytes_invalid=0 send_seq=113951 receive_seq=113951 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=79.9 pwm=0.438 sd_pos=978178 sysload=0.13 cputime=181.682 memavail=7289568 print_time=3559.645 buffer_time=2.061 print_stall=0 extruder: target=240 temp=240.1 pwm=0.432
Stats 798335.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5977030 bytes_read=1302817 bytes_retransmit=9 bytes_invalid=0 send_seq=113980 receive_seq=113980 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=79.9 pwm=0.438 sd_pos=978300 sysload=0.12 cputime=181.757 memavail=7289304 print_time=3560.822 buffer_time=2.236 print_stall=0 extruder: target=240 temp=240.1 pwm=0.478
Stats 798336.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=5983571 bytes_read=1303689 bytes_retransmit=9 bytes_invalid=0 send_seq=114096 receive_seq=114096 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=979399 sysload=0.12 cputime=181.809 memavail=7289304 print_time=3562.220 buffer_time=2.635 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 798337.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5986056 bytes_read=1304223 bytes_retransmit=9 bytes_invalid=0 send_seq=114144 receive_seq=114144 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=998 freq=119992775 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=980013 sysload=0.12 cputime=181.850 memavail=7289304 print_time=3562.914 buffer_time=2.328 print_stall=0 extruder: target=240 temp=240.2 pwm=0.401
Stats 798338.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5990050 bytes_read=1304861 bytes_retransmit=9 bytes_invalid=0 send_seq=114213 receive_seq=114213 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=635 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=980629 sysload=0.12 cputime=181.926 memavail=7289560 print_time=3563.608 buffer_time=2.021 print_stall=0 extruder: target=240 temp=239.9 pwm=0.512
Stats 798339.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5995137 bytes_read=1305598 bytes_retransmit=9 bytes_invalid=0 send_seq=114302 receive_seq=114302 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=38 upcoming_bytes=2378 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=981881 sysload=0.12 cputime=182.005 memavail=7289560 print_time=3565.027 buffer_time=2.439 print_stall=0 extruder: target=240 temp=239.8 pwm=0.551
Stats 798340.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=5999925 bytes_read=1306286 bytes_retransmit=9 bytes_invalid=0 send_seq=114384 receive_seq=114384 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=982471 sysload=0.11 cputime=182.072 memavail=7289560 print_time=3565.616 buffer_time=2.027 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 798341.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6001799 bytes_read=1306774 bytes_retransmit=9 bytes_invalid=0 send_seq=114423 receive_seq=114423 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=982525 sysload=0.11 cputime=182.136 memavail=7289560 print_time=3566.820 buffer_time=2.231 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 798342.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6003102 bytes_read=1307242 bytes_retransmit=9 bytes_invalid=0 send_seq=114455 receive_seq=114455 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.485 sd_pos=982664 sysload=0.11 cputime=182.197 memavail=7289560 print_time=3567.662 buffer_time=2.072 print_stall=0 extruder: target=240 temp=240.1 pwm=0.428
Stats 798343.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6003900 bytes_read=1307630 bytes_retransmit=9 bytes_invalid=0 send_seq=114477 receive_seq=114477 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=982777 sysload=0.11 cputime=182.257 memavail=7289560 print_time=3568.659 buffer_time=2.068 print_stall=0 extruder: target=240 temp=240.1 pwm=0.478
Stats 798344.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6005193 bytes_read=1308078 bytes_retransmit=9 bytes_invalid=0 send_seq=114508 receive_seq=114508 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=982899 sysload=0.11 cputime=182.317 memavail=7289560 print_time=3569.836 buffer_time=2.245 print_stall=0 extruder: target=240 temp=240.1 pwm=0.444
Stats 798345.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6011770 bytes_read=1308950 bytes_retransmit=9 bytes_invalid=0 send_seq=114624 receive_seq=114624 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=984169 sysload=0.18 cputime=182.402 memavail=7289560 print_time=3571.203 buffer_time=2.612 print_stall=0 extruder: target=240 temp=240.1 pwm=0.444
Stats 798346.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6014215 bytes_read=1309478 bytes_retransmit=9 bytes_invalid=0 send_seq=114674 receive_seq=114674 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1124 freq=119992752 heater_bed: target=80 temp=80.1 pwm=0.426 sd_pos=984892 sysload=0.18 cputime=182.466 memavail=7289560 print_time=3571.873 buffer_time=2.281 print_stall=0 extruder: target=240 temp=240.2 pwm=0.402
Stats 798347.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6018080 bytes_read=1310127 bytes_retransmit=9 bytes_invalid=0 send_seq=114742 receive_seq=114742 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=3858 freq=119992752 heater_bed: target=80 temp=80.1 pwm=0.426 sd_pos=986342 sysload=0.18 cputime=182.570 memavail=7289336 print_time=3573.213 buffer_time=2.620 print_stall=0 extruder: target=240 temp=240.2 pwm=0.402
Stats 798348.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6023478 bytes_read=1310884 bytes_retransmit=9 bytes_invalid=0 send_seq=114835 receive_seq=114835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2337 freq=119992747 heater_bed: target=80 temp=80.1 pwm=0.437 sd_pos=987094 sysload=0.18 cputime=182.641 memavail=7289232 print_time=3573.914 buffer_time=2.321 print_stall=0 extruder: target=240 temp=240.1 pwm=0.453
Stats 798349.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6028725 bytes_read=1311607 bytes_retransmit=9 bytes_invalid=0 send_seq=114924 receive_seq=114924 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=254 freq=119992801 heater_bed: target=80 temp=80.1 pwm=0.437 sd_pos=987402 sysload=0.18 cputime=182.706 memavail=7289344 print_time=3574.755 buffer_time=2.161 print_stall=0 extruder: target=240 temp=240.1 pwm=0.462
Stats 798350.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6030863 bytes_read=1312110 bytes_retransmit=9 bytes_invalid=0 send_seq=114966 receive_seq=114966 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.1 pwm=0.437 sd_pos=987880 sysload=0.17 cputime=182.750 memavail=7289344 print_time=3575.744 buffer_time=2.149 print_stall=0 extruder: target=240 temp=240.0 pwm=0.467
Stats 798351.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6033808 bytes_read=1312682 bytes_retransmit=9 bytes_invalid=0 send_seq=115022 receive_seq=115022 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.1 pwm=0.437 sd_pos=988430 sysload=0.17 cputime=182.789 memavail=7289344 print_time=3577.074 buffer_time=2.479 print_stall=0 extruder: target=240 temp=240.1 pwm=0.467
Stats 798352.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6036626 bytes_read=1313251 bytes_retransmit=9 bytes_invalid=0 send_seq=115077 receive_seq=115077 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.509 sd_pos=988912 sysload=0.17 cputime=182.827 memavail=7289344 print_time=3577.862 buffer_time=2.266 print_stall=0 extruder: target=240 temp=240.2 pwm=0.448
Stats 798353.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6041761 bytes_read=1314014 bytes_retransmit=9 bytes_invalid=0 send_seq=115171 receive_seq=115171 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=80.1 pwm=0.401 sd_pos=989678 sysload=0.17 cputime=182.886 memavail=7289344 print_time=3579.122 buffer_time=2.526 print_stall=0 extruder: target=240 temp=240.2 pwm=0.436
Stats 798354.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6044505 bytes_read=1314576 bytes_retransmit=9 bytes_invalid=0 send_seq=115225 receive_seq=115225 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=80.1 pwm=0.474 sd_pos=989957 sysload=0.17 cputime=182.949 memavail=7289344 print_time=3579.831 buffer_time=2.235 print_stall=0 extruder: target=240 temp=240.2 pwm=0.471
Stats 798355.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6047650 bytes_read=1315162 bytes_retransmit=9 bytes_invalid=0 send_seq=115287 receive_seq=115287 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992808 heater_bed: target=80 temp=80.1 pwm=0.434 sd_pos=990553 sysload=0.15 cputime=183.016 memavail=7289344 print_time=3580.954 buffer_time=2.357 print_stall=0 extruder: target=240 temp=240.1 pwm=0.515
Stats 798356.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6049760 bytes_read=1315657 bytes_retransmit=9 bytes_invalid=0 send_seq=115329 receive_seq=115329 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=80 temp=80.1 pwm=0.434 sd_pos=990941 sysload=0.15 cputime=183.071 memavail=7289344 print_time=3581.604 buffer_time=2.006 print_stall=0 extruder: target=240 temp=240.0 pwm=0.515
Stats 798357.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6055100 bytes_read=1316433 bytes_retransmit=9 bytes_invalid=0 send_seq=115424 receive_seq=115424 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=80.1 pwm=0.434 sd_pos=992258 sysload=0.15 cputime=183.154 memavail=7289344 print_time=3583.362 buffer_time=2.764 print_stall=0 extruder: target=240 temp=239.9 pwm=0.435
Stats 798358.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6058493 bytes_read=1317031 bytes_retransmit=9 bytes_invalid=0 send_seq=115488 receive_seq=115488 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=80.1 pwm=0.509 sd_pos=993062 sysload=0.15 cputime=183.220 memavail=7289852 print_time=3584.141 buffer_time=2.543 print_stall=0 extruder: target=240 temp=240.1 pwm=0.373
Stats 798359.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6062043 bytes_read=1317664 bytes_retransmit=9 bytes_invalid=0 send_seq=115556 receive_seq=115556 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=96 freq=119992817 heater_bed: target=80 temp=80.1 pwm=0.443 sd_pos=993486 sysload=0.15 cputime=183.294 memavail=7289852 print_time=3584.918 buffer_time=2.319 print_stall=0 extruder: target=240 temp=240.2 pwm=0.353
Stats 798360.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6065396 bytes_read=1318266 bytes_retransmit=9 bytes_invalid=0 send_seq=115618 receive_seq=115618 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=80.0 pwm=0.561 sd_pos=994337 sysload=0.30 cputime=183.359 memavail=7289852 print_time=3585.972 buffer_time=2.371 print_stall=0 extruder: target=240 temp=239.9 pwm=0.549
Stats 798361.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6069028 bytes_read=1318894 bytes_retransmit=9 bytes_invalid=0 send_seq=115688 receive_seq=115688 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.567 sd_pos=995041 sysload=0.30 cputime=183.431 memavail=7289852 print_time=3586.962 buffer_time=2.361 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 798362.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6072434 bytes_read=1319523 bytes_retransmit=9 bytes_invalid=0 send_seq=115752 receive_seq=115752 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=996095 sysload=0.30 cputime=183.493 memavail=7289852 print_time=3588.027 buffer_time=2.425 print_stall=0 extruder: target=240 temp=239.8 pwm=0.524
Stats 798363.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6075305 bytes_read=1320090 bytes_retransmit=9 bytes_invalid=0 send_seq=115807 receive_seq=115807 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.556 sd_pos=996578 sysload=0.30 cputime=183.561 memavail=7289628 print_time=3588.815 buffer_time=2.213 print_stall=0 extruder: target=240 temp=239.9 pwm=0.503
Stats 798364.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6080488 bytes_read=1320843 bytes_retransmit=9 bytes_invalid=0 send_seq=115902 receive_seq=115902 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1068 freq=119992793 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=997681 sysload=0.30 cputime=183.641 memavail=7290116 print_time=3590.262 buffer_time=2.655 print_stall=0 extruder: target=240 temp=239.9 pwm=0.477
Stats 798365.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6082949 bytes_read=1321376 bytes_retransmit=9 bytes_invalid=0 send_seq=115950 receive_seq=115950 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=79.9 pwm=0.572 sd_pos=997938 sysload=0.28 cputime=183.707 memavail=7290108 print_time=3590.627 buffer_time=2.020 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 798366.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6085238 bytes_read=1321893 bytes_retransmit=9 bytes_invalid=0 send_seq=115995 receive_seq=115995 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=79.9 pwm=0.511 sd_pos=998250 sysload=0.28 cputime=183.766 memavail=7290108 print_time=3591.619 buffer_time=2.011 print_stall=0 extruder: target=240 temp=240.0 pwm=0.457
Stats 798367.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6088795 bytes_read=1322517 bytes_retransmit=9 bytes_invalid=0 send_seq=116061 receive_seq=116061 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=79.9 pwm=0.425 sd_pos=999028 sysload=0.28 cputime=183.831 memavail=7290108 print_time=3593.023 buffer_time=2.414 print_stall=0 extruder: target=240 temp=239.9 pwm=0.457
Stats 798368.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6091775 bytes_read=1323100 bytes_retransmit=9 bytes_invalid=0 send_seq=116119 receive_seq=116119 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=999738 sysload=0.28 cputime=183.897 memavail=7289368 print_time=3593.749 buffer_time=2.139 print_stall=0 extruder: target=240 temp=240.0 pwm=0.436
Stats 798369.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6096177 bytes_read=1323797 bytes_retransmit=9 bytes_invalid=0 send_seq=116200 receive_seq=116200 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=1000382 sysload=0.28 cputime=183.967 memavail=7289368 print_time=3594.616 buffer_time=2.005 print_stall=0 extruder: target=240 temp=240.2 pwm=0.363
Stats 798370.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6099795 bytes_read=1324410 bytes_retransmit=9 bytes_invalid=0 send_seq=116267 receive_seq=116267 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.337 sd_pos=1001064 sysload=0.26 cputime=184.038 memavail=7289368 print_time=3595.945 buffer_time=2.334 print_stall=0 extruder: target=240 temp=240.1 pwm=0.380
Stats 798371.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6100972 bytes_read=1324843 bytes_retransmit=9 bytes_invalid=0 send_seq=116295 receive_seq=116295 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=1001119 sysload=0.26 cputime=184.089 memavail=7289368 print_time=3596.849 buffer_time=2.237 print_stall=0 extruder: target=240 temp=239.7 pwm=0.578
Stats 798372.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6102340 bytes_read=1325306 bytes_retransmit=9 bytes_invalid=0 send_seq=116326 receive_seq=116326 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=1001286 sysload=0.26 cputime=184.147 memavail=7289368 print_time=3598.198 buffer_time=2.585 print_stall=0 extruder: target=240 temp=239.9 pwm=0.484
Stats 798373.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6103432 bytes_read=1325719 bytes_retransmit=9 bytes_invalid=0 send_seq=116353 receive_seq=116353 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=1001342 sysload=0.26 cputime=184.202 memavail=7289368 print_time=3598.788 buffer_time=2.174 print_stall=0 extruder: target=240 temp=240.1 pwm=0.345
Stats 798374.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6104290 bytes_read=1326132 bytes_retransmit=9 bytes_invalid=0 send_seq=116377 receive_seq=116377 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.1 pwm=0.327 sd_pos=1001464 sysload=0.26 cputime=184.253 memavail=7289368 print_time=3599.642 buffer_time=2.027 print_stall=0 extruder: target=240 temp=240.1 pwm=0.385
Stats 798375.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6110994 bytes_read=1327019 bytes_retransmit=9 bytes_invalid=0 send_seq=116496 receive_seq=116496 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.1 pwm=0.327 sd_pos=1002732 sysload=0.23 cputime=184.334 memavail=7289368 print_time=3601.031 buffer_time=2.414 print_stall=0 extruder: target=240 temp=240.1 pwm=0.422
Stats 798376.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6113555 bytes_read=1327547 bytes_retransmit=9 bytes_invalid=0 send_seq=116546 receive_seq=116546 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=988 freq=119992770 heater_bed: target=80 temp=80.1 pwm=0.445 sd_pos=1003458 sysload=0.23 cputime=184.400 memavail=7289368 print_time=3601.712 buffer_time=2.095 print_stall=0 extruder: target=240 temp=239.9 pwm=0.512
Stats 798377.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6118441 bytes_read=1328271 bytes_retransmit=9 bytes_invalid=0 send_seq=116629 receive_seq=116629 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=3164 freq=119992765 heater_bed: target=80 temp=80.1 pwm=0.420 sd_pos=1004909 sysload=0.23 cputime=184.512 memavail=7288920 print_time=3603.074 buffer_time=2.456 print_stall=0 extruder: target=240 temp=240.0 pwm=0.409
Stats 798378.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6123657 bytes_read=1329013 bytes_retransmit=9 bytes_invalid=0 send_seq=116719 receive_seq=116719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1728 freq=119992760 heater_bed: target=80 temp=80.2 pwm=0.369 sd_pos=1005633 sysload=0.23 cputime=184.616 memavail=7288668 print_time=3603.755 buffer_time=2.136 print_stall=0 extruder: target=240 temp=240.0 pwm=0.435
Stats 798379.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6129062 bytes_read=1329756 bytes_retransmit=9 bytes_invalid=0 send_seq=116812 receive_seq=116812 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=479 freq=119992761 heater_bed: target=80 temp=80.2 pwm=0.309 sd_pos=1006095 sysload=0.23 cputime=184.723 memavail=7288444 print_time=3605.182 buffer_time=2.562 print_stall=0 extruder: target=240 temp=239.8 pwm=0.453
Stats 798380.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6131447 bytes_read=1330300 bytes_retransmit=9 bytes_invalid=0 send_seq=116860 receive_seq=116860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.2 pwm=0.389 sd_pos=1006581 sysload=0.22 cputime=184.786 memavail=7288444 print_time=3605.776 buffer_time=2.155 print_stall=0 extruder: target=240 temp=239.8 pwm=0.453
Stats 798381.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6134233 bytes_read=1330862 bytes_retransmit=9 bytes_invalid=0 send_seq=116914 receive_seq=116914 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.2 pwm=0.441 sd_pos=1007079 sysload=0.22 cputime=184.859 memavail=7288604 print_time=3607.083 buffer_time=2.461 print_stall=0 extruder: target=240 temp=240.0 pwm=0.391
Stats 798382.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6137162 bytes_read=1331441 bytes_retransmit=9 bytes_invalid=0 send_seq=116971 receive_seq=116971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.2 pwm=0.441 sd_pos=1007591 sysload=0.22 cputime=184.934 memavail=7288700 print_time=3607.916 buffer_time=2.294 print_stall=0 extruder: target=240 temp=240.1 pwm=0.405
Stats 798383.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6140751 bytes_read=1332079 bytes_retransmit=9 bytes_invalid=0 send_seq=117040 receive_seq=117040 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992806 heater_bed: target=80 temp=80.1 pwm=0.449 sd_pos=1008063 sysload=0.22 cputime=185.011 memavail=7288700 print_time=3608.697 buffer_time=2.074 print_stall=0 extruder: target=240 temp=240.1 pwm=0.416
Stats 798384.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6144876 bytes_read=1332761 bytes_retransmit=9 bytes_invalid=0 send_seq=117118 receive_seq=117118 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.1 pwm=0.449 sd_pos=1008727 sysload=0.22 cputime=185.094 memavail=7288700 print_time=3609.817 buffer_time=2.193 print_stall=0 extruder: target=240 temp=240.0 pwm=0.499
Stats 798385.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6148492 bytes_read=1333379 bytes_retransmit=9 bytes_invalid=0 send_seq=117186 receive_seq=117186 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.1 pwm=0.514 sd_pos=1010250 sysload=0.20 cputime=185.175 memavail=7288700 print_time=3610.944 buffer_time=2.320 print_stall=0 extruder: target=240 temp=239.9 pwm=0.522
Stats 798386.1: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6151296 bytes_read=1333942 bytes_retransmit=9 bytes_invalid=0 send_seq=117240 receive_seq=117240 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=80.1 pwm=0.462 sd_pos=1010962 sysload=0.20 cputime=185.265 memavail=7288700 print_time=3612.049 buffer_time=2.424 print_stall=0 extruder: target=240 temp=240.1 pwm=0.461
Stats 798387.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6156825 bytes_read=1334755 bytes_retransmit=9 bytes_invalid=0 send_seq=117342 receive_seq=117341 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=460 freq=119992824 heater_bed: target=80 temp=80.1 pwm=0.375 sd_pos=1012138 sysload=0.20 cputime=185.364 memavail=7288700 print_time=3613.499 buffer_time=2.873 print_stall=0 extruder: target=240 temp=240.2 pwm=0.325
Stats 798388.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6159449 bytes_read=1335303 bytes_retransmit=9 bytes_invalid=0 send_seq=117395 receive_seq=117395 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=80.1 pwm=0.375 sd_pos=1012362 sysload=0.20 cputime=185.440 memavail=7288476 print_time=3614.036 buffer_time=2.409 print_stall=0 extruder: target=240 temp=240.1 pwm=0.367
Stats 798389.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6161871 bytes_read=1335836 bytes_retransmit=9 bytes_invalid=0 send_seq=117443 receive_seq=117443 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=80.1 pwm=0.446 sd_pos=1012865 sysload=0.20 cputime=185.511 memavail=7288476 print_time=3614.764 buffer_time=2.137 print_stall=0 extruder: target=240 temp=240.2 pwm=0.352
Stats 798390.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6165849 bytes_read=1336508 bytes_retransmit=9 bytes_invalid=0 send_seq=117519 receive_seq=117519 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=80.1 pwm=0.524 sd_pos=1013845 sysload=0.18 cputime=185.594 memavail=7288476 print_time=3615.981 buffer_time=2.353 print_stall=0 extruder: target=240 temp=240.1 pwm=0.351
Stats 798391.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6168505 bytes_read=1337047 bytes_retransmit=9 bytes_invalid=0 send_seq=117572 receive_seq=117572 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=80.0 pwm=0.527 sd_pos=1014662 sysload=0.18 cputime=185.672 memavail=7288476 print_time=3616.813 buffer_time=2.184 print_stall=0 extruder: target=240 temp=239.9 pwm=0.486
Stats 798392.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6172853 bytes_read=1337748 bytes_retransmit=9 bytes_invalid=0 send_seq=117652 receive_seq=117652 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=1015583 sysload=0.18 cputime=185.771 memavail=7288476 print_time=3618.064 buffer_time=2.435 print_stall=0 extruder: target=240 temp=239.8 pwm=0.560
Stats 798393.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6176402 bytes_read=1338369 bytes_retransmit=9 bytes_invalid=0 send_seq=117719 receive_seq=117719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=1016142 sysload=0.18 cputime=185.845 memavail=7288476 print_time=3618.764 buffer_time=2.135 print_stall=0 extruder: target=240 temp=240.0 pwm=0.425
Stats 798394.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6179509 bytes_read=1338922 bytes_retransmit=9 bytes_invalid=0 send_seq=117779 receive_seq=117774 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992798 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=1016625 sysload=0.18 cputime=185.932 memavail=7291188 print_time=3619.681 buffer_time=2.043 print_stall=0 extruder: target=240 temp=239.9 pwm=0.464
Stats 798395.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6182830 bytes_read=1339550 bytes_retransmit=9 bytes_invalid=0 send_seq=117841 receive_seq=117841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=1017403 sysload=0.17 cputime=186.004 memavail=7291404 print_time=3620.848 buffer_time=2.210 print_stall=0 extruder: target=240 temp=239.9 pwm=0.467
Stats 798396.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6184909 bytes_read=1340062 bytes_retransmit=9 bytes_invalid=0 send_seq=117885 receive_seq=117885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.525 sd_pos=1017633 sysload=0.17 cputime=186.068 memavail=7291404 print_time=3621.862 buffer_time=2.222 print_stall=0 extruder: target=240 temp=239.9 pwm=0.443
Stats 798397.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6191458 bytes_read=1340941 bytes_retransmit=9 bytes_invalid=0 send_seq=118002 receive_seq=118002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=141 freq=119992793 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=1018878 sysload=0.17 cputime=186.145 memavail=7291404 print_time=3623.409 buffer_time=2.769 print_stall=0 extruder: target=240 temp=239.9 pwm=0.443
Stats 798398.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6193640 bytes_read=1341454 bytes_retransmit=9 bytes_invalid=0 send_seq=118046 receive_seq=118046 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=788 freq=119992789 heater_bed: target=80 temp=80.0 pwm=0.499 sd_pos=1019556 sysload=0.17 cputime=186.207 memavail=7291408 print_time=3624.212 buffer_time=2.571 print_stall=0 extruder: target=240 temp=240.0 pwm=0.443
Stats 798399.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6195435 bytes_read=1341931 bytes_retransmit=9 bytes_invalid=0 send_seq=118083 receive_seq=118083 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=1019610 sysload=0.17 cputime=186.266 memavail=7291408 print_time=3624.969 buffer_time=2.327 print_stall=0 extruder: target=240 temp=240.0 pwm=0.450
Stats 798400.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6197085 bytes_read=1342389 bytes_retransmit=9 bytes_invalid=0 send_seq=118119 receive_seq=118119 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=1019749 sysload=0.15 cputime=186.325 memavail=7291184 print_time=3626.059 buffer_time=2.416 print_stall=0 extruder: target=240 temp=240.2 pwm=0.368
Stats 798401.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6197961 bytes_read=1342807 bytes_retransmit=9 bytes_invalid=0 send_seq=118144 receive_seq=118144 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.0 pwm=0.396 sd_pos=1019806 sysload=0.15 cputime=186.384 memavail=7291184 print_time=3626.988 buffer_time=2.344 print_stall=0 extruder: target=240 temp=240.2 pwm=0.357
Stats 798402.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6199685 bytes_read=1343300 bytes_retransmit=9 bytes_invalid=0 send_seq=118181 receive_seq=118181 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.396 sd_pos=1019984 sysload=0.15 cputime=186.437 memavail=7291184 print_time=3628.432 buffer_time=2.787 print_stall=0 extruder: target=240 temp=239.7 pwm=0.564
Stats 798403.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6203028 bytes_read=1343903 bytes_retransmit=9 bytes_invalid=0 send_seq=118246 receive_seq=118246 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=80.1 pwm=0.401 sd_pos=1020520 sysload=0.15 cputime=186.493 memavail=7291184 print_time=3629.159 buffer_time=2.514 print_stall=0 extruder: target=240 temp=239.8 pwm=0.503
Stats 798404.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6206817 bytes_read=1344556 bytes_retransmit=9 bytes_invalid=0 send_seq=118318 receive_seq=118318 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=80.1 pwm=0.341 sd_pos=1021188 sysload=0.15 cputime=186.562 memavail=7291184 print_time=3629.811 buffer_time=2.165 print_stall=0 extruder: target=240 temp=239.8 pwm=0.503
Stats 798405.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6210059 bytes_read=1345148 bytes_retransmit=9 bytes_invalid=0 send_seq=118378 receive_seq=118378 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=3554 freq=119992819 heater_bed: target=80 temp=80.1 pwm=0.337 sd_pos=1022468 sysload=0.14 cputime=186.653 memavail=7291184 print_time=3631.104 buffer_time=2.458 print_stall=0 extruder: target=240 temp=239.8 pwm=0.503
Stats 798406.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6215412 bytes_read=1345902 bytes_retransmit=9 bytes_invalid=0 send_seq=118470 receive_seq=118470 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=1690 freq=119992815 heater_bed: target=80 temp=80.1 pwm=0.396 sd_pos=1023079 sysload=0.14 cputime=186.745 memavail=7291184 print_time=3631.679 buffer_time=2.032 print_stall=0 extruder: target=240 temp=240.2 pwm=0.341
Stats 798407.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6221037 bytes_read=1346670 bytes_retransmit=9 bytes_invalid=0 send_seq=118565 receive_seq=118565 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=2553 freq=119992811 heater_bed: target=80 temp=80.1 pwm=0.336 sd_pos=1024217 sysload=0.14 cputime=186.863 memavail=7290960 print_time=3632.911 buffer_time=2.263 print_stall=0 extruder: target=240 temp=240.1 pwm=0.448
Stats 798408.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6226554 bytes_read=1347437 bytes_retransmit=9 bytes_invalid=0 send_seq=118660 receive_seq=118660 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=334 freq=119992803 heater_bed: target=80 temp=80.1 pwm=0.401 sd_pos=1024582 sysload=0.14 cputime=186.970 memavail=7290964 print_time=3634.128 buffer_time=2.479 print_stall=0 extruder: target=240 temp=240.0 pwm=0.500
Stats 798409.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6229082 bytes_read=1347955 bytes_retransmit=9 bytes_invalid=0 send_seq=118708 receive_seq=118708 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.2 pwm=0.341 sd_pos=1025096 sysload=0.14 cputime=187.034 memavail=7290964 print_time=3634.833 buffer_time=2.183 print_stall=0 extruder: target=240 temp=240.0 pwm=0.500
Stats 798410.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6231490 bytes_read=1348498 bytes_retransmit=9 bytes_invalid=0 send_seq=118758 receive_seq=118758 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=80.2 pwm=0.344 sd_pos=1025558 sysload=0.13 cputime=187.100 memavail=7290964 print_time=3636.000 buffer_time=2.350 print_stall=0 extruder: target=240 temp=239.9 pwm=0.464
Stats 798411.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6234397 bytes_read=1349080 bytes_retransmit=9 bytes_invalid=0 send_seq=118816 receive_seq=118816 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.1 pwm=0.406 sd_pos=1026061 sysload=0.13 cputime=187.154 memavail=7290964 print_time=3636.797 buffer_time=2.147 print_stall=0 extruder: target=240 temp=239.8 pwm=0.484
Stats 798412.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6239778 bytes_read=1349859 bytes_retransmit=9 bytes_invalid=0 send_seq=118913 receive_seq=118913 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=910 freq=119992801 heater_bed: target=80 temp=80.1 pwm=0.447 sd_pos=1026837 sysload=0.13 cputime=187.223 memavail=7290964 print_time=3638.410 buffer_time=2.759 print_stall=0 extruder: target=240 temp=240.1 pwm=0.424
Stats 798413.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6242085 bytes_read=1350387 bytes_retransmit=9 bytes_invalid=0 send_seq=118960 receive_seq=118960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.1 pwm=0.364 sd_pos=1027283 sysload=0.13 cputime=187.316 memavail=7289400 print_time=3638.769 buffer_time=2.118 print_stall=0 extruder: target=240 temp=240.1 pwm=0.410
Stats 798414.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6245824 bytes_read=1351044 bytes_retransmit=9 bytes_invalid=0 send_seq=119033 receive_seq=119033 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.1 pwm=0.361 sd_pos=1028400 sysload=0.13 cputime=187.377 memavail=7289400 print_time=3639.910 buffer_time=2.258 print_stall=0 extruder: target=240 temp=240.2 pwm=0.437
Stats 798415.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6248869 bytes_read=1351617 bytes_retransmit=9 bytes_invalid=0 send_seq=119092 receive_seq=119092 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.1 pwm=0.410 sd_pos=1029092 sysload=0.12 cputime=187.445 memavail=7289400 print_time=3641.034 buffer_time=2.383 print_stall=0 extruder: target=240 temp=240.1 pwm=0.489
Stats 798416.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6254158 bytes_read=1352385 bytes_retransmit=9 bytes_invalid=0 send_seq=119187 receive_seq=119187 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=552 freq=119992799 heater_bed: target=80 temp=80.1 pwm=0.356 sd_pos=1030148 sysload=0.12 cputime=187.521 memavail=7289400 print_time=3642.420 buffer_time=2.767 print_stall=0 extruder: target=240 temp=240.1 pwm=0.424
Stats 798417.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6257182 bytes_read=1352988 bytes_retransmit=9 bytes_invalid=0 send_seq=119246 receive_seq=119246 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=403 freq=119992791 heater_bed: target=80 temp=80.1 pwm=0.386 sd_pos=1030526 sysload=0.12 cputime=187.592 memavail=7289400 print_time=3643.109 buffer_time=2.457 print_stall=0 extruder: target=240 temp=239.9 pwm=0.523
Stats 798418.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6259538 bytes_read=1353501 bytes_retransmit=9 bytes_invalid=0 send_seq=119293 receive_seq=119293 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.1 pwm=0.469 sd_pos=1031110 sysload=0.12 cputime=187.652 memavail=7289152 print_time=3643.693 buffer_time=2.040 print_stall=0 extruder: target=240 temp=239.7 pwm=0.578
Stats 798419.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6264061 bytes_read=1354219 bytes_retransmit=9 bytes_invalid=0 send_seq=119378 receive_seq=119378 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=1032713 sysload=0.12 cputime=187.730 memavail=7289152 print_time=3644.982 buffer_time=2.329 print_stall=0 extruder: target=240 temp=240.2 pwm=0.356
Stats 798420.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6266335 bytes_read=1354741 bytes_retransmit=9 bytes_invalid=0 send_seq=119424 receive_seq=119424 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.0 pwm=0.559 sd_pos=1033260 sysload=0.11 cputime=187.800 memavail=7289152 print_time=3645.723 buffer_time=2.069 print_stall=0 extruder: target=240 temp=239.9 pwm=0.467
Stats 798421.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6271126 bytes_read=1355454 bytes_retransmit=9 bytes_invalid=0 send_seq=119511 receive_seq=119511 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.556 sd_pos=1034217 sysload=0.11 cputime=187.895 memavail=7289152 print_time=3647.100 buffer_time=2.445 print_stall=0 extruder: target=240 temp=239.9 pwm=0.518
Stats 798422.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6274720 bytes_read=1356103 bytes_retransmit=9 bytes_invalid=0 send_seq=119579 receive_seq=119579 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.556 sd_pos=1034726 sysload=0.11 cputime=187.968 memavail=7289152 print_time=3647.869 buffer_time=2.213 print_stall=0 extruder: target=240 temp=240.0 pwm=0.440
Stats 798423.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6278370 bytes_read=1356740 bytes_retransmit=9 bytes_invalid=0 send_seq=119648 receive_seq=119648 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=79.9 pwm=0.541 sd_pos=1035359 sysload=0.11 cputime=188.040 memavail=7289152 print_time=3649.249 buffer_time=2.592 print_stall=0 extruder: target=240 temp=239.8 pwm=0.500
Stats 798424.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6280663 bytes_read=1357253 bytes_retransmit=9 bytes_invalid=0 send_seq=119695 receive_seq=119695 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992798 heater_bed: target=80 temp=79.9 pwm=0.522 sd_pos=1035972 sysload=0.11 cputime=188.111 memavail=7288796 print_time=3649.895 buffer_time=2.238 print_stall=0 extruder: target=240 temp=239.8 pwm=0.486
Stats 798425.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6284973 bytes_read=1357965 bytes_retransmit=9 bytes_invalid=0 send_seq=119776 receive_seq=119776 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=79.9 pwm=0.423 sd_pos=1036861 sysload=0.10 cputime=188.180 memavail=7288880 print_time=3651.310 buffer_time=2.652 print_stall=0 extruder: target=240 temp=239.8 pwm=0.501
Stats 798426.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6288000 bytes_read=1358538 bytes_retransmit=9 bytes_invalid=0 send_seq=119835 receive_seq=119835 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=79.9 pwm=0.394 sd_pos=1037324 sysload=0.10 cputime=188.234 memavail=7288880 print_time=3651.974 buffer_time=2.315 print_stall=0 extruder: target=240 temp=240.0 pwm=0.436
Stats 798427.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6290886 bytes_read=1359108 bytes_retransmit=9 bytes_invalid=0 send_seq=119891 receive_seq=119891 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.0 pwm=0.367 sd_pos=1038018 sysload=0.10 cputime=188.285 memavail=7288880 print_time=3652.777 buffer_time=2.118 print_stall=0 extruder: target=240 temp=240.1 pwm=0.420
Stats 798428.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6292712 bytes_read=1359606 bytes_retransmit=9 bytes_invalid=0 send_seq=119931 receive_seq=119931 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=1038072 sysload=0.10 cputime=188.370 memavail=7288656 print_time=3653.982 buffer_time=2.322 print_stall=0 extruder: target=240 temp=239.9 pwm=0.527
Stats 798429.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6293913 bytes_read=1360021 bytes_retransmit=9 bytes_invalid=0 send_seq=119959 receive_seq=119959 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.310 sd_pos=1038211 sysload=0.10 cputime=188.419 memavail=7288656 print_time=3654.823 buffer_time=2.162 print_stall=0 extruder: target=240 temp=239.8 pwm=0.527
Stats 798430.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6294708 bytes_read=1360399 bytes_retransmit=9 bytes_invalid=0 send_seq=119979 receive_seq=119979 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992775 heater_bed: target=80 temp=80.0 pwm=0.364 sd_pos=1038324 sysload=0.17 cputime=188.481 memavail=7288656 print_time=3655.821 buffer_time=2.159 print_stall=0 extruder: target=240 temp=239.8 pwm=0.511
Stats 798431.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6296019 bytes_read=1360856 bytes_retransmit=9 bytes_invalid=0 send_seq=120009 receive_seq=120009 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992775 heater_bed: target=80 temp=80.0 pwm=0.324 sd_pos=1038446 sysload=0.17 cputime=188.542 memavail=7288432 print_time=3656.997 buffer_time=2.335 print_stall=0 extruder: target=240 temp=239.8 pwm=0.453
Stats 798432.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=6299803 bytes_read=1361514 bytes_retransmit=9 bytes_invalid=0 send_seq=120082 receive_seq=120082 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.1 pwm=0.298 sd_pos=1039072 sysload=0.17 cputime=188.614 memavail=7288432 print_time=3657.811 buffer_time=2.148 print_stall=0 extruder: target=240 temp=240.1 pwm=0.341
Stats 798433.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=6304622 bytes_read=1362237 bytes_retransmit=9 bytes_invalid=0 send_seq=120171 receive_seq=120171 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1847 freq=119992773 heater_bed: target=80 temp=80.1 pwm=0.344 sd_pos=1040487 sysload=0.17 cputime=188.705 memavail=7288432 print_time=3659.086 buffer_time=2.423 print_stall=0 extruder: target=240 temp=240.0 pwm=0.462
Stats 798434.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=6308433 bytes_read=1362879 bytes_retransmit=9 bytes_invalid=0 send_seq=120238 receive_seq=120238 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1572 freq=119992806 heater_bed: target=80 temp=80.1 pwm=0.347 sd_pos=1041295 sysload=0.17 cputime=188.797 memavail=7288432 print_time=3659.721 buffer_time=2.057 print_stall=0 extruder: target=240 temp=239.8 pwm=0.557
Stats 798435.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=6313814 bytes_read=1363622 bytes_retransmit=9 bytes_invalid=0 send_seq=120331 receive_seq=120331 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=2911 freq=119992799 heater_bed: target=80 temp=80.1 pwm=0.428 sd_pos=1042765 sysload=0.16 cputime=188.914 memavail=7288432 print_time=3661.008 buffer_time=2.344 print_stall=0 extruder: target=240 temp=239.8 pwm=0.499
Stats 798436.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=6319162 bytes_read=1364360 bytes_retransmit=9 bytes_invalid=0 send_seq=120423 receive_seq=120423 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=2856 freq=119992793 heater_bed: target=80 temp=80.1 pwm=0.314 sd_pos=1043563 sysload=0.16 cputime=189.030 memavail=7288432 print_time=3662.215 buffer_time=2.550 print_stall=0 extruder: target=240 temp=239.7 pwm=0.545
Stats 798437.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6324213 bytes_read=1365113 bytes_retransmit=9 bytes_invalid=0 send_seq=120509 receive_seq=120509 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=80.1 pwm=0.447 sd_pos=1043935 sysload=0.16 cputime=189.132 memavail=7288208 print_time=3662.795 buffer_time=2.129 print_stall=0 extruder: target=240 temp=240.0 pwm=0.392
Stats 798438.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6326454 bytes_read=1365621 bytes_retransmit=9 bytes_invalid=0 send_seq=120555 receive_seq=120555 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.1 pwm=0.365 sd_pos=1044293 sysload=0.16 cputime=189.201 memavail=7287456 print_time=3663.666 buffer_time=2.000 print_stall=0 extruder: target=240 temp=239.9 pwm=0.484
Stats 798439.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6329648 bytes_read=1366209 bytes_retransmit=9 bytes_invalid=0 send_seq=120617 receive_seq=120617 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=80.1 pwm=0.311 sd_pos=1045061 sysload=0.16 cputime=189.285 memavail=7287456 print_time=3664.913 buffer_time=2.247 print_stall=0 extruder: target=240 temp=240.3 pwm=0.351
Stats 798440.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6332861 bytes_read=1366831 bytes_retransmit=9 bytes_invalid=0 send_seq=120680 receive_seq=120680 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=80.1 pwm=0.409 sd_pos=1045862 sysload=0.15 cputime=189.360 memavail=7287456 print_time=3665.670 buffer_time=2.003 print_stall=0 extruder: target=240 temp=239.8 pwm=0.586
Stats 798441.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6338451 bytes_read=1367614 bytes_retransmit=9 bytes_invalid=0 send_seq=120781 receive_seq=120781 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1985 freq=119992774 heater_bed: target=80 temp=80.1 pwm=0.412 sd_pos=1047366 sysload=0.15 cputime=189.451 memavail=7287232 print_time=3667.437 buffer_time=2.769 print_stall=0 extruder: target=240 temp=240.0 pwm=0.444
Stats 798442.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6342478 bytes_read=1368268 bytes_retransmit=9 bytes_invalid=0 send_seq=120853 receive_seq=120853 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=776 freq=119992768 heater_bed: target=80 temp=80.1 pwm=0.471 sd_pos=1048033 sysload=0.15 cputime=189.542 memavail=7287232 print_time=3668.039 buffer_time=2.369 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 798443.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6345605 bytes_read=1368896 bytes_retransmit=9 bytes_invalid=0 send_seq=120915 receive_seq=120915 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.1 pwm=0.499 sd_pos=1048645 sysload=0.15 cputime=189.616 memavail=7287232 print_time=3668.786 buffer_time=2.113 print_stall=0 extruder: target=240 temp=240.0 pwm=0.485
Stats 798444.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6349195 bytes_read=1369524 bytes_retransmit=9 bytes_invalid=0 send_seq=120985 receive_seq=120985 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.1 pwm=0.438 sd_pos=1049855 sysload=0.15 cputime=189.700 memavail=7287232 print_time=3669.765 buffer_time=2.085 print_stall=0 extruder: target=240 temp=240.3 pwm=0.344
Stats 798445.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6353998 bytes_read=1370252 bytes_retransmit=9 bytes_invalid=0 send_seq=121072 receive_seq=121072 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.1 pwm=0.420 sd_pos=1051072 sysload=0.21 cputime=189.772 memavail=7287232 print_time=3671.284 buffer_time=2.603 print_stall=0 extruder: target=240 temp=240.0 pwm=0.553
Stats 798446.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6357303 bytes_read=1370864 bytes_retransmit=9 bytes_invalid=0 send_seq=121136 receive_seq=121136 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.1 pwm=0.399 sd_pos=1051703 sysload=0.21 cputime=189.834 memavail=7287232 print_time=3672.115 buffer_time=2.434 print_stall=0 extruder: target=240 temp=240.2 pwm=0.377
Stats 798447.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6359852 bytes_read=1371413 bytes_retransmit=9 bytes_invalid=0 send_seq=121187 receive_seq=121187 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=80.1 pwm=0.342 sd_pos=1051955 sysload=0.21 cputime=189.888 memavail=7287232 print_time=3672.709 buffer_time=2.027 print_stall=0 extruder: target=240 temp=240.2 pwm=0.430
Stats 798448.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6362999 bytes_read=1372011 bytes_retransmit=9 bytes_invalid=0 send_seq=121248 receive_seq=121248 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.1 pwm=0.415 sd_pos=1053298 sysload=0.21 cputime=189.955 memavail=7287988 print_time=3673.798 buffer_time=2.115 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 798449.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6366522 bytes_read=1372633 bytes_retransmit=9 bytes_invalid=0 send_seq=121314 receive_seq=121314 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992753 heater_bed: target=80 temp=80.1 pwm=0.316 sd_pos=1054146 sysload=0.21 cputime=190.029 memavail=7287988 print_time=3675.022 buffer_time=2.339 print_stall=0 extruder: target=240 temp=240.2 pwm=0.382
Stats 798450.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6369338 bytes_read=1373186 bytes_retransmit=9 bytes_invalid=0 send_seq=121369 receive_seq=121369 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992751 heater_bed: target=80 temp=80.1 pwm=0.430 sd_pos=1054588 sysload=0.20 cputime=190.086 memavail=7287988 print_time=3675.838 buffer_time=2.154 print_stall=0 extruder: target=240 temp=240.3 pwm=0.382
Stats 798451.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6374891 bytes_read=1373979 bytes_retransmit=9 bytes_invalid=0 send_seq=121469 receive_seq=121469 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=69 freq=119992765 heater_bed: target=80 temp=80.1 pwm=0.359 sd_pos=1055588 sysload=0.20 cputime=190.164 memavail=7287988 print_time=3677.054 buffer_time=2.369 print_stall=0 extruder: target=240 temp=240.0 pwm=0.520
Stats 798452.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=6376824 bytes_read=1374487 bytes_retransmit=9 bytes_invalid=0 send_seq=121509 receive_seq=121509 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.1 pwm=0.364 sd_pos=1055982 sysload=0.20 cputime=190.220 memavail=7287988 print_time=3678.050 buffer_time=2.364 print_stall=0 extruder: target=240 temp=240.0 pwm=0.443
Stats 798453.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=6378903 bytes_read=1374975 bytes_retransmit=9 bytes_invalid=0 send_seq=121551 receive_seq=121551 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=80.1 pwm=0.455 sd_pos=1056271 sysload=0.20 cputime=190.271 memavail=7287988 print_time=3678.955 buffer_time=2.268 print_stall=0 extruder: target=240 temp=239.8 pwm=0.479
Stats 798454.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=6382683 bytes_read=1375623 bytes_retransmit=9 bytes_invalid=0 send_seq=121622 receive_seq=121622 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=80.1 pwm=0.387 sd_pos=1057032 sysload=0.20 cputime=190.351 memavail=7287884 print_time=3680.202 buffer_time=2.513 print_stall=0 extruder: target=240 temp=239.8 pwm=0.479
Stats 798455.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=6386066 bytes_read=1376240 bytes_retransmit=9 bytes_invalid=0 send_seq=121687 receive_seq=121687 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.1 pwm=0.325 sd_pos=1057626 sysload=0.18 cputime=190.415 memavail=7287968 print_time=3681.025 buffer_time=2.336 print_stall=0 extruder: target=240 temp=240.1 pwm=0.400
Stats 798456.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=6388800 bytes_read=1376798 bytes_retransmit=9 bytes_invalid=0 send_seq=121743 receive_seq=121743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.1 pwm=0.459 sd_pos=1057931 sysload=0.18 cputime=190.468 memavail=7287968 print_time=3681.690 buffer_time=2.000 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 798457.2: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=6391723 bytes_read=1377397 bytes_retransmit=9 bytes_invalid=0 send_seq=121801 receive_seq=121801 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=80.1 pwm=0.480 sd_pos=1058582 sysload=0.18 cputime=190.532 memavail=7287972 print_time=3683.077 buffer_time=2.386 print_stall=0 extruder: target=240 temp=240.1 pwm=0.462
Stats 798458.2: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=6393454 bytes_read=1377889 bytes_retransmit=9 bytes_invalid=0 send_seq=121841 receive_seq=121841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.1 pwm=0.439 sd_pos=1058721 sysload=0.18 cputime=190.584 memavail=7287468 print_time=3684.167 buffer_time=2.475 print_stall=0 extruder: target=240 temp=240.0 pwm=0.458
Stats 798459.2: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=6394307 bytes_read=1378282 bytes_retransmit=9 bytes_invalid=0 send_seq=121864 receive_seq=121864 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.1 pwm=0.439 sd_pos=1058790 sysload=0.18 cputime=190.637 memavail=7287468 print_time=3685.095 buffer_time=2.403 print_stall=0 extruder: target=240 temp=240.0 pwm=0.412
Stats 798460.2: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=6395990 bytes_read=1378755 bytes_retransmit=9 bytes_invalid=0 send_seq=121900 receive_seq=121900 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=80.1 pwm=0.441 sd_pos=1058968 sysload=0.17 cputime=190.693 memavail=7287468 print_time=3686.540 buffer_time=2.846 print_stall=0 extruder: target=240 temp=239.9 pwm=0.449
Stats 798461.2: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000018 bytes_write=6399710 bytes_read=1379397 bytes_retransmit=9 bytes_invalid=0 send_seq=121970 receive_seq=121970 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992817 heater_bed: target=80 temp=80.1 pwm=0.525 sd_pos=1059516 sysload=0.17 cputime=190.754 memavail=7287468 print_time=3687.334 buffer_time=2.640 print_stall=0 extruder: target=240 temp=239.9 pwm=0.486
Stats 798462.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6403355 bytes_read=1380036 bytes_retransmit=9 bytes_invalid=0 send_seq=122039 receive_seq=122039 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=80 temp=80.0 pwm=0.449 sd_pos=1060066 sysload=0.17 cputime=190.810 memavail=7287468 print_time=3687.988 buffer_time=2.292 print_stall=0 extruder: target=240 temp=239.8 pwm=0.552
Stats 798463.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6406067 bytes_read=1380586 bytes_retransmit=9 bytes_invalid=0 send_seq=122092 receive_seq=122092 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=3521 freq=119992812 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=1061510 sysload=0.17 cputime=190.896 memavail=7287468 print_time=3689.228 buffer_time=2.531 print_stall=0 extruder: target=240 temp=240.0 pwm=0.404
Stats 798464.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6411275 bytes_read=1381320 bytes_retransmit=9 bytes_invalid=0 send_seq=122182 receive_seq=122182 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1816 freq=119992813 heater_bed: target=80 temp=80.0 pwm=0.611 sd_pos=1062121 sysload=0.17 cputime=190.992 memavail=7287468 print_time=3689.821 buffer_time=2.124 print_stall=0 extruder: target=240 temp=240.0 pwm=0.461
Stats 798465.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6416494 bytes_read=1382047 bytes_retransmit=9 bytes_invalid=0 send_seq=122272 receive_seq=122272 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=2165 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.514 sd_pos=1063062 sysload=0.15 cputime=191.091 memavail=7290524 print_time=3690.880 buffer_time=2.182 print_stall=0 extruder: target=240 temp=239.7 pwm=0.517
Stats 798466.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6421312 bytes_read=1382750 bytes_retransmit=9 bytes_invalid=0 send_seq=122354 receive_seq=122354 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=79.9 pwm=0.526 sd_pos=1063340 sysload=0.15 cputime=191.183 memavail=7290052 print_time=3691.875 buffer_time=2.175 print_stall=0 extruder: target=240 temp=239.9 pwm=0.464
Stats 798467.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6423869 bytes_read=1383303 bytes_retransmit=9 bytes_invalid=0 send_seq=122403 receive_seq=122403 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=79.9 pwm=0.509 sd_pos=1063822 sysload=0.15 cputime=191.239 memavail=7292556 print_time=3692.722 buffer_time=2.021 print_stall=0 extruder: target=240 temp=240.2 pwm=0.334
Stats 798468.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6426120 bytes_read=1383811 bytes_retransmit=9 bytes_invalid=0 send_seq=122449 receive_seq=122449 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=79.9 pwm=0.434 sd_pos=1064235 sysload=0.15 cputime=191.296 memavail=7291832 print_time=3693.798 buffer_time=2.097 print_stall=0 extruder: target=240 temp=240.0 pwm=0.431
Stats 798469.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6431120 bytes_read=1384554 bytes_retransmit=9 bytes_invalid=0 send_seq=122539 receive_seq=122539 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992849 heater_bed: target=80 temp=79.9 pwm=0.434 sd_pos=1065204 sysload=0.15 cputime=191.380 memavail=7291832 print_time=3695.202 buffer_time=2.500 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 798470.2: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6434301 bytes_read=1385141 bytes_retransmit=9 bytes_invalid=0 send_seq=122598 receive_seq=122598 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992844 heater_bed: target=80 temp=79.9 pwm=0.434 sd_pos=1065591 sysload=0.14 cputime=191.445 memavail=7291832 print_time=3696.095 buffer_time=2.392 print_stall=0 extruder: target=240 temp=240.2 pwm=0.352
Stats 798471.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6437888 bytes_read=1385775 bytes_retransmit=9 bytes_invalid=0 send_seq=122666 receive_seq=122666 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992835 heater_bed: target=80 temp=79.9 pwm=0.434 sd_pos=1066270 sysload=0.14 cputime=191.511 memavail=7291580 print_time=3697.045 buffer_time=2.342 print_stall=0 extruder: target=240 temp=239.9 pwm=0.482
Stats 798472.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6440601 bytes_read=1386333 bytes_retransmit=9 bytes_invalid=0 send_seq=122719 receive_seq=122719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=79.9 pwm=0.490 sd_pos=1067202 sysload=0.14 cputime=191.573 memavail=7291580 print_time=3697.860 buffer_time=2.156 print_stall=0 extruder: target=240 temp=240.1 pwm=0.414
Stats 798473.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6443775 bytes_read=1386935 bytes_retransmit=9 bytes_invalid=0 send_seq=122781 receive_seq=122781 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=79.9 pwm=0.480 sd_pos=1067953 sysload=0.14 cputime=191.645 memavail=7291580 print_time=3698.989 buffer_time=2.284 print_stall=0 extruder: target=240 temp=240.3 pwm=0.343
Stats 798474.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6446740 bytes_read=1387498 bytes_retransmit=9 bytes_invalid=0 send_seq=122838 receive_seq=122838 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992806 heater_bed: target=80 temp=79.9 pwm=0.538 sd_pos=1068300 sysload=0.14 cputime=191.714 memavail=7291580 print_time=3699.801 buffer_time=2.096 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 798475.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6452203 bytes_read=1388286 bytes_retransmit=9 bytes_invalid=0 send_seq=122937 receive_seq=122937 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=579 freq=119992804 heater_bed: target=80 temp=79.9 pwm=0.440 sd_pos=1069897 sysload=0.13 cputime=191.809 memavail=7291580 print_time=3701.150 buffer_time=2.444 print_stall=0 extruder: target=240 temp=240.1 pwm=0.451
Stats 798476.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6455544 bytes_read=1388883 bytes_retransmit=9 bytes_invalid=0 send_seq=122998 receive_seq=122998 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992832 heater_bed: target=80 temp=79.8 pwm=0.539 sd_pos=1070225 sysload=0.13 cputime=191.887 memavail=7291580 print_time=3701.887 buffer_time=2.180 print_stall=0 extruder: target=240 temp=240.1 pwm=0.428
Stats 798477.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6460280 bytes_read=1389602 bytes_retransmit=9 bytes_invalid=0 send_seq=123083 receive_seq=123083 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=89 freq=119992831 heater_bed: target=80 temp=79.8 pwm=0.539 sd_pos=1071461 sysload=0.13 cputime=191.970 memavail=7291580 print_time=3703.251 buffer_time=2.544 print_stall=0 extruder: target=240 temp=240.1 pwm=0.399
Stats 798478.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6463130 bytes_read=1390175 bytes_retransmit=9 bytes_invalid=0 send_seq=123139 receive_seq=123139 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992828 heater_bed: target=80 temp=79.8 pwm=0.473 sd_pos=1072317 sysload=0.13 cputime=192.039 memavail=7291080 print_time=3703.986 buffer_time=2.278 print_stall=0 extruder: target=240 temp=240.0 pwm=0.433
Stats 798479.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6467457 bytes_read=1390862 bytes_retransmit=9 bytes_invalid=0 send_seq=123218 receive_seq=123218 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=79.8 pwm=0.473 sd_pos=1073373 sysload=0.13 cputime=192.116 memavail=7291080 print_time=3705.277 buffer_time=2.568 print_stall=0 extruder: target=240 temp=239.8 pwm=0.543
Stats 798480.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6471224 bytes_read=1391495 bytes_retransmit=9 bytes_invalid=0 send_seq=123289 receive_seq=123289 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=79.8 pwm=0.489 sd_pos=1073906 sysload=0.12 cputime=192.189 memavail=7291080 print_time=3706.115 buffer_time=2.405 print_stall=0 extruder: target=240 temp=240.1 pwm=0.389
Stats 798481.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6474918 bytes_read=1392138 bytes_retransmit=9 bytes_invalid=0 send_seq=123359 receive_seq=123359 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=71 freq=119992815 heater_bed: target=80 temp=79.8 pwm=0.489 sd_pos=1074573 sysload=0.12 cputime=192.266 memavail=7291080 print_time=3707.507 buffer_time=2.796 print_stall=0 extruder: target=240 temp=239.8 pwm=0.464
Stats 798482.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6476301 bytes_read=1392601 bytes_retransmit=9 bytes_invalid=0 send_seq=123390 receive_seq=123390 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=80 temp=79.8 pwm=0.489 sd_pos=1075042 sysload=0.12 cputime=192.333 memavail=7291080 print_time=3707.772 buffer_time=2.061 print_stall=0 extruder: target=240 temp=240.3 pwm=0.329
Stats 798483.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6478407 bytes_read=1393104 bytes_retransmit=9 bytes_invalid=0 send_seq=123435 receive_seq=123435 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=79.8 pwm=0.489 sd_pos=1075386 sysload=0.12 cputime=192.399 memavail=7291080 print_time=3708.752 buffer_time=2.039 print_stall=0 extruder: target=240 temp=240.0 pwm=0.484
Stats 798484.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6484798 bytes_read=1393977 bytes_retransmit=9 bytes_invalid=0 send_seq=123551 receive_seq=123551 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=79.8 pwm=0.441 sd_pos=1076606 sysload=0.12 cputime=192.506 memavail=7290752 print_time=3710.286 buffer_time=2.572 print_stall=0 extruder: target=240 temp=240.1 pwm=0.427
Stats 798485.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6487653 bytes_read=1394544 bytes_retransmit=9 bytes_invalid=0 send_seq=123606 receive_seq=123606 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=755 freq=119992795 heater_bed: target=80 temp=79.8 pwm=0.498 sd_pos=1077605 sysload=0.11 cputime=192.585 memavail=7290828 print_time=3711.015 buffer_time=2.299 print_stall=0 extruder: target=240 temp=239.8 pwm=0.532
Stats 798486.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6490396 bytes_read=1395072 bytes_retransmit=9 bytes_invalid=0 send_seq=123656 receive_seq=123656 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=79.8 pwm=0.455 sd_pos=1077741 sysload=0.11 cputime=192.658 memavail=7290828 print_time=3711.897 buffer_time=2.180 print_stall=0 extruder: target=240 temp=240.0 pwm=0.457
Stats 798487.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6491550 bytes_read=1395516 bytes_retransmit=9 bytes_invalid=0 send_seq=123683 receive_seq=123683 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=79.9 pwm=0.381 sd_pos=1077796 sysload=0.11 cputime=192.737 memavail=7290828 print_time=3712.801 buffer_time=2.083 print_stall=0 extruder: target=240 temp=240.0 pwm=0.398
Stats 798488.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6492912 bytes_read=1395958 bytes_retransmit=9 bytes_invalid=0 send_seq=123713 receive_seq=123713 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=79.9 pwm=0.381 sd_pos=1077963 sysload=0.11 cputime=192.805 memavail=7290324 print_time=3714.150 buffer_time=2.431 print_stall=0 extruder: target=240 temp=240.2 pwm=0.384
Stats 798489.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6494022 bytes_read=1396361 bytes_retransmit=9 bytes_invalid=0 send_seq=123738 receive_seq=123738 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=79.9 pwm=0.434 sd_pos=1078019 sysload=0.11 cputime=192.856 memavail=7290324 print_time=3714.740 buffer_time=2.020 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 798490.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6498182 bytes_read=1397049 bytes_retransmit=9 bytes_invalid=0 send_seq=123817 receive_seq=123817 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992772 heater_bed: target=80 temp=79.9 pwm=0.383 sd_pos=1078683 sysload=0.10 cputime=192.939 memavail=7290324 print_time=3716.367 buffer_time=2.646 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 798491.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6501821 bytes_read=1397681 bytes_retransmit=9 bytes_invalid=0 send_seq=123885 receive_seq=123885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.0 pwm=0.383 sd_pos=1079263 sysload=0.10 cputime=193.012 memavail=7290328 print_time=3717.014 buffer_time=2.291 print_stall=0 extruder: target=240 temp=240.1 pwm=0.406
Stats 798492.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6504554 bytes_read=1398240 bytes_retransmit=9 bytes_invalid=0 send_seq=123938 receive_seq=123938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=3359 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.330 sd_pos=1080695 sysload=0.10 cputime=193.099 memavail=7290328 print_time=3718.194 buffer_time=2.470 print_stall=0 extruder: target=240 temp=240.0 pwm=0.495
Stats 798493.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6509799 bytes_read=1398973 bytes_retransmit=9 bytes_invalid=0 send_seq=124026 receive_seq=124026 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1803 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1081359 sysload=0.10 cputime=193.206 memavail=7290328 print_time=3718.813 buffer_time=2.089 print_stall=0 extruder: target=240 temp=239.7 pwm=0.595
Stats 798494.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6515133 bytes_read=1399725 bytes_retransmit=9 bytes_invalid=0 send_seq=124118 receive_seq=124118 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=1652 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.331 sd_pos=1082370 sysload=0.10 cputime=193.327 memavail=7290328 print_time=3719.760 buffer_time=2.036 print_stall=0 extruder: target=240 temp=239.8 pwm=0.526
Stats 798495.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6520472 bytes_read=1400458 bytes_retransmit=9 bytes_invalid=0 send_seq=124209 receive_seq=124209 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1082911 sysload=0.09 cputime=193.423 memavail=7290328 print_time=3721.252 buffer_time=2.526 print_stall=0 extruder: target=240 temp=239.9 pwm=0.435
Stats 798496.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6522578 bytes_read=1400971 bytes_retransmit=9 bytes_invalid=0 send_seq=124253 receive_seq=124253 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=80.0 pwm=0.363 sd_pos=1083228 sysload=0.09 cputime=193.495 memavail=7290476 print_time=3722.147 buffer_time=2.421 print_stall=0 extruder: target=240 temp=240.0 pwm=0.451
Stats 798497.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6526706 bytes_read=1401664 bytes_retransmit=9 bytes_invalid=0 send_seq=124330 receive_seq=124330 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=1084064 sysload=0.09 cputime=193.561 memavail=7290356 print_time=3723.514 buffer_time=2.786 print_stall=0 extruder: target=240 temp=239.8 pwm=0.542
Stats 798498.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6529685 bytes_read=1402225 bytes_retransmit=9 bytes_invalid=0 send_seq=124387 receive_seq=124387 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=1084720 sysload=0.09 cputime=193.623 memavail=7290360 print_time=3724.170 buffer_time=2.442 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 798499.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6532340 bytes_read=1402770 bytes_retransmit=9 bytes_invalid=0 send_seq=124439 receive_seq=124439 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.1 pwm=0.335 sd_pos=1085135 sysload=0.09 cputime=193.681 memavail=7290360 print_time=3724.848 buffer_time=2.119 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 798500.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6536098 bytes_read=1403404 bytes_retransmit=9 bytes_invalid=0 send_seq=124509 receive_seq=124509 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=80.0 pwm=0.449 sd_pos=1085941 sysload=0.08 cputime=193.760 memavail=7290360 print_time=3725.885 buffer_time=2.155 print_stall=0 extruder: target=240 temp=240.1 pwm=0.428
Stats 798501.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=6539751 bytes_read=1404026 bytes_retransmit=9 bytes_invalid=0 send_seq=124578 receive_seq=124578 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.513 sd_pos=1087011 sysload=0.08 cputime=193.826 memavail=7290360 print_time=3727.157 buffer_time=2.427 print_stall=0 extruder: target=240 temp=240.0 pwm=0.458
Stats 798502.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6542551 bytes_read=1404620 bytes_retransmit=9 bytes_invalid=0 send_seq=124635 receive_seq=124635 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=1087724 sysload=0.08 cputime=193.890 memavail=7290360 print_time=3728.083 buffer_time=2.352 print_stall=0 extruder: target=240 temp=240.0 pwm=0.433
Stats 798503.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6546809 bytes_read=1405318 bytes_retransmit=9 bytes_invalid=0 send_seq=124714 receive_seq=124714 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.0 pwm=0.519 sd_pos=1088294 sysload=0.08 cputime=193.953 memavail=7290360 print_time=3729.010 buffer_time=2.278 print_stall=0 extruder: target=240 temp=240.4 pwm=0.320
Stats 798504.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6550953 bytes_read=1405981 bytes_retransmit=9 bytes_invalid=0 send_seq=124791 receive_seq=124791 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1547 freq=119992781 heater_bed: target=80 temp=80.0 pwm=0.521 sd_pos=1089101 sysload=0.08 cputime=194.032 memavail=7290360 print_time=3730.468 buffer_time=2.736 print_stall=0 extruder: target=240 temp=240.0 pwm=0.507
Stats 798505.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6554521 bytes_read=1406594 bytes_retransmit=9 bytes_invalid=0 send_seq=124855 receive_seq=124855 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=1089576 sysload=0.16 cputime=194.110 memavail=7290360 print_time=3730.903 buffer_time=2.170 print_stall=0 extruder: target=240 temp=239.9 pwm=0.524
Stats 798506.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6557965 bytes_read=1407216 bytes_retransmit=9 bytes_invalid=0 send_seq=124921 receive_seq=124921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992775 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=1090347 sysload=0.16 cputime=194.181 memavail=7290360 print_time=3731.954 buffer_time=2.221 print_stall=0 extruder: target=240 temp=240.0 pwm=0.424
Stats 798507.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6561524 bytes_read=1407850 bytes_retransmit=9 bytes_invalid=0 send_seq=124989 receive_seq=124989 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=79.9 pwm=0.546 sd_pos=1091675 sysload=0.16 cputime=194.251 memavail=7290360 print_time=3733.171 buffer_time=2.437 print_stall=0 extruder: target=240 temp=240.0 pwm=0.415
Stats 798508.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6564802 bytes_read=1408458 bytes_retransmit=9 bytes_invalid=0 send_seq=125052 receive_seq=125052 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=79.9 pwm=0.461 sd_pos=1092126 sysload=0.16 cputime=194.314 memavail=7290140 print_time=3734.014 buffer_time=2.279 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 798509.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6568689 bytes_read=1409075 bytes_retransmit=9 bytes_invalid=0 send_seq=125127 receive_seq=125117 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=79.9 pwm=0.511 sd_pos=1092634 sysload=0.16 cputime=194.385 memavail=7290140 print_time=3734.933 buffer_time=2.198 print_stall=0 extruder: target=240 temp=240.0 pwm=0.472
Stats 798510.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6571826 bytes_read=1409688 bytes_retransmit=9 bytes_invalid=0 send_seq=125184 receive_seq=125184 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=79.9 pwm=0.511 sd_pos=1093186 sysload=0.14 cputime=194.449 memavail=7289916 print_time=3736.074 buffer_time=2.338 print_stall=0 extruder: target=240 temp=239.9 pwm=0.472
Stats 798511.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6575207 bytes_read=1410301 bytes_retransmit=9 bytes_invalid=0 send_seq=125248 receive_seq=125248 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=79.9 pwm=0.511 sd_pos=1094045 sysload=0.14 cputime=194.514 memavail=7289916 print_time=3737.361 buffer_time=2.624 print_stall=0 extruder: target=240 temp=240.0 pwm=0.448
Stats 798512.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6578821 bytes_read=1410944 bytes_retransmit=9 bytes_invalid=0 send_seq=125315 receive_seq=125315 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=79.9 pwm=0.418 sd_pos=1094749 sysload=0.14 cputime=194.580 memavail=7289916 print_time=3738.195 buffer_time=2.457 print_stall=0 extruder: target=240 temp=240.1 pwm=0.448
Stats 798513.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6581919 bytes_read=1411517 bytes_retransmit=9 bytes_invalid=0 send_seq=125374 receive_seq=125374 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=79.9 pwm=0.478 sd_pos=1095518 sysload=0.14 cputime=194.643 memavail=7289916 print_time=3738.924 buffer_time=2.186 print_stall=0 extruder: target=240 temp=240.0 pwm=0.446
Stats 798514.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6584344 bytes_read=1412060 bytes_retransmit=9 bytes_invalid=0 send_seq=125424 receive_seq=125424 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=79.9 pwm=0.419 sd_pos=1095854 sysload=0.14 cputime=194.710 memavail=7289916 print_time=3739.701 buffer_time=1.963 print_stall=0 extruder: target=240 temp=240.2 pwm=0.338
Stats 798515.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6586068 bytes_read=1412542 bytes_retransmit=9 bytes_invalid=0 send_seq=125462 receive_seq=125462 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=79.9 pwm=0.502 sd_pos=1096019 sysload=0.29 cputime=194.767 memavail=7293336 print_time=3741.248 buffer_time=2.509 print_stall=0 extruder: target=240 temp=239.9 pwm=0.496
Stats 798516.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6586933 bytes_read=1412935 bytes_retransmit=9 bytes_invalid=0 send_seq=125485 receive_seq=125485 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=79.9 pwm=0.404 sd_pos=1096088 sysload=0.29 cputime=194.810 memavail=7293336 print_time=3742.176 buffer_time=2.436 print_stall=0 extruder: target=240 temp=240.1 pwm=0.358
Stats 798517.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6588087 bytes_read=1413389 bytes_retransmit=9 bytes_invalid=0 send_seq=125514 receive_seq=125514 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=79.9 pwm=0.375 sd_pos=1096144 sysload=0.29 cputime=194.875 memavail=7293336 print_time=3742.766 buffer_time=2.026 print_stall=0 extruder: target=240 temp=239.9 pwm=0.512
Stats 798518.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6592096 bytes_read=1414056 bytes_retransmit=9 bytes_invalid=0 send_seq=125589 receive_seq=125589 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=80.0 pwm=0.375 sd_pos=1096752 sysload=0.29 cputime=194.938 memavail=7292580 print_time=3744.374 buffer_time=2.633 print_stall=0 extruder: target=240 temp=240.1 pwm=0.401
Stats 798519.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6595521 bytes_read=1414664 bytes_retransmit=9 bytes_invalid=0 send_seq=125655 receive_seq=125655 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.371 sd_pos=1097252 sysload=0.29 cputime=194.983 memavail=7292580 print_time=3744.998 buffer_time=2.257 print_stall=0 extruder: target=240 temp=240.0 pwm=0.470
Stats 798520.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6598593 bytes_read=1415247 bytes_retransmit=9 bytes_invalid=0 send_seq=125713 receive_seq=125713 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2939 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.357 sd_pos=1098428 sysload=0.27 cputime=195.062 memavail=7292580 print_time=3746.169 buffer_time=2.427 print_stall=0 extruder: target=240 temp=239.8 pwm=0.470
Stats 798521.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6603637 bytes_read=1415969 bytes_retransmit=9 bytes_invalid=0 send_seq=125799 receive_seq=125799 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=1610 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=1099062 sysload=0.27 cputime=195.166 memavail=7291684 print_time=3746.792 buffer_time=2.050 print_stall=0 extruder: target=240 temp=240.0 pwm=0.418
Stats 798522.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6608846 bytes_read=1416713 bytes_retransmit=9 bytes_invalid=0 send_seq=125889 receive_seq=125889 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=2537 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.359 sd_pos=1100069 sysload=0.27 cputime=195.269 memavail=7293752 print_time=3748.176 buffer_time=2.433 print_stall=0 extruder: target=240 temp=240.0 pwm=0.419
Stats 798523.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6613617 bytes_read=1417426 bytes_retransmit=9 bytes_invalid=0 send_seq=125973 receive_seq=125973 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=80.1 pwm=0.409 sd_pos=1100526 sysload=0.27 cputime=195.356 memavail=7292392 print_time=3749.144 buffer_time=2.400 print_stall=0 extruder: target=240 temp=239.9 pwm=0.441
Stats 798524.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6615466 bytes_read=1417918 bytes_retransmit=9 bytes_invalid=0 send_seq=126013 receive_seq=126013 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=1100908 sysload=0.27 cputime=195.417 memavail=7293772 print_time=3749.962 buffer_time=2.217 print_stall=0 extruder: target=240 temp=239.8 pwm=0.467
Stats 798525.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6619125 bytes_read=1418541 bytes_retransmit=9 bytes_invalid=0 send_seq=126082 receive_seq=126082 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1101578 sysload=0.25 cputime=195.495 memavail=7293772 print_time=3751.155 buffer_time=2.410 print_stall=0 extruder: target=240 temp=240.1 pwm=0.363
Stats 798526.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6621946 bytes_read=1419114 bytes_retransmit=9 bytes_invalid=0 send_seq=126138 receive_seq=126138 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.1 pwm=0.400 sd_pos=1102553 sysload=0.25 cputime=195.561 memavail=7293548 print_time=3751.819 buffer_time=2.074 print_stall=0 extruder: target=240 temp=239.9 pwm=0.476
Stats 798527.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6627126 bytes_read=1419892 bytes_retransmit=9 bytes_invalid=0 send_seq=126232 receive_seq=126232 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.1 pwm=0.400 sd_pos=1103319 sysload=0.25 cputime=195.634 memavail=7293548 print_time=3753.075 buffer_time=2.329 print_stall=0 extruder: target=240 temp=239.9 pwm=0.480
Stats 798528.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6628955 bytes_read=1420365 bytes_retransmit=9 bytes_invalid=0 send_seq=126271 receive_seq=126271 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.1 pwm=0.368 sd_pos=1103750 sysload=0.25 cputime=195.689 memavail=7293300 print_time=3753.772 buffer_time=2.026 print_stall=0 extruder: target=240 temp=239.9 pwm=0.480
Stats 798529.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6632279 bytes_read=1420973 bytes_retransmit=9 bytes_invalid=0 send_seq=126334 receive_seq=126334 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.1 pwm=0.373 sd_pos=1104651 sysload=0.25 cputime=195.767 memavail=7293300 print_time=3754.871 buffer_time=2.123 print_stall=0 extruder: target=240 temp=240.1 pwm=0.362
Stats 798530.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6637562 bytes_read=1421755 bytes_retransmit=9 bytes_invalid=0 send_seq=126432 receive_seq=126432 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.1 pwm=0.450 sd_pos=1105766 sysload=0.23 cputime=195.850 memavail=7293300 print_time=3756.324 buffer_time=2.576 print_stall=0 extruder: target=240 temp=240.1 pwm=0.444
Stats 798531.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6640524 bytes_read=1422313 bytes_retransmit=9 bytes_invalid=0 send_seq=126488 receive_seq=126488 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.1 pwm=0.450 sd_pos=1106088 sysload=0.23 cputime=195.906 memavail=7293300 print_time=3757.022 buffer_time=2.273 print_stall=0 extruder: target=240 temp=239.9 pwm=0.540
Stats 798532.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6644520 bytes_read=1423002 bytes_retransmit=9 bytes_invalid=0 send_seq=126564 receive_seq=126564 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=1122 freq=119992757 heater_bed: target=80 temp=80.1 pwm=0.412 sd_pos=1107115 sysload=0.23 cputime=195.991 memavail=7293300 print_time=3758.369 buffer_time=2.619 print_stall=0 extruder: target=240 temp=240.3 pwm=0.324
Stats 798533.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6648965 bytes_read=1423694 bytes_retransmit=9 bytes_invalid=0 send_seq=126644 receive_seq=126644 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 upcoming_bytes=41 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.520 sd_pos=1107765 sysload=0.23 cputime=196.097 memavail=7291008 print_time=3759.271 buffer_time=2.521 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 798534.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6651390 bytes_read=1424214 bytes_retransmit=9 bytes_invalid=0 send_seq=126693 receive_seq=126693 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=80.0 pwm=0.584 sd_pos=1108629 sysload=0.23 cputime=196.164 memavail=7291772 print_time=3759.899 buffer_time=2.148 print_stall=0 extruder: target=240 temp=240.1 pwm=0.465
Stats 798535.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6654406 bytes_read=1424794 bytes_retransmit=9 bytes_invalid=0 send_seq=126752 receive_seq=126752 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=79.9 pwm=0.587 sd_pos=1109459 sysload=0.21 cputime=196.226 memavail=7291772 print_time=3760.785 buffer_time=2.033 print_stall=0 extruder: target=240 temp=239.9 pwm=0.465
Stats 798536.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6660079 bytes_read=1425585 bytes_retransmit=9 bytes_invalid=0 send_seq=126853 receive_seq=126853 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=419 freq=119992747 heater_bed: target=80 temp=79.9 pwm=0.587 sd_pos=1110280 sysload=0.21 cputime=196.306 memavail=7291772 print_time=3762.333 buffer_time=2.581 print_stall=0 extruder: target=240 temp=240.0 pwm=0.475
Stats 798537.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6662127 bytes_read=1426084 bytes_retransmit=9 bytes_invalid=0 send_seq=126894 receive_seq=126894 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=79.9 pwm=0.522 sd_pos=1110564 sysload=0.21 cputime=196.371 memavail=7290860 print_time=3762.824 buffer_time=2.071 print_stall=0 extruder: target=240 temp=240.1 pwm=0.400
Stats 798538.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6665543 bytes_read=1426707 bytes_retransmit=9 bytes_invalid=0 send_seq=126960 receive_seq=126960 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=79.9 pwm=0.512 sd_pos=1111447 sysload=0.21 cputime=196.474 memavail=7289244 print_time=3763.935 buffer_time=2.183 print_stall=0 extruder: target=240 temp=239.9 pwm=0.472
Stats 798539.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6667983 bytes_read=1427244 bytes_retransmit=9 bytes_invalid=0 send_seq=127009 receive_seq=127009 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=79.9 pwm=0.527 sd_pos=1111895 sysload=0.21 cputime=196.541 memavail=7289244 print_time=3764.943 buffer_time=2.190 print_stall=0 extruder: target=240 temp=239.8 pwm=0.536
Stats 798540.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6672001 bytes_read=1427902 bytes_retransmit=9 bytes_invalid=0 send_seq=127085 receive_seq=127085 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=79.9 pwm=0.410 sd_pos=1112506 sysload=0.19 cputime=196.614 memavail=7289244 print_time=3765.920 buffer_time=2.167 print_stall=0 extruder: target=240 temp=240.0 pwm=0.428
Stats 798541.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6675891 bytes_read=1428565 bytes_retransmit=9 bytes_invalid=0 send_seq=127159 receive_seq=127159 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=79.9 pwm=0.482 sd_pos=1114086 sysload=0.19 cputime=196.692 memavail=7289020 print_time=3766.889 buffer_time=2.135 print_stall=0 extruder: target=240 temp=240.1 pwm=0.428
Stats 798542.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6677728 bytes_read=1429068 bytes_retransmit=9 bytes_invalid=0 send_seq=127198 receive_seq=127198 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=79.9 pwm=0.400 sd_pos=1114140 sysload=0.19 cputime=196.753 memavail=7289020 print_time=3768.093 buffer_time=2.339 print_stall=0 extruder: target=240 temp=240.0 pwm=0.480
Stats 798543.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6678934 bytes_read=1429491 bytes_retransmit=9 bytes_invalid=0 send_seq=127227 receive_seq=127227 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=79.9 pwm=0.400 sd_pos=1114279 sysload=0.19 cputime=196.814 memavail=7289020 print_time=3768.935 buffer_time=2.179 print_stall=0 extruder: target=240 temp=240.2 pwm=0.420
Stats 798544.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6679289 bytes_read=1429854 bytes_retransmit=9 bytes_invalid=0 send_seq=127241 receive_seq=127241 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=79.9 pwm=0.400 sd_pos=1114364 sysload=0.19 cputime=196.868 memavail=7288768 print_time=3769.665 buffer_time=1.908 print_stall=0 extruder: target=240 temp=240.0 pwm=0.494
Stats 798545.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6681035 bytes_read=1430336 bytes_retransmit=9 bytes_invalid=0 send_seq=127279 receive_seq=127279 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.443 sd_pos=1114514 sysload=0.34 cputime=196.930 memavail=7289012 print_time=3771.109 buffer_time=2.352 print_stall=0 extruder: target=240 temp=239.8 pwm=0.495
Stats 798546.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6684554 bytes_read=1430954 bytes_retransmit=9 bytes_invalid=0 send_seq=127347 receive_seq=127347 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992801 heater_bed: target=80 temp=80.0 pwm=0.388 sd_pos=1114971 sysload=0.34 cputime=196.999 memavail=7289016 print_time=3771.880 buffer_time=2.123 print_stall=0 extruder: target=240 temp=239.9 pwm=0.433
Stats 798547.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6689640 bytes_read=1431722 bytes_retransmit=9 bytes_invalid=0 send_seq=127439 receive_seq=127439 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=1383 freq=119992798 heater_bed: target=80 temp=80.0 pwm=0.388 sd_pos=1115856 sysload=0.34 cputime=197.074 memavail=7289016 print_time=3773.194 buffer_time=2.436 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 798548.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6693357 bytes_read=1432339 bytes_retransmit=9 bytes_invalid=0 send_seq=127504 receive_seq=127504 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1210 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=1116378 sysload=0.34 cputime=197.154 memavail=7289016 print_time=3773.830 buffer_time=2.073 print_stall=0 extruder: target=240 temp=239.8 pwm=0.533
Stats 798549.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6698412 bytes_read=1433052 bytes_retransmit=9 bytes_invalid=0 send_seq=127591 receive_seq=127591 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=3013 freq=119992848 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=1117539 sysload=0.34 cputime=197.260 memavail=7289016 print_time=3775.151 buffer_time=2.393 print_stall=0 extruder: target=240 temp=240.2 pwm=0.337
Stats 798550.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6703749 bytes_read=1433819 bytes_retransmit=9 bytes_invalid=0 send_seq=127683 receive_seq=127683 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=790 freq=119992836 heater_bed: target=80 temp=80.1 pwm=0.383 sd_pos=1117834 sysload=0.31 cputime=197.354 memavail=7289016 print_time=3776.262 buffer_time=2.503 print_stall=0 extruder: target=240 temp=240.0 pwm=0.468
Stats 798551.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6706546 bytes_read=1434362 bytes_retransmit=9 bytes_invalid=0 send_seq=127736 receive_seq=127736 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=80.1 pwm=0.410 sd_pos=1118369 sysload=0.31 cputime=197.423 memavail=7289016 print_time=3776.881 buffer_time=2.121 print_stall=0 extruder: target=240 temp=239.9 pwm=0.468
Stats 798552.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6708819 bytes_read=1434876 bytes_retransmit=9 bytes_invalid=0 send_seq=127780 receive_seq=127780 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=80.1 pwm=0.500 sd_pos=1118837 sysload=0.31 cputime=197.491 memavail=7289016 print_time=3777.970 buffer_time=2.210 print_stall=0 extruder: target=240 temp=240.2 pwm=0.348
Stats 798553.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6714411 bytes_read=1435693 bytes_retransmit=9 bytes_invalid=0 send_seq=127882 receive_seq=127882 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=80.1 pwm=0.385 sd_pos=1119845 sysload=0.31 cputime=197.586 memavail=7289016 print_time=3779.499 buffer_time=2.738 print_stall=0 extruder: target=240 temp=239.8 pwm=0.564
Stats 798554.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6717516 bytes_read=1436276 bytes_retransmit=9 bytes_invalid=0 send_seq=127943 receive_seq=127943 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=80.1 pwm=0.454 sd_pos=1120449 sysload=0.31 cputime=197.664 memavail=7289016 print_time=3780.272 buffer_time=2.511 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 798555.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6720086 bytes_read=1436749 bytes_retransmit=9 bytes_invalid=0 send_seq=127994 receive_seq=127982 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=439 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.1 pwm=0.416 sd_pos=1121050 sysload=0.29 cputime=197.728 memavail=7288792 print_time=3781.244 buffer_time=2.482 print_stall=0 extruder: target=240 temp=239.9 pwm=0.481
Stats 798556.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6722746 bytes_read=1437381 bytes_retransmit=9 bytes_invalid=0 send_seq=128047 receive_seq=128047 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=1121762 sysload=0.29 cputime=197.799 memavail=7288792 print_time=3781.940 buffer_time=2.178 print_stall=0 extruder: target=240 temp=240.0 pwm=0.408
Stats 798557.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6725729 bytes_read=1437965 bytes_retransmit=9 bytes_invalid=0 send_seq=128105 receive_seq=128105 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992858 heater_bed: target=80 temp=80.1 pwm=0.433 sd_pos=1122265 sysload=0.29 cputime=197.868 memavail=7288792 print_time=3782.984 buffer_time=2.220 print_stall=0 extruder: target=240 temp=240.1 pwm=0.450
Stats 798558.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6729930 bytes_read=1438638 bytes_retransmit=9 bytes_invalid=0 send_seq=128184 receive_seq=128184 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=80 temp=80.1 pwm=0.334 sd_pos=1122956 sysload=0.29 cputime=197.940 memavail=7288796 print_time=3784.030 buffer_time=2.265 print_stall=0 extruder: target=240 temp=240.1 pwm=0.450
Stats 798559.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6733261 bytes_read=1439270 bytes_retransmit=9 bytes_invalid=0 send_seq=128249 receive_seq=128249 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.1 pwm=0.464 sd_pos=1123280 sysload=0.29 cputime=198.015 memavail=7288796 print_time=3784.826 buffer_time=2.060 print_stall=0 extruder: target=240 temp=239.8 pwm=0.561
Stats 798560.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6738245 bytes_read=1439998 bytes_retransmit=9 bytes_invalid=0 send_seq=128339 receive_seq=128339 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=217 freq=119992826 heater_bed: target=80 temp=80.1 pwm=0.519 sd_pos=1124470 sysload=0.34 cputime=198.108 memavail=7288796 print_time=3786.074 buffer_time=2.308 print_stall=0 extruder: target=240 temp=239.9 pwm=0.476
Stats 798561.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6741745 bytes_read=1440591 bytes_retransmit=9 bytes_invalid=0 send_seq=128402 receive_seq=128402 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992825 heater_bed: target=80 temp=80.0 pwm=0.519 sd_pos=1125154 sysload=0.34 cputime=198.183 memavail=7288796 print_time=3786.997 buffer_time=2.229 print_stall=0 extruder: target=240 temp=239.9 pwm=0.520
Stats 798562.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6745064 bytes_read=1441234 bytes_retransmit=9 bytes_invalid=0 send_seq=128466 receive_seq=128466 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=80.0 pwm=0.575 sd_pos=1126161 sysload=0.34 cputime=198.254 memavail=7288796 print_time=3787.970 buffer_time=2.201 print_stall=0 extruder: target=240 temp=239.9 pwm=0.446
Stats 798563.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6749890 bytes_read=1441947 bytes_retransmit=9 bytes_invalid=0 send_seq=128553 receive_seq=128553 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992810 heater_bed: target=80 temp=80.0 pwm=0.597 sd_pos=1127133 sysload=0.34 cputime=198.337 memavail=7288796 print_time=3789.366 buffer_time=2.597 print_stall=0 extruder: target=240 temp=240.2 pwm=0.354
Stats 798564.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6752696 bytes_read=1442510 bytes_retransmit=9 bytes_invalid=0 send_seq=128611 receive_seq=128610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992801 heater_bed: target=80 temp=79.9 pwm=0.577 sd_pos=1127444 sysload=0.34 cputime=198.399 memavail=7288796 print_time=3789.980 buffer_time=2.210 print_stall=0 extruder: target=240 temp=239.9 pwm=0.526
Stats 798565.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6756262 bytes_read=1443178 bytes_retransmit=9 bytes_invalid=0 send_seq=128680 receive_seq=128680 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=79.9 pwm=0.586 sd_pos=1128208 sysload=0.31 cputime=198.470 memavail=7288796 print_time=3791.289 buffer_time=2.519 print_stall=0 extruder: target=240 temp=240.1 pwm=0.475
Stats 798566.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6758476 bytes_read=1443681 bytes_retransmit=9 bytes_invalid=0 send_seq=128725 receive_seq=128725 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=79.9 pwm=0.586 sd_pos=1128773 sysload=0.31 cputime=198.532 memavail=7288796 print_time=3791.923 buffer_time=2.151 print_stall=0 extruder: target=240 temp=240.3 pwm=0.335
Stats 798567.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6763685 bytes_read=1444455 bytes_retransmit=9 bytes_invalid=0 send_seq=128821 receive_seq=128821 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=226 freq=119992774 heater_bed: target=80 temp=79.9 pwm=0.561 sd_pos=1129750 sysload=0.31 cputime=198.611 memavail=7288796 print_time=3793.555 buffer_time=2.782 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 798568.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6766527 bytes_read=1445047 bytes_retransmit=9 bytes_invalid=0 send_seq=128878 receive_seq=128878 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=79.9 pwm=0.506 sd_pos=1131077 sysload=0.31 cputime=198.689 memavail=7288800 print_time=3794.124 buffer_time=2.351 print_stall=0 extruder: target=240 temp=240.1 pwm=0.424
Stats 798569.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6768401 bytes_read=1445530 bytes_retransmit=9 bytes_invalid=0 send_seq=128919 receive_seq=128919 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=79.9 pwm=0.452 sd_pos=1131212 sysload=0.31 cputime=198.747 memavail=7288800 print_time=3794.954 buffer_time=2.180 print_stall=0 extruder: target=240 temp=240.0 pwm=0.445
Stats 798570.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6769576 bytes_read=1445948 bytes_retransmit=9 bytes_invalid=0 send_seq=128948 receive_seq=128948 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=79.9 pwm=0.399 sd_pos=1131267 sysload=0.29 cputime=198.808 memavail=7288800 print_time=3795.858 buffer_time=2.083 print_stall=0 extruder: target=240 temp=240.0 pwm=0.445
Stats 798571.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6770934 bytes_read=1446401 bytes_retransmit=9 bytes_invalid=0 send_seq=128979 receive_seq=128979 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=79.9 pwm=0.457 sd_pos=1131434 sysload=0.29 cputime=198.871 memavail=7288800 print_time=3797.207 buffer_time=2.432 print_stall=0 extruder: target=240 temp=239.9 pwm=0.497
Stats 798572.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6772123 bytes_read=1446838 bytes_retransmit=9 bytes_invalid=0 send_seq=129008 receive_seq=129008 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=80.0 pwm=0.368 sd_pos=1131490 sysload=0.29 cputime=198.926 memavail=7288800 print_time=3797.797 buffer_time=2.021 print_stall=0 extruder: target=240 temp=240.3 pwm=0.327
Stats 798573.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6776268 bytes_read=1447511 bytes_retransmit=9 bytes_invalid=0 send_seq=129087 receive_seq=129087 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.379 sd_pos=1132098 sysload=0.29 cputime=198.994 memavail=7288800 print_time=3799.440 buffer_time=2.663 print_stall=0 extruder: target=240 temp=240.1 pwm=0.458
Stats 798574.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6779612 bytes_read=1448143 bytes_retransmit=9 bytes_invalid=0 send_seq=129152 receive_seq=129152 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.386 sd_pos=1132739 sysload=0.29 cputime=199.077 memavail=7288948 print_time=3800.024 buffer_time=2.246 print_stall=0 extruder: target=240 temp=240.0 pwm=0.478
Stats 798575.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6782783 bytes_read=1448716 bytes_retransmit=9 bytes_invalid=0 send_seq=129211 receive_seq=129211 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=2943 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.386 sd_pos=1133979 sysload=0.27 cputime=199.131 memavail=7289020 print_time=3801.246 buffer_time=2.467 print_stall=0 extruder: target=240 temp=240.1 pwm=0.368
Stats 798576.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6787717 bytes_read=1449434 bytes_retransmit=9 bytes_invalid=0 send_seq=129296 receive_seq=129296 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=1290 freq=119992755 heater_bed: target=80 temp=80.1 pwm=0.304 sd_pos=1134505 sysload=0.27 cputime=199.205 memavail=7289020 print_time=3801.812 buffer_time=2.032 print_stall=0 extruder: target=240 temp=240.0 pwm=0.457
Stats 798577.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6792937 bytes_read=1450192 bytes_retransmit=9 bytes_invalid=0 send_seq=129386 receive_seq=129386 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1681 freq=119992748 heater_bed: target=80 temp=80.1 pwm=0.365 sd_pos=1135387 sysload=0.27 cputime=199.304 memavail=7289024 print_time=3802.919 buffer_time=2.139 print_stall=0 extruder: target=240 temp=239.8 pwm=0.457
Stats 798578.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6797199 bytes_read=1450845 bytes_retransmit=9 bytes_invalid=0 send_seq=129461 receive_seq=129461 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=80.1 pwm=0.420 sd_pos=1135639 sysload=0.27 cputime=199.381 memavail=7289280 print_time=3803.875 buffer_time=2.094 print_stall=0 extruder: target=240 temp=239.9 pwm=0.485
Stats 798579.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6800041 bytes_read=1451408 bytes_retransmit=9 bytes_invalid=0 send_seq=129515 receive_seq=129515 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.1 pwm=0.491 sd_pos=1136600 sysload=0.27 cputime=199.440 memavail=7289280 print_time=3805.102 buffer_time=2.321 print_stall=0 extruder: target=240 temp=240.0 pwm=0.477
Stats 798580.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6803655 bytes_read=1452030 bytes_retransmit=9 bytes_invalid=0 send_seq=129581 receive_seq=129581 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.1 pwm=0.421 sd_pos=1137274 sysload=0.24 cputime=199.506 memavail=7292008 print_time=3806.306 buffer_time=2.524 print_stall=0 extruder: target=240 temp=239.8 pwm=0.477
Stats 798581.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6806262 bytes_read=1452568 bytes_retransmit=9 bytes_invalid=0 send_seq=129633 receive_seq=129633 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=80.1 pwm=0.421 sd_pos=1137843 sysload=0.24 cputime=199.564 memavail=7292008 print_time=3806.973 buffer_time=2.190 print_stall=0 extruder: target=240 temp=239.8 pwm=0.461
Stats 798582.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6810449 bytes_read=1453247 bytes_retransmit=9 bytes_invalid=0 send_seq=129707 receive_seq=129707 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.1 pwm=0.421 sd_pos=1138365 sysload=0.24 cputime=199.633 memavail=7292008 print_time=3807.981 buffer_time=2.198 print_stall=0 extruder: target=240 temp=240.2 pwm=0.317
Stats 798583.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6813929 bytes_read=1453884 bytes_retransmit=9 bytes_invalid=0 send_seq=129776 receive_seq=129776 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.1 pwm=0.454 sd_pos=1139652 sysload=0.24 cputime=199.707 memavail=7292008 print_time=3809.089 buffer_time=2.305 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 798584.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6817274 bytes_read=1454482 bytes_retransmit=9 bytes_invalid=0 send_seq=129840 receive_seq=129840 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.1 pwm=0.392 sd_pos=1140529 sysload=0.24 cputime=199.769 memavail=7292008 print_time=3810.269 buffer_time=2.484 print_stall=0 extruder: target=240 temp=240.2 pwm=0.354
Stats 798585.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6822243 bytes_read=1455230 bytes_retransmit=9 bytes_invalid=0 send_seq=129931 receive_seq=129931 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.1 pwm=0.442 sd_pos=1141190 sysload=0.22 cputime=199.839 memavail=7292008 print_time=3811.600 buffer_time=2.814 print_stall=0 extruder: target=240 temp=240.2 pwm=0.374
Stats 798586.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6825395 bytes_read=1455827 bytes_retransmit=9 bytes_invalid=0 send_seq=129992 receive_seq=129992 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=17 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=1141855 sysload=0.22 cputime=199.917 memavail=7291756 print_time=3812.311 buffer_time=2.525 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 798587.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6828506 bytes_read=1456416 bytes_retransmit=9 bytes_invalid=0 send_seq=130051 receive_seq=130051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.497 sd_pos=1142180 sysload=0.22 cputime=199.992 memavail=7291756 print_time=3813.108 buffer_time=2.321 print_stall=0 extruder: target=240 temp=240.2 pwm=0.397
Stats 798588.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6831212 bytes_read=1456974 bytes_retransmit=9 bytes_invalid=0 send_seq=130104 receive_seq=130104 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.535 sd_pos=1142711 sysload=0.22 cputime=200.059 memavail=7291760 print_time=3813.802 buffer_time=2.014 print_stall=0 extruder: target=240 temp=239.6 pwm=0.641
Stats 798589.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6834803 bytes_read=1457606 bytes_retransmit=9 bytes_invalid=0 send_seq=130172 receive_seq=130172 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=1143697 sysload=0.22 cputime=200.138 memavail=7291760 print_time=3814.791 buffer_time=2.002 print_stall=0 extruder: target=240 temp=239.8 pwm=0.537
Stats 798590.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6838712 bytes_read=1458249 bytes_retransmit=9 bytes_invalid=0 send_seq=130245 receive_seq=130245 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.520 sd_pos=1145020 sysload=0.21 cputime=200.218 memavail=7291760 print_time=3815.912 buffer_time=2.123 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 798591.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6842718 bytes_read=1458902 bytes_retransmit=9 bytes_invalid=0 send_seq=130317 receive_seq=130317 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=79.9 pwm=0.551 sd_pos=1145705 sysload=0.21 cputime=200.298 memavail=7291760 print_time=3816.846 buffer_time=2.057 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 798592.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6846641 bytes_read=1459575 bytes_retransmit=9 bytes_invalid=0 send_seq=130390 receive_seq=130390 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=79.9 pwm=0.551 sd_pos=1146244 sysload=0.21 cputime=200.369 memavail=7291760 print_time=3817.900 buffer_time=2.109 print_stall=0 extruder: target=240 temp=240.3 pwm=0.408
Stats 798593.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6849968 bytes_read=1460173 bytes_retransmit=9 bytes_invalid=0 send_seq=130454 receive_seq=130454 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=79.9 pwm=0.469 sd_pos=1147156 sysload=0.21 cputime=200.446 memavail=7291760 print_time=3818.991 buffer_time=2.200 print_stall=0 extruder: target=240 temp=240.1 pwm=0.399
Stats 798594.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6852324 bytes_read=1460701 bytes_retransmit=9 bytes_invalid=0 send_seq=130501 receive_seq=130501 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=79.9 pwm=0.532 sd_pos=1147604 sysload=0.21 cputime=200.502 memavail=7291760 print_time=3819.970 buffer_time=2.178 print_stall=0 extruder: target=240 temp=240.0 pwm=0.475
Stats 798595.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6858586 bytes_read=1461548 bytes_retransmit=9 bytes_invalid=0 send_seq=130612 receive_seq=130612 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=365 freq=119992724 heater_bed: target=80 temp=79.9 pwm=0.391 sd_pos=1149162 sysload=0.19 cputime=200.593 memavail=7291760 print_time=3821.548 buffer_time=2.755 print_stall=0 extruder: target=240 temp=240.1 pwm=0.382
Stats 798596.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6860286 bytes_read=1462011 bytes_retransmit=9 bytes_invalid=0 send_seq=130649 receive_seq=130649 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=79.9 pwm=0.448 sd_pos=1149270 sysload=0.19 cputime=200.653 memavail=7291760 print_time=3821.909 buffer_time=2.115 print_stall=0 extruder: target=240 temp=239.9 pwm=0.477
Stats 798597.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6861460 bytes_read=1462465 bytes_retransmit=9 bytes_invalid=0 send_seq=130678 receive_seq=130678 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=79.9 pwm=0.392 sd_pos=1149324 sysload=0.19 cputime=200.710 memavail=7291760 print_time=3822.819 buffer_time=2.024 print_stall=0 extruder: target=240 temp=240.1 pwm=0.375
Stats 798598.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6863179 bytes_read=1462942 bytes_retransmit=9 bytes_invalid=0 send_seq=130715 receive_seq=130715 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=79.9 pwm=0.392 sd_pos=1149475 sysload=0.19 cputime=200.768 memavail=7291284 print_time=3823.905 buffer_time=2.109 print_stall=0 extruder: target=240 temp=239.8 pwm=0.549
Stats 798599.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6864023 bytes_read=1463340 bytes_retransmit=9 bytes_invalid=0 send_seq=130739 receive_seq=130739 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=79.9 pwm=0.458 sd_pos=1149588 sysload=0.19 cputime=200.817 memavail=7291284 print_time=3824.902 buffer_time=2.106 print_stall=0 extruder: target=240 temp=239.9 pwm=0.516
Stats 798600.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6865296 bytes_read=1463783 bytes_retransmit=9 bytes_invalid=0 send_seq=130769 receive_seq=130769 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=80.0 pwm=0.376 sd_pos=1149722 sysload=0.17 cputime=200.876 memavail=7291284 print_time=3826.079 buffer_time=2.282 print_stall=0 extruder: target=240 temp=239.9 pwm=0.470
Stats 798601.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6868772 bytes_read=1464405 bytes_retransmit=9 bytes_invalid=0 send_seq=130835 receive_seq=130835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992808 heater_bed: target=80 temp=80.0 pwm=0.376 sd_pos=1150267 sysload=0.17 cputime=200.950 memavail=7291284 print_time=3826.872 buffer_time=2.074 print_stall=0 extruder: target=240 temp=240.0 pwm=0.432
Stats 798602.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6874080 bytes_read=1465178 bytes_retransmit=9 bytes_invalid=0 send_seq=130931 receive_seq=130931 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1000 freq=119992801 heater_bed: target=80 temp=80.0 pwm=0.376 sd_pos=1151821 sysload=0.17 cputime=201.042 memavail=7291284 print_time=3828.097 buffer_time=2.298 print_stall=0 extruder: target=240 temp=239.8 pwm=0.549
Stats 798603.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6877914 bytes_read=1465811 bytes_retransmit=9 bytes_invalid=0 send_seq=130999 receive_seq=130999 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=3263 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.330 sd_pos=1153200 sysload=0.17 cputime=201.150 memavail=7291284 print_time=3829.240 buffer_time=2.441 print_stall=0 extruder: target=240 temp=240.0 pwm=0.452
Stats 798604.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6883172 bytes_read=1466558 bytes_retransmit=9 bytes_invalid=0 send_seq=131090 receive_seq=131090 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1627 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=1153777 sysload=0.17 cputime=201.246 memavail=7291284 print_time=3829.877 buffer_time=2.077 print_stall=0 extruder: target=240 temp=240.0 pwm=0.425
Stats 798605.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6888528 bytes_read=1467296 bytes_retransmit=9 bytes_invalid=0 send_seq=131182 receive_seq=131182 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=393 freq=119992805 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=1154304 sysload=0.24 cputime=201.362 memavail=7291276 print_time=3830.926 buffer_time=2.125 print_stall=0 extruder: target=240 temp=239.8 pwm=0.488
Stats 798606.3: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6891353 bytes_read=1467867 bytes_retransmit=9 bytes_invalid=0 send_seq=131236 receive_seq=131236 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.1 pwm=0.405 sd_pos=1155091 sysload=0.24 cputime=201.427 memavail=7291276 print_time=3831.964 buffer_time=2.157 print_stall=0 extruder: target=240 temp=239.9 pwm=0.497
Stats 798607.3: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6894515 bytes_read=1468456 bytes_retransmit=9 bytes_invalid=0 send_seq=131297 receive_seq=131297 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=1156000 sysload=0.24 cputime=201.488 memavail=7291052 print_time=3833.190 buffer_time=2.381 print_stall=0 extruder: target=240 temp=239.7 pwm=0.589
Stats 798608.3: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6898530 bytes_read=1469106 bytes_retransmit=9 bytes_invalid=0 send_seq=131372 receive_seq=131372 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=1156654 sysload=0.24 cputime=201.549 memavail=7291052 print_time=3834.204 buffer_time=2.394 print_stall=0 extruder: target=240 temp=239.8 pwm=0.471
Stats 798609.3: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6901418 bytes_read=1469694 bytes_retransmit=9 bytes_invalid=0 send_seq=131431 receive_seq=131431 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.498 sd_pos=1157084 sysload=0.24 cputime=201.601 memavail=7291052 print_time=3834.949 buffer_time=2.138 print_stall=0 extruder: target=240 temp=239.8 pwm=0.499
Stats 798610.3: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6904208 bytes_read=1470266 bytes_retransmit=9 bytes_invalid=0 send_seq=131487 receive_seq=131487 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.1 pwm=0.376 sd_pos=1157648 sysload=0.22 cputime=201.660 memavail=7291052 print_time=3835.865 buffer_time=2.054 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 798611.3: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6907400 bytes_read=1470854 bytes_retransmit=9 bytes_invalid=0 send_seq=131549 receive_seq=131549 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.1 pwm=0.454 sd_pos=1158503 sysload=0.22 cputime=201.726 memavail=7291052 print_time=3836.952 buffer_time=2.139 print_stall=0 extruder: target=240 temp=240.2 pwm=0.378
Stats 798612.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6912113 bytes_read=1471598 bytes_retransmit=9 bytes_invalid=0 send_seq=131636 receive_seq=131636 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.1 pwm=0.427 sd_pos=1159466 sysload=0.22 cputime=201.801 memavail=7291052 print_time=3838.357 buffer_time=2.543 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 798613.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6915260 bytes_read=1472205 bytes_retransmit=9 bytes_invalid=0 send_seq=131699 receive_seq=131699 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992775 heater_bed: target=80 temp=80.1 pwm=0.374 sd_pos=1160128 sysload=0.22 cputime=201.864 memavail=7291052 print_time=3839.048 buffer_time=2.234 print_stall=0 extruder: target=240 temp=240.0 pwm=0.484
Stats 798614.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6919704 bytes_read=1472893 bytes_retransmit=9 bytes_invalid=0 send_seq=131781 receive_seq=131781 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=677 freq=119992772 heater_bed: target=80 temp=80.1 pwm=0.465 sd_pos=1160925 sysload=0.22 cputime=201.948 memavail=7291052 print_time=3840.403 buffer_time=2.589 print_stall=0 extruder: target=240 temp=240.2 pwm=0.383
Stats 798615.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6923200 bytes_read=1473506 bytes_retransmit=9 bytes_invalid=0 send_seq=131845 receive_seq=131845 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=1161490 sysload=0.20 cputime=202.021 memavail=7291052 print_time=3841.236 buffer_time=2.421 print_stall=0 extruder: target=240 temp=239.9 pwm=0.510
Stats 798616.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6925481 bytes_read=1474023 bytes_retransmit=9 bytes_invalid=0 send_seq=131890 receive_seq=131890 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=80.0 pwm=0.497 sd_pos=1162038 sysload=0.20 cputime=202.075 memavail=7291052 print_time=3841.903 buffer_time=2.088 print_stall=0 extruder: target=240 temp=240.1 pwm=0.416
Stats 798617.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6931084 bytes_read=1474817 bytes_retransmit=9 bytes_invalid=0 send_seq=131992 receive_seq=131990 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=810 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=1163789 sysload=0.20 cputime=202.150 memavail=7290828 print_time=3843.644 buffer_time=2.820 print_stall=0 extruder: target=240 temp=239.8 pwm=0.545
Stats 798618.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6934179 bytes_read=1475415 bytes_retransmit=9 bytes_invalid=0 send_seq=132051 receive_seq=132051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=79.9 pwm=0.508 sd_pos=1164128 sysload=0.20 cputime=202.220 memavail=7290356 print_time=3844.191 buffer_time=2.367 print_stall=0 extruder: target=240 temp=240.1 pwm=0.372
Stats 798619.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6937362 bytes_read=1476007 bytes_retransmit=9 bytes_invalid=0 send_seq=132111 receive_seq=132111 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=79.9 pwm=0.581 sd_pos=1164748 sysload=0.20 cputime=202.285 memavail=7290356 print_time=3845.343 buffer_time=2.518 print_stall=0 extruder: target=240 temp=240.0 pwm=0.436
Stats 798620.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6939608 bytes_read=1476520 bytes_retransmit=9 bytes_invalid=0 send_seq=132158 receive_seq=132158 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=80 temp=79.9 pwm=0.514 sd_pos=1165298 sysload=0.27 cputime=202.344 memavail=7290356 print_time=3845.966 buffer_time=2.140 print_stall=0 extruder: target=240 temp=240.0 pwm=0.500
Stats 798621.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=6944786 bytes_read=1477278 bytes_retransmit=9 bytes_invalid=0 send_seq=132251 receive_seq=132251 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=16 freq=119992742 heater_bed: target=80 temp=79.9 pwm=0.461 sd_pos=1166246 sysload=0.27 cputime=202.413 memavail=7290356 print_time=3847.564 buffer_time=2.737 print_stall=0 extruder: target=240 temp=239.7 pwm=0.593
Stats 798622.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=6947163 bytes_read=1477826 bytes_retransmit=9 bytes_invalid=0 send_seq=132299 receive_seq=132299 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=79.9 pwm=0.468 sd_pos=1167500 sysload=0.27 cputime=202.480 memavail=7290356 print_time=3848.084 buffer_time=2.257 print_stall=0 extruder: target=240 temp=239.8 pwm=0.525
Stats 798623.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=6949007 bytes_read=1478299 bytes_retransmit=9 bytes_invalid=0 send_seq=132338 receive_seq=132338 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=79.9 pwm=0.468 sd_pos=1167635 sysload=0.27 cputime=202.537 memavail=7290356 print_time=3848.915 buffer_time=2.087 print_stall=0 extruder: target=240 temp=240.1 pwm=0.355
Stats 798624.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=6950701 bytes_read=1478777 bytes_retransmit=9 bytes_invalid=0 send_seq=132375 receive_seq=132375 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=79.9 pwm=0.364 sd_pos=1167800 sysload=0.27 cputime=202.591 memavail=7290360 print_time=3850.278 buffer_time=2.450 print_stall=0 extruder: target=240 temp=240.3 pwm=0.309
Stats 798625.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=6951616 bytes_read=1479215 bytes_retransmit=9 bytes_invalid=0 send_seq=132402 receive_seq=132402 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=79.9 pwm=0.494 sd_pos=1167857 sysload=0.25 cputime=202.641 memavail=7290360 print_time=3851.168 buffer_time=2.340 print_stall=0 extruder: target=240 temp=240.1 pwm=0.414
Stats 798626.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=6953322 bytes_read=1479673 bytes_retransmit=9 bytes_invalid=0 send_seq=132438 receive_seq=132438 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=79.9 pwm=0.440 sd_pos=1168035 sysload=0.25 cputime=202.695 memavail=7290360 print_time=3852.612 buffer_time=2.783 print_stall=0 extruder: target=240 temp=239.9 pwm=0.542
Stats 798627.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6956762 bytes_read=1480316 bytes_retransmit=9 bytes_invalid=0 send_seq=132505 receive_seq=132505 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.326 sd_pos=1168515 sysload=0.25 cputime=202.761 memavail=7290360 print_time=3853.379 buffer_time=2.549 print_stall=0 extruder: target=240 temp=239.7 pwm=0.608
Stats 798628.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6960058 bytes_read=1480933 bytes_retransmit=9 bytes_invalid=0 send_seq=132570 receive_seq=132570 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.0 pwm=0.276 sd_pos=1169227 sysload=0.25 cputime=202.821 memavail=7290644 print_time=3853.970 buffer_time=2.139 print_stall=0 extruder: target=240 temp=239.8 pwm=0.498
Stats 798629.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6963734 bytes_read=1481536 bytes_retransmit=9 bytes_invalid=0 send_seq=132635 receive_seq=132635 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2834 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=1170718 sysload=0.25 cputime=202.906 memavail=7290644 print_time=3855.236 buffer_time=2.405 print_stall=0 extruder: target=240 temp=240.1 pwm=0.374
Stats 798630.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6968785 bytes_read=1482259 bytes_retransmit=9 bytes_invalid=0 send_seq=132721 receive_seq=132721 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=4248 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.425 sd_pos=1171870 sysload=0.23 cputime=203.008 memavail=7290644 print_time=3856.485 buffer_time=2.653 print_stall=0 extruder: target=240 temp=240.2 pwm=0.322
Stats 798631.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=6974066 bytes_read=1483001 bytes_retransmit=9 bytes_invalid=0 send_seq=132811 receive_seq=132811 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1575 freq=119992758 heater_bed: target=80 temp=80.1 pwm=0.357 sd_pos=1172200 sysload=0.23 cputime=203.109 memavail=7290644 print_time=3856.942 buffer_time=2.109 print_stall=0 extruder: target=240 temp=239.8 pwm=0.568
Stats 798632.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6979120 bytes_read=1483735 bytes_retransmit=9 bytes_invalid=0 send_seq=132899 receive_seq=132899 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=80.1 pwm=0.357 sd_pos=1173202 sysload=0.23 cputime=203.208 memavail=7290644 print_time=3858.102 buffer_time=2.269 print_stall=0 extruder: target=240 temp=239.7 pwm=0.568
Stats 798633.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6981664 bytes_read=1484288 bytes_retransmit=9 bytes_invalid=0 send_seq=132951 receive_seq=132951 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=1173868 sysload=0.23 cputime=203.281 memavail=7290644 print_time=3859.223 buffer_time=2.390 print_stall=0 extruder: target=240 temp=239.9 pwm=0.454
Stats 798634.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6983725 bytes_read=1484805 bytes_retransmit=9 bytes_invalid=0 send_seq=132996 receive_seq=132996 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=80.1 pwm=0.402 sd_pos=1174555 sysload=0.23 cputime=203.347 memavail=7290644 print_time=3859.823 buffer_time=1.989 print_stall=0 extruder: target=240 temp=240.4 pwm=0.261
Stats 798635.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6987572 bytes_read=1485448 bytes_retransmit=9 bytes_invalid=0 send_seq=133069 receive_seq=133069 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=80 temp=80.1 pwm=0.296 sd_pos=1175013 sysload=0.21 cputime=203.429 memavail=7290112 print_time=3860.804 buffer_time=1.970 print_stall=0 extruder: target=240 temp=240.1 pwm=0.432
Stats 798636.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=6992577 bytes_read=1486201 bytes_retransmit=9 bytes_invalid=0 send_seq=133161 receive_seq=133161 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992724 heater_bed: target=80 temp=80.1 pwm=0.381 sd_pos=1175902 sysload=0.21 cputime=203.497 memavail=7290112 print_time=3862.121 buffer_time=2.287 print_stall=0 extruder: target=240 temp=240.1 pwm=0.447
Stats 798637.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=6995914 bytes_read=1486834 bytes_retransmit=9 bytes_invalid=0 send_seq=133226 receive_seq=133226 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=1177067 sysload=0.21 cputime=203.566 memavail=7290112 print_time=3863.240 buffer_time=2.406 print_stall=0 extruder: target=240 temp=240.0 pwm=0.507
Stats 798638.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7000069 bytes_read=1487492 bytes_retransmit=9 bytes_invalid=0 send_seq=133302 receive_seq=133302 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992720 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=1177944 sysload=0.21 cputime=203.628 memavail=7290620 print_time=3864.579 buffer_time=2.743 print_stall=0 extruder: target=240 temp=240.0 pwm=0.507
Stats 798639.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7003702 bytes_read=1488125 bytes_retransmit=9 bytes_invalid=0 send_seq=133370 receive_seq=133370 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=80.0 pwm=0.530 sd_pos=1178539 sysload=0.21 cputime=203.690 memavail=7290620 print_time=3865.424 buffer_time=2.588 print_stall=0 extruder: target=240 temp=239.8 pwm=0.507
Stats 798640.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7006205 bytes_read=1488672 bytes_retransmit=9 bytes_invalid=0 send_seq=133421 receive_seq=133421 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.443 sd_pos=1179072 sysload=0.27 cputime=203.755 memavail=7290620 print_time=3865.941 buffer_time=2.105 print_stall=0 extruder: target=240 temp=239.9 pwm=0.484
Stats 798641.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7009851 bytes_read=1489279 bytes_retransmit=9 bytes_invalid=0 send_seq=133487 receive_seq=133487 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.538 sd_pos=1179651 sysload=0.27 cputime=203.838 memavail=7290620 print_time=3866.940 buffer_time=2.103 print_stall=0 extruder: target=240 temp=240.1 pwm=0.412
Stats 798642.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7013441 bytes_read=1489919 bytes_retransmit=9 bytes_invalid=0 send_seq=133555 receive_seq=133555 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=1180617 sysload=0.27 cputime=203.911 memavail=7290620 print_time=3868.016 buffer_time=2.178 print_stall=0 extruder: target=240 temp=240.2 pwm=0.390
Stats 798643.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7016373 bytes_read=1490498 bytes_retransmit=9 bytes_invalid=0 send_seq=133614 receive_seq=133614 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=1181537 sysload=0.27 cputime=203.984 memavail=7290620 print_time=3868.915 buffer_time=2.076 print_stall=0 extruder: target=240 temp=240.2 pwm=0.417
Stats 798644.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7021135 bytes_read=1491201 bytes_retransmit=9 bytes_invalid=0 send_seq=133699 receive_seq=133699 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=79.9 pwm=0.600 sd_pos=1182460 sysload=0.27 cputime=204.063 memavail=7290620 print_time=3870.231 buffer_time=2.391 print_stall=0 extruder: target=240 temp=240.3 pwm=0.417
Stats 798645.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7024056 bytes_read=1491784 bytes_retransmit=9 bytes_invalid=0 send_seq=133757 receive_seq=133757 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=79.9 pwm=0.540 sd_pos=1183128 sysload=0.25 cputime=204.124 memavail=7290396 print_time=3870.896 buffer_time=2.054 print_stall=0 extruder: target=240 temp=240.3 pwm=0.370
Stats 798646.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7027754 bytes_read=1492426 bytes_retransmit=9 bytes_invalid=0 send_seq=133827 receive_seq=133827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=79.9 pwm=0.458 sd_pos=1184560 sysload=0.25 cputime=204.209 memavail=7290396 print_time=3872.040 buffer_time=2.195 print_stall=0 extruder: target=240 temp=240.0 pwm=0.488
Stats 798647.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7031798 bytes_read=1493095 bytes_retransmit=9 bytes_invalid=0 send_seq=133902 receive_seq=133902 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=79.9 pwm=0.521 sd_pos=1185729 sysload=0.25 cputime=204.288 memavail=7290396 print_time=3873.414 buffer_time=2.570 print_stall=0 extruder: target=240 temp=239.9 pwm=0.495
Stats 798648.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7034967 bytes_read=1493698 bytes_retransmit=9 bytes_invalid=0 send_seq=133964 receive_seq=133964 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=79.9 pwm=0.521 sd_pos=1186571 sysload=0.25 cputime=204.350 memavail=7289896 print_time=3874.200 buffer_time=2.354 print_stall=0 extruder: target=240 temp=240.0 pwm=0.444
Stats 798649.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7036837 bytes_read=1494195 bytes_retransmit=9 bytes_invalid=0 send_seq=134005 receive_seq=134005 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=79.9 pwm=0.543 sd_pos=1186707 sysload=0.25 cputime=204.412 memavail=7289896 print_time=3875.029 buffer_time=2.183 print_stall=0 extruder: target=240 temp=240.1 pwm=0.406
Stats 798650.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7038006 bytes_read=1494613 bytes_retransmit=9 bytes_invalid=0 send_seq=134033 receive_seq=134033 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=79.9 pwm=0.435 sd_pos=1186762 sysload=0.23 cputime=204.472 memavail=7289896 print_time=3875.933 buffer_time=2.086 print_stall=0 extruder: target=240 temp=240.1 pwm=0.415
Stats 798651.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7039358 bytes_read=1495056 bytes_retransmit=9 bytes_invalid=0 send_seq=134063 receive_seq=134063 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=79.9 pwm=0.435 sd_pos=1186929 sysload=0.23 cputime=204.541 memavail=7289896 print_time=3877.282 buffer_time=2.434 print_stall=0 extruder: target=240 temp=240.0 pwm=0.497
Stats 798652.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7040498 bytes_read=1495499 bytes_retransmit=9 bytes_invalid=0 send_seq=134090 receive_seq=134090 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=79.9 pwm=0.348 sd_pos=1186985 sysload=0.23 cputime=204.601 memavail=7289896 print_time=3877.872 buffer_time=2.023 print_stall=0 extruder: target=240 temp=239.7 pwm=0.579
Stats 798653.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7044483 bytes_read=1496152 bytes_retransmit=9 bytes_invalid=0 send_seq=134165 receive_seq=134165 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=79.9 pwm=0.434 sd_pos=1187605 sysload=0.23 cputime=204.674 memavail=7289896 print_time=3879.501 buffer_time=2.651 print_stall=0 extruder: target=240 temp=239.9 pwm=0.436
Stats 798654.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7047998 bytes_read=1496775 bytes_retransmit=9 bytes_invalid=0 send_seq=134231 receive_seq=134231 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=1188183 sysload=0.23 cputime=204.740 memavail=7290876 print_time=3880.125 buffer_time=2.274 print_stall=0 extruder: target=240 temp=239.8 pwm=0.533
Stats 798655.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7051020 bytes_read=1497352 bytes_retransmit=9 bytes_invalid=0 send_seq=134288 receive_seq=134288 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=3843 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.445 sd_pos=1189550 sysload=0.21 cputime=204.800 memavail=7290876 print_time=3881.416 buffer_time=2.565 print_stall=0 extruder: target=240 temp=239.7 pwm=0.575
Stats 798656.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7056040 bytes_read=1498081 bytes_retransmit=9 bytes_invalid=0 send_seq=134375 receive_seq=134375 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=2777 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.349 sd_pos=1190208 sysload=0.21 cputime=204.876 memavail=7290876 print_time=3882.071 buffer_time=2.218 print_stall=0 extruder: target=240 temp=239.9 pwm=0.447
Stats 798657.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7061405 bytes_read=1498834 bytes_retransmit=9 bytes_invalid=0 send_seq=134467 receive_seq=134467 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=3894 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.309 sd_pos=1191321 sysload=0.21 cputime=204.956 memavail=7290876 print_time=3883.315 buffer_time=2.461 print_stall=0 extruder: target=240 temp=240.1 pwm=0.436
Stats 798658.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7067333 bytes_read=1499631 bytes_retransmit=9 bytes_invalid=0 send_seq=134568 receive_seq=134568 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=529 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=1191798 sysload=0.21 cputime=205.040 memavail=7291632 print_time=3883.939 buffer_time=2.084 print_stall=0 extruder: target=240 temp=240.0 pwm=0.464
Stats 798659.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7070342 bytes_read=1500189 bytes_retransmit=9 bytes_invalid=0 send_seq=134624 receive_seq=134624 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.1 pwm=0.355 sd_pos=1192614 sysload=0.21 cputime=205.098 memavail=7294044 print_time=3884.970 buffer_time=2.113 print_stall=0 extruder: target=240 temp=240.1 pwm=0.390
Stats 798660.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7073534 bytes_read=1500811 bytes_retransmit=9 bytes_invalid=0 send_seq=134687 receive_seq=134687 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.400 sd_pos=1193449 sysload=0.19 cputime=205.175 memavail=7294108 print_time=3886.199 buffer_time=2.341 print_stall=0 extruder: target=240 temp=240.0 pwm=0.474
Stats 798661.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7077405 bytes_read=1501444 bytes_retransmit=9 bytes_invalid=0 send_seq=134758 receive_seq=134758 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.1 pwm=0.400 sd_pos=1194027 sysload=0.19 cputime=205.242 memavail=7294108 print_time=3887.207 buffer_time=2.348 print_stall=0 extruder: target=240 temp=239.9 pwm=0.474
Stats 798662.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7080530 bytes_read=1502038 bytes_retransmit=9 bytes_invalid=0 send_seq=134818 receive_seq=134818 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.1 pwm=0.461 sd_pos=1194424 sysload=0.19 cputime=205.307 memavail=7294108 print_time=3887.944 buffer_time=2.085 print_stall=0 extruder: target=240 temp=239.7 pwm=0.528
Stats 798663.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7083358 bytes_read=1502620 bytes_retransmit=9 bytes_invalid=0 send_seq=134873 receive_seq=134873 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.1 pwm=0.388 sd_pos=1195656 sysload=0.19 cputime=205.380 memavail=7294108 print_time=3888.918 buffer_time=2.058 print_stall=0 extruder: target=240 temp=240.0 pwm=0.388
Stats 798664.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7086234 bytes_read=1503183 bytes_retransmit=9 bytes_invalid=0 send_seq=134930 receive_seq=134930 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.1 pwm=0.382 sd_pos=1196169 sysload=0.19 cputime=205.448 memavail=7292548 print_time=3889.990 buffer_time=2.128 print_stall=0 extruder: target=240 temp=240.2 pwm=0.348
Stats 798665.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7092589 bytes_read=1504031 bytes_retransmit=9 bytes_invalid=0 send_seq=135044 receive_seq=135044 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=96 freq=119992766 heater_bed: target=80 temp=80.1 pwm=0.433 sd_pos=1197176 sysload=0.18 cputime=205.539 memavail=7292400 print_time=3891.576 buffer_time=2.714 print_stall=0 extruder: target=240 temp=240.1 pwm=0.422
Stats 798666.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7095291 bytes_read=1504598 bytes_retransmit=9 bytes_invalid=0 send_seq=135096 receive_seq=135096 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=7 freq=119992811 heater_bed: target=80 temp=80.1 pwm=0.437 sd_pos=1197801 sysload=0.18 cputime=205.613 memavail=7292400 print_time=3892.109 buffer_time=2.246 print_stall=0 extruder: target=240 temp=240.0 pwm=0.473
Stats 798667.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7098500 bytes_read=1505182 bytes_retransmit=9 bytes_invalid=0 send_seq=135154 receive_seq=135154 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=80.0 pwm=0.512 sd_pos=1198248 sysload=0.18 cputime=205.699 memavail=7292400 print_time=3892.917 buffer_time=2.054 print_stall=0 extruder: target=240 temp=240.3 pwm=0.306
Stats 798668.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7102760 bytes_read=1505860 bytes_retransmit=9 bytes_invalid=0 send_seq=135234 receive_seq=135234 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=1199250 sysload=0.18 cputime=205.777 memavail=7292148 print_time=3894.193 buffer_time=2.329 print_stall=0 extruder: target=240 temp=240.0 pwm=0.462
Stats 798669.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7105369 bytes_read=1506427 bytes_retransmit=9 bytes_invalid=0 send_seq=135286 receive_seq=135286 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.553 sd_pos=1199915 sysload=0.18 cputime=205.838 memavail=7292148 print_time=3895.023 buffer_time=2.159 print_stall=0 extruder: target=240 temp=240.0 pwm=0.462
Stats 798670.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7110635 bytes_read=1507175 bytes_retransmit=9 bytes_invalid=0 send_seq=135380 receive_seq=135380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=79.9 pwm=0.583 sd_pos=1201048 sysload=0.16 cputime=205.911 memavail=7292148 print_time=3896.353 buffer_time=2.489 print_stall=0 extruder: target=240 temp=240.1 pwm=0.428
Stats 798671.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7113872 bytes_read=1507748 bytes_retransmit=9 bytes_invalid=0 send_seq=135439 receive_seq=135439 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=79.9 pwm=0.482 sd_pos=1201710 sysload=0.16 cputime=205.980 memavail=7292148 print_time=3897.050 buffer_time=2.185 print_stall=0 extruder: target=240 temp=240.0 pwm=0.452
Stats 798672.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7117598 bytes_read=1508426 bytes_retransmit=9 bytes_invalid=0 send_seq=135510 receive_seq=135510 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=79.9 pwm=0.504 sd_pos=1203021 sysload=0.16 cputime=206.056 memavail=7292148 print_time=3898.242 buffer_time=2.375 print_stall=0 extruder: target=240 temp=240.2 pwm=0.365
Stats 798673.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7120253 bytes_read=1508964 bytes_retransmit=9 bytes_invalid=0 send_seq=135562 receive_seq=135562 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=79.9 pwm=0.559 sd_pos=1203780 sysload=0.16 cputime=206.120 memavail=7292148 print_time=3898.958 buffer_time=2.090 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 798674.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7124661 bytes_read=1509652 bytes_retransmit=9 bytes_invalid=0 send_seq=135644 receive_seq=135644 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=79.9 pwm=0.440 sd_pos=1204940 sysload=0.16 cputime=206.195 memavail=7292148 print_time=3900.344 buffer_time=2.477 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 798675.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7126416 bytes_read=1510144 bytes_retransmit=9 bytes_invalid=0 send_seq=135681 receive_seq=135681 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=79.9 pwm=0.552 sd_pos=1205074 sysload=0.15 cputime=206.250 memavail=7292148 print_time=3901.174 buffer_time=2.306 print_stall=0 extruder: target=240 temp=239.9 pwm=0.512
Stats 798676.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7127577 bytes_read=1510557 bytes_retransmit=9 bytes_invalid=0 send_seq=135708 receive_seq=135708 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=79.9 pwm=0.440 sd_pos=1205129 sysload=0.15 cputime=206.296 memavail=7292148 print_time=3902.078 buffer_time=2.209 print_stall=0 extruder: target=240 temp=240.0 pwm=0.512
Stats 798677.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7128974 bytes_read=1510999 bytes_retransmit=9 bytes_invalid=0 send_seq=135738 receive_seq=135738 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=79.9 pwm=0.470 sd_pos=1205296 sysload=0.15 cputime=206.349 memavail=7291700 print_time=3903.427 buffer_time=2.557 print_stall=0 extruder: target=240 temp=239.9 pwm=0.498
Stats 798678.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7130136 bytes_read=1511442 bytes_retransmit=9 bytes_invalid=0 send_seq=135767 receive_seq=135767 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=79.9 pwm=0.404 sd_pos=1205352 sysload=0.15 cputime=206.407 memavail=7291708 print_time=3904.017 buffer_time=2.147 print_stall=0 extruder: target=240 temp=240.2 pwm=0.360
Stats 798679.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7130902 bytes_read=1511825 bytes_retransmit=9 bytes_invalid=0 send_seq=135789 receive_seq=135789 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=1205474 sysload=0.15 cputime=206.460 memavail=7291708 print_time=3904.871 buffer_time=2.000 print_stall=0 extruder: target=240 temp=240.2 pwm=0.437
Stats 798680.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7138098 bytes_read=1512748 bytes_retransmit=9 bytes_invalid=0 send_seq=135918 receive_seq=135918 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=1206648 sysload=0.38 cputime=206.545 memavail=7291708 print_time=3906.344 buffer_time=2.471 print_stall=0 extruder: target=240 temp=239.9 pwm=0.517
Stats 798681.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7140197 bytes_read=1513265 bytes_retransmit=9 bytes_invalid=0 send_seq=135960 receive_seq=135960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=1396 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=1207256 sysload=0.38 cputime=206.607 memavail=7291708 print_time=3907.003 buffer_time=2.130 print_stall=0 extruder: target=240 temp=239.9 pwm=0.473
Stats 798682.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7145047 bytes_read=1513979 bytes_retransmit=9 bytes_invalid=0 send_seq=136044 receive_seq=136044 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=2973 freq=119992795 heater_bed: target=80 temp=80.0 pwm=0.327 sd_pos=1208502 sysload=0.38 cputime=206.716 memavail=7291484 print_time=3908.263 buffer_time=2.389 print_stall=0 extruder: target=240 temp=240.0 pwm=0.473
Stats 798683.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7150406 bytes_read=1514717 bytes_retransmit=9 bytes_invalid=0 send_seq=136136 receive_seq=136136 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1434 freq=119992798 heater_bed: target=80 temp=80.0 pwm=0.447 sd_pos=1209170 sysload=0.38 cputime=206.825 memavail=7291484 print_time=3908.957 buffer_time=2.083 print_stall=0 extruder: target=240 temp=239.8 pwm=0.473
Stats 798684.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7155795 bytes_read=1515489 bytes_retransmit=9 bytes_invalid=0 send_seq=136229 receive_seq=136229 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=1018 freq=119992789 heater_bed: target=80 temp=80.0 pwm=0.386 sd_pos=1210027 sysload=0.38 cputime=206.927 memavail=7291484 print_time=3910.064 buffer_time=2.190 print_stall=0 extruder: target=240 temp=240.0 pwm=0.411
Stats 798685.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7159818 bytes_read=1516143 bytes_retransmit=9 bytes_invalid=0 send_seq=136302 receive_seq=136302 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992775 heater_bed: target=80 temp=80.1 pwm=0.391 sd_pos=1210794 sysload=0.35 cputime=207.004 memavail=7291484 print_time=3911.236 buffer_time=2.361 print_stall=0 extruder: target=240 temp=240.1 pwm=0.359
Stats 798686.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7163015 bytes_read=1516726 bytes_retransmit=9 bytes_invalid=0 send_seq=136363 receive_seq=136363 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.1 pwm=0.464 sd_pos=1211624 sysload=0.35 cputime=207.076 memavail=7291484 print_time=3912.459 buffer_time=2.584 print_stall=0 extruder: target=240 temp=240.1 pwm=0.388
Stats 798687.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7166753 bytes_read=1517409 bytes_retransmit=9 bytes_invalid=0 send_seq=136435 receive_seq=136435 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.1 pwm=0.426 sd_pos=1212268 sysload=0.35 cputime=207.145 memavail=7291484 print_time=3913.300 buffer_time=2.424 print_stall=0 extruder: target=240 temp=240.3 pwm=0.335
Stats 798688.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7169259 bytes_read=1517942 bytes_retransmit=9 bytes_invalid=0 send_seq=136486 receive_seq=136486 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.1 pwm=0.486 sd_pos=1212686 sysload=0.35 cputime=207.207 memavail=7291260 print_time=3913.889 buffer_time=2.013 print_stall=0 extruder: target=240 temp=240.1 pwm=0.458
Stats 798689.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7174182 bytes_read=1518680 bytes_retransmit=9 bytes_invalid=0 send_seq=136575 receive_seq=136575 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=56 freq=119992789 heater_bed: target=80 temp=80.1 pwm=0.385 sd_pos=1213790 sysload=0.35 cputime=207.300 memavail=7291264 print_time=3915.206 buffer_time=2.328 print_stall=0 extruder: target=240 temp=239.9 pwm=0.520
Stats 798690.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7177582 bytes_read=1519287 bytes_retransmit=9 bytes_invalid=0 send_seq=136638 receive_seq=136638 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.1 pwm=0.385 sd_pos=1214639 sysload=0.32 cputime=207.366 memavail=7291264 print_time=3916.198 buffer_time=2.320 print_stall=0 extruder: target=240 temp=239.8 pwm=0.520
Stats 798691.4: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7180667 bytes_read=1519860 bytes_retransmit=9 bytes_invalid=0 send_seq=136697 receive_seq=136697 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.1 pwm=0.385 sd_pos=1215382 sysload=0.32 cputime=207.434 memavail=7291264 print_time=3917.128 buffer_time=2.249 print_stall=0 extruder: target=240 temp=240.1 pwm=0.393
Stats 798692.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7185815 bytes_read=1520629 bytes_retransmit=9 bytes_invalid=0 send_seq=136789 receive_seq=136789 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=378 freq=119992802 heater_bed: target=80 temp=80.1 pwm=0.497 sd_pos=1216585 sysload=0.32 cputime=207.530 memavail=7291264 print_time=3918.608 buffer_time=2.729 print_stall=0 extruder: target=240 temp=240.0 pwm=0.448
Stats 798693.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7188536 bytes_read=1521186 bytes_retransmit=9 bytes_invalid=0 send_seq=136842 receive_seq=136842 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=1217240 sysload=0.32 cputime=207.597 memavail=7291264 print_time=3919.141 buffer_time=2.261 print_stall=0 extruder: target=240 temp=240.2 pwm=0.350
Stats 798694.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7191716 bytes_read=1521754 bytes_retransmit=9 bytes_invalid=0 send_seq=136900 receive_seq=136900 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.0 pwm=0.494 sd_pos=1217587 sysload=0.32 cputime=207.665 memavail=7291264 print_time=3919.936 buffer_time=2.055 print_stall=0 extruder: target=240 temp=240.4 pwm=0.332
Stats 798695.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7196800 bytes_read=1522512 bytes_retransmit=9 bytes_invalid=0 send_seq=136993 receive_seq=136993 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=286 freq=119992772 heater_bed: target=80 temp=80.0 pwm=0.541 sd_pos=1218767 sysload=0.29 cputime=207.770 memavail=7290992 print_time=3921.541 buffer_time=2.659 print_stall=0 extruder: target=240 temp=240.0 pwm=0.524
Stats 798696.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7199753 bytes_read=1523084 bytes_retransmit=9 bytes_invalid=0 send_seq=137049 receive_seq=137049 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=1219615 sysload=0.29 cputime=207.819 memavail=7290992 print_time=3922.356 buffer_time=2.474 print_stall=0 extruder: target=240 temp=239.8 pwm=0.524
Stats 798697.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7203321 bytes_read=1523718 bytes_retransmit=9 bytes_invalid=0 send_seq=137117 receive_seq=137117 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=1220617 sysload=0.29 cputime=207.881 memavail=7290992 print_time=3923.267 buffer_time=2.383 print_stall=0 extruder: target=240 temp=239.7 pwm=0.559
Stats 798698.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7207743 bytes_read=1524416 bytes_retransmit=9 bytes_invalid=0 send_seq=137198 receive_seq=137198 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=79.9 pwm=0.550 sd_pos=1221347 sysload=0.29 cputime=207.944 memavail=7290488 print_time=3924.175 buffer_time=2.291 print_stall=0 extruder: target=240 temp=240.2 pwm=0.333
Stats 798699.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7210638 bytes_read=1524988 bytes_retransmit=9 bytes_invalid=0 send_seq=137254 receive_seq=137254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=79.9 pwm=0.550 sd_pos=1222646 sysload=0.29 cputime=208.005 memavail=7290488 print_time=3925.145 buffer_time=2.260 print_stall=0 extruder: target=240 temp=240.2 pwm=0.411
Stats 798700.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7214194 bytes_read=1525601 bytes_retransmit=9 bytes_invalid=0 send_seq=137321 receive_seq=137321 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=79.9 pwm=0.566 sd_pos=1223465 sysload=0.27 cputime=208.088 memavail=7290488 print_time=3926.030 buffer_time=2.145 print_stall=0 extruder: target=240 temp=240.0 pwm=0.494
Stats 798701.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7219099 bytes_read=1526339 bytes_retransmit=9 bytes_invalid=0 send_seq=137410 receive_seq=137410 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=79.9 pwm=0.480 sd_pos=1224832 sysload=0.27 cputime=208.170 memavail=7290488 print_time=3927.569 buffer_time=2.683 print_stall=0 extruder: target=240 temp=240.2 pwm=0.400
Stats 798702.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7220490 bytes_read=1526812 bytes_retransmit=9 bytes_invalid=0 send_seq=137443 receive_seq=137443 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=79.8 pwm=0.577 sd_pos=1224941 sysload=0.27 cputime=208.233 memavail=7290488 print_time=3927.926 buffer_time=2.040 print_stall=0 extruder: target=240 temp=240.1 pwm=0.435
Stats 798703.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7222094 bytes_read=1527270 bytes_retransmit=9 bytes_invalid=0 send_seq=137479 receive_seq=137479 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=79.9 pwm=0.474 sd_pos=1225036 sysload=0.27 cputime=208.294 memavail=7290488 print_time=3929.303 buffer_time=2.415 print_stall=0 extruder: target=240 temp=239.9 pwm=0.491
Stats 798704.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7223301 bytes_read=1527703 bytes_retransmit=9 bytes_invalid=0 send_seq=137507 receive_seq=137507 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=79.9 pwm=0.417 sd_pos=1225146 sysload=0.27 cputime=208.348 memavail=7290488 print_time=3929.922 buffer_time=2.035 print_stall=0 extruder: target=240 temp=239.7 pwm=0.545
Stats 798705.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7224168 bytes_read=1528105 bytes_retransmit=9 bytes_invalid=0 send_seq=137529 receive_seq=137529 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=79.9 pwm=0.362 sd_pos=1225271 sysload=0.25 cputime=208.401 memavail=7290488 print_time=3930.919 buffer_time=2.031 print_stall=0 extruder: target=240 temp=240.2 pwm=0.305
Stats 798706.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7225445 bytes_read=1528538 bytes_retransmit=9 bytes_invalid=0 send_seq=137560 receive_seq=137560 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=79.9 pwm=0.492 sd_pos=1225393 sysload=0.25 cputime=208.451 memavail=7290488 print_time=3932.096 buffer_time=2.207 print_stall=0 extruder: target=240 temp=240.1 pwm=0.437
Stats 798707.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=7232027 bytes_read=1529441 bytes_retransmit=9 bytes_invalid=0 send_seq=137679 receive_seq=137679 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.301 sd_pos=1226499 sysload=0.25 cputime=208.530 memavail=7290264 print_time=3933.463 buffer_time=2.574 print_stall=0 extruder: target=240 temp=240.3 pwm=0.334
Stats 798708.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=7234662 bytes_read=1529993 bytes_retransmit=9 bytes_invalid=0 send_seq=137731 receive_seq=137731 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=925 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=1227164 sysload=0.25 cputime=208.593 memavail=7290264 print_time=3934.114 buffer_time=2.224 print_stall=0 extruder: target=240 temp=240.2 pwm=0.452
Stats 798709.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=7238568 bytes_read=1530616 bytes_retransmit=9 bytes_invalid=0 send_seq=137800 receive_seq=137800 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=3175 freq=119992743 heater_bed: target=80 temp=80.0 pwm=0.375 sd_pos=1228475 sysload=0.25 cputime=208.690 memavail=7290272 print_time=3935.311 buffer_time=2.420 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 798710.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=7243937 bytes_read=1531374 bytes_retransmit=9 bytes_invalid=0 send_seq=137893 receive_seq=137893 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1384 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.375 sd_pos=1229174 sysload=0.23 cputime=208.784 memavail=7290272 print_time=3935.967 buffer_time=2.076 print_stall=0 extruder: target=240 temp=239.9 pwm=0.514
Stats 798711.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=7249310 bytes_read=1532126 bytes_retransmit=9 bytes_invalid=0 send_seq=137985 receive_seq=137985 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=871 freq=119992735 heater_bed: target=80 temp=80.1 pwm=0.375 sd_pos=1229963 sysload=0.23 cputime=208.892 memavail=7290272 print_time=3937.121 buffer_time=2.229 print_stall=0 extruder: target=240 temp=239.8 pwm=0.505
Stats 798712.4: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7252693 bytes_read=1532735 bytes_retransmit=9 bytes_invalid=0 send_seq=138048 receive_seq=138048 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=80.1 pwm=0.442 sd_pos=1230776 sysload=0.23 cputime=208.970 memavail=7290272 print_time=3938.158 buffer_time=2.265 print_stall=0 extruder: target=240 temp=240.1 pwm=0.396
Stats 798713.4: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7255789 bytes_read=1533333 bytes_retransmit=9 bytes_invalid=0 send_seq=138110 receive_seq=138110 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.1 pwm=0.390 sd_pos=1231550 sysload=0.23 cputime=209.039 memavail=7290272 print_time=3939.359 buffer_time=2.466 print_stall=0 extruder: target=240 temp=240.1 pwm=0.371
Stats 798714.4: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7259689 bytes_read=1533982 bytes_retransmit=9 bytes_invalid=0 send_seq=138183 receive_seq=138183 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.1 pwm=0.460 sd_pos=1232111 sysload=0.23 cputime=209.109 memavail=7290272 print_time=3940.302 buffer_time=2.409 print_stall=0 extruder: target=240 temp=240.0 pwm=0.485
Stats 798715.4: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7262986 bytes_read=1534581 bytes_retransmit=9 bytes_invalid=0 send_seq=138248 receive_seq=138248 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.1 pwm=0.422 sd_pos=1232940 sysload=0.21 cputime=209.175 memavail=7290272 print_time=3941.320 buffer_time=2.426 print_stall=0 extruder: target=240 temp=240.1 pwm=0.358
Stats 798716.4: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7265277 bytes_read=1535104 bytes_retransmit=9 bytes_invalid=0 send_seq=138294 receive_seq=138294 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.1 pwm=0.397 sd_pos=1233727 sysload=0.21 cputime=209.243 memavail=7290272 print_time=3942.011 buffer_time=2.117 print_stall=0 extruder: target=240 temp=240.1 pwm=0.381
Stats 798717.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7268482 bytes_read=1535727 bytes_retransmit=9 bytes_invalid=0 send_seq=138357 receive_seq=138357 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.1 pwm=0.477 sd_pos=1234420 sysload=0.21 cputime=209.309 memavail=7290272 print_time=3943.077 buffer_time=2.182 print_stall=0 extruder: target=240 temp=240.1 pwm=0.407
Stats 798718.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7274194 bytes_read=1536525 bytes_retransmit=9 bytes_invalid=0 send_seq=138461 receive_seq=138461 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=80.1 pwm=0.424 sd_pos=1235405 sysload=0.21 cputime=209.401 memavail=7290280 print_time=3944.498 buffer_time=2.602 print_stall=0 extruder: target=240 temp=240.0 pwm=0.478
Stats 798719.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7277227 bytes_read=1537103 bytes_retransmit=9 bytes_invalid=0 send_seq=138518 receive_seq=138518 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.1 pwm=0.483 sd_pos=1235757 sysload=0.21 cputime=209.482 memavail=7290280 print_time=3945.249 buffer_time=2.353 print_stall=0 extruder: target=240 temp=239.8 pwm=0.560
Stats 798720.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7280130 bytes_read=1537665 bytes_retransmit=9 bytes_invalid=0 send_seq=138572 receive_seq=138572 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.483 sd_pos=1236351 sysload=0.19 cputime=209.561 memavail=7290280 print_time=3946.029 buffer_time=2.133 print_stall=0 extruder: target=240 temp=240.2 pwm=0.340
Stats 798721.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7283453 bytes_read=1538258 bytes_retransmit=9 bytes_invalid=0 send_seq=138635 receive_seq=138635 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.1 pwm=0.422 sd_pos=1237370 sysload=0.19 cputime=209.641 memavail=7290280 print_time=3947.013 buffer_time=2.115 print_stall=0 extruder: target=240 temp=239.9 pwm=0.450
Stats 798722.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7286367 bytes_read=1538852 bytes_retransmit=9 bytes_invalid=0 send_seq=138692 receive_seq=138692 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.524 sd_pos=1238275 sysload=0.19 cputime=209.707 memavail=7290280 print_time=3947.905 buffer_time=2.006 print_stall=0 extruder: target=240 temp=240.0 pwm=0.407
Stats 798723.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7291489 bytes_read=1539589 bytes_retransmit=9 bytes_invalid=0 send_seq=138781 receive_seq=138781 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992811 heater_bed: target=80 temp=80.0 pwm=0.524 sd_pos=1239488 sysload=0.19 cputime=209.792 memavail=7290280 print_time=3949.233 buffer_time=2.333 print_stall=0 extruder: target=240 temp=240.1 pwm=0.372
Stats 798724.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7294938 bytes_read=1540182 bytes_retransmit=9 bytes_invalid=0 send_seq=138844 receive_seq=138844 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=79.9 pwm=0.524 sd_pos=1240122 sysload=0.19 cputime=209.867 memavail=7290280 print_time=3949.947 buffer_time=2.046 print_stall=0 extruder: target=240 temp=240.1 pwm=0.372
Stats 798725.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7298863 bytes_read=1540835 bytes_retransmit=9 bytes_invalid=0 send_seq=138916 receive_seq=138916 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=79.9 pwm=0.455 sd_pos=1241185 sysload=0.18 cputime=209.947 memavail=7289996 print_time=3951.184 buffer_time=2.282 print_stall=0 extruder: target=240 temp=240.0 pwm=0.490
Stats 798726.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7302418 bytes_read=1541478 bytes_retransmit=9 bytes_invalid=0 send_seq=138983 receive_seq=138983 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=1242159 sysload=0.18 cputime=210.020 memavail=7289996 print_time=3952.404 buffer_time=2.501 print_stall=0 extruder: target=240 temp=240.2 pwm=0.365
Stats 798727.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7305768 bytes_read=1542081 bytes_retransmit=9 bytes_invalid=0 send_seq=139048 receive_seq=139048 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=79.9 pwm=0.457 sd_pos=1243123 sysload=0.18 cputime=210.086 memavail=7289996 print_time=3953.190 buffer_time=2.287 print_stall=0 extruder: target=240 temp=239.9 pwm=0.479
Stats 798728.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7307546 bytes_read=1542564 bytes_retransmit=9 bytes_invalid=0 send_seq=139086 receive_seq=139086 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=79.9 pwm=0.457 sd_pos=1243259 sysload=0.18 cputime=210.144 memavail=7289520 print_time=3954.022 buffer_time=2.119 print_stall=0 extruder: target=240 temp=240.1 pwm=0.363
Stats 798729.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7308721 bytes_read=1543001 bytes_retransmit=9 bytes_invalid=0 send_seq=139115 receive_seq=139115 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=79.9 pwm=0.457 sd_pos=1243314 sysload=0.18 cputime=210.205 memavail=7289524 print_time=3954.926 buffer_time=2.023 print_stall=0 extruder: target=240 temp=239.9 pwm=0.448
Stats 798730.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7310107 bytes_read=1543429 bytes_retransmit=9 bytes_invalid=0 send_seq=139145 receive_seq=139145 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1243481 sysload=0.24 cputime=210.264 memavail=7289524 print_time=3956.275 buffer_time=2.371 print_stall=0 extruder: target=240 temp=240.3 pwm=0.303
Stats 798731.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=7311827 bytes_read=1543922 bytes_retransmit=9 bytes_invalid=0 send_seq=139182 receive_seq=139182 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1243659 sysload=0.24 cputime=210.319 memavail=7289524 print_time=3957.720 buffer_time=2.815 print_stall=0 extruder: target=240 temp=239.8 pwm=0.507
Stats 798732.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=7315236 bytes_read=1544549 bytes_retransmit=9 bytes_invalid=0 send_seq=139249 receive_seq=139249 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=1244178 sysload=0.24 cputime=210.384 memavail=7289524 print_time=3958.493 buffer_time=2.588 print_stall=0 extruder: target=240 temp=240.0 pwm=0.477
Stats 798733.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=7318952 bytes_read=1545187 bytes_retransmit=9 bytes_invalid=0 send_seq=139321 receive_seq=139321 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=1244901 sysload=0.24 cputime=210.457 memavail=7289524 print_time=3959.167 buffer_time=2.261 print_stall=0 extruder: target=240 temp=240.0 pwm=0.432
Stats 798734.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=7322161 bytes_read=1545785 bytes_retransmit=9 bytes_invalid=0 send_seq=139382 receive_seq=139382 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=3640 freq=119992755 heater_bed: target=80 temp=80.0 pwm=0.382 sd_pos=1246347 sysload=0.24 cputime=210.552 memavail=7289524 print_time=3960.514 buffer_time=2.607 print_stall=0 extruder: target=240 temp=240.1 pwm=0.374
Stats 798735.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=7327182 bytes_read=1546507 bytes_retransmit=9 bytes_invalid=0 send_seq=139468 receive_seq=139468 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2366 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=1247071 sysload=0.22 cputime=210.653 memavail=7289524 print_time=3961.188 buffer_time=2.280 print_stall=0 extruder: target=240 temp=239.9 pwm=0.436
Stats 798736.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7332620 bytes_read=1547266 bytes_retransmit=9 bytes_invalid=0 send_seq=139561 receive_seq=139561 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=2896 freq=119992747 heater_bed: target=80 temp=80.1 pwm=0.366 sd_pos=1248075 sysload=0.22 cputime=210.759 memavail=7289524 print_time=3962.505 buffer_time=2.597 print_stall=0 extruder: target=240 temp=240.1 pwm=0.436
Stats 798737.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7337476 bytes_read=1547979 bytes_retransmit=9 bytes_invalid=0 send_seq=139645 receive_seq=139645 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=80.1 pwm=0.430 sd_pos=1248437 sysload=0.22 cputime=210.856 memavail=7289076 print_time=3963.317 buffer_time=2.408 print_stall=0 extruder: target=240 temp=239.8 pwm=0.513
Stats 798738.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7339564 bytes_read=1548491 bytes_retransmit=9 bytes_invalid=0 send_seq=139689 receive_seq=139689 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.1 pwm=0.445 sd_pos=1248848 sysload=0.22 cputime=210.941 memavail=7289076 print_time=3964.240 buffer_time=2.330 print_stall=0 extruder: target=240 temp=240.1 pwm=0.380
Stats 798739.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7345247 bytes_read=1549279 bytes_retransmit=9 bytes_invalid=0 send_seq=139791 receive_seq=139791 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.1 pwm=0.445 sd_pos=1249910 sysload=0.22 cputime=211.026 memavail=7289080 print_time=3965.816 buffer_time=2.906 print_stall=0 extruder: target=240 temp=240.2 pwm=0.380
Stats 798740.4: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7347160 bytes_read=1549777 bytes_retransmit=9 bytes_invalid=0 send_seq=139832 receive_seq=139832 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.1 pwm=0.412 sd_pos=1250654 sysload=0.20 cputime=211.102 memavail=7289080 print_time=3966.184 buffer_time=2.273 print_stall=0 extruder: target=240 temp=240.0 pwm=0.517
Stats 798741.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7350207 bytes_read=1550360 bytes_retransmit=9 bytes_invalid=0 send_seq=139887 receive_seq=139887 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.1 pwm=0.412 sd_pos=1250983 sysload=0.20 cputime=211.181 memavail=7289080 print_time=3966.971 buffer_time=2.060 print_stall=0 extruder: target=240 temp=239.8 pwm=0.528
Stats 798742.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7354807 bytes_read=1551058 bytes_retransmit=9 bytes_invalid=0 send_seq=139971 receive_seq=139971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.1 pwm=0.412 sd_pos=1252477 sysload=0.20 cputime=211.272 memavail=7289080 print_time=3968.340 buffer_time=2.428 print_stall=0 extruder: target=240 temp=239.8 pwm=0.479
Stats 798743.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7358204 bytes_read=1551661 bytes_retransmit=9 bytes_invalid=0 send_seq=140033 receive_seq=140033 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.1 pwm=0.412 sd_pos=1253275 sysload=0.20 cputime=211.348 memavail=7289080 print_time=3969.301 buffer_time=2.388 print_stall=0 extruder: target=240 temp=239.8 pwm=0.479
Stats 798744.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7360544 bytes_read=1552193 bytes_retransmit=9 bytes_invalid=0 send_seq=140081 receive_seq=140081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=80.1 pwm=0.412 sd_pos=1253735 sysload=0.20 cputime=211.421 memavail=7288856 print_time=3969.975 buffer_time=2.062 print_stall=0 extruder: target=240 temp=240.2 pwm=0.362
Stats 798745.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7366731 bytes_read=1553021 bytes_retransmit=9 bytes_invalid=0 send_seq=140191 receive_seq=140191 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=726 freq=119992743 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=1255370 sysload=0.19 cputime=211.529 memavail=7288856 print_time=3971.569 buffer_time=2.656 print_stall=0 extruder: target=240 temp=240.1 pwm=0.448
Stats 798746.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7369670 bytes_read=1553589 bytes_retransmit=9 bytes_invalid=0 send_seq=140246 receive_seq=140246 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=340 freq=119992741 heater_bed: target=80 temp=80.1 pwm=0.419 sd_pos=1255655 sysload=0.19 cputime=211.607 memavail=7288856 print_time=3972.277 buffer_time=2.363 print_stall=0 extruder: target=240 temp=240.0 pwm=0.448
Stats 798747.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7374041 bytes_read=1554292 bytes_retransmit=9 bytes_invalid=0 send_seq=140325 receive_seq=140325 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=386 freq=119992747 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=1256770 sysload=0.19 cputime=211.696 memavail=7288856 print_time=3973.567 buffer_time=2.652 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 798748.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7376535 bytes_read=1554831 bytes_retransmit=9 bytes_invalid=0 send_seq=140375 receive_seq=140375 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=1257312 sysload=0.19 cputime=211.775 memavail=7288856 print_time=3974.188 buffer_time=2.272 print_stall=0 extruder: target=240 temp=240.0 pwm=0.425
Stats 798749.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7379623 bytes_read=1555417 bytes_retransmit=9 bytes_invalid=0 send_seq=140435 receive_seq=140435 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=1258427 sysload=0.19 cputime=211.857 memavail=7288860 print_time=3975.038 buffer_time=2.122 print_stall=0 extruder: target=240 temp=239.8 pwm=0.524
Stats 798750.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7384618 bytes_read=1556096 bytes_retransmit=9 bytes_invalid=0 send_seq=140526 receive_seq=140514 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=646 upcoming_bytes=1160 freq=119992763 heater_bed: target=80 temp=80.0 pwm=0.555 sd_pos=1259877 sysload=0.25 cputime=211.950 memavail=7288860 print_time=3976.691 buffer_time=2.761 print_stall=0 extruder: target=240 temp=240.0 pwm=0.481
Stats 798751.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7388377 bytes_read=1556772 bytes_retransmit=9 bytes_invalid=0 send_seq=140594 receive_seq=140594 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.499 sd_pos=1260258 sysload=0.25 cputime=212.022 memavail=7288860 print_time=3977.278 buffer_time=2.347 print_stall=0 extruder: target=240 temp=239.8 pwm=0.563
Stats 798752.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7391610 bytes_read=1557391 bytes_retransmit=9 bytes_invalid=0 send_seq=140656 receive_seq=140656 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=79.9 pwm=0.539 sd_pos=1261471 sysload=0.25 cputime=212.101 memavail=7288860 print_time=3978.177 buffer_time=2.246 print_stall=0 extruder: target=240 temp=240.0 pwm=0.467
Stats 798753.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7394031 bytes_read=1557923 bytes_retransmit=9 bytes_invalid=0 send_seq=140704 receive_seq=140704 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=79.9 pwm=0.487 sd_pos=1261917 sysload=0.25 cputime=212.166 memavail=7288860 print_time=3979.093 buffer_time=2.161 print_stall=0 extruder: target=240 temp=240.1 pwm=0.403
Stats 798754.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7397244 bytes_read=1558511 bytes_retransmit=9 bytes_invalid=0 send_seq=140766 receive_seq=140766 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=79.9 pwm=0.487 sd_pos=1262821 sysload=0.25 cputime=212.242 memavail=7288860 print_time=3979.892 buffer_time=1.959 print_stall=0 extruder: target=240 temp=239.9 pwm=0.479
Stats 798755.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7399589 bytes_read=1559049 bytes_retransmit=9 bytes_invalid=0 send_seq=140815 receive_seq=140815 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=79.9 pwm=0.425 sd_pos=1262957 sysload=0.31 cputime=212.301 memavail=7288344 print_time=3981.164 buffer_time=2.231 print_stall=0 extruder: target=240 temp=240.2 pwm=0.367
Stats 798756.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7400859 bytes_read=1559496 bytes_retransmit=9 bytes_invalid=0 send_seq=140846 receive_seq=140846 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=79.9 pwm=0.425 sd_pos=1263096 sysload=0.31 cputime=212.346 memavail=7288344 print_time=3982.089 buffer_time=2.156 print_stall=0 extruder: target=240 temp=239.8 pwm=0.501
Stats 798757.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7401654 bytes_read=1559895 bytes_retransmit=9 bytes_invalid=0 send_seq=140867 receive_seq=140867 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=79.9 pwm=0.499 sd_pos=1263153 sysload=0.31 cputime=212.387 memavail=7288344 print_time=3982.979 buffer_time=2.045 print_stall=0 extruder: target=240 temp=240.0 pwm=0.431
Stats 798758.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7403386 bytes_read=1560378 bytes_retransmit=9 bytes_invalid=0 send_seq=140905 receive_seq=140905 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=1263331 sysload=0.31 cputime=212.443 memavail=7289100 print_time=3984.424 buffer_time=2.489 print_stall=0 extruder: target=240 temp=240.1 pwm=0.353
Stats 798759.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7406691 bytes_read=1560985 bytes_retransmit=9 bytes_invalid=0 send_seq=140968 receive_seq=140968 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=1263792 sysload=0.31 cputime=212.491 memavail=7289104 print_time=3985.190 buffer_time=2.254 print_stall=0 extruder: target=240 temp=240.1 pwm=0.408
Stats 798760.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7412024 bytes_read=1561743 bytes_retransmit=9 bytes_invalid=0 send_seq=141064 receive_seq=141064 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=1522 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.349 sd_pos=1265012 sysload=0.37 cputime=212.576 memavail=7289104 print_time=3986.527 buffer_time=2.591 print_stall=0 extruder: target=240 temp=240.1 pwm=0.404
Stats 798761.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7414929 bytes_read=1562301 bytes_retransmit=9 bytes_invalid=0 send_seq=141117 receive_seq=141117 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=2099 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.354 sd_pos=1265618 sysload=0.37 cputime=212.650 memavail=7289104 print_time=3987.196 buffer_time=2.259 print_stall=0 extruder: target=240 temp=239.8 pwm=0.533
Stats 798762.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7420323 bytes_read=1563074 bytes_retransmit=9 bytes_invalid=0 send_seq=141210 receive_seq=141210 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=3333 freq=119992741 heater_bed: target=80 temp=80.0 pwm=0.354 sd_pos=1266835 sysload=0.37 cputime=212.756 memavail=7289104 print_time=3988.532 buffer_time=2.595 print_stall=0 extruder: target=240 temp=239.9 pwm=0.460
Stats 798763.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7425506 bytes_read=1563792 bytes_retransmit=9 bytes_invalid=0 send_seq=141298 receive_seq=141298 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=999 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=1267102 sysload=0.37 cputime=212.858 memavail=7289104 print_time=3989.177 buffer_time=2.239 print_stall=0 extruder: target=240 temp=239.8 pwm=0.542
Stats 798764.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7428363 bytes_read=1564350 bytes_retransmit=9 bytes_invalid=0 send_seq=141351 receive_seq=141351 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=1267343 sysload=0.37 cputime=212.941 memavail=7289104 print_time=3989.985 buffer_time=2.045 print_stall=0 extruder: target=240 temp=239.9 pwm=0.427
Stats 798765.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7431952 bytes_read=1564982 bytes_retransmit=9 bytes_invalid=0 send_seq=141419 receive_seq=141419 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=1268242 sysload=0.34 cputime=213.015 memavail=7289104 print_time=3991.425 buffer_time=2.485 print_stall=0 extruder: target=240 temp=240.0 pwm=0.427
Stats 798766.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7435630 bytes_read=1565605 bytes_retransmit=9 bytes_invalid=0 send_seq=141488 receive_seq=141488 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=1268602 sysload=0.34 cputime=213.079 memavail=7289104 print_time=3992.348 buffer_time=2.407 print_stall=0 extruder: target=240 temp=240.1 pwm=0.427
Stats 798767.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7438691 bytes_read=1566209 bytes_retransmit=9 bytes_invalid=0 send_seq=141547 receive_seq=141547 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=1269918 sysload=0.34 cputime=213.155 memavail=7289104 print_time=3993.097 buffer_time=2.155 print_stall=0 extruder: target=240 temp=239.7 pwm=0.578
Stats 798768.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7441757 bytes_read=1566796 bytes_retransmit=9 bytes_invalid=0 send_seq=141606 receive_seq=141606 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=1271298 sysload=0.34 cputime=213.248 memavail=7289104 print_time=3993.982 buffer_time=2.040 print_stall=0 extruder: target=240 temp=239.9 pwm=0.497
Stats 798769.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7445900 bytes_read=1567454 bytes_retransmit=9 bytes_invalid=0 send_seq=141682 receive_seq=141682 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992745 heater_bed: target=80 temp=80.1 pwm=0.395 sd_pos=1272479 sysload=0.34 cputime=213.332 memavail=7288892 print_time=3995.315 buffer_time=2.371 print_stall=0 extruder: target=240 temp=240.1 pwm=0.427
Stats 798770.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7448840 bytes_read=1568032 bytes_retransmit=9 bytes_invalid=0 send_seq=141739 receive_seq=141739 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.1 pwm=0.395 sd_pos=1272893 sysload=0.31 cputime=213.401 memavail=7288892 print_time=3996.132 buffer_time=2.187 print_stall=0 extruder: target=240 temp=240.0 pwm=0.427
Stats 798771.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7453101 bytes_read=1568719 bytes_retransmit=9 bytes_invalid=0 send_seq=141818 receive_seq=141818 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=80.1 pwm=0.454 sd_pos=1273573 sysload=0.31 cputime=213.481 memavail=7288892 print_time=3997.044 buffer_time=2.098 print_stall=0 extruder: target=240 temp=239.9 pwm=0.509
Stats 798772.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7455937 bytes_read=1569293 bytes_retransmit=9 bytes_invalid=0 send_seq=141874 receive_seq=141874 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.1 pwm=0.444 sd_pos=1274514 sysload=0.31 cputime=213.556 memavail=7288892 print_time=3998.016 buffer_time=2.069 print_stall=0 extruder: target=240 temp=240.1 pwm=0.469
Stats 798773.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7460113 bytes_read=1569976 bytes_retransmit=9 bytes_invalid=0 send_seq=141952 receive_seq=141952 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.575 sd_pos=1275709 sysload=0.31 cputime=213.641 memavail=7288892 print_time=3999.248 buffer_time=2.299 print_stall=0 extruder: target=240 temp=239.7 pwm=0.629
Stats 798774.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7463472 bytes_read=1570593 bytes_retransmit=9 bytes_invalid=0 send_seq=142017 receive_seq=142017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992770 heater_bed: target=80 temp=79.9 pwm=0.655 sd_pos=1276712 sysload=0.31 cputime=213.718 memavail=7290104 print_time=4000.129 buffer_time=2.179 print_stall=0 extruder: target=240 temp=240.1 pwm=0.387
Stats 798775.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7466516 bytes_read=1571166 bytes_retransmit=9 bytes_invalid=0 send_seq=142076 receive_seq=142076 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992758 heater_bed: target=80 temp=79.9 pwm=0.577 sd_pos=1277234 sysload=0.29 cputime=213.791 memavail=7290124 print_time=4000.991 buffer_time=2.040 print_stall=0 extruder: target=240 temp=240.1 pwm=0.464
Stats 798776.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7471353 bytes_read=1571894 bytes_retransmit=9 bytes_invalid=0 send_seq=142163 receive_seq=142163 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.394 sd_pos=1278420 sysload=0.29 cputime=213.869 memavail=7290124 print_time=4002.085 buffer_time=2.135 print_stall=0 extruder: target=240 temp=240.4 pwm=0.305
Stats 798777.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7474646 bytes_read=1572507 bytes_retransmit=9 bytes_invalid=0 send_seq=142224 receive_seq=142224 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=79.9 pwm=0.469 sd_pos=1279345 sysload=0.29 cputime=213.921 memavail=7290124 print_time=4003.137 buffer_time=2.186 print_stall=0 extruder: target=240 temp=239.7 pwm=0.606
Stats 798778.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7478083 bytes_read=1573110 bytes_retransmit=9 bytes_invalid=0 send_seq=142289 receive_seq=142289 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=79.9 pwm=0.525 sd_pos=1280243 sysload=0.29 cputime=214.006 memavail=7290124 print_time=4004.310 buffer_time=2.358 print_stall=0 extruder: target=240 temp=240.0 pwm=0.452
Stats 798779.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7481462 bytes_read=1573728 bytes_retransmit=9 bytes_invalid=0 send_seq=142354 receive_seq=142354 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=79.9 pwm=0.429 sd_pos=1281184 sysload=0.29 cputime=214.070 memavail=7290124 print_time=4005.132 buffer_time=2.179 print_stall=0 extruder: target=240 temp=239.8 pwm=0.512
Stats 798780.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7483284 bytes_read=1574210 bytes_retransmit=9 bytes_invalid=0 send_seq=142392 receive_seq=142392 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992736 heater_bed: target=80 temp=79.9 pwm=0.394 sd_pos=1281320 sysload=0.34 cputime=214.135 memavail=7290124 print_time=4005.967 buffer_time=2.014 print_stall=0 extruder: target=240 temp=240.2 pwm=0.381
Stats 798781.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7485000 bytes_read=1574673 bytes_retransmit=9 bytes_invalid=0 send_seq=142429 receive_seq=142429 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=79.9 pwm=0.455 sd_pos=1281485 sysload=0.34 cputime=214.212 memavail=7290124 print_time=4007.330 buffer_time=2.376 print_stall=0 extruder: target=240 temp=240.1 pwm=0.463
Stats 798782.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7485805 bytes_read=1575087 bytes_retransmit=9 bytes_invalid=0 send_seq=142450 receive_seq=142450 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=79.9 pwm=0.402 sd_pos=1281542 sysload=0.34 cputime=214.274 memavail=7290124 print_time=4008.220 buffer_time=2.265 print_stall=0 extruder: target=240 temp=239.9 pwm=0.463
Stats 798783.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7487461 bytes_read=1575554 bytes_retransmit=9 bytes_invalid=0 send_seq=142485 receive_seq=142485 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=80.0 pwm=0.402 sd_pos=1281720 sysload=0.34 cputime=214.336 memavail=7290124 print_time=4009.664 buffer_time=2.709 print_stall=0 extruder: target=240 temp=240.1 pwm=0.436
Stats 798784.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7490813 bytes_read=1576147 bytes_retransmit=9 bytes_invalid=0 send_seq=142548 receive_seq=142548 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=80.0 pwm=0.347 sd_pos=1282123 sysload=0.34 cputime=214.411 memavail=7290020 print_time=4010.437 buffer_time=2.481 print_stall=0 extruder: target=240 temp=240.1 pwm=0.444
Stats 798785.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7494560 bytes_read=1576815 bytes_retransmit=9 bytes_invalid=0 send_seq=142622 receive_seq=142622 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.352 sd_pos=1282621 sysload=0.32 cputime=214.492 memavail=7290112 print_time=4011.135 buffer_time=2.178 print_stall=0 extruder: target=240 temp=240.1 pwm=0.425
Stats 798786.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7498234 bytes_read=1577426 bytes_retransmit=9 bytes_invalid=0 send_seq=142690 receive_seq=142690 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=3089 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=1283617 sysload=0.32 cputime=214.585 memavail=7290112 print_time=4012.530 buffer_time=2.572 print_stall=0 extruder: target=240 temp=239.7 pwm=0.584
Stats 798787.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7503224 bytes_read=1578144 bytes_retransmit=9 bytes_invalid=0 send_seq=142775 receive_seq=142775 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1778 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.346 sd_pos=1284117 sysload=0.32 cputime=214.687 memavail=7290112 print_time=4013.228 buffer_time=2.269 print_stall=0 extruder: target=240 temp=239.8 pwm=0.535
Stats 798788.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7508368 bytes_read=1578876 bytes_retransmit=9 bytes_invalid=0 send_seq=142861 receive_seq=142860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2561 freq=119992765 heater_bed: target=80 temp=80.1 pwm=0.339 sd_pos=1284936 sysload=0.32 cputime=214.806 memavail=7289892 print_time=4014.586 buffer_time=2.626 print_stall=0 extruder: target=240 temp=239.9 pwm=0.420
Stats 798789.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7512165 bytes_read=1579494 bytes_retransmit=9 bytes_invalid=0 send_seq=142928 receive_seq=142928 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.1 pwm=0.339 sd_pos=1285228 sysload=0.32 cputime=214.888 memavail=7289892 print_time=4014.983 buffer_time=2.023 print_stall=0 extruder: target=240 temp=239.8 pwm=0.537
Stats 798790.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7514911 bytes_read=1580037 bytes_retransmit=9 bytes_invalid=0 send_seq=142981 receive_seq=142981 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.1 pwm=0.404 sd_pos=1285773 sysload=0.29 cputime=214.954 memavail=7289892 print_time=4016.311 buffer_time=2.350 print_stall=0 extruder: target=240 temp=240.0 pwm=0.407
Stats 798791.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7520280 bytes_read=1580834 bytes_retransmit=9 bytes_invalid=0 send_seq=143079 receive_seq=143079 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.1 pwm=0.484 sd_pos=1286758 sysload=0.29 cputime=215.034 memavail=7289892 print_time=4017.815 buffer_time=2.853 print_stall=0 extruder: target=240 temp=240.1 pwm=0.361
Stats 798792.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7522017 bytes_read=1581323 bytes_retransmit=9 bytes_invalid=0 send_seq=143118 receive_seq=143118 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.1 pwm=0.390 sd_pos=1287642 sysload=0.29 cputime=215.101 memavail=7289892 print_time=4018.195 buffer_time=2.232 print_stall=0 extruder: target=240 temp=240.0 pwm=0.446
Stats 798793.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7525578 bytes_read=1581936 bytes_retransmit=9 bytes_invalid=0 send_seq=143185 receive_seq=143185 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.1 pwm=0.356 sd_pos=1289120 sysload=0.29 cputime=215.177 memavail=7289892 print_time=4019.253 buffer_time=2.290 print_stall=0 extruder: target=240 temp=240.1 pwm=0.427
Stats 798794.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7529249 bytes_read=1582588 bytes_retransmit=9 bytes_invalid=0 send_seq=143254 receive_seq=143254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.1 pwm=0.432 sd_pos=1290133 sysload=0.29 cputime=215.258 memavail=7289892 print_time=4020.448 buffer_time=2.485 print_stall=0 extruder: target=240 temp=239.9 pwm=0.508
Stats 798795.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7532923 bytes_read=1583196 bytes_retransmit=9 bytes_invalid=0 send_seq=143320 receive_seq=143320 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.1 pwm=0.448 sd_pos=1290716 sysload=0.35 cputime=215.334 memavail=7289892 print_time=4021.401 buffer_time=2.437 print_stall=0 extruder: target=240 temp=240.2 pwm=0.393
Stats 798796.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7536195 bytes_read=1583784 bytes_retransmit=9 bytes_invalid=0 send_seq=143382 receive_seq=143382 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.1 pwm=0.431 sd_pos=1291218 sysload=0.35 cputime=215.406 memavail=7289892 print_time=4022.080 buffer_time=2.115 print_stall=0 extruder: target=240 temp=240.4 pwm=0.277
Stats 798797.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7539843 bytes_read=1584452 bytes_retransmit=9 bytes_invalid=0 send_seq=143451 receive_seq=143451 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=1292796 sysload=0.35 cputime=215.484 memavail=7289444 print_time=4023.296 buffer_time=2.330 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 798798.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7542874 bytes_read=1585020 bytes_retransmit=9 bytes_invalid=0 send_seq=143509 receive_seq=143509 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=1293343 sysload=0.35 cputime=215.556 memavail=7289196 print_time=4024.211 buffer_time=2.244 print_stall=0 extruder: target=240 temp=240.1 pwm=0.401
Stats 798799.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7547510 bytes_read=1585718 bytes_retransmit=9 bytes_invalid=0 send_seq=143593 receive_seq=143593 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.518 sd_pos=1294367 sysload=0.35 cputime=215.638 memavail=7289196 print_time=4025.392 buffer_time=2.425 print_stall=0 extruder: target=240 temp=240.2 pwm=0.366
Stats 798800.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7551266 bytes_read=1586365 bytes_retransmit=9 bytes_invalid=0 send_seq=143661 receive_seq=143661 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992729 heater_bed: target=80 temp=80.0 pwm=0.518 sd_pos=1295013 sysload=0.32 cputime=215.716 memavail=7289196 print_time=4026.163 buffer_time=2.196 print_stall=0 extruder: target=240 temp=239.9 pwm=0.439
Stats 798801.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7555105 bytes_read=1586998 bytes_retransmit=9 bytes_invalid=0 send_seq=143732 receive_seq=143732 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=79.9 pwm=0.533 sd_pos=1296200 sysload=0.32 cputime=215.794 memavail=7289196 print_time=4027.414 buffer_time=2.445 print_stall=0 extruder: target=240 temp=239.7 pwm=0.550
Stats 798802.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7557440 bytes_read=1587527 bytes_retransmit=9 bytes_invalid=0 send_seq=143779 receive_seq=143779 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992722 heater_bed: target=80 temp=80.0 pwm=0.512 sd_pos=1296753 sysload=0.32 cputime=215.851 memavail=7289196 print_time=4028.021 buffer_time=2.051 print_stall=0 extruder: target=240 temp=239.9 pwm=0.472
Stats 798803.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7562031 bytes_read=1588259 bytes_retransmit=9 bytes_invalid=0 send_seq=143864 receive_seq=143864 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992720 heater_bed: target=80 temp=79.9 pwm=0.457 sd_pos=1298018 sysload=0.32 cputime=215.931 memavail=7289196 print_time=4029.410 buffer_time=2.440 print_stall=0 extruder: target=240 temp=239.9 pwm=0.504
Stats 798804.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7563744 bytes_read=1588727 bytes_retransmit=9 bytes_invalid=0 send_seq=143902 receive_seq=143902 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992716 heater_bed: target=80 temp=79.9 pwm=0.535 sd_pos=1298155 sysload=0.32 cputime=215.985 memavail=7289196 print_time=4030.247 buffer_time=2.277 print_stall=0 extruder: target=240 temp=240.1 pwm=0.377
Stats 798805.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7564914 bytes_read=1589145 bytes_retransmit=9 bytes_invalid=0 send_seq=143930 receive_seq=143930 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992713 heater_bed: target=80 temp=79.9 pwm=0.469 sd_pos=1298222 sysload=0.29 cputime=216.032 memavail=7289196 print_time=4031.151 buffer_time=2.180 print_stall=0 extruder: target=240 temp=239.9 pwm=0.508
Stats 798806.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7566324 bytes_read=1589617 bytes_retransmit=9 bytes_invalid=0 send_seq=143963 receive_seq=143963 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992710 heater_bed: target=80 temp=79.9 pwm=0.514 sd_pos=1298389 sysload=0.29 cputime=216.085 memavail=7289196 print_time=4032.500 buffer_time=2.529 print_stall=0 extruder: target=240 temp=240.0 pwm=0.451
Stats 798807.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=7567471 bytes_read=1590046 bytes_retransmit=9 bytes_invalid=0 send_seq=143990 receive_seq=143990 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=79.9 pwm=0.483 sd_pos=1298457 sysload=0.29 cputime=216.134 memavail=7289196 print_time=4033.090 buffer_time=2.119 print_stall=0 extruder: target=240 temp=240.1 pwm=0.357
Stats 798808.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=7571260 bytes_read=1590700 bytes_retransmit=9 bytes_invalid=0 send_seq=144063 receive_seq=144063 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992728 heater_bed: target=80 temp=79.9 pwm=0.417 sd_pos=1299068 sysload=0.29 cputime=216.203 memavail=7289640 print_time=4034.656 buffer_time=2.683 print_stall=0 extruder: target=240 temp=240.0 pwm=0.430
Stats 798809.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=7574851 bytes_read=1591347 bytes_retransmit=9 bytes_invalid=0 send_seq=144131 receive_seq=144131 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1299679 sysload=0.29 cputime=216.265 memavail=7289708 print_time=4035.325 buffer_time=2.352 print_stall=0 extruder: target=240 temp=239.9 pwm=0.419
Stats 798810.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=7577728 bytes_read=1591895 bytes_retransmit=9 bytes_invalid=0 send_seq=144185 receive_seq=144185 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=549 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=1300286 sysload=0.27 cputime=216.330 memavail=7289484 print_time=4035.993 buffer_time=2.019 print_stall=0 extruder: target=240 temp=240.3 pwm=0.357
Stats 798811.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=7582523 bytes_read=1592578 bytes_retransmit=9 bytes_invalid=0 send_seq=144266 receive_seq=144266 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=2406 freq=119992728 heater_bed: target=80 temp=80.0 pwm=0.419 sd_pos=1301507 sysload=0.27 cputime=216.437 memavail=7289484 print_time=4037.330 buffer_time=2.356 print_stall=0 extruder: target=240 temp=240.2 pwm=0.357
Stats 798812.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7587812 bytes_read=1593346 bytes_retransmit=9 bytes_invalid=0 send_seq=144355 receive_seq=144355 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=655 freq=119992731 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=1302116 sysload=0.27 cputime=216.529 memavail=7289484 print_time=4037.999 buffer_time=2.024 print_stall=0 extruder: target=240 temp=240.0 pwm=0.510
Stats 798813.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7592144 bytes_read=1593999 bytes_retransmit=9 bytes_invalid=0 send_seq=144430 receive_seq=144430 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=1302725 sysload=0.27 cputime=216.621 memavail=7289484 print_time=4039.103 buffer_time=2.128 print_stall=0 extruder: target=240 temp=240.0 pwm=0.450
Stats 798814.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7594872 bytes_read=1594552 bytes_retransmit=9 bytes_invalid=0 send_seq=144485 receive_seq=144485 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992729 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=1303266 sysload=0.27 cputime=216.701 memavail=7288876 print_time=4040.416 buffer_time=2.441 print_stall=0 extruder: target=240 temp=239.8 pwm=0.527
Stats 798815.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7596898 bytes_read=1595079 bytes_retransmit=9 bytes_invalid=0 send_seq=144529 receive_seq=144529 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1303826 sysload=0.25 cputime=216.770 memavail=7289184 print_time=4041.001 buffer_time=2.024 print_stall=0 extruder: target=240 temp=239.8 pwm=0.441
Stats 798816.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=7602577 bytes_read=1595862 bytes_retransmit=9 bytes_invalid=0 send_seq=144630 receive_seq=144630 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.1 pwm=0.339 sd_pos=1305045 sysload=0.25 cputime=216.830 memavail=7289184 print_time=4042.414 buffer_time=2.437 print_stall=0 extruder: target=240 temp=240.1 pwm=0.364
Stats 798817.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7604692 bytes_read=1596376 bytes_retransmit=9 bytes_invalid=0 send_seq=144674 receive_seq=144674 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992718 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=1305628 sysload=0.25 cputime=216.896 memavail=7289184 print_time=4043.148 buffer_time=2.171 print_stall=0 extruder: target=240 temp=240.2 pwm=0.350
Stats 798818.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7608929 bytes_read=1597073 bytes_retransmit=9 bytes_invalid=0 send_seq=144752 receive_seq=144752 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992712 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=1306947 sysload=0.25 cputime=216.967 memavail=7288932 print_time=4044.239 buffer_time=2.262 print_stall=0 extruder: target=240 temp=240.4 pwm=0.303
Stats 798819.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7611840 bytes_read=1597636 bytes_retransmit=9 bytes_invalid=0 send_seq=144809 receive_seq=144809 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992709 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=1307729 sysload=0.25 cputime=217.040 memavail=7288936 print_time=4045.202 buffer_time=2.224 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 798820.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7615104 bytes_read=1598241 bytes_retransmit=9 bytes_invalid=0 send_seq=144872 receive_seq=144872 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992709 heater_bed: target=80 temp=80.1 pwm=0.400 sd_pos=1308253 sysload=0.23 cputime=217.120 memavail=7288936 print_time=4046.153 buffer_time=2.175 print_stall=0 extruder: target=240 temp=239.9 pwm=0.507
Stats 798821.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7619040 bytes_read=1598905 bytes_retransmit=9 bytes_invalid=0 send_seq=144948 receive_seq=144948 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992708 heater_bed: target=80 temp=80.1 pwm=0.451 sd_pos=1308873 sysload=0.23 cputime=217.205 memavail=7288936 print_time=4046.997 buffer_time=2.017 print_stall=0 extruder: target=240 temp=239.9 pwm=0.502
Stats 798822.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7622817 bytes_read=1599543 bytes_retransmit=9 bytes_invalid=0 send_seq=145018 receive_seq=145018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.0 pwm=0.557 sd_pos=1309667 sysload=0.23 cputime=217.281 memavail=7288936 print_time=4048.165 buffer_time=2.184 print_stall=0 extruder: target=240 temp=240.0 pwm=0.419
Stats 798823.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7626140 bytes_read=1600156 bytes_retransmit=9 bytes_invalid=0 send_seq=145082 receive_seq=145082 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=1310437 sysload=0.23 cputime=217.352 memavail=7288936 print_time=4049.218 buffer_time=2.237 print_stall=0 extruder: target=240 temp=240.0 pwm=0.398
Stats 798824.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7629527 bytes_read=1600773 bytes_retransmit=9 bytes_invalid=0 send_seq=145147 receive_seq=145147 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=1311462 sysload=0.23 cputime=217.432 memavail=7288936 print_time=4050.156 buffer_time=2.175 print_stall=0 extruder: target=240 temp=239.9 pwm=0.478
Stats 798825.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7634901 bytes_read=1601536 bytes_retransmit=9 bytes_invalid=0 send_seq=145244 receive_seq=145244 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=1415 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.490 sd_pos=1312526 sysload=0.21 cputime=217.523 memavail=7288712 print_time=4051.803 buffer_time=2.821 print_stall=0 extruder: target=240 temp=240.2 pwm=0.324
Stats 798826.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7638242 bytes_read=1602129 bytes_retransmit=9 bytes_invalid=0 send_seq=145304 receive_seq=145304 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=553 freq=119992774 heater_bed: target=80 temp=79.9 pwm=0.578 sd_pos=1313153 sysload=0.21 cputime=217.616 memavail=7288712 print_time=4052.356 buffer_time=2.373 print_stall=0 extruder: target=240 temp=240.2 pwm=0.433
Stats 798827.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=7642020 bytes_read=1602782 bytes_retransmit=9 bytes_invalid=0 send_seq=145373 receive_seq=145373 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=224 freq=119992772 heater_bed: target=80 temp=79.9 pwm=0.504 sd_pos=1314291 sysload=0.21 cputime=217.708 memavail=7288712 print_time=4053.475 buffer_time=2.492 print_stall=0 extruder: target=240 temp=240.1 pwm=0.505
Stats 798828.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=7644191 bytes_read=1603280 bytes_retransmit=9 bytes_invalid=0 send_seq=145417 receive_seq=145417 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=79.9 pwm=0.489 sd_pos=1314636 sysload=0.21 cputime=217.785 memavail=7288208 print_time=4054.024 buffer_time=2.041 print_stall=0 extruder: target=240 temp=239.8 pwm=0.562
Stats 798829.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=7648697 bytes_read=1603978 bytes_retransmit=9 bytes_invalid=0 send_seq=145498 receive_seq=145498 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=79.9 pwm=0.489 sd_pos=1315864 sysload=0.21 cputime=217.863 memavail=7288208 print_time=4055.430 buffer_time=2.446 print_stall=0 extruder: target=240 temp=239.9 pwm=0.443
Stats 798830.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=7650442 bytes_read=1604460 bytes_retransmit=9 bytes_invalid=0 send_seq=145536 receive_seq=145536 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=79.9 pwm=0.439 sd_pos=1316000 sysload=0.19 cputime=217.936 memavail=7288208 print_time=4056.274 buffer_time=2.289 print_stall=0 extruder: target=240 temp=240.2 pwm=0.363
Stats 798831.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=7651659 bytes_read=1604888 bytes_retransmit=9 bytes_invalid=0 send_seq=145566 receive_seq=145566 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=80 temp=79.9 pwm=0.449 sd_pos=1316055 sysload=0.19 cputime=218.001 memavail=7288208 print_time=4057.178 buffer_time=2.192 print_stall=0 extruder: target=240 temp=239.9 pwm=0.504
Stats 798832.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7653014 bytes_read=1605347 bytes_retransmit=9 bytes_invalid=0 send_seq=145596 receive_seq=145596 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=79.9 pwm=0.398 sd_pos=1316222 sysload=0.19 cputime=218.063 memavail=7288208 print_time=4058.527 buffer_time=2.541 print_stall=0 extruder: target=240 temp=240.0 pwm=0.402
Stats 798833.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7654176 bytes_read=1605784 bytes_retransmit=9 bytes_invalid=0 send_seq=145625 receive_seq=145625 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=79.9 pwm=0.413 sd_pos=1316278 sysload=0.19 cputime=218.131 memavail=7288208 print_time=4059.117 buffer_time=2.130 print_stall=0 extruder: target=240 temp=240.0 pwm=0.490
Stats 798834.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7657938 bytes_read=1606372 bytes_retransmit=9 bytes_invalid=0 send_seq=145697 receive_seq=145687 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=1316945 sysload=0.19 cputime=218.216 memavail=7288208 print_time=4060.687 buffer_time=2.693 print_stall=0 extruder: target=240 temp=239.9 pwm=0.498
Stats 798835.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7661758 bytes_read=1607080 bytes_retransmit=9 bytes_invalid=0 send_seq=145770 receive_seq=145770 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=1317670 sysload=0.18 cputime=218.288 memavail=7288208 print_time=4061.360 buffer_time=2.365 print_stall=0 extruder: target=240 temp=240.1 pwm=0.413
Stats 798836.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7664377 bytes_read=1607627 bytes_retransmit=9 bytes_invalid=0 send_seq=145821 receive_seq=145821 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=880 freq=119992741 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=1318394 sysload=0.18 cputime=218.359 memavail=7288208 print_time=4062.032 buffer_time=2.038 print_stall=0 extruder: target=240 temp=240.0 pwm=0.438
Stats 798837.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7669241 bytes_read=1608341 bytes_retransmit=9 bytes_invalid=0 send_seq=145905 receive_seq=145905 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=2866 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.332 sd_pos=1319843 sysload=0.18 cputime=218.475 memavail=7288208 print_time=4063.377 buffer_time=2.382 print_stall=0 extruder: target=240 temp=240.1 pwm=0.421
Stats 798838.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7674717 bytes_read=1609104 bytes_retransmit=9 bytes_invalid=0 send_seq=145999 receive_seq=145999 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1149 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.384 sd_pos=1320568 sysload=0.18 cputime=218.584 memavail=7287896 print_time=4064.050 buffer_time=2.055 print_stall=0 extruder: target=240 temp=239.9 pwm=0.426
Stats 798839.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7679903 bytes_read=1609841 bytes_retransmit=9 bytes_invalid=0 send_seq=146088 receive_seq=146088 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=585 freq=119992734 heater_bed: target=80 temp=80.1 pwm=0.323 sd_pos=1321880 sysload=0.18 cputime=218.699 memavail=7287956 print_time=4065.333 buffer_time=2.336 print_stall=0 extruder: target=240 temp=240.1 pwm=0.376
Stats 798840.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7682825 bytes_read=1610399 bytes_retransmit=9 bytes_invalid=0 send_seq=146144 receive_seq=146144 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992732 heater_bed: target=80 temp=80.1 pwm=0.387 sd_pos=1322366 sysload=0.16 cputime=218.769 memavail=7287956 print_time=4066.086 buffer_time=2.089 print_stall=0 extruder: target=240 temp=240.1 pwm=0.380
Stats 798841.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7686440 bytes_read=1611037 bytes_retransmit=9 bytes_invalid=0 send_seq=146213 receive_seq=146213 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992729 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=1322924 sysload=0.16 cputime=218.841 memavail=7287956 print_time=4067.405 buffer_time=2.407 print_stall=0 extruder: target=240 temp=239.8 pwm=0.504
Stats 798842.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7689880 bytes_read=1611685 bytes_retransmit=9 bytes_invalid=0 send_seq=146281 receive_seq=146281 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.1 pwm=0.402 sd_pos=1323326 sysload=0.16 cputime=218.906 memavail=7288208 print_time=4068.290 buffer_time=2.292 print_stall=0 extruder: target=240 temp=239.9 pwm=0.442
Stats 798843.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7693622 bytes_read=1612313 bytes_retransmit=9 bytes_invalid=0 send_seq=146351 receive_seq=146351 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=1324133 sysload=0.16 cputime=218.976 memavail=7288208 print_time=4069.260 buffer_time=2.262 print_stall=0 extruder: target=240 temp=239.9 pwm=0.456
Stats 798844.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7695507 bytes_read=1612806 bytes_retransmit=9 bytes_invalid=0 send_seq=146391 receive_seq=146391 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=1324624 sysload=0.16 cputime=219.051 memavail=7288088 print_time=4069.903 buffer_time=1.905 print_stall=0 extruder: target=240 temp=240.1 pwm=0.392
Stats 798845.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7700469 bytes_read=1613548 bytes_retransmit=9 bytes_invalid=0 send_seq=146481 receive_seq=146481 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.1 pwm=0.387 sd_pos=1325730 sysload=0.15 cputime=219.131 memavail=7288200 print_time=4071.484 buffer_time=2.484 print_stall=0 extruder: target=240 temp=240.2 pwm=0.352
Stats 798846.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7702708 bytes_read=1614056 bytes_retransmit=9 bytes_invalid=0 send_seq=146527 receive_seq=146527 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.481 sd_pos=1326133 sysload=0.15 cputime=219.197 memavail=7288200 print_time=4072.062 buffer_time=2.062 print_stall=0 extruder: target=240 temp=240.1 pwm=0.465
Stats 798847.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7708774 bytes_read=1614910 bytes_retransmit=9 bytes_invalid=0 send_seq=146636 receive_seq=146636 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=819 freq=119992801 heater_bed: target=80 temp=80.1 pwm=0.421 sd_pos=1327491 sysload=0.15 cputime=219.288 memavail=7288200 print_time=4073.655 buffer_time=2.654 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 798848.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7710933 bytes_read=1615412 bytes_retransmit=9 bytes_invalid=0 send_seq=146678 receive_seq=146678 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.1 pwm=0.421 sd_pos=1327797 sysload=0.15 cputime=219.362 memavail=7287992 print_time=4074.011 buffer_time=2.009 print_stall=0 extruder: target=240 temp=240.1 pwm=0.402
Stats 798849.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7714819 bytes_read=1616055 bytes_retransmit=9 bytes_invalid=0 send_seq=146751 receive_seq=146751 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1329040 sysload=0.15 cputime=219.440 memavail=7287976 print_time=4075.180 buffer_time=2.178 print_stall=0 extruder: target=240 temp=240.0 pwm=0.478
Stats 798850.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7717540 bytes_read=1616618 bytes_retransmit=9 bytes_invalid=0 send_seq=146805 receive_seq=146805 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.509 sd_pos=1329559 sysload=0.22 cputime=219.514 memavail=7287976 print_time=4076.068 buffer_time=2.065 print_stall=0 extruder: target=240 temp=239.7 pwm=0.592
Stats 798851.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7721983 bytes_read=1617320 bytes_retransmit=9 bytes_invalid=0 send_seq=146887 receive_seq=146887 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=1330288 sysload=0.22 cputime=219.589 memavail=7287976 print_time=4077.235 buffer_time=2.231 print_stall=0 extruder: target=240 temp=240.0 pwm=0.413
Stats 798852.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7726019 bytes_read=1617984 bytes_retransmit=9 bytes_invalid=0 send_seq=146961 receive_seq=146961 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.558 sd_pos=1331050 sysload=0.22 cputime=219.676 memavail=7287976 print_time=4078.110 buffer_time=2.105 print_stall=0 extruder: target=240 temp=240.1 pwm=0.382
Stats 798853.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7730436 bytes_read=1618667 bytes_retransmit=9 bytes_invalid=0 send_seq=147039 receive_seq=147039 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=888 freq=119992783 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=1332404 sysload=0.22 cputime=219.782 memavail=7287976 print_time=4079.472 buffer_time=2.466 print_stall=0 extruder: target=240 temp=240.2 pwm=0.401
Stats 798854.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7734473 bytes_read=1619314 bytes_retransmit=9 bytes_invalid=0 send_seq=147110 receive_seq=147110 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=79.9 pwm=0.547 sd_pos=1333237 sysload=0.22 cputime=219.870 memavail=7287976 print_time=4080.342 buffer_time=2.335 print_stall=0 extruder: target=240 temp=239.9 pwm=0.509
Stats 798855.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7737127 bytes_read=1619862 bytes_retransmit=9 bytes_invalid=0 send_seq=147164 receive_seq=147164 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=79.9 pwm=0.637 sd_pos=1333900 sysload=0.28 cputime=219.938 memavail=7287976 print_time=4081.065 buffer_time=2.058 print_stall=0 extruder: target=240 temp=240.1 pwm=0.458
Stats 798856.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7742066 bytes_read=1620610 bytes_retransmit=9 bytes_invalid=0 send_seq=147256 receive_seq=147256 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=79.9 pwm=0.419 sd_pos=1334558 sysload=0.28 cputime=220.014 memavail=7287976 print_time=4082.626 buffer_time=2.618 print_stall=0 extruder: target=240 temp=239.9 pwm=0.508
Stats 798857.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7744621 bytes_read=1621164 bytes_retransmit=9 bytes_invalid=0 send_seq=147307 receive_seq=147307 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=79.9 pwm=0.476 sd_pos=1335246 sysload=0.28 cputime=220.067 memavail=7287752 print_time=4083.232 buffer_time=2.224 print_stall=0 extruder: target=240 temp=239.9 pwm=0.422
Stats 798858.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7746407 bytes_read=1621627 bytes_retransmit=9 bytes_invalid=0 send_seq=147345 receive_seq=147345 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=79.9 pwm=0.476 sd_pos=1335300 sysload=0.28 cputime=220.129 memavail=7287276 print_time=4084.437 buffer_time=2.428 print_stall=0 extruder: target=240 temp=239.8 pwm=0.466
Stats 798859.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7747204 bytes_read=1622030 bytes_retransmit=9 bytes_invalid=0 send_seq=147367 receive_seq=147367 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=79.9 pwm=0.387 sd_pos=1335439 sysload=0.28 cputime=220.186 memavail=7287280 print_time=4085.079 buffer_time=2.070 print_stall=0 extruder: target=240 temp=240.3 pwm=0.294
Stats 798860.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7748525 bytes_read=1622447 bytes_retransmit=9 bytes_invalid=0 send_seq=147399 receive_seq=147392 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=79.9 pwm=0.416 sd_pos=1335552 sysload=0.26 cputime=220.244 memavail=7287280 print_time=4086.276 buffer_time=2.265 print_stall=0 extruder: target=240 temp=240.4 pwm=0.295
Stats 798861.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7749816 bytes_read=1622905 bytes_retransmit=9 bytes_invalid=0 send_seq=147428 receive_seq=147428 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=79.9 pwm=0.472 sd_pos=1335686 sysload=0.26 cputime=220.301 memavail=7287280 print_time=4087.452 buffer_time=2.440 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 798862.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=7753167 bytes_read=1623538 bytes_retransmit=9 bytes_invalid=0 send_seq=147493 receive_seq=147493 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=80.0 pwm=0.343 sd_pos=1336260 sysload=0.26 cputime=220.362 memavail=7287280 print_time=4088.208 buffer_time=2.195 print_stall=0 extruder: target=240 temp=239.9 pwm=0.496
Stats 798863.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=7758480 bytes_read=1624310 bytes_retransmit=9 bytes_invalid=0 send_seq=147589 receive_seq=147589 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2154 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=1337698 sysload=0.26 cputime=220.437 memavail=7287280 print_time=4089.628 buffer_time=2.615 print_stall=0 extruder: target=240 temp=239.8 pwm=0.496
Stats 798864.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=7761669 bytes_read=1624883 bytes_retransmit=9 bytes_invalid=0 send_seq=147648 receive_seq=147648 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=2653 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.388 sd_pos=1338419 sysload=0.26 cputime=220.530 memavail=7287280 print_time=4090.314 buffer_time=2.301 print_stall=0 extruder: target=240 temp=239.8 pwm=0.521
Stats 798865.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=7767165 bytes_read=1625646 bytes_retransmit=9 bytes_invalid=0 send_seq=147742 receive_seq=147742 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=1149 freq=119992781 heater_bed: target=80 temp=80.1 pwm=0.411 sd_pos=1339167 sysload=0.24 cputime=220.631 memavail=7287280 print_time=4091.017 buffer_time=2.003 print_stall=0 extruder: target=240 temp=239.8 pwm=0.536
Stats 798866.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=7772639 bytes_read=1626403 bytes_retransmit=9 bytes_invalid=0 send_seq=147835 receive_seq=147835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2258 freq=119992776 heater_bed: target=80 temp=80.1 pwm=0.346 sd_pos=1340129 sysload=0.24 cputime=220.736 memavail=7287280 print_time=4092.423 buffer_time=2.408 print_stall=0 extruder: target=240 temp=240.1 pwm=0.370
Stats 798867.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7777802 bytes_read=1627137 bytes_retransmit=9 bytes_invalid=0 send_seq=147923 receive_seq=147923 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=199 freq=119992771 heater_bed: target=80 temp=80.1 pwm=0.346 sd_pos=1340351 sysload=0.24 cputime=220.832 memavail=7287280 print_time=4093.234 buffer_time=2.219 print_stall=0 extruder: target=240 temp=240.1 pwm=0.370
Stats 798868.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7782470 bytes_read=1627855 bytes_retransmit=9 bytes_invalid=0 send_seq=148008 receive_seq=148008 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=80.1 pwm=0.356 sd_pos=1341405 sysload=0.24 cputime=220.925 memavail=7286968 print_time=4094.553 buffer_time=2.537 print_stall=0 extruder: target=240 temp=240.4 pwm=0.311
Stats 798869.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7784750 bytes_read=1628392 bytes_retransmit=9 bytes_invalid=0 send_seq=148058 receive_seq=148057 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.1 pwm=0.386 sd_pos=1341965 sysload=0.24 cputime=220.989 memavail=7287032 print_time=4095.191 buffer_time=2.174 print_stall=0 extruder: target=240 temp=240.1 pwm=0.419
Stats 798870.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7788411 bytes_read=1629026 bytes_retransmit=9 bytes_invalid=0 send_seq=148126 receive_seq=148126 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.1 pwm=0.483 sd_pos=1342518 sysload=0.22 cputime=221.062 memavail=7287032 print_time=4096.614 buffer_time=2.597 print_stall=0 extruder: target=240 temp=239.8 pwm=0.522
Stats 798871.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7792185 bytes_read=1629679 bytes_retransmit=9 bytes_invalid=0 send_seq=148198 receive_seq=148198 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.1 pwm=0.355 sd_pos=1343024 sysload=0.22 cputime=221.135 memavail=7287032 print_time=4097.589 buffer_time=2.572 print_stall=0 extruder: target=240 temp=239.8 pwm=0.515
Stats 798872.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7794587 bytes_read=1630237 bytes_retransmit=9 bytes_invalid=0 send_seq=148248 receive_seq=148248 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=1343412 sysload=0.22 cputime=221.201 memavail=7287032 print_time=4098.147 buffer_time=2.129 print_stall=0 extruder: target=240 temp=239.8 pwm=0.477
Stats 798873.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7798039 bytes_read=1630845 bytes_retransmit=9 bytes_invalid=0 send_seq=148314 receive_seq=148314 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.1 pwm=0.350 sd_pos=1344489 sysload=0.22 cputime=221.273 memavail=7287032 print_time=4099.216 buffer_time=2.198 print_stall=0 extruder: target=240 temp=240.0 pwm=0.459
Stats 798874.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7800985 bytes_read=1631433 bytes_retransmit=9 bytes_invalid=0 send_seq=148373 receive_seq=148373 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=1345511 sysload=0.22 cputime=221.366 memavail=7289232 print_time=4099.970 buffer_time=1.950 print_stall=0 extruder: target=240 temp=240.5 pwm=0.291
Stats 798875.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7805253 bytes_read=1632130 bytes_retransmit=9 bytes_invalid=0 send_seq=148454 receive_seq=148454 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.1 pwm=0.445 sd_pos=1346573 sysload=0.20 cputime=221.443 memavail=7289460 print_time=4101.329 buffer_time=2.309 print_stall=0 extruder: target=240 temp=240.3 pwm=0.391
Stats 798876.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7808221 bytes_read=1632703 bytes_retransmit=9 bytes_invalid=0 send_seq=148513 receive_seq=148513 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.1 pwm=0.462 sd_pos=1347199 sysload=0.20 cputime=221.510 memavail=7289460 print_time=4102.124 buffer_time=2.103 print_stall=0 extruder: target=240 temp=240.1 pwm=0.455
Stats 798877.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7813561 bytes_read=1633492 bytes_retransmit=9 bytes_invalid=0 send_seq=148609 receive_seq=148609 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=1348455 sysload=0.20 cputime=221.597 memavail=7289460 print_time=4103.356 buffer_time=2.335 print_stall=0 extruder: target=240 temp=239.8 pwm=0.564
Stats 798878.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7815889 bytes_read=1634024 bytes_retransmit=9 bytes_invalid=0 send_seq=148657 receive_seq=148657 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=80.1 pwm=0.434 sd_pos=1349007 sysload=0.20 cputime=221.665 memavail=7289400 print_time=4104.087 buffer_time=2.065 print_stall=0 extruder: target=240 temp=239.9 pwm=0.460
Stats 798879.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7820580 bytes_read=1634732 bytes_retransmit=9 bytes_invalid=0 send_seq=148743 receive_seq=148743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.0 pwm=0.588 sd_pos=1350587 sysload=0.20 cputime=221.747 memavail=7289460 print_time=4105.535 buffer_time=2.513 print_stall=0 extruder: target=240 temp=240.0 pwm=0.460
Stats 798880.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7823427 bytes_read=1635305 bytes_retransmit=9 bytes_invalid=0 send_seq=148799 receive_seq=148799 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.481 sd_pos=1351381 sysload=0.18 cputime=221.813 memavail=7289460 print_time=4106.238 buffer_time=2.215 print_stall=0 extruder: target=240 temp=239.9 pwm=0.460
Stats 798881.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7828814 bytes_read=1636093 bytes_retransmit=9 bytes_invalid=0 send_seq=148899 receive_seq=148895 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1188 freq=119992779 heater_bed: target=80 temp=80.0 pwm=0.599 sd_pos=1352903 sysload=0.18 cputime=221.912 memavail=7289460 print_time=4107.828 buffer_time=2.802 print_stall=0 extruder: target=240 temp=239.9 pwm=0.492
Stats 798882.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7831983 bytes_read=1636676 bytes_retransmit=9 bytes_invalid=0 send_seq=148956 receive_seq=148956 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=861 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=1353353 sysload=0.18 cputime=221.991 memavail=7289460 print_time=4108.448 buffer_time=2.421 print_stall=0 extruder: target=240 temp=240.4 pwm=0.320
Stats 798883.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7835459 bytes_read=1637284 bytes_retransmit=9 bytes_invalid=0 send_seq=149019 receive_seq=149019 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=79.9 pwm=0.511 sd_pos=1354022 sysload=0.18 cputime=222.080 memavail=7289460 print_time=4109.068 buffer_time=2.041 print_stall=0 extruder: target=240 temp=240.2 pwm=0.395
Stats 798884.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7840376 bytes_read=1638011 bytes_retransmit=9 bytes_invalid=0 send_seq=149106 receive_seq=149106 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=79.9 pwm=0.511 sd_pos=1355240 sysload=0.18 cputime=222.171 memavail=7289460 print_time=4110.464 buffer_time=2.436 print_stall=0 extruder: target=240 temp=240.0 pwm=0.473
Stats 798885.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7844450 bytes_read=1638674 bytes_retransmit=9 bytes_invalid=0 send_seq=149183 receive_seq=149183 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=79.9 pwm=0.509 sd_pos=1356070 sysload=0.17 cputime=222.250 memavail=7289460 print_time=4111.824 buffer_time=2.795 print_stall=0 extruder: target=240 temp=239.8 pwm=0.547
Stats 798886.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7848097 bytes_read=1639338 bytes_retransmit=9 bytes_invalid=0 send_seq=149254 receive_seq=149254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=69 freq=119992779 heater_bed: target=80 temp=79.9 pwm=0.444 sd_pos=1356561 sysload=0.17 cputime=222.330 memavail=7289460 print_time=4112.734 buffer_time=2.705 print_stall=0 extruder: target=240 temp=239.9 pwm=0.428
Stats 798887.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7850949 bytes_read=1639910 bytes_retransmit=9 bytes_invalid=0 send_seq=149310 receive_seq=149310 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=80 temp=80.0 pwm=0.375 sd_pos=1357416 sysload=0.17 cputime=222.408 memavail=7289460 print_time=4113.394 buffer_time=2.363 print_stall=0 extruder: target=240 temp=240.1 pwm=0.357
Stats 798888.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7853205 bytes_read=1640418 bytes_retransmit=9 bytes_invalid=0 send_seq=149356 receive_seq=149356 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=80 temp=80.0 pwm=0.394 sd_pos=1357981 sysload=0.17 cputime=222.479 memavail=7289656 print_time=4114.056 buffer_time=2.025 print_stall=0 extruder: target=240 temp=240.2 pwm=0.337
Stats 798889.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7858339 bytes_read=1641176 bytes_retransmit=9 bytes_invalid=0 send_seq=149449 receive_seq=149449 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=80.0 pwm=0.374 sd_pos=1359063 sysload=0.17 cputime=222.566 memavail=7289716 print_time=4115.548 buffer_time=2.516 print_stall=0 extruder: target=240 temp=240.1 pwm=0.395
Stats 798890.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7860691 bytes_read=1641713 bytes_retransmit=9 bytes_invalid=0 send_seq=149498 receive_seq=149498 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992840 heater_bed: target=80 temp=80.0 pwm=0.354 sd_pos=1359776 sysload=0.24 cputime=222.639 memavail=7289716 print_time=4116.188 buffer_time=2.155 print_stall=0 extruder: target=240 temp=239.7 pwm=0.572
Stats 798891.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7865796 bytes_read=1642456 bytes_retransmit=9 bytes_invalid=0 send_seq=149591 receive_seq=149591 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992828 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=1361242 sysload=0.24 cputime=222.724 memavail=7289716 print_time=4117.328 buffer_time=2.293 print_stall=0 extruder: target=240 temp=239.8 pwm=0.523
Stats 798892.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7868933 bytes_read=1643064 bytes_retransmit=9 bytes_invalid=0 send_seq=149652 receive_seq=149652 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992825 heater_bed: target=80 temp=80.1 pwm=0.347 sd_pos=1362227 sysload=0.24 cputime=222.798 memavail=7289716 print_time=4118.148 buffer_time=2.112 print_stall=0 extruder: target=240 temp=240.1 pwm=0.404
Stats 798893.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7873820 bytes_read=1643723 bytes_retransmit=9 bytes_invalid=0 send_seq=149739 receive_seq=149727 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=100 upcoming_bytes=921 freq=119992819 heater_bed: target=80 temp=80.1 pwm=0.347 sd_pos=1365028 sysload=0.24 cputime=222.906 memavail=7289716 print_time=4119.471 buffer_time=2.423 print_stall=0 extruder: target=240 temp=240.3 pwm=0.295
Stats 798894.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7877896 bytes_read=1644413 bytes_retransmit=9 bytes_invalid=0 send_seq=149810 receive_seq=149810 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=470 freq=119992810 heater_bed: target=80 temp=80.1 pwm=0.436 sd_pos=1366241 sysload=0.24 cputime=222.996 memavail=7287448 print_time=4120.240 buffer_time=2.192 print_stall=0 extruder: target=240 temp=240.1 pwm=0.378
Stats 798895.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7881512 bytes_read=1645036 bytes_retransmit=9 bytes_invalid=0 send_seq=149876 receive_seq=149876 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=10 freq=119992850 heater_bed: target=80 temp=80.1 pwm=0.399 sd_pos=1366990 sysload=0.30 cputime=223.083 memavail=7290196 print_time=4121.319 buffer_time=2.270 print_stall=0 extruder: target=240 temp=240.2 pwm=0.373
Stats 798896.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7884973 bytes_read=1645653 bytes_retransmit=9 bytes_invalid=0 send_seq=149941 receive_seq=149941 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992834 heater_bed: target=80 temp=80.1 pwm=0.342 sd_pos=1367699 sysload=0.30 cputime=223.136 memavail=7290196 print_time=4122.331 buffer_time=2.281 print_stall=0 extruder: target=240 temp=240.2 pwm=0.333
Stats 798897.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7888288 bytes_read=1646267 bytes_retransmit=9 bytes_invalid=0 send_seq=150005 receive_seq=150005 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992823 heater_bed: target=80 temp=80.1 pwm=0.366 sd_pos=1368888 sysload=0.30 cputime=223.189 memavail=7290196 print_time=4123.059 buffer_time=2.009 print_stall=0 extruder: target=240 temp=240.1 pwm=0.452
Stats 798898.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7893089 bytes_read=1647000 bytes_retransmit=9 bytes_invalid=0 send_seq=150093 receive_seq=150093 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1088 freq=119992806 heater_bed: target=80 temp=80.1 pwm=0.397 sd_pos=1370181 sysload=0.30 cputime=223.248 memavail=7289972 print_time=4124.559 buffer_time=2.508 print_stall=0 extruder: target=240 temp=239.9 pwm=0.501
Stats 798899.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7897381 bytes_read=1647667 bytes_retransmit=9 bytes_invalid=0 send_seq=150168 receive_seq=150168 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992869 heater_bed: target=80 temp=80.1 pwm=0.397 sd_pos=1370688 sysload=0.30 cputime=223.316 memavail=7289976 print_time=4125.422 buffer_time=2.371 print_stall=0 extruder: target=240 temp=239.8 pwm=0.477
Stats 798900.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7900086 bytes_read=1648210 bytes_retransmit=9 bytes_invalid=0 send_seq=150221 receive_seq=150221 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992855 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=1371214 sysload=0.27 cputime=223.376 memavail=7289976 print_time=4126.295 buffer_time=2.243 print_stall=0 extruder: target=240 temp=239.9 pwm=0.417
Stats 798901.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7904388 bytes_read=1648888 bytes_retransmit=9 bytes_invalid=0 send_seq=150298 receive_seq=150298 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992845 heater_bed: target=80 temp=80.1 pwm=0.340 sd_pos=1371914 sysload=0.27 cputime=223.449 memavail=7289976 print_time=4127.190 buffer_time=2.137 print_stall=0 extruder: target=240 temp=240.1 pwm=0.350
Stats 798902.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7908586 bytes_read=1649581 bytes_retransmit=9 bytes_invalid=0 send_seq=150375 receive_seq=150375 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=349 freq=119992835 heater_bed: target=80 temp=80.1 pwm=0.452 sd_pos=1372630 sysload=0.27 cputime=223.530 memavail=7289976 print_time=4128.512 buffer_time=2.459 print_stall=0 extruder: target=240 temp=240.1 pwm=0.350
Stats 798903.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7912055 bytes_read=1650169 bytes_retransmit=9 bytes_invalid=0 send_seq=150437 receive_seq=150437 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=20 freq=119992825 heater_bed: target=80 temp=80.1 pwm=0.454 sd_pos=1373178 sysload=0.27 cputime=223.604 memavail=7289976 print_time=4129.154 buffer_time=2.100 print_stall=0 extruder: target=240 temp=239.9 pwm=0.513
Stats 798904.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7915399 bytes_read=1650787 bytes_retransmit=9 bytes_invalid=0 send_seq=150502 receive_seq=150502 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=20 freq=119992849 heater_bed: target=80 temp=80.1 pwm=0.387 sd_pos=1373853 sysload=0.27 cputime=223.695 memavail=7290272 print_time=4130.106 buffer_time=2.052 print_stall=0 extruder: target=240 temp=240.2 pwm=0.326
Stats 798905.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7917465 bytes_read=1651294 bytes_retransmit=9 bytes_invalid=0 send_seq=150545 receive_seq=150545 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992838 heater_bed: target=80 temp=80.2 pwm=0.387 sd_pos=1374029 sysload=0.33 cputime=223.756 memavail=7290468 print_time=4131.252 buffer_time=2.197 print_stall=0 extruder: target=240 temp=239.8 pwm=0.525
Stats 798906.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7919158 bytes_read=1651762 bytes_retransmit=9 bytes_invalid=0 send_seq=150583 receive_seq=150583 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=80.1 pwm=0.397 sd_pos=1374168 sysload=0.33 cputime=223.820 memavail=7290468 print_time=4132.342 buffer_time=2.286 print_stall=0 extruder: target=240 temp=240.1 pwm=0.376
Stats 798907.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7920016 bytes_read=1652191 bytes_retransmit=9 bytes_invalid=0 send_seq=150607 receive_seq=150607 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=80 temp=80.1 pwm=0.397 sd_pos=1374225 sysload=0.33 cputime=223.874 memavail=7290468 print_time=4133.271 buffer_time=2.214 print_stall=0 extruder: target=240 temp=240.1 pwm=0.383
Stats 798908.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7921757 bytes_read=1652668 bytes_retransmit=9 bytes_invalid=0 send_seq=150644 receive_seq=150644 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=80 temp=80.1 pwm=0.487 sd_pos=1374403 sysload=0.33 cputime=223.933 memavail=7290216 print_time=4134.715 buffer_time=2.657 print_stall=0 extruder: target=240 temp=239.8 pwm=0.491
Stats 798909.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7925134 bytes_read=1653271 bytes_retransmit=9 bytes_invalid=0 send_seq=150709 receive_seq=150709 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=80 temp=80.1 pwm=0.402 sd_pos=1374945 sysload=0.33 cputime=223.991 memavail=7290216 print_time=4135.464 buffer_time=2.406 print_stall=0 extruder: target=240 temp=239.7 pwm=0.554
Stats 798910.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7929044 bytes_read=1653948 bytes_retransmit=9 bytes_invalid=0 send_seq=150783 receive_seq=150783 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=80 temp=80.1 pwm=0.379 sd_pos=1375458 sysload=0.47 cputime=224.053 memavail=7290216 print_time=4136.205 buffer_time=2.146 print_stall=0 extruder: target=240 temp=240.2 pwm=0.339
Stats 798911.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7932667 bytes_read=1654556 bytes_retransmit=9 bytes_invalid=0 send_seq=150849 receive_seq=150849 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3806 freq=119992789 heater_bed: target=80 temp=80.1 pwm=0.377 sd_pos=1376623 sysload=0.47 cputime=224.139 memavail=7290216 print_time=4137.674 buffer_time=2.614 print_stall=0 extruder: target=240 temp=240.1 pwm=0.446
Stats 798912.6: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7937889 bytes_read=1655305 bytes_retransmit=9 bytes_invalid=0 send_seq=150940 receive_seq=150940 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=1862 freq=119992777 heater_bed: target=80 temp=80.1 pwm=0.378 sd_pos=1377056 sysload=0.47 cputime=224.232 memavail=7290216 print_time=4138.332 buffer_time=2.271 print_stall=0 extruder: target=240 temp=239.9 pwm=0.446
Stats 798913.6: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7941850 bytes_read=1655952 bytes_retransmit=9 bytes_invalid=0 send_seq=151008 receive_seq=151008 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.1 pwm=0.378 sd_pos=1377247 sysload=0.47 cputime=224.329 memavail=7290216 print_time=4139.136 buffer_time=2.074 print_stall=0 extruder: target=240 temp=239.9 pwm=0.448
Stats 798914.6: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7944046 bytes_read=1656450 bytes_retransmit=9 bytes_invalid=0 send_seq=151052 receive_seq=151052 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.1 pwm=0.386 sd_pos=1377520 sysload=0.47 cputime=224.392 memavail=7290224 print_time=4140.165 buffer_time=2.103 print_stall=0 extruder: target=240 temp=239.8 pwm=0.478
Stats 798915.6: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7949751 bytes_read=1657238 bytes_retransmit=9 bytes_invalid=0 send_seq=151154 receive_seq=151154 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.1 pwm=0.395 sd_pos=1378255 sysload=0.83 cputime=224.467 memavail=7290224 print_time=4141.566 buffer_time=2.504 print_stall=0 extruder: target=240 temp=240.0 pwm=0.387
Stats 798916.6: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7951850 bytes_read=1657755 bytes_retransmit=9 bytes_invalid=0 send_seq=151196 receive_seq=151196 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=10 freq=119992777 heater_bed: target=80 temp=80.2 pwm=0.309 sd_pos=1378469 sysload=0.83 cputime=224.525 memavail=7290224 print_time=4142.332 buffer_time=2.269 print_stall=0 extruder: target=240 temp=240.1 pwm=0.387
Stats 798917.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7953833 bytes_read=1658254 bytes_retransmit=9 bytes_invalid=0 send_seq=151237 receive_seq=151237 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992826 heater_bed: target=80 temp=80.2 pwm=0.318 sd_pos=1378688 sysload=0.83 cputime=224.584 memavail=7290000 print_time=4143.320 buffer_time=2.256 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 798918.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7955710 bytes_read=1658732 bytes_retransmit=9 bytes_invalid=0 send_seq=151277 receive_seq=151277 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.2 pwm=0.385 sd_pos=1378907 sysload=0.83 cputime=224.640 memavail=7290000 print_time=4144.139 buffer_time=2.075 print_stall=0 extruder: target=240 temp=239.7 pwm=0.584
Stats 798919.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7959883 bytes_read=1659429 bytes_retransmit=9 bytes_invalid=0 send_seq=151355 receive_seq=151355 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=10 freq=119992801 heater_bed: target=80 temp=80.1 pwm=0.385 sd_pos=1380444 sysload=0.83 cputime=224.722 memavail=7290000 print_time=4145.497 buffer_time=2.432 print_stall=0 extruder: target=240 temp=239.8 pwm=0.446
Stats 798920.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7962722 bytes_read=1659987 bytes_retransmit=9 bytes_invalid=0 send_seq=151411 receive_seq=151411 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992791 heater_bed: target=80 temp=80.1 pwm=0.385 sd_pos=1381025 sysload=1.00 cputime=224.783 memavail=7290000 print_time=4146.289 buffer_time=2.223 print_stall=0 extruder: target=240 temp=239.8 pwm=0.434
Stats 798921.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=7967342 bytes_read=1660695 bytes_retransmit=9 bytes_invalid=0 send_seq=151497 receive_seq=151497 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=80.2 pwm=0.324 sd_pos=1382268 sysload=1.00 cputime=224.868 memavail=7290000 print_time=4147.669 buffer_time=2.603 print_stall=0 extruder: target=240 temp=239.8 pwm=0.434
Stats 798922.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7969934 bytes_read=1661283 bytes_retransmit=9 bytes_invalid=0 send_seq=151550 receive_seq=151550 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=80.2 pwm=0.396 sd_pos=1383329 sysload=1.00 cputime=224.949 memavail=7290000 print_time=4148.258 buffer_time=2.190 print_stall=0 extruder: target=240 temp=239.9 pwm=0.425
Stats 798923.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7973599 bytes_read=1661906 bytes_retransmit=9 bytes_invalid=0 send_seq=151619 receive_seq=151619 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=80.1 pwm=0.396 sd_pos=1384725 sysload=1.00 cputime=225.023 memavail=7290000 print_time=4149.096 buffer_time=2.028 print_stall=0 extruder: target=240 temp=239.8 pwm=0.482
Stats 798924.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7977643 bytes_read=1662554 bytes_retransmit=9 bytes_invalid=0 send_seq=151693 receive_seq=151693 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.1 pwm=0.465 sd_pos=1386053 sysload=1.00 cputime=225.100 memavail=7290000 print_time=4150.204 buffer_time=2.135 print_stall=0 extruder: target=240 temp=239.8 pwm=0.496
Stats 798925.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7982724 bytes_read=1663306 bytes_retransmit=9 bytes_invalid=0 send_seq=151782 receive_seq=151782 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=562 freq=119992775 heater_bed: target=80 temp=80.1 pwm=0.370 sd_pos=1388504 sysload=1.00 cputime=225.198 memavail=7290000 print_time=4151.485 buffer_time=2.416 print_stall=0 extruder: target=240 temp=239.9 pwm=0.440
Stats 798926.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=7986040 bytes_read=1663889 bytes_retransmit=9 bytes_invalid=0 send_seq=151843 receive_seq=151843 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.1 pwm=0.450 sd_pos=1389121 sysload=1.00 cputime=225.278 memavail=7290000 print_time=4152.364 buffer_time=2.295 print_stall=0 extruder: target=240 temp=240.0 pwm=0.405
Stats 798927.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7989637 bytes_read=1664528 bytes_retransmit=9 bytes_invalid=0 send_seq=151912 receive_seq=151912 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.1 pwm=0.299 sd_pos=1390144 sysload=1.00 cputime=225.352 memavail=7290000 print_time=4153.611 buffer_time=2.541 print_stall=0 extruder: target=240 temp=240.1 pwm=0.405
Stats 798928.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7993340 bytes_read=1665182 bytes_retransmit=9 bytes_invalid=0 send_seq=151983 receive_seq=151983 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=80.1 pwm=0.457 sd_pos=1391565 sysload=1.00 cputime=225.425 memavail=7289272 print_time=4154.417 buffer_time=2.347 print_stall=0 extruder: target=240 temp=239.8 pwm=0.542
Stats 798929.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=7997126 bytes_read=1665808 bytes_retransmit=9 bytes_invalid=0 send_seq=152054 receive_seq=152054 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=98 freq=119992761 heater_bed: target=80 temp=80.1 pwm=0.392 sd_pos=1392694 sysload=1.00 cputime=225.504 memavail=7289276 print_time=4155.362 buffer_time=2.291 print_stall=0 extruder: target=240 temp=240.1 pwm=0.401
Stats 798930.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8001390 bytes_read=1666459 bytes_retransmit=9 bytes_invalid=0 send_seq=152129 receive_seq=152129 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=246 freq=119992752 heater_bed: target=80 temp=80.1 pwm=0.422 sd_pos=1393234 sysload=1.16 cputime=225.586 memavail=7289276 print_time=4156.655 buffer_time=2.583 print_stall=0 extruder: target=240 temp=239.9 pwm=0.467
Stats 798931.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8005266 bytes_read=1667137 bytes_retransmit=9 bytes_invalid=0 send_seq=152201 receive_seq=152201 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.1 pwm=0.423 sd_pos=1394413 sysload=1.16 cputime=225.662 memavail=7289276 print_time=4157.353 buffer_time=2.280 print_stall=0 extruder: target=240 temp=240.1 pwm=0.400
Stats 798932.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8009172 bytes_read=1667781 bytes_retransmit=9 bytes_invalid=0 send_seq=152271 receive_seq=152271 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=571 freq=119992737 heater_bed: target=80 temp=80.1 pwm=0.423 sd_pos=1395113 sysload=1.16 cputime=225.746 memavail=7289276 print_time=4158.309 buffer_time=2.237 print_stall=0 extruder: target=240 temp=239.9 pwm=0.541
Stats 798933.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8013224 bytes_read=1668429 bytes_retransmit=9 bytes_invalid=0 send_seq=152342 receive_seq=152342 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=3470 freq=119992732 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=1396521 sysload=1.16 cputime=225.856 memavail=7289276 print_time=4159.897 buffer_time=2.819 print_stall=0 extruder: target=240 temp=240.1 pwm=0.458
Stats 798934.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8017906 bytes_read=1669131 bytes_retransmit=9 bytes_invalid=0 send_seq=152424 receive_seq=152424 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=3302 freq=119992728 heater_bed: target=80 temp=80.1 pwm=0.332 sd_pos=1397097 sysload=1.16 cputime=225.972 memavail=7289172 print_time=4160.810 buffer_time=2.730 print_stall=0 extruder: target=240 temp=239.9 pwm=0.458
Stats 798935.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8022598 bytes_read=1669809 bytes_retransmit=9 bytes_invalid=0 send_seq=152504 receive_seq=152504 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1852 freq=119992726 heater_bed: target=80 temp=80.1 pwm=0.411 sd_pos=1397740 sysload=1.15 cputime=226.075 memavail=7289236 print_time=4161.564 buffer_time=2.484 print_stall=0 extruder: target=240 temp=239.9 pwm=0.474
Stats 798936.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8027496 bytes_read=1670533 bytes_retransmit=9 bytes_invalid=0 send_seq=152587 receive_seq=152587 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=613 freq=119992724 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=1398441 sysload=1.15 cputime=226.178 memavail=7289236 print_time=4162.302 buffer_time=2.221 print_stall=0 extruder: target=240 temp=240.0 pwm=0.412
Stats 798937.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8031692 bytes_read=1671185 bytes_retransmit=9 bytes_invalid=0 send_seq=152659 receive_seq=152659 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992718 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=1399181 sysload=1.15 cputime=226.272 memavail=7289236 print_time=4163.088 buffer_time=2.005 print_stall=0 extruder: target=240 temp=240.1 pwm=0.427
Stats 798938.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8033567 bytes_read=1671653 bytes_retransmit=9 bytes_invalid=0 send_seq=152697 receive_seq=152697 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992711 heater_bed: target=80 temp=80.0 pwm=0.433 sd_pos=1399235 sysload=1.15 cputime=226.338 memavail=7288484 print_time=4164.293 buffer_time=2.206 print_stall=0 extruder: target=240 temp=240.2 pwm=0.362
Stats 798939.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8034797 bytes_read=1672086 bytes_retransmit=9 bytes_invalid=0 send_seq=152725 receive_seq=152725 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.433 sd_pos=1399374 sysload=1.15 cputime=226.401 memavail=7288484 print_time=4165.134 buffer_time=2.047 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 798940.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8035592 bytes_read=1672483 bytes_retransmit=9 bytes_invalid=0 send_seq=152746 receive_seq=152746 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.433 sd_pos=1399487 sysload=1.22 cputime=226.455 memavail=7288484 print_time=4166.131 buffer_time=2.042 print_stall=0 extruder: target=240 temp=240.0 pwm=0.506
Stats 798941.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8036844 bytes_read=1672906 bytes_retransmit=9 bytes_invalid=0 send_seq=152775 receive_seq=152775 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992720 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=1399609 sysload=1.22 cputime=226.514 memavail=7288484 print_time=4167.308 buffer_time=2.217 print_stall=0 extruder: target=240 temp=240.0 pwm=0.420
Stats 798942.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=8040332 bytes_read=1673554 bytes_retransmit=9 bytes_invalid=0 send_seq=152843 receive_seq=152843 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992718 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=1400046 sysload=1.22 cputime=226.576 memavail=7288484 print_time=4168.098 buffer_time=2.007 print_stall=0 extruder: target=240 temp=240.2 pwm=0.308
Stats 798943.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=8045937 bytes_read=1674356 bytes_retransmit=9 bytes_invalid=0 send_seq=152945 receive_seq=152945 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=1946 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=1401385 sysload=1.22 cputime=226.670 memavail=7288484 print_time=4169.795 buffer_time=2.703 print_stall=0 extruder: target=240 temp=240.3 pwm=0.274
Stats 798944.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=8049639 bytes_read=1674959 bytes_retransmit=9 bytes_invalid=0 send_seq=153010 receive_seq=153010 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1719 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=1401893 sysload=1.22 cputime=226.758 memavail=7288484 print_time=4170.487 buffer_time=2.395 print_stall=0 extruder: target=240 temp=240.1 pwm=0.421
Stats 798945.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=8054489 bytes_read=1675667 bytes_retransmit=9 bytes_invalid=0 send_seq=153093 receive_seq=153093 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1485 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=1402513 sysload=1.12 cputime=226.859 memavail=7288484 print_time=4171.451 buffer_time=2.358 print_stall=0 extruder: target=240 temp=239.8 pwm=0.589
Stats 798946.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=8059092 bytes_read=1676359 bytes_retransmit=9 bytes_invalid=0 send_seq=153173 receive_seq=153173 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=502 freq=119992743 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=1403121 sysload=1.12 cputime=226.953 memavail=7288484 print_time=4172.114 buffer_time=2.021 print_stall=0 extruder: target=240 temp=240.0 pwm=0.457
Stats 798947.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8063870 bytes_read=1677063 bytes_retransmit=9 bytes_invalid=0 send_seq=153255 receive_seq=153255 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=2708 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=1404415 sysload=1.12 cputime=227.071 memavail=7288484 print_time=4173.531 buffer_time=2.437 print_stall=0 extruder: target=240 temp=239.9 pwm=0.457
Stats 798948.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8068873 bytes_read=1677786 bytes_retransmit=9 bytes_invalid=0 send_seq=153341 receive_seq=153341 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=1823 freq=119992730 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=1405022 sysload=1.12 cputime=227.181 memavail=7288264 print_time=4174.277 buffer_time=2.182 print_stall=0 extruder: target=240 temp=239.9 pwm=0.426
Stats 798949.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8074492 bytes_read=1678553 bytes_retransmit=9 bytes_invalid=0 send_seq=153436 receive_seq=153436 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=528 freq=119992730 heater_bed: target=80 temp=80.0 pwm=0.374 sd_pos=1405692 sysload=1.12 cputime=227.290 memavail=7288264 print_time=4175.311 buffer_time=2.216 print_stall=0 extruder: target=240 temp=240.1 pwm=0.344
Stats 798950.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8079488 bytes_read=1679251 bytes_retransmit=9 bytes_invalid=0 send_seq=153520 receive_seq=153520 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=2534 freq=119992728 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=1407359 sysload=1.03 cputime=227.404 memavail=7288264 print_time=4176.737 buffer_time=2.641 print_stall=0 extruder: target=240 temp=240.1 pwm=0.410
Stats 798951.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8083704 bytes_read=1679904 bytes_retransmit=9 bytes_invalid=0 send_seq=153592 receive_seq=153592 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=904 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=1408763 sysload=1.03 cputime=227.504 memavail=7288264 print_time=4177.441 buffer_time=2.345 print_stall=0 extruder: target=240 temp=240.3 pwm=0.337
Stats 798952.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8087473 bytes_read=1680547 bytes_retransmit=9 bytes_invalid=0 send_seq=153659 receive_seq=153659 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992720 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=1409520 sysload=1.03 cputime=227.590 memavail=7288264 print_time=4178.184 buffer_time=2.087 print_stall=0 extruder: target=240 temp=240.1 pwm=0.466
Stats 798953.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8092097 bytes_read=1681245 bytes_retransmit=9 bytes_invalid=0 send_seq=153743 receive_seq=153743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992716 heater_bed: target=80 temp=80.0 pwm=0.357 sd_pos=1410921 sysload=1.03 cputime=227.679 memavail=7288264 print_time=4179.564 buffer_time=2.466 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 798954.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8094658 bytes_read=1681793 bytes_retransmit=9 bytes_invalid=0 send_seq=153794 receive_seq=153794 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992709 heater_bed: target=80 temp=80.0 pwm=0.396 sd_pos=1412000 sysload=1.03 cputime=227.747 memavail=7288264 print_time=4180.219 buffer_time=2.121 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 798955.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8099081 bytes_read=1682490 bytes_retransmit=9 bytes_invalid=0 send_seq=153875 receive_seq=153875 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992713 heater_bed: target=80 temp=80.0 pwm=0.396 sd_pos=1412936 sysload=1.11 cputime=227.822 memavail=7288264 print_time=4181.236 buffer_time=2.137 print_stall=0 extruder: target=240 temp=240.0 pwm=0.488
Stats 798956.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8102449 bytes_read=1683099 bytes_retransmit=9 bytes_invalid=0 send_seq=153938 receive_seq=153938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992711 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=1414143 sysload=1.11 cputime=227.897 memavail=7288264 print_time=4182.319 buffer_time=2.219 print_stall=0 extruder: target=240 temp=240.1 pwm=0.408
Stats 798957.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8106052 bytes_read=1683742 bytes_retransmit=9 bytes_invalid=0 send_seq=154008 receive_seq=154008 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992706 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=1415419 sysload=1.11 cputime=227.964 memavail=7288264 print_time=4183.136 buffer_time=2.035 print_stall=0 extruder: target=240 temp=240.1 pwm=0.380
Stats 798958.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8110841 bytes_read=1684469 bytes_retransmit=9 bytes_invalid=0 send_seq=154095 receive_seq=154095 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992709 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=1417544 sysload=1.11 cputime=228.057 memavail=7288664 print_time=4184.237 buffer_time=2.135 print_stall=0 extruder: target=240 temp=240.1 pwm=0.415
Stats 798959.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8112581 bytes_read=1684922 bytes_retransmit=9 bytes_invalid=0 send_seq=154130 receive_seq=154130 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992701 heater_bed: target=80 temp=80.0 pwm=0.503 sd_pos=1417950 sysload=1.11 cputime=228.121 memavail=7288548 print_time=4185.247 buffer_time=2.145 print_stall=0 extruder: target=240 temp=240.3 pwm=0.341
Stats 798960.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8116770 bytes_read=1685610 bytes_retransmit=9 bytes_invalid=0 send_seq=154209 receive_seq=154209 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992692 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=1419407 sysload=1.10 cputime=228.190 memavail=7291392 print_time=4186.319 buffer_time=2.216 print_stall=0 extruder: target=240 temp=240.1 pwm=0.419
Stats 798961.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8121494 bytes_read=1686337 bytes_retransmit=9 bytes_invalid=0 send_seq=154296 receive_seq=154296 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=747 freq=119992732 heater_bed: target=80 temp=79.9 pwm=0.475 sd_pos=1421388 sysload=1.10 cputime=228.275 memavail=7291460 print_time=4187.668 buffer_time=2.564 print_stall=0 extruder: target=240 temp=240.0 pwm=0.473
Stats 798962.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8124634 bytes_read=1686921 bytes_retransmit=9 bytes_invalid=0 send_seq=154354 receive_seq=154354 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=79.9 pwm=0.478 sd_pos=1421605 sysload=1.10 cputime=228.347 memavail=7291460 print_time=4188.300 buffer_time=2.196 print_stall=0 extruder: target=240 temp=240.1 pwm=0.394
Stats 798963.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8129701 bytes_read=1687661 bytes_retransmit=9 bytes_invalid=0 send_seq=154444 receive_seq=154444 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=396 freq=119992729 heater_bed: target=80 temp=79.9 pwm=0.421 sd_pos=1422891 sysload=1.10 cputime=228.434 memavail=7291236 print_time=4189.647 buffer_time=2.541 print_stall=0 extruder: target=240 temp=239.8 pwm=0.552
Stats 798964.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8133432 bytes_read=1688290 bytes_retransmit=9 bytes_invalid=0 send_seq=154513 receive_seq=154513 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=477 freq=119992723 heater_bed: target=80 temp=79.9 pwm=0.421 sd_pos=1423392 sysload=1.10 cputime=228.520 memavail=7290744 print_time=4190.515 buffer_time=2.409 print_stall=0 extruder: target=240 temp=239.7 pwm=0.568
Stats 798965.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8136815 bytes_read=1688866 bytes_retransmit=9 bytes_invalid=0 send_seq=154574 receive_seq=154574 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=912 freq=119992720 heater_bed: target=80 temp=79.9 pwm=0.421 sd_pos=1424086 sysload=1.09 cputime=228.599 memavail=7290748 print_time=4191.338 buffer_time=2.230 print_stall=0 extruder: target=240 temp=240.0 pwm=0.427
Stats 798966.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8141384 bytes_read=1689544 bytes_retransmit=9 bytes_invalid=0 send_seq=154652 receive_seq=154651 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=357 freq=119992717 heater_bed: target=80 temp=79.9 pwm=0.488 sd_pos=1424615 sysload=1.09 cputime=228.700 memavail=7290748 print_time=4192.182 buffer_time=2.074 print_stall=0 extruder: target=240 temp=239.9 pwm=0.472
Stats 798967.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8146024 bytes_read=1690267 bytes_retransmit=9 bytes_invalid=0 send_seq=154734 receive_seq=154734 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=2208 freq=119992711 heater_bed: target=80 temp=79.9 pwm=0.524 sd_pos=1425932 sysload=1.09 cputime=228.807 memavail=7290748 print_time=4193.613 buffer_time=2.504 print_stall=0 extruder: target=240 temp=239.8 pwm=0.502
Stats 798968.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8150847 bytes_read=1690960 bytes_retransmit=9 bytes_invalid=0 send_seq=154817 receive_seq=154817 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1469 freq=119992708 heater_bed: target=80 temp=79.9 pwm=0.499 sd_pos=1426619 sysload=1.09 cputime=228.906 memavail=7290748 print_time=4194.611 buffer_time=2.501 print_stall=0 extruder: target=240 temp=240.0 pwm=0.436
Stats 798969.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8155337 bytes_read=1691648 bytes_retransmit=9 bytes_invalid=0 send_seq=154896 receive_seq=154896 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119992703 heater_bed: target=80 temp=79.9 pwm=0.422 sd_pos=1426999 sysload=1.09 cputime=228.991 memavail=7290748 print_time=4195.366 buffer_time=2.256 print_stall=0 extruder: target=240 temp=239.9 pwm=0.515
Stats 798970.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8156277 bytes_read=1692065 bytes_retransmit=9 bytes_invalid=0 send_seq=154921 receive_seq=154921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=79.9 pwm=0.477 sd_pos=1427053 sysload=1.16 cputime=229.051 memavail=7290748 print_time=4196.123 buffer_time=2.012 print_stall=0 extruder: target=240 temp=240.1 pwm=0.415
Stats 798971.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8157973 bytes_read=1692538 bytes_retransmit=9 bytes_invalid=0 send_seq=154960 receive_seq=154960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=79.9 pwm=0.405 sd_pos=1427192 sysload=1.16 cputime=229.102 memavail=7290748 print_time=4197.213 buffer_time=2.102 print_stall=0 extruder: target=240 temp=240.1 pwm=0.397
Stats 798972.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8158843 bytes_read=1692967 bytes_retransmit=9 bytes_invalid=0 send_seq=154984 receive_seq=154984 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=79.9 pwm=0.399 sd_pos=1427249 sysload=1.16 cputime=229.151 memavail=7290748 print_time=4198.141 buffer_time=2.030 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 798973.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8160556 bytes_read=1693444 bytes_retransmit=9 bytes_invalid=0 send_seq=155021 receive_seq=155021 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=79.9 pwm=0.512 sd_pos=1427427 sysload=1.16 cputime=229.213 memavail=7290748 print_time=4199.586 buffer_time=2.473 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 798974.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8163870 bytes_read=1694047 bytes_retransmit=9 bytes_invalid=0 send_seq=155086 receive_seq=155086 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=79.9 pwm=0.329 sd_pos=1427912 sysload=1.16 cputime=229.281 memavail=7290524 print_time=4200.338 buffer_time=2.225 print_stall=0 extruder: target=240 temp=239.7 pwm=0.590
Stats 798975.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8169164 bytes_read=1694830 bytes_retransmit=9 bytes_invalid=0 send_seq=155184 receive_seq=155184 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=2695 freq=119992741 heater_bed: target=80 temp=79.9 pwm=0.560 sd_pos=1429340 sysload=1.15 cputime=229.370 memavail=7290524 print_time=4202.077 buffer_time=2.964 print_stall=0 extruder: target=240 temp=239.8 pwm=0.531
Stats 798976.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8172122 bytes_read=1695392 bytes_retransmit=9 bytes_invalid=0 send_seq=155238 receive_seq=155238 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=2778 freq=119992738 heater_bed: target=80 temp=79.9 pwm=0.393 sd_pos=1429680 sysload=1.15 cputime=229.448 memavail=7290524 print_time=4202.621 buffer_time=2.506 print_stall=0 extruder: target=240 temp=239.8 pwm=0.497
Stats 798977.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8177248 bytes_read=1696131 bytes_retransmit=9 bytes_invalid=0 send_seq=155327 receive_seq=155327 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=1807 freq=119992733 heater_bed: target=80 temp=79.9 pwm=0.410 sd_pos=1429957 sysload=1.15 cputime=229.537 memavail=7290076 print_time=4203.324 buffer_time=2.209 print_stall=0 extruder: target=240 temp=239.7 pwm=0.586
Stats 798978.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8181876 bytes_read=1696829 bytes_retransmit=9 bytes_invalid=0 send_seq=155408 receive_seq=155408 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=956 freq=119992743 heater_bed: target=80 temp=79.9 pwm=0.464 sd_pos=1430586 sysload=1.15 cputime=229.635 memavail=7290224 print_time=4204.132 buffer_time=2.016 print_stall=0 extruder: target=240 temp=240.1 pwm=0.372
Stats 798979.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8187503 bytes_read=1697601 bytes_retransmit=9 bytes_invalid=0 send_seq=155504 receive_seq=155504 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=2556 freq=119992750 heater_bed: target=80 temp=79.9 pwm=0.380 sd_pos=1431844 sysload=1.15 cputime=229.763 memavail=7290332 print_time=4205.588 buffer_time=2.472 print_stall=0 extruder: target=240 temp=239.9 pwm=0.476
Stats 798980.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8192236 bytes_read=1698289 bytes_retransmit=9 bytes_invalid=0 send_seq=155586 receive_seq=155586 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1510 freq=119992745 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=1432648 sysload=1.14 cputime=229.868 memavail=7290332 print_time=4206.363 buffer_time=2.247 print_stall=0 extruder: target=240 temp=240.0 pwm=0.473
Stats 798981.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8197639 bytes_read=1699042 bytes_retransmit=9 bytes_invalid=0 send_seq=155678 receive_seq=155678 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=2987 freq=119992741 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=1433561 sysload=1.14 cputime=229.974 memavail=7290332 print_time=4207.672 buffer_time=2.555 print_stall=0 extruder: target=240 temp=240.2 pwm=0.414
Stats 798982.7: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8201905 bytes_read=1699720 bytes_retransmit=9 bytes_invalid=0 send_seq=155752 receive_seq=155752 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2087 freq=119992736 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=1434100 sysload=1.14 cputime=230.074 memavail=7290332 print_time=4208.430 buffer_time=2.312 print_stall=0 extruder: target=240 temp=240.0 pwm=0.432
Stats 798983.7: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8207340 bytes_read=1700468 bytes_retransmit=9 bytes_invalid=0 send_seq=155846 receive_seq=155846 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2087 freq=119992735 heater_bed: target=80 temp=79.9 pwm=0.389 sd_pos=1435958 sysload=1.14 cputime=230.195 memavail=7290332 print_time=4209.807 buffer_time=2.689 print_stall=0 extruder: target=240 temp=240.2 pwm=0.342
Stats 798984.7: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8211915 bytes_read=1701171 bytes_retransmit=9 bytes_invalid=0 send_seq=155928 receive_seq=155928 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=79.9 pwm=0.404 sd_pos=1436852 sysload=1.14 cputime=230.284 memavail=7290332 print_time=4210.379 buffer_time=2.260 print_stall=0 extruder: target=240 temp=239.8 pwm=0.577
Stats 798985.7: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8216682 bytes_read=1701898 bytes_retransmit=9 bytes_invalid=0 send_seq=156015 receive_seq=156015 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=79.9 pwm=0.464 sd_pos=1438409 sysload=1.13 cputime=230.387 memavail=7290332 print_time=4211.763 buffer_time=2.644 print_stall=0 extruder: target=240 temp=239.8 pwm=0.555
Stats 798986.7: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8218859 bytes_read=1702406 bytes_retransmit=9 bytes_invalid=0 send_seq=156061 receive_seq=156061 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992720 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=1439220 sysload=1.13 cputime=230.459 memavail=7290332 print_time=4212.358 buffer_time=2.237 print_stall=0 extruder: target=240 temp=239.7 pwm=0.596
Stats 798987.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8222881 bytes_read=1703095 bytes_retransmit=9 bytes_invalid=0 send_seq=156137 receive_seq=156137 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992719 heater_bed: target=80 temp=80.0 pwm=0.337 sd_pos=1440141 sysload=1.13 cputime=230.536 memavail=7290332 print_time=4213.305 buffer_time=2.184 print_stall=0 extruder: target=240 temp=240.0 pwm=0.421
Stats 798988.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8225376 bytes_read=1703642 bytes_retransmit=9 bytes_invalid=0 send_seq=156188 receive_seq=156188 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=1440697 sysload=1.13 cputime=230.606 memavail=7291072 print_time=4214.272 buffer_time=2.150 print_stall=0 extruder: target=240 temp=240.3 pwm=0.307
Stats 798989.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8229072 bytes_read=1704270 bytes_retransmit=9 bytes_invalid=0 send_seq=156258 receive_seq=156258 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=1441614 sysload=1.13 cputime=230.680 memavail=7291124 print_time=4215.128 buffer_time=2.007 print_stall=0 extruder: target=240 temp=240.4 pwm=0.279
Stats 798990.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8233990 bytes_read=1705023 bytes_retransmit=9 bytes_invalid=0 send_seq=156350 receive_seq=156350 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.549 sd_pos=1443533 sysload=1.20 cputime=230.779 memavail=7291124 print_time=4216.331 buffer_time=2.209 print_stall=0 extruder: target=240 temp=240.0 pwm=0.520
Stats 798991.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8237867 bytes_read=1705680 bytes_retransmit=9 bytes_invalid=0 send_seq=156423 receive_seq=156423 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=80.0 pwm=0.446 sd_pos=1445511 sysload=1.20 cputime=230.879 memavail=7291124 print_time=4217.187 buffer_time=2.064 print_stall=0 extruder: target=240 temp=239.9 pwm=0.494
Stats 798992.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8239807 bytes_read=1706195 bytes_retransmit=9 bytes_invalid=0 send_seq=156465 receive_seq=156465 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992720 heater_bed: target=80 temp=80.0 pwm=0.384 sd_pos=1445743 sysload=1.20 cputime=230.955 memavail=7291124 print_time=4218.393 buffer_time=2.268 print_stall=0 extruder: target=240 temp=239.8 pwm=0.514
Stats 798993.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8243565 bytes_read=1706848 bytes_retransmit=9 bytes_invalid=0 send_seq=156537 receive_seq=156537 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992721 heater_bed: target=80 temp=79.9 pwm=0.512 sd_pos=1447267 sysload=1.20 cputime=231.047 memavail=7291124 print_time=4219.368 buffer_time=2.243 print_stall=0 extruder: target=240 temp=240.1 pwm=0.360
Stats 798994.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8247566 bytes_read=1707515 bytes_retransmit=9 bytes_invalid=0 send_seq=156612 receive_seq=156612 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992716 heater_bed: target=80 temp=79.9 pwm=0.445 sd_pos=1449193 sysload=1.20 cputime=231.142 memavail=7290768 print_time=4220.256 buffer_time=2.130 print_stall=0 extruder: target=240 temp=240.0 pwm=0.482
Stats 798995.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8251796 bytes_read=1708173 bytes_retransmit=9 bytes_invalid=0 send_seq=156688 receive_seq=156688 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=685 freq=119992716 heater_bed: target=80 temp=79.9 pwm=0.445 sd_pos=1449878 sysload=1.18 cputime=231.233 memavail=7290852 print_time=4221.630 buffer_time=2.503 print_stall=0 extruder: target=240 temp=239.9 pwm=0.515
Stats 798996.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8255025 bytes_read=1708761 bytes_retransmit=9 bytes_invalid=0 send_seq=156747 receive_seq=156747 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=79.9 pwm=0.454 sd_pos=1450145 sysload=1.18 cputime=231.309 memavail=7290852 print_time=4222.339 buffer_time=2.212 print_stall=0 extruder: target=240 temp=240.0 pwm=0.480
Stats 798997.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8259026 bytes_read=1709434 bytes_retransmit=9 bytes_invalid=0 send_seq=156820 receive_seq=156820 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=79.9 pwm=0.402 sd_pos=1450866 sysload=1.18 cputime=231.391 memavail=7290852 print_time=4223.263 buffer_time=2.135 print_stall=0 extruder: target=240 temp=240.0 pwm=0.480
Stats 798998.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8263691 bytes_read=1710132 bytes_retransmit=9 bytes_invalid=0 send_seq=156904 receive_seq=156904 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=2117 freq=119992754 heater_bed: target=80 temp=79.9 pwm=0.456 sd_pos=1452329 sysload=1.18 cputime=231.490 memavail=7290348 print_time=4224.858 buffer_time=2.729 print_stall=0 extruder: target=240 temp=240.0 pwm=0.414
Stats 798999.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8267721 bytes_read=1710775 bytes_retransmit=9 bytes_invalid=0 send_seq=156975 receive_seq=156975 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=2516 freq=119992748 heater_bed: target=80 temp=79.9 pwm=0.468 sd_pos=1452875 sysload=1.18 cputime=231.593 memavail=7290128 print_time=4225.909 buffer_time=2.780 print_stall=0 extruder: target=240 temp=240.1 pwm=0.414
Stats 799000.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8272454 bytes_read=1711469 bytes_retransmit=9 bytes_invalid=0 send_seq=157057 receive_seq=157057 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1297 freq=119992744 heater_bed: target=80 temp=79.9 pwm=0.405 sd_pos=1453714 sysload=1.17 cputime=231.694 memavail=7290128 print_time=4226.610 buffer_time=2.480 print_stall=0 extruder: target=240 temp=239.8 pwm=0.555
Stats 799001.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8276683 bytes_read=1712117 bytes_retransmit=9 bytes_invalid=0 send_seq=157132 receive_seq=157132 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=793 freq=119992736 heater_bed: target=80 temp=79.9 pwm=0.473 sd_pos=1454196 sysload=1.17 cputime=231.779 memavail=7290128 print_time=4227.442 buffer_time=2.312 print_stall=0 extruder: target=240 temp=239.7 pwm=0.590
Stats 799002.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8281253 bytes_read=1712821 bytes_retransmit=9 bytes_invalid=0 send_seq=157211 receive_seq=157211 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=771 freq=119992735 heater_bed: target=80 temp=79.9 pwm=0.473 sd_pos=1454968 sysload=1.17 cputime=231.874 memavail=7290128 print_time=4228.344 buffer_time=2.213 print_stall=0 extruder: target=240 temp=239.9 pwm=0.486
Stats 799003.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8285404 bytes_read=1713473 bytes_retransmit=9 bytes_invalid=0 send_seq=157283 receive_seq=157283 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=125 freq=119992733 heater_bed: target=80 temp=79.9 pwm=0.462 sd_pos=1456183 sysload=1.17 cputime=231.974 memavail=7290128 print_time=4229.193 buffer_time=2.062 print_stall=0 extruder: target=240 temp=240.4 pwm=0.316
Stats 799004.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8287919 bytes_read=1713996 bytes_retransmit=9 bytes_invalid=0 send_seq=157332 receive_seq=157332 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=79.9 pwm=0.436 sd_pos=1456346 sysload=1.17 cputime=232.043 memavail=7290128 print_time=4230.385 buffer_time=2.254 print_stall=0 extruder: target=240 temp=240.4 pwm=0.278
Stats 799005.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8289577 bytes_read=1714474 bytes_retransmit=9 bytes_invalid=0 send_seq=157369 receive_seq=157369 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=79.9 pwm=0.436 sd_pos=1456485 sysload=1.07 cputime=232.107 memavail=7290128 print_time=4231.475 buffer_time=2.343 print_stall=0 extruder: target=240 temp=240.1 pwm=0.480
Stats 799006.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8290414 bytes_read=1714876 bytes_retransmit=9 bytes_invalid=0 send_seq=157391 receive_seq=157391 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=79.9 pwm=0.436 sd_pos=1456542 sysload=1.07 cputime=232.156 memavail=7290128 print_time=4232.404 buffer_time=2.271 print_stall=0 extruder: target=240 temp=239.8 pwm=0.558
Stats 799007.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=8292150 bytes_read=1715355 bytes_retransmit=9 bytes_invalid=0 send_seq=157428 receive_seq=157428 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1456720 sysload=1.07 cputime=232.210 memavail=7290132 print_time=4233.848 buffer_time=2.714 print_stall=0 extruder: target=240 temp=240.1 pwm=0.324
Stats 799008.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=8296075 bytes_read=1716023 bytes_retransmit=9 bytes_invalid=0 send_seq=157503 receive_seq=157503 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=1457286 sysload=1.07 cputime=232.278 memavail=7289880 print_time=4234.678 buffer_time=2.543 print_stall=0 extruder: target=240 temp=240.0 pwm=0.433
Stats 799009.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=8299248 bytes_read=1716615 bytes_retransmit=9 bytes_invalid=0 send_seq=157563 receive_seq=157563 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=1457757 sysload=1.07 cputime=232.343 memavail=7289880 print_time=4235.286 buffer_time=2.151 print_stall=0 extruder: target=240 temp=240.0 pwm=0.433
Stats 799010.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=8302825 bytes_read=1717218 bytes_retransmit=9 bytes_invalid=0 send_seq=157628 receive_seq=157628 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=2262 freq=119992809 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=1458549 sysload=0.99 cputime=232.426 memavail=7289656 print_time=4236.663 buffer_time=2.527 print_stall=0 extruder: target=240 temp=240.1 pwm=0.393
Stats 799011.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=8308131 bytes_read=1717966 bytes_retransmit=9 bytes_invalid=0 send_seq=157719 receive_seq=157719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=245 freq=119992818 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=1459030 sysload=0.99 cputime=232.517 memavail=7289908 print_time=4237.342 buffer_time=2.205 print_stall=0 extruder: target=240 temp=239.8 pwm=0.540
Stats 799012.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8312619 bytes_read=1718659 bytes_retransmit=9 bytes_invalid=0 send_seq=157796 receive_seq=157796 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=473 freq=119992805 heater_bed: target=80 temp=79.9 pwm=0.465 sd_pos=1459813 sysload=0.99 cputime=232.602 memavail=7289908 print_time=4238.316 buffer_time=2.179 print_stall=0 extruder: target=240 temp=239.8 pwm=0.547
Stats 799013.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8316902 bytes_read=1719317 bytes_retransmit=9 bytes_invalid=0 send_seq=157872 receive_seq=157872 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=3205 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=1461212 sysload=0.99 cputime=232.708 memavail=7289908 print_time=4239.641 buffer_time=2.503 print_stall=0 extruder: target=240 temp=239.9 pwm=0.470
Stats 799014.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8321577 bytes_read=1720010 bytes_retransmit=9 bytes_invalid=0 send_seq=157952 receive_seq=157952 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=2356 freq=119992788 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=1461765 sysload=0.99 cputime=232.802 memavail=7289908 print_time=4240.462 buffer_time=2.323 print_stall=0 extruder: target=240 temp=239.8 pwm=0.470
Stats 799015.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8327061 bytes_read=1720762 bytes_retransmit=9 bytes_invalid=0 send_seq=158044 receive_seq=158044 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=1098 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.509 sd_pos=1462397 sysload=0.91 cputime=232.952 memavail=7292320 print_time=4241.331 buffer_time=2.192 print_stall=0 extruder: target=240 temp=240.3 pwm=0.353
Stats 799016.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8331958 bytes_read=1721460 bytes_retransmit=9 bytes_invalid=0 send_seq=158128 receive_seq=158128 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1727 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.494 sd_pos=1463193 sysload=0.91 cputime=233.034 memavail=7292380 print_time=4242.576 buffer_time=2.436 print_stall=0 extruder: target=240 temp=239.9 pwm=0.522
Stats 799017.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8336798 bytes_read=1722189 bytes_retransmit=9 bytes_invalid=0 send_seq=158212 receive_seq=158212 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=925 freq=119992772 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=1464175 sysload=0.91 cputime=233.115 memavail=7292380 print_time=4243.397 buffer_time=2.256 print_stall=0 extruder: target=240 temp=239.8 pwm=0.545
Stats 799018.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8341301 bytes_read=1722866 bytes_retransmit=9 bytes_invalid=0 send_seq=158289 receive_seq=158289 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1464856 sysload=0.91 cputime=233.202 memavail=7292380 print_time=4244.439 buffer_time=2.298 print_stall=0 extruder: target=240 temp=239.9 pwm=0.452
Stats 799019.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8344512 bytes_read=1723434 bytes_retransmit=9 bytes_invalid=0 send_seq=158347 receive_seq=158347 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992801 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1465813 sysload=0.91 cputime=233.279 memavail=7292380 print_time=4245.225 buffer_time=2.083 print_stall=0 extruder: target=240 temp=239.9 pwm=0.480
Stats 799020.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8349394 bytes_read=1724177 bytes_retransmit=9 bytes_invalid=0 send_seq=158437 receive_seq=158437 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=1466903 sysload=0.92 cputime=233.360 memavail=7292156 print_time=4246.497 buffer_time=2.355 print_stall=0 extruder: target=240 temp=240.2 pwm=0.354
Stats 799021.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8352242 bytes_read=1724744 bytes_retransmit=9 bytes_invalid=0 send_seq=158492 receive_seq=158492 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=50 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.341 sd_pos=1467941 sysload=0.92 cputime=233.426 memavail=7292156 print_time=4247.147 buffer_time=2.005 print_stall=0 extruder: target=240 temp=240.1 pwm=0.418
Stats 799022.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8356984 bytes_read=1725478 bytes_retransmit=9 bytes_invalid=0 send_seq=158580 receive_seq=158580 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=50 freq=119992804 heater_bed: target=80 temp=80.1 pwm=0.282 sd_pos=1469157 sysload=0.92 cputime=233.505 memavail=7292156 print_time=4248.598 buffer_time=2.454 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 799023.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8360859 bytes_read=1726161 bytes_retransmit=9 bytes_invalid=0 send_seq=158658 receive_seq=158658 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119992798 heater_bed: target=80 temp=80.1 pwm=0.392 sd_pos=1472553 sysload=0.92 cputime=233.599 memavail=7292156 print_time=4249.383 buffer_time=2.239 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 799024.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8363589 bytes_read=1726703 bytes_retransmit=9 bytes_invalid=0 send_seq=158708 receive_seq=158708 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992788 heater_bed: target=80 temp=80.1 pwm=0.351 sd_pos=1473927 sysload=0.92 cputime=233.685 memavail=7291828 print_time=4250.120 buffer_time=1.975 print_stall=0 extruder: target=240 temp=240.2 pwm=0.352
Stats 799025.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8365634 bytes_read=1727186 bytes_retransmit=9 bytes_invalid=0 send_seq=158749 receive_seq=158749 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992779 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=1474130 sysload=0.92 cputime=233.748 memavail=7291912 print_time=4251.318 buffer_time=2.172 print_stall=0 extruder: target=240 temp=240.1 pwm=0.387
Stats 799026.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8369950 bytes_read=1727879 bytes_retransmit=9 bytes_invalid=0 send_seq=158829 receive_seq=158829 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=1476748 sysload=0.92 cputime=233.832 memavail=7291912 print_time=4252.406 buffer_time=2.259 print_stall=0 extruder: target=240 temp=239.9 pwm=0.478
Stats 799027.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8374114 bytes_read=1728567 bytes_retransmit=9 bytes_invalid=0 send_seq=158905 receive_seq=158905 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=1481393 sysload=0.92 cputime=233.945 memavail=7291912 print_time=4253.277 buffer_time=2.131 print_stall=0 extruder: target=240 temp=239.8 pwm=0.545
Stats 799028.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8378012 bytes_read=1729190 bytes_retransmit=9 bytes_invalid=0 send_seq=158974 receive_seq=158974 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=458 freq=119992831 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=1482794 sysload=0.92 cputime=234.048 memavail=7291916 print_time=4254.424 buffer_time=2.277 print_stall=0 extruder: target=240 temp=240.0 pwm=0.419
Stats 799029.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8382939 bytes_read=1729923 bytes_retransmit=9 bytes_invalid=0 send_seq=159062 receive_seq=159062 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=1226 freq=119992819 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=1483548 sysload=0.92 cputime=234.149 memavail=7291916 print_time=4255.991 buffer_time=2.842 print_stall=0 extruder: target=240 temp=240.0 pwm=0.406
Stats 799030.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8387104 bytes_read=1730595 bytes_retransmit=9 bytes_invalid=0 send_seq=159138 receive_seq=159138 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1334 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.433 sd_pos=1484267 sysload=0.93 cputime=234.228 memavail=7291916 print_time=4257.007 buffer_time=2.857 print_stall=0 extruder: target=240 temp=240.0 pwm=0.449
Stats 799031.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8390461 bytes_read=1731188 bytes_retransmit=9 bytes_invalid=0 send_seq=159201 receive_seq=159201 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1834 freq=119992802 heater_bed: target=80 temp=80.0 pwm=0.485 sd_pos=1485047 sysload=0.93 cputime=234.302 memavail=7291916 print_time=4257.674 buffer_time=2.524 print_stall=0 extruder: target=240 temp=240.1 pwm=0.377
Stats 799032.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8394704 bytes_read=1731867 bytes_retransmit=9 bytes_invalid=0 send_seq=159275 receive_seq=159275 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=1397 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=1485605 sysload=0.93 cputime=234.402 memavail=7291916 print_time=4258.504 buffer_time=2.354 print_stall=0 extruder: target=240 temp=239.8 pwm=0.543
Stats 799033.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8398992 bytes_read=1732529 bytes_retransmit=9 bytes_invalid=0 send_seq=159349 receive_seq=159349 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1471 freq=119992781 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=1486414 sysload=0.93 cputime=234.507 memavail=7291916 print_time=4259.439 buffer_time=2.288 print_stall=0 extruder: target=240 temp=239.9 pwm=0.485
Stats 799034.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8404223 bytes_read=1733257 bytes_retransmit=9 bytes_invalid=0 send_seq=159439 receive_seq=159439 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=169 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1487152 sysload=0.93 cputime=234.613 memavail=7291916 print_time=4260.401 buffer_time=2.249 print_stall=0 extruder: target=240 temp=240.1 pwm=0.392
Stats 799035.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8407301 bytes_read=1733845 bytes_retransmit=9 bytes_invalid=0 send_seq=159499 receive_seq=159499 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=10 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=1487327 sysload=1.02 cputime=234.686 memavail=7291916 print_time=4261.430 buffer_time=2.277 print_stall=0 extruder: target=240 temp=240.0 pwm=0.422
Stats 799036.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8408537 bytes_read=1734274 bytes_retransmit=9 bytes_invalid=0 send_seq=159528 receive_seq=159528 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=1487519 sysload=1.02 cputime=234.746 memavail=7291916 print_time=4262.286 buffer_time=2.132 print_stall=0 extruder: target=240 temp=240.3 pwm=0.304
Stats 799037.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8410254 bytes_read=1734745 bytes_retransmit=9 bytes_invalid=0 send_seq=159564 receive_seq=159564 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=1487797 sysload=1.02 cputime=234.801 memavail=7291468 print_time=4263.181 buffer_time=2.028 print_stall=0 extruder: target=240 temp=239.7 pwm=0.603
Stats 799038.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8411550 bytes_read=1735193 bytes_retransmit=9 bytes_invalid=0 send_seq=159595 receive_seq=159595 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.490 sd_pos=1488022 sysload=1.02 cputime=234.870 memavail=7291220 print_time=4264.419 buffer_time=2.265 print_stall=0 extruder: target=240 temp=239.8 pwm=0.514
Stats 799039.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8412772 bytes_read=1735630 bytes_retransmit=9 bytes_invalid=0 send_seq=159624 receive_seq=159624 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=1488337 sysload=1.02 cputime=234.935 memavail=7291220 print_time=4265.381 buffer_time=2.227 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 799040.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8416784 bytes_read=1736288 bytes_retransmit=9 bytes_invalid=0 send_seq=159700 receive_seq=159700 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=1488879 sysload=0.93 cputime=234.996 memavail=7291220 print_time=4266.199 buffer_time=2.044 print_stall=0 extruder: target=240 temp=240.2 pwm=0.340
Stats 799041.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8421887 bytes_read=1737046 bytes_retransmit=9 bytes_invalid=0 send_seq=159793 receive_seq=159793 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=1687 freq=119992753 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=1489883 sysload=0.93 cputime=235.085 memavail=7291220 print_time=4267.703 buffer_time=2.548 print_stall=0 extruder: target=240 temp=240.0 pwm=0.442
Stats 799042.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8425961 bytes_read=1737719 bytes_retransmit=9 bytes_invalid=0 send_seq=159866 receive_seq=159866 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=1253 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=1490072 sysload=0.93 cputime=235.176 memavail=7291220 print_time=4268.375 buffer_time=2.220 print_stall=0 extruder: target=240 temp=239.9 pwm=0.491
Stats 799043.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8430623 bytes_read=1738407 bytes_retransmit=9 bytes_invalid=0 send_seq=159948 receive_seq=159948 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=3291 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=1490714 sysload=0.93 cputime=235.281 memavail=7291220 print_time=4269.809 buffer_time=2.653 print_stall=0 extruder: target=240 temp=239.8 pwm=0.491
Stats 799044.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8435679 bytes_read=1739135 bytes_retransmit=9 bytes_invalid=0 send_seq=160035 receive_seq=160035 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=2046 freq=119992730 heater_bed: target=80 temp=79.9 pwm=0.477 sd_pos=1491382 sysload=0.93 cputime=235.379 memavail=7291220 print_time=4270.533 buffer_time=2.376 print_stall=0 extruder: target=240 temp=239.8 pwm=0.498
Stats 799045.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8440678 bytes_read=1739847 bytes_retransmit=9 bytes_invalid=0 send_seq=160119 receive_seq=160119 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=719 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=1491990 sysload=0.94 cputime=235.478 memavail=7291220 print_time=4271.185 buffer_time=2.027 print_stall=0 extruder: target=240 temp=240.1 pwm=0.384
Stats 799046.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8445402 bytes_read=1740530 bytes_retransmit=9 bytes_invalid=0 send_seq=160200 receive_seq=160200 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=2349 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=1492802 sysload=0.94 cputime=235.586 memavail=7291220 print_time=4272.575 buffer_time=2.417 print_stall=0 extruder: target=240 temp=240.1 pwm=0.428
Stats 799047.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8450700 bytes_read=1741313 bytes_retransmit=9 bytes_invalid=0 send_seq=160292 receive_seq=160292 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=356 freq=119992763 heater_bed: target=80 temp=79.9 pwm=0.426 sd_pos=1493121 sysload=0.94 cputime=235.687 memavail=7291220 print_time=4273.231 buffer_time=2.072 print_stall=0 extruder: target=240 temp=240.3 pwm=0.361
Stats 799048.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8455050 bytes_read=1741976 bytes_retransmit=9 bytes_invalid=0 send_seq=160369 receive_seq=160369 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=2880 freq=119992755 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=1493827 sysload=0.94 cputime=235.803 memavail=7290744 print_time=4274.729 buffer_time=2.570 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 799049.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8460144 bytes_read=1742684 bytes_retransmit=9 bytes_invalid=0 send_seq=160455 receive_seq=160455 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1361 freq=119992763 heater_bed: target=80 temp=79.9 pwm=0.434 sd_pos=1494702 sysload=0.94 cputime=235.899 memavail=7290748 print_time=4275.384 buffer_time=2.224 print_stall=0 extruder: target=240 temp=239.8 pwm=0.550
Stats 799050.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8464483 bytes_read=1743366 bytes_retransmit=9 bytes_invalid=0 send_seq=160530 receive_seq=160530 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=79.9 pwm=0.445 sd_pos=1494932 sysload=1.02 cputime=236.001 memavail=7290748 print_time=4276.201 buffer_time=2.040 print_stall=0 extruder: target=240 temp=239.8 pwm=0.550
Stats 799051.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8469567 bytes_read=1744084 bytes_retransmit=9 bytes_invalid=0 send_seq=160618 receive_seq=160618 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=60 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=1496919 sysload=1.02 cputime=236.107 memavail=7290748 print_time=4277.351 buffer_time=2.190 print_stall=0 extruder: target=240 temp=239.9 pwm=0.482
Stats 799052.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8473715 bytes_read=1744753 bytes_retransmit=9 bytes_invalid=0 send_seq=160693 receive_seq=160693 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=50 freq=119992743 heater_bed: target=80 temp=80.0 pwm=0.360 sd_pos=1498470 sysload=1.02 cputime=236.200 memavail=7290748 print_time=4278.264 buffer_time=2.103 print_stall=0 extruder: target=240 temp=240.0 pwm=0.408
Stats 799053.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8478460 bytes_read=1745510 bytes_retransmit=9 bytes_invalid=0 send_seq=160783 receive_seq=160783 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=279 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=1500216 sysload=1.02 cputime=236.292 memavail=7290752 print_time=4279.750 buffer_time=2.589 print_stall=0 extruder: target=240 temp=240.1 pwm=0.400
Stats 799054.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8480339 bytes_read=1745999 bytes_retransmit=9 bytes_invalid=0 send_seq=160823 receive_seq=160823 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=50 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=1500457 sysload=1.02 cputime=236.359 memavail=7290900 print_time=4280.361 buffer_time=2.199 print_stall=0 extruder: target=240 temp=240.2 pwm=0.400
Stats 799055.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8483052 bytes_read=1746542 bytes_retransmit=9 bytes_invalid=0 send_seq=160876 receive_seq=160876 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=120 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=1502370 sysload=0.94 cputime=236.447 memavail=7290964 print_time=4281.617 buffer_time=2.455 print_stall=0 extruder: target=240 temp=240.1 pwm=0.451
Stats 799056.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8485727 bytes_read=1747129 bytes_retransmit=9 bytes_invalid=0 send_seq=160932 receive_seq=160932 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=150 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=1504579 sysload=0.94 cputime=236.538 memavail=7290964 print_time=4282.275 buffer_time=2.112 print_stall=0 extruder: target=240 temp=240.2 pwm=0.412
Stats 799057.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8489728 bytes_read=1747798 bytes_retransmit=9 bytes_invalid=0 send_seq=161007 receive_seq=161007 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=150 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=1505587 sysload=0.94 cputime=236.609 memavail=7290964 print_time=4283.358 buffer_time=2.194 print_stall=0 extruder: target=240 temp=240.3 pwm=0.331
Stats 799058.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8493425 bytes_read=1748426 bytes_retransmit=9 bytes_invalid=0 send_seq=161077 receive_seq=161077 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=80 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.506 sd_pos=1506436 sysload=0.94 cputime=236.696 memavail=7290964 print_time=4284.424 buffer_time=2.259 print_stall=0 extruder: target=240 temp=240.2 pwm=0.381
Stats 799059.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8497695 bytes_read=1749153 bytes_retransmit=9 bytes_invalid=0 send_seq=161161 receive_seq=161161 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=350 freq=119992760 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=1509138 sysload=0.94 cputime=236.791 memavail=7290968 print_time=4285.354 buffer_time=2.188 print_stall=0 extruder: target=240 temp=240.1 pwm=0.443
Stats 799060.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8501535 bytes_read=1749771 bytes_retransmit=9 bytes_invalid=0 send_seq=161229 receive_seq=161229 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=350 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=1509891 sysload=0.95 cputime=236.879 memavail=7290968 print_time=4286.346 buffer_time=2.180 print_stall=0 extruder: target=240 temp=239.8 pwm=0.543
Stats 799061.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8505315 bytes_read=1750424 bytes_retransmit=9 bytes_invalid=0 send_seq=161304 receive_seq=161304 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=280 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=1510885 sysload=0.95 cputime=236.967 memavail=7290968 print_time=4287.371 buffer_time=2.204 print_stall=0 extruder: target=240 temp=239.8 pwm=0.454
Stats 799062.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8510078 bytes_read=1751212 bytes_retransmit=9 bytes_invalid=0 send_seq=161397 receive_seq=161397 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=520 freq=119992732 heater_bed: target=80 temp=79.9 pwm=0.514 sd_pos=1513273 sysload=0.95 cputime=237.074 memavail=7290968 print_time=4288.556 buffer_time=2.388 print_stall=0 extruder: target=240 temp=240.0 pwm=0.420
Stats 799063.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8514280 bytes_read=1751905 bytes_retransmit=9 bytes_invalid=0 send_seq=161480 receive_seq=161480 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=623 freq=119992725 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=1514465 sysload=0.95 cputime=237.159 memavail=7290968 print_time=4289.760 buffer_time=2.591 print_stall=0 extruder: target=240 temp=240.1 pwm=0.420
Stats 799064.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8517970 bytes_read=1752558 bytes_retransmit=9 bytes_invalid=0 send_seq=161555 receive_seq=161555 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=320 freq=119992720 heater_bed: target=80 temp=79.9 pwm=0.460 sd_pos=1514911 sysload=0.95 cputime=237.233 memavail=7290968 print_time=4290.540 buffer_time=2.370 print_stall=0 extruder: target=240 temp=240.2 pwm=0.342
Stats 799065.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8522171 bytes_read=1753270 bytes_retransmit=9 bytes_invalid=0 send_seq=161636 receive_seq=161636 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=2980 freq=119992714 heater_bed: target=80 temp=79.9 pwm=0.460 sd_pos=1515803 sysload=0.87 cputime=237.317 memavail=7290968 print_time=4291.985 buffer_time=2.815 print_stall=0 extruder: target=240 temp=240.4 pwm=0.312
Stats 799066.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8525999 bytes_read=1753903 bytes_retransmit=9 bytes_invalid=0 send_seq=161707 receive_seq=161707 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=2629 freq=119992732 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=1516698 sysload=0.87 cputime=237.407 memavail=7290968 print_time=4292.676 buffer_time=2.504 print_stall=0 extruder: target=240 temp=240.2 pwm=0.374
Stats 799067.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8531157 bytes_read=1754657 bytes_retransmit=9 bytes_invalid=0 send_seq=161799 receive_seq=161799 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=2080 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.392 sd_pos=1517129 sysload=0.87 cputime=237.503 memavail=7290968 print_time=4293.589 buffer_time=2.417 print_stall=0 extruder: target=240 temp=239.8 pwm=0.540
Stats 799068.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8535880 bytes_read=1755384 bytes_retransmit=9 bytes_invalid=0 send_seq=161883 receive_seq=161883 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=1706 freq=119992721 heater_bed: target=80 temp=80.0 pwm=0.392 sd_pos=1517640 sysload=0.87 cputime=237.602 memavail=7290212 print_time=4294.551 buffer_time=2.377 print_stall=0 extruder: target=240 temp=239.9 pwm=0.472
Stats 799069.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8541138 bytes_read=1756112 bytes_retransmit=9 bytes_invalid=0 send_seq=161973 receive_seq=161973 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=736 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.320 sd_pos=1518466 sysload=0.87 cputime=237.711 memavail=7290220 print_time=4295.464 buffer_time=2.289 print_stall=0 extruder: target=240 temp=239.8 pwm=0.514
Stats 799070.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8545693 bytes_read=1756790 bytes_retransmit=9 bytes_invalid=0 send_seq=162053 receive_seq=162053 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=155 freq=119992720 heater_bed: target=80 temp=80.1 pwm=0.281 sd_pos=1518907 sysload=0.80 cputime=237.796 memavail=7290220 print_time=4296.285 buffer_time=2.111 print_stall=0 extruder: target=240 temp=239.9 pwm=0.438
Stats 799071.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8549762 bytes_read=1757443 bytes_retransmit=9 bytes_invalid=0 send_seq=162124 receive_seq=162124 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=269 freq=119992718 heater_bed: target=80 temp=80.1 pwm=0.444 sd_pos=1520036 sysload=0.80 cputime=237.896 memavail=7290220 print_time=4297.289 buffer_time=2.114 print_stall=0 extruder: target=240 temp=240.0 pwm=0.406
Stats 799072.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8554894 bytes_read=1758175 bytes_retransmit=9 bytes_invalid=0 send_seq=162213 receive_seq=162213 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=951 freq=119992717 heater_bed: target=80 temp=80.1 pwm=0.444 sd_pos=1521512 sysload=0.80 cputime=238.002 memavail=7290220 print_time=4298.611 buffer_time=2.435 print_stall=0 extruder: target=240 temp=240.2 pwm=0.406
Stats 799073.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8558956 bytes_read=1758817 bytes_retransmit=9 bytes_invalid=0 send_seq=162286 receive_seq=162286 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=898 freq=119992711 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=1522094 sysload=0.80 cputime=238.093 memavail=7290220 print_time=4299.488 buffer_time=2.311 print_stall=0 extruder: target=240 temp=239.8 pwm=0.552
Stats 799074.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8561947 bytes_read=1759409 bytes_retransmit=9 bytes_invalid=0 send_seq=162343 receive_seq=162343 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=30 freq=119992709 heater_bed: target=80 temp=80.0 pwm=0.537 sd_pos=1522257 sysload=0.80 cputime=238.181 memavail=7290220 print_time=4300.617 buffer_time=2.439 print_stall=0 extruder: target=240 temp=239.8 pwm=0.513
Stats 799075.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8563787 bytes_read=1759882 bytes_retransmit=9 bytes_invalid=0 send_seq=162382 receive_seq=162382 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992709 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=1522618 sysload=0.74 cputime=238.251 memavail=7290220 print_time=4301.393 buffer_time=2.215 print_stall=0 extruder: target=240 temp=240.0 pwm=0.475
Stats 799076.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8565486 bytes_read=1760355 bytes_retransmit=9 bytes_invalid=0 send_seq=162418 receive_seq=162418 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992709 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=1522785 sysload=0.74 cputime=238.311 memavail=7290220 print_time=4302.665 buffer_time=2.486 print_stall=0 extruder: target=240 temp=240.3 pwm=0.387
Stats 799077.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8567075 bytes_read=1760833 bytes_retransmit=9 bytes_invalid=0 send_seq=162452 receive_seq=162452 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992704 heater_bed: target=80 temp=80.1 pwm=0.406 sd_pos=1523172 sysload=0.74 cputime=238.369 memavail=7290220 print_time=4303.645 buffer_time=2.466 print_stall=0 extruder: target=240 temp=239.9 pwm=0.518
Stats 799078.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8571353 bytes_read=1761501 bytes_retransmit=9 bytes_invalid=0 send_seq=162530 receive_seq=162530 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992698 heater_bed: target=80 temp=80.1 pwm=0.406 sd_pos=1523754 sysload=0.74 cputime=238.439 memavail=7290220 print_time=4304.894 buffer_time=2.715 print_stall=0 extruder: target=240 temp=240.0 pwm=0.471
Stats 799079.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8575268 bytes_read=1762159 bytes_retransmit=9 bytes_invalid=0 send_seq=162603 receive_seq=162603 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992693 heater_bed: target=80 temp=80.1 pwm=0.406 sd_pos=1524182 sysload=0.74 cputime=238.505 memavail=7290224 print_time=4305.668 buffer_time=2.488 print_stall=0 extruder: target=240 temp=240.0 pwm=0.459
Stats 799080.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8577746 bytes_read=1762701 bytes_retransmit=9 bytes_invalid=0 send_seq=162653 receive_seq=162653 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=835 freq=119992708 heater_bed: target=80 temp=80.1 pwm=0.340 sd_pos=1524679 sysload=0.68 cputime=238.574 memavail=7290224 print_time=4306.349 buffer_time=2.168 print_stall=0 extruder: target=240 temp=240.0 pwm=0.412
Stats 799081.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8582518 bytes_read=1763399 bytes_retransmit=9 bytes_invalid=0 send_seq=162737 receive_seq=162737 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=2747 freq=119992701 heater_bed: target=80 temp=80.1 pwm=0.340 sd_pos=1525643 sysload=0.68 cputime=238.673 memavail=7290224 print_time=4307.799 buffer_time=2.617 print_stall=0 extruder: target=240 temp=239.9 pwm=0.444
Stats 799082.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8587262 bytes_read=1764118 bytes_retransmit=9 bytes_invalid=0 send_seq=162819 receive_seq=162819 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1256 freq=119992694 heater_bed: target=80 temp=80.1 pwm=0.420 sd_pos=1525938 sysload=0.68 cputime=238.758 memavail=7290224 print_time=4308.431 buffer_time=2.249 print_stall=0 extruder: target=240 temp=239.9 pwm=0.460
Stats 799083.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8592577 bytes_read=1764865 bytes_retransmit=9 bytes_invalid=0 send_seq=162910 receive_seq=162910 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1689 freq=119992694 heater_bed: target=80 temp=80.1 pwm=0.339 sd_pos=1526893 sysload=0.68 cputime=238.862 memavail=7290224 print_time=4309.740 buffer_time=2.557 print_stall=0 extruder: target=240 temp=240.0 pwm=0.451
Stats 799084.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8597030 bytes_read=1765543 bytes_retransmit=9 bytes_invalid=0 send_seq=162990 receive_seq=162990 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=860 freq=119992692 heater_bed: target=80 temp=80.1 pwm=0.299 sd_pos=1527433 sysload=0.68 cputime=238.943 memavail=7289616 print_time=4310.577 buffer_time=2.393 print_stall=0 extruder: target=240 temp=240.1 pwm=0.451
Stats 799085.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8601285 bytes_read=1766216 bytes_retransmit=9 bytes_invalid=0 send_seq=163066 receive_seq=163066 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=2735 freq=119992731 heater_bed: target=80 temp=80.1 pwm=0.350 sd_pos=1528514 sysload=0.62 cputime=239.028 memavail=7289692 print_time=4311.966 buffer_time=2.782 print_stall=0 extruder: target=240 temp=240.1 pwm=0.371
Stats 799086.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8606038 bytes_read=1766918 bytes_retransmit=9 bytes_invalid=0 send_seq=163148 receive_seq=163148 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1232 freq=119992783 heater_bed: target=80 temp=80.1 pwm=0.433 sd_pos=1528737 sysload=0.62 cputime=239.099 memavail=7289692 print_time=4312.632 buffer_time=2.448 print_stall=0 extruder: target=240 temp=240.1 pwm=0.399
Stats 799087.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8610560 bytes_read=1767607 bytes_retransmit=9 bytes_invalid=0 send_seq=163227 receive_seq=163227 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=854 freq=119992774 heater_bed: target=80 temp=80.1 pwm=0.506 sd_pos=1529324 sysload=0.62 cputime=239.160 memavail=7289692 print_time=4313.559 buffer_time=2.374 print_stall=0 extruder: target=240 temp=240.2 pwm=0.379
Stats 799088.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8614793 bytes_read=1768275 bytes_retransmit=9 bytes_invalid=0 send_seq=163302 receive_seq=163302 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=134 freq=119992763 heater_bed: target=80 temp=80.1 pwm=0.357 sd_pos=1530201 sysload=0.62 cputime=239.230 memavail=7289692 print_time=4314.216 buffer_time=2.030 print_stall=0 extruder: target=240 temp=240.2 pwm=0.356
Stats 799089.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8619081 bytes_read=1768937 bytes_retransmit=9 bytes_invalid=0 send_seq=163376 receive_seq=163376 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=3 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.1 pwm=0.357 sd_pos=1531255 sysload=0.62 cputime=239.312 memavail=7289472 print_time=4315.455 buffer_time=2.269 print_stall=0 extruder: target=240 temp=240.3 pwm=0.289
Stats 799090.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8623620 bytes_read=1769635 bytes_retransmit=9 bytes_invalid=0 send_seq=163460 receive_seq=163460 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.1 pwm=0.308 sd_pos=1532398 sysload=0.57 cputime=239.389 memavail=7289472 print_time=4316.591 buffer_time=2.405 print_stall=0 extruder: target=240 temp=240.0 pwm=0.487
Stats 799091.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8627383 bytes_read=1770273 bytes_retransmit=9 bytes_invalid=0 send_seq=163529 receive_seq=163529 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.1 pwm=0.475 sd_pos=1534008 sysload=0.57 cputime=239.466 memavail=7289472 print_time=4317.458 buffer_time=2.271 print_stall=0 extruder: target=240 temp=239.9 pwm=0.506
Stats 799092.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8631278 bytes_read=1770931 bytes_retransmit=9 bytes_invalid=0 send_seq=163599 receive_seq=163599 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=80.2 pwm=0.287 sd_pos=1535744 sysload=0.57 cputime=239.546 memavail=7289472 print_time=4318.643 buffer_time=2.456 print_stall=0 extruder: target=240 temp=240.1 pwm=0.391
Stats 799093.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8633515 bytes_read=1771439 bytes_retransmit=9 bytes_invalid=0 send_seq=163645 receive_seq=163645 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.1 pwm=0.460 sd_pos=1535976 sysload=0.57 cputime=239.603 memavail=7289472 print_time=4319.234 buffer_time=2.046 print_stall=0 extruder: target=240 temp=240.2 pwm=0.391
Stats 799094.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8635473 bytes_read=1771942 bytes_retransmit=9 bytes_invalid=0 send_seq=163687 receive_seq=163687 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.1 pwm=0.418 sd_pos=1536208 sysload=0.57 cputime=239.668 memavail=7289472 print_time=4320.419 buffer_time=2.231 print_stall=0 extruder: target=240 temp=239.9 pwm=0.508
Stats 799095.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8638707 bytes_read=1772549 bytes_retransmit=9 bytes_invalid=0 send_seq=163750 receive_seq=163750 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.1 pwm=0.357 sd_pos=1537635 sysload=0.53 cputime=239.748 memavail=7289472 print_time=4321.688 buffer_time=2.500 print_stall=0 extruder: target=240 temp=240.2 pwm=0.344
Stats 799096.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=8641459 bytes_read=1773102 bytes_retransmit=9 bytes_invalid=0 send_seq=163805 receive_seq=163805 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=80 temp=80.2 pwm=0.327 sd_pos=1537938 sysload=0.53 cputime=239.807 memavail=7289472 print_time=4322.394 buffer_time=2.205 print_stall=0 extruder: target=240 temp=240.1 pwm=0.402
Stats 799097.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8644957 bytes_read=1773756 bytes_retransmit=9 bytes_invalid=0 send_seq=163874 receive_seq=163874 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992728 heater_bed: target=80 temp=80.1 pwm=0.413 sd_pos=1538778 sysload=0.53 cputime=239.873 memavail=7289024 print_time=4323.488 buffer_time=2.299 print_stall=0 extruder: target=240 temp=240.0 pwm=0.470
Stats 799098.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8649122 bytes_read=1774438 bytes_retransmit=9 bytes_invalid=0 send_seq=163952 receive_seq=163952 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.1 pwm=0.372 sd_pos=1539533 sysload=0.53 cputime=239.951 memavail=7289028 print_time=4324.635 buffer_time=2.445 print_stall=0 extruder: target=240 temp=240.1 pwm=0.371
Stats 799099.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8652175 bytes_read=1775016 bytes_retransmit=9 bytes_invalid=0 send_seq=164012 receive_seq=164012 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.1 pwm=0.399 sd_pos=1540314 sysload=0.53 cputime=240.018 memavail=7289028 print_time=4325.648 buffer_time=2.458 print_stall=0 extruder: target=240 temp=239.8 pwm=0.440
Stats 799100.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8654662 bytes_read=1775554 bytes_retransmit=9 bytes_invalid=0 send_seq=164061 receive_seq=164061 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.1 pwm=0.493 sd_pos=1540777 sysload=0.48 cputime=240.071 memavail=7289028 print_time=4326.285 buffer_time=2.094 print_stall=0 extruder: target=240 temp=240.1 pwm=0.349
Stats 799101.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8658727 bytes_read=1776221 bytes_retransmit=9 bytes_invalid=0 send_seq=164136 receive_seq=164136 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.1 pwm=0.416 sd_pos=1541608 sysload=0.48 cputime=240.142 memavail=7289028 print_time=4327.240 buffer_time=2.049 print_stall=0 extruder: target=240 temp=240.1 pwm=0.364
Stats 799102.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8663752 bytes_read=1776965 bytes_retransmit=9 bytes_invalid=0 send_seq=164226 receive_seq=164226 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1784 freq=119992783 heater_bed: target=80 temp=80.1 pwm=0.467 sd_pos=1542504 sysload=0.48 cputime=240.237 memavail=7289028 print_time=4328.834 buffer_time=2.644 print_stall=0 extruder: target=240 temp=239.9 pwm=0.475
Stats 799103.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8667946 bytes_read=1777623 bytes_retransmit=9 bytes_invalid=0 send_seq=164299 receive_seq=164299 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1021 freq=119992775 heater_bed: target=80 temp=80.1 pwm=0.342 sd_pos=1542999 sysload=0.48 cputime=240.322 memavail=7289028 print_time=4329.480 buffer_time=2.290 print_stall=0 extruder: target=240 temp=239.9 pwm=0.450
Stats 799104.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8672204 bytes_read=1778280 bytes_retransmit=9 bytes_invalid=0 send_seq=164372 receive_seq=164372 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=874 freq=119992771 heater_bed: target=80 temp=80.1 pwm=0.448 sd_pos=1543530 sysload=0.48 cputime=240.412 memavail=7289028 print_time=4330.222 buffer_time=2.030 print_stall=0 extruder: target=240 temp=239.8 pwm=0.512
Stats 799105.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8677017 bytes_read=1778973 bytes_retransmit=9 bytes_invalid=0 send_seq=164455 receive_seq=164455 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=4506 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=1545924 sysload=0.44 cputime=240.538 memavail=7289028 print_time=4332.023 buffer_time=2.830 print_stall=0 extruder: target=240 temp=239.9 pwm=0.396
Stats 799106.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8682353 bytes_read=1779724 bytes_retransmit=9 bytes_invalid=0 send_seq=164547 receive_seq=164547 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=1661 freq=119992757 heater_bed: target=80 temp=80.1 pwm=0.366 sd_pos=1546267 sysload=0.44 cputime=240.638 memavail=7289028 print_time=4332.464 buffer_time=2.271 print_stall=0 extruder: target=240 temp=240.0 pwm=0.380
Stats 799107.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8687073 bytes_read=1780428 bytes_retransmit=9 bytes_invalid=0 send_seq=164628 receive_seq=164628 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=4925 freq=119992750 heater_bed: target=80 temp=80.1 pwm=0.308 sd_pos=1548263 sysload=0.44 cputime=240.758 memavail=7289028 print_time=4334.078 buffer_time=2.881 print_stall=0 extruder: target=240 temp=240.1 pwm=0.325
Stats 799108.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8692159 bytes_read=1781139 bytes_retransmit=9 bytes_invalid=0 send_seq=164716 receive_seq=164716 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2112 freq=119992793 heater_bed: target=80 temp=80.1 pwm=0.338 sd_pos=1548485 sysload=0.44 cputime=240.856 memavail=7288272 print_time=4334.574 buffer_time=2.376 print_stall=0 extruder: target=240 temp=240.1 pwm=0.397
Stats 799109.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8695378 bytes_read=1781726 bytes_retransmit=9 bytes_invalid=0 send_seq=164775 receive_seq=164775 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=80.1 pwm=0.448 sd_pos=1548539 sysload=0.44 cputime=240.939 memavail=7288272 print_time=4335.331 buffer_time=2.133 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 799110.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8698253 bytes_read=1782303 bytes_retransmit=9 bytes_invalid=0 send_seq=164832 receive_seq=164832 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.1 pwm=0.445 sd_pos=1549064 sysload=0.65 cputime=241.011 memavail=7288272 print_time=4336.517 buffer_time=2.318 print_stall=0 extruder: target=240 temp=239.9 pwm=0.415
Stats 799111.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8699107 bytes_read=1782696 bytes_retransmit=9 bytes_invalid=0 send_seq=164855 receive_seq=164855 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.1 pwm=0.335 sd_pos=1549121 sysload=0.65 cputime=241.072 memavail=7288048 print_time=4337.407 buffer_time=2.208 print_stall=0 extruder: target=240 temp=239.7 pwm=0.570
Stats 799112.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8700993 bytes_read=1783200 bytes_retransmit=9 bytes_invalid=0 send_seq=164894 receive_seq=164894 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=1549558 sysload=0.65 cputime=241.138 memavail=7288048 print_time=4338.401 buffer_time=2.201 print_stall=0 extruder: target=240 temp=239.7 pwm=0.483
Stats 799113.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8705804 bytes_read=1783927 bytes_retransmit=9 bytes_invalid=0 send_seq=164981 receive_seq=164981 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=1550250 sysload=0.65 cputime=241.208 memavail=7288048 print_time=4339.722 buffer_time=2.520 print_stall=0 extruder: target=240 temp=239.9 pwm=0.409
Stats 799114.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8709899 bytes_read=1784580 bytes_retransmit=9 bytes_invalid=0 send_seq=165056 receive_seq=165056 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=119 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=1550742 sysload=0.65 cputime=241.275 memavail=7287944 print_time=4340.587 buffer_time=2.384 print_stall=0 extruder: target=240 temp=239.8 pwm=0.474
Stats 799115.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8712644 bytes_read=1785138 bytes_retransmit=9 bytes_invalid=0 send_seq=165109 receive_seq=165109 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=3020 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1551585 sysload=0.60 cputime=241.356 memavail=7288024 print_time=4341.771 buffer_time=2.567 print_stall=0 extruder: target=240 temp=239.8 pwm=0.488
Stats 799116.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=8717560 bytes_read=1785865 bytes_retransmit=9 bytes_invalid=0 send_seq=165196 receive_seq=165196 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=1275 freq=119992727 heater_bed: target=80 temp=80.1 pwm=0.324 sd_pos=1552113 sysload=0.60 cputime=241.464 memavail=7288024 print_time=4342.322 buffer_time=2.117 print_stall=0 extruder: target=240 temp=239.9 pwm=0.432
Stats 799117.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8722948 bytes_read=1786635 bytes_retransmit=9 bytes_invalid=0 send_seq=165289 receive_seq=165289 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2779 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=1553073 sysload=0.60 cputime=241.576 memavail=7288024 print_time=4343.706 buffer_time=2.501 print_stall=0 extruder: target=240 temp=240.0 pwm=0.432
Stats 799118.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8727751 bytes_read=1787338 bytes_retransmit=9 bytes_invalid=0 send_seq=165371 receive_seq=165371 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=1576 freq=119992731 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1553534 sysload=0.60 cputime=241.680 memavail=7287672 print_time=4344.399 buffer_time=2.192 print_stall=0 extruder: target=240 temp=240.1 pwm=0.432
Stats 799119.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8732760 bytes_read=1788065 bytes_retransmit=9 bytes_invalid=0 send_seq=165458 receive_seq=165458 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=4159 freq=119992732 heater_bed: target=80 temp=80.1 pwm=0.344 sd_pos=1554847 sysload=0.60 cputime=241.799 memavail=7287776 print_time=4346.076 buffer_time=2.869 print_stall=0 extruder: target=240 temp=240.0 pwm=0.424
Stats 799120.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8738133 bytes_read=1788818 bytes_retransmit=9 bytes_invalid=0 send_seq=165553 receive_seq=165553 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=2218 freq=119992723 heater_bed: target=80 temp=80.1 pwm=0.404 sd_pos=1555298 sysload=0.63 cputime=241.906 memavail=7287776 print_time=4346.673 buffer_time=2.465 print_stall=0 extruder: target=240 temp=239.8 pwm=0.532
Stats 799121.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8743194 bytes_read=1789546 bytes_retransmit=9 bytes_invalid=0 send_seq=165640 receive_seq=165640 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=1263 freq=119992757 heater_bed: target=80 temp=80.1 pwm=0.373 sd_pos=1556136 sysload=0.63 cputime=242.020 memavail=7287776 print_time=4347.487 buffer_time=2.278 print_stall=0 extruder: target=240 temp=240.0 pwm=0.379
Stats 799122.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8747588 bytes_read=1790234 bytes_retransmit=9 bytes_invalid=0 send_seq=165716 receive_seq=165716 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1302 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=1557123 sysload=0.63 cputime=242.125 memavail=7287776 print_time=4348.394 buffer_time=2.184 print_stall=0 extruder: target=240 temp=240.1 pwm=0.379
Stats 799123.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8752635 bytes_read=1790947 bytes_retransmit=9 bytes_invalid=0 send_seq=165803 receive_seq=165803 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=3172 freq=119992742 heater_bed: target=80 temp=80.1 pwm=0.328 sd_pos=1558440 sysload=0.63 cputime=242.231 memavail=7287776 print_time=4349.826 buffer_time=2.615 print_stall=0 extruder: target=240 temp=240.1 pwm=0.461
Stats 799124.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8757277 bytes_read=1791650 bytes_retransmit=9 bytes_invalid=0 send_seq=165885 receive_seq=165885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=2191 freq=119992741 heater_bed: target=80 temp=80.1 pwm=0.403 sd_pos=1559554 sysload=0.63 cputime=242.328 memavail=7287776 print_time=4350.477 buffer_time=2.265 print_stall=0 extruder: target=240 temp=240.2 pwm=0.410
Stats 799125.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8762488 bytes_read=1792392 bytes_retransmit=9 bytes_invalid=0 send_seq=165975 receive_seq=165975 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=791 freq=119992745 heater_bed: target=80 temp=80.1 pwm=0.326 sd_pos=1560360 sysload=0.58 cputime=242.429 memavail=7287776 print_time=4351.476 buffer_time=2.264 print_stall=0 extruder: target=240 temp=240.0 pwm=0.511
Stats 799126.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8766830 bytes_read=1793045 bytes_retransmit=9 bytes_invalid=0 send_seq=166050 receive_seq=166050 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.1 pwm=0.382 sd_pos=1561572 sysload=0.58 cputime=242.526 memavail=7287776 print_time=4352.250 buffer_time=2.037 print_stall=0 extruder: target=240 temp=240.0 pwm=0.445
Stats 799127.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8769917 bytes_read=1793649 bytes_retransmit=9 bytes_invalid=0 send_seq=166109 receive_seq=166109 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.1 pwm=0.382 sd_pos=1562710 sysload=0.58 cputime=242.614 memavail=7287552 print_time=4353.371 buffer_time=2.157 print_stall=0 extruder: target=240 temp=239.9 pwm=0.445
Stats 799128.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8774224 bytes_read=1794351 bytes_retransmit=9 bytes_invalid=0 send_seq=166191 receive_seq=166191 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992732 heater_bed: target=80 temp=80.1 pwm=0.382 sd_pos=1564076 sysload=0.58 cputime=242.694 memavail=7287552 print_time=4354.501 buffer_time=2.286 print_stall=0 extruder: target=240 temp=239.8 pwm=0.506
Stats 799129.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8775557 bytes_read=1794779 bytes_retransmit=9 bytes_invalid=0 send_seq=166221 receive_seq=166221 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992732 heater_bed: target=80 temp=80.1 pwm=0.455 sd_pos=1564221 sysload=0.58 cputime=242.749 memavail=7287552 print_time=4355.467 buffer_time=2.251 print_stall=0 extruder: target=240 temp=240.1 pwm=0.430
Stats 799130.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8778014 bytes_read=1795327 bytes_retransmit=9 bytes_invalid=0 send_seq=166272 receive_seq=166272 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119992732 heater_bed: target=80 temp=80.1 pwm=0.443 sd_pos=1565038 sysload=0.61 cputime=242.826 memavail=7287552 print_time=4356.554 buffer_time=2.337 print_stall=0 extruder: target=240 temp=240.2 pwm=0.323
Stats 799131.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8781512 bytes_read=1795954 bytes_retransmit=9 bytes_invalid=0 send_seq=166339 receive_seq=166339 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=80.1 pwm=0.368 sd_pos=1565587 sysload=0.61 cputime=242.894 memavail=7287552 print_time=4357.541 buffer_time=2.324 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 799132.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8784857 bytes_read=1796558 bytes_retransmit=9 bytes_invalid=0 send_seq=166401 receive_seq=166401 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992718 heater_bed: target=80 temp=80.1 pwm=0.446 sd_pos=1566272 sysload=0.61 cputime=242.979 memavail=7287552 print_time=4358.553 buffer_time=2.335 print_stall=0 extruder: target=240 temp=240.1 pwm=0.418
Stats 799133.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8788694 bytes_read=1797206 bytes_retransmit=9 bytes_invalid=0 send_seq=166472 receive_seq=166472 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992715 heater_bed: target=80 temp=80.1 pwm=0.386 sd_pos=1566957 sysload=0.61 cputime=243.053 memavail=7287552 print_time=4359.708 buffer_time=2.489 print_stall=0 extruder: target=240 temp=240.0 pwm=0.418
Stats 799134.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8791924 bytes_read=1797808 bytes_retransmit=9 bytes_invalid=0 send_seq=166534 receive_seq=166534 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.1 pwm=0.386 sd_pos=1567568 sysload=0.61 cputime=243.126 memavail=7287552 print_time=4360.742 buffer_time=2.522 print_stall=0 extruder: target=240 temp=239.8 pwm=0.453
Stats 799135.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8795917 bytes_read=1798456 bytes_retransmit=9 bytes_invalid=0 send_seq=166608 receive_seq=166608 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.1 pwm=0.465 sd_pos=1568353 sysload=0.56 cputime=243.198 memavail=7281252 print_time=4361.918 buffer_time=2.698 print_stall=0 extruder: target=240 temp=240.1 pwm=0.320
Stats 799136.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8798990 bytes_read=1799049 bytes_retransmit=9 bytes_invalid=0 send_seq=166668 receive_seq=166668 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.1 pwm=0.412 sd_pos=1568772 sysload=0.56 cputime=243.251 memavail=7289320 print_time=4362.658 buffer_time=2.438 print_stall=0 extruder: target=240 temp=239.8 pwm=0.478
Stats 799137.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8802972 bytes_read=1799732 bytes_retransmit=9 bytes_invalid=0 send_seq=166743 receive_seq=166743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2236 freq=119992729 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=1570219 sysload=0.56 cputime=243.326 memavail=7289320 print_time=4364.057 buffer_time=2.835 print_stall=0 extruder: target=240 temp=239.9 pwm=0.393
Stats 799138.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8806650 bytes_read=1800340 bytes_retransmit=9 bytes_invalid=0 send_seq=166809 receive_seq=166809 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=2268 freq=119992722 heater_bed: target=80 temp=80.0 pwm=0.342 sd_pos=1570675 sysload=0.56 cputime=243.392 memavail=7289068 print_time=4364.843 buffer_time=2.621 print_stall=0 extruder: target=240 temp=240.0 pwm=0.424
Stats 799139.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8811387 bytes_read=1801043 bytes_retransmit=9 bytes_invalid=0 send_seq=166891 receive_seq=166891 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1824 freq=119992780 heater_bed: target=80 temp=80.1 pwm=0.341 sd_pos=1571308 sysload=0.56 cputime=243.469 memavail=7289068 print_time=4365.602 buffer_time=2.380 print_stall=0 extruder: target=240 temp=240.0 pwm=0.400
Stats 799140.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=8815799 bytes_read=1801710 bytes_retransmit=9 bytes_invalid=0 send_seq=166966 receive_seq=166966 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=1068 freq=119992774 heater_bed: target=80 temp=80.1 pwm=0.398 sd_pos=1571763 sysload=0.52 cputime=243.544 memavail=7289068 print_time=4366.430 buffer_time=2.207 print_stall=0 extruder: target=240 temp=240.1 pwm=0.421
Stats 799141.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8820758 bytes_read=1802429 bytes_retransmit=9 bytes_invalid=0 send_seq=167051 receive_seq=167051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2441 freq=119992764 heater_bed: target=80 temp=80.1 pwm=0.398 sd_pos=1573316 sysload=0.52 cputime=243.655 memavail=7289068 print_time=4367.799 buffer_time=2.575 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 799142.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8825534 bytes_read=1803139 bytes_retransmit=9 bytes_invalid=0 send_seq=167135 receive_seq=167135 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=1834 freq=119992761 heater_bed: target=80 temp=80.1 pwm=0.409 sd_pos=1573935 sysload=0.52 cputime=243.758 memavail=7289068 print_time=4368.665 buffer_time=2.440 print_stall=0 extruder: target=240 temp=240.0 pwm=0.490
Stats 799143.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8830313 bytes_read=1803842 bytes_retransmit=9 bytes_invalid=0 send_seq=167219 receive_seq=167219 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=512 freq=119992761 heater_bed: target=80 temp=80.1 pwm=0.409 sd_pos=1574598 sysload=0.52 cputime=243.859 memavail=7289068 print_time=4369.518 buffer_time=2.293 print_stall=0 extruder: target=240 temp=239.8 pwm=0.522
Stats 799144.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8834079 bytes_read=1804450 bytes_retransmit=9 bytes_invalid=0 send_seq=167286 receive_seq=167286 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.1 pwm=0.439 sd_pos=1575290 sysload=0.52 cputime=243.949 memavail=7288636 print_time=4370.124 buffer_time=1.898 print_stall=0 extruder: target=240 temp=239.9 pwm=0.426
Stats 799145.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8837634 bytes_read=1805078 bytes_retransmit=9 bytes_invalid=0 send_seq=167353 receive_seq=167353 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992775 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=1575650 sysload=0.56 cputime=243.999 memavail=7288824 print_time=4371.569 buffer_time=2.342 print_stall=0 extruder: target=240 temp=240.0 pwm=0.426
Stats 799146.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8839625 bytes_read=1805580 bytes_retransmit=9 bytes_invalid=0 send_seq=167395 receive_seq=167395 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=1576007 sysload=0.56 cputime=244.040 memavail=7288824 print_time=4372.327 buffer_time=2.099 print_stall=0 extruder: target=240 temp=239.9 pwm=0.480
Stats 799147.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8843201 bytes_read=1806209 bytes_retransmit=9 bytes_invalid=0 send_seq=167462 receive_seq=167462 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1576586 sysload=0.56 cputime=244.104 memavail=7288600 print_time=4373.417 buffer_time=2.189 print_stall=0 extruder: target=240 temp=240.1 pwm=0.418
Stats 799148.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8844007 bytes_read=1806617 bytes_retransmit=9 bytes_invalid=0 send_seq=167485 receive_seq=167485 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992806 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1576643 sysload=0.56 cputime=244.166 memavail=7288600 print_time=4374.326 buffer_time=2.098 print_stall=0 extruder: target=240 temp=239.9 pwm=0.501
Stats 799149.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8848860 bytes_read=1807344 bytes_retransmit=9 bytes_invalid=0 send_seq=167572 receive_seq=167572 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.445 sd_pos=1577746 sysload=0.56 cputime=244.247 memavail=7288600 print_time=4375.904 buffer_time=2.674 print_stall=0 extruder: target=240 temp=239.9 pwm=0.427
Stats 799150.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8852696 bytes_read=1807987 bytes_retransmit=9 bytes_invalid=0 send_seq=167645 receive_seq=167645 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=1578468 sysload=0.51 cputime=244.314 memavail=7288600 print_time=4376.701 buffer_time=2.472 print_stall=0 extruder: target=240 temp=239.9 pwm=0.454
Stats 799151.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8855922 bytes_read=1808580 bytes_retransmit=9 bytes_invalid=0 send_seq=167705 receive_seq=167705 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=433 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=1579073 sysload=0.51 cputime=244.390 memavail=7288600 print_time=4377.450 buffer_time=2.220 print_stall=0 extruder: target=240 temp=239.8 pwm=0.496
Stats 799152.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8859849 bytes_read=1809243 bytes_retransmit=9 bytes_invalid=0 send_seq=167776 receive_seq=167776 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=264 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=1579854 sysload=0.51 cputime=244.480 memavail=7288600 print_time=4378.238 buffer_time=2.007 print_stall=0 extruder: target=240 temp=239.9 pwm=0.443
Stats 799153.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8864451 bytes_read=1809921 bytes_retransmit=9 bytes_invalid=0 send_seq=167856 receive_seq=167856 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.322 sd_pos=1580327 sysload=0.51 cputime=244.565 memavail=7288600 print_time=4379.315 buffer_time=2.084 print_stall=0 extruder: target=240 temp=240.0 pwm=0.443
Stats 799154.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8869446 bytes_read=1810649 bytes_retransmit=9 bytes_invalid=0 send_seq=167943 receive_seq=167943 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=31 upcoming_bytes=2029 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=1581641 sysload=0.51 cputime=244.677 memavail=7288600 print_time=4380.730 buffer_time=2.497 print_stall=0 extruder: target=240 temp=240.0 pwm=0.444
Stats 799155.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8873525 bytes_read=1811306 bytes_retransmit=9 bytes_invalid=0 send_seq=168016 receive_seq=168016 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1745 freq=119992761 heater_bed: target=80 temp=80.1 pwm=0.326 sd_pos=1582369 sysload=0.47 cputime=244.776 memavail=7288600 print_time=4381.522 buffer_time=2.289 print_stall=0 extruder: target=240 temp=240.2 pwm=0.329
Stats 799156.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8878368 bytes_read=1812004 bytes_retransmit=9 bytes_invalid=0 send_seq=168100 receive_seq=168100 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=1666 freq=119992749 heater_bed: target=80 temp=80.1 pwm=0.349 sd_pos=1583188 sysload=0.47 cputime=244.880 memavail=7288600 print_time=4382.675 buffer_time=2.442 print_stall=0 extruder: target=240 temp=240.2 pwm=0.389
Stats 799157.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8883207 bytes_read=1812733 bytes_retransmit=9 bytes_invalid=0 send_seq=168184 receive_seq=168184 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=1583494 sysload=0.47 cputime=244.960 memavail=7288536 print_time=4383.302 buffer_time=2.067 print_stall=0 extruder: target=240 temp=240.1 pwm=0.388
Stats 799158.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8888207 bytes_read=1813475 bytes_retransmit=9 bytes_invalid=0 send_seq=168274 receive_seq=168274 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=1691 freq=119992732 heater_bed: target=80 temp=80.0 pwm=0.371 sd_pos=1585107 sysload=0.47 cputime=245.064 memavail=7288408 print_time=4384.768 buffer_time=2.533 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 799159.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8892299 bytes_read=1814118 bytes_retransmit=9 bytes_invalid=0 send_seq=168347 receive_seq=168347 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=959 freq=119992725 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=1586111 sysload=0.47 cputime=245.157 memavail=7288416 print_time=4385.459 buffer_time=2.224 print_stall=0 extruder: target=240 temp=240.1 pwm=0.417
Stats 799160.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8896413 bytes_read=1814776 bytes_retransmit=9 bytes_invalid=0 send_seq=168420 receive_seq=168420 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992718 heater_bed: target=80 temp=80.1 pwm=0.322 sd_pos=1586851 sysload=0.43 cputime=245.248 memavail=7288416 print_time=4386.353 buffer_time=2.117 print_stall=0 extruder: target=240 temp=239.9 pwm=0.468
Stats 799161.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8898232 bytes_read=1815263 bytes_retransmit=9 bytes_invalid=0 send_seq=168459 receive_seq=168459 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992719 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=1587223 sysload=0.43 cputime=245.322 memavail=7288416 print_time=4387.244 buffer_time=2.009 print_stall=0 extruder: target=240 temp=240.1 pwm=0.350
Stats 799162.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8901121 bytes_read=1815842 bytes_retransmit=9 bytes_invalid=0 send_seq=168516 receive_seq=168516 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992711 heater_bed: target=80 temp=80.1 pwm=0.301 sd_pos=1587870 sysload=0.43 cputime=245.387 memavail=7288416 print_time=4388.237 buffer_time=2.001 print_stall=0 extruder: target=240 temp=239.9 pwm=0.486
Stats 799163.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8904388 bytes_read=1816455 bytes_retransmit=9 bytes_invalid=0 send_seq=168580 receive_seq=168580 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992705 heater_bed: target=80 temp=80.1 pwm=0.367 sd_pos=1588453 sysload=0.43 cputime=245.460 memavail=7288416 print_time=4389.527 buffer_time=2.291 print_stall=0 extruder: target=240 temp=240.1 pwm=0.346
Stats 799164.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8905256 bytes_read=1816867 bytes_retransmit=9 bytes_invalid=0 send_seq=168604 receive_seq=168604 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992701 heater_bed: target=80 temp=80.1 pwm=0.409 sd_pos=1588510 sysload=0.43 cputime=245.525 memavail=7288416 print_time=4390.436 buffer_time=2.198 print_stall=0 extruder: target=240 temp=240.0 pwm=0.455
Stats 799165.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8908603 bytes_read=1817465 bytes_retransmit=9 bytes_invalid=0 send_seq=168668 receive_seq=168668 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992699 heater_bed: target=80 temp=80.1 pwm=0.380 sd_pos=1589205 sysload=0.40 cputime=245.602 memavail=7288416 print_time=4391.515 buffer_time=2.276 print_stall=0 extruder: target=240 temp=240.0 pwm=0.440
Stats 799166.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8911995 bytes_read=1818093 bytes_retransmit=9 bytes_invalid=0 send_seq=168735 receive_seq=168735 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992700 heater_bed: target=80 temp=80.1 pwm=0.385 sd_pos=1590283 sysload=0.40 cputime=245.672 memavail=7288416 print_time=4392.266 buffer_time=2.027 print_stall=0 extruder: target=240 temp=239.8 pwm=0.523
Stats 799167.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8916934 bytes_read=1818846 bytes_retransmit=9 bytes_invalid=0 send_seq=168824 receive_seq=168824 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1710 freq=119992694 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=1591584 sysload=0.40 cputime=245.767 memavail=7288416 print_time=4393.540 buffer_time=2.301 print_stall=0 extruder: target=240 temp=239.9 pwm=0.460
Stats 799168.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8921198 bytes_read=1819489 bytes_retransmit=9 bytes_invalid=0 send_seq=168897 receive_seq=168897 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=1205 freq=119992694 heater_bed: target=80 temp=80.1 pwm=0.335 sd_pos=1592988 sysload=0.40 cputime=245.869 memavail=7288416 print_time=4394.328 buffer_time=2.089 print_stall=0 extruder: target=240 temp=239.7 pwm=0.532
Stats 799169.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8926625 bytes_read=1820247 bytes_retransmit=9 bytes_invalid=0 send_seq=168990 receive_seq=168990 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2730 freq=119992691 heater_bed: target=80 temp=80.1 pwm=0.342 sd_pos=1594822 sysload=0.40 cputime=245.998 memavail=7288420 print_time=4395.873 buffer_time=2.632 print_stall=0 extruder: target=240 temp=239.8 pwm=0.495
Stats 799170.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8931574 bytes_read=1820969 bytes_retransmit=9 bytes_invalid=0 send_seq=169076 receive_seq=169076 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=753 freq=119992717 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=1595237 sysload=0.37 cputime=246.093 memavail=7288420 print_time=4396.398 buffer_time=2.157 print_stall=0 extruder: target=240 temp=240.0 pwm=0.383
Stats 799171.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8936208 bytes_read=1821647 bytes_retransmit=9 bytes_invalid=0 send_seq=169156 receive_seq=169156 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992713 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1596616 sysload=0.37 cputime=246.192 memavail=7288420 print_time=4397.294 buffer_time=2.052 print_stall=0 extruder: target=240 temp=240.1 pwm=0.383
Stats 799172.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8941099 bytes_read=1822376 bytes_retransmit=9 bytes_invalid=0 send_seq=169240 receive_seq=169240 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1245 freq=119992707 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1597645 sysload=0.37 cputime=246.298 memavail=7288420 print_time=4398.581 buffer_time=2.338 print_stall=0 extruder: target=240 temp=240.1 pwm=0.374
Stats 799173.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8945357 bytes_read=1823043 bytes_retransmit=9 bytes_invalid=0 send_seq=169315 receive_seq=169315 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=588 freq=119992704 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1598475 sysload=0.37 cputime=246.394 memavail=7288420 print_time=4399.528 buffer_time=2.284 print_stall=0 extruder: target=240 temp=240.1 pwm=0.414
Stats 799174.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8947726 bytes_read=1823551 bytes_retransmit=9 bytes_invalid=0 send_seq=169361 receive_seq=169361 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992703 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=1598794 sysload=0.37 cputime=246.471 memavail=7288092 print_time=4400.414 buffer_time=2.169 print_stall=0 extruder: target=240 temp=239.9 pwm=0.494
Stats 799175.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8952325 bytes_read=1824279 bytes_retransmit=9 bytes_invalid=0 send_seq=169448 receive_seq=169448 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992698 heater_bed: target=80 temp=80.0 pwm=0.393 sd_pos=1600385 sysload=0.34 cputime=246.559 memavail=7288156 print_time=4401.708 buffer_time=2.462 print_stall=0 extruder: target=240 temp=239.8 pwm=0.527
Stats 799176.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8954351 bytes_read=1824786 bytes_retransmit=9 bytes_invalid=0 send_seq=169491 receive_seq=169491 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992701 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=1600817 sysload=0.34 cputime=246.624 memavail=7288156 print_time=4402.346 buffer_time=2.099 print_stall=0 extruder: target=240 temp=239.9 pwm=0.445
Stats 799177.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8955814 bytes_read=1825245 bytes_retransmit=9 bytes_invalid=0 send_seq=169524 receive_seq=169524 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992705 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=1600991 sysload=0.34 cputime=246.683 memavail=7288156 print_time=4403.363 buffer_time=2.116 print_stall=0 extruder: target=240 temp=239.7 pwm=0.566
Stats 799178.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8958615 bytes_read=1825803 bytes_retransmit=9 bytes_invalid=0 send_seq=169578 receive_seq=169578 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992708 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=1602347 sysload=0.34 cputime=246.748 memavail=7288408 print_time=4404.263 buffer_time=2.016 print_stall=0 extruder: target=240 temp=240.2 pwm=0.315
Stats 799179.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8962617 bytes_read=1826477 bytes_retransmit=9 bytes_invalid=0 send_seq=169654 receive_seq=169654 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992717 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=1603999 sysload=0.34 cputime=246.826 memavail=7288412 print_time=4405.294 buffer_time=2.046 print_stall=0 extruder: target=240 temp=239.9 pwm=0.496
Stats 799180.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=8968039 bytes_read=1827232 bytes_retransmit=9 bytes_invalid=0 send_seq=169750 receive_seq=169750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=263 freq=119992717 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=1605799 sysload=0.31 cputime=246.932 memavail=7288412 print_time=4406.595 buffer_time=2.347 print_stall=0 extruder: target=240 temp=240.0 pwm=0.467
Stats 799181.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8971865 bytes_read=1827876 bytes_retransmit=9 bytes_invalid=0 send_seq=169817 receive_seq=169817 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1386 freq=119992715 heater_bed: target=80 temp=80.0 pwm=0.446 sd_pos=1606648 sysload=0.31 cputime=247.035 memavail=7288412 print_time=4407.807 buffer_time=2.557 print_stall=0 extruder: target=240 temp=239.8 pwm=0.497
Stats 799182.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8976392 bytes_read=1828563 bytes_retransmit=9 bytes_invalid=0 send_seq=169896 receive_seq=169896 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=596 freq=119992711 heater_bed: target=80 temp=80.0 pwm=0.446 sd_pos=1607122 sysload=0.31 cputime=247.128 memavail=7288412 print_time=4408.598 buffer_time=2.346 print_stall=0 extruder: target=240 temp=239.8 pwm=0.497
Stats 799183.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8980444 bytes_read=1829191 bytes_retransmit=9 bytes_invalid=0 send_seq=169966 receive_seq=169966 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=928 freq=119992711 heater_bed: target=80 temp=80.0 pwm=0.446 sd_pos=1607939 sysload=0.31 cputime=247.224 memavail=7288412 print_time=4409.506 buffer_time=2.253 print_stall=0 extruder: target=240 temp=239.9 pwm=0.430
Stats 799184.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8984507 bytes_read=1829839 bytes_retransmit=9 bytes_invalid=0 send_seq=170037 receive_seq=170037 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=725 freq=119992708 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1608618 sysload=0.31 cputime=247.323 memavail=7288412 print_time=4410.301 buffer_time=2.047 print_stall=0 extruder: target=240 temp=239.8 pwm=0.497
Stats 799185.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8989368 bytes_read=1830546 bytes_retransmit=9 bytes_invalid=0 send_seq=170120 receive_seq=170120 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1391 freq=119992707 heater_bed: target=80 temp=79.9 pwm=0.463 sd_pos=1609295 sysload=0.28 cputime=247.433 memavail=7288412 print_time=4411.546 buffer_time=2.290 print_stall=0 extruder: target=240 temp=240.3 pwm=0.328
Stats 799186.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=8994323 bytes_read=1831254 bytes_retransmit=9 bytes_invalid=0 send_seq=170206 receive_seq=170206 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=619 freq=119992702 heater_bed: target=80 temp=79.9 pwm=0.406 sd_pos=1609817 sysload=0.28 cputime=247.523 memavail=7288412 print_time=4412.300 buffer_time=2.044 print_stall=0 extruder: target=240 temp=240.3 pwm=0.353
Stats 799187.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=8998808 bytes_read=1831953 bytes_retransmit=9 bytes_invalid=0 send_seq=170284 receive_seq=170284 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=1254 freq=119992700 heater_bed: target=80 temp=79.9 pwm=0.471 sd_pos=1610446 sysload=0.28 cputime=247.619 memavail=7288412 print_time=4413.496 buffer_time=2.239 print_stall=0 extruder: target=240 temp=240.0 pwm=0.517
Stats 799188.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9004222 bytes_read=1832715 bytes_retransmit=9 bytes_invalid=0 send_seq=170378 receive_seq=170378 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=2946 freq=119992699 heater_bed: target=80 temp=79.9 pwm=0.423 sd_pos=1611176 sysload=0.28 cputime=247.736 memavail=7288916 print_time=4415.008 buffer_time=2.750 print_stall=0 extruder: target=240 temp=239.9 pwm=0.474
Stats 799189.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9008370 bytes_read=1833353 bytes_retransmit=9 bytes_invalid=0 send_seq=170450 receive_seq=170450 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=2328 freq=119992698 heater_bed: target=80 temp=79.9 pwm=0.495 sd_pos=1611730 sysload=0.28 cputime=247.829 memavail=7288916 print_time=4415.794 buffer_time=2.535 print_stall=0 extruder: target=240 temp=239.9 pwm=0.440
Stats 799190.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9013213 bytes_read=1834080 bytes_retransmit=9 bytes_invalid=0 send_seq=170534 receive_seq=170534 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1072 freq=119992694 heater_bed: target=80 temp=79.9 pwm=0.405 sd_pos=1612720 sysload=0.26 cputime=247.933 memavail=7288916 print_time=4416.681 buffer_time=2.422 print_stall=0 extruder: target=240 temp=239.7 pwm=0.499
Stats 799191.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9016751 bytes_read=1834678 bytes_retransmit=9 bytes_invalid=0 send_seq=170598 receive_seq=170598 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992724 heater_bed: target=80 temp=79.9 pwm=0.405 sd_pos=1613096 sysload=0.26 cputime=248.011 memavail=7288916 print_time=4417.424 buffer_time=2.165 print_stall=0 extruder: target=240 temp=239.9 pwm=0.443
Stats 799192.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9019713 bytes_read=1835262 bytes_retransmit=9 bytes_invalid=0 send_seq=170656 receive_seq=170656 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992717 heater_bed: target=80 temp=79.9 pwm=0.422 sd_pos=1613799 sysload=0.26 cputime=248.090 memavail=7288916 print_time=4419.156 buffer_time=2.892 print_stall=0 extruder: target=240 temp=240.1 pwm=0.410
Stats 799193.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9020475 bytes_read=1835674 bytes_retransmit=9 bytes_invalid=0 send_seq=170677 receive_seq=170677 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119992715 heater_bed: target=80 temp=79.9 pwm=0.483 sd_pos=1614013 sysload=0.26 cputime=248.145 memavail=7288924 print_time=4419.305 buffer_time=2.040 print_stall=0 extruder: target=240 temp=239.9 pwm=0.520
Stats 799194.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9023696 bytes_read=1836262 bytes_retransmit=9 bytes_invalid=0 send_seq=170739 receive_seq=170739 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992710 heater_bed: target=80 temp=79.9 pwm=0.413 sd_pos=1614575 sysload=0.26 cputime=248.221 memavail=7288924 print_time=4420.865 buffer_time=2.598 print_stall=0 extruder: target=240 temp=240.0 pwm=0.453
Stats 799195.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9024883 bytes_read=1836695 bytes_retransmit=9 bytes_invalid=0 send_seq=170770 receive_seq=170770 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992708 heater_bed: target=80 temp=79.9 pwm=0.430 sd_pos=1614682 sysload=0.24 cputime=248.280 memavail=7288924 print_time=4421.630 buffer_time=2.359 print_stall=0 extruder: target=240 temp=239.9 pwm=0.500
Stats 799196.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9027875 bytes_read=1837247 bytes_retransmit=9 bytes_invalid=0 send_seq=170828 receive_seq=170816 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992705 heater_bed: target=80 temp=79.9 pwm=0.430 sd_pos=1615376 sysload=0.24 cputime=248.347 memavail=7288924 print_time=4422.868 buffer_time=2.592 print_stall=0 extruder: target=240 temp=239.8 pwm=0.532
Stats 799197.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9029869 bytes_read=1837790 bytes_retransmit=9 bytes_invalid=0 send_seq=170869 receive_seq=170869 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992713 heater_bed: target=80 temp=79.9 pwm=0.430 sd_pos=1615691 sysload=0.24 cputime=248.403 memavail=7288924 print_time=4423.630 buffer_time=2.353 print_stall=0 extruder: target=240 temp=239.9 pwm=0.471
Stats 799198.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9030724 bytes_read=1838193 bytes_retransmit=9 bytes_invalid=0 send_seq=170891 receive_seq=170891 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992716 heater_bed: target=80 temp=79.9 pwm=0.430 sd_pos=1615748 sysload=0.24 cputime=248.454 memavail=7288672 print_time=4424.539 buffer_time=2.260 print_stall=0 extruder: target=240 temp=239.9 pwm=0.455
Stats 799199.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9032893 bytes_read=1838710 bytes_retransmit=9 bytes_invalid=0 send_seq=170936 receive_seq=170936 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992716 heater_bed: target=80 temp=79.9 pwm=0.477 sd_pos=1616065 sysload=0.24 cputime=248.513 memavail=7288448 print_time=4425.354 buffer_time=2.076 print_stall=0 extruder: target=240 temp=240.1 pwm=0.432
Stats 799200.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9036122 bytes_read=1839298 bytes_retransmit=9 bytes_invalid=0 send_seq=170998 receive_seq=170998 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=79.9 pwm=0.374 sd_pos=1616459 sysload=0.30 cputime=248.578 memavail=7288448 print_time=4426.310 buffer_time=2.031 print_stall=0 extruder: target=240 temp=240.2 pwm=0.432
Stats 799201.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9041983 bytes_read=1840147 bytes_retransmit=9 bytes_invalid=0 send_seq=171106 receive_seq=171106 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1361 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.352 sd_pos=1617563 sysload=0.30 cputime=248.677 memavail=7288448 print_time=4427.943 buffer_time=2.663 print_stall=0 extruder: target=240 temp=240.0 pwm=0.508
Stats 799202.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9045325 bytes_read=1840744 bytes_retransmit=9 bytes_invalid=0 send_seq=171167 receive_seq=171167 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=897 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=1618112 sysload=0.30 cputime=248.766 memavail=7288448 print_time=4428.570 buffer_time=2.289 print_stall=0 extruder: target=240 temp=239.8 pwm=0.538
Stats 799203.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9050030 bytes_read=1841422 bytes_retransmit=9 bytes_invalid=0 send_seq=171247 receive_seq=171247 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=2422 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.400 sd_pos=1619485 sysload=0.30 cputime=248.881 memavail=7288448 print_time=4429.970 buffer_time=2.688 print_stall=0 extruder: target=240 temp=239.9 pwm=0.477
Stats 799204.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9054556 bytes_read=1842110 bytes_retransmit=9 bytes_invalid=0 send_seq=171326 receive_seq=171326 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=1651 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=1620170 sysload=0.30 cputime=248.980 memavail=7288744 print_time=4430.639 buffer_time=2.356 print_stall=0 extruder: target=240 temp=239.9 pwm=0.517
Stats 799205.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9058645 bytes_read=1842757 bytes_retransmit=9 bytes_invalid=0 send_seq=171397 receive_seq=171397 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=900 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.353 sd_pos=1620812 sysload=0.28 cputime=249.068 memavail=7288932 print_time=4431.344 buffer_time=2.061 print_stall=0 extruder: target=240 temp=239.8 pwm=0.558
Stats 799206.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9063845 bytes_read=1843501 bytes_retransmit=9 bytes_invalid=0 send_seq=171487 receive_seq=171487 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=1773 freq=119992716 heater_bed: target=80 temp=80.0 pwm=0.353 sd_pos=1621952 sysload=0.28 cputime=249.141 memavail=7288932 print_time=4432.751 buffer_time=2.466 print_stall=0 extruder: target=240 temp=240.1 pwm=0.412
Stats 799207.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9068682 bytes_read=1844214 bytes_retransmit=9 bytes_invalid=0 send_seq=171571 receive_seq=171571 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=742 freq=119992708 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=1622449 sysload=0.28 cputime=249.208 memavail=7288932 print_time=4433.400 buffer_time=2.115 print_stall=0 extruder: target=240 temp=240.1 pwm=0.406
Stats 799208.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9072997 bytes_read=1844881 bytes_retransmit=9 bytes_invalid=0 send_seq=171646 receive_seq=171646 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119992706 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=1623223 sysload=0.28 cputime=249.273 memavail=7288688 print_time=4434.410 buffer_time=2.125 print_stall=0 extruder: target=240 temp=240.1 pwm=0.435
Stats 799209.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9076044 bytes_read=1845449 bytes_retransmit=9 bytes_invalid=0 send_seq=171704 receive_seq=171704 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992711 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=1624325 sysload=0.28 cputime=249.335 memavail=7288688 print_time=4435.639 buffer_time=2.352 print_stall=0 extruder: target=240 temp=240.0 pwm=0.435
Stats 799210.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9079080 bytes_read=1846037 bytes_retransmit=9 bytes_invalid=0 send_seq=171763 receive_seq=171763 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992707 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=1624980 sysload=0.25 cputime=249.409 memavail=7288688 print_time=4436.360 buffer_time=2.072 print_stall=0 extruder: target=240 temp=240.1 pwm=0.452
Stats 799211.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9081752 bytes_read=1846594 bytes_retransmit=9 bytes_invalid=0 send_seq=171816 receive_seq=171816 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=30 freq=119992704 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=1625841 sysload=0.25 cputime=249.486 memavail=7288688 print_time=4437.481 buffer_time=2.194 print_stall=0 extruder: target=240 temp=239.9 pwm=0.508
Stats 799212.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=9084046 bytes_read=1847123 bytes_retransmit=9 bytes_invalid=0 send_seq=171863 receive_seq=171863 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=70 freq=119992703 heater_bed: target=80 temp=79.9 pwm=0.541 sd_pos=1626523 sysload=0.25 cputime=249.562 memavail=7288688 print_time=4438.693 buffer_time=2.405 print_stall=0 extruder: target=240 temp=240.1 pwm=0.380
Stats 799213.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=9086219 bytes_read=1847651 bytes_retransmit=9 bytes_invalid=0 send_seq=171910 receive_seq=171910 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=110 freq=119992704 heater_bed: target=80 temp=79.9 pwm=0.419 sd_pos=1627596 sysload=0.25 cputime=249.636 memavail=7288688 print_time=4439.394 buffer_time=2.105 print_stall=0 extruder: target=240 temp=240.4 pwm=0.301
Stats 799214.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=9091486 bytes_read=1848410 bytes_retransmit=9 bytes_invalid=0 send_seq=172005 receive_seq=172005 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=150 freq=119992706 heater_bed: target=80 temp=79.9 pwm=0.419 sd_pos=1628738 sysload=0.25 cputime=249.710 memavail=7288688 print_time=4440.615 buffer_time=2.325 print_stall=0 extruder: target=240 temp=239.9 pwm=0.527
Stats 799215.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=9095308 bytes_read=1849041 bytes_retransmit=9 bytes_invalid=0 send_seq=172077 receive_seq=172077 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1655 freq=119992707 heater_bed: target=80 temp=80.0 pwm=0.342 sd_pos=1629141 sysload=0.23 cputime=249.785 memavail=7288464 print_time=4441.766 buffer_time=2.476 print_stall=0 extruder: target=240 temp=240.1 pwm=0.396
Stats 799216.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=9099500 bytes_read=1849701 bytes_retransmit=9 bytes_invalid=0 send_seq=172151 receive_seq=172151 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=738 freq=119992710 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=1629620 sysload=0.23 cputime=249.887 memavail=7288464 print_time=4442.563 buffer_time=2.272 print_stall=0 extruder: target=240 temp=239.8 pwm=0.503
Stats 799217.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9104468 bytes_read=1850429 bytes_retransmit=9 bytes_invalid=0 send_seq=172235 receive_seq=172235 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2699 freq=119992709 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=1630798 sysload=0.23 cputime=249.999 memavail=7288244 print_time=4444.050 buffer_time=2.758 print_stall=0 extruder: target=240 temp=240.1 pwm=0.348
Stats 799218.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9108681 bytes_read=1851077 bytes_retransmit=9 bytes_invalid=0 send_seq=172309 receive_seq=172309 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1263 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=1630968 sysload=0.23 cputime=250.094 memavail=7288524 print_time=4444.572 buffer_time=2.280 print_stall=0 extruder: target=240 temp=240.0 pwm=0.391
Stats 799219.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9113403 bytes_read=1851775 bytes_retransmit=9 bytes_invalid=0 send_seq=172390 receive_seq=172390 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=3032 freq=119992730 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1631932 sysload=0.23 cputime=250.203 memavail=7291496 print_time=4446.040 buffer_time=2.747 print_stall=0 extruder: target=240 temp=240.1 pwm=0.368
Stats 799220.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9118058 bytes_read=1852467 bytes_retransmit=9 bytes_invalid=0 send_seq=172470 receive_seq=172470 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=1910 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1632333 sysload=0.38 cputime=250.299 memavail=7291392 print_time=4446.736 buffer_time=2.442 print_stall=0 extruder: target=240 temp=240.1 pwm=0.375
Stats 799221.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9122634 bytes_read=1853145 bytes_retransmit=9 bytes_invalid=0 send_seq=172550 receive_seq=172550 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=1602 freq=119992728 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1633178 sysload=0.38 cputime=250.395 memavail=7291392 print_time=4447.630 buffer_time=2.336 print_stall=0 extruder: target=240 temp=239.9 pwm=0.468
Stats 799222.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9126867 bytes_read=1853829 bytes_retransmit=9 bytes_invalid=0 send_seq=172625 receive_seq=172625 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=30 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=1633643 sysload=0.38 cputime=250.492 memavail=7291140 print_time=4448.910 buffer_time=2.615 print_stall=0 extruder: target=240 temp=240.0 pwm=0.410
Stats 799223.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9128226 bytes_read=1854281 bytes_retransmit=9 bytes_invalid=0 send_seq=172657 receive_seq=172657 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=50 freq=119992725 heater_bed: target=80 temp=79.9 pwm=0.507 sd_pos=1634001 sysload=0.38 cputime=250.559 memavail=7291140 print_time=4449.519 buffer_time=2.223 print_stall=0 extruder: target=240 temp=240.0 pwm=0.407
Stats 799224.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9129420 bytes_read=1854694 bytes_retransmit=9 bytes_invalid=0 send_seq=172684 receive_seq=172684 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=50 freq=119992723 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=1634144 sysload=0.38 cputime=250.626 memavail=7291140 print_time=4450.475 buffer_time=2.178 print_stall=0 extruder: target=240 temp=239.9 pwm=0.482
Stats 799225.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9131504 bytes_read=1855227 bytes_retransmit=9 bytes_invalid=0 send_seq=172732 receive_seq=172732 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=10 freq=119992723 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=1634497 sysload=0.43 cputime=250.703 memavail=7291140 print_time=4451.401 buffer_time=2.103 print_stall=0 extruder: target=240 temp=240.1 pwm=0.359
Stats 799226.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9134605 bytes_read=1855824 bytes_retransmit=9 bytes_invalid=0 send_seq=172793 receive_seq=172793 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=20 freq=119992729 heater_bed: target=80 temp=80.0 pwm=0.385 sd_pos=1634870 sysload=0.43 cputime=250.776 memavail=7291140 print_time=4452.742 buffer_time=2.444 print_stall=0 extruder: target=240 temp=239.9 pwm=0.447
Stats 799227.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9139934 bytes_read=1856608 bytes_retransmit=9 bytes_invalid=0 send_seq=172891 receive_seq=172891 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=10 freq=119992752 heater_bed: target=80 temp=79.9 pwm=0.487 sd_pos=1635861 sysload=0.43 cputime=250.868 memavail=7291140 print_time=4454.134 buffer_time=2.836 print_stall=0 extruder: target=240 temp=240.1 pwm=0.362
Stats 799228.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9143056 bytes_read=1857211 bytes_retransmit=9 bytes_invalid=0 send_seq=172953 receive_seq=172953 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=235 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.380 sd_pos=1636894 sysload=0.43 cputime=250.951 memavail=7290892 print_time=4454.740 buffer_time=2.441 print_stall=0 extruder: target=240 temp=239.9 pwm=0.487
Stats 799229.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9145700 bytes_read=1857753 bytes_retransmit=9 bytes_invalid=0 send_seq=173003 receive_seq=173003 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=380 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=1637119 sysload=0.43 cputime=251.031 memavail=7290892 print_time=4455.320 buffer_time=2.019 print_stall=0 extruder: target=240 temp=240.0 pwm=0.394
Stats 799230.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9150437 bytes_read=1858441 bytes_retransmit=9 bytes_invalid=0 send_seq=173085 receive_seq=173085 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=3106 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.332 sd_pos=1638489 sysload=0.47 cputime=251.143 memavail=7290892 print_time=4456.963 buffer_time=2.662 print_stall=0 extruder: target=240 temp=240.1 pwm=0.394
Stats 799231.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9155409 bytes_read=1859159 bytes_retransmit=9 bytes_invalid=0 send_seq=173170 receive_seq=173170 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2569 freq=119992741 heater_bed: target=80 temp=80.0 pwm=0.346 sd_pos=1639490 sysload=0.47 cputime=251.255 memavail=7290892 print_time=4457.873 buffer_time=2.571 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 799232.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9160248 bytes_read=1859887 bytes_retransmit=9 bytes_invalid=0 send_seq=173254 receive_seq=173254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=861 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.392 sd_pos=1639684 sysload=0.47 cputime=251.356 memavail=7290892 print_time=4458.494 buffer_time=2.191 print_stall=0 extruder: target=240 temp=239.9 pwm=0.465
Stats 799233.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9164478 bytes_read=1860525 bytes_retransmit=9 bytes_invalid=0 send_seq=173327 receive_seq=173326 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=3984 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=1641234 sysload=0.47 cputime=251.474 memavail=7290640 print_time=4459.982 buffer_time=2.678 print_stall=0 extruder: target=240 temp=240.0 pwm=0.465
Stats 799234.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9169588 bytes_read=1861258 bytes_retransmit=9 bytes_invalid=0 send_seq=173414 receive_seq=173414 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=576 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=1641379 sysload=0.47 cputime=251.562 memavail=7290628 print_time=4460.430 buffer_time=2.126 print_stall=0 extruder: target=240 temp=239.8 pwm=0.465
Stats 799235.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9173415 bytes_read=1861895 bytes_retransmit=9 bytes_invalid=0 send_seq=173483 receive_seq=173483 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=1641754 sysload=0.43 cputime=251.618 memavail=7290628 print_time=4461.722 buffer_time=2.418 print_stall=0 extruder: target=240 temp=240.2 pwm=0.391
Stats 799236.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9176521 bytes_read=1862463 bytes_retransmit=9 bytes_invalid=0 send_seq=173541 receive_seq=173541 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=10 freq=119992730 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=1642103 sysload=0.43 cputime=251.669 memavail=7290628 print_time=4462.726 buffer_time=2.421 print_stall=0 extruder: target=240 temp=240.3 pwm=0.391
Stats 799237.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9178660 bytes_read=1862997 bytes_retransmit=9 bytes_invalid=0 send_seq=173586 receive_seq=173586 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=10 freq=119992728 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1642330 sysload=0.43 cputime=251.702 memavail=7290628 print_time=4463.681 buffer_time=2.375 print_stall=0 extruder: target=240 temp=240.3 pwm=0.434
Stats 799238.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9181081 bytes_read=1863534 bytes_retransmit=9 bytes_invalid=0 send_seq=173635 receive_seq=173635 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992718 heater_bed: target=80 temp=79.9 pwm=0.464 sd_pos=1642713 sysload=0.43 cputime=251.758 memavail=7290124 print_time=4464.559 buffer_time=2.253 print_stall=0 extruder: target=240 temp=240.2 pwm=0.438
Stats 799239.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9183690 bytes_read=1864078 bytes_retransmit=9 bytes_invalid=0 send_seq=173686 receive_seq=173686 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=1643142 sysload=0.43 cputime=251.804 memavail=7290124 print_time=4465.729 buffer_time=2.422 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 799240.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9186533 bytes_read=1864646 bytes_retransmit=9 bytes_invalid=0 send_seq=173741 receive_seq=173741 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=1643882 sysload=0.48 cputime=251.869 memavail=7290124 print_time=4467.061 buffer_time=2.754 print_stall=0 extruder: target=240 temp=240.0 pwm=0.451
Stats 799241.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9187322 bytes_read=1865053 bytes_retransmit=9 bytes_invalid=0 send_seq=173764 receive_seq=173764 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992732 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=1643992 sysload=0.48 cputime=251.924 memavail=7290124 print_time=4467.356 buffer_time=2.048 print_stall=0 extruder: target=240 temp=239.9 pwm=0.434
Stats 799242.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9190130 bytes_read=1865617 bytes_retransmit=9 bytes_invalid=0 send_seq=173818 receive_seq=173818 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=1644495 sysload=0.48 cputime=251.993 memavail=7290124 print_time=4468.683 buffer_time=2.374 print_stall=0 extruder: target=240 temp=239.8 pwm=0.509
Stats 799243.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9191342 bytes_read=1866060 bytes_retransmit=9 bytes_invalid=0 send_seq=173848 receive_seq=173848 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=80.0 pwm=0.353 sd_pos=1644602 sysload=0.48 cputime=252.045 memavail=7290124 print_time=4469.425 buffer_time=2.116 print_stall=0 extruder: target=240 temp=239.8 pwm=0.463
Stats 799244.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9194191 bytes_read=1866632 bytes_retransmit=9 bytes_invalid=0 send_seq=173904 receive_seq=173904 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=80.0 pwm=0.353 sd_pos=1645203 sysload=0.48 cputime=252.115 memavail=7290124 print_time=4470.673 buffer_time=2.363 print_stall=0 extruder: target=240 temp=240.3 pwm=0.281
Stats 799245.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9196245 bytes_read=1867120 bytes_retransmit=9 bytes_invalid=0 send_seq=173946 receive_seq=173946 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992723 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=1645483 sysload=0.52 cputime=252.169 memavail=7290124 print_time=4471.449 buffer_time=2.138 print_stall=0 extruder: target=240 temp=240.1 pwm=0.416
Stats 799246.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9197082 bytes_read=1867538 bytes_retransmit=9 bytes_invalid=0 send_seq=173971 receive_seq=173971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992722 heater_bed: target=80 temp=80.0 pwm=0.334 sd_pos=1645540 sysload=0.52 cputime=252.231 memavail=7290124 print_time=4472.358 buffer_time=2.046 print_stall=0 extruder: target=240 temp=240.1 pwm=0.388
Stats 799247.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9200338 bytes_read=1868160 bytes_retransmit=9 bytes_invalid=0 send_seq=174034 receive_seq=174034 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992718 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=1645979 sysload=0.52 cputime=252.305 memavail=7290124 print_time=4473.534 buffer_time=2.221 print_stall=0 extruder: target=240 temp=240.0 pwm=0.462
Stats 799248.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9203526 bytes_read=1868748 bytes_retransmit=9 bytes_invalid=0 send_seq=174096 receive_seq=174096 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992732 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1646289 sysload=0.52 cputime=252.368 memavail=7289652 print_time=4474.404 buffer_time=2.092 print_stall=0 extruder: target=240 temp=240.1 pwm=0.415
Stats 799249.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9209078 bytes_read=1869535 bytes_retransmit=9 bytes_invalid=0 send_seq=174195 receive_seq=174195 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=849 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=1647498 sysload=0.52 cputime=252.448 memavail=7289652 print_time=4475.786 buffer_time=2.473 print_stall=0 extruder: target=240 temp=240.1 pwm=0.401
Stats 799250.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9212561 bytes_read=1870134 bytes_retransmit=9 bytes_invalid=0 send_seq=174258 receive_seq=174258 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=626 freq=119992724 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=1648013 sysload=0.72 cputime=252.527 memavail=7289652 print_time=4476.564 buffer_time=2.250 print_stall=0 extruder: target=240 temp=239.9 pwm=0.494
Stats 799251.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9217505 bytes_read=1870835 bytes_retransmit=9 bytes_invalid=0 send_seq=174344 receive_seq=174344 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=2295 freq=119992725 heater_bed: target=80 temp=80.1 pwm=0.336 sd_pos=1649194 sysload=0.72 cputime=252.637 memavail=7289656 print_time=4477.882 buffer_time=2.568 print_stall=0 extruder: target=240 temp=240.2 pwm=0.314
Stats 799252.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9221536 bytes_read=1871499 bytes_retransmit=9 bytes_invalid=0 send_seq=174415 receive_seq=174415 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1405 freq=119992720 heater_bed: target=80 temp=80.1 pwm=0.320 sd_pos=1649628 sysload=0.72 cputime=252.732 memavail=7289656 print_time=4478.621 buffer_time=2.306 print_stall=0 extruder: target=240 temp=240.2 pwm=0.376
Stats 799253.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9226921 bytes_read=1872251 bytes_retransmit=9 bytes_invalid=0 send_seq=174507 receive_seq=174507 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=465 freq=119992719 heater_bed: target=80 temp=80.0 pwm=0.449 sd_pos=1650231 sysload=0.72 cputime=252.834 memavail=7289656 print_time=4479.438 buffer_time=2.122 print_stall=0 extruder: target=240 temp=240.3 pwm=0.316
Stats 799254.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9230660 bytes_read=1872854 bytes_retransmit=9 bytes_invalid=0 send_seq=174572 receive_seq=174572 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992723 heater_bed: target=80 temp=80.1 pwm=0.376 sd_pos=1651084 sysload=0.72 cputime=252.919 memavail=7289656 print_time=4480.660 buffer_time=2.343 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 799255.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9232322 bytes_read=1873332 bytes_retransmit=9 bytes_invalid=0 send_seq=174609 receive_seq=174609 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992719 heater_bed: target=80 temp=80.1 pwm=0.352 sd_pos=1651224 sysload=0.82 cputime=252.976 memavail=7289656 print_time=4481.572 buffer_time=2.254 print_stall=0 extruder: target=240 temp=240.1 pwm=0.405
Stats 799256.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9233515 bytes_read=1873764 bytes_retransmit=9 bytes_invalid=0 send_seq=174637 receive_seq=174637 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992710 heater_bed: target=80 temp=80.1 pwm=0.473 sd_pos=1651337 sysload=0.82 cputime=253.034 memavail=7290756 print_time=4482.538 buffer_time=2.220 print_stall=0 extruder: target=240 temp=239.8 pwm=0.558
Stats 799257.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9237707 bytes_read=1874448 bytes_retransmit=9 bytes_invalid=0 send_seq=174715 receive_seq=174715 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992729 heater_bed: target=80 temp=80.1 pwm=0.418 sd_pos=1652227 sysload=0.82 cputime=253.102 memavail=7290660 print_time=4484.162 buffer_time=2.844 print_stall=0 extruder: target=240 temp=239.9 pwm=0.498
Stats 799258.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9240125 bytes_read=1874991 bytes_retransmit=9 bytes_invalid=0 send_seq=174765 receive_seq=174765 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992722 heater_bed: target=80 temp=80.1 pwm=0.359 sd_pos=1652370 sysload=0.82 cputime=253.164 memavail=7290808 print_time=4484.656 buffer_time=2.337 print_stall=0 extruder: target=240 temp=240.2 pwm=0.361
Stats 799259.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9243791 bytes_read=1875628 bytes_retransmit=9 bytes_invalid=0 send_seq=174834 receive_seq=174834 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=17 upcoming_bytes=220 freq=119992717 heater_bed: target=80 temp=80.1 pwm=0.434 sd_pos=1652889 sysload=0.82 cputime=253.216 memavail=7290916 print_time=4485.626 buffer_time=2.307 print_stall=0 extruder: target=240 temp=240.3 pwm=0.361
Stats 799260.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9247776 bytes_read=1876256 bytes_retransmit=9 bytes_invalid=0 send_seq=174904 receive_seq=174904 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992711 heater_bed: target=80 temp=80.1 pwm=0.339 sd_pos=1653119 sysload=0.76 cputime=253.285 memavail=7290916 print_time=4486.581 buffer_time=2.261 print_stall=0 extruder: target=240 temp=240.0 pwm=0.438
Stats 799261.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9251782 bytes_read=1876929 bytes_retransmit=9 bytes_invalid=0 send_seq=174980 receive_seq=174980 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992710 heater_bed: target=80 temp=80.1 pwm=0.354 sd_pos=1653351 sysload=0.76 cputime=253.361 memavail=7290916 print_time=4487.537 buffer_time=2.216 print_stall=0 extruder: target=240 temp=239.7 pwm=0.539
Stats 799262.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9255706 bytes_read=1877607 bytes_retransmit=9 bytes_invalid=0 send_seq=175054 receive_seq=175054 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992708 heater_bed: target=80 temp=80.1 pwm=0.443 sd_pos=1653581 sysload=0.76 cputime=253.442 memavail=7290916 print_time=4488.492 buffer_time=2.170 print_stall=0 extruder: target=240 temp=239.7 pwm=0.464
Stats 799263.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9260204 bytes_read=1878285 bytes_retransmit=9 bytes_invalid=0 send_seq=175134 receive_seq=175134 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2069 freq=119992706 heater_bed: target=80 temp=80.1 pwm=0.353 sd_pos=1654317 sysload=0.76 cputime=253.536 memavail=7290916 print_time=4489.956 buffer_time=2.633 print_stall=0 extruder: target=240 temp=240.1 pwm=0.356
Stats 799264.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9264429 bytes_read=1878958 bytes_retransmit=9 bytes_invalid=0 send_seq=175210 receive_seq=175210 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=991 freq=119992702 heater_bed: target=80 temp=80.1 pwm=0.405 sd_pos=1654767 sysload=0.76 cputime=253.652 memavail=7290660 print_time=4490.674 buffer_time=2.350 print_stall=0 extruder: target=240 temp=239.9 pwm=0.401
Stats 799265.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9266586 bytes_read=1879465 bytes_retransmit=9 bytes_invalid=0 send_seq=175253 receive_seq=175253 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992694 heater_bed: target=80 temp=80.1 pwm=0.419 sd_pos=1654942 sysload=0.70 cputime=253.720 memavail=7290660 print_time=4491.389 buffer_time=2.065 print_stall=0 extruder: target=240 temp=239.9 pwm=0.420
Stats 799266.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9269401 bytes_read=1880023 bytes_retransmit=9 bytes_invalid=0 send_seq=175309 receive_seq=175309 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992703 heater_bed: target=80 temp=80.1 pwm=0.402 sd_pos=1655693 sysload=0.70 cputime=253.794 memavail=7290660 print_time=4492.725 buffer_time=2.401 print_stall=0 extruder: target=240 temp=239.5 pwm=0.602
Stats 799267.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9271010 bytes_read=1880512 bytes_retransmit=9 bytes_invalid=0 send_seq=175345 receive_seq=175345 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992698 heater_bed: target=80 temp=80.1 pwm=0.366 sd_pos=1655987 sysload=0.70 cputime=253.866 memavail=7290660 print_time=4493.773 buffer_time=2.448 print_stall=0 extruder: target=240 temp=239.7 pwm=0.479
Stats 799268.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9273972 bytes_read=1881104 bytes_retransmit=9 bytes_invalid=0 send_seq=175405 receive_seq=175405 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992694 heater_bed: target=80 temp=80.1 pwm=0.405 sd_pos=1656363 sysload=0.70 cputime=253.917 memavail=7290412 print_time=4495.045 buffer_time=2.719 print_stall=0 extruder: target=240 temp=239.9 pwm=0.368
Stats 799269.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9275165 bytes_read=1881537 bytes_retransmit=9 bytes_invalid=0 send_seq=175436 receive_seq=175436 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992687 heater_bed: target=80 temp=80.1 pwm=0.343 sd_pos=1656687 sysload=0.70 cputime=253.978 memavail=7290412 print_time=4495.491 buffer_time=2.164 print_stall=0 extruder: target=240 temp=239.9 pwm=0.391
Stats 799270.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9277708 bytes_read=1882095 bytes_retransmit=9 bytes_invalid=0 send_seq=175489 receive_seq=175489 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992688 heater_bed: target=80 temp=80.0 pwm=0.482 sd_pos=1657018 sysload=0.64 cputime=254.042 memavail=7290412 print_time=4496.614 buffer_time=2.286 print_stall=0 extruder: target=240 temp=239.7 pwm=0.548
Stats 799271.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9279482 bytes_read=1882577 bytes_retransmit=9 bytes_invalid=0 send_seq=175527 receive_seq=175527 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119992692 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=1657187 sysload=0.64 cputime=254.113 memavail=7290412 print_time=4497.990 buffer_time=2.661 print_stall=0 extruder: target=240 temp=240.1 pwm=0.358
Stats 799272.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9280704 bytes_read=1883020 bytes_retransmit=9 bytes_invalid=0 send_seq=175557 receive_seq=175557 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992693 heater_bed: target=80 temp=80.0 pwm=0.396 sd_pos=1657298 sysload=0.64 cputime=254.167 memavail=7290412 print_time=4498.451 buffer_time=2.121 print_stall=0 extruder: target=240 temp=239.9 pwm=0.477
Stats 799273.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9283560 bytes_read=1883598 bytes_retransmit=9 bytes_invalid=0 send_seq=175614 receive_seq=175614 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992696 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=1657651 sysload=0.64 cputime=254.232 memavail=7290412 print_time=4499.331 buffer_time=2.001 print_stall=0 extruder: target=240 temp=240.0 pwm=0.423
Stats 799274.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9289830 bytes_read=1884445 bytes_retransmit=9 bytes_invalid=0 send_seq=175725 receive_seq=175725 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=62 freq=119992697 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1658554 sysload=0.64 cputime=254.313 memavail=7290412 print_time=4500.858 buffer_time=2.528 print_stall=0 extruder: target=240 temp=240.1 pwm=0.406
Stats 799275.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9292553 bytes_read=1884978 bytes_retransmit=9 bytes_invalid=0 send_seq=175776 receive_seq=175776 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1658895 sysload=0.59 cputime=254.387 memavail=7290412 print_time=4501.489 buffer_time=2.158 print_stall=0 extruder: target=240 temp=240.3 pwm=0.301
Stats 799276.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9296759 bytes_read=1885667 bytes_retransmit=9 bytes_invalid=0 send_seq=175852 receive_seq=175852 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=2793 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=1660229 sysload=0.59 cputime=254.482 memavail=7290412 print_time=4502.993 buffer_time=2.653 print_stall=0 extruder: target=240 temp=240.1 pwm=0.385
Stats 799277.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9301404 bytes_read=1886359 bytes_retransmit=9 bytes_invalid=0 send_seq=175932 receive_seq=175932 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1423 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=1660632 sysload=0.59 cputime=254.573 memavail=7290412 print_time=4503.759 buffer_time=2.418 print_stall=0 extruder: target=240 temp=240.1 pwm=0.391
Stats 799278.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9306074 bytes_read=1887037 bytes_retransmit=9 bytes_invalid=0 send_seq=176012 receive_seq=176012 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=541 freq=119992736 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=1661227 sysload=0.59 cputime=254.684 memavail=7290692 print_time=4504.473 buffer_time=2.130 print_stall=0 extruder: target=240 temp=239.9 pwm=0.489
Stats 799279.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9310612 bytes_read=1887725 bytes_retransmit=9 bytes_invalid=0 send_seq=176091 receive_seq=176091 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1138 freq=119992731 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1662233 sysload=0.59 cputime=254.804 memavail=7290692 print_time=4505.913 buffer_time=2.569 print_stall=0 extruder: target=240 temp=240.2 pwm=0.366
Stats 799280.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9313678 bytes_read=1888307 bytes_retransmit=9 bytes_invalid=0 send_seq=176149 receive_seq=176149 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992729 heater_bed: target=80 temp=80.0 pwm=0.355 sd_pos=1662289 sysload=0.54 cputime=254.882 memavail=7290692 print_time=4506.791 buffer_time=2.446 print_stall=0 extruder: target=240 temp=240.1 pwm=0.402
Stats 799281.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9315012 bytes_read=1888761 bytes_retransmit=9 bytes_invalid=0 send_seq=176181 receive_seq=176181 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=1662458 sysload=0.54 cputime=254.949 memavail=7290692 print_time=4507.975 buffer_time=2.630 print_stall=0 extruder: target=240 temp=239.9 pwm=0.455
Stats 799282.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9315975 bytes_read=1889179 bytes_retransmit=9 bytes_invalid=0 send_seq=176206 receive_seq=176206 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=1662487 sysload=0.54 cputime=255.005 memavail=7290692 print_time=4508.452 buffer_time=2.106 print_stall=0 extruder: target=240 temp=239.9 pwm=0.467
Stats 799283.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9318569 bytes_read=1889721 bytes_retransmit=9 bytes_invalid=0 send_seq=176256 receive_seq=176256 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1662772 sysload=0.54 cputime=255.075 memavail=7290692 print_time=4509.787 buffer_time=2.441 print_stall=0 extruder: target=240 temp=240.3 pwm=0.367
Stats 799284.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9322545 bytes_read=1890369 bytes_retransmit=9 bytes_invalid=0 send_seq=176330 receive_seq=176330 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992729 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=1663054 sysload=0.54 cputime=255.140 memavail=7290692 print_time=4510.674 buffer_time=2.326 print_stall=0 extruder: target=240 temp=240.3 pwm=0.338
Stats 799285.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9325778 bytes_read=1890974 bytes_retransmit=9 bytes_invalid=0 send_seq=176393 receive_seq=176393 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.383 sd_pos=1663283 sysload=0.50 cputime=255.211 memavail=7290692 print_time=4511.774 buffer_time=2.426 print_stall=0 extruder: target=240 temp=240.2 pwm=0.425
Stats 799286.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9328883 bytes_read=1891563 bytes_retransmit=9 bytes_invalid=0 send_seq=176454 receive_seq=176454 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992728 heater_bed: target=80 temp=80.0 pwm=0.383 sd_pos=1663514 sysload=0.50 cputime=255.270 memavail=7290692 print_time=4512.892 buffer_time=2.543 print_stall=0 extruder: target=240 temp=240.0 pwm=0.436
Stats 799287.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9330581 bytes_read=1892026 bytes_retransmit=9 bytes_invalid=0 send_seq=176489 receive_seq=176489 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992729 heater_bed: target=80 temp=80.0 pwm=0.383 sd_pos=1663628 sysload=0.50 cputime=255.321 memavail=7290692 print_time=4513.451 buffer_time=2.102 print_stall=0 extruder: target=240 temp=240.0 pwm=0.417
Stats 799288.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9333734 bytes_read=1892629 bytes_retransmit=9 bytes_invalid=0 send_seq=176551 receive_seq=176551 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=1663859 sysload=0.50 cputime=255.393 memavail=7290696 print_time=4514.568 buffer_time=2.218 print_stall=0 extruder: target=240 temp=240.0 pwm=0.420
Stats 799289.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9336813 bytes_read=1893236 bytes_retransmit=9 bytes_invalid=0 send_seq=176614 receive_seq=176614 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=1664118 sysload=0.50 cputime=255.455 memavail=7290700 print_time=4515.660 buffer_time=2.308 print_stall=0 extruder: target=240 temp=239.9 pwm=0.473
Stats 799290.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9341139 bytes_read=1893909 bytes_retransmit=9 bytes_invalid=0 send_seq=176693 receive_seq=176693 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=1664463 sysload=0.46 cputime=255.517 memavail=7290700 print_time=4516.705 buffer_time=2.353 print_stall=0 extruder: target=240 temp=239.8 pwm=0.500
Stats 799291.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9343245 bytes_read=1894422 bytes_retransmit=9 bytes_invalid=0 send_seq=176737 receive_seq=176737 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=1664782 sysload=0.46 cputime=255.573 memavail=7290700 print_time=4517.464 buffer_time=2.110 print_stall=0 extruder: target=240 temp=240.0 pwm=0.433
Stats 799292.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9346276 bytes_read=1895020 bytes_retransmit=9 bytes_invalid=0 send_seq=176795 receive_seq=176795 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.346 sd_pos=1665602 sysload=0.46 cputime=255.648 memavail=7290700 print_time=4519.199 buffer_time=2.845 print_stall=0 extruder: target=240 temp=240.2 pwm=0.360
Stats 799293.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9346944 bytes_read=1895403 bytes_retransmit=9 bytes_invalid=0 send_seq=176816 receive_seq=176816 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=1665685 sysload=0.46 cputime=255.702 memavail=7290700 print_time=4519.479 buffer_time=2.125 print_stall=0 extruder: target=240 temp=239.8 pwm=0.477
Stats 799294.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9349767 bytes_read=1895976 bytes_retransmit=9 bytes_invalid=0 send_seq=176872 receive_seq=176872 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=1666161 sysload=0.46 cputime=255.777 memavail=7291456 print_time=4520.780 buffer_time=2.426 print_stall=0 extruder: target=240 temp=239.9 pwm=0.455
Stats 799295.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9350962 bytes_read=1896418 bytes_retransmit=9 bytes_invalid=0 send_seq=176902 receive_seq=176902 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=1666269 sysload=0.50 cputime=255.825 memavail=7291456 print_time=4521.501 buffer_time=2.146 print_stall=0 extruder: target=240 temp=240.1 pwm=0.414
Stats 799296.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9353636 bytes_read=1896961 bytes_retransmit=9 bytes_invalid=0 send_seq=176955 receive_seq=176955 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=1666787 sysload=0.50 cputime=255.883 memavail=7291456 print_time=4522.765 buffer_time=2.410 print_stall=0 extruder: target=240 temp=240.1 pwm=0.415
Stats 799297.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9355580 bytes_read=1897474 bytes_retransmit=9 bytes_invalid=0 send_seq=176996 receive_seq=176996 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=1667037 sysload=0.50 cputime=255.945 memavail=7291456 print_time=4523.557 buffer_time=2.201 print_stall=0 extruder: target=240 temp=240.2 pwm=0.401
Stats 799298.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9356387 bytes_read=1897876 bytes_retransmit=9 bytes_invalid=0 send_seq=177018 receive_seq=177018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=1667105 sysload=0.50 cputime=256.003 memavail=7290700 print_time=4524.466 buffer_time=2.109 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 799299.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9359751 bytes_read=1898469 bytes_retransmit=9 bytes_invalid=0 send_seq=177081 receive_seq=177081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=1667567 sysload=0.50 cputime=256.063 memavail=7290708 print_time=4525.710 buffer_time=2.353 print_stall=0 extruder: target=240 temp=240.4 pwm=0.334
Stats 799300.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9362706 bytes_read=1899087 bytes_retransmit=9 bytes_invalid=0 send_seq=177141 receive_seq=177141 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=1667833 sysload=0.54 cputime=256.120 memavail=7290708 print_time=4526.532 buffer_time=2.174 print_stall=0 extruder: target=240 temp=240.2 pwm=0.429
Stats 799301.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9368085 bytes_read=1899845 bytes_retransmit=9 bytes_invalid=0 send_seq=177237 receive_seq=177237 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=645 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.361 sd_pos=1668878 sysload=0.54 cputime=256.200 memavail=7290708 print_time=4527.892 buffer_time=2.534 print_stall=0 extruder: target=240 temp=240.2 pwm=0.367
Stats 799302.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9371426 bytes_read=1900439 bytes_retransmit=9 bytes_invalid=0 send_seq=177297 receive_seq=177297 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=555 freq=119992741 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=1669448 sysload=0.54 cputime=256.275 memavail=7290708 print_time=4528.655 buffer_time=2.296 print_stall=0 extruder: target=240 temp=239.8 pwm=0.529
Stats 799303.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9376033 bytes_read=1901141 bytes_retransmit=9 bytes_invalid=0 send_seq=177376 receive_seq=177376 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=2327 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=1670494 sysload=0.54 cputime=256.377 memavail=7290708 print_time=4530.039 buffer_time=2.678 print_stall=0 extruder: target=240 temp=240.0 pwm=0.396
Stats 799304.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9380011 bytes_read=1901769 bytes_retransmit=9 bytes_invalid=0 send_seq=177446 receive_seq=177446 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2430 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1671120 sysload=0.54 cputime=256.458 memavail=7290708 print_time=4530.900 buffer_time=2.537 print_stall=0 extruder: target=240 temp=240.2 pwm=0.344
Stats 799305.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9385321 bytes_read=1902507 bytes_retransmit=9 bytes_invalid=0 send_seq=177538 receive_seq=177538 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=260 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=1671937 sysload=0.58 cputime=256.555 memavail=7290708 print_time=4531.531 buffer_time=2.167 print_stall=0 extruder: target=240 temp=240.0 pwm=0.494
Stats 799306.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9388011 bytes_read=1903074 bytes_retransmit=9 bytes_invalid=0 send_seq=177590 receive_seq=177590 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=1672312 sysload=0.58 cputime=256.634 memavail=7290708 print_time=4532.838 buffer_time=2.473 print_stall=0 extruder: target=240 temp=240.0 pwm=0.470
Stats 799307.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9390718 bytes_read=1903633 bytes_retransmit=9 bytes_invalid=0 send_seq=177643 receive_seq=177643 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.306 sd_pos=1673054 sysload=0.58 cputime=256.705 memavail=7290484 print_time=4534.377 buffer_time=3.011 print_stall=0 extruder: target=240 temp=240.3 pwm=0.316
Stats 799308.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9390960 bytes_read=1903991 bytes_retransmit=9 bytes_invalid=0 send_seq=177659 receive_seq=177659 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=1673054 sysload=0.58 cputime=256.759 memavail=7289728 print_time=4534.377 buffer_time=2.010 print_stall=0 extruder: target=240 temp=239.9 pwm=0.483
Stats 799309.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9394110 bytes_read=1904613 bytes_retransmit=9 bytes_invalid=0 send_seq=177722 receive_seq=177722 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=1673554 sysload=0.58 cputime=256.824 memavail=7289732 print_time=4536.208 buffer_time=2.840 print_stall=0 extruder: target=240 temp=240.0 pwm=0.418
Stats 799310.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9395262 bytes_read=1905031 bytes_retransmit=9 bytes_invalid=0 send_seq=177750 receive_seq=177750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=1673750 sysload=0.53 cputime=256.872 memavail=7289732 print_time=4537.161 buffer_time=2.793 print_stall=0 extruder: target=240 temp=240.2 pwm=0.311
Stats 799311.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9396309 bytes_read=1905439 bytes_retransmit=9 bytes_invalid=0 send_seq=177776 receive_seq=177776 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=79.9 pwm=0.416 sd_pos=1674047 sysload=0.53 cputime=256.924 memavail=7289732 print_time=4537.768 buffer_time=2.400 print_stall=0 extruder: target=240 temp=240.0 pwm=0.418
Stats 799312.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9397190 bytes_read=1905886 bytes_retransmit=9 bytes_invalid=0 send_seq=177801 receive_seq=177801 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=1674185 sysload=0.53 cputime=256.982 memavail=7289732 print_time=4538.691 buffer_time=2.322 print_stall=0 extruder: target=240 temp=240.0 pwm=0.464
Stats 799313.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9398267 bytes_read=1906294 bytes_retransmit=9 bytes_invalid=0 send_seq=177827 receive_seq=177827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=79.9 pwm=0.413 sd_pos=1674408 sysload=0.53 cputime=257.038 memavail=7289732 print_time=4539.625 buffer_time=2.255 print_stall=0 extruder: target=240 temp=240.0 pwm=0.470
Stats 799314.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9399506 bytes_read=1906722 bytes_retransmit=9 bytes_invalid=0 send_seq=177857 receive_seq=177857 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1674520 sysload=0.53 cputime=257.097 memavail=7289732 print_time=4540.658 buffer_time=2.288 print_stall=0 extruder: target=240 temp=240.0 pwm=0.432
Stats 799315.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9399881 bytes_read=1907104 bytes_retransmit=9 bytes_invalid=0 send_seq=177872 receive_seq=177872 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.346 sd_pos=1674577 sysload=0.49 cputime=257.146 memavail=7289732 print_time=4541.992 buffer_time=2.621 print_stall=0 extruder: target=240 temp=240.2 pwm=0.345
Stats 799316.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9400369 bytes_read=1907467 bytes_retransmit=9 bytes_invalid=0 send_seq=177889 receive_seq=177889 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=1674633 sysload=0.49 cputime=257.205 memavail=7289732 print_time=4542.432 buffer_time=2.060 print_stall=0 extruder: target=240 temp=239.9 pwm=0.444
Stats 799317.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=9402692 bytes_read=1908005 bytes_retransmit=9 bytes_invalid=0 send_seq=177938 receive_seq=177938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=1674992 sysload=0.49 cputime=257.275 memavail=7289732 print_time=4543.589 buffer_time=2.216 print_stall=0 extruder: target=240 temp=240.4 pwm=0.291
Stats 799318.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=9406707 bytes_read=1908682 bytes_retransmit=9 bytes_invalid=0 send_seq=178012 receive_seq=178012 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992729 heater_bed: target=80 temp=80.0 pwm=0.368 sd_pos=1675475 sysload=0.49 cputime=257.352 memavail=7289880 print_time=4544.960 buffer_time=2.586 print_stall=0 extruder: target=240 temp=239.7 pwm=0.607
Stats 799319.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=9407952 bytes_read=1909105 bytes_retransmit=9 bytes_invalid=0 send_seq=178041 receive_seq=178041 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.368 sd_pos=1675781 sysload=0.49 cputime=257.408 memavail=7289760 print_time=4545.485 buffer_time=2.111 print_stall=0 extruder: target=240 temp=239.6 pwm=0.580
Stats 799320.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=9411671 bytes_read=1909738 bytes_retransmit=9 bytes_invalid=0 send_seq=178112 receive_seq=178112 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=1676488 sysload=0.53 cputime=257.493 memavail=7289760 print_time=4546.864 buffer_time=2.489 print_stall=0 extruder: target=240 temp=239.9 pwm=0.465
Stats 799321.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=9413559 bytes_read=1910238 bytes_retransmit=9 bytes_invalid=0 send_seq=178152 receive_seq=178152 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992722 heater_bed: target=80 temp=80.0 pwm=0.369 sd_pos=1676796 sysload=0.53 cputime=257.556 memavail=7289760 print_time=4547.549 buffer_time=2.174 print_stall=0 extruder: target=240 temp=239.8 pwm=0.509
Stats 799322.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9416111 bytes_read=1910775 bytes_retransmit=9 bytes_invalid=0 send_seq=178202 receive_seq=178202 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992721 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=1677143 sysload=0.53 cputime=257.620 memavail=7289760 print_time=4548.458 buffer_time=2.082 print_stall=0 extruder: target=240 temp=240.0 pwm=0.442
Stats 799323.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9418436 bytes_read=1911288 bytes_retransmit=9 bytes_invalid=0 send_seq=178250 receive_seq=178250 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=1677615 sysload=0.53 cputime=257.697 memavail=7289760 print_time=4549.439 buffer_time=2.063 print_stall=0 extruder: target=240 temp=239.8 pwm=0.498
Stats 799324.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9421210 bytes_read=1911875 bytes_retransmit=9 bytes_invalid=0 send_seq=178306 receive_seq=178306 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=1678499 sysload=0.53 cputime=257.775 memavail=7292884 print_time=4550.432 buffer_time=2.055 print_stall=0 extruder: target=240 temp=240.0 pwm=0.423
Stats 799325.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9422253 bytes_read=1912278 bytes_retransmit=9 bytes_invalid=0 send_seq=178331 receive_seq=178331 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=1678815 sysload=0.49 cputime=257.833 memavail=7292884 print_time=4551.404 buffer_time=2.027 print_stall=0 extruder: target=240 temp=239.7 pwm=0.571
Stats 799326.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9424388 bytes_read=1912811 bytes_retransmit=9 bytes_invalid=0 send_seq=178379 receive_seq=178379 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.489 sd_pos=1679237 sysload=0.49 cputime=257.894 memavail=7292884 print_time=4552.475 buffer_time=2.097 print_stall=0 extruder: target=240 temp=240.1 pwm=0.332
Stats 799327.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9425595 bytes_read=1913264 bytes_retransmit=9 bytes_invalid=0 send_seq=178408 receive_seq=178408 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=1679393 sysload=0.49 cputime=257.956 memavail=7292884 print_time=4553.496 buffer_time=2.118 print_stall=0 extruder: target=240 temp=240.1 pwm=0.380
Stats 799328.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9428420 bytes_read=1913817 bytes_retransmit=9 bytes_invalid=0 send_seq=178463 receive_seq=178463 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=1679881 sysload=0.49 cputime=258.022 memavail=7292128 print_time=4555.022 buffer_time=2.643 print_stall=0 extruder: target=240 temp=240.0 pwm=0.468
Stats 799329.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9429370 bytes_read=1914230 bytes_retransmit=9 bytes_invalid=0 send_seq=178487 receive_seq=178487 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=1680149 sysload=0.49 cputime=258.081 memavail=7292128 print_time=4555.707 buffer_time=2.327 print_stall=0 extruder: target=240 temp=240.3 pwm=0.294
Stats 799330.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9430617 bytes_read=1914682 bytes_retransmit=9 bytes_invalid=0 send_seq=178519 receive_seq=178519 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=1680316 sysload=0.61 cputime=258.137 memavail=7292128 print_time=4556.818 buffer_time=2.438 print_stall=0 extruder: target=240 temp=240.1 pwm=0.399
Stats 799331.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9431516 bytes_read=1915085 bytes_retransmit=9 bytes_invalid=0 send_seq=178544 receive_seq=178544 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=1680493 sysload=0.61 cputime=258.193 memavail=7292128 print_time=4557.419 buffer_time=2.039 print_stall=0 extruder: target=240 temp=240.2 pwm=0.376
Stats 799333.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9432660 bytes_read=1915538 bytes_retransmit=9 bytes_invalid=0 send_seq=178573 receive_seq=178573 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=1680671 sysload=0.61 cputime=258.250 memavail=7292128 print_time=4558.520 buffer_time=2.139 print_stall=0 extruder: target=240 temp=240.1 pwm=0.366
Stats 799334.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9433322 bytes_read=1915930 bytes_retransmit=9 bytes_invalid=0 send_seq=178593 receive_seq=178593 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1680728 sysload=0.61 cputime=258.309 memavail=7292128 print_time=4560.171 buffer_time=2.788 print_stall=0 extruder: target=240 temp=240.3 pwm=0.366
Stats 799335.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9433837 bytes_read=1916293 bytes_retransmit=9 bytes_invalid=0 send_seq=178610 receive_seq=178610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=79.9 pwm=0.417 sd_pos=1680784 sysload=0.61 cputime=258.362 memavail=7292128 print_time=4560.616 buffer_time=2.233 print_stall=0 extruder: target=240 temp=240.0 pwm=0.517
Stats 799336.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9436115 bytes_read=1916816 bytes_retransmit=9 bytes_invalid=0 send_seq=178656 receive_seq=178656 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=79.9 pwm=0.380 sd_pos=1681142 sysload=0.64 cputime=258.429 memavail=7292132 print_time=4561.779 buffer_time=2.395 print_stall=0 extruder: target=240 temp=239.9 pwm=0.445
Stats 799337.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9437856 bytes_read=1917298 bytes_retransmit=9 bytes_invalid=0 send_seq=178694 receive_seq=178694 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.380 sd_pos=1681343 sysload=0.64 cputime=258.492 memavail=7292292 print_time=4562.411 buffer_time=2.026 print_stall=0 extruder: target=240 temp=239.7 pwm=0.571
Stats 799338.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=9440520 bytes_read=1917856 bytes_retransmit=9 bytes_invalid=0 send_seq=178747 receive_seq=178747 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=79.9 pwm=0.470 sd_pos=1681705 sysload=0.64 cputime=258.553 memavail=7292164 print_time=4563.423 buffer_time=2.038 print_stall=0 extruder: target=240 temp=239.8 pwm=0.480
Stats 799339.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=9443899 bytes_read=1918474 bytes_retransmit=9 bytes_invalid=0 send_seq=178812 receive_seq=178812 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=79.9 pwm=0.520 sd_pos=1682215 sysload=0.64 cputime=258.619 memavail=7291688 print_time=4564.610 buffer_time=2.224 print_stall=0 extruder: target=240 temp=239.8 pwm=0.531
Stats 799340.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=9446075 bytes_read=1919001 bytes_retransmit=9 bytes_invalid=0 send_seq=178859 receive_seq=178859 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=79.9 pwm=0.421 sd_pos=1682772 sysload=0.64 cputime=258.690 memavail=7291688 print_time=4565.525 buffer_time=2.138 print_stall=0 extruder: target=240 temp=240.0 pwm=0.439
Stats 799341.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=9448857 bytes_read=1919554 bytes_retransmit=9 bytes_invalid=0 send_seq=178914 receive_seq=178914 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=79.9 pwm=0.420 sd_pos=1683256 sysload=0.67 cputime=258.774 memavail=7291688 print_time=4566.597 buffer_time=2.209 print_stall=0 extruder: target=240 temp=240.0 pwm=0.461
Stats 799342.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=9451649 bytes_read=1920122 bytes_retransmit=9 bytes_invalid=0 send_seq=178969 receive_seq=178969 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=79.9 pwm=0.420 sd_pos=1684064 sysload=0.67 cputime=258.841 memavail=7291688 print_time=4567.694 buffer_time=2.304 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 799343.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9454081 bytes_read=1920670 bytes_retransmit=9 bytes_invalid=0 send_seq=179017 receive_seq=179017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=79.9 pwm=0.400 sd_pos=1684589 sysload=0.67 cputime=258.907 memavail=7291688 print_time=4568.588 buffer_time=2.198 print_stall=0 extruder: target=240 temp=239.9 pwm=0.465
Stats 799344.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9455074 bytes_read=1921068 bytes_retransmit=9 bytes_invalid=0 send_seq=179041 receive_seq=179041 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=79.9 pwm=0.400 sd_pos=1684916 sysload=0.67 cputime=258.970 memavail=7291688 print_time=4569.551 buffer_time=2.160 print_stall=0 extruder: target=240 temp=240.1 pwm=0.393
Stats 799345.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9457116 bytes_read=1921576 bytes_retransmit=9 bytes_invalid=0 send_seq=179084 receive_seq=179084 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=79.9 pwm=0.504 sd_pos=1685341 sysload=0.67 cputime=259.035 memavail=7291688 print_time=4570.612 buffer_time=2.219 print_stall=0 extruder: target=240 temp=240.0 pwm=0.481
Stats 799346.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9458319 bytes_read=1922013 bytes_retransmit=9 bytes_invalid=0 send_seq=179113 receive_seq=179113 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=79.9 pwm=0.481 sd_pos=1685497 sysload=0.62 cputime=259.102 memavail=7291688 print_time=4571.628 buffer_time=2.234 print_stall=0 extruder: target=240 temp=239.9 pwm=0.516
Stats 799347.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9460458 bytes_read=1922506 bytes_retransmit=9 bytes_invalid=0 send_seq=179156 receive_seq=179156 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=79.9 pwm=0.481 sd_pos=1685862 sysload=0.62 cputime=259.164 memavail=7291688 print_time=4572.465 buffer_time=2.071 print_stall=0 extruder: target=240 temp=240.0 pwm=0.434
Stats 799348.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9461889 bytes_read=1922974 bytes_retransmit=9 bytes_invalid=0 send_seq=179188 receive_seq=179188 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=79.9 pwm=0.481 sd_pos=1686223 sysload=0.62 cputime=259.221 memavail=7291436 print_time=4573.787 buffer_time=2.392 print_stall=0 extruder: target=240 temp=239.8 pwm=0.510
Stats 799349.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9463168 bytes_read=1923411 bytes_retransmit=9 bytes_invalid=0 send_seq=179217 receive_seq=179217 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=79.9 pwm=0.422 sd_pos=1686418 sysload=0.62 cputime=259.289 memavail=7291184 print_time=4574.937 buffer_time=2.539 print_stall=0 extruder: target=240 temp=239.8 pwm=0.520
Stats 799350.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9464084 bytes_read=1923804 bytes_retransmit=9 bytes_invalid=0 send_seq=179240 receive_seq=179240 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=79.9 pwm=0.482 sd_pos=1686584 sysload=0.62 cputime=259.344 memavail=7291192 print_time=4575.547 buffer_time=2.148 print_stall=0 extruder: target=240 temp=240.1 pwm=0.433
Stats 799351.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9465217 bytes_read=1924227 bytes_retransmit=9 bytes_invalid=0 send_seq=179266 receive_seq=179266 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=79.9 pwm=0.473 sd_pos=1686752 sysload=0.57 cputime=259.403 memavail=7291192 print_time=4576.643 buffer_time=2.244 print_stall=0 extruder: target=240 temp=240.3 pwm=0.361
Stats 799352.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9465791 bytes_read=1924624 bytes_retransmit=9 bytes_invalid=0 send_seq=179284 receive_seq=179284 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=79.9 pwm=0.483 sd_pos=1686752 sysload=0.57 cputime=259.452 memavail=7291192 print_time=4577.476 buffer_time=2.076 print_stall=0 extruder: target=240 temp=240.1 pwm=0.439
Stats 799353.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9466408 bytes_read=1924997 bytes_retransmit=9 bytes_invalid=0 send_seq=179303 receive_seq=179303 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=79.9 pwm=0.412 sd_pos=1686865 sysload=0.57 cputime=259.500 memavail=7290968 print_time=4578.737 buffer_time=2.337 print_stall=0 extruder: target=240 temp=239.8 pwm=0.591
Stats 799354.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9468664 bytes_read=1925515 bytes_retransmit=9 bytes_invalid=0 send_seq=179348 receive_seq=179348 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=79.9 pwm=0.412 sd_pos=1687224 sysload=0.57 cputime=259.563 memavail=7290968 print_time=4579.896 buffer_time=2.495 print_stall=0 extruder: target=240 temp=239.9 pwm=0.475
Stats 799355.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9470373 bytes_read=1925997 bytes_retransmit=9 bytes_invalid=0 send_seq=179386 receive_seq=179386 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=79.9 pwm=0.412 sd_pos=1687428 sysload=0.57 cputime=259.635 memavail=7291212 print_time=4580.537 buffer_time=2.134 print_stall=0 extruder: target=240 temp=240.1 pwm=0.395
Stats 799356.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9473116 bytes_read=1926545 bytes_retransmit=9 bytes_invalid=0 send_seq=179440 receive_seq=179440 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=119992812 heater_bed: target=80 temp=79.9 pwm=0.472 sd_pos=1687818 sysload=0.52 cputime=259.708 memavail=7291212 print_time=4581.573 buffer_time=2.170 print_stall=0 extruder: target=240 temp=239.8 pwm=0.502
Stats 799357.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9476870 bytes_read=1927209 bytes_retransmit=9 bytes_invalid=0 send_seq=179511 receive_seq=179511 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992807 heater_bed: target=80 temp=79.9 pwm=0.444 sd_pos=1688382 sysload=0.52 cputime=259.776 memavail=7291212 print_time=4582.848 buffer_time=2.445 print_stall=0 extruder: target=240 temp=239.8 pwm=0.534
Stats 799358.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9478529 bytes_read=1927669 bytes_retransmit=9 bytes_invalid=0 send_seq=179546 receive_seq=179546 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992795 heater_bed: target=80 temp=79.9 pwm=0.444 sd_pos=1688801 sysload=0.52 cputime=259.840 memavail=7291212 print_time=4583.532 buffer_time=2.128 print_stall=0 extruder: target=240 temp=240.0 pwm=0.475
Stats 799359.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9480660 bytes_read=1928155 bytes_retransmit=9 bytes_invalid=0 send_seq=179589 receive_seq=179589 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=79.9 pwm=0.444 sd_pos=1689305 sysload=0.52 cputime=259.898 memavail=7290960 print_time=4584.471 buffer_time=2.065 print_stall=0 extruder: target=240 temp=240.3 pwm=0.316
Stats 799360.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9483991 bytes_read=1928765 bytes_retransmit=9 bytes_invalid=0 send_seq=179653 receive_seq=179653 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=80 temp=79.9 pwm=0.391 sd_pos=1689814 sysload=0.52 cputime=259.954 memavail=7290960 print_time=4585.524 buffer_time=2.119 print_stall=0 extruder: target=240 temp=240.0 pwm=0.403
Stats 799361.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9487003 bytes_read=1929352 bytes_retransmit=9 bytes_invalid=0 send_seq=179712 receive_seq=179712 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=79.9 pwm=0.468 sd_pos=1690720 sysload=0.48 cputime=260.022 memavail=7290964 print_time=4586.700 buffer_time=2.295 print_stall=0 extruder: target=240 temp=240.1 pwm=0.373
Stats 799362.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9488027 bytes_read=1929782 bytes_retransmit=9 bytes_invalid=0 send_seq=179737 receive_seq=179737 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=79.9 pwm=0.399 sd_pos=1691036 sysload=0.48 cputime=260.079 memavail=7290964 print_time=4587.656 buffer_time=2.249 print_stall=0 extruder: target=240 temp=240.0 pwm=0.479
Stats 799363.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9490129 bytes_read=1930305 bytes_retransmit=9 bytes_invalid=0 send_seq=179783 receive_seq=179783 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=79.9 pwm=0.414 sd_pos=1691453 sysload=0.48 cputime=260.139 memavail=7290964 print_time=4588.707 buffer_time=2.299 print_stall=0 extruder: target=240 temp=240.1 pwm=0.399
Stats 799364.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9491305 bytes_read=1930742 bytes_retransmit=9 bytes_invalid=0 send_seq=179812 receive_seq=179812 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=79.9 pwm=0.480 sd_pos=1691608 sysload=0.48 cputime=260.193 memavail=7290964 print_time=4589.718 buffer_time=2.310 print_stall=0 extruder: target=240 temp=239.9 pwm=0.437
Stats 799365.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9493441 bytes_read=1931240 bytes_retransmit=9 bytes_invalid=0 send_seq=179856 receive_seq=179856 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=79.9 pwm=0.531 sd_pos=1691978 sysload=0.48 cputime=260.257 memavail=7290964 print_time=4590.553 buffer_time=2.145 print_stall=0 extruder: target=240 temp=239.8 pwm=0.505
Stats 799366.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9494915 bytes_read=1931703 bytes_retransmit=9 bytes_invalid=0 send_seq=179890 receive_seq=179890 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=79.9 pwm=0.454 sd_pos=1692353 sysload=0.44 cputime=260.320 memavail=7290964 print_time=4591.865 buffer_time=2.456 print_stall=0 extruder: target=240 temp=239.9 pwm=0.417
Stats 799367.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9495896 bytes_read=1932140 bytes_retransmit=9 bytes_invalid=0 send_seq=179916 receive_seq=179916 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=79.9 pwm=0.372 sd_pos=1692490 sysload=0.44 cputime=260.373 memavail=7290964 print_time=4592.478 buffer_time=2.068 print_stall=0 extruder: target=240 temp=240.3 pwm=0.267
Stats 799368.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9497073 bytes_read=1932563 bytes_retransmit=9 bytes_invalid=0 send_seq=179945 receive_seq=179945 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=79.9 pwm=0.462 sd_pos=1692710 sysload=0.44 cputime=260.432 memavail=7290964 print_time=4593.634 buffer_time=2.223 print_stall=0 extruder: target=240 temp=240.2 pwm=0.404
Stats 799369.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9498184 bytes_read=1932991 bytes_retransmit=9 bytes_invalid=0 send_seq=179972 receive_seq=179972 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=79.9 pwm=0.462 sd_pos=1692878 sysload=0.44 cputime=260.496 memavail=7290964 print_time=4594.726 buffer_time=2.314 print_stall=0 extruder: target=240 temp=240.1 pwm=0.369
Stats 799370.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9498749 bytes_read=1933378 bytes_retransmit=9 bytes_invalid=0 send_seq=179991 receive_seq=179991 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=79.9 pwm=0.462 sd_pos=1692878 sysload=0.44 cputime=260.554 memavail=7290968 print_time=4595.558 buffer_time=2.146 print_stall=0 extruder: target=240 temp=240.0 pwm=0.449
Stats 799371.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9499308 bytes_read=1933751 bytes_retransmit=9 bytes_invalid=0 send_seq=180010 receive_seq=180010 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=1692991 sysload=0.40 cputime=260.612 memavail=7290968 print_time=4596.818 buffer_time=2.405 print_stall=0 extruder: target=240 temp=239.9 pwm=0.449
Stats 799372.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9501631 bytes_read=1934269 bytes_retransmit=9 bytes_invalid=0 send_seq=180055 receive_seq=180055 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=79.9 pwm=0.382 sd_pos=1693347 sysload=0.40 cputime=260.684 memavail=7290968 print_time=4597.974 buffer_time=2.560 print_stall=0 extruder: target=240 temp=239.8 pwm=0.508
Stats 799373.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9503379 bytes_read=1934771 bytes_retransmit=9 bytes_invalid=0 send_seq=180094 receive_seq=180094 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=79.9 pwm=0.390 sd_pos=1693546 sysload=0.40 cputime=260.743 memavail=7290968 print_time=4598.621 buffer_time=2.206 print_stall=0 extruder: target=240 temp=239.6 pwm=0.577
Stats 799374.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9506157 bytes_read=1935324 bytes_retransmit=9 bytes_invalid=0 send_seq=180149 receive_seq=180149 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=79.9 pwm=0.390 sd_pos=1693961 sysload=0.40 cputime=260.808 memavail=7290744 print_time=4599.668 buffer_time=2.252 print_stall=0 extruder: target=240 temp=239.9 pwm=0.467
Stats 799375.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9508098 bytes_read=1935822 bytes_retransmit=9 bytes_invalid=0 send_seq=180190 receive_seq=180190 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=79.9 pwm=0.476 sd_pos=1694405 sysload=0.40 cputime=260.867 memavail=7290744 print_time=4600.427 buffer_time=2.011 print_stall=0 extruder: target=240 temp=240.3 pwm=0.303
Stats 799376.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9511333 bytes_read=1936419 bytes_retransmit=9 bytes_invalid=0 send_seq=180251 receive_seq=180251 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=79.9 pwm=0.440 sd_pos=1694966 sysload=0.37 cputime=260.932 memavail=7290744 print_time=4601.504 buffer_time=2.088 print_stall=0 extruder: target=240 temp=240.3 pwm=0.392
Stats 799377.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9515506 bytes_read=1937077 bytes_retransmit=9 bytes_invalid=0 send_seq=180327 receive_seq=180327 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.440 sd_pos=1695775 sysload=0.37 cputime=261.025 memavail=7284040 print_time=4603.024 buffer_time=2.606 print_stall=0 extruder: target=240 temp=239.8 pwm=0.583
Stats 799378.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9517350 bytes_read=1937596 bytes_retransmit=9 bytes_invalid=0 send_seq=180369 receive_seq=180369 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992731 heater_bed: target=80 temp=79.9 pwm=0.483 sd_pos=1696222 sysload=0.37 cputime=261.085 memavail=7289948 print_time=4603.626 buffer_time=2.209 print_stall=0 extruder: target=240 temp=239.8 pwm=0.553
Stats 799379.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9520039 bytes_read=1938153 bytes_retransmit=9 bytes_invalid=0 send_seq=180422 receive_seq=180422 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992721 heater_bed: target=80 temp=80.0 pwm=0.369 sd_pos=1697104 sysload=0.37 cputime=261.138 memavail=7289724 print_time=4604.440 buffer_time=2.021 print_stall=0 extruder: target=240 temp=240.1 pwm=0.396
Stats 799380.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9521535 bytes_read=1938601 bytes_retransmit=9 bytes_invalid=0 send_seq=180456 receive_seq=180456 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992714 heater_bed: target=80 temp=79.9 pwm=0.524 sd_pos=1697477 sysload=0.37 cputime=261.193 memavail=7289976 print_time=4605.741 buffer_time=2.322 print_stall=0 extruder: target=240 temp=240.3 pwm=0.315
Stats 799381.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9523580 bytes_read=1939109 bytes_retransmit=9 bytes_invalid=0 send_seq=180499 receive_seq=180499 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992715 heater_bed: target=80 temp=79.9 pwm=0.482 sd_pos=1697898 sysload=0.34 cputime=261.240 memavail=7289980 print_time=4606.779 buffer_time=2.359 print_stall=0 extruder: target=240 temp=240.1 pwm=0.409
Stats 799382.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9525035 bytes_read=1939561 bytes_retransmit=9 bytes_invalid=0 send_seq=180531 receive_seq=180531 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992713 heater_bed: target=80 temp=80.0 pwm=0.350 sd_pos=1698097 sysload=0.34 cputime=261.283 memavail=7289980 print_time=4608.016 buffer_time=2.595 print_stall=0 extruder: target=240 temp=239.8 pwm=0.555
Stats 799383.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9527052 bytes_read=1940069 bytes_retransmit=9 bytes_invalid=0 send_seq=180574 receive_seq=180574 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992709 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=1698460 sysload=0.34 cputime=261.345 memavail=7289756 print_time=4608.622 buffer_time=2.202 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 799384.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9528406 bytes_read=1940512 bytes_retransmit=9 bytes_invalid=0 send_seq=180604 receive_seq=180604 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992707 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=1698779 sysload=0.34 cputime=261.403 memavail=7289756 print_time=4609.898 buffer_time=2.476 print_stall=0 extruder: target=240 temp=239.9 pwm=0.464
Stats 799385.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9529378 bytes_read=1940929 bytes_retransmit=9 bytes_invalid=0 send_seq=180629 receive_seq=180629 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992706 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=1698918 sysload=0.34 cputime=261.466 memavail=7289768 print_time=4610.512 buffer_time=2.090 print_stall=0 extruder: target=240 temp=239.9 pwm=0.483
Stats 799386.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9530549 bytes_read=1941342 bytes_retransmit=9 bytes_invalid=0 send_seq=180656 receive_seq=180656 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=79.9 pwm=0.442 sd_pos=1699113 sysload=0.39 cputime=261.516 memavail=7289768 print_time=4611.640 buffer_time=2.218 print_stall=0 extruder: target=240 temp=239.6 pwm=0.611
Stats 799387.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9531696 bytes_read=1941770 bytes_retransmit=9 bytes_invalid=0 send_seq=180683 receive_seq=180683 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=79.9 pwm=0.426 sd_pos=1699309 sysload=0.39 cputime=261.587 memavail=7289768 print_time=4612.733 buffer_time=2.310 print_stall=0 extruder: target=240 temp=240.1 pwm=0.355
Stats 799388.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9532235 bytes_read=1942167 bytes_retransmit=9 bytes_invalid=0 send_seq=180701 receive_seq=180701 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=79.9 pwm=0.426 sd_pos=1699309 sysload=0.39 cputime=261.643 memavail=7289768 print_time=4613.557 buffer_time=2.133 print_stall=0 extruder: target=240 temp=240.1 pwm=0.384
Stats 799389.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9532833 bytes_read=1942535 bytes_retransmit=9 bytes_invalid=0 send_seq=180719 receive_seq=180719 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=79.9 pwm=0.426 sd_pos=1699422 sysload=0.39 cputime=261.689 memavail=7289264 print_time=4614.803 buffer_time=2.378 print_stall=0 extruder: target=240 temp=240.0 pwm=0.454
Stats 799390.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9535099 bytes_read=1943058 bytes_retransmit=9 bytes_invalid=0 send_seq=180765 receive_seq=180765 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=1699779 sysload=0.39 cputime=261.759 memavail=7289268 print_time=4615.950 buffer_time=2.525 print_stall=0 extruder: target=240 temp=239.9 pwm=0.445
Stats 799391.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9536840 bytes_read=1943540 bytes_retransmit=9 bytes_invalid=0 send_seq=180803 receive_seq=180803 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=1699983 sysload=0.44 cputime=261.810 memavail=7289268 print_time=4616.601 buffer_time=2.175 print_stall=0 extruder: target=240 temp=240.1 pwm=0.344
Stats 799392.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9539769 bytes_read=1944108 bytes_retransmit=9 bytes_invalid=0 send_seq=180861 receive_seq=180861 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=1700402 sysload=0.44 cputime=261.870 memavail=7289268 print_time=4617.624 buffer_time=2.197 print_stall=0 extruder: target=240 temp=239.8 pwm=0.506
Stats 799393.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9542070 bytes_read=1944650 bytes_retransmit=9 bytes_invalid=0 send_seq=180908 receive_seq=180908 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=1700904 sysload=0.44 cputime=261.941 memavail=7289268 print_time=4618.559 buffer_time=2.131 print_stall=0 extruder: target=240 temp=239.9 pwm=0.477
Stats 799394.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9545160 bytes_read=1945239 bytes_retransmit=9 bytes_invalid=0 send_seq=180969 receive_seq=180969 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=79.9 pwm=0.477 sd_pos=1701413 sysload=0.44 cputime=262.012 memavail=7289268 print_time=4619.576 buffer_time=2.147 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 799395.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9548074 bytes_read=1945730 bytes_retransmit=9 bytes_invalid=0 send_seq=181025 receive_seq=181013 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=690 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.380 sd_pos=1702177 sysload=0.44 cputime=262.080 memavail=7289268 print_time=4620.923 buffer_time=2.490 print_stall=0 extruder: target=240 temp=239.9 pwm=0.491
Stats 799396.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9550870 bytes_read=1946363 bytes_retransmit=9 bytes_invalid=0 send_seq=181081 receive_seq=181081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992724 heater_bed: target=80 temp=80.0 pwm=0.369 sd_pos=1702535 sysload=0.49 cputime=262.150 memavail=7289300 print_time=4621.542 buffer_time=2.109 print_stall=0 extruder: target=240 temp=240.1 pwm=0.430
Stats 799397.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9554232 bytes_read=1946970 bytes_retransmit=9 bytes_invalid=0 send_seq=181144 receive_seq=181144 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=1703578 sysload=0.49 cputime=262.234 memavail=7289300 print_time=4622.574 buffer_time=2.140 print_stall=0 extruder: target=240 temp=240.3 pwm=0.372
Stats 799398.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9555709 bytes_read=1947434 bytes_retransmit=9 bytes_invalid=0 send_seq=181178 receive_seq=181178 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992722 heater_bed: target=80 temp=80.0 pwm=0.437 sd_pos=1703973 sysload=0.49 cputime=262.293 memavail=7289332 print_time=4623.850 buffer_time=2.415 print_stall=0 extruder: target=240 temp=239.8 pwm=0.498
Stats 799399.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9557730 bytes_read=1947942 bytes_retransmit=9 bytes_invalid=0 send_seq=181221 receive_seq=181221 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.0 pwm=0.488 sd_pos=1704422 sysload=0.49 cputime=262.360 memavail=7289080 print_time=4624.886 buffer_time=2.443 print_stall=0 extruder: target=240 temp=240.0 pwm=0.429
Stats 799400.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9559155 bytes_read=1948399 bytes_retransmit=9 bytes_invalid=0 send_seq=181254 receive_seq=181254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=1704594 sysload=0.49 cputime=262.417 memavail=7289840 print_time=4626.086 buffer_time=2.643 print_stall=0 extruder: target=240 temp=240.0 pwm=0.410
Stats 799401.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9561184 bytes_read=1948897 bytes_retransmit=9 bytes_invalid=0 send_seq=181298 receive_seq=181298 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=79.9 pwm=0.508 sd_pos=1704954 sysload=0.61 cputime=262.480 memavail=7289840 print_time=4626.693 buffer_time=2.249 print_stall=0 extruder: target=240 temp=240.1 pwm=0.336
Stats 799402.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9562597 bytes_read=1949360 bytes_retransmit=9 bytes_invalid=0 send_seq=181332 receive_seq=181332 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=79.9 pwm=0.427 sd_pos=1705275 sysload=0.61 cputime=262.544 memavail=7289840 print_time=4627.944 buffer_time=2.499 print_stall=0 extruder: target=240 temp=240.3 pwm=0.320
Stats 799403.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9563590 bytes_read=1949797 bytes_retransmit=9 bytes_invalid=0 send_seq=181358 receive_seq=181358 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=79.9 pwm=0.415 sd_pos=1705414 sysload=0.61 cputime=262.598 memavail=7289616 print_time=4628.553 buffer_time=2.108 print_stall=0 extruder: target=240 temp=240.1 pwm=0.384
Stats 799404.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9564765 bytes_read=1950215 bytes_retransmit=9 bytes_invalid=0 send_seq=181386 receive_seq=181386 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=1705608 sysload=0.61 cputime=262.650 memavail=7289616 print_time=4629.665 buffer_time=2.219 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 799405.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9565907 bytes_read=1950648 bytes_retransmit=9 bytes_invalid=0 send_seq=181414 receive_seq=181414 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.370 sd_pos=1705803 sysload=0.61 cputime=262.714 memavail=7289616 print_time=4630.739 buffer_time=2.292 print_stall=0 extruder: target=240 temp=239.8 pwm=0.493
Stats 799406.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9566474 bytes_read=1951035 bytes_retransmit=9 bytes_invalid=0 send_seq=181433 receive_seq=181433 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.0 pwm=0.446 sd_pos=1705803 sysload=0.64 cputime=262.768 memavail=7289616 print_time=4631.548 buffer_time=2.100 print_stall=0 extruder: target=240 temp=239.7 pwm=0.502
Stats 799407.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9567123 bytes_read=1951423 bytes_retransmit=9 bytes_invalid=0 send_seq=181455 receive_seq=181455 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=1705927 sysload=0.64 cputime=262.825 memavail=7289616 print_time=4632.774 buffer_time=2.325 print_stall=0 extruder: target=240 temp=239.8 pwm=0.454
Stats 799408.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9569461 bytes_read=1951976 bytes_retransmit=9 bytes_invalid=0 send_seq=181504 receive_seq=181504 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992775 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=1706295 sysload=0.64 cputime=262.887 memavail=7289616 print_time=4633.909 buffer_time=2.461 print_stall=0 extruder: target=240 temp=240.1 pwm=0.390
Stats 799409.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9571216 bytes_read=1952458 bytes_retransmit=9 bytes_invalid=0 send_seq=181542 receive_seq=181542 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=1706496 sysload=0.64 cputime=262.941 memavail=7289616 print_time=4634.561 buffer_time=2.111 print_stall=0 extruder: target=240 temp=240.1 pwm=0.402
Stats 799410.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9574338 bytes_read=1953046 bytes_retransmit=9 bytes_invalid=0 send_seq=181604 receive_seq=181604 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=1706996 sysload=0.64 cputime=263.012 memavail=7290124 print_time=4635.622 buffer_time=2.172 print_stall=0 extruder: target=240 temp=239.9 pwm=0.497
Stats 799411.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9576618 bytes_read=1953569 bytes_retransmit=9 bytes_invalid=0 send_seq=181650 receive_seq=181650 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.487 sd_pos=1707537 sysload=0.83 cputime=263.081 memavail=7290124 print_time=4636.467 buffer_time=2.016 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 799412.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9579876 bytes_read=1954176 bytes_retransmit=9 bytes_invalid=0 send_seq=181713 receive_seq=181713 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=1708117 sysload=0.83 cputime=263.152 memavail=7290124 print_time=4637.456 buffer_time=2.002 print_stall=0 extruder: target=240 temp=239.9 pwm=0.462
Stats 799413.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9583204 bytes_read=1954790 bytes_retransmit=9 bytes_invalid=0 send_seq=181777 receive_seq=181777 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=1709089 sysload=0.83 cputime=263.231 memavail=7290380 print_time=4638.605 buffer_time=2.150 print_stall=0 extruder: target=240 temp=240.0 pwm=0.459
Stats 799414.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9586252 bytes_read=1955368 bytes_retransmit=9 bytes_invalid=0 send_seq=181834 receive_seq=181834 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=1709518 sysload=0.83 cputime=263.288 memavail=7290380 print_time=4639.530 buffer_time=2.075 print_stall=0 extruder: target=240 temp=240.0 pwm=0.459
Stats 799415.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9590450 bytes_read=1956055 bytes_retransmit=9 bytes_invalid=0 send_seq=181913 receive_seq=181913 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.375 sd_pos=1710706 sysload=0.83 cputime=263.371 memavail=7290604 print_time=4640.799 buffer_time=2.343 print_stall=0 extruder: target=240 temp=240.1 pwm=0.404
Stats 799416.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9591987 bytes_read=1956518 bytes_retransmit=9 bytes_invalid=0 send_seq=181950 receive_seq=181950 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.0 pwm=0.365 sd_pos=1711105 sysload=0.92 cputime=263.435 memavail=7290604 print_time=4642.090 buffer_time=2.634 print_stall=0 extruder: target=240 temp=240.1 pwm=0.454
Stats 799417.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9594035 bytes_read=1957056 bytes_retransmit=9 bytes_invalid=0 send_seq=181993 receive_seq=181993 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=1711527 sysload=0.92 cputime=263.500 memavail=7290604 print_time=4643.113 buffer_time=2.655 print_stall=0 extruder: target=240 temp=240.1 pwm=0.459
Stats 799418.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9594700 bytes_read=1957434 bytes_retransmit=9 bytes_invalid=0 send_seq=182013 receive_seq=182013 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=1711609 sysload=0.92 cputime=263.555 memavail=7290604 print_time=4643.483 buffer_time=2.024 print_stall=0 extruder: target=240 temp=240.3 pwm=0.326
Stats 799419.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9597532 bytes_read=1957992 bytes_retransmit=9 bytes_invalid=0 send_seq=182069 receive_seq=182069 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=1712087 sysload=0.92 cputime=263.623 memavail=7290352 print_time=4644.937 buffer_time=2.477 print_stall=0 extruder: target=240 temp=239.9 pwm=0.525
Stats 799420.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9598333 bytes_read=1958414 bytes_retransmit=9 bytes_invalid=0 send_seq=182092 receive_seq=182092 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=80 temp=80.0 pwm=0.446 sd_pos=1712166 sysload=0.92 cputime=263.682 memavail=7290100 print_time=4645.571 buffer_time=2.111 print_stall=0 extruder: target=240 temp=239.9 pwm=0.446
Stats 799421.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9599832 bytes_read=1958837 bytes_retransmit=9 bytes_invalid=0 send_seq=182125 receive_seq=182121 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.446 sd_pos=1712545 sysload=0.93 cputime=263.741 memavail=7290100 print_time=4646.807 buffer_time=2.346 print_stall=0 extruder: target=240 temp=240.2 pwm=0.376
Stats 799422.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9601054 bytes_read=1959285 bytes_retransmit=9 bytes_invalid=0 send_seq=182155 receive_seq=182155 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.446 sd_pos=1712740 sysload=0.93 cputime=263.797 memavail=7290100 print_time=4647.925 buffer_time=2.463 print_stall=0 extruder: target=240 temp=240.2 pwm=0.344
Stats 799423.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9601896 bytes_read=1959743 bytes_retransmit=9 bytes_invalid=0 send_seq=182180 receive_seq=182180 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=1712880 sysload=0.93 cputime=263.866 memavail=7290100 print_time=4648.567 buffer_time=2.104 print_stall=0 extruder: target=240 temp=240.2 pwm=0.365
Stats 799424.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9602786 bytes_read=1960136 bytes_retransmit=9 bytes_invalid=0 send_seq=182203 receive_seq=182203 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=1712936 sysload=0.93 cputime=263.930 memavail=7290100 print_time=4649.817 buffer_time=2.354 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 799425.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9603101 bytes_read=1960489 bytes_retransmit=9 bytes_invalid=0 send_seq=182218 receive_seq=182218 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.429 sd_pos=1712993 sysload=0.93 cputime=263.991 memavail=7289876 print_time=4650.614 buffer_time=2.150 print_stall=0 extruder: target=240 temp=240.0 pwm=0.461
Stats 799426.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9605693 bytes_read=1961046 bytes_retransmit=9 bytes_invalid=0 send_seq=182268 receive_seq=182268 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=1713407 sysload=1.02 cputime=264.063 memavail=7289876 print_time=4652.188 buffer_time=2.723 print_stall=0 extruder: target=240 temp=240.0 pwm=0.450
Stats 799427.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9607440 bytes_read=1961514 bytes_retransmit=9 bytes_invalid=0 send_seq=182306 receive_seq=182306 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=1713611 sysload=1.02 cputime=264.122 memavail=7289876 print_time=4652.844 buffer_time=2.379 print_stall=0 extruder: target=240 temp=239.9 pwm=0.468
Stats 799428.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=9609627 bytes_read=1962037 bytes_retransmit=9 bytes_invalid=0 send_seq=182352 receive_seq=182352 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.373 sd_pos=1713836 sysload=1.02 cputime=264.178 memavail=7289876 print_time=4653.611 buffer_time=2.145 print_stall=0 extruder: target=240 temp=240.0 pwm=0.414
Stats 799429.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=9612026 bytes_read=1962589 bytes_retransmit=9 bytes_invalid=0 send_seq=182402 receive_seq=182402 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=1714418 sysload=1.02 cputime=264.248 memavail=7289624 print_time=4654.466 buffer_time=1.999 print_stall=0 extruder: target=240 temp=239.9 pwm=0.465
Stats 799430.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=9615415 bytes_read=1963185 bytes_retransmit=9 bytes_invalid=0 send_seq=182467 receive_seq=182467 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=1714971 sysload=1.02 cputime=264.316 memavail=7290128 print_time=4655.732 buffer_time=2.265 print_stall=0 extruder: target=240 temp=240.0 pwm=0.411
Stats 799431.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=9617925 bytes_read=1963706 bytes_retransmit=9 bytes_invalid=0 send_seq=182517 receive_seq=182517 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=1715567 sysload=1.01 cputime=264.379 memavail=7290128 print_time=4656.536 buffer_time=2.068 print_stall=0 extruder: target=240 temp=240.1 pwm=0.356
Stats 799432.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=9621598 bytes_read=1964363 bytes_retransmit=9 bytes_invalid=0 send_seq=182587 receive_seq=182587 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992728 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1716160 sysload=1.01 cputime=264.447 memavail=7290128 print_time=4657.737 buffer_time=2.268 print_stall=0 extruder: target=240 temp=240.1 pwm=0.389
Stats 799433.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9625529 bytes_read=1965022 bytes_retransmit=9 bytes_invalid=0 send_seq=182660 receive_seq=182660 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992728 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1717260 sysload=1.01 cputime=264.524 memavail=7290128 print_time=4659.026 buffer_time=2.556 print_stall=0 extruder: target=240 temp=239.9 pwm=0.452
Stats 799434.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9626917 bytes_read=1965460 bytes_retransmit=9 bytes_invalid=0 send_seq=182692 receive_seq=182692 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1717628 sysload=1.01 cputime=264.582 memavail=7290128 print_time=4660.306 buffer_time=2.836 print_stall=0 extruder: target=240 temp=240.0 pwm=0.403
Stats 799435.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9628952 bytes_read=1965977 bytes_retransmit=9 bytes_invalid=0 send_seq=182734 receive_seq=182734 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=1718046 sysload=1.01 cputime=264.642 memavail=7290128 print_time=4661.328 buffer_time=2.857 print_stall=0 extruder: target=240 temp=239.9 pwm=0.492
Stats 799436.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9629620 bytes_read=1966360 bytes_retransmit=9 bytes_invalid=0 send_seq=182755 receive_seq=182755 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=80 temp=80.0 pwm=0.517 sd_pos=1718129 sysload=1.01 cputime=264.694 memavail=7290128 print_time=4661.699 buffer_time=2.227 print_stall=0 extruder: target=240 temp=240.0 pwm=0.412
Stats 799437.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9630569 bytes_read=1966758 bytes_retransmit=9 bytes_invalid=0 send_seq=182779 receive_seq=182779 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=1718243 sysload=1.01 cputime=264.749 memavail=7290128 print_time=4662.545 buffer_time=2.072 print_stall=0 extruder: target=240 temp=240.1 pwm=0.412
Stats 799438.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9633240 bytes_read=1967355 bytes_retransmit=9 bytes_invalid=0 send_seq=182834 receive_seq=182834 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=1718682 sysload=1.01 cputime=264.826 memavail=7290128 print_time=4663.788 buffer_time=2.315 print_stall=0 extruder: target=240 temp=240.1 pwm=0.480
Stats 799439.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9634468 bytes_read=1967778 bytes_retransmit=9 bytes_invalid=0 send_seq=182863 receive_seq=182863 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=1719003 sysload=1.01 cputime=264.882 memavail=7290128 print_time=4664.680 buffer_time=2.206 print_stall=0 extruder: target=240 temp=240.1 pwm=0.425
Stats 799440.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9635308 bytes_read=1968171 bytes_retransmit=9 bytes_invalid=0 send_seq=182886 receive_seq=182886 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=1719114 sysload=1.01 cputime=264.946 memavail=7289384 print_time=4665.544 buffer_time=2.068 print_stall=0 extruder: target=240 temp=239.9 pwm=0.466
Stats 799441.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9636441 bytes_read=1968618 bytes_retransmit=9 bytes_invalid=0 send_seq=182914 receive_seq=182914 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=1719337 sysload=1.01 cputime=265.014 memavail=7289384 print_time=4666.518 buffer_time=2.041 print_stall=0 extruder: target=240 temp=239.9 pwm=0.480
Stats 799442.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9637601 bytes_read=1969036 bytes_retransmit=9 bytes_invalid=0 send_seq=182942 receive_seq=182942 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=1719449 sysload=1.01 cputime=265.073 memavail=7289384 print_time=4667.524 buffer_time=2.047 print_stall=0 extruder: target=240 temp=240.2 pwm=0.310
Stats 799443.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9637985 bytes_read=1969409 bytes_retransmit=9 bytes_invalid=0 send_seq=182958 receive_seq=182958 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=1719506 sysload=1.01 cputime=265.131 memavail=7289384 print_time=4668.849 buffer_time=2.372 print_stall=0 extruder: target=240 temp=240.1 pwm=0.386
Stats 799444.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9638773 bytes_read=1969826 bytes_retransmit=9 bytes_invalid=0 send_seq=182980 receive_seq=182980 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=1719617 sysload=1.01 cputime=265.201 memavail=7289384 print_time=4669.563 buffer_time=2.086 print_stall=0 extruder: target=240 temp=240.2 pwm=0.385
Stats 799445.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9640760 bytes_read=1970314 bytes_retransmit=9 bytes_invalid=0 send_seq=183022 receive_seq=183022 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=1719946 sysload=1.01 cputime=265.269 memavail=7288868 print_time=4670.425 buffer_time=1.947 print_stall=0 extruder: target=240 temp=240.1 pwm=0.385
Stats 799446.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9644433 bytes_read=1970957 bytes_retransmit=9 bytes_invalid=0 send_seq=183092 receive_seq=183092 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119992802 heater_bed: target=80 temp=80.0 pwm=0.339 sd_pos=1720340 sysload=0.93 cputime=265.350 memavail=7288868 print_time=4671.856 buffer_time=2.377 print_stall=0 extruder: target=240 temp=240.1 pwm=0.499
Stats 799447.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9646792 bytes_read=1971494 bytes_retransmit=9 bytes_invalid=0 send_seq=183141 receive_seq=183141 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=1720921 sysload=0.93 cputime=265.421 memavail=7288868 print_time=4672.746 buffer_time=2.266 print_stall=0 extruder: target=240 temp=239.8 pwm=0.476
Stats 799448.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9649529 bytes_read=1972057 bytes_retransmit=9 bytes_invalid=0 send_seq=183195 receive_seq=183195 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=1721293 sysload=0.93 cputime=265.503 memavail=7288868 print_time=4673.682 buffer_time=2.200 print_stall=0 extruder: target=240 temp=239.9 pwm=0.476
Stats 799449.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9651742 bytes_read=1972580 bytes_retransmit=9 bytes_invalid=0 send_seq=183241 receive_seq=183241 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=1721932 sysload=0.93 cputime=265.581 memavail=7288868 print_time=4674.520 buffer_time=2.037 print_stall=0 extruder: target=240 temp=239.8 pwm=0.450
Stats 799450.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9655067 bytes_read=1973192 bytes_retransmit=9 bytes_invalid=0 send_seq=183305 receive_seq=183305 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=1722414 sysload=0.93 cputime=265.649 memavail=7288872 print_time=4675.636 buffer_time=2.149 print_stall=0 extruder: target=240 temp=240.1 pwm=0.401
Stats 799451.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9657536 bytes_read=1973710 bytes_retransmit=9 bytes_invalid=0 send_seq=183353 receive_seq=183353 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=1722940 sysload=0.86 cputime=265.710 memavail=7288872 print_time=4676.528 buffer_time=2.037 print_stall=0 extruder: target=240 temp=240.0 pwm=0.454
Stats 799452.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9660127 bytes_read=1974258 bytes_retransmit=9 bytes_invalid=0 send_seq=183404 receive_seq=183404 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992816 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=1723743 sysload=0.86 cputime=265.786 memavail=7288872 print_time=4677.565 buffer_time=2.071 print_stall=0 extruder: target=240 temp=239.8 pwm=0.510
Stats 799453.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9662930 bytes_read=1974846 bytes_retransmit=9 bytes_invalid=0 send_seq=183460 receive_seq=183460 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119992805 heater_bed: target=80 temp=80.0 pwm=0.393 sd_pos=1724467 sysload=0.86 cputime=265.855 memavail=7288872 print_time=4679.507 buffer_time=3.006 print_stall=0 extruder: target=240 temp=240.1 pwm=0.402
Stats 799454.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9663171 bytes_read=1975189 bytes_retransmit=9 bytes_invalid=0 send_seq=183473 receive_seq=183473 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=1724467 sysload=0.86 cputime=265.906 memavail=7288872 print_time=4679.507 buffer_time=2.005 print_stall=0 extruder: target=240 temp=240.0 pwm=0.419
Stats 799455.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9664586 bytes_read=1975637 bytes_retransmit=9 bytes_invalid=0 send_seq=183504 receive_seq=183504 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=1724666 sysload=0.86 cputime=265.965 memavail=7289128 print_time=4680.724 buffer_time=2.221 print_stall=0 extruder: target=240 temp=239.9 pwm=0.454
Stats 799456.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9667215 bytes_read=1976194 bytes_retransmit=9 bytes_invalid=0 send_seq=183557 receive_seq=183557 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=1725109 sysload=0.79 cputime=266.027 memavail=7288904 print_time=4681.967 buffer_time=2.463 print_stall=0 extruder: target=240 temp=240.1 pwm=0.449
Stats 799457.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9667970 bytes_read=1976587 bytes_retransmit=9 bytes_invalid=0 send_seq=183577 receive_seq=183577 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=1725348 sysload=0.79 cputime=266.082 memavail=7288680 print_time=4682.587 buffer_time=2.082 print_stall=0 extruder: target=240 temp=240.3 pwm=0.314
Stats 799458.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9669319 bytes_read=1977035 bytes_retransmit=9 bytes_invalid=0 send_seq=183608 receive_seq=183608 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1725541 sysload=0.79 cputime=266.146 memavail=7288680 print_time=4683.723 buffer_time=2.218 print_stall=0 extruder: target=240 temp=239.8 pwm=0.561
Stats 799459.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9670456 bytes_read=1977467 bytes_retransmit=9 bytes_invalid=0 send_seq=183636 receive_seq=183636 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=1725764 sysload=0.79 cputime=266.204 memavail=7288680 print_time=4684.700 buffer_time=2.192 print_stall=0 extruder: target=240 temp=240.1 pwm=0.454
Stats 799460.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9671552 bytes_read=1977880 bytes_retransmit=9 bytes_invalid=0 send_seq=183663 receive_seq=183663 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.447 sd_pos=1725876 sysload=0.79 cputime=266.265 memavail=7288684 print_time=4685.706 buffer_time=2.198 print_stall=0 extruder: target=240 temp=240.0 pwm=0.477
Stats 799461.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9671992 bytes_read=1978253 bytes_retransmit=9 bytes_invalid=0 send_seq=183679 receive_seq=183679 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=1725933 sysload=0.72 cputime=266.321 memavail=7288684 print_time=4687.032 buffer_time=2.523 print_stall=0 extruder: target=240 temp=240.1 pwm=0.425
Stats 799462.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9672748 bytes_read=1978660 bytes_retransmit=9 bytes_invalid=0 send_seq=183702 receive_seq=183702 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=1726044 sysload=0.72 cputime=266.380 memavail=7288684 print_time=4687.746 buffer_time=2.236 print_stall=0 extruder: target=240 temp=239.9 pwm=0.475
Stats 799463.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9674765 bytes_read=1979153 bytes_retransmit=9 bytes_invalid=0 send_seq=183742 receive_seq=183742 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=1726369 sysload=0.72 cputime=266.442 memavail=7288684 print_time=4688.609 buffer_time=2.099 print_stall=0 extruder: target=240 temp=240.1 pwm=0.422
Stats 799464.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9678475 bytes_read=1979801 bytes_retransmit=9 bytes_invalid=0 send_seq=183813 receive_seq=183813 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992747 heater_bed: target=80 temp=80.1 pwm=0.348 sd_pos=1726796 sysload=0.72 cputime=266.523 memavail=7288684 print_time=4690.043 buffer_time=2.533 print_stall=0 extruder: target=240 temp=239.9 pwm=0.526
Stats 799465.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9679938 bytes_read=1980257 bytes_retransmit=9 bytes_invalid=0 send_seq=183847 receive_seq=183847 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=80.1 pwm=0.421 sd_pos=1727103 sysload=0.72 cputime=266.586 memavail=7288460 print_time=4690.571 buffer_time=2.059 print_stall=0 extruder: target=240 temp=240.1 pwm=0.388
Stats 799466.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9683551 bytes_read=1980868 bytes_retransmit=9 bytes_invalid=0 send_seq=183915 receive_seq=183915 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992783 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=1727722 sysload=0.67 cputime=266.662 memavail=7288460 print_time=4691.862 buffer_time=2.349 print_stall=0 extruder: target=240 temp=239.9 pwm=0.494
Stats 799467.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9685625 bytes_read=1981371 bytes_retransmit=9 bytes_invalid=0 send_seq=183958 receive_seq=183958 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=1728387 sysload=0.67 cputime=266.725 memavail=7288460 print_time=4692.713 buffer_time=2.199 print_stall=0 extruder: target=240 temp=239.8 pwm=0.499
Stats 799468.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=9689578 bytes_read=1982044 bytes_retransmit=9 bytes_invalid=0 send_seq=184031 receive_seq=184031 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=1728925 sysload=0.67 cputime=266.797 memavail=7288460 print_time=4694.022 buffer_time=2.508 print_stall=0 extruder: target=240 temp=239.8 pwm=0.432
Stats 799469.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=9690937 bytes_read=1982477 bytes_retransmit=9 bytes_invalid=0 send_seq=184062 receive_seq=184062 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992763 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=1729257 sysload=0.67 cputime=266.858 memavail=7288460 print_time=4694.570 buffer_time=2.054 print_stall=0 extruder: target=240 temp=239.8 pwm=0.459
Stats 799470.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=9694025 bytes_read=1983070 bytes_retransmit=9 bytes_invalid=0 send_seq=184122 receive_seq=184122 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992755 heater_bed: target=80 temp=80.1 pwm=0.354 sd_pos=1730173 sysload=0.67 cputime=266.934 memavail=7288464 print_time=4695.745 buffer_time=2.228 print_stall=0 extruder: target=240 temp=240.0 pwm=0.435
Stats 799471.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=9695100 bytes_read=1983502 bytes_retransmit=9 bytes_invalid=0 send_seq=184150 receive_seq=184150 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=80 temp=80.1 pwm=0.408 sd_pos=1730491 sysload=0.61 cputime=266.991 memavail=7288464 print_time=4696.664 buffer_time=2.147 print_stall=0 extruder: target=240 temp=240.3 pwm=0.369
Stats 799472.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=9697147 bytes_read=1984000 bytes_retransmit=9 bytes_invalid=0 send_seq=184194 receive_seq=184194 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.1 pwm=0.371 sd_pos=1730922 sysload=0.61 cputime=267.053 memavail=7288464 print_time=4697.683 buffer_time=2.165 print_stall=0 extruder: target=240 temp=240.1 pwm=0.449
Stats 799473.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9698591 bytes_read=1984469 bytes_retransmit=9 bytes_invalid=0 send_seq=184226 receive_seq=184226 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=1731121 sysload=0.61 cputime=267.117 memavail=7288464 print_time=4698.895 buffer_time=2.378 print_stall=0 extruder: target=240 temp=240.1 pwm=0.458
Stats 799474.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9700596 bytes_read=1984966 bytes_retransmit=9 bytes_invalid=0 send_seq=184267 receive_seq=184267 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=1731508 sysload=0.61 cputime=267.188 memavail=7288464 print_time=4699.504 buffer_time=1.985 print_stall=0 extruder: target=240 temp=240.0 pwm=0.458
Stats 799475.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9701977 bytes_read=1985399 bytes_retransmit=9 bytes_invalid=0 send_seq=184298 receive_seq=184298 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=1731800 sysload=0.61 cputime=267.254 memavail=7288476 print_time=4700.756 buffer_time=2.236 print_stall=0 extruder: target=240 temp=240.1 pwm=0.386
Stats 799476.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9703358 bytes_read=1985852 bytes_retransmit=9 bytes_invalid=0 send_seq=184330 receive_seq=184330 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=1731993 sysload=0.56 cputime=267.316 memavail=7288480 print_time=4701.889 buffer_time=2.369 print_stall=0 extruder: target=240 temp=239.9 pwm=0.442
Stats 799477.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9704415 bytes_read=1986274 bytes_retransmit=9 bytes_invalid=0 send_seq=184356 receive_seq=184356 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=1732212 sysload=0.56 cputime=267.373 memavail=7288480 print_time=4702.863 buffer_time=2.343 print_stall=0 extruder: target=240 temp=239.9 pwm=0.457
Stats 799478.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9705322 bytes_read=1986687 bytes_retransmit=9 bytes_invalid=0 send_seq=184380 receive_seq=184380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1732324 sysload=0.56 cputime=267.435 memavail=7288480 print_time=4703.576 buffer_time=2.056 print_stall=0 extruder: target=240 temp=240.0 pwm=0.440
Stats 799479.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9706000 bytes_read=1987085 bytes_retransmit=9 bytes_invalid=0 send_seq=184401 receive_seq=184401 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=1732381 sysload=0.56 cputime=267.504 memavail=7288480 print_time=4705.190 buffer_time=2.669 print_stall=0 extruder: target=240 temp=240.1 pwm=0.377
Stats 799480.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9706547 bytes_read=1987472 bytes_retransmit=9 bytes_invalid=0 send_seq=184420 receive_seq=184420 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=80.1 pwm=0.290 sd_pos=1732437 sysload=0.56 cputime=267.562 memavail=7288736 print_time=4705.627 buffer_time=2.105 print_stall=0 extruder: target=240 temp=240.1 pwm=0.394
Stats 799481.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9708841 bytes_read=1987985 bytes_retransmit=9 bytes_invalid=0 send_seq=184467 receive_seq=184467 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=80.1 pwm=0.352 sd_pos=1732793 sysload=0.52 cputime=267.623 memavail=7288736 print_time=4706.764 buffer_time=2.242 print_stall=0 extruder: target=240 temp=240.0 pwm=0.444
Stats 799482.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9712545 bytes_read=1988628 bytes_retransmit=9 bytes_invalid=0 send_seq=184537 receive_seq=184537 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992722 heater_bed: target=80 temp=80.1 pwm=0.359 sd_pos=1733216 sysload=0.52 cputime=267.696 memavail=7288736 print_time=4708.191 buffer_time=2.668 print_stall=0 extruder: target=240 temp=239.7 pwm=0.552
Stats 799483.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9713932 bytes_read=1989106 bytes_retransmit=9 bytes_invalid=0 send_seq=184569 receive_seq=184569 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992709 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=1733466 sysload=0.52 cputime=267.755 memavail=7288736 print_time=4708.739 buffer_time=2.216 print_stall=0 extruder: target=240 temp=240.1 pwm=0.399
Stats 799484.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9716501 bytes_read=1989639 bytes_retransmit=9 bytes_invalid=0 send_seq=184620 receive_seq=184620 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992702 heater_bed: target=80 temp=80.1 pwm=0.359 sd_pos=1733836 sysload=0.52 cputime=267.823 memavail=7288736 print_time=4709.666 buffer_time=2.142 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 799485.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9718975 bytes_read=1990182 bytes_retransmit=9 bytes_invalid=0 send_seq=184670 receive_seq=184670 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992697 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=1734416 sysload=0.52 cputime=267.898 memavail=7288736 print_time=4710.631 buffer_time=2.106 print_stall=0 extruder: target=240 temp=240.0 pwm=0.504
Stats 799486.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9721223 bytes_read=1990699 bytes_retransmit=9 bytes_invalid=0 send_seq=184715 receive_seq=184715 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1734911 sysload=0.48 cputime=267.981 memavail=7288736 print_time=4711.612 buffer_time=2.087 print_stall=0 extruder: target=240 temp=240.2 pwm=0.340
Stats 799487.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9724450 bytes_read=1991277 bytes_retransmit=9 bytes_invalid=0 send_seq=184775 receive_seq=184775 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=1735392 sysload=0.48 cputime=268.053 memavail=7288736 print_time=4712.740 buffer_time=2.213 print_stall=0 extruder: target=240 temp=239.8 pwm=0.496
Stats 799488.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9726960 bytes_read=1991831 bytes_retransmit=9 bytes_invalid=0 send_seq=184824 receive_seq=184824 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992729 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=1736248 sysload=0.48 cputime=268.133 memavail=7288736 print_time=4713.570 buffer_time=2.043 print_stall=0 extruder: target=240 temp=240.1 pwm=0.402
Stats 799489.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9728483 bytes_read=1992303 bytes_retransmit=9 bytes_invalid=0 send_seq=184860 receive_seq=184860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992721 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1736620 sysload=0.48 cputime=268.206 memavail=7288736 print_time=4714.838 buffer_time=2.309 print_stall=0 extruder: target=240 temp=239.9 pwm=0.482
Stats 799490.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9730534 bytes_read=1992801 bytes_retransmit=9 bytes_invalid=0 send_seq=184904 receive_seq=184904 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992714 heater_bed: target=80 temp=80.0 pwm=0.366 sd_pos=1737068 sysload=0.48 cputime=268.273 memavail=7288488 print_time=4715.865 buffer_time=2.336 print_stall=0 extruder: target=240 temp=240.0 pwm=0.415
Stats 799491.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9731967 bytes_read=1993259 bytes_retransmit=9 bytes_invalid=0 send_seq=184937 receive_seq=184937 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992707 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=1737282 sysload=0.44 cputime=268.344 memavail=7288488 print_time=4717.057 buffer_time=2.527 print_stall=0 extruder: target=240 temp=239.8 pwm=0.480
Stats 799492.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9733990 bytes_read=1993771 bytes_retransmit=9 bytes_invalid=0 send_seq=184981 receive_seq=184981 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992701 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=1737600 sysload=0.44 cputime=268.418 memavail=7288488 print_time=4717.665 buffer_time=2.134 print_stall=0 extruder: target=240 temp=240.1 pwm=0.460
Stats 799493.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9735413 bytes_read=1994234 bytes_retransmit=9 bytes_invalid=0 send_seq=185015 receive_seq=185015 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992697 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=1737919 sysload=0.44 cputime=268.479 memavail=7288488 print_time=4718.907 buffer_time=2.375 print_stall=0 extruder: target=240 temp=239.8 pwm=0.540
Stats 799494.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9736687 bytes_read=1994682 bytes_retransmit=9 bytes_invalid=0 send_seq=185046 receive_seq=185046 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119992692 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=1738110 sysload=0.44 cputime=268.540 memavail=7288488 print_time=4720.032 buffer_time=2.499 print_stall=0 extruder: target=240 temp=239.8 pwm=0.573
Stats 799495.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9737627 bytes_read=1995104 bytes_retransmit=9 bytes_invalid=0 send_seq=185072 receive_seq=185072 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.486 sd_pos=1738286 sysload=0.44 cputime=268.606 memavail=7288488 print_time=4720.652 buffer_time=2.119 print_stall=0 extruder: target=240 temp=239.8 pwm=0.531
Stats 799496.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9738768 bytes_read=1995522 bytes_retransmit=9 bytes_invalid=0 send_seq=185100 receive_seq=185100 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992719 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1738462 sysload=0.48 cputime=268.671 memavail=7288488 print_time=4721.706 buffer_time=2.172 print_stall=0 extruder: target=240 temp=240.0 pwm=0.454
Stats 799497.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9739424 bytes_read=1995910 bytes_retransmit=9 bytes_invalid=0 send_seq=185119 receive_seq=185119 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992714 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1738519 sysload=0.48 cputime=268.734 memavail=7286976 print_time=4723.306 buffer_time=2.771 print_stall=0 extruder: target=240 temp=240.1 pwm=0.367
Stats 799498.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9739954 bytes_read=1996307 bytes_retransmit=9 bytes_invalid=0 send_seq=185137 receive_seq=185137 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992705 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=1738575 sysload=0.48 cputime=268.789 memavail=7291240 print_time=4723.739 buffer_time=2.203 print_stall=0 extruder: target=240 temp=240.1 pwm=0.430
Stats 799499.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9742246 bytes_read=1996815 bytes_retransmit=9 bytes_invalid=0 send_seq=185183 receive_seq=185183 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992696 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=1738931 sysload=0.48 cputime=268.837 memavail=7291240 print_time=4724.872 buffer_time=2.335 print_stall=0 extruder: target=240 temp=240.1 pwm=0.391
Stats 799500.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9745770 bytes_read=1997453 bytes_retransmit=9 bytes_invalid=0 send_seq=185252 receive_seq=185252 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992696 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=1739357 sysload=0.48 cputime=268.891 memavail=7290764 print_time=4726.209 buffer_time=2.671 print_stall=0 extruder: target=240 temp=239.9 pwm=0.501
Stats 799501.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9746871 bytes_read=1997873 bytes_retransmit=9 bytes_invalid=0 send_seq=185279 receive_seq=185279 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992690 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=1739524 sysload=0.44 cputime=268.924 memavail=7290764 print_time=4726.612 buffer_time=2.074 print_stall=0 extruder: target=240 temp=240.0 pwm=0.434
Stats 799502.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9749836 bytes_read=1998424 bytes_retransmit=9 bytes_invalid=0 send_seq=185335 receive_seq=185335 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992683 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=1739980 sysload=0.44 cputime=268.968 memavail=7290764 print_time=4727.660 buffer_time=2.122 print_stall=0 extruder: target=240 temp=239.7 pwm=0.547
Stats 799503.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9752306 bytes_read=1998985 bytes_retransmit=9 bytes_invalid=0 send_seq=185386 receive_seq=185386 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992679 heater_bed: target=80 temp=80.0 pwm=0.358 sd_pos=1740477 sysload=0.44 cputime=269.029 memavail=7290764 print_time=4728.623 buffer_time=2.084 print_stall=0 extruder: target=240 temp=239.9 pwm=0.480
Stats 799504.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9754247 bytes_read=1999482 bytes_retransmit=9 bytes_invalid=0 send_seq=185427 receive_seq=185427 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992729 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=1741090 sysload=0.44 cputime=269.115 memavail=7290764 print_time=4729.511 buffer_time=1.972 print_stall=0 extruder: target=240 temp=240.3 pwm=0.312
Stats 799505.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9757834 bytes_read=2000100 bytes_retransmit=9 bytes_invalid=0 send_seq=185495 receive_seq=185495 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992725 heater_bed: target=80 temp=80.1 pwm=0.348 sd_pos=1741519 sysload=0.44 cputime=269.180 memavail=7290780 print_time=4730.734 buffer_time=2.194 print_stall=0 extruder: target=240 temp=240.1 pwm=0.393
Stats 799506.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9761044 bytes_read=2000708 bytes_retransmit=9 bytes_invalid=0 send_seq=185558 receive_seq=185558 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992723 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=1742485 sysload=0.41 cputime=269.255 memavail=7290780 print_time=4731.750 buffer_time=2.210 print_stall=0 extruder: target=240 temp=239.9 pwm=0.438
Stats 799507.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9762512 bytes_read=2001160 bytes_retransmit=9 bytes_invalid=0 send_seq=185590 receive_seq=185590 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992716 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=1742858 sysload=0.41 cputime=269.307 memavail=7290780 print_time=4733.031 buffer_time=2.490 print_stall=0 extruder: target=240 temp=239.9 pwm=0.438
Stats 799508.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9764556 bytes_read=2001669 bytes_retransmit=9 bytes_invalid=0 send_seq=185633 receive_seq=185633 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992732 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=1743277 sysload=0.41 cputime=269.366 memavail=7290780 print_time=4734.054 buffer_time=2.511 print_stall=0 extruder: target=240 temp=240.1 pwm=0.367
Stats 799509.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9766035 bytes_read=2002132 bytes_retransmit=9 bytes_invalid=0 send_seq=185667 receive_seq=185667 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992722 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=1743476 sysload=0.41 cputime=269.428 memavail=7290780 print_time=4735.271 buffer_time=2.728 print_stall=0 extruder: target=240 temp=240.0 pwm=0.458
Stats 799510.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9768073 bytes_read=2002654 bytes_retransmit=9 bytes_invalid=0 send_seq=185713 receive_seq=185713 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992713 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=1743834 sysload=0.41 cputime=269.488 memavail=7290780 print_time=4735.879 buffer_time=2.336 print_stall=0 extruder: target=240 temp=239.8 pwm=0.507
Stats 799511.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9769401 bytes_read=2003087 bytes_retransmit=9 bytes_invalid=0 send_seq=185744 receive_seq=185744 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992707 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=1744153 sysload=0.54 cputime=269.551 memavail=7290780 print_time=4737.135 buffer_time=2.592 print_stall=0 extruder: target=240 temp=239.9 pwm=0.503
Stats 799512.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9770445 bytes_read=2003520 bytes_retransmit=9 bytes_invalid=0 send_seq=185772 receive_seq=185772 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992704 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=1744291 sysload=0.54 cputime=269.610 memavail=7290780 print_time=4737.756 buffer_time=2.212 print_stall=0 extruder: target=240 temp=240.1 pwm=0.429
Stats 799513.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9771317 bytes_read=2003947 bytes_retransmit=9 bytes_invalid=0 send_seq=185796 receive_seq=185796 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1744458 sysload=0.54 cputime=269.673 memavail=7290780 print_time=4738.664 buffer_time=2.119 print_stall=0 extruder: target=240 temp=240.2 pwm=0.417
Stats 799514.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9772648 bytes_read=2004375 bytes_retransmit=9 bytes_invalid=0 send_seq=185826 receive_seq=185826 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1744681 sysload=0.54 cputime=269.730 memavail=7290780 print_time=4739.959 buffer_time=2.413 print_stall=0 extruder: target=240 temp=240.1 pwm=0.418
Stats 799515.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9773230 bytes_read=2004758 bytes_retransmit=9 bytes_invalid=0 send_seq=185844 receive_seq=185844 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1744681 sysload=0.54 cputime=269.784 memavail=7290780 print_time=4740.776 buffer_time=2.229 print_stall=0 extruder: target=240 temp=240.1 pwm=0.423
Stats 799516.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9773545 bytes_read=2005125 bytes_retransmit=9 bytes_invalid=0 send_seq=185859 receive_seq=185859 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1744738 sysload=0.49 cputime=269.844 memavail=7290780 print_time=4741.575 buffer_time=2.028 print_stall=0 extruder: target=240 temp=240.1 pwm=0.464
Stats 799517.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9776155 bytes_read=2005658 bytes_retransmit=9 bytes_invalid=0 send_seq=185910 receive_seq=185910 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=1745148 sysload=0.49 cputime=269.911 memavail=7290332 print_time=4743.152 buffer_time=2.604 print_stall=0 extruder: target=240 temp=240.1 pwm=0.448
Stats 799518.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9777903 bytes_read=2006161 bytes_retransmit=9 bytes_invalid=0 send_seq=185949 receive_seq=185949 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=1745348 sysload=0.49 cputime=269.967 memavail=7290108 print_time=4743.810 buffer_time=2.262 print_stall=0 extruder: target=240 temp=239.8 pwm=0.560
Stats 799519.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9780741 bytes_read=2006733 bytes_retransmit=9 bytes_invalid=0 send_seq=186005 receive_seq=186005 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.1 pwm=0.428 sd_pos=1745760 sysload=0.49 cputime=270.029 memavail=7290108 print_time=4744.860 buffer_time=2.311 print_stall=0 extruder: target=240 temp=239.8 pwm=0.479
Stats 799520.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9784002 bytes_read=2007311 bytes_retransmit=9 bytes_invalid=0 send_seq=186065 receive_seq=186065 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=1746266 sysload=0.49 cputime=270.095 memavail=7289608 print_time=4745.949 buffer_time=2.398 print_stall=0 extruder: target=240 temp=239.8 pwm=0.479
Stats 799521.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9785598 bytes_read=2007774 bytes_retransmit=9 bytes_invalid=0 send_seq=186099 receive_seq=186099 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=1746624 sysload=0.45 cputime=270.158 memavail=7289608 print_time=4746.625 buffer_time=2.073 print_stall=0 extruder: target=240 temp=239.8 pwm=0.479
Stats 799522.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=9788307 bytes_read=2008326 bytes_retransmit=9 bytes_invalid=0 send_seq=186151 receive_seq=186151 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=80.1 pwm=0.360 sd_pos=1747425 sysload=0.45 cputime=270.226 memavail=7289608 print_time=4747.682 buffer_time=2.130 print_stall=0 extruder: target=240 temp=239.8 pwm=0.520
Stats 799523.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9791784 bytes_read=2008950 bytes_retransmit=9 bytes_invalid=0 send_seq=186217 receive_seq=186217 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992732 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=1747874 sysload=0.45 cputime=270.289 memavail=7289608 print_time=4748.908 buffer_time=2.355 print_stall=0 extruder: target=240 temp=240.1 pwm=0.373
Stats 799524.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9795010 bytes_read=2009548 bytes_retransmit=9 bytes_invalid=0 send_seq=186278 receive_seq=186278 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992724 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=1748868 sysload=0.45 cputime=270.354 memavail=7289608 print_time=4749.928 buffer_time=2.375 print_stall=0 extruder: target=240 temp=240.1 pwm=0.437
Stats 799525.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9796471 bytes_read=2010000 bytes_retransmit=9 bytes_invalid=0 send_seq=186310 receive_seq=186310 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992723 heater_bed: target=80 temp=80.0 pwm=0.426 sd_pos=1749239 sysload=0.45 cputime=270.415 memavail=7289608 print_time=4751.211 buffer_time=2.656 print_stall=0 extruder: target=240 temp=240.0 pwm=0.487
Stats 799526.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9798535 bytes_read=2010498 bytes_retransmit=9 bytes_invalid=0 send_seq=186354 receive_seq=186354 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=1749642 sysload=0.42 cputime=270.479 memavail=7289608 print_time=4752.235 buffer_time=2.680 print_stall=0 extruder: target=240 temp=239.9 pwm=0.486
Stats 799527.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9799219 bytes_read=2010901 bytes_retransmit=9 bytes_invalid=0 send_seq=186376 receive_seq=186376 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992728 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=1749725 sysload=0.42 cputime=270.533 memavail=7289608 print_time=4752.606 buffer_time=2.050 print_stall=0 extruder: target=240 temp=240.0 pwm=0.390
Stats 799528.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9802004 bytes_read=2011479 bytes_retransmit=9 bytes_invalid=0 send_seq=186430 receive_seq=186430 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=13 upcoming_bytes=0 freq=119992723 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=1750210 sysload=0.42 cputime=270.599 memavail=7289608 print_time=4754.062 buffer_time=2.505 print_stall=0 extruder: target=240 temp=240.1 pwm=0.347
Stats 799529.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9802855 bytes_read=2011882 bytes_retransmit=9 bytes_invalid=0 send_seq=186455 receive_seq=186455 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992724 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=1750301 sysload=0.42 cputime=270.650 memavail=7289608 print_time=4754.698 buffer_time=2.141 print_stall=0 extruder: target=240 temp=240.0 pwm=0.457
Stats 799530.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9804219 bytes_read=2012349 bytes_retransmit=9 bytes_invalid=0 send_seq=186487 receive_seq=186487 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992723 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=1750622 sysload=0.42 cputime=270.707 memavail=7289868 print_time=4755.586 buffer_time=2.029 print_stall=0 extruder: target=240 temp=240.1 pwm=0.463
Stats 799531.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9805639 bytes_read=2012782 bytes_retransmit=9 bytes_invalid=0 send_seq=186518 receive_seq=186518 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992720 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=1750872 sysload=0.38 cputime=270.773 memavail=7289644 print_time=4757.055 buffer_time=2.497 print_stall=0 extruder: target=240 temp=240.0 pwm=0.463
Stats 799532.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=9806448 bytes_read=2013170 bytes_retransmit=9 bytes_invalid=0 send_seq=186540 receive_seq=186540 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992713 heater_bed: target=80 temp=80.0 pwm=0.470 sd_pos=1751012 sysload=0.38 cputime=270.829 memavail=7289644 print_time=4757.699 buffer_time=2.140 print_stall=0 extruder: target=240 temp=239.9 pwm=0.463
Stats 799533.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9807389 bytes_read=2013622 bytes_retransmit=9 bytes_invalid=0 send_seq=186566 receive_seq=186566 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992712 heater_bed: target=80 temp=80.0 pwm=0.382 sd_pos=1751068 sysload=0.38 cputime=270.889 memavail=7289644 print_time=4758.951 buffer_time=2.391 print_stall=0 extruder: target=240 temp=239.9 pwm=0.487
Stats 799534.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9807715 bytes_read=2013975 bytes_retransmit=9 bytes_invalid=0 send_seq=186581 receive_seq=186581 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992708 heater_bed: target=80 temp=80.0 pwm=0.372 sd_pos=1751136 sysload=0.38 cputime=270.949 memavail=7289644 print_time=4759.749 buffer_time=2.189 print_stall=0 extruder: target=240 temp=240.0 pwm=0.413
Stats 799535.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9810330 bytes_read=2014513 bytes_retransmit=9 bytes_invalid=0 send_seq=186633 receive_seq=186633 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.366 sd_pos=1751563 sysload=0.38 cputime=271.032 memavail=7289396 print_time=4761.325 buffer_time=2.764 print_stall=0 extruder: target=240 temp=240.2 pwm=0.341
Stats 799536.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9812084 bytes_read=2015013 bytes_retransmit=9 bytes_invalid=0 send_seq=186672 receive_seq=186672 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=1751764 sysload=0.35 cputime=271.095 memavail=7289396 print_time=4761.980 buffer_time=2.419 print_stall=0 extruder: target=240 temp=240.3 pwm=0.337
Stats 799537.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9814140 bytes_read=2015500 bytes_retransmit=9 bytes_invalid=0 send_seq=186715 receive_seq=186715 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=80.1 pwm=0.366 sd_pos=1751985 sysload=0.35 cputime=271.163 memavail=7289396 print_time=4762.667 buffer_time=2.106 print_stall=0 extruder: target=240 temp=240.1 pwm=0.485
Stats 799538.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9818212 bytes_read=2016171 bytes_retransmit=9 bytes_invalid=0 send_seq=186792 receive_seq=186792 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=1752663 sysload=0.35 cputime=271.239 memavail=7289396 print_time=4764.101 buffer_time=2.540 print_stall=0 extruder: target=240 temp=240.0 pwm=0.480
Stats 799539.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9819887 bytes_read=2016656 bytes_retransmit=9 bytes_invalid=0 send_seq=186828 receive_seq=186828 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=1753024 sysload=0.35 cputime=271.296 memavail=7289396 print_time=4764.781 buffer_time=2.219 print_stall=0 extruder: target=240 temp=239.9 pwm=0.480
Stats 799540.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9822600 bytes_read=2017199 bytes_retransmit=9 bytes_invalid=0 send_seq=186881 receive_seq=186881 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=1753827 sysload=0.35 cputime=271.366 memavail=7289396 print_time=4765.858 buffer_time=2.295 print_stall=0 extruder: target=240 temp=240.1 pwm=0.343
Stats 799541.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9825154 bytes_read=2017732 bytes_retransmit=9 bytes_invalid=0 send_seq=186932 receive_seq=186932 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=1754063 sysload=0.32 cputime=271.421 memavail=7289396 print_time=4766.631 buffer_time=2.068 print_stall=0 extruder: target=240 temp=240.0 pwm=0.418
Stats 799542.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9829264 bytes_read=2018424 bytes_retransmit=9 bytes_invalid=0 send_seq=187009 receive_seq=187009 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=1755275 sysload=0.32 cputime=271.493 memavail=7289396 print_time=4768.111 buffer_time=2.547 print_stall=0 extruder: target=240 temp=240.2 pwm=0.328
Stats 799543.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9830739 bytes_read=2018883 bytes_retransmit=9 bytes_invalid=0 send_seq=187042 receive_seq=187042 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=1755648 sysload=0.32 cputime=271.563 memavail=7289556 print_time=4769.395 buffer_time=2.831 print_stall=0 extruder: target=240 temp=240.4 pwm=0.320
Stats 799544.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9832775 bytes_read=2019392 bytes_retransmit=9 bytes_invalid=0 send_seq=187086 receive_seq=187086 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=1756069 sysload=0.32 cputime=271.626 memavail=7289652 print_time=4770.423 buffer_time=2.859 print_stall=0 extruder: target=240 temp=240.0 pwm=0.453
Stats 799545.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9833426 bytes_read=2019799 bytes_retransmit=9 bytes_invalid=0 send_seq=187106 receive_seq=187106 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=1756153 sysload=0.32 cputime=271.678 memavail=7289652 print_time=4770.793 buffer_time=2.227 print_stall=0 extruder: target=240 temp=239.8 pwm=0.511
Stats 799546.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9834424 bytes_read=2020212 bytes_retransmit=9 bytes_invalid=0 send_seq=187133 receive_seq=187133 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=1756268 sysload=0.30 cputime=271.730 memavail=7289652 print_time=4771.644 buffer_time=2.078 print_stall=0 extruder: target=240 temp=239.8 pwm=0.533
Stats 799547.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9836989 bytes_read=2020750 bytes_retransmit=9 bytes_invalid=0 send_seq=187185 receive_seq=187185 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=1756709 sysload=0.30 cputime=271.793 memavail=7289652 print_time=4772.889 buffer_time=2.321 print_stall=0 extruder: target=240 temp=240.0 pwm=0.452
Stats 799548.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9838356 bytes_read=2021237 bytes_retransmit=9 bytes_invalid=0 send_seq=187218 receive_seq=187218 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=1757031 sysload=0.30 cputime=271.866 memavail=7289652 print_time=4773.773 buffer_time=2.205 print_stall=0 extruder: target=240 temp=239.8 pwm=0.513
Stats 799549.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9839175 bytes_read=2021625 bytes_retransmit=9 bytes_invalid=0 send_seq=187240 receive_seq=187240 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.436 sd_pos=1757143 sysload=0.30 cputime=271.927 memavail=7289652 print_time=4774.641 buffer_time=2.071 print_stall=0 extruder: target=240 temp=239.9 pwm=0.484
Stats 799550.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9840283 bytes_read=2022038 bytes_retransmit=9 bytes_invalid=0 send_seq=187267 receive_seq=187267 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992716 heater_bed: target=80 temp=80.0 pwm=0.507 sd_pos=1757365 sysload=0.30 cputime=272.003 memavail=7289156 print_time=4775.604 buffer_time=2.034 print_stall=0 extruder: target=240 temp=239.9 pwm=0.417
Stats 799551.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9841480 bytes_read=2022490 bytes_retransmit=9 bytes_invalid=0 send_seq=187296 receive_seq=187296 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992707 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=1757477 sysload=0.27 cputime=272.073 memavail=7289156 print_time=4776.610 buffer_time=2.041 print_stall=0 extruder: target=240 temp=239.8 pwm=0.566
Stats 799552.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=9841881 bytes_read=2022843 bytes_retransmit=9 bytes_invalid=0 send_seq=187311 receive_seq=187311 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=1757534 sysload=0.27 cputime=272.138 memavail=7289156 print_time=4777.931 buffer_time=2.360 print_stall=0 extruder: target=240 temp=240.0 pwm=0.458
Stats 799553.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=9842711 bytes_read=2023256 bytes_retransmit=9 bytes_invalid=0 send_seq=187335 receive_seq=187335 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=1757646 sysload=0.27 cputime=272.198 memavail=7289156 print_time=4778.646 buffer_time=2.073 print_stall=0 extruder: target=240 temp=239.9 pwm=0.509
Stats 799554.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=9846255 bytes_read=2023903 bytes_retransmit=9 bytes_invalid=0 send_seq=187403 receive_seq=187403 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=1758149 sysload=0.27 cputime=272.279 memavail=7289156 print_time=4780.158 buffer_time=2.584 print_stall=0 extruder: target=240 temp=240.1 pwm=0.412
Stats 799555.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=9848378 bytes_read=2024406 bytes_retransmit=9 bytes_invalid=0 send_seq=187448 receive_seq=187448 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.445 sd_pos=1758372 sysload=0.27 cputime=272.351 memavail=7289156 print_time=4780.844 buffer_time=2.269 print_stall=0 extruder: target=240 temp=239.9 pwm=0.481
Stats 799556.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=9851036 bytes_read=2024949 bytes_retransmit=9 bytes_invalid=0 send_seq=187501 receive_seq=187501 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992722 heater_bed: target=80 temp=80.0 pwm=0.521 sd_pos=1758936 sysload=0.25 cputime=272.424 memavail=7289156 print_time=4781.856 buffer_time=2.281 print_stall=0 extruder: target=240 temp=239.8 pwm=0.481
Stats 799557.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=9853478 bytes_read=2025501 bytes_retransmit=9 bytes_invalid=0 send_seq=187550 receive_seq=187550 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992721 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=1759236 sysload=0.25 cputime=272.490 memavail=7289156 print_time=4782.609 buffer_time=2.033 print_stall=0 extruder: target=240 temp=240.1 pwm=0.375
Stats 799558.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9856678 bytes_read=2026105 bytes_retransmit=9 bytes_invalid=0 send_seq=187612 receive_seq=187612 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992714 heater_bed: target=80 temp=80.0 pwm=0.323 sd_pos=1760008 sysload=0.25 cputime=272.568 memavail=7289156 print_time=4783.746 buffer_time=2.168 print_stall=0 extruder: target=240 temp=239.8 pwm=0.452
Stats 799559.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9859356 bytes_read=2026668 bytes_retransmit=9 bytes_invalid=0 send_seq=187666 receive_seq=187666 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992707 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=1760352 sysload=0.25 cputime=272.633 memavail=7289156 print_time=4784.613 buffer_time=2.035 print_stall=0 extruder: target=240 temp=239.8 pwm=0.533
Stats 799560.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9862320 bytes_read=2027250 bytes_retransmit=9 bytes_invalid=0 send_seq=187724 receive_seq=187724 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992705 heater_bed: target=80 temp=80.0 pwm=0.367 sd_pos=1760954 sysload=0.25 cputime=272.701 memavail=7289160 print_time=4785.668 buffer_time=2.090 print_stall=0 extruder: target=240 temp=240.3 pwm=0.293
Stats 799561.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9865022 bytes_read=2027803 bytes_retransmit=9 bytes_invalid=0 send_seq=187779 receive_seq=187779 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.375 sd_pos=1761776 sysload=0.23 cputime=272.769 memavail=7289160 print_time=4786.667 buffer_time=2.088 print_stall=0 extruder: target=240 temp=240.1 pwm=0.376
Stats 799562.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9866044 bytes_read=2028226 bytes_retransmit=9 bytes_invalid=0 send_seq=187805 receive_seq=187805 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=1762093 sysload=0.23 cputime=272.818 memavail=7289160 print_time=4787.584 buffer_time=2.004 print_stall=0 extruder: target=240 temp=240.2 pwm=0.376
Stats 799563.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9868143 bytes_read=2028754 bytes_retransmit=9 bytes_invalid=0 send_seq=187849 receive_seq=187849 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=1762543 sysload=0.23 cputime=272.874 memavail=7289160 print_time=4788.620 buffer_time=2.039 print_stall=0 extruder: target=240 temp=239.8 pwm=0.561
Stats 799564.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9869585 bytes_read=2029197 bytes_retransmit=9 bytes_invalid=0 send_seq=187882 receive_seq=187882 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=80 temp=80.0 pwm=0.332 sd_pos=1762714 sysload=0.23 cputime=272.927 memavail=7289160 print_time=4789.813 buffer_time=2.232 print_stall=0 extruder: target=240 temp=239.9 pwm=0.496
Stats 799565.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9872192 bytes_read=2029760 bytes_retransmit=9 bytes_invalid=0 send_seq=187936 receive_seq=187936 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=1763154 sysload=0.23 cputime=273.002 memavail=7289404 print_time=4791.047 buffer_time=2.465 print_stall=0 extruder: target=240 temp=240.0 pwm=0.426
Stats 799566.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9873006 bytes_read=2030167 bytes_retransmit=9 bytes_invalid=0 send_seq=187959 receive_seq=187959 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=1763394 sysload=0.21 cputime=273.056 memavail=7289404 print_time=4791.662 buffer_time=2.079 print_stall=0 extruder: target=240 temp=239.9 pwm=0.465
Stats 799567.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9874418 bytes_read=2030610 bytes_retransmit=9 bytes_invalid=0 send_seq=187992 receive_seq=187992 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992760 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=1763590 sysload=0.21 cputime=273.116 memavail=7289404 print_time=4792.771 buffer_time=2.187 print_stall=0 extruder: target=240 temp=240.3 pwm=0.319
Stats 799568.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9875517 bytes_read=2031048 bytes_retransmit=9 bytes_invalid=0 send_seq=188018 receive_seq=188018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.475 sd_pos=1763812 sysload=0.21 cputime=273.173 memavail=7289404 print_time=4793.712 buffer_time=2.128 print_stall=0 extruder: target=240 temp=239.9 pwm=0.497
Stats 799569.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9876732 bytes_read=2031485 bytes_retransmit=9 bytes_invalid=0 send_seq=188047 receive_seq=188047 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=1763924 sysload=0.21 cputime=273.231 memavail=7289404 print_time=4794.705 buffer_time=2.119 print_stall=0 extruder: target=240 temp=240.0 pwm=0.455
Stats 799570.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9877138 bytes_read=2031843 bytes_retransmit=9 bytes_invalid=0 send_seq=188063 receive_seq=188063 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=80 temp=80.0 pwm=0.358 sd_pos=1763981 sysload=0.21 cputime=273.290 memavail=7289184 print_time=4796.000 buffer_time=2.414 print_stall=0 extruder: target=240 temp=239.9 pwm=0.466
Stats 799571.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9877964 bytes_read=2032251 bytes_retransmit=9 bytes_invalid=0 send_seq=188086 receive_seq=188086 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992720 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1764093 sysload=0.28 cputime=273.348 memavail=7289184 print_time=4796.705 buffer_time=2.118 print_stall=0 extruder: target=240 temp=239.8 pwm=0.522
Stats 799572.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9881520 bytes_read=2032890 bytes_retransmit=9 bytes_invalid=0 send_seq=188156 receive_seq=188156 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992712 heater_bed: target=80 temp=80.0 pwm=0.337 sd_pos=1764598 sysload=0.28 cputime=273.420 memavail=7289184 print_time=4798.202 buffer_time=2.615 print_stall=0 extruder: target=240 temp=240.1 pwm=0.430
Stats 799573.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9883838 bytes_read=2033411 bytes_retransmit=9 bytes_invalid=0 send_seq=188203 receive_seq=188203 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992708 heater_bed: target=80 temp=80.0 pwm=0.335 sd_pos=1764851 sysload=0.28 cputime=273.472 memavail=7289184 print_time=4798.977 buffer_time=2.388 print_stall=0 extruder: target=240 temp=240.2 pwm=0.364
Stats 799574.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9886400 bytes_read=2033952 bytes_retransmit=9 bytes_invalid=0 send_seq=188254 receive_seq=188254 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=1765487 sysload=0.28 cputime=273.540 memavail=7289184 print_time=4799.803 buffer_time=2.214 print_stall=0 extruder: target=240 temp=239.9 pwm=0.432
Stats 799575.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9888998 bytes_read=2034509 bytes_retransmit=9 bytes_invalid=0 send_seq=188307 receive_seq=188307 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=1766098 sysload=0.28 cputime=273.601 memavail=7289184 print_time=4800.631 buffer_time=2.041 print_stall=0 extruder: target=240 temp=239.8 pwm=0.516
Stats 799576.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9892732 bytes_read=2035137 bytes_retransmit=9 bytes_invalid=0 send_seq=188377 receive_seq=188377 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=1766666 sysload=0.25 cputime=273.671 memavail=7289184 print_time=4801.890 buffer_time=2.299 print_stall=0 extruder: target=240 temp=240.2 pwm=0.348
Stats 799577.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9896155 bytes_read=2035760 bytes_retransmit=9 bytes_invalid=0 send_seq=188443 receive_seq=188443 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.400 sd_pos=1767151 sysload=0.25 cputime=273.745 memavail=7288896 print_time=4802.993 buffer_time=2.401 print_stall=0 extruder: target=240 temp=239.9 pwm=0.493
Stats 799578.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9898392 bytes_read=2036298 bytes_retransmit=9 bytes_invalid=0 send_seq=188489 receive_seq=188489 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.400 sd_pos=1767567 sysload=0.25 cputime=273.805 memavail=7288992 print_time=4803.707 buffer_time=2.114 print_stall=0 extruder: target=240 temp=239.8 pwm=0.505
Stats 799579.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9901640 bytes_read=2036886 bytes_retransmit=9 bytes_invalid=0 send_seq=188551 receive_seq=188551 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.0 pwm=0.400 sd_pos=1768615 sysload=0.25 cputime=273.875 memavail=7288996 print_time=4804.920 buffer_time=2.326 print_stall=0 extruder: target=240 temp=240.1 pwm=0.434
Stats 799580.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9902722 bytes_read=2037319 bytes_retransmit=9 bytes_invalid=0 send_seq=188579 receive_seq=188579 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=1768933 sysload=0.25 cputime=273.927 memavail=7288744 print_time=4805.870 buffer_time=2.275 print_stall=0 extruder: target=240 temp=239.8 pwm=0.490
Stats 799581.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9904847 bytes_read=2037841 bytes_retransmit=9 bytes_invalid=0 send_seq=188625 receive_seq=188625 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992723 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=1769354 sysload=0.23 cputime=273.988 memavail=7288744 print_time=4806.920 buffer_time=2.324 print_stall=0 extruder: target=240 temp=239.8 pwm=0.553
Stats 799582.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9906041 bytes_read=2038259 bytes_retransmit=9 bytes_invalid=0 send_seq=188653 receive_seq=188653 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992718 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=1769509 sysload=0.23 cputime=274.043 memavail=7288776 print_time=4807.925 buffer_time=2.329 print_stall=0 extruder: target=240 temp=240.1 pwm=0.360
Stats 799583.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9908232 bytes_read=2038807 bytes_retransmit=9 bytes_invalid=0 send_seq=188701 receive_seq=188701 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1769871 sysload=0.23 cputime=274.111 memavail=7288776 print_time=4808.759 buffer_time=2.162 print_stall=0 extruder: target=240 temp=240.2 pwm=0.380
Stats 799584.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9909689 bytes_read=2039264 bytes_retransmit=9 bytes_invalid=0 send_seq=188734 receive_seq=188734 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1770234 sysload=0.23 cputime=274.176 memavail=7288776 print_time=4810.064 buffer_time=2.466 print_stall=0 extruder: target=240 temp=239.9 pwm=0.488
Stats 799585.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9910663 bytes_read=2039667 bytes_retransmit=9 bytes_invalid=0 send_seq=188759 receive_seq=188759 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=80 temp=80.0 pwm=0.488 sd_pos=1770374 sysload=0.23 cputime=274.229 memavail=7288776 print_time=4810.670 buffer_time=2.072 print_stall=0 extruder: target=240 temp=240.2 pwm=0.385
Stats 799586.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9911887 bytes_read=2040110 bytes_retransmit=9 bytes_invalid=0 send_seq=188789 receive_seq=188789 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992728 heater_bed: target=80 temp=80.0 pwm=0.423 sd_pos=1770596 sysload=0.21 cputime=274.286 memavail=7288776 print_time=4811.817 buffer_time=2.218 print_stall=0 extruder: target=240 temp=239.9 pwm=0.524
Stats 799587.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=9913022 bytes_read=2040542 bytes_retransmit=9 bytes_invalid=0 send_seq=188817 receive_seq=188817 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.354 sd_pos=1770764 sysload=0.21 cputime=274.339 memavail=7288776 print_time=4812.902 buffer_time=2.302 print_stall=0 extruder: target=240 temp=240.1 pwm=0.346
Stats 799588.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9913603 bytes_read=2040925 bytes_retransmit=9 bytes_invalid=0 send_seq=188835 receive_seq=188835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992719 heater_bed: target=80 temp=80.0 pwm=0.529 sd_pos=1770764 sysload=0.21 cputime=274.391 memavail=7288776 print_time=4813.728 buffer_time=2.128 print_stall=0 extruder: target=240 temp=240.1 pwm=0.360
Stats 799589.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9914236 bytes_read=2041318 bytes_retransmit=9 bytes_invalid=0 send_seq=188855 receive_seq=188855 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=119992711 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=1770877 sysload=0.21 cputime=274.449 memavail=7288776 print_time=4814.978 buffer_time=2.378 print_stall=0 extruder: target=240 temp=240.1 pwm=0.396
Stats 799590.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9916538 bytes_read=2041840 bytes_retransmit=9 bytes_invalid=0 send_seq=188901 receive_seq=188901 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992704 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=1771234 sysload=0.21 cputime=274.515 memavail=7288528 print_time=4816.130 buffer_time=2.529 print_stall=0 extruder: target=240 temp=239.9 pwm=0.506
Stats 799591.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9918289 bytes_read=2042308 bytes_retransmit=9 bytes_invalid=0 send_seq=188939 receive_seq=188939 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992699 heater_bed: target=80 temp=80.0 pwm=0.385 sd_pos=1771435 sysload=0.20 cputime=274.568 memavail=7288528 print_time=4816.774 buffer_time=2.172 print_stall=0 extruder: target=240 temp=239.9 pwm=0.475
Stats 799592.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9921134 bytes_read=2042896 bytes_retransmit=9 bytes_invalid=0 send_seq=188995 receive_seq=188995 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992699 heater_bed: target=80 temp=80.0 pwm=0.514 sd_pos=1771853 sysload=0.20 cputime=274.638 memavail=7288528 print_time=4817.704 buffer_time=2.102 print_stall=0 extruder: target=240 temp=239.9 pwm=0.434
Stats 799593.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9924568 bytes_read=2043518 bytes_retransmit=9 bytes_invalid=0 send_seq=189061 receive_seq=189061 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992697 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=1772400 sysload=0.20 cputime=274.714 memavail=7288528 print_time=4818.804 buffer_time=2.201 print_stall=0 extruder: target=240 temp=239.9 pwm=0.419
Stats 799594.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9926842 bytes_read=2044021 bytes_retransmit=9 bytes_invalid=0 send_seq=189106 receive_seq=189106 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992692 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=1772991 sysload=0.20 cputime=274.783 memavail=7288528 print_time=4819.734 buffer_time=2.130 print_stall=0 extruder: target=240 temp=240.2 pwm=0.331
Stats 799595.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9930664 bytes_read=2044674 bytes_retransmit=9 bytes_invalid=0 send_seq=189178 receive_seq=189178 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992687 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=1773692 sysload=0.20 cputime=274.864 memavail=7291872 print_time=4821.098 buffer_time=2.494 print_stall=0 extruder: target=240 temp=240.0 pwm=0.490
Stats 799596.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9932413 bytes_read=2045156 bytes_retransmit=9 bytes_invalid=0 send_seq=189216 receive_seq=189216 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=1774051 sysload=0.34 cputime=274.925 memavail=7291872 print_time=4821.692 buffer_time=2.087 print_stall=0 extruder: target=240 temp=240.0 pwm=0.489
Stats 799597.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9935444 bytes_read=2045734 bytes_retransmit=9 bytes_invalid=0 send_seq=189276 receive_seq=189276 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=1775022 sysload=0.34 cputime=275.002 memavail=7291872 print_time=4822.678 buffer_time=2.072 print_stall=0 extruder: target=240 temp=240.1 pwm=0.458
Stats 799598.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9936885 bytes_read=2046203 bytes_retransmit=9 bytes_invalid=0 send_seq=189308 receive_seq=189308 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=1775393 sysload=0.34 cputime=275.067 memavail=7291872 print_time=4823.991 buffer_time=2.384 print_stall=0 extruder: target=240 temp=239.8 pwm=0.512
Stats 799599.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9938894 bytes_read=2046700 bytes_retransmit=9 bytes_invalid=0 send_seq=189349 receive_seq=189349 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992721 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=1775828 sysload=0.34 cputime=275.131 memavail=7291872 print_time=4825.046 buffer_time=2.439 print_stall=0 extruder: target=240 temp=240.4 pwm=0.271
Stats 799600.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9940071 bytes_read=2047113 bytes_retransmit=9 bytes_invalid=0 send_seq=189376 receive_seq=189376 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992715 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=1775993 sysload=0.34 cputime=275.186 memavail=7291116 print_time=4826.049 buffer_time=2.442 print_stall=0 extruder: target=240 temp=240.1 pwm=0.392
Stats 799601.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9942224 bytes_read=2047626 bytes_retransmit=9 bytes_invalid=0 send_seq=189420 receive_seq=189420 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992708 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=1776356 sysload=0.31 cputime=275.241 memavail=7291116 print_time=4826.885 buffer_time=2.276 print_stall=0 extruder: target=240 temp=240.1 pwm=0.444
Stats 799602.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=9943790 bytes_read=2048093 bytes_retransmit=9 bytes_invalid=0 send_seq=189455 receive_seq=189455 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992702 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=1776747 sysload=0.31 cputime=275.307 memavail=7291116 print_time=4828.228 buffer_time=2.619 print_stall=0 extruder: target=240 temp=240.0 pwm=0.490
Stats 799603.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9944632 bytes_read=2048496 bytes_retransmit=9 bytes_invalid=0 send_seq=189477 receive_seq=189477 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992695 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1776858 sysload=0.31 cputime=275.365 memavail=7291116 print_time=4828.785 buffer_time=2.175 print_stall=0 extruder: target=240 temp=239.8 pwm=0.499
Stats 799604.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9945864 bytes_read=2048939 bytes_retransmit=9 bytes_invalid=0 send_seq=189507 receive_seq=189507 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992688 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=1777078 sysload=0.31 cputime=275.431 memavail=7291116 print_time=4829.924 buffer_time=2.313 print_stall=0 extruder: target=240 temp=240.0 pwm=0.395
Stats 799605.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9947022 bytes_read=2049377 bytes_retransmit=9 bytes_invalid=0 send_seq=189534 receive_seq=189534 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992686 heater_bed: target=80 temp=80.0 pwm=0.488 sd_pos=1777244 sysload=0.31 cputime=275.494 memavail=7291116 print_time=4831.005 buffer_time=2.394 print_stall=0 extruder: target=240 temp=240.1 pwm=0.379
Stats 799606.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9947550 bytes_read=2049740 bytes_retransmit=9 bytes_invalid=0 send_seq=189551 receive_seq=189551 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992682 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=1777244 sysload=0.29 cputime=275.548 memavail=7290892 print_time=4831.827 buffer_time=2.215 print_stall=0 extruder: target=240 temp=240.1 pwm=0.446
Stats 799607.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=9947865 bytes_read=2050108 bytes_retransmit=9 bytes_invalid=0 send_seq=189566 receive_seq=189566 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992678 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=1777301 sysload=0.29 cputime=275.603 memavail=7290892 print_time=4832.630 buffer_time=2.017 print_stall=0 extruder: target=240 temp=240.2 pwm=0.360
Stats 799608.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=9950455 bytes_read=2050669 bytes_retransmit=9 bytes_invalid=0 send_seq=189618 receive_seq=189618 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992673 heater_bed: target=80 temp=80.0 pwm=0.355 sd_pos=1777712 sysload=0.29 cputime=275.680 memavail=7290892 print_time=4834.220 buffer_time=2.607 print_stall=0 extruder: target=240 temp=240.1 pwm=0.436
Stats 799609.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=9952156 bytes_read=2051125 bytes_retransmit=9 bytes_invalid=0 send_seq=189655 receive_seq=189655 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992668 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=1777916 sysload=0.29 cputime=275.748 memavail=7290892 print_time=4834.856 buffer_time=2.241 print_stall=0 extruder: target=240 temp=240.0 pwm=0.429
Stats 799610.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=9954805 bytes_read=2051639 bytes_retransmit=9 bytes_invalid=0 send_seq=189708 receive_seq=189700 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992665 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=1778362 sysload=0.29 cputime=275.812 memavail=7290672 print_time=4835.854 buffer_time=2.238 print_stall=0 extruder: target=240 temp=239.9 pwm=0.488
Stats 799611.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=9956818 bytes_read=2052176 bytes_retransmit=9 bytes_invalid=0 send_seq=189749 receive_seq=189749 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992660 heater_bed: target=80 temp=80.0 pwm=0.409 sd_pos=1778890 sysload=0.27 cputime=275.882 memavail=7290672 print_time=4836.687 buffer_time=2.071 print_stall=0 extruder: target=240 temp=239.9 pwm=0.431
Stats 799612.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=9960136 bytes_read=2052769 bytes_retransmit=9 bytes_invalid=0 send_seq=189812 receive_seq=189812 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992655 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=1779488 sysload=0.27 cputime=275.954 memavail=7290672 print_time=4837.806 buffer_time=2.189 print_stall=0 extruder: target=240 temp=240.0 pwm=0.372
Stats 799613.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9963581 bytes_read=2053403 bytes_retransmit=9 bytes_invalid=0 send_seq=189877 receive_seq=189877 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992653 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=1780111 sysload=0.27 cputime=276.030 memavail=7290672 print_time=4839.221 buffer_time=2.603 print_stall=0 extruder: target=240 temp=240.0 pwm=0.462
Stats 799614.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9965763 bytes_read=2053920 bytes_retransmit=9 bytes_invalid=0 send_seq=189922 receive_seq=189922 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992652 heater_bed: target=80 temp=80.0 pwm=0.400 sd_pos=1780613 sysload=0.27 cputime=276.095 memavail=7290672 print_time=4839.996 buffer_time=2.377 print_stall=0 extruder: target=240 temp=240.1 pwm=0.415
Stats 799615.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9968190 bytes_read=2054443 bytes_retransmit=9 bytes_invalid=0 send_seq=189971 receive_seq=189971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992648 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=1781495 sysload=0.27 cputime=276.157 memavail=7290672 print_time=4840.750 buffer_time=2.130 print_stall=0 extruder: target=240 temp=240.0 pwm=0.471
Stats 799616.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9969139 bytes_read=2054871 bytes_retransmit=9 bytes_invalid=0 send_seq=189998 receive_seq=189998 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992651 heater_bed: target=80 temp=80.0 pwm=0.396 sd_pos=1781606 sysload=0.24 cputime=276.211 memavail=7290672 print_time=4841.619 buffer_time=1.999 print_stall=0 extruder: target=240 temp=240.1 pwm=0.438
Stats 799617.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9971819 bytes_read=2055438 bytes_retransmit=9 bytes_invalid=0 send_seq=190053 receive_seq=190053 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992685 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=1782347 sysload=0.24 cputime=276.282 memavail=7290672 print_time=4843.152 buffer_time=2.532 print_stall=0 extruder: target=240 temp=239.9 pwm=0.520
Stats 799618.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9973079 bytes_read=2055887 bytes_retransmit=9 bytes_invalid=0 send_seq=190084 receive_seq=190084 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992685 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=1782531 sysload=0.24 cputime=276.371 memavail=7292384 print_time=4844.167 buffer_time=2.546 print_stall=0 extruder: target=240 temp=240.1 pwm=0.349
Stats 799619.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9975256 bytes_read=2056405 bytes_retransmit=9 bytes_invalid=0 send_seq=190129 receive_seq=190129 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992681 heater_bed: target=80 temp=80.0 pwm=0.469 sd_pos=1782894 sysload=0.24 cputime=276.416 memavail=7292160 print_time=4845.007 buffer_time=2.386 print_stall=0 extruder: target=240 temp=240.1 pwm=0.384
Stats 799620.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9976146 bytes_read=2056812 bytes_retransmit=9 bytes_invalid=0 send_seq=190152 receive_seq=190152 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992675 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=1783018 sysload=0.24 cputime=276.474 memavail=7291912 print_time=4845.686 buffer_time=2.064 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 799621.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9977691 bytes_read=2057265 bytes_retransmit=9 bytes_invalid=0 send_seq=190187 receive_seq=190187 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992669 heater_bed: target=80 temp=80.0 pwm=0.402 sd_pos=1783398 sysload=0.22 cputime=276.529 memavail=7291912 print_time=4846.914 buffer_time=2.292 print_stall=0 extruder: target=240 temp=240.1 pwm=0.416
Stats 799622.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=9978938 bytes_read=2057703 bytes_retransmit=9 bytes_invalid=0 send_seq=190216 receive_seq=190216 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992669 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=1783621 sysload=0.22 cputime=276.580 memavail=7291912 print_time=4848.055 buffer_time=2.432 print_stall=0 extruder: target=240 temp=240.2 pwm=0.365
Stats 799623.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9979721 bytes_read=2058115 bytes_retransmit=9 bytes_invalid=0 send_seq=190237 receive_seq=190237 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992667 heater_bed: target=80 temp=80.0 pwm=0.493 sd_pos=1783733 sysload=0.22 cputime=276.633 memavail=7291912 print_time=4848.705 buffer_time=2.082 print_stall=0 extruder: target=240 temp=240.0 pwm=0.456
Stats 799624.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9980596 bytes_read=2058503 bytes_retransmit=9 bytes_invalid=0 send_seq=190259 receive_seq=190259 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992663 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=1783789 sysload=0.22 cputime=276.695 memavail=7291912 print_time=4849.971 buffer_time=2.347 print_stall=0 extruder: target=240 temp=239.8 pwm=0.527
Stats 799625.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9980906 bytes_read=2058866 bytes_retransmit=9 bytes_invalid=0 send_seq=190273 receive_seq=190273 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992672 heater_bed: target=80 temp=80.0 pwm=0.476 sd_pos=1783846 sysload=0.22 cputime=276.760 memavail=7291652 print_time=4850.778 buffer_time=2.154 print_stall=0 extruder: target=240 temp=239.9 pwm=0.482
Stats 799626.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9983505 bytes_read=2059413 bytes_retransmit=9 bytes_invalid=0 send_seq=190324 receive_seq=190324 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992712 heater_bed: target=80 temp=80.0 pwm=0.381 sd_pos=1784280 sysload=0.29 cputime=276.835 memavail=7291652 print_time=4852.375 buffer_time=2.750 print_stall=0 extruder: target=240 temp=240.0 pwm=0.417
Stats 799627.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9985209 bytes_read=2059871 bytes_retransmit=9 bytes_invalid=0 send_seq=190360 receive_seq=190360 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992707 heater_bed: target=80 temp=80.0 pwm=0.433 sd_pos=1784482 sysload=0.29 cputime=276.895 memavail=7291652 print_time=4853.002 buffer_time=2.376 print_stall=0 extruder: target=240 temp=239.9 pwm=0.485
Stats 799628.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9987415 bytes_read=2060414 bytes_retransmit=9 bytes_invalid=0 send_seq=190407 receive_seq=190407 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992700 heater_bed: target=80 temp=80.0 pwm=0.388 sd_pos=1784705 sysload=0.29 cputime=276.964 memavail=7291652 print_time=4853.747 buffer_time=2.120 print_stall=0 extruder: target=240 temp=240.0 pwm=0.460
Stats 799629.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9989909 bytes_read=2060956 bytes_retransmit=9 bytes_invalid=0 send_seq=190457 receive_seq=190457 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992693 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=1785461 sysload=0.29 cputime=277.037 memavail=7291652 print_time=4854.821 buffer_time=2.193 print_stall=0 extruder: target=240 temp=240.2 pwm=0.434
Stats 799630.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9993386 bytes_read=2061564 bytes_retransmit=9 bytes_invalid=0 send_seq=190523 receive_seq=190523 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992686 heater_bed: target=80 temp=80.0 pwm=0.473 sd_pos=1786029 sysload=0.29 cputime=277.105 memavail=7291400 print_time=4855.917 buffer_time=2.290 print_stall=0 extruder: target=240 temp=240.4 pwm=0.287
Stats 799631.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9995387 bytes_read=2062067 bytes_retransmit=9 bytes_invalid=0 send_seq=190565 receive_seq=190565 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992687 heater_bed: target=80 temp=80.0 pwm=0.381 sd_pos=1786532 sysload=0.34 cputime=277.170 memavail=7291400 print_time=4856.708 buffer_time=2.079 print_stall=0 extruder: target=240 temp=240.1 pwm=0.448
Stats 799632.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=9998147 bytes_read=2062634 bytes_retransmit=9 bytes_invalid=0 send_seq=190620 receive_seq=190620 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992681 heater_bed: target=80 temp=80.0 pwm=0.381 sd_pos=1786901 sysload=0.34 cputime=277.236 memavail=7291400 print_time=4857.747 buffer_time=2.118 print_stall=0 extruder: target=240 temp=239.8 pwm=0.513
Stats 799633.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10001555 bytes_read=2063258 bytes_retransmit=9 bytes_invalid=0 send_seq=190686 receive_seq=190686 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992681 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1788037 sysload=0.34 cputime=277.314 memavail=7291400 print_time=4858.882 buffer_time=2.253 print_stall=0 extruder: target=240 temp=240.0 pwm=0.429
Stats 799634.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10002504 bytes_read=2063686 bytes_retransmit=9 bytes_invalid=0 send_seq=190713 receive_seq=190713 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992687 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=1788148 sysload=0.34 cputime=277.371 memavail=7291400 print_time=4859.755 buffer_time=2.124 print_stall=0 extruder: target=240 temp=240.1 pwm=0.424
Stats 799635.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10005142 bytes_read=2064238 bytes_retransmit=9 bytes_invalid=0 send_seq=190765 receive_seq=190765 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=1788887 sysload=0.34 cputime=277.442 memavail=7291400 print_time=4861.298 buffer_time=2.667 print_stall=0 extruder: target=240 temp=240.4 pwm=0.349
Stats 799636.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10005802 bytes_read=2064611 bytes_retransmit=9 bytes_invalid=0 send_seq=190784 receive_seq=190784 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992724 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=1788999 sysload=0.32 cputime=277.492 memavail=7291400 print_time=4861.674 buffer_time=2.042 print_stall=0 extruder: target=240 temp=239.8 pwm=0.595
Stats 799637.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10008366 bytes_read=2065164 bytes_retransmit=9 bytes_invalid=0 send_seq=190836 receive_seq=190836 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992716 heater_bed: target=80 temp=80.0 pwm=0.374 sd_pos=1789391 sysload=0.32 cputime=277.563 memavail=7290952 print_time=4863.133 buffer_time=2.501 print_stall=0 extruder: target=240 temp=240.1 pwm=0.488
Stats 799638.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10009542 bytes_read=2065621 bytes_retransmit=9 bytes_invalid=0 send_seq=190866 receive_seq=190866 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992710 heater_bed: target=80 temp=80.0 pwm=0.386 sd_pos=1789587 sysload=0.32 cputime=277.618 memavail=7290952 print_time=4864.090 buffer_time=2.457 print_stall=0 extruder: target=240 temp=239.8 pwm=0.499
Stats 799639.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10010630 bytes_read=2066034 bytes_retransmit=9 bytes_invalid=0 send_seq=190893 receive_seq=190893 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992705 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=1789911 sysload=0.32 cputime=277.673 memavail=7290728 print_time=4864.709 buffer_time=2.076 print_stall=0 extruder: target=240 temp=240.0 pwm=0.379
Stats 799640.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10012157 bytes_read=2066502 bytes_retransmit=9 bytes_invalid=0 send_seq=190928 receive_seq=190928 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992732 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=1790189 sysload=0.32 cputime=277.738 memavail=7290736 print_time=4866.198 buffer_time=2.564 print_stall=0 extruder: target=240 temp=240.0 pwm=0.411
Stats 799641.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10013037 bytes_read=2066914 bytes_retransmit=9 bytes_invalid=0 send_seq=190952 receive_seq=190952 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992724 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=1790299 sysload=0.29 cputime=277.799 memavail=7290736 print_time=4866.851 buffer_time=2.217 print_stall=0 extruder: target=240 temp=240.2 pwm=0.357
Stats 799642.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10013943 bytes_read=2067312 bytes_retransmit=9 bytes_invalid=0 send_seq=190976 receive_seq=190976 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992720 heater_bed: target=80 temp=80.0 pwm=0.524 sd_pos=1790355 sysload=0.29 cputime=277.853 memavail=7290736 print_time=4868.115 buffer_time=2.480 print_stall=0 extruder: target=240 temp=240.4 pwm=0.335
Stats 799643.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10014314 bytes_read=2067710 bytes_retransmit=9 bytes_invalid=0 send_seq=190994 receive_seq=190994 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992715 heater_bed: target=80 temp=80.0 pwm=0.363 sd_pos=1790412 sysload=0.29 cputime=277.903 memavail=7290736 print_time=4868.921 buffer_time=2.285 print_stall=0 extruder: target=240 temp=240.1 pwm=0.449
Stats 799644.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10015124 bytes_read=2068111 bytes_retransmit=9 bytes_invalid=0 send_seq=191017 receive_seq=191017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992712 heater_bed: target=80 temp=80.0 pwm=0.400 sd_pos=1790523 sysload=0.29 cputime=277.960 memavail=7290736 print_time=4869.659 buffer_time=2.022 print_stall=0 extruder: target=240 temp=240.0 pwm=0.472
Stats 799645.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10018629 bytes_read=2068712 bytes_retransmit=9 bytes_invalid=0 send_seq=191083 receive_seq=191083 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992708 heater_bed: target=80 temp=80.0 pwm=0.400 sd_pos=1791030 sysload=0.29 cputime=278.028 memavail=7290736 print_time=4871.136 buffer_time=2.499 print_stall=0 extruder: target=240 temp=240.0 pwm=0.420
Stats 799646.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10020838 bytes_read=2069236 bytes_retransmit=9 bytes_invalid=0 send_seq=191130 receive_seq=191130 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992701 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=1791254 sysload=0.27 cputime=278.092 memavail=7290736 print_time=4871.867 buffer_time=2.228 print_stall=0 extruder: target=240 temp=240.1 pwm=0.336
Stats 799647.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10023238 bytes_read=2069768 bytes_retransmit=9 bytes_invalid=0 send_seq=191178 receive_seq=191178 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992699 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=1791896 sysload=0.27 cputime=278.165 memavail=7290736 print_time=4872.943 buffer_time=2.304 print_stall=0 extruder: target=240 temp=239.9 pwm=0.478
Stats 799648.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10025773 bytes_read=2070311 bytes_retransmit=9 bytes_invalid=0 send_seq=191228 receive_seq=191228 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992692 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=1792272 sysload=0.27 cputime=278.224 memavail=7290736 print_time=4873.771 buffer_time=2.132 print_stall=0 extruder: target=240 temp=240.1 pwm=0.393
Stats 799649.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10028267 bytes_read=2070854 bytes_retransmit=9 bytes_invalid=0 send_seq=191278 receive_seq=191278 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992691 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=1792743 sysload=0.27 cputime=278.297 memavail=7290736 print_time=4874.702 buffer_time=2.062 print_stall=0 extruder: target=240 temp=239.9 pwm=0.499
Stats 799650.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10031399 bytes_read=2071451 bytes_retransmit=9 bytes_invalid=0 send_seq=191339 receive_seq=191339 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992692 heater_bed: target=80 temp=80.0 pwm=0.495 sd_pos=1793172 sysload=0.27 cputime=278.372 memavail=7290740 print_time=4875.878 buffer_time=2.237 print_stall=0 extruder: target=240 temp=240.0 pwm=0.416
Stats 799651.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10034702 bytes_read=2072044 bytes_retransmit=9 bytes_invalid=0 send_seq=191402 receive_seq=191402 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992691 heater_bed: target=80 temp=80.0 pwm=0.420 sd_pos=1794238 sysload=0.25 cputime=278.448 memavail=7290740 print_time=4877.008 buffer_time=2.367 print_stall=0 extruder: target=240 temp=240.1 pwm=0.336
Stats 799652.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10035663 bytes_read=2072467 bytes_retransmit=9 bytes_invalid=0 send_seq=191428 receive_seq=191428 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992689 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=1794347 sysload=0.25 cputime=278.506 memavail=7290740 print_time=4877.861 buffer_time=2.218 print_stall=0 extruder: target=240 temp=239.9 pwm=0.474
Stats 799653.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10038352 bytes_read=2073050 bytes_retransmit=9 bytes_invalid=0 send_seq=191483 receive_seq=191483 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992691 heater_bed: target=80 temp=80.0 pwm=0.386 sd_pos=1795082 sysload=0.25 cputime=278.573 memavail=7290740 print_time=4879.391 buffer_time=2.748 print_stall=0 extruder: target=240 temp=240.3 pwm=0.311
Stats 799654.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10039037 bytes_read=2073428 bytes_retransmit=9 bytes_invalid=0 send_seq=191503 receive_seq=191503 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992688 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=1795193 sysload=0.25 cputime=278.621 memavail=7289628 print_time=4879.755 buffer_time=2.112 print_stall=0 extruder: target=240 temp=239.9 pwm=0.552
Stats 799655.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10041689 bytes_read=2073986 bytes_retransmit=9 bytes_invalid=0 send_seq=191556 receive_seq=191556 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992685 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=1795623 sysload=0.25 cputime=278.688 memavail=7289708 print_time=4881.202 buffer_time=2.559 print_stall=0 extruder: target=240 temp=240.2 pwm=0.457
Stats 799656.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10043017 bytes_read=2074428 bytes_retransmit=9 bytes_invalid=0 send_seq=191586 receive_seq=191586 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992685 heater_bed: target=80 temp=80.0 pwm=0.392 sd_pos=1795863 sysload=0.23 cputime=278.742 memavail=7289484 print_time=4882.169 buffer_time=2.525 print_stall=0 extruder: target=240 temp=239.9 pwm=0.457
Stats 799657.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10044018 bytes_read=2074831 bytes_retransmit=9 bytes_invalid=0 send_seq=191611 receive_seq=191611 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992687 heater_bed: target=80 temp=80.0 pwm=0.392 sd_pos=1796170 sysload=0.23 cputime=278.794 memavail=7289484 print_time=4882.753 buffer_time=2.109 print_stall=0 extruder: target=240 temp=240.0 pwm=0.405
Stats 799658.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10044936 bytes_read=2075269 bytes_retransmit=9 bytes_invalid=0 send_seq=191637 receive_seq=191637 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992687 heater_bed: target=80 temp=80.0 pwm=0.331 sd_pos=1796281 sysload=0.23 cputime=278.848 memavail=7289484 print_time=4883.651 buffer_time=2.005 print_stall=0 extruder: target=240 temp=239.8 pwm=0.481
Stats 799659.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10046438 bytes_read=2075726 bytes_retransmit=9 bytes_invalid=0 send_seq=191670 receive_seq=191670 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992685 heater_bed: target=80 temp=80.0 pwm=0.382 sd_pos=1796578 sysload=0.23 cputime=278.903 memavail=7289484 print_time=4884.844 buffer_time=2.198 print_stall=0 extruder: target=240 temp=239.9 pwm=0.419
Stats 799660.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10047351 bytes_read=2076124 bytes_retransmit=9 bytes_invalid=0 send_seq=191694 receive_seq=191694 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992683 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=1796634 sysload=0.23 cputime=278.955 memavail=7288728 print_time=4886.073 buffer_time=2.426 print_stall=0 extruder: target=240 temp=239.9 pwm=0.419
Stats 799661.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10047685 bytes_read=2076492 bytes_retransmit=9 bytes_invalid=0 send_seq=191709 receive_seq=191709 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992686 heater_bed: target=80 temp=80.0 pwm=0.396 sd_pos=1796691 sysload=0.21 cputime=279.008 memavail=7288728 print_time=4886.856 buffer_time=2.207 print_stall=0 extruder: target=240 temp=240.0 pwm=0.446
Stats 799662.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10050184 bytes_read=2077029 bytes_retransmit=9 bytes_invalid=0 send_seq=191758 receive_seq=191758 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=119992707 heater_bed: target=80 temp=80.0 pwm=0.396 sd_pos=1797086 sysload=0.21 cputime=279.072 memavail=7288728 print_time=4888.401 buffer_time=2.752 print_stall=0 extruder: target=240 temp=240.1 pwm=0.374
Stats 799663.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=10052013 bytes_read=2077522 bytes_retransmit=9 bytes_invalid=0 send_seq=191798 receive_seq=191798 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992703 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=1797285 sysload=0.21 cputime=279.124 memavail=7288728 print_time=4889.000 buffer_time=2.350 print_stall=0 extruder: target=240 temp=240.1 pwm=0.390
Stats 799664.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=10054687 bytes_read=2078080 bytes_retransmit=9 bytes_invalid=0 send_seq=191851 receive_seq=191851 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992701 heater_bed: target=80 temp=80.0 pwm=0.347 sd_pos=1797681 sysload=0.21 cputime=279.193 memavail=7288728 print_time=4889.855 buffer_time=2.204 print_stall=0 extruder: target=240 temp=239.9 pwm=0.451
Stats 799665.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=10058476 bytes_read=2078727 bytes_retransmit=9 bytes_invalid=0 send_seq=191922 receive_seq=191922 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992696 heater_bed: target=80 temp=80.0 pwm=0.485 sd_pos=1798192 sysload=0.21 cputime=279.266 memavail=7288728 print_time=4891.160 buffer_time=2.509 print_stall=0 extruder: target=240 temp=239.8 pwm=0.571
Stats 799666.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=10059614 bytes_read=2079145 bytes_retransmit=9 bytes_invalid=0 send_seq=191950 receive_seq=191950 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992691 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=1798384 sysload=0.19 cputime=279.315 memavail=7288728 print_time=4891.698 buffer_time=2.046 print_stall=0 extruder: target=240 temp=240.0 pwm=0.444
Stats 799667.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=10061973 bytes_read=2079694 bytes_retransmit=9 bytes_invalid=0 send_seq=191999 receive_seq=191999 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992685 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=1798942 sysload=0.19 cputime=279.383 memavail=7288732 print_time=4892.654 buffer_time=2.002 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 799668.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10065654 bytes_read=2080352 bytes_retransmit=9 bytes_invalid=0 send_seq=192069 receive_seq=192069 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992682 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=1799560 sysload=0.19 cputime=279.465 memavail=7288732 print_time=4893.788 buffer_time=2.135 print_stall=0 extruder: target=240 temp=239.9 pwm=0.461
Stats 799669.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10068154 bytes_read=2080885 bytes_retransmit=9 bytes_invalid=0 send_seq=192120 receive_seq=192120 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992681 heater_bed: target=80 temp=80.0 pwm=0.406 sd_pos=1800324 sysload=0.19 cputime=279.538 memavail=7288508 print_time=4894.722 buffer_time=2.069 print_stall=0 extruder: target=240 temp=239.9 pwm=0.477
Stats 799670.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10070732 bytes_read=2081443 bytes_retransmit=9 bytes_invalid=0 send_seq=192173 receive_seq=192173 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992717 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=1800888 sysload=0.19 cputime=279.610 memavail=7288008 print_time=4896.041 buffer_time=2.387 print_stall=0 extruder: target=240 temp=240.1 pwm=0.396
Stats 799671.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10073445 bytes_read=2082005 bytes_retransmit=9 bytes_invalid=0 send_seq=192227 receive_seq=192227 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992713 heater_bed: target=80 temp=80.0 pwm=0.513 sd_pos=1801611 sysload=0.34 cputime=279.681 memavail=7288008 print_time=4897.529 buffer_time=2.875 print_stall=0 extruder: target=240 temp=240.2 pwm=0.383
Stats 799672.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10074122 bytes_read=2082388 bytes_retransmit=9 bytes_invalid=0 send_seq=192248 receive_seq=192248 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992709 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=1801722 sysload=0.34 cputime=279.743 memavail=7288008 print_time=4897.874 buffer_time=2.219 print_stall=0 extruder: target=240 temp=240.1 pwm=0.415
Stats 799673.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10076924 bytes_read=2082977 bytes_retransmit=9 bytes_invalid=0 send_seq=192304 receive_seq=192304 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992709 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=1802200 sysload=0.34 cputime=279.811 memavail=7288008 print_time=4899.301 buffer_time=2.646 print_stall=0 extruder: target=240 temp=240.0 pwm=0.493
Stats 799674.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10078207 bytes_read=2083419 bytes_retransmit=9 bytes_invalid=0 send_seq=192334 receive_seq=192334 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992705 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=1802394 sysload=0.34 cputime=279.885 memavail=7288008 print_time=4900.203 buffer_time=2.546 print_stall=0 extruder: target=240 temp=240.0 pwm=0.472
Stats 799675.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10079228 bytes_read=2083827 bytes_retransmit=9 bytes_invalid=0 send_seq=192360 receive_seq=192360 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992699 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=1802702 sysload=0.34 cputime=279.952 memavail=7288008 print_time=4900.739 buffer_time=2.082 print_stall=0 extruder: target=240 temp=239.7 pwm=0.579
Stats 799676.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10080756 bytes_read=2084309 bytes_retransmit=9 bytes_invalid=0 send_seq=192395 receive_seq=192395 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992697 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1802978 sysload=0.31 cputime=280.028 memavail=7288008 print_time=4902.093 buffer_time=2.432 print_stall=0 extruder: target=240 temp=239.9 pwm=0.487
Stats 799677.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10081597 bytes_read=2084702 bytes_retransmit=9 bytes_invalid=0 send_seq=192418 receive_seq=192418 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992697 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1803088 sysload=0.31 cputime=280.082 memavail=7288008 print_time=4902.704 buffer_time=2.043 print_stall=0 extruder: target=240 temp=239.8 pwm=0.537
Stats 799678.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=10082624 bytes_read=2085115 bytes_retransmit=9 bytes_invalid=0 send_seq=192442 receive_seq=192442 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992701 heater_bed: target=80 temp=80.0 pwm=0.456 sd_pos=1803173 sysload=0.31 cputime=280.149 memavail=7288008 print_time=4904.338 buffer_time=2.676 print_stall=0 extruder: target=240 temp=240.1 pwm=0.373
Stats 799679.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=10083260 bytes_read=2085530 bytes_retransmit=9 bytes_invalid=0 send_seq=192464 receive_seq=192464 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992754 heater_bed: target=80 temp=80.0 pwm=0.452 sd_pos=1803257 sysload=0.31 cputime=280.220 memavail=7288008 print_time=4904.993 buffer_time=2.330 print_stall=0 extruder: target=240 temp=240.0 pwm=0.482
Stats 799680.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=10085569 bytes_read=2086031 bytes_retransmit=9 bytes_invalid=0 send_seq=192510 receive_seq=192510 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.402 sd_pos=1803582 sysload=0.31 cputime=280.284 memavail=7288012 print_time=4906.076 buffer_time=2.411 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 799681.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=10088385 bytes_read=2086527 bytes_retransmit=9 bytes_invalid=0 send_seq=192567 receive_seq=192555 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=1048 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=80.0 pwm=0.402 sd_pos=1804088 sysload=0.28 cputime=280.354 memavail=7288012 print_time=4907.322 buffer_time=2.657 print_stall=0 extruder: target=240 temp=240.0 pwm=0.444
Stats 799682.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=10091086 bytes_read=2087167 bytes_retransmit=9 bytes_invalid=0 send_seq=192622 receive_seq=192622 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=1804504 sysload=0.28 cputime=280.426 memavail=7288012 print_time=4907.892 buffer_time=2.227 print_stall=0 extruder: target=240 temp=239.9 pwm=0.475
Stats 799683.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10093611 bytes_read=2087710 bytes_retransmit=9 bytes_invalid=0 send_seq=192672 receive_seq=192672 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.509 sd_pos=1804871 sysload=0.28 cputime=280.488 memavail=7288012 print_time=4908.792 buffer_time=2.125 print_stall=0 extruder: target=240 temp=239.8 pwm=0.501
Stats 799684.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10097060 bytes_read=2088318 bytes_retransmit=9 bytes_invalid=0 send_seq=192738 receive_seq=192738 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=1805610 sysload=0.28 cputime=280.572 memavail=7287660 print_time=4909.922 buffer_time=2.255 print_stall=0 extruder: target=240 temp=239.9 pwm=0.479
Stats 799685.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10100210 bytes_read=2088915 bytes_retransmit=9 bytes_invalid=0 send_seq=192796 receive_seq=192796 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992729 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=1806296 sysload=0.28 cputime=280.635 memavail=7286732 print_time=4910.978 buffer_time=2.310 print_stall=0 extruder: target=240 temp=240.0 pwm=0.421
Stats 799686.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10102851 bytes_read=2089448 bytes_retransmit=9 bytes_invalid=0 send_seq=192847 receive_seq=192847 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992721 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=1806661 sysload=0.26 cputime=280.692 memavail=7286732 print_time=4911.934 buffer_time=2.265 print_stall=0 extruder: target=240 temp=240.0 pwm=0.427
Stats 799687.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10105361 bytes_read=2089981 bytes_retransmit=9 bytes_invalid=0 send_seq=192898 receive_seq=192898 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=3 upcoming_bytes=0 freq=119992716 heater_bed: target=80 temp=80.0 pwm=0.368 sd_pos=1807301 sysload=0.26 cputime=280.764 memavail=7286732 print_time=4912.807 buffer_time=2.138 print_stall=0 extruder: target=240 temp=240.2 pwm=0.354
Stats 799688.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10108625 bytes_read=2090619 bytes_retransmit=9 bytes_invalid=0 send_seq=192961 receive_seq=192961 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.402 sd_pos=1808208 sysload=0.26 cputime=280.825 memavail=7286732 print_time=4914.094 buffer_time=2.425 print_stall=0 extruder: target=240 temp=240.4 pwm=0.334
Stats 799689.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10110022 bytes_read=2091052 bytes_retransmit=9 bytes_invalid=0 send_seq=192992 receive_seq=192992 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=1808445 sysload=0.26 cputime=280.882 memavail=7286732 print_time=4915.031 buffer_time=2.361 print_stall=0 extruder: target=240 temp=239.8 pwm=0.596
Stats 799690.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10112558 bytes_read=2091590 bytes_retransmit=9 bytes_invalid=0 send_seq=193044 receive_seq=193044 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.461 sd_pos=1809052 sysload=0.26 cputime=280.958 memavail=7286508 print_time=4916.449 buffer_time=2.777 print_stall=0 extruder: target=240 temp=239.8 pwm=0.546
Stats 799691.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10113612 bytes_read=2092037 bytes_retransmit=9 bytes_invalid=0 send_seq=193072 receive_seq=193072 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.520 sd_pos=1809334 sysload=0.24 cputime=281.023 memavail=7286508 print_time=4916.880 buffer_time=2.209 print_stall=0 extruder: target=240 temp=239.7 pwm=0.586
Stats 799692.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10116429 bytes_read=2092585 bytes_retransmit=9 bytes_invalid=0 send_seq=193126 receive_seq=193126 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.520 sd_pos=1809820 sysload=0.24 cputime=281.085 memavail=7286508 print_time=4918.322 buffer_time=2.651 print_stall=0 extruder: target=240 temp=239.8 pwm=0.469
Stats 799693.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10117735 bytes_read=2093039 bytes_retransmit=9 bytes_invalid=0 send_seq=193158 receive_seq=193158 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992729 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=1810015 sysload=0.24 cputime=281.145 memavail=7286508 print_time=4919.242 buffer_time=2.570 print_stall=0 extruder: target=240 temp=240.4 pwm=0.217
Stats 799694.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10118766 bytes_read=2093481 bytes_retransmit=9 bytes_invalid=0 send_seq=193185 receive_seq=193185 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119992723 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=1810379 sysload=0.24 cputime=281.208 memavail=7286508 print_time=4919.771 buffer_time=2.098 print_stall=0 extruder: target=240 temp=240.4 pwm=0.315
Stats 799695.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10120508 bytes_read=2093944 bytes_retransmit=9 bytes_invalid=0 send_seq=193222 receive_seq=193222 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=119992723 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=1810685 sysload=0.24 cputime=281.275 memavail=7288304 print_time=4921.107 buffer_time=2.435 print_stall=0 extruder: target=240 temp=240.4 pwm=0.339
Stats 799696.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10121493 bytes_read=2094347 bytes_retransmit=9 bytes_invalid=0 send_seq=193247 receive_seq=193247 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992717 heater_bed: target=80 temp=80.0 pwm=0.413 sd_pos=1810820 sysload=0.30 cputime=281.347 memavail=7282788 print_time=4921.728 buffer_time=2.054 print_stall=0 extruder: target=240 temp=240.4 pwm=0.292
Stats 799697.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10122520 bytes_read=2094779 bytes_retransmit=9 bytes_invalid=0 send_seq=193272 receive_seq=193272 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992786 heater_bed: target=80 temp=80.0 pwm=0.468 sd_pos=1810905 sysload=0.30 cputime=281.408 memavail=7281528 print_time=4923.366 buffer_time=2.692 print_stall=0 extruder: target=240 temp=239.8 pwm=0.567
Stats 799698.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10123089 bytes_read=2095167 bytes_retransmit=9 bytes_invalid=0 send_seq=193291 receive_seq=193291 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.447 sd_pos=1810989 sysload=0.30 cputime=281.449 memavail=7287284 print_time=4924.022 buffer_time=2.348 print_stall=0 extruder: target=240 temp=240.0 pwm=0.446
Stats 799699.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10125545 bytes_read=2095690 bytes_retransmit=9 bytes_invalid=0 send_seq=193340 receive_seq=193340 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=1811344 sysload=0.30 cputime=281.501 memavail=7287156 print_time=4925.111 buffer_time=2.435 print_stall=0 extruder: target=240 temp=239.8 pwm=0.497
Stats 799700.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10127856 bytes_read=2096237 bytes_retransmit=9 bytes_invalid=0 send_seq=193388 receive_seq=193388 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=80.0 pwm=0.366 sd_pos=1811598 sysload=0.30 cputime=281.552 memavail=7285660 print_time=4925.843 buffer_time=2.167 print_stall=0 extruder: target=240 temp=240.1 pwm=0.328
Stats 799701.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10131021 bytes_read=2096820 bytes_retransmit=9 bytes_invalid=0 send_seq=193449 receive_seq=193449 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.0 pwm=0.381 sd_pos=1812067 sysload=0.36 cputime=281.620 memavail=7285412 print_time=4926.891 buffer_time=2.215 print_stall=0 extruder: target=240 temp=240.1 pwm=0.417
Stats 799702.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10133959 bytes_read=2097383 bytes_retransmit=9 bytes_invalid=0 send_seq=193506 receive_seq=193506 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=1812709 sysload=0.36 cputime=281.692 memavail=7285412 print_time=4927.832 buffer_time=2.155 print_stall=0 extruder: target=240 temp=240.0 pwm=0.417
Stats 799703.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10137282 bytes_read=2097981 bytes_retransmit=9 bytes_invalid=0 send_seq=193572 receive_seq=193561 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=1813428 sysload=0.36 cputime=281.763 memavail=7286436 print_time=4928.935 buffer_time=2.256 print_stall=0 extruder: target=240 temp=240.0 pwm=0.481
Stats 799704.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10139696 bytes_read=2098559 bytes_retransmit=9 bytes_invalid=0 send_seq=193621 receive_seq=193621 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=1814094 sysload=0.36 cputime=281.818 memavail=7285428 print_time=4929.824 buffer_time=2.145 print_stall=0 extruder: target=240 temp=239.8 pwm=0.481
Stats 799705.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10142425 bytes_read=2099122 bytes_retransmit=9 bytes_invalid=0 send_seq=193675 receive_seq=193675 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119992763 heater_bed: target=80 temp=80.0 pwm=0.346 sd_pos=1814562 sysload=0.36 cputime=281.879 memavail=7284420 print_time=4930.730 buffer_time=2.050 print_stall=0 extruder: target=240 temp=240.0 pwm=0.423
Stats 799706.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10146113 bytes_read=2099764 bytes_retransmit=9 bytes_invalid=0 send_seq=193745 receive_seq=193745 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=1815043 sysload=0.49 cputime=281.950 memavail=7284420 print_time=4931.876 buffer_time=2.196 print_stall=0 extruder: target=240 temp=240.1 pwm=0.441
Stats 799707.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10148955 bytes_read=2100317 bytes_retransmit=9 bytes_invalid=0 send_seq=193800 receive_seq=193800 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.466 sd_pos=1815921 sysload=0.49 cputime=282.023 memavail=7284424 print_time=4932.844 buffer_time=2.163 print_stall=0 extruder: target=240 temp=240.1 pwm=0.382
Stats 799708.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10151607 bytes_read=2100891 bytes_retransmit=9 bytes_invalid=0 send_seq=193853 receive_seq=193853 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=1816571 sysload=0.49 cputime=282.099 memavail=7283920 print_time=4934.139 buffer_time=2.457 print_stall=0 extruder: target=240 temp=240.0 pwm=0.427
Stats 799709.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10153341 bytes_read=2101368 bytes_retransmit=9 bytes_invalid=0 send_seq=193890 receive_seq=193890 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=1817139 sysload=0.49 cputime=282.157 memavail=7283920 print_time=4935.211 buffer_time=2.529 print_stall=0 extruder: target=240 temp=240.0 pwm=0.439
Stats 799710.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10155146 bytes_read=2101836 bytes_retransmit=9 bytes_invalid=0 send_seq=193928 receive_seq=193928 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=1817421 sysload=0.49 cputime=282.212 memavail=7287608 print_time=4935.692 buffer_time=2.009 print_stall=0 extruder: target=240 temp=240.0 pwm=0.443
Stats 799711.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10158086 bytes_read=2102414 bytes_retransmit=9 bytes_invalid=0 send_seq=193985 receive_seq=193985 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=1818025 sysload=0.45 cputime=282.288 memavail=7287292 print_time=4937.261 buffer_time=2.577 print_stall=0 extruder: target=240 temp=240.0 pwm=0.443
Stats 799712.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10159539 bytes_read=2102876 bytes_retransmit=9 bytes_invalid=0 send_seq=194019 receive_seq=194019 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1818177 sysload=0.45 cputime=282.344 memavail=7287040 print_time=4938.170 buffer_time=2.486 print_stall=0 extruder: target=240 temp=239.8 pwm=0.534
Stats 799713.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10161086 bytes_read=2103345 bytes_retransmit=9 bytes_invalid=0 send_seq=194054 receive_seq=194054 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.410 sd_pos=1818651 sysload=0.45 cputime=282.394 memavail=7286816 print_time=4938.914 buffer_time=2.230 print_stall=0 extruder: target=240 temp=239.9 pwm=0.495
Stats 799714.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10162790 bytes_read=2103833 bytes_retransmit=9 bytes_invalid=0 send_seq=194093 receive_seq=194093 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992732 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=1818982 sysload=0.45 cputime=282.461 memavail=7285760 print_time=4939.920 buffer_time=2.236 print_stall=0 extruder: target=240 temp=239.9 pwm=0.448
Stats 799715.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10163992 bytes_read=2104268 bytes_retransmit=9 bytes_invalid=0 send_seq=194122 receive_seq=194122 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=1819148 sysload=0.45 cputime=282.513 memavail=7285852 print_time=4940.820 buffer_time=2.134 print_stall=0 extruder: target=240 temp=240.2 pwm=0.346
Stats 799716.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10164718 bytes_read=2104639 bytes_retransmit=9 bytes_invalid=0 send_seq=194142 receive_seq=194142 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=1819205 sysload=0.41 cputime=282.573 memavail=7285852 print_time=4942.148 buffer_time=2.462 print_stall=0 extruder: target=240 temp=240.4 pwm=0.279
Stats 799717.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10165706 bytes_read=2105060 bytes_retransmit=9 bytes_invalid=0 send_seq=194169 receive_seq=194169 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1819344 sysload=0.41 cputime=282.628 memavail=7285628 print_time=4942.831 buffer_time=2.144 print_stall=0 extruder: target=240 temp=240.2 pwm=0.388
Stats 799718.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10170171 bytes_read=2105786 bytes_retransmit=9 bytes_invalid=0 send_seq=194253 receive_seq=194253 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.0 pwm=0.339 sd_pos=1819942 sysload=0.41 cputime=282.706 memavail=7285404 print_time=4944.326 buffer_time=2.639 print_stall=0 extruder: target=240 temp=240.0 pwm=0.479
Stats 799719.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10172127 bytes_read=2106269 bytes_retransmit=9 bytes_invalid=0 send_seq=194294 receive_seq=194294 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.403 sd_pos=1820209 sysload=0.41 cputime=282.750 memavail=7289076 print_time=4944.778 buffer_time=2.091 print_stall=0 extruder: target=240 temp=239.7 pwm=0.576
Stats 799720.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10176250 bytes_read=2106947 bytes_retransmit=9 bytes_invalid=0 send_seq=194371 receive_seq=194371 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.394 sd_pos=1821450 sysload=0.41 cputime=282.827 memavail=7287372 print_time=4945.958 buffer_time=2.270 print_stall=0 extruder: target=240 temp=240.0 pwm=0.415
Stats 799721.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10179326 bytes_read=2107529 bytes_retransmit=9 bytes_invalid=0 send_seq=194429 receive_seq=194429 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.0 pwm=0.376 sd_pos=1822822 sysload=0.38 cputime=282.909 memavail=7287372 print_time=4946.806 buffer_time=2.118 print_stall=0 extruder: target=240 temp=240.3 pwm=0.281
Stats 799722.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=10183153 bytes_read=2108167 bytes_retransmit=9 bytes_invalid=0 send_seq=194501 receive_seq=194501 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.442 sd_pos=1823932 sysload=0.38 cputime=282.980 memavail=7287372 print_time=4948.085 buffer_time=2.396 print_stall=0 extruder: target=240 temp=240.2 pwm=0.398
Stats 799723.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10186077 bytes_read=2108761 bytes_retransmit=9 bytes_invalid=0 send_seq=194558 receive_seq=194558 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.449 sd_pos=1824629 sysload=0.38 cputime=283.045 memavail=7287132 print_time=4948.996 buffer_time=2.307 print_stall=0 extruder: target=240 temp=239.8 pwm=0.569
Stats 799724.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10189259 bytes_read=2109358 bytes_retransmit=9 bytes_invalid=0 send_seq=194619 receive_seq=194619 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.371 sd_pos=1825645 sysload=0.38 cputime=283.115 memavail=7286892 print_time=4949.825 buffer_time=2.135 print_stall=0 extruder: target=240 temp=240.1 pwm=0.466
Stats 799725.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10192467 bytes_read=2109946 bytes_retransmit=9 bytes_invalid=0 send_seq=194681 receive_seq=194681 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=80 temp=80.0 pwm=0.462 sd_pos=1827083 sysload=0.38 cputime=283.177 memavail=7286640 print_time=4950.694 buffer_time=2.004 print_stall=0 extruder: target=240 temp=240.1 pwm=0.466
Stats 799726.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10196343 bytes_read=2110609 bytes_retransmit=9 bytes_invalid=0 send_seq=194755 receive_seq=194755 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=1828236 sysload=0.35 cputime=283.263 memavail=7286640 print_time=4951.815 buffer_time=2.125 print_stall=0 extruder: target=240 temp=240.0 pwm=0.422
Stats 799727.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10200022 bytes_read=2111251 bytes_retransmit=9 bytes_invalid=0 send_seq=194825 receive_seq=194825 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.435 sd_pos=1829208 sysload=0.35 cputime=283.340 memavail=7286400 print_time=4952.910 buffer_time=2.218 print_stall=0 extruder: target=240 temp=239.8 pwm=0.546
Stats 799728.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10202045 bytes_read=2111755 bytes_retransmit=9 bytes_invalid=0 send_seq=194867 receive_seq=194867 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992732 heater_bed: target=80 temp=80.0 pwm=0.428 sd_pos=1829751 sysload=0.35 cputime=283.408 memavail=7286404 print_time=4953.835 buffer_time=2.142 print_stall=0 extruder: target=240 temp=240.3 pwm=0.317
Stats 799729.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10204380 bytes_read=2112304 bytes_retransmit=9 bytes_invalid=0 send_seq=194916 receive_seq=194916 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=30 freq=119992716 heater_bed: target=80 temp=80.0 pwm=0.505 sd_pos=1830484 sysload=0.35 cputime=283.483 memavail=7286404 print_time=4954.937 buffer_time=2.244 print_stall=0 extruder: target=240 temp=240.3 pwm=0.352
Stats 799730.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10205617 bytes_read=2112741 bytes_retransmit=9 bytes_invalid=0 send_seq=194945 receive_seq=194945 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=30 freq=119992709 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=1830567 sysload=0.35 cputime=283.543 memavail=7285648 print_time=4955.979 buffer_time=2.285 print_stall=0 extruder: target=240 temp=240.0 pwm=0.503
Stats 799731.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10205960 bytes_read=2113094 bytes_retransmit=9 bytes_invalid=0 send_seq=194960 receive_seq=194960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992705 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=1830705 sysload=0.32 cputime=283.604 memavail=7284640 print_time=4956.841 buffer_time=2.146 print_stall=0 extruder: target=240 temp=240.1 pwm=0.459
Stats 799732.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10207662 bytes_read=2113582 bytes_retransmit=9 bytes_invalid=0 send_seq=194999 receive_seq=194999 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992712 heater_bed: target=80 temp=80.0 pwm=0.379 sd_pos=1831067 sysload=0.32 cputime=283.688 memavail=7284640 print_time=4957.735 buffer_time=2.040 print_stall=0 extruder: target=240 temp=239.9 pwm=0.527
Stats 799733.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=10210416 bytes_read=2114154 bytes_retransmit=9 bytes_invalid=0 send_seq=195052 receive_seq=195052 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=30 freq=119992782 heater_bed: target=80 temp=80.0 pwm=0.379 sd_pos=1831899 sysload=0.32 cputime=283.762 memavail=7284640 print_time=4958.932 buffer_time=2.236 print_stall=0 extruder: target=240 temp=239.6 pwm=0.618
Stats 799734.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=10211919 bytes_read=2114602 bytes_retransmit=9 bytes_invalid=0 send_seq=195086 receive_seq=195086 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=30 freq=119992815 heater_bed: target=80 temp=80.0 pwm=0.389 sd_pos=1832066 sysload=0.32 cputime=283.822 memavail=7284640 print_time=4959.817 buffer_time=2.120 print_stall=0 extruder: target=240 temp=239.9 pwm=0.454
Stats 799735.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=10212572 bytes_read=2115005 bytes_retransmit=9 bytes_invalid=0 send_seq=195108 receive_seq=195108 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.360 sd_pos=1832160 sysload=0.32 cputime=283.888 memavail=7284388 print_time=4960.959 buffer_time=2.262 print_stall=0 extruder: target=240 temp=240.1 pwm=0.392
Stats 799736.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=10215678 bytes_read=2115597 bytes_retransmit=9 bytes_invalid=0 send_seq=195168 receive_seq=195168 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.443 sd_pos=1832727 sysload=0.29 cputime=283.963 memavail=7284388 print_time=4961.771 buffer_time=2.073 print_stall=0 extruder: target=240 temp=240.0 pwm=0.456
Stats 799737.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=10219760 bytes_read=2116260 bytes_retransmit=9 bytes_invalid=0 send_seq=195245 receive_seq=195245 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=1833372 sysload=0.29 cputime=284.056 memavail=7284388 print_time=4962.781 buffer_time=2.082 print_stall=0 extruder: target=240 temp=240.0 pwm=0.481
Stats 799738.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10223645 bytes_read=2116929 bytes_retransmit=9 bytes_invalid=0 send_seq=195317 receive_seq=195317 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.465 sd_pos=1834077 sysload=0.29 cputime=284.136 memavail=7278592 print_time=4963.810 buffer_time=2.109 print_stall=0 extruder: target=240 temp=239.9 pwm=0.483
Stats 799739.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10227487 bytes_read=2117581 bytes_retransmit=9 bytes_invalid=0 send_seq=195389 receive_seq=195389 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992753 heater_bed: target=80 temp=80.0 pwm=0.396 sd_pos=1834879 sysload=0.29 cputime=284.218 memavail=7284600 print_time=4964.831 buffer_time=2.129 print_stall=0 extruder: target=240 temp=239.9 pwm=0.420
Stats 799740.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10231318 bytes_read=2118214 bytes_retransmit=9 bytes_invalid=0 send_seq=195460 receive_seq=195460 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=80 temp=80.0 pwm=0.408 sd_pos=1835527 sysload=0.29 cputime=284.272 memavail=7283900 print_time=4965.891 buffer_time=2.189 print_stall=0 extruder: target=240 temp=239.9 pwm=0.477
Stats 799741.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10234812 bytes_read=2118837 bytes_retransmit=9 bytes_invalid=0 send_seq=195526 receive_seq=195526 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992814 heater_bed: target=80 temp=80.0 pwm=0.447 sd_pos=1836188 sysload=0.27 cputime=284.351 memavail=7283900 print_time=4966.797 buffer_time=2.094 print_stall=0 extruder: target=240 temp=240.1 pwm=0.403
Stats 799742.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10238615 bytes_read=2119484 bytes_retransmit=9 bytes_invalid=0 send_seq=195597 receive_seq=195597 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992800 heater_bed: target=80 temp=80.0 pwm=0.359 sd_pos=1836918 sysload=0.27 cputime=284.401 memavail=7283900 print_time=4967.792 buffer_time=2.088 print_stall=0 extruder: target=240 temp=240.0 pwm=0.484
Stats 799743.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=10242582 bytes_read=2120143 bytes_retransmit=9 bytes_invalid=0 send_seq=195670 receive_seq=195670 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1837673 sysload=0.27 cputime=284.453 memavail=7284052 print_time=4968.818 buffer_time=2.113 print_stall=0 extruder: target=240 temp=240.0 pwm=0.484
Stats 799744.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=10245523 bytes_read=2120721 bytes_retransmit=9 bytes_invalid=0 send_seq=195727 receive_seq=195727 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992776 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1838121 sysload=0.27 cputime=284.525 memavail=7283680 print_time=4969.658 buffer_time=1.952 print_stall=0 extruder: target=240 temp=239.8 pwm=0.484
Stats 799745.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=10249566 bytes_read=2121393 bytes_retransmit=9 bytes_invalid=0 send_seq=195803 receive_seq=195803 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=20 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=1838545 sysload=0.27 cputime=284.588 memavail=7286144 print_time=4970.756 buffer_time=2.049 print_stall=0 extruder: target=240 temp=239.9 pwm=0.500
Stats 799746.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=10252918 bytes_read=2121991 bytes_retransmit=9 bytes_invalid=0 send_seq=195867 receive_seq=195867 retransmit_seq=17 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=30 freq=119992870 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=1838875 sysload=0.25 cputime=284.662 memavail=7286144 print_time=4971.727 buffer_time=2.019 print_stall=0 extruder: target=240 temp=239.8 pwm=0.509
Stats 799747.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=10258005 bytes_read=2122749 bytes_retransmit=9 bytes_invalid=0 send_seq=195960 receive_seq=195960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=40 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=1839840 sysload=0.25 cputime=284.712 memavail=7285656 print_time=4972.990 buffer_time=2.282 print_stall=0 extruder: target=240 temp=240.2 pwm=0.363
Stats 799748.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=10260594 bytes_read=2123312 bytes_retransmit=9 bytes_invalid=0 send_seq=196011 receive_seq=196011 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=60 freq=119992833 heater_bed: target=80 temp=80.0 pwm=0.474 sd_pos=1840683 sysload=0.25 cputime=284.766 memavail=7285656 print_time=4974.145 buffer_time=2.436 print_stall=0 extruder: target=240 temp=240.4 pwm=0.368
Stats 799749.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=10262353 bytes_read=2123790 bytes_retransmit=9 bytes_invalid=0 send_seq=196051 receive_seq=196051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=30 freq=119992814 heater_bed: target=80 temp=80.0 pwm=0.508 sd_pos=1840795 sysload=0.25 cputime=284.808 memavail=7285656 print_time=4974.992 buffer_time=2.281 print_stall=0 extruder: target=240 temp=240.1 pwm=0.448
Stats 799750.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=10263742 bytes_read=2124248 bytes_retransmit=9 bytes_invalid=0 send_seq=196084 receive_seq=196084 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=10 freq=119992799 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=1841158 sysload=0.25 cputime=284.858 memavail=7285660 print_time=4976.185 buffer_time=2.474 print_stall=0 extruder: target=240 temp=240.0 pwm=0.444
Stats 799751.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=10265548 bytes_read=2124731 bytes_retransmit=9 bytes_invalid=0 send_seq=196123 receive_seq=196123 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=30 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.412 sd_pos=1841881 sysload=0.23 cputime=284.929 memavail=7285412 print_time=4976.833 buffer_time=2.121 print_stall=0 extruder: target=240 temp=239.8 pwm=0.503
Stats 799752.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=10268888 bytes_read=2125322 bytes_retransmit=9 bytes_invalid=0 send_seq=196187 receive_seq=196187 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=30 freq=119992781 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1842315 sysload=0.23 cputime=284.998 memavail=7285412 print_time=4978.752 buffer_time=3.039 print_stall=0 extruder: target=240 temp=239.8 pwm=0.503
Stats 799753.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10269086 bytes_read=2125690 bytes_retransmit=9 bytes_invalid=0 send_seq=196200 receive_seq=196200 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992771 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1842315 sysload=0.23 cputime=285.049 memavail=7287056 print_time=4978.752 buffer_time=2.039 print_stall=0 extruder: target=240 temp=239.8 pwm=0.503
Stats 799754.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10272682 bytes_read=2126317 bytes_retransmit=9 bytes_invalid=0 send_seq=196267 receive_seq=196267 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1842869 sysload=0.23 cputime=285.114 memavail=7286568 print_time=4979.976 buffer_time=2.262 print_stall=0 extruder: target=240 temp=240.0 pwm=0.435
Stats 799755.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10275506 bytes_read=2126870 bytes_retransmit=9 bytes_invalid=0 send_seq=196322 receive_seq=196322 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=119992808 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1843383 sysload=0.23 cputime=285.177 memavail=7286568 print_time=4980.855 buffer_time=2.140 print_stall=0 extruder: target=240 temp=240.0 pwm=0.435
Stats 799756.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10278941 bytes_read=2127498 bytes_retransmit=9 bytes_invalid=0 send_seq=196389 receive_seq=196389 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992793 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=1843784 sysload=0.21 cputime=285.247 memavail=7286344 print_time=4981.935 buffer_time=2.220 print_stall=0 extruder: target=240 temp=240.1 pwm=0.374
Stats 799757.3: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10283527 bytes_read=2128215 bytes_retransmit=9 bytes_invalid=0 send_seq=196474 receive_seq=196474 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.0 pwm=0.360 sd_pos=1844666 sysload=0.21 cputime=285.323 memavail=7285896 print_time=4982.853 buffer_time=2.137 print_stall=0 extruder: target=240 temp=239.9 pwm=0.500
Stats 799758.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10287336 bytes_read=2128859 bytes_retransmit=9 bytes_invalid=0 send_seq=196544 receive_seq=196544 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=0 freq=119992766 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=1845197 sysload=0.21 cputime=285.400 memavail=7285644 print_time=4983.760 buffer_time=2.045 print_stall=0 extruder: target=240 temp=239.9 pwm=0.490
Stats 799759.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10290873 bytes_read=2129487 bytes_retransmit=9 bytes_invalid=0 send_seq=196611 receive_seq=196611 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=119992803 heater_bed: target=80 temp=80.0 pwm=0.478 sd_pos=1845657 sysload=0.21 cputime=285.475 memavail=7285648 print_time=4985.075 buffer_time=2.358 print_stall=0 extruder: target=240 temp=239.9 pwm=0.489
Stats 799760.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10294983 bytes_read=2130169 bytes_retransmit=9 bytes_invalid=0 send_seq=196689 receive_seq=196689 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=1846544 sysload=0.21 cputime=285.543 memavail=7284892 print_time=4986.130 buffer_time=2.413 print_stall=0 extruder: target=240 temp=240.2 pwm=0.357
Stats 799761.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10297445 bytes_read=2130687 bytes_retransmit=9 bytes_invalid=0 send_seq=196737 receive_seq=196737 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=80 temp=80.0 pwm=0.472 sd_pos=1846897 sysload=0.19 cputime=285.601 memavail=7284892 print_time=4986.751 buffer_time=2.033 print_stall=0 extruder: target=240 temp=240.1 pwm=0.457
Stats 799762.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10300003 bytes_read=2131235 bytes_retransmit=9 bytes_invalid=0 send_seq=196788 receive_seq=196788 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.0 pwm=0.421 sd_pos=1847406 sysload=0.19 cputime=285.662 memavail=7284668 print_time=4987.861 buffer_time=2.142 print_stall=0 extruder: target=240 temp=240.2 pwm=0.386
Stats 799763.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10304677 bytes_read=2131983 bytes_retransmit=9 bytes_invalid=0 send_seq=196876 receive_seq=196876 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=1848416 sysload=0.19 cputime=285.747 memavail=7284668 print_time=4989.090 buffer_time=2.370 print_stall=0 extruder: target=240 temp=239.9 pwm=0.478
Stats 799764.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10309204 bytes_read=2132681 bytes_retransmit=9 bytes_invalid=0 send_seq=196960 receive_seq=196960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=468 freq=119992801 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=1849644 sysload=0.19 cputime=285.827 memavail=7284668 print_time=4990.450 buffer_time=2.730 print_stall=0 extruder: target=240 temp=239.9 pwm=0.497
Stats 799765.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10312816 bytes_read=2133319 bytes_retransmit=9 bytes_invalid=0 send_seq=197029 receive_seq=197029 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=1849880 sysload=0.19 cputime=285.891 memavail=7284668 print_time=4991.243 buffer_time=2.522 print_stall=0 extruder: target=240 temp=240.0 pwm=0.465
Stats 799766.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10315855 bytes_read=2133901 bytes_retransmit=9 bytes_invalid=0 send_seq=197087 receive_seq=197087 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=1850284 sysload=0.18 cputime=285.958 memavail=7284668 print_time=4992.064 buffer_time=2.342 print_stall=0 extruder: target=240 temp=240.3 pwm=0.311
Stats 799767.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10318614 bytes_read=2134454 bytes_retransmit=9 bytes_invalid=0 send_seq=197142 receive_seq=197142 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=80 temp=80.0 pwm=0.433 sd_pos=1850791 sysload=0.18 cputime=286.023 memavail=7284168 print_time=4993.024 buffer_time=2.302 print_stall=0 extruder: target=240 temp=240.2 pwm=0.368
Stats 799768.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10322258 bytes_read=2135108 bytes_retransmit=9 bytes_invalid=0 send_seq=197211 receive_seq=197211 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992764 heater_bed: target=80 temp=80.0 pwm=0.378 sd_pos=1851550 sysload=0.18 cputime=286.093 memavail=7284168 print_time=4993.875 buffer_time=2.153 print_stall=0 extruder: target=240 temp=240.0 pwm=0.464
Stats 799769.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10325357 bytes_read=2135700 bytes_retransmit=9 bytes_invalid=0 send_seq=197271 receive_seq=197271 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992752 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=1852037 sysload=0.18 cputime=286.165 memavail=7284064 print_time=4995.091 buffer_time=2.368 print_stall=0 extruder: target=240 temp=239.8 pwm=0.550
Stats 799770.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10326290 bytes_read=2136108 bytes_retransmit=9 bytes_invalid=0 send_seq=197297 receive_seq=197297 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=80 temp=80.0 pwm=0.399 sd_pos=1852175 sysload=0.18 cputime=286.225 memavail=7283692 print_time=4995.805 buffer_time=2.081 print_stall=0 extruder: target=240 temp=239.8 pwm=0.487
Stats 799771.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10328173 bytes_read=2136596 bytes_retransmit=9 bytes_invalid=0 send_seq=197336 receive_seq=197336 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992738 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1852621 sysload=0.16 cputime=286.281 memavail=7286852 print_time=4996.802 buffer_time=2.078 print_stall=0 extruder: target=240 temp=239.8 pwm=0.487
Stats 799772.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=10331350 bytes_read=2137188 bytes_retransmit=9 bytes_invalid=0 send_seq=197396 receive_seq=197396 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1852981 sysload=0.16 cputime=286.343 memavail=7286376 print_time=4998.536 buffer_time=2.811 print_stall=0 extruder: target=240 temp=240.1 pwm=0.405
Stats 799773.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10332706 bytes_read=2137637 bytes_retransmit=9 bytes_invalid=0 send_seq=197427 receive_seq=197427 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992773 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1853119 sysload=0.16 cputime=286.392 memavail=7286124 print_time=4998.798 buffer_time=2.072 print_stall=0 extruder: target=240 temp=240.0 pwm=0.463
Stats 799774.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10335213 bytes_read=2138190 bytes_retransmit=9 bytes_invalid=0 send_seq=197479 receive_seq=197479 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.450 sd_pos=1853394 sysload=0.16 cputime=286.464 memavail=7285264 print_time=4999.893 buffer_time=2.167 print_stall=0 extruder: target=240 temp=240.5 pwm=0.241
Stats 799775.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10337558 bytes_read=2138717 bytes_retransmit=9 bytes_invalid=0 send_seq=197526 receive_seq=197526 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=1853581 sysload=0.16 cputime=286.518 memavail=7285336 print_time=5000.820 buffer_time=2.094 print_stall=0 extruder: target=240 temp=240.1 pwm=0.425
Stats 799776.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10341538 bytes_read=2139370 bytes_retransmit=9 bytes_invalid=0 send_seq=197601 receive_seq=197601 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992728 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=1854432 sysload=0.15 cputime=286.573 memavail=7285336 print_time=5001.757 buffer_time=2.030 print_stall=0 extruder: target=240 temp=239.9 pwm=0.454
Stats 799777.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10346667 bytes_read=2140128 bytes_retransmit=9 bytes_invalid=0 send_seq=197694 receive_seq=197694 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=2563 freq=119992783 heater_bed: target=80 temp=80.0 pwm=0.431 sd_pos=1856298 sysload=0.15 cputime=286.653 memavail=7285336 print_time=5003.454 buffer_time=2.726 print_stall=0 extruder: target=240 temp=240.2 pwm=0.331
Stats 799778.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10350647 bytes_read=2140786 bytes_retransmit=9 bytes_invalid=0 send_seq=197764 receive_seq=197764 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=1054 freq=119992771 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=1856591 sysload=0.15 cputime=286.727 memavail=7285336 print_time=5003.988 buffer_time=2.260 print_stall=0 extruder: target=240 temp=239.8 pwm=0.533
Stats 799779.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10354318 bytes_read=2141394 bytes_retransmit=9 bytes_invalid=0 send_seq=197830 receive_seq=197830 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=80.0 pwm=0.404 sd_pos=1856809 sysload=0.15 cputime=286.800 memavail=7285096 print_time=5004.941 buffer_time=2.212 print_stall=0 extruder: target=240 temp=239.8 pwm=0.477
Stats 799780.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10355588 bytes_read=2141837 bytes_retransmit=9 bytes_invalid=0 send_seq=197860 receive_seq=197860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=1856920 sysload=0.15 cputime=286.854 memavail=7283608 print_time=5005.770 buffer_time=2.041 print_stall=0 extruder: target=240 temp=240.0 pwm=0.378
Stats 799781.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10356892 bytes_read=2142279 bytes_retransmit=9 bytes_invalid=0 send_seq=197890 receive_seq=197890 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.479 sd_pos=1857032 sysload=0.14 cputime=286.912 memavail=7286484 print_time=5006.819 buffer_time=2.089 print_stall=0 extruder: target=240 temp=240.0 pwm=0.430
Stats 799782.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10358130 bytes_read=2142702 bytes_retransmit=9 bytes_invalid=0 send_seq=197919 receive_seq=197919 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=80.0 pwm=0.418 sd_pos=1857143 sysload=0.14 cputime=286.967 memavail=7286104 print_time=5007.730 buffer_time=2.000 print_stall=0 extruder: target=240 temp=240.0 pwm=0.485
Stats 799783.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10360950 bytes_read=2143286 bytes_retransmit=9 bytes_invalid=0 send_seq=197974 receive_seq=197974 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=79.9 pwm=0.550 sd_pos=1857415 sysload=0.14 cputime=287.028 memavail=7285612 print_time=5008.967 buffer_time=2.237 print_stall=0 extruder: target=240 temp=240.1 pwm=0.427
Stats 799784.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10366225 bytes_read=2144058 bytes_retransmit=9 bytes_invalid=0 send_seq=198070 receive_seq=198070 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992730 heater_bed: target=80 temp=79.9 pwm=0.459 sd_pos=1858235 sysload=0.14 cputime=287.097 memavail=7285108 print_time=5010.113 buffer_time=2.383 print_stall=0 extruder: target=240 temp=240.0 pwm=0.438
Stats 799785.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10369463 bytes_read=2144656 bytes_retransmit=9 bytes_invalid=0 send_seq=198134 receive_seq=198134 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=2479 freq=119992719 heater_bed: target=80 temp=79.9 pwm=0.429 sd_pos=1858733 sysload=0.14 cputime=287.173 memavail=7284620 print_time=5011.449 buffer_time=2.718 print_stall=0 extruder: target=240 temp=239.8 pwm=0.524
Stats 799786.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10373800 bytes_read=2145329 bytes_retransmit=9 bytes_invalid=0 send_seq=198210 receive_seq=198210 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=468 freq=119992706 heater_bed: target=80 temp=79.9 pwm=0.425 sd_pos=1858986 sysload=0.21 cputime=287.264 memavail=7284620 print_time=5012.108 buffer_time=2.376 print_stall=0 extruder: target=240 temp=239.5 pwm=0.594
Stats 799787.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10376807 bytes_read=2145866 bytes_retransmit=9 bytes_invalid=0 send_seq=198267 receive_seq=198257 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119992695 heater_bed: target=80 temp=79.9 pwm=0.425 sd_pos=1859264 sysload=0.21 cputime=287.332 memavail=7284620 print_time=5013.279 buffer_time=2.546 print_stall=0 extruder: target=240 temp=239.5 pwm=0.568
Stats 799788.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10379239 bytes_read=2146427 bytes_retransmit=9 bytes_invalid=0 send_seq=198315 receive_seq=198315 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992686 heater_bed: target=80 temp=79.9 pwm=0.425 sd_pos=1859921 sysload=0.21 cputime=287.403 memavail=7284620 print_time=5014.049 buffer_time=2.316 print_stall=0 extruder: target=240 temp=239.7 pwm=0.532
Stats 799789.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10381777 bytes_read=2146970 bytes_retransmit=9 bytes_invalid=0 send_seq=198366 receive_seq=198366 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992678 heater_bed: target=80 temp=79.9 pwm=0.423 sd_pos=1860191 sysload=0.21 cputime=287.465 memavail=7284620 print_time=5015.014 buffer_time=2.281 print_stall=0 extruder: target=240 temp=239.6 pwm=0.566
Stats 799790.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10383022 bytes_read=2147423 bytes_retransmit=9 bytes_invalid=0 send_seq=198396 receive_seq=198396 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992664 heater_bed: target=80 temp=79.9 pwm=0.443 sd_pos=1860442 sysload=0.21 cputime=287.542 memavail=7284120 print_time=5015.987 buffer_time=2.253 print_stall=0 extruder: target=240 temp=240.1 pwm=0.374
Stats 799791.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10383933 bytes_read=2147821 bytes_retransmit=9 bytes_invalid=0 send_seq=198420 receive_seq=198420 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992660 heater_bed: target=80 temp=79.9 pwm=0.443 sd_pos=1860580 sysload=0.35 cputime=287.607 memavail=7283868 print_time=5016.951 buffer_time=2.217 print_stall=0 extruder: target=240 temp=240.1 pwm=0.442
Stats 799792.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=10385423 bytes_read=2148274 bytes_retransmit=9 bytes_invalid=0 send_seq=198452 receive_seq=198452 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992653 heater_bed: target=80 temp=79.9 pwm=0.443 sd_pos=1860934 sysload=0.35 cputime=287.680 memavail=7286744 print_time=5017.993 buffer_time=2.257 print_stall=0 extruder: target=240 temp=240.2 pwm=0.401
Stats 799793.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10387079 bytes_read=2148761 bytes_retransmit=9 bytes_invalid=0 send_seq=198488 receive_seq=198488 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992647 heater_bed: target=80 temp=79.9 pwm=0.443 sd_pos=1861074 sysload=0.35 cputime=287.748 memavail=7286744 print_time=5018.740 buffer_time=2.003 print_stall=0 extruder: target=240 temp=239.9 pwm=0.539
Stats 799794.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10388889 bytes_read=2149239 bytes_retransmit=9 bytes_invalid=0 send_seq=198528 receive_seq=198528 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.0 pwm=0.355 sd_pos=1861381 sysload=0.35 cputime=287.830 memavail=7286520 print_time=5019.944 buffer_time=2.206 print_stall=0 extruder: target=240 temp=240.0 pwm=0.448
Stats 799795.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10392284 bytes_read=2149862 bytes_retransmit=9 bytes_invalid=0 send_seq=198594 receive_seq=198594 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992719 heater_bed: target=80 temp=80.0 pwm=0.362 sd_pos=1861752 sysload=0.35 cputime=287.896 memavail=7286520 print_time=5020.935 buffer_time=2.195 print_stall=0 extruder: target=240 temp=240.1 pwm=0.397
Stats 799796.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10394517 bytes_read=2150384 bytes_retransmit=9 bytes_invalid=0 send_seq=198640 receive_seq=198640 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992705 heater_bed: target=80 temp=80.0 pwm=0.362 sd_pos=1862203 sysload=0.40 cputime=287.961 memavail=7286520 print_time=5021.946 buffer_time=2.204 print_stall=0 extruder: target=240 temp=240.3 pwm=0.384
Stats 799797.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10396452 bytes_read=2150867 bytes_retransmit=9 bytes_invalid=0 send_seq=198681 receive_seq=198681 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119992692 heater_bed: target=80 temp=80.0 pwm=0.362 sd_pos=1862370 sysload=0.40 cputime=288.031 memavail=7286520 print_time=5022.977 buffer_time=2.234 print_stall=0 extruder: target=240 temp=240.4 pwm=0.363
Stats 799798.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10398507 bytes_read=2151391 bytes_retransmit=9 bytes_invalid=0 send_seq=198724 receive_seq=198724 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992684 heater_bed: target=80 temp=80.0 pwm=0.328 sd_pos=1862537 sysload=0.40 cputime=288.085 memavail=7286520 print_time=5023.989 buffer_time=2.244 print_stall=0 extruder: target=240 temp=240.1 pwm=0.462
Stats 799799.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10400487 bytes_read=2151883 bytes_retransmit=9 bytes_invalid=0 send_seq=198764 receive_seq=198764 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992676 heater_bed: target=80 temp=80.1 pwm=0.328 sd_pos=1862705 sysload=0.40 cputime=288.148 memavail=7285776 print_time=5025.015 buffer_time=2.269 print_stall=0 extruder: target=240 temp=239.8 pwm=0.572
Stats 799800.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10402440 bytes_read=2152366 bytes_retransmit=9 bytes_invalid=0 send_seq=198805 receive_seq=198805 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992670 heater_bed: target=80 temp=80.0 pwm=0.411 sd_pos=1862873 sysload=0.40 cputime=288.214 memavail=7284556 print_time=5026.027 buffer_time=2.279 print_stall=0 extruder: target=240 temp=239.8 pwm=0.562
Stats 799801.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10404421 bytes_read=2152864 bytes_retransmit=9 bytes_invalid=0 send_seq=198846 receive_seq=198846 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=119992667 heater_bed: target=80 temp=80.1 pwm=0.411 sd_pos=1863039 sysload=0.45 cputime=288.268 memavail=7288112 print_time=5027.053 buffer_time=2.304 print_stall=0 extruder: target=240 temp=240.4 pwm=0.295
Stats 799802.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10406396 bytes_read=2153356 bytes_retransmit=9 bytes_invalid=0 send_seq=198886 receive_seq=198886 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=119992666 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=1863207 sysload=0.45 cputime=288.326 memavail=7288112 print_time=5028.047 buffer_time=2.296 print_stall=0 extruder: target=240 temp=240.1 pwm=0.437
Stats 799803.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10408318 bytes_read=2153849 bytes_retransmit=9 bytes_invalid=0 send_seq=198926 receive_seq=198926 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=119992666 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=1863375 sysload=0.45 cputime=288.381 memavail=7287860 print_time=5029.074 buffer_time=2.322 print_stall=0 extruder: target=240 temp=239.9 pwm=0.535
Stats 799804.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10409813 bytes_read=2154317 bytes_retransmit=9 bytes_invalid=0 send_seq=198961 receive_seq=198961 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992663 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=1863485 sysload=0.45 cputime=288.445 memavail=7287028 print_time=5029.753 buffer_time=2.001 print_stall=0 extruder: target=240 temp=240.4 pwm=0.345
Stats 799805.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10412545 bytes_read=2154874 bytes_retransmit=9 bytes_invalid=0 send_seq=199014 receive_seq=199014 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992659 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=1863994 sysload=0.45 cputime=288.500 memavail=7286088 print_time=5030.986 buffer_time=2.233 print_stall=0 extruder: target=240 temp=240.1 pwm=0.428
Stats 799806.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10416823 bytes_read=2155547 bytes_retransmit=9 bytes_invalid=0 send_seq=199093 receive_seq=199093 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992654 heater_bed: target=80 temp=80.0 pwm=0.427 sd_pos=1865234 sysload=0.41 cputime=288.565 memavail=7286088 print_time=5032.123 buffer_time=2.367 print_stall=0 extruder: target=240 temp=239.8 pwm=0.558
Stats 799807.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10418271 bytes_read=2156010 bytes_retransmit=9 bytes_invalid=0 send_seq=199127 receive_seq=199127 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=119992687 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=1865493 sysload=0.41 cputime=288.626 memavail=7286088 print_time=5033.160 buffer_time=2.403 print_stall=0 extruder: target=240 temp=239.9 pwm=0.523
Stats 799808.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10419481 bytes_read=2156458 bytes_retransmit=9 bytes_invalid=0 send_seq=199155 receive_seq=199155 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992680 heater_bed: target=80 temp=80.0 pwm=0.401 sd_pos=1865576 sysload=0.41 cputime=288.675 memavail=7286088 print_time=5033.979 buffer_time=2.221 print_stall=0 extruder: target=240 temp=239.9 pwm=0.561
Stats 799809.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10420400 bytes_read=2156861 bytes_retransmit=9 bytes_invalid=0 send_seq=199180 receive_seq=199180 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992673 heater_bed: target=80 temp=80.0 pwm=0.424 sd_pos=1865826 sysload=0.41 cputime=288.731 memavail=7285836 print_time=5034.935 buffer_time=2.177 print_stall=0 extruder: target=240 temp=240.1 pwm=0.399
Stats 799810.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10421399 bytes_read=2157298 bytes_retransmit=9 bytes_invalid=0 send_seq=199206 receive_seq=199206 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=119992664 heater_bed: target=80 temp=79.9 pwm=0.497 sd_pos=1865994 sysload=0.41 cputime=288.786 memavail=7286128 print_time=5035.888 buffer_time=2.129 print_stall=0 extruder: target=240 temp=239.8 pwm=0.565
Stats 799811.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10424050 bytes_read=2157841 bytes_retransmit=9 bytes_invalid=0 send_seq=199259 receive_seq=199259 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992666 heater_bed: target=80 temp=80.0 pwm=0.433 sd_pos=1866424 sysload=0.38 cputime=288.837 memavail=7286128 print_time=5037.499 buffer_time=2.739 print_stall=0 extruder: target=240 temp=240.2 pwm=0.330
Stats 799812.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10425979 bytes_read=2158319 bytes_retransmit=9 bytes_invalid=0 send_seq=199299 receive_seq=199299 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.433 sd_pos=1866820 sysload=0.38 cputime=288.872 memavail=7285008 print_time=5037.836 buffer_time=2.075 print_stall=0 extruder: target=240 temp=240.1 pwm=0.398
Stats 799813.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=10428983 bytes_read=2158931 bytes_retransmit=9 bytes_invalid=0 send_seq=199357 receive_seq=199357 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=80 temp=80.0 pwm=0.447 sd_pos=1867326 sysload=0.38 cputime=288.926 memavail=7287820 print_time=5038.947 buffer_time=2.185 print_stall=0 extruder: target=240 temp=240.3 pwm=0.398
Stats 799814.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=10430896 bytes_read=2159404 bytes_retransmit=9 bytes_invalid=0 send_seq=199396 receive_seq=199396 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.0 pwm=0.337 sd_pos=1867494 sysload=0.38 cputime=288.965 memavail=7286028 print_time=5039.909 buffer_time=2.146 print_stall=0 extruder: target=240 temp=240.0 pwm=0.530
Stats 799815.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=10432976 bytes_read=2159907 bytes_retransmit=9 bytes_invalid=0 send_seq=199441 receive_seq=199441 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992724 heater_bed: target=80 temp=80.0 pwm=0.329 sd_pos=1867661 sysload=0.38 cputime=289.003 memavail=7287740 print_time=5040.933 buffer_time=2.171 print_stall=0 extruder: target=240 temp=239.8 pwm=0.550
Stats 799816.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=10435034 bytes_read=2160434 bytes_retransmit=9 bytes_invalid=0 send_seq=199485 receive_seq=199485 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992720 heater_bed: target=80 temp=80.0 pwm=0.400 sd_pos=1867827 sysload=0.35 cputime=289.062 memavail=7289064 print_time=5041.942 buffer_time=2.179 print_stall=0 extruder: target=240 temp=239.8 pwm=0.518
Stats 799817.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=10437106 bytes_read=2160927 bytes_retransmit=9 bytes_invalid=0 send_seq=199528 receive_seq=199528 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992716 heater_bed: target=80 temp=80.0 pwm=0.397 sd_pos=1867995 sysload=0.35 cputime=289.094 memavail=7286904 print_time=5042.966 buffer_time=2.203 print_stall=0 extruder: target=240 temp=240.1 pwm=0.411
Stats 799818.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10439103 bytes_read=2161431 bytes_retransmit=9 bytes_invalid=0 send_seq=199570 receive_seq=199570 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=119992708 heater_bed: target=80 temp=80.1 pwm=0.330 sd_pos=1868162 sysload=0.35 cputime=289.131 memavail=7286396 print_time=5043.977 buffer_time=2.213 print_stall=0 extruder: target=240 temp=240.2 pwm=0.420
Stats 799819.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10441120 bytes_read=2161948 bytes_retransmit=9 bytes_invalid=0 send_seq=199612 receive_seq=199612 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992697 heater_bed: target=80 temp=80.1 pwm=0.416 sd_pos=1868330 sysload=0.35 cputime=289.173 memavail=7285276 print_time=5045.002 buffer_time=2.237 print_stall=0 extruder: target=240 temp=240.1 pwm=0.430
Stats 799820.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10443290 bytes_read=2162446 bytes_retransmit=9 bytes_invalid=0 send_seq=199656 receive_seq=199656 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992693 heater_bed: target=80 temp=80.0 pwm=0.447 sd_pos=1868498 sysload=0.35 cputime=289.220 memavail=7285460 print_time=5046.013 buffer_time=2.247 print_stall=0 extruder: target=240 temp=239.9 pwm=0.526
Stats 799821.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10445487 bytes_read=2162959 bytes_retransmit=9 bytes_invalid=0 send_seq=199703 receive_seq=199703 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.438 sd_pos=1868664 sysload=0.40 cputime=289.275 memavail=7286612 print_time=5047.037 buffer_time=2.271 print_stall=0 extruder: target=240 temp=240.0 pwm=0.426
Stats 799822.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10448111 bytes_read=2163535 bytes_retransmit=9 bytes_invalid=0 send_seq=199757 receive_seq=199757 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.0 pwm=0.415 sd_pos=1869127 sysload=0.40 cputime=289.333 memavail=7287824 print_time=5048.028 buffer_time=2.261 print_stall=0 extruder: target=240 temp=240.1 pwm=0.409
Stats 799823.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10450283 bytes_read=2164047 bytes_retransmit=9 bytes_invalid=0 send_seq=199802 receive_seq=199802 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992724 heater_bed: target=80 temp=80.0 pwm=0.494 sd_pos=1869294 sysload=0.40 cputime=289.378 memavail=7287932 print_time=5048.871 buffer_time=2.103 print_stall=0 extruder: target=240 temp=239.9 pwm=0.472
Stats 799824.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10454593 bytes_read=2164728 bytes_retransmit=9 bytes_invalid=0 send_seq=199884 receive_seq=199884 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992717 heater_bed: target=80 temp=80.0 pwm=0.518 sd_pos=1870335 sysload=0.40 cputime=289.458 memavail=7287108 print_time=5049.980 buffer_time=2.211 print_stall=0 extruder: target=240 temp=239.8 pwm=0.526
Stats 799825.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10456278 bytes_read=2165217 bytes_retransmit=9 bytes_invalid=0 send_seq=199921 receive_seq=199921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=80 temp=80.0 pwm=0.498 sd_pos=1870445 sysload=0.40 cputime=289.527 memavail=7287108 print_time=5051.468 buffer_time=2.699 print_stall=0 extruder: target=240 temp=239.9 pwm=0.468
Stats 799826.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10456860 bytes_read=2165590 bytes_retransmit=9 bytes_invalid=0 send_seq=199940 receive_seq=199940 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=1870445 sysload=0.37 cputime=289.578 memavail=7287108 print_time=5051.799 buffer_time=2.030 print_stall=0 extruder: target=240 temp=239.7 pwm=0.531
Stats 799827.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10458164 bytes_read=2166018 bytes_retransmit=9 bytes_invalid=0 send_seq=199970 receive_seq=199970 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992767 heater_bed: target=80 temp=80.0 pwm=0.405 sd_pos=1870639 sysload=0.37 cputime=289.640 memavail=7287108 print_time=5053.079 buffer_time=2.309 print_stall=0 extruder: target=240 temp=239.6 pwm=0.554
Stats 799828.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10459065 bytes_read=2166465 bytes_retransmit=9 bytes_invalid=0 send_seq=199995 receive_seq=199995 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=6 upcoming_bytes=0 freq=119992758 heater_bed: target=80 temp=79.9 pwm=0.562 sd_pos=1870750 sysload=0.37 cputime=289.698 memavail=7286868 print_time=5054.033 buffer_time=2.263 print_stall=0 extruder: target=240 temp=240.1 pwm=0.374
Stats 799829.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10460814 bytes_read=2166938 bytes_retransmit=9 bytes_invalid=0 send_seq=200034 receive_seq=200034 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=80 temp=80.0 pwm=0.385 sd_pos=1870887 sysload=0.37 cputime=289.764 memavail=7286868 print_time=5055.270 buffer_time=2.499 print_stall=0 extruder: target=240 temp=240.3 pwm=0.317
Stats 799830.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10464348 bytes_read=2167551 bytes_retransmit=9 bytes_invalid=0 send_seq=200101 receive_seq=200101 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119992784 heater_bed: target=80 temp=80.0 pwm=0.451 sd_pos=1871635 sysload=0.37 cputime=289.833 memavail=7285864 print_time=5056.182 buffer_time=2.411 print_stall=0 extruder: target=240 temp=240.1 pwm=0.469
Stats 799831.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10466018 bytes_read=2168033 bytes_retransmit=9 bytes_invalid=0 send_seq=200136 receive_seq=200136 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=80 temp=80.0 pwm=0.388 sd_pos=1872031 sysload=0.42 cputime=289.890 memavail=7285864 print_time=5056.854 buffer_time=2.082 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 799832.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10467890 bytes_read=2168501 bytes_retransmit=9 bytes_invalid=0 send_seq=200174 receive_seq=200174 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=80 temp=80.0 pwm=0.324 sd_pos=1872199 sysload=0.42 cputime=289.944 memavail=7288928 print_time=5057.815 buffer_time=2.043 print_stall=0 extruder: target=240 temp=240.0 pwm=0.469
Stats 799833.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10469876 bytes_read=2169009 bytes_retransmit=9 bytes_invalid=0 send_seq=200217 receive_seq=200217 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.374 sd_pos=1872365 sysload=0.42 cputime=290.010 memavail=7288616 print_time=5058.838 buffer_time=2.064 print_stall=0 extruder: target=240 temp=239.9 pwm=0.467
Stats 799834.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10471837 bytes_read=2169521 bytes_retransmit=9 bytes_invalid=0 send_seq=200258 receive_seq=200258 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992747 heater_bed: target=80 temp=80.0 pwm=0.393 sd_pos=1872533 sysload=0.42 cputime=290.085 memavail=7286540 print_time=5059.846 buffer_time=2.072 print_stall=0 extruder: target=240 temp=240.0 pwm=0.385
Stats 799835.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10473787 bytes_read=2169999 bytes_retransmit=9 bytes_invalid=0 send_seq=200298 receive_seq=200298 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992741 heater_bed: target=80 temp=80.1 pwm=0.393 sd_pos=1872701 sysload=0.42 cputime=290.163 memavail=7286628 print_time=5060.868 buffer_time=2.093 print_stall=0 extruder: target=240 temp=240.0 pwm=0.460
Stats 799836.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10475753 bytes_read=2170487 bytes_retransmit=9 bytes_invalid=0 send_seq=200340 receive_seq=200340 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=80 temp=80.0 pwm=0.467 sd_pos=1872868 sysload=0.39 cputime=290.227 memavail=7286140 print_time=5061.877 buffer_time=2.101 print_stall=0 extruder: target=240 temp=240.3 pwm=0.366
Stats 799837.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10477744 bytes_read=2170994 bytes_retransmit=9 bytes_invalid=0 send_seq=200380 receive_seq=200380 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992731 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=1873035 sysload=0.39 cputime=290.281 memavail=7286140 print_time=5062.899 buffer_time=2.123 print_stall=0 extruder: target=240 temp=240.3 pwm=0.357
Stats 799838.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10479699 bytes_read=2171487 bytes_retransmit=9 bytes_invalid=0 send_seq=200420 receive_seq=200420 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=80 temp=80.0 pwm=0.441 sd_pos=1873203 sysload=0.39 cputime=290.338 memavail=7286140 print_time=5063.908 buffer_time=2.130 print_stall=0 extruder: target=240 temp=240.3 pwm=0.355
Stats 799839.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10481667 bytes_read=2171985 bytes_retransmit=9 bytes_invalid=0 send_seq=200461 receive_seq=200461 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992872 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=1873370 sysload=0.39 cputime=290.428 memavail=7286140 print_time=5064.930 buffer_time=2.152 print_stall=0 extruder: target=240 temp=240.0 pwm=0.488
Stats 799840.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10484165 bytes_read=2172527 bytes_retransmit=9 bytes_invalid=0 send_seq=200511 receive_seq=200511 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992851 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=1873835 sysload=0.39 cputime=290.495 memavail=7286144 print_time=5065.923 buffer_time=2.144 print_stall=0 extruder: target=240 temp=239.9 pwm=0.422
Stats 799841.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10487837 bytes_read=2173150 bytes_retransmit=9 bytes_invalid=0 send_seq=200580 receive_seq=200580 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=119992830 heater_bed: target=80 temp=80.0 pwm=0.463 sd_pos=1874170 sysload=0.36 cputime=290.584 memavail=7286144 print_time=5067.263 buffer_time=2.484 print_stall=0 extruder: target=240 temp=240.0 pwm=0.407
Stats 799842.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10490264 bytes_read=2173698 bytes_retransmit=9 bytes_invalid=0 send_seq=200631 receive_seq=200631 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=80 temp=80.0 pwm=0.448 sd_pos=1875020 sysload=0.36 cputime=290.670 memavail=7286144 print_time=5067.877 buffer_time=2.097 print_stall=0 extruder: target=240 temp=240.1 pwm=0.391
Stats 799843.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10491896 bytes_read=2174176 bytes_retransmit=9 bytes_invalid=0 send_seq=200665 receive_seq=200665 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=80 temp=80.0 pwm=0.502 sd_pos=1875131 sysload=0.36 cputime=290.744 memavail=7286144 print_time=5069.371 buffer_time=2.590 print_stall=0 extruder: target=240 temp=240.0 pwm=0.407
Stats 799844.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10492654 bytes_read=2174569 bytes_retransmit=9 bytes_invalid=0 send_seq=200688 receive_seq=200688 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119992790 heater_bed: target=80 temp=80.0 pwm=0.454 sd_pos=1875269 sysload=0.36 cputime=290.817 memavail=7285904 print_time=5070.357 buffer_time=2.575 print_stall=0 extruder: target=240 temp=239.9 pwm=0.515
Stats 799845.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10493845 bytes_read=2175012 bytes_retransmit=9 bytes_invalid=0 send_seq=200718 receive_seq=200718 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992775 heater_bed: target=80 temp=80.0 pwm=0.458 sd_pos=1875324 sysload=0.36 cputime=290.898 memavail=7285904 print_time=5070.993 buffer_time=2.212 print_stall=0 extruder: target=240 temp=239.9 pwm=0.443
Stats 799846.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10494690 bytes_read=2175419 bytes_retransmit=9 bytes_invalid=0 send_seq=200741 receive_seq=200741 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=80 temp=79.9 pwm=0.506 sd_pos=1875437 sysload=0.33 cputime=290.983 memavail=7285904 print_time=5071.939 buffer_time=2.157 print_stall=0 extruder: target=240 temp=239.9 pwm=0.494
Stats 799847.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10496723 bytes_read=2175912 bytes_retransmit=9 bytes_invalid=0 send_seq=200784 receive_seq=200784 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=80 temp=80.0 pwm=0.417 sd_pos=1875783 sysload=0.33 cputime=291.058 memavail=7285904 print_time=5073.230 buffer_time=2.446 print_stall=0 extruder: target=240 temp=240.0 pwm=0.412
Stats 799848.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=10499868 bytes_read=2176515 bytes_retransmit=9 bytes_invalid=0 send_seq=200843 receive_seq=200843 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992762 heater_bed: target=80 temp=80.0 pwm=0.343 sd_pos=1876290 sysload=0.33 cputime=291.129 memavail=7284660 print_time=5073.993 buffer_time=2.209 print_stall=0 extruder: target=240 temp=240.2 pwm=0.344
Stats 799849.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=10502110 bytes_read=2177037 bytes_retransmit=9 bytes_invalid=0 send_seq=200889 receive_seq=200889 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119992744 heater_bed: target=80 temp=80.0 pwm=0.432 sd_pos=1876741 sysload=0.33 cputime=291.207 memavail=7284660 print_time=5074.962 buffer_time=2.176 print_stall=0 extruder: target=240 temp=240.3 pwm=0.336
Stats 799850.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=10504238 bytes_read=2177525 bytes_retransmit=9 bytes_invalid=0 send_seq=200931 receive_seq=200931 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.340 sd_pos=1876909 sysload=0.33 cputime=291.270 memavail=7287536 print_time=5075.987 buffer_time=2.199 print_stall=0 extruder: target=240 temp=240.3 pwm=0.372
Stats 799851.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=10506289 bytes_read=2178049 bytes_retransmit=9 bytes_invalid=0 send_seq=200975 receive_seq=200975 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992699 heater_bed: target=80 temp=80.0 pwm=0.340 sd_pos=1877076 sysload=0.30 cputime=291.347 memavail=7286104 print_time=5076.998 buffer_time=2.210 print_stall=0 extruder: target=240 temp=239.9 pwm=0.517
Stats 799852.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000015 bytes_write=10508359 bytes_read=2178556 bytes_retransmit=9 bytes_invalid=0 send_seq=201018 receive_seq=201018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992693 heater_bed: target=80 temp=80.0 pwm=0.422 sd_pos=1877244 sysload=0.30 cputime=291.419 memavail=7285096 print_time=5078.023 buffer_time=2.235 print_stall=0 extruder: target=240 temp=239.8 pwm=0.507
Stats 799853.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10510377 bytes_read=2179055 bytes_retransmit=9 bytes_invalid=0 send_seq=201059 receive_seq=201059 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992684 heater_bed: target=80 temp=80.1 pwm=0.366 sd_pos=1877412 sysload=0.30 cputime=291.497 memavail=7284844 print_time=5079.034 buffer_time=2.245 print_stall=0 extruder: target=240 temp=240.1 pwm=0.381
Stats 799854.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10512409 bytes_read=2179568 bytes_retransmit=9 bytes_invalid=0 send_seq=201103 receive_seq=201103 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992671 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=1877579 sysload=0.30 cputime=291.571 memavail=7284996 print_time=5080.059 buffer_time=2.269 print_stall=0 extruder: target=240 temp=239.9 pwm=0.432
Stats 799855.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10514465 bytes_read=2180080 bytes_retransmit=9 bytes_invalid=0 send_seq=201147 receive_seq=201147 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992779 heater_bed: target=80 temp=80.1 pwm=0.357 sd_pos=1877747 sysload=0.30 cputime=291.634 memavail=7287996 print_time=5081.070 buffer_time=2.280 print_stall=0 extruder: target=240 temp=240.1 pwm=0.404
Stats 799856.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10516581 bytes_read=2180578 bytes_retransmit=9 bytes_invalid=0 send_seq=201191 receive_seq=201191 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=119992761 heater_bed: target=80 temp=80.0 pwm=0.480 sd_pos=1877935 sysload=0.28 cputime=291.678 memavail=7287996 print_time=5082.095 buffer_time=2.304 print_stall=0 extruder: target=240 temp=240.2 pwm=0.352
Stats 799857.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10519856 bytes_read=2181186 bytes_retransmit=9 bytes_invalid=0 send_seq=201254 receive_seq=201254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119992745 heater_bed: target=80 temp=80.0 pwm=0.484 sd_pos=1878476 sysload=0.28 cputime=291.733 memavail=7287284 print_time=5083.448 buffer_time=2.656 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 799858.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10521988 bytes_read=2181722 bytes_retransmit=9 bytes_invalid=0 send_seq=201300 receive_seq=201300 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992726 heater_bed: target=80 temp=80.0 pwm=0.537 sd_pos=1878615 sysload=0.28 cputime=291.785 memavail=7287284 print_time=5084.286 buffer_time=2.493 print_stall=0 extruder: target=240 temp=239.8 pwm=0.556
Stats 799859.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10524779 bytes_read=2182263 bytes_retransmit=9 bytes_invalid=0 send_seq=201354 receive_seq=201354 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=80 temp=80.0 pwm=0.353 sd_pos=1878865 sysload=0.28 cputime=291.853 memavail=7287000 print_time=5085.100 buffer_time=2.306 print_stall=0 extruder: target=240 temp=239.9 pwm=0.430
Stats 799860.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10527554 bytes_read=2182829 bytes_retransmit=9 bytes_invalid=0 send_seq=201410 receive_seq=201410 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992722 heater_bed: target=80 temp=80.0 pwm=0.457 sd_pos=1879464 sysload=0.28 cputime=291.908 memavail=7288036 print_time=5085.963 buffer_time=2.167 print_stall=0 extruder: target=240 temp=239.6 pwm=0.589
Stats 799861.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10528235 bytes_read=2183226 bytes_retransmit=9 bytes_invalid=0 send_seq=201431 receive_seq=201431 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992710 heater_bed: target=80 temp=80.0 pwm=0.496 sd_pos=1879520 sysload=0.25 cputime=291.962 memavail=7287324 print_time=5086.916 buffer_time=2.120 print_stall=0 extruder: target=240 temp=240.1 pwm=0.373
Stats 799862.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10529371 bytes_read=2183639 bytes_retransmit=9 bytes_invalid=0 send_seq=201458 receive_seq=201458 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992702 heater_bed: target=80 temp=80.0 pwm=0.464 sd_pos=1879658 sysload=0.25 cputime=292.023 memavail=7286568 print_time=5088.153 buffer_time=2.357 print_stall=0 extruder: target=240 temp=240.1 pwm=0.369
Stats 799863.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10530517 bytes_read=2184092 bytes_retransmit=9 bytes_invalid=0 send_seq=201487 receive_seq=201487 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119992695 heater_bed: target=80 temp=80.0 pwm=0.477 sd_pos=1879771 sysload=0.25 cputime=292.083 memavail=7286316 print_time=5089.415 buffer_time=2.618 print_stall=0 extruder: target=240 temp=239.9 pwm=0.463
Stats 799864.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10531561 bytes_read=2184514 bytes_retransmit=9 bytes_invalid=0 send_seq=201513 receive_seq=201513 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992719 heater_bed: target=80 temp=79.9 pwm=0.477 sd_pos=1879827 sysload=0.25 cputime=292.152 memavail=7284824 print_time=5089.887 buffer_time=2.089 print_stall=0 extruder: target=240 temp=240.0 pwm=0.468
Stats 799865.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10532363 bytes_read=2184907 bytes_retransmit=9 bytes_invalid=0 send_seq=201536 receive_seq=201536 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992712 heater_bed: target=80 temp=80.0 pwm=0.377 sd_pos=1879950 sysload=0.25 cputime=292.213 memavail=7284824 print_time=5090.822 buffer_time=2.024 print_stall=0 extruder: target=240 temp=240.3 pwm=0.327
Stats 799866.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10536552 bytes_read=2185590 bytes_retransmit=9 bytes_invalid=0 send_seq=201614 receive_seq=201614 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992698 heater_bed: target=80 temp=80.0 pwm=0.388 sd_pos=1880741 sysload=0.23 cputime=292.281 memavail=7285580 print_time=5091.949 buffer_time=2.150 print_stall=0 extruder: target=240 temp=240.1 pwm=0.412
Stats 799867.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10538612 bytes_read=2186092 bytes_retransmit=9 bytes_invalid=0 send_seq=201656 receive_seq=201656 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992691 heater_bed: target=80 temp=80.0 pwm=0.388 sd_pos=1881166 sysload=0.23 cputime=292.341 memavail=7290124 print_time=5092.862 buffer_time=2.062 print_stall=0 extruder: target=240 temp=239.9 pwm=0.527
Stats 799868.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10540587 bytes_read=2186590 bytes_retransmit=9 bytes_invalid=0 send_seq=201697 receive_seq=201697 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=1881333 sysload=0.23 cputime=292.403 memavail=7290220 print_time=5093.878 buffer_time=2.077 print_stall=0 extruder: target=240 temp=239.7 pwm=0.598
Stats 799869.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10542584 bytes_read=2187093 bytes_retransmit=9 bytes_invalid=0 send_seq=201739 receive_seq=201739 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992720 heater_bed: target=80 temp=80.1 pwm=0.332 sd_pos=1881501 sysload=0.23 cputime=292.453 memavail=7289212 print_time=5094.879 buffer_time=2.078 print_stall=0 extruder: target=240 temp=240.0 pwm=0.425
Stats 799870.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10544584 bytes_read=2187590 bytes_retransmit=9 bytes_invalid=0 send_seq=201780 receive_seq=201780 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992712 heater_bed: target=80 temp=80.1 pwm=0.358 sd_pos=1881669 sysload=0.23 cputime=292.507 memavail=7288708 print_time=5095.895 buffer_time=2.093 print_stall=0 extruder: target=240 temp=239.7 pwm=0.566
Stats 799871.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10546533 bytes_read=2188073 bytes_retransmit=9 bytes_invalid=0 send_seq=201821 receive_seq=201821 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992704 heater_bed: target=80 temp=80.1 pwm=0.417 sd_pos=1881836 sysload=0.21 cputime=292.563 memavail=7288220 print_time=5096.897 buffer_time=2.094 print_stall=0 extruder: target=240 temp=240.1 pwm=0.367
Stats 799872.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10548523 bytes_read=2188576 bytes_retransmit=9 bytes_invalid=0 send_seq=201863 receive_seq=201863 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992694 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=1882003 sysload=0.21 cputime=292.619 memavail=7288220 print_time=5097.912 buffer_time=2.108 print_stall=0 extruder: target=240 temp=240.1 pwm=0.410
Stats 799873.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10550422 bytes_read=2189078 bytes_retransmit=9 bytes_invalid=0 send_seq=201902 receive_seq=201902 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992684 heater_bed: target=80 temp=80.0 pwm=0.414 sd_pos=1882170 sysload=0.21 cputime=292.672 memavail=7287968 print_time=5098.914 buffer_time=2.110 print_stall=0 extruder: target=240 temp=240.1 pwm=0.464
Stats 799874.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10552370 bytes_read=2189556 bytes_retransmit=9 bytes_invalid=0 send_seq=201942 receive_seq=201942 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992687 heater_bed: target=80 temp=80.0 pwm=0.506 sd_pos=1882338 sysload=0.21 cputime=292.731 memavail=7287968 print_time=5099.929 buffer_time=2.124 print_stall=0 extruder: target=240 temp=240.1 pwm=0.462
Stats 799875.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10555428 bytes_read=2190144 bytes_retransmit=9 bytes_invalid=0 send_seq=202001 receive_seq=202001 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992674 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=1882859 sysload=0.21 cputime=292.785 memavail=7287968 print_time=5101.280 buffer_time=2.473 print_stall=0 extruder: target=240 temp=239.9 pwm=0.462
Stats 799876.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10556810 bytes_read=2190596 bytes_retransmit=9 bytes_invalid=0 send_seq=202033 receive_seq=202033 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992672 heater_bed: target=80 temp=80.0 pwm=0.455 sd_pos=1882999 sysload=0.20 cputime=292.838 memavail=7287728 print_time=5101.938 buffer_time=2.131 print_stall=0 extruder: target=240 temp=240.1 pwm=0.375
Stats 799877.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000017 bytes_write=10560244 bytes_read=2191204 bytes_retransmit=9 bytes_invalid=0 send_seq=202099 receive_seq=202099 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992706 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=1883787 sysload=0.20 cputime=292.903 memavail=7287256 print_time=5102.966 buffer_time=2.159 print_stall=0 extruder: target=240 temp=240.1 pwm=0.415
Stats 799878.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10563473 bytes_read=2191813 bytes_retransmit=9 bytes_invalid=0 send_seq=202159 receive_seq=202159 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992702 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=1884607 sysload=0.20 cputime=292.976 memavail=7287256 print_time=5103.811 buffer_time=2.003 print_stall=0 extruder: target=240 temp=239.8 pwm=0.482
Stats 799879.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10564490 bytes_read=2192230 bytes_retransmit=9 bytes_invalid=0 send_seq=202184 receive_seq=202184 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992697 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=1884662 sysload=0.20 cputime=293.021 memavail=7286528 print_time=5105.052 buffer_time=2.243 print_stall=0 extruder: target=240 temp=239.9 pwm=0.488
Stats 799880.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10565536 bytes_read=2192638 bytes_retransmit=9 bytes_invalid=0 send_seq=202210 receive_seq=202210 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992687 heater_bed: target=80 temp=80.0 pwm=0.444 sd_pos=1884773 sysload=0.20 cputime=293.083 memavail=7285776 print_time=5106.278 buffer_time=2.469 print_stall=0 extruder: target=240 temp=240.1 pwm=0.454
Stats 799881.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10566582 bytes_read=2193061 bytes_retransmit=9 bytes_invalid=0 send_seq=202236 receive_seq=202236 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992687 heater_bed: target=80 temp=80.0 pwm=0.416 sd_pos=1884829 sysload=0.26 cputime=293.133 memavail=7285776 print_time=5106.959 buffer_time=2.149 print_stall=0 extruder: target=240 temp=240.0 pwm=0.466
Stats 799882.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10567288 bytes_read=2193448 bytes_retransmit=9 bytes_invalid=0 send_seq=202255 receive_seq=202255 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992678 heater_bed: target=80 temp=80.0 pwm=0.460 sd_pos=1884913 sysload=0.26 cputime=293.180 memavail=7285776 print_time=5107.934 buffer_time=2.124 print_stall=0 extruder: target=240 temp=239.9 pwm=0.466
Stats 799883.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=10568930 bytes_read=2193916 bytes_retransmit=9 bytes_invalid=0 send_seq=202290 receive_seq=202290 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992671 heater_bed: target=80 temp=80.0 pwm=0.407 sd_pos=1885107 sysload=0.26 cputime=293.235 memavail=7285524 print_time=5109.227 buffer_time=2.416 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 799884.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=10571754 bytes_read=2194489 bytes_retransmit=9 bytes_invalid=0 send_seq=202346 receive_seq=202346 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992671 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=1885738 sysload=0.26 cputime=293.298 memavail=7285524 print_time=5109.866 buffer_time=2.054 print_stall=0 extruder: target=240 temp=240.1 pwm=0.456
Stats 799885.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=10574825 bytes_read=2195076 bytes_retransmit=9 bytes_invalid=0 send_seq=202405 receive_seq=202405 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992673 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=1886247 sysload=0.26 cputime=293.362 memavail=7285524 print_time=5111.019 buffer_time=2.207 print_stall=0 extruder: target=240 temp=240.0 pwm=0.482
Stats 799886.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=10576715 bytes_read=2195544 bytes_retransmit=9 bytes_invalid=0 send_seq=202443 receive_seq=202443 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992710 heater_bed: target=80 temp=80.0 pwm=0.395 sd_pos=1886413 sysload=0.32 cputime=293.419 memavail=7285524 print_time=5112.029 buffer_time=2.216 print_stall=0 extruder: target=240 temp=240.1 pwm=0.463
Stats 799887.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000016 bytes_write=10578596 bytes_read=2196032 bytes_retransmit=9 bytes_invalid=0 send_seq=202482 receive_seq=202482 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119992704 heater_bed: target=80 temp=80.0 pwm=0.338 sd_pos=1886581 sysload=0.32 cputime=293.477 memavail=7285524 print_time=5113.026 buffer_time=2.213 print_stall=0 extruder: target=240 temp=240.0 pwm=0.463
Stats 799888.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10580585 bytes_read=2196540 bytes_retransmit=9 bytes_invalid=0 send_seq=202522 receive_seq=202522 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992696 heater_bed: target=80 temp=80.0 pwm=0.390 sd_pos=1886769 sysload=0.32 cputime=293.530 memavail=7288516 print_time=5114.037 buffer_time=2.222 print_stall=0 extruder: target=240 temp=239.8 pwm=0.519
Stats 799889.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10582547 bytes_read=2197028 bytes_retransmit=9 bytes_invalid=0 send_seq=202564 receive_seq=202564 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992686 heater_bed: target=80 temp=80.1 pwm=0.394 sd_pos=1886935 sysload=0.32 cputime=293.594 memavail=7288460 print_time=5115.034 buffer_time=2.218 print_stall=0 extruder: target=240 temp=239.8 pwm=0.479
Stats 799890.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10584580 bytes_read=2197536 bytes_retransmit=9 bytes_invalid=0 send_seq=202607 receive_seq=202607 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=119992685 heater_bed: target=80 temp=80.1 pwm=0.377 sd_pos=1887103 sysload=0.32 cputime=293.661 memavail=7288212 print_time=5116.044 buffer_time=2.228 print_stall=0 extruder: target=240 temp=239.9 pwm=0.462
Stats 799891.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10586612 bytes_read=2198038 bytes_retransmit=9 bytes_invalid=0 send_seq=202649 receive_seq=202649 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992768 heater_bed: target=80 temp=80.1 pwm=0.430 sd_pos=1887270 sysload=0.37 cputime=293.734 memavail=7287232 print_time=5117.041 buffer_time=2.224 print_stall=0 extruder: target=240 temp=240.2 pwm=0.338
Stats 799892.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=10588544 bytes_read=2198511 bytes_retransmit=9 bytes_invalid=0 send_seq=202688 receive_seq=202688 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=119992759 heater_bed: target=80 temp=80.0 pwm=0.430 sd_pos=1887437 sysload=0.37 cputime=293.797 memavail=7286744 print_time=5118.051 buffer_time=2.234 print_stall=0 extruder: target=240 temp=240.3 pwm=0.338
Stats 799893.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10590596 bytes_read=2199044 bytes_retransmit=9 bytes_invalid=0 send_seq=202733 receive_seq=202733 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119992748 heater_bed: target=80 temp=80.0 pwm=0.434 sd_pos=1887605 sysload=0.37 cputime=293.854 memavail=7286744 print_time=5119.095 buffer_time=2.277 print_stall=0 extruder: target=240 temp=239.9 pwm=0.553
Stats 799894.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10592090 bytes_read=2199507 bytes_retransmit=9 bytes_invalid=0 send_seq=202768 receive_seq=202768 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.471 sd_pos=1887744 sysload=0.37 cputime=293.918 memavail=7285660 print_time=5119.770 buffer_time=1.952 print_stall=0 extruder: target=240 temp=240.0 pwm=0.430
Stats 799895.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10597088 bytes_read=2200243 bytes_retransmit=9 bytes_invalid=0 send_seq=202861 receive_seq=202861 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992728 heater_bed: target=80 temp=80.0 pwm=0.492 sd_pos=1888569 sysload=0.37 cputime=294.005 memavail=7285712 print_time=5121.330 buffer_time=2.512 print_stall=0 extruder: target=240 temp=239.8 pwm=0.463
Stats 799896.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10598167 bytes_read=2200660 bytes_retransmit=9 bytes_invalid=0 send_seq=202887 receive_seq=202887 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992717 heater_bed: target=80 temp=80.0 pwm=0.368 sd_pos=1888597 sysload=0.43 cputime=294.061 memavail=7285712 print_time=5121.958 buffer_time=2.139 print_stall=0 extruder: target=240 temp=239.9 pwm=0.463
Stats 799897.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10599130 bytes_read=2201037 bytes_retransmit=9 bytes_invalid=0 send_seq=202910 receive_seq=202904 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992712 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=1888652 sysload=0.43 cputime=294.111 memavail=7285752 print_time=5123.154 buffer_time=2.335 print_stall=0 extruder: target=240 temp=239.8 pwm=0.463
Stats 799898.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10599832 bytes_read=2201456 bytes_retransmit=9 bytes_invalid=0 send_seq=202929 receive_seq=202929 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119992704 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=1888791 sysload=0.43 cputime=294.171 memavail=7284744 print_time=5124.094 buffer_time=2.275 print_stall=0 extruder: target=240 temp=240.0 pwm=0.463
Stats 799899.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10600489 bytes_read=2201839 bytes_retransmit=9 bytes_invalid=0 send_seq=202947 receive_seq=202947 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992697 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=1888848 sysload=0.43 cputime=294.226 memavail=7284744 print_time=5125.098 buffer_time=2.278 print_stall=0 extruder: target=240 temp=240.2 pwm=0.358
Stats 799900.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10601855 bytes_read=2202296 bytes_retransmit=9 bytes_invalid=0 send_seq=202980 receive_seq=202980 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=80 temp=80.0 pwm=0.357 sd_pos=1888944 sysload=0.43 cputime=294.294 memavail=7283736 print_time=5126.467 buffer_time=2.646 print_stall=0 extruder: target=240 temp=240.1 pwm=0.431
Stats 799901.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10603779 bytes_read=2202774 bytes_retransmit=9 bytes_invalid=0 send_seq=203020 receive_seq=203020 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992727 heater_bed: target=80 temp=80.0 pwm=0.498 sd_pos=1889104 sysload=0.55 cputime=294.354 memavail=7283736 print_time=5127.024 buffer_time=2.202 print_stall=0 extruder: target=240 temp=240.4 pwm=0.368
Stats 799902.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10606934 bytes_read=2203377 bytes_retransmit=9 bytes_invalid=0 send_seq=203082 receive_seq=203082 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=119992717 heater_bed: target=80 temp=80.0 pwm=0.326 sd_pos=1889380 sysload=0.55 cputime=294.422 memavail=7283736 print_time=5128.046 buffer_time=2.224 print_stall=0 extruder: target=240 temp=240.0 pwm=0.476
Stats 799903.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10608874 bytes_read=2203889 bytes_retransmit=9 bytes_invalid=0 send_seq=203123 receive_seq=203123 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992712 heater_bed: target=80 temp=80.0 pwm=0.439 sd_pos=1889545 sysload=0.55 cputime=294.484 memavail=7283736 print_time=5128.994 buffer_time=2.172 print_stall=0 extruder: target=240 temp=239.8 pwm=0.517
Stats 799904.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10610791 bytes_read=2204367 bytes_retransmit=9 bytes_invalid=0 send_seq=203163 receive_seq=203163 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992703 heater_bed: target=80 temp=80.0 pwm=0.363 sd_pos=1889710 sysload=0.55 cputime=294.550 memavail=7284476 print_time=5129.950 buffer_time=2.127 print_stall=0 extruder: target=240 temp=239.9 pwm=0.457
Stats 799905.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10612608 bytes_read=2204850 bytes_retransmit=9 bytes_invalid=0 send_seq=203201 receive_seq=203201 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=119992690 heater_bed: target=80 temp=80.0 pwm=0.453 sd_pos=1889877 sysload=0.55 cputime=294.608 memavail=7284492 print_time=5130.893 buffer_time=2.070 print_stall=0 extruder: target=240 temp=239.9 pwm=0.457
Stats 799906.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10614582 bytes_read=2205352 bytes_retransmit=9 bytes_invalid=0 send_seq=203243 receive_seq=203243 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992683 heater_bed: target=80 temp=80.0 pwm=0.398 sd_pos=1890043 sysload=0.59 cputime=294.674 memavail=7284492 print_time=5131.849 buffer_time=2.025 print_stall=0 extruder: target=240 temp=239.8 pwm=0.527
Stats 799907.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=10617015 bytes_read=2205880 bytes_retransmit=9 bytes_invalid=0 send_seq=203293 receive_seq=203293 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992678 heater_bed: target=80 temp=80.0 pwm=0.387 sd_pos=1890264 sysload=0.59 cputime=294.738 memavail=7284000 print_time=5133.114 buffer_time=2.290 print_stall=0 extruder: target=240 temp=240.0 pwm=0.439
Stats 799908.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10618921 bytes_read=2206393 bytes_retransmit=9 bytes_invalid=0 send_seq=203334 receive_seq=203334 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119992671 heater_bed: target=80 temp=80.1 pwm=0.442 sd_pos=1890429 sysload=0.59 cputime=294.805 memavail=7284000 print_time=5134.057 buffer_time=2.232 print_stall=0 extruder: target=240 temp=239.9 pwm=0.442
Stats 799909.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10620858 bytes_read=2206885 bytes_retransmit=9 bytes_invalid=0 send_seq=203374 receive_seq=203374 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992751 heater_bed: target=80 temp=80.1 pwm=0.388 sd_pos=1890594 sysload=0.59 cputime=294.874 memavail=7284000 print_time=5135.013 buffer_time=2.187 print_stall=0 extruder: target=240 temp=239.8 pwm=0.534
Stats 799910.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10622745 bytes_read=2207368 bytes_retransmit=9 bytes_invalid=0 send_seq=203415 receive_seq=203415 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=80 temp=80.0 pwm=0.459 sd_pos=1890761 sysload=0.59 cputime=294.933 memavail=7284256 print_time=5135.955 buffer_time=2.130 print_stall=0 extruder: target=240 temp=239.9 pwm=0.457
Stats 799911.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10624659 bytes_read=2207861 bytes_retransmit=9 bytes_invalid=0 send_seq=203455 receive_seq=203455 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992729 heater_bed: target=80 temp=80.1 pwm=0.386 sd_pos=1890927 sysload=0.54 cputime=294.993 memavail=7284256 print_time=5136.911 buffer_time=2.085 print_stall=0 extruder: target=240 temp=240.2 pwm=0.351
Stats 799912.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10628062 bytes_read=2208488 bytes_retransmit=9 bytes_invalid=0 send_seq=203522 receive_seq=203522 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=119992722 heater_bed: target=80 temp=80.1 pwm=0.344 sd_pos=1891256 sysload=0.54 cputime=295.058 memavail=7284256 print_time=5138.248 buffer_time=2.422 print_stall=0 extruder: target=240 temp=240.2 pwm=0.410
Stats 799913.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10629702 bytes_read=2208978 bytes_retransmit=9 bytes_invalid=0 send_seq=203559 receive_seq=203559 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992705 heater_bed: target=80 temp=80.1 pwm=0.344 sd_pos=1891542 sysload=0.54 cputime=295.121 memavail=7283768 print_time=5138.991 buffer_time=2.164 print_stall=0 extruder: target=240 temp=239.8 pwm=0.509
Stats 799914.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10630606 bytes_read=2209391 bytes_retransmit=9 bytes_invalid=0 send_seq=203583 receive_seq=203583 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992696 heater_bed: target=80 temp=80.1 pwm=0.341 sd_pos=1891586 sysload=0.54 cputime=295.188 memavail=7281780 print_time=5146.097 buffer_time=8.269 print_stall=0 extruder: target=240 temp=239.9 pwm=0.469
Stats 799915.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10630795 bytes_read=2209748 bytes_retransmit=9 bytes_invalid=0 send_seq=203596 receive_seq=203596 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992683 heater_bed: target=80 temp=80.1 pwm=0.313 sd_pos=1891586 sysload=0.54 cputime=295.240 memavail=7285884 print_time=5146.097 buffer_time=7.268 print_stall=0 extruder: target=240 temp=240.0 pwm=0.417
Stats 799916.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10631000 bytes_read=2210096 bytes_retransmit=9 bytes_invalid=0 send_seq=203610 receive_seq=203610 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992676 heater_bed: target=80 temp=80.1 pwm=0.353 sd_pos=1891586 sysload=0.50 cputime=295.301 memavail=7285700 print_time=5146.097 buffer_time=6.266 print_stall=0 extruder: target=240 temp=240.1 pwm=0.394
Stats 799917.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=10631226 bytes_read=2210469 bytes_retransmit=9 bytes_invalid=0 send_seq=203626 receive_seq=203626 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992667 heater_bed: target=80 temp=80.1 pwm=0.377 sd_pos=1891586 sysload=0.50 cputime=295.357 memavail=7285700 print_time=5146.097 buffer_time=5.266 print_stall=0 extruder: target=240 temp=238.9 pwm=0.936
Stats 799918.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=10631442 bytes_read=2210851 bytes_retransmit=9 bytes_invalid=0 send_seq=203641 receive_seq=203641 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992663 heater_bed: target=80 temp=80.1 pwm=0.435 sd_pos=1891586 sysload=0.50 cputime=295.418 memavail=7285700 print_time=5146.097 buffer_time=4.265 print_stall=0 extruder: target=240 temp=240.5 pwm=0.037
Stats 799919.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=10631604 bytes_read=2211189 bytes_retransmit=9 bytes_invalid=0 send_seq=203653 receive_seq=203653 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992661 heater_bed: target=80 temp=80.1 pwm=0.511 sd_pos=1891586 sysload=0.50 cputime=295.467 memavail=7285460 print_time=5146.097 buffer_time=3.264 print_stall=0 extruder: target=240 temp=241.0 pwm=0.037
Stats 799920.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=10631766 bytes_read=2211542 bytes_retransmit=9 bytes_invalid=0 send_seq=203665 receive_seq=203665 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992658 heater_bed: target=80 temp=80.0 pwm=0.511 sd_pos=1891586 sysload=0.50 cputime=295.512 memavail=7284732 print_time=5146.097 buffer_time=2.263 print_stall=0 extruder: target=240 temp=241.1 pwm=0.150
Unknown command:"M900"
Finished SD card print
Exiting SD card print (position 1902316)
Hyperlapse: frames stopped
Stats 799921.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=10632018 bytes_read=2211725 bytes_retransmit=9 bytes_invalid=0 send_seq=203672 receive_seq=203672 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992658 heater_bed: target=0 temp=80.0 pwm=0.000  sysload=0.46 cputime=295.597 memavail=7255784 print_time=5146.297 buffer_time=1.460 print_stall=0 extruder: target=0 temp=240.6 pwm=0.000
Stats 799922.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=10632024 bytes_read=2211828 bytes_retransmit=9 bytes_invalid=0 send_seq=203673 receive_seq=203673 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992654 heater_bed: target=0 temp=80.0 pwm=0.000  sysload=0.46 cputime=295.631 memavail=7187620 print_time=5146.297 buffer_time=0.460 print_stall=0 extruder: target=0 temp=240.1 pwm=0.000
Stats 799923.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=10632030 bytes_read=2211961 bytes_retransmit=9 bytes_invalid=0 send_seq=203674 receive_seq=203674 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992646 heater_bed: target=0 temp=80.0 pwm=0.000  sysload=0.46 cputime=295.663 memavail=7161020 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=239.4 pwm=0.000
Stats 799924.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=10632036 bytes_read=2212078 bytes_retransmit=9 bytes_invalid=0 send_seq=203675 receive_seq=203675 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992639 heater_bed: target=0 temp=80.0 pwm=0.000  sysload=0.46 cputime=295.702 memavail=7140504 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=237.9 pwm=0.000
Stats 799925.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=10632042 bytes_read=2212181 bytes_retransmit=9 bytes_invalid=0 send_seq=203676 receive_seq=203676 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992644 heater_bed: target=0 temp=79.9 pwm=0.000  sysload=0.46 cputime=295.736 memavail=7133808 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=237.1 pwm=0.000
Stats 799926.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=10632048 bytes_read=2212299 bytes_retransmit=9 bytes_invalid=0 send_seq=203677 receive_seq=203677 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992644 heater_bed: target=0 temp=79.9 pwm=0.000  sysload=0.58 cputime=295.778 memavail=7136256 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=236.2 pwm=0.000
Stats 799927.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000009 mcu_task_stddev=0.000008 bytes_write=10632054 bytes_read=2212416 bytes_retransmit=9 bytes_invalid=0 send_seq=203678 receive_seq=203678 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992638 heater_bed: target=0 temp=79.8 pwm=0.000  sysload=0.58 cputime=295.817 memavail=7133988 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=235.0 pwm=0.000
Stats 799928.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632060 bytes_read=2212533 bytes_retransmit=9 bytes_invalid=0 send_seq=203679 receive_seq=203679 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992632 heater_bed: target=0 temp=79.8 pwm=0.000  sysload=0.58 cputime=295.843 memavail=7132496 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=233.9 pwm=0.000
Stats 799929.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632066 bytes_read=2212651 bytes_retransmit=9 bytes_invalid=0 send_seq=203680 receive_seq=203680 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992626 heater_bed: target=0 temp=79.8 pwm=0.000  sysload=0.58 cputime=295.877 memavail=7132392 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=233.1 pwm=0.000
Stats 799930.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632072 bytes_read=2212761 bytes_retransmit=9 bytes_invalid=0 send_seq=203681 receive_seq=203681 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992624 heater_bed: target=0 temp=79.8 pwm=0.000  sysload=0.58 cputime=295.911 memavail=7131240 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=231.9 pwm=0.000
Stats 799931.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632078 bytes_read=2212857 bytes_retransmit=9 bytes_invalid=0 send_seq=203682 receive_seq=203682 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992623 heater_bed: target=0 temp=79.7 pwm=0.000  sysload=0.77 cputime=295.936 memavail=7125104 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=231.0 pwm=0.000
Stats 799932.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632084 bytes_read=2212970 bytes_retransmit=9 bytes_invalid=0 send_seq=203683 receive_seq=203683 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992617 heater_bed: target=0 temp=79.6 pwm=0.000  sysload=0.77 cputime=295.956 memavail=7123700 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=230.0 pwm=0.000
Stats 799933.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632090 bytes_read=2213101 bytes_retransmit=9 bytes_invalid=0 send_seq=203684 receive_seq=203684 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992613 heater_bed: target=0 temp=79.6 pwm=0.000  sysload=0.77 cputime=295.985 memavail=7123452 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=228.9 pwm=0.000
Stats 799934.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632096 bytes_read=2213204 bytes_retransmit=9 bytes_invalid=0 send_seq=203685 receive_seq=203685 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992621 heater_bed: target=0 temp=79.4 pwm=0.000  sysload=0.77 cputime=296.014 memavail=7129996 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=227.9 pwm=0.000
Stats 799935.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632102 bytes_read=2213322 bytes_retransmit=9 bytes_invalid=0 send_seq=203686 receive_seq=203686 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992621 heater_bed: target=0 temp=79.3 pwm=0.000  sysload=0.77 cputime=296.046 memavail=7130104 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=227.1 pwm=0.000
Stats 799936.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632108 bytes_read=2213439 bytes_retransmit=9 bytes_invalid=0 send_seq=203687 receive_seq=203687 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992617 heater_bed: target=0 temp=79.2 pwm=0.000  sysload=0.87 cputime=296.064 memavail=7130104 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=225.9 pwm=0.000
Stats 799937.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632114 bytes_read=2213542 bytes_retransmit=9 bytes_invalid=0 send_seq=203688 receive_seq=203688 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992615 heater_bed: target=0 temp=79.2 pwm=0.000  sysload=0.87 cputime=296.093 memavail=7129840 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=225.1 pwm=0.000
Stats 799938.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632120 bytes_read=2213674 bytes_retransmit=9 bytes_invalid=0 send_seq=203689 receive_seq=203689 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992610 heater_bed: target=0 temp=79.1 pwm=0.000  sysload=0.87 cputime=296.117 memavail=7129736 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=224.3 pwm=0.000
Stats 799939.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632126 bytes_read=2213791 bytes_retransmit=9 bytes_invalid=0 send_seq=203690 receive_seq=203690 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992619 heater_bed: target=0 temp=79.1 pwm=0.000  sysload=0.87 cputime=296.161 memavail=7129620 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=223.2 pwm=0.000
Stats 799940.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632132 bytes_read=2213894 bytes_retransmit=9 bytes_invalid=0 send_seq=203691 receive_seq=203691 retransmit_seq=17 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992619 heater_bed: target=0 temp=79.0 pwm=0.000  sysload=0.87 cputime=296.193 memavail=7129292 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=222.4 pwm=0.000
Stats 799941.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632138 bytes_read=2214012 bytes_retransmit=9 bytes_invalid=0 send_seq=203692 receive_seq=203692 retransmit_seq=17 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992615 heater_bed: target=0 temp=78.8 pwm=0.000  sysload=1.04 cputime=296.214 memavail=7129652 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=221.7 pwm=0.000
Stats 799942.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632144 bytes_read=2214129 bytes_retransmit=9 bytes_invalid=0 send_seq=203693 receive_seq=203693 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992611 heater_bed: target=0 temp=78.7 pwm=0.000  sysload=1.04 cputime=296.249 memavail=7129652 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=220.5 pwm=0.000
Stats 799943.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632150 bytes_read=2214246 bytes_retransmit=9 bytes_invalid=0 send_seq=203694 receive_seq=203694 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992610 heater_bed: target=0 temp=78.6 pwm=0.000  sysload=1.04 cputime=296.278 memavail=7129548 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.9 pwm=0.000
Stats 799944.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632156 bytes_read=2214364 bytes_retransmit=9 bytes_invalid=0 send_seq=203695 receive_seq=203695 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992622 heater_bed: target=0 temp=78.5 pwm=0.000  sysload=1.04 cputime=296.331 memavail=7129400 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.1 pwm=0.000
Stats 799945.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632162 bytes_read=2214481 bytes_retransmit=9 bytes_invalid=0 send_seq=203696 receive_seq=203696 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992660 heater_bed: target=0 temp=78.4 pwm=0.000  sysload=1.04 cputime=296.390 memavail=7129436 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=218.0 pwm=0.000
Stats 799946.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632168 bytes_read=2214584 bytes_retransmit=9 bytes_invalid=0 send_seq=203697 receive_seq=203697 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992654 heater_bed: target=0 temp=78.3 pwm=0.000  sysload=1.12 cputime=296.412 memavail=7129332 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=217.2 pwm=0.000
Stats 799947.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632174 bytes_read=2214702 bytes_retransmit=9 bytes_invalid=0 send_seq=203698 receive_seq=203698 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992647 heater_bed: target=0 temp=78.2 pwm=0.000  sysload=1.12 cputime=296.456 memavail=7129424 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=216.4 pwm=0.000
Stats 799948.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632180 bytes_read=2214833 bytes_retransmit=9 bytes_invalid=0 send_seq=203699 receive_seq=203699 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992662 heater_bed: target=0 temp=78.0 pwm=0.000  sysload=1.12 cputime=296.503 memavail=7129320 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=215.5 pwm=0.000
Stats 799949.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632186 bytes_read=2214936 bytes_retransmit=9 bytes_invalid=0 send_seq=203700 receive_seq=203700 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992655 heater_bed: target=0 temp=77.9 pwm=0.000  sysload=1.12 cputime=296.534 memavail=7129412 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=214.7 pwm=0.000
Stats 799950.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632192 bytes_read=2215054 bytes_retransmit=9 bytes_invalid=0 send_seq=203701 receive_seq=203701 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992655 heater_bed: target=0 temp=77.8 pwm=0.000  sysload=1.12 cputime=296.582 memavail=7128392 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=213.8 pwm=0.000
Stats 799951.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632198 bytes_read=2215171 bytes_retransmit=9 bytes_invalid=0 send_seq=203702 receive_seq=203702 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992649 heater_bed: target=0 temp=77.7 pwm=0.000  sysload=1.27 cputime=296.622 memavail=7128436 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=212.8 pwm=0.000
Stats 799952.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632204 bytes_read=2215274 bytes_retransmit=9 bytes_invalid=0 send_seq=203703 receive_seq=203703 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992643 heater_bed: target=0 temp=77.6 pwm=0.000  sysload=1.27 cputime=296.654 memavail=7128452 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=212.2 pwm=0.000
Stats 799953.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632210 bytes_read=2215406 bytes_retransmit=9 bytes_invalid=0 send_seq=203704 receive_seq=203704 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992637 heater_bed: target=0 temp=77.3 pwm=0.000  sysload=1.27 cputime=296.688 memavail=7128452 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=211.5 pwm=0.000
Stats 799954.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632216 bytes_read=2215523 bytes_retransmit=9 bytes_invalid=0 send_seq=203705 receive_seq=203705 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992648 heater_bed: target=0 temp=77.2 pwm=0.000  sysload=1.27 cputime=296.713 memavail=7128456 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=210.6 pwm=0.000
Stats 799955.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632222 bytes_read=2215626 bytes_retransmit=9 bytes_invalid=0 send_seq=203706 receive_seq=203706 retransmit_seq=17 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992648 heater_bed: target=0 temp=77.0 pwm=0.000  sysload=1.27 cputime=296.747 memavail=7128604 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=209.7 pwm=0.000
Stats 799956.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632228 bytes_read=2215758 bytes_retransmit=9 bytes_invalid=0 send_seq=203707 receive_seq=203707 retransmit_seq=17 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992642 heater_bed: target=0 temp=76.8 pwm=0.000  sysload=1.41 cputime=296.781 memavail=7128712 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=208.8 pwm=0.000
Stats 799957.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632234 bytes_read=2215861 bytes_retransmit=9 bytes_invalid=0 send_seq=203708 receive_seq=203708 retransmit_seq=17 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992637 heater_bed: target=0 temp=76.6 pwm=0.000  sysload=1.41 cputime=296.818 memavail=7128384 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=208.1 pwm=0.000
Stats 799958.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632240 bytes_read=2215978 bytes_retransmit=9 bytes_invalid=0 send_seq=203709 receive_seq=203709 retransmit_seq=17 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992631 heater_bed: target=0 temp=76.5 pwm=0.000  sysload=1.41 cputime=296.845 memavail=7128464 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=207.5 pwm=0.000
Stats 799959.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632246 bytes_read=2216110 bytes_retransmit=9 bytes_invalid=0 send_seq=203710 receive_seq=203710 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992638 heater_bed: target=0 temp=76.3 pwm=0.000  sysload=1.41 cputime=296.881 memavail=7128452 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=206.5 pwm=0.000
Stats 799960.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632252 bytes_read=2216213 bytes_retransmit=9 bytes_invalid=0 send_seq=203711 receive_seq=203711 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992633 heater_bed: target=0 temp=76.1 pwm=0.000  sysload=1.41 cputime=296.916 memavail=7127684 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=205.8 pwm=0.000
Stats 799961.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632258 bytes_read=2216316 bytes_retransmit=9 bytes_invalid=0 send_seq=203712 receive_seq=203712 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992628 heater_bed: target=0 temp=75.9 pwm=0.000  sysload=1.54 cputime=296.939 memavail=7287828 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=205.1 pwm=0.000
Stats 799962.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632264 bytes_read=2216448 bytes_retransmit=9 bytes_invalid=0 send_seq=203713 receive_seq=203713 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992623 heater_bed: target=0 temp=75.7 pwm=0.000  sysload=1.54 cputime=296.960 memavail=7287828 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=204.2 pwm=0.000
Stats 799963.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632270 bytes_read=2216565 bytes_retransmit=9 bytes_invalid=0 send_seq=203714 receive_seq=203714 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992618 heater_bed: target=0 temp=75.6 pwm=0.000  sysload=1.54 cputime=296.990 memavail=7287828 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=203.5 pwm=0.000
Stats 799964.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632276 bytes_read=2216668 bytes_retransmit=9 bytes_invalid=0 send_seq=203715 receive_seq=203715 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992666 heater_bed: target=0 temp=75.5 pwm=0.000  sysload=1.54 cputime=297.017 memavail=7287324 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=202.7 pwm=0.000
Stats 799965.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632282 bytes_read=2216800 bytes_retransmit=9 bytes_invalid=0 send_seq=203716 receive_seq=203716 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992659 heater_bed: target=0 temp=75.3 pwm=0.000  sysload=1.54 cputime=297.044 memavail=7287324 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.9 pwm=0.000
Stats 799966.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632288 bytes_read=2216896 bytes_retransmit=9 bytes_invalid=0 send_seq=203717 receive_seq=203717 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992652 heater_bed: target=0 temp=75.2 pwm=0.000  sysload=1.41 cputime=297.067 memavail=7287324 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.1 pwm=0.000
Stats 799967.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632294 bytes_read=2216992 bytes_retransmit=9 bytes_invalid=0 send_seq=203718 receive_seq=203718 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992649 heater_bed: target=0 temp=75.0 pwm=0.000  sysload=1.41 cputime=297.088 memavail=7287324 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=200.5 pwm=0.000
Stats 799968.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632300 bytes_read=2217135 bytes_retransmit=9 bytes_invalid=0 send_seq=203719 receive_seq=203719 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992672 heater_bed: target=0 temp=74.9 pwm=0.000  sysload=1.41 cputime=297.110 memavail=7287324 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.4 pwm=0.000
Stats 799969.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632306 bytes_read=2217238 bytes_retransmit=9 bytes_invalid=0 send_seq=203720 receive_seq=203720 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992668 heater_bed: target=0 temp=74.8 pwm=0.000  sysload=1.41 cputime=297.133 memavail=7287324 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.8 pwm=0.000
Stats 799970.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632312 bytes_read=2217341 bytes_retransmit=9 bytes_invalid=0 send_seq=203721 receive_seq=203721 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992661 heater_bed: target=0 temp=74.7 pwm=0.000  sysload=1.41 cputime=297.158 memavail=7286568 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.2 pwm=0.000
Stats 799971.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632318 bytes_read=2217473 bytes_retransmit=9 bytes_invalid=0 send_seq=203722 receive_seq=203722 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992657 heater_bed: target=0 temp=74.5 pwm=0.000  sysload=1.30 cputime=297.180 memavail=7286572 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.3 pwm=0.000
Stats 799972.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632324 bytes_read=2217576 bytes_retransmit=9 bytes_invalid=0 send_seq=203723 receive_seq=203723 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992655 heater_bed: target=0 temp=74.4 pwm=0.000  sysload=1.30 cputime=297.201 memavail=7286572 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.7 pwm=0.000
Stats 799973.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632330 bytes_read=2217693 bytes_retransmit=9 bytes_invalid=0 send_seq=203724 receive_seq=203724 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992651 heater_bed: target=0 temp=74.4 pwm=0.000  sysload=1.30 cputime=297.219 memavail=7286572 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.9 pwm=0.000
Stats 799974.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632336 bytes_read=2217825 bytes_retransmit=9 bytes_invalid=0 send_seq=203725 receive_seq=203725 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992648 heater_bed: target=0 temp=74.2 pwm=0.000  sysload=1.30 cputime=297.242 memavail=7286572 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.1 pwm=0.000
Stats 799975.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632342 bytes_read=2217928 bytes_retransmit=9 bytes_invalid=0 send_seq=203726 receive_seq=203726 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992647 heater_bed: target=0 temp=74.2 pwm=0.000  sysload=1.30 cputime=297.273 memavail=7286572 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.4 pwm=0.000
Stats 799976.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632348 bytes_read=2218031 bytes_retransmit=9 bytes_invalid=0 send_seq=203727 receive_seq=203727 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992648 heater_bed: target=0 temp=74.1 pwm=0.000  sysload=1.20 cputime=297.300 memavail=7285312 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.8 pwm=0.000
Stats 799977.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632360 bytes_read=2218179 bytes_retransmit=9 bytes_invalid=0 send_seq=203729 receive_seq=203729 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992658 heater_bed: target=0 temp=73.9 pwm=0.000  sysload=1.20 cputime=297.330 memavail=7286052 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.0 pwm=0.000
Stats 799978.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632366 bytes_read=2218296 bytes_retransmit=9 bytes_invalid=0 send_seq=203730 receive_seq=203730 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992655 heater_bed: target=0 temp=73.9 pwm=0.000  sysload=1.20 cputime=297.356 memavail=7286068 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=192.3 pwm=0.000
Stats 799979.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632372 bytes_read=2218414 bytes_retransmit=9 bytes_invalid=0 send_seq=203731 receive_seq=203731 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992650 heater_bed: target=0 temp=73.7 pwm=0.000  sysload=1.20 cputime=297.391 memavail=7279256 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.6 pwm=0.000
Stats 799980.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632378 bytes_read=2218531 bytes_retransmit=9 bytes_invalid=0 send_seq=203732 receive_seq=203732 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992644 heater_bed: target=0 temp=73.7 pwm=0.000  sysload=1.20 cputime=297.412 memavail=7286500 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.8 pwm=0.000
Stats 799981.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632384 bytes_read=2218634 bytes_retransmit=9 bytes_invalid=0 send_seq=203733 receive_seq=203733 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992702 heater_bed: target=0 temp=73.6 pwm=0.000  sysload=1.10 cputime=297.434 memavail=7286516 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.2 pwm=0.000
Stats 799982.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632390 bytes_read=2218752 bytes_retransmit=9 bytes_invalid=0 send_seq=203734 receive_seq=203734 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992696 heater_bed: target=0 temp=73.5 pwm=0.000  sysload=1.10 cputime=297.451 memavail=7286044 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.5 pwm=0.000
Stats 799983.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632396 bytes_read=2218883 bytes_retransmit=9 bytes_invalid=0 send_seq=203735 receive_seq=203735 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992687 heater_bed: target=0 temp=73.4 pwm=0.000  sysload=1.10 cputime=297.462 memavail=7284548 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.7 pwm=0.000
Stats 799984.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632402 bytes_read=2218986 bytes_retransmit=9 bytes_invalid=0 send_seq=203736 receive_seq=203736 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992685 heater_bed: target=0 temp=73.3 pwm=0.000  sysload=1.10 cputime=297.486 memavail=7284548 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.1 pwm=0.000
Stats 799985.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632408 bytes_read=2219104 bytes_retransmit=9 bytes_invalid=0 send_seq=203737 receive_seq=203737 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992699 heater_bed: target=0 temp=73.1 pwm=0.000  sysload=1.10 cputime=297.506 memavail=7288328 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.5 pwm=0.000
Stats 799986.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632414 bytes_read=2219221 bytes_retransmit=9 bytes_invalid=0 send_seq=203738 receive_seq=203738 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992703 heater_bed: target=0 temp=73.0 pwm=0.000  sysload=1.01 cputime=297.523 memavail=7288328 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.7 pwm=0.000
Stats 799987.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632420 bytes_read=2219324 bytes_retransmit=9 bytes_invalid=0 send_seq=203739 receive_seq=203739 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992698 heater_bed: target=0 temp=73.0 pwm=0.000  sysload=1.01 cputime=297.547 memavail=7288328 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.0 pwm=0.000
Stats 799988.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632426 bytes_read=2219456 bytes_retransmit=9 bytes_invalid=0 send_seq=203740 receive_seq=203740 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992695 heater_bed: target=0 temp=72.9 pwm=0.000  sysload=1.01 cputime=297.573 memavail=7288104 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.5 pwm=0.000
Stats 799989.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632432 bytes_read=2219573 bytes_retransmit=9 bytes_invalid=0 send_seq=203741 receive_seq=203741 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992693 heater_bed: target=0 temp=72.9 pwm=0.000  sysload=1.01 cputime=297.594 memavail=7288104 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.7 pwm=0.000
Stats 799990.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632438 bytes_read=2219676 bytes_retransmit=9 bytes_invalid=0 send_seq=203742 receive_seq=203742 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992688 heater_bed: target=0 temp=72.8 pwm=0.000  sysload=1.01 cputime=297.612 memavail=7287628 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.2 pwm=0.000
Stats 799991.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632444 bytes_read=2219794 bytes_retransmit=9 bytes_invalid=0 send_seq=203743 receive_seq=203743 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992686 heater_bed: target=0 temp=72.7 pwm=0.000  sysload=0.93 cputime=297.629 memavail=7287640 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=183.5 pwm=0.000
Stats 799992.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632450 bytes_read=2219911 bytes_retransmit=9 bytes_invalid=0 send_seq=203744 receive_seq=203744 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992681 heater_bed: target=0 temp=72.6 pwm=0.000  sysload=0.93 cputime=297.650 memavail=7287640 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=182.7 pwm=0.000
Stats 799993.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632456 bytes_read=2220014 bytes_retransmit=9 bytes_invalid=0 send_seq=203745 receive_seq=203745 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992675 heater_bed: target=0 temp=72.6 pwm=0.000  sysload=0.93 cputime=297.673 memavail=7287164 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=182.1 pwm=0.000
Stats 799994.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632462 bytes_read=2220146 bytes_retransmit=9 bytes_invalid=0 send_seq=203746 receive_seq=203746 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992720 heater_bed: target=0 temp=72.5 pwm=0.000  sysload=0.93 cputime=297.697 memavail=7287164 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=181.6 pwm=0.000
Stats 799995.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632468 bytes_read=2220263 bytes_retransmit=9 bytes_invalid=0 send_seq=203747 receive_seq=203747 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992711 heater_bed: target=0 temp=72.4 pwm=0.000  sysload=0.93 cputime=297.714 memavail=7287164 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=180.8 pwm=0.000
Stats 799996.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632474 bytes_read=2220366 bytes_retransmit=9 bytes_invalid=0 send_seq=203748 receive_seq=203748 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992714 heater_bed: target=0 temp=72.3 pwm=0.000  sysload=0.86 cputime=297.739 memavail=7287164 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=180.2 pwm=0.000
Stats 799997.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632480 bytes_read=2220484 bytes_retransmit=9 bytes_invalid=0 send_seq=203749 receive_seq=203749 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992705 heater_bed: target=0 temp=72.2 pwm=0.000  sysload=0.86 cputime=297.759 memavail=7286912 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=179.7 pwm=0.000
Stats 799998.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632486 bytes_read=2220601 bytes_retransmit=9 bytes_invalid=0 send_seq=203750 receive_seq=203750 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992700 heater_bed: target=0 temp=72.2 pwm=0.000  sysload=0.86 cputime=297.781 memavail=7286660 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=179.0 pwm=0.000
Stats 799999.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632492 bytes_read=2220718 bytes_retransmit=9 bytes_invalid=0 send_seq=203751 receive_seq=203751 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992694 heater_bed: target=0 temp=72.1 pwm=0.000  sysload=0.86 cputime=297.799 memavail=7286664 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.4 pwm=0.000
Stats 800000.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632498 bytes_read=2220836 bytes_retransmit=9 bytes_invalid=0 send_seq=203752 receive_seq=203752 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992689 heater_bed: target=0 temp=72.1 pwm=0.000  sysload=0.86 cputime=297.816 memavail=7286412 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.8 pwm=0.000
Stats 800001.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632504 bytes_read=2220951 bytes_retransmit=9 bytes_invalid=0 send_seq=203753 receive_seq=203753 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992685 heater_bed: target=0 temp=72.0 pwm=0.000  sysload=0.79 cputime=297.839 memavail=7286920 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.1 pwm=0.000
Stats 800002.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632510 bytes_read=2221047 bytes_retransmit=9 bytes_invalid=0 send_seq=203754 receive_seq=203754 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992683 heater_bed: target=0 temp=71.9 pwm=0.000  sysload=0.79 cputime=297.858 memavail=7286920 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=176.5 pwm=0.000
Stats 800003.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632516 bytes_read=2221157 bytes_retransmit=9 bytes_invalid=0 send_seq=203755 receive_seq=203755 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=0 temp=71.9 pwm=0.000  sysload=0.79 cputime=297.879 memavail=7287080 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=176.0 pwm=0.000
Stats 800004.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632522 bytes_read=2221288 bytes_retransmit=9 bytes_invalid=0 send_seq=203756 receive_seq=203756 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=0 temp=71.8 pwm=0.000  sysload=0.79 cputime=297.895 memavail=7287176 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.3 pwm=0.000
Stats 800005.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632528 bytes_read=2221391 bytes_retransmit=9 bytes_invalid=0 send_seq=203757 receive_seq=203757 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992724 heater_bed: target=0 temp=71.8 pwm=0.000  sysload=0.79 cputime=297.911 memavail=7287176 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=174.7 pwm=0.000
Stats 800006.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632534 bytes_read=2221509 bytes_retransmit=9 bytes_invalid=0 send_seq=203758 receive_seq=203758 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 heater_bed: target=0 temp=71.7 pwm=0.000  sysload=0.72 cputime=297.933 memavail=7287176 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=174.2 pwm=0.000
Stats 800007.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632540 bytes_read=2221626 bytes_retransmit=9 bytes_invalid=0 send_seq=203759 receive_seq=203759 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992721 heater_bed: target=0 temp=71.6 pwm=0.000  sysload=0.72 cputime=297.954 memavail=7287176 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.5 pwm=0.000
Stats 800008.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632546 bytes_read=2221729 bytes_retransmit=9 bytes_invalid=0 send_seq=203760 receive_seq=203760 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992713 heater_bed: target=0 temp=71.6 pwm=0.000  sysload=0.72 cputime=297.973 memavail=7286952 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.0 pwm=0.000
Stats 800009.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632552 bytes_read=2221861 bytes_retransmit=9 bytes_invalid=0 send_seq=203761 receive_seq=203761 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992707 heater_bed: target=0 temp=71.5 pwm=0.000  sysload=0.72 cputime=297.992 memavail=7286952 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=172.5 pwm=0.000
Stats 800010.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632558 bytes_read=2221978 bytes_retransmit=9 bytes_invalid=0 send_seq=203762 receive_seq=203762 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992702 heater_bed: target=0 temp=71.4 pwm=0.000  sysload=0.72 cputime=298.016 memavail=7286700 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=171.8 pwm=0.000
Stats 800011.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632564 bytes_read=2222081 bytes_retransmit=9 bytes_invalid=0 send_seq=203763 receive_seq=203763 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992698 heater_bed: target=0 temp=71.4 pwm=0.000  sysload=0.66 cputime=298.036 memavail=7286852 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=171.3 pwm=0.000
Stats 800012.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632570 bytes_read=2222199 bytes_retransmit=9 bytes_invalid=0 send_seq=203764 receive_seq=203764 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=0 temp=71.3 pwm=0.000  sysload=0.66 cputime=298.063 memavail=7286956 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.8 pwm=0.000
Stats 800013.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632576 bytes_read=2222316 bytes_retransmit=9 bytes_invalid=0 send_seq=203765 receive_seq=203765 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992724 heater_bed: target=0 temp=71.2 pwm=0.000  sysload=0.66 cputime=298.081 memavail=7286956 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.1 pwm=0.000
Stats 800014.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632582 bytes_read=2222433 bytes_retransmit=9 bytes_invalid=0 send_seq=203766 receive_seq=203766 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992718 heater_bed: target=0 temp=71.2 pwm=0.000  sysload=0.66 cputime=298.099 memavail=7286956 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.6 pwm=0.000
Stats 800015.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632588 bytes_read=2222551 bytes_retransmit=9 bytes_invalid=0 send_seq=203767 receive_seq=203767 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992714 heater_bed: target=0 temp=71.1 pwm=0.000  sysload=0.66 cputime=298.123 memavail=7286956 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.1 pwm=0.000
Stats 800016.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632594 bytes_read=2222668 bytes_retransmit=9 bytes_invalid=0 send_seq=203768 receive_seq=203768 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992707 heater_bed: target=0 temp=71.0 pwm=0.000  sysload=0.61 cputime=298.148 memavail=7286956 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=168.4 pwm=0.000
Stats 800017.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632600 bytes_read=2222771 bytes_retransmit=9 bytes_invalid=0 send_seq=203769 receive_seq=203769 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992702 heater_bed: target=0 temp=71.0 pwm=0.000  sysload=0.61 cputime=298.166 memavail=7286956 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=168.0 pwm=0.000
Stats 800018.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632606 bytes_read=2222889 bytes_retransmit=9 bytes_invalid=0 send_seq=203770 receive_seq=203770 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992697 heater_bed: target=0 temp=70.9 pwm=0.000  sysload=0.61 cputime=298.186 memavail=7286956 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=167.4 pwm=0.000
Stats 800019.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632612 bytes_read=2223020 bytes_retransmit=9 bytes_invalid=0 send_seq=203771 receive_seq=203771 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992692 heater_bed: target=0 temp=70.9 pwm=0.000  sysload=0.61 cputime=298.212 memavail=7286960 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.8 pwm=0.000
Stats 800020.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632618 bytes_read=2223123 bytes_retransmit=9 bytes_invalid=0 send_seq=203772 receive_seq=203772 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992688 heater_bed: target=0 temp=70.8 pwm=0.000  sysload=0.61 cputime=298.238 memavail=7286960 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.3 pwm=0.000
Stats 800021.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632624 bytes_read=2223241 bytes_retransmit=9 bytes_invalid=0 send_seq=203773 receive_seq=203773 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=0 temp=70.8 pwm=0.000  sysload=0.64 cputime=298.264 memavail=7286960 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.8 pwm=0.000
Stats 800022.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632630 bytes_read=2223358 bytes_retransmit=9 bytes_invalid=0 send_seq=203774 receive_seq=203774 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992732 heater_bed: target=0 temp=70.7 pwm=0.000  sysload=0.64 cputime=298.286 memavail=7286960 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.2 pwm=0.000
Stats 800023.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632636 bytes_read=2223461 bytes_retransmit=9 bytes_invalid=0 send_seq=203775 receive_seq=203775 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992722 heater_bed: target=0 temp=70.7 pwm=0.000  sysload=0.64 cputime=298.301 memavail=7286960 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=164.7 pwm=0.000
Stats 800024.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632642 bytes_read=2223593 bytes_retransmit=9 bytes_invalid=0 send_seq=203776 receive_seq=203776 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992717 heater_bed: target=0 temp=70.6 pwm=0.000  sysload=0.64 cputime=298.326 memavail=7286964 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=164.3 pwm=0.000
Stats 800025.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632648 bytes_read=2223710 bytes_retransmit=9 bytes_invalid=0 send_seq=203777 receive_seq=203777 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992743 heater_bed: target=0 temp=70.5 pwm=0.000  sysload=0.64 cputime=298.352 memavail=7286964 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.6 pwm=0.000
Stats 800026.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632654 bytes_read=2223813 bytes_retransmit=9 bytes_invalid=0 send_seq=203778 receive_seq=203778 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992736 heater_bed: target=0 temp=70.5 pwm=0.000  sysload=0.59 cputime=298.372 memavail=7286964 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.1 pwm=0.000
Stats 800027.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632660 bytes_read=2223931 bytes_retransmit=9 bytes_invalid=0 send_seq=203779 receive_seq=203779 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992729 heater_bed: target=0 temp=70.4 pwm=0.000  sysload=0.59 cputime=298.390 memavail=7286964 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.6 pwm=0.000
Stats 800028.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632666 bytes_read=2224048 bytes_retransmit=9 bytes_invalid=0 send_seq=203780 receive_seq=203780 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992722 heater_bed: target=0 temp=70.4 pwm=0.000  sysload=0.59 cputime=298.415 memavail=7286964 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.0 pwm=0.000
Stats 800029.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632672 bytes_read=2224165 bytes_retransmit=9 bytes_invalid=0 send_seq=203781 receive_seq=203781 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992723 heater_bed: target=0 temp=70.3 pwm=0.000  sysload=0.59 cputime=298.436 memavail=7286964 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.5 pwm=0.000
Stats 800030.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632678 bytes_read=2224283 bytes_retransmit=9 bytes_invalid=0 send_seq=203782 receive_seq=203782 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=0 temp=70.2 pwm=0.000  sysload=0.59 cputime=298.457 memavail=7286712 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.1 pwm=0.000
Stats 800031.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632684 bytes_read=2224400 bytes_retransmit=9 bytes_invalid=0 send_seq=203783 receive_seq=203783 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=0 temp=70.2 pwm=0.000  sysload=0.54 cputime=298.482 memavail=7286964 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.5 pwm=0.000
Stats 800032.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632690 bytes_read=2224503 bytes_retransmit=9 bytes_invalid=0 send_seq=203784 receive_seq=203784 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=0 temp=70.1 pwm=0.000  sysload=0.54 cputime=298.515 memavail=7286964 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.0 pwm=0.000
Stats 800033.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632696 bytes_read=2224621 bytes_retransmit=9 bytes_invalid=0 send_seq=203785 receive_seq=203785 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=0 temp=70.1 pwm=0.000  sysload=0.54 cputime=298.544 memavail=7286740 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=159.5 pwm=0.000
Stats 800034.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632702 bytes_read=2224752 bytes_retransmit=9 bytes_invalid=0 send_seq=203786 receive_seq=203786 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=0 temp=70.0 pwm=0.000  sysload=0.54 cputime=298.579 memavail=7286744 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=159.0 pwm=0.000
Stats 800035.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632708 bytes_read=2224855 bytes_retransmit=9 bytes_invalid=0 send_seq=203787 receive_seq=203787 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992759 heater_bed: target=0 temp=70.0 pwm=0.000  sysload=0.54 cputime=298.608 memavail=7286744 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.5 pwm=0.000
Stats 800036.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632714 bytes_read=2224973 bytes_retransmit=9 bytes_invalid=0 send_seq=203788 receive_seq=203788 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=0 temp=69.9 pwm=0.000  sysload=0.50 cputime=298.635 memavail=7286744 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.1 pwm=0.000
Stats 800037.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632720 bytes_read=2225087 bytes_retransmit=9 bytes_invalid=0 send_seq=203789 receive_seq=203789 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992736 heater_bed: target=0 temp=69.8 pwm=0.000  sysload=0.50 cputime=298.656 memavail=7286744 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.5 pwm=0.000
Stats 800038.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632732 bytes_read=2225198 bytes_retransmit=9 bytes_invalid=0 send_seq=203791 receive_seq=203791 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992718 heater_bed: target=0 temp=69.8 pwm=0.000  sysload=0.50 cputime=298.676 memavail=7286744 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.1 pwm=0.000
Stats 800039.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632738 bytes_read=2225323 bytes_retransmit=9 bytes_invalid=0 send_seq=203792 receive_seq=203792 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992712 heater_bed: target=0 temp=69.7 pwm=0.000  sysload=0.50 cputime=298.694 memavail=7286744 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.6 pwm=0.000
Stats 800040.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632744 bytes_read=2225440 bytes_retransmit=9 bytes_invalid=0 send_seq=203793 receive_seq=203793 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992706 heater_bed: target=0 temp=69.7 pwm=0.000  sysload=0.50 cputime=298.711 memavail=7287232 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.0 pwm=0.000
Stats 800041.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632750 bytes_read=2225543 bytes_retransmit=9 bytes_invalid=0 send_seq=203794 receive_seq=203794 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992704 heater_bed: target=0 temp=69.6 pwm=0.000  sysload=0.46 cputime=298.726 memavail=7287248 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.6 pwm=0.000
Stats 800042.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632756 bytes_read=2225661 bytes_retransmit=9 bytes_invalid=0 send_seq=203795 receive_seq=203795 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 heater_bed: target=0 temp=69.5 pwm=0.000  sysload=0.46 cputime=298.752 memavail=7287248 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.1 pwm=0.000
Stats 800043.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632762 bytes_read=2225778 bytes_retransmit=9 bytes_invalid=0 send_seq=203796 receive_seq=203796 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992717 heater_bed: target=0 temp=69.5 pwm=0.000  sysload=0.46 cputime=298.771 memavail=7285496 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.5 pwm=0.000
Stats 800044.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632768 bytes_read=2225895 bytes_retransmit=9 bytes_invalid=0 send_seq=203797 receive_seq=203797 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992708 heater_bed: target=0 temp=69.4 pwm=0.000  sysload=0.46 cputime=298.792 memavail=7285496 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.1 pwm=0.000
Stats 800045.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632774 bytes_read=2226013 bytes_retransmit=9 bytes_invalid=0 send_seq=203798 receive_seq=203798 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992706 heater_bed: target=0 temp=69.4 pwm=0.000  sysload=0.46 cputime=298.820 memavail=7285496 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.7 pwm=0.000
Stats 800046.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632780 bytes_read=2226130 bytes_retransmit=9 bytes_invalid=0 send_seq=203799 receive_seq=203799 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992697 heater_bed: target=0 temp=69.3 pwm=0.000  sysload=0.42 cputime=298.838 memavail=7285748 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.1 pwm=0.000
Stats 800047.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632786 bytes_read=2226233 bytes_retransmit=9 bytes_invalid=0 send_seq=203800 receive_seq=203800 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=0 temp=69.3 pwm=0.000  sysload=0.42 cputime=298.868 memavail=7285748 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.7 pwm=0.000
Stats 800048.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632792 bytes_read=2226351 bytes_retransmit=9 bytes_invalid=0 send_seq=203801 receive_seq=203801 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992749 heater_bed: target=0 temp=69.2 pwm=0.000  sysload=0.42 cputime=298.888 memavail=7288768 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.3 pwm=0.000
Stats 800049.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632798 bytes_read=2226482 bytes_retransmit=9 bytes_invalid=0 send_seq=203802 receive_seq=203802 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=0 temp=69.1 pwm=0.000  sysload=0.42 cputime=298.912 memavail=7288636 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.7 pwm=0.000
Stats 800050.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632804 bytes_read=2226585 bytes_retransmit=9 bytes_invalid=0 send_seq=203803 receive_seq=203803 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=0 temp=69.1 pwm=0.000  sysload=0.42 cputime=298.930 memavail=7287880 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.2 pwm=0.000
Stats 800051.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632810 bytes_read=2226703 bytes_retransmit=9 bytes_invalid=0 send_seq=203804 receive_seq=203804 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992755 heater_bed: target=0 temp=69.0 pwm=0.000  sysload=0.39 cputime=298.958 memavail=7287880 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.9 pwm=0.000
Stats 800052.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632816 bytes_read=2226820 bytes_retransmit=9 bytes_invalid=0 send_seq=203805 receive_seq=203805 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=0 temp=69.0 pwm=0.000  sysload=0.39 cputime=298.979 memavail=7287888 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.3 pwm=0.000
Stats 800053.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632822 bytes_read=2226923 bytes_retransmit=9 bytes_invalid=0 send_seq=203806 receive_seq=203806 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=0 temp=68.9 pwm=0.000  sysload=0.39 cputime=298.997 memavail=7287888 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.9 pwm=0.000
Stats 800054.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632828 bytes_read=2227055 bytes_retransmit=9 bytes_invalid=0 send_seq=203807 receive_seq=203807 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=0 temp=68.8 pwm=0.000  sysload=0.39 cputime=299.024 memavail=7287888 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.5 pwm=0.000
Stats 800055.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632834 bytes_read=2227172 bytes_retransmit=9 bytes_invalid=0 send_seq=203808 receive_seq=203808 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992728 heater_bed: target=0 temp=68.8 pwm=0.000  sysload=0.39 cputime=299.050 memavail=7287888 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.9 pwm=0.000
Stats 800056.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632840 bytes_read=2227275 bytes_retransmit=9 bytes_invalid=0 send_seq=203809 receive_seq=203809 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992720 heater_bed: target=0 temp=68.7 pwm=0.000  sysload=0.44 cputime=299.072 memavail=7287888 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.5 pwm=0.000
Stats 800057.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632846 bytes_read=2227393 bytes_retransmit=9 bytes_invalid=0 send_seq=203810 receive_seq=203810 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992714 heater_bed: target=0 temp=68.7 pwm=0.000  sysload=0.44 cputime=299.091 memavail=7288144 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.1 pwm=0.000
Stats 800058.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632852 bytes_read=2227510 bytes_retransmit=9 bytes_invalid=0 send_seq=203811 receive_seq=203811 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992708 heater_bed: target=0 temp=68.6 pwm=0.000  sysload=0.44 cputime=299.112 memavail=7287568 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.5 pwm=0.000
Stats 800059.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632858 bytes_read=2227627 bytes_retransmit=9 bytes_invalid=0 send_seq=203812 receive_seq=203812 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992704 heater_bed: target=0 temp=68.6 pwm=0.000  sysload=0.44 cputime=299.131 memavail=7287676 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.1 pwm=0.000
Stats 800060.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632864 bytes_read=2227745 bytes_retransmit=9 bytes_invalid=0 send_seq=203813 receive_seq=203813 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=0 temp=68.5 pwm=0.000  sysload=0.44 cputime=299.160 memavail=7287452 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.7 pwm=0.000
Stats 800061.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632870 bytes_read=2227862 bytes_retransmit=9 bytes_invalid=0 send_seq=203814 receive_seq=203814 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992730 heater_bed: target=0 temp=68.4 pwm=0.000  sysload=0.48 cputime=299.181 memavail=7287452 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.2 pwm=0.000
Stats 800062.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632876 bytes_read=2227965 bytes_retransmit=9 bytes_invalid=0 send_seq=203815 receive_seq=203815 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992722 heater_bed: target=0 temp=68.4 pwm=0.000  sysload=0.48 cputime=299.197 memavail=7287452 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.8 pwm=0.000
Stats 800063.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632882 bytes_read=2228083 bytes_retransmit=9 bytes_invalid=0 send_seq=203816 receive_seq=203816 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992715 heater_bed: target=0 temp=68.3 pwm=0.000  sysload=0.48 cputime=299.215 memavail=7287228 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.4 pwm=0.000
Stats 800064.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632888 bytes_read=2228200 bytes_retransmit=9 bytes_invalid=0 send_seq=203817 receive_seq=203817 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992712 heater_bed: target=0 temp=68.3 pwm=0.000  sysload=0.48 cputime=299.241 memavail=7287228 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.9 pwm=0.000
Stats 800065.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632894 bytes_read=2228317 bytes_retransmit=9 bytes_invalid=0 send_seq=203818 receive_seq=203818 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992708 heater_bed: target=0 temp=68.2 pwm=0.000  sysload=0.48 cputime=299.260 memavail=7287228 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.5 pwm=0.000
Stats 800066.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632900 bytes_read=2228435 bytes_retransmit=9 bytes_invalid=0 send_seq=203819 receive_seq=203819 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992703 heater_bed: target=0 temp=68.2 pwm=0.000  sysload=0.44 cputime=299.280 memavail=7287228 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.1 pwm=0.000
Stats 800067.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632906 bytes_read=2228552 bytes_retransmit=9 bytes_invalid=0 send_seq=203820 receive_seq=203820 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992701 heater_bed: target=0 temp=68.1 pwm=0.000  sysload=0.44 cputime=299.300 memavail=7287228 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.6 pwm=0.000
Stats 800068.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632912 bytes_read=2228655 bytes_retransmit=9 bytes_invalid=0 send_seq=203821 receive_seq=203821 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992701 heater_bed: target=0 temp=68.1 pwm=0.000  sysload=0.44 cputime=299.323 memavail=7286752 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.2 pwm=0.000
Stats 800069.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632918 bytes_read=2228773 bytes_retransmit=9 bytes_invalid=0 send_seq=203822 receive_seq=203822 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992701 heater_bed: target=0 temp=68.0 pwm=0.000  sysload=0.44 cputime=299.340 memavail=7286756 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.8 pwm=0.000
Stats 800070.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632924 bytes_read=2228904 bytes_retransmit=9 bytes_invalid=0 send_seq=203823 receive_seq=203823 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992694 heater_bed: target=0 temp=68.0 pwm=0.000  sysload=0.44 cputime=299.353 memavail=7286756 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.3 pwm=0.000
Stats 800071.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632930 bytes_read=2229007 bytes_retransmit=9 bytes_invalid=0 send_seq=203824 receive_seq=203824 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992687 heater_bed: target=0 temp=67.9 pwm=0.000  sysload=0.41 cputime=299.375 memavail=7286756 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.9 pwm=0.000
Stats 800072.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632936 bytes_read=2229125 bytes_retransmit=9 bytes_invalid=0 send_seq=203825 receive_seq=203825 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992680 heater_bed: target=0 temp=67.8 pwm=0.000  sysload=0.41 cputime=299.394 memavail=7286756 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.5 pwm=0.000
Stats 800073.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632942 bytes_read=2229238 bytes_retransmit=9 bytes_invalid=0 send_seq=203826 receive_seq=203826 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992674 heater_bed: target=0 temp=67.8 pwm=0.000  sysload=0.41 cputime=299.410 memavail=7286044 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.0 pwm=0.000
Stats 800074.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632948 bytes_read=2229334 bytes_retransmit=9 bytes_invalid=0 send_seq=203827 receive_seq=203827 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992677 heater_bed: target=0 temp=67.7 pwm=0.000  sysload=0.41 cputime=299.433 memavail=7286044 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.6 pwm=0.000
Stats 800075.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632954 bytes_read=2229461 bytes_retransmit=9 bytes_invalid=0 send_seq=203828 receive_seq=203828 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992675 heater_bed: target=0 temp=67.7 pwm=0.000  sysload=0.41 cputime=299.454 memavail=7286044 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.3 pwm=0.000
Stats 800076.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632960 bytes_read=2229578 bytes_retransmit=9 bytes_invalid=0 send_seq=203829 receive_seq=203829 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992671 heater_bed: target=0 temp=67.6 pwm=0.000  sysload=0.38 cputime=299.474 memavail=7286784 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.8 pwm=0.000
Stats 800077.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632966 bytes_read=2229681 bytes_retransmit=9 bytes_invalid=0 send_seq=203830 receive_seq=203830 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992672 heater_bed: target=0 temp=67.6 pwm=0.000  sysload=0.38 cputime=299.494 memavail=7286804 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.4 pwm=0.000
Stats 800078.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632972 bytes_read=2229799 bytes_retransmit=9 bytes_invalid=0 send_seq=203831 receive_seq=203831 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992715 heater_bed: target=0 temp=67.5 pwm=0.000  sysload=0.38 cputime=299.513 memavail=7289208 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.0 pwm=0.000
Stats 800079.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632978 bytes_read=2229916 bytes_retransmit=9 bytes_invalid=0 send_seq=203832 receive_seq=203832 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992715 heater_bed: target=0 temp=67.5 pwm=0.000  sysload=0.38 cputime=299.533 memavail=7289208 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.5 pwm=0.000
Stats 800080.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632984 bytes_read=2230033 bytes_retransmit=9 bytes_invalid=0 send_seq=203833 receive_seq=203833 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992718 heater_bed: target=0 temp=67.4 pwm=0.000  sysload=0.38 cputime=299.551 memavail=7288452 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.2 pwm=0.000
Stats 800081.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632990 bytes_read=2230151 bytes_retransmit=9 bytes_invalid=0 send_seq=203834 receive_seq=203834 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992719 heater_bed: target=0 temp=67.3 pwm=0.000  sysload=0.35 cputime=299.571 memavail=7288452 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.8 pwm=0.000
Stats 800082.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10632996 bytes_read=2230268 bytes_retransmit=9 bytes_invalid=0 send_seq=203835 receive_seq=203835 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992716 heater_bed: target=0 temp=67.3 pwm=0.000  sysload=0.35 cputime=299.593 memavail=7288452 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.3 pwm=0.000
Stats 800083.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633002 bytes_read=2230371 bytes_retransmit=9 bytes_invalid=0 send_seq=203836 receive_seq=203836 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992712 heater_bed: target=0 temp=67.2 pwm=0.000  sysload=0.35 cputime=299.611 memavail=7288232 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.9 pwm=0.000
Stats 800084.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633008 bytes_read=2230489 bytes_retransmit=9 bytes_invalid=0 send_seq=203837 receive_seq=203837 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992709 heater_bed: target=0 temp=67.2 pwm=0.000  sysload=0.35 cputime=299.627 memavail=7288232 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.6 pwm=0.000
Stats 800085.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633014 bytes_read=2230620 bytes_retransmit=9 bytes_invalid=0 send_seq=203838 receive_seq=203838 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992705 heater_bed: target=0 temp=67.1 pwm=0.000  sysload=0.35 cputime=299.651 memavail=7288008 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.1 pwm=0.000
Stats 800086.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633020 bytes_read=2230723 bytes_retransmit=9 bytes_invalid=0 send_seq=203839 receive_seq=203839 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992701 heater_bed: target=0 temp=67.1 pwm=0.000  sysload=0.32 cputime=299.673 memavail=7288156 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.8 pwm=0.000
Stats 800087.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633026 bytes_read=2230841 bytes_retransmit=9 bytes_invalid=0 send_seq=203840 receive_seq=203840 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=0 temp=67.0 pwm=0.000  sysload=0.32 cputime=299.695 memavail=7288260 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.3 pwm=0.000
Stats 800088.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633032 bytes_read=2230958 bytes_retransmit=9 bytes_invalid=0 send_seq=203841 receive_seq=203841 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=0 temp=67.0 pwm=0.000  sysload=0.32 cputime=299.711 memavail=7287812 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.9 pwm=0.000
Stats 800089.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633038 bytes_read=2231061 bytes_retransmit=9 bytes_invalid=0 send_seq=203842 receive_seq=203842 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992728 heater_bed: target=0 temp=66.9 pwm=0.000  sysload=0.32 cputime=299.728 memavail=7287812 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.6 pwm=0.000
Stats 800090.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633044 bytes_read=2231207 bytes_retransmit=9 bytes_invalid=0 send_seq=203843 receive_seq=203843 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992725 heater_bed: target=0 temp=66.8 pwm=0.000  sysload=0.32 cputime=299.749 memavail=7288256 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.1 pwm=0.000
Stats 800091.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633050 bytes_read=2231310 bytes_retransmit=9 bytes_invalid=0 send_seq=203844 receive_seq=203844 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992723 heater_bed: target=0 temp=66.8 pwm=0.000  sysload=0.29 cputime=299.771 memavail=7288568 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.8 pwm=0.000
Stats 800092.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633056 bytes_read=2231413 bytes_retransmit=9 bytes_invalid=0 send_seq=203845 receive_seq=203845 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992718 heater_bed: target=0 temp=66.8 pwm=0.000  sysload=0.29 cputime=299.797 memavail=7288820 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.4 pwm=0.000
Stats 800093.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633062 bytes_read=2231545 bytes_retransmit=9 bytes_invalid=0 send_seq=203846 receive_seq=203846 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992713 heater_bed: target=0 temp=66.7 pwm=0.000  sysload=0.29 cputime=299.823 memavail=7287856 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.0 pwm=0.000
Stats 800094.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633068 bytes_read=2231648 bytes_retransmit=9 bytes_invalid=0 send_seq=203847 receive_seq=203847 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992710 heater_bed: target=0 temp=66.6 pwm=0.000  sysload=0.29 cputime=299.847 memavail=7287856 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.6 pwm=0.000
Stats 800095.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633074 bytes_read=2231765 bytes_retransmit=9 bytes_invalid=0 send_seq=203848 receive_seq=203848 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992708 heater_bed: target=0 temp=66.6 pwm=0.000  sysload=0.29 cputime=299.878 memavail=7287856 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.3 pwm=0.000
Stats 800096.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633080 bytes_read=2231897 bytes_retransmit=9 bytes_invalid=0 send_seq=203849 receive_seq=203849 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992758 heater_bed: target=0 temp=66.5 pwm=0.000  sysload=0.27 cputime=299.908 memavail=7287856 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.8 pwm=0.000
Stats 800097.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633086 bytes_read=2232000 bytes_retransmit=9 bytes_invalid=0 send_seq=203850 receive_seq=203850 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=0 temp=66.5 pwm=0.000  sysload=0.27 cputime=299.931 memavail=7287856 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.4 pwm=0.000
Stats 800098.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633092 bytes_read=2232103 bytes_retransmit=9 bytes_invalid=0 send_seq=203851 receive_seq=203851 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=0 temp=66.4 pwm=0.000  sysload=0.27 cputime=299.959 memavail=7287856 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.1 pwm=0.000
Stats 800099.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633104 bytes_read=2232251 bytes_retransmit=9 bytes_invalid=0 send_seq=203853 receive_seq=203853 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992742 heater_bed: target=0 temp=66.4 pwm=0.000  sysload=0.27 cputime=299.991 memavail=7287352 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.7 pwm=0.000
Stats 800100.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633110 bytes_read=2232368 bytes_retransmit=9 bytes_invalid=0 send_seq=203854 receive_seq=203854 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992806 heater_bed: target=0 temp=66.3 pwm=0.000  sysload=0.27 cputime=300.023 memavail=7289328 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.3 pwm=0.000
Stats 800101.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633116 bytes_read=2232471 bytes_retransmit=9 bytes_invalid=0 send_seq=203855 receive_seq=203855 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=0 temp=66.2 pwm=0.000  sysload=0.25 cputime=300.051 memavail=7289328 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.0 pwm=0.000
Stats 800102.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633122 bytes_read=2232603 bytes_retransmit=9 bytes_invalid=0 send_seq=203856 receive_seq=203856 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992780 heater_bed: target=0 temp=66.2 pwm=0.000  sysload=0.25 cputime=300.072 memavail=7289328 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.5 pwm=0.000
Stats 800103.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633128 bytes_read=2232706 bytes_retransmit=9 bytes_invalid=0 send_seq=203857 receive_seq=203857 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=0 temp=66.1 pwm=0.000  sysload=0.25 cputime=300.091 memavail=7288096 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.2 pwm=0.000
Stats 800104.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633134 bytes_read=2232809 bytes_retransmit=9 bytes_invalid=0 send_seq=203858 receive_seq=203858 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=0 temp=66.1 pwm=0.000  sysload=0.25 cputime=300.115 memavail=7287872 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.9 pwm=0.000
Stats 800105.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633140 bytes_read=2232955 bytes_retransmit=9 bytes_invalid=0 send_seq=203859 receive_seq=203859 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992763 heater_bed: target=0 temp=66.0 pwm=0.000  sysload=0.25 cputime=300.138 memavail=7287872 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.4 pwm=0.000
Stats 800106.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633146 bytes_read=2233058 bytes_retransmit=9 bytes_invalid=0 send_seq=203860 receive_seq=203860 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=0 temp=66.0 pwm=0.000  sysload=0.23 cputime=300.157 memavail=7291632 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.1 pwm=0.000
Stats 800107.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633152 bytes_read=2233161 bytes_retransmit=9 bytes_invalid=0 send_seq=203861 receive_seq=203861 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992751 heater_bed: target=0 temp=65.9 pwm=0.000  sysload=0.23 cputime=300.181 memavail=7291508 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.8 pwm=0.000
Stats 800108.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633158 bytes_read=2233293 bytes_retransmit=9 bytes_invalid=0 send_seq=203862 receive_seq=203862 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992756 heater_bed: target=0 temp=65.9 pwm=0.000  sysload=0.23 cputime=300.205 memavail=7290516 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.3 pwm=0.000
Stats 800109.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633164 bytes_read=2233389 bytes_retransmit=9 bytes_invalid=0 send_seq=203863 receive_seq=203863 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=0 temp=65.8 pwm=0.000  sysload=0.23 cputime=300.226 memavail=7290520 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.0 pwm=0.000
Stats 800110.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633170 bytes_read=2233499 bytes_retransmit=9 bytes_invalid=0 send_seq=203864 receive_seq=203864 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=0 temp=65.8 pwm=0.000  sysload=0.23 cputime=300.253 memavail=7289512 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.7 pwm=0.000
Stats 800111.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633176 bytes_read=2233628 bytes_retransmit=9 bytes_invalid=0 send_seq=203865 receive_seq=203865 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=0 temp=65.7 pwm=0.000  sysload=0.21 cputime=300.278 memavail=7289512 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.3 pwm=0.000
Stats 800112.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633182 bytes_read=2233731 bytes_retransmit=9 bytes_invalid=0 send_seq=203866 receive_seq=203866 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=0 temp=65.7 pwm=0.000  sysload=0.21 cputime=300.294 memavail=7289512 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.0 pwm=0.000
Stats 800113.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633188 bytes_read=2233834 bytes_retransmit=9 bytes_invalid=0 send_seq=203867 receive_seq=203867 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=0 temp=65.6 pwm=0.000  sysload=0.21 cputime=300.312 memavail=7289512 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.6 pwm=0.000
Stats 800114.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633194 bytes_read=2233966 bytes_retransmit=9 bytes_invalid=0 send_seq=203868 receive_seq=203868 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=0 temp=65.6 pwm=0.000  sysload=0.21 cputime=300.335 memavail=7289512 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.2 pwm=0.000
Stats 800115.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633200 bytes_read=2234083 bytes_retransmit=9 bytes_invalid=0 send_seq=203869 receive_seq=203869 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992795 heater_bed: target=0 temp=65.5 pwm=0.000  sysload=0.21 cputime=300.353 memavail=7289512 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.9 pwm=0.000
Stats 800116.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633206 bytes_read=2234186 bytes_retransmit=9 bytes_invalid=0 send_seq=203870 receive_seq=203870 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=0 temp=65.5 pwm=0.000  sysload=0.19 cputime=300.377 memavail=7289512 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.6 pwm=0.000
Stats 800117.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633212 bytes_read=2234318 bytes_retransmit=9 bytes_invalid=0 send_seq=203871 receive_seq=203871 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992806 heater_bed: target=0 temp=65.4 pwm=0.000  sysload=0.19 cputime=300.404 memavail=7289512 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.2 pwm=0.000
Stats 800118.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633218 bytes_read=2234421 bytes_retransmit=9 bytes_invalid=0 send_seq=203872 receive_seq=203872 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=0 temp=65.4 pwm=0.000  sysload=0.19 cputime=300.423 memavail=7288840 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.9 pwm=0.000
Stats 800119.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633224 bytes_read=2234539 bytes_retransmit=9 bytes_invalid=0 send_seq=203873 receive_seq=203873 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=0 temp=65.3 pwm=0.000  sysload=0.19 cputime=300.444 memavail=7288840 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.5 pwm=0.000
Stats 800120.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633230 bytes_read=2234670 bytes_retransmit=9 bytes_invalid=0 send_seq=203874 receive_seq=203874 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=0 temp=65.3 pwm=0.000  sysload=0.19 cputime=300.465 memavail=7288084 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.1 pwm=0.000
Stats 800121.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633236 bytes_read=2234774 bytes_retransmit=9 bytes_invalid=0 send_seq=203875 receive_seq=203875 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=0 temp=65.2 pwm=0.000  sysload=0.18 cputime=300.485 memavail=7288084 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.8 pwm=0.000
Stats 800122.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633242 bytes_read=2234895 bytes_retransmit=9 bytes_invalid=0 send_seq=203876 receive_seq=203876 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=0 temp=65.2 pwm=0.000  sysload=0.18 cputime=300.502 memavail=7288084 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.5 pwm=0.000
Stats 800123.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633248 bytes_read=2235016 bytes_retransmit=9 bytes_invalid=0 send_seq=203877 receive_seq=203877 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=0 temp=65.1 pwm=0.000  sysload=0.18 cputime=300.519 memavail=7288084 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.1 pwm=0.000
Stats 800124.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633254 bytes_read=2235122 bytes_retransmit=9 bytes_invalid=0 send_seq=203878 receive_seq=203878 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992750 heater_bed: target=0 temp=65.1 pwm=0.000  sysload=0.18 cputime=300.543 memavail=7288084 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.8 pwm=0.000
Stats 800125.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633260 bytes_read=2235257 bytes_retransmit=9 bytes_invalid=0 send_seq=203879 receive_seq=203879 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=0 temp=65.0 pwm=0.000  sysload=0.18 cputime=300.568 memavail=7288084 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.5 pwm=0.000
Stats 800126.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633266 bytes_read=2235378 bytes_retransmit=9 bytes_invalid=0 send_seq=203880 receive_seq=203880 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=0 temp=64.9 pwm=0.000  sysload=0.16 cputime=300.587 memavail=7288232 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.1 pwm=0.000
Stats 800127.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633272 bytes_read=2235484 bytes_retransmit=9 bytes_invalid=0 send_seq=203881 receive_seq=203881 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992737 heater_bed: target=0 temp=64.9 pwm=0.000  sysload=0.16 cputime=300.620 memavail=7288336 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.8 pwm=0.000
Stats 800128.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633278 bytes_read=2235605 bytes_retransmit=9 bytes_invalid=0 send_seq=203882 receive_seq=203882 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=0 temp=64.9 pwm=0.000  sysload=0.16 cputime=300.650 memavail=7287832 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.5 pwm=0.000
Stats 800129.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633284 bytes_read=2235726 bytes_retransmit=9 bytes_invalid=0 send_seq=203883 receive_seq=203883 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992730 heater_bed: target=0 temp=64.8 pwm=0.000  sysload=0.16 cputime=300.672 memavail=7287832 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.1 pwm=0.000
Stats 800130.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633290 bytes_read=2235832 bytes_retransmit=9 bytes_invalid=0 send_seq=203884 receive_seq=203884 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 heater_bed: target=0 temp=64.8 pwm=0.000  sysload=0.16 cputime=300.692 memavail=7287328 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.8 pwm=0.000
Stats 800131.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633296 bytes_read=2235967 bytes_retransmit=9 bytes_invalid=0 send_seq=203885 receive_seq=203885 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992721 heater_bed: target=0 temp=64.7 pwm=0.000  sysload=0.15 cputime=300.711 memavail=7287336 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.6 pwm=0.000
Stats 800132.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633302 bytes_read=2236088 bytes_retransmit=9 bytes_invalid=0 send_seq=203886 receive_seq=203886 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992717 heater_bed: target=0 temp=64.7 pwm=0.000  sysload=0.15 cputime=300.733 memavail=7287336 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.2 pwm=0.000
Stats 800133.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633308 bytes_read=2236194 bytes_retransmit=9 bytes_invalid=0 send_seq=203887 receive_seq=203887 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992715 heater_bed: target=0 temp=64.6 pwm=0.000  sysload=0.15 cputime=300.755 memavail=7287084 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.9 pwm=0.000
Stats 800134.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633314 bytes_read=2236315 bytes_retransmit=9 bytes_invalid=0 send_seq=203888 receive_seq=203888 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992713 heater_bed: target=0 temp=64.6 pwm=0.000  sysload=0.15 cputime=300.777 memavail=7287084 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.6 pwm=0.000
Stats 800135.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633320 bytes_read=2236436 bytes_retransmit=9 bytes_invalid=0 send_seq=203889 receive_seq=203889 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992757 heater_bed: target=0 temp=64.5 pwm=0.000  sysload=0.15 cputime=300.799 memavail=7287084 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.2 pwm=0.000
Stats 800136.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633326 bytes_read=2236556 bytes_retransmit=9 bytes_invalid=0 send_seq=203890 receive_seq=203890 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992752 heater_bed: target=0 temp=64.5 pwm=0.000  sysload=0.14 cputime=300.821 memavail=7287084 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.9 pwm=0.000
Stats 800137.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633332 bytes_read=2236677 bytes_retransmit=9 bytes_invalid=0 send_seq=203891 receive_seq=203891 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992746 heater_bed: target=0 temp=64.4 pwm=0.000  sysload=0.14 cputime=300.849 memavail=7287084 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.6 pwm=0.000
Stats 800138.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633338 bytes_read=2236798 bytes_retransmit=9 bytes_invalid=0 send_seq=203892 receive_seq=203892 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=0 temp=64.3 pwm=0.000  sysload=0.14 cputime=300.874 memavail=7286608 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.2 pwm=0.000
Stats 800139.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633344 bytes_read=2236904 bytes_retransmit=9 bytes_invalid=0 send_seq=203893 receive_seq=203893 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 heater_bed: target=0 temp=64.3 pwm=0.000  sysload=0.14 cputime=300.894 memavail=7286612 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.9 pwm=0.000
Stats 800140.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633350 bytes_read=2237025 bytes_retransmit=9 bytes_invalid=0 send_seq=203894 receive_seq=203894 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=0 temp=64.2 pwm=0.000  sysload=0.14 cputime=300.915 memavail=7286256 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.7 pwm=0.000
Stats 800141.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633356 bytes_read=2237160 bytes_retransmit=9 bytes_invalid=0 send_seq=203895 receive_seq=203895 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992729 heater_bed: target=0 temp=64.2 pwm=0.000  sysload=0.12 cputime=300.935 memavail=7286864 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.3 pwm=0.000
Stats 800142.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633362 bytes_read=2237266 bytes_retransmit=9 bytes_invalid=0 send_seq=203896 receive_seq=203896 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992724 heater_bed: target=0 temp=64.2 pwm=0.000  sysload=0.12 cputime=300.959 memavail=7286864 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.0 pwm=0.000
Stats 800143.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633368 bytes_read=2237387 bytes_retransmit=9 bytes_invalid=0 send_seq=203897 receive_seq=203897 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992722 heater_bed: target=0 temp=64.1 pwm=0.000  sysload=0.12 cputime=300.981 memavail=7286416 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.7 pwm=0.000
Stats 800144.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633374 bytes_read=2237506 bytes_retransmit=9 bytes_invalid=0 send_seq=203898 receive_seq=203898 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992722 heater_bed: target=0 temp=64.1 pwm=0.000  sysload=0.12 cputime=301.007 memavail=7286416 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.4 pwm=0.000
Stats 800145.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633380 bytes_read=2237605 bytes_retransmit=9 bytes_invalid=0 send_seq=203899 receive_seq=203899 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992716 heater_bed: target=0 temp=64.0 pwm=0.000  sysload=0.12 cputime=301.028 memavail=7286416 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.1 pwm=0.000
Stats 800146.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633386 bytes_read=2237732 bytes_retransmit=9 bytes_invalid=0 send_seq=203900 receive_seq=203900 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992710 heater_bed: target=0 temp=64.0 pwm=0.000  sysload=0.11 cputime=301.047 memavail=7286564 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.8 pwm=0.000
Stats 800147.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633392 bytes_read=2237851 bytes_retransmit=9 bytes_invalid=0 send_seq=203901 receive_seq=203901 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992706 heater_bed: target=0 temp=63.9 pwm=0.000  sysload=0.11 cputime=301.064 memavail=7286668 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.4 pwm=0.000
Stats 800148.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633398 bytes_read=2237957 bytes_retransmit=9 bytes_invalid=0 send_seq=203902 receive_seq=203902 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992701 heater_bed: target=0 temp=63.9 pwm=0.000  sysload=0.11 cputime=301.077 memavail=7286668 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.2 pwm=0.000
Stats 800149.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633404 bytes_read=2238078 bytes_retransmit=9 bytes_invalid=0 send_seq=203903 receive_seq=203903 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992700 heater_bed: target=0 temp=63.8 pwm=0.000  sysload=0.11 cputime=301.097 memavail=7286668 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.9 pwm=0.000
Stats 800150.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633410 bytes_read=2238199 bytes_retransmit=9 bytes_invalid=0 send_seq=203904 receive_seq=203904 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992699 heater_bed: target=0 temp=63.8 pwm=0.000  sysload=0.11 cputime=301.117 memavail=7286564 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.5 pwm=0.000
Stats 800151.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633416 bytes_read=2238319 bytes_retransmit=9 bytes_invalid=0 send_seq=203905 receive_seq=203905 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992698 heater_bed: target=0 temp=63.8 pwm=0.000  sysload=0.27 cputime=301.142 memavail=7286672 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.3 pwm=0.000
Stats 800152.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633422 bytes_read=2238440 bytes_retransmit=9 bytes_invalid=0 send_seq=203906 receive_seq=203906 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992701 heater_bed: target=0 temp=63.7 pwm=0.000  sysload=0.27 cputime=301.166 memavail=7286672 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.0 pwm=0.000
Stats 800153.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633428 bytes_read=2238561 bytes_retransmit=9 bytes_invalid=0 send_seq=203907 receive_seq=203907 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992740 heater_bed: target=0 temp=63.6 pwm=0.000  sysload=0.27 cputime=301.191 memavail=7286672 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.7 pwm=0.000
Stats 800154.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633434 bytes_read=2238667 bytes_retransmit=9 bytes_invalid=0 send_seq=203908 receive_seq=203908 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992739 heater_bed: target=0 temp=63.6 pwm=0.000  sysload=0.27 cputime=301.208 memavail=7286672 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.4 pwm=0.000
Stats 800155.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633440 bytes_read=2238788 bytes_retransmit=9 bytes_invalid=0 send_seq=203909 receive_seq=203909 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992735 heater_bed: target=0 temp=63.5 pwm=0.000  sysload=0.27 cputime=301.228 memavail=7286672 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.1 pwm=0.000
Stats 800156.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633446 bytes_read=2238923 bytes_retransmit=9 bytes_invalid=0 send_seq=203910 receive_seq=203910 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992733 heater_bed: target=0 temp=63.5 pwm=0.000  sysload=0.32 cputime=301.257 memavail=7286672 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.8 pwm=0.000
Stats 800157.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633452 bytes_read=2239029 bytes_retransmit=9 bytes_invalid=0 send_seq=203911 receive_seq=203911 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992734 heater_bed: target=0 temp=63.4 pwm=0.000  sysload=0.32 cputime=301.281 memavail=7286672 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.5 pwm=0.000
Stats 800158.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633458 bytes_read=2239150 bytes_retransmit=9 bytes_invalid=0 send_seq=203912 receive_seq=203912 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992732 heater_bed: target=0 temp=63.4 pwm=0.000  sysload=0.32 cputime=301.306 memavail=7286672 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.3 pwm=0.000
Stats 800159.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633464 bytes_read=2239271 bytes_retransmit=9 bytes_invalid=0 send_seq=203913 receive_seq=203913 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992731 heater_bed: target=0 temp=63.4 pwm=0.000  sysload=0.32 cputime=301.331 memavail=7286680 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.9 pwm=0.000
Stats 800160.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633470 bytes_read=2239377 bytes_retransmit=9 bytes_invalid=0 send_seq=203914 receive_seq=203914 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992732 heater_bed: target=0 temp=63.3 pwm=0.000  sysload=0.32 cputime=301.350 memavail=7286428 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.7 pwm=0.000
Stats 800161.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633482 bytes_read=2239528 bytes_retransmit=9 bytes_invalid=0 send_seq=203916 receive_seq=203916 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=0 temp=63.3 pwm=0.000  sysload=0.30 cputime=301.371 memavail=7286428 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.4 pwm=0.000
Stats 800162.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633488 bytes_read=2239649 bytes_retransmit=9 bytes_invalid=0 send_seq=203917 receive_seq=203917 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=0 temp=63.2 pwm=0.000  sysload=0.30 cputime=301.391 memavail=7286428 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.1 pwm=0.000
Stats 800163.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633494 bytes_read=2239755 bytes_retransmit=9 bytes_invalid=0 send_seq=203918 receive_seq=203918 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992754 heater_bed: target=0 temp=63.2 pwm=0.000  sysload=0.30 cputime=301.413 memavail=7285672 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.9 pwm=0.000
Stats 800164.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633500 bytes_read=2239876 bytes_retransmit=9 bytes_invalid=0 send_seq=203919 receive_seq=203919 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992748 heater_bed: target=0 temp=63.1 pwm=0.000  sysload=0.30 cputime=301.426 memavail=7285672 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.6 pwm=0.000
Stats 800165.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633506 bytes_read=2239997 bytes_retransmit=9 bytes_invalid=0 send_seq=203920 receive_seq=203920 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992747 heater_bed: target=0 temp=63.1 pwm=0.000  sysload=0.30 cputime=301.453 memavail=7285672 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.2 pwm=0.000
Stats 800166.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633512 bytes_read=2240117 bytes_retransmit=9 bytes_invalid=0 send_seq=203921 receive_seq=203921 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=0 temp=63.0 pwm=0.000  sysload=0.27 cputime=301.485 memavail=7287300 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.0 pwm=0.000
Stats 800167.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633518 bytes_read=2240238 bytes_retransmit=9 bytes_invalid=0 send_seq=203922 receive_seq=203922 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=0 temp=63.0 pwm=0.000  sysload=0.27 cputime=301.505 memavail=7287436 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.7 pwm=0.000
Stats 800168.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633524 bytes_read=2240359 bytes_retransmit=9 bytes_invalid=0 send_seq=203923 receive_seq=203923 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992781 heater_bed: target=0 temp=62.9 pwm=0.000  sysload=0.27 cputime=301.528 memavail=7286932 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.4 pwm=0.000
Stats 800169.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633530 bytes_read=2240465 bytes_retransmit=9 bytes_invalid=0 send_seq=203924 receive_seq=203924 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=0 temp=62.9 pwm=0.000  sysload=0.27 cputime=301.546 memavail=7286932 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.1 pwm=0.000
Stats 800170.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633536 bytes_read=2240586 bytes_retransmit=9 bytes_invalid=0 send_seq=203925 receive_seq=203925 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=0 temp=62.9 pwm=0.000  sysload=0.27 cputime=301.565 memavail=7286072 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.9 pwm=0.000
Stats 800171.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633542 bytes_read=2240721 bytes_retransmit=9 bytes_invalid=0 send_seq=203926 receive_seq=203926 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=0 temp=62.8 pwm=0.000  sysload=0.25 cputime=301.583 memavail=7286180 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.6 pwm=0.000
Stats 800172.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633548 bytes_read=2240827 bytes_retransmit=9 bytes_invalid=0 send_seq=203927 receive_seq=203927 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=0 temp=62.7 pwm=0.000  sysload=0.25 cputime=301.599 memavail=7286180 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.4 pwm=0.000
Stats 800173.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633554 bytes_read=2240948 bytes_retransmit=9 bytes_invalid=0 send_seq=203928 receive_seq=203928 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=0 temp=62.7 pwm=0.000  sysload=0.25 cputime=301.622 memavail=7286180 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.1 pwm=0.000
Stats 800174.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633560 bytes_read=2241069 bytes_retransmit=9 bytes_invalid=0 send_seq=203929 receive_seq=203929 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992826 heater_bed: target=0 temp=62.6 pwm=0.000  sysload=0.25 cputime=301.643 memavail=7286180 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.8 pwm=0.000
Stats 800175.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633566 bytes_read=2241175 bytes_retransmit=9 bytes_invalid=0 send_seq=203930 receive_seq=203930 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=0 temp=62.6 pwm=0.000  sysload=0.25 cputime=301.661 memavail=7286180 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.6 pwm=0.000
Stats 800176.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633572 bytes_read=2241310 bytes_retransmit=9 bytes_invalid=0 send_seq=203931 receive_seq=203931 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=0 temp=62.5 pwm=0.000  sysload=0.23 cputime=301.681 memavail=7286180 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.3 pwm=0.000
Stats 800177.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633578 bytes_read=2241431 bytes_retransmit=9 bytes_invalid=0 send_seq=203932 receive_seq=203932 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992801 heater_bed: target=0 temp=62.6 pwm=0.000  sysload=0.23 cputime=301.702 memavail=7286180 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.0 pwm=0.000
Stats 800178.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633584 bytes_read=2241537 bytes_retransmit=9 bytes_invalid=0 send_seq=203933 receive_seq=203933 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=0 temp=62.5 pwm=0.000  sysload=0.23 cputime=301.723 memavail=7285928 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.7 pwm=0.000
Stats 800179.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633590 bytes_read=2241658 bytes_retransmit=9 bytes_invalid=0 send_seq=203934 receive_seq=203934 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992790 heater_bed: target=0 temp=62.4 pwm=0.000  sysload=0.23 cputime=301.742 memavail=7285928 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.5 pwm=0.000
Stats 800180.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633596 bytes_read=2241776 bytes_retransmit=9 bytes_invalid=0 send_seq=203935 receive_seq=203935 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=0 temp=62.4 pwm=0.000  sysload=0.23 cputime=301.758 memavail=7285928 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.2 pwm=0.000
Stats 800181.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633602 bytes_read=2241889 bytes_retransmit=9 bytes_invalid=0 send_seq=203936 receive_seq=203936 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=0 temp=62.3 pwm=0.000  sysload=0.21 cputime=301.779 memavail=7285932 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.9 pwm=0.000
Stats 800182.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633608 bytes_read=2242003 bytes_retransmit=9 bytes_invalid=0 send_seq=203937 receive_seq=203937 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=0 temp=62.3 pwm=0.000  sysload=0.21 cputime=301.801 memavail=7285932 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.7 pwm=0.000
Stats 800183.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633614 bytes_read=2242124 bytes_retransmit=9 bytes_invalid=0 send_seq=203938 receive_seq=203938 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=0 temp=62.3 pwm=0.000  sysload=0.21 cputime=301.822 memavail=7285932 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.4 pwm=0.000
Stats 800184.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633620 bytes_read=2242230 bytes_retransmit=9 bytes_invalid=0 send_seq=203939 receive_seq=203939 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992772 heater_bed: target=0 temp=62.2 pwm=0.000  sysload=0.21 cputime=301.844 memavail=7285932 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.1 pwm=0.000
Stats 800185.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633626 bytes_read=2242351 bytes_retransmit=9 bytes_invalid=0 send_seq=203940 receive_seq=203940 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992769 heater_bed: target=0 temp=62.1 pwm=0.000  sysload=0.21 cputime=301.864 memavail=7285932 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.9 pwm=0.000
Stats 800186.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633632 bytes_read=2242486 bytes_retransmit=9 bytes_invalid=0 send_seq=203941 receive_seq=203941 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=0 temp=62.1 pwm=0.000  sysload=0.20 cputime=301.892 memavail=7285932 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.6 pwm=0.000
Stats 800187.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633638 bytes_read=2242592 bytes_retransmit=9 bytes_invalid=0 send_seq=203942 receive_seq=203942 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992765 heater_bed: target=0 temp=62.1 pwm=0.000  sysload=0.20 cputime=301.915 memavail=7285932 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.4 pwm=0.000
Stats 800188.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633644 bytes_read=2242713 bytes_retransmit=9 bytes_invalid=0 send_seq=203943 receive_seq=203943 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=0 temp=62.1 pwm=0.000  sysload=0.20 cputime=301.939 memavail=7285932 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.2 pwm=0.000
Stats 800189.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633650 bytes_read=2242834 bytes_retransmit=9 bytes_invalid=0 send_seq=203944 receive_seq=203944 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992816 heater_bed: target=0 temp=62.0 pwm=0.000  sysload=0.20 cputime=301.959 memavail=7285708 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.9 pwm=0.000
Stats 800190.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633656 bytes_read=2242940 bytes_retransmit=9 bytes_invalid=0 send_seq=203945 receive_seq=203945 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=0 temp=61.9 pwm=0.000  sysload=0.20 cputime=301.978 memavail=7285708 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.6 pwm=0.000
Stats 800191.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633662 bytes_read=2243075 bytes_retransmit=9 bytes_invalid=0 send_seq=203946 receive_seq=203946 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=0 temp=61.9 pwm=0.000  sysload=0.18 cputime=302.003 memavail=7285712 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.4 pwm=0.000
Stats 800192.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633668 bytes_read=2243196 bytes_retransmit=9 bytes_invalid=0 send_seq=203947 receive_seq=203947 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992831 heater_bed: target=0 temp=61.8 pwm=0.000  sysload=0.18 cputime=302.031 memavail=7285712 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.1 pwm=0.000
Stats 800193.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633674 bytes_read=2243302 bytes_retransmit=9 bytes_invalid=0 send_seq=203948 receive_seq=203948 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=0 temp=61.8 pwm=0.000  sysload=0.18 cputime=302.049 memavail=7285460 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.9 pwm=0.000
Stats 800194.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633680 bytes_read=2243423 bytes_retransmit=9 bytes_invalid=0 send_seq=203949 receive_seq=203949 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=0 temp=61.8 pwm=0.000  sysload=0.18 cputime=302.067 memavail=7285460 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.7 pwm=0.000
Stats 800195.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633686 bytes_read=2243544 bytes_retransmit=9 bytes_invalid=0 send_seq=203950 receive_seq=203950 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=0 temp=61.7 pwm=0.000  sysload=0.18 cputime=302.095 memavail=7285460 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.4 pwm=0.000
Stats 800196.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633692 bytes_read=2243664 bytes_retransmit=9 bytes_invalid=0 send_seq=203951 receive_seq=203951 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992803 heater_bed: target=0 temp=61.6 pwm=0.000  sysload=0.25 cputime=302.117 memavail=7285608 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.2 pwm=0.000
Stats 800197.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633698 bytes_read=2243785 bytes_retransmit=9 bytes_invalid=0 send_seq=203952 receive_seq=203952 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992796 heater_bed: target=0 temp=61.7 pwm=0.000  sysload=0.25 cputime=302.137 memavail=7285968 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.0 pwm=0.000
Stats 800198.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633704 bytes_read=2243906 bytes_retransmit=9 bytes_invalid=0 send_seq=203953 receive_seq=203953 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=0 temp=61.6 pwm=0.000  sysload=0.25 cputime=302.163 memavail=7285716 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.6 pwm=0.000
Stats 800199.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633710 bytes_read=2244012 bytes_retransmit=9 bytes_invalid=0 send_seq=203954 receive_seq=203954 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=0 temp=61.6 pwm=0.000  sysload=0.25 cputime=302.183 memavail=7285716 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.5 pwm=0.000
Stats 800200.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633716 bytes_read=2244133 bytes_retransmit=9 bytes_invalid=0 send_seq=203955 receive_seq=203955 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=0 temp=61.5 pwm=0.000  sysload=0.25 cputime=302.203 memavail=7285716 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.2 pwm=0.000
Stats 800201.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633722 bytes_read=2244268 bytes_retransmit=9 bytes_invalid=0 send_seq=203956 receive_seq=203956 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=0 temp=61.4 pwm=0.000  sysload=0.23 cputime=302.221 memavail=7286460 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.0 pwm=0.000
Stats 800202.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633728 bytes_read=2244374 bytes_retransmit=9 bytes_invalid=0 send_seq=203957 receive_seq=203957 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=0 temp=61.4 pwm=0.000  sysload=0.23 cputime=302.248 memavail=7286228 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.7 pwm=0.000
Stats 800203.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633734 bytes_read=2244495 bytes_retransmit=9 bytes_invalid=0 send_seq=203958 receive_seq=203958 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 heater_bed: target=0 temp=61.4 pwm=0.000  sysload=0.23 cputime=302.272 memavail=7288640 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.5 pwm=0.000
Stats 800204.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633740 bytes_read=2244616 bytes_retransmit=9 bytes_invalid=0 send_seq=203959 receive_seq=203959 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=0 temp=61.3 pwm=0.000  sysload=0.23 cputime=302.295 memavail=7288640 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.2 pwm=0.000
Stats 800205.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633746 bytes_read=2244722 bytes_retransmit=9 bytes_invalid=0 send_seq=203960 receive_seq=203960 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992775 heater_bed: target=0 temp=61.3 pwm=0.000  sysload=0.23 cputime=302.314 memavail=7288416 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.0 pwm=0.000
Stats 800206.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633752 bytes_read=2244857 bytes_retransmit=9 bytes_invalid=0 send_seq=203961 receive_seq=203961 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992771 heater_bed: target=0 temp=61.2 pwm=0.000  sysload=0.21 cputime=302.331 memavail=7288192 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.7 pwm=0.000
Stats 800207.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633758 bytes_read=2244978 bytes_retransmit=9 bytes_invalid=0 send_seq=203962 receive_seq=203962 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=0 temp=61.2 pwm=0.000  sysload=0.21 cputime=302.349 memavail=7288192 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.5 pwm=0.000
Stats 800208.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633764 bytes_read=2245084 bytes_retransmit=9 bytes_invalid=0 send_seq=203963 receive_seq=203963 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992762 heater_bed: target=0 temp=61.1 pwm=0.000  sysload=0.21 cputime=302.372 memavail=7287704 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.3 pwm=0.000
Stats 800209.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633770 bytes_read=2245205 bytes_retransmit=9 bytes_invalid=0 send_seq=203964 receive_seq=203964 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992761 heater_bed: target=0 temp=61.1 pwm=0.000  sysload=0.21 cputime=302.395 memavail=7287704 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.1 pwm=0.000
Stats 800210.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633776 bytes_read=2245326 bytes_retransmit=9 bytes_invalid=0 send_seq=203965 receive_seq=203965 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=0 temp=61.0 pwm=0.000  sysload=0.21 cputime=302.417 memavail=7287436 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.8 pwm=0.000
Stats 800211.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633782 bytes_read=2245446 bytes_retransmit=9 bytes_invalid=0 send_seq=203966 receive_seq=203966 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=0 temp=61.0 pwm=0.000  sysload=0.27 cputime=302.439 memavail=7287452 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.6 pwm=0.000
Stats 800212.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633788 bytes_read=2245567 bytes_retransmit=9 bytes_invalid=0 send_seq=203967 receive_seq=203967 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=0 temp=60.9 pwm=0.000  sysload=0.27 cputime=302.468 memavail=7287452 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.4 pwm=0.000
Stats 800213.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633794 bytes_read=2245688 bytes_retransmit=9 bytes_invalid=0 send_seq=203968 receive_seq=203968 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=0 temp=60.9 pwm=0.000  sysload=0.27 cputime=302.499 memavail=7287452 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.1 pwm=0.000
Stats 800214.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633800 bytes_read=2245794 bytes_retransmit=9 bytes_invalid=0 send_seq=203969 receive_seq=203969 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992783 heater_bed: target=0 temp=60.9 pwm=0.000  sysload=0.27 cputime=302.527 memavail=7287456 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.9 pwm=0.000
Stats 800215.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633806 bytes_read=2245915 bytes_retransmit=9 bytes_invalid=0 send_seq=203970 receive_seq=203970 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992778 heater_bed: target=0 temp=60.9 pwm=0.000  sysload=0.27 cputime=302.550 memavail=7287456 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.7 pwm=0.000
Stats 800216.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633812 bytes_read=2246032 bytes_retransmit=9 bytes_invalid=0 send_seq=203971 receive_seq=203971 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992774 heater_bed: target=0 temp=60.8 pwm=0.000  sysload=0.25 cputime=302.572 memavail=7287456 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.5 pwm=0.000
Stats 800217.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633818 bytes_read=2246145 bytes_retransmit=9 bytes_invalid=0 send_seq=203972 receive_seq=203972 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992770 heater_bed: target=0 temp=60.8 pwm=0.000  sysload=0.25 cputime=302.602 memavail=7290456 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.3 pwm=0.000
Stats 800218.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633824 bytes_read=2246261 bytes_retransmit=9 bytes_invalid=0 send_seq=203973 receive_seq=203973 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992767 heater_bed: target=0 temp=60.7 pwm=0.000  sysload=0.25 cputime=302.626 memavail=7288924 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.1 pwm=0.000
Stats 800219.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633830 bytes_read=2246382 bytes_retransmit=9 bytes_invalid=0 send_seq=203974 receive_seq=203974 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=0 temp=60.7 pwm=0.000  sysload=0.25 cputime=302.650 memavail=7288700 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.8 pwm=0.000
Stats 800220.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633836 bytes_read=2246488 bytes_retransmit=9 bytes_invalid=0 send_seq=203975 receive_seq=203975 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992803 heater_bed: target=0 temp=60.6 pwm=0.000  sysload=0.25 cputime=302.678 memavail=7287504 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.6 pwm=0.000
Stats 800221.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633842 bytes_read=2246609 bytes_retransmit=9 bytes_invalid=0 send_seq=203976 receive_seq=203976 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=0 temp=60.6 pwm=0.000  sysload=0.23 cputime=302.701 memavail=7287644 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.4 pwm=0.000
Stats 800222.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633854 bytes_read=2246760 bytes_retransmit=9 bytes_invalid=0 send_seq=203978 receive_seq=203978 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992782 heater_bed: target=0 temp=60.6 pwm=0.000  sysload=0.23 cputime=302.721 memavail=7287644 print_time=5146.297 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.1 pwm=0.000
Stats 800223.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633860 bytes_read=2246866 bytes_retransmit=9 bytes_invalid=0 send_seq=203979 receive_seq=203979 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=0 temp=60.6 pwm=0.000  sysload=0.23 cputime=302.750 memavail=7285700 print_time=5447.233 buffer_time=0.177 print_stall=0 extruder: target=0 temp=94.9 pwm=0.000
Stats 800224.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633866 bytes_read=2246987 bytes_retransmit=9 bytes_invalid=0 send_seq=203980 receive_seq=203980 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=0 temp=60.4 pwm=0.000  sysload=0.23 cputime=302.767 memavail=7285700 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.7 pwm=0.000
Stats 800225.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633872 bytes_read=2247108 bytes_retransmit=9 bytes_invalid=0 send_seq=203981 receive_seq=203981 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=0 temp=60.5 pwm=0.000  sysload=0.23 cputime=302.790 memavail=7285700 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.4 pwm=0.000
Stats 800226.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633878 bytes_read=2247214 bytes_retransmit=9 bytes_invalid=0 send_seq=203982 receive_seq=203982 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=0 temp=60.4 pwm=0.000  sysload=0.21 cputime=302.809 memavail=7285848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.2 pwm=0.000
Stats 800227.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633884 bytes_read=2247364 bytes_retransmit=9 bytes_invalid=0 send_seq=203983 receive_seq=203983 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992846 heater_bed: target=0 temp=60.4 pwm=0.000  sysload=0.21 cputime=302.832 memavail=7285952 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.0 pwm=0.000
Stats 800228.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633890 bytes_read=2247470 bytes_retransmit=9 bytes_invalid=0 send_seq=203984 receive_seq=203984 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992834 heater_bed: target=0 temp=60.3 pwm=0.000  sysload=0.21 cputime=302.850 memavail=7285728 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.8 pwm=0.000
Stats 800229.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633896 bytes_read=2247576 bytes_retransmit=9 bytes_invalid=0 send_seq=203985 receive_seq=203985 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=0 temp=60.3 pwm=0.000  sysload=0.21 cputime=302.862 memavail=7285732 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.6 pwm=0.000
Stats 800230.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633902 bytes_read=2247712 bytes_retransmit=9 bytes_invalid=0 send_seq=203986 receive_seq=203986 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992816 heater_bed: target=0 temp=60.2 pwm=0.000  sysload=0.21 cputime=302.885 memavail=7286620 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.4 pwm=0.000
Stats 800231.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633908 bytes_read=2247818 bytes_retransmit=9 bytes_invalid=0 send_seq=203987 receive_seq=203987 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=0 temp=60.1 pwm=0.000  sysload=0.19 cputime=302.904 memavail=7286740 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.2 pwm=0.000
Stats 800232.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633914 bytes_read=2247938 bytes_retransmit=9 bytes_invalid=0 send_seq=203988 receive_seq=203988 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992843 heater_bed: target=0 temp=60.1 pwm=0.000  sysload=0.19 cputime=302.928 memavail=7286740 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.0 pwm=0.000
Stats 800233.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633920 bytes_read=2248074 bytes_retransmit=9 bytes_invalid=0 send_seq=203989 receive_seq=203989 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=0 temp=60.1 pwm=0.000  sysload=0.19 cputime=302.951 memavail=7286516 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.7 pwm=0.000
Stats 800234.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633926 bytes_read=2248180 bytes_retransmit=9 bytes_invalid=0 send_seq=203990 receive_seq=203990 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992843 heater_bed: target=0 temp=60.0 pwm=0.000  sysload=0.19 cputime=302.970 memavail=7286516 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.5 pwm=0.000
Stats 800235.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633932 bytes_read=2248286 bytes_retransmit=9 bytes_invalid=0 send_seq=203991 receive_seq=203991 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992836 heater_bed: target=0 temp=60.0 pwm=0.000  sysload=0.19 cputime=302.990 memavail=7286516 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.3 pwm=0.000
Stats 800236.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633938 bytes_read=2248422 bytes_retransmit=9 bytes_invalid=0 send_seq=203992 receive_seq=203992 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=0 temp=59.9 pwm=0.000  sysload=0.18 cputime=303.015 memavail=7286664 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.1 pwm=0.000
Stats 800237.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633944 bytes_read=2248542 bytes_retransmit=9 bytes_invalid=0 send_seq=203993 receive_seq=203993 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=0 temp=59.9 pwm=0.000  sysload=0.18 cputime=303.040 memavail=7286772 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.9 pwm=0.000
Stats 800238.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633950 bytes_read=2248648 bytes_retransmit=9 bytes_invalid=0 send_seq=203994 receive_seq=203994 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=0 temp=59.9 pwm=0.000  sysload=0.18 cputime=303.058 memavail=7286532 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.7 pwm=0.000
Stats 800239.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633956 bytes_read=2248784 bytes_retransmit=9 bytes_invalid=0 send_seq=203995 receive_seq=203995 retransmit_seq=17 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=0 temp=59.8 pwm=0.000  sysload=0.18 cputime=303.077 memavail=7286532 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.5 pwm=0.000
Stats 800240.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633962 bytes_read=2248890 bytes_retransmit=9 bytes_invalid=0 send_seq=203996 receive_seq=203996 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=0 temp=59.8 pwm=0.000  sysload=0.18 cputime=303.095 memavail=7286280 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.3 pwm=0.000
Stats 800241.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633968 bytes_read=2248996 bytes_retransmit=9 bytes_invalid=0 send_seq=203997 receive_seq=203997 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=0 temp=59.8 pwm=0.000  sysload=0.24 cputime=303.118 memavail=7286280 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.1 pwm=0.000
Stats 800242.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633974 bytes_read=2249146 bytes_retransmit=9 bytes_invalid=0 send_seq=203998 receive_seq=203998 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=0 temp=59.7 pwm=0.000  sysload=0.24 cputime=303.141 memavail=7286280 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.9 pwm=0.000
Stats 800243.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633980 bytes_read=2249252 bytes_retransmit=9 bytes_invalid=0 send_seq=203999 receive_seq=203999 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992801 heater_bed: target=0 temp=59.7 pwm=0.000  sysload=0.24 cputime=303.156 memavail=7286280 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.7 pwm=0.000
Stats 800244.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633986 bytes_read=2249358 bytes_retransmit=9 bytes_invalid=0 send_seq=204000 receive_seq=204000 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=0 temp=59.6 pwm=0.000  sysload=0.24 cputime=303.173 memavail=7286280 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.5 pwm=0.000
Stats 800245.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633992 bytes_read=2249494 bytes_retransmit=9 bytes_invalid=0 send_seq=204001 receive_seq=204001 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=0 temp=59.6 pwm=0.000  sysload=0.24 cputime=303.198 memavail=7286280 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.3 pwm=0.000
Stats 800246.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10633998 bytes_read=2249600 bytes_retransmit=9 bytes_invalid=0 send_seq=204002 receive_seq=204002 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992825 heater_bed: target=0 temp=59.5 pwm=0.000  sysload=0.22 cputime=303.220 memavail=7286280 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.1 pwm=0.000
Stats 800247.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634004 bytes_read=2249720 bytes_retransmit=9 bytes_invalid=0 send_seq=204003 receive_seq=204003 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=0 temp=59.5 pwm=0.000  sysload=0.22 cputime=303.240 memavail=7286280 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.9 pwm=0.000
Stats 800248.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634010 bytes_read=2249856 bytes_retransmit=9 bytes_invalid=0 send_seq=204004 receive_seq=204004 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=0 temp=59.5 pwm=0.000  sysload=0.22 cputime=303.263 memavail=7286280 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.7 pwm=0.000
Stats 800249.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634016 bytes_read=2249962 bytes_retransmit=9 bytes_invalid=0 send_seq=204005 receive_seq=204005 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=0 temp=59.4 pwm=0.000  sysload=0.22 cputime=303.287 memavail=7286280 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.5 pwm=0.000
Stats 800250.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634022 bytes_read=2250068 bytes_retransmit=9 bytes_invalid=0 send_seq=204006 receive_seq=204006 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=0 temp=59.4 pwm=0.000  sysload=0.22 cputime=303.305 memavail=7285776 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.3 pwm=0.000
Stats 800251.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634028 bytes_read=2250204 bytes_retransmit=9 bytes_invalid=0 send_seq=204007 receive_seq=204007 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=0 temp=59.4 pwm=0.000  sysload=0.29 cputime=303.324 memavail=7285780 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.1 pwm=0.000
Stats 800252.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634034 bytes_read=2250317 bytes_retransmit=9 bytes_invalid=0 send_seq=204008 receive_seq=204008 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992811 heater_bed: target=0 temp=59.3 pwm=0.000  sysload=0.29 cputime=303.340 memavail=7285780 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.9 pwm=0.000
Stats 800253.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634040 bytes_read=2250416 bytes_retransmit=9 bytes_invalid=0 send_seq=204009 receive_seq=204009 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992807 heater_bed: target=0 temp=59.3 pwm=0.000  sysload=0.29 cputime=303.361 memavail=7285780 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.8 pwm=0.000
Stats 800254.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634046 bytes_read=2250547 bytes_retransmit=9 bytes_invalid=0 send_seq=204010 receive_seq=204010 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=0 temp=59.2 pwm=0.000  sysload=0.29 cputime=303.382 memavail=7285780 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.5 pwm=0.000
Stats 800255.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634052 bytes_read=2250653 bytes_retransmit=9 bytes_invalid=0 send_seq=204011 receive_seq=204011 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=0 temp=59.2 pwm=0.000  sysload=0.29 cputime=303.400 memavail=7285780 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.3 pwm=0.000
Stats 800256.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634058 bytes_read=2250774 bytes_retransmit=9 bytes_invalid=0 send_seq=204012 receive_seq=204012 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=0 temp=59.1 pwm=0.000  sysload=0.34 cputime=303.416 memavail=7285780 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.2 pwm=0.000
Stats 800257.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634064 bytes_read=2250909 bytes_retransmit=9 bytes_invalid=0 send_seq=204013 receive_seq=204013 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992792 heater_bed: target=0 temp=59.1 pwm=0.000  sysload=0.34 cputime=303.434 memavail=7285780 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.0 pwm=0.000
Stats 800258.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634070 bytes_read=2251015 bytes_retransmit=9 bytes_invalid=0 send_seq=204014 receive_seq=204014 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=0 temp=59.1 pwm=0.000  sysload=0.34 cputime=303.459 memavail=7285556 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.7 pwm=0.000
Stats 800259.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634076 bytes_read=2251136 bytes_retransmit=9 bytes_invalid=0 send_seq=204015 receive_seq=204015 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=0 temp=59.0 pwm=0.000  sysload=0.34 cputime=303.478 memavail=7285304 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.6 pwm=0.000
Stats 800260.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634082 bytes_read=2251257 bytes_retransmit=9 bytes_invalid=0 send_seq=204016 receive_seq=204016 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=0 temp=59.0 pwm=0.000  sysload=0.34 cputime=303.495 memavail=7285452 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.4 pwm=0.000
Stats 800261.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634088 bytes_read=2251363 bytes_retransmit=9 bytes_invalid=0 send_seq=204017 receive_seq=204017 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=0 temp=58.9 pwm=0.000  sysload=0.40 cputime=303.517 memavail=7285560 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.2 pwm=0.000
Stats 800262.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634094 bytes_read=2251498 bytes_retransmit=9 bytes_invalid=0 send_seq=204018 receive_seq=204018 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992806 heater_bed: target=0 temp=58.9 pwm=0.000  sysload=0.40 cputime=303.537 memavail=7285560 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.0 pwm=0.000
Stats 800263.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634100 bytes_read=2251619 bytes_retransmit=9 bytes_invalid=0 send_seq=204019 receive_seq=204019 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992802 heater_bed: target=0 temp=58.9 pwm=0.000  sysload=0.40 cputime=303.555 memavail=7285336 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.8 pwm=0.000
Stats 800264.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634106 bytes_read=2251725 bytes_retransmit=9 bytes_invalid=0 send_seq=204020 receive_seq=204020 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 heater_bed: target=0 temp=58.8 pwm=0.000  sysload=0.40 cputime=303.570 memavail=7285340 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.7 pwm=0.000
Stats 800265.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634112 bytes_read=2251846 bytes_retransmit=9 bytes_invalid=0 send_seq=204021 receive_seq=204021 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992794 heater_bed: target=0 temp=58.8 pwm=0.000  sysload=0.40 cputime=303.589 memavail=7285340 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.5 pwm=0.000
Stats 800266.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634118 bytes_read=2251967 bytes_retransmit=9 bytes_invalid=0 send_seq=204022 receive_seq=204022 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=0 temp=58.7 pwm=0.000  sysload=0.68 cputime=303.609 memavail=7285340 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.3 pwm=0.000
Stats 800267.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634124 bytes_read=2252087 bytes_retransmit=9 bytes_invalid=0 send_seq=204023 receive_seq=204023 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=0 temp=58.7 pwm=0.000  sysload=0.68 cputime=303.628 memavail=7285500 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.1 pwm=0.000
Stats 800268.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634130 bytes_read=2252208 bytes_retransmit=9 bytes_invalid=0 send_seq=204024 receive_seq=204024 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992787 heater_bed: target=0 temp=58.7 pwm=0.000  sysload=0.68 cputime=303.646 memavail=7285092 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.9 pwm=0.000
Stats 800269.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634136 bytes_read=2252329 bytes_retransmit=9 bytes_invalid=0 send_seq=204025 receive_seq=204025 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=0 temp=58.6 pwm=0.000  sysload=0.68 cputime=303.670 memavail=7285092 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.7 pwm=0.000
Stats 800270.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634142 bytes_read=2252435 bytes_retransmit=9 bytes_invalid=0 send_seq=204026 receive_seq=204026 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992785 heater_bed: target=0 temp=58.7 pwm=0.000  sysload=0.68 cputime=303.696 memavail=7285092 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.5 pwm=0.000
Stats 800271.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634148 bytes_read=2252556 bytes_retransmit=9 bytes_invalid=0 send_seq=204027 receive_seq=204027 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992784 heater_bed: target=0 temp=58.6 pwm=0.000  sysload=0.95 cputime=303.724 memavail=7285348 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.4 pwm=0.000
Stats 800272.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634154 bytes_read=2252691 bytes_retransmit=9 bytes_invalid=0 send_seq=204028 receive_seq=204028 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992835 heater_bed: target=0 temp=58.5 pwm=0.000  sysload=0.95 cputime=303.754 memavail=7285348 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.2 pwm=0.000
Stats 800273.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634160 bytes_read=2252797 bytes_retransmit=9 bytes_invalid=0 send_seq=204029 receive_seq=204029 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992830 heater_bed: target=0 temp=58.5 pwm=0.000  sysload=0.95 cputime=303.781 memavail=7285600 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.1 pwm=0.000
Stats 800274.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634166 bytes_read=2252918 bytes_retransmit=9 bytes_invalid=0 send_seq=204030 receive_seq=204030 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=0 temp=58.5 pwm=0.000  sysload=0.95 cputime=303.812 memavail=7285600 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.9 pwm=0.000
Stats 800275.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634172 bytes_read=2253039 bytes_retransmit=9 bytes_invalid=0 send_seq=204031 receive_seq=204031 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=0 temp=58.4 pwm=0.000  sysload=0.95 cputime=303.842 memavail=7285600 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.7 pwm=0.000
Stats 800276.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634178 bytes_read=2253145 bytes_retransmit=9 bytes_invalid=0 send_seq=204032 receive_seq=204032 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=0 temp=58.3 pwm=0.000  sysload=0.87 cputime=303.867 memavail=7285600 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.5 pwm=0.000
Stats 800277.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634184 bytes_read=2253280 bytes_retransmit=9 bytes_invalid=0 send_seq=204033 receive_seq=204033 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992837 heater_bed: target=0 temp=58.3 pwm=0.000  sysload=0.87 cputime=303.889 memavail=7285600 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.3 pwm=0.000
Stats 800278.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634190 bytes_read=2253401 bytes_retransmit=9 bytes_invalid=0 send_seq=204034 receive_seq=204034 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992831 heater_bed: target=0 temp=58.3 pwm=0.000  sysload=0.87 cputime=303.910 memavail=7285600 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.1 pwm=0.000
Stats 800279.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634196 bytes_read=2253507 bytes_retransmit=9 bytes_invalid=0 send_seq=204035 receive_seq=204035 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=0 temp=58.3 pwm=0.000  sysload=0.87 cputime=303.936 memavail=7285600 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.9 pwm=0.000
Stats 800280.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634202 bytes_read=2253628 bytes_retransmit=9 bytes_invalid=0 send_seq=204036 receive_seq=204036 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992825 heater_bed: target=0 temp=58.2 pwm=0.000  sysload=0.87 cputime=303.958 memavail=7285540 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.8 pwm=0.000
Stats 800281.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634208 bytes_read=2253749 bytes_retransmit=9 bytes_invalid=0 send_seq=204037 receive_seq=204037 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=0 temp=58.2 pwm=0.000  sysload=0.80 cputime=303.983 memavail=7286360 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.6 pwm=0.000
Stats 800282.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634214 bytes_read=2253855 bytes_retransmit=9 bytes_invalid=0 send_seq=204038 receive_seq=204038 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992818 heater_bed: target=0 temp=58.1 pwm=0.000  sysload=0.80 cputime=304.004 memavail=7286360 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.4 pwm=0.000
Stats 800283.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634220 bytes_read=2253990 bytes_retransmit=9 bytes_invalid=0 send_seq=204039 receive_seq=204039 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=0 temp=58.1 pwm=0.000  sysload=0.80 cputime=304.029 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.3 pwm=0.000
Stats 800284.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634232 bytes_read=2254127 bytes_retransmit=9 bytes_invalid=0 send_seq=204041 receive_seq=204041 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992850 heater_bed: target=0 temp=58.0 pwm=0.000  sysload=0.80 cputime=304.058 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.1 pwm=0.000
Stats 800285.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634238 bytes_read=2254233 bytes_retransmit=9 bytes_invalid=0 send_seq=204042 receive_seq=204042 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=0 temp=58.0 pwm=0.000  sysload=0.80 cputime=304.080 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.9 pwm=0.000
Stats 800286.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634244 bytes_read=2254354 bytes_retransmit=9 bytes_invalid=0 send_seq=204043 receive_seq=204043 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=0 temp=58.0 pwm=0.000  sysload=0.74 cputime=304.099 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.8 pwm=0.000
Stats 800287.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634250 bytes_read=2254474 bytes_retransmit=9 bytes_invalid=0 send_seq=204044 receive_seq=204044 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992833 heater_bed: target=0 temp=57.9 pwm=0.000  sysload=0.74 cputime=304.119 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.6 pwm=0.000
Stats 800288.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634256 bytes_read=2254587 bytes_retransmit=9 bytes_invalid=0 send_seq=204045 receive_seq=204045 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992829 heater_bed: target=0 temp=57.9 pwm=0.000  sysload=0.74 cputime=304.144 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.4 pwm=0.000
Stats 800289.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634262 bytes_read=2254700 bytes_retransmit=9 bytes_invalid=0 send_seq=204046 receive_seq=204046 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992824 heater_bed: target=0 temp=57.9 pwm=0.000  sysload=0.74 cputime=304.164 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.3 pwm=0.000
Stats 800290.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634268 bytes_read=2254820 bytes_retransmit=9 bytes_invalid=0 send_seq=204047 receive_seq=204047 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=0 temp=57.8 pwm=0.000  sysload=0.74 cputime=304.182 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.1 pwm=0.000
Stats 800291.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634274 bytes_read=2254926 bytes_retransmit=9 bytes_invalid=0 send_seq=204048 receive_seq=204048 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=0 temp=57.8 pwm=0.000  sysload=0.68 cputime=304.199 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.9 pwm=0.000
Stats 800292.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634280 bytes_read=2255047 bytes_retransmit=9 bytes_invalid=0 send_seq=204049 receive_seq=204049 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=0 temp=57.8 pwm=0.000  sysload=0.68 cputime=304.216 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.8 pwm=0.000
Stats 800293.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634286 bytes_read=2255182 bytes_retransmit=9 bytes_invalid=0 send_seq=204050 receive_seq=204050 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=0 temp=57.7 pwm=0.000  sysload=0.68 cputime=304.243 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.6 pwm=0.000
Stats 800294.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634292 bytes_read=2255288 bytes_retransmit=9 bytes_invalid=0 send_seq=204051 receive_seq=204051 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992841 heater_bed: target=0 temp=57.7 pwm=0.000  sysload=0.68 cputime=304.263 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.4 pwm=0.000
Stats 800295.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634298 bytes_read=2255409 bytes_retransmit=9 bytes_invalid=0 send_seq=204052 receive_seq=204052 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992835 heater_bed: target=0 temp=57.7 pwm=0.000  sysload=0.68 cputime=304.283 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.3 pwm=0.000
Stats 800296.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634304 bytes_read=2255530 bytes_retransmit=9 bytes_invalid=0 send_seq=204053 receive_seq=204053 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=0 temp=57.6 pwm=0.000  sysload=0.63 cputime=304.300 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.1 pwm=0.000
Stats 800297.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634310 bytes_read=2255636 bytes_retransmit=9 bytes_invalid=0 send_seq=204054 receive_seq=204054 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992830 heater_bed: target=0 temp=57.6 pwm=0.000  sysload=0.63 cputime=304.320 memavail=7284848 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.9 pwm=0.000
Stats 800298.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634316 bytes_read=2255771 bytes_retransmit=9 bytes_invalid=0 send_seq=204055 receive_seq=204055 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=0 temp=57.5 pwm=0.000  sysload=0.63 cputime=304.340 memavail=7284596 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.8 pwm=0.000
Stats 800299.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634322 bytes_read=2255892 bytes_retransmit=9 bytes_invalid=0 send_seq=204056 receive_seq=204056 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=0 temp=57.5 pwm=0.000  sysload=0.63 cputime=304.359 memavail=7284596 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.6 pwm=0.000
Stats 800300.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634328 bytes_read=2255998 bytes_retransmit=9 bytes_invalid=0 send_seq=204057 receive_seq=204057 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=0 temp=57.5 pwm=0.000  sysload=0.63 cputime=304.374 memavail=7285336 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.5 pwm=0.000
Stats 800301.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634334 bytes_read=2256119 bytes_retransmit=9 bytes_invalid=0 send_seq=204058 receive_seq=204058 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=0 temp=57.4 pwm=0.000  sysload=0.58 cputime=304.396 memavail=7285336 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.3 pwm=0.000
Stats 800302.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634340 bytes_read=2256240 bytes_retransmit=9 bytes_invalid=0 send_seq=204059 receive_seq=204059 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=0 temp=57.4 pwm=0.000  sysload=0.58 cputime=304.423 memavail=7285360 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.1 pwm=0.000
Stats 800303.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634346 bytes_read=2256360 bytes_retransmit=9 bytes_invalid=0 send_seq=204060 receive_seq=204060 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=0 temp=57.4 pwm=0.000  sysload=0.58 cputime=304.443 memavail=7285360 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.0 pwm=0.000
Stats 800304.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634352 bytes_read=2256481 bytes_retransmit=9 bytes_invalid=0 send_seq=204061 receive_seq=204061 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=0 temp=57.3 pwm=0.000  sysload=0.58 cputime=304.464 memavail=7285360 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.8 pwm=0.000
Stats 800305.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634358 bytes_read=2256602 bytes_retransmit=9 bytes_invalid=0 send_seq=204062 receive_seq=204062 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=0 temp=57.3 pwm=0.000  sysload=0.58 cputime=304.487 memavail=7285360 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.7 pwm=0.000
Stats 800306.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634364 bytes_read=2256708 bytes_retransmit=9 bytes_invalid=0 send_seq=204063 receive_seq=204063 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=0 temp=57.2 pwm=0.000  sysload=0.61 cputime=304.513 memavail=7285360 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.5 pwm=0.000
Stats 800307.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634370 bytes_read=2256829 bytes_retransmit=9 bytes_invalid=0 send_seq=204064 receive_seq=204064 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=0 temp=57.2 pwm=0.000  sysload=0.61 cputime=304.535 memavail=7285360 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.4 pwm=0.000
Stats 800308.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634376 bytes_read=2256964 bytes_retransmit=9 bytes_invalid=0 send_seq=204065 receive_seq=204065 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=0 temp=57.2 pwm=0.000  sysload=0.61 cputime=304.555 memavail=7285360 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.2 pwm=0.000
Stats 800309.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634382 bytes_read=2257070 bytes_retransmit=9 bytes_invalid=0 send_seq=204066 receive_seq=204066 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992827 heater_bed: target=0 temp=57.1 pwm=0.000  sysload=0.61 cputime=304.576 memavail=7285360 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.0 pwm=0.000
Stats 800310.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634388 bytes_read=2257191 bytes_retransmit=9 bytes_invalid=0 send_seq=204067 receive_seq=204067 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992823 heater_bed: target=0 temp=57.1 pwm=0.000  sysload=0.61 cputime=304.597 memavail=7285256 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.9 pwm=0.000
Stats 800311.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634394 bytes_read=2257312 bytes_retransmit=9 bytes_invalid=0 send_seq=204068 receive_seq=204068 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992872 heater_bed: target=0 temp=57.1 pwm=0.000  sysload=0.64 cputime=304.624 memavail=7285364 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.7 pwm=0.000
Stats 800312.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634400 bytes_read=2257418 bytes_retransmit=9 bytes_invalid=0 send_seq=204069 receive_seq=204069 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=0 temp=57.0 pwm=0.000  sysload=0.64 cputime=304.647 memavail=7285364 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.6 pwm=0.000
Stats 800313.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634406 bytes_read=2257553 bytes_retransmit=9 bytes_invalid=0 send_seq=204070 receive_seq=204070 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=0 temp=57.0 pwm=0.000  sysload=0.64 cputime=304.671 memavail=7285364 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.5 pwm=0.000
Stats 800314.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634412 bytes_read=2257674 bytes_retransmit=9 bytes_invalid=0 send_seq=204071 receive_seq=204071 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=0 temp=56.9 pwm=0.000  sysload=0.64 cputime=304.688 memavail=7285364 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.3 pwm=0.000
Stats 800315.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634418 bytes_read=2257780 bytes_retransmit=9 bytes_invalid=0 send_seq=204072 receive_seq=204072 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992890 heater_bed: target=0 temp=56.9 pwm=0.000  sysload=0.64 cputime=304.717 memavail=7285364 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.1 pwm=0.000
Stats 800316.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634424 bytes_read=2257901 bytes_retransmit=9 bytes_invalid=0 send_seq=204073 receive_seq=204073 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992883 heater_bed: target=0 temp=56.9 pwm=0.000  sysload=0.75 cputime=304.740 memavail=7285364 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.0 pwm=0.000
Stats 800317.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634430 bytes_read=2258022 bytes_retransmit=9 bytes_invalid=0 send_seq=204074 receive_seq=204074 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992875 heater_bed: target=0 temp=56.9 pwm=0.000  sysload=0.75 cputime=304.759 memavail=7285364 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.8 pwm=0.000
Stats 800318.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634436 bytes_read=2258142 bytes_retransmit=9 bytes_invalid=0 send_seq=204075 receive_seq=204075 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992880 heater_bed: target=0 temp=56.8 pwm=0.000  sysload=0.75 cputime=304.777 memavail=7285364 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.7 pwm=0.000
Stats 800319.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634442 bytes_read=2258263 bytes_retransmit=9 bytes_invalid=0 send_seq=204076 receive_seq=204076 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992873 heater_bed: target=0 temp=56.8 pwm=0.000  sysload=0.75 cputime=304.800 memavail=7285364 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.6 pwm=0.000
Stats 800320.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634448 bytes_read=2258384 bytes_retransmit=9 bytes_invalid=0 send_seq=204077 receive_seq=204077 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992888 heater_bed: target=0 temp=56.7 pwm=0.000  sysload=0.75 cputime=304.826 memavail=7285372 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.4 pwm=0.000
Stats 800321.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634454 bytes_read=2258490 bytes_retransmit=9 bytes_invalid=0 send_seq=204078 receive_seq=204078 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992879 heater_bed: target=0 temp=56.7 pwm=0.000  sysload=0.85 cputime=304.847 memavail=7285372 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.3 pwm=0.000
Stats 800322.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634460 bytes_read=2258611 bytes_retransmit=9 bytes_invalid=0 send_seq=204079 receive_seq=204079 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992870 heater_bed: target=0 temp=56.7 pwm=0.000  sysload=0.85 cputime=304.866 memavail=7285372 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.1 pwm=0.000
Stats 800323.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634466 bytes_read=2258744 bytes_retransmit=9 bytes_invalid=0 send_seq=204080 receive_seq=204080 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992863 heater_bed: target=0 temp=56.6 pwm=0.000  sysload=0.85 cputime=304.889 memavail=7285372 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.0 pwm=0.000
Stats 800324.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634472 bytes_read=2258843 bytes_retransmit=9 bytes_invalid=0 send_seq=204081 receive_seq=204081 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=0 temp=56.6 pwm=0.000  sysload=0.85 cputime=304.914 memavail=7285372 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.8 pwm=0.000
Stats 800325.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634478 bytes_read=2258957 bytes_retransmit=9 bytes_invalid=0 send_seq=204082 receive_seq=204082 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=0 temp=56.6 pwm=0.000  sysload=0.85 cputime=304.934 memavail=7285372 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.7 pwm=0.000
Stats 800326.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634484 bytes_read=2259078 bytes_retransmit=9 bytes_invalid=0 send_seq=204083 receive_seq=204083 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=0 temp=56.6 pwm=0.000  sysload=0.86 cputime=304.951 memavail=7285372 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.5 pwm=0.000
Stats 800327.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634490 bytes_read=2259184 bytes_retransmit=9 bytes_invalid=0 send_seq=204084 receive_seq=204084 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992840 heater_bed: target=0 temp=56.5 pwm=0.000  sysload=0.86 cputime=304.970 memavail=7285372 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.4 pwm=0.000
Stats 800328.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634496 bytes_read=2259319 bytes_retransmit=9 bytes_invalid=0 send_seq=204085 receive_seq=204085 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992835 heater_bed: target=0 temp=56.5 pwm=0.000  sysload=0.86 cputime=304.986 memavail=7285372 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.3 pwm=0.000
Stats 800329.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634502 bytes_read=2259440 bytes_retransmit=9 bytes_invalid=0 send_seq=204086 receive_seq=204086 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992830 heater_bed: target=0 temp=56.4 pwm=0.000  sysload=0.86 cputime=305.012 memavail=7285372 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.1 pwm=0.000
Stats 800330.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634508 bytes_read=2259546 bytes_retransmit=9 bytes_invalid=0 send_seq=204087 receive_seq=204087 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992826 heater_bed: target=0 temp=56.4 pwm=0.000  sysload=0.86 cputime=305.031 memavail=7285120 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.0 pwm=0.000
Stats 800331.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634514 bytes_read=2259667 bytes_retransmit=9 bytes_invalid=0 send_seq=204088 receive_seq=204088 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=0 temp=56.4 pwm=0.000  sysload=0.95 cputime=305.051 memavail=7285124 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.8 pwm=0.000
Stats 800332.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634520 bytes_read=2259788 bytes_retransmit=9 bytes_invalid=0 send_seq=204089 receive_seq=204089 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=0 temp=56.3 pwm=0.000  sysload=0.95 cputime=305.072 memavail=7285124 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.7 pwm=0.000
Stats 800333.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634526 bytes_read=2259908 bytes_retransmit=9 bytes_invalid=0 send_seq=204090 receive_seq=204090 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=0 temp=56.3 pwm=0.000  sysload=0.95 cputime=305.099 memavail=7285124 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.5 pwm=0.000
Stats 800334.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634532 bytes_read=2260029 bytes_retransmit=9 bytes_invalid=0 send_seq=204091 receive_seq=204091 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992839 heater_bed: target=0 temp=56.3 pwm=0.000  sysload=0.95 cputime=305.127 memavail=7285124 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.4 pwm=0.000
Stats 800335.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634538 bytes_read=2260150 bytes_retransmit=9 bytes_invalid=0 send_seq=204092 receive_seq=204092 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992833 heater_bed: target=0 temp=56.2 pwm=0.000  sysload=0.95 cputime=305.149 memavail=7285124 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.2 pwm=0.000
Stats 800336.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634544 bytes_read=2260256 bytes_retransmit=9 bytes_invalid=0 send_seq=204093 receive_seq=204093 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=0 temp=56.2 pwm=0.000  sysload=0.96 cputime=305.167 memavail=7285124 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.1 pwm=0.000
Stats 800337.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634550 bytes_read=2260377 bytes_retransmit=9 bytes_invalid=0 send_seq=204094 receive_seq=204094 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992824 heater_bed: target=0 temp=56.2 pwm=0.000  sysload=0.96 cputime=305.187 memavail=7285124 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.0 pwm=0.000
Stats 800338.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634556 bytes_read=2260512 bytes_retransmit=9 bytes_invalid=0 send_seq=204095 receive_seq=204095 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992826 heater_bed: target=0 temp=56.1 pwm=0.000  sysload=0.96 cputime=305.213 memavail=7285124 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.8 pwm=0.000
Stats 800339.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634562 bytes_read=2260618 bytes_retransmit=9 bytes_invalid=0 send_seq=204096 receive_seq=204096 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992825 heater_bed: target=0 temp=56.1 pwm=0.000  sysload=0.96 cputime=305.234 memavail=7285124 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.7 pwm=0.000
Stats 800340.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634568 bytes_read=2260739 bytes_retransmit=9 bytes_invalid=0 send_seq=204097 receive_seq=204097 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=0 temp=56.1 pwm=0.000  sysload=0.96 cputime=305.265 memavail=7278704 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.6 pwm=0.000
Stats 800341.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634574 bytes_read=2260860 bytes_retransmit=9 bytes_invalid=0 send_seq=204098 receive_seq=204098 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=0 temp=56.0 pwm=0.000  sysload=1.20 cputime=305.289 memavail=7284856 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.4 pwm=0.000
Stats 800342.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634580 bytes_read=2260966 bytes_retransmit=9 bytes_invalid=0 send_seq=204099 receive_seq=204099 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992811 heater_bed: target=0 temp=56.0 pwm=0.000  sysload=1.20 cputime=305.304 memavail=7284856 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.3 pwm=0.000
Stats 800343.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634586 bytes_read=2261101 bytes_retransmit=9 bytes_invalid=0 send_seq=204100 receive_seq=204100 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992804 heater_bed: target=0 temp=56.0 pwm=0.000  sysload=1.20 cputime=305.321 memavail=7284856 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.2 pwm=0.000
Stats 800344.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634592 bytes_read=2261222 bytes_retransmit=9 bytes_invalid=0 send_seq=204101 receive_seq=204101 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992797 heater_bed: target=0 temp=55.9 pwm=0.000  sysload=1.20 cputime=305.339 memavail=7284856 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.0 pwm=0.000
Stats 800345.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634604 bytes_read=2261344 bytes_retransmit=9 bytes_invalid=0 send_seq=204103 receive_seq=204103 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992793 heater_bed: target=0 temp=55.9 pwm=0.000  sysload=1.20 cputime=305.364 memavail=7284856 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.9 pwm=0.000
Stats 800346.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634610 bytes_read=2261465 bytes_retransmit=9 bytes_invalid=0 send_seq=204104 receive_seq=204104 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992791 heater_bed: target=0 temp=55.8 pwm=0.000  sysload=1.27 cputime=305.389 memavail=7284856 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.8 pwm=0.000
Stats 800347.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634616 bytes_read=2261586 bytes_retransmit=9 bytes_invalid=0 send_seq=204105 receive_seq=204105 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992789 heater_bed: target=0 temp=55.8 pwm=0.000  sysload=1.27 cputime=305.411 memavail=7284856 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.6 pwm=0.000
Stats 800348.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634622 bytes_read=2261706 bytes_retransmit=9 bytes_invalid=0 send_seq=204106 receive_seq=204106 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992788 heater_bed: target=0 temp=55.8 pwm=0.000  sysload=1.27 cputime=305.432 memavail=7284856 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.5 pwm=0.000
Stats 800349.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634628 bytes_read=2261827 bytes_retransmit=9 bytes_invalid=0 send_seq=204107 receive_seq=204107 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992786 heater_bed: target=0 temp=55.7 pwm=0.000  sysload=1.27 cputime=305.450 memavail=7284856 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.4 pwm=0.000
Stats 800350.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634634 bytes_read=2261948 bytes_retransmit=9 bytes_invalid=0 send_seq=204108 receive_seq=204108 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992815 heater_bed: target=0 temp=55.7 pwm=0.000  sysload=1.27 cputime=305.470 memavail=7284632 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.2 pwm=0.000
Stats 800351.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634640 bytes_read=2262054 bytes_retransmit=9 bytes_invalid=0 send_seq=204109 receive_seq=204109 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=0 temp=55.7 pwm=0.000  sysload=1.24 cputime=305.491 memavail=7284636 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.1 pwm=0.000
Stats 800352.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634646 bytes_read=2262175 bytes_retransmit=9 bytes_invalid=0 send_seq=204110 receive_seq=204110 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992809 heater_bed: target=0 temp=55.7 pwm=0.000  sysload=1.24 cputime=305.510 memavail=7284636 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.0 pwm=0.000
Stats 800353.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634652 bytes_read=2262310 bytes_retransmit=9 bytes_invalid=0 send_seq=204111 receive_seq=204111 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992808 heater_bed: target=0 temp=55.6 pwm=0.000  sysload=1.24 cputime=305.534 memavail=7284636 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.8 pwm=0.000
Stats 800354.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634658 bytes_read=2262416 bytes_retransmit=9 bytes_invalid=0 send_seq=204112 receive_seq=204112 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992838 heater_bed: target=0 temp=55.6 pwm=0.000  sysload=1.24 cputime=305.555 memavail=7284636 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.7 pwm=0.000
Stats 800355.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634664 bytes_read=2262537 bytes_retransmit=9 bytes_invalid=0 send_seq=204113 receive_seq=204113 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992835 heater_bed: target=0 temp=55.6 pwm=0.000  sysload=1.24 cputime=305.574 memavail=7284636 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.6 pwm=0.000
Stats 800356.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634670 bytes_read=2262658 bytes_retransmit=9 bytes_invalid=0 send_seq=204114 receive_seq=204114 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992832 heater_bed: target=0 temp=55.5 pwm=0.000  sysload=1.14 cputime=305.594 memavail=7284636 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.4 pwm=0.000
Stats 800357.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634676 bytes_read=2262764 bytes_retransmit=9 bytes_invalid=0 send_seq=204115 receive_seq=204115 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=0 temp=55.5 pwm=0.000  sysload=1.14 cputime=305.617 memavail=7284412 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.3 pwm=0.000
Stats 800358.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634682 bytes_read=2262899 bytes_retransmit=9 bytes_invalid=0 send_seq=204116 receive_seq=204116 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=0 temp=55.4 pwm=0.000  sysload=1.14 cputime=305.639 memavail=7284412 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.2 pwm=0.000
Stats 800359.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634688 bytes_read=2263015 bytes_retransmit=9 bytes_invalid=0 send_seq=204117 receive_seq=204117 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992828 heater_bed: target=0 temp=55.4 pwm=0.000  sysload=1.14 cputime=305.664 memavail=7284412 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.1 pwm=0.000
Stats 800360.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634694 bytes_read=2263114 bytes_retransmit=9 bytes_invalid=0 send_seq=204118 receive_seq=204118 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992824 heater_bed: target=0 temp=55.4 pwm=0.000  sysload=1.14 cputime=305.682 memavail=7284856 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.9 pwm=0.000
Stats 800361.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634700 bytes_read=2263244 bytes_retransmit=9 bytes_invalid=0 send_seq=204119 receive_seq=204119 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=0 temp=55.4 pwm=0.000  sysload=1.05 cputime=305.703 memavail=7284916 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.8 pwm=0.000
Stats 800362.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634706 bytes_read=2263350 bytes_retransmit=9 bytes_invalid=0 send_seq=204120 receive_seq=204120 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992820 heater_bed: target=0 temp=55.3 pwm=0.000  sysload=1.05 cputime=305.729 memavail=7284916 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.7 pwm=0.000
Stats 800363.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634712 bytes_read=2263470 bytes_retransmit=9 bytes_invalid=0 send_seq=204121 receive_seq=204121 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992819 heater_bed: target=0 temp=55.3 pwm=0.000  sysload=1.05 cputime=305.750 memavail=7284916 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.6 pwm=0.000
Stats 800364.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634718 bytes_read=2263606 bytes_retransmit=9 bytes_invalid=0 send_seq=204122 receive_seq=204122 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=0 temp=55.3 pwm=0.000  sysload=1.05 cputime=305.773 memavail=7284916 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.4 pwm=0.000
Stats 800365.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634724 bytes_read=2263712 bytes_retransmit=9 bytes_invalid=0 send_seq=204123 receive_seq=204123 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=0 temp=55.2 pwm=0.000  sysload=1.05 cputime=305.793 memavail=7284916 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.3 pwm=0.000
Stats 800366.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634730 bytes_read=2263818 bytes_retransmit=9 bytes_invalid=0 send_seq=204124 receive_seq=204124 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992814 heater_bed: target=0 temp=55.2 pwm=0.000  sysload=0.97 cputime=305.817 memavail=7284916 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.2 pwm=0.000
Stats 800367.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634736 bytes_read=2263954 bytes_retransmit=9 bytes_invalid=0 send_seq=204125 receive_seq=204125 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992813 heater_bed: target=0 temp=55.2 pwm=0.000  sysload=0.97 cputime=305.842 memavail=7284916 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.0 pwm=0.000
Stats 800368.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634742 bytes_read=2264060 bytes_retransmit=9 bytes_invalid=0 send_seq=204126 receive_seq=204126 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992812 heater_bed: target=0 temp=55.1 pwm=0.000  sysload=0.97 cputime=305.862 memavail=7284916 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.9 pwm=0.000
Stats 800369.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634748 bytes_read=2264180 bytes_retransmit=9 bytes_invalid=0 send_seq=204127 receive_seq=204127 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992817 heater_bed: target=0 temp=55.1 pwm=0.000  sysload=0.97 cputime=305.885 memavail=7284692 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.8 pwm=0.000
Stats 800370.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634754 bytes_read=2264316 bytes_retransmit=9 bytes_invalid=0 send_seq=204128 receive_seq=204128 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992821 heater_bed: target=0 temp=55.1 pwm=0.000  sysload=0.97 cputime=305.911 memavail=7284928 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.7 pwm=0.000
Stats 800371.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634760 bytes_read=2264422 bytes_retransmit=9 bytes_invalid=0 send_seq=204129 receive_seq=204129 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992822 heater_bed: target=0 temp=55.0 pwm=0.000  sysload=0.97 cputime=305.935 memavail=7284952 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.6 pwm=0.000
Stats 800372.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634766 bytes_read=2264528 bytes_retransmit=9 bytes_invalid=0 send_seq=204130 receive_seq=204130 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992862 heater_bed: target=0 temp=55.0 pwm=0.000  sysload=0.97 cputime=305.954 memavail=7284952 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.5 pwm=0.000
Stats 800373.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634772 bytes_read=2264664 bytes_retransmit=9 bytes_invalid=0 send_seq=204131 receive_seq=204131 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=0 temp=55.0 pwm=0.000  sysload=0.97 cputime=305.974 memavail=7284952 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.3 pwm=0.000
Stats 800374.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634778 bytes_read=2264784 bytes_retransmit=9 bytes_invalid=0 send_seq=204132 receive_seq=204132 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992852 heater_bed: target=0 temp=54.9 pwm=0.000  sysload=0.97 cputime=305.994 memavail=7284952 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.2 pwm=0.000
Stats 800375.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634784 bytes_read=2264890 bytes_retransmit=9 bytes_invalid=0 send_seq=204133 receive_seq=204133 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992847 heater_bed: target=0 temp=54.9 pwm=0.000  sysload=0.97 cputime=306.016 memavail=7284952 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.1 pwm=0.000
Stats 800376.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634790 bytes_read=2265026 bytes_retransmit=9 bytes_invalid=0 send_seq=204134 receive_seq=204134 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992846 heater_bed: target=0 temp=54.9 pwm=0.000  sysload=0.89 cputime=306.038 memavail=7284952 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.0 pwm=0.000
Stats 800377.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634796 bytes_read=2265132 bytes_retransmit=9 bytes_invalid=0 send_seq=204135 receive_seq=204135 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992846 heater_bed: target=0 temp=54.8 pwm=0.000  sysload=0.89 cputime=306.056 memavail=7284952 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.9 pwm=0.000
Stats 800378.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634802 bytes_read=2265238 bytes_retransmit=9 bytes_invalid=0 send_seq=204136 receive_seq=204136 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992849 heater_bed: target=0 temp=54.8 pwm=0.000  sysload=0.89 cputime=306.072 memavail=7284952 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.8 pwm=0.000
Stats 800379.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634808 bytes_read=2265388 bytes_retransmit=9 bytes_invalid=0 send_seq=204137 receive_seq=204137 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992845 heater_bed: target=0 temp=54.8 pwm=0.000  sysload=0.89 cputime=306.091 memavail=7284728 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.6 pwm=0.000
Stats 800380.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634814 bytes_read=2265494 bytes_retransmit=9 bytes_invalid=0 send_seq=204138 receive_seq=204138 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992844 heater_bed: target=0 temp=54.7 pwm=0.000  sysload=0.89 cputime=306.115 memavail=7284988 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.5 pwm=0.000
Stats 800381.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634820 bytes_read=2265600 bytes_retransmit=9 bytes_invalid=0 send_seq=204139 receive_seq=204139 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=0 temp=54.7 pwm=0.000  sysload=0.82 cputime=306.137 memavail=7284988 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.4 pwm=0.000
Stats 800382.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634826 bytes_read=2265736 bytes_retransmit=9 bytes_invalid=0 send_seq=204140 receive_seq=204140 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992889 heater_bed: target=0 temp=54.7 pwm=0.000  sysload=0.82 cputime=306.156 memavail=7284988 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.3 pwm=0.000
Stats 800383.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634832 bytes_read=2265842 bytes_retransmit=9 bytes_invalid=0 send_seq=204141 receive_seq=204141 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992886 heater_bed: target=0 temp=54.7 pwm=0.000  sysload=0.82 cputime=306.176 memavail=7284988 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.2 pwm=0.000
Stats 800384.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634838 bytes_read=2265962 bytes_retransmit=9 bytes_invalid=0 send_seq=204142 receive_seq=204142 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=0 temp=54.6 pwm=0.000  sysload=0.82 cputime=306.196 memavail=7284988 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.1 pwm=0.000
Stats 800385.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634844 bytes_read=2266098 bytes_retransmit=9 bytes_invalid=0 send_seq=204143 receive_seq=204143 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992881 heater_bed: target=0 temp=54.6 pwm=0.000  sysload=0.82 cputime=306.214 memavail=7284988 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.9 pwm=0.000
Stats 800386.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634850 bytes_read=2266204 bytes_retransmit=9 bytes_invalid=0 send_seq=204144 receive_seq=204144 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992875 heater_bed: target=0 temp=54.5 pwm=0.000  sysload=0.75 cputime=306.231 memavail=7284988 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.8 pwm=0.000
Stats 800387.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634856 bytes_read=2266325 bytes_retransmit=9 bytes_invalid=0 send_seq=204145 receive_seq=204145 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992872 heater_bed: target=0 temp=54.5 pwm=0.000  sysload=0.75 cputime=306.259 memavail=7284988 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.7 pwm=0.000
Stats 800388.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634862 bytes_read=2266446 bytes_retransmit=9 bytes_invalid=0 send_seq=204146 receive_seq=204146 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992866 heater_bed: target=0 temp=54.5 pwm=0.000  sysload=0.75 cputime=306.288 memavail=7284988 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.6 pwm=0.000
Stats 800389.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634868 bytes_read=2266566 bytes_retransmit=9 bytes_invalid=0 send_seq=204147 receive_seq=204147 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992861 heater_bed: target=0 temp=54.4 pwm=0.000  sysload=0.75 cputime=306.319 memavail=7284988 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.5 pwm=0.000
Stats 800390.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634874 bytes_read=2266687 bytes_retransmit=9 bytes_invalid=0 send_seq=204148 receive_seq=204148 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992883 heater_bed: target=0 temp=54.4 pwm=0.000  sysload=0.75 cputime=306.344 memavail=7285476 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.3 pwm=0.000
Stats 800391.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634880 bytes_read=2266808 bytes_retransmit=9 bytes_invalid=0 send_seq=204149 receive_seq=204149 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992880 heater_bed: target=0 temp=54.4 pwm=0.000  sysload=0.69 cputime=306.368 memavail=7285496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.2 pwm=0.000
Stats 800392.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634886 bytes_read=2266914 bytes_retransmit=9 bytes_invalid=0 send_seq=204150 receive_seq=204150 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992875 heater_bed: target=0 temp=54.4 pwm=0.000  sysload=0.69 cputime=306.392 memavail=7285496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.1 pwm=0.000
Stats 800393.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634892 bytes_read=2267035 bytes_retransmit=9 bytes_invalid=0 send_seq=204151 receive_seq=204151 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992872 heater_bed: target=0 temp=54.3 pwm=0.000  sysload=0.69 cputime=306.419 memavail=7285496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.0 pwm=0.000
Stats 800394.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634898 bytes_read=2267170 bytes_retransmit=9 bytes_invalid=0 send_seq=204152 receive_seq=204152 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992869 heater_bed: target=0 temp=54.3 pwm=0.000  sysload=0.69 cputime=306.441 memavail=7285496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.9 pwm=0.000
Stats 800395.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634904 bytes_read=2267271 bytes_retransmit=9 bytes_invalid=0 send_seq=204153 receive_seq=204153 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992864 heater_bed: target=0 temp=54.2 pwm=0.000  sysload=0.69 cputime=306.461 memavail=7285496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.8 pwm=0.000
Stats 800396.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634910 bytes_read=2267384 bytes_retransmit=9 bytes_invalid=0 send_seq=204154 receive_seq=204154 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992861 heater_bed: target=0 temp=54.2 pwm=0.000  sysload=0.64 cputime=306.482 memavail=7285496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.7 pwm=0.000
Stats 800397.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634916 bytes_read=2267501 bytes_retransmit=9 bytes_invalid=0 send_seq=204155 receive_seq=204155 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=0 temp=54.2 pwm=0.000  sysload=0.64 cputime=306.507 memavail=7285496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.6 pwm=0.000
Stats 800398.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634922 bytes_read=2267607 bytes_retransmit=9 bytes_invalid=0 send_seq=204156 receive_seq=204156 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=0 temp=54.2 pwm=0.000  sysload=0.64 cputime=306.531 memavail=7285496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.5 pwm=0.000
Stats 800399.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634928 bytes_read=2267742 bytes_retransmit=9 bytes_invalid=0 send_seq=204157 receive_seq=204157 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992879 heater_bed: target=0 temp=54.1 pwm=0.000  sysload=0.64 cputime=306.557 memavail=7285496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.4 pwm=0.000
Stats 800400.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634934 bytes_read=2267863 bytes_retransmit=9 bytes_invalid=0 send_seq=204158 receive_seq=204158 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=0 temp=54.1 pwm=0.000  sysload=0.64 cputime=306.578 memavail=7285404 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.3 pwm=0.000
Stats 800401.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634940 bytes_read=2267969 bytes_retransmit=9 bytes_invalid=0 send_seq=204159 receive_seq=204159 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992869 heater_bed: target=0 temp=54.1 pwm=0.000  sysload=0.59 cputime=306.601 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.1 pwm=0.000
Stats 800402.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634946 bytes_read=2268090 bytes_retransmit=9 bytes_invalid=0 send_seq=204160 receive_seq=204160 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992866 heater_bed: target=0 temp=54.0 pwm=0.000  sysload=0.59 cputime=306.628 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.1 pwm=0.000
Stats 800403.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634952 bytes_read=2268211 bytes_retransmit=9 bytes_invalid=0 send_seq=204161 receive_seq=204161 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992864 heater_bed: target=0 temp=54.0 pwm=0.000  sysload=0.59 cputime=306.649 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.9 pwm=0.000
Stats 800404.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634958 bytes_read=2268331 bytes_retransmit=9 bytes_invalid=0 send_seq=204162 receive_seq=204162 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992860 heater_bed: target=0 temp=54.0 pwm=0.000  sysload=0.59 cputime=306.672 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.8 pwm=0.000
Stats 800405.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634964 bytes_read=2268452 bytes_retransmit=9 bytes_invalid=0 send_seq=204163 receive_seq=204163 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=0 temp=53.9 pwm=0.000  sysload=0.59 cputime=306.698 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.7 pwm=0.000
Stats 800406.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634976 bytes_read=2268589 bytes_retransmit=9 bytes_invalid=0 send_seq=204165 receive_seq=204165 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992850 heater_bed: target=0 temp=53.9 pwm=0.000  sysload=0.54 cputime=306.722 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.6 pwm=0.000
Stats 800407.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634982 bytes_read=2268695 bytes_retransmit=9 bytes_invalid=0 send_seq=204166 receive_seq=204166 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992890 heater_bed: target=0 temp=53.9 pwm=0.000  sysload=0.54 cputime=306.750 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.5 pwm=0.000
Stats 800408.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634988 bytes_read=2268816 bytes_retransmit=9 bytes_invalid=0 send_seq=204167 receive_seq=204167 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992885 heater_bed: target=0 temp=53.9 pwm=0.000  sysload=0.54 cputime=306.771 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.4 pwm=0.000
Stats 800409.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10634994 bytes_read=2268951 bytes_retransmit=9 bytes_invalid=0 send_seq=204168 receive_seq=204168 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992884 heater_bed: target=0 temp=53.8 pwm=0.000  sysload=0.54 cputime=306.788 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.3 pwm=0.000
Stats 800410.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635000 bytes_read=2269057 bytes_retransmit=9 bytes_invalid=0 send_seq=204169 receive_seq=204169 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=0 temp=53.8 pwm=0.000  sysload=0.54 cputime=306.808 memavail=7285764 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.2 pwm=0.000
Stats 800411.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635006 bytes_read=2269178 bytes_retransmit=9 bytes_invalid=0 send_seq=204170 receive_seq=204170 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992881 heater_bed: target=0 temp=53.8 pwm=0.000  sysload=0.50 cputime=306.831 memavail=7285780 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.1 pwm=0.000
Stats 800412.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635012 bytes_read=2269299 bytes_retransmit=9 bytes_invalid=0 send_seq=204171 receive_seq=204171 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992875 heater_bed: target=0 temp=53.7 pwm=0.000  sysload=0.50 cputime=306.851 memavail=7285780 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.0 pwm=0.000
Stats 800413.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635018 bytes_read=2269405 bytes_retransmit=9 bytes_invalid=0 send_seq=204172 receive_seq=204172 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992871 heater_bed: target=0 temp=53.7 pwm=0.000  sysload=0.50 cputime=306.869 memavail=7285780 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.9 pwm=0.000
Stats 800414.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635024 bytes_read=2269540 bytes_retransmit=9 bytes_invalid=0 send_seq=204173 receive_seq=204173 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992869 heater_bed: target=0 temp=53.7 pwm=0.000  sysload=0.50 cputime=306.887 memavail=7285780 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.8 pwm=0.000
Stats 800415.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635030 bytes_read=2269661 bytes_retransmit=9 bytes_invalid=0 send_seq=204174 receive_seq=204174 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992867 heater_bed: target=0 temp=53.7 pwm=0.000  sysload=0.50 cputime=306.911 memavail=7285780 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.7 pwm=0.000
Stats 800416.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635036 bytes_read=2269767 bytes_retransmit=9 bytes_invalid=0 send_seq=204175 receive_seq=204175 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992874 heater_bed: target=0 temp=53.6 pwm=0.000  sysload=0.54 cputime=306.935 memavail=7285780 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.6 pwm=0.000
Stats 800417.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635042 bytes_read=2269888 bytes_retransmit=9 bytes_invalid=0 send_seq=204176 receive_seq=204176 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992868 heater_bed: target=0 temp=53.6 pwm=0.000  sysload=0.54 cputime=306.954 memavail=7285332 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.5 pwm=0.000
Stats 800418.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635048 bytes_read=2270009 bytes_retransmit=9 bytes_invalid=0 send_seq=204177 receive_seq=204177 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992864 heater_bed: target=0 temp=53.5 pwm=0.000  sysload=0.54 cputime=306.970 memavail=7285332 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.4 pwm=0.000
Stats 800419.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635054 bytes_read=2270129 bytes_retransmit=9 bytes_invalid=0 send_seq=204178 receive_seq=204178 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992860 heater_bed: target=0 temp=53.5 pwm=0.000  sysload=0.54 cputime=306.995 memavail=7285332 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.3 pwm=0.000
Stats 800420.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635060 bytes_read=2270250 bytes_retransmit=9 bytes_invalid=0 send_seq=204179 receive_seq=204179 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992857 heater_bed: target=0 temp=53.5 pwm=0.000  sysload=0.54 cputime=307.015 memavail=7284736 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.2 pwm=0.000
Stats 800421.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635066 bytes_read=2270371 bytes_retransmit=9 bytes_invalid=0 send_seq=204180 receive_seq=204180 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992855 heater_bed: target=0 temp=53.5 pwm=0.000  sysload=0.49 cputime=307.034 memavail=7284832 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.1 pwm=0.000
Stats 800422.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635072 bytes_read=2270477 bytes_retransmit=9 bytes_invalid=0 send_seq=204181 receive_seq=204181 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992853 heater_bed: target=0 temp=53.4 pwm=0.000  sysload=0.49 cputime=307.051 memavail=7284832 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.0 pwm=0.000
Stats 800423.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635078 bytes_read=2270598 bytes_retransmit=9 bytes_invalid=0 send_seq=204182 receive_seq=204182 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992850 heater_bed: target=0 temp=53.4 pwm=0.000  sysload=0.49 cputime=307.075 memavail=7284832 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.9 pwm=0.000
Stats 800424.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635084 bytes_read=2270733 bytes_retransmit=9 bytes_invalid=0 send_seq=204183 receive_seq=204183 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992851 heater_bed: target=0 temp=53.4 pwm=0.000  sysload=0.49 cputime=307.098 memavail=7284832 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.8 pwm=0.000
Stats 800425.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635090 bytes_read=2270839 bytes_retransmit=9 bytes_invalid=0 send_seq=204184 receive_seq=204184 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992916 heater_bed: target=0 temp=53.4 pwm=0.000  sysload=0.49 cputime=307.119 memavail=7284832 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.7 pwm=0.000
Stats 800426.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635096 bytes_read=2270960 bytes_retransmit=9 bytes_invalid=0 send_seq=204185 receive_seq=204185 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992908 heater_bed: target=0 temp=53.3 pwm=0.000  sysload=0.45 cputime=307.136 memavail=7284832 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.6 pwm=0.000
Stats 800427.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635102 bytes_read=2271081 bytes_retransmit=9 bytes_invalid=0 send_seq=204186 receive_seq=204186 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992899 heater_bed: target=0 temp=53.3 pwm=0.000  sysload=0.45 cputime=307.159 memavail=7284832 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.5 pwm=0.000
Stats 800428.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635108 bytes_read=2271187 bytes_retransmit=9 bytes_invalid=0 send_seq=204187 receive_seq=204187 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=0 temp=53.2 pwm=0.000  sysload=0.45 cputime=307.179 memavail=7284832 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.4 pwm=0.000
Stats 800429.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635114 bytes_read=2271322 bytes_retransmit=9 bytes_invalid=0 send_seq=204188 receive_seq=204188 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992891 heater_bed: target=0 temp=53.2 pwm=0.000  sysload=0.45 cputime=307.199 memavail=7284832 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.3 pwm=0.000
Stats 800430.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635120 bytes_read=2271443 bytes_retransmit=9 bytes_invalid=0 send_seq=204189 receive_seq=204189 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992886 heater_bed: target=0 temp=53.2 pwm=0.000  sysload=0.45 cputime=307.215 memavail=7284104 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.2 pwm=0.000
Stats 800431.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635126 bytes_read=2271541 bytes_retransmit=9 bytes_invalid=0 send_seq=204190 receive_seq=204190 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992881 heater_bed: target=0 temp=53.2 pwm=0.000  sysload=0.50 cputime=307.232 memavail=7284116 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.1 pwm=0.000
Stats 800432.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635132 bytes_read=2271654 bytes_retransmit=9 bytes_invalid=0 send_seq=204191 receive_seq=204191 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992882 heater_bed: target=0 temp=53.1 pwm=0.000  sysload=0.50 cputime=307.250 memavail=7284116 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.0 pwm=0.000
Stats 800433.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635138 bytes_read=2271774 bytes_retransmit=9 bytes_invalid=0 send_seq=204192 receive_seq=204192 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992878 heater_bed: target=0 temp=53.1 pwm=0.000  sysload=0.50 cputime=307.270 memavail=7284116 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.9 pwm=0.000
Stats 800434.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635144 bytes_read=2271894 bytes_retransmit=9 bytes_invalid=0 send_seq=204193 receive_seq=204193 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992901 heater_bed: target=0 temp=53.1 pwm=0.000  sysload=0.50 cputime=307.290 memavail=7284264 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.8 pwm=0.000
Stats 800435.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635150 bytes_read=2272015 bytes_retransmit=9 bytes_invalid=0 send_seq=204194 receive_seq=204194 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=0 temp=53.0 pwm=0.000  sysload=0.50 cputime=307.306 memavail=7284368 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.8 pwm=0.000
Stats 800436.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635156 bytes_read=2272136 bytes_retransmit=9 bytes_invalid=0 send_seq=204195 receive_seq=204195 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992890 heater_bed: target=0 temp=53.0 pwm=0.000  sysload=0.54 cputime=307.330 memavail=7284368 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.6 pwm=0.000
Stats 800437.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635162 bytes_read=2272242 bytes_retransmit=9 bytes_invalid=0 send_seq=204196 receive_seq=204196 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992897 heater_bed: target=0 temp=53.0 pwm=0.000  sysload=0.54 cputime=307.349 memavail=7284368 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.6 pwm=0.000
Stats 800438.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635168 bytes_read=2272363 bytes_retransmit=9 bytes_invalid=0 send_seq=204197 receive_seq=204197 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992895 heater_bed: target=0 temp=53.0 pwm=0.000  sysload=0.54 cputime=307.366 memavail=7284368 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.5 pwm=0.000
Stats 800439.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635174 bytes_read=2272484 bytes_retransmit=9 bytes_invalid=0 send_seq=204198 receive_seq=204198 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992890 heater_bed: target=0 temp=53.0 pwm=0.000  sysload=0.54 cputime=307.385 memavail=7284368 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.3 pwm=0.000
Stats 800440.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635180 bytes_read=2272604 bytes_retransmit=9 bytes_invalid=0 send_seq=204199 receive_seq=204199 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992886 heater_bed: target=0 temp=52.9 pwm=0.000  sysload=0.54 cputime=307.406 memavail=7284152 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.3 pwm=0.000
Stats 800441.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635186 bytes_read=2272725 bytes_retransmit=9 bytes_invalid=0 send_seq=204200 receive_seq=204200 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992884 heater_bed: target=0 temp=52.9 pwm=0.000  sysload=0.58 cputime=307.431 memavail=7284152 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.2 pwm=0.000
Stats 800442.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635192 bytes_read=2272846 bytes_retransmit=9 bytes_invalid=0 send_seq=204201 receive_seq=204201 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992881 heater_bed: target=0 temp=52.9 pwm=0.000  sysload=0.58 cputime=307.451 memavail=7284152 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.1 pwm=0.000
Stats 800443.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635198 bytes_read=2272952 bytes_retransmit=9 bytes_invalid=0 send_seq=204202 receive_seq=204202 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992931 heater_bed: target=0 temp=52.8 pwm=0.000  sysload=0.58 cputime=307.469 memavail=7284152 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.0 pwm=0.000
Stats 800444.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635204 bytes_read=2273073 bytes_retransmit=9 bytes_invalid=0 send_seq=204203 receive_seq=204203 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992922 heater_bed: target=0 temp=52.8 pwm=0.000  sysload=0.58 cputime=307.491 memavail=7284152 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.9 pwm=0.000
Stats 800445.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635210 bytes_read=2273208 bytes_retransmit=9 bytes_invalid=0 send_seq=204204 receive_seq=204204 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=0 temp=52.8 pwm=0.000  sysload=0.58 cputime=307.515 memavail=7284152 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.8 pwm=0.000
Stats 800446.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635216 bytes_read=2273314 bytes_retransmit=9 bytes_invalid=0 send_seq=204205 receive_seq=204205 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992917 heater_bed: target=0 temp=52.7 pwm=0.000  sysload=0.69 cputime=307.546 memavail=7284152 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.7 pwm=0.000
Stats 800447.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635222 bytes_read=2273435 bytes_retransmit=9 bytes_invalid=0 send_seq=204206 receive_seq=204206 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992912 heater_bed: target=0 temp=52.7 pwm=0.000  sysload=0.69 cputime=307.572 memavail=7284152 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.6 pwm=0.000
Stats 800448.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635228 bytes_read=2273556 bytes_retransmit=9 bytes_invalid=0 send_seq=204207 receive_seq=204207 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992906 heater_bed: target=0 temp=52.7 pwm=0.000  sysload=0.69 cputime=307.598 memavail=7284152 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.6 pwm=0.000
Stats 800449.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635234 bytes_read=2273662 bytes_retransmit=9 bytes_invalid=0 send_seq=204208 receive_seq=204208 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992900 heater_bed: target=0 temp=52.7 pwm=0.000  sysload=0.69 cputime=307.620 memavail=7284152 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.4 pwm=0.000
Stats 800450.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635240 bytes_read=2273797 bytes_retransmit=9 bytes_invalid=0 send_seq=204209 receive_seq=204209 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992905 heater_bed: target=0 temp=52.6 pwm=0.000  sysload=0.69 cputime=307.646 memavail=7283900 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.4 pwm=0.000
Stats 800451.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635246 bytes_read=2273918 bytes_retransmit=9 bytes_invalid=0 send_seq=204210 receive_seq=204210 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992902 heater_bed: target=0 temp=52.6 pwm=0.000  sysload=0.63 cputime=307.673 memavail=7283900 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.2 pwm=0.000
Stats 800452.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635252 bytes_read=2274024 bytes_retransmit=9 bytes_invalid=0 send_seq=204211 receive_seq=204211 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992950 heater_bed: target=0 temp=52.6 pwm=0.000  sysload=0.63 cputime=307.697 memavail=7283900 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.2 pwm=0.000
Stats 800453.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635258 bytes_read=2274145 bytes_retransmit=9 bytes_invalid=0 send_seq=204212 receive_seq=204212 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992945 heater_bed: target=0 temp=52.6 pwm=0.000  sysload=0.63 cputime=307.717 memavail=7283900 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.1 pwm=0.000
Stats 800454.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635264 bytes_read=2274266 bytes_retransmit=9 bytes_invalid=0 send_seq=204213 receive_seq=204213 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992935 heater_bed: target=0 temp=52.5 pwm=0.000  sysload=0.63 cputime=307.743 memavail=7283900 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.0 pwm=0.000
Stats 800455.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635270 bytes_read=2274386 bytes_retransmit=9 bytes_invalid=0 send_seq=204214 receive_seq=204214 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992928 heater_bed: target=0 temp=52.5 pwm=0.000  sysload=0.63 cputime=307.766 memavail=7283900 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.9 pwm=0.000
Stats 800456.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635276 bytes_read=2274507 bytes_retransmit=9 bytes_invalid=0 send_seq=204215 receive_seq=204215 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992953 heater_bed: target=0 temp=52.5 pwm=0.000  sysload=0.58 cputime=307.791 memavail=7283676 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.8 pwm=0.000
Stats 800457.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635282 bytes_read=2274628 bytes_retransmit=9 bytes_invalid=0 send_seq=204216 receive_seq=204216 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992944 heater_bed: target=0 temp=52.4 pwm=0.000  sysload=0.58 cputime=307.811 memavail=7283424 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.7 pwm=0.000
Stats 800458.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635288 bytes_read=2274734 bytes_retransmit=9 bytes_invalid=0 send_seq=204217 receive_seq=204217 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992936 heater_bed: target=0 temp=52.4 pwm=0.000  sysload=0.58 cputime=307.827 memavail=7283424 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.6 pwm=0.000
Stats 800459.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635294 bytes_read=2274855 bytes_retransmit=9 bytes_invalid=0 send_seq=204218 receive_seq=204218 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992925 heater_bed: target=0 temp=52.4 pwm=0.000  sysload=0.58 cputime=307.852 memavail=7283424 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.6 pwm=0.000
Stats 800460.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635300 bytes_read=2274990 bytes_retransmit=9 bytes_invalid=0 send_seq=204219 receive_seq=204219 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992919 heater_bed: target=0 temp=52.4 pwm=0.000  sysload=0.58 cputime=307.877 memavail=7283432 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.5 pwm=0.000
Stats 800461.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635306 bytes_read=2275096 bytes_retransmit=9 bytes_invalid=0 send_seq=204220 receive_seq=204220 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992938 heater_bed: target=0 temp=52.3 pwm=0.000  sysload=0.54 cputime=307.900 memavail=7288172 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.4 pwm=0.000
Stats 800462.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635312 bytes_read=2275217 bytes_retransmit=9 bytes_invalid=0 send_seq=204221 receive_seq=204221 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992927 heater_bed: target=0 temp=52.3 pwm=0.000  sysload=0.54 cputime=307.927 memavail=7288172 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.3 pwm=0.000
Stats 800463.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635318 bytes_read=2275338 bytes_retransmit=9 bytes_invalid=0 send_seq=204222 receive_seq=204222 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992918 heater_bed: target=0 temp=52.3 pwm=0.000  sysload=0.54 cputime=307.957 memavail=7288172 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.2 pwm=0.000
Stats 800464.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635324 bytes_read=2275444 bytes_retransmit=9 bytes_invalid=0 send_seq=204223 receive_seq=204223 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992910 heater_bed: target=0 temp=52.2 pwm=0.000  sysload=0.54 cputime=307.979 memavail=7288172 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.1 pwm=0.000
Stats 800465.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635330 bytes_read=2275579 bytes_retransmit=9 bytes_invalid=0 send_seq=204224 receive_seq=204224 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992903 heater_bed: target=0 temp=52.2 pwm=0.000  sysload=0.54 cputime=308.002 memavail=7287948 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.0 pwm=0.000
Stats 800466.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635336 bytes_read=2275698 bytes_retransmit=9 bytes_invalid=0 send_seq=204225 receive_seq=204225 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992930 heater_bed: target=0 temp=52.2 pwm=0.000  sysload=0.49 cputime=308.026 memavail=7287948 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.9 pwm=0.000
Stats 800467.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635342 bytes_read=2275798 bytes_retransmit=9 bytes_invalid=0 send_seq=204226 receive_seq=204226 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=0 temp=52.2 pwm=0.000  sysload=0.49 cputime=308.044 memavail=7287948 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.9 pwm=0.000
Stats 800468.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635354 bytes_read=2275926 bytes_retransmit=9 bytes_invalid=0 send_seq=204228 receive_seq=204228 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992908 heater_bed: target=0 temp=52.1 pwm=0.000  sysload=0.49 cputime=308.061 memavail=7287948 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.8 pwm=0.000
Stats 800469.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635360 bytes_read=2276047 bytes_retransmit=9 bytes_invalid=0 send_seq=204229 receive_seq=204229 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992951 heater_bed: target=0 temp=52.1 pwm=0.000  sysload=0.49 cputime=308.081 memavail=7287948 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.7 pwm=0.000
Stats 800470.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635366 bytes_read=2276167 bytes_retransmit=9 bytes_invalid=0 send_seq=204230 receive_seq=204230 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992942 heater_bed: target=0 temp=52.1 pwm=0.000  sysload=0.49 cputime=308.103 memavail=7287700 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000
Stats 800471.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635372 bytes_read=2276288 bytes_retransmit=9 bytes_invalid=0 send_seq=204231 receive_seq=204231 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992931 heater_bed: target=0 temp=52.1 pwm=0.000  sysload=0.53 cputime=308.124 memavail=7287700 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.5 pwm=0.000
Stats 800472.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635378 bytes_read=2276409 bytes_retransmit=9 bytes_invalid=0 send_seq=204232 receive_seq=204232 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992926 heater_bed: target=0 temp=52.0 pwm=0.000  sysload=0.53 cputime=308.141 memavail=7287700 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.5 pwm=0.000
Stats 800473.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635384 bytes_read=2276515 bytes_retransmit=9 bytes_invalid=0 send_seq=204233 receive_seq=204233 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992986 heater_bed: target=0 temp=52.0 pwm=0.000  sysload=0.53 cputime=308.164 memavail=7287700 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.4 pwm=0.000
Stats 800474.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635390 bytes_read=2276636 bytes_retransmit=9 bytes_invalid=0 send_seq=204234 receive_seq=204234 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992975 heater_bed: target=0 temp=51.9 pwm=0.000  sysload=0.53 cputime=308.192 memavail=7287700 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.3 pwm=0.000
Stats 800475.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635396 bytes_read=2276771 bytes_retransmit=9 bytes_invalid=0 send_seq=204235 receive_seq=204235 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992964 heater_bed: target=0 temp=51.9 pwm=0.000  sysload=0.53 cputime=308.214 memavail=7287700 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.2 pwm=0.000
Stats 800476.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635402 bytes_read=2276877 bytes_retransmit=9 bytes_invalid=0 send_seq=204236 receive_seq=204236 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992955 heater_bed: target=0 temp=51.9 pwm=0.000  sysload=0.57 cputime=308.235 memavail=7287700 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.1 pwm=0.000
Stats 800477.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635408 bytes_read=2276998 bytes_retransmit=9 bytes_invalid=0 send_seq=204237 receive_seq=204237 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992948 heater_bed: target=0 temp=51.9 pwm=0.000  sysload=0.57 cputime=308.256 memavail=7287252 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.1 pwm=0.000
Stats 800478.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635414 bytes_read=2277119 bytes_retransmit=9 bytes_invalid=0 send_seq=204238 receive_seq=204238 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992942 heater_bed: target=0 temp=51.9 pwm=0.000  sysload=0.57 cputime=308.284 memavail=7287252 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.0 pwm=0.000
Stats 800479.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635420 bytes_read=2277225 bytes_retransmit=9 bytes_invalid=0 send_seq=204239 receive_seq=204239 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992931 heater_bed: target=0 temp=51.8 pwm=0.000  sysload=0.57 cputime=308.309 memavail=7287252 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.9 pwm=0.000
Stats 800480.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635426 bytes_read=2277360 bytes_retransmit=9 bytes_invalid=0 send_seq=204240 receive_seq=204240 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992922 heater_bed: target=0 temp=51.8 pwm=0.000  sysload=0.57 cputime=308.334 memavail=7286496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.8 pwm=0.000
Stats 800481.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635432 bytes_read=2277481 bytes_retransmit=9 bytes_invalid=0 send_seq=204241 receive_seq=204241 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=0 temp=51.8 pwm=0.000  sysload=0.69 cputime=308.355 memavail=7286496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000
Stats 800482.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635438 bytes_read=2277587 bytes_retransmit=9 bytes_invalid=0 send_seq=204242 receive_seq=204242 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992906 heater_bed: target=0 temp=51.7 pwm=0.000  sysload=0.69 cputime=308.373 memavail=7286496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.6 pwm=0.000
Stats 800483.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635444 bytes_read=2277708 bytes_retransmit=9 bytes_invalid=0 send_seq=204243 receive_seq=204243 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992941 heater_bed: target=0 temp=51.7 pwm=0.000  sysload=0.69 cputime=308.397 memavail=7286496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000
Stats 800484.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635450 bytes_read=2277829 bytes_retransmit=9 bytes_invalid=0 send_seq=204244 receive_seq=204244 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992931 heater_bed: target=0 temp=51.7 pwm=0.000  sysload=0.69 cputime=308.419 memavail=7286496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000
Stats 800485.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635456 bytes_read=2277949 bytes_retransmit=9 bytes_invalid=0 send_seq=204245 receive_seq=204245 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=0 temp=51.7 pwm=0.000  sysload=0.69 cputime=308.441 memavail=7286496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.4 pwm=0.000
Stats 800486.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635462 bytes_read=2278070 bytes_retransmit=9 bytes_invalid=0 send_seq=204246 receive_seq=204246 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992912 heater_bed: target=0 temp=51.7 pwm=0.000  sysload=0.71 cputime=308.465 memavail=7286496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.3 pwm=0.000
Stats 800487.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635468 bytes_read=2278191 bytes_retransmit=9 bytes_invalid=0 send_seq=204247 receive_seq=204247 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992906 heater_bed: target=0 temp=51.7 pwm=0.000  sysload=0.71 cputime=308.485 memavail=7286496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.2 pwm=0.000
Stats 800488.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635474 bytes_read=2278297 bytes_retransmit=9 bytes_invalid=0 send_seq=204248 receive_seq=204248 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992899 heater_bed: target=0 temp=51.6 pwm=0.000  sysload=0.71 cputime=308.510 memavail=7286496 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000
Stats 800489.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635480 bytes_read=2278418 bytes_retransmit=9 bytes_invalid=0 send_seq=204249 receive_seq=204249 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992901 heater_bed: target=0 temp=51.6 pwm=0.000  sysload=0.71 cputime=308.536 memavail=7286504 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000
Stats 800490.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635486 bytes_read=2278553 bytes_retransmit=9 bytes_invalid=0 send_seq=204250 receive_seq=204250 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992897 heater_bed: target=0 temp=51.5 pwm=0.000  sysload=0.71 cputime=308.557 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.0 pwm=0.000
Stats 800491.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635492 bytes_read=2278659 bytes_retransmit=9 bytes_invalid=0 send_seq=204251 receive_seq=204251 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992891 heater_bed: target=0 temp=51.5 pwm=0.000  sysload=0.74 cputime=308.577 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.9 pwm=0.000
Stats 800492.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635498 bytes_read=2278780 bytes_retransmit=9 bytes_invalid=0 send_seq=204252 receive_seq=204252 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992922 heater_bed: target=0 temp=51.5 pwm=0.000  sysload=0.74 cputime=308.602 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000
Stats 800493.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635504 bytes_read=2278901 bytes_retransmit=9 bytes_invalid=0 send_seq=204253 receive_seq=204253 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=0 temp=51.5 pwm=0.000  sysload=0.74 cputime=308.625 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000
Stats 800494.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635510 bytes_read=2279007 bytes_retransmit=9 bytes_invalid=0 send_seq=204254 receive_seq=204254 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992906 heater_bed: target=0 temp=51.5 pwm=0.000  sysload=0.74 cputime=308.646 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000
Stats 800495.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635516 bytes_read=2279157 bytes_retransmit=9 bytes_invalid=0 send_seq=204255 receive_seq=204255 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992900 heater_bed: target=0 temp=51.4 pwm=0.000  sysload=0.74 cputime=308.669 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.6 pwm=0.000
Stats 800496.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635522 bytes_read=2279263 bytes_retransmit=9 bytes_invalid=0 send_seq=204256 receive_seq=204256 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992929 heater_bed: target=0 temp=51.4 pwm=0.000  sysload=0.76 cputime=308.688 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000
Stats 800497.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635528 bytes_read=2279369 bytes_retransmit=9 bytes_invalid=0 send_seq=204257 receive_seq=204257 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992926 heater_bed: target=0 temp=51.4 pwm=0.000  sysload=0.76 cputime=308.711 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000
Stats 800498.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635534 bytes_read=2279505 bytes_retransmit=9 bytes_invalid=0 send_seq=204258 receive_seq=204258 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992918 heater_bed: target=0 temp=51.3 pwm=0.000  sysload=0.76 cputime=308.734 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.4 pwm=0.000
Stats 800499.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635540 bytes_read=2279611 bytes_retransmit=9 bytes_invalid=0 send_seq=204259 receive_seq=204259 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992910 heater_bed: target=0 temp=51.3 pwm=0.000  sysload=0.76 cputime=308.750 memavail=7285528 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.3 pwm=0.000
Stats 800500.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635546 bytes_read=2279731 bytes_retransmit=9 bytes_invalid=0 send_seq=204260 receive_seq=204260 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992904 heater_bed: target=0 temp=51.3 pwm=0.000  sysload=0.76 cputime=308.768 memavail=7286032 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000
Stats 800501.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635552 bytes_read=2279867 bytes_retransmit=9 bytes_invalid=0 send_seq=204261 receive_seq=204261 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992931 heater_bed: target=0 temp=51.3 pwm=0.000  sysload=0.78 cputime=308.788 memavail=7286032 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000
Stats 800502.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635558 bytes_read=2279969 bytes_retransmit=9 bytes_invalid=0 send_seq=204262 receive_seq=204262 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992922 heater_bed: target=0 temp=51.2 pwm=0.000  sysload=0.78 cputime=308.811 memavail=7286032 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000
Stats 800503.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635564 bytes_read=2280068 bytes_retransmit=9 bytes_invalid=0 send_seq=204263 receive_seq=204263 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=0 temp=51.2 pwm=0.000  sysload=0.78 cputime=308.830 memavail=7286032 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.0 pwm=0.000
Stats 800504.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635570 bytes_read=2280197 bytes_retransmit=9 bytes_invalid=0 send_seq=204264 receive_seq=204264 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992909 heater_bed: target=0 temp=51.2 pwm=0.000  sysload=0.78 cputime=308.851 memavail=7286032 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000
Stats 800505.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635576 bytes_read=2280303 bytes_retransmit=9 bytes_invalid=0 send_seq=204265 receive_seq=204265 retransmit_seq=17 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992954 heater_bed: target=0 temp=51.2 pwm=0.000  sysload=0.78 cputime=308.879 memavail=7286032 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000
Stats 800506.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635582 bytes_read=2280423 bytes_retransmit=9 bytes_invalid=0 send_seq=204266 receive_seq=204266 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992944 heater_bed: target=0 temp=51.2 pwm=0.000  sysload=0.87 cputime=308.908 memavail=7285808 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000
Stats 800507.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635588 bytes_read=2280559 bytes_retransmit=9 bytes_invalid=0 send_seq=204267 receive_seq=204267 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992933 heater_bed: target=0 temp=51.1 pwm=0.000  sysload=0.87 cputime=308.932 memavail=7285812 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.7 pwm=0.000
Stats 800508.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635594 bytes_read=2280665 bytes_retransmit=9 bytes_invalid=0 send_seq=204268 receive_seq=204268 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992931 heater_bed: target=0 temp=51.1 pwm=0.000  sysload=0.87 cputime=308.954 memavail=7285812 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000
Stats 800509.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635600 bytes_read=2280771 bytes_retransmit=9 bytes_invalid=0 send_seq=204269 receive_seq=204269 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992923 heater_bed: target=0 temp=51.1 pwm=0.000  sysload=0.87 cputime=308.980 memavail=7285812 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000
Stats 800510.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635606 bytes_read=2280907 bytes_retransmit=9 bytes_invalid=0 send_seq=204270 receive_seq=204270 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992914 heater_bed: target=0 temp=51.1 pwm=0.000  sysload=0.87 cputime=309.005 memavail=7285816 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000
Stats 800511.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635612 bytes_read=2281027 bytes_retransmit=9 bytes_invalid=0 send_seq=204271 receive_seq=204271 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992905 heater_bed: target=0 temp=51.1 pwm=0.000  sysload=0.80 cputime=309.027 memavail=7285816 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.4 pwm=0.000
Stats 800512.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635618 bytes_read=2281133 bytes_retransmit=9 bytes_invalid=0 send_seq=204272 receive_seq=204272 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992904 heater_bed: target=0 temp=51.0 pwm=0.000  sysload=0.80 cputime=309.044 memavail=7285816 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000
Stats 800513.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635624 bytes_read=2281269 bytes_retransmit=9 bytes_invalid=0 send_seq=204273 receive_seq=204273 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992899 heater_bed: target=0 temp=51.0 pwm=0.000  sysload=0.80 cputime=309.066 memavail=7285816 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000
Stats 800514.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635630 bytes_read=2281375 bytes_retransmit=9 bytes_invalid=0 send_seq=204274 receive_seq=204274 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992951 heater_bed: target=0 temp=51.0 pwm=0.000  sysload=0.80 cputime=309.091 memavail=7285816 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000
Stats 800515.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635636 bytes_read=2281481 bytes_retransmit=9 bytes_invalid=0 send_seq=204275 receive_seq=204275 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992941 heater_bed: target=0 temp=50.9 pwm=0.000  sysload=0.80 cputime=309.111 memavail=7285816 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000
Stats 800516.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635642 bytes_read=2281631 bytes_retransmit=9 bytes_invalid=0 send_seq=204276 receive_seq=204276 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992929 heater_bed: target=0 temp=50.9 pwm=0.000  sysload=0.74 cputime=309.130 memavail=7285816 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000
Stats 800517.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635648 bytes_read=2281737 bytes_retransmit=9 bytes_invalid=0 send_seq=204277 receive_seq=204277 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992920 heater_bed: target=0 temp=50.9 pwm=0.000  sysload=0.74 cputime=309.146 memavail=7285816 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000
Stats 800518.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635654 bytes_read=2281858 bytes_retransmit=9 bytes_invalid=0 send_seq=204278 receive_seq=204278 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992915 heater_bed: target=0 temp=50.9 pwm=0.000  sysload=0.74 cputime=309.170 memavail=7285816 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000
Stats 800519.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635660 bytes_read=2281979 bytes_retransmit=9 bytes_invalid=0 send_seq=204279 receive_seq=204279 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992907 heater_bed: target=0 temp=50.8 pwm=0.000  sysload=0.74 cputime=309.193 memavail=7285816 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000
Stats 800520.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635666 bytes_read=2282085 bytes_retransmit=9 bytes_invalid=0 send_seq=204280 receive_seq=204280 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992899 heater_bed: target=0 temp=50.8 pwm=0.000  sysload=0.74 cputime=309.216 memavail=7285504 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000
Stats 800521.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635672 bytes_read=2282220 bytes_retransmit=9 bytes_invalid=0 send_seq=204281 receive_seq=204281 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992903 heater_bed: target=0 temp=50.8 pwm=0.000  sysload=0.76 cputime=309.235 memavail=7285568 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.7 pwm=0.000
Stats 800522.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=10635678 bytes_read=2282341 bytes_retransmit=9 bytes_invalid=0 send_seq=204282 receive_seq=204282 retransmit_seq=17 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992899 heater_bed: target=0 temp=50.7 pwm=0.000  sysload=0.76 cputime=309.252 memavail=7285824 print_time=5447.233 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-311-g9e765dae'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sat Nov 18 20:16:11 2023 (1700367371.9 801014.9)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
webhooks client 547880750000: New connection
webhooks client 547880750000: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
Loaded MCU 'mcu' 105 commands (v0.11.0-105-g1e7057e9 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0=P0.28,P0.27 BUS_PINS_i2c1=P0.1,P0.0 BUS_PINS_i2c1a=P0.20,P0.19 BUS_PINS_i2c2=P0.11,P0.10 BUS_PINS_ssp0=P0.17,P0.18,P0.15 BUS_PINS_ssp1=P0.8,P0.9,P0.7 CLOCK_FREQ=120000000 MCU=lpc1769 PWM_MAX=255 RESERVE_PINS_USB=P0.30,P0.29,P2.9 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (0.0, 10.0)     | (27.0, 5.0)
  1   | (35.5, 10.0)    | (62.5, 5.0)
  2   | (71.0, 10.0)    | (98.0, 5.0)
  3   | (106.5, 10.0)   | (133.5, 5.0)
  4   | (142.0, 10.0)   | (169.0, 5.0)
  5   | (177.5, 10.0)   | (204.5, 5.0)
  6   | (213.0, 10.0)   | (240.0, 5.0)
  7   | (213.0, 58.8)   | (240.0, 53.8)
  8   | (177.5, 58.8)   | (204.5, 53.8)
  9   | (142.0, 58.8)   | (169.0, 53.8)
  10  | (106.5, 58.8)   | (133.5, 53.8)
  11  | (71.0, 58.8)    | (98.0, 53.8)
  12  | (35.5, 58.8)    | (62.5, 53.8)
  13  | (0.0, 58.8)     | (27.0, 53.8)
  14  | (0.0, 107.5)    | (27.0, 102.5)
  15  | (35.5, 107.5)   | (62.5, 102.5)
  16  | (71.0, 107.5)   | (98.0, 102.5)
  17  | (106.5, 107.5)  | (133.5, 102.5)
  18  | (142.0, 107.5)  | (169.0, 102.5)
  19  | (177.5, 107.5)  | (204.5, 102.5)
  20  | (213.0, 107.5)  | (240.0, 102.5)
  21  | (213.0, 156.2)  | (240.0, 151.2)
  22  | (177.5, 156.2)  | (204.5, 151.2)
  23  | (142.0, 156.2)  | (169.0, 151.2)
  24  | (106.5, 156.2)  | (133.5, 151.2)
  25  | (71.0, 156.2)   | (98.0, 151.2)
  26  | (35.5, 156.2)   | (62.5, 151.2)
  27  | (0.0, 156.2)    | (27.0, 151.2)
  28  | (0.0, 205.0)    | (27.0, 200.0)
  29  | (35.5, 205.0)   | (62.5, 200.0)
  30  | (71.0, 205.0)   | (98.0, 200.0)
  31  | (106.5, 205.0)  | (133.5, 200.0)
  32  | (142.0, 205.0)  | (169.0, 200.0)
  33  | (177.5, 205.0)  | (204.5, 200.0)
  34  | (213.0, 205.0)  | (240.0, 200.0)
Starting heater checks for extruder
Starting heater checks for heater_bed
Stats 801023.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2769 bytes_read=5911 bytes_retransmit=0 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993890 heater_bed: target=0 temp=0.0 pwm=0.000  sysload=0.20 cputime=1.906 memavail=7285472 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 547880750000
webhooks: registering remote method 'reboot_machine' for connection id: 547880750000
webhooks: registering remote method 'pause_job_queue' for connection id: 547880750000
webhooks: registering remote method 'start_job_queue' for connection id: 547880750000
webhooks: registering remote method 'timelapse_newframe' for connection id: 547880750000
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 547880750000
webhooks: registering remote method 'timelapse_render' for connection id: 547880750000
webhooks: registering remote method 'publish_mqtt_topic' for connection id: 547880750000
webhooks: registering remote method 'notify' for connection id: 547880750000
webhooks: registering remote method 'set_device_power' for connection id: 547880750000
Stats 801024.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2783 bytes_read=6032 bytes_retransmit=0 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993560 heater_bed: target=0 temp=40.0 pwm=0.000  sysload=0.20 cputime=1.990 memavail=7285224 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.2 pwm=0.000
Stats 801025.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2789 bytes_read=6138 bytes_retransmit=0 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993217 heater_bed: target=0 temp=39.9 pwm=0.000  sysload=0.20 cputime=2.019 memavail=7284776 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.1 pwm=0.000
Stats 801026.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2795 bytes_read=6259 bytes_retransmit=0 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119999068 heater_bed: target=0 temp=39.8 pwm=0.000  sysload=0.20 cputime=2.043 memavail=7284776 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.1 pwm=0.000
Stats 801027.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2801 bytes_read=6395 bytes_retransmit=0 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119996250 heater_bed: target=0 temp=39.8 pwm=0.000  sysload=0.18 cputime=2.063 memavail=7284776 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.1 pwm=0.000
Stats 801028.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2807 bytes_read=6501 bytes_retransmit=0 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994864 heater_bed: target=0 temp=39.7 pwm=0.000  sysload=0.18 cputime=2.084 memavail=7284776 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.1 pwm=0.000
Stats 801029.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2813 bytes_read=6622 bytes_retransmit=0 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994200 heater_bed: target=0 temp=39.6 pwm=0.000  sysload=0.18 cputime=2.104 memavail=7288008 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000
Stats 801030.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2819 bytes_read=6743 bytes_retransmit=0 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993904 heater_bed: target=0 temp=39.5 pwm=0.000  sysload=0.18 cputime=2.124 memavail=7287784 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.0 pwm=0.000
Stats 801031.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=2825 bytes_read=6849 bytes_retransmit=0 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993647 heater_bed: target=0 temp=39.3 pwm=0.000  sysload=0.18 cputime=2.147 memavail=7287560 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.9 pwm=0.000
Stats 801032.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2831 bytes_read=6984 bytes_retransmit=0 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993481 heater_bed: target=0 temp=39.2 pwm=0.000  sysload=0.16 cputime=2.170 memavail=7289888 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.9 pwm=0.000
Stats 801033.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2837 bytes_read=7105 bytes_retransmit=0 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993361 heater_bed: target=0 temp=39.2 pwm=0.000  sysload=0.16 cputime=2.190 memavail=7289664 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.9 pwm=0.000
Stats 801034.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2843 bytes_read=7211 bytes_retransmit=0 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993344 heater_bed: target=0 temp=39.1 pwm=0.000  sysload=0.16 cputime=2.208 memavail=7289664 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.9 pwm=0.000
Stats 801035.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2849 bytes_read=7332 bytes_retransmit=0 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994113 heater_bed: target=0 temp=39.0 pwm=0.000  sysload=0.16 cputime=2.227 memavail=7289188 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000
Stats 801036.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2855 bytes_read=7453 bytes_retransmit=0 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993898 heater_bed: target=0 temp=39.0 pwm=0.000  sysload=0.16 cputime=2.251 memavail=7288964 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.9 pwm=0.000
Stats 801037.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2861 bytes_read=7573 bytes_retransmit=0 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993726 heater_bed: target=0 temp=38.9 pwm=0.000  sysload=0.15 cputime=2.268 memavail=7288740 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000
Stats 801038.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2867 bytes_read=7694 bytes_retransmit=0 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993620 heater_bed: target=0 temp=38.8 pwm=0.000  sysload=0.15 cputime=2.285 memavail=7292680 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.7 pwm=0.000
Stats 801039.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2873 bytes_read=7815 bytes_retransmit=0 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993740 heater_bed: target=0 temp=38.8 pwm=0.000  sysload=0.15 cputime=2.304 memavail=7292188 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.7 pwm=0.000
Stats 801040.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2879 bytes_read=7921 bytes_retransmit=0 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993610 heater_bed: target=0 temp=38.8 pwm=0.000  sysload=0.15 cputime=2.323 memavail=7291964 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000
Stats 801041.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2885 bytes_read=8042 bytes_retransmit=0 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993514 heater_bed: target=0 temp=38.7 pwm=0.000  sysload=0.15 cputime=2.343 memavail=7291964 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.7 pwm=0.000
Stats 801042.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2891 bytes_read=8177 bytes_retransmit=0 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993424 heater_bed: target=0 temp=38.7 pwm=0.000  sysload=0.14 cputime=2.362 memavail=7290736 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000
Stats 801043.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2897 bytes_read=8283 bytes_retransmit=0 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993372 heater_bed: target=0 temp=38.6 pwm=0.000  sysload=0.14 cputime=2.377 memavail=7288748 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000
Stats 801044.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2903 bytes_read=8404 bytes_retransmit=0 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993488 heater_bed: target=0 temp=38.4 pwm=0.000  sysload=0.14 cputime=2.401 memavail=7288008 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000
Stats 801045.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2909 bytes_read=8525 bytes_retransmit=0 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993444 heater_bed: target=0 temp=38.5 pwm=0.000  sysload=0.14 cputime=2.432 memavail=7287448 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.5 pwm=0.000
Stats 801046.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2915 bytes_read=8631 bytes_retransmit=0 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993369 heater_bed: target=0 temp=38.5 pwm=0.000  sysload=0.14 cputime=2.459 memavail=7286972 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.5 pwm=0.000
Stats 801047.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2921 bytes_read=8766 bytes_retransmit=0 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993301 heater_bed: target=0 temp=38.5 pwm=0.000  sysload=0.13 cputime=2.479 memavail=7286972 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.5 pwm=0.000
Stats 801048.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2927 bytes_read=8887 bytes_retransmit=0 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993248 heater_bed: target=0 temp=38.4 pwm=0.000  sysload=0.13 cputime=2.509 memavail=7290752 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.4 pwm=0.000
Stats 801049.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2933 bytes_read=8993 bytes_retransmit=0 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993486 heater_bed: target=0 temp=38.4 pwm=0.000  sysload=0.13 cputime=2.540 memavail=7293440 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.4 pwm=0.000
Stats 801050.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2939 bytes_read=9114 bytes_retransmit=0 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993454 heater_bed: target=0 temp=38.4 pwm=0.000  sysload=0.13 cputime=2.566 memavail=7293440 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.3 pwm=0.000
Stats 801051.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2945 bytes_read=9235 bytes_retransmit=0 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993406 heater_bed: target=0 temp=38.4 pwm=0.000  sysload=0.13 cputime=2.591 memavail=7292500 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.3 pwm=0.000
Stats 801052.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2951 bytes_read=9349 bytes_retransmit=0 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993370 heater_bed: target=0 temp=38.4 pwm=0.000  sysload=0.12 cputime=2.613 memavail=7291764 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.3 pwm=0.000
Stats 801053.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2957 bytes_read=9462 bytes_retransmit=0 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993599 heater_bed: target=0 temp=38.3 pwm=0.000  sysload=0.12 cputime=2.637 memavail=7291540 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.3 pwm=0.000
Stats 801054.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2963 bytes_read=9581 bytes_retransmit=0 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993536 heater_bed: target=0 temp=38.3 pwm=0.000  sysload=0.12 cputime=2.663 memavail=7291316 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.3 pwm=0.000
Stats 801055.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2969 bytes_read=9687 bytes_retransmit=0 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993486 heater_bed: target=0 temp=38.3 pwm=0.000  sysload=0.12 cputime=2.690 memavail=7291316 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.3 pwm=0.000
Stats 801056.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2975 bytes_read=9808 bytes_retransmit=0 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993448 heater_bed: target=0 temp=38.2 pwm=0.000  sysload=0.12 cputime=2.712 memavail=7290604 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.2 pwm=0.000
Stats 801057.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2987 bytes_read=9959 bytes_retransmit=0 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993447 heater_bed: target=0 temp=38.2 pwm=0.000  sysload=0.11 cputime=2.735 memavail=7290604 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.2 pwm=0.000
Stats 801058.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2993 bytes_read=10065 bytes_retransmit=0 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993434 heater_bed: target=0 temp=38.2 pwm=0.000  sysload=0.11 cputime=2.754 memavail=7290604 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.2 pwm=0.000
Stats 801059.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2999 bytes_read=10186 bytes_retransmit=0 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993403 heater_bed: target=0 temp=38.2 pwm=0.000  sysload=0.11 cputime=2.779 memavail=7290604 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.2 pwm=0.000
Stats 801060.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3005 bytes_read=10307 bytes_retransmit=0 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993370 heater_bed: target=0 temp=38.1 pwm=0.000  sysload=0.11 cputime=2.804 memavail=7290604 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000
Stats 801061.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3011 bytes_read=10413 bytes_retransmit=0 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993339 heater_bed: target=0 temp=38.2 pwm=0.000  sysload=0.11 cputime=2.822 memavail=7290384 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000
Stats 801062.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3017 bytes_read=10548 bytes_retransmit=0 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993312 heater_bed: target=0 temp=38.2 pwm=0.000  sysload=0.10 cputime=2.849 memavail=7289628 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000
Stats 801063.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3023 bytes_read=10669 bytes_retransmit=0 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993287 heater_bed: target=0 temp=38.1 pwm=0.000  sysload=0.10 cputime=2.872 memavail=7289628 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.0 pwm=0.000
Stats 801064.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3029 bytes_read=10775 bytes_retransmit=0 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993264 heater_bed: target=0 temp=38.1 pwm=0.000  sysload=0.10 cputime=2.906 memavail=7289076 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.1 pwm=0.000
Stats 801065.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3035 bytes_read=10911 bytes_retransmit=0 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993249 heater_bed: target=0 temp=38.1 pwm=0.000  sysload=0.10 cputime=2.928 memavail=7287892 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.0 pwm=0.000
Stats 801066.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3041 bytes_read=11017 bytes_retransmit=0 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993222 heater_bed: target=0 temp=38.1 pwm=0.000  sysload=0.10 cputime=2.954 memavail=7287672 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000
Stats 801067.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3047 bytes_read=11137 bytes_retransmit=0 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993197 heater_bed: target=0 temp=38.1 pwm=0.000  sysload=0.09 cputime=2.977 memavail=7287672 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.0 pwm=0.000
Stats 801068.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3053 bytes_read=11273 bytes_retransmit=0 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993176 heater_bed: target=0 temp=38.1 pwm=0.000  sysload=0.09 cputime=2.998 memavail=7287448 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000
Stats 801069.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3059 bytes_read=11379 bytes_retransmit=0 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993169 heater_bed: target=0 temp=38.1 pwm=0.000  sysload=0.09 cputime=3.017 memavail=7287448 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000
Stats 801070.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3065 bytes_read=11485 bytes_retransmit=0 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993158 heater_bed: target=0 temp=38.0 pwm=0.000  sysload=0.09 cputime=3.035 memavail=7287224 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000
Stats 801071.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3071 bytes_read=11621 bytes_retransmit=0 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993149 heater_bed: target=0 temp=38.1 pwm=0.000  sysload=0.09 cputime=3.053 memavail=7287000 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.9 pwm=0.000
Stats 801072.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3077 bytes_read=11741 bytes_retransmit=0 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993141 heater_bed: target=0 temp=38.0 pwm=0.000  sysload=0.16 cputime=3.072 memavail=7289028 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.8 pwm=0.000
Stats 801073.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3083 bytes_read=11847 bytes_retransmit=0 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993138 heater_bed: target=0 temp=38.1 pwm=0.000  sysload=0.16 cputime=3.094 memavail=7289056 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.8 pwm=0.000
Stats 801074.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3089 bytes_read=11983 bytes_retransmit=0 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993219 heater_bed: target=0 temp=38.0 pwm=0.000  sysload=0.16 cputime=3.119 memavail=7288832 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.8 pwm=0.000
Stats 801075.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3095 bytes_read=12089 bytes_retransmit=0 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993207 heater_bed: target=0 temp=38.0 pwm=0.000  sysload=0.16 cputime=3.137 memavail=7288608 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.8 pwm=0.000
Stats 801076.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3101 bytes_read=12195 bytes_retransmit=0 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993198 heater_bed: target=0 temp=38.0 pwm=0.000  sysload=0.16 cputime=3.153 memavail=7288136 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.7 pwm=0.000
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:zv shaper_freq_y:51.000 damping_ratio_y:0.100000
Unknown command:"ACCELEROMETER_QUERY"
Unknown command:"MEASURE_AXES_NOISE"
Stats 801409.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=5129 bytes_read=51698 bytes_retransmit=0 bytes_invalid=0 send_seq=624 receive_seq=624 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993211 heater_bed: target=0 temp=32.8 pwm=0.000  sysload=0.15 cputime=10.220 memavail=7291576 print_time=393.475 buffer_time=0.272 print_stall=0 extruder: target=0 temp=30.3 pwm=0.000
webhooks client 547880750000: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:22:47 2023 (1700367767.7 801410.7)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[mcu adxl]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00

[adxl345]
cs_pin = adxl:gpio1
spi_bus = spi0a
axes_map = x,z,y

[resonance_tester]
accel_chip = adxl345
probe_points = 
	150,150, 20

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547888421856: New connection
webhooks client 547888421856: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
mcu 'mcu': got {'oid': 25, 'next_clock': 281359744, 'value': 30913, '#name': 'analog_in_state', '#sent_time': 801411.868523858, '#receive_time': 801411.882611728}
mcu 'mcu': got {'oid': 17, 'next_clock': 307759744, 'value': 30728, '#name': 'analog_in_state', '#sent_time': 801412.097474302, '#receive_time': 801412.101485247}
mcu 'mcu': got {'oid': 25, 'next_clock': 317359744, 'value': 30912, '#name': 'analog_in_state', '#sent_time': 801412.148475802, '#receive_time': 801412.181537395}
Loaded MCU 'mcu' 105 commands (v0.11.0-105-g1e7057e9 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0=P0.28,P0.27 BUS_PINS_i2c1=P0.1,P0.0 BUS_PINS_i2c1a=P0.20,P0.19 BUS_PINS_i2c2=P0.11,P0.10 BUS_PINS_ssp0=P0.17,P0.18,P0.15 BUS_PINS_ssp1=P0.8,P0.9,P0.7 CLOCK_FREQ=120000000 MCU=lpc1769 PWM_MAX=255 RESERVE_PINS_USB=P0.30,P0.29,P2.9 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'adxl': Starting serial connect
mcu 'mcu': got {'oid': 17, 'next_clock': 343759744, 'value': 30727, '#name': 'analog_in_state', '#sent_time': 801412.321292321, '#receive_time': 801412.402144617}
mcu 'mcu': got {'oid': 25, 'next_clock': 353359744, 'value': 30907, '#name': 'analog_in_state', '#sent_time': 801412.321292321, '#receive_time': 801412.481564987}
mcu 'mcu': got {'oid': 17, 'next_clock': 379759744, 'value': 30726, '#name': 'analog_in_state', '#sent_time': 801412.321292321, '#receive_time': 801412.701553654}
mcu 'mcu': got {'oid': 25, 'next_clock': 389359744, 'value': 30910, '#name': 'analog_in_state', '#sent_time': 801412.321292321, '#receive_time': 801412.781537931}
Loaded MCU 'adxl' 105 commands (v0.11.0-159-gfec7ddd8 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'adxl' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'mcu': got {'oid': 17, 'next_clock': 415759744, 'value': 30731, '#name': 'analog_in_state', '#sent_time': 801412.321292321, '#receive_time': 801413.003966709}
Configured MCU 'mcu' (1024 moves)
Sending MCU 'adxl' printer configuration...
Configured MCU 'adxl' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (0.0, 10.0)     | (27.0, 5.0)
  1   | (35.5, 10.0)    | (62.5, 5.0)
  2   | (71.0, 10.0)    | (98.0, 5.0)
  3   | (106.5, 10.0)   | (133.5, 5.0)
  4   | (142.0, 10.0)   | (169.0, 5.0)
  5   | (177.5, 10.0)   | (204.5, 5.0)
  6   | (213.0, 10.0)   | (240.0, 5.0)
  7   | (213.0, 58.8)   | (240.0, 53.8)
  8   | (177.5, 58.8)   | (204.5, 53.8)
  9   | (142.0, 58.8)   | (169.0, 53.8)
  10  | (106.5, 58.8)   | (133.5, 53.8)
  11  | (71.0, 58.8)    | (98.0, 53.8)
  12  | (35.5, 58.8)    | (62.5, 53.8)
  13  | (0.0, 58.8)     | (27.0, 53.8)
  14  | (0.0, 107.5)    | (27.0, 102.5)
  15  | (35.5, 107.5)   | (62.5, 102.5)
  16  | (71.0, 107.5)   | (98.0, 102.5)
  17  | (106.5, 107.5)  | (133.5, 102.5)
  18  | (142.0, 107.5)  | (169.0, 102.5)
  19  | (177.5, 107.5)  | (204.5, 102.5)
  20  | (213.0, 107.5)  | (240.0, 102.5)
  21  | (213.0, 156.2)  | (240.0, 151.2)
  22  | (177.5, 156.2)  | (204.5, 151.2)
  23  | (142.0, 156.2)  | (169.0, 151.2)
  24  | (106.5, 156.2)  | (133.5, 151.2)
  25  | (71.0, 156.2)   | (98.0, 151.2)
  26  | (35.5, 156.2)   | (62.5, 151.2)
  27  | (0.0, 156.2)    | (27.0, 151.2)
  28  | (0.0, 205.0)    | (27.0, 200.0)
  29  | (35.5, 205.0)   | (62.5, 200.0)
  30  | (71.0, 205.0)   | (98.0, 200.0)
  31  | (106.5, 205.0)  | (133.5, 200.0)
  32  | (142.0, 205.0)  | (169.0, 200.0)
  33  | (177.5, 205.0)  | (204.5, 200.0)
  34  | (213.0, 205.0)  | (240.0, 200.0)
Starting heater checks for extruder
Starting heater checks for heater_bed
webhooks: registering remote method 'shutdown_machine' for connection id: 547888421856
webhooks: registering remote method 'reboot_machine' for connection id: 547888421856
webhooks: registering remote method 'pause_job_queue' for connection id: 547888421856
webhooks: registering remote method 'start_job_queue' for connection id: 547888421856
webhooks: registering remote method 'timelapse_newframe' for connection id: 547888421856
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 547888421856
webhooks: registering remote method 'timelapse_render' for connection id: 547888421856
webhooks: registering remote method 'publish_mqtt_topic' for connection id: 547888421856
webhooks: registering remote method 'notify' for connection id: 547888421856
webhooks: registering remote method 'set_device_power' for connection id: 547888421856
b'Got EOF when reading from device'
Timeout with MCU 'adxl' (eventtime=801446.477689)
Transition to shutdown state: Lost communication with MCU 'adxl'
Dumping gcode input 0 blocks
Dumping 20 requests for client 547888421856
Received 801415.155870: b'{"id": 547813847392, "method": "register_remote_method", "params": {"response_template": {"method": "timelapse_render"}, "remote_method": "timelapse_render"}}'
Received 801415.157110: b'{"id": 547813847392, "method": "register_remote_method", "params": {"response_template": {"method": "publish_mqtt_topic"}, "remote_method": "publish_mqtt_topic"}}'
Received 801415.158232: b'{"id": 547813847392, "method": "register_remote_method", "params": {"response_template": {"method": "notify"}, "remote_method": "notify"}}'
Received 801415.159403: b'{"id": 547813847392, "method": "register_remote_method", "params": {"response_template": {"method": "set_device_power"}, "remote_method": "set_device_power"}}'
Received 801415.162796: b'{"id": 547813792880, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 801415.162796: b'{"id": 547813790576, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 801415.163966: b'{"id": 547813793024, "method": "gcode/script", "params": {"script": "_SET_TIMELAPSE_SETUP  ENABLE=True VERBOSE=False PARK_ENABLE=False PARK_POS=back_right CUSTOM_POS_X=10.0 CUSTOM_POS_Y=10.0 CUSTOM_POS_DZ=0.0 TRAVEL_SPEED=250 RETRACT_SPEED=15 EXTRUDE_SPEED=15 RETRACT_DISTANCE=1.0 EXTRUDE_DISTANCE=1.0 PARK_TIME=0.1 FW_RETRACT=False"}}'
Received 801415.175096: b'{"id": 547812409104, "method": "gcode/script", "params": {"script": "HYPERLAPSE ACTION=STOP"}}'
Received 801415.175096: b'{"id": 547812406560, "method": "info", "params": {}}'
Received 801415.175096: b'{"id": 547809823616, "method": "objects/list", "params": {}}'
Received 801415.175096: b'{"id": 547809824720, "method": "gcode/help", "params": {}}'
Received 801415.185775: b'{"id": 547812408096, "method": "info", "params": {}}'
Received 801415.185775: b'{"id": 547809820784, "method": "objects/list", "params": {}}'
Received 801415.186701: b'{"id": 547809824096, "method": "gcode/help", "params": {}}'
Received 801415.193277: b'{"id": 547812409152, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "configfile": null, "mcu": null, "mcu adxl": null, "stepper_enable": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 stepper_z1": null, "screws_tilt_adjust": null, "gcode_move": null, "probe": null, "bed_mesh": null, "z_tilt": null, "tmc2209 extruder": null, "firmware_retraction": null, "heaters": null, "heater_bed": null, "fan": null, "gcode_macro G29": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "pause_resume": null, "filament_switch_sensor filament_sensor": null, "exclude_object": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro LINE_PURGE": null, "gcode_macro SMART_PARK": null, "gcode_macro _KAMP_Settings": null, "gcode_macro POWER_OFF_PRINTER": null, "gcode_macro POWER_OFF_LIGHT": null, "idle_timeout": null, "motion_report": null, "query_endstops": null, "system_stats": null, "manual_probe": null, "toolhead": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 801415.385276: b'{"id": 547813792736, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "configfile": null, "mcu": null, "mcu adxl": null, "stepper_enable": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 stepper_z1": null, "screws_tilt_adjust": null, "gcode_move": null, "probe": null, "bed_mesh": null, "z_tilt": null, "tmc2209 extruder": null, "firmware_retraction": null, "heaters": null, "heater_bed": null, "fan": null, "gcode_macro G29": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "pause_resume": null, "filament_switch_sensor filament_sensor": null, "exclude_object": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro LINE_PURGE": null, "gcode_macro SMART_PARK": null, "gcode_macro _KAMP_Settings": null, "gcode_macro POWER_OFF_PRINTER": null, "gcode_macro POWER_OFF_LIGHT": null, "idle_timeout": null, "motion_report": null, "query_endstops": null, "system_stats": null, "manual_probe": null, "toolhead": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 801415.635523: b'{"id": 547813792832, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "toolhead": null, "virtual_sdcard": null, "firmware_retraction": null, "motion_report": null, "exclude_object": null, "manual_probe": null, "filament_switch_sensor filament_sensor": null, "mcu": null, "mcu adxl": null, "stepper_enable": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 stepper_z1": null, "screws_tilt_adjust": null, "probe": null, "z_tilt": null, "tmc2209 extruder": null, "heaters": null, "gcode_macro G29": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro LINE_PURGE": null, "gcode_macro SMART_PARK": null, "gcode_macro _KAMP_Settings": null, "gcode_macro POWER_OFF_PRINTER": null, "gcode_macro POWER_OFF_LIGHT": null, "query_endstops": null, "system_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 801415.852385: b'{"id": 547812408240, "method": "objects/query", "params": {"objects": {"extruder": ["can_extrude"]}}}'
Received 801415.890991: b'{"id": 547813790048, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "toolhead": null, "virtual_sdcard": null, "firmware_retraction": null, "motion_report": null, "exclude_object": null, "manual_probe": null, "filament_switch_sensor filament_sensor": null, "mcu": null, "mcu adxl": null, "stepper_enable": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 stepper_z1": null, "screws_tilt_adjust": null, "probe": null, "z_tilt": null, "tmc2209 extruder": null, "heaters": null, "gcode_macro G29": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro LINE_PURGE": null, "gcode_macro SMART_PARK": null, "gcode_macro _KAMP_Settings": null, "gcode_macro POWER_OFF_PRINTER": null, "gcode_macro POWER_OFF_LIGHT": null, "query_endstops": null, "system_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 801416.469192: b'{"id": 547813793360, "method": "objects/query", "params": {"objects": {"extruder": ["can_extrude"]}}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[0.0, 0.0, 0.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (801415.377088726, 0.0, 0.0)
MCU 'mcu' shutdown: Command request
clocksync state: mcu_freq=120000000 last_clock=51561722529 clock_est=(801426.149 49202850477 119993402.090) min_half_rtt=0.000063 min_rtt_time=801413.306 time_avg=801426.149(152.813) clock_avg=49202850477.240(18336520740.501) pred_variance=4438167731.377
Dumping serial stats: bytes_write=2774 bytes_read=9774 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 801413.226787 801413.226787 19: seq: 16, tmcuart_send oid=2 write=b'\xea\x03\x082\x80\x10\x9ah"\x9c' read=0
Sent 1 801413.229402 801413.229402 14: seq: 17, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 2 801413.233670 801413.233670 19: seq: 18, tmcuart_send oid=2 write=b'\xea\x03h2\x80\x00\x02\x08 \xfb' read=0
Sent 3 801413.236405 801413.236405 14: seq: 19, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 4 801413.240703 801413.240703 19: seq: 1a, tmcuart_send oid=2 write=b'\xea\x03\x08>\xe4\x1ar\x88\xa4\x85' read=0
Sent 5 801413.243303 801413.243303 14: seq: 1b, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 6 801413.247660 801413.247660 19: seq: 1c, tmcuart_send oid=2 write=b'\xea\x03(2\x80\x00\x02\x88"\xf3' read=0
Sent 7 801413.250261 801413.250261 14: seq: 1d, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 8 801413.254801 801413.254801 19: seq: 1e, tmcuart_send oid=2 write=b'\xea\x03\x088\x80\x00\x02\x08 \xba' read=0
Sent 9 801413.257452 801413.257452 14: seq: 1f, tmcuart_send oid=2 write=b'\xea\x03H \xe4' read=10
Sent 10 801413.261791 801413.261791 14: seq: 10, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 11 801413.279980 801413.279980 19: seq: 11, tmcuart_send oid=3 write=b'\xea\x03\x080\x80\x00\n\x08\xb8\x87' read=0
Sent 12 801413.283352 801413.283352 14: seq: 12, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 13 801413.288019 801413.288019 19: seq: 13, tmcuart_send oid=3 write=b'\xea\x03h0\x80\x00\x12\x08 \xda' read=0
Sent 14 801413.290745 801413.290745 14: seq: 14, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 15 801413.295071 801413.295071 19: seq: 15, tmcuart_send oid=3 write=b'\xea\x03\x88\xbd\x99\x06\x02h*\x8d' read=0
Sent 16 801413.297705 801413.297705 14: seq: 16, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 17 801413.302053 801413.302053 19: seq: 17, tmcuart_send oid=3 write=b'\xea\x03\x082\x80\x10\x9ah"\x9c' read=0
Sent 18 801413.304709 801413.304709 14: seq: 18, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 19 801413.306095 801413.306095 6: seq: 19, get_clock
Sent 20 801413.309015 801413.309015 19: seq: 1a, tmcuart_send oid=3 write=b'\xea\x03h2\x80\x00\x02\x08 \xfb' read=0
Sent 21 801413.311699 801413.311699 14: seq: 1b, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 22 801413.316010 801413.316010 19: seq: 1c, tmcuart_send oid=3 write=b'\xea\x03\x08>\xe4\x1ar\x88\xa4\x85' read=0
Sent 23 801413.318882 801413.318882 14: seq: 1d, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 24 801413.323303 801413.323303 19: seq: 1e, tmcuart_send oid=3 write=b'\xea\x03(2\x80\x00\x02\x88"\xf3' read=0
Sent 25 801413.325914 801413.325914 14: seq: 1f, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 26 801413.330381 801413.330381 19: seq: 10, tmcuart_send oid=3 write=b'\xea\x03\x088\x80\x00\x02\x08 \xba' read=0
Sent 27 801413.339799 801413.339799 14: seq: 11, tmcuart_send oid=3 write=b'\xea\x03H \xe4' read=10
Sent 28 801413.401118 801413.401118 56: seq: 12, queue_digital_out oid=16 clock=458021423 on_ticks=177000, trsync_start oid=5 report_clock=539621423 report_ticks=12000000 expire_reason=2, stepper_stop_on_trigger oid=13 trsync_oid=5, stepper_stop_on_trigger oid=14 trsync_oid=5, trsync_set_timeout oid=5 clock=569621423, endstop_home oid=4 clock=539621423 sample_ticks=1800 sample_count=4 rest_ticks=120000 pin_value=0 trsync_oid=5 trigger_reason=1
Sent 29 801413.981041 801413.981041 13: seq: 13, queue_digital_out oid=16 clock=527621423 on_ticks=0
Sent 30 801414.290362 801414.290362 6: seq: 14, get_clock
Sent 31 801414.326660 801414.326660 11: seq: 15, buttons_ack oid=20 count=1, trsync_trigger oid=5 reason=3
Sent 32 801414.327264 801414.327264 14: seq: 16, endstop_home oid=4 clock=0 sample_ticks=0 sample_count=0 rest_ticks=0 pin_value=0 trsync_oid=0 trigger_reason=0
Sent 33 801414.327392 801414.327392 8: seq: 17, trsync_trigger oid=5 reason=3
Sent 34 801414.327754 801414.327754 7: seq: 18, stepper_get_position oid=13
Sent 35 801414.328243 801414.328243 14: seq: 19, tmcuart_send oid=2 write=b'\xea\x03H-\xd5' read=10
Sent 36 801414.339218 801414.339218 7: seq: 1a, stepper_get_position oid=14
Sent 37 801414.343574 801414.343574 14: seq: 1b, tmcuart_send oid=3 write=b'\xea\x03H-\xd5' read=10
Sent 38 801414.348401 801414.348401 7: seq: 1c, endstop_query_state oid=4
Sent 39 801414.351890 801414.351890 14: seq: 1d, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 40 801414.356315 801414.356315 19: seq: 1e, tmcuart_send oid=6 write=b'\xea\x03\x080\x80\x00\n\x08\xb8\x87' read=0
Sent 41 801414.358952 801414.358952 14: seq: 1f, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 42 801414.363396 801414.363396 19: seq: 10, tmcuart_send oid=6 write=b'\xea\x03h0\x80\x00\x12\x08 \xda' read=0
Sent 43 801414.366009 801414.366009 14: seq: 11, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 44 801414.371429 801414.371429 19: seq: 12, tmcuart_send oid=6 write=b'\xea\x03\x88=\x9a\x06\x02h*\xbf' read=0
Sent 45 801414.374072 801414.374072 14: seq: 13, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 46 801414.378367 801414.378367 19: seq: 14, tmcuart_send oid=6 write=b'\xea\x03\x082\x80\x10\xb2\xc8\xa2\xa4' read=0
Sent 47 801414.381069 801414.381069 14: seq: 15, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 48 801414.385692 801414.385692 19: seq: 16, tmcuart_send oid=6 write=b'\xea\x03h2\x80\x00\x02\x08 \xfb' read=0
Sent 49 801414.388349 801414.388349 14: seq: 17, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 50 801414.392707 801414.392707 19: seq: 18, tmcuart_send oid=6 write=b'\xea\x03\x08>\xe4\x1ar\x88\xa4\x85' read=0
Sent 51 801414.395319 801414.395319 14: seq: 19, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 52 801414.405789 801414.405789 19: seq: 1a, tmcuart_send oid=6 write=b'\xea\x03(2\x80\x00\x02\x88"\xf3' read=0
Sent 53 801414.410381 801414.410381 14: seq: 1b, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 54 801414.414898 801414.414898 19: seq: 1c, tmcuart_send oid=6 write=b'\xea\x03\x088\x80\x00\x02\x08 \xba' read=0
Sent 55 801414.417516 801414.417516 14: seq: 1d, tmcuart_send oid=6 write=b'\xea\x03H \xe4' read=10
Sent 56 801414.421782 801414.421782 11: seq: 1e, reset_step_clock oid=13 clock=0, reset_step_clock oid=14 clock=0
Sent 57 801414.422436 801414.422436 7: seq: 1f, stepper_get_position oid=7
Sent 58 801414.422972 801414.422972 14: seq: 10, tmcuart_send oid=0 write=b'\xea\x03H-\xd5' read=10
Sent 59 801414.427340 801414.427340 7: seq: 11, stepper_get_position oid=10
Sent 60 801414.427782 801414.427782 14: seq: 12, tmcuart_send oid=1 write=b'\xea\x03H-\xd5' read=10
Sent 61 801414.432532 801414.432532 7: seq: 13, stepper_get_position oid=13
Sent 62 801414.433060 801414.433060 14: seq: 14, tmcuart_send oid=2 write=b'\xea\x03H-\xd5' read=10
Sent 63 801414.437416 801414.437416 7: seq: 15, stepper_get_position oid=14
Sent 64 801414.437909 801414.437909 14: seq: 16, tmcuart_send oid=3 write=b'\xea\x03H-\xd5' read=10
Sent 65 801414.442357 801414.442357 7: seq: 17, stepper_get_position oid=15
Sent 66 801414.443030 801414.443030 14: seq: 18, tmcuart_send oid=6 write=b'\xea\x03H-\xd5' read=10
Sent 67 801415.279106 801415.279106 6: seq: 19, get_clock
Sent 68 801416.261883 801416.261883 6: seq: 1a, get_clock
Sent 69 801417.247009 801417.247009 6: seq: 1b, get_clock
Sent 70 801418.231873 801418.231873 6: seq: 1c, get_clock
Sent 71 801419.216136 801419.216136 6: seq: 1d, get_clock
Sent 72 801420.200834 801420.200834 6: seq: 1e, get_clock
Sent 73 801421.185375 801421.185375 6: seq: 1f, get_clock
Sent 74 801422.169575 801422.169575 6: seq: 10, get_clock
Sent 75 801423.154069 801423.154069 6: seq: 11, get_clock
Sent 76 801424.139832 801424.139832 6: seq: 12, get_clock
Sent 77 801425.123557 801425.123557 6: seq: 13, get_clock
Sent 78 801426.108057 801426.108057 6: seq: 14, get_clock
Sent 79 801427.092388 801427.092388 6: seq: 15, get_clock
Sent 80 801428.076761 801428.076761 6: seq: 16, get_clock
Sent 81 801429.062892 801429.062892 6: seq: 17, get_clock
Sent 82 801430.046092 801430.046092 6: seq: 18, get_clock
Sent 83 801431.030350 801431.030350 6: seq: 19, get_clock
Sent 84 801432.015186 801432.015186 6: seq: 1a, get_clock
Sent 85 801433.000102 801433.000102 6: seq: 1b, get_clock
Sent 86 801433.985117 801433.985117 6: seq: 1c, get_clock
Sent 87 801434.969416 801434.969416 6: seq: 1d, get_clock
Sent 88 801435.955581 801435.955581 6: seq: 1e, get_clock
Sent 89 801436.941310 801436.941310 6: seq: 1f, get_clock
Sent 90 801437.925648 801437.925648 6: seq: 10, get_clock
Sent 91 801438.910622 801438.910622 6: seq: 11, get_clock
Sent 92 801439.895008 801439.895008 6: seq: 12, get_clock
Sent 93 801440.879923 801440.879923 6: seq: 13, get_clock
Sent 94 801441.864912 801441.864912 6: seq: 14, get_clock
Sent 95 801442.849104 801442.849104 6: seq: 15, get_clock
Sent 96 801443.834180 801443.834180 6: seq: 16, get_clock
Sent 97 801444.819361 801444.819361 6: seq: 17, get_clock
Sent 98 801445.806778 801445.806778 6: seq: 18, get_clock
Sent 99 801446.481410 801446.481410 6: seq: 19, emergency_stop
Dumping receive queue 100 messages
Receive: 0 801433.882809 801433.000102 15: seq: 1c, analog_in_state oid=25 next_clock=2921359744 value=30939
Receive: 1 801433.985447 801433.985117 11: seq: 1d, clock clock=2898544368
Receive: 2 801434.102828 801433.985117 15: seq: 1d, analog_in_state oid=17 next_clock=2947759744 value=30752
Receive: 3 801434.182809 801433.985117 15: seq: 1d, analog_in_state oid=25 next_clock=2957359744 value=30939
Receive: 4 801434.403321 801433.985117 15: seq: 1d, analog_in_state oid=17 next_clock=2983759744 value=30750
Receive: 5 801434.482849 801433.985117 15: seq: 1d, analog_in_state oid=25 next_clock=2993359744 value=30946
Receive: 6 801434.702895 801433.985117 15: seq: 1d, analog_in_state oid=17 next_clock=3019759744 value=30750
Receive: 7 801434.782855 801433.985117 15: seq: 1d, analog_in_state oid=25 next_clock=3029359744 value=30941
Receive: 8 801434.969723 801434.969416 11: seq: 1e, clock clock=3016653648
Receive: 9 801435.003543 801434.969416 15: seq: 1e, analog_in_state oid=17 next_clock=3055759744 value=30756
Receive: 10 801435.082898 801434.969416 15: seq: 1e, analog_in_state oid=25 next_clock=3065359744 value=30945
Receive: 11 801435.302880 801434.969416 15: seq: 1e, analog_in_state oid=17 next_clock=3091759744 value=30749
Receive: 12 801435.382910 801434.969416 15: seq: 1e, analog_in_state oid=25 next_clock=3101359744 value=30940
Receive: 13 801435.603493 801434.969416 15: seq: 1e, analog_in_state oid=17 next_clock=3127759744 value=30751
Receive: 14 801435.682917 801434.969416 15: seq: 1e, analog_in_state oid=25 next_clock=3137359744 value=30944
Receive: 15 801435.902943 801434.969416 15: seq: 1e, analog_in_state oid=17 next_clock=3163759744 value=30756
Receive: 16 801435.956054 801435.955581 11: seq: 1f, clock clock=3134990163
Receive: 17 801435.982959 801435.955581 15: seq: 1f, analog_in_state oid=25 next_clock=3173359744 value=30939
Receive: 18 801436.204223 801435.955581 15: seq: 1f, analog_in_state oid=17 next_clock=3199759744 value=30751
Receive: 19 801436.282978 801435.955581 15: seq: 1f, analog_in_state oid=25 next_clock=3209359744 value=30943
Receive: 20 801436.503002 801435.955581 15: seq: 1f, analog_in_state oid=17 next_clock=3235759744 value=30752
Receive: 21 801436.582958 801435.955581 15: seq: 1f, analog_in_state oid=25 next_clock=3245359744 value=30941
Receive: 22 801436.725708 801435.955581 14: seq: 1f, stats count=170 sum=135195 sumsq=739944
Receive: 23 801436.803554 801435.955581 15: seq: 1f, analog_in_state oid=17 next_clock=3271759744 value=30752
Receive: 24 801436.882998 801435.955581 15: seq: 1f, analog_in_state oid=25 next_clock=3281359744 value=30946
Receive: 25 801436.942243 801436.941310 11: seq: 10, clock clock=3253293268
Receive: 26 801437.102973 801436.941310 15: seq: 10, analog_in_state oid=17 next_clock=3307759744 value=30758
Receive: 27 801437.182977 801436.941310 15: seq: 10, analog_in_state oid=25 next_clock=3317359744 value=30945
Receive: 28 801437.403775 801436.941310 15: seq: 10, analog_in_state oid=17 next_clock=3343759744 value=30753
Receive: 29 801437.483284 801436.941310 15: seq: 10, analog_in_state oid=25 next_clock=3353359744 value=30946
Receive: 30 801437.703084 801436.941310 15: seq: 10, analog_in_state oid=17 next_clock=3379759744 value=30756
Receive: 31 801437.783051 801436.941310 15: seq: 10, analog_in_state oid=25 next_clock=3389359744 value=30952
Receive: 32 801437.925927 801437.925648 11: seq: 11, clock clock=3371380438
Receive: 33 801438.003632 801437.925648 15: seq: 11, analog_in_state oid=17 next_clock=3415759744 value=30753
Receive: 34 801438.083073 801437.925648 15: seq: 11, analog_in_state oid=25 next_clock=3425359744 value=30947
Receive: 35 801438.303058 801437.925648 15: seq: 11, analog_in_state oid=17 next_clock=3451759744 value=30752
Receive: 36 801438.383053 801437.925648 15: seq: 11, analog_in_state oid=25 next_clock=3461359744 value=30947
Receive: 37 801438.603864 801437.925648 15: seq: 11, analog_in_state oid=17 next_clock=3487759744 value=30755
Receive: 38 801438.683102 801437.925648 15: seq: 11, analog_in_state oid=25 next_clock=3497359744 value=30949
Receive: 39 801438.903095 801437.925648 15: seq: 11, analog_in_state oid=17 next_clock=3523759744 value=30757
Receive: 40 801438.910945 801438.910622 11: seq: 12, clock clock=3489570058
Receive: 41 801438.983117 801438.910622 15: seq: 12, analog_in_state oid=25 next_clock=3533359744 value=30948
Receive: 42 801439.203899 801438.910622 15: seq: 12, analog_in_state oid=17 next_clock=3559759744 value=30757
Receive: 43 801439.283171 801438.910622 15: seq: 12, analog_in_state oid=25 next_clock=3569359744 value=30948
Receive: 44 801439.503243 801438.910622 15: seq: 12, analog_in_state oid=17 next_clock=3595759744 value=30751
Receive: 45 801439.583106 801438.910622 15: seq: 12, analog_in_state oid=25 next_clock=3605359744 value=30944
Receive: 46 801439.803847 801438.910622 15: seq: 12, analog_in_state oid=17 next_clock=3631759744 value=30756
Receive: 47 801439.883167 801438.910622 15: seq: 12, analog_in_state oid=25 next_clock=3641359744 value=30951
Receive: 48 801439.895264 801439.895008 11: seq: 13, clock clock=3607689763
Receive: 49 801440.103259 801439.895008 15: seq: 13, analog_in_state oid=17 next_clock=3667759744 value=30757
Receive: 50 801440.183243 801439.895008 15: seq: 13, analog_in_state oid=25 next_clock=3677359744 value=30952
Receive: 51 801440.403723 801439.895008 15: seq: 13, analog_in_state oid=17 next_clock=3703759744 value=30755
Receive: 52 801440.483707 801439.895008 15: seq: 13, analog_in_state oid=25 next_clock=3713359744 value=30951
Receive: 53 801440.703269 801439.895008 15: seq: 13, analog_in_state oid=17 next_clock=3739759744 value=30757
Receive: 54 801440.783263 801439.895008 15: seq: 13, analog_in_state oid=25 next_clock=3749359744 value=30949
Receive: 55 801440.880214 801440.879923 11: seq: 14, clock clock=3725875318
Receive: 56 801441.003911 801440.879923 15: seq: 14, analog_in_state oid=17 next_clock=3775759744 value=30759
Receive: 57 801441.083311 801440.879923 15: seq: 14, analog_in_state oid=25 next_clock=3785359744 value=30951
Receive: 58 801441.303304 801440.879923 15: seq: 14, analog_in_state oid=17 next_clock=3811759744 value=30760
Receive: 59 801441.383363 801440.879923 15: seq: 14, analog_in_state oid=25 next_clock=3821359744 value=30947
Receive: 60 801441.603822 801440.879923 15: seq: 14, analog_in_state oid=17 next_clock=3847759744 value=30763
Receive: 61 801441.683298 801440.879923 15: seq: 14, analog_in_state oid=25 next_clock=3857359744 value=30953
Receive: 62 801441.826035 801440.879923 14: seq: 14, stats count=170 sum=135303 sumsq=741414
Receive: 63 801441.865897 801441.864912 11: seq: 15, clock clock=3844101448
Receive: 64 801441.903301 801441.864912 15: seq: 15, analog_in_state oid=17 next_clock=3883759744 value=30759
Receive: 65 801441.983463 801441.864912 15: seq: 15, analog_in_state oid=25 next_clock=3893359744 value=30951
Receive: 66 801442.203992 801441.864912 15: seq: 15, analog_in_state oid=17 next_clock=3919759744 value=30758
Receive: 67 801442.283316 801441.864912 15: seq: 15, analog_in_state oid=25 next_clock=3929359744 value=30954
Receive: 68 801442.503365 801441.864912 15: seq: 15, analog_in_state oid=17 next_clock=3955759744 value=30757
Receive: 69 801442.583325 801441.864912 15: seq: 15, analog_in_state oid=25 next_clock=3965359744 value=30955
Receive: 70 801442.803942 801441.864912 15: seq: 15, analog_in_state oid=17 next_clock=3991759744 value=30762
Receive: 71 801442.849400 801442.849104 11: seq: 16, clock clock=3962161863
Receive: 72 801442.883340 801442.849104 15: seq: 16, analog_in_state oid=25 next_clock=4001359744 value=30952
Receive: 73 801443.103341 801442.849104 15: seq: 16, analog_in_state oid=17 next_clock=4027759744 value=30762
Receive: 74 801443.183356 801442.849104 15: seq: 16, analog_in_state oid=25 next_clock=4037359744 value=30952
Receive: 75 801443.404003 801442.849104 15: seq: 16, analog_in_state oid=17 next_clock=4063759744 value=30760
Receive: 76 801443.483450 801442.849104 15: seq: 16, analog_in_state oid=25 next_clock=4073359744 value=30950
Receive: 77 801443.703368 801442.849104 15: seq: 16, analog_in_state oid=17 next_clock=4099759744 value=30761
Receive: 78 801443.783386 801442.849104 15: seq: 16, analog_in_state oid=25 next_clock=4109359744 value=30954
Receive: 79 801443.834492 801443.834180 11: seq: 17, clock clock=4080363653
Receive: 80 801444.004096 801443.834180 15: seq: 17, analog_in_state oid=17 next_clock=4135759744 value=30757
Receive: 81 801444.083442 801443.834180 15: seq: 17, analog_in_state oid=25 next_clock=4145359744 value=30954
Receive: 82 801444.303419 801443.834180 15: seq: 17, analog_in_state oid=17 next_clock=4171759744 value=30770
Receive: 83 801444.383492 801443.834180 15: seq: 17, analog_in_state oid=25 next_clock=4181359744 value=30953
Receive: 84 801444.603947 801443.834180 15: seq: 17, analog_in_state oid=17 next_clock=4207759744 value=30763
Receive: 85 801444.683453 801443.834180 15: seq: 17, analog_in_state oid=25 next_clock=4217359744 value=30953
Receive: 86 801444.819671 801444.819361 11: seq: 18, clock clock=4198581328
Receive: 87 801444.903453 801444.819361 14: seq: 18, analog_in_state oid=17 next_clock=4243759744 value=30766
Receive: 88 801444.983551 801444.819361 14: seq: 18, analog_in_state oid=25 next_clock=4253359744 value=30954
Receive: 89 801445.203894 801444.819361 14: seq: 18, analog_in_state oid=17 next_clock=4279759744 value=30760
Receive: 90 801445.283495 801444.819361 14: seq: 18, analog_in_state oid=25 next_clock=4289359744 value=30959
Receive: 91 801445.503549 801444.819361 14: seq: 18, analog_in_state oid=17 next_clock=20792448 value=30759
Receive: 92 801445.583459 801444.819361 14: seq: 18, analog_in_state oid=25 next_clock=30392448 value=30958
Receive: 93 801445.804113 801444.819361 14: seq: 18, analog_in_state oid=17 next_clock=56792448 value=30760
Receive: 94 801445.807445 801445.806778 10: seq: 19, clock clock=22114977
Receive: 95 801445.883473 801445.806778 14: seq: 19, analog_in_state oid=25 next_clock=66392448 value=30950
Receive: 96 801446.103517 801445.806778 14: seq: 19, analog_in_state oid=17 next_clock=92792448 value=30764
Receive: 97 801446.183476 801445.806778 14: seq: 19, analog_in_state oid=25 next_clock=102392448 value=30960
Receive: 98 801446.404033 801445.806778 14: seq: 19, analog_in_state oid=17 next_clock=128792448 value=30762
Receive: 99 801446.481873 801446.481410 11: seq: 1a, shutdown clock=103050037 static_string_id=Command request
Attempting MCU 'mcu' reset command
Unable to issue reset command on MCU 'adxl'
webhooks client 547888421856: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:23:55 2023 (1700367835.2 801478.2)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[mcu adxl]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00

[adxl345]
cs_pin = adxl:gpio1
spi_bus = spi0a
axes_map = x,z,y

[resonance_tester]
accel_chip = adxl345
probe_points = 
	150,150, 20

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547887667616: New connection
webhooks client 547887667616: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
Loaded MCU 'mcu' 105 commands (v0.11.0-105-g1e7057e9 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0=P0.28,P0.27 BUS_PINS_i2c1=P0.1,P0.0 BUS_PINS_i2c1a=P0.20,P0.19 BUS_PINS_i2c2=P0.11,P0.10 BUS_PINS_ssp0=P0.17,P0.18,P0.15 BUS_PINS_ssp1=P0.8,P0.9,P0.7 CLOCK_FREQ=120000000 MCU=lpc1769 PWM_MAX=255 RESERVE_PINS_USB=P0.30,P0.29,P2.9 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'adxl': Starting serial connect
mcu 'adxl': got {'count': 348, 'sum': 36929, 'sumsq': 37565, '#name': 'stats', '#sent_time': 801480.353294928, '#receive_time': 801480.399081762}
Loaded MCU 'adxl' 105 commands (v0.11.0-159-gfec7ddd8 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'adxl' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'adxl' printer configuration...
Configured MCU 'adxl' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (0.0, 10.0)     | (27.0, 5.0)
  1   | (35.5, 10.0)    | (62.5, 5.0)
  2   | (71.0, 10.0)    | (98.0, 5.0)
  3   | (106.5, 10.0)   | (133.5, 5.0)
  4   | (142.0, 10.0)   | (169.0, 5.0)
  5   | (177.5, 10.0)   | (204.5, 5.0)
  6   | (213.0, 10.0)   | (240.0, 5.0)
  7   | (213.0, 58.8)   | (240.0, 53.8)
  8   | (177.5, 58.8)   | (204.5, 53.8)
  9   | (142.0, 58.8)   | (169.0, 53.8)
  10  | (106.5, 58.8)   | (133.5, 53.8)
  11  | (71.0, 58.8)    | (98.0, 53.8)
  12  | (35.5, 58.8)    | (62.5, 53.8)
  13  | (0.0, 58.8)     | (27.0, 53.8)
  14  | (0.0, 107.5)    | (27.0, 102.5)
  15  | (35.5, 107.5)   | (62.5, 102.5)
  16  | (71.0, 107.5)   | (98.0, 102.5)
  17  | (106.5, 107.5)  | (133.5, 102.5)
  18  | (142.0, 107.5)  | (169.0, 102.5)
  19  | (177.5, 107.5)  | (204.5, 102.5)
  20  | (213.0, 107.5)  | (240.0, 102.5)
  21  | (213.0, 156.2)  | (240.0, 151.2)
  22  | (177.5, 156.2)  | (204.5, 151.2)
  23  | (142.0, 156.2)  | (169.0, 151.2)
  24  | (106.5, 156.2)  | (133.5, 151.2)
  25  | (71.0, 156.2)   | (98.0, 151.2)
  26  | (35.5, 156.2)   | (62.5, 151.2)
  27  | (0.0, 156.2)    | (27.0, 151.2)
  28  | (0.0, 205.0)    | (27.0, 200.0)
  29  | (35.5, 205.0)   | (62.5, 200.0)
  30  | (71.0, 205.0)   | (98.0, 200.0)
  31  | (106.5, 205.0)  | (133.5, 200.0)
  32  | (142.0, 205.0)  | (169.0, 200.0)
  33  | (177.5, 205.0)  | (204.5, 200.0)
  34  | (213.0, 205.0)  | (240.0, 200.0)
Starting heater checks for extruder
Starting heater checks for heater_bed
Stats 801481.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2835 bytes_read=5975 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=120021189 adxl: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=779 bytes_read=4084 bytes_retransmit=9 bytes_invalid=0 send_seq=106 receive_seq=106 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11989057 adj=11963590 heater_bed: target=0 temp=0.0 pwm=0.000  sysload=0.21 cputime=14.394 memavail=7287324 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 547887667616
webhooks: registering remote method 'reboot_machine' for connection id: 547887667616
webhooks: registering remote method 'pause_job_queue' for connection id: 547887667616
webhooks: registering remote method 'start_job_queue' for connection id: 547887667616
webhooks: registering remote method 'timelapse_newframe' for connection id: 547887667616
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 547887667616
webhooks: registering remote method 'timelapse_render' for connection id: 547887667616
webhooks: registering remote method 'publish_mqtt_topic' for connection id: 547887667616
webhooks: registering remote method 'notify' for connection id: 547887667616
webhooks: registering remote method 'set_device_power' for connection id: 547887667616
Stats 801482.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2849 bytes_read=6126 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=120003435 adxl: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=785 bytes_read=4099 bytes_retransmit=9 bytes_invalid=0 send_seq=107 receive_seq=107 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11992219 adj=11997021 heater_bed: target=0 temp=32.0 pwm=0.000  sysload=0.21 cputime=14.453 memavail=7285828 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 801483.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2855 bytes_read=6247 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119997487 adxl: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=791 bytes_read=4114 bytes_retransmit=9 bytes_invalid=0 send_seq=108 receive_seq=108 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11994163 adj=12003128 heater_bed: target=0 temp=32.0 pwm=0.000  sysload=0.21 cputime=14.484 memavail=7284876 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 801484.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2861 bytes_read=6353 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119995227 adxl: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=797 bytes_read=4129 bytes_retransmit=9 bytes_invalid=0 send_seq=109 receive_seq=109 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11995372 adj=12005313 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.21 cputime=14.499 memavail=7283672 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 801485.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2867 bytes_read=6474 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994276 adxl: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000047 bytes_write=803 bytes_read=4157 bytes_retransmit=9 bytes_invalid=0 send_seq=110 receive_seq=110 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11996872 adj=12005737 heater_bed: target=0 temp=32.0 pwm=0.000  sysload=0.21 cputime=14.518 memavail=7283224 print_time=0.011 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:zv shaper_freq_y:51.000 damping_ratio_y:0.100000
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got f2 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got f2 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
ADXL345 starting 'adxl345' measurements
Stats 801486.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2873 bytes_read=6595 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994909 adxl: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000047 bytes_write=1001 bytes_read=20541 bytes_retransmit=9 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11997162 adj=12007119 heater_bed: target=0 temp=32.0 pwm=0.000  sysload=0.19 cputime=14.684 memavail=7279492 print_time=10.495 buffer_time=1.403 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 801487.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=2879 bytes_read=6701 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994202 adxl: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000047 bytes_write=1077 bytes_read=39624 bytes_retransmit=9 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11997435 adj=12002004 heater_bed: target=0 temp=32.0 pwm=0.000  sysload=0.19 cputime=14.848 memavail=7279016 print_time=10.495 buffer_time=0.402 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 801489.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2885 bytes_read=6881 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994202 adxl: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000047 bytes_write=1111 bytes_read=69432 bytes_retransmit=9 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11997822 adj=12003037 heater_bed: target=0 temp=32.0 pwm=0.000  sysload=0.19 cputime=15.619 memavail=7275344 print_time=10.495 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Axes noise for xy-axis accelerometer: 80.669521 (x), 178.518939 (y), 85.784630 (z)
ADXL345 finished 'adxl345' measurements
Stats 801490.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2891 bytes_read=7017 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993515 adxl: mcu_awake=0.292 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1133 bytes_read=70941 bytes_retransmit=9 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11998056 adj=12002900 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.19 cputime=15.761 memavail=7267412 print_time=10.495 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 801491.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2897 bytes_read=7123 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993540 adxl: mcu_awake=0.292 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1139 bytes_read=70957 bytes_retransmit=9 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11998244 adj=12002740 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.19 cputime=15.783 memavail=7270328 print_time=10.495 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 801492.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2903 bytes_read=7229 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993462 adxl: mcu_awake=0.292 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1145 bytes_read=70973 bytes_retransmit=9 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11998384 adj=12002410 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.18 cputime=15.802 memavail=7271664 print_time=10.495 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 801493.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2909 bytes_read=7379 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993285 adxl: mcu_awake=0.292 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1151 bytes_read=70989 bytes_retransmit=9 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11998501 adj=12002111 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.18 cputime=15.817 memavail=7271308 print_time=10.495 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 801494.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2915 bytes_read=7485 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993202 adxl: mcu_awake=0.292 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1157 bytes_read=71005 bytes_retransmit=9 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11998605 adj=12001897 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.18 cputime=15.833 memavail=7277824 print_time=10.495 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
TMC 'stepper_z' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z1' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z' reports GSTAT:      00000000
TMC 'stepper_z1' reports GSTAT:      00000000
Stats 801495.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4125 bytes_read=8515 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993114 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1163 bytes_read=71032 bytes_retransmit=9 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11998706 adj=12001703 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.18 cputime=16.001 memavail=7272452 print_time=18.015 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
TMC 'stepper_x' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_x' reports GSTAT:      00000000
TMC 'stepper_y' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 801496.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=5650 bytes_read=10097 bytes_retransmit=9 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994397 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1169 bytes_read=71048 bytes_retransmit=9 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11998880 adj=12001403 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.18 cputime=16.155 memavail=7272228 print_time=18.879 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 801497.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6103 bytes_read=10652 bytes_retransmit=9 bytes_invalid=0 send_seq=436 receive_seq=436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119994341 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1175 bytes_read=71064 bytes_retransmit=9 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11998929 adj=12001174 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.16 cputime=16.240 memavail=7272228 print_time=19.879 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 801498.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=6911 bytes_read=11221 bytes_retransmit=9 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119994058 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1181 bytes_read=71080 bytes_retransmit=9 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11998973 adj=12001013 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.16 cputime=16.293 memavail=7280388 print_time=20.957 buffer_time=0.278 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 801499.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=7070 bytes_read=11541 bytes_retransmit=9 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993925 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1187 bytes_read=71096 bytes_retransmit=9 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999027 adj=12000991 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.16 cputime=16.324 memavail=7280388 print_time=20.957 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 801500.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=7356 bytes_read=12002 bytes_retransmit=9 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=119994074 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1193 bytes_read=71123 bytes_retransmit=9 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999078 adj=12001095 heater_bed: target=0 temp=31.9 pwm=0.000  sysload=0.16 cputime=16.385 memavail=7280164 print_time=22.892 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 801501.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=8083 bytes_read=12543 bytes_retransmit=9 bytes_invalid=0 send_seq=527 receive_seq=527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993871 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1199 bytes_read=71139 bytes_retransmit=9 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999114 adj=12000853 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.16 cputime=16.448 memavail=7280164 print_time=23.842 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 801502.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=8691 bytes_read=13088 bytes_retransmit=9 bytes_invalid=0 send_seq=556 receive_seq=556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993741 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1205 bytes_read=71155 bytes_retransmit=9 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999148 adj=12000901 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.15 cputime=16.517 memavail=7280164 print_time=24.842 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 801503.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=9304 bytes_read=13638 bytes_retransmit=9 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993624 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1211 bytes_read=71171 bytes_retransmit=9 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999181 adj=12000891 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.15 cputime=16.593 memavail=7279940 print_time=25.842 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 801504.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=9917 bytes_read=14188 bytes_retransmit=9 bytes_invalid=0 send_seq=616 receive_seq=616 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119993511 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1217 bytes_read=71187 bytes_retransmit=9 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999216 adj=12000886 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.15 cputime=16.675 memavail=7279940 print_time=26.842 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 801505.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=10558 bytes_read=14743 bytes_retransmit=9 bytes_invalid=0 send_seq=647 receive_seq=647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993428 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1223 bytes_read=71214 bytes_retransmit=9 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999244 adj=12000917 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.15 cputime=16.756 memavail=7279940 print_time=27.892 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 801506.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=11166 bytes_read=15273 bytes_retransmit=9 bytes_invalid=0 send_seq=676 receive_seq=676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993364 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1229 bytes_read=71230 bytes_retransmit=9 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999270 adj=12000877 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.15 cputime=16.827 memavail=7279716 print_time=28.892 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 801507.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=11774 bytes_read=15818 bytes_retransmit=9 bytes_invalid=0 send_seq=705 receive_seq=705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993300 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1235 bytes_read=71246 bytes_retransmit=9 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999296 adj=12000856 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.14 cputime=16.903 memavail=7279716 print_time=29.892 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 801508.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=12685 bytes_read=16390 bytes_retransmit=9 bytes_invalid=0 send_seq=738 receive_seq=738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993268 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1241 bytes_read=71262 bytes_retransmit=9 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999320 adj=12000846 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.14 cputime=16.978 memavail=7279492 print_time=30.882 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 801509.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=13271 bytes_read=16983 bytes_retransmit=9 bytes_invalid=0 send_seq=770 receive_seq=770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993476 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1247 bytes_read=71278 bytes_retransmit=9 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999352 adj=12000820 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.14 cputime=17.055 memavail=7279492 print_time=31.573 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 801510.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=14583 bytes_read=17541 bytes_retransmit=9 bytes_invalid=0 send_seq=806 receive_seq=806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993412 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1253 bytes_read=71305 bytes_retransmit=9 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999373 adj=12000733 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.14 cputime=17.114 memavail=7279492 print_time=34.446 buffer_time=1.761 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 801511.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=14701 bytes_read=17846 bytes_retransmit=9 bytes_invalid=0 send_seq=815 receive_seq=815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993343 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1259 bytes_read=71321 bytes_retransmit=9 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999395 adj=12000408 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.14 cputime=17.158 memavail=7279240 print_time=34.446 buffer_time=0.761 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
ADXL345 starting 'adxl345' measurements
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 10000.000000
square_corner_velocity: 5.000000
Disabled [input_shaper] for resonance testing
Testing frequency 5 Hz
Testing frequency 6 Hz
Testing frequency 7 Hz
Testing frequency 8 Hz
Testing frequency 9 Hz
Stats 801512.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=21527 bytes_read=18681 bytes_retransmit=9 bytes_invalid=0 send_seq=933 receive_seq=933 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993323 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1392 bytes_read=72772 bytes_retransmit=9 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999414 adj=12000617 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.12 cputime=17.280 memavail=7278736 print_time=39.277 buffer_time=4.591 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 801513.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=21661 bytes_read=18995 bytes_retransmit=9 bytes_invalid=0 send_seq=942 receive_seq=942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993269 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1468 bytes_read=91902 bytes_retransmit=9 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999430 adj=12000117 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.12 cputime=17.479 memavail=7278752 print_time=39.277 buffer_time=3.589 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 801514.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=21779 bytes_read=19292 bytes_retransmit=9 bytes_invalid=0 send_seq=951 receive_seq=951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993364 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1544 bytes_read=110988 bytes_retransmit=9 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999458 adj=12000197 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.12 cputime=17.633 memavail=7278752 print_time=39.277 buffer_time=2.588 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 801515.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=22859 bytes_read=19654 bytes_retransmit=9 bytes_invalid=0 send_seq=975 receive_seq=975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993314 adxl: mcu_awake=0.247 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1620 bytes_read=130030 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999472 adj=12000264 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.12 cputime=17.789 memavail=7278752 print_time=39.765 buffer_time=2.075 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Testing frequency 10 Hz
Stats 801516.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=25122 bytes_read=20129 bytes_retransmit=9 bytes_invalid=0 send_seq=1018 receive_seq=1018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993275 adxl: mcu_awake=0.247 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1696 bytes_read=149056 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999485 adj=12000336 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.12 cputime=17.958 memavail=7278752 print_time=40.814 buffer_time=2.124 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Testing frequency 11 Hz
Stats 801517.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000016 bytes_write=27316 bytes_read=20599 bytes_retransmit=9 bytes_invalid=0 send_seq=1060 receive_seq=1060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993235 adxl: mcu_awake=0.247 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1772 bytes_read=168082 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999500 adj=12000410 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.11 cputime=18.154 memavail=7278248 print_time=41.790 buffer_time=2.099 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Testing frequency 12 Hz
Stats 801518.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=29808 bytes_read=21094 bytes_retransmit=9 bytes_invalid=0 send_seq=1107 receive_seq=1107 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993428 adxl: mcu_awake=0.247 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1848 bytes_read=187168 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999520 adj=12000493 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.11 cputime=18.389 memavail=7277492 print_time=42.849 buffer_time=2.157 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Testing frequency 13 Hz
Stats 801519.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=32263 bytes_read=21584 bytes_retransmit=9 bytes_invalid=0 send_seq=1153 receive_seq=1153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993385 adxl: mcu_awake=0.247 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1924 bytes_read=206194 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999530 adj=12000496 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.11 cputime=18.610 memavail=7276736 print_time=43.844 buffer_time=2.151 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Testing frequency 14 Hz
Stats 801520.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=34940 bytes_read=22089 bytes_retransmit=9 bytes_invalid=0 send_seq=1202 receive_seq=1202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993341 adxl: mcu_awake=0.415 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=2000 bytes_read=225357 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999541 adj=12000584 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.11 cputime=18.841 memavail=7276236 print_time=44.874 buffer_time=2.174 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Testing frequency 15 Hz
Stats 801521.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=37561 bytes_read=22579 bytes_retransmit=9 bytes_invalid=0 send_seq=1251 receive_seq=1251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993304 adxl: mcu_awake=0.415 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=2076 bytes_read=244563 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999555 adj=12000689 heater_bed: target=0 temp=31.8 pwm=0.000  sysload=0.11 cputime=19.072 memavail=7275228 print_time=45.852 buffer_time=2.143 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Testing frequency 16 Hz
Stats 801522.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=40347 bytes_read=23094 bytes_retransmit=9 bytes_invalid=0 send_seq=1302 receive_seq=1302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993287 adxl: mcu_awake=0.415 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=2152 bytes_read=263709 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999565 adj=12000773 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.19 cputime=19.304 memavail=7271980 print_time=46.877 buffer_time=2.164 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Testing frequency 17 Hz
Transition to shutdown state: Shutdown due to webhooks request
Dumping gcode input 0 blocks
Dumping 20 requests for client 547887667616
Received 801482.665644: b'{"id": 547823060688, "method": "register_remote_method", "params": {"response_template": {"method": "notify"}, "remote_method": "notify"}}'
Received 801482.666764: b'{"id": 547823060688, "method": "register_remote_method", "params": {"response_template": {"method": "set_device_power"}, "remote_method": "set_device_power"}}'
Received 801482.670808: b'{"id": 547813793264, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 801482.671118: b'{"id": 547813792976, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 801482.671940: b'{"id": 547813791488, "method": "gcode/script", "params": {"script": "_SET_TIMELAPSE_SETUP  ENABLE=True VERBOSE=False PARK_ENABLE=False PARK_POS=back_right CUSTOM_POS_X=10.0 CUSTOM_POS_Y=10.0 CUSTOM_POS_DZ=0.0 TRAVEL_SPEED=250 RETRACT_SPEED=15 EXTRUDE_SPEED=15 RETRACT_DISTANCE=1.0 EXTRUDE_DISTANCE=1.0 PARK_TIME=0.1 FW_RETRACT=False"}}'
Received 801482.680776: b'{"id": 547847056880, "method": "gcode/script", "params": {"script": "HYPERLAPSE ACTION=STOP"}}'
Received 801482.868682: b'{"id": 547847056688, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "toolhead": null, "virtual_sdcard": null, "firmware_retraction": null, "motion_report": null, "exclude_object": null, "manual_probe": null, "filament_switch_sensor filament_sensor": null, "mcu": null, "mcu adxl": null, "stepper_enable": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 stepper_z1": null, "screws_tilt_adjust": null, "probe": null, "z_tilt": null, "tmc2209 extruder": null, "heaters": null, "gcode_macro G29": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro LINE_PURGE": null, "gcode_macro SMART_PARK": null, "gcode_macro _KAMP_Settings": null, "gcode_macro POWER_OFF_PRINTER": null, "gcode_macro POWER_OFF_LIGHT": null, "query_endstops": null, "system_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 801483.135527: b'{"id": 547813793744, "method": "info", "params": {}}'
Received 801483.135527: b'{"id": 547813791152, "method": "objects/list", "params": {}}'
Received 801483.135527: b'{"id": 547846945472, "method": "gcode/help", "params": {}}'
Received 801483.145831: b'{"id": 547847057312, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "toolhead": null, "virtual_sdcard": null, "firmware_retraction": null, "motion_report": null, "exclude_object": null, "manual_probe": null, "filament_switch_sensor filament_sensor": null, "mcu": null, "mcu adxl": null, "stepper_enable": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 stepper_z1": null, "screws_tilt_adjust": null, "probe": null, "z_tilt": null, "tmc2209 extruder": null, "heaters": null, "gcode_macro G29": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro LINE_PURGE": null, "gcode_macro SMART_PARK": null, "gcode_macro _KAMP_Settings": null, "gcode_macro POWER_OFF_PRINTER": null, "gcode_macro POWER_OFF_LIGHT": null, "query_endstops": null, "system_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 801483.391687: b'{"id": 547813789856, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "configfile": null, "mcu": null, "mcu adxl": null, "stepper_enable": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 stepper_z1": null, "screws_tilt_adjust": null, "gcode_move": null, "probe": null, "bed_mesh": null, "z_tilt": null, "tmc2209 extruder": null, "firmware_retraction": null, "heaters": null, "heater_bed": null, "fan": null, "gcode_macro G29": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "pause_resume": null, "filament_switch_sensor filament_sensor": null, "exclude_object": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro LINE_PURGE": null, "gcode_macro SMART_PARK": null, "gcode_macro _KAMP_Settings": null, "gcode_macro POWER_OFF_PRINTER": null, "gcode_macro POWER_OFF_LIGHT": null, "idle_timeout": null, "motion_report": null, "query_endstops": null, "system_stats": null, "manual_probe": null, "toolhead": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 801483.426038: b'{"id": 547813790480, "method": "objects/query", "params": {"objects": {"extruder": ["can_extrude"]}}}'
Received 801484.458071: b'{"id": 547813791056, "method": "objects/query", "params": {"objects": {"extruder": ["can_extrude"]}}}'
Received 801485.906946: b'{"id": 547813793312, "method": "gcode/script", "params": {"script": "SET_INPUT_SHAPER"}}'
Received 801485.921224: b'{"id": 547813791584, "method": "gcode/script", "params": {"script": "ACCELEROMETER_QUERY"}}'
Received 801485.923022: b'{"id": 547847056160, "method": "gcode/script", "params": {"script": "MEASURE_AXES_NOISE"}}'
Received 801494.979176: b'{"id": 547813793024, "method": "gcode/script", "params": {"script": "G28"}}'
Received 801494.999482: b'{"id": 547813793120, "method": "gcode/script", "params": {"script": "SHAPER_CALIBRATE AXIS=Y"}}'
Received 801522.852604: b'{"id": 547813791392, "method": "emergency_stop", "params": {}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[150.0, 150.0, 20.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (801522.627492385, 801521.723881515, 0.0)
Dumping stepper 'stepper_y' (mcu) 60 queue_step:
queue_step 0: t=5393376476 p=-2997 i=90774 c=5 a=6628
queue_step 1: t=5393935964 p=-2992 i=130112 c=3 a=20219
queue_step 2: t=5394475769 p=-2989 i=218924 c=1 a=0
queue_step 3: t=5394822637 p=-2988 i=346868 c=1 a=0
queue_step 4: t=5395418336 p=-2987 i=595699 c=-1 a=0
queue_step 5: t=5395765204 p=-2988 i=346868 c=-1 a=0
queue_step 6: t=5395982233 p=-2989 i=217029 c=-1 a=0
queue_step 7: t=5396151701 p=-2990 i=169468 c=-3 a=-19117
queue_step 8: t=5396549470 p=-2993 i=116184 c=-6 a=-6119
queue_step 9: t=5397120706 p=-2999 i=82101 c=-4 a=916
queue_step 10: t=5397463352 p=-3003 i=90847 c=-5 a=6634
queue_step 11: t=5398023513 p=-3008 i=130433 c=-3 a=20324
queue_step 12: t=5398566146 p=-3011 i=220795 c=-1 a=0
queue_step 13: t=5398921753 p=-3012 i=355607 c=-1 a=0
queue_step 14: t=5399483420 p=-3013 i=561667 c=1 a=0
queue_step 15: t=5399839028 p=-3012 i=355608 c=1 a=0
queue_step 16: t=5400057717 p=-3011 i=218689 c=1 a=0
queue_step 17: t=5400227916 p=-3010 i=170199 c=3 a=-19376
queue_step 18: t=5400626533 p=-3007 i=116347 c=6 a=-6156
queue_step 19: t=5401198070 p=-3001 i=82142 c=4 a=894
queue_step 20: t=5401540771 p=-2997 i=90911 c=5 a=6645
queue_step 21: t=5402101606 p=-2992 i=130741 c=3 a=20442
queue_step 22: t=5402647112 p=-2989 i=222698 c=1 a=0
queue_step 23: t=5403012330 p=-2988 i=365218 c=1 a=0
queue_step 24: t=5403538193 p=-2987 i=525863 c=-1 a=0
queue_step 25: t=5403903410 p=-2988 i=365217 c=-1 a=0
queue_step 26: t=5404123795 p=-2989 i=220385 c=-1 a=0
queue_step 27: t=5404295038 p=-2990 i=171243 c=-3 a=-20171
queue_step 28: t=5404694178 p=-2993 i=117167 c=-6 a=-6487
queue_step 29: t=5405266147 p=-2999 i=83439 c=-3 a=0
queue_step 30: t=5405517771 p=-3002 i=84746 c=-6 a=6490
queue_step 31: t=5406170289 p=-3008 i=131438 c=-3 a=20193
queue_step 32: t=5406718735 p=-3011 i=224991 c=-1 a=0
queue_step 33: t=5407094629 p=-3012 i=375894 c=-1 a=0
queue_step 34: t=5407582520 p=-3013 i=487891 c=1 a=0
queue_step 35: t=5407958415 p=-3012 i=375895 c=1 a=0
queue_step 36: t=5408180533 p=-3011 i=222118 c=1 a=0
queue_step 37: t=5408352504 p=-3010 i=171971 c=3 a=-20449
queue_step 38: t=5408752496 p=-3007 i=117397 c=6 a=-6557
queue_step 39: t=5409324645 p=-3001 i=83519 c=3 a=0
queue_step 40: t=5409576446 p=-2998 i=84763 c=6 a=6511
queue_step 41: t=5410229543 p=-2992 i=131617 c=3 a=20568
queue_step 42: t=5410781081 p=-2989 i=226600 c=1 a=0
queue_step 43: t=5411168997 p=-2988 i=387916 c=1 a=0
queue_step 44: t=5411616187 p=-2987 i=447190 c=-1 a=0
queue_step 45: t=5412004103 p=-2988 i=387916 c=-1 a=0
queue_step 46: t=5412227994 p=-2989 i=223891 c=-1 a=0
queue_step 47: t=5412400717 p=-2990 i=172723 c=-3 a=-20763
queue_step 48: t=5412801584 p=-2993 i=117710 c=-5 a=-6674
queue_step 49: t=5413290749 p=-2998 i=85065 c=-4 a=-1064
queue_step 50: t=5413625315 p=-3002 i=85755 c=-5 a=6196
queue_step 51: t=5414148142 p=-3007 i=117847 c=-3 a=16146
queue_step 52: t=5414608512 p=-3010 i=176238 c=-1 a=0
queue_step 53: t=5414834216 p=-3011 i=225704 c=-1 a=0
queue_step 54: t=5415235913 p=-3012 i=401697 c=-1 a=0
queue_step 55: t=5415638225 p=-3013 i=402312 c=2 a=0
queue_step 56: t=5416266241 p=-3011 i=225704 c=1 a=0
queue_step 57: t=5416439731 p=-3010 i=173490 c=3 a=-21096
queue_step 58: t=5416841567 p=-3007 i=118144 c=5 a=-6868
queue_step 59: t=5417330907 p=-3002 i=85444 c=4 a=-1308
MCU 'adxl' shutdown: Command request
clocksync state: mcu_freq=12000000 last_clock=618984400 clock_est=(801500.097 356376513 11999565.316) min_half_rtt=0.000068 min_rtt_time=801498.347 time_avg=801500.097(228.173) clock_avg=356376513.314(2737975064.043) pred_variance=73284323.562 clock_adj=(-7.411 12000753.764)
Dumping serial stats: bytes_write=2179 bytes_read=270030 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 801513.849091 801513.849091 7: seq: 17, query_adxl345_status oid=1
Sent 1 801513.950119 801513.950119 7: seq: 18, query_adxl345_status oid=1
Sent 2 801514.050582 801514.050582 7: seq: 19, query_adxl345_status oid=1
Sent 3 801514.104727 801514.104727 6: seq: 1a, get_clock
Sent 4 801514.150917 801514.150917 7: seq: 1b, query_adxl345_status oid=1
Sent 5 801514.252065 801514.252065 7: seq: 1c, query_adxl345_status oid=1
Sent 6 801514.352802 801514.352802 7: seq: 1d, query_adxl345_status oid=1
Sent 7 801514.453385 801514.453385 7: seq: 1e, query_adxl345_status oid=1
Sent 8 801514.553470 801514.553470 7: seq: 1f, query_adxl345_status oid=1
Sent 9 801514.654927 801514.654927 7: seq: 10, query_adxl345_status oid=1
Sent 10 801514.755186 801514.755186 7: seq: 11, query_adxl345_status oid=1
Sent 11 801514.855758 801514.855758 7: seq: 12, query_adxl345_status oid=1
Sent 12 801514.956683 801514.956683 7: seq: 13, query_adxl345_status oid=1
Sent 13 801515.056965 801515.056965 7: seq: 14, query_adxl345_status oid=1
Sent 14 801515.086955 801515.086955 6: seq: 15, get_clock
Sent 15 801515.157001 801515.157001 7: seq: 16, query_adxl345_status oid=1
Sent 16 801515.257869 801515.257869 7: seq: 17, query_adxl345_status oid=1
Sent 17 801515.358541 801515.358541 7: seq: 18, query_adxl345_status oid=1
Sent 18 801515.459468 801515.459468 7: seq: 19, query_adxl345_status oid=1
Sent 19 801515.559991 801515.559991 7: seq: 1a, query_adxl345_status oid=1
Sent 20 801515.660241 801515.660241 7: seq: 1b, query_adxl345_status oid=1
Sent 21 801515.761143 801515.761143 7: seq: 1c, query_adxl345_status oid=1
Sent 22 801515.861493 801515.861493 7: seq: 1d, query_adxl345_status oid=1
Sent 23 801515.961814 801515.961814 7: seq: 1e, query_adxl345_status oid=1
Sent 24 801516.063034 801516.063034 7: seq: 1f, query_adxl345_status oid=1
Sent 25 801516.071789 801516.071789 6: seq: 10, get_clock
Sent 26 801516.163666 801516.163666 7: seq: 11, query_adxl345_status oid=1
Sent 27 801516.264258 801516.264258 7: seq: 12, query_adxl345_status oid=1
Sent 28 801516.368833 801516.368833 7: seq: 13, query_adxl345_status oid=1
Sent 29 801516.466280 801516.466280 7: seq: 14, query_adxl345_status oid=1
Sent 30 801516.568799 801516.568799 7: seq: 15, query_adxl345_status oid=1
Sent 31 801516.668080 801516.668080 7: seq: 16, query_adxl345_status oid=1
Sent 32 801516.770733 801516.770733 7: seq: 17, query_adxl345_status oid=1
Sent 33 801516.869418 801516.869418 7: seq: 18, query_adxl345_status oid=1
Sent 34 801516.973348 801516.973348 7: seq: 19, query_adxl345_status oid=1
Sent 35 801517.056872 801517.056872 6: seq: 1a, get_clock
Sent 36 801517.071191 801517.071191 7: seq: 1b, query_adxl345_status oid=1
Sent 37 801517.175064 801517.175064 7: seq: 1c, query_adxl345_status oid=1
Sent 38 801517.272816 801517.272816 7: seq: 1d, query_adxl345_status oid=1
Sent 39 801517.375980 801517.375980 7: seq: 1e, query_adxl345_status oid=1
Sent 40 801517.475249 801517.475249 7: seq: 1f, query_adxl345_status oid=1
Sent 41 801517.586456 801517.586456 7: seq: 10, query_adxl345_status oid=1
Sent 42 801517.677653 801517.677653 7: seq: 11, query_adxl345_status oid=1
Sent 43 801517.779832 801517.779832 7: seq: 12, query_adxl345_status oid=1
Sent 44 801517.878933 801517.878933 7: seq: 13, query_adxl345_status oid=1
Sent 45 801517.980678 801517.980678 7: seq: 14, query_adxl345_status oid=1
Sent 46 801518.043535 801518.043535 6: seq: 15, get_clock
Sent 47 801518.080614 801518.080614 7: seq: 16, query_adxl345_status oid=1
Sent 48 801518.181716 801518.181716 7: seq: 17, query_adxl345_status oid=1
Sent 49 801518.282457 801518.282457 7: seq: 18, query_adxl345_status oid=1
Sent 50 801518.383004 801518.383004 7: seq: 19, query_adxl345_status oid=1
Sent 51 801518.484708 801518.484708 7: seq: 1a, query_adxl345_status oid=1
Sent 52 801518.585623 801518.585623 7: seq: 1b, query_adxl345_status oid=1
Sent 53 801518.686605 801518.686605 7: seq: 1c, query_adxl345_status oid=1
Sent 54 801518.787406 801518.787406 7: seq: 1d, query_adxl345_status oid=1
Sent 55 801518.887841 801518.887841 7: seq: 1e, query_adxl345_status oid=1
Sent 56 801518.989336 801518.989336 7: seq: 1f, query_adxl345_status oid=1
Sent 57 801519.026285 801519.026285 6: seq: 10, get_clock
Sent 58 801519.090383 801519.090383 7: seq: 11, query_adxl345_status oid=1
Sent 59 801519.191153 801519.191153 7: seq: 12, query_adxl345_status oid=1
Sent 60 801519.291310 801519.291310 7: seq: 13, query_adxl345_status oid=1
Sent 61 801519.392028 801519.392028 7: seq: 14, query_adxl345_status oid=1
Sent 62 801519.492738 801519.492738 7: seq: 15, query_adxl345_status oid=1
Sent 63 801519.593809 801519.593809 7: seq: 16, query_adxl345_status oid=1
Sent 64 801519.695173 801519.695173 7: seq: 17, query_adxl345_status oid=1
Sent 65 801519.797065 801519.797065 7: seq: 18, query_adxl345_status oid=1
Sent 66 801519.898198 801519.898198 7: seq: 19, query_adxl345_status oid=1
Sent 67 801519.998887 801519.998887 7: seq: 1a, query_adxl345_status oid=1
Sent 68 801520.011494 801520.011494 6: seq: 1b, get_clock
Sent 69 801520.099515 801520.099515 7: seq: 1c, query_adxl345_status oid=1
Sent 70 801520.200053 801520.200053 7: seq: 1d, query_adxl345_status oid=1
Sent 71 801520.301129 801520.301129 7: seq: 1e, query_adxl345_status oid=1
Sent 72 801520.401744 801520.401744 7: seq: 1f, query_adxl345_status oid=1
Sent 73 801520.502633 801520.502633 7: seq: 10, query_adxl345_status oid=1
Sent 74 801520.602969 801520.602969 7: seq: 11, query_adxl345_status oid=1
Sent 75 801520.704457 801520.704457 7: seq: 12, query_adxl345_status oid=1
Sent 76 801520.804929 801520.804929 7: seq: 13, query_adxl345_status oid=1
Sent 77 801520.907690 801520.907690 7: seq: 14, query_adxl345_status oid=1
Sent 78 801520.995695 801520.995695 6: seq: 15, get_clock
Sent 79 801521.007062 801521.007062 7: seq: 16, query_adxl345_status oid=1
Sent 80 801521.109663 801521.109663 7: seq: 17, query_adxl345_status oid=1
Sent 81 801521.208975 801521.208975 7: seq: 18, query_adxl345_status oid=1
Sent 82 801521.310366 801521.310366 7: seq: 19, query_adxl345_status oid=1
Sent 83 801521.410378 801521.410378 7: seq: 1a, query_adxl345_status oid=1
Sent 84 801521.511970 801521.511970 7: seq: 1b, query_adxl345_status oid=1
Sent 85 801521.611220 801521.611220 7: seq: 1c, query_adxl345_status oid=1
Sent 86 801521.712959 801521.712959 7: seq: 1d, query_adxl345_status oid=1
Sent 87 801521.812140 801521.812140 7: seq: 1e, query_adxl345_status oid=1
Sent 88 801521.914828 801521.914828 7: seq: 1f, query_adxl345_status oid=1
Sent 89 801521.981245 801521.981245 6: seq: 10, get_clock
Sent 90 801522.014273 801522.014273 7: seq: 11, query_adxl345_status oid=1
Sent 91 801522.116108 801522.116108 7: seq: 12, query_adxl345_status oid=1
Sent 92 801522.216185 801522.216185 7: seq: 13, query_adxl345_status oid=1
Sent 93 801522.316748 801522.316748 7: seq: 14, query_adxl345_status oid=1
Sent 94 801522.417102 801522.417102 7: seq: 15, query_adxl345_status oid=1
Sent 95 801522.519099 801522.519099 7: seq: 16, query_adxl345_status oid=1
Sent 96 801522.619961 801522.619961 7: seq: 17, query_adxl345_status oid=1
Sent 97 801522.720682 801522.720682 7: seq: 18, query_adxl345_status oid=1
Sent 98 801522.821274 801522.821274 7: seq: 19, query_adxl345_status oid=1
Sent 99 801522.860989 801522.860989 6: seq: 1a, emergency_stop
Dumping receive queue 100 messages
Receive: 0 801522.554677 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3172 data=b'\x06\xe0\xca\x00\x1f\x00\xfa\xd0\x00\x1f\xec\xfe\xe6\x1f\x1f\xea\xf6\xe0\x1f\x1f\n\xf0\x06 \x1f\x06\xe6\x12 \x1f\x00\xfe\xf0\x00\x1f\xfc\xfe\xd4\x1f\x1f\x06\xe0\xe6\x00\x1f\x00\xee\xfc\x00\x1f'
Receive: 1 801522.558780 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3173 data=b'\x00\xf2\xfa\x00\x1f\xfe\xfe\xee\x1f\x1f\x0e\xe0\xea\x00\x1f\x0e\xe4\xfe\x00\x1f\x1e\xf6\x12 \x1f\x0e\xfe\xfe\x00\x1f\x14\xea\xfe\x00\x1f\x10\xf6\n \x1f\x00\x0e\xd2\x00\x00\x00\x16\x00 \x00'
Receive: 2 801522.561431 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3174 data=b'\x1c\x0e\xe6\x00\x00\x1e\x0e\xee\x00\x00\x16\x16\xee\x00\x00\x1c\x00\x0e \x00\x18\n\x1e \x00\x04\x1e\x10 \x00\x00\x1c$ \x00\x14\x1c\xf2\x00\x00\x00\x16\x00 \x00\x00\x14\xf0\x00\x00'
Receive: 3 801522.564174 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3175 data=b'\x08\x16\x08 \x00\n\x18\xdc\x00\x00\x16\x0c\xfe\x00\x00\x00\x1e\xfa\x00\x00\x0c\x1c\xd0\x00\x00.\x1c\xfe\x00\x00 &( \x00\x1a\x1e\xf2\x00\x00\x0c\x1e\xea\x00\x002\n\n \x00'
Receive: 4 801522.568194 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3176 data=b':<\x00 \x00*&\xf6\x00\x008\x1e\xe8\x00\x00*\x08\xee\x00\x004\x12\xea\x00\x0026\xea\x00\x002@\xd6\x00\x006,\xde\x00\x00:,\xdc\x00\x004.\xb2\x00\x00'
Receive: 5 801522.571178 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3177 data=b'& \xca\x00\x00\xd0>\xb0\x1f\x00\x02,\xc0\x00\x00\x006\xc8\x00\x00\x12 \xee\x00\x00\x14.\xde\x00\x00\xfa\x18\xd2\x1f\x00\xfc>\xaa\x1f\x00\xfe^\xae\x1f\x00\xec \xa6\x1f\x00'
Receive: 6 801522.575076 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3178 data=b'\xeaR\x88\x1f\x00\x1e0\x96\x00\x00\xc8J\x88\x1f\x00\x00\x1c\x90\x00\x00\x0cP\xae\x00\x00\x18\x06\xd2\x00\x00\xe0V\xea\x1f\x00 26 \x00\xa6Z\x16?\x00\xfe>\xfe\x1f\x00'
Receive: 7 801522.577759 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3179 data=b'\x0cD\xe6\x00\x00\xc26\x00?\x00\xd2\x1a(?\x00\xbc\x882?\x00\xee\xae^?\x1f\xec\xbe8?\x00\xea\xf2|?\x1f\xbc\x80Z?\x00\xe0\xfe`?\x1f\xfa\x80,?\x00'
Receive: 8 801522.580499 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3180 data=b'\xde\x00V?\x00\x00<\x10 \x00\xec.\x1e?\x00,:$ \x00\x12@Z \x00\x1e:> \x00\x00^H \x00\x00N0 \x00\x12J\x10 \x00.&* \x00'
Receive: 9 801522.584459 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3181 data=b'\x0c:: \x00\n>\x00 \x004 \xfa\x00\x00\x1c"\x06 \x00$P\x0e \x00\x16 \x0c \x00\x006\xd0\x00\x00\x00\x1e\xb0\x00\x00\x00*\xd4\x00\x00\x0e\x1e\xe4\x00\x00'
Receive: 10 801522.587207 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3182 data=b'\x1a0\xcc\x00\x00\xfe\x1c\xb2\x1f\x00\x0e0\x9a\x00\x00\x0c\x08\xb2\x00\x00\xca\x1e\x9e\x1f\x00\xea\x1a\xa6\x1f\x00\xd6.\xbc\x1f\x00\xe2\x00\xea\x1f\x00\x02.  \x00\xe2:\n?\x00'
Receive: 11 801522.589975 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3183 data=b'\x006\x00 \x00\x12\x16\xfe\x00\x00\x00"\xce\x00\x00\xe6\x16\x86\x1f\x00\x06\xd4\x96\x00\x1f\x00\x0c\xac\x00\x00\x04\xfe\xd2\x00\x1f\x00,\x00 \x00\x00F\x14 \x00\xee6\x0c?\x00'
Receive: 12 801522.594084 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3184 data=b'\x08\x02\x1e \x00\x10\x16\x1e \x00\x00\xfe\x00 \x1f\xf6\xc4\xd6\x1f\x1f`,\xfe\x00\x00\xe4\x06\x10?\x00\xe6.\xe2\x1f\x00\xfe\xd0\xe2\x1f\x1f\n\x10\xae\x00\x00 \x84\x00 \x1f'
Receive: 13 801522.596823 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3185 data=b'$>\xd4\x00\x00\xce\xb0\xcc\x1f\x1f\xfe\xee\xa4\x1f\x1fB\x04\x06 \x00&\xfe\xfa\x00\x1f\x16\xee\x00 \x1f>\x94\xee\x00\x1f\x000\xde\x00\x00\n\xce\xc4\x00\x1f\xfe\xfa\xc4\x1f\x1f'
Receive: 14 801522.599589 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3186 data=b'\x08\xbe\xda\x00\x1f6\xf4\xf4\x00\x1f\x1e\x9e0 \x1f\x0e\xf2. \x1f*\x00D \x00\x0e\xf2" \x1f&\xbc\x00 \x1f\xf8\xd4\n?\x1f"\xba\n \x1f>\xd8" \x1f'
Receive: 15 801522.603861 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3187 data=b'$\xce\x02 \x1fV\xce\xd2\x00\x1f>\xf6\x1e \x1f4\xd8F \x1fF\xd4\x12 \x1f^\xb6\xfe\x00\x1f\x04\xe4\x10 \x1f6\xd4\x10 \x1f\x1e\xe0\x04 \x1f2\xa8\xe6\x00\x1f'
Receive: 16 801522.606266 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3188 data=b'$\xde\xc8\x00\x1f\x1c\x88\xea\x00\x1f\x1a\xae\xfc\x00\x1f"\xd8\xc6\x00\x1f\x1c\xce\xc4\x00\x1f\xfc\xb6\xa8\x1f\x1f\x0c\xc6\xce\x00\x1f\xe8\x9e\xa0\x1f\x1f"\xaa\xc6\x00\x1f\x06\xde\xae\x00\x1f'
Receive: 17 801522.609006 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3189 data=b'\xfe\xd0\xae\x1f\x1f\xfe\xd6\xb6\x1f\x1f\xfe\x8e\xa6\x1f\x1f\x00\xba\xa8\x00\x1f\x00\xa6\xd6\x00\x1f\xe0\xd6\xea\x1f\x1f\x02\xde\xe0\x00\x1f\xe0\xfe\xc8\x1f\x1f\xf2\xe6\xd8\x1f\x1f\x06\xc0\xce\x00\x1f'
Receive: 18 801522.613004 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3190 data=b'\xe0\xcc\xc0\x1f\x1f\n\xc0\xcc\x00\x1f\x00\xea\xc0\x00\x1f\xf6\xea\xd0\x1f\x1f\x0c\xfe\xf4\x00\x1f\x16\xf6  \x1f\x1e\xec4 \x1f\x00\xfe0 \x1f\x12\x06. \x00\x00\nP \x00'
Receive: 19 801522.615782 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3191 data=b'\x02\x0e. \x00\x0e\xea. \x1f\x1a\xeeJ \x1f\x08\x04P \x00\x04\x166 \x00\x00\x14. \x00\x00\x06\x00 \x00\x08\xfa\n \x1f \x02\x0c \x00\x1e\xf4\x1e \x1f'
Receive: 20 801522.618532 801522.519099 60: seq: 17, adxl345_data oid=1 sequence=3192 data=b'&\xf0\x1e \x1f:\x00\x1e \x00.<\n \x00\x16\x00\x16 \x00\x18\x06\x1a \x00\x1e\xf8\xd4\x00\x1f\x1a\xe0\xce\x00\x1f\x12\xe8\xc6\x00\x1f\x0e\x00\xc4\x00\x00\x08\xe0\xde\x00\x1f'
Receive: 21 801522.620216 801522.619961 18: seq: 18, adxl345_status oid=1 clock=626649346 query_ticks=61 next_sequence=3193 buffered=20 fifo=1 limit_count=0
Receive: 22 801522.622557 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3193 data=b'\x00\x0e\xd0\x00\x00\x0e.\xe6\x00\x00\x06\x0e\xca\x00\x00\xfe\xf6\xbe\x1f\x1f\x0c\xe0\xca\x00\x1f\xec\xf2\xca\x1f\x1f\xe2\xf6\xa8\x1f\x1f\xfc\xec\xc2\x1f\x1f\x06\x00\xcc\x00\x00\n\x00\xd6\x00\x00'
Receive: 23 801522.625283 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3194 data=b'\x08\xea\xfa\x00\x1f\x0e\xe4\xfe\x00\x1f\x0e\xde\xee\x00\x1f\x06\xee\xee\x00\x1f\x00\xfa\xfc\x00\x1f\xfa\xfe\xde\x1f\x1f\x08\xe8\xec\x00\x1f\x0e\xd0\xf4\x00\x1f\x06\xfa\xd4\x00\x1f\x16\xfc\xe2\x00\x1f'
Receive: 24 801522.628070 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3195 data=b'\x14\xfe\xf6\x00\x1f\x1e\x00\xd6\x00\x00*\x00\xe6\x00\x00,\xfe\xf6\x00\x1f,\xfa\xfe\x00\x1f.\x00\xfe\x00\x00 \x0e\x10 \x00&\x10\xf6\x00\x00.\x00\xee\x00\x00$\x10\xf6\x00\x00'
Receive: 25 801522.632068 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3196 data=b'\x14\x0e\x10 \x00"\x16\xfe\x00\x00\x0e\x1a\x04 \x00\x0e\x10\x1e \x00&\x16\x1e \x00\x08\x1e( \x00\x08\x16\x16 \x00\n\x00\x1c \x00\x16\x0e\x1e \x00\x1e\n\xee\x00\x00'
Receive: 26 801522.634847 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3197 data=b'\x1e\x1c\xe2\x00\x00\x1e\x1e\xec\x00\x00$\x1e\xf6\x00\x00:\x00\x1e \x00:\x10& \x00>\x12\x12 \x000*\x00 \x00,.\xf6\x00\x00<\x08\xfe\x00\x00\x0e\x1c\xd4\x00\x00'
Receive: 27 801522.638857 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3198 data=b'*\x14\xea\x00\x00* \xec\x00\x000:\xf8\x00\x00\x02:\xc0\x00\x00\n.\xa4\x00\x00\x10&\xb4\x00\x00\x00&\xa8\x00\x00\xf20\xca\x1f\x00\xc8&\xd0\x1f\x00\xf0B\xe0\x1f\x00'
Receive: 28 801522.641593 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3199 data=b'\xd4L\xea\x1f\x00\x0e \xee\x00\x00\xe00\xce\x1f\x00\xda&\xc0\x1f\x00\xeeR\x9c\x1f\x00\xc6\x00\x92\x1f\x00\xe8.\x94\x1f\x00\xfe \x82\x1f\x00\xde\x1ej\x1f\x00\x00\x1a\xb0\x00\x00'
Receive: 29 801522.644453 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3200 data=b'\x0cf\x98\x00\x00\xe0*\xc0\x1f\x00\xf46\xcc\x1f\x00\xd4R\x04?\x00\xce(\x12?\x00\xaa4\xfc\x1f\x00\xf8:\xe0\x1f\x00\xb6\x0e\xe4\x1f\x00\xd8N\xe0\x1f\x00\xd6\xfe(?\x1f'
Receive: 30 801522.648364 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3201 data=b'\xce`&?\x00\xe6Lb?\x00\x1aH~ \x00\xda^r?\x00\xe8@^?\x00\x00>f \x00\x022H \x00\x12d" \x00\x1a\n\x0c \x00&F* \x00'
Receive: 31 801522.651067 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3202 data=b'\x14:t \x00@Nn \x00\x16RD \x00\x0edP \x00\nZN \x00.<T \x00\x006R \x00JB2 \x00:\x16\x12 \x0062\xec\x00\x00'
Receive: 32 801522.653834 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3203 data=b'\x16 \n \x00\x0eH\x1a \x00\xfej\x02?\x00\x04$\x04 \x00\xfc"\x02?\x00\x00&\x00 \x00\xe0.\xe8\x1f\x00\xee>\x8e\x1f\x00\xf2\nv\x1f\x00\xe8.j\x1f\x00'
Receive: 33 801522.657835 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3204 data=b'\xf4\x06\x92\x1f\x00\xc8\xfe\xc6\x1f\x1f\xea\x00\xce\x1f\x00\xea\x1c\xc6\x1f\x00\xce$\xde\x1f\x00\xeaF\xe2\x1f\x00\x12\x0e\x06 \x00\xe6\x0e\xd2\x1f\x00\xea\x00\xd6\x1f\x00\xb0\x02\xb4\x1f\x00'
Receive: 34 801522.660625 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3205 data=b'\xda \xc2\x1f\x00\x14.\xde\x00\x00\xd8\xfe\xc0\x1f\x1f\xec\xfe\xd0\x1f\x1f\x1a\x00\x06 \x00\x0e\x18, \x00\x166\x1a \x00\x12*\xf6\x00\x00\xfe\xe0\xee\x1f\x1f\xfa\xd6\x0e?\x1f'
Receive: 35 801522.663344 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3206 data=b'.\xe6" \x1f\x02\n\x1c \x00\xf6*\xf6\x1f\x00\x0e\x00\xf4\x00\x00\xfe\xe4\x0e?\x1f\x126\xee\x00\x00.\x8a\xf6\x00\x1f>\x82\xbe\x00\x1f\x0et\xd2\x00\x00\x0e\xb8\xde\x00\x1f'
Receive: 36 801522.667351 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3207 data=b'\x12:\x9c\x00\x00V\x96\xda\x00\x1f\x0c\x1c\xde\x00\x00"R\xfe\x00\x1f\x08\xe2\xce\x00\x1f\xf0\xde\xe4\x1f\x1f\x10\x0e\x10 \x00\x1e\xe0\n \x1f\x00\xca\xe0\x00\x1f\xfe\xce\xfa\x1f\x1f'
Receive: 37 801522.670185 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3208 data=b'0\xaa6 \x1f\x1e\xe2. \x1f\x02\xce\x12 \x1f>\xe8\x04 \x1f\x04\xce0 \x1f8\xce\x1e \x1f\x00\xd4\x08 \x1f*\xe6\xfa\x00\x1f.\x98\xf6\x00\x1f$\xde\xc4\x00\x1f'
Receive: 38 801522.672859 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3209 data=b'&\xc6\xf6\x00\x1f6\xa8\x1e \x1f<\xc0* \x1f\x0e\xe6\xec\x00\x1f.\xce\xe4\x00\x1f\x1e\xe2\xbe\x00\x1f\x12\xc2\xba\x00\x1f\x16\x90\xcc\x00\x1f\x1e\xcc\xfa\x00\x1f\x16\xc2\x00 \x1f'
Receive: 39 801522.676866 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3210 data=b'\x00\xde\x00 \x1f\x0e\xe6\xfe\x00\x1f\x06\xd2\xd6\x00\x1f\x06\xb0\xa2\x00\x1f\n\x9a\x9c\x00\x1f\x14\x9e\xae\x00\x1f\x0e\xb2\xae\x00\x1f\x1e\xbe\xc4\x00\x1f\xfe\xdc\xd6\x1f\x1f\xe0\xf6\xe0\x1f\x1f'
Receive: 40 801522.679614 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3211 data=b'\x00\xd2\xd4\x00\x1f\x04\xae\xce\x00\x1f\xfe\xc2\xc0\x1f\x1f\x1a\xbe\xf8\x00\x1f\xfa\xee\xe0\x1f\x1f\xfe\xee\xe4\x1f\x1f\x12\xfe\xf6\x00\x1f\x00\xfe\xf0\x00\x1f\x06\xe4\xdc\x00\x1f\x0e\xc0\xdc\x00\x1f'
Receive: 41 801522.682386 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3212 data=b'\x00\xbe\xc0\x00\x1f$\xd0\xe4\x00\x1f\xfa\x00.?\x00\x00\x1c  \x00\x0e\x0c  \x00\x0e\xfa0 \x1f\xf0\x06V?\x00\x0c\xf0J \x1f\x00\xf6  \x1f\xfe\x06\x0c?\x00'
Receive: 42 801522.686398 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3213 data=b'\x00\xfeJ \x1f\x08\x04B \x00\x04\x066 \x00\xea\x06,?\x00\x00\x14  \x00\x16\x08\xfe\x00\x00\x00\n\xea\x00\x00\x06\xfc\x00 \x1f\x16\x04\x06 \x00\xfe\x04\x16?\x00'
Receive: 43 801522.689190 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3214 data=b'\x00\n\x00 \x00 \x06\xea\x00\x00\x12\x06\xd8\x00\x00\x16\xe8\xd2\x00\x1f\x1c\xee\xc8\x00\x1f\xfe\xfe\xc2\x1f\x1f\x12\x04\xd2\x00\x00\x00\n\xe0\x00\x00\x0e\xf2\xce\x00\x1f\x00\xfe\xa0\x00\x1f'
Receive: 44 801522.691902 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3215 data=b'\xfe\xe0\xaa\x1f\x1f\x0e\xd6\xae\x00\x1f\x0c\xc8\xa6\x00\x1f\xfc\xce\xb8\x1f\x1f\xfe\xe0\xba\x1f\x1f\xfe\xd4\xce\x1f\x1f\xfe\xee\xce\x1f\x1f\x00\xfe\xd2\x00\x1f\xfe\xf2\xf8\x1f\x1f\xfe\xfe\xfa\x1f\x1f'
Receive: 45 801522.695957 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3216 data=b'\n\x04\xe6\x00\x00\xe0\xfe\xd0\x1f\x1f\xe6\xfa\xcc\x1f\x1f\x0e\xfe\xf6\x00\x1f\x0c\xfc\xee\x00\x1f\x16\xd0\xfe\x00\x1f\x16\xee\x0e \x1f\x18\xf6& \x1f\x1a,\x0e \x00* \x0c \x00'
Receive: 46 801522.698977 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3217 data=b'"\x02\x02 \x00*\xe8\xec\x00\x1f2\x02\xf8\x00\x004\x10\xfa\x00\x000\x14\x12 \x00\x106\n \x00\x1e\x08\x0c \x00.\x16\x16 \x00 \x12\x1e \x002\x14\x0e \x00'
Receive: 47 801522.702831 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3218 data=b'\n\x1c\xec\x00\x00\x06\x1e\xfa\x00\x00\x0e\x12& \x00\x1a.\x14 \x00\xf6. ?\x00\x1c\x0e\x0e \x00\x1c\x02\x0e \x00\x08\x00\xdc\x00\x00\x18\x1c\xe0\x00\x00\x18\x16\xfe\x00\x00'
Receive: 48 801522.705541 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3219 data=b'@\x1e\x16 \x0066\xe2\x00\x00,>\xe6\x00\x00,\x10\n \x00B:\x14 \x00&.\x06 \x00.\x10\xee\x00\x00*\x0e\xdc\x00\x00*B\xec\x00\x00:8\xf4\x00\x00'
Receive: 49 801522.708211 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3220 data=b'2\x10\xd6\x00\x00\x1e2\xb2\x00\x00\x1e \xae\x00\x00\xdc:\xb0\x1f\x002\x14\xce\x00\x00\xd6>\xc4\x1f\x00\xc0\x06\xc4\x1f\x006\x18\xfa\x00\x00\xc0:\xc0\x1f\x00\xd8&\xbe\x1f\x00'
Receive: 50 801522.712230 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3221 data=b'"\\\xa2\x00\x00\xb8.\xa6\x1f\x00\xbc(\x90\x1f\x00\xfc ~\x1f\x00\xbe\x00Z\x1f\x00\xfc\n\x8e\x1f\x00\xfe|x\x1f\x00\xde\xfe\xa2\x1f\x1f\xecN\xbe\x1f\x00&:0 \x00'
Receive: 51 801522.714937 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3222 data=b'f\x00*?\x00\xf2h\xfe\x1f\x00\xe6\xe6\x0e?\x1f\xd6h\xe6\x1f\x00\xfe\xca>?\x1f\xbe\x92\x1c?\x00\xe2\xa0l?\x1f0\xaa\x8e \x00\xe0\x1e\xc0?\x00\xa0\x8e"?\x00'
Receive: 52 801522.717703 801522.619961 60: seq: 18, adxl345_data oid=1 sequence=3223 data=b'\xfa\x16J?\x00\xfe\x8a2?\x00\xee b?\x00\x00\x1a\x10 \x00\x0e4\x1e \x00\x0e,^ \x00.fr \x00 ^n \x00\x00^( \x00.D  \x00'
Receive: 53 801522.720907 801522.720682 18: seq: 19, adxl345_status oid=1 clock=627857574 query_ticks=61 next_sequence=3224 buffered=45 fifo=2 limit_count=0
Receive: 54 801522.721723 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3224 data=b'Bd" \x00\x1c\x16P \x00*j\x02 \x00BP\xf2\x00\x00>J\xda\x00\x00\x18\x1a\x12 \x00>b\x18 \x00\x1a>\n \x00\x00f\x00 \x00\xf8F\x00?\x00'
Receive: 55 801522.724476 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3225 data=b'\x16@\x02 \x00\x06*\x0c \x00\xfe0\xcc\x1f\x00\x0e0\xa6\x00\x00\x08>\x9c\x00\x00\x00\x00~\x00\x00\xcc\xfc\x96\x1f\x1f\xde"\xb6\x1f\x00\xca\x1a\xe6\x1f\x00\xc64\xc0\x1f\x00'
Receive: 56 801522.727225 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3226 data=b'\xf2:\xda\x1f\x00\xf6N\x12?\x00\xf4\x10\x08?\x00\xca\x1e\xce\x1f\x00\xf6\x02\xc8\x1f\x00\xf68\xbe\x1f\x00\xea\x00\xba\x1f\x00\xd4\x0e\xb6\x1f\x00\x08\x00\xca\x00\x00\x00\x0e\x00 \x00'
Receive: 57 801522.731243 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3227 data=b'\x1a"\x12 \x00\x0c\x1e\xf8\x00\x00\xfc\x1e\xf6\x1f\x00\xfe\x1e\xee\x1f\x00\xf0\xfc\x00?\x1f\n\xc2, \x1f\x00\xfe\\ \x1f\x00VH \x00\xc0\x0c\x0c?\x00R:\xf4\x00\x00'
Receive: 58 801522.733969 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3228 data=b'\xfa\x02&?\x00\x00\xde\xc0\x00\x1f \x9e\xd0\x00\x1f\x0c\xfa\xd6\x00\x1f\x0c\xfc\x04 \x1f\x16*\xcc\x00\x00\xd0\x04\xe4\x1f\x00\xfa\xf6\xc6\x1f\x1f\x02\xce\xd2\x00\x1f.\x98\xde\x00\x1f'
Receive: 59 801522.736760 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3229 data=b'&\xf2\xd4\x00\x1f \xb4\xc8\x00\x1f*\xdc\xde\x00\x1f\x16\xf4\x02 \x1f\x1c\xec\xe4\x00\x1f\x1c\x96\xea\x00\x1f(\xc6\x1e \x1f\x1c\xda\x16 \x1f\x16\xb0\x12 \x1f\xf2\xd6\xee\x1f\x1f'
Receive: 60 801522.740781 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3230 data=b'\x16\xd6\xe0\x00\x1f\x0c\xa0\xee\x00\x1f\x10\xbe\x14 \x1f\xd2\xbe\x1e?\x1f@\xae\xe4\x00\x1f\x00\xde\xd6\x00\x1f*\xa4\xfa\x00\x1f\x16\xf62 \x1f4\xa0& \x1f*\xc8\xda\x00\x1f'
Receive: 61 801522.743514 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3231 data=b'R\xb2\xf8\x00\x1f*\xca\xc2\x00\x1f\x1a\xa0\xd6\x00\x1f:\xa8\xf4\x00\x1f\x12\xe2\xf6\x00\x1fB\xda\xfe\x00\x1f\x0e\xc0\x16 \x1f\x16\xd0\xf6\x00\x1f\x10\xca\xd8\x00\x1f\x0c\xd6\xa0\x00\x1f'
Receive: 62 801522.746243 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3232 data=b'\x1a\xa0\x8e\x00\x1f\x18\x9e\x9e\x00\x1f \xb6\xb8\x00\x1f\x02\xce\xda\x00\x1f\x00\x06\xd0\x00\x00\n\xee\xec\x00\x1f\x14\xfe\xec\x00\x1f\x04\xd2\xda\x00\x1f\x00\xda\xc0\x00\x1f\x00\xc2\xf0\x00\x1f'
Receive: 63 801522.750300 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3233 data=b'\xf4\xf6\xde\x1f\x1f\n\xe0\xda\x00\x1f\x00\xf6\xe8\x00\x1f\xe6\x06\xe6\x1f\x00\xfa\xf8\x00?\x1f\x06\xde\xe8\x00\x1f\x00\xda\xd0\x00\x1f\xfe\xfe\xe0\x1f\x1f\xfe\x04\xfa\x1f\x00\x14\x06\n \x00'
Receive: 64 801522.753008 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3234 data=b'&\x00\x1a \x00\x04\xf4\x10 \x1f\n\xfe\x1e \x1f\x06\x06: \x00\xfc\x00F?\x00\xfe*$?\x00\xfe\x10\x14?\x00\x06\x00& \x00\xfe\xfe(?\x1f\n\x006 \x00'
Receive: 65 801522.755761 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3235 data=b'\x0c\x00\x16 \x00\xf6\x16\xf0\x1f\x00\x06\n\x14 \x00\x00\x02  \x00\x00\xf6\x10 \x1f\x00\xfe\xf8\x00\x1f\x1e\xec\xfe\x00\x1f\x00\x16\xf8\x00\x00\x00\x1a\xfe\x00\x00\x1e\x00\xe6\x00\x00'
Receive: 66 801522.759826 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3236 data=b'$\xe6\xda\x00\x1f\x1c\xf6\xbe\x00\x1f\x0e\xe4\xce\x00\x1f\x0c\xfa\xb0\x00\x1f\x16\x06\xc6\x00\x00\x06\x10\xc6\x00\x00\x06\x0e\xc4\x00\x00\n\xca\xbc\x00\x1f\xe6\xde\xa0\x1f\x1f\x00\xdc\xc6\x00\x1f'
Receive: 67 801522.762551 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3237 data=b'\x04\xd2\xca\x00\x1f\x00\xee\xbe\x00\x1f\xf2\xf2\xc0\x1f\x1f\xe0\xfe\xd8\x1f\x1f\n\x06\x02 \x00\x00\xee  \x1f\n\xd4\x06 \x1f\n\xe6\xee\x00\x1f\xf2\xfc\xd0\x1f\x1f\x14\xec\xee\x00\x1f'
Receive: 68 801522.766551 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3238 data=b'\x06\xf0\xde\x00\x1f\xfc\xee\xf0\x1f\x1f\x1a\xe0\xfe\x00\x1f\x00\x04\x00 \x00\xfc\x1e\x1e?\x00\x0c\x12\xf6\x00\x00.\x04\xfe\x00\x00\x1a\x04\x00 \x00\x00\x06\xf0\x00\x000\xfe\x00 \x1f'
Receive: 69 801522.769324 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3239 data=b'&\n\xde\x00\x006\x14\xf2\x00\x00& \xfe\x00\x00\x1e \x06 \x00\x18\x00\x1e \x00* \x16 \x00\x1a&\x00 \x00\x00\x1e\xee\x00\x00\x00\x1e\x10 \x00&4\x02 \x00'
Receive: 70 801522.772140 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3240 data=b'\x0e\n\x0e \x00\x1e*\x16 \x00&\x00\n \x0024\x14 \x00\x14&\x00 \x0040\n \x00\x10\x14\x00 \x002,\x02 \x000*\xfe\x00\x00J8\x06 \x00'
Receive: 71 801522.776859 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3241 data=b'\x14,\x00 \x00*\x16\x06 \x00*4\xf4\x00\x00<2\xe4\x00\x002"\xce\x00\x00. \xbe\x00\x0046\xb2\x00\x00,\x10\xc6\x00\x006\x1e\xbe\x00\x00*<\xac\x00\x00'
Receive: 72 801522.779367 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3242 data=b'&@\xd2\x00\x00\x1e*\xf2\x00\x00&Z\xfa\x00\x00\xde:\xe2\x1f\x00V(\xdc\x00\x00\xc0V\xd0\x1f\x00\x1e$\xce\x00\x00\x00n\xb4\x00\x00\xe0\x0e\xb0\x1f\x00\xfc@\x8a\x1f\x00'
Receive: 73 801522.781670 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3243 data=b'\x16Z\x8e\x00\x00\xde2\x92\x1f\x00\xdcH\x9a\x1f\x00\x0e^\x9e\x00\x00\xc8*v\x1f\x00\xf4\x12\x8c\x1f\x00\xfeZ\xae\x1f\x00\xec\xe8\xd4\x1f\x1f\xc0V\xf6\x1f\x00\xe0D(?\x00'
Receive: 74 801522.785650 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3244 data=b'j \xf6\x1f\x00\xe8f\xd6\x1f\x00\x9c\xec\xe8\x1f\x1f\xb2R\xe8\x1f\x00\xea\xc06?\x1f\xae\x88\xfe\x1f\x00\xce\xc6z?\x1f\x1e\x9ef \x00\n\x14\xb2 \x00\xc6@^?\x00'
Receive: 75 801522.788301 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3245 data=b'\xea.X?\x00\xfeZF?\x00\xf2d>?\x00\xee\xee,?\x1f\x120. \x00&\x16t \x00&@r \x00\x1e R \x00@N@ \x00$DL \x00'
Receive: 76 801522.791157 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3246 data=b'"JD \x00\x12\x1eL \x00\x14`> \x00:\x1e\x1a \x004(\xfe\x00\x00\xfa\x10\x14?\x00@:\x00 \x00\x1a \xee\x00\x00\x06$\xbc\x00\x00 (\xc6\x00\x00'
Receive: 77 801522.795217 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3247 data=b'\xc2&\xa0\x1f\x00\xfc\x06\xc0\x1f\x00\x12>\x9e\x00\x00\xe4\x0c\xc8\x1f\x00\xe0&\xa8\x1f\x00\xf0\x00\xce\x1f\x00\xd6*\xc6\x1f\x00\xea\x16\xae\x1f\x00\xde.\x9e\x1f\x00\xe6\x18\xc6\x1f\x00'
Receive: 78 801522.797847 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3248 data=b'\xfe\xfe\x1e?\x1f\x006P \x00\n44 \x00\xfa \xce\x1f\x00\xec0~\x1f\x00\xec\xea\x8a\x1f\x1f\x00\xce\x80\x00\x1f\xf6\xbe\xaa\x1f\x1f$\xc6\xee\x00\x1f\x1cZ\xfe\x00\x00'
Receive: 79 801522.800592 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3249 data=b'\xec F?\x00~nb \x00\xd6\x14.?\x00\xfe\xf6\xb0\x1f\x1f2\x9c\x9e\x00\x1f\xe0\nX\x1f\x00\x0c\x80\x9e\x00\x1f>\xfe\xa8\x00\x1f\xc0\x0e\xc0\x1f\x00\xe4\xce\xde\x1f\x1f'
Receive: 80 801522.804590 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3250 data=b'\n\xfe\x12 \x1f,\xa66 \x1f\xfe\x00\xe2\x1f\x00\x06\x94\xf2\x00\x1f\x00:\xb4\x00\x00\x1c\xc0\xfa\x00\x1f\x18\xdc\xa8\x00\x1f&\x90\xfe\x00\x1f\x80\xda\x00 \x1f\x04\xe6\x06 \x1f'
Receive: 81 801522.807325 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3251 data=b'b\xd6< \x1f02p \x00Z\xd4N \x1fV\xaaP \x1f$\xeeL \x1fB\xe4N \x1fT\xcc\x0c \x1f\x1c\xb6\xd0\x00\x1f&\xae\x00 \x1f0\xd6  \x1f'
Receive: 82 801522.810086 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3252 data=b'\xfe\xaa\x1e?\x1f.\xc0\x1e \x1f^\xa8. \x1f\x0e\xc0< \x1f \xb24 \x1f\x10\xbe\x16 \x1f\x00\xb2\xc0\x00\x1f(\xac\xda\x00\x1f\xf2\xb0\xde\x1f\x1f\xf2\xbe\xf0\x1f\x1f'
Receive: 83 801522.814114 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3253 data=b'\xfe\xc0\xf2\x1f\x1f\xd0\xda\xc0\x1f\x1f\xe0\xae\xc0\x1f\x1f\xd0\xc6\xca\x1f\x1f\xfa\xa0\xb6\x1f\x1f\xdc\xae\xa4\x1f\x1f\xe0\xae\x94\x1f\x1f\xf6\xaa~\x1f\x1f\xe8\xc2\x94\x1f\x1f\xe6\xc2\x96\x1f\x1f'
Receive: 84 801522.816880 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3254 data=b'\xf6\xde\xb0\x1f\x1f\xfa\xcc\xba\x1f\x1f\xea\xc0\xc2\x1f\x1f\x0c\xc6\xd2\x00\x1f\xfa\xe8\xb4\x1f\x1f\xfc\xbe\xbe\x1f\x1f\x18\xde\xc0\x00\x1f\x00\xde\xd4\x00\x1f\x00\xe6\xe0\x00\x1f \xfe\x10 \x1f'
Receive: 85 801522.819615 801522.720682 60: seq: 19, adxl345_data oid=1 sequence=3255 data=b'\x00\x06\x10 \x00\x1a>\x0e \x00:\xfe\xee\x00\x1f\n\xe4\xce\x00\x1f2\xd0\xea\x00\x1f6\xd8\xfe\x00\x1f\x14\xd2\x0e \x1f\x10.@ \x00"2N \x00\x1e*~ \x00'
Receive: 86 801522.821486 801522.821274 18: seq: 1a, adxl345_status oid=1 clock=629064629 query_ticks=61 next_sequence=3256 buffered=20 fifo=2 limit_count=0
Receive: 87 801522.823633 801522.821274 60: seq: 1a, adxl345_data oid=1 sequence=3256 data=b'\x0c\x02\x8c \x00\x02\x1eX \x00\x14\xea: \x1f\x16\x00\x14 \x00\x14\x00\n \x00,\x00\x1e \x00\x08\xfe8 \x1f\x00\x16> \x00\x14\x120 \x00\x1c\x1a\x00 \x00'
Receive: 88 801522.826379 801522.821274 60: seq: 1a, adxl345_data oid=1 sequence=3257 data=b'\n\x1a\x06 \x00\x1e\x1a\x00 \x00\x14\xfe\x00 \x1f\x06\x0e\xce\x00\x00\x08\n\xc0\x00\x00\x1a\xfe\xc2\x00\x1f\x00\xee\xae\x00\x1f\x06\xe0\xc6\x00\x1f\xf2\xf2\xba\x1f\x1f\x00\xfc\xc0\x00\x1f'
Receive: 89 801522.829227 801522.821274 60: seq: 1a, adxl345_data oid=1 sequence=3258 data=b'\xec\xfe\xcc\x1f\x1f\xf6\x12\xee\x1f\x00\xfe\x12\xfa\x1f\x00\xfe\x00\xda\x1f\x00\x06\xee\xce\x00\x1f\x00\xe6\x98\x00\x1f\x18\xdc\xda\x00\x1f\x00\xe6\xd6\x00\x1f\xe8\xfc\xb6\x1f\x1f\xe0\x0e\xd8\x1f\x00'
Receive: 90 801522.833305 801522.821274 60: seq: 1a, adxl345_data oid=1 sequence=3259 data=b'\xd4\x16\x00?\x00\xf4\xfe\xe2\x1f\x1f\x04\x0c\xe8\x00\x00\xf0\xf2\xd6\x1f\x1f\x00\xfe\xd6\x00\x1f\x00\xfe\xc2\x00\x1f\x12\x08\xda\x00\x00\x0c\x1c\xc2\x00\x00\x12\x14\xb8\x00\x00(\xe6\xca\x00\x1f'
Receive: 91 801522.838637 801522.821274 60: seq: 1a, adxl345_data oid=1 sequence=3260 data=b'\x00\xfe\xf0\x00\x1f>\x00\xf6\x00\x00:\x16\x06 \x00 .\xfe\x00\x006\x0e\xf6\x00\x00.\x00\xfe\x00\x00&\x00\xf2\x00\x00J\x0c6 \x00>\x00& \x006*$ \x00'
Receive: 92 801522.842404 801522.821274 60: seq: 1a, adxl345_data oid=1 sequence=3261 data=b'"\x10> \x00\xfe\x1eF?\x00\x08\x1c\x04 \x00\x06\x1e\xee\x00\x00\n\x00\n \x00>\x00\n \x00\xfe\x02\xfe\x1f\x00\xfe\x12\x18?\x00&D\x00 \x00\x0c6  \x00'
Receive: 93 801522.843043 801522.821274 60: seq: 1a, adxl345_data oid=1 sequence=3262 data=b'82\x00 \x00^\x06\xf6\x00\x00\x10\xfe\xe8\x00\x1f.\x1e\x00 \x00H6\x10 \x00(.\x1e \x00 L\x00 \x00"F\x0c \x006>\x00 \x00 8\x00 \x00'
Receive: 94 801522.847417 801522.821274 60: seq: 1a, adxl345_data oid=1 sequence=3263 data=b'\n*\xc0\x00\x00\xb82\xb4\x1f\x00n\x00\xa6\x00\x00\x84f\x90\x1f\x00\xfe\xf0\xc2\x1f\x1f\xfe \xc6\x1f\x00\xd6\xf6\xca\x1f\x1f\xc6L\xd6\x1f\x00\xeaX\xce\x1f\x00\xb2\x1e\xbe\x1f\x00'
Receive: 95 801522.849650 801522.821274 60: seq: 1a, adxl345_data oid=1 sequence=3264 data=b'\xdc\x18\xb4\x1f\x00\xd8V\x90\x1f\x00\xb6\xfa@\x1f\x1f\xc0\xf2.\x1f\x1f\xe4f|\x1f\x00\xfe.\xb6\x1f\x00\x14V\xca\x00\x00\xf2\x1a\x16?\x00\x1en\x1a \x00\x88& ?\x00'
Receive: 96 801522.852566 801522.821274 60: seq: 1a, adxl345_data oid=1 sequence=3265 data=b'\x1cr\x02 \x00\x06*\xde\x00\x00\xe6 \xca\x1f\x00\xee8\xfe\x1f\x00\xceb\x14?\x00\xe2\x12V?\x002\x84\x82 \x00\x14F\xc2 \x00\xa0\xaap?\x00\n\x14B \x00'
Receive: 97 801522.857133 801522.821274 60: seq: 1a, adxl345_data oid=1 sequence=3266 data=b'\x0c\x806 \x00\xd8&0?\x00\x1e\x00\xfe\x00\x006\xf2\x1e \x1f\x08N@ \x00\x00n` \x00*xn \x00(jP \x006N6 \x00.8* \x00'
Receive: 98 801522.859119 801522.821274 60: seq: 1a, adxl345_data oid=1 sequence=3267 data=b'(\x0c\x12 \x00\x00J\x04 \x008F\x0e \x00:0\xfe\x00\x00\xde&\x0e?\x00"JF \x00\n@^ \x00\xdaj\x10?\x00\xfa\x16\n?\x00\xee2\xf6\x1f\x00'
Receive: 99 801522.861540 801522.860989 12: seq: 1b, shutdown clock=629542090 static_string_id=Command request
Dumping trapq 'toolhead' 23 moves:
move 0: pt=44.942309 mt=0.017028 sv=18.750000 a=-1101.098087 sp=(150.000000,150.000000,20.000000) ar=(0.000000,1.000000,0.000000)
move 1: pt=44.959337 mt=0.017028 sv=0.000000 a=1101.098087 sp=(150.000000,150.159642,20.000000) ar=(0.000000,-1.000000,0.000000)
move 2: pt=44.976366 mt=0.000000 sv=18.750000 a=0.000000 sp=(150.000000,150.000000,20.000000) ar=(0.000000,-1.000000,0.000000)
move 3: pt=44.976366 mt=0.000000 sv=18.750000 a=0.000000 sp=(150.000000,150.000000,20.000000) ar=(0.000000,-1.000000,0.000000)
move 4: pt=44.976366 mt=0.016989 sv=18.750000 a=-1103.652355 sp=(150.000000,150.000000,20.000000) ar=(0.000000,-1.000000,0.000000)
move 5: pt=44.993355 mt=0.016989 sv=0.000000 a=1103.652355 sp=(150.000000,149.840728,20.000000) ar=(0.000000,1.000000,0.000000)
move 6: pt=45.010344 mt=-0.000000 sv=18.750000 a=0.000000 sp=(150.000000,150.000000,20.000000) ar=(0.000000,1.000000,0.000000)
move 7: pt=45.010344 mt=0.000000 sv=18.750000 a=-1103.652355 sp=(150.000000,150.000000,20.000000) ar=(0.000000,1.000000,0.000000)
move 8: pt=45.010344 mt=0.000000 sv=18.750000 a=0.000000 sp=(150.000000,150.000000,20.000000) ar=(0.000000,1.000000,0.000000)
move 9: pt=45.010344 mt=0.016950 sv=18.750000 a=-1106.200712 sp=(150.000000,150.000000,20.000000) ar=(0.000000,1.000000,0.000000)
move 10: pt=45.027294 mt=0.016950 sv=0.000000 a=1106.200712 sp=(150.000000,150.158905,20.000000) ar=(0.000000,-1.000000,0.000000)
move 11: pt=45.044244 mt=-0.000000 sv=18.750000 a=0.000000 sp=(150.000000,150.000000,20.000000) ar=(0.000000,-1.000000,0.000000)
move 12: pt=45.044244 mt=0.000000 sv=18.750000 a=-1106.200712 sp=(150.000000,150.000000,20.000000) ar=(0.000000,-1.000000,0.000000)
move 13: pt=45.044244 mt=0.016911 sv=18.750000 a=-1108.743198 sp=(150.000000,150.000000,20.000000) ar=(0.000000,-1.000000,0.000000)
move 14: pt=45.061155 mt=0.016911 sv=0.000000 a=1108.743198 sp=(150.000000,149.841459,20.000000) ar=(0.000000,1.000000,0.000000)
move 15: pt=45.078066 mt=0.000000 sv=18.750000 a=1111.279854 sp=(150.000000,150.000000,20.000000) ar=(0.000000,1.000000,0.000000)
move 16: pt=45.078066 mt=0.000000 sv=18.750000 a=0.000000 sp=(150.000000,150.000000,20.000000) ar=(0.000000,1.000000,0.000000)
move 17: pt=45.078066 mt=0.016872 sv=18.750000 a=-1111.279854 sp=(150.000000,150.000000,20.000000) ar=(0.000000,1.000000,0.000000)
move 18: pt=45.094938 mt=0.016872 sv=0.000000 a=1111.279854 sp=(150.000000,150.158179,20.000000) ar=(0.000000,-1.000000,0.000000)
move 19: pt=45.111811 mt=0.000000 sv=18.750000 a=1113.810720 sp=(150.000000,150.000000,20.000000) ar=(0.000000,-1.000000,0.000000)
move 20: pt=45.111811 mt=0.000000 sv=18.750000 a=0.000000 sp=(150.000000,150.000000,20.000000) ar=(0.000000,-1.000000,0.000000)
move 21: pt=45.111811 mt=0.016834 sv=18.750000 a=-1113.810720 sp=(150.000000,150.000000,20.000000) ar=(0.000000,-1.000000,0.000000)
move 22: pt=45.128645 mt=0.016834 sv=0.000000 a=1113.810720 sp=(150.000000,149.842180,20.000000) ar=(0.000000,1.000000,0.000000)
Requested toolhead position at shutdown time 45.044623: (150.0, 149.9929773814953, 20.0)
MCU 'mcu' shutdown: Command request
clocksync state: mcu_freq=120000000 last_clock=5299983884 clock_est=(801499.958 2657411896 119993287.548) min_half_rtt=0.000071 min_rtt_time=801480.800 time_avg=801499.958(233.955) clock_avg=2657411896.637(28072981568.730) pred_variance=3141433825.180
Dumping serial stats: bytes_write=41780 bytes_read=23297 bytes_retransmit=9 bytes_invalid=0 send_seq=1328 receive_seq=1328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 801521.197449 801521.197449 62: seq: 1c, queue_step oid=10 interval=237548 count=1 add=0, queue_step oid=10 interval=178283 count=3 add=-23225, queue_step oid=10 interval=120273 count=5 add=-7697, queue_step oid=10 interval=86725 count=4 add=-2070, queue_step oid=10 interval=87359 count=5 add=5576, queue_step oid=10 interval=120947 count=3 add=15152, queue_step oid=10 interval=183377 count=1 add=0
Sent 1 801521.197449 801521.197449 63: seq: 1d, queue_step oid=10 interval=239703 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=1087771 count=1 add=0, queue_step oid=10 interval=239703 count=1 add=0, queue_step oid=10 interval=179114 count=3 add=-23601, queue_step oid=10 interval=120595 count=5 add=-7818, queue_step oid=10 interval=87512 count=3 add=-2768, queue_step oid=10 interval=81010 count=6 add=5854
Sent 2 801521.197449 801521.197449 63: seq: 1e, queue_step oid=10 interval=120622 count=3 add=15747, queue_step oid=10 interval=183812 count=1 add=0, queue_step oid=10 interval=241915 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=1070534 count=1 add=0, queue_step oid=10 interval=241915 count=1 add=0, queue_step oid=10 interval=179957 count=3 add=-23986, queue_step oid=10 interval=120873 count=5 add=-7909
Sent 3 801521.197449 801521.197449 61: seq: 1f, queue_step oid=10 interval=87751 count=3 add=-2943, queue_step oid=10 interval=81014 count=6 add=5871, queue_step oid=10 interval=120820 count=3 add=15820, queue_step oid=10 interval=184781 count=1 add=0, queue_step oid=10 interval=244189 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=1053202 count=1 add=0, queue_step oid=10 interval=244188 count=1 add=0
Sent 4 801521.197449 801521.197449 62: seq: 10, queue_step oid=10 interval=180805 count=3 add=-24368, queue_step oid=10 interval=121218 count=4 add=-8070, queue_step oid=10 interval=89776 count=4 add=-2532, queue_step oid=10 interval=81017 count=6 add=5888, queue_step oid=10 interval=121023 count=3 add=15888, queue_step oid=10 interval=185770 count=1 add=0, queue_step oid=10 interval=246526 count=1 add=0
Sent 5 801521.197449 801521.197449 56: seq: 11, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=1035767 count=1 add=0, queue_step oid=10 interval=246527 count=1 add=0, queue_step oid=10 interval=181660 count=3 add=-24752, queue_step oid=10 interval=121665 count=4 add=-8333, queue_step oid=10 interval=90302 count=4 add=-2807, queue_step oid=10 interval=81020 count=6 add=5905
Sent 6 801521.197449 801521.197449 63: seq: 12, queue_step oid=10 interval=121225 count=3 add=15960, queue_step oid=10 interval=186765 count=1 add=0, queue_step oid=10 interval=248932 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=1018222 count=1 add=0, queue_step oid=10 interval=248932 count=1 add=0, queue_step oid=10 interval=182420 count=3 add=-24930, queue_step oid=10 interval=121710 count=4 add=-8299
Sent 7 801521.197449 801521.197449 61: seq: 13, queue_step oid=10 interval=90213 count=4 add=-2754, queue_step oid=10 interval=81024 count=6 add=5922, queue_step oid=10 interval=121424 count=3 add=16034, queue_step oid=10 interval=187773 count=1 add=0, queue_step oid=10 interval=251409 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=1000558 count=1 add=0, queue_step oid=10 interval=251409 count=1 add=0
Sent 8 801521.197449 801521.197449 62: seq: 14, queue_step oid=10 interval=183303 count=3 add=-25340, queue_step oid=10 interval=122088 count=4 add=-8485, queue_step oid=10 interval=90537 count=4 add=-2921, queue_step oid=10 interval=81027 count=6 add=5939, queue_step oid=10 interval=121628 count=3 add=16105, queue_step oid=10 interval=188798 count=1 add=0, queue_step oid=10 interval=253961 count=1 add=0
Sent 9 801521.197449 801521.197449 56: seq: 15, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=982766 count=1 add=0, queue_step oid=10 interval=253961 count=1 add=0, queue_step oid=10 interval=185067 count=2 add=-27499, queue_step oid=10 interval=132868 count=5 add=-9566, queue_step oid=10 interval=92306 count=4 add=-3744, queue_step oid=10 interval=81031 count=6 add=5956
Sent 10 801521.197449 801521.197449 63: seq: 16, queue_step oid=10 interval=121828 count=3 add=16182, queue_step oid=10 interval=189828 count=1 add=0, queue_step oid=10 interval=256593 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=964837 count=1 add=0, queue_step oid=10 interval=256593 count=1 add=0, queue_step oid=10 interval=185928 count=2 add=-27836, queue_step oid=10 interval=133155 count=5 add=-9650
Sent 11 801521.197449 801521.197449 61: seq: 17, queue_step oid=10 interval=92517 count=4 add=-3858, queue_step oid=10 interval=81036 count=6 add=5972, queue_step oid=10 interval=122037 count=3 add=16250, queue_step oid=10 interval=190883 count=1 add=0, queue_step oid=10 interval=259309 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=946759 count=1 add=0, queue_step oid=10 interval=259308 count=1 add=0
Sent 12 801521.197796 801521.197796 62: seq: 18, queue_step oid=10 interval=186103 count=2 add=-26785, queue_step oid=10 interval=133443 count=4 add=-9734, queue_step oid=10 interval=95765 count=5 add=-3724, queue_step oid=10 interval=81039 count=6 add=5989, queue_step oid=10 interval=122241 count=3 add=16325, queue_step oid=10 interval=191945 count=1 add=0, queue_step oid=10 interval=262113 count=1 add=0
Sent 13 801521.197796 801521.197796 56: seq: 19, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=928523 count=1 add=0, queue_step oid=10 interval=262112 count=1 add=0, queue_step oid=10 interval=187684 count=2 add=-28531, queue_step oid=10 interval=133734 count=4 add=-9820, queue_step oid=10 interval=95815 count=5 add=-3738, queue_step oid=10 interval=81042 count=6 add=6006
Sent 14 801521.197967 801521.197967 63: seq: 1a, queue_step oid=10 interval=122448 count=3 add=16397, queue_step oid=10 interval=193027 count=1 add=0, queue_step oid=10 interval=265012 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=910113 count=1 add=0, queue_step oid=10 interval=265012 count=1 add=0, queue_step oid=10 interval=187961 count=2 add=-27654, queue_step oid=10 interval=133973 count=4 add=-9871
Sent 15 801521.198046 801521.198046 61: seq: 1b, queue_step oid=10 interval=95865 count=5 add=-3752, queue_step oid=10 interval=81046 count=6 add=6023, queue_step oid=10 interval=122649 count=3 add=16478, queue_step oid=10 interval=194111 count=1 add=0, queue_step oid=10 interval=268012 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=891519 count=1 add=0, queue_step oid=10 interval=268012 count=1 add=0
Sent 16 801521.198108 801521.198108 62: seq: 1c, queue_step oid=10 interval=188909 count=2 add=-28101, queue_step oid=10 interval=134303 count=4 add=-9992, queue_step oid=10 interval=95237 count=5 add=-3421, queue_step oid=10 interval=81049 count=6 add=6040, queue_step oid=10 interval=122853 count=3 add=16556, queue_step oid=10 interval=195216 count=1 add=0, queue_step oid=10 interval=271119 count=1 add=0
Sent 17 801521.198169 801521.198169 56: seq: 1d, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=872726 count=1 add=0, queue_step oid=10 interval=271119 count=1 add=0, queue_step oid=10 interval=190402 count=2 add=-29623, queue_step oid=10 interval=134582 count=4 add=-10079, queue_step oid=10 interval=95333 count=5 add=-3452, queue_step oid=10 interval=81052 count=6 add=6057
Sent 18 801521.198247 801521.198247 63: seq: 1e, queue_step oid=10 interval=123060 count=3 add=16632, queue_step oid=10 interval=196339 count=1 add=0, queue_step oid=10 interval=274341 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=853716 count=1 add=0, queue_step oid=10 interval=274341 count=1 add=0, queue_step oid=10 interval=191332 count=2 add=-30002, queue_step oid=10 interval=134863 count=4 add=-10167
Sent 19 801521.275206 801521.275206 22: seq: 1f, tmcuart_send oid=2 write=b'\xea\x03\xe8\xad\xe1' read=10, queue_step oid=10 interval=95427 count=5 add=-3482
Sent 20 801521.280061 801521.280061 14: seq: 10, tmcuart_send oid=3 write=b'\xea\x03\xe8\xad\xe1' read=10
Sent 21 801521.285445 801521.285445 14: seq: 11, tmcuart_send oid=2 write=b'\xea\x03( \xc3' read=10
Sent 22 801521.290263 801521.290263 14: seq: 12, tmcuart_send oid=3 write=b'\xea\x03( \xc3' read=10
Sent 23 801521.673695 801521.673695 62: seq: 13, queue_step oid=10 interval=81053 count=6 add=6075, queue_step oid=10 interval=123265 count=3 add=16711, queue_step oid=10 interval=197475 count=1 add=0, queue_step oid=10 interval=277685 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=834474 count=1 add=0, queue_step oid=10 interval=277685 count=1 add=0, queue_step oid=10 interval=192276 count=2 add=-30389
Sent 24 801521.673695 801521.673695 63: seq: 14, queue_step oid=10 interval=135143 count=4 add=-10254, queue_step oid=10 interval=95522 count=5 add=-3513, queue_step oid=10 interval=81058 count=6 add=6091, queue_step oid=10 interval=123478 count=3 add=16784, queue_step oid=10 interval=198633 count=1 add=0, queue_step oid=10 interval=281162 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=814978 count=1 add=0
Sent 25 801521.673695 801521.673695 62: seq: 15, queue_step oid=10 interval=281162 count=1 add=0, queue_step oid=10 interval=193231 count=2 add=-30784, queue_step oid=10 interval=135427 count=4 add=-10344, queue_step oid=10 interval=95623 count=5 add=-3546, queue_step oid=10 interval=81069 count=6 add=6104, queue_step oid=10 interval=123698 count=3 add=16850, queue_step oid=10 interval=199816 count=1 add=0
Sent 26 801521.673695 801521.673695 63: seq: 16, queue_step oid=10 interval=284780 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=795209 count=1 add=0, queue_step oid=10 interval=284780 count=1 add=0, queue_step oid=10 interval=194200 count=2 add=-31187, queue_step oid=10 interval=135711 count=4 add=-10434, queue_step oid=10 interval=95680 count=5 add=-3557, queue_step oid=10 interval=81070 count=6 add=6122
Sent 27 801521.673695 801521.673695 63: seq: 17, queue_step oid=10 interval=123104 count=3 add=18530, queue_step oid=10 interval=198606 count=1 add=0, queue_step oid=10 interval=288550 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=775142 count=1 add=0, queue_step oid=10 interval=288551 count=1 add=0, queue_step oid=10 interval=195183 count=2 add=-31598, queue_step oid=10 interval=135995 count=4 add=-10523
Sent 28 801521.673695 801521.673695 61: seq: 18, queue_step oid=10 interval=95825 count=5 add=-3613, queue_step oid=10 interval=81074 count=6 add=6139, queue_step oid=10 interval=123289 count=3 add=18657, queue_step oid=10 interval=199739 count=1 add=0, queue_step oid=10 interval=292486 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=754752 count=1 add=0, queue_step oid=10 interval=292486 count=1 add=0
Sent 29 801521.673695 801521.673695 62: seq: 19, queue_step oid=10 interval=196180 count=2 add=-32019, queue_step oid=10 interval=136281 count=4 add=-10614, queue_step oid=10 interval=95981 count=5 add=-3673, queue_step oid=10 interval=81076 count=6 add=6156, queue_step oid=10 interval=123477 count=3 add=18783, queue_step oid=10 interval=200892 count=1 add=0, queue_step oid=10 interval=296602 count=1 add=0
Sent 30 801521.673695 801521.673695 56: seq: 1a, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=734007 count=1 add=0, queue_step oid=10 interval=296601 count=1 add=0, queue_step oid=10 interval=197191 count=2 add=-32447, queue_step oid=10 interval=136568 count=4 add=-10705, queue_step oid=10 interval=96133 count=5 add=-3732, queue_step oid=10 interval=81792 count=6 add=5814
Sent 31 801521.673695 801521.673695 61: seq: 1b, queue_step oid=10 interval=124734 count=3 add=17881, queue_step oid=10 interval=203051 count=1 add=0, queue_step oid=10 interval=300913 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=712875 count=1 add=0, queue_step oid=10 interval=300913 count=1 add=0, queue_step oid=10 interval=201236 count=1 add=0, queue_step oid=10 interval=159398 count=3 add=-17114
Sent 32 801521.673695 801521.673695 62: seq: 1c, queue_step oid=10 interval=110722 count=6 add=-5645, queue_step oid=10 interval=79019 count=6 add=4903, queue_step oid=10 interval=112390 count=3 add=14408, queue_step oid=10 interval=162830 count=1 add=0, queue_step oid=10 interval=202352 count=1 add=0, queue_step oid=10 interval=305438 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=691315 count=1 add=0
Sent 33 801521.673695 801521.673695 61: seq: 1d, queue_step oid=10 interval=305439 count=1 add=0, queue_step oid=10 interval=202351 count=1 add=0, queue_step oid=10 interval=159910 count=3 add=-17295, queue_step oid=10 interval=110833 count=6 add=-5671, queue_step oid=10 interval=79043 count=6 add=4905, queue_step oid=10 interval=112539 count=3 add=14470, queue_step oid=10 interval=163352 count=1 add=0
Sent 34 801521.673695 801521.673695 61: seq: 1e, queue_step oid=10 interval=203484 count=1 add=0, queue_step oid=10 interval=310199 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=669286 count=1 add=0, queue_step oid=10 interval=310199 count=1 add=0, queue_step oid=10 interval=203484 count=1 add=0, queue_step oid=10 interval=160425 count=3 add=-17477, queue_step oid=10 interval=110946 count=6 add=-5698
Sent 35 801521.674298 801521.674298 60: seq: 1f, queue_step oid=10 interval=79068 count=6 add=4906, queue_step oid=10 interval=113828 count=3 add=13302, queue_step oid=10 interval=164162 count=1 add=0, queue_step oid=10 interval=204633 count=1 add=0, queue_step oid=10 interval=315221 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=646735 count=1 add=0, queue_step oid=10 interval=315220 count=1 add=0
Sent 36 801521.674298 801521.674298 61: seq: 10, queue_step oid=10 interval=204634 count=1 add=0, queue_step oid=10 interval=160944 count=3 add=-17662, queue_step oid=10 interval=111065 count=6 add=-5728, queue_step oid=10 interval=79104 count=6 add=4903, queue_step oid=10 interval=114002 count=3 add=13311, queue_step oid=10 interval=164797 count=1 add=0, queue_step oid=10 interval=205801 count=1 add=0
Sent 37 801521.674298 801521.674298 62: seq: 11, queue_step oid=10 interval=320531 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=623603 count=1 add=0, queue_step oid=10 interval=320531 count=1 add=0, queue_step oid=10 interval=205801 count=1 add=0, queue_step oid=10 interval=161469 count=3 add=-17850, queue_step oid=10 interval=111206 count=6 add=-5769, queue_step oid=10 interval=79168 count=6 add=4889
Sent 38 801521.674298 801521.674298 59: seq: 12, queue_step oid=10 interval=114204 count=3 add=13292, queue_step oid=10 interval=165465 count=1 add=0, queue_step oid=10 interval=206988 count=1 add=0, queue_step oid=10 interval=326166 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=599818 count=1 add=0, queue_step oid=10 interval=326166 count=1 add=0, queue_step oid=10 interval=206988 count=1 add=0
Sent 39 801521.674408 801521.674408 64: seq: 13, queue_step oid=10 interval=161996 count=3 add=-18038, queue_step oid=10 interval=111319 count=6 add=-5796, queue_step oid=10 interval=79192 count=6 add=4891, queue_step oid=10 interval=114363 count=3 add=13316, queue_step oid=10 interval=166097 count=1 add=0, queue_step oid=10 interval=208194 count=1 add=0, queue_step oid=10 interval=332165 count=1 add=0, set_next_step_dir oid=10 dir=1
Sent 40 801521.674454 801521.674454 61: seq: 14, queue_step oid=10 interval=575298 count=1 add=0, queue_step oid=10 interval=332165 count=1 add=0, queue_step oid=10 interval=208193 count=1 add=0, queue_step oid=10 interval=162528 count=3 add=-18230, queue_step oid=10 interval=111436 count=6 add=-5825, queue_step oid=10 interval=79227 count=6 add=4888, queue_step oid=10 interval=114541 count=3 add=13322
Sent 41 801521.674498 801521.674498 59: seq: 15, queue_step oid=10 interval=166751 count=1 add=0, queue_step oid=10 interval=209419 count=1 add=0, queue_step oid=10 interval=338579 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=549941 count=1 add=0, queue_step oid=10 interval=338579 count=1 add=0, queue_step oid=10 interval=209419 count=1 add=0, queue_step oid=10 interval=163064 count=3 add=-18423
Sent 42 801521.674603 801521.674603 62: seq: 16, queue_step oid=10 interval=111549 count=6 add=-5852, queue_step oid=10 interval=79251 count=6 add=4890, queue_step oid=10 interval=114701 count=3 add=13346, queue_step oid=10 interval=167393 count=1 add=0, queue_step oid=10 interval=210665 count=1 add=0, queue_step oid=10 interval=345470 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=523620 count=1 add=0
Sent 43 801521.674648 801521.674648 61: seq: 17, queue_step oid=10 interval=345470 count=1 add=0, queue_step oid=10 interval=210664 count=1 add=0, queue_step oid=10 interval=163605 count=3 add=-18619, queue_step oid=10 interval=111662 count=6 add=-5879, queue_step oid=10 interval=79279 count=6 add=4890, queue_step oid=10 interval=114867 count=3 add=13366, queue_step oid=10 interval=168043 count=1 add=0
Sent 44 801521.674737 801521.674737 61: seq: 18, queue_step oid=10 interval=211931 count=1 add=0, queue_step oid=10 interval=352914 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=496181 count=1 add=0, queue_step oid=10 interval=352915 count=1 add=0, queue_step oid=10 interval=211931 count=1 add=0, queue_step oid=10 interval=164149 count=3 add=-18816, queue_step oid=10 interval=111777 count=6 add=-5907
Sent 45 801521.797359 801521.797359 55: seq: 19, tmcuart_send oid=0 write=b'\xea\x03\xe8\xad\xe1' read=10, queue_step oid=10 interval=79504 count=6 add=4786, queue_step oid=10 interval=115414 count=3 add=13004, queue_step oid=10 interval=169082 count=1 add=0, queue_step oid=10 interval=213219 count=1 add=0, queue_step oid=10 interval=361013 count=1 add=0, set_next_step_dir oid=10 dir=1
Sent 46 801521.802324 801521.802324 14: seq: 1a, tmcuart_send oid=0 write=b'\xea\x03( \xc3' read=10
Sent 47 801521.980865 801521.980865 6: seq: 1b, get_clock
Sent 48 801522.150093 801522.150093 14: seq: 1c, tmcuart_send oid=1 write=b'\xea\x03\xe8\xad\xe1' read=10
Sent 49 801522.154800 801522.154800 14: seq: 1d, tmcuart_send oid=1 write=b'\xea\x03( \xc3' read=10
Sent 50 801522.191794 801522.191794 61: seq: 1e, queue_step oid=10 interval=467420 count=1 add=0, queue_step oid=10 interval=361013 count=1 add=0, queue_step oid=10 interval=213220 count=1 add=0, queue_step oid=10 interval=164698 count=3 add=-19016, queue_step oid=10 interval=111892 count=6 add=-5935, queue_step oid=10 interval=79531 count=6 add=4783, queue_step oid=10 interval=115635 count=3 add=12969
Sent 51 801522.191794 801522.191794 59: seq: 1f, queue_step oid=10 interval=169798 count=1 add=0, queue_step oid=10 interval=214530 count=1 add=0, queue_step oid=10 interval=369896 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=437075 count=1 add=0, queue_step oid=10 interval=369897 count=1 add=0, queue_step oid=10 interval=214529 count=1 add=0, queue_step oid=10 interval=165557 count=3 add=-19743
Sent 52 801522.191794 801522.191794 63: seq: 10, queue_step oid=10 interval=112752 count=6 add=-6311, queue_step oid=10 interval=80899 count=5 add=4121, queue_step oid=10 interval=104451 count=4 add=12014, queue_step oid=10 interval=171754 count=1 add=0, queue_step oid=10 interval=215863 count=1 add=0, queue_step oid=10 interval=379744 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=402910 count=2 add=-21291
Sent 53 801522.191794 801522.191794 60: seq: 11, queue_step oid=10 interval=215862 count=1 add=0, queue_step oid=10 interval=166101 count=3 add=-19957, queue_step oid=10 interval=112816 count=6 add=-6296, queue_step oid=10 interval=80700 count=5 add=4224, queue_step oid=10 interval=104370 count=4 add=12169, queue_step oid=10 interval=172250 count=1 add=0, queue_step oid=10 interval=217220 count=1 add=0
Sent 54 801522.191794 801522.191794 57: seq: 12, queue_step oid=10 interval=390811 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=368160 count=2 add=24526, queue_step oid=10 interval=217220 count=1 add=0, queue_step oid=10 interval=166648 count=3 add=-20171, queue_step oid=10 interval=112996 count=6 add=-6358, queue_step oid=10 interval=80885 count=5 add=4147
Sent 55 801522.191794 801522.191794 60: seq: 13, queue_step oid=10 interval=105277 count=3 add=11448, queue_step oid=10 interval=142180 count=2 add=29653, queue_step oid=10 interval=218601 count=1 add=0, queue_step oid=10 interval=403485 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=332052 count=1 add=0, queue_step oid=10 interval=403484 count=1 add=0, queue_step oid=10 interval=218601 count=1 add=0
Sent 56 801522.191794 801522.191794 62: seq: 14, queue_step oid=10 interval=167218 count=3 add=-20425, queue_step oid=10 interval=113230 count=5 add=-6447, queue_step oid=10 interval=81321 count=4 add=1630, queue_step oid=10 interval=91950 count=4 add=7930, queue_step oid=10 interval=124729 count=3 add=22382, queue_step oid=10 interval=221055 count=1 add=0, queue_step oid=10 interval=418402 count=1 add=0
Sent 57 801522.191794 801522.191794 63: seq: 15, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=289557 count=1 add=0, queue_step oid=10 interval=418402 count=1 add=0, queue_step oid=10 interval=220008 count=1 add=0, queue_step oid=10 interval=167792 count=3 add=-20681, queue_step oid=10 interval=113463 count=5 add=-6535, queue_step oid=10 interval=81427 count=4 add=1575, queue_step oid=10 interval=91904 count=4 add=8020
Sent 58 801522.191794 801522.191794 61: seq: 16, queue_step oid=10 interval=124911 count=3 add=22520, queue_step oid=10 interval=222615 count=1 add=0, queue_step oid=10 interval=436755 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=240164 count=1 add=0, queue_step oid=10 interval=436756 count=1 add=0, queue_step oid=10 interval=221441 count=1 add=0, queue_step oid=10 interval=168371 count=3 add=-20940
Sent 59 801522.191794 801522.191794 63: seq: 17, queue_step oid=10 interval=113724 count=5 add=-6641, queue_step oid=10 interval=81814 count=4 add=1253, queue_step oid=10 interval=92557 count=4 add=7730, queue_step oid=10 interval=125097 count=3 add=22655, queue_step oid=10 interval=224209 count=1 add=0, queue_step oid=10 interval=461372 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=178216 count=1 add=0
Sent 60 801522.191794 801522.191794 62: seq: 18, queue_step oid=10 interval=461373 count=1 add=0, queue_step oid=10 interval=222900 count=1 add=0, queue_step oid=10 interval=168957 count=3 add=-21205, queue_step oid=10 interval=114089 count=5 add=-6816, queue_step oid=10 interval=82129 count=4 add=1062, queue_step oid=10 interval=92851 count=4 add=7613, queue_step oid=10 interval=125354 count=3 add=22724
Sent 61 801522.191794 801522.191794 63: seq: 19, queue_step oid=10 interval=225898 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=1088217 count=1 add=0, queue_step oid=10 interval=224387 count=1 add=0, queue_step oid=10 interval=169547 count=3 add=-21472, queue_step oid=10 interval=114452 count=5 add=-6990, queue_step oid=10 interval=82337 count=4 add=977, queue_step oid=10 interval=92944 count=4 add=7595
Sent 62 801522.192258 801522.192258 63: seq: 1a, queue_step oid=10 interval=125615 count=3 add=22791, queue_step oid=10 interval=227620 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=1075439 count=1 add=0, queue_step oid=10 interval=225904 count=1 add=0, queue_step oid=10 interval=170141 count=3 add=-21742, queue_step oid=10 interval=114823 count=5 add=-7168, queue_step oid=10 interval=83279 count=3 add=0
Sent 63 801522.192258 801522.192258 64: seq: 1b, queue_step oid=10 interval=85609 count=5 add=7517, queue_step oid=10 interval=125966 count=3 add=22773, queue_step oid=10 interval=229459 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=1062625 count=1 add=0, queue_step oid=10 interval=227451 count=1 add=0, queue_step oid=10 interval=170741 count=3 add=-22016, queue_step oid=10 interval=114728 count=5 add=-7035
Sent 64 801522.192311 801522.192311 63: seq: 1c, queue_step oid=10 interval=82403 count=4 add=901, queue_step oid=10 interval=93194 count=4 add=7516, queue_step oid=10 interval=126203 count=3 add=22866, queue_step oid=10 interval=231224 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=1049773 count=1 add=0, queue_step oid=10 interval=229028 count=1 add=0, queue_step oid=10 interval=171346 count=3 add=-22293
Sent 65 801522.192879 801522.192879 63: seq: 1d, queue_step oid=10 interval=114984 count=5 add=-7136, queue_step oid=10 interval=82453 count=4 add=912, queue_step oid=10 interval=93160 count=4 add=7582, queue_step oid=10 interval=126343 count=3 add=23053, queue_step oid=10 interval=232937 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=1036879 count=1 add=0, queue_step oid=10 interval=230638 count=1 add=0
Sent 66 801522.192879 801522.192879 64: seq: 1e, queue_step oid=10 interval=171956 count=3 add=-22574, queue_step oid=10 interval=115400 count=5 add=-7343, queue_step oid=10 interval=83381 count=3 add=0, queue_step oid=10 interval=85611 count=5 add=7591, queue_step oid=10 interval=126577 count=3 add=23152, queue_step oid=10 interval=234773 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=1023940 count=1 add=0
Sent 67 801522.192879 801522.192879 64: seq: 1f, queue_step oid=10 interval=232281 count=1 add=0, queue_step oid=10 interval=172572 count=3 add=-22859, queue_step oid=10 interval=115669 count=5 add=-7451, queue_step oid=10 interval=83474 count=3 add=0, queue_step oid=10 interval=85556 count=5 add=7643, queue_step oid=10 interval=126731 count=3 add=23330, queue_step oid=10 interval=236568 count=1 add=0, set_next_step_dir oid=10 dir=1
Sent 68 801522.192879 801522.192879 61: seq: 10, queue_step oid=10 interval=1010954 count=1 add=0, queue_step oid=10 interval=233958 count=1 add=0, queue_step oid=10 interval=173194 count=3 add=-23148, queue_step oid=10 interval=115888 count=5 add=-7526, queue_step oid=10 interval=83529 count=3 add=0, queue_step oid=10 interval=85532 count=5 add=7680, queue_step oid=10 interval=126915 count=3 add=23481
Sent 69 801522.192879 801522.192879 62: seq: 11, queue_step oid=10 interval=238430 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=997917 count=1 add=0, queue_step oid=10 interval=235672 count=1 add=0, queue_step oid=10 interval=173821 count=3 add=-23440, queue_step oid=10 interval=116165 count=5 add=-7658, queue_step oid=10 interval=83724 count=3 add=0, queue_step oid=10 interval=85427 count=5 add=7748
Sent 70 801522.275851 801522.275851 56: seq: 12, tmcuart_send oid=2 write=b'\xea\x03\xe8\xad\xe1' read=10, queue_step oid=10 interval=127057 count=3 add=23672, queue_step oid=10 interval=240299 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=984825 count=1 add=0, queue_step oid=10 interval=237424 count=1 add=0, queue_step oid=10 interval=174454 count=3 add=-23738
Sent 71 801522.280922 801522.280922 14: seq: 13, tmcuart_send oid=3 write=b'\xea\x03\xe8\xad\xe1' read=10
Sent 72 801522.286018 801522.286018 14: seq: 14, tmcuart_send oid=2 write=b'\xea\x03( \xc3' read=10
Sent 73 801522.290799 801522.290799 14: seq: 15, tmcuart_send oid=3 write=b'\xea\x03( \xc3' read=10
Sent 74 801522.697905 801522.697905 62: seq: 16, queue_step oid=10 interval=116352 count=5 add=-7709, queue_step oid=10 interval=83743 count=3 add=0, queue_step oid=10 interval=85433 count=5 add=7772, queue_step oid=10 interval=127138 count=3 add=24051, queue_step oid=10 interval=241896 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=971676 count=1 add=0, queue_step oid=10 interval=239213 count=1 add=0
Sent 75 801522.697905 801522.697905 62: seq: 17, queue_step oid=10 interval=175094 count=3 add=-24040, queue_step oid=10 interval=116618 count=4 add=-7840, queue_step oid=10 interval=85696 count=4 add=-1300, queue_step oid=10 interval=87272 count=5 add=6901, queue_step oid=10 interval=130187 count=2 add=20247, queue_step oid=10 interval=178575 count=1 add=0, queue_step oid=10 interval=241044 count=1 add=0
Sent 76 801522.697905 801522.697905 56: seq: 18, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=958464 count=1 add=0, queue_step oid=10 interval=241044 count=1 add=0, queue_step oid=10 interval=175735 count=3 add=-24337, queue_step oid=10 interval=116975 count=4 add=-8065, queue_step oid=10 interval=86047 count=4 add=-1526, queue_step oid=10 interval=87806 count=5 add=6630
Sent 77 801522.697905 801522.697905 63: seq: 19, queue_step oid=10 interval=131054 count=2 add=19714, queue_step oid=10 interval=179233 count=1 add=0, queue_step oid=10 interval=242917 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=945187 count=1 add=0, queue_step oid=10 interval=242917 count=1 add=0, queue_step oid=10 interval=176268 count=3 add=-24410, queue_step oid=10 interval=116813 count=4 add=-7884
Sent 78 801522.697905 801522.697905 61: seq: 1a, queue_step oid=10 interval=85728 count=4 add=-1315, queue_step oid=10 interval=87368 count=5 add=6900, queue_step oid=10 interval=130731 count=2 add=20372, queue_step oid=10 interval=179898 count=1 add=0, queue_step oid=10 interval=244835 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=931839 count=1 add=0, queue_step oid=10 interval=244834 count=1 add=0
Sent 79 801522.697905 801522.697905 62: seq: 1b, queue_step oid=10 interval=176923 count=3 add=-24720, queue_step oid=10 interval=117185 count=4 add=-8119, queue_step oid=10 interval=86093 count=4 add=-1550, queue_step oid=10 interval=87673 count=5 add=6784, queue_step oid=10 interval=131207 count=2 add=20233, queue_step oid=10 interval=180570 count=1 add=0, queue_step oid=10 interval=246797 count=1 add=0
Sent 80 801522.697905 801522.697905 56: seq: 1c, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=918417 count=1 add=0, queue_step oid=10 interval=246798 count=1 add=0, queue_step oid=10 interval=177572 count=3 add=-25009, queue_step oid=10 interval=117427 count=4 add=-8237, queue_step oid=10 interval=86249 count=4 add=-1649, queue_step oid=10 interval=87862 count=5 add=6712
Sent 81 801522.697905 801522.697905 63: seq: 1d, queue_step oid=10 interval=131625 count=2 add=20154, queue_step oid=10 interval=181248 count=1 add=0, queue_step oid=10 interval=248809 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=904915 count=1 add=0, queue_step oid=10 interval=248809 count=1 add=0, queue_step oid=10 interval=179176 count=2 add=-27200, queue_step oid=10 interval=127825 count=5 add=-9288
Sent 82 801522.697905 801522.697905 61: seq: 1e, queue_step oid=10 interval=88835 count=3 add=-3536, queue_step oid=10 interval=81262 count=6 add=6690, queue_step oid=10 interval=131939 count=2 add=20181, queue_step oid=10 interval=181932 count=1 add=0, queue_step oid=10 interval=250871 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=891330 count=1 add=0, queue_step oid=10 interval=250870 count=1 add=0
Sent 83 801522.697905 801522.697905 62: seq: 1f, queue_step oid=10 interval=179818 count=2 add=-27458, queue_step oid=10 interval=128020 count=5 add=-9344, queue_step oid=10 interval=88936 count=3 add=-3607, queue_step oid=10 interval=81266 count=6 add=6706, queue_step oid=10 interval=132176 count=2 add=20287, queue_step oid=10 interval=182624 count=1 add=0, queue_step oid=10 interval=252985 count=1 add=0
Sent 84 801522.697905 801522.697905 56: seq: 10, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=877654 count=1 add=0, queue_step oid=10 interval=252985 count=1 add=0, queue_step oid=10 interval=180465 count=2 add=-27719, queue_step oid=10 interval=128146 count=5 add=-9353, queue_step oid=10 interval=88874 count=3 add=-3557, queue_step oid=10 interval=81245 count=6 add=6735
Sent 85 801522.697905 801522.697905 63: seq: 11, queue_step oid=10 interval=132373 count=2 add=20433, queue_step oid=10 interval=183323 count=1 add=0, queue_step oid=10 interval=255155 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=863883 count=1 add=0, queue_step oid=10 interval=255155 count=1 add=0, queue_step oid=10 interval=181119 count=2 add=-27984, queue_step oid=10 interval=128352 count=5 add=-9416
Sent 86 801522.698351 801522.698351 61: seq: 12, queue_step oid=10 interval=88996 count=3 add=-3644, queue_step oid=10 interval=81259 count=6 add=6746, queue_step oid=10 interval=132628 count=2 add=20524, queue_step oid=10 interval=184028 count=1 add=0, queue_step oid=10 interval=257383 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=850011 count=1 add=0, queue_step oid=10 interval=257382 count=1 add=0
Sent 87 801522.698351 801522.698351 62: seq: 13, queue_step oid=10 interval=181780 count=2 add=-28254, queue_step oid=10 interval=128540 count=5 add=-9466, queue_step oid=10 interval=89069 count=3 add=-3695, queue_step oid=10 interval=81248 count=6 add=6770, queue_step oid=10 interval=132839 count=2 add=20661, queue_step oid=10 interval=184741 count=1 add=0, queue_step oid=10 interval=259671 count=1 add=0
Sent 88 801522.698460 801522.698460 56: seq: 14, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=836031 count=1 add=0, queue_step oid=10 interval=259671 count=1 add=0, queue_step oid=10 interval=181778 count=2 add=-27190, queue_step oid=10 interval=128738 count=4 add=-9523, queue_step oid=10 interval=90941 count=4 add=-2818, queue_step oid=10 interval=81289 count=5 add=6768
Sent 89 801522.698460 801522.698460 63: seq: 15, queue_step oid=10 interval=116324 count=3 add=17484, queue_step oid=10 interval=186144 count=1 add=0, queue_step oid=10 interval=262024 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=821935 count=1 add=0, queue_step oid=10 interval=262024 count=1 add=0, queue_step oid=10 interval=183121 count=2 add=-28806, queue_step oid=10 interval=128975 count=4 add=-9606
Sent 90 801522.698556 801522.698556 61: seq: 16, queue_step oid=10 interval=91288 count=4 add=-3040, queue_step oid=10 interval=81303 count=5 add=6779, queue_step oid=10 interval=116451 count=3 add=17557, queue_step oid=10 interval=186950 count=1 add=0, queue_step oid=10 interval=264444 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=807718 count=1 add=0, queue_step oid=10 interval=264444 count=1 add=0
Sent 91 801522.698680 801522.698680 62: seq: 17, queue_step oid=10 interval=183802 count=2 add=-29089, queue_step oid=10 interval=129136 count=4 add=-9638, queue_step oid=10 interval=90998 count=4 add=-2837, queue_step oid=10 interval=81316 count=5 add=6791, queue_step oid=10 interval=116572 count=3 add=17636, queue_step oid=10 interval=187760 count=1 add=0, queue_step oid=10 interval=266935 count=1 add=0
Sent 92 801522.698760 801522.698760 56: seq: 18, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=793370 count=1 add=0, queue_step oid=10 interval=266935 count=1 add=0, queue_step oid=10 interval=184489 count=2 add=-29375, queue_step oid=10 interval=129337 count=4 add=-9697, queue_step oid=10 interval=91355 count=4 add=-3065, queue_step oid=10 interval=81330 count=5 add=6802
Sent 93 801522.698832 801522.698832 63: seq: 19, queue_step oid=10 interval=116698 count=3 add=17712, queue_step oid=10 interval=188579 count=1 add=0, queue_step oid=10 interval=269502 count=1 add=0, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=778884 count=1 add=0, queue_step oid=10 interval=269502 count=1 add=0, queue_step oid=10 interval=185183 count=2 add=-29665, queue_step oid=10 interval=129588 count=4 add=-9799
Sent 94 801522.698904 801522.698904 61: seq: 1a, queue_step oid=10 interval=91463 count=4 add=-3118, queue_step oid=10 interval=81348 count=5 add=6812, queue_step oid=10 interval=116817 count=3 add=17795, queue_step oid=10 interval=189403 count=1 add=0, queue_step oid=10 interval=272148 count=1 add=0, set_next_step_dir oid=10 dir=1, queue_step oid=10 interval=764248 count=1 add=0, queue_step oid=10 interval=272148 count=1 add=0
Sent 95 801522.698904 801522.698904 62: seq: 1b, queue_step oid=10 interval=185884 count=2 add=-29960, queue_step oid=10 interval=129790 count=4 add=-9866, queue_step oid=10 interval=91169 count=4 add=-2904, queue_step oid=10 interval=81362 count=5 add=6823, queue_step oid=10 interval=116942 count=3 add=17873, queue_step oid=10 interval=190239 count=1 add=0, queue_step oid=10 interval=274878 count=1 add=0
Sent 96 801522.699053 801522.699053 56: seq: 1c, set_next_step_dir oid=10 dir=0, queue_step oid=10 interval=749456 count=1 add=0, queue_step oid=10 interval=274878 count=1 add=0, queue_step oid=10 interval=186593 count=2 add=-30260, queue_step oid=10 interval=129990 count=4 add=-9931, queue_step oid=10 interval=91644 count=4 add=-3204, queue_step oid=10 interval=81376 count=5 add=6834
Sent 97 801522.797580 801522.797580 23: seq: 1d, tmcuart_send oid=0 write=b'\xea\x03\xe8\xad\xe1' read=10, queue_step oid=10 interval=117070 count=3 add=17948
Sent 98 801522.802401 801522.802401 14: seq: 1e, tmcuart_send oid=0 write=b'\xea\x03( \xc3' read=10
Sent 99 801522.858970 801522.858970 6: seq: 1f, emergency_stop
Dumping receive queue 100 messages
Receive: 0 801516.572720 801516.286218 15: seq: 1a, analog_in_state oid=25 next_clock=391032704 value=31018
Receive: 1 801516.786910 801516.782936 18: seq: 1c, tmcuart_response oid=0 read=b'\n\xfa\xef-\xe02\x02\x08 \x82'
Receive: 2 801516.791294 801516.787351 18: seq: 1d, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 3 801516.791519 801516.787351 15: seq: 1d, analog_in_state oid=17 next_clock=417432704 value=30812
Receive: 4 801516.871554 801516.787351 15: seq: 1d, analog_in_state oid=25 next_clock=427032704 value=31020
Receive: 5 801517.056939 801517.056765 11: seq: 1e, clock clock=414151373
Receive: 6 801517.091548 801517.056765 15: seq: 1e, analog_in_state oid=17 next_clock=453432704 value=30818
Receive: 7 801517.149476 801517.145495 18: seq: 1f, tmcuart_response oid=1 read=b'\n\xfa\xef-\xa02\x02\x08 \x89'
Receive: 8 801517.153808 801517.149866 18: seq: 10, tmcuart_response oid=1 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 9 801517.172108 801517.149866 15: seq: 10, analog_in_state oid=25 next_clock=463032704 value=31023
Receive: 10 801517.277352 801517.273365 18: seq: 11, tmcuart_response oid=2 read=b'\n\xfa\xef-\xe0&\x02\x08 \x90'
Receive: 11 801517.281708 801517.277777 18: seq: 12, tmcuart_response oid=3 read=b'\n\xfa\xef-\xe0&\x02\x08 \x90'
Receive: 12 801517.286066 801517.282118 18: seq: 13, tmcuart_response oid=2 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 13 801517.290572 801517.286625 18: seq: 14, tmcuart_response oid=3 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 14 801517.391567 801517.286625 15: seq: 14, analog_in_state oid=17 next_clock=489432704 value=30817
Receive: 15 801517.471581 801517.286625 15: seq: 14, analog_in_state oid=25 next_clock=499032704 value=31022
Receive: 16 801517.691635 801517.613809 15: seq: 18, analog_in_state oid=17 next_clock=525432704 value=30822
Receive: 17 801517.771696 801517.613809 15: seq: 18, analog_in_state oid=25 next_clock=535032704 value=31024
Receive: 18 801517.795212 801517.791186 18: seq: 19, tmcuart_response oid=0 read=b'\n\xfa\xef-\xe02\x02\x08 \x82'
Receive: 19 801517.800088 801517.796078 18: seq: 1a, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 20 801517.991654 801517.796078 15: seq: 1a, analog_in_state oid=17 next_clock=561432704 value=30814
Receive: 21 801518.044563 801518.042815 11: seq: 1b, clock clock=532534358
Receive: 22 801518.071664 801518.042815 15: seq: 1b, analog_in_state oid=25 next_clock=571032704 value=31026
Receive: 23 801518.114619 801518.042815 15: seq: 1b, stats count=621 sum=1115467 sumsq=17879323
Receive: 24 801518.150997 801518.146866 18: seq: 1c, tmcuart_response oid=1 read=b'\n\xfa\xef-\xa02\x02\x08 \x89'
Receive: 25 801518.156366 801518.152242 18: seq: 1d, tmcuart_response oid=1 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 26 801518.277746 801518.273721 18: seq: 10, tmcuart_response oid=2 read=b'\n\xfa\xef-\xe0&\x02\x08 \x90'
Receive: 27 801518.282581 801518.278582 18: seq: 11, tmcuart_response oid=3 read=b'\n\xfa\xef-\xe0&\x02\x08 \x90'
Receive: 28 801518.291702 801518.278582 15: seq: 11, analog_in_state oid=17 next_clock=597432704 value=30812
Receive: 29 801518.296028 801518.292005 18: seq: 12, tmcuart_response oid=2 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 30 801518.300959 801518.296947 18: seq: 13, tmcuart_response oid=3 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 31 801518.371715 801518.296947 15: seq: 13, analog_in_state oid=25 next_clock=607032704 value=31024
Receive: 32 801518.591762 801518.296947 15: seq: 13, analog_in_state oid=17 next_clock=633432704 value=30814
Receive: 33 801518.671700 801518.671102 15: seq: 16, analog_in_state oid=25 next_clock=643032704 value=31027
Receive: 34 801518.799411 801518.795343 18: seq: 17, tmcuart_response oid=0 read=b'\n\xfa\xef-\xe02\x02\x08 \x82'
Receive: 35 801518.804468 801518.800491 18: seq: 18, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 36 801518.891693 801518.800491 15: seq: 18, analog_in_state oid=17 next_clock=669432704 value=30808
Receive: 37 801518.971718 801518.800491 15: seq: 18, analog_in_state oid=25 next_clock=679032704 value=31015
Receive: 38 801519.026392 801519.026160 11: seq: 19, clock clock=650468618
Receive: 39 801519.151564 801519.147407 18: seq: 1a, tmcuart_response oid=1 read=b'\n\xfa\xef-\xa02\x02\x08 \x89'
Receive: 40 801519.156800 801519.152784 18: seq: 1b, tmcuart_response oid=1 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 41 801519.191704 801519.181271 15: seq: 1d, analog_in_state oid=17 next_clock=705432704 value=30815
Receive: 42 801519.271738 801519.181271 15: seq: 1d, analog_in_state oid=25 next_clock=715032704 value=31027
Receive: 43 801519.278330 801519.274264 18: seq: 1e, tmcuart_response oid=2 read=b'\n\xfa\xef-\xe0&\x02\x08 \x90'
Receive: 44 801519.283405 801519.279168 18: seq: 1f, tmcuart_response oid=3 read=b'\n\xfa\xef-\xe0&\x02\x08 \x90'
Receive: 45 801519.288547 801519.284484 18: seq: 10, tmcuart_response oid=2 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 46 801519.293410 801519.289398 18: seq: 11, tmcuart_response oid=3 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 47 801519.491740 801519.289398 15: seq: 11, analog_in_state oid=17 next_clock=741432704 value=30815
Receive: 48 801519.571981 801519.289398 15: seq: 11, analog_in_state oid=25 next_clock=751032704 value=31022
Receive: 49 801519.791771 801519.667320 15: seq: 15, analog_in_state oid=17 next_clock=777432704 value=30821
Receive: 50 801519.800766 801519.796648 18: seq: 16, tmcuart_response oid=0 read=b'\n\xfa\xef-\xe02\x02\x08 \x82'
Receive: 51 801519.810601 801519.806590 18: seq: 17, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 52 801519.871767 801519.806590 15: seq: 17, analog_in_state oid=25 next_clock=787032704 value=31026
Receive: 53 801520.011221 801520.011006 11: seq: 18, clock clock=768641328
Receive: 54 801520.091846 801520.011006 15: seq: 18, analog_in_state oid=17 next_clock=813432704 value=30812
Receive: 55 801520.159058 801520.154428 18: seq: 1d, tmcuart_response oid=1 read=b'\n\xfa\xef-\xa02\x02\x08 \x89'
Receive: 56 801520.163786 801520.159751 18: seq: 1e, tmcuart_response oid=1 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 57 801520.172231 801520.159751 15: seq: 1e, analog_in_state oid=25 next_clock=823032704 value=31021
Receive: 58 801520.278724 801520.274664 18: seq: 1f, tmcuart_response oid=2 read=b'\n\xfa\xef-\xe0&\x02\x08 \x90'
Receive: 59 801520.283788 801520.279690 18: seq: 10, tmcuart_response oid=3 read=b'\n\xfa\xef-\xe0&\x02\x08 \x90'
Receive: 60 801520.289176 801520.285139 18: seq: 11, tmcuart_response oid=2 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 61 801520.294037 801520.290034 18: seq: 12, tmcuart_response oid=3 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 62 801520.391887 801520.290034 15: seq: 12, analog_in_state oid=17 next_clock=849432704 value=30815
Receive: 63 801520.471816 801520.290034 15: seq: 12, analog_in_state oid=25 next_clock=859032704 value=31025
Receive: 64 801520.691805 801520.290034 15: seq: 12, analog_in_state oid=17 next_clock=885432704 value=30817
Receive: 65 801520.772138 801520.696547 15: seq: 17, analog_in_state oid=25 next_clock=895032704 value=31022
Receive: 66 801520.801090 801520.797000 18: seq: 18, tmcuart_response oid=0 read=b'\n\xfa\xef-\xe02\x02\x08 \x82'
Receive: 67 801520.806035 801520.802019 18: seq: 19, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 68 801520.991824 801520.802019 15: seq: 19, analog_in_state oid=17 next_clock=921432704 value=30814
Receive: 69 801520.995960 801520.995649 11: seq: 1a, clock clock=886792748
Receive: 70 801521.071813 801520.995649 15: seq: 1a, analog_in_state oid=25 next_clock=931032704 value=31026
Receive: 71 801521.152996 801521.148974 18: seq: 1b, tmcuart_response oid=1 read=b'\n\xfa\xef-\xa02\x02\x08 \x89'
Receive: 72 801521.157850 801521.153862 18: seq: 1c, tmcuart_response oid=1 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 73 801521.279214 801521.275206 18: seq: 10, tmcuart_response oid=2 read=b'\n\xfa\xef-\xe0&\x02\x08 \x90'
Receive: 74 801521.284085 801521.280061 18: seq: 11, tmcuart_response oid=3 read=b'\n\xfa\xef-\xe0&\x02\x08 \x90'
Receive: 75 801521.289446 801521.285445 18: seq: 12, tmcuart_response oid=2 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 76 801521.291830 801521.290263 15: seq: 13, analog_in_state oid=17 next_clock=957432704 value=30812
Receive: 77 801521.294240 801521.290263 18: seq: 13, tmcuart_response oid=3 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 78 801521.371846 801521.290263 15: seq: 13, analog_in_state oid=25 next_clock=967032704 value=31026
Receive: 79 801521.592006 801521.290263 15: seq: 13, analog_in_state oid=17 next_clock=993432704 value=30816
Receive: 80 801521.672241 801521.290263 15: seq: 13, analog_in_state oid=25 next_clock=1003032704 value=31022
Receive: 81 801521.801434 801521.797359 18: seq: 1a, tmcuart_response oid=0 read=b'\n\xfa\xef-\xe02\x02\x08 \x82'
Receive: 82 801521.806314 801521.802324 18: seq: 1b, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 83 801521.891871 801521.802324 15: seq: 1b, analog_in_state oid=17 next_clock=1029432704 value=30818
Receive: 84 801521.972597 801521.802324 15: seq: 1b, analog_in_state oid=25 next_clock=1039032704 value=31030
Receive: 85 801521.981177 801521.980865 11: seq: 1c, clock clock=1005016588
Receive: 86 801522.154092 801522.150093 18: seq: 1d, tmcuart_response oid=1 read=b'\n\xfa\xef-\xa02\x02\x08 \x89'
Receive: 87 801522.158814 801522.154800 18: seq: 1e, tmcuart_response oid=1 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 88 801522.191936 801522.154800 15: seq: 1e, analog_in_state oid=17 next_clock=1065432704 value=30819
Receive: 89 801522.271891 801522.192879 15: seq: 12, analog_in_state oid=25 next_clock=1075032704 value=31021
Receive: 90 801522.279902 801522.275851 18: seq: 13, tmcuart_response oid=2 read=b'\n\xfa\xef-\xe0&\x02\x08 \x90'
Receive: 91 801522.284964 801522.280922 18: seq: 14, tmcuart_response oid=3 read=b'\n\xfa\xef-\xe0&\x02\x08 \x90'
Receive: 92 801522.290000 801522.286018 18: seq: 15, tmcuart_response oid=2 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 93 801522.294774 801522.290799 18: seq: 16, tmcuart_response oid=3 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 94 801522.491964 801522.290799 15: seq: 16, analog_in_state oid=17 next_clock=1101432704 value=30816
Receive: 95 801522.572104 801522.290799 15: seq: 16, analog_in_state oid=25 next_clock=1111032704 value=31026
Receive: 96 801522.791962 801522.699053 15: seq: 1d, analog_in_state oid=17 next_clock=1137432704 value=30818
Receive: 97 801522.801610 801522.797580 18: seq: 1e, tmcuart_response oid=0 read=b'\n\xfa\xef-\xe02\x02\x08 \x82'
Receive: 98 801522.806384 801522.802401 18: seq: 1f, tmcuart_response oid=0 read=b'\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 99 801522.859485 801522.858970 12: seq: 10, shutdown clock=1110387408 static_string_id=Command request
Testing frequency 18 Hz
Testing frequency 19 Hz
Testing frequency 20 Hz
Testing frequency 21 Hz
Testing frequency 22 Hz
Testing frequency 23 Hz
Testing frequency 24 Hz
Testing frequency 25 Hz
Testing frequency 26 Hz
Testing frequency 27 Hz
Testing frequency 28 Hz
Testing frequency 29 Hz
Testing frequency 30 Hz
Testing frequency 31 Hz
Testing frequency 32 Hz
Testing frequency 33 Hz
Testing frequency 34 Hz
Testing frequency 35 Hz
Testing frequency 36 Hz
Testing frequency 37 Hz
Testing frequency 38 Hz
Testing frequency 39 Hz
Testing frequency 40 Hz
Testing frequency 41 Hz
Testing frequency 42 Hz
Testing frequency 43 Hz
Testing frequency 44 Hz
Testing frequency 45 Hz
Testing frequency 46 Hz
Testing frequency 47 Hz
Testing frequency 48 Hz
Testing frequency 49 Hz
Testing frequency 50 Hz
Testing frequency 51 Hz
Testing frequency 52 Hz
Testing frequency 53 Hz
Testing frequency 54 Hz
Testing frequency 55 Hz
Testing frequency 56 Hz
Testing frequency 57 Hz
Testing frequency 58 Hz
Testing frequency 59 Hz
Testing frequency 60 Hz
Testing frequency 61 Hz
Testing frequency 62 Hz
Testing frequency 63 Hz
Testing frequency 64 Hz
Testing frequency 65 Hz
Testing frequency 66 Hz
Testing frequency 67 Hz
Testing frequency 68 Hz
Testing frequency 69 Hz
Testing frequency 70 Hz
Testing frequency 71 Hz
Testing frequency 72 Hz
Testing frequency 73 Hz
Testing frequency 74 Hz
Testing frequency 75 Hz
Testing frequency 76 Hz
Testing frequency 77 Hz
Testing frequency 78 Hz
Testing frequency 79 Hz
Testing frequency 80 Hz
Testing frequency 81 Hz
Testing frequency 82 Hz
Testing frequency 83 Hz
Testing frequency 84 Hz
Testing frequency 85 Hz
Testing frequency 86 Hz
Testing frequency 87 Hz
Testing frequency 88 Hz
Testing frequency 89 Hz
Testing frequency 90 Hz
Testing frequency 91 Hz
Testing frequency 92 Hz
Testing frequency 93 Hz
Testing frequency 94 Hz
Testing frequency 95 Hz
Testing frequency 96 Hz
Testing frequency 97 Hz
Testing frequency 98 Hz
Testing frequency 99 Hz
Testing frequency 100 Hz
Testing frequency 101 Hz
Testing frequency 102 Hz
Testing frequency 103 Hz
Testing frequency 104 Hz
Testing frequency 105 Hz
Testing frequency 106 Hz
Testing frequency 107 Hz
Testing frequency 108 Hz
Testing frequency 109 Hz
Testing frequency 110 Hz
Testing frequency 111 Hz
Testing frequency 112 Hz
Testing frequency 113 Hz
Testing frequency 114 Hz
Testing frequency 115 Hz
Testing frequency 116 Hz
Testing frequency 117 Hz
Testing frequency 118 Hz
Testing frequency 119 Hz
Testing frequency 120 Hz
Testing frequency 121 Hz
Testing frequency 122 Hz
Testing frequency 123 Hz
Testing frequency 124 Hz
Testing frequency 125 Hz
Testing frequency 126 Hz
Testing frequency 127 Hz
Testing frequency 128 Hz
Testing frequency 129 Hz
Testing frequency 130 Hz
Testing frequency 131 Hz
Testing frequency 132 Hz
Testing frequency 133 Hz
Shutdown due to webhooks request
Once the underlying issue is corrected, use the
"FIRMWARE_RESTART" command to reset the firmware, reload the
config, and restart the host software.
Printer is shutdown

Shutdown due to webhooks request
Once the underlying issue is corrected, use the
"FIRMWARE_RESTART" command to reset the firmware, reload the
config, and restart the host software.
Printer is shutdown

Stats 801525.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=51984 bytes_read=33319 bytes_retransmit=9 bytes_invalid=0 send_seq=1494 receive_seq=1494 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=525235 freq=119993253 adxl: mcu_awake=0.204 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=2226 bytes_read=270122 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999574 adj=12000753 heater_bed: target=0 temp=31.7 pwm=0.000  sysload=0.19 cputime=21.952 memavail=7253832 print_time=163.477 buffer_time=115.734 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Attempting MCU 'mcu' reset command
Attempting MCU 'adxl' reset command
webhooks client 547887667616: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:24:43 2023 (1700367883.7 801526.7)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[mcu adxl]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00

[adxl345]
cs_pin = adxl:gpio1
spi_bus = spi0a
axes_map = x,z,y

[resonance_tester]
accel_chip = adxl345
probe_points = 
	150,150, 20

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547879045968: New connection
webhooks client 547879045968: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
Loaded MCU 'mcu' 105 commands (v0.11.0-159-gfec7ddd8 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'adxl': Starting serial connect
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
Attempting MCU 'mcu' reset command
Attempting MCU 'adxl' reset
Unhandled exception during post run
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 234, in run
    self.send_event("klippy:firmware_restart")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 951, in _firmware_restart
    self._restart_arduino()
  File "/home/pi/klipper/klippy/mcu.py", line 911, in _restart_arduino
    serialhdl.arduino_reset(self._serialport, self._reactor)
  File "/home/pi/klipper/klippy/serialhdl.py", line 385, in arduino_reset
    ser.dtr = False
  File "/home/pi/klippy-env/lib/python3.9/site-packages/serial/serialutil.py", line 469, in dtr
    self._update_dtr_state()
  File "/home/pi/klippy-env/lib/python3.9/site-packages/serial/serialposix.py", line 636, in _update_dtr_state
    fcntl.ioctl(self.fd, TIOCMBIC, TIOCM_DTR_str)
BrokenPipeError: [Errno 32] Broken pipe
Restarting printer
Start printer at Sat Nov 18 20:25:00 2023 (1700367900.9 801543.9)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[mcu adxl]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00

[adxl345]
cs_pin = adxl:gpio1
spi_bus = spi0a
axes_map = x,z,y

[resonance_tester]
accel_chip = adxl345
probe_points = 
	150,150, 20

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547880030560: New connection
webhooks client 547880030560: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
Loaded MCU 'mcu' 105 commands (v0.11.0-159-gfec7ddd8 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'adxl': Starting serial connect
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-311-g9e765dae'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sat Nov 18 20:25:52 2023 (1700367952.6 21.2)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[mcu adxl]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00

[adxl345]
cs_pin = adxl:gpio1
spi_bus = spi0a
axes_map = x,z,y

[resonance_tester]
accel_chip = adxl345
probe_points = 
	150,150, 20

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
webhooks client 547987856736: New connection
webhooks client 547987856736: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0'
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 800, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 805, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(745): Sun Mar 26 19:12:46 2023
========= Last MCU build config =========
# CONFIG_LOW_LEVEL_OPTIONS is not set
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
CONFIG_MACH_LINUX=y
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="linux"
CONFIG_CLOCK_FREQ=50000000
CONFIG_LINUX_SELECT=y
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(9215): Sun Mar 26 19:13:03 2023
Last MCU build version: v0.11.0-122-ge6ef48cd
Last MCU build tools: gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2
Last MCU build config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(818424): Sun Mar 26 19:13:11 2023
Attempting MCU 'mcu' reset
Attempting MCU 'adxl' reset
webhooks client 547987856736: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:31:59 2023 (1700368319.0 370.0)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[mcu adxl]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00

[adxl345]
cs_pin = adxl:gpio1
spi_bus = spi0a
axes_map = x,z,y

[resonance_tester]
accel_chip = adxl345
probe_points = 
	150,150, 20

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547995003152: New connection
webhooks client 547995003152: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
mcu 'mcu': got {'count': 396, 'sum': 39559, 'sumsq': 38436, '#name': 'stats', '#sent_time': 371.373332056, '#receive_time': 371.407725778}
Loaded MCU 'mcu' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'adxl': Starting serial connect
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
Attempting MCU 'mcu' reset command
Attempting MCU 'adxl' reset
Unhandled exception during post run
Traceback (most recent call last):
  File "/home/pi/klippy-env/lib/python3.9/site-packages/serial/serialposix.py", line 265, in open
    self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
OSError: [Errno 5] Input/output error: '/dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 234, in run
    self.send_event("klippy:firmware_restart")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 951, in _firmware_restart
    self._restart_arduino()
  File "/home/pi/klipper/klippy/mcu.py", line 911, in _restart_arduino
    serialhdl.arduino_reset(self._serialport, self._reactor)
  File "/home/pi/klipper/klippy/serialhdl.py", line 379, in arduino_reset
    ser = serial.Serial(serialport, 2400, timeout=0, exclusive=True)
  File "/home/pi/klippy-env/lib/python3.9/site-packages/serial/serialutil.py", line 240, in __init__
    self.open()
  File "/home/pi/klippy-env/lib/python3.9/site-packages/serial/serialposix.py", line 268, in open
    raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
serial.serialutil.SerialException: [Errno 5] could not open port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 5] Input/output error: '/dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00'
Restarting printer
Start printer at Sat Nov 18 20:32:40 2023 (1700368360.2 411.2)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[mcu adxl]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00

[adxl345]
cs_pin = adxl:gpio1
spi_bus = spi0a
axes_map = x,z,y

[resonance_tester]
accel_chip = adxl345
probe_points = 
	150,150, 20

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547987778480: New connection
webhooks client 547987778480: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
Loaded MCU 'mcu' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'adxl': Starting serial connect
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
mcu 'adxl': Unable to open serial port: [Errno 11] Could not exclusively lock port /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00: [Errno 11] Resource temporarily unavailable
webhooks client 547987778480: Disconnected
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-311-g9e765dae'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sat Nov 18 20:34:01 2023 (1700368441.3 21.0)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[mcu adxl]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00

[adxl345]
cs_pin = adxl:gpio1
spi_bus = spi0a
axes_map = x,z,y

[resonance_tester]
accel_chip = adxl345
probe_points = 
	150,150, 20

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
Loaded MCU 'mcu' 105 commands (v0.11.0-105-g1e7057e9 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0=P0.28,P0.27 BUS_PINS_i2c1=P0.1,P0.0 BUS_PINS_i2c1a=P0.20,P0.19 BUS_PINS_i2c2=P0.11,P0.10 BUS_PINS_ssp0=P0.17,P0.18,P0.15 BUS_PINS_ssp1=P0.8,P0.9,P0.7 CLOCK_FREQ=120000000 MCU=lpc1769 PWM_MAX=255 RESERVE_PINS_USB=P0.30,P0.29,P2.9 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'adxl': Starting serial connect
Loaded MCU 'adxl' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'adxl' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'adxl' printer configuration...
Configured MCU 'adxl' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (0.0, 10.0)     | (27.0, 5.0)
  1   | (35.5, 10.0)    | (62.5, 5.0)
  2   | (71.0, 10.0)    | (98.0, 5.0)
  3   | (106.5, 10.0)   | (133.5, 5.0)
  4   | (142.0, 10.0)   | (169.0, 5.0)
  5   | (177.5, 10.0)   | (204.5, 5.0)
  6   | (213.0, 10.0)   | (240.0, 5.0)
  7   | (213.0, 58.8)   | (240.0, 53.8)
  8   | (177.5, 58.8)   | (204.5, 53.8)
  9   | (142.0, 58.8)   | (169.0, 53.8)
  10  | (106.5, 58.8)   | (133.5, 53.8)
  11  | (71.0, 58.8)    | (98.0, 53.8)
  12  | (35.5, 58.8)    | (62.5, 53.8)
  13  | (0.0, 58.8)     | (27.0, 53.8)
  14  | (0.0, 107.5)    | (27.0, 102.5)
  15  | (35.5, 107.5)   | (62.5, 102.5)
  16  | (71.0, 107.5)   | (98.0, 102.5)
  17  | (106.5, 107.5)  | (133.5, 102.5)
  18  | (142.0, 107.5)  | (169.0, 102.5)
  19  | (177.5, 107.5)  | (204.5, 102.5)
  20  | (213.0, 107.5)  | (240.0, 102.5)
  21  | (213.0, 156.2)  | (240.0, 151.2)
  22  | (177.5, 156.2)  | (204.5, 151.2)
  23  | (142.0, 156.2)  | (169.0, 151.2)
  24  | (106.5, 156.2)  | (133.5, 151.2)
  25  | (71.0, 156.2)   | (98.0, 151.2)
  26  | (35.5, 156.2)   | (62.5, 151.2)
  27  | (0.0, 156.2)    | (27.0, 151.2)
  28  | (0.0, 205.0)    | (27.0, 200.0)
  29  | (35.5, 205.0)   | (62.5, 200.0)
  30  | (71.0, 205.0)   | (98.0, 200.0)
  31  | (106.5, 205.0)  | (133.5, 200.0)
  32  | (142.0, 205.0)  | (169.0, 200.0)
  33  | (177.5, 205.0)  | (204.5, 200.0)
  34  | (213.0, 205.0)  | (240.0, 200.0)
Starting heater checks for extruder
Starting heater checks for heater_bed
webhooks client 548081687952: New connection
webhooks client 548081687952: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-311-g9e765dae'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sat Nov 18 20:35:21 2023 (1700368521.3 20.6)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = zv
shaper_freq_y = 51.0

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[mcu adxl]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00

[adxl345]
cs_pin = adxl:gpio1
spi_bus = spi0a
axes_map = x,z,y

[resonance_tester]
accel_chip = adxl345
probe_points = 
	150,150, 20

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
mcu 'mcu': got {'oid': 25, 'next_clock': 2423163520, 'value': 31083, '#name': 'analog_in_state', '#sent_time': 22.381417801, '#receive_time': 22.404611116}
mcu 'mcu': got {'oid': 17, 'next_clock': 2449563520, 'value': 30997, '#name': 'analog_in_state', '#sent_time': 22.588521523, '#receive_time': 22.624609634}
mcu 'mcu': got {'oid': 25, 'next_clock': 2459163520, 'value': 31078, '#name': 'analog_in_state', '#sent_time': 22.691102116, '#receive_time': 22.704630542}
Loaded MCU 'mcu' 105 commands (v0.11.0-105-g1e7057e9 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0=P0.28,P0.27 BUS_PINS_i2c1=P0.1,P0.0 BUS_PINS_i2c1a=P0.20,P0.19 BUS_PINS_i2c2=P0.11,P0.10 BUS_PINS_ssp0=P0.17,P0.18,P0.15 BUS_PINS_ssp1=P0.8,P0.9,P0.7 CLOCK_FREQ=120000000 MCU=lpc1769 PWM_MAX=255 RESERVE_PINS_USB=P0.30,P0.29,P2.9 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'adxl': Starting serial connect
mcu 'mcu': got {'oid': 17, 'next_clock': 2485563520, 'value': 31000, '#name': 'analog_in_state', '#sent_time': 22.805460005, '#receive_time': 22.924642208}
mcu 'mcu': got {'oid': 25, 'next_clock': 2495163520, 'value': 31084, '#name': 'analog_in_state', '#sent_time': 22.805460005, '#receive_time': 23.004570838}
mcu 'mcu': got {'oid': 17, 'next_clock': 2521563520, 'value': 31000, '#name': 'analog_in_state', '#sent_time': 22.805460005, '#receive_time': 23.224610449}
mcu 'mcu': got {'oid': 25, 'next_clock': 2531163520, 'value': 31078, '#name': 'analog_in_state', '#sent_time': 22.805460005, '#receive_time': 23.304632615}
Loaded MCU 'adxl' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'adxl' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Configured MCU 'mcu' (1024 moves)
Sending MCU 'adxl' printer configuration...
Configured MCU 'adxl' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (0.0, 10.0)     | (27.0, 5.0)
  1   | (35.5, 10.0)    | (62.5, 5.0)
  2   | (71.0, 10.0)    | (98.0, 5.0)
  3   | (106.5, 10.0)   | (133.5, 5.0)
  4   | (142.0, 10.0)   | (169.0, 5.0)
  5   | (177.5, 10.0)   | (204.5, 5.0)
  6   | (213.0, 10.0)   | (240.0, 5.0)
  7   | (213.0, 58.8)   | (240.0, 53.8)
  8   | (177.5, 58.8)   | (204.5, 53.8)
  9   | (142.0, 58.8)   | (169.0, 53.8)
  10  | (106.5, 58.8)   | (133.5, 53.8)
  11  | (71.0, 58.8)    | (98.0, 53.8)
  12  | (35.5, 58.8)    | (62.5, 53.8)
  13  | (0.0, 58.8)     | (27.0, 53.8)
  14  | (0.0, 107.5)    | (27.0, 102.5)
  15  | (35.5, 107.5)   | (62.5, 102.5)
  16  | (71.0, 107.5)   | (98.0, 102.5)
  17  | (106.5, 107.5)  | (133.5, 102.5)
  18  | (142.0, 107.5)  | (169.0, 102.5)
  19  | (177.5, 107.5)  | (204.5, 102.5)
  20  | (213.0, 107.5)  | (240.0, 102.5)
  21  | (213.0, 156.2)  | (240.0, 151.2)
  22  | (177.5, 156.2)  | (204.5, 151.2)
  23  | (142.0, 156.2)  | (169.0, 151.2)
  24  | (106.5, 156.2)  | (133.5, 151.2)
  25  | (71.0, 156.2)   | (98.0, 151.2)
  26  | (35.5, 156.2)   | (62.5, 151.2)
  27  | (0.0, 156.2)    | (27.0, 151.2)
  28  | (0.0, 205.0)    | (27.0, 200.0)
  29  | (35.5, 205.0)   | (62.5, 200.0)
  30  | (71.0, 205.0)   | (98.0, 200.0)
  31  | (106.5, 205.0)  | (133.5, 200.0)
  32  | (142.0, 205.0)  | (169.0, 200.0)
  33  | (177.5, 205.0)  | (204.5, 200.0)
  34  | (213.0, 205.0)  | (240.0, 200.0)
Starting heater checks for extruder
Starting heater checks for heater_bed
webhooks client 547753956064: New connection
webhooks client 547753956064: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
webhooks: registering remote method 'shutdown_machine' for connection id: 547753956064
webhooks: registering remote method 'reboot_machine' for connection id: 547753956064
webhooks: registering remote method 'pause_job_queue' for connection id: 547753956064
webhooks: registering remote method 'start_job_queue' for connection id: 547753956064
webhooks: registering remote method 'publish_mqtt_topic' for connection id: 547753956064
webhooks: registering remote method 'set_device_power' for connection id: 547753956064
webhooks: registering remote method 'notify' for connection id: 547753956064
webhooks: registering remote method 'timelapse_newframe' for connection id: 547753956064
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 547753956064
webhooks: registering remote method 'timelapse_render' for connection id: 547753956064
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:zv shaper_freq_y:51.000 damping_ratio_y:0.100000
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 80 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 80 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:zv shaper_freq_y:51.000 damping_ratio_y:0.100000
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:zv shaper_freq_y:51.000 damping_ratio_y:0.100000
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:zv shaper_freq_y:51.000 damping_ratio_y:0.100000
ADXL345 starting 'adxl345' measurements
Stats 76.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2920 bytes_read=12056 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993284 adxl: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000011 bytes_write=1314 bytes_read=14661 bytes_retransmit=9 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999894 adj=12000704 heater_bed: target=0 temp=29.2 pwm=0.000  sysload=0.90 cputime=3.689 memavail=7426580 print_time=253.175 buffer_time=0.755 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
accelerometer values (x, y, z): 814.226536, 9116.536426, 592.164754
Stats 77.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2926 bytes_read=12177 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993268 adxl: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000011 bytes_write=1390 bytes_read=33687 bytes_retransmit=9 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999890 adj=12000654 heater_bed: target=0 temp=29.1 pwm=0.000  sysload=0.90 cputime=3.846 memavail=7427008 print_time=255.500 buffer_time=2.079 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 78.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2938 bytes_read=12314 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993319 adxl: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000011 bytes_write=1466 bytes_read=52713 bytes_retransmit=9 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999888 adj=12000568 heater_bed: target=0 temp=29.1 pwm=0.000  sysload=0.90 cputime=4.024 memavail=7426740 print_time=255.500 buffer_time=1.078 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 79.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2944 bytes_read=12420 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993291 adxl: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000011 bytes_write=1542 bytes_read=71799 bytes_retransmit=9 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999899 adj=12000505 heater_bed: target=0 temp=29.1 pwm=0.000  sysload=0.90 cputime=4.158 memavail=7432152 print_time=255.500 buffer_time=0.078 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 80.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2950 bytes_read=12556 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993290 adxl: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000011 bytes_write=1571 bytes_read=90639 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999896 adj=12000618 heater_bed: target=0 temp=29.2 pwm=0.000  sysload=0.90 cputime=4.963 memavail=7411192 print_time=255.500 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
ADXL345 finished 'adxl345' measurements
Axes noise for xy-axis accelerometer: 88.780610 (x), 193.483536 (y), 99.474440 (z)
Stats 81.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2956 bytes_read=12676 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993289 adxl: mcu_awake=0.361 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1577 bytes_read=90672 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999892 adj=12000594 heater_bed: target=0 temp=29.2 pwm=0.000  sysload=0.83 cputime=5.005 memavail=7419524 print_time=255.500 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 82.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2962 bytes_read=12782 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993395 adxl: mcu_awake=0.361 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1583 bytes_read=90688 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999888 adj=12000543 heater_bed: target=0 temp=29.1 pwm=0.000  sysload=0.83 cputime=5.035 memavail=7415384 print_time=255.500 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 83.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2968 bytes_read=12918 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993364 adxl: mcu_awake=0.361 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1589 bytes_read=90704 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999884 adj=12000388 heater_bed: target=0 temp=29.1 pwm=0.000  sysload=0.83 cputime=5.064 memavail=7412864 print_time=255.500 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 84.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2974 bytes_read=13024 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993333 adxl: mcu_awake=0.361 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1595 bytes_read=90720 bytes_retransmit=9 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999890 adj=12000423 heater_bed: target=0 temp=29.1 pwm=0.000  sysload=0.83 cputime=5.091 memavail=7413352 print_time=255.500 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 85.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=3836 bytes_read=13610 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993319 adxl: mcu_awake=0.361 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1601 bytes_read=90736 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999886 adj=12000547 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.83 cputime=5.194 memavail=7419620 print_time=262.161 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
TMC 'stepper_z' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z1' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z' reports GSTAT:      00000000
TMC 'stepper_z1' reports GSTAT:      00000000
TMC 'stepper_x' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_x' reports GSTAT:      00000000
Stats 86.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=4820 bytes_read=14750 bytes_retransmit=9 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993594 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1607 bytes_read=90763 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999883 adj=12000527 heater_bed: target=0 temp=29.1 pwm=0.000  sysload=0.92 cputime=5.332 memavail=7415028 print_time=262.661 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
TMC 'stepper_y' reports GSTAT:      00000001 reset=1(Reset)
Stats 87.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=5955 bytes_read=15935 bytes_retransmit=9 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993545 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1613 bytes_read=90779 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999879 adj=12000172 heater_bed: target=0 temp=29.1 pwm=0.000  sysload=0.92 cputime=5.472 memavail=7415524 print_time=263.676 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
TMC 'stepper_y' reports GSTAT:      00000000
Stats 88.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=6971 bytes_read=16676 bytes_retransmit=9 bytes_invalid=0 send_seq=487 receive_seq=487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=26 freq=119993500 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1619 bytes_read=90795 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999888 adj=12000278 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.92 cputime=5.571 memavail=7418456 print_time=265.634 buffer_time=1.163 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 89.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7140 bytes_read=16996 bytes_retransmit=9 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993461 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1625 bytes_read=90811 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999885 adj=12000547 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.92 cputime=5.615 memavail=7423684 print_time=265.634 buffer_time=0.163 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 90.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7404 bytes_read=17467 bytes_retransmit=9 bytes_invalid=0 send_seq=518 receive_seq=518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=26 freq=119993432 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1631 bytes_read=90827 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999881 adj=12000555 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.92 cputime=5.673 memavail=7421828 print_time=267.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 91.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=7777 bytes_read=17807 bytes_retransmit=9 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993404 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1637 bytes_read=90854 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999879 adj=12000543 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.85 cputime=5.719 memavail=7423912 print_time=267.678 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 92.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=8414 bytes_read=18387 bytes_retransmit=9 bytes_invalid=0 send_seq=567 receive_seq=567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993377 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1643 bytes_read=90870 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999881 adj=12000548 heater_bed: target=0 temp=29.1 pwm=0.000  sysload=0.85 cputime=5.801 memavail=7422972 print_time=268.678 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 93.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=9047 bytes_read=18942 bytes_retransmit=9 bytes_invalid=0 send_seq=601 receive_seq=601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993350 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1649 bytes_read=90886 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999879 adj=12000599 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.85 cputime=5.881 memavail=7422748 print_time=269.678 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 94.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=9920 bytes_read=19532 bytes_retransmit=9 bytes_invalid=0 send_seq=638 receive_seq=638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993333 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1655 bytes_read=90902 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999877 adj=12000594 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.85 cputime=5.954 memavail=7421852 print_time=270.778 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 95.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=10688 bytes_read=20185 bytes_retransmit=9 bytes_invalid=0 send_seq=676 receive_seq=676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=119993324 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1661 bytes_read=90918 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999875 adj=12000576 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.85 cputime=6.034 memavail=7420684 print_time=271.570 buffer_time=0.095 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 96.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=11941 bytes_read=20738 bytes_retransmit=9 bytes_invalid=0 send_seq=711 receive_seq=711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=119993307 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1667 bytes_read=90945 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000556 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.86 cputime=6.091 memavail=7422928 print_time=274.443 buffer_time=1.968 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 97.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=12113 bytes_read=21028 bytes_retransmit=9 bytes_invalid=0 send_seq=720 receive_seq=720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993286 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1673 bytes_read=90961 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000554 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.86 cputime=6.129 memavail=7422452 print_time=274.443 buffer_time=0.967 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 98.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=12231 bytes_read=21348 bytes_retransmit=9 bytes_invalid=0 send_seq=729 receive_seq=729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993275 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1679 bytes_read=90977 bytes_retransmit=9 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000560 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.86 cputime=6.173 memavail=7422228 print_time=274.443 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
ADXL345 starting 'adxl345' measurements
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 10000.000000
square_corner_velocity: 5.000000
Disabled [input_shaper] for resonance testing
Testing frequency 5 Hz
Testing frequency 6 Hz
Testing frequency 7 Hz
Testing frequency 8 Hz
Testing frequency 9 Hz
Stats 99.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=19073 bytes_read=22183 bytes_retransmit=9 bytes_invalid=0 send_seq=847 receive_seq=847 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993331 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1873 bytes_read=107480 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000571 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.86 cputime=6.429 memavail=7422016 print_time=279.279 buffer_time=3.802 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 100.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=19191 bytes_read=22488 bytes_retransmit=9 bytes_invalid=0 send_seq=856 receive_seq=856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993312 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1949 bytes_read=126566 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000498 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.86 cputime=6.636 memavail=7421568 print_time=279.279 buffer_time=2.801 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 101.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=20230 bytes_read=22883 bytes_retransmit=9 bytes_invalid=0 send_seq=880 receive_seq=880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993292 adxl: mcu_awake=0.215 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2025 bytes_read=145608 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000501 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.79 cputime=6.861 memavail=7421344 print_time=279.767 buffer_time=2.289 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Testing frequency 10 Hz
Stats 102.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=22494 bytes_read=23343 bytes_retransmit=9 bytes_invalid=0 send_seq=923 receive_seq=923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993275 adxl: mcu_awake=0.215 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2101 bytes_read=164574 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000535 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.79 cputime=7.070 memavail=7421120 print_time=280.816 buffer_time=2.338 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 11 Hz
Stats 103.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=24687 bytes_read=23813 bytes_retransmit=9 bytes_invalid=0 send_seq=965 receive_seq=965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993269 adxl: mcu_awake=0.215 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2177 bytes_read=183600 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000534 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.79 cputime=7.309 memavail=7419928 print_time=281.792 buffer_time=2.313 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 12 Hz
Stats 104.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=27204 bytes_read=24308 bytes_retransmit=9 bytes_invalid=0 send_seq=1012 receive_seq=1012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993269 adxl: mcu_awake=0.215 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2253 bytes_read=202686 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000526 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.79 cputime=7.558 memavail=7421668 print_time=282.851 buffer_time=2.372 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 13 Hz
Stats 105.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=29637 bytes_read=24783 bytes_retransmit=9 bytes_invalid=0 send_seq=1058 receive_seq=1058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119993278 adxl: mcu_awake=0.215 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2329 bytes_read=221712 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000518 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.79 cputime=7.786 memavail=7420456 print_time=283.846 buffer_time=2.366 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 14 Hz
Stats 106.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=32324 bytes_read=25309 bytes_retransmit=9 bytes_invalid=0 send_seq=1108 receive_seq=1108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119993269 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2405 bytes_read=240815 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000500 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.73 cputime=8.010 memavail=7419756 print_time=284.876 buffer_time=2.390 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 15 Hz
Stats 107.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=34970 bytes_read=25814 bytes_retransmit=9 bytes_invalid=0 send_seq=1157 receive_seq=1157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993265 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2474 bytes_read=259878 bytes_retransmit=9 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000508 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.73 cputime=8.240 memavail=7418560 print_time=285.854 buffer_time=2.367 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 16 Hz
Stats 108.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=37722 bytes_read=26314 bytes_retransmit=9 bytes_invalid=0 send_seq=1208 receive_seq=1208 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119993351 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2550 bytes_read=278844 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000507 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.73 cputime=8.483 memavail=7417612 print_time=286.879 buffer_time=2.392 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 17 Hz
Stats 109.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=40578 bytes_read=26839 bytes_retransmit=9 bytes_invalid=0 send_seq=1261 receive_seq=1261 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993332 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2626 bytes_read=297930 bytes_retransmit=9 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000422 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.73 cputime=8.735 memavail=7416212 print_time=287.888 buffer_time=2.400 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 18 Hz
Stats 110.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=43392 bytes_read=27346 bytes_retransmit=9 bytes_invalid=0 send_seq=1312 receive_seq=1312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119993316 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2702 bytes_read=317016 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000450 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.73 cputime=9.002 memavail=7415456 print_time=288.895 buffer_time=2.406 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 19 Hz
Stats 111.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=46608 bytes_read=27890 bytes_retransmit=9 bytes_invalid=0 send_seq=1370 receive_seq=1370 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119993307 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2778 bytes_read=335999 bytes_retransmit=9 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000489 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.75 cputime=9.248 memavail=7414480 print_time=289.902 buffer_time=2.412 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 20 Hz
Stats 112.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=49474 bytes_read=28407 bytes_retransmit=9 bytes_invalid=0 send_seq=1422 receive_seq=1422 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119993351 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2854 bytes_read=355025 bytes_retransmit=9 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000535 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.75 cputime=9.501 memavail=7415796 print_time=290.920 buffer_time=2.429 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 21 Hz
Stats 113.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=52655 bytes_read=28952 bytes_retransmit=9 bytes_invalid=0 send_seq=1479 receive_seq=1479 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119993331 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2930 bytes_read=374111 bytes_retransmit=9 bytes_invalid=0 send_seq=410 receive_seq=410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000483 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.75 cputime=9.754 memavail=7414872 print_time=291.925 buffer_time=2.434 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 22 Hz
Stats 114.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=55900 bytes_read=29487 bytes_retransmit=9 bytes_invalid=0 send_seq=1537 receive_seq=1537 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993310 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3006 bytes_read=393137 bytes_retransmit=9 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000506 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.75 cputime=10.007 memavail=7413864 print_time=292.918 buffer_time=2.427 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 23 Hz
Stats 115.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=59034 bytes_read=30027 bytes_retransmit=9 bytes_invalid=0 send_seq=1593 receive_seq=1593 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993292 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3082 bytes_read=412163 bytes_retransmit=9 bytes_invalid=0 send_seq=432 receive_seq=432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000522 heater_bed: target=0 temp=29.0 pwm=0.000  sysload=0.75 cputime=10.250 memavail=7412160 print_time=293.922 buffer_time=2.431 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 24 Hz
Stats 116.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=62623 bytes_read=30618 bytes_retransmit=9 bytes_invalid=0 send_seq=1656 receive_seq=1656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119993277 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3158 bytes_read=431206 bytes_retransmit=9 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000595 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.69 cputime=10.486 memavail=7410732 print_time=294.937 buffer_time=2.444 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 25 Hz
Stats 117.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=66040 bytes_read=31173 bytes_retransmit=9 bytes_invalid=0 send_seq=1718 receive_seq=1718 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993340 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3234 bytes_read=450232 bytes_retransmit=9 bytes_invalid=0 send_seq=454 receive_seq=454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000588 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.69 cputime=10.729 memavail=7410236 print_time=295.930 buffer_time=2.437 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 26 Hz
Stats 118.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=69393 bytes_read=31733 bytes_retransmit=9 bytes_invalid=0 send_seq=1778 receive_seq=1778 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993321 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3310 bytes_read=469258 bytes_retransmit=9 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000506 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.69 cputime=10.975 memavail=7409256 print_time=296.934 buffer_time=2.439 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 27 Hz
Stats 119.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=72996 bytes_read=32308 bytes_retransmit=9 bytes_invalid=0 send_seq=1841 receive_seq=1841 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119993310 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3379 bytes_read=488261 bytes_retransmit=9 bytes_invalid=0 send_seq=475 receive_seq=475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000520 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.69 cputime=11.201 memavail=7408088 print_time=297.946 buffer_time=2.451 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 28 Hz
Stats 120.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=76798 bytes_read=32888 bytes_retransmit=9 bytes_invalid=0 send_seq=1908 receive_seq=1908 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119993295 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3455 bytes_read=507287 bytes_retransmit=9 bytes_invalid=0 send_seq=486 receive_seq=486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000534 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.69 cputime=11.447 memavail=7407616 print_time=298.949 buffer_time=2.453 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 29 Hz
Stats 121.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=80165 bytes_read=33469 bytes_retransmit=9 bytes_invalid=0 send_seq=1969 receive_seq=1969 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119993287 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3531 bytes_read=526330 bytes_retransmit=9 bytes_invalid=0 send_seq=497 receive_seq=497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000603 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.64 cputime=11.706 memavail=7406640 print_time=299.951 buffer_time=2.455 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 30 Hz
Stats 122.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=83849 bytes_read=34054 bytes_retransmit=9 bytes_invalid=0 send_seq=2034 receive_seq=2034 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993273 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3607 bytes_read=545356 bytes_retransmit=9 bytes_invalid=0 send_seq=508 receive_seq=508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000590 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.64 cputime=11.955 memavail=7408496 print_time=300.945 buffer_time=2.449 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 31 Hz
Stats 123.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=87862 bytes_read=34649 bytes_retransmit=9 bytes_invalid=0 send_seq=2104 receive_seq=2104 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119993261 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3683 bytes_read=564382 bytes_retransmit=9 bytes_invalid=0 send_seq=519 receive_seq=519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000582 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.64 cputime=12.206 memavail=7407516 print_time=301.948 buffer_time=2.451 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 32 Hz
Stats 124.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=91654 bytes_read=35239 bytes_retransmit=9 bytes_invalid=0 send_seq=2170 receive_seq=2170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=348 freq=119993249 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3759 bytes_read=583408 bytes_retransmit=9 bytes_invalid=0 send_seq=530 receive_seq=530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000578 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.64 cputime=12.448 memavail=7406548 print_time=302.950 buffer_time=2.453 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 33 Hz
Stats 125.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=95706 bytes_read=35854 bytes_retransmit=9 bytes_invalid=0 send_seq=2241 receive_seq=2241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=440 freq=119993239 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3835 bytes_read=602434 bytes_retransmit=9 bytes_invalid=0 send_seq=541 receive_seq=541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000585 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.64 cputime=12.688 memavail=7404812 print_time=303.945 buffer_time=2.447 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 34 Hz
Stats 126.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=99967 bytes_read=36490 bytes_retransmit=9 bytes_invalid=0 send_seq=2316 receive_seq=2316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=61 freq=119993255 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3911 bytes_read=621537 bytes_retransmit=9 bytes_invalid=0 send_seq=552 receive_seq=552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000579 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.66 cputime=12.952 memavail=7403860 print_time=304.961 buffer_time=2.462 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 35 Hz
Stats 127.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=103771 bytes_read=37085 bytes_retransmit=9 bytes_invalid=0 send_seq=2383 receive_seq=2383 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119993245 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=3987 bytes_read=640503 bytes_retransmit=9 bytes_invalid=0 send_seq=563 receive_seq=563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000543 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.66 cputime=13.237 memavail=7402180 print_time=305.949 buffer_time=2.450 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 36 Hz
Stats 128.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=107710 bytes_read=37700 bytes_retransmit=9 bytes_invalid=0 send_seq=2454 receive_seq=2454 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993228 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=4063 bytes_read=659589 bytes_retransmit=9 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000547 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.66 cputime=13.433 memavail=7403736 print_time=306.964 buffer_time=2.465 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 37 Hz
Stats 129.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=111353 bytes_read=38275 bytes_retransmit=9 bytes_invalid=0 send_seq=2520 receive_seq=2520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=288 freq=119993215 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=4139 bytes_read=678615 bytes_retransmit=9 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000542 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.66 cputime=13.672 memavail=7402084 print_time=307.953 buffer_time=2.453 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 38 Hz
Stats 130.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=115191 bytes_read=38875 bytes_retransmit=9 bytes_invalid=0 send_seq=2588 receive_seq=2588 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=569 freq=119993212 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=4215 bytes_read=697641 bytes_retransmit=9 bytes_invalid=0 send_seq=596 receive_seq=596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000553 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.66 cputime=13.894 memavail=7403264 print_time=308.967 buffer_time=2.466 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 39 Hz
Stats 131.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=119150 bytes_read=39491 bytes_retransmit=9 bytes_invalid=0 send_seq=2656 receive_seq=2656 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=42 upcoming_bytes=1019 freq=119993238 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=4291 bytes_read=716684 bytes_retransmit=9 bytes_invalid=0 send_seq=607 receive_seq=607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000560 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.61 cputime=14.083 memavail=7401076 print_time=309.956 buffer_time=2.455 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 40 Hz
Stats 132.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=123343 bytes_read=40086 bytes_retransmit=9 bytes_invalid=0 send_seq=2726 receive_seq=2726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1812 freq=119993242 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=4360 bytes_read=735687 bytes_retransmit=9 bytes_invalid=0 send_seq=617 receive_seq=617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000526 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.61 cputime=14.323 memavail=7398948 print_time=310.970 buffer_time=2.468 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 41 Hz
Stats 133.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=127746 bytes_read=40726 bytes_retransmit=9 bytes_invalid=0 send_seq=2802 receive_seq=2802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=2403 freq=119993233 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=4436 bytes_read=754713 bytes_retransmit=9 bytes_invalid=0 send_seq=628 receive_seq=628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000517 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.61 cputime=14.604 memavail=7400400 print_time=311.971 buffer_time=2.468 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 42 Hz
Stats 134.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=133021 bytes_read=41441 bytes_retransmit=9 bytes_invalid=0 send_seq=2893 receive_seq=2893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=1355 freq=119993231 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=4512 bytes_read=773739 bytes_retransmit=9 bytes_invalid=0 send_seq=639 receive_seq=639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000527 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.61 cputime=14.912 memavail=7399000 print_time=312.972 buffer_time=2.469 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 43 Hz
Stats 135.1: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=138232 bytes_read=42151 bytes_retransmit=9 bytes_invalid=0 send_seq=2986 receive_seq=2986 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=502 freq=119993241 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=4588 bytes_read=792765 bytes_retransmit=9 bytes_invalid=0 send_seq=650 receive_seq=650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000572 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.61 cputime=15.182 memavail=7396856 print_time=313.973 buffer_time=2.469 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 44 Hz
Stats 136.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=142643 bytes_read=42812 bytes_retransmit=9 bytes_invalid=0 send_seq=3063 receive_seq=3063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=311 freq=119993237 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=4670 bytes_read=811824 bytes_retransmit=9 bytes_invalid=0 send_seq=662 receive_seq=662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000548 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.56 cputime=15.434 memavail=7396352 print_time=314.974 buffer_time=2.469 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 45 Hz
Stats 137.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=146673 bytes_read=43443 bytes_retransmit=9 bytes_invalid=0 send_seq=3135 receive_seq=3135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=478 freq=119993221 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=4746 bytes_read=830910 bytes_retransmit=9 bytes_invalid=0 send_seq=673 receive_seq=673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000533 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.56 cputime=15.689 memavail=7395400 print_time=315.964 buffer_time=2.459 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 46 Hz
Stats 138.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=150762 bytes_read=44043 bytes_retransmit=9 bytes_invalid=0 send_seq=3206 receive_seq=3206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=724 freq=119993324 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=4822 bytes_read=850077 bytes_retransmit=9 bytes_invalid=0 send_seq=684 receive_seq=684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000551 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.56 cputime=15.951 memavail=7397176 print_time=316.976 buffer_time=2.471 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 47 Hz
Stats 139.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=154916 bytes_read=44663 bytes_retransmit=9 bytes_invalid=0 send_seq=3278 receive_seq=3278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=882 freq=119993320 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=4898 bytes_read=869487 bytes_retransmit=9 bytes_invalid=0 send_seq=695 receive_seq=695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000448 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.56 cputime=16.219 memavail=7395056 print_time=317.966 buffer_time=2.460 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 48 Hz
Stats 140.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=159160 bytes_read=45283 bytes_retransmit=9 bytes_invalid=0 send_seq=3350 receive_seq=3350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1676 freq=119993313 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=4974 bytes_read=888836 bytes_retransmit=9 bytes_invalid=0 send_seq=706 receive_seq=706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000471 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.56 cputime=16.487 memavail=7394080 print_time=318.973 buffer_time=2.465 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 49 Hz
Stats 141.1: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=163435 bytes_read=45899 bytes_retransmit=9 bytes_invalid=0 send_seq=3421 receive_seq=3421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=2705 freq=119993301 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=5050 bytes_read=908202 bytes_retransmit=9 bytes_invalid=0 send_seq=717 receive_seq=717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000482 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.52 cputime=16.767 memavail=7392624 print_time=319.979 buffer_time=2.470 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 50 Hz
Stats 142.1: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=168040 bytes_read=46544 bytes_retransmit=9 bytes_invalid=0 send_seq=3498 receive_seq=3498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=3439 freq=119993311 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=5126 bytes_read=927551 bytes_retransmit=9 bytes_invalid=0 send_seq=728 receive_seq=728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000496 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.52 cputime=17.054 memavail=7391420 print_time=320.979 buffer_time=2.470 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 51 Hz
Stats 143.1: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=173324 bytes_read=47244 bytes_retransmit=9 bytes_invalid=0 send_seq=3586 receive_seq=3586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=3458 freq=119993322 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=5202 bytes_read=946961 bytes_retransmit=9 bytes_invalid=0 send_seq=739 receive_seq=739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000485 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.52 cputime=17.346 memavail=7390468 print_time=321.980 buffer_time=2.470 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 52 Hz
Stats 144.1: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=179015 bytes_read=47974 bytes_retransmit=9 bytes_invalid=0 send_seq=3683 receive_seq=3683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=3161 freq=119993309 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=5271 bytes_read=966286 bytes_retransmit=9 bytes_invalid=0 send_seq=749 receive_seq=749 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000488 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.52 cputime=17.653 memavail=7391564 print_time=322.981 buffer_time=2.469 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 53 Hz
Stats 145.1: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=184535 bytes_read=48693 bytes_retransmit=9 bytes_invalid=0 send_seq=3775 receive_seq=3775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=2728 freq=119993325 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=5347 bytes_read=985635 bytes_retransmit=9 bytes_invalid=0 send_seq=760 receive_seq=760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000501 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.52 cputime=17.965 memavail=7389608 print_time=323.977 buffer_time=2.464 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 54 Hz
Stats 146.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=189624 bytes_read=49406 bytes_retransmit=9 bytes_invalid=0 send_seq=3864 receive_seq=3864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2005 freq=119993316 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=5423 bytes_read=1005001 bytes_retransmit=9 bytes_invalid=0 send_seq=771 receive_seq=771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000485 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.47 cputime=18.251 memavail=7388632 print_time=324.982 buffer_time=2.470 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 55 Hz
Stats 147.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=195723 bytes_read=50184 bytes_retransmit=9 bytes_invalid=0 send_seq=3972 receive_seq=3972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=306 freq=119993309 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=5499 bytes_read=1024411 bytes_retransmit=9 bytes_invalid=0 send_seq=782 receive_seq=782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000500 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.47 cputime=18.544 memavail=7379840 print_time=325.974 buffer_time=2.460 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 56 Hz
Stats 148.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=199950 bytes_read=50834 bytes_retransmit=9 bytes_invalid=0 send_seq=4050 receive_seq=4050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=528 freq=119993362 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=5575 bytes_read=1043699 bytes_retransmit=9 bytes_invalid=0 send_seq=793 receive_seq=793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000507 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.47 cputime=18.784 memavail=7385880 print_time=326.983 buffer_time=2.469 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 57 Hz
Stats 149.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=204289 bytes_read=51494 bytes_retransmit=9 bytes_invalid=0 send_seq=4130 receive_seq=4130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=675 freq=119993342 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=5651 bytes_read=1063048 bytes_retransmit=9 bytes_invalid=0 send_seq=804 receive_seq=804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000476 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.47 cputime=18.985 memavail=7389208 print_time=327.984 buffer_time=2.470 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 58 Hz
Stats 150.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=208656 bytes_read=52139 bytes_retransmit=9 bytes_invalid=0 send_seq=4210 receive_seq=4210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=858 freq=119993323 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=5727 bytes_read=1082397 bytes_retransmit=9 bytes_invalid=0 send_seq=815 receive_seq=815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000499 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.47 cputime=19.185 memavail=7388620 print_time=328.984 buffer_time=2.470 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 59 Hz
Stats 151.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=213124 bytes_read=52820 bytes_retransmit=9 bytes_invalid=0 send_seq=4291 receive_seq=4291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=990 freq=119993312 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=5803 bytes_read=1101763 bytes_retransmit=9 bytes_invalid=0 send_seq=826 receive_seq=826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000517 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.52 cputime=19.391 memavail=7386292 print_time=329.977 buffer_time=2.461 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 60 Hz
Stats 152.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=217356 bytes_read=53455 bytes_retransmit=9 bytes_invalid=0 send_seq=4366 receive_seq=4366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=1960 freq=119993295 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=5879 bytes_read=1121173 bytes_retransmit=9 bytes_invalid=0 send_seq=837 receive_seq=837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000525 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.52 cputime=19.594 memavail=7387484 print_time=330.986 buffer_time=2.469 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 61 Hz
Stats 153.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=221577 bytes_read=54055 bytes_retransmit=9 bytes_invalid=0 send_seq=4437 receive_seq=4437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3106 freq=119993289 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=5948 bytes_read=1140498 bytes_retransmit=9 bytes_invalid=0 send_seq=847 receive_seq=847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000544 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.52 cputime=19.885 memavail=7385340 print_time=331.986 buffer_time=2.468 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 62 Hz
Stats 154.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=226351 bytes_read=54720 bytes_retransmit=9 bytes_invalid=0 send_seq=4518 receive_seq=4518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=3770 freq=119993281 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=6024 bytes_read=1159847 bytes_retransmit=9 bytes_invalid=0 send_seq=858 receive_seq=858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000549 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.52 cputime=20.169 memavail=7383688 print_time=332.987 buffer_time=2.468 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 63 Hz
Stats 155.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=231750 bytes_read=55435 bytes_retransmit=9 bytes_invalid=0 send_seq=4609 receive_seq=4609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=3960 freq=119993272 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=6100 bytes_read=1179257 bytes_retransmit=9 bytes_invalid=0 send_seq=869 receive_seq=869 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000555 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.52 cputime=20.431 memavail=7384744 print_time=333.987 buffer_time=2.467 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 64 Hz
Stats 156.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=237189 bytes_read=56156 bytes_retransmit=9 bytes_invalid=0 send_seq=4701 receive_seq=4701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=4160 freq=119993259 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=6176 bytes_read=1198562 bytes_retransmit=9 bytes_invalid=0 send_seq=880 receive_seq=880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999861 adj=12000555 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.48 cputime=20.667 memavail=7385604 print_time=334.987 buffer_time=2.467 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 65 Hz
Stats 157.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=242762 bytes_read=56886 bytes_retransmit=9 bytes_invalid=0 send_seq=4795 receive_seq=4795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=4344 freq=119993302 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=6252 bytes_read=1217972 bytes_retransmit=9 bytes_invalid=0 send_seq=891 receive_seq=891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000560 heater_bed: target=0 temp=28.9 pwm=0.000  sysload=0.48 cputime=20.874 memavail=7382584 print_time=335.988 buffer_time=2.467 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 66 Hz
Stats 158.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=248575 bytes_read=57636 bytes_retransmit=9 bytes_invalid=0 send_seq=4893 receive_seq=4893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=1687 freq=119993311 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=6328 bytes_read=1237870 bytes_retransmit=9 bytes_invalid=0 send_seq=902 receive_seq=902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000546 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.48 cputime=21.212 memavail=7382392 print_time=336.481 buffer_time=1.930 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 67 Hz
Stats 159.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=254347 bytes_read=58366 bytes_retransmit=9 bytes_invalid=0 send_seq=4990 receive_seq=4990 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=4560 freq=119993305 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=6404 bytes_read=1257219 bytes_retransmit=9 bytes_invalid=0 send_seq=913 receive_seq=913 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000529 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.48 cputime=21.503 memavail=7382776 print_time=337.985 buffer_time=2.434 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 68 Hz
Stats 160.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=260138 bytes_read=59111 bytes_retransmit=9 bytes_invalid=0 send_seq=5087 receive_seq=5087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=4760 freq=119993295 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=6480 bytes_read=1276568 bytes_retransmit=9 bytes_invalid=0 send_seq=924 receive_seq=924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000530 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.48 cputime=21.784 memavail=7379984 print_time=338.986 buffer_time=2.434 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 69 Hz
Stats 161.1: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=266042 bytes_read=59882 bytes_retransmit=9 bytes_invalid=0 send_seq=5186 receive_seq=5186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=4970 freq=119993300 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=6556 bytes_read=1295934 bytes_retransmit=9 bytes_invalid=0 send_seq=935 receive_seq=935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000537 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.52 cputime=22.084 memavail=7378504 print_time=339.990 buffer_time=2.438 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 70 Hz
Stats 162.1: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=272044 bytes_read=60632 bytes_retransmit=9 bytes_invalid=0 send_seq=5287 receive_seq=5287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=4876 freq=119993298 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=6632 bytes_read=1315283 bytes_retransmit=9 bytes_invalid=0 send_seq=946 receive_seq=946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000546 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.52 cputime=22.374 memavail=7379720 print_time=340.990 buffer_time=2.437 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 71 Hz
Stats 163.1: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=278448 bytes_read=61442 bytes_retransmit=9 bytes_invalid=0 send_seq=5397 receive_seq=5397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=3997 freq=119993285 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=6708 bytes_read=1334632 bytes_retransmit=9 bytes_invalid=0 send_seq=957 receive_seq=957 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000540 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.52 cputime=22.679 memavail=7378292 print_time=341.983 buffer_time=2.430 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 72 Hz
Stats 164.1: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=285075 bytes_read=62267 bytes_retransmit=9 bytes_invalid=0 send_seq=5510 receive_seq=5510 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=3287 freq=119993283 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=6784 bytes_read=1353981 bytes_retransmit=9 bytes_invalid=0 send_seq=968 receive_seq=968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000549 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.52 cputime=23.021 memavail=7379588 print_time=342.991 buffer_time=2.437 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 73 Hz
Stats 165.1: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=290277 bytes_read=62952 bytes_retransmit=9 bytes_invalid=0 send_seq=5598 receive_seq=5598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=4489 freq=119993280 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=6860 bytes_read=1373391 bytes_retransmit=9 bytes_invalid=0 send_seq=979 receive_seq=979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000548 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.52 cputime=23.335 memavail=7377192 print_time=343.991 buffer_time=2.437 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 74 Hz
Stats 166.1: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=295423 bytes_read=63683 bytes_retransmit=9 bytes_invalid=0 send_seq=5686 receive_seq=5686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=4547 freq=119993268 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=6936 bytes_read=1392879 bytes_retransmit=9 bytes_invalid=0 send_seq=990 receive_seq=990 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000547 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.64 cputime=23.640 memavail=7374644 print_time=344.991 buffer_time=2.428 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 75 Hz
Stats 167.1: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=302117 bytes_read=64513 bytes_retransmit=9 bytes_invalid=0 send_seq=5803 receive_seq=5803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2376 freq=119993259 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7012 bytes_read=1412289 bytes_retransmit=9 bytes_invalid=0 send_seq=1001 receive_seq=1001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000558 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.64 cputime=23.953 memavail=7375332 print_time=345.988 buffer_time=2.422 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 76 Hz
Stats 168.1: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=308620 bytes_read=65338 bytes_retransmit=9 bytes_invalid=0 send_seq=5919 receive_seq=5919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=504 freq=119993247 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7088 bytes_read=1431760 bytes_retransmit=9 bytes_invalid=0 send_seq=1012 receive_seq=1012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000562 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.64 cputime=24.268 memavail=7376020 print_time=346.992 buffer_time=2.419 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 77 Hz
Stats 169.1: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=312988 bytes_read=66008 bytes_retransmit=9 bytes_invalid=0 send_seq=5998 receive_seq=5998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=598 freq=119993243 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7157 bytes_read=1451085 bytes_retransmit=9 bytes_invalid=0 send_seq=1022 receive_seq=1022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000567 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.64 cputime=24.537 memavail=7376844 print_time=347.986 buffer_time=2.412 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 78 Hz
Stats 170.1: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=317382 bytes_read=66648 bytes_retransmit=9 bytes_invalid=0 send_seq=6077 receive_seq=6077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=747 freq=119993235 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7233 bytes_read=1470434 bytes_retransmit=9 bytes_invalid=0 send_seq=1033 receive_seq=1033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000568 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.64 cputime=24.805 memavail=7373836 print_time=348.993 buffer_time=2.418 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 79 Hz
Stats 171.1: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=321885 bytes_read=67309 bytes_retransmit=9 bytes_invalid=0 send_seq=6157 receive_seq=6157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=858 freq=119993310 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7309 bytes_read=1489800 bytes_retransmit=9 bytes_invalid=0 send_seq=1044 receive_seq=1044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000572 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.67 cputime=25.075 memavail=7374460 print_time=349.990 buffer_time=2.415 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 80 Hz
Stats 172.1: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=326393 bytes_read=67989 bytes_retransmit=9 bytes_invalid=0 send_seq=6238 receive_seq=6238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=979 freq=119993301 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7385 bytes_read=1509210 bytes_retransmit=9 bytes_invalid=0 send_seq=1055 receive_seq=1055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000530 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.67 cputime=25.349 memavail=7372336 print_time=350.993 buffer_time=2.417 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 81 Hz
Stats 173.1: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=330958 bytes_read=68644 bytes_retransmit=9 bytes_invalid=0 send_seq=6320 receive_seq=6320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=1085 freq=119993293 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7461 bytes_read=1528559 bytes_retransmit=9 bytes_invalid=0 send_seq=1066 receive_seq=1066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000533 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.67 cputime=25.641 memavail=7371384 print_time=351.987 buffer_time=2.410 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Testing frequency 82 Hz
Stats 174.1: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=335637 bytes_read=69324 bytes_retransmit=9 bytes_invalid=0 send_seq=6404 receive_seq=6404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1232 freq=119993286 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7537 bytes_read=1547908 bytes_retransmit=9 bytes_invalid=0 send_seq=1077 receive_seq=1077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000545 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.67 cputime=25.921 memavail=7372792 print_time=352.994 buffer_time=2.416 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 83 Hz
Stats 175.1: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=340316 bytes_read=70004 bytes_retransmit=9 bytes_invalid=0 send_seq=6488 receive_seq=6488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1352 freq=119993275 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7613 bytes_read=1567257 bytes_retransmit=9 bytes_invalid=0 send_seq=1088 receive_seq=1088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000551 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.67 cputime=26.200 memavail=7369336 print_time=353.994 buffer_time=2.416 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 84 Hz
Stats 176.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=345104 bytes_read=70685 bytes_retransmit=9 bytes_invalid=0 send_seq=6573 receive_seq=6572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1456 freq=119993268 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7689 bytes_read=1586623 bytes_retransmit=9 bytes_invalid=0 send_seq=1099 receive_seq=1099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000558 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.69 cputime=26.483 memavail=7371016 print_time=354.991 buffer_time=2.413 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 85 Hz
Stats 177.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=349897 bytes_read=71380 bytes_retransmit=9 bytes_invalid=0 send_seq=6659 receive_seq=6659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1570 freq=119993255 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7765 bytes_read=1605972 bytes_retransmit=9 bytes_invalid=0 send_seq=1110 receive_seq=1110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000562 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.69 cputime=26.783 memavail=7369484 print_time=355.989 buffer_time=2.409 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 86 Hz
Stats 178.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=354747 bytes_read=72075 bytes_retransmit=9 bytes_invalid=0 send_seq=6746 receive_seq=6746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1726 freq=119993251 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7841 bytes_read=1625321 bytes_retransmit=9 bytes_invalid=0 send_seq=1121 receive_seq=1121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000566 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.69 cputime=27.091 memavail=7368284 print_time=356.995 buffer_time=2.415 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 87 Hz
Stats 179.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=359711 bytes_read=72760 bytes_retransmit=9 bytes_invalid=0 send_seq=6835 receive_seq=6834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1837 freq=119993353 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7917 bytes_read=1644670 bytes_retransmit=9 bytes_invalid=0 send_seq=1132 receive_seq=1132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000564 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.69 cputime=27.368 memavail=7366632 print_time=357.995 buffer_time=2.415 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 88 Hz
Stats 180.1: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=364649 bytes_read=73470 bytes_retransmit=9 bytes_invalid=0 send_seq=6924 receive_seq=6924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1969 freq=119993392 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=7986 bytes_read=1663995 bytes_retransmit=9 bytes_invalid=0 send_seq=1142 receive_seq=1142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000449 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.69 cputime=27.637 memavail=7366444 print_time=358.995 buffer_time=2.415 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 89 Hz
Stats 181.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=369732 bytes_read=74202 bytes_retransmit=9 bytes_invalid=0 send_seq=7016 receive_seq=7016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2073 freq=119993435 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=8062 bytes_read=1683422 bytes_retransmit=9 bytes_invalid=0 send_seq=1153 receive_seq=1153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000437 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.88 cputime=27.884 memavail=7367036 print_time=359.993 buffer_time=2.412 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 90 Hz
Stats 182.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=374841 bytes_read=74900 bytes_retransmit=9 bytes_invalid=0 send_seq=7108 receive_seq=7108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2201 freq=119993416 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=8138 bytes_read=1702771 bytes_retransmit=9 bytes_invalid=0 send_seq=1164 receive_seq=1164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000430 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.88 cputime=28.146 memavail=7367396 print_time=360.996 buffer_time=2.414 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 91 Hz
Stats 183.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=379976 bytes_read=75614 bytes_retransmit=9 bytes_invalid=0 send_seq=7200 receive_seq=7200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=2307 freq=119993398 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=8214 bytes_read=1722120 bytes_retransmit=9 bytes_invalid=0 send_seq=1175 receive_seq=1175 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000457 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.88 cputime=28.400 memavail=7366008 print_time=361.990 buffer_time=2.408 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 92 Hz
Stats 184.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=385163 bytes_read=76334 bytes_retransmit=9 bytes_invalid=0 send_seq=7292 receive_seq=7292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2454 freq=119993378 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=8290 bytes_read=1741469 bytes_retransmit=9 bytes_invalid=0 send_seq=1186 receive_seq=1186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000485 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.88 cputime=28.641 memavail=7363012 print_time=362.996 buffer_time=2.413 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 93 Hz
Stats 185.1: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=390469 bytes_read=77054 bytes_retransmit=9 bytes_invalid=0 send_seq=7387 receive_seq=7387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2558 freq=119993373 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=8366 bytes_read=1760818 bytes_retransmit=9 bytes_invalid=0 send_seq=1197 receive_seq=1197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000512 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.88 cputime=28.928 memavail=7361140 print_time=363.994 buffer_time=2.409 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 94 Hz
Stats 186.1: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=395770 bytes_read=77800 bytes_retransmit=9 bytes_invalid=0 send_seq=7481 receive_seq=7481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=2695 freq=119993372 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=8442 bytes_read=1780245 bytes_retransmit=9 bytes_invalid=0 send_seq=1208 receive_seq=1208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000552 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.97 cputime=29.242 memavail=7361464 print_time=364.997 buffer_time=2.412 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 95 Hz
Stats 187.1: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=401190 bytes_read=78545 bytes_retransmit=9 bytes_invalid=0 send_seq=7578 receive_seq=7578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2792 freq=119993357 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=8518 bytes_read=1799594 bytes_retransmit=9 bytes_invalid=0 send_seq=1219 receive_seq=1219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000542 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.97 cputime=29.559 memavail=7360036 print_time=365.994 buffer_time=2.408 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 96 Hz
Stats 188.1: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=406584 bytes_read=79275 bytes_retransmit=9 bytes_invalid=0 send_seq=7675 receive_seq=7675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2941 freq=119993354 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=8594 bytes_read=1818882 bytes_retransmit=9 bytes_invalid=0 send_seq=1230 receive_seq=1230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000558 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.97 cputime=29.877 memavail=7359284 print_time=366.997 buffer_time=2.410 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 97 Hz
Stats 189.1: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=412092 bytes_read=80030 bytes_retransmit=9 bytes_invalid=0 send_seq=7774 receive_seq=7774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=3035 freq=119993341 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=8670 bytes_read=1838231 bytes_retransmit=9 bytes_invalid=0 send_seq=1241 receive_seq=1241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000549 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.97 cputime=30.179 memavail=7360780 print_time=367.995 buffer_time=2.408 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 98 Hz
Stats 190.2: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=417740 bytes_read=80790 bytes_retransmit=9 bytes_invalid=0 send_seq=7875 receive_seq=7874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=3120 freq=119993324 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=8746 bytes_read=1857824 bytes_retransmit=9 bytes_invalid=0 send_seq=1252 receive_seq=1252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000559 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.97 cputime=30.497 memavail=7358840 print_time=368.997 buffer_time=2.401 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 99 Hz
Stats 191.2: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=423326 bytes_read=81551 bytes_retransmit=9 bytes_invalid=0 send_seq=7974 receive_seq=7974 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=3260 freq=119993317 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=8822 bytes_read=1877190 bytes_retransmit=9 bytes_invalid=0 send_seq=1263 receive_seq=1263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000574 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.97 cputime=30.818 memavail=7356632 print_time=369.997 buffer_time=2.401 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 100 Hz
Stats 192.2: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=428995 bytes_read=82311 bytes_retransmit=9 bytes_invalid=0 send_seq=8074 receive_seq=8074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=3357 freq=119993310 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=8891 bytes_read=1896515 bytes_retransmit=9 bytes_invalid=0 send_seq=1273 receive_seq=1273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000570 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.97 cputime=31.130 memavail=7357752 print_time=370.995 buffer_time=2.398 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 101 Hz
Stats 193.2: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=434726 bytes_read=83081 bytes_retransmit=9 bytes_invalid=0 send_seq=8176 receive_seq=8176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=3468 freq=119993294 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=8967 bytes_read=1915864 bytes_retransmit=9 bytes_invalid=0 send_seq=1284 receive_seq=1284 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000566 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.97 cputime=31.542 memavail=7355100 print_time=371.993 buffer_time=2.395 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 102 Hz
Stats 194.2: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=440483 bytes_read=83836 bytes_retransmit=9 bytes_invalid=0 send_seq=8278 receive_seq=8278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=3975 freq=119993307 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=9043 bytes_read=1935213 bytes_retransmit=9 bytes_invalid=0 send_seq=1295 receive_seq=1295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000575 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.97 cputime=31.758 memavail=7355788 print_time=372.998 buffer_time=2.399 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 103 Hz
Stats 195.2: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=445875 bytes_read=84561 bytes_retransmit=9 bytes_invalid=0 send_seq=8371 receive_seq=8371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=5504 freq=119993291 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=9119 bytes_read=1954562 bytes_retransmit=9 bytes_invalid=0 send_seq=1306 receive_seq=1306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000586 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.97 cputime=32.003 memavail=7354480 print_time=373.998 buffer_time=2.399 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 104 Hz
Stats 196.2: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=451165 bytes_read=85287 bytes_retransmit=9 bytes_invalid=0 send_seq=8461 receive_seq=8461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=7192 freq=119993278 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=9195 bytes_read=1973928 bytes_retransmit=9 bytes_invalid=0 send_seq=1317 receive_seq=1317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000587 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.13 cputime=32.252 memavail=7352868 print_time=374.996 buffer_time=2.396 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 105 Hz
Stats 197.2: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=458215 bytes_read=86133 bytes_retransmit=9 bytes_invalid=0 send_seq=8579 receive_seq=8579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=7323 freq=119993290 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=9270 bytes_read=1993269 bytes_retransmit=9 bytes_invalid=0 send_seq=1328 receive_seq=1328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000600 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.13 cputime=32.497 memavail=7353172 print_time=375.994 buffer_time=2.393 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 106 Hz
Stats 198.2: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=465324 bytes_read=86988 bytes_retransmit=9 bytes_invalid=0 send_seq=8698 receive_seq=8698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=7488 freq=119993293 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=9346 bytes_read=2012679 bytes_retransmit=9 bytes_invalid=0 send_seq=1339 receive_seq=1339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000588 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=1.13 cputime=32.776 memavail=7351240 print_time=376.999 buffer_time=2.397 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 107 Hz
Stats 199.2: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=472509 bytes_read=87853 bytes_retransmit=9 bytes_invalid=0 send_seq=8819 receive_seq=8819 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=31 upcoming_bytes=7636 freq=119993281 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=9422 bytes_read=2032028 bytes_retransmit=9 bytes_invalid=0 send_seq=1350 receive_seq=1350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000570 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=1.13 cputime=33.022 memavail=7352676 print_time=377.999 buffer_time=2.397 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 108 Hz
Stats 200.2: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=479757 bytes_read=88708 bytes_retransmit=9 bytes_invalid=0 send_seq=8941 receive_seq=8941 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=7767 freq=119993265 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=9498 bytes_read=2051377 bytes_retransmit=9 bytes_invalid=0 send_seq=1361 receive_seq=1361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000574 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.13 cputime=33.256 memavail=7353488 print_time=378.999 buffer_time=2.396 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 109 Hz
Stats 201.2: gcodein=0  mcu: mcu_awake=0.036 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=487074 bytes_read=89594 bytes_retransmit=9 bytes_invalid=0 send_seq=9063 receive_seq=9063 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=24 upcoming_bytes=7891 freq=119993264 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=9574 bytes_read=2070743 bytes_retransmit=9 bytes_invalid=0 send_seq=1372 receive_seq=1372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000581 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.04 cputime=33.524 memavail=7350632 print_time=379.995 buffer_time=2.391 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 110 Hz
Stats 202.2: gcodein=0  mcu: mcu_awake=0.036 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=494473 bytes_read=90474 bytes_retransmit=9 bytes_invalid=0 send_seq=9187 receive_seq=9187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=8067 freq=119993260 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=9650 bytes_read=2090092 bytes_retransmit=9 bytes_invalid=0 send_seq=1383 receive_seq=1383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000567 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.04 cputime=33.746 memavail=7351524 print_time=380.999 buffer_time=2.395 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 111 Hz
Stats 203.2: gcodein=0  mcu: mcu_awake=0.036 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=501929 bytes_read=91344 bytes_retransmit=9 bytes_invalid=0 send_seq=9312 receive_seq=9312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=8096 freq=119993260 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=9726 bytes_read=2109441 bytes_retransmit=9 bytes_invalid=0 send_seq=1394 receive_seq=1394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000566 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.04 cputime=34.001 memavail=7352284 print_time=381.997 buffer_time=2.392 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 112 Hz
Stats 204.2: gcodein=0  mcu: mcu_awake=0.036 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=509457 bytes_read=92234 bytes_retransmit=9 bytes_invalid=0 send_seq=9439 receive_seq=9438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=7126 freq=119993253 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=9802 bytes_read=2128790 bytes_retransmit=9 bytes_invalid=0 send_seq=1405 receive_seq=1405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000617 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.04 cputime=34.345 memavail=7348972 print_time=383.000 buffer_time=2.394 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 113 Hz
Stats 205.2: gcodein=0  mcu: mcu_awake=0.036 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=517862 bytes_read=93239 bytes_retransmit=9 bytes_invalid=0 send_seq=9587 receive_seq=9587 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=5408 freq=119993241 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=9878 bytes_read=2148139 bytes_retransmit=9 bytes_invalid=0 send_seq=1416 receive_seq=1416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000605 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.04 cputime=34.594 memavail=7347528 print_time=384.000 buffer_time=2.393 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 114 Hz
Stats 206.2: gcodein=0  mcu: mcu_awake=0.039 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=524873 bytes_read=94120 bytes_retransmit=9 bytes_invalid=0 send_seq=9711 receive_seq=9711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=5028 freq=119993255 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=9947 bytes_read=2167542 bytes_retransmit=9 bytes_invalid=0 send_seq=1426 receive_seq=1426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999875 adj=12000604 heater_bed: target=0 temp=28.8 pwm=0.000  sysload=0.96 cputime=34.804 memavail=7345852 print_time=385.000 buffer_time=2.393 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 115 Hz
Stats 207.2: gcodein=0  mcu: mcu_awake=0.039 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=531348 bytes_read=94955 bytes_retransmit=9 bytes_invalid=0 send_seq=9826 receive_seq=9826 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=4769 freq=119993256 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=10023 bytes_read=2186830 bytes_retransmit=9 bytes_invalid=0 send_seq=1437 receive_seq=1437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000603 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.96 cputime=35.064 memavail=7344884 print_time=386.000 buffer_time=2.393 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 116 Hz
Stats 208.2: gcodein=0  mcu: mcu_awake=0.039 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=537387 bytes_read=95730 bytes_retransmit=9 bytes_invalid=0 send_seq=9929 receive_seq=9929 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=5190 freq=119993244 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=10099 bytes_read=2206240 bytes_retransmit=9 bytes_invalid=0 send_seq=1448 receive_seq=1448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000583 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=0.96 cputime=35.292 memavail=7346000 print_time=386.998 buffer_time=2.390 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 117 Hz
Stats 209.2: gcodein=0  mcu: mcu_awake=0.039 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=543949 bytes_read=96550 bytes_retransmit=9 bytes_invalid=0 send_seq=10044 receive_seq=10044 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=42 upcoming_bytes=5375 freq=119993251 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=10175 bytes_read=2225589 bytes_retransmit=9 bytes_invalid=0 send_seq=1459 receive_seq=1459 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000589 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.96 cputime=35.600 memavail=7343708 print_time=387.996 buffer_time=2.388 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 118 Hz
Stats 210.2: gcodein=0  mcu: mcu_awake=0.039 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=550675 bytes_read=97405 bytes_retransmit=9 bytes_invalid=0 send_seq=10163 receive_seq=10163 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=9 upcoming_bytes=5772 freq=119993240 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=10251 bytes_read=2244938 bytes_retransmit=9 bytes_invalid=0 send_seq=1470 receive_seq=1470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000566 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.96 cputime=35.922 memavail=7342008 print_time=389.000 buffer_time=2.391 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 119 Hz
Stats 211.2: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=557206 bytes_read=98251 bytes_retransmit=9 bytes_invalid=0 send_seq=10277 receive_seq=10277 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=7288 freq=119993235 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=10327 bytes_read=2264304 bytes_retransmit=9 bytes_invalid=0 send_seq=1481 receive_seq=1481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000583 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.96 cputime=36.193 memavail=7343688 print_time=390.000 buffer_time=2.391 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 120 Hz
Stats 212.2: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=563217 bytes_read=99006 bytes_retransmit=9 bytes_invalid=0 send_seq=10379 receive_seq=10379 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=52 upcoming_bytes=9262 freq=119993238 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=10403 bytes_read=2283653 bytes_retransmit=9 bytes_invalid=0 send_seq=1492 receive_seq=1492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000577 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.96 cputime=36.426 memavail=7342232 print_time=391.001 buffer_time=2.391 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 121 Hz
Stats 213.2: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=571096 bytes_read=99921 bytes_retransmit=9 bytes_invalid=0 send_seq=10510 receive_seq=10510 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=55 upcoming_bytes=6901 freq=119993242 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=10479 bytes_read=2303002 bytes_retransmit=9 bytes_invalid=0 send_seq=1503 receive_seq=1503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000568 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=0.96 cputime=36.661 memavail=7343168 print_time=391.997 buffer_time=2.386 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 122 Hz
Stats 214.2: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=579731 bytes_read=100896 bytes_retransmit=9 bytes_invalid=0 send_seq=10653 receive_seq=10653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3267 freq=119993232 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=10555 bytes_read=2322351 bytes_retransmit=9 bytes_invalid=0 send_seq=1514 receive_seq=1514 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000552 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=0.96 cputime=36.936 memavail=7342928 print_time=392.999 buffer_time=2.388 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Testing frequency 123 Hz
Stats 215.2: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=586691 bytes_read=101721 bytes_retransmit=9 bytes_invalid=0 send_seq=10769 receive_seq=10769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=1115 freq=119993227 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=10631 bytes_read=2341700 bytes_retransmit=9 bytes_invalid=0 send_seq=1525 receive_seq=1525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000555 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=0.96 cputime=37.217 memavail=7339628 print_time=394.001 buffer_time=2.390 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 124 Hz
Stats 216.2: gcodein=0  mcu: mcu_awake=0.035 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=591285 bytes_read=102377 bytes_retransmit=9 bytes_invalid=0 send_seq=10845 receive_seq=10845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1200 freq=119993226 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=10707 bytes_read=2361066 bytes_retransmit=9 bytes_invalid=0 send_seq=1536 receive_seq=1536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000552 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.05 cputime=37.498 memavail=7339980 print_time=395.001 buffer_time=2.389 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 125 Hz
Stats 217.2: gcodein=0  mcu: mcu_awake=0.035 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=595915 bytes_read=103015 bytes_retransmit=9 bytes_invalid=0 send_seq=10922 receive_seq=10922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=1251 freq=119993226 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=10776 bytes_read=2380391 bytes_retransmit=9 bytes_invalid=0 send_seq=1546 receive_seq=1546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000568 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.05 cputime=37.781 memavail=7340496 print_time=395.997 buffer_time=2.384 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 126 Hz
Stats 218.2: gcodein=0  mcu: mcu_awake=0.035 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=600621 bytes_read=103643 bytes_retransmit=9 bytes_invalid=0 send_seq=11000 receive_seq=11000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1346 freq=119993222 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=10852 bytes_read=2399801 bytes_retransmit=9 bytes_invalid=0 send_seq=1557 receive_seq=1557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000556 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.05 cputime=38.061 memavail=7340752 print_time=397.001 buffer_time=2.387 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 127 Hz
Stats 219.2: gcodein=0  mcu: mcu_awake=0.035 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=605329 bytes_read=104294 bytes_retransmit=9 bytes_invalid=0 send_seq=11079 receive_seq=11079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=1414 freq=119993216 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=10928 bytes_read=2419150 bytes_retransmit=9 bytes_invalid=0 send_seq=1568 receive_seq=1568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000552 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.05 cputime=38.304 memavail=7338684 print_time=397.999 buffer_time=2.385 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 128 Hz
Stats 220.2: gcodein=0  mcu: mcu_awake=0.035 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=610098 bytes_read=104959 bytes_retransmit=9 bytes_invalid=0 send_seq=11160 receive_seq=11160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=1506 freq=119993205 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=11004 bytes_read=2438499 bytes_retransmit=9 bytes_invalid=0 send_seq=1579 receive_seq=1579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000550 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.05 cputime=38.510 memavail=7338568 print_time=398.999 buffer_time=2.384 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 129 Hz
Stats 221.2: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=614877 bytes_read=105625 bytes_retransmit=9 bytes_invalid=0 send_seq=11241 receive_seq=11241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=1574 freq=119993196 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=11080 bytes_read=2457865 bytes_retransmit=9 bytes_invalid=0 send_seq=1590 receive_seq=1590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000552 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.20 cputime=38.755 memavail=7338252 print_time=400.000 buffer_time=2.384 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Testing frequency 130 Hz
Stats 222.2: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=619678 bytes_read=106285 bytes_retransmit=9 bytes_invalid=0 send_seq=11321 receive_seq=11321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=1659 freq=119993192 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=11156 bytes_read=2477214 bytes_retransmit=9 bytes_invalid=0 send_seq=1601 receive_seq=1601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000555 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.20 cputime=38.996 memavail=7336852 print_time=401.000 buffer_time=2.384 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Testing frequency 131 Hz
Stats 223.2: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=624566 bytes_read=106950 bytes_retransmit=9 bytes_invalid=0 send_seq=11402 receive_seq=11402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=1727 freq=119993192 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=11232 bytes_read=2496563 bytes_retransmit=9 bytes_invalid=0 send_seq=1612 receive_seq=1612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000561 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.20 cputime=39.244 memavail=7337936 print_time=402.000 buffer_time=2.383 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 132 Hz
Stats 224.2: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=629440 bytes_read=107600 bytes_retransmit=9 bytes_invalid=0 send_seq=11483 receive_seq=11483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=1819 freq=119993192 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=11301 bytes_read=2515888 bytes_retransmit=9 bytes_invalid=0 send_seq=1622 receive_seq=1622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000555 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.20 cputime=39.621 memavail=7335568 print_time=403.002 buffer_time=2.385 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Testing frequency 133 Hz
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 5.000000
Re-enabled [input_shaper]
Stats 225.2: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=634409 bytes_read=108275 bytes_retransmit=9 bytes_invalid=0 send_seq=11566 receive_seq=11566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=299 freq=119993183 adxl: mcu_awake=0.417 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=11377 bytes_read=2535237 bytes_retransmit=9 bytes_invalid=0 send_seq=1633 receive_seq=1633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000584 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.20 cputime=39.849 memavail=7334988 print_time=403.623 buffer_time=2.005 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 226.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=634860 bytes_read=108616 bytes_retransmit=9 bytes_invalid=0 send_seq=11579 receive_seq=11579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993177 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=11453 bytes_read=2554664 bytes_retransmit=9 bytes_invalid=0 send_seq=1644 receive_seq=1644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000586 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.11 cputime=40.053 memavail=7335188 print_time=403.623 buffer_time=1.002 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 227.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=634978 bytes_read=108906 bytes_retransmit=9 bytes_invalid=0 send_seq=11588 receive_seq=11588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993169 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=11529 bytes_read=2574013 bytes_retransmit=9 bytes_invalid=0 send_seq=1655 receive_seq=1655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000586 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.11 cputime=40.252 memavail=7333796 print_time=403.623 buffer_time=0.001 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
ADXL345 finished 'adxl345' measurements
Stats 228.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=635096 bytes_read=109211 bytes_retransmit=9 bytes_invalid=0 send_seq=11597 receive_seq=11597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993167 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=11551 bytes_read=2575155 bytes_retransmit=9 bytes_invalid=0 send_seq=1658 receive_seq=1658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000588 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.11 cputime=40.352 memavail=7240276 print_time=403.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 229.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=635214 bytes_read=109516 bytes_retransmit=9 bytes_invalid=0 send_seq=11606 receive_seq=11606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993164 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=11557 bytes_read=2575171 bytes_retransmit=9 bytes_invalid=0 send_seq=1659 receive_seq=1659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000579 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.11 cputime=40.427 memavail=7185608 print_time=403.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 230.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=635332 bytes_read=109806 bytes_retransmit=9 bytes_invalid=0 send_seq=11615 receive_seq=11615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993169 adxl: mcu_awake=0.418 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=11563 bytes_read=2575187 bytes_retransmit=9 bytes_invalid=0 send_seq=1660 receive_seq=1660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000570 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.11 cputime=40.486 memavail=7147184 print_time=403.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Calculating the best input shaper parameters for y axis
Stats 231.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=635450 bytes_read=110141 bytes_retransmit=9 bytes_invalid=0 send_seq=11624 receive_seq=11624 retransmit_seq=2 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993169 adxl: mcu_awake=0.125 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=11569 bytes_read=2575218 bytes_retransmit=9 bytes_invalid=0 send_seq=1661 receive_seq=1661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000553 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.26 cputime=40.808 memavail=7394308 print_time=403.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 232.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=635568 bytes_read=110446 bytes_retransmit=9 bytes_invalid=0 send_seq=11633 receive_seq=11633 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993163 adxl: mcu_awake=0.125 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=11575 bytes_read=2575234 bytes_retransmit=9 bytes_invalid=0 send_seq=1662 receive_seq=1662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000557 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.26 cputime=40.864 memavail=7384104 print_time=403.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Fitted shaper 'zv' frequency = 35.2 Hz (vibrations = 22.8%, smoothing ~= 0.126)
To avoid too much smoothing with 'zv', suggested max_accel <= 4700 mm/sec^2
Stats 233.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=635686 bytes_read=110751 bytes_retransmit=9 bytes_invalid=0 send_seq=11642 receive_seq=11642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993158 adxl: mcu_awake=0.125 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=11581 bytes_read=2575250 bytes_retransmit=9 bytes_invalid=0 send_seq=1663 receive_seq=1663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000560 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.26 cputime=40.939 memavail=7386928 print_time=403.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Fitted shaper 'mzv' frequency = 26.4 Hz (vibrations = 0.3%, smoothing ~= 0.292)
To avoid too much smoothing with 'mzv', suggested max_accel <= 2000 mm/sec^2
Stats 234.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=635804 bytes_read=111041 bytes_retransmit=9 bytes_invalid=0 send_seq=11651 receive_seq=11651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993154 adxl: mcu_awake=0.125 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=11587 bytes_read=2575266 bytes_retransmit=9 bytes_invalid=0 send_seq=1664 receive_seq=1664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000569 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.26 cputime=41.018 memavail=7390492 print_time=403.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 235.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=635922 bytes_read=111346 bytes_retransmit=9 bytes_invalid=0 send_seq=11660 receive_seq=11660 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993154 adxl: mcu_awake=0.125 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=11593 bytes_read=2575282 bytes_retransmit=9 bytes_invalid=0 send_seq=1665 receive_seq=1665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000563 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.24 cputime=41.093 memavail=7385380 print_time=403.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Fitted shaper 'ei' frequency = 34.2 Hz (vibrations = 2.1%, smoothing ~= 0.275)
To avoid too much smoothing with 'ei', suggested max_accel <= 2200 mm/sec^2
Stats 236.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=636040 bytes_read=111666 bytes_retransmit=9 bytes_invalid=0 send_seq=11669 receive_seq=11669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993151 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=11599 bytes_read=2575309 bytes_retransmit=9 bytes_invalid=0 send_seq=1666 receive_seq=1666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000574 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.24 cputime=41.196 memavail=7388028 print_time=403.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Fitted shaper '2hump_ei' frequency = 39.4 Hz (vibrations = 0.0%, smoothing ~= 0.348)
To avoid too much smoothing with '2hump_ei', suggested max_accel <= 1600 mm/sec^2
Stats 237.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=636158 bytes_read=111956 bytes_retransmit=9 bytes_invalid=0 send_seq=11678 receive_seq=11678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993151 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=11605 bytes_read=2575325 bytes_retransmit=9 bytes_invalid=0 send_seq=1667 receive_seq=1667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000569 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.24 cputime=41.266 memavail=7386720 print_time=403.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 238.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=636276 bytes_read=112261 bytes_retransmit=9 bytes_invalid=0 send_seq=11687 receive_seq=11687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993147 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=11611 bytes_read=2575341 bytes_retransmit=9 bytes_invalid=0 send_seq=1668 receive_seq=1668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000558 heater_bed: target=0 temp=28.5 pwm=0.000  sysload=1.24 cputime=41.318 memavail=7384148 print_time=403.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Fitted shaper '3hump_ei' frequency = 48.0 Hz (vibrations = 0.0%, smoothing ~= 0.356)
To avoid too much smoothing with '3hump_ei', suggested max_accel <= 1500 mm/sec^2
Recommended shaper_type_y = mzv, shaper_freq_y = 26.4 Hz
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:mzv shaper_freq_y:26.400 damping_ratio_y:0.100000
save_config: set [input_shaper] shaper_type_y = mzv
save_config: set [input_shaper] shaper_freq_y = 26.4
Shaper calibration data written to /tmp/calibration_data_y_20231118_203721.csv file
The SAVE_CONFIG command will update the printer config file
with these parameters and restart the printer.
Stats 239.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=636394 bytes_read=112566 bytes_retransmit=9 bytes_invalid=0 send_seq=11696 receive_seq=11696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993145 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=11617 bytes_read=2575357 bytes_retransmit=9 bytes_invalid=0 send_seq=1669 receive_seq=1669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000559 heater_bed: target=0 temp=28.7 pwm=0.000  sysload=1.24 cputime=41.371 memavail=7385792 print_time=403.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 240.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=636512 bytes_read=112856 bytes_retransmit=9 bytes_invalid=0 send_seq=11705 receive_seq=11705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993142 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=11623 bytes_read=2575373 bytes_retransmit=9 bytes_invalid=0 send_seq=1670 receive_seq=1670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000552 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.14 cputime=41.412 memavail=7383752 print_time=403.623 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
SAVE_CONFIG to '/home/pi/printer_data/config/printer.cfg' (backup in '/home/pi/printer_data/config/printer-20231118_203946.cfg')
Stats 241.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=636662 bytes_read=113176 bytes_retransmit=9 bytes_invalid=0 send_seq=11714 receive_seq=11714 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993203 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=11629 bytes_read=2575400 bytes_retransmit=9 bytes_invalid=0 send_seq=1671 receive_seq=1671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999875 adj=12000595 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=1.14 cputime=41.542 memavail=7393132 print_time=418.243 buffer_time=0.402 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
webhooks client 547753956064: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:39:48 2023 (1700368788.9 243.0)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 52.4
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[mcu adxl]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00

[adxl345]
cs_pin = adxl:gpio1
spi_bus = spi0a
axes_map = x,z,y

[resonance_tester]
accel_chip = adxl345
probe_points = 
	150,150, 20

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547755010704: New connection
webhooks client 547755010704: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
mcu 'mcu': got {'oid': 25, 'next_clock': 3257359744, 'value': 31116, '#name': 'analog_in_state', '#sent_time': 244.116183854, '#receive_time': 244.116930095}
mcu 'mcu': got {'oid': 17, 'next_clock': 3283759744, 'value': 31049, '#name': 'analog_in_state', '#sent_time': 244.323809965, '#receive_time': 244.337048317}
mcu 'mcu': got {'oid': 25, 'next_clock': 3293359744, 'value': 31112, '#name': 'analog_in_state', '#sent_time': 244.375462539, '#receive_time': 244.417093224}
Loaded MCU 'mcu' 105 commands (v0.11.0-105-g1e7057e9 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0=P0.28,P0.27 BUS_PINS_i2c1=P0.1,P0.0 BUS_PINS_i2c1a=P0.20,P0.19 BUS_PINS_i2c2=P0.11,P0.10 BUS_PINS_ssp0=P0.17,P0.18,P0.15 BUS_PINS_ssp1=P0.8,P0.9,P0.7 CLOCK_FREQ=120000000 MCU=lpc1769 PWM_MAX=255 RESERVE_PINS_USB=P0.30,P0.29,P2.9 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'adxl': Starting serial connect
mcu 'mcu': got {'oid': 17, 'next_clock': 3319759744, 'value': 31048, '#name': 'analog_in_state', '#sent_time': 244.550795743, '#receive_time': 244.637075817}
mcu 'mcu': got {'oid': 25, 'next_clock': 3329359744, 'value': 31114, '#name': 'analog_in_state', '#sent_time': 244.550795743, '#receive_time': 244.717098391}
mcu 'mcu': got {'oid': 17, 'next_clock': 3355759744, 'value': 31044, '#name': 'analog_in_state', '#sent_time': 244.550795743, '#receive_time': 244.93771102}
mcu 'mcu': got {'oid': 25, 'next_clock': 3365359744, 'value': 31117, '#name': 'analog_in_state', '#sent_time': 244.550795743, '#receive_time': 245.019645446}
mcu 'mcu': got {'oid': 17, 'next_clock': 3391759744, 'value': 31045, '#name': 'analog_in_state', '#sent_time': 244.550795743, '#receive_time': 245.237028242}
Loaded MCU 'adxl' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'adxl' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Configured MCU 'mcu' (1024 moves)
Configured MCU 'adxl' (1024 moves)
mcu 'adxl': got {'oid': 1, 'clock': 3055679219, 'query_ticks': 152, 'next_sequence': 40387, 'buffered': 0, 'fifo': 255, 'limit_count': 0, '#name': 'adxl345_status', '#sent_time': 245.276442853, '#receive_time': 245.276831279}
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (0.0, 10.0)     | (27.0, 5.0)
  1   | (35.5, 10.0)    | (62.5, 5.0)
  2   | (71.0, 10.0)    | (98.0, 5.0)
  3   | (106.5, 10.0)   | (133.5, 5.0)
  4   | (142.0, 10.0)   | (169.0, 5.0)
  5   | (177.5, 10.0)   | (204.5, 5.0)
  6   | (213.0, 10.0)   | (240.0, 5.0)
  7   | (213.0, 58.8)   | (240.0, 53.8)
  8   | (177.5, 58.8)   | (204.5, 53.8)
  9   | (142.0, 58.8)   | (169.0, 53.8)
  10  | (106.5, 58.8)   | (133.5, 53.8)
  11  | (71.0, 58.8)    | (98.0, 53.8)
  12  | (35.5, 58.8)    | (62.5, 53.8)
  13  | (0.0, 58.8)     | (27.0, 53.8)
  14  | (0.0, 107.5)    | (27.0, 102.5)
  15  | (35.5, 107.5)   | (62.5, 102.5)
  16  | (71.0, 107.5)   | (98.0, 102.5)
  17  | (106.5, 107.5)  | (133.5, 102.5)
  18  | (142.0, 107.5)  | (169.0, 102.5)
  19  | (177.5, 107.5)  | (204.5, 102.5)
  20  | (213.0, 107.5)  | (240.0, 102.5)
  21  | (213.0, 156.2)  | (240.0, 151.2)
  22  | (177.5, 156.2)  | (204.5, 151.2)
  23  | (142.0, 156.2)  | (169.0, 151.2)
  24  | (106.5, 156.2)  | (133.5, 151.2)
  25  | (71.0, 156.2)   | (98.0, 151.2)
  26  | (35.5, 156.2)   | (62.5, 151.2)
  27  | (0.0, 156.2)    | (27.0, 151.2)
  28  | (0.0, 205.0)    | (27.0, 200.0)
  29  | (35.5, 205.0)   | (62.5, 200.0)
  30  | (71.0, 205.0)   | (98.0, 200.0)
  31  | (106.5, 205.0)  | (133.5, 200.0)
  32  | (142.0, 205.0)  | (169.0, 200.0)
  33  | (177.5, 205.0)  | (204.5, 200.0)
  34  | (213.0, 205.0)  | (240.0, 200.0)
Starting heater checks for extruder
Starting heater checks for heater_bed
webhooks: registering remote method 'shutdown_machine' for connection id: 547755010704
webhooks: registering remote method 'reboot_machine' for connection id: 547755010704
webhooks: registering remote method 'pause_job_queue' for connection id: 547755010704
webhooks: registering remote method 'start_job_queue' for connection id: 547755010704
webhooks: registering remote method 'publish_mqtt_topic' for connection id: 547755010704
webhooks: registering remote method 'set_device_power' for connection id: 547755010704
webhooks: registering remote method 'notify' for connection id: 547755010704
webhooks: registering remote method 'timelapse_newframe' for connection id: 547755010704
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 547755010704
webhooks: registering remote method 'timelapse_render' for connection id: 547755010704
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:mzv shaper_freq_y:26.400 damping_ratio_y:0.100000
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:mzv shaper_freq_y:26.400 damping_ratio_y:0.100000
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:mzv shaper_freq_y:26.400 damping_ratio_y:0.100000
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:mzv shaper_freq_y:26.400 damping_ratio_y:0.100000
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:mzv shaper_freq_y:26.400 damping_ratio_y:0.100000
ADXL345 starting 'adxl345' measurements
Stats 290.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2898 bytes_read=11219 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993469 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1277 bytes_read=22990 bytes_retransmit=9 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999900 adj=12001016 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=1.09 cputime=44.308 memavail=7396124 print_time=467.481 buffer_time=0.329 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
accelerometer values (x, y, z): 1110.308913, 76.609550, -9548.656652
Stats 291.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2904 bytes_read=11339 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993510 adxl: mcu_awake=0.089 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1353 bytes_read=41850 bytes_retransmit=9 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999894 adj=12000860 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=1.09 cputime=44.503 memavail=7397100 print_time=469.814 buffer_time=1.661 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 292.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2910 bytes_read=11460 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993459 adxl: mcu_awake=0.089 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1422 bytes_read=60793 bytes_retransmit=9 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999890 adj=12000579 heater_bed: target=0 temp=28.5 pwm=0.000  sysload=1.09 cputime=44.701 memavail=7401920 print_time=469.814 buffer_time=0.659 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
ADXL345 finished 'adxl345' measurements
Axes noise for xy-axis accelerometer: 145.670820 (x), 132.196243 (y), 128.173462 (z)
Stats 293.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2916 bytes_read=11581 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993407 adxl: mcu_awake=0.089 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1493 bytes_read=74306 bytes_retransmit=9 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999886 adj=12000587 heater_bed: target=0 temp=28.5 pwm=0.000  sysload=1.09 cputime=44.846 memavail=7397624 print_time=469.814 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 294.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2922 bytes_read=11687 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993380 adxl: mcu_awake=0.089 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1499 bytes_read=74322 bytes_retransmit=9 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999882 adj=12000585 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=1.09 cputime=44.876 memavail=7398132 print_time=469.814 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 295.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2928 bytes_read=11823 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993459 adxl: mcu_awake=0.089 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=1505 bytes_read=74338 bytes_retransmit=9 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999881 adj=12000570 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=1.00 cputime=44.908 memavail=7399928 print_time=469.814 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 296.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2934 bytes_read=11929 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993416 adxl: mcu_awake=0.215 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1511 bytes_read=74370 bytes_retransmit=9 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999878 adj=12000463 heater_bed: target=0 temp=28.5 pwm=0.000  sysload=1.00 cputime=44.933 memavail=7400052 print_time=469.814 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 297.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2940 bytes_read=12049 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993380 adxl: mcu_awake=0.215 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1517 bytes_read=74386 bytes_retransmit=9 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999875 adj=12000499 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=1.00 cputime=44.967 memavail=7396740 print_time=469.814 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 298.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4479 bytes_read=13333 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993319 adxl: mcu_awake=0.215 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1523 bytes_read=74402 bytes_retransmit=9 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999877 adj=12000518 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=1.00 cputime=45.140 memavail=7394484 print_time=475.353 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 299.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4893 bytes_read=13835 bytes_retransmit=9 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993296 adxl: mcu_awake=0.215 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1529 bytes_read=74418 bytes_retransmit=9 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000603 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=1.00 cputime=45.189 memavail=7393364 print_time=476.353 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 300.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=6003 bytes_read=15004 bytes_retransmit=9 bytes_invalid=0 send_seq=435 receive_seq=435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993261 adxl: mcu_awake=0.215 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1535 bytes_read=74434 bytes_retransmit=9 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000583 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=0.92 cputime=45.337 memavail=7392692 print_time=477.373 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 301.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=7075 bytes_read=15766 bytes_retransmit=9 bytes_invalid=0 send_seq=485 receive_seq=485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993236 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1541 bytes_read=74461 bytes_retransmit=9 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000585 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=0.92 cputime=45.416 memavail=7402076 print_time=479.010 buffer_time=0.846 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 302.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=7201 bytes_read=16071 bytes_retransmit=9 bytes_invalid=0 send_seq=494 receive_seq=494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=119993221 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1547 bytes_read=74477 bytes_retransmit=9 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000571 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.92 cputime=45.458 memavail=7401408 print_time=479.010 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 303.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=7500 bytes_read=16537 bytes_retransmit=9 bytes_invalid=0 send_seq=515 receive_seq=515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=119993202 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1553 bytes_read=74493 bytes_retransmit=9 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000664 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=0.92 cputime=45.513 memavail=7401184 print_time=480.953 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 304.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=7971 bytes_read=16954 bytes_retransmit=9 bytes_invalid=0 send_seq=535 receive_seq=535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993188 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1559 bytes_read=74509 bytes_retransmit=9 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000606 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=0.92 cputime=45.563 memavail=7403528 print_time=481.353 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 305.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=8584 bytes_read=17489 bytes_retransmit=9 bytes_invalid=0 send_seq=565 receive_seq=565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993176 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1565 bytes_read=74525 bytes_retransmit=9 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000595 heater_bed: target=0 temp=28.5 pwm=0.000  sysload=0.85 cputime=45.626 memavail=7402068 print_time=482.353 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 306.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=9197 bytes_read=18024 bytes_retransmit=9 bytes_invalid=0 send_seq=595 receive_seq=595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993173 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1571 bytes_read=74552 bytes_retransmit=9 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000581 heater_bed: target=0 temp=28.5 pwm=0.000  sysload=0.85 cputime=45.686 memavail=7401620 print_time=483.353 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 307.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=10093 bytes_read=18601 bytes_retransmit=9 bytes_invalid=0 send_seq=626 receive_seq=626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993216 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1577 bytes_read=74568 bytes_retransmit=9 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000564 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=0.85 cputime=45.761 memavail=7400924 print_time=484.366 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 308.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=10620 bytes_read=19175 bytes_retransmit=9 bytes_invalid=0 send_seq=657 receive_seq=657 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993222 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1583 bytes_read=74584 bytes_retransmit=9 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000591 heater_bed: target=0 temp=28.5 pwm=0.000  sysload=0.85 cputime=45.839 memavail=7400476 print_time=484.960 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 309.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=11932 bytes_read=19708 bytes_retransmit=9 bytes_invalid=0 send_seq=691 receive_seq=691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993209 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1589 bytes_read=74600 bytes_retransmit=9 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000555 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.85 cputime=45.908 memavail=7400476 print_time=487.853 buffer_time=1.682 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 310.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=12050 bytes_read=20028 bytes_retransmit=9 bytes_invalid=0 send_seq=700 receive_seq=700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993195 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1595 bytes_read=74616 bytes_retransmit=9 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000559 heater_bed: target=0 temp=28.5 pwm=0.000  sysload=0.78 cputime=45.951 memavail=7402752 print_time=487.853 buffer_time=0.682 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Stats 311.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=12168 bytes_read=20318 bytes_retransmit=9 bytes_invalid=0 send_seq=709 receive_seq=709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993186 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1611 bytes_read=74658 bytes_retransmit=9 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999877 adj=12000571 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=0.78 cputime=45.996 memavail=7393544 print_time=488.647 buffer_time=0.475 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 312.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=12286 bytes_read=20623 bytes_retransmit=9 bytes_invalid=0 send_seq=718 receive_seq=718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993241 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1617 bytes_read=74674 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999875 adj=12000635 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=0.78 cputime=46.043 memavail=7391088 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 313.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=12404 bytes_read=20943 bytes_retransmit=9 bytes_invalid=0 send_seq=727 receive_seq=727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993223 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1623 bytes_read=74690 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000530 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=0.78 cputime=46.085 memavail=7391580 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 314.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=12522 bytes_read=21233 bytes_retransmit=9 bytes_invalid=0 send_seq=736 receive_seq=736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993206 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1629 bytes_read=74706 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000530 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=0.78 cputime=46.123 memavail=7402896 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 315.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=12640 bytes_read=21523 bytes_retransmit=9 bytes_invalid=0 send_seq=745 receive_seq=745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993194 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1635 bytes_read=74722 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000536 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=0.72 cputime=46.163 memavail=7398024 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 316.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000011 bytes_write=12758 bytes_read=21843 bytes_retransmit=9 bytes_invalid=0 send_seq=754 receive_seq=754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993245 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1641 bytes_read=74749 bytes_retransmit=9 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000543 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.72 cputime=46.213 memavail=7399040 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 317.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12876 bytes_read=22148 bytes_retransmit=9 bytes_invalid=0 send_seq=763 receive_seq=763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993225 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1647 bytes_read=74765 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000466 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=0.72 cputime=46.253 memavail=7399460 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 318.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12994 bytes_read=22453 bytes_retransmit=9 bytes_invalid=0 send_seq=772 receive_seq=772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993206 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1653 bytes_read=74781 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000496 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.72 cputime=46.297 memavail=7399612 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:mzv shaper_freq_y:26.400 damping_ratio_y:0.100000
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
API Dump Helper start callback error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/extras/motion_report.py", line 46, in _start
    self.startstop_cb(True)
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 430, in _api_startstop
    self._start_measurements()
  File "/home/pi/klipper/klippy/extras/adxl345.py", line 376, in _start_measurements
    raise self.printer.command_error(
gcode.CommandError: Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Invalid adxl345 id (got 0 vs e5).
This is generally indicative of connection problems
(e.g. faulty wiring) or a faulty adxl345 chip.
Stats 319.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13112 bytes_read=22758 bytes_retransmit=9 bytes_invalid=0 send_seq=781 receive_seq=781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993190 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1679 bytes_read=74827 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000520 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.72 cputime=46.367 memavail=7394184 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 320.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13230 bytes_read=23048 bytes_retransmit=9 bytes_invalid=0 send_seq=790 receive_seq=790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993175 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1685 bytes_read=74843 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000528 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.66 cputime=46.403 memavail=7392776 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 321.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13348 bytes_read=23353 bytes_retransmit=9 bytes_invalid=0 send_seq=799 receive_seq=799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993270 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=1691 bytes_read=74870 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000549 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.66 cputime=46.442 memavail=7391408 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 322.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13466 bytes_read=23673 bytes_retransmit=9 bytes_invalid=0 send_seq=808 receive_seq=808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993248 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=1697 bytes_read=74886 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000452 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.66 cputime=46.479 memavail=7398660 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 323.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13584 bytes_read=23963 bytes_retransmit=9 bytes_invalid=0 send_seq=817 receive_seq=817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993234 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=1703 bytes_read=74902 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000483 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.66 cputime=46.515 memavail=7403636 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 324.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13702 bytes_read=24260 bytes_retransmit=9 bytes_invalid=0 send_seq=826 receive_seq=826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993223 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=1709 bytes_read=74918 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000500 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.66 cputime=46.553 memavail=7404144 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 325.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13820 bytes_read=24557 bytes_retransmit=9 bytes_invalid=0 send_seq=835 receive_seq=835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993212 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=1715 bytes_read=74934 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000522 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.61 cputime=46.595 memavail=7402928 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 326.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13938 bytes_read=24844 bytes_retransmit=9 bytes_invalid=0 send_seq=844 receive_seq=844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993199 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1721 bytes_read=74961 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000534 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.61 cputime=46.632 memavail=7401752 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:mzv shaper_freq_y:26.400 damping_ratio_y:0.100000
ADXL345 starting 'adxl345' measurements
Stats 327.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14056 bytes_read=25164 bytes_retransmit=9 bytes_invalid=0 send_seq=853 receive_seq=853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993185 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1852 bytes_read=75097 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2 freq=11999862 adj=12000545 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.61 cputime=46.693 memavail=7398064 print_time=488.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 328.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14174 bytes_read=25469 bytes_retransmit=9 bytes_invalid=0 send_seq=862 receive_seq=862 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993168 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1921 bytes_read=92140 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999861 adj=12000551 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.61 cputime=46.855 memavail=7397976 print_time=505.529 buffer_time=0.346 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
accelerometer values (x, y, z): 814.226536, -766.095498, -9104.533087
Stats 329.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14292 bytes_read=25759 bytes_retransmit=9 bytes_invalid=0 send_seq=871 receive_seq=871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993154 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1997 bytes_read=111106 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000558 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.61 cputime=47.029 memavail=7398296 print_time=507.845 buffer_time=1.661 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 330.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14410 bytes_read=26064 bytes_retransmit=9 bytes_invalid=0 send_seq=880 receive_seq=880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993155 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2073 bytes_read=127012 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000652 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.56 cputime=47.221 memavail=7403404 print_time=507.845 buffer_time=0.661 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Axes noise for xy-axis accelerometer: 143.836200 (x), 140.316902 (y), 124.145259 (z)
Stats 331.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14528 bytes_read=26369 bytes_retransmit=9 bytes_invalid=0 send_seq=889 receive_seq=889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993140 adxl: mcu_awake=0.233 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2149 bytes_read=131954 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000632 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.56 cputime=47.411 memavail=7398952 print_time=507.845 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 332.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14646 bytes_read=26674 bytes_retransmit=9 bytes_invalid=0 send_seq=898 receive_seq=898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993134 adxl: mcu_awake=0.233 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2225 bytes_read=136940 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000638 heater_bed: target=0 temp=28.4 pwm=0.000  sysload=0.56 cputime=47.527 memavail=7398148 print_time=507.845 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 10000.000000
square_corner_velocity: 5.000000
Disabled [input_shaper] for resonance testing
Testing frequency 5 Hz
Testing frequency 6 Hz
Testing frequency 7 Hz
Testing frequency 8 Hz
Testing frequency 9 Hz
Stats 333.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=21473 bytes_read=27524 bytes_retransmit=9 bytes_invalid=0 send_seq=1016 receive_seq=1016 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993122 adxl: mcu_awake=0.233 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2301 bytes_read=141866 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000612 heater_bed: target=0 temp=28.6 pwm=0.000  sysload=0.56 cputime=47.665 memavail=7394284 print_time=514.938 buffer_time=4.753 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 334.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=21607 bytes_read=27829 bytes_retransmit=9 bytes_invalid=0 send_seq=1025 receive_seq=1025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993113 adxl: mcu_awake=0.233 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2377 bytes_read=146852 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999877 adj=12000543 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.56 cputime=47.797 memavail=7389540 print_time=514.938 buffer_time=3.752 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 335.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=21725 bytes_read=28119 bytes_retransmit=9 bytes_invalid=0 send_seq=1034 receive_seq=1034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993179 adxl: mcu_awake=0.233 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=2453 bytes_read=151778 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000626 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.51 cputime=47.897 memavail=7390120 print_time=514.938 buffer_time=2.751 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 336.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=22764 bytes_read=28499 bytes_retransmit=9 bytes_invalid=0 send_seq=1058 receive_seq=1058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993164 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=2529 bytes_read=156779 bytes_retransmit=9 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000584 heater_bed: target=0 temp=28.3 pwm=0.000  sysload=0.51 cputime=48.002 memavail=7402492 print_time=515.425 buffer_time=2.238 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 10 Hz
Stats 337.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=25028 bytes_read=28989 bytes_retransmit=9 bytes_invalid=0 send_seq=1101 receive_seq=1101 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993153 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=2605 bytes_read=161705 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000575 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.51 cputime=48.098 memavail=7401260 print_time=516.475 buffer_time=2.287 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Testing frequency 11 Hz
Stats 338.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=27221 bytes_read=29444 bytes_retransmit=9 bytes_invalid=0 send_seq=1143 receive_seq=1143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993146 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=2681 bytes_read=166691 bytes_retransmit=9 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999878 adj=12000597 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.51 cputime=48.213 memavail=7402856 print_time=517.451 buffer_time=2.263 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 12 Hz
Stats 339.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=29738 bytes_read=29939 bytes_retransmit=9 bytes_invalid=0 send_seq=1190 receive_seq=1190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993187 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=2757 bytes_read=171617 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000614 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.51 cputime=48.331 memavail=7402216 print_time=518.510 buffer_time=2.321 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Testing frequency 13 Hz
Stats 340.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=32171 bytes_read=30429 bytes_retransmit=9 bytes_invalid=0 send_seq=1236 receive_seq=1236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=119993183 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=2833 bytes_read=176603 bytes_retransmit=9 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999875 adj=12000569 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.47 cputime=48.442 memavail=7401320 print_time=519.505 buffer_time=2.315 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Testing frequency 14 Hz
Stats 341.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=34858 bytes_read=30924 bytes_retransmit=9 bytes_invalid=0 send_seq=1286 receive_seq=1286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=119993175 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=2909 bytes_read=181544 bytes_retransmit=9 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000560 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.47 cputime=48.556 memavail=7402436 print_time=520.535 buffer_time=2.345 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Testing frequency 15 Hz
Stats 342.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=37504 bytes_read=31445 bytes_retransmit=9 bytes_invalid=0 send_seq=1335 receive_seq=1335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993169 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=2978 bytes_read=186507 bytes_retransmit=9 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000553 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.47 cputime=48.665 memavail=7401988 print_time=521.512 buffer_time=2.322 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Testing frequency 16 Hz
Stats 343.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=40256 bytes_read=31960 bytes_retransmit=9 bytes_invalid=0 send_seq=1386 receive_seq=1386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119993205 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=3060 bytes_read=191440 bytes_retransmit=9 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000546 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.47 cputime=48.805 memavail=7403568 print_time=522.538 buffer_time=2.347 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 17 Hz
Stats 344.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=43112 bytes_read=32470 bytes_retransmit=9 bytes_invalid=0 send_seq=1439 receive_seq=1439 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=119993194 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=3136 bytes_read=196415 bytes_retransmit=9 bytes_invalid=0 send_seq=432 receive_seq=432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000486 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.47 cputime=48.923 memavail=7401980 print_time=523.546 buffer_time=2.355 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Testing frequency 18 Hz
Stats 345.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=45926 bytes_read=32985 bytes_retransmit=9 bytes_invalid=0 send_seq=1490 receive_seq=1490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119993199 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=3212 bytes_read=201330 bytes_retransmit=9 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000496 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.43 cputime=49.036 memavail=7401996 print_time=524.554 buffer_time=2.362 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Testing frequency 19 Hz
Stats 346.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=49142 bytes_read=33535 bytes_retransmit=9 bytes_invalid=0 send_seq=1548 receive_seq=1548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119993191 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=3288 bytes_read=206320 bytes_retransmit=9 bytes_invalid=0 send_seq=454 receive_seq=454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000491 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.43 cputime=49.152 memavail=7403472 print_time=525.561 buffer_time=2.368 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Testing frequency 20 Hz
Stats 347.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=52008 bytes_read=34056 bytes_retransmit=9 bytes_invalid=0 send_seq=1600 receive_seq=1600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119993183 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=3364 bytes_read=211235 bytes_retransmit=9 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000513 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.43 cputime=49.288 memavail=7402576 print_time=526.579 buffer_time=2.386 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 21 Hz
Stats 348.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=55189 bytes_read=34601 bytes_retransmit=9 bytes_invalid=0 send_seq=1657 receive_seq=1657 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=119993241 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=3440 bytes_read=216207 bytes_retransmit=9 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000518 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.43 cputime=49.409 memavail=7404208 print_time=527.583 buffer_time=2.390 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 22 Hz
Stats 349.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=58434 bytes_read=35151 bytes_retransmit=9 bytes_invalid=0 send_seq=1715 receive_seq=1715 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993228 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=3516 bytes_read=221122 bytes_retransmit=9 bytes_invalid=0 send_seq=487 receive_seq=487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000454 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.43 cputime=49.533 memavail=7403060 print_time=528.577 buffer_time=2.382 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Testing frequency 23 Hz
Stats 350.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=61568 bytes_read=35676 bytes_retransmit=9 bytes_invalid=0 send_seq=1771 receive_seq=1771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993217 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=3592 bytes_read=226097 bytes_retransmit=9 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000474 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.64 cputime=49.657 memavail=7402388 print_time=529.581 buffer_time=2.386 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 24 Hz
Stats 351.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=65157 bytes_read=36251 bytes_retransmit=9 bytes_invalid=0 send_seq=1834 receive_seq=1834 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119993208 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=3668 bytes_read=231087 bytes_retransmit=9 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000489 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.64 cputime=49.789 memavail=7404408 print_time=530.595 buffer_time=2.398 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 25 Hz
Stats 352.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=68569 bytes_read=36832 bytes_retransmit=9 bytes_invalid=0 send_seq=1895 receive_seq=1895 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993200 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=3744 bytes_read=236002 bytes_retransmit=9 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000548 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.64 cputime=49.904 memavail=7402588 print_time=531.589 buffer_time=2.391 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 26 Hz
Stats 353.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=71922 bytes_read=37377 bytes_retransmit=9 bytes_invalid=0 send_seq=1955 receive_seq=1955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993190 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=3820 bytes_read=240917 bytes_retransmit=9 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000546 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.64 cputime=50.030 memavail=7404188 print_time=532.593 buffer_time=2.392 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 27 Hz
Stats 354.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=75525 bytes_read=37952 bytes_retransmit=9 bytes_invalid=0 send_seq=2018 receive_seq=2018 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119993182 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=3896 bytes_read=245892 bytes_retransmit=9 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000549 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.64 cputime=50.157 memavail=7401572 print_time=533.605 buffer_time=2.399 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Testing frequency 28 Hz
Stats 355.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=79327 bytes_read=38547 bytes_retransmit=9 bytes_invalid=0 send_seq=2085 receive_seq=2085 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119993174 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=3972 bytes_read=250867 bytes_retransmit=9 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000549 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.59 cputime=50.281 memavail=7403176 print_time=534.607 buffer_time=2.401 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 29 Hz
Stats 356.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=82689 bytes_read=39092 bytes_retransmit=9 bytes_invalid=0 send_seq=2145 receive_seq=2145 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119993169 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=4041 bytes_read=255775 bytes_retransmit=9 bytes_invalid=0 send_seq=563 receive_seq=563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000555 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.59 cputime=50.397 memavail=7401832 print_time=535.610 buffer_time=2.403 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 30 Hz
Stats 357.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=86373 bytes_read=39693 bytes_retransmit=9 bytes_invalid=0 send_seq=2210 receive_seq=2210 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993163 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=4117 bytes_read=260750 bytes_retransmit=9 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000552 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.59 cputime=50.525 memavail=7403712 print_time=536.604 buffer_time=2.396 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Testing frequency 31 Hz
Stats 358.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=90386 bytes_read=40303 bytes_retransmit=9 bytes_invalid=0 send_seq=2280 receive_seq=2280 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119993158 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=4193 bytes_read=265665 bytes_retransmit=9 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000551 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.59 cputime=50.638 memavail=7404912 print_time=537.606 buffer_time=2.398 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 32 Hz
Stats 359.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=94379 bytes_read=40887 bytes_retransmit=9 bytes_invalid=0 send_seq=2348 receive_seq=2348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=160 freq=119993151 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=4269 bytes_read=270640 bytes_retransmit=9 bytes_invalid=0 send_seq=596 receive_seq=596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000551 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.59 cputime=50.756 memavail=7402868 print_time=538.609 buffer_time=2.400 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 33 Hz
Stats 360.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=98446 bytes_read=41494 bytes_retransmit=9 bytes_invalid=0 send_seq=2417 receive_seq=2417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=250 freq=119993190 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=4345 bytes_read=275555 bytes_retransmit=9 bytes_invalid=0 send_seq=607 receive_seq=607 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000553 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.54 cputime=50.890 memavail=7401524 print_time=539.603 buffer_time=2.393 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 34 Hz
Stats 361.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=102567 bytes_read=42101 bytes_retransmit=9 bytes_invalid=0 send_seq=2488 receive_seq=2488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993189 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=4421 bytes_read=280545 bytes_retransmit=9 bytes_invalid=0 send_seq=618 receive_seq=618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000506 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.54 cputime=51.044 memavail=7403612 print_time=540.620 buffer_time=2.409 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 35 Hz
Stats 362.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=106299 bytes_read=42697 bytes_retransmit=9 bytes_invalid=0 send_seq=2555 receive_seq=2555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993183 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=4497 bytes_read=285460 bytes_retransmit=9 bytes_invalid=0 send_seq=629 receive_seq=629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000511 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.54 cputime=51.161 memavail=7402540 print_time=541.608 buffer_time=2.396 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Testing frequency 36 Hz
Stats 363.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=110256 bytes_read=43312 bytes_retransmit=9 bytes_invalid=0 send_seq=2626 receive_seq=2626 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993183 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=4573 bytes_read=290435 bytes_retransmit=9 bytes_invalid=0 send_seq=640 receive_seq=640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000518 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.54 cputime=51.285 memavail=7404348 print_time=542.623 buffer_time=2.411 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 37 Hz
Stats 364.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=114021 bytes_read=43897 bytes_retransmit=9 bytes_invalid=0 send_seq=2691 receive_seq=2691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=103 freq=119993279 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=4649 bytes_read=295350 bytes_retransmit=9 bytes_invalid=0 send_seq=651 receive_seq=651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000520 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.54 cputime=51.425 memavail=7402952 print_time=543.611 buffer_time=2.399 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 38 Hz
Stats 365.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=117856 bytes_read=44472 bytes_retransmit=9 bytes_invalid=0 send_seq=2757 receive_seq=2757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=384 freq=119993279 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=4725 bytes_read=300271 bytes_retransmit=9 bytes_invalid=0 send_seq=662 receive_seq=662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999861 adj=12000424 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.50 cputime=51.568 memavail=7402080 print_time=544.626 buffer_time=2.414 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 39 Hz
Stats 366.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=121831 bytes_read=45072 bytes_retransmit=9 bytes_invalid=0 send_seq=2825 receive_seq=2825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=822 freq=119993273 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=4801 bytes_read=305272 bytes_retransmit=9 bytes_invalid=0 send_seq=673 receive_seq=673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999861 adj=12000439 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.50 cputime=51.699 memavail=7403932 print_time=545.615 buffer_time=2.402 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 40 Hz
Stats 367.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=126040 bytes_read=45698 bytes_retransmit=9 bytes_invalid=0 send_seq=2895 receive_seq=2895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=1611 freq=119993268 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=4877 bytes_read=310198 bytes_retransmit=9 bytes_invalid=0 send_seq=684 receive_seq=684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999861 adj=12000454 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.50 cputime=51.851 memavail=7401892 print_time=546.628 buffer_time=2.416 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 41 Hz
Stats 368.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=130487 bytes_read=46328 bytes_retransmit=9 bytes_invalid=0 send_seq=2972 receive_seq=2972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=2196 freq=119993258 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=4946 bytes_read=315161 bytes_retransmit=9 bytes_invalid=0 send_seq=694 receive_seq=694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999860 adj=12000472 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.50 cputime=52.017 memavail=7401220 print_time=547.630 buffer_time=2.416 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 42 Hz
Stats 369.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=135812 bytes_read=47048 bytes_retransmit=9 bytes_invalid=0 send_seq=3064 receive_seq=3064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=1100 freq=119993247 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=5022 bytes_read=320087 bytes_retransmit=9 bytes_invalid=0 send_seq=705 receive_seq=705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999860 adj=12000489 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.50 cputime=52.198 memavail=7399756 print_time=548.631 buffer_time=2.416 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 43 Hz
Stats 370.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=141031 bytes_read=47768 bytes_retransmit=9 bytes_invalid=0 send_seq=3157 receive_seq=3156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=238 freq=119993242 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=5098 bytes_read=325073 bytes_retransmit=9 bytes_invalid=0 send_seq=716 receive_seq=716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999860 adj=12000506 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.62 cputime=52.348 memavail=7402024 print_time=549.632 buffer_time=2.417 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 44 Hz
Stats 371.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=145296 bytes_read=48388 bytes_retransmit=9 bytes_invalid=0 send_seq=3231 receive_seq=3231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=126 freq=119993237 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=5174 bytes_read=330014 bytes_retransmit=9 bytes_invalid=0 send_seq=727 receive_seq=727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999860 adj=12000514 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.62 cputime=52.481 memavail=7400792 print_time=550.633 buffer_time=2.417 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 45 Hz
Stats 372.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=149300 bytes_read=49009 bytes_retransmit=9 bytes_invalid=0 send_seq=3300 receive_seq=3300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=278 freq=119993229 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=5250 bytes_read=335000 bytes_retransmit=9 bytes_invalid=0 send_seq=738 receive_seq=738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999861 adj=12000524 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.62 cputime=52.621 memavail=7403192 print_time=551.623 buffer_time=2.407 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 46 Hz
Stats 373.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=153394 bytes_read=49619 bytes_retransmit=9 bytes_invalid=0 send_seq=3370 receive_seq=3370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=523 freq=119993233 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=5326 bytes_read=339986 bytes_retransmit=9 bytes_invalid=0 send_seq=749 receive_seq=749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000543 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.62 cputime=52.756 memavail=7401732 print_time=552.635 buffer_time=2.417 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 47 Hz
Stats 374.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=157607 bytes_read=50224 bytes_retransmit=9 bytes_invalid=0 send_seq=3442 receive_seq=3442 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=672 freq=119993288 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=5402 bytes_read=344912 bytes_retransmit=9 bytes_invalid=0 send_seq=760 receive_seq=760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000549 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.62 cputime=52.923 memavail=7401940 print_time=553.625 buffer_time=2.407 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 48 Hz
Stats 375.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=161850 bytes_read=50849 bytes_retransmit=9 bytes_invalid=0 send_seq=3515 receive_seq=3515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1480 freq=119993272 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=5478 bytes_read=349838 bytes_retransmit=9 bytes_invalid=0 send_seq=771 receive_seq=771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000486 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.57 cputime=53.067 memavail=7403236 print_time=554.631 buffer_time=2.413 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 49 Hz
Stats 376.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=166075 bytes_read=51464 bytes_retransmit=9 bytes_invalid=0 send_seq=3586 receive_seq=3586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=2509 freq=119993265 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=5554 bytes_read=354839 bytes_retransmit=9 bytes_invalid=0 send_seq=782 receive_seq=782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999861 adj=12000514 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.57 cputime=53.219 memavail=7401800 print_time=555.637 buffer_time=2.419 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 50 Hz
Stats 377.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=170811 bytes_read=52120 bytes_retransmit=9 bytes_invalid=0 send_seq=3666 receive_seq=3665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3194 freq=119993256 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=5630 bytes_read=359765 bytes_retransmit=9 bytes_invalid=0 send_seq=793 receive_seq=793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000521 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.57 cputime=53.391 memavail=7401000 print_time=556.638 buffer_time=2.419 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 51 Hz
Stats 378.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=176055 bytes_read=52820 bytes_retransmit=9 bytes_invalid=0 send_seq=3753 receive_seq=3753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=3206 freq=119993274 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=5706 bytes_read=364751 bytes_retransmit=9 bytes_invalid=0 send_seq=804 receive_seq=804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000538 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.57 cputime=53.567 memavail=7402556 print_time=557.639 buffer_time=2.419 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 52 Hz
Stats 379.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=181744 bytes_read=53560 bytes_retransmit=9 bytes_invalid=0 send_seq=3849 receive_seq=3849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=2906 freq=119993266 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=5782 bytes_read=369677 bytes_retransmit=9 bytes_invalid=0 send_seq=815 receive_seq=815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000538 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.57 cputime=53.735 memavail=7402332 print_time=558.640 buffer_time=2.419 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 53 Hz
Stats 380.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=187217 bytes_read=54260 bytes_retransmit=9 bytes_invalid=0 send_seq=3940 receive_seq=3940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=2516 freq=119993252 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=5858 bytes_read=374663 bytes_retransmit=9 bytes_invalid=0 send_seq=826 receive_seq=826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000556 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.52 cputime=53.930 memavail=7404076 print_time=559.636 buffer_time=2.414 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 54 Hz
Stats 381.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=192374 bytes_read=54975 bytes_retransmit=9 bytes_invalid=0 send_seq=4031 receive_seq=4031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1732 freq=119993247 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=5927 bytes_read=379581 bytes_retransmit=9 bytes_invalid=0 send_seq=836 receive_seq=836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000561 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.52 cputime=54.113 memavail=7402892 print_time=560.641 buffer_time=2.419 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 55 Hz
Stats 382.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=198376 bytes_read=55781 bytes_retransmit=9 bytes_invalid=0 send_seq=4137 receive_seq=4137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=124 freq=119993243 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6003 bytes_read=384567 bytes_retransmit=9 bytes_invalid=0 send_seq=847 receive_seq=847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000558 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.52 cputime=54.280 memavail=7404516 print_time=561.633 buffer_time=2.410 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 56 Hz
Stats 383.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=202624 bytes_read=56411 bytes_retransmit=9 bytes_invalid=0 send_seq=4214 receive_seq=4214 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=318 freq=119993243 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6079 bytes_read=389493 bytes_retransmit=9 bytes_invalid=0 send_seq=858 receive_seq=858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000558 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.52 cputime=54.439 memavail=7403620 print_time=562.642 buffer_time=2.419 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 57 Hz
Stats 384.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=206892 bytes_read=57051 bytes_retransmit=9 bytes_invalid=0 send_seq=4290 receive_seq=4290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=490 freq=119993237 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6155 bytes_read=394479 bytes_retransmit=9 bytes_invalid=0 send_seq=869 receive_seq=869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000552 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.52 cputime=54.591 memavail=7401516 print_time=563.643 buffer_time=2.419 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 58 Hz
Stats 385.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=211292 bytes_read=57711 bytes_retransmit=9 bytes_invalid=0 send_seq=4370 receive_seq=4370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=658 freq=119993224 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6231 bytes_read=399405 bytes_retransmit=9 bytes_invalid=0 send_seq=880 receive_seq=880 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000552 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.48 cputime=54.742 memavail=7402932 print_time=564.643 buffer_time=2.419 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 59 Hz
Stats 386.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=215760 bytes_read=58361 bytes_retransmit=9 bytes_invalid=0 send_seq=4451 receive_seq=4451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=780 freq=119993223 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6307 bytes_read=404406 bytes_retransmit=9 bytes_invalid=0 send_seq=891 receive_seq=891 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000562 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.48 cputime=54.908 memavail=7401432 print_time=565.635 buffer_time=2.411 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 60 Hz
Stats 387.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=220011 bytes_read=59007 bytes_retransmit=9 bytes_invalid=0 send_seq=4525 receive_seq=4525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=1767 freq=119993223 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6383 bytes_read=409332 bytes_retransmit=9 bytes_invalid=0 send_seq=902 receive_seq=902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000561 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.48 cputime=55.080 memavail=7400736 print_time=566.644 buffer_time=2.419 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 61 Hz
Stats 388.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=224176 bytes_read=59622 bytes_retransmit=9 bytes_invalid=0 send_seq=4596 receive_seq=4596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=2913 freq=119993217 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6459 bytes_read=414318 bytes_retransmit=9 bytes_invalid=0 send_seq=913 receive_seq=913 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000561 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.48 cputime=55.317 memavail=7401320 print_time=567.645 buffer_time=2.419 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 62 Hz
Stats 389.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=229019 bytes_read=60277 bytes_retransmit=9 bytes_invalid=0 send_seq=4678 receive_seq=4678 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=30 upcoming_bytes=3530 freq=119993210 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6535 bytes_read=419244 bytes_retransmit=9 bytes_invalid=0 send_seq=924 receive_seq=924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000565 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.48 cputime=55.501 memavail=7399056 print_time=568.645 buffer_time=2.419 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 63 Hz
Stats 390.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=234420 bytes_read=60992 bytes_retransmit=9 bytes_invalid=0 send_seq=4769 receive_seq=4769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=3729 freq=119993201 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6611 bytes_read=424230 bytes_retransmit=9 bytes_invalid=0 send_seq=935 receive_seq=935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000565 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.44 cputime=55.672 memavail=7400164 print_time=569.646 buffer_time=2.419 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 64 Hz
Stats 391.8: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=239880 bytes_read=61712 bytes_retransmit=9 bytes_invalid=0 send_seq=4861 receive_seq=4861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=3920 freq=119993194 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6680 bytes_read=429148 bytes_retransmit=9 bytes_invalid=0 send_seq=945 receive_seq=945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000566 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.44 cputime=55.816 memavail=7401740 print_time=570.646 buffer_time=2.419 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 65 Hz
Stats 392.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=245451 bytes_read=62438 bytes_retransmit=9 bytes_invalid=0 send_seq=4954 receive_seq=4954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=4097 freq=119993251 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6756 bytes_read=434134 bytes_retransmit=9 bytes_invalid=0 send_seq=956 receive_seq=956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000565 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.44 cputime=55.977 memavail=7399896 print_time=571.647 buffer_time=2.419 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 66 Hz
Stats 393.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=251086 bytes_read=63173 bytes_retransmit=9 bytes_invalid=0 send_seq=5049 receive_seq=5049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=4271 freq=119993239 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6832 bytes_read=439060 bytes_retransmit=9 bytes_invalid=0 send_seq=967 receive_seq=967 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000538 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.44 cputime=56.200 memavail=7399832 print_time=572.643 buffer_time=2.415 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 67 Hz
Stats 394.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=256837 bytes_read=63918 bytes_retransmit=9 bytes_invalid=0 send_seq=5146 receive_seq=5146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=4463 freq=119993228 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6908 bytes_read=443986 bytes_retransmit=9 bytes_invalid=0 send_seq=978 receive_seq=978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000552 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.44 cputime=56.388 memavail=7401980 print_time=573.644 buffer_time=2.415 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 68 Hz
Stats 395.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=262685 bytes_read=64656 bytes_retransmit=9 bytes_invalid=0 send_seq=5245 receive_seq=5245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=4650 freq=119993219 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=6984 bytes_read=448972 bytes_retransmit=9 bytes_invalid=0 send_seq=989 receive_seq=989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000557 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.41 cputime=56.588 memavail=7401264 print_time=574.644 buffer_time=2.414 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 69 Hz
Stats 396.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=268592 bytes_read=65407 bytes_retransmit=9 bytes_invalid=0 send_seq=5345 receive_seq=5345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=4864 freq=119993221 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=7060 bytes_read=453913 bytes_retransmit=9 bytes_invalid=0 send_seq=1000 receive_seq=1000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000575 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.41 cputime=56.796 memavail=7401040 print_time=575.648 buffer_time=2.418 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 70 Hz
Stats 397.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=274603 bytes_read=66182 bytes_retransmit=9 bytes_invalid=0 send_seq=5446 receive_seq=5446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=4772 freq=119993215 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=7136 bytes_read=458899 bytes_retransmit=9 bytes_invalid=0 send_seq=1011 receive_seq=1011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000563 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.41 cputime=56.989 memavail=7403720 print_time=576.649 buffer_time=2.418 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 71 Hz
Stats 398.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=281009 bytes_read=66977 bytes_retransmit=9 bytes_invalid=0 send_seq=5556 receive_seq=5556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=3864 freq=119993214 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=7212 bytes_read=463825 bytes_retransmit=9 bytes_invalid=0 send_seq=1022 receive_seq=1022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000562 heater_bed: target=0 temp=28.2 pwm=0.000  sysload=0.41 cputime=57.169 memavail=7402196 print_time=577.642 buffer_time=2.410 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 72 Hz
Stats 399.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=287624 bytes_read=67807 bytes_retransmit=9 bytes_invalid=0 send_seq=5670 receive_seq=5670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=3198 freq=119993210 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=7288 bytes_read=468811 bytes_retransmit=9 bytes_invalid=0 send_seq=1033 receive_seq=1033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000556 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.41 cputime=57.365 memavail=7403792 print_time=578.649 buffer_time=2.417 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 73 Hz
Stats 400.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=292782 bytes_read=68512 bytes_retransmit=9 bytes_invalid=0 send_seq=5759 receive_seq=5759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=4393 freq=119993211 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=7364 bytes_read=473737 bytes_retransmit=9 bytes_invalid=0 send_seq=1044 receive_seq=1044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000554 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.37 cputime=57.556 memavail=7401972 print_time=579.650 buffer_time=2.416 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 74 Hz
Stats 401.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=297909 bytes_read=69187 bytes_retransmit=9 bytes_invalid=0 send_seq=5845 receive_seq=5845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=4484 freq=119993211 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=7440 bytes_read=478738 bytes_retransmit=9 bytes_invalid=0 send_seq=1055 receive_seq=1055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000554 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.37 cputime=57.734 memavail=7403344 print_time=580.650 buffer_time=2.416 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 75 Hz
Stats 402.8: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=304634 bytes_read=70048 bytes_retransmit=9 bytes_invalid=0 send_seq=5962 receive_seq=5962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2324 freq=119993208 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=7516 bytes_read=483664 bytes_retransmit=9 bytes_invalid=0 send_seq=1066 receive_seq=1066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000576 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.37 cputime=57.921 memavail=7402448 print_time=581.647 buffer_time=2.413 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 76 Hz
Stats 403.8: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=311075 bytes_read=70878 bytes_retransmit=9 bytes_invalid=0 send_seq=6076 receive_seq=6076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=497 freq=119993204 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=7585 bytes_read=488627 bytes_retransmit=9 bytes_invalid=0 send_seq=1076 receive_seq=1076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000569 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.37 cputime=58.087 memavail=7401776 print_time=582.651 buffer_time=2.415 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 77 Hz
Stats 404.8: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=315443 bytes_read=71518 bytes_retransmit=9 bytes_invalid=0 send_seq=6155 receive_seq=6155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=589 freq=119993275 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=7661 bytes_read=493553 bytes_retransmit=9 bytes_invalid=0 send_seq=1087 receive_seq=1087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000566 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.37 cputime=58.258 memavail=7403216 print_time=583.645 buffer_time=2.408 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 78 Hz
Stats 405.8: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=319868 bytes_read=72178 bytes_retransmit=9 bytes_invalid=0 send_seq=6235 receive_seq=6235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=728 freq=119993274 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=7737 bytes_read=498539 bytes_retransmit=9 bytes_invalid=0 send_seq=1098 receive_seq=1098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000479 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.34 cputime=58.427 memavail=7402784 print_time=584.651 buffer_time=2.414 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 79 Hz
Stats 406.8: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=324319 bytes_read=72838 bytes_retransmit=9 bytes_invalid=0 send_seq=6315 receive_seq=6315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=841 freq=119993322 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=7819 bytes_read=503496 bytes_retransmit=9 bytes_invalid=0 send_seq=1110 receive_seq=1110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000488 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.34 cputime=58.587 memavail=7402336 print_time=585.649 buffer_time=2.411 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 80 Hz
Stats 407.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=328863 bytes_read=73514 bytes_retransmit=9 bytes_invalid=0 send_seq=6398 receive_seq=6398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=972 freq=119993307 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=7895 bytes_read=508482 bytes_retransmit=9 bytes_invalid=0 send_seq=1121 receive_seq=1121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000439 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.34 cputime=58.746 memavail=7402336 print_time=586.652 buffer_time=2.413 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 81 Hz
Stats 408.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=333433 bytes_read=74189 bytes_retransmit=9 bytes_invalid=0 send_seq=6481 receive_seq=6481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1069 freq=119993349 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=7971 bytes_read=513468 bytes_retransmit=9 bytes_invalid=0 send_seq=1132 receive_seq=1132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000469 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.34 cputime=58.909 memavail=7403232 print_time=587.646 buffer_time=2.407 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 82 Hz
Stats 409.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=338112 bytes_read=74869 bytes_retransmit=9 bytes_invalid=0 send_seq=6565 receive_seq=6565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1213 freq=119993336 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=8047 bytes_read=518394 bytes_retransmit=9 bytes_invalid=0 send_seq=1143 receive_seq=1143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000427 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.34 cputime=59.073 memavail=7403232 print_time=588.653 buffer_time=2.412 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 83 Hz
Stats 410.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=342796 bytes_read=75539 bytes_retransmit=9 bytes_invalid=0 send_seq=6650 receive_seq=6650 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=35 upcoming_bytes=1326 freq=119993320 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=8123 bytes_read=523380 bytes_retransmit=9 bytes_invalid=0 send_seq=1154 receive_seq=1154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000456 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.31 cputime=59.268 memavail=7402336 print_time=589.653 buffer_time=2.411 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 84 Hz
Stats 411.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=347563 bytes_read=76229 bytes_retransmit=9 bytes_invalid=0 send_seq=6736 receive_seq=6736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1430 freq=119993311 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=8199 bytes_read=528321 bytes_retransmit=9 bytes_invalid=0 send_seq=1165 receive_seq=1165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000500 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.31 cputime=59.450 memavail=7404460 print_time=590.650 buffer_time=2.407 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 85 Hz
Stats 412.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=352361 bytes_read=76940 bytes_retransmit=9 bytes_invalid=0 send_seq=6823 receive_seq=6823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1544 freq=119993296 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=8275 bytes_read=533307 bytes_retransmit=9 bytes_invalid=0 send_seq=1176 receive_seq=1176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000526 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.31 cputime=59.626 memavail=7403540 print_time=591.647 buffer_time=2.404 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 86 Hz
Stats 413.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=357268 bytes_read=77625 bytes_retransmit=9 bytes_invalid=0 send_seq=6911 receive_seq=6911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1693 freq=119993281 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=8351 bytes_read=538233 bytes_retransmit=9 bytes_invalid=0 send_seq=1187 receive_seq=1187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000541 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.31 cputime=59.827 memavail=7402420 print_time=592.654 buffer_time=2.408 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 87 Hz
Stats 414.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=362206 bytes_read=78330 bytes_retransmit=9 bytes_invalid=0 send_seq=7000 receive_seq=7000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1811 freq=119993270 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=8420 bytes_read=543196 bytes_retransmit=9 bytes_invalid=0 send_seq=1197 receive_seq=1197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000558 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.31 cputime=60.014 memavail=7403496 print_time=593.654 buffer_time=2.407 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 88 Hz
Stats 415.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=367170 bytes_read=79035 bytes_retransmit=9 bytes_invalid=0 send_seq=7089 receive_seq=7089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1924 freq=119993261 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=8496 bytes_read=548122 bytes_retransmit=9 bytes_invalid=0 send_seq=1208 receive_seq=1208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000573 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.37 cputime=60.161 memavail=7402600 print_time=594.654 buffer_time=2.407 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 89 Hz
Stats 416.8: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=372227 bytes_read=79740 bytes_retransmit=9 bytes_invalid=0 send_seq=7181 receive_seq=7181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2047 freq=119993251 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=8567 bytes_read=553118 bytes_retransmit=9 bytes_invalid=0 send_seq=1218 receive_seq=1218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000636 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.37 cputime=60.369 memavail=7401704 print_time=595.651 buffer_time=2.405 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 90 Hz
Stats 417.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=377305 bytes_read=80471 bytes_retransmit=9 bytes_invalid=0 send_seq=7272 receive_seq=7272 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=35 upcoming_bytes=2175 freq=119993357 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=8643 bytes_read=558044 bytes_retransmit=9 bytes_invalid=0 send_seq=1229 receive_seq=1229 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000625 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.37 cputime=60.519 memavail=7404520 print_time=596.654 buffer_time=2.407 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 91 Hz
Stats 418.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=382497 bytes_read=81196 bytes_retransmit=9 bytes_invalid=0 send_seq=7365 receive_seq=7365 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=9 upcoming_bytes=2272 freq=119993335 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=8719 bytes_read=563030 bytes_retransmit=9 bytes_invalid=0 send_seq=1240 receive_seq=1240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000493 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.37 cputime=60.684 memavail=7404296 print_time=597.649 buffer_time=2.401 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 92 Hz
Stats 419.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=387720 bytes_read=81906 bytes_retransmit=9 bytes_invalid=0 send_seq=7459 receive_seq=7458 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=9 upcoming_bytes=2409 freq=119993321 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=8795 bytes_read=567956 bytes_retransmit=9 bytes_invalid=0 send_seq=1251 receive_seq=1251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000516 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.37 cputime=60.876 memavail=7402952 print_time=598.655 buffer_time=2.406 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 93 Hz
Stats 420.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=392969 bytes_read=82641 bytes_retransmit=9 bytes_invalid=0 send_seq=7553 receive_seq=7553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2532 freq=119993307 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=8871 bytes_read=572882 bytes_retransmit=9 bytes_invalid=0 send_seq=1262 receive_seq=1262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000526 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.34 cputime=61.065 memavail=7402728 print_time=599.652 buffer_time=2.403 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 94 Hz
Stats 421.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=398275 bytes_read=83376 bytes_retransmit=9 bytes_invalid=0 send_seq=7648 receive_seq=7648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2662 freq=119993314 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=8947 bytes_read=577883 bytes_retransmit=9 bytes_invalid=0 send_seq=1273 receive_seq=1273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000540 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.34 cputime=61.251 memavail=7402004 print_time=600.655 buffer_time=2.405 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 95 Hz
Stats 422.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=403664 bytes_read=84117 bytes_retransmit=9 bytes_invalid=0 send_seq=7744 receive_seq=7744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=2766 freq=119993302 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9023 bytes_read=582809 bytes_retransmit=9 bytes_invalid=0 send_seq=1284 receive_seq=1284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000526 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.34 cputime=61.438 memavail=7401108 print_time=601.653 buffer_time=2.402 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 96 Hz
Stats 423.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=409141 bytes_read=84867 bytes_retransmit=9 bytes_invalid=0 send_seq=7842 receive_seq=7842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2896 freq=119993286 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9099 bytes_read=587795 bytes_retransmit=9 bytes_invalid=0 send_seq=1295 receive_seq=1295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000535 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.34 cputime=61.640 memavail=7402944 print_time=602.656 buffer_time=2.404 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 97 Hz
Stats 424.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=414618 bytes_read=85617 bytes_retransmit=9 bytes_invalid=0 send_seq=7940 receive_seq=7940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=2999 freq=119993272 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9175 bytes_read=592721 bytes_retransmit=9 bytes_invalid=0 send_seq=1306 receive_seq=1306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000548 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.34 cputime=61.851 memavail=7403996 print_time=603.653 buffer_time=2.401 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 98 Hz
Stats 425.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=420147 bytes_read=86352 bytes_retransmit=9 bytes_invalid=0 send_seq=8038 receive_seq=8038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=3146 freq=119993261 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9251 bytes_read=597707 bytes_retransmit=9 bytes_invalid=0 send_seq=1317 receive_seq=1317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000558 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.31 cputime=62.045 memavail=7402432 print_time=604.656 buffer_time=2.404 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 99 Hz
Stats 426.8: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=425790 bytes_read=87112 bytes_retransmit=9 bytes_invalid=0 send_seq=8138 receive_seq=8138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=3267 freq=119993251 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9320 bytes_read=602625 bytes_retransmit=9 bytes_invalid=0 send_seq=1327 receive_seq=1327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000564 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.31 cputime=62.234 memavail=7401312 print_time=605.656 buffer_time=2.403 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 100 Hz
Stats 427.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=431469 bytes_read=87893 bytes_retransmit=9 bytes_invalid=0 send_seq=8240 receive_seq=8239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=3364 freq=119993238 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9396 bytes_read=607611 bytes_retransmit=9 bytes_invalid=0 send_seq=1338 receive_seq=1338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000628 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.31 cputime=62.395 memavail=7403696 print_time=606.654 buffer_time=2.400 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 101 Hz
Stats 428.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=437174 bytes_read=88653 bytes_retransmit=9 bytes_invalid=0 send_seq=8342 receive_seq=8342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=3477 freq=119993229 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9472 bytes_read=612537 bytes_retransmit=9 bytes_invalid=0 send_seq=1349 receive_seq=1349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000621 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.31 cputime=62.576 memavail=7402996 print_time=607.652 buffer_time=2.397 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 102 Hz
Stats 429.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=442931 bytes_read=89423 bytes_retransmit=9 bytes_invalid=0 send_seq=8444 receive_seq=8444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=3994 freq=119993216 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9548 bytes_read=617523 bytes_retransmit=9 bytes_invalid=0 send_seq=1360 receive_seq=1360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000614 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.31 cputime=62.744 memavail=7403960 print_time=608.657 buffer_time=2.401 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 103 Hz
Stats 430.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=448332 bytes_read=90148 bytes_retransmit=9 bytes_invalid=0 send_seq=8537 receive_seq=8537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=5511 freq=119993253 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9624 bytes_read=622449 bytes_retransmit=9 bytes_invalid=0 send_seq=1371 receive_seq=1371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000610 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.29 cputime=62.911 memavail=7401692 print_time=609.657 buffer_time=2.400 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 104 Hz
Stats 431.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=453617 bytes_read=90834 bytes_retransmit=9 bytes_invalid=0 send_seq=8626 receive_seq=8626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=7209 freq=119993240 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9700 bytes_read=627450 bytes_retransmit=9 bytes_invalid=0 send_seq=1382 receive_seq=1382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000561 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.29 cputime=63.076 memavail=7401020 print_time=610.655 buffer_time=2.397 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 105 Hz
Stats 432.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=460681 bytes_read=91711 bytes_retransmit=9 bytes_invalid=0 send_seq=8745 receive_seq=8745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=7323 freq=119993230 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9776 bytes_read=632376 bytes_retransmit=9 bytes_invalid=0 send_seq=1393 receive_seq=1393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000567 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.29 cputime=63.308 memavail=7403248 print_time=611.653 buffer_time=2.394 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 106 Hz
Stats 433.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=467799 bytes_read=92552 bytes_retransmit=9 bytes_invalid=0 send_seq=8865 receive_seq=8865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=7505 freq=119993223 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9852 bytes_read=637362 bytes_retransmit=9 bytes_invalid=0 send_seq=1404 receive_seq=1404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000568 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.29 cputime=63.518 memavail=7404620 print_time=612.657 buffer_time=2.398 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 107 Hz
Stats 434.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=474982 bytes_read=93397 bytes_retransmit=9 bytes_invalid=0 send_seq=8985 receive_seq=8985 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=31 upcoming_bytes=7636 freq=119993229 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9928 bytes_read=642288 bytes_retransmit=9 bytes_invalid=0 send_seq=1415 receive_seq=1415 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000568 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.29 cputime=63.732 memavail=7402872 print_time=613.658 buffer_time=2.397 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 108 Hz
Stats 435.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=482225 bytes_read=94277 bytes_retransmit=9 bytes_invalid=0 send_seq=9106 receive_seq=9106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=7774 freq=119993225 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=9997 bytes_read=647251 bytes_retransmit=9 bytes_invalid=0 send_seq=1425 receive_seq=1425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000553 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.26 cputime=63.934 memavail=7404248 print_time=614.658 buffer_time=2.396 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 109 Hz
Stats 436.8: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=489564 bytes_read=95137 bytes_retransmit=9 bytes_invalid=0 send_seq=9229 receive_seq=9229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=7891 freq=119993217 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=10073 bytes_read=652192 bytes_retransmit=9 bytes_invalid=0 send_seq=1436 receive_seq=1436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000554 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.26 cputime=64.137 memavail=7402904 print_time=615.653 buffer_time=2.392 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 110 Hz
Stats 437.8: gcodein=0  mcu: mcu_awake=0.037 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=496941 bytes_read=96013 bytes_retransmit=9 bytes_invalid=0 send_seq=9352 receive_seq=9352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=8067 freq=119993221 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=10149 bytes_read=657178 bytes_retransmit=9 bytes_invalid=0 send_seq=1447 receive_seq=1447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000560 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.26 cputime=64.335 memavail=7404720 print_time=616.658 buffer_time=2.395 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 111 Hz
Stats 438.8: gcodein=0  mcu: mcu_awake=0.037 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=504356 bytes_read=96903 bytes_retransmit=9 bytes_invalid=0 send_seq=9475 receive_seq=9475 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=28 upcoming_bytes=8106 freq=119993211 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=10225 bytes_read=662104 bytes_retransmit=9 bytes_invalid=0 send_seq=1458 receive_seq=1458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000548 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.26 cputime=64.551 memavail=7402424 print_time=617.656 buffer_time=2.393 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 112 Hz
Stats 439.8: gcodein=0  mcu: mcu_awake=0.037 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=511857 bytes_read=97773 bytes_retransmit=9 bytes_invalid=0 send_seq=9600 receive_seq=9600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=7143 freq=119993237 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=10301 bytes_read=667090 bytes_retransmit=9 bytes_invalid=0 send_seq=1469 receive_seq=1469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000554 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.26 cputime=64.778 memavail=7401536 print_time=618.658 buffer_time=2.395 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 113 Hz
Stats 440.8: gcodein=0  mcu: mcu_awake=0.037 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=520296 bytes_read=98764 bytes_retransmit=9 bytes_invalid=0 send_seq=9747 receive_seq=9747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=5427 freq=119993221 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=10377 bytes_read=672016 bytes_retransmit=9 bytes_invalid=0 send_seq=1480 receive_seq=1480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000530 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.24 cputime=64.982 memavail=7403856 print_time=619.658 buffer_time=2.395 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 114 Hz
Stats 441.8: gcodein=0  mcu: mcu_awake=0.037 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=527286 bytes_read=99664 bytes_retransmit=9 bytes_invalid=0 send_seq=9872 receive_seq=9872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=5040 freq=119993213 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=10453 bytes_read=677017 bytes_retransmit=9 bytes_invalid=0 send_seq=1491 receive_seq=1491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000553 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.24 cputime=65.187 memavail=7402736 print_time=620.659 buffer_time=2.394 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 115 Hz
Stats 442.8: gcodein=0  mcu: mcu_awake=0.038 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=533785 bytes_read=100495 bytes_retransmit=9 bytes_invalid=0 send_seq=9986 receive_seq=9986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=4776 freq=119993208 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=10529 bytes_read=681943 bytes_retransmit=9 bytes_invalid=0 send_seq=1502 receive_seq=1502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000569 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.24 cputime=65.367 memavail=7402008 print_time=621.659 buffer_time=2.394 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 116 Hz
Stats 443.8: gcodein=0  mcu: mcu_awake=0.038 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=539828 bytes_read=101245 bytes_retransmit=9 bytes_invalid=0 send_seq=10087 receive_seq=10087 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=50 upcoming_bytes=5190 freq=119993199 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=10605 bytes_read=686929 bytes_retransmit=9 bytes_invalid=0 send_seq=1513 receive_seq=1513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000564 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.24 cputime=65.551 memavail=7404728 print_time=622.657 buffer_time=2.391 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 117 Hz
Stats 444.8: gcodein=0  mcu: mcu_awake=0.038 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=546404 bytes_read=102090 bytes_retransmit=9 bytes_invalid=0 send_seq=10201 receive_seq=10201 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=16 upcoming_bytes=5375 freq=119993187 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=10681 bytes_read=691855 bytes_retransmit=9 bytes_invalid=0 send_seq=1524 receive_seq=1524 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000567 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.24 cputime=65.755 memavail=7401940 print_time=623.655 buffer_time=2.388 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 118 Hz
Stats 445.8: gcodein=0  mcu: mcu_awake=0.038 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=553104 bytes_read=102930 bytes_retransmit=9 bytes_invalid=0 send_seq=10320 receive_seq=10320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=5772 freq=119993182 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=10750 bytes_read=696818 bytes_retransmit=9 bytes_invalid=0 send_seq=1534 receive_seq=1534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000629 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.46 cputime=65.954 memavail=7404464 print_time=624.659 buffer_time=2.392 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 119 Hz
Stats 446.8: gcodein=0  mcu: mcu_awake=0.038 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=559592 bytes_read=103740 bytes_retransmit=9 bytes_invalid=0 send_seq=10433 receive_seq=10433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=7288 freq=119993179 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=10826 bytes_read=701759 bytes_retransmit=9 bytes_invalid=0 send_seq=1545 receive_seq=1545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000614 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.46 cputime=66.161 memavail=7405584 print_time=625.659 buffer_time=2.391 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 120 Hz
Stats 447.8: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=565648 bytes_read=104541 bytes_retransmit=9 bytes_invalid=0 send_seq=10535 receive_seq=10535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=9255 freq=119993182 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=10902 bytes_read=706745 bytes_retransmit=9 bytes_invalid=0 send_seq=1556 receive_seq=1556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000597 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.46 cputime=66.369 memavail=7404464 print_time=626.659 buffer_time=2.390 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 121 Hz
Stats 448.8: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=573537 bytes_read=105441 bytes_retransmit=9 bytes_invalid=0 send_seq=10666 receive_seq=10666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=6901 freq=119993176 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=10978 bytes_read=711671 bytes_retransmit=9 bytes_invalid=0 send_seq=1567 receive_seq=1567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000580 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.46 cputime=66.594 memavail=7402844 print_time=627.655 buffer_time=2.386 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 122 Hz
Stats 449.8: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=582089 bytes_read=106386 bytes_retransmit=9 bytes_invalid=0 send_seq=10806 receive_seq=10806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=3267 freq=119993179 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=11054 bytes_read=716657 bytes_retransmit=9 bytes_invalid=0 send_seq=1578 receive_seq=1578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999884 adj=12000658 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.46 cputime=66.813 memavail=7402172 print_time=628.658 buffer_time=2.387 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 123 Hz
Stats 450.8: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=589088 bytes_read=107236 bytes_retransmit=9 bytes_invalid=0 send_seq=10921 receive_seq=10921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1115 freq=119993181 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=11130 bytes_read=721583 bytes_retransmit=9 bytes_invalid=0 send_seq=1589 receive_seq=1589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999883 adj=12000727 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.43 cputime=67.024 memavail=7401276 print_time=629.660 buffer_time=2.389 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 124 Hz
Stats 451.8: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=593694 bytes_read=107866 bytes_retransmit=9 bytes_invalid=0 send_seq=10998 receive_seq=10998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1200 freq=119993176 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=11206 bytes_read=726584 bytes_retransmit=9 bytes_invalid=0 send_seq=1600 receive_seq=1600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999882 adj=12000682 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.43 cputime=67.228 memavail=7400576 print_time=630.660 buffer_time=2.389 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 125 Hz
Stats 452.8: gcodein=0  mcu: mcu_awake=0.034 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=598341 bytes_read=108512 bytes_retransmit=9 bytes_invalid=0 send_seq=11075 receive_seq=11075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=1258 freq=119993178 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=11282 bytes_read=731510 bytes_retransmit=9 bytes_invalid=0 send_seq=1611 receive_seq=1611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999881 adj=12000659 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.43 cputime=67.427 memavail=7402716 print_time=631.656 buffer_time=2.385 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 126 Hz
Stats 453.8: gcodein=0  mcu: mcu_awake=0.034 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=603035 bytes_read=109182 bytes_retransmit=9 bytes_invalid=0 send_seq=11154 receive_seq=11154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1363 freq=119993175 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=11358 bytes_read=736496 bytes_retransmit=9 bytes_invalid=0 send_seq=1622 receive_seq=1622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999884 adj=12000636 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.43 cputime=67.609 memavail=7404300 print_time=632.660 buffer_time=2.388 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 127 Hz
Stats 454.8: gcodein=0  mcu: mcu_awake=0.034 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=607733 bytes_read=109822 bytes_retransmit=9 bytes_invalid=0 send_seq=11233 receive_seq=11233 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=44 upcoming_bytes=1421 freq=119993166 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=11434 bytes_read=741422 bytes_retransmit=9 bytes_invalid=0 send_seq=1633 receive_seq=1633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999882 adj=12000656 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.43 cputime=67.789 memavail=7402668 print_time=633.658 buffer_time=2.384 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 128 Hz
Stats 455.8: gcodein=0  mcu: mcu_awake=0.034 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=612493 bytes_read=110467 bytes_retransmit=9 bytes_invalid=0 send_seq=11313 receive_seq=11313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1506 freq=119993158 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=11503 bytes_read=746385 bytes_retransmit=9 bytes_invalid=0 send_seq=1643 receive_seq=1643 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999881 adj=12000631 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.39 cputime=67.951 memavail=7400860 print_time=634.658 buffer_time=2.384 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 129 Hz
Stats 456.8: gcodein=0  mcu: mcu_awake=0.034 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=617264 bytes_read=111142 bytes_retransmit=9 bytes_invalid=0 send_seq=11393 receive_seq=11393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=1574 freq=119993168 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=11579 bytes_read=751326 bytes_retransmit=9 bytes_invalid=0 send_seq=1654 receive_seq=1654 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999879 adj=12000613 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.39 cputime=68.155 memavail=7401088 print_time=635.658 buffer_time=2.384 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Testing frequency 130 Hz
Stats 457.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=622087 bytes_read=111808 bytes_retransmit=9 bytes_invalid=0 send_seq=11474 receive_seq=11474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=1659 freq=119993163 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=11655 bytes_read=756312 bytes_retransmit=9 bytes_invalid=0 send_seq=1665 receive_seq=1665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999878 adj=12000576 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.39 cputime=68.319 memavail=7401984 print_time=636.658 buffer_time=2.383 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 131 Hz
Stats 458.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=626985 bytes_read=112458 bytes_retransmit=9 bytes_invalid=0 send_seq=11555 receive_seq=11555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1727 freq=119993162 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=11731 bytes_read=761238 bytes_retransmit=9 bytes_invalid=0 send_seq=1676 receive_seq=1676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999877 adj=12000564 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.39 cputime=68.490 memavail=7401288 print_time=637.659 buffer_time=2.383 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 132 Hz
Stats 459.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=631866 bytes_read=113138 bytes_retransmit=9 bytes_invalid=0 send_seq=11636 receive_seq=11636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=1812 freq=119993168 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=11807 bytes_read=766224 bytes_retransmit=9 bytes_invalid=0 send_seq=1687 receive_seq=1687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000555 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.39 cputime=68.698 memavail=7403312 print_time=638.661 buffer_time=2.384 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 133 Hz
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 5.000000
Re-enabled [input_shaper]
Stats 460.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=636842 bytes_read=113798 bytes_retransmit=9 bytes_invalid=0 send_seq=11719 receive_seq=11719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=282 freq=119993164 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=11883 bytes_read=771150 bytes_retransmit=9 bytes_invalid=0 send_seq=1698 receive_seq=1698 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999875 adj=12000536 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.68 cputime=68.902 memavail=7405028 print_time=639.291 buffer_time=2.014 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 461.8: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=637269 bytes_read=114108 bytes_retransmit=9 bytes_invalid=0 send_seq=11732 receive_seq=11732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993161 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=11959 bytes_read=776151 bytes_retransmit=9 bytes_invalid=0 send_seq=1709 receive_seq=1709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000527 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.68 cputime=69.013 memavail=7402760 print_time=639.291 buffer_time=1.014 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 462.8: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000019 bytes_write=637387 bytes_read=114444 bytes_retransmit=9 bytes_invalid=0 send_seq=11741 receive_seq=11741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993157 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=12035 bytes_read=781077 bytes_retransmit=9 bytes_invalid=0 send_seq=1720 receive_seq=1720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000522 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.68 cputime=69.112 memavail=7404208 print_time=639.291 buffer_time=0.013 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
accelerometer 'adxl345' measured no data
Stats 463.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000019 bytes_write=637505 bytes_read=114734 bytes_retransmit=9 bytes_invalid=0 send_seq=11750 receive_seq=11750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993152 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=12111 bytes_read=786063 bytes_retransmit=9 bytes_invalid=0 send_seq=1731 receive_seq=1731 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000518 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.68 cputime=69.266 memavail=7394884 print_time=639.291 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 464.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000019 bytes_write=637623 bytes_read=115039 bytes_retransmit=9 bytes_invalid=0 send_seq=11759 receive_seq=11759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993145 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=12187 bytes_read=790989 bytes_retransmit=9 bytes_invalid=0 send_seq=1742 receive_seq=1742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000531 heater_bed: target=0 temp=28.1 pwm=0.000  sysload=0.68 cputime=69.386 memavail=7395608 print_time=639.291 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 465.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000019 bytes_write=637741 bytes_read=115344 bytes_retransmit=9 bytes_invalid=0 send_seq=11768 receive_seq=11768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993173 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=12263 bytes_read=795975 bytes_retransmit=9 bytes_invalid=0 send_seq=1753 receive_seq=1753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000534 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.71 cputime=69.501 memavail=7395620 print_time=639.291 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 466.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000016 mcu_task_stddev=0.000019 bytes_write=637859 bytes_read=115634 bytes_retransmit=9 bytes_invalid=0 send_seq=11777 receive_seq=11777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993167 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=12332 bytes_read=800953 bytes_retransmit=9 bytes_invalid=0 send_seq=1763 receive_seq=1763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000480 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.71 cputime=69.629 memavail=7401540 print_time=639.291 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 467.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=637977 bytes_read=115947 bytes_retransmit=9 bytes_invalid=0 send_seq=11786 receive_seq=11786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993160 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=12408 bytes_read=805879 bytes_retransmit=9 bytes_invalid=0 send_seq=1774 receive_seq=1774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000495 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.71 cputime=69.735 memavail=7399272 print_time=639.291 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 468.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=638095 bytes_read=116244 bytes_retransmit=9 bytes_invalid=0 send_seq=11795 receive_seq=11795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993158 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=12484 bytes_read=810865 bytes_retransmit=9 bytes_invalid=0 send_seq=1785 receive_seq=1785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000504 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.71 cputime=69.835 memavail=7400092 print_time=639.291 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 469.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=638213 bytes_read=116532 bytes_retransmit=9 bytes_invalid=0 send_seq=11804 receive_seq=11804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993192 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=12560 bytes_read=815791 bytes_retransmit=9 bytes_invalid=0 send_seq=1796 receive_seq=1796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000552 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.71 cputime=69.946 memavail=7400588 print_time=639.291 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 470.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=638331 bytes_read=116837 bytes_retransmit=9 bytes_invalid=0 send_seq=11813 receive_seq=11813 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993224 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=12636 bytes_read=820777 bytes_retransmit=9 bytes_invalid=0 send_seq=1807 receive_seq=1807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000490 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.81 cputime=70.059 memavail=7395788 print_time=639.291 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 471.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=638449 bytes_read=117142 bytes_retransmit=9 bytes_invalid=0 send_seq=11822 receive_seq=11822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993219 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=12712 bytes_read=825718 bytes_retransmit=9 bytes_invalid=0 send_seq=1818 receive_seq=1818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000441 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.81 cputime=70.144 memavail=7396484 print_time=639.291 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 472.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=638567 bytes_read=117447 bytes_retransmit=9 bytes_invalid=0 send_seq=11831 receive_seq=11831 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993212 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=12788 bytes_read=830644 bytes_retransmit=9 bytes_invalid=0 send_seq=1829 receive_seq=1829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999878 adj=12000461 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.81 cputime=70.284 memavail=7397272 print_time=639.291 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 473.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=638685 bytes_read=117752 bytes_retransmit=9 bytes_invalid=0 send_seq=11840 receive_seq=11840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993202 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=12864 bytes_read=835630 bytes_retransmit=9 bytes_invalid=0 send_seq=1840 receive_seq=1840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999877 adj=12000633 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.81 cputime=70.408 memavail=7397792 print_time=639.291 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:mzv shaper_freq_y:26.400 damping_ratio_y:0.100000
Stats 474.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=638803 bytes_read=118057 bytes_retransmit=9 bytes_invalid=0 send_seq=11849 receive_seq=11849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993266 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=12940 bytes_read=840556 bytes_retransmit=9 bytes_invalid=0 send_seq=1851 receive_seq=1851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999875 adj=12000608 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.81 cputime=70.514 memavail=7396428 print_time=651.557 buffer_time=0.264 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
No accelerometer measurements found
Stats 475.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=638921 bytes_read=118347 bytes_retransmit=9 bytes_invalid=0 send_seq=11858 receive_seq=11858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993253 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=13016 bytes_read=845542 bytes_retransmit=9 bytes_invalid=0 send_seq=1862 receive_seq=1862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000470 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.75 cputime=70.631 memavail=7395856 print_time=653.876 buffer_time=1.582 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 476.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=639039 bytes_read=118652 bytes_retransmit=9 bytes_invalid=0 send_seq=11867 receive_seq=11867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993243 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=13092 bytes_read=850514 bytes_retransmit=9 bytes_invalid=0 send_seq=1873 receive_seq=1873 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000517 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.75 cputime=70.741 memavail=7399204 print_time=653.876 buffer_time=0.581 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
xy-axis accelerometer measured no data
Stats 477.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=639157 bytes_read=118972 bytes_retransmit=9 bytes_invalid=0 send_seq=11876 receive_seq=11876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993237 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=13168 bytes_read=855589 bytes_retransmit=9 bytes_invalid=0 send_seq=1884 receive_seq=1884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000523 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.75 cputime=70.852 memavail=7394636 print_time=653.876 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 478.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=639275 bytes_read=119262 bytes_retransmit=9 bytes_invalid=0 send_seq=11885 receive_seq=11885 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993239 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=13237 bytes_read=860579 bytes_retransmit=9 bytes_invalid=0 send_seq=1894 receive_seq=1894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000535 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.75 cputime=70.950 memavail=7394888 print_time=653.876 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 479.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=639393 bytes_read=119567 bytes_retransmit=9 bytes_invalid=0 send_seq=11894 receive_seq=11894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993243 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=13319 bytes_read=865670 bytes_retransmit=9 bytes_invalid=0 send_seq=1906 receive_seq=1906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000520 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.75 cputime=71.052 memavail=7394580 print_time=653.876 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 480.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=639511 bytes_read=119872 bytes_retransmit=9 bytes_invalid=0 send_seq=11903 receive_seq=11903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993231 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=13395 bytes_read=870684 bytes_retransmit=9 bytes_invalid=0 send_seq=1917 receive_seq=1917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000494 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.85 cputime=71.183 memavail=7399096 print_time=653.876 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 481.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=639629 bytes_read=120162 bytes_retransmit=9 bytes_invalid=0 send_seq=11912 receive_seq=11912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993220 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=13471 bytes_read=875774 bytes_retransmit=9 bytes_invalid=0 send_seq=1928 receive_seq=1928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000543 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.85 cputime=71.279 memavail=7398172 print_time=653.876 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:mzv shaper_freq_y:26.400 damping_ratio_y:0.100000
Stats 482.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=639747 bytes_read=120482 bytes_retransmit=9 bytes_invalid=0 send_seq=11921 receive_seq=11921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993208 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=13547 bytes_read=880788 bytes_retransmit=9 bytes_invalid=0 send_seq=1939 receive_seq=1939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000550 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.85 cputime=71.385 memavail=7396892 print_time=659.618 buffer_time=0.321 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
No accelerometer measurements found
Stats 483.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=639865 bytes_read=120787 bytes_retransmit=9 bytes_invalid=0 send_seq=11930 receive_seq=11930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993203 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=13623 bytes_read=885863 bytes_retransmit=9 bytes_invalid=0 send_seq=1950 receive_seq=1950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000558 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.85 cputime=71.479 memavail=7395940 print_time=661.930 buffer_time=1.632 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 484.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=639983 bytes_read=121077 bytes_retransmit=9 bytes_invalid=0 send_seq=11939 receive_seq=11939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993196 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=13699 bytes_read=890877 bytes_retransmit=9 bytes_invalid=0 send_seq=1961 receive_seq=1961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000551 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.85 cputime=71.590 memavail=7394568 print_time=661.930 buffer_time=0.631 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
xy-axis accelerometer measured no data
Stats 485.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=640101 bytes_read=121382 bytes_retransmit=9 bytes_invalid=0 send_seq=11948 receive_seq=11948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993189 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=13775 bytes_read=895952 bytes_retransmit=9 bytes_invalid=0 send_seq=1972 receive_seq=1972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000600 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.78 cputime=71.704 memavail=7395896 print_time=661.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 486.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=640219 bytes_read=121687 bytes_retransmit=9 bytes_invalid=0 send_seq=11957 receive_seq=11957 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993183 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=13851 bytes_read=900981 bytes_retransmit=9 bytes_invalid=0 send_seq=1983 receive_seq=1983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000593 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.78 cputime=71.796 memavail=7395224 print_time=661.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 487.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=640337 bytes_read=121992 bytes_retransmit=9 bytes_invalid=0 send_seq=11966 receive_seq=11966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993201 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=13927 bytes_read=906056 bytes_retransmit=9 bytes_invalid=0 send_seq=1994 receive_seq=1994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000582 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.78 cputime=71.922 memavail=7396380 print_time=661.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 488.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=640455 bytes_read=122297 bytes_retransmit=9 bytes_invalid=0 send_seq=11975 receive_seq=11975 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993248 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=14003 bytes_read=911070 bytes_retransmit=9 bytes_invalid=0 send_seq=2005 receive_seq=2005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000535 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.78 cputime=72.062 memavail=7398112 print_time=661.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 489.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=640573 bytes_read=122602 bytes_retransmit=9 bytes_invalid=0 send_seq=11984 receive_seq=11984 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993235 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=14079 bytes_read=916145 bytes_retransmit=9 bytes_invalid=0 send_seq=2016 receive_seq=2016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000451 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.78 cputime=72.166 memavail=7398512 print_time=661.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 490.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=640691 bytes_read=122892 bytes_retransmit=9 bytes_invalid=0 send_seq=11993 receive_seq=11993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993225 adxl: mcu_awake=0.108 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=14164 bytes_read=921830 bytes_retransmit=9 bytes_invalid=0 send_seq=2028 receive_seq=2027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000494 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.72 cputime=72.268 memavail=7399196 print_time=661.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
ADXL345 finished 'adxl345' measurements
Stats 491.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=640809 bytes_read=123197 bytes_retransmit=9 bytes_invalid=0 send_seq=12002 receive_seq=12002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993217 adxl: mcu_awake=0.110 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=14170 bytes_read=921936 bytes_retransmit=9 bytes_invalid=0 send_seq=2029 receive_seq=2029 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000510 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.72 cputime=72.316 memavail=7403652 print_time=661.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 492.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=640927 bytes_read=123517 bytes_retransmit=9 bytes_invalid=0 send_seq=12011 receive_seq=12011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993303 adxl: mcu_awake=0.110 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=14176 bytes_read=921952 bytes_retransmit=9 bytes_invalid=0 send_seq=2030 receive_seq=2030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000520 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.72 cputime=72.353 memavail=7402288 print_time=661.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 493.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=641045 bytes_read=123807 bytes_retransmit=9 bytes_invalid=0 send_seq=12020 receive_seq=12020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993291 adxl: mcu_awake=0.110 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=14182 bytes_read=921968 bytes_retransmit=9 bytes_invalid=0 send_seq=2031 receive_seq=2031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000390 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.72 cputime=72.404 memavail=7403724 print_time=661.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 494.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=641163 bytes_read=124112 bytes_retransmit=9 bytes_invalid=0 send_seq=12029 receive_seq=12029 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993278 adxl: mcu_awake=0.110 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=14188 bytes_read=921984 bytes_retransmit=9 bytes_invalid=0 send_seq=2032 receive_seq=2032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000457 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.72 cputime=72.451 memavail=7400604 print_time=661.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 495.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=641281 bytes_read=124417 bytes_retransmit=9 bytes_invalid=0 send_seq=12038 receive_seq=12038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993268 adxl: mcu_awake=0.110 mcu_task_avg=0.000022 mcu_task_stddev=0.000010 bytes_write=14194 bytes_read=922000 bytes_retransmit=9 bytes_invalid=0 send_seq=2033 receive_seq=2033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000494 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.66 cputime=72.491 memavail=7401780 print_time=661.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 496.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=641399 bytes_read=124707 bytes_retransmit=9 bytes_invalid=0 send_seq=12047 receive_seq=12047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993323 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=14200 bytes_read=922027 bytes_retransmit=9 bytes_invalid=0 send_seq=2034 receive_seq=2034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000527 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.66 cputime=72.527 memavail=7395900 print_time=661.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
shaper_type_x:ei shaper_freq_x:52.400 damping_ratio_x:0.100000
shaper_type_y:mzv shaper_freq_y:26.400 damping_ratio_y:0.100000
ADXL345 starting 'adxl345' measurements
Stats 497.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=641517 bytes_read=125027 bytes_retransmit=9 bytes_invalid=0 send_seq=12056 receive_seq=12056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993356 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=14380 bytes_read=933924 bytes_retransmit=9 bytes_invalid=0 send_seq=2054 receive_seq=2054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000433 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.66 cputime=72.663 memavail=7393268 print_time=674.930 buffer_time=0.622 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
accelerometer values (x, y, z): 296.082377, 306.438199, -9326.594869
Stats 498.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=641635 bytes_read=125332 bytes_retransmit=9 bytes_invalid=0 send_seq=12065 receive_seq=12065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993335 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=14456 bytes_read=952890 bytes_retransmit=9 bytes_invalid=0 send_seq=2065 receive_seq=2065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000411 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.66 cputime=72.832 memavail=7395632 print_time=677.245 buffer_time=1.936 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 499.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=641753 bytes_read=125622 bytes_retransmit=9 bytes_invalid=0 send_seq=12074 receive_seq=12074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993316 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=14532 bytes_read=971796 bytes_retransmit=9 bytes_invalid=0 send_seq=2076 receive_seq=2076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000513 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.66 cputime=73.012 memavail=7400120 print_time=677.245 buffer_time=0.936 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 500.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=641871 bytes_read=125927 bytes_retransmit=9 bytes_invalid=0 send_seq=12083 receive_seq=12083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993299 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=14617 bytes_read=990785 bytes_retransmit=9 bytes_invalid=0 send_seq=2088 receive_seq=2088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000538 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.61 cputime=73.250 memavail=7392032 print_time=677.245 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
ADXL345 finished 'adxl345' measurements
Axes noise for xy-axis accelerometer: 146.081814 (x), 142.811242 (y), 129.252113 (z)
Stats 501.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=641989 bytes_read=126232 bytes_retransmit=9 bytes_invalid=0 send_seq=12092 receive_seq=12092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993396 adxl: mcu_awake=0.302 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=14623 bytes_read=990818 bytes_retransmit=9 bytes_invalid=0 send_seq=2089 receive_seq=2089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000555 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.61 cputime=73.317 memavail=7401548 print_time=677.245 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 502.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=642107 bytes_read=126537 bytes_retransmit=9 bytes_invalid=0 send_seq=12101 receive_seq=12101 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993377 adxl: mcu_awake=0.302 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=14629 bytes_read=990834 bytes_retransmit=9 bytes_invalid=0 send_seq=2090 receive_seq=2090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000395 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.61 cputime=73.364 memavail=7392920 print_time=677.245 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
ADXL345 starting 'adxl345' measurements
Stats 503.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=642225 bytes_read=126835 bytes_retransmit=9 bytes_invalid=0 send_seq=12110 receive_seq=12110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993358 adxl: mcu_awake=0.302 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=14755 bytes_read=990965 bytes_retransmit=9 bytes_invalid=0 send_seq=2102 receive_seq=2102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2 freq=11999873 adj=12000458 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.61 cputime=73.440 memavail=7390268 print_time=680.946 buffer_time=0.634 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 10000.000000
square_corner_velocity: 5.000000
Disabled [input_shaper] for resonance testing
Testing frequency 5 Hz
Testing frequency 6 Hz
Testing frequency 7 Hz
Testing frequency 8 Hz
Testing frequency 9 Hz
Stats 504.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=649068 bytes_read=127677 bytes_retransmit=9 bytes_invalid=0 send_seq=12228 receive_seq=12228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993342 adxl: mcu_awake=0.302 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=14831 bytes_read=1009771 bytes_retransmit=9 bytes_invalid=0 send_seq=2113 receive_seq=2113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000634 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.61 cputime=73.644 memavail=7390016 print_time=684.983 buffer_time=3.670 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 505.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=649186 bytes_read=127966 bytes_retransmit=9 bytes_invalid=0 send_seq=12237 receive_seq=12237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993325 adxl: mcu_awake=0.302 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=14907 bytes_read=1028677 bytes_retransmit=9 bytes_invalid=0 send_seq=2124 receive_seq=2124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000542 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.56 cputime=73.791 memavail=7390924 print_time=684.983 buffer_time=2.670 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 506.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=650225 bytes_read=128346 bytes_retransmit=9 bytes_invalid=0 send_seq=12261 receive_seq=12261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993305 adxl: mcu_awake=0.179 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=14983 bytes_read=1047659 bytes_retransmit=9 bytes_invalid=0 send_seq=2135 receive_seq=2135 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000548 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.56 cputime=73.971 memavail=7400892 print_time=685.470 buffer_time=2.156 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 10 Hz
Stats 507.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=652489 bytes_read=128836 bytes_retransmit=9 bytes_invalid=0 send_seq=12304 receive_seq=12304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=119993291 adxl: mcu_awake=0.179 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=15059 bytes_read=1066565 bytes_retransmit=9 bytes_invalid=0 send_seq=2146 receive_seq=2146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000556 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.56 cputime=74.128 memavail=7401524 print_time=686.520 buffer_time=2.205 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 11 Hz
Stats 508.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=654682 bytes_read=129291 bytes_retransmit=9 bytes_invalid=0 send_seq=12346 receive_seq=12346 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993278 adxl: mcu_awake=0.179 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=15135 bytes_read=1085531 bytes_retransmit=9 bytes_invalid=0 send_seq=2157 receive_seq=2157 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000561 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.56 cputime=74.369 memavail=7395348 print_time=687.495 buffer_time=2.180 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 12 Hz
Stats 509.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=657199 bytes_read=129786 bytes_retransmit=9 bytes_invalid=0 send_seq=12393 receive_seq=12393 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=119993273 adxl: mcu_awake=0.179 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=15211 bytes_read=1104497 bytes_retransmit=9 bytes_invalid=0 send_seq=2168 receive_seq=2168 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000574 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.56 cputime=74.590 memavail=7402576 print_time=688.555 buffer_time=2.238 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 13 Hz
Stats 510.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=659676 bytes_read=130292 bytes_retransmit=9 bytes_invalid=0 send_seq=12440 receive_seq=12440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993332 adxl: mcu_awake=0.179 mcu_task_avg=0.000023 mcu_task_stddev=0.000009 bytes_write=15287 bytes_read=1123403 bytes_retransmit=9 bytes_invalid=0 send_seq=2179 receive_seq=2179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000570 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.51 cputime=74.766 memavail=7399896 print_time=689.550 buffer_time=2.233 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 14 Hz
Stats 511.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=662358 bytes_read=130787 bytes_retransmit=9 bytes_invalid=0 send_seq=12490 receive_seq=12490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993316 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=15363 bytes_read=1142386 bytes_retransmit=9 bytes_invalid=0 send_seq=2190 receive_seq=2190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000484 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.51 cputime=74.953 memavail=7401800 print_time=690.579 buffer_time=2.262 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 15 Hz
Stats 512.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=664979 bytes_read=131308 bytes_retransmit=9 bytes_invalid=0 send_seq=12539 receive_seq=12539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993297 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=15439 bytes_read=1161292 bytes_retransmit=9 bytes_invalid=0 send_seq=2201 receive_seq=2201 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000502 heater_bed: target=0 temp=28.0 pwm=0.000  sysload=0.51 cputime=75.156 memavail=7402052 print_time=691.557 buffer_time=2.240 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 16 Hz
Stats 513.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=667765 bytes_read=131823 bytes_retransmit=9 bytes_invalid=0 send_seq=12590 receive_seq=12590 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993334 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=15515 bytes_read=1180258 bytes_retransmit=9 bytes_invalid=0 send_seq=2212 receive_seq=2212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000521 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.51 cputime=75.343 memavail=7402500 print_time=692.583 buffer_time=2.265 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 17 Hz
Stats 514.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=670635 bytes_read=132333 bytes_retransmit=9 bytes_invalid=0 send_seq=12643 receive_seq=12643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993322 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=15591 bytes_read=1199284 bytes_retransmit=9 bytes_invalid=0 send_seq=2223 receive_seq=2223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000556 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.51 cputime=75.575 memavail=7399704 print_time=693.591 buffer_time=2.266 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 18 Hz
Stats 515.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=673442 bytes_read=132848 bytes_retransmit=9 bytes_invalid=0 send_seq=12694 receive_seq=12694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993312 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=15667 bytes_read=1218430 bytes_retransmit=9 bytes_invalid=0 send_seq=2234 receive_seq=2234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000555 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.47 cputime=75.813 memavail=7401420 print_time=694.599 buffer_time=2.264 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 19 Hz
Stats 516.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=676618 bytes_read=133398 bytes_retransmit=9 bytes_invalid=0 send_seq=12752 receive_seq=12752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993296 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=15743 bytes_read=1237353 bytes_retransmit=9 bytes_invalid=0 send_seq=2245 receive_seq=2245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000556 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.47 cputime=76.047 memavail=7399576 print_time=695.605 buffer_time=2.269 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 20 Hz
Stats 517.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=679517 bytes_read=133919 bytes_retransmit=9 bytes_invalid=0 send_seq=12804 receive_seq=12804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993285 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=15812 bytes_read=1256296 bytes_retransmit=9 bytes_invalid=0 send_seq=2255 receive_seq=2255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000564 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.47 cputime=76.297 memavail=7398456 print_time=696.623 buffer_time=2.287 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 21 Hz
Stats 518.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=682705 bytes_read=134464 bytes_retransmit=9 bytes_invalid=0 send_seq=12861 receive_seq=12861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993275 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=15888 bytes_read=1275262 bytes_retransmit=9 bytes_invalid=0 send_seq=2266 receive_seq=2266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000589 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.47 cputime=76.527 memavail=7398236 print_time=697.628 buffer_time=2.290 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Testing frequency 22 Hz
Stats 519.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=685901 bytes_read=135014 bytes_retransmit=9 bytes_invalid=0 send_seq=12919 receive_seq=12919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993260 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=15964 bytes_read=1294168 bytes_retransmit=9 bytes_invalid=0 send_seq=2277 receive_seq=2277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000585 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.47 cputime=76.767 memavail=7403008 print_time=698.622 buffer_time=2.282 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 23 Hz
Stats 520.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=689076 bytes_read=135539 bytes_retransmit=9 bytes_invalid=0 send_seq=12975 receive_seq=12975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993251 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=16040 bytes_read=1313134 bytes_retransmit=9 bytes_invalid=0 send_seq=2288 receive_seq=2288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000587 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.91 cputime=77.017 memavail=7402084 print_time=699.626 buffer_time=2.286 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 24 Hz
Stats 521.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=692619 bytes_read=136109 bytes_retransmit=9 bytes_invalid=0 send_seq=13037 receive_seq=13037 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119993309 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=16116 bytes_read=1332057 bytes_retransmit=9 bytes_invalid=0 send_seq=2299 receive_seq=2299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000590 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.91 cputime=77.261 memavail=7403772 print_time=700.640 buffer_time=2.299 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 25 Hz
Stats 522.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=696036 bytes_read=136695 bytes_retransmit=9 bytes_invalid=0 send_seq=13099 receive_seq=13099 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993320 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=16192 bytes_read=1351023 bytes_retransmit=9 bytes_invalid=0 send_seq=2310 receive_seq=2310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000506 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.91 cputime=77.500 memavail=7401984 print_time=701.634 buffer_time=2.292 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 26 Hz
Stats 523.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=699389 bytes_read=137240 bytes_retransmit=9 bytes_invalid=0 send_seq=13159 receive_seq=13159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993301 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=16268 bytes_read=1369929 bytes_retransmit=9 bytes_invalid=0 send_seq=2321 receive_seq=2321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000535 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.91 cputime=77.732 memavail=7400564 print_time=702.637 buffer_time=2.295 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 27 Hz
Stats 524.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=702992 bytes_read=137815 bytes_retransmit=9 bytes_invalid=0 send_seq=13222 receive_seq=13222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=119993284 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=16344 bytes_read=1388895 bytes_retransmit=9 bytes_invalid=0 send_seq=2332 receive_seq=2332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000558 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.91 cputime=77.978 memavail=7400680 print_time=703.650 buffer_time=2.306 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 28 Hz
Stats 525.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=706794 bytes_read=138410 bytes_retransmit=9 bytes_invalid=0 send_seq=13289 receive_seq=13289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=0 freq=119993271 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=16420 bytes_read=1407801 bytes_retransmit=9 bytes_invalid=0 send_seq=2343 receive_seq=2343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000565 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.84 cputime=78.232 memavail=7399072 print_time=704.652 buffer_time=2.308 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 29 Hz
Stats 526.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=710161 bytes_read=138960 bytes_retransmit=9 bytes_invalid=0 send_seq=13350 receive_seq=13350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119993260 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=16496 bytes_read=1426784 bytes_retransmit=9 bytes_invalid=0 send_seq=2354 receive_seq=2354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000568 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.84 cputime=78.474 memavail=7399500 print_time=705.655 buffer_time=2.310 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 30 Hz
Stats 527.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=713845 bytes_read=139561 bytes_retransmit=9 bytes_invalid=0 send_seq=13415 receive_seq=13415 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=119993245 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=16572 bytes_read=1445690 bytes_retransmit=9 bytes_invalid=0 send_seq=2365 receive_seq=2365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000605 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.84 cputime=78.707 memavail=7396952 print_time=706.649 buffer_time=2.303 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 31 Hz
Stats 528.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=717858 bytes_read=140171 bytes_retransmit=9 bytes_invalid=0 send_seq=13485 receive_seq=13485 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=119993231 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=16648 bytes_read=1464656 bytes_retransmit=9 bytes_invalid=0 send_seq=2376 receive_seq=2376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000602 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.84 cputime=78.955 memavail=7398336 print_time=707.651 buffer_time=2.304 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 32 Hz
Stats 529.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=722028 bytes_read=140776 bytes_retransmit=9 bytes_invalid=0 send_seq=13557 receive_seq=13557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=119993217 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=16717 bytes_read=1483599 bytes_retransmit=9 bytes_invalid=0 send_seq=2386 receive_seq=2386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000598 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.84 cputime=79.283 memavail=7397132 print_time=708.653 buffer_time=2.305 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 33 Hz
Stats 530.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=726201 bytes_read=141396 bytes_retransmit=9 bytes_invalid=0 send_seq=13629 receive_seq=13629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=119993203 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=16793 bytes_read=1502505 bytes_retransmit=9 bytes_invalid=0 send_seq=2397 receive_seq=2397 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000596 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.77 cputime=79.502 memavail=7397244 print_time=709.648 buffer_time=2.299 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 34 Hz
Stats 531.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=730014 bytes_read=141996 bytes_retransmit=9 bytes_invalid=0 send_seq=13697 receive_seq=13697 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119993193 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=16869 bytes_read=1521488 bytes_retransmit=9 bytes_invalid=0 send_seq=2408 receive_seq=2408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000595 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.77 cputime=79.709 memavail=7398224 print_time=710.665 buffer_time=2.315 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 35 Hz
Stats 532.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=733767 bytes_read=142592 bytes_retransmit=9 bytes_invalid=0 send_seq=13764 receive_seq=13764 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=119993225 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=16945 bytes_read=1540454 bytes_retransmit=9 bytes_invalid=0 send_seq=2419 receive_seq=2419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999875 adj=12000679 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.77 cputime=79.898 memavail=7397832 print_time=711.652 buffer_time=2.302 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 36 Hz
Stats 533.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=737706 bytes_read=143207 bytes_retransmit=9 bytes_invalid=0 send_seq=13835 receive_seq=13835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993210 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=17021 bytes_read=1559360 bytes_retransmit=9 bytes_invalid=0 send_seq=2430 receive_seq=2430 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000607 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.77 cputime=80.134 memavail=7394228 print_time=712.668 buffer_time=2.317 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 37 Hz
Stats 534.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=741654 bytes_read=143822 bytes_retransmit=9 bytes_invalid=0 send_seq=13906 receive_seq=13906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=119993197 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=17097 bytes_read=1578266 bytes_retransmit=9 bytes_invalid=0 send_seq=2441 receive_seq=2441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000599 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.77 cputime=80.351 memavail=7393796 print_time=713.656 buffer_time=2.305 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 38 Hz
Stats 535.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=745735 bytes_read=144427 bytes_retransmit=9 bytes_invalid=0 send_seq=13978 receive_seq=13978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=48 freq=119993184 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=17173 bytes_read=1597232 bytes_retransmit=9 bytes_invalid=0 send_seq=2452 receive_seq=2452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999882 adj=12000594 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.79 cputime=80.558 memavail=7391732 print_time=714.671 buffer_time=2.319 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 39 Hz
Stats 536.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000020 mcu_task_stddev=0.000020 bytes_write=749730 bytes_read=145027 bytes_retransmit=9 bytes_invalid=0 send_seq=14046 receive_seq=14046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=474 freq=119993231 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=17249 bytes_read=1616215 bytes_retransmit=9 bytes_invalid=0 send_seq=2463 receive_seq=2463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999880 adj=12000710 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.79 cputime=80.774 memavail=7391704 print_time=715.659 buffer_time=2.306 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 40 Hz
Stats 537.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=754007 bytes_read=145663 bytes_retransmit=9 bytes_invalid=0 send_seq=14118 receive_seq=14118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1214 freq=119993218 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=17325 bytes_read=1635121 bytes_retransmit=9 bytes_invalid=0 send_seq=2474 receive_seq=2474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999878 adj=12000611 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.79 cputime=81.025 memavail=7391804 print_time=716.673 buffer_time=2.319 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 41 Hz
Stats 538.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=758454 bytes_read=146291 bytes_retransmit=9 bytes_invalid=0 send_seq=14195 receive_seq=14195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=1749 freq=119993208 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=17401 bytes_read=1654087 bytes_retransmit=9 bytes_invalid=0 send_seq=2485 receive_seq=2485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999877 adj=12000595 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.79 cputime=81.246 memavail=7391948 print_time=717.674 buffer_time=2.319 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 42 Hz
Stats 539.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=763751 bytes_read=147003 bytes_retransmit=9 bytes_invalid=0 send_seq=14287 receive_seq=14287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=695 freq=119993196 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=17477 bytes_read=1672993 bytes_retransmit=9 bytes_invalid=0 send_seq=2496 receive_seq=2496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000583 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.79 cputime=81.474 memavail=7389196 print_time=718.676 buffer_time=2.319 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 43 Hz
Stats 540.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=768815 bytes_read=147706 bytes_retransmit=9 bytes_invalid=0 send_seq=14377 receive_seq=14377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=119993189 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=17553 bytes_read=1691959 bytes_retransmit=9 bytes_invalid=0 send_seq=2507 receive_seq=2507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999885 adj=12000577 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.81 cputime=81.761 memavail=7387328 print_time=719.677 buffer_time=2.319 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 44 Hz
Stats 541.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000019 mcu_task_stddev=0.000020 bytes_write=772964 bytes_read=148326 bytes_retransmit=9 bytes_invalid=0 send_seq=14452 receive_seq=14452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119993179 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=17635 bytes_read=1711018 bytes_retransmit=9 bytes_invalid=0 send_seq=2519 receive_seq=2519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999882 adj=12000697 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.81 cputime=82.029 memavail=7386572 print_time=720.678 buffer_time=2.318 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 45 Hz
Stats 542.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=777154 bytes_read=148987 bytes_retransmit=9 bytes_invalid=0 send_seq=14526 receive_seq=14526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=119993167 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=17704 bytes_read=1729901 bytes_retransmit=9 bytes_invalid=0 send_seq=2529 receive_seq=2529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999881 adj=12000644 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.81 cputime=82.279 memavail=7388036 print_time=721.668 buffer_time=2.307 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 46 Hz
Stats 543.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=781383 bytes_read=149592 bytes_retransmit=9 bytes_invalid=0 send_seq=14598 receive_seq=14598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=161 freq=119993167 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=17780 bytes_read=1748992 bytes_retransmit=9 bytes_invalid=0 send_seq=2540 receive_seq=2540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999881 adj=12000631 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.81 cputime=82.542 memavail=7387536 print_time=722.680 buffer_time=2.319 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 47 Hz
Stats 544.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=785554 bytes_read=150197 bytes_retransmit=9 bytes_invalid=0 send_seq=14670 receive_seq=14670 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=294 freq=119993163 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=17856 bytes_read=1768280 bytes_retransmit=9 bytes_invalid=0 send_seq=2551 receive_seq=2551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999879 adj=12000625 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.81 cputime=82.798 memavail=7386528 print_time=723.670 buffer_time=2.309 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 48 Hz
Stats 545.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=789805 bytes_read=150832 bytes_retransmit=9 bytes_invalid=0 send_seq=14742 receive_seq=14742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=1102 freq=119993159 adxl: mcu_awake=0.415 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=17932 bytes_read=1787507 bytes_retransmit=9 bytes_invalid=0 send_seq=2562 receive_seq=2562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999878 adj=12000600 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.82 cputime=83.064 memavail=7387480 print_time=724.676 buffer_time=2.314 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 49 Hz
Stats 546.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=794031 bytes_read=151432 bytes_retransmit=9 bytes_invalid=0 send_seq=14813 receive_seq=14813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=2124 freq=119993198 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18008 bytes_read=1806812 bytes_retransmit=9 bytes_invalid=0 send_seq=2573 receive_seq=2573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000580 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.82 cputime=83.374 memavail=7385608 print_time=725.682 buffer_time=2.319 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 50 Hz
Stats 547.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=798845 bytes_read=152098 bytes_retransmit=9 bytes_invalid=0 send_seq=14894 receive_seq=14894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=2728 freq=119993199 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18084 bytes_read=1826039 bytes_retransmit=9 bytes_invalid=0 send_seq=2584 receive_seq=2584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999875 adj=12000515 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.82 cputime=83.665 memavail=7387392 print_time=726.683 buffer_time=2.319 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 51 Hz
Stats 548.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=804155 bytes_read=152808 bytes_retransmit=9 bytes_invalid=0 send_seq=14981 receive_seq=14981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=2723 freq=119993192 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18160 bytes_read=1845327 bytes_retransmit=9 bytes_invalid=0 send_seq=2595 receive_seq=2595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000504 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.82 cputime=83.948 memavail=7386216 print_time=727.684 buffer_time=2.319 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 52 Hz
Stats 549.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=809830 bytes_read=153533 bytes_retransmit=9 bytes_invalid=0 send_seq=15077 receive_seq=15077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=2392 freq=119993185 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18236 bytes_read=1864554 bytes_retransmit=9 bytes_invalid=0 send_seq=2606 receive_seq=2606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000508 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.82 cputime=84.234 memavail=7383864 print_time=728.684 buffer_time=2.319 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 53 Hz
Stats 550.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=815229 bytes_read=154228 bytes_retransmit=9 bytes_invalid=0 send_seq=15167 receive_seq=15167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2100 freq=119993186 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18312 bytes_read=1883842 bytes_retransmit=9 bytes_invalid=0 send_seq=2617 receive_seq=2617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000512 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.84 cputime=84.536 memavail=7381712 print_time=729.680 buffer_time=2.314 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 54 Hz
Stats 551.9: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=820490 bytes_read=154968 bytes_retransmit=9 bytes_invalid=0 send_seq=15260 receive_seq=15260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=1172 freq=119993181 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18388 bytes_read=1903086 bytes_retransmit=9 bytes_invalid=0 send_seq=2628 receive_seq=2628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000516 heater_bed: target=0 temp=27.9 pwm=0.000  sysload=0.84 cputime=84.841 memavail=7383564 print_time=730.686 buffer_time=2.319 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 55 Hz
Stats 552.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=826054 bytes_read=155724 bytes_retransmit=9 bytes_invalid=0 send_seq=15359 receive_seq=15359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=119993198 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18464 bytes_read=1922374 bytes_retransmit=9 bytes_invalid=0 send_seq=2639 receive_seq=2639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000519 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.84 cputime=85.105 memavail=7381724 print_time=731.677 buffer_time=2.308 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Testing frequency 56 Hz
Stats 553.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=830515 bytes_read=156374 bytes_retransmit=9 bytes_invalid=0 send_seq=15440 receive_seq=15440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=119993263 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18533 bytes_read=1941638 bytes_retransmit=9 bytes_invalid=0 send_seq=2649 receive_seq=2649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000504 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.84 cputime=85.339 memavail=7379820 print_time=732.687 buffer_time=2.317 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 57 Hz
Stats 554.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=834913 bytes_read=157054 bytes_retransmit=9 bytes_invalid=0 send_seq=15521 receive_seq=15521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=87 freq=119993249 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18609 bytes_read=1960865 bytes_retransmit=9 bytes_invalid=0 send_seq=2660 receive_seq=2660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000440 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.84 cputime=85.600 memavail=7379676 print_time=733.687 buffer_time=2.317 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 58 Hz
Stats 555.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=839271 bytes_read=157699 bytes_retransmit=9 bytes_invalid=0 send_seq=15601 receive_seq=15601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=254 freq=119993235 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18685 bytes_read=1980153 bytes_retransmit=9 bytes_invalid=0 send_seq=2671 receive_seq=2671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000463 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.77 cputime=85.860 memavail=7378948 print_time=734.688 buffer_time=2.318 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 59 Hz
Stats 556.9: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=843744 bytes_read=158354 bytes_retransmit=9 bytes_invalid=0 send_seq=15683 receive_seq=15683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=385 freq=119993268 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18761 bytes_read=1999397 bytes_retransmit=9 bytes_invalid=0 send_seq=2682 receive_seq=2682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000482 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.77 cputime=86.131 memavail=7379636 print_time=735.680 buffer_time=2.309 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 60 Hz
Stats 557.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=848001 bytes_read=159010 bytes_retransmit=9 bytes_invalid=0 send_seq=15757 receive_seq=15756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1391 freq=119993253 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18837 bytes_read=2018685 bytes_retransmit=9 bytes_invalid=0 send_seq=2693 receive_seq=2693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000449 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.77 cputime=86.415 memavail=7380220 print_time=736.689 buffer_time=2.317 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 61 Hz
Stats 559.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=852165 bytes_read=159615 bytes_retransmit=9 bytes_invalid=0 send_seq=15828 receive_seq=15828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=2530 freq=119993246 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18913 bytes_read=2037912 bytes_retransmit=9 bytes_invalid=0 send_seq=2704 receive_seq=2704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000475 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.77 cputime=86.691 memavail=7377648 print_time=737.690 buffer_time=2.316 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 62 Hz
Stats 560.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=857122 bytes_read=160280 bytes_retransmit=9 bytes_invalid=0 send_seq=15912 receive_seq=15912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=3040 freq=119993235 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=18989 bytes_read=2057200 bytes_retransmit=9 bytes_invalid=0 send_seq=2715 receive_seq=2715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000502 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.77 cputime=86.960 memavail=7379536 print_time=738.690 buffer_time=2.316 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 63 Hz
Stats 561.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=862551 bytes_read=161015 bytes_retransmit=9 bytes_invalid=0 send_seq=16004 receive_seq=16004 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=3216 freq=119993242 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=19065 bytes_read=2076427 bytes_retransmit=9 bytes_invalid=0 send_seq=2726 receive_seq=2726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000514 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.11 cputime=87.266 memavail=7377160 print_time=739.691 buffer_time=2.316 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 64 Hz
Stats 562.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000019 mcu_task_stddev=0.000019 bytes_write=868059 bytes_read=161725 bytes_retransmit=9 bytes_invalid=0 send_seq=16097 receive_seq=16097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3400 freq=119993230 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=19141 bytes_read=2095793 bytes_retransmit=9 bytes_invalid=0 send_seq=2737 receive_seq=2737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000500 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.11 cputime=87.648 memavail=7378284 print_time=740.691 buffer_time=2.315 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 65 Hz
Stats 563.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=873647 bytes_read=162456 bytes_retransmit=9 bytes_invalid=0 send_seq=16192 receive_seq=16191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3567 freq=119993217 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=19217 bytes_read=2115081 bytes_retransmit=9 bytes_invalid=0 send_seq=2748 receive_seq=2748 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000511 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.11 cputime=87.859 memavail=7375040 print_time=741.691 buffer_time=2.316 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 66 Hz
Stats 564.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=879265 bytes_read=163211 bytes_retransmit=9 bytes_invalid=0 send_seq=16287 receive_seq=16287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=3727 freq=119993212 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=19293 bytes_read=2134308 bytes_retransmit=9 bytes_invalid=0 send_seq=2759 receive_seq=2759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000525 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.11 cputime=88.077 memavail=7375468 print_time=742.688 buffer_time=2.309 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 67 Hz
Stats 565.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=885101 bytes_read=163946 bytes_retransmit=9 bytes_invalid=0 send_seq=16385 receive_seq=16385 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=24 upcoming_bytes=3863 freq=119993200 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=19369 bytes_read=2153718 bytes_retransmit=9 bytes_invalid=0 send_seq=2770 receive_seq=2770 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000577 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=1.11 cputime=88.335 memavail=7373536 print_time=743.689 buffer_time=2.300 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 68 Hz
Stats 566.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=890966 bytes_read=164701 bytes_retransmit=9 bytes_invalid=0 send_seq=16484 receive_seq=16484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=4040 freq=119993220 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=19445 bytes_read=2172945 bytes_retransmit=9 bytes_invalid=0 send_seq=2781 receive_seq=2781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000576 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.02 cputime=88.562 memavail=7374344 print_time=744.689 buffer_time=2.300 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 69 Hz
Stats 567.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=896854 bytes_read=165456 bytes_retransmit=9 bytes_invalid=0 send_seq=16583 receive_seq=16583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=4240 freq=119993214 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=19514 bytes_read=2192226 bytes_retransmit=9 bytes_invalid=0 send_seq=2791 receive_seq=2791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000537 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.02 cputime=88.807 memavail=7372468 print_time=745.693 buffer_time=2.303 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 70 Hz
Stats 568.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=902884 bytes_read=166227 bytes_retransmit=9 bytes_invalid=0 send_seq=16685 receive_seq=16685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=4142 freq=119993201 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=19590 bytes_read=2211453 bytes_retransmit=9 bytes_invalid=0 send_seq=2802 receive_seq=2802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000533 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.02 cputime=89.047 memavail=7373408 print_time=746.694 buffer_time=2.303 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 71 Hz
Stats 569.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=909360 bytes_read=167047 bytes_retransmit=9 bytes_invalid=0 send_seq=16797 receive_seq=16797 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=18 upcoming_bytes=3171 freq=119993194 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=19666 bytes_read=2230741 bytes_retransmit=9 bytes_invalid=0 send_seq=2813 receive_seq=2813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000540 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.02 cputime=89.295 memavail=7372216 print_time=747.687 buffer_time=2.296 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 72 Hz
Stats 570.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=915802 bytes_read=167862 bytes_retransmit=9 bytes_invalid=0 send_seq=16908 receive_seq=16908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=2629 freq=119993183 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=19742 bytes_read=2249968 bytes_retransmit=9 bytes_invalid=0 send_seq=2824 receive_seq=2824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000551 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=1.02 cputime=89.513 memavail=7371860 print_time=748.694 buffer_time=2.302 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Testing frequency 73 Hz
Stats 571.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=920950 bytes_read=168547 bytes_retransmit=9 bytes_invalid=0 send_seq=16996 receive_seq=16996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=3873 freq=119993241 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=19818 bytes_read=2269256 bytes_retransmit=9 bytes_invalid=0 send_seq=2835 receive_seq=2835 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000554 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.94 cputime=89.786 memavail=7373644 print_time=749.695 buffer_time=2.301 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 74 Hz
Stats 572.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=926143 bytes_read=169247 bytes_retransmit=9 bytes_invalid=0 send_seq=17084 receive_seq=17084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=3891 freq=119993227 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=19894 bytes_read=2288500 bytes_retransmit=9 bytes_invalid=0 send_seq=2846 receive_seq=2846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000476 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.94 cputime=90.046 memavail=7373868 print_time=750.695 buffer_time=2.301 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 75 Hz
Stats 573.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=933018 bytes_read=170123 bytes_retransmit=9 bytes_invalid=0 send_seq=17204 receive_seq=17204 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=26 upcoming_bytes=1586 freq=119993217 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=19970 bytes_read=2307788 bytes_retransmit=9 bytes_invalid=0 send_seq=2857 receive_seq=2857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000507 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.94 cputime=90.369 memavail=7370652 print_time=751.692 buffer_time=2.297 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Testing frequency 76 Hz
Stats 574.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=939127 bytes_read=170919 bytes_retransmit=9 bytes_invalid=0 send_seq=17312 receive_seq=17312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=55 freq=119993206 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=20046 bytes_read=2327015 bytes_retransmit=9 bytes_invalid=0 send_seq=2868 receive_seq=2868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000525 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.94 cputime=90.654 memavail=7370812 print_time=752.696 buffer_time=2.301 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 77 Hz
Stats 575.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=943507 bytes_read=171573 bytes_retransmit=9 bytes_invalid=0 send_seq=17392 receive_seq=17392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=140 freq=119993201 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=20122 bytes_read=2346303 bytes_retransmit=9 bytes_invalid=0 send_seq=2879 receive_seq=2879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000533 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.94 cputime=90.940 memavail=7368660 print_time=753.689 buffer_time=2.294 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 78 Hz
Stats 576.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=947909 bytes_read=172225 bytes_retransmit=9 bytes_invalid=0 send_seq=17472 receive_seq=17472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=279 freq=119993188 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=20198 bytes_read=2365530 bytes_retransmit=9 bytes_invalid=0 send_seq=2890 receive_seq=2890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000536 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.94 cputime=91.217 memavail=7366056 print_time=754.696 buffer_time=2.300 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 79 Hz
Stats 577.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=952429 bytes_read=172876 bytes_retransmit=9 bytes_invalid=0 send_seq=17554 receive_seq=17554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=364 freq=119993180 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=20274 bytes_read=2384835 bytes_retransmit=9 bytes_invalid=0 send_seq=2901 receive_seq=2901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000546 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.94 cputime=91.505 memavail=7364880 print_time=755.693 buffer_time=2.292 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 80 Hz
Stats 578.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=956963 bytes_read=173557 bytes_retransmit=9 bytes_invalid=0 send_seq=17635 receive_seq=17635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=485 freq=119993177 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=20343 bytes_read=2404160 bytes_retransmit=9 bytes_invalid=0 send_seq=2911 receive_seq=2911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000550 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.94 cputime=91.783 memavail=7363964 print_time=756.697 buffer_time=2.293 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 81 Hz
Stats 579.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=961559 bytes_read=174232 bytes_retransmit=9 bytes_invalid=0 send_seq=17718 receive_seq=17718 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=35 upcoming_bytes=582 freq=119993174 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=20419 bytes_read=2423387 bytes_retransmit=9 bytes_invalid=0 send_seq=2922 receive_seq=2922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000589 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.94 cputime=92.068 memavail=7367616 print_time=757.691 buffer_time=2.287 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 82 Hz
Stats 580.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=966238 bytes_read=174897 bytes_retransmit=9 bytes_invalid=0 send_seq=17802 receive_seq=17802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=719 freq=119993169 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=20495 bytes_read=2442675 bytes_retransmit=9 bytes_invalid=0 send_seq=2933 receive_seq=2933 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000577 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.94 cputime=92.374 memavail=7365324 print_time=758.697 buffer_time=2.292 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Testing frequency 83 Hz
Stats 581.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=970948 bytes_read=175582 bytes_retransmit=9 bytes_invalid=0 send_seq=17887 receive_seq=17887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=832 freq=119993159 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=20571 bytes_read=2461902 bytes_retransmit=9 bytes_invalid=0 send_seq=2944 receive_seq=2944 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000573 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.95 cputime=92.669 memavail=7363672 print_time=759.698 buffer_time=2.292 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 84 Hz
Stats 582.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=975684 bytes_read=176267 bytes_retransmit=9 bytes_invalid=0 send_seq=17972 receive_seq=17972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=936 freq=119993235 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=20647 bytes_read=2481207 bytes_retransmit=9 bytes_invalid=0 send_seq=2955 receive_seq=2955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000579 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.95 cputime=92.943 memavail=7365500 print_time=760.695 buffer_time=2.289 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Testing frequency 85 Hz
Stats 583.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=980534 bytes_read=176963 bytes_retransmit=9 bytes_invalid=0 send_seq=18059 receive_seq=18059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1031 freq=119993220 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=20723 bytes_read=2500434 bytes_retransmit=9 bytes_invalid=0 send_seq=2966 receive_seq=2966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000497 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.95 cputime=93.222 memavail=7363828 print_time=761.692 buffer_time=2.286 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 86 Hz
Stats 584.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=985379 bytes_read=177653 bytes_retransmit=9 bytes_invalid=0 send_seq=18145 receive_seq=18145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1180 freq=119993227 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=20799 bytes_read=2519722 bytes_retransmit=9 bytes_invalid=0 send_seq=2977 receive_seq=2977 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000517 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.95 cputime=93.544 memavail=7361728 print_time=762.698 buffer_time=2.291 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 87 Hz
Stats 585.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=990312 bytes_read=178353 bytes_retransmit=9 bytes_invalid=0 send_seq=18233 receive_seq=18233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1291 freq=119993220 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=20875 bytes_read=2538949 bytes_retransmit=9 bytes_invalid=0 send_seq=2988 receive_seq=2988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000505 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.95 cputime=93.841 memavail=7360336 print_time=763.699 buffer_time=2.290 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 88 Hz
Stats 586.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=995333 bytes_read=179048 bytes_retransmit=9 bytes_invalid=0 send_seq=18323 receive_seq=18323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1404 freq=119993205 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=20951 bytes_read=2558176 bytes_retransmit=9 bytes_invalid=0 send_seq=2999 receive_seq=2999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000518 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.95 cputime=94.097 memavail=7361160 print_time=764.699 buffer_time=2.291 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 89 Hz
Stats 587.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000019 bytes_write=1000354 bytes_read=179758 bytes_retransmit=9 bytes_invalid=0 send_seq=18413 receive_seq=18413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1508 freq=119993195 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=21027 bytes_read=2577481 bytes_retransmit=9 bytes_invalid=0 send_seq=3010 receive_seq=3010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000541 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.95 cputime=94.387 memavail=7359708 print_time=765.696 buffer_time=2.288 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 90 Hz
Stats 588.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1005489 bytes_read=180494 bytes_retransmit=9 bytes_invalid=0 send_seq=18505 receive_seq=18505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1629 freq=119993183 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=21096 bytes_read=2596684 bytes_retransmit=9 bytes_invalid=0 send_seq=3020 receive_seq=3020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000578 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.95 cputime=94.637 memavail=7360352 print_time=766.699 buffer_time=2.291 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 91 Hz
Stats 589.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1010619 bytes_read=181194 bytes_retransmit=9 bytes_invalid=0 send_seq=18596 receive_seq=18596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1726 freq=119993175 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=21172 bytes_read=2615911 bytes_retransmit=9 bytes_invalid=0 send_seq=3031 receive_seq=3031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000576 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.95 cputime=94.927 memavail=7361892 print_time=767.694 buffer_time=2.285 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 92 Hz
Stats 590.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1015832 bytes_read=181914 bytes_retransmit=9 bytes_invalid=0 send_seq=18688 receive_seq=18688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1863 freq=119993169 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=21248 bytes_read=2635199 bytes_retransmit=9 bytes_invalid=0 send_seq=3042 receive_seq=3042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000571 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.95 cputime=95.175 memavail=7358928 print_time=768.700 buffer_time=2.289 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 93 Hz
Stats 591.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1021086 bytes_read=182649 bytes_retransmit=9 bytes_invalid=0 send_seq=18783 receive_seq=18783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=1976 freq=119993162 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=21324 bytes_read=2654426 bytes_retransmit=9 bytes_invalid=0 send_seq=3053 receive_seq=3053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000566 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.96 cputime=95.465 memavail=7360580 print_time=769.697 buffer_time=2.287 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 94 Hz
Stats 592.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1026475 bytes_read=183374 bytes_retransmit=9 bytes_invalid=0 send_seq=18879 receive_seq=18879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2097 freq=119993166 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=21400 bytes_read=2673731 bytes_retransmit=9 bytes_invalid=0 send_seq=3064 receive_seq=3064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000570 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.96 cputime=95.764 memavail=7357560 print_time=770.700 buffer_time=2.289 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 95 Hz
Stats 593.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1031838 bytes_read=184130 bytes_retransmit=9 bytes_invalid=0 send_seq=18975 receive_seq=18975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=2194 freq=119993193 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=21476 bytes_read=2692958 bytes_retransmit=9 bytes_invalid=0 send_seq=3075 receive_seq=3075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000569 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.96 cputime=96.088 memavail=7355688 print_time=771.698 buffer_time=2.285 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Testing frequency 96 Hz
Stats 594.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1037284 bytes_read=184875 bytes_retransmit=9 bytes_invalid=0 send_seq=19072 receive_seq=19072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=2333 freq=119993183 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=21552 bytes_read=2712246 bytes_retransmit=9 bytes_invalid=0 send_seq=3086 receive_seq=3086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000531 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.96 cputime=96.415 memavail=7354516 print_time=772.700 buffer_time=2.288 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 97 Hz
Stats 595.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1042813 bytes_read=185610 bytes_retransmit=9 bytes_invalid=0 send_seq=19170 receive_seq=19170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2418 freq=119993172 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=21628 bytes_read=2731473 bytes_retransmit=9 bytes_invalid=0 send_seq=3097 receive_seq=3097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000544 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.96 cputime=96.726 memavail=7355212 print_time=773.698 buffer_time=2.285 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 98 Hz
Stats 596.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1048368 bytes_read=186360 bytes_retransmit=9 bytes_invalid=0 send_seq=19268 receive_seq=19268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2548 freq=119993164 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=21704 bytes_read=2750700 bytes_retransmit=9 bytes_invalid=0 send_seq=3108 receive_seq=3108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000558 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.04 cputime=97.049 memavail=7356504 print_time=774.701 buffer_time=2.287 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 99 Hz
Stats 597.0: gcodein=0  mcu: mcu_awake=0.027 mcu_task_avg=0.000016 mcu_task_stddev=0.000018 bytes_write=1053923 bytes_read=187110 bytes_retransmit=9 bytes_invalid=0 send_seq=19366 receive_seq=19366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=2678 freq=119993175 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=21773 bytes_read=2769981 bytes_retransmit=9 bytes_invalid=0 send_seq=3118 receive_seq=3118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000562 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.04 cputime=97.476 memavail=7355104 print_time=775.701 buffer_time=2.287 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 100 Hz
Stats 598.0: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1059592 bytes_read=187871 bytes_retransmit=9 bytes_invalid=0 send_seq=19466 receive_seq=19466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=2775 freq=119993209 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=21849 bytes_read=2789208 bytes_retransmit=9 bytes_invalid=0 send_seq=3129 receive_seq=3129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000544 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.04 cputime=97.712 memavail=7353488 print_time=776.699 buffer_time=2.285 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 101 Hz
Stats 599.0: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1065318 bytes_read=188636 bytes_retransmit=9 bytes_invalid=0 send_seq=19567 receive_seq=19567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2889 freq=119993197 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=21925 bytes_read=2808435 bytes_retransmit=9 bytes_invalid=0 send_seq=3140 receive_seq=3140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000504 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=1.04 cputime=97.941 memavail=7351360 print_time=777.696 buffer_time=2.282 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 102 Hz
Stats 600.0: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1071101 bytes_read=189406 bytes_retransmit=9 bytes_invalid=0 send_seq=19669 receive_seq=19669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=3386 freq=119993189 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22001 bytes_read=2827723 bytes_retransmit=9 bytes_invalid=0 send_seq=3151 receive_seq=3151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000522 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.04 cputime=98.200 memavail=7351428 print_time=778.702 buffer_time=2.286 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 103 Hz
Stats 601.0: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1076460 bytes_read=190111 bytes_retransmit=9 bytes_invalid=0 send_seq=19761 receive_seq=19761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=4977 freq=119993185 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22077 bytes_read=2846950 bytes_retransmit=9 bytes_invalid=0 send_seq=3162 receive_seq=3162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000534 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.96 cputime=98.459 memavail=7352640 print_time=779.702 buffer_time=2.286 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 104 Hz
Stats 602.0: gcodein=0  mcu: mcu_awake=0.029 mcu_task_avg=0.000017 mcu_task_stddev=0.000018 bytes_write=1081922 bytes_read=190831 bytes_retransmit=9 bytes_invalid=0 send_seq=19853 receive_seq=19853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=6472 freq=119993212 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22153 bytes_read=2866255 bytes_retransmit=9 bytes_invalid=0 send_seq=3173 receive_seq=3173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000540 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.96 cputime=98.685 memavail=7353856 print_time=780.699 buffer_time=2.283 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 105 Hz
Stats 603.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1088992 bytes_read=191697 bytes_retransmit=9 bytes_invalid=0 send_seq=19971 receive_seq=19971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=6596 freq=119993213 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22229 bytes_read=2885482 bytes_retransmit=9 bytes_invalid=0 send_seq=3184 receive_seq=3184 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000507 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.96 cputime=98.992 memavail=7351352 print_time=781.697 buffer_time=2.281 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 106 Hz
Stats 604.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1096084 bytes_read=192537 bytes_retransmit=9 bytes_invalid=0 send_seq=20090 receive_seq=20090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=6775 freq=119993200 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22305 bytes_read=2904709 bytes_retransmit=9 bytes_invalid=0 send_seq=3195 receive_seq=3195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000512 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.96 cputime=99.327 memavail=7349000 print_time=782.702 buffer_time=2.285 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 107 Hz
Stats 605.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1103280 bytes_read=193407 bytes_retransmit=9 bytes_invalid=0 send_seq=20212 receive_seq=20212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=6899 freq=119993185 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22381 bytes_read=2923997 bytes_retransmit=9 bytes_invalid=0 send_seq=3206 receive_seq=3206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000531 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.96 cputime=99.558 memavail=7349140 print_time=783.702 buffer_time=2.284 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 108 Hz
Stats 606.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1110556 bytes_read=194277 bytes_retransmit=9 bytes_invalid=0 send_seq=20334 receive_seq=20334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=7037 freq=119993177 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22450 bytes_read=2943200 bytes_retransmit=9 bytes_invalid=0 send_seq=3216 receive_seq=3216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000550 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.88 cputime=99.796 memavail=7349956 print_time=784.702 buffer_time=2.284 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Testing frequency 109 Hz
Stats 607.0: gcodein=0  mcu: mcu_awake=0.030 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1117849 bytes_read=195132 bytes_retransmit=9 bytes_invalid=0 send_seq=20456 receive_seq=20456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=7147 freq=119993173 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22526 bytes_read=2962505 bytes_retransmit=9 bytes_invalid=0 send_seq=3227 receive_seq=3227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000556 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.88 cputime=100.009 memavail=7348332 print_time=785.698 buffer_time=2.279 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 110 Hz
Stats 608.0: gcodein=0  mcu: mcu_awake=0.037 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1125262 bytes_read=196028 bytes_retransmit=9 bytes_invalid=0 send_seq=20580 receive_seq=20580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=7309 freq=119993166 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22602 bytes_read=2981732 bytes_retransmit=9 bytes_invalid=0 send_seq=3238 receive_seq=3238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000556 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.88 cputime=100.245 memavail=7346652 print_time=786.703 buffer_time=2.284 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 111 Hz
Stats 609.0: gcodein=0  mcu: mcu_awake=0.037 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1132689 bytes_read=196908 bytes_retransmit=9 bytes_invalid=0 send_seq=20704 receive_seq=20704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=7345 freq=119993162 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22678 bytes_read=3000959 bytes_retransmit=9 bytes_invalid=0 send_seq=3249 receive_seq=3249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000558 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.88 cputime=100.522 memavail=7346448 print_time=787.701 buffer_time=2.281 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 112 Hz
Stats 610.0: gcodein=0  mcu: mcu_awake=0.037 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1140248 bytes_read=197788 bytes_retransmit=9 bytes_invalid=0 send_seq=20831 receive_seq=20831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=6361 freq=119993155 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22754 bytes_read=3020247 bytes_retransmit=9 bytes_invalid=0 send_seq=3260 receive_seq=3260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000557 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.88 cputime=100.862 memavail=7347736 print_time=788.703 buffer_time=2.283 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 113 Hz
Stats 611.0: gcodein=0  mcu: mcu_awake=0.037 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1148842 bytes_read=198803 bytes_retransmit=9 bytes_invalid=0 send_seq=20983 receive_seq=20983 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=23 upcoming_bytes=4484 freq=119993147 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22830 bytes_read=3039718 bytes_retransmit=9 bytes_invalid=0 send_seq=3271 receive_seq=3271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000563 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.81 cputime=101.189 memavail=7345104 print_time=789.703 buffer_time=2.275 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 114 Hz
Stats 612.0: gcodein=0  mcu: mcu_awake=0.037 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1155568 bytes_read=199650 bytes_retransmit=9 bytes_invalid=0 send_seq=21102 receive_seq=21102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=4345 freq=119993139 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22906 bytes_read=3059023 bytes_retransmit=9 bytes_invalid=0 send_seq=3282 receive_seq=3282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999861 adj=12000567 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.81 cputime=101.425 memavail=7345028 print_time=790.703 buffer_time=2.269 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 115 Hz
Stats 613.0: gcodein=0  mcu: mcu_awake=0.038 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1162025 bytes_read=200473 bytes_retransmit=9 bytes_invalid=0 send_seq=21215 receive_seq=21215 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=48 upcoming_bytes=4086 freq=119993135 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=22982 bytes_read=3078189 bytes_retransmit=9 bytes_invalid=0 send_seq=3293 receive_seq=3293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000569 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.81 cputime=101.674 memavail=7341612 print_time=791.703 buffer_time=2.269 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 116 Hz
Stats 614.0: gcodein=0  mcu: mcu_awake=0.038 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1168177 bytes_read=201253 bytes_retransmit=9 bytes_invalid=0 send_seq=21319 receive_seq=21319 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=25 upcoming_bytes=4472 freq=119993127 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=23058 bytes_read=3097477 bytes_retransmit=9 bytes_invalid=0 send_seq=3304 receive_seq=3304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000629 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.81 cputime=101.930 memavail=7341308 print_time=792.701 buffer_time=2.266 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Testing frequency 117 Hz
Stats 615.0: gcodein=0  mcu: mcu_awake=0.038 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1174743 bytes_read=202088 bytes_retransmit=9 bytes_invalid=0 send_seq=21434 receive_seq=21434 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=42 upcoming_bytes=4621 freq=119993122 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=23134 bytes_read=3116765 bytes_retransmit=9 bytes_invalid=0 send_seq=3315 receive_seq=3315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000617 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.81 cputime=102.181 memavail=7342288 print_time=793.699 buffer_time=2.261 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Testing frequency 118 Hz
Stats 616.0: gcodein=0  mcu: mcu_awake=0.038 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1181500 bytes_read=202933 bytes_retransmit=9 bytes_invalid=0 send_seq=21554 receive_seq=21554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=4966 freq=119993178 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=23210 bytes_read=3136114 bytes_retransmit=9 bytes_invalid=0 send_seq=3326 receive_seq=3326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000605 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.07 cputime=102.444 memavail=7340668 print_time=794.704 buffer_time=2.260 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 119 Hz
Stats 617.0: gcodein=0  mcu: mcu_awake=0.038 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1187882 bytes_read=203743 bytes_retransmit=9 bytes_invalid=0 send_seq=21664 receive_seq=21664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=6582 freq=119993176 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=23279 bytes_read=3155334 bytes_retransmit=9 bytes_invalid=0 send_seq=3336 receive_seq=3336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000525 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.07 cputime=102.741 memavail=7341280 print_time=795.704 buffer_time=2.260 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 120 Hz
Stats 618.0: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1194012 bytes_read=204534 bytes_retransmit=9 bytes_invalid=0 send_seq=21767 receive_seq=21767 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=31 upcoming_bytes=8518 freq=119993176 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=23355 bytes_read=3174622 bytes_retransmit=9 bytes_invalid=0 send_seq=3347 receive_seq=3347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000550 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.07 cputime=103.053 memavail=7341720 print_time=796.704 buffer_time=2.259 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 121 Hz
Stats 619.0: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1202186 bytes_read=205464 bytes_retransmit=9 bytes_invalid=0 send_seq=21904 receive_seq=21904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=5926 freq=119993170 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=23431 bytes_read=3193849 bytes_retransmit=9 bytes_invalid=0 send_seq=3358 receive_seq=3358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000544 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=1.07 cputime=103.377 memavail=7338892 print_time=797.700 buffer_time=2.254 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 122 Hz
Stats 620.0: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1210862 bytes_read=206439 bytes_retransmit=9 bytes_invalid=0 send_seq=22047 receive_seq=22047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2179 freq=119993165 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=23507 bytes_read=3213137 bytes_retransmit=9 bytes_invalid=0 send_seq=3369 receive_seq=3369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000547 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=1.07 cputime=103.617 memavail=7338432 print_time=798.702 buffer_time=2.255 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 123 Hz
Stats 621.0: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1217269 bytes_read=207229 bytes_retransmit=9 bytes_invalid=0 send_seq=22153 receive_seq=22153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=571 freq=119993157 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=23583 bytes_read=3232364 bytes_retransmit=9 bytes_invalid=0 send_seq=3380 receive_seq=3380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000546 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.98 cputime=103.835 memavail=7337032 print_time=799.704 buffer_time=2.256 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 124 Hz
Stats 622.0: gcodein=0  mcu: mcu_awake=0.033 mcu_task_avg=0.000017 mcu_task_stddev=0.000019 bytes_write=1221866 bytes_read=207864 bytes_retransmit=9 bytes_invalid=0 send_seq=22231 receive_seq=22231 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=656 freq=119993157 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=23659 bytes_read=3251669 bytes_retransmit=9 bytes_invalid=0 send_seq=3391 receive_seq=3391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000551 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.98 cputime=104.082 memavail=7337728 print_time=800.705 buffer_time=2.256 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 125 Hz
Stats 623.0: gcodein=0  mcu: mcu_awake=0.034 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1226494 bytes_read=208530 bytes_retransmit=9 bytes_invalid=0 send_seq=22309 receive_seq=22309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=707 freq=119993155 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=23735 bytes_read=3270835 bytes_retransmit=9 bytes_invalid=0 send_seq=3402 receive_seq=3402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000619 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.98 cputime=104.342 memavail=7336048 print_time=801.701 buffer_time=2.252 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 126 Hz
Stats 624.0: gcodein=0  mcu: mcu_awake=0.034 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1231229 bytes_read=209195 bytes_retransmit=9 bytes_invalid=0 send_seq=22390 receive_seq=22390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=792 freq=119993152 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=23817 bytes_read=3290139 bytes_retransmit=9 bytes_invalid=0 send_seq=3414 receive_seq=3414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000608 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.98 cputime=104.587 memavail=7336472 print_time=802.705 buffer_time=2.256 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 127 Hz
Stats 625.0: gcodein=0  mcu: mcu_awake=0.034 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1235950 bytes_read=209845 bytes_retransmit=9 bytes_invalid=0 send_seq=22471 receive_seq=22471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=853 freq=119993142 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=23893 bytes_read=3309427 bytes_retransmit=9 bytes_invalid=0 send_seq=3425 receive_seq=3425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000589 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.98 cputime=104.876 memavail=7336720 print_time=803.703 buffer_time=2.253 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 128 Hz
Stats 626.0: gcodein=0  mcu: mcu_awake=0.034 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1240702 bytes_read=210510 bytes_retransmit=9 bytes_invalid=0 send_seq=22552 receive_seq=22552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=928 freq=119993156 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=23969 bytes_read=3328654 bytes_retransmit=9 bytes_invalid=0 send_seq=3436 receive_seq=3436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000591 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.98 cputime=105.104 memavail=7333952 print_time=804.703 buffer_time=2.252 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 129 Hz
Stats 627.0: gcodein=0  mcu: mcu_awake=0.034 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1245481 bytes_read=211175 bytes_retransmit=9 bytes_invalid=0 send_seq=22633 receive_seq=22633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=996 freq=119993152 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24045 bytes_read=3347959 bytes_retransmit=9 bytes_invalid=0 send_seq=3447 receive_seq=3447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000560 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.98 cputime=105.315 memavail=7334428 print_time=805.703 buffer_time=2.251 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 130 Hz
Stats 628.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1250357 bytes_read=211846 bytes_retransmit=9 bytes_invalid=0 send_seq=22715 receive_seq=22715 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=1081 freq=119993148 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24114 bytes_read=3367162 bytes_retransmit=9 bytes_invalid=0 send_seq=3457 receive_seq=3457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000555 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.98 cputime=105.628 memavail=7335620 print_time=806.703 buffer_time=2.251 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 131 Hz
Stats 629.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1255214 bytes_read=212521 bytes_retransmit=9 bytes_invalid=0 send_seq=22798 receive_seq=22798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=1149 freq=119993140 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24190 bytes_read=3386389 bytes_retransmit=9 bytes_invalid=0 send_seq=3468 receive_seq=3468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000553 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.98 cputime=105.889 memavail=7332332 print_time=807.703 buffer_time=2.251 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Testing frequency 132 Hz
Stats 630.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1260159 bytes_read=213196 bytes_retransmit=9 bytes_invalid=0 send_seq=22881 receive_seq=22881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1217 freq=119993140 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24266 bytes_read=3405677 bytes_retransmit=9 bytes_invalid=0 send_seq=3479 receive_seq=3479 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000554 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.98 cputime=106.203 memavail=7332380 print_time=808.705 buffer_time=2.250 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Testing frequency 133 Hz
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 5.000000
Re-enabled [input_shaper]
Stats 631.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1264731 bytes_read=213826 bytes_retransmit=9 bytes_invalid=0 send_seq=22958 receive_seq=22958 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=119993135 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24342 bytes_read=3424965 bytes_retransmit=9 bytes_invalid=0 send_seq=3490 receive_seq=3490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000550 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.90 cputime=106.507 memavail=7331260 print_time=809.336 buffer_time=1.879 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 632.0: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000018 mcu_task_stddev=0.000020 bytes_write=1264890 bytes_read=214131 bytes_retransmit=9 bytes_invalid=0 send_seq=22967 receive_seq=22967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993127 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24411 bytes_read=3444185 bytes_retransmit=9 bytes_invalid=0 send_seq=3500 receive_seq=3500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000555 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.90 cputime=106.742 memavail=7331052 print_time=809.336 buffer_time=0.879 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 633.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000019 bytes_write=1265008 bytes_read=214452 bytes_retransmit=9 bytes_invalid=0 send_seq=22976 receive_seq=22976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993122 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24487 bytes_read=3463473 bytes_retransmit=9 bytes_invalid=0 send_seq=3511 receive_seq=3511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000562 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.90 cputime=106.982 memavail=7324020 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
ADXL345 finished 'adxl345' measurements
Stats 634.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000019 bytes_write=1265126 bytes_read=214742 bytes_retransmit=9 bytes_invalid=0 send_seq=22985 receive_seq=22985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993136 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24509 bytes_read=3463954 bytes_retransmit=9 bytes_invalid=0 send_seq=3514 receive_seq=3514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000567 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.90 cputime=107.057 memavail=7235208 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 635.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000019 bytes_write=1265244 bytes_read=215062 bytes_retransmit=9 bytes_invalid=0 send_seq=22994 receive_seq=22994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993137 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24515 bytes_read=3463970 bytes_retransmit=9 bytes_invalid=0 send_seq=3515 receive_seq=3515 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000560 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.90 cputime=107.136 memavail=7178112 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 636.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000019 bytes_write=1265362 bytes_read=215352 bytes_retransmit=9 bytes_invalid=0 send_seq=23003 receive_seq=23003 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993133 adxl: mcu_awake=0.416 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24521 bytes_read=3463986 bytes_retransmit=9 bytes_invalid=0 send_seq=3516 receive_seq=3516 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000556 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.99 cputime=107.198 memavail=7160820 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Calculating the best input shaper parameters for x axis
Stats 637.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000016 mcu_task_stddev=0.000019 bytes_write=1265486 bytes_read=215658 bytes_retransmit=9 bytes_invalid=0 send_seq=23013 receive_seq=23013 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993126 adxl: mcu_awake=0.168 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24527 bytes_read=3464018 bytes_retransmit=9 bytes_invalid=0 send_seq=3517 receive_seq=3517 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000557 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.99 cputime=107.516 memavail=7382248 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 638.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=1265604 bytes_read=215993 bytes_retransmit=9 bytes_invalid=0 send_seq=23022 receive_seq=23022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993121 adxl: mcu_awake=0.168 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24533 bytes_read=3464034 bytes_retransmit=9 bytes_invalid=0 send_seq=3518 receive_seq=3518 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000576 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.99 cputime=107.582 memavail=7377600 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Fitted shaper 'zv' frequency = 59.0 Hz (vibrations = 20.2%, smoothing ~= 0.051)
To avoid too much smoothing with 'zv', suggested max_accel <= 13600 mm/sec^2
Stats 639.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=1265722 bytes_read=216283 bytes_retransmit=9 bytes_invalid=0 send_seq=23031 receive_seq=23031 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993121 adxl: mcu_awake=0.168 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24539 bytes_read=3464050 bytes_retransmit=9 bytes_invalid=0 send_seq=3519 receive_seq=3519 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000572 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.99 cputime=107.683 memavail=7377692 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Fitted shaper 'mzv' frequency = 38.0 Hz (vibrations = 2.5%, smoothing ~= 0.141)
To avoid too much smoothing with 'mzv', suggested max_accel <= 4300 mm/sec^2
Stats 640.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=1265840 bytes_read=216573 bytes_retransmit=9 bytes_invalid=0 send_seq=23040 receive_seq=23040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993122 adxl: mcu_awake=0.168 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24545 bytes_read=3464066 bytes_retransmit=9 bytes_invalid=0 send_seq=3520 receive_seq=3520 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000582 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.99 cputime=107.770 memavail=7379312 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 641.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=1265958 bytes_read=216893 bytes_retransmit=9 bytes_invalid=0 send_seq=23049 receive_seq=23049 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993116 adxl: mcu_awake=0.168 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=24551 bytes_read=3464082 bytes_retransmit=9 bytes_invalid=0 send_seq=3521 receive_seq=3521 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000574 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.99 cputime=107.849 memavail=7376064 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Fitted shaper 'ei' frequency = 52.2 Hz (vibrations = 2.5%, smoothing ~= 0.118)
To avoid too much smoothing with 'ei', suggested max_accel <= 5100 mm/sec^2
Stats 642.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=1266076 bytes_read=217183 bytes_retransmit=9 bytes_invalid=0 send_seq=23058 receive_seq=23058 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993112 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=24557 bytes_read=3464109 bytes_retransmit=9 bytes_invalid=0 send_seq=3522 receive_seq=3522 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000570 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.99 cputime=107.968 memavail=7377440 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Fitted shaper '2hump_ei' frequency = 54.2 Hz (vibrations = 0.0%, smoothing ~= 0.184)
To avoid too much smoothing with '2hump_ei', suggested max_accel <= 3300 mm/sec^2
Stats 643.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=1266194 bytes_read=217488 bytes_retransmit=9 bytes_invalid=0 send_seq=23067 receive_seq=23067 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993114 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=24563 bytes_read=3464125 bytes_retransmit=9 bytes_invalid=0 send_seq=3523 receive_seq=3523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000570 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.99 cputime=108.066 memavail=7378656 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 644.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=1266312 bytes_read=217808 bytes_retransmit=9 bytes_invalid=0 send_seq=23076 receive_seq=23076 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993114 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=24569 bytes_read=3464141 bytes_retransmit=9 bytes_invalid=0 send_seq=3524 receive_seq=3524 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000563 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.99 cputime=108.171 memavail=7375820 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Fitted shaper '3hump_ei' frequency = 57.2 Hz (vibrations = 0.0%, smoothing ~= 0.250)
To avoid too much smoothing with '3hump_ei', suggested max_accel <= 2300 mm/sec^2
Recommended shaper_type_x = 2hump_ei, shaper_freq_x = 54.2 Hz
shaper_type_x:2hump_ei shaper_freq_x:54.200 damping_ratio_x:0.100000
shaper_type_y:mzv shaper_freq_y:26.400 damping_ratio_y:0.100000
save_config: set [input_shaper] shaper_type_x = 2hump_ei
save_config: set [input_shaper] shaper_freq_x = 54.2
Shaper calibration data written to /tmp/calibration_data_x_20231118_204409.csv file
The SAVE_CONFIG command will update the printer config file
with these parameters and restart the printer.
Stats 645.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=1266430 bytes_read=218098 bytes_retransmit=9 bytes_invalid=0 send_seq=23085 receive_seq=23085 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993111 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=24575 bytes_read=3464157 bytes_retransmit=9 bytes_invalid=0 send_seq=3525 receive_seq=3525 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000561 heater_bed: target=0 temp=27.8 pwm=0.000  sysload=0.99 cputime=108.259 memavail=7378076 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 646.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=1266548 bytes_read=218388 bytes_retransmit=9 bytes_invalid=0 send_seq=23094 receive_seq=23094 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993108 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=24581 bytes_read=3464173 bytes_retransmit=9 bytes_invalid=0 send_seq=3526 receive_seq=3526 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000556 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.91 cputime=108.316 memavail=7378580 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 647.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=1266666 bytes_read=218699 bytes_retransmit=9 bytes_invalid=0 send_seq=23103 receive_seq=23103 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993104 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=24587 bytes_read=3464200 bytes_retransmit=9 bytes_invalid=0 send_seq=3527 receive_seq=3527 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000553 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.91 cputime=108.390 memavail=7376540 print_time=809.336 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
SAVE_CONFIG to '/home/pi/printer_data/config/printer.cfg' (backup in '/home/pi/printer_data/config/printer-20231118_204633.cfg')
Stats 648.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=1266737 bytes_read=218864 bytes_retransmit=9 bytes_invalid=0 send_seq=23107 receive_seq=23107 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993104 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=24593 bytes_read=3464216 bytes_retransmit=9 bytes_invalid=0 send_seq=3528 receive_seq=3528 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000553 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.91 cputime=108.545 memavail=7385180 print_time=824.713 buffer_time=0.240 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
webhooks client 547755010704: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:46:35 2023 (1700369195.4 649.5)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[mcu adxl]
serial = /dev/serial/by-id/usb-Klipper_rp2040_E6614864D325A121-if00

[adxl345]
cs_pin = adxl:gpio1
spi_bus = spi0a
axes_map = x,z,y

[resonance_tester]
accel_chip = adxl345
probe_points = 
	150,150, 20

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547746798032: New connection
webhooks client 547746798032: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
mcu 'mcu': got {'oid': 17, 'next_clock': 524152192, 'value': 31113, '#name': 'analog_in_state', '#sent_time': 650.851184482, '#receive_time': 650.861023204}
mcu 'mcu': got {'oid': 25, 'next_clock': 533752192, 'value': 31167, '#name': 'analog_in_state', '#sent_time': 650.902071278, '#receive_time': 650.939944982}
Loaded MCU 'mcu' 105 commands (v0.11.0-105-g1e7057e9 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0=P0.28,P0.27 BUS_PINS_i2c1=P0.1,P0.0 BUS_PINS_i2c1a=P0.20,P0.19 BUS_PINS_i2c2=P0.11,P0.10 BUS_PINS_ssp0=P0.17,P0.18,P0.15 BUS_PINS_ssp1=P0.8,P0.9,P0.7 CLOCK_FREQ=120000000 MCU=lpc1769 PWM_MAX=255 RESERVE_PINS_USB=P0.30,P0.29,P2.9 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'adxl': Starting serial connect
mcu 'mcu': got {'oid': 17, 'next_clock': 560152192, 'value': 31108, '#name': 'analog_in_state', '#sent_time': 651.145136778, '#receive_time': 651.160005556}
mcu 'mcu': got {'oid': 25, 'next_clock': 569752192, 'value': 31172, '#name': 'analog_in_state', '#sent_time': 651.145136778, '#receive_time': 651.239987426}
mcu 'mcu': got {'oid': 17, 'next_clock': 596152192, 'value': 31112, '#name': 'analog_in_state', '#sent_time': 651.145136778, '#receive_time': 651.46281263}
mcu 'mcu': got {'oid': 25, 'next_clock': 605752192, 'value': 31168, '#name': 'analog_in_state', '#sent_time': 651.145136778, '#receive_time': 651.539972796}
mcu 'mcu': got {'oid': 17, 'next_clock': 632152192, 'value': 31110, '#name': 'analog_in_state', '#sent_time': 651.145136778, '#receive_time': 651.760009889}
Loaded MCU 'adxl' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'adxl' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Configured MCU 'mcu' (1024 moves)
Configured MCU 'adxl' (1024 moves)
mcu 'adxl': got {'oid': 1, 'clock': 3639053754, 'query_ticks': 119, 'next_sequence': 40205, 'buffered': 0, 'fifo': 0, 'limit_count': 0, '#name': 'adxl345_status', '#sent_time': 651.809327796, '#receive_time': 651.809558926}
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (0.0, 10.0)     | (27.0, 5.0)
  1   | (35.5, 10.0)    | (62.5, 5.0)
  2   | (71.0, 10.0)    | (98.0, 5.0)
  3   | (106.5, 10.0)   | (133.5, 5.0)
  4   | (142.0, 10.0)   | (169.0, 5.0)
  5   | (177.5, 10.0)   | (204.5, 5.0)
  6   | (213.0, 10.0)   | (240.0, 5.0)
  7   | (213.0, 58.8)   | (240.0, 53.8)
  8   | (177.5, 58.8)   | (204.5, 53.8)
  9   | (142.0, 58.8)   | (169.0, 53.8)
  10  | (106.5, 58.8)   | (133.5, 53.8)
  11  | (71.0, 58.8)    | (98.0, 53.8)
  12  | (35.5, 58.8)    | (62.5, 53.8)
  13  | (0.0, 58.8)     | (27.0, 53.8)
  14  | (0.0, 107.5)    | (27.0, 102.5)
  15  | (35.5, 107.5)   | (62.5, 102.5)
  16  | (71.0, 107.5)   | (98.0, 102.5)
  17  | (106.5, 107.5)  | (133.5, 102.5)
  18  | (142.0, 107.5)  | (169.0, 102.5)
  19  | (177.5, 107.5)  | (204.5, 102.5)
  20  | (213.0, 107.5)  | (240.0, 102.5)
  21  | (213.0, 156.2)  | (240.0, 151.2)
  22  | (177.5, 156.2)  | (204.5, 151.2)
  23  | (142.0, 156.2)  | (169.0, 151.2)
  24  | (106.5, 156.2)  | (133.5, 151.2)
  25  | (71.0, 156.2)   | (98.0, 151.2)
  26  | (35.5, 156.2)   | (62.5, 151.2)
  27  | (0.0, 156.2)    | (27.0, 151.2)
  28  | (0.0, 205.0)    | (27.0, 200.0)
  29  | (35.5, 205.0)   | (62.5, 200.0)
  30  | (71.0, 205.0)   | (98.0, 200.0)
  31  | (106.5, 205.0)  | (133.5, 200.0)
  32  | (142.0, 205.0)  | (169.0, 200.0)
  33  | (177.5, 205.0)  | (204.5, 200.0)
  34  | (213.0, 205.0)  | (240.0, 200.0)
Starting heater checks for extruder
Starting heater checks for heater_bed
webhooks: registering remote method 'shutdown_machine' for connection id: 547746798032
webhooks: registering remote method 'reboot_machine' for connection id: 547746798032
webhooks: registering remote method 'pause_job_queue' for connection id: 547746798032
webhooks: registering remote method 'start_job_queue' for connection id: 547746798032
webhooks: registering remote method 'publish_mqtt_topic' for connection id: 547746798032
webhooks: registering remote method 'set_device_power' for connection id: 547746798032
webhooks: registering remote method 'notify' for connection id: 547746798032
webhooks: registering remote method 'timelapse_newframe' for connection id: 547746798032
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 547746798032
webhooks: registering remote method 'timelapse_render' for connection id: 547746798032
shaper_type_x:2hump_ei shaper_freq_x:54.200 damping_ratio_x:0.100000
shaper_type_y:mzv shaper_freq_y:26.400 damping_ratio_y:0.100000
ADXL345 starting 'adxl345' measurements
Stats 656.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=2662 bytes_read=6447 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119991637 adxl: mcu_awake=0.049 mcu_task_avg=0.000021 mcu_task_stddev=0.000010 bytes_write=944 bytes_read=16420 bytes_retransmit=9 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999933 adj=12004282 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.93 cputime=110.205 memavail=7388196 print_time=833.267 buffer_time=0.622 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
accelerometer values (x, y, z): 0.000000, 0.000000, -9548.656652
Stats 657.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=2668 bytes_read=6553 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119995500 adxl: mcu_awake=0.049 mcu_task_avg=0.000021 mcu_task_stddev=0.000010 bytes_write=1020 bytes_read=35326 bytes_retransmit=9 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999962 adj=12002722 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.93 cputime=110.382 memavail=7394444 print_time=835.604 buffer_time=1.958 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 658.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=2674 bytes_read=6689 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993937 adxl: mcu_awake=0.049 mcu_task_avg=0.000021 mcu_task_stddev=0.000010 bytes_write=1096 bytes_read=54232 bytes_retransmit=9 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999885 adj=12000474 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.93 cputime=110.553 memavail=7398464 print_time=835.604 buffer_time=0.957 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 659.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=2680 bytes_read=6810 bytes_retransmit=9 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993127 adxl: mcu_awake=0.049 mcu_task_avg=0.000021 mcu_task_stddev=0.000010 bytes_write=1181 bytes_read=73371 bytes_retransmit=9 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999856 adj=12000702 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.93 cputime=110.771 memavail=7394604 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
ADXL345 finished 'adxl345' measurements
Axes noise for xy-axis accelerometer: 144.175313 (x), 132.139870 (y), 130.610742 (z)
Stats 660.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=2686 bytes_read=6916 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992666 adxl: mcu_awake=0.049 mcu_task_avg=0.000021 mcu_task_stddev=0.000010 bytes_write=1187 bytes_read=73387 bytes_retransmit=9 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999837 adj=12000847 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.93 cputime=110.804 memavail=7395408 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 661.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=2692 bytes_read=7037 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992450 adxl: mcu_awake=0.049 mcu_task_avg=0.000021 mcu_task_stddev=0.000010 bytes_write=1193 bytes_read=73403 bytes_retransmit=9 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999844 adj=12000926 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.86 cputime=110.838 memavail=7392920 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 662.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=2698 bytes_read=7158 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992299 adxl: mcu_awake=0.257 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1199 bytes_read=73435 bytes_retransmit=9 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999844 adj=12000933 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.86 cputime=110.867 memavail=7400300 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 663.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2704 bytes_read=7278 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992305 adxl: mcu_awake=0.257 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1205 bytes_read=73451 bytes_retransmit=9 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999839 adj=12000908 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.86 cputime=110.887 memavail=7401252 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 664.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2710 bytes_read=7414 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992221 adxl: mcu_awake=0.257 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1211 bytes_read=73467 bytes_retransmit=9 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999836 adj=12000810 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.86 cputime=110.910 memavail=7399236 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 665.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2716 bytes_read=7520 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992525 adxl: mcu_awake=0.257 mcu_task_avg=0.000024 mcu_task_stddev=0.000009 bytes_write=1217 bytes_read=73483 bytes_retransmit=9 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999843 adj=12000777 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.86 cputime=110.938 memavail=7399772 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 666.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2722 bytes_read=7626 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992514 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1223 bytes_read=73510 bytes_retransmit=9 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999845 adj=12000634 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.79 cputime=110.959 memavail=7398428 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 667.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2728 bytes_read=7762 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992491 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1229 bytes_read=73526 bytes_retransmit=9 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999849 adj=12000636 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.79 cputime=110.981 memavail=7397732 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 668.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2734 bytes_read=7882 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992479 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1235 bytes_read=73542 bytes_retransmit=9 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999850 adj=12000655 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.79 cputime=111.011 memavail=7397060 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 669.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2740 bytes_read=7988 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992490 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1241 bytes_read=73558 bytes_retransmit=9 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999853 adj=12000652 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.79 cputime=111.034 memavail=7398772 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 670.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2746 bytes_read=8124 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992500 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1247 bytes_read=73574 bytes_retransmit=9 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999885 adj=12000652 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.79 cputime=111.058 memavail=7398296 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 671.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2752 bytes_read=8230 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992513 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1253 bytes_read=73601 bytes_retransmit=9 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999880 adj=12000799 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.72 cputime=111.078 memavail=7399740 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 672.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2758 bytes_read=8336 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992526 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1259 bytes_read=73617 bytes_retransmit=9 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000725 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.72 cputime=111.103 memavail=7398392 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 673.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2764 bytes_read=8486 bytes_retransmit=9 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992559 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1265 bytes_read=73633 bytes_retransmit=9 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000668 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.72 cputime=111.130 memavail=7400428 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 674.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2770 bytes_read=8592 bytes_retransmit=9 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992623 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1271 bytes_read=73649 bytes_retransmit=9 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000628 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.72 cputime=111.155 memavail=7398836 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 675.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2776 bytes_read=8698 bytes_retransmit=9 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992634 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1277 bytes_read=73665 bytes_retransmit=9 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000570 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.72 cputime=111.175 memavail=7399948 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 676.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2782 bytes_read=8834 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992641 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1283 bytes_read=73692 bytes_retransmit=9 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000554 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.67 cputime=111.196 memavail=7398352 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 677.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2788 bytes_read=8940 bytes_retransmit=9 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992663 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1289 bytes_read=73708 bytes_retransmit=9 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000552 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.67 cputime=111.224 memavail=7397680 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 678.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2794 bytes_read=9060 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992702 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1295 bytes_read=73724 bytes_retransmit=9 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000552 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.67 cputime=111.249 memavail=7397208 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 679.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2800 bytes_read=9196 bytes_retransmit=9 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992711 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1301 bytes_read=73740 bytes_retransmit=9 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999885 adj=12000535 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.67 cputime=111.277 memavail=7399200 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 680.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2806 bytes_read=9302 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992726 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1307 bytes_read=73756 bytes_retransmit=9 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999882 adj=12000671 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.67 cputime=111.309 memavail=7398080 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 681.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2812 bytes_read=9408 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992738 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1313 bytes_read=73783 bytes_retransmit=9 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999880 adj=12000624 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.61 cputime=111.336 memavail=7396936 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 682.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2818 bytes_read=9540 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992777 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1319 bytes_read=73799 bytes_retransmit=9 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999879 adj=12000602 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.61 cputime=111.364 memavail=7396844 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 683.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2824 bytes_read=9653 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992798 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1325 bytes_read=73815 bytes_retransmit=9 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999879 adj=12000566 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.61 cputime=111.384 memavail=7396840 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 684.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2830 bytes_read=9753 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992994 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1331 bytes_read=73831 bytes_retransmit=9 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999923 adj=12000560 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.61 cputime=111.423 memavail=7394192 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 685.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=2836 bytes_read=9889 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992981 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1337 bytes_read=73847 bytes_retransmit=9 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999916 adj=12000755 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.61 cputime=111.447 memavail=7391044 print_time=835.604 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 686.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4449 bytes_read=11215 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992951 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1343 bytes_read=73874 bytes_retransmit=9 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999908 adj=12000677 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.56 cputime=111.582 memavail=7391648 print_time=862.889 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 687.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=4840 bytes_read=11704 bytes_retransmit=9 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=119992931 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1355 bytes_read=73906 bytes_retransmit=9 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999896 adj=12000620 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.56 cputime=111.660 memavail=7398088 print_time=863.839 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 688.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=5942 bytes_read=12903 bytes_retransmit=9 bytes_invalid=0 send_seq=419 receive_seq=419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119992916 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1361 bytes_read=73922 bytes_retransmit=9 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999892 adj=12000537 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.56 cputime=111.794 memavail=7399760 print_time=864.859 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 689.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=6975 bytes_read=13581 bytes_retransmit=9 bytes_invalid=0 send_seq=461 receive_seq=461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119992913 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1367 bytes_read=73938 bytes_retransmit=9 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999888 adj=12000528 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.56 cputime=111.875 memavail=7398136 print_time=866.437 buffer_time=0.762 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 690.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7101 bytes_read=13871 bytes_retransmit=9 bytes_invalid=0 send_seq=470 receive_seq=470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=119992912 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1373 bytes_read=73954 bytes_retransmit=9 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999887 adj=12000527 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.56 cputime=111.914 memavail=7400352 print_time=866.437 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 691.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7400 bytes_read=14367 bytes_retransmit=9 bytes_invalid=0 send_seq=491 receive_seq=491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=119992915 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1379 bytes_read=73981 bytes_retransmit=9 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999894 adj=12000528 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.60 cputime=111.970 memavail=7401256 print_time=868.380 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 692.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7930 bytes_read=14788 bytes_retransmit=9 bytes_invalid=0 send_seq=515 receive_seq=515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993055 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1385 bytes_read=73997 bytes_retransmit=9 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999890 adj=12000610 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.60 cputime=112.031 memavail=7398764 print_time=868.880 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 693.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=8558 bytes_read=15368 bytes_retransmit=9 bytes_invalid=0 send_seq=548 receive_seq=548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993031 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1391 bytes_read=74013 bytes_retransmit=9 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999888 adj=12000446 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.60 cputime=112.103 memavail=7399896 print_time=869.880 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 694.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=9181 bytes_read=15928 bytes_retransmit=9 bytes_invalid=0 send_seq=580 receive_seq=580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993024 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1397 bytes_read=74029 bytes_retransmit=9 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999886 adj=12000492 heater_bed: target=0 temp=27.7 pwm=0.000  sysload=0.60 cputime=112.189 memavail=7399272 print_time=870.880 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 695.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=10070 bytes_read=16446 bytes_retransmit=9 bytes_invalid=0 send_seq=611 receive_seq=611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993034 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1403 bytes_read=74045 bytes_retransmit=9 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999883 adj=12000497 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.60 cputime=112.260 memavail=7400076 print_time=871.850 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 696.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=10566 bytes_read=17020 bytes_retransmit=9 bytes_invalid=0 send_seq=639 receive_seq=639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993028 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1409 bytes_read=74072 bytes_retransmit=9 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999880 adj=12000484 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.55 cputime=112.333 memavail=7401448 print_time=872.398 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 697.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=11132 bytes_read=17518 bytes_retransmit=9 bytes_invalid=0 send_seq=663 receive_seq=663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993178 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1415 bytes_read=74088 bytes_retransmit=9 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999878 adj=12000485 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.55 cputime=112.398 memavail=7399312 print_time=873.837 buffer_time=0.157 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 698.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=11250 bytes_read=17823 bytes_retransmit=9 bytes_invalid=0 send_seq=672 receive_seq=672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993156 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1421 bytes_read=74104 bytes_retransmit=9 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000342 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.55 cputime=112.442 memavail=7400192 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 699.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=11368 bytes_read=18128 bytes_retransmit=9 bytes_invalid=0 send_seq=681 receive_seq=681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993137 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1427 bytes_read=74120 bytes_retransmit=9 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000389 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.55 cputime=112.489 memavail=7399072 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 700.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=11486 bytes_read=18433 bytes_retransmit=9 bytes_invalid=0 send_seq=690 receive_seq=690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993123 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1433 bytes_read=74136 bytes_retransmit=9 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999886 adj=12000435 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.55 cputime=112.533 memavail=7397728 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 701.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=11604 bytes_read=18723 bytes_retransmit=9 bytes_invalid=0 send_seq=699 receive_seq=699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993165 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1439 bytes_read=74162 bytes_retransmit=9 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999883 adj=12000594 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.67 cputime=112.580 memavail=7398728 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 702.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=11722 bytes_read=19028 bytes_retransmit=9 bytes_invalid=0 send_seq=708 receive_seq=708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993144 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1445 bytes_read=74177 bytes_retransmit=9 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999882 adj=12000522 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.67 cputime=112.620 memavail=7400860 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 703.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=11840 bytes_read=19348 bytes_retransmit=9 bytes_invalid=0 send_seq=717 receive_seq=717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993128 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1451 bytes_read=74192 bytes_retransmit=9 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999880 adj=12000540 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.67 cputime=112.668 memavail=7399516 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 704.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=11958 bytes_read=19638 bytes_retransmit=9 bytes_invalid=0 send_seq=726 receive_seq=726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993128 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1457 bytes_read=74207 bytes_retransmit=9 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999878 adj=12000546 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.67 cputime=112.719 memavail=7401608 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 705.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12076 bytes_read=19943 bytes_retransmit=9 bytes_invalid=0 send_seq=735 receive_seq=735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993120 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1463 bytes_read=74222 bytes_retransmit=9 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000530 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.67 cputime=112.776 memavail=7399288 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 706.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12194 bytes_read=20248 bytes_retransmit=9 bytes_invalid=0 send_seq=744 receive_seq=744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993107 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1469 bytes_read=74248 bytes_retransmit=9 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000525 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.61 cputime=112.824 memavail=7398600 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 707.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12318 bytes_read=20538 bytes_retransmit=9 bytes_invalid=0 send_seq=754 receive_seq=753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993096 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1475 bytes_read=74263 bytes_retransmit=9 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000531 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.61 cputime=112.870 memavail=7396108 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 708.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12436 bytes_read=20874 bytes_retransmit=9 bytes_invalid=0 send_seq=763 receive_seq=763 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993072 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1481 bytes_read=74278 bytes_retransmit=9 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000546 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.61 cputime=112.927 memavail=7394180 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 709.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12554 bytes_read=21179 bytes_retransmit=9 bytes_invalid=0 send_seq=772 receive_seq=772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993065 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1487 bytes_read=74293 bytes_retransmit=9 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999884 adj=12000542 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.61 cputime=112.973 memavail=7394432 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 710.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12672 bytes_read=21469 bytes_retransmit=9 bytes_invalid=0 send_seq=781 receive_seq=781 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993380 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1493 bytes_read=74308 bytes_retransmit=9 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999882 adj=12000709 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.61 cputime=113.023 memavail=7396188 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 711.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12790 bytes_read=21774 bytes_retransmit=9 bytes_invalid=0 send_seq=790 receive_seq=790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993337 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1499 bytes_read=74334 bytes_retransmit=9 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999879 adj=12000293 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.64 cputime=113.075 memavail=7399396 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 712.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=12908 bytes_read=22079 bytes_retransmit=9 bytes_invalid=0 send_seq=799 receive_seq=799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993311 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1505 bytes_read=74349 bytes_retransmit=9 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000331 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.64 cputime=113.112 memavail=7399692 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 713.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13026 bytes_read=22384 bytes_retransmit=9 bytes_invalid=0 send_seq=808 receive_seq=808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993303 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1511 bytes_read=74364 bytes_retransmit=9 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999880 adj=12000386 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.64 cputime=113.166 memavail=7397856 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 714.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13144 bytes_read=22689 bytes_retransmit=9 bytes_invalid=0 send_seq=817 receive_seq=817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993276 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1517 bytes_read=74379 bytes_retransmit=9 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999878 adj=12000478 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.64 cputime=113.212 memavail=7398824 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 715.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13262 bytes_read=22994 bytes_retransmit=9 bytes_invalid=0 send_seq=826 receive_seq=826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993262 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1523 bytes_read=74394 bytes_retransmit=9 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999876 adj=12000505 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.64 cputime=113.253 memavail=7396724 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 716.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13380 bytes_read=23284 bytes_retransmit=9 bytes_invalid=0 send_seq=835 receive_seq=835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993240 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1529 bytes_read=74420 bytes_retransmit=9 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999875 adj=12000510 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.59 cputime=113.296 memavail=7397424 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 717.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13498 bytes_read=23589 bytes_retransmit=9 bytes_invalid=0 send_seq=844 receive_seq=844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993225 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1535 bytes_read=74435 bytes_retransmit=9 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000529 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.59 cputime=113.345 memavail=7396500 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 718.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13616 bytes_read=23902 bytes_retransmit=9 bytes_invalid=0 send_seq=853 receive_seq=853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993222 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1541 bytes_read=74450 bytes_retransmit=9 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999879 adj=12000536 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.59 cputime=113.394 memavail=7395140 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 719.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13734 bytes_read=24185 bytes_retransmit=9 bytes_invalid=0 send_seq=862 receive_seq=862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993204 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1547 bytes_read=74465 bytes_retransmit=9 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999877 adj=12000606 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.59 cputime=113.432 memavail=7396768 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 720.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13852 bytes_read=24486 bytes_retransmit=9 bytes_invalid=0 send_seq=871 receive_seq=871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993205 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1553 bytes_read=74480 bytes_retransmit=9 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999875 adj=12000592 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.59 cputime=113.478 memavail=7398196 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 721.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=13970 bytes_read=24791 bytes_retransmit=9 bytes_invalid=0 send_seq=880 receive_seq=880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993192 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1559 bytes_read=74506 bytes_retransmit=9 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000561 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.63 cputime=113.526 memavail=7396636 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 722.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14088 bytes_read=25081 bytes_retransmit=9 bytes_invalid=0 send_seq=889 receive_seq=889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993187 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1565 bytes_read=74521 bytes_retransmit=9 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000554 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.63 cputime=113.569 memavail=7395292 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 723.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14206 bytes_read=25401 bytes_retransmit=9 bytes_invalid=0 send_seq=898 receive_seq=898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993174 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1571 bytes_read=74536 bytes_retransmit=9 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000546 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.63 cputime=113.608 memavail=7396496 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 724.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14324 bytes_read=25706 bytes_retransmit=9 bytes_invalid=0 send_seq=907 receive_seq=907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993163 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1577 bytes_read=74552 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000549 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.63 cputime=113.653 memavail=7398500 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 725.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14442 bytes_read=25996 bytes_retransmit=9 bytes_invalid=0 send_seq=916 receive_seq=916 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993150 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1583 bytes_read=74568 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000550 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.63 cputime=113.696 memavail=7396824 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 726.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14560 bytes_read=26301 bytes_retransmit=9 bytes_invalid=0 send_seq=925 receive_seq=925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993140 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1589 bytes_read=74595 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000553 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.58 cputime=113.741 memavail=7398300 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 727.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14678 bytes_read=26606 bytes_retransmit=9 bytes_invalid=0 send_seq=934 receive_seq=934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993200 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1595 bytes_read=74611 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000551 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.58 cputime=113.791 memavail=7396452 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 728.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14796 bytes_read=26911 bytes_retransmit=9 bytes_invalid=0 send_seq=943 receive_seq=943 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993185 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1601 bytes_read=74627 bytes_retransmit=9 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999873 adj=12000559 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.58 cputime=113.826 memavail=7399156 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 729.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=14914 bytes_read=27216 bytes_retransmit=9 bytes_invalid=0 send_seq=952 receive_seq=952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993173 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1607 bytes_read=74643 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000560 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.58 cputime=113.872 memavail=7397784 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 730.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=15032 bytes_read=27521 bytes_retransmit=9 bytes_invalid=0 send_seq=961 receive_seq=961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993176 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1613 bytes_read=74659 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000559 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.58 cputime=113.917 memavail=7396640 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 731.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=15150 bytes_read=27811 bytes_retransmit=9 bytes_invalid=0 send_seq=970 receive_seq=970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993165 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1619 bytes_read=74686 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000542 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.53 cputime=113.957 memavail=7399000 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 732.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=15268 bytes_read=28116 bytes_retransmit=9 bytes_invalid=0 send_seq=979 receive_seq=979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993155 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1625 bytes_read=74702 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000550 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.53 cputime=113.993 memavail=7397208 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 733.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=15386 bytes_read=28436 bytes_retransmit=9 bytes_invalid=0 send_seq=988 receive_seq=988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993145 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1631 bytes_read=74718 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000554 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.53 cputime=114.032 memavail=7396508 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 734.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=15504 bytes_read=28726 bytes_retransmit=9 bytes_invalid=0 send_seq=997 receive_seq=997 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993138 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1637 bytes_read=74734 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000554 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.53 cputime=114.073 memavail=7399432 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 735.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=15622 bytes_read=29031 bytes_retransmit=9 bytes_invalid=0 send_seq=1006 receive_seq=1006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993133 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1643 bytes_read=74750 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000552 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.53 cputime=114.126 memavail=7400776 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 736.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=15740 bytes_read=29336 bytes_retransmit=9 bytes_invalid=0 send_seq=1015 receive_seq=1015 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993138 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1649 bytes_read=74777 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000553 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.73 cputime=114.182 memavail=7398272 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 737.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=15858 bytes_read=29626 bytes_retransmit=9 bytes_invalid=0 send_seq=1024 receive_seq=1024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993130 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1655 bytes_read=74793 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000607 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.73 cputime=114.218 memavail=7399960 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 738.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=15976 bytes_read=29946 bytes_retransmit=9 bytes_invalid=0 send_seq=1033 receive_seq=1033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993122 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1661 bytes_read=74809 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000594 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.73 cputime=114.269 memavail=7397652 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 739.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16094 bytes_read=30251 bytes_retransmit=9 bytes_invalid=0 send_seq=1042 receive_seq=1042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993125 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1667 bytes_read=74825 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000580 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.73 cputime=114.319 memavail=7398796 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 740.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16212 bytes_read=30541 bytes_retransmit=9 bytes_invalid=0 send_seq=1051 receive_seq=1051 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993119 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1673 bytes_read=74841 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999868 adj=12000560 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.73 cputime=114.375 memavail=7397452 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 741.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16330 bytes_read=30846 bytes_retransmit=9 bytes_invalid=0 send_seq=1060 receive_seq=1060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993111 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1679 bytes_read=74868 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000560 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.67 cputime=114.424 memavail=7397004 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 742.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16448 bytes_read=31151 bytes_retransmit=9 bytes_invalid=0 send_seq=1069 receive_seq=1069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993133 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1685 bytes_read=74884 bytes_retransmit=9 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000560 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.67 cputime=114.475 memavail=7395408 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 743.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16566 bytes_read=31456 bytes_retransmit=9 bytes_invalid=0 send_seq=1078 receive_seq=1078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993130 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1691 bytes_read=74900 bytes_retransmit=9 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000520 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.67 cputime=114.526 memavail=7396828 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 744.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16684 bytes_read=31761 bytes_retransmit=9 bytes_invalid=0 send_seq=1087 receive_seq=1087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993127 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1697 bytes_read=74916 bytes_retransmit=9 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000525 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.67 cputime=114.577 memavail=7395932 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 745.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16802 bytes_read=32066 bytes_retransmit=9 bytes_invalid=0 send_seq=1096 receive_seq=1096 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993191 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1703 bytes_read=74932 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000529 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.67 cputime=114.630 memavail=7394924 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 746.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=16920 bytes_read=32356 bytes_retransmit=9 bytes_invalid=0 send_seq=1105 receive_seq=1105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993175 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1709 bytes_read=74959 bytes_retransmit=9 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999871 adj=12000540 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.61 cputime=114.668 memavail=7397440 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 747.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17038 bytes_read=32661 bytes_retransmit=9 bytes_invalid=0 send_seq=1114 receive_seq=1114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993169 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1715 bytes_read=74975 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000550 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.61 cputime=114.717 memavail=7396516 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 748.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17156 bytes_read=32981 bytes_retransmit=9 bytes_invalid=0 send_seq=1123 receive_seq=1123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993159 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1727 bytes_read=75007 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999875 adj=12000546 heater_bed: target=0 temp=27.6 pwm=0.000  sysload=0.61 cputime=114.766 memavail=7397900 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 749.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17274 bytes_read=33271 bytes_retransmit=9 bytes_invalid=0 send_seq=1132 receive_seq=1132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993215 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1733 bytes_read=75023 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999874 adj=12000628 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.61 cputime=114.805 memavail=7399384 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 750.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17392 bytes_read=33576 bytes_retransmit=9 bytes_invalid=0 send_seq=1141 receive_seq=1141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993203 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1739 bytes_read=75039 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999872 adj=12000515 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.61 cputime=114.840 memavail=7397112 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 751.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17510 bytes_read=33881 bytes_retransmit=9 bytes_invalid=0 send_seq=1150 receive_seq=1150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993188 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1745 bytes_read=75066 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000519 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.57 cputime=114.878 memavail=7397112 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 752.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17628 bytes_read=34171 bytes_retransmit=9 bytes_invalid=0 send_seq=1159 receive_seq=1159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993174 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1751 bytes_read=75082 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000526 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.57 cputime=114.919 memavail=7397112 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 753.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17746 bytes_read=34491 bytes_retransmit=9 bytes_invalid=0 send_seq=1168 receive_seq=1168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993162 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1757 bytes_read=75098 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999883 adj=12000542 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.57 cputime=114.968 memavail=7396400 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 754.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17864 bytes_read=34789 bytes_retransmit=9 bytes_invalid=0 send_seq=1177 receive_seq=1177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993155 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1763 bytes_read=75114 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999881 adj=12000744 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.57 cputime=115.012 memavail=7396400 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 755.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=17982 bytes_read=35072 bytes_retransmit=9 bytes_invalid=0 send_seq=1186 receive_seq=1186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993143 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1769 bytes_read=75130 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999880 adj=12000689 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.57 cputime=115.063 memavail=7395028 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 756.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18100 bytes_read=35374 bytes_retransmit=9 bytes_invalid=0 send_seq=1195 receive_seq=1195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993135 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1775 bytes_read=75157 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999879 adj=12000659 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.52 cputime=115.104 memavail=7396696 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 757.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=18218 bytes_read=35679 bytes_retransmit=9 bytes_invalid=0 send_seq=1204 receive_seq=1204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993133 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=1781 bytes_read=75173 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999877 adj=12000624 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.52 cputime=115.150 memavail=7395784 print_time=873.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 836.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=28284 bytes_read=59677 bytes_retransmit=9 bytes_invalid=0 send_seq=1928 receive_seq=1928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=119993183 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2261 bytes_read=76629 bytes_retransmit=9 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000562 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.64 cputime=118.647 memavail=7396700 print_time=1014.150 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 837.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=28415 bytes_read=59987 bytes_retransmit=9 bytes_invalid=0 send_seq=1938 receive_seq=1938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=119993176 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2267 bytes_read=76645 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000545 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.64 cputime=118.690 memavail=7398528 print_time=1014.150 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 838.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=29091 bytes_read=60510 bytes_retransmit=9 bytes_invalid=0 send_seq=1971 receive_seq=1971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993167 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2273 bytes_read=76661 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999865 adj=12000552 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.64 cputime=118.767 memavail=7396260 print_time=1015.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
probe at 5.000,110.000 is z=1.861250
Stats 839.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=30115 bytes_read=61029 bytes_retransmit=9 bytes_invalid=0 send_seq=2002 receive_seq=2002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993159 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2279 bytes_read=76677 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999864 adj=12000561 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.64 cputime=118.821 memavail=7394196 print_time=1016.090 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 840.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=30784 bytes_read=61556 bytes_retransmit=9 bytes_invalid=0 send_seq=2033 receive_seq=2033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993152 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2285 bytes_read=76693 bytes_retransmit=9 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000561 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.64 cputime=118.888 memavail=7395456 print_time=1016.990 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
probe at 215.000,110.000 is z=1.482500
Calculating bed tilt with: [[5.000000000040643, 110.0000000000091, 1.8612500000001528], [214.9999999999136, 110.00000000000911, 1.4825000000002877]]
Coordinate descent initial error: 0.08393281249988009
Coordinate descent best_err: 7.773511412080246e-11  rounds: 203
Calculated bed tilt parameters: {'x_adjust': -0.0018036286628751025, 'y_adjust': 0.0031987328522817436, 'z_adjust': 1.5184118801769322}
Making the following Z adjustments:
stepper_z = 0.251698
stepper_z1 = -0.347106
Retries: 0/10 Probed points range: 0.378750 tolerance: 0.020000
Stats 841.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=32007 bytes_read=62075 bytes_retransmit=9 bytes_invalid=0 send_seq=2067 receive_seq=2067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993149 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2291 bytes_read=76720 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000557 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.59 cputime=118.955 memavail=7400740 print_time=1018.322 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 842.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=32545 bytes_read=62530 bytes_retransmit=9 bytes_invalid=0 send_seq=2092 receive_seq=2092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993141 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2297 bytes_read=76736 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999863 adj=12000559 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.59 cputime=119.012 memavail=7397732 print_time=1018.972 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
probe at 5.000,110.000 is z=1.728356
Stats 843.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=33725 bytes_read=63146 bytes_retransmit=9 bytes_invalid=0 send_seq=2131 receive_seq=2131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993146 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2303 bytes_read=76752 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000559 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.59 cputime=119.089 memavail=7397968 print_time=1020.372 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 844.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=34252 bytes_read=63591 bytes_retransmit=9 bytes_invalid=0 send_seq=2157 receive_seq=2157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993139 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2309 bytes_read=76768 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000541 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.59 cputime=119.150 memavail=7398204 print_time=1020.972 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
probe at 215.000,110.000 is z=1.728356
Calculating bed tilt with: [[5.000000000040643, 110.00000000000911, 1.728356323461195], [214.9999999999136, 110.00000000000911, 1.7283563234613508]]
Coordinate descent initial error: 0.0009368974682260934
Coordinate descent best_err: 5.53266479903096e-11  rounds: 199
Calculated bed tilt parameters: {'x_adjust': -5.00913564837179e-08, 'y_adjust': -0.00020596460931240885, 'z_adjust': 1.7510179437963127}
Making the following Z adjustments:
stepper_z = -0.022665
stepper_z1 = -0.022681
Retries: 1/10 Probed points range: 0.000000 tolerance: 0.020000
Stats 845.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=35012 bytes_read=64138 bytes_retransmit=9 bytes_invalid=0 send_seq=2188 receive_seq=2188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=119993139 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2315 bytes_read=76784 bytes_retransmit=9 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000550 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.59 cputime=119.229 memavail=7397056 print_time=1021.750 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 846.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=35233 bytes_read=64611 bytes_retransmit=9 bytes_invalid=0 send_seq=2207 receive_seq=2207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993139 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2321 bytes_read=76811 bytes_retransmit=9 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000552 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.54 cputime=119.283 memavail=7399060 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 847.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=35351 bytes_read=64901 bytes_retransmit=9 bytes_invalid=0 send_seq=2216 receive_seq=2216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993137 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2327 bytes_read=76827 bytes_retransmit=9 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000550 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.54 cputime=119.333 memavail=7397912 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 848.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=35469 bytes_read=65221 bytes_retransmit=9 bytes_invalid=0 send_seq=2225 receive_seq=2225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993133 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2333 bytes_read=76843 bytes_retransmit=9 bytes_invalid=0 send_seq=343 receive_seq=343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000551 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.54 cputime=119.381 memavail=7397188 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 849.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=35587 bytes_read=65526 bytes_retransmit=9 bytes_invalid=0 send_seq=2234 receive_seq=2234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993132 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2339 bytes_read=76859 bytes_retransmit=9 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999862 adj=12000557 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.54 cputime=119.426 memavail=7397188 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 850.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=35705 bytes_read=65816 bytes_retransmit=9 bytes_invalid=0 send_seq=2243 receive_seq=2243 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993171 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2345 bytes_read=76875 bytes_retransmit=9 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999867 adj=12000558 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.54 cputime=119.470 memavail=7397188 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 851.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=35823 bytes_read=66121 bytes_retransmit=9 bytes_invalid=0 send_seq=2252 receive_seq=2252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993167 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2351 bytes_read=76902 bytes_retransmit=9 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000565 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.50 cputime=119.517 memavail=7397188 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 852.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=35941 bytes_read=66426 bytes_retransmit=9 bytes_invalid=0 send_seq=2261 receive_seq=2261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993163 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2357 bytes_read=76918 bytes_retransmit=9 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000561 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.50 cputime=119.565 memavail=7397196 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 853.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36059 bytes_read=66731 bytes_retransmit=9 bytes_invalid=0 send_seq=2270 receive_seq=2270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993161 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2363 bytes_read=76934 bytes_retransmit=9 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999866 adj=12000556 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.50 cputime=119.607 memavail=7396944 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 854.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36177 bytes_read=67036 bytes_retransmit=9 bytes_invalid=0 send_seq=2279 receive_seq=2279 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993160 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2369 bytes_read=76950 bytes_retransmit=9 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000554 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.50 cputime=119.652 memavail=7396952 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 855.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36295 bytes_read=67341 bytes_retransmit=9 bytes_invalid=0 send_seq=2288 receive_seq=2288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993157 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2375 bytes_read=76966 bytes_retransmit=9 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999870 adj=12000631 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.50 cputime=119.696 memavail=7396448 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 856.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36413 bytes_read=67631 bytes_retransmit=9 bytes_invalid=0 send_seq=2297 receive_seq=2297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993154 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2381 bytes_read=76993 bytes_retransmit=9 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000607 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.54 cputime=119.749 memavail=7396700 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 857.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36531 bytes_read=67936 bytes_retransmit=9 bytes_invalid=0 send_seq=2306 receive_seq=2306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993151 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2387 bytes_read=77009 bytes_retransmit=9 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000590 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.54 cputime=119.803 memavail=7396700 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 858.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36649 bytes_read=68256 bytes_retransmit=9 bytes_invalid=0 send_seq=2315 receive_seq=2315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993150 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2393 bytes_read=77025 bytes_retransmit=9 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000586 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.54 cputime=119.855 memavail=7396196 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 859.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36767 bytes_read=68546 bytes_retransmit=9 bytes_invalid=0 send_seq=2324 receive_seq=2324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993167 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2399 bytes_read=77041 bytes_retransmit=9 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000578 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.54 cputime=119.906 memavail=7396208 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 860.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=36885 bytes_read=68851 bytes_retransmit=9 bytes_invalid=0 send_seq=2333 receive_seq=2333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993163 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2405 bytes_read=77057 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000550 heater_bed: target=0 temp=27.4 pwm=0.000  sysload=0.54 cputime=119.955 memavail=7396208 print_time=1022.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 861.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000007 bytes_write=37007 bytes_read=69105 bytes_retransmit=9 bytes_invalid=0 send_seq=2340 receive_seq=2340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=119993172 adxl: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2411 bytes_read=77084 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999869 adj=12000550 heater_bed: target=0 temp=27.5 pwm=0.000  sysload=0.50 cputime=120.006 memavail=7396204 print_time=1038.189 buffer_time=0.387 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Attempting MCU 'mcu' reset command
Attempting MCU 'adxl' reset command
Write g-code response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/gcode.py", line 446, in _respond_raw
    os.write(self.fd, (msg+"\n").encode())
BlockingIOError: [Errno 11] Resource temporarily unavailable
webhooks client 547746798032: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:50:08 2023 (1700369408.9 863.0)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547746225600: New connection
webhooks client 547746225600: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
Loaded MCU 'mcu' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 709, in _send_config
    self._serial.send(c)
  File "/home/pi/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/pi/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/pi/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/pi/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'P1.10' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/pi/klipper/klippy/mcu.py", line 755, in _connect
    self._send_config(None)
  File "/home/pi/klipper/klippy/mcu.py", line 720, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'P1.10' is not a valid pin name on mcu 'mcu'
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-8-g187cc2f1'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Building C code module c_helper.so
Start printer at Sat Nov 18 20:50:55 2023 (1700369455.8 909.8)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547949376272: New connection
webhooks client 547949376272: Client info {'program': 'Moonraker', 'version': 'v0.8.0-197-g975011d'}
Loaded MCU 'mcu' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 709, in _send_config
    self._serial.send(c)
  File "/home/pi/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/pi/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/pi/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/pi/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'P1.10' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/pi/klipper/klippy/mcu.py", line 755, in _connect
    self._send_config(None)
  File "/home/pi/klipper/klippy/mcu.py", line 720, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'P1.10' is not a valid pin name on mcu 'mcu'
MCU 'mcu' shutdown: oids already allocated
clocksync state: mcu_freq=12000000 last_clock=593293360 clock_est=(910.975 589197220 11999233.255) min_half_rtt=0.000078 min_rtt_time=911.316 time_avg=910.975(0.017) clock_avg=589197220.736(205364.606) pred_variance=106143168.095
Dumping serial stats: bytes_write=744 bytes_read=4142 bytes_retransmit=9 bytes_invalid=0 send_seq=95 receive_seq=95 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 87 messages
Sent 0 910.835978 910.835978 8: seq: 11, identify offset=0 count=40
Sent 1 910.871934 910.871934 8: seq: 19, identify offset=0 count=40
Sent 2 910.872535 910.872535 8: seq: 1a, identify offset=40 count=40
Sent 3 910.872918 910.872918 8: seq: 1b, identify offset=80 count=40
Sent 4 910.873280 910.873280 9: seq: 1c, identify offset=120 count=40
Sent 5 910.873647 910.873647 9: seq: 1d, identify offset=160 count=40
Sent 6 910.874040 910.874040 9: seq: 1e, identify offset=200 count=40
Sent 7 910.874410 910.874410 9: seq: 1f, identify offset=240 count=40
Sent 8 910.874758 910.874758 9: seq: 10, identify offset=280 count=40
Sent 9 910.875157 910.875157 9: seq: 11, identify offset=320 count=40
Sent 10 910.875583 910.875583 9: seq: 12, identify offset=360 count=40
Sent 11 910.875951 910.875951 9: seq: 13, identify offset=400 count=40
Sent 12 910.876307 910.876307 9: seq: 14, identify offset=440 count=40
Sent 13 910.876661 910.876661 9: seq: 15, identify offset=480 count=40
Sent 14 910.877025 910.877025 9: seq: 16, identify offset=520 count=40
Sent 15 910.877376 910.877376 9: seq: 17, identify offset=560 count=40
Sent 16 910.877726 910.877726 9: seq: 18, identify offset=600 count=40
Sent 17 910.878073 910.878073 9: seq: 19, identify offset=640 count=40
Sent 18 910.878431 910.878431 9: seq: 1a, identify offset=680 count=40
Sent 19 910.878776 910.878776 9: seq: 1b, identify offset=720 count=40
Sent 20 910.879158 910.879158 9: seq: 1c, identify offset=760 count=40
Sent 21 910.880503 910.880503 9: seq: 1d, identify offset=800 count=40
Sent 22 910.881110 910.881110 9: seq: 1e, identify offset=840 count=40
Sent 23 910.881599 910.881599 9: seq: 1f, identify offset=880 count=40
Sent 24 910.881973 910.881973 9: seq: 10, identify offset=920 count=40
Sent 25 910.882335 910.882335 9: seq: 11, identify offset=960 count=40
Sent 26 910.882705 910.882705 9: seq: 12, identify offset=1000 count=40
Sent 27 910.883097 910.883097 9: seq: 13, identify offset=1040 count=40
Sent 28 910.883464 910.883464 9: seq: 14, identify offset=1080 count=40
Sent 29 910.883807 910.883807 9: seq: 15, identify offset=1120 count=40
Sent 30 910.884161 910.884161 9: seq: 16, identify offset=1160 count=40
Sent 31 910.884576 910.884576 9: seq: 17, identify offset=1200 count=40
Sent 32 910.884927 910.884927 9: seq: 18, identify offset=1240 count=40
Sent 33 910.885279 910.885279 9: seq: 19, identify offset=1280 count=40
Sent 34 910.885615 910.885615 9: seq: 1a, identify offset=1320 count=40
Sent 35 910.885962 910.885962 9: seq: 1b, identify offset=1360 count=40
Sent 36 910.886298 910.886298 9: seq: 1c, identify offset=1400 count=40
Sent 37 910.886645 910.886645 9: seq: 1d, identify offset=1440 count=40
Sent 38 910.887085 910.887085 9: seq: 1e, identify offset=1480 count=40
Sent 39 910.887446 910.887446 9: seq: 1f, identify offset=1520 count=40
Sent 40 910.887791 910.887791 9: seq: 10, identify offset=1560 count=40
Sent 41 910.888149 910.888149 9: seq: 11, identify offset=1600 count=40
Sent 42 910.888576 910.888576 9: seq: 12, identify offset=1640 count=40
Sent 43 910.888922 910.888922 9: seq: 13, identify offset=1680 count=40
Sent 44 910.889272 910.889272 9: seq: 14, identify offset=1720 count=40
Sent 45 910.889617 910.889617 9: seq: 15, identify offset=1760 count=40
Sent 46 910.889958 910.889958 9: seq: 16, identify offset=1800 count=40
Sent 47 910.890305 910.890305 9: seq: 17, identify offset=1840 count=40
Sent 48 910.890659 910.890659 9: seq: 18, identify offset=1880 count=40
Sent 49 910.891029 910.891029 9: seq: 19, identify offset=1920 count=40
Sent 50 910.891388 910.891388 9: seq: 1a, identify offset=1960 count=40
Sent 51 910.891742 910.891742 9: seq: 1b, identify offset=2000 count=40
Sent 52 910.892081 910.892081 9: seq: 1c, identify offset=2040 count=40
Sent 53 910.892425 910.892425 9: seq: 1d, identify offset=2080 count=40
Sent 54 910.892790 910.892790 9: seq: 1e, identify offset=2120 count=40
Sent 55 910.893127 910.893127 9: seq: 1f, identify offset=2160 count=40
Sent 56 910.893469 910.893469 9: seq: 10, identify offset=2200 count=40
Sent 57 910.893820 910.893820 9: seq: 11, identify offset=2240 count=40
Sent 58 910.894158 910.894158 9: seq: 12, identify offset=2280 count=40
Sent 59 910.894570 910.894570 9: seq: 13, identify offset=2320 count=40
Sent 60 910.894916 910.894916 9: seq: 14, identify offset=2360 count=40
Sent 61 910.895284 910.895284 9: seq: 15, identify offset=2400 count=40
Sent 62 910.895624 910.895624 9: seq: 16, identify offset=2440 count=40
Sent 63 910.895962 910.895962 9: seq: 17, identify offset=2480 count=40
Sent 64 910.896335 910.896335 9: seq: 18, identify offset=2520 count=40
Sent 65 910.897558 910.897558 9: seq: 19, identify offset=2560 count=40
Sent 66 910.898397 910.898397 9: seq: 1a, identify offset=2600 count=40
Sent 67 910.898803 910.898803 9: seq: 1b, identify offset=2640 count=40
Sent 68 910.899369 910.899369 9: seq: 1c, identify offset=2680 count=40
Sent 69 910.899740 910.899740 9: seq: 1d, identify offset=2720 count=40
Sent 70 910.900134 910.900134 9: seq: 1e, identify offset=2760 count=40
Sent 71 910.900503 910.900503 9: seq: 1f, identify offset=2800 count=40
Sent 72 910.900852 910.900852 9: seq: 10, identify offset=2840 count=40
Sent 73 910.901202 910.901202 9: seq: 11, identify offset=2880 count=40
Sent 74 910.901618 910.901618 9: seq: 12, identify offset=2916 count=40
Sent 75 910.906233 910.906233 6: seq: 13, get_uptime
Sent 76 910.956938 910.956938 6: seq: 14, get_clock
Sent 77 911.008298 911.008298 6: seq: 15, get_clock
Sent 78 911.059063 911.059063 6: seq: 16, get_clock
Sent 79 911.109917 911.109917 6: seq: 17, get_clock
Sent 80 911.161204 911.161204 6: seq: 18, get_clock
Sent 81 911.212283 911.212283 6: seq: 19, get_clock
Sent 82 911.263563 911.263563 6: seq: 1a, get_clock
Sent 83 911.314421 911.314421 6: seq: 1b, get_clock
Sent 84 911.315952 911.315952 6: seq: 1c, get_config
Sent 85 911.316059 911.316059 6: seq: 1d, get_clock
Sent 86 911.319469 911.319469 7: seq: 1e, allocate_oids count=28
Dumping receive queue 86 messages
Receive: 0 910.872136 910.871934 48: seq: 1a, identify_response offset=0 data=b'x\xda\xb5\x1ako\xdb\xc8\xf1\xafl\x05\x04\xbd4\x96!\x92"%\x19\xc8\x07\xc7\x97\xb6\x87\xab\x93\\\xec\xa0\x05\x0e\x07\x82"W\xd2\xc2'
Receive: 1 910.872692 910.872535 48: seq: 1b, identify_response offset=40 data=b'|\x85K\xfa\xd1\x83\xff{gv\xf6EJ\xce\x05-\x9a\x0f\xd6>fvg\xe7=\xc3\xfc>\xdb\x0e\xa2,\xd2{\xdeI\xd1\xd4rv'
Receive: 2 910.873067 910.872918 48: seq: 1c, identify_response offset=80 data=b'1\xdb\xe7\xf9\x05\xfb!\x88/\xd6\xf3p\x11l\xe6_\xa3y\xf0f\x1b\xbcf\xeb\xf3\xe8<`\xb8\xb6X-"\xf6C\xc7K\x9eI\xfe'
Receive: 3 910.873439 910.873280 49: seq: 1d, identify_response offset=120 data=b'\x9a\xfd\n(\xf3\xf5|\xdbeu~`\x1d\xbf\x17x\x16\x0bW\xd1"\\\xfd\xc6\xb6\xa2\x1ezQJ85<\x8f\xe2\xf3p\x1e\xbe\t'
Receive: 4 910.873828 910.873647 49: seq: 1e, identify_response offset=160 data=b'\x96o\xb6\xe1kF\xf3\xd9\xd9,o\xaa*\xab\x0b\xb8\xff\xf7YV\x96M\x9e\xf5<mD!Y\xde\x0cu\xff\xf6U>\xbbX\x9f\x01'
Receive: 5 910.874209 910.874040 49: seq: 1f, identify_response offset=200 data=b'\xb1}\x0fT\xa6Y~\xc7`\x17\x96\xbd\xfd\xe5\xca\x03(\n\x03\xd06R\xfd\x88\xfa\xed\xab\x81\xb5CY\xa6CK\x08\x1b\x87\xf0u\xe0'
Receive: 6 910.874556 910.874410 49: seq: 10, identify_response offset=240 data=b"\xdd\x93=\x13\x08\xb8C\xe8\x8e\xcb>\xedE~'i\xd6\xc3\x13e%\xfa\xd4\xdc\xcaD\r\xac\xd3\xf7\x03\x819\xb0\xa4K\xe5a\xe8\x8b"
Receive: 7 910.874918 910.874758 49: seq: 11, identify_response offset=280 data=b'\xe6\xa1\x9e]\x84\xf8\xb4z\'\xf6@\xd1c\x19-cs\x85lEJ\xc3\xd9\xc5*rPuV6\xfbT\xd4\x96zE\xf6\xec"r'
Receive: 8 910.875381 910.875157 49: seq: 12, identify_response offset=320 data=b'\'i\x92\r\x04MS\xc7\x87xaA\xd5"\xef\xc6\x87\x8dx\x10\xaf,p!\xf6\xa2\xcf\xca\xb4\x19\xfa\t\xc2}V\x0e\x1c\xe7\x05\xdf'
Receive: 9 910.875748 910.875583 49: seq: 13, identify_response offset=360 data=b'eC\xd9\xa7v\xa1\xca\x1e\xd3b\xe8\xb2\x1e\x04\xae\xe8\x0c\xdcy\x1c\xe4\xd97\xed\xe8\xac|ty\x98X\xe0C\xb1\\\xae\xd6\x0b\x03\xdc'
Receive: 10 910.876110 910.875951 49: seq: 14, identify_response offset=400 data=b'\xc9T\xdf\xcd\xcd\xa0X\xdaQlG\x89\x1d\xad\xec\x88\x97\xd9\x93\x15\xda\xec"q\xdc\x15a\xce\x0c\xd3\x97n\xb9\x142,\x1eNI&'
Receive: 11 910.876464 910.876307 49: seq: 15, identify_response offset=440 data=b'Y[\xa0\xaa\x1d6al\t\x84\xa3\x9c\xfc6\x16\xaa\xe6M+\x1ey9a`\x91\xf5Y*\xc5\xbf\x81g\x87\x01\x0c\xa2O\x91q\x9e'
Receive: 12 910.876827 910.876661 49: seq: 16, identify_response offset=480 data=b'bI\x0eK\xa2\xf6\xc8\x8ec{h\xfbP\x9d\x10J\xfe\x04\xca\xe6\xce\xd0"9\x0cS!\xc1\xca\x91\x94\x96\x8e\xf1\xf0\xdc\xe9\xc1h_'
Receive: 13 910.877181 910.877025 49: seq: 17, identify_response offset=520 data=b'\xbd\xb8\xe7\xe9A\xec\x0f\xea\x85\xd1\xda\x87\x07-\xdd\x97\xfc\x98_\xcc\xee\xa5\xfdS\xcb\x897\xa3\x9b\xace\x9cB\xd6[i%\xf7o_'
Receive: 14 910.877530 910.877376 49: seq: 18, identify_response offset=560 data=b'\xfd\x05\\A\x14\x8dp\x1fD\x7f\x006\xa4\xb9\xb4B\x8c\x9c\xb6\xc9~\xb5\t\xadxr\xab?2/\xef\xecX\x14v\xf8T\xe7\xe9X'
Receive: 15 910.877877 910.877726 49: seq: 19, identify_response offset=600 data=b'UX^\x15\xe9\x91\xf6,\xbc\x1bx\xdb:c\xc2i\xaa\x95\xba\x10\x9d\x19\x92CP\xc0\x0ej(%\xf7\x0e\r\xdd\xc3\xfa\x03\xef\xaa\x06'
Receive: 16 910.878236 910.878073 49: seq: 1a, identify_response offset=640 data=b'\xec\xb4=\xc9Q\x7f\xdbc\xaa#\xaa\xaf\xf2!\xeb\xacnt\x8f\xe9\x91\x91\xb3\xde.\xa2\xe6\xf5\xa2\xe2\xa4a\xce\xa5\xf4\x1d\xf2\xc3\xb1\x15'
Receive: 17 910.878581 910.878431 49: seq: 1b, identify_response offset=680 data=b'\xce/\xf8v\x00}n\xda\xd9\xc5\xc6\xcc\xe0\x94\xbd\xd2e\x92O`\xc1:\x9e\x81\xbf\xed\n\xde\xe1}\xe0|;r\x06\xa1\x01x\xe8D'
Receive: 18 910.878930 910.878776 49: seq: 1c, identify_response offset=720 data=b'\xcf\x8f Pi\t08\x9b\xf1\x8aw{^\xe7O)z\r \x02\x96\xc8\x83\xa4\x87\xa6\xe2G\xbeYfU\xeb\x1b\x80\x9e[\xcf<'
Receive: 19 910.879395 910.879158 49: seq: 1d, identify_response offset=760 data=b'\xf6\xdd@\xba\xf3Z\xf4\\\xcb\xe3N\xec\xf7\xbc\xc3GH\xb4\x0ftL\xb1\xbb\\E\x06\xa0)\xeb\xb9eP\xb8<\x9b\xed\x04\xf8j0'
Receive: 20 910.880725 910.880503 49: seq: 1e, identify_response offset=800 data=b"\xe9\x94x\xc8\xf2.'\x8d9\x9b\xed\xc1\x9a\x15\x9d\xc0d=S0 9\x9a\x0e-J\x01\xec\xf0l\xa6\x1d_*\xe1\xbe\x144\xd0\xfa"
Receive: 21 910.881291 910.881110 49: seq: 1f, identify_response offset=840 data=b'u\x1c\x13\x9f\x93p\x02\x86"0`N\x1c\t0\x11\xddR\xd5\x14b\xf7\x94\x82\xac\xedY\x1dW&\xc5tx\x02\npW[\xd9\x86'
Receive: 22 910.881755 910.881599 49: seq: 10, identify_response offset=880 data=b'\xd0H\x86cx\\KK\xae\x9d\xc6\x82\x00\x15\xfa }O\x08S\xe5\xc7\x80G\xf8\x8b\xe2\xe5\x92t}\x19:,\xd9\xec\xfa\x87\xac\xe3'
Receive: 23 910.882129 910.881973 49: seq: 11, identify_response offset=920 data=b'>:\xd8\xa7\xb5\xc9"3\xc3S\'%1\x9d\xa4ui\xfa\xfc%>\xbf\xe0u\x0f\x8fg\xcdn\x07\x17*\xa3\xb6q\x11\xf6\x8d{V'
Receive: 24 910.882506 910.882335 49: seq: 12, identify_response offset=960 data=b"l\xb4\xd2\x8c#ogh\x0b'iJ\x1e\x0e\x83wM\x0c2#\x95\x98D\xf4\xd3I\x03\x88<\x9c (]\x1a\x9c\x13[\x05\x16`"
Receive: 25 910.882861 910.882705 49: seq: 13, identify_response offset=1000 data=b'\x1a\xfd\xffKe\xaf\x9c\xb2k\xef\xeff\x90\xc1\xec\x01\xf1\xc0\xf3;/g\x88,\r\x93\x94\xc1R\xd06\xe0O\xa6\xf7{\xe1*1\x07'
Receive: 26 910.883261 910.883097 49: seq: 14, identify_response offset=1040 data=b'\x8c\xa3\xe9K\\IVc\xf8)S\x12{\xde$\xf0\xbe\xc8\xe6\xf5\x04\xe1\x88\xcd\xf6\xc6\xa3\x10\xf6B\xbe\x876\n\x11K\xec\x88G\xab'
Receive: 27 910.883612 910.883464 49: seq: 15, identify_response offset=1080 data=b'\xd8\x1cp\xcai\xbfp\x86\'\x8a\x91$h\x02\xc1\x02|H\xe1\t"\xd9\xa8K\x06~*\x1d\xb3w4~\xa6\x10\xc4\x06e\x92(X'
Receive: 28 910.883966 910.883807 49: seq: 16, identify_response offset=1120 data=b'p+}\xb0\x12\x0b\x8c\x91\xc9\xda0\x8a\x9c\x9c\xb11\x98\x832>\xf8\x15\xe0\xee@\x85U\x8e\x02I\xf8B\x0f\x15>y\xb9\xe9}\x80'
Receive: 29 910.884383 910.884161 49: seq: 17, identify_response offset=1160 data=b'\x00P\x08\xe3\xbfa\x92K\x02\xdd\xd1\x11\x90z\x81Jl\xec\x99\xa3,\x07\x90\x12B\xaa\xf9\xa3&\x01b\xafu\x06\xa2#\xf7\x1c\x10\x90'
Receive: 30 910.884735 910.884576 49: seq: 18, identify_response offset=1200 data=b'\xe1\xc7\x1fdL\xc0\x150j/y\xc1,\x7f\xe7l\xc0\x19\xffJ\xc3y\xee\xc3\xdb\x8d\xec\xee\xc8A\xe2\x92v\x90\xe0\x9a\xb9\xe7\xde\x00'
Receive: 31 910.885085 910.884927 49: seq: 19, identify_response offset=1240 data=b'%q(\xa7\xbcc%dc|b\xd5Hq*\xab9:4\xd1t\xbc\xfc\x8e\x08\xb4\x80\x12\xa6o\xc5\x9dx3\x86:\x1dv\xe25'
Receive: 32 910.885425 910.885279 49: seq: 1a, identify_response offset=1280 data=b'B\xa9\xd4(\xc5\xd8\x06.S`\xa2i\r/\xd88\x00\x15QQ{)\xe62\x1b\x82\xbd\x80\x0c\x18p\xa4NlF\xacV\x9e\xdf\x06'
Receive: 33 910.885772 910.885615 49: seq: 1b, identify_response offset=1320 data=b'&\xf2\xdd j\x8d\x8d<D\x93=a\x01\xa0\x12k\x07\xd7\xfb\t\x13o\x9bNGk\xb2^5\xb7J\xc2\x1f[\x01"\xf1s\x83\x8d'
Receive: 34 910.886110 910.885962 49: seq: 1c, identify_response offset=1360 data=b'=i\xf2\n\x1f\x08\x9c\rE\x92Sv\xec\xd9\xc0\xf2\xd9$aX\xfa^\xfex\x95^_\xfe\x0bc\xed\x06D\xf4\xee\xcbM\xfa\xe9\xa7'
Receive: 35 910.886455 910.886298 49: seq: 1d, identify_response offset=1400 data=b'\x0f7X\xb8,2\xac\xcd[\xd1,\xce\xf0o0\x9blo\xf5\xf6Rm\xc7\xd3\xed\\o\xaf\xd5\xf6f\xba]\xe8m\xc8\xd8\xd4O4'
Receive: 36 910.886818 910.886645 49: seq: 1e, identify_response offset=1440 data=b'\x05\xe0\x06 !\x80\xd5\x14`\xa7\x01B\xa2/<"po\x00\x88\xc2\xf0\x88\xc4\x83\x01 \x1a\xc3)\x91\x81\xe1\x00\xd18%10\x1c'
Receive: 37 910.887238 910.887085 49: seq: 1f, identify_response offset=1480 data=b' \n\xa7\x04\x06\x86\x03\x81f\xe0\x94\xc0\xc0\xf2\x80\x08\x0c\xa6\x04\x06\x96\x07D`pD\xa0\xe5\x01Q\x18\x1e\x91hy@4\x86#"'
Receive: 38 910.887593 910.887446 49: seq: 10, identify_response offset=1520 data=b"\xc1d'B\x8e\x08j\n4\x16\xf5J\xfdM\xa6@\xf9D`\x1b\xfaYO\xe1\x8a\x89\xdc\xf4\x9d\xd3K-\xf3\xf5\xdb\x03\xfaYL\xc1"
Receive: 39 910.887954 910.887791 49: seq: 11, identify_response offset=1560 data=b"\xb6\x13E\x8a\xe9g9\x85\xcb'\xda@\xaf\x08\xf1\x19W\xff\xf8x\xf5s\xfa\xd7\xcf\xef\x7f\xc1\nb\xa1\xfe\x9d\xcd\xae\xaf\xbe\x00J\xd7"
Receive: 40 910.888383 910.888149 49: seq: 12, identify_response offset=1600 data=b'\x86\x8b%^\xfa\xe9\x9f\xd7d)!\x16\xca7\xb7\x97\xb77\xe9\xcd\x97\xeb\x9b_\xd2w\x977\xefq9\xc1\xe5\xf7\x9f>\xbd\xff\x9c\xbe'
Receive: 41 910.888729 910.888576 49: seq: 13, identify_response offset=1640 data=b'\xfbx\xfb\xf7\xf4\xfd\x8f\x7f\x83\xf5\xe0\x193\xfb\x01j\rU\r\xab\x86\x93\xce`\xf5\x10e@\x99.2\x9arj\xe4&\xe5\xb1\xc8\xaf'
Receive: 42 910.889079 910.888922 49: seq: 14, identify_response offset=1680 data=b'\x88F\x94\xbfk\xdd\xa7\xdc\x14\x95<\xa1\xd1A%\xfbZm\xd74\xda\xaaZJ+c@\x97\xa0\xda\x05t\x0b*X@\xd7\xa0*\x05'
Receive: 43 910.889423 910.889272 49: seq: 15, identify_response offset=1720 data=b't\x0f*\x8dr\x13\xe0\xee\x8d\x8f\xb8}\x7f\r\xef\xba\xbc\xfd\xf2Y=\x15\xc8PJ3\xbb\xf8uq\x16-~{\x1eE3\xa8\x1aU'
Receive: 44 910.889766 910.889617 49: seq: 16, identify_response offset=1760 data=b'[-\x88\xa2H=-\x93\xf1b\xb9*\xd4\xe3\xfa\x92\xc7\x8b \x04\xcaB\x8d\xa59\xa1\xb5q\xa1\x165\'\xb4^\x854"Nh\xdd'
Receive: 45 910.890115 910.889958 49: seq: 17, identify_response offset=1800 data=b'\xa0\x90\x83/\x8ci\x84\xb9\x0c\x9e\x08I\x98@\x9f\xdbA\xed\x98\x8aB\xbf\x80)o\xb8\xa3l\x94\x1aA\x97\xa5\xc8$\x16\x98 Z\x8c'
Receive: 46 910.890458 910.890305 49: seq: 18, identify_response offset=1840 data=b'\xd8,+\xd1\xcb?\xb1C&\xd5\x1a\xaf\xb3m\xc9\x0b\xea^\\\xeaMS\x85\x15\xc4\xaf\xab\xacfu\xd33\x88\x05\x0c\xe3)\x83\x14\x80'
Receive: 47 910.890815 910.890659 49: seq: 19, identify_response offset=1880 data=b'\xe2>S.\x9d=\x1c\x04\x8c\xc95K\xd6Bp\x81+)a\x01\xdc?\xf7\x98\xf40)\xf6p*\x14\xdfY\xcf\x84\xb4\x84PW\x84'
Receive: 48 910.891187 910.891029 49: seq: 1a, identify_response offset=1920 data=b'\xaaC\r,\x11\x14\xdd:\t\x91VU~\xa4\xb2G\xb8\x8e\xd7\xcc4\x0e,>0\xf0\x8a\x1a\x9e\xac\xcd:\t[\xbc\xeb\x9aNi\x8c'
Receive: 49 910.891548 910.891388 49: seq: 1b, identify_response offset=1960 data=b'\xd9\xe88\xa4i\xb2W\xba\xf3\x13\xa5\x89\xcct\xfe\\#\x92\xb25\xca\xdf\r\x94\xee\xa5*I\xb85\x00\xc3\xcb\xb2\x8aC\xaaG-\x08'
Receive: 50 910.891889 910.891742 49: seq: 1c, identify_response offset=2000 data=b'\xb3\x89m1%\xf5\xd8;\xa5j\xee\xb9!\x82a\xeb\n\xb5\xd0m\xdbF\x97mmQ2s\xb4\xaf\xeb)KT\xe4Q\x05|c\xa4'
Receive: 51 910.892235 910.892081 49: seq: 1d, identify_response offset=2040 data=b'\x9e\xa8\xf6f\x15;R\x8a\x1c\xec\xcf\xfa\x8b&Nbp\xf5\xd6u.\x9f\x1fD\xabO[z\xef\x18\xe5\xea\x1e\x0c\x96\xbd\xd7\xd9#*'
Receive: 52 910.892595 910.892425 49: seq: 1e, identify_response offset=2080 data=b'\xe1\xda0\x96ZN\xd7Ppf{\x0e\xfa\x96CfeD\x03o\xbb\x16Rr\xb8\x12\x8a\xa7b(QU\x01\x19\x13Q\xa6c\xbc\xd2'
Receive: 53 910.892936 910.892790 49: seq: 1f, identify_response offset=2120 data=b'j~\xcfQ"\x98\x83\xbe\x8cp\xc8\xbaB\xe9\xa6\x86\xc6\x8e\xcb5r\\\xe5\xe6\x0cF\xdd\xael\x1e(\xb9\xff\x00\n\x9d1z\x0e\xda'
Receive: 54 910.893279 910.893127 49: seq: 10, identify_response offset=2160 data=b'\x8er\x04\x98\xb2\xaa\x8d\x1a\xb2\xf7\x96\x92\\\xaa\xb6\xf5*\xd0\xe2\x96#\xe51\x95Y\xa19\x15b\x07y!\xdclm\x03tu\xd75'
Receive: 55 910.893626 910.893469 49: seq: 11, identify_response offset=2200 data=b'\x15 6\xc818\x139\x87u\x1e\xfc)E\xce\xa9\xbf\xfe\x99\xeb\xc7\xc0\xb3\x10\xc9\x02\xb6\x19\xea*V\x177\x16\xe0\x88+\xecA\x94'
Receive: 56 910.893967 910.893820 49: seq: 12, identify_response offset=2240 data=b'%\xa4T9\x87]\xbf)II\xa2\xc3\xb4\x9c\xf9\x06\x06\xe6a7`g$;E\x00B\x88j\xa8\xcc\x9a1\x0e`\xca\x8di<\xaa'
Receive: 57 910.894380 910.894158 49: seq: 13, identify_response offset=2280 data=b'\x16\x08\x1c\xa6,S\xb9\n\xbfY\x7f\xa3M\xb5o\x1a\xb6\xcb\xd4\xeb\xe8e\xd8\xf1\xb9\xf5U\t]\x02\x00\xaaV+5Ho\x15?\x10'
Receive: 58 910.894726 910.894570 49: seq: 14, identify_response offset=2320 data=b'\x13\xb2I\xc9\x95wT\xdf2\xa0\xda\x1e\xea;\x00\x15\xca}a\x8b\xdc[\x97n\x03t\x8ct\x19\x92^\xd9t\xca\xfc \xfb\x94,\x97'
Receive: 59 910.895080 910.894916 49: seq: 15, identify_response offset=2360 data=b'Z\x8e\xae\xf1GN\xa6\xa9K\xf0K\xf7p\x00\xfaF\xedn\xec\x83(\xd80\x9d\x14\xd3\x97\x81I\x87\xe8\x82}\x04\x87\x07\x01q\x8by'
Receive: 60 910.895432 910.895284 49: seq: 16, identify_response offset=2400 data=b'\xec\x0e;\x84\xf2O\x94.\xeb\xe2\x94ah\xd1\xd7\xc3\xaa\xfa(c=\xa2\xfeTSP8\x93\xd8}\xa9\xc1\xe8I5r\xd8V\xfe\x1a'
Receive: 61 910.895771 910.895624 49: seq: 17, identify_response offset=2440 data=b'v\xc0\x17\xab\xf6\xfb\x87\xcb\xab\x9f\xa9ok:\x97\xaa\xaa@\xae\x95Y\x87\xb1\x00\xab\xa8\x13\xa93\x8a\x8a\xe8\xc1>\xb0\xf6\xa5d.X'
Receive: 62 910.896127 910.895962 49: seq: 18, identify_response offset=2480 data=b'0@\xa89\xea\x95b\xac\x81\x1c!\n\xd6q\xac"\x99\x9e$*\x98\xd1$\x89\x95\xdca\x92$+\x18G\xcf\xcf\xaa\xc0m\xc1\x1dp'
Receive: 63 910.896496 910.896335 49: seq: 19, identify_response offset=2520 data=b"\xfa\x1c\xa5\xbb6~\xf5#\xd1/\xd69\x9f\xf4\x86\xe6\xa8%'\xbb<\xae\x16\xd7\x1d\x04S_P\x1d\xeb\x1f\xb7\x1d\x94m*\xac\x9d\xd8"
Receive: 64 910.897754 910.897558 49: seq: 1a, identify_response offset=2560 data=b'5\xf8[\n\xef\xa3\x13\x16\xacs\x8cA\xb6]4\xeaN\xd2\x91\xa7j\xffM\xe4\xbew\x8d02\xaf\x17\xc4\xd4\x8e~\x8f\xfa\xea\xa4J'
Receive: 65 910.898574 910.898397 49: seq: 1b, identify_response offset=2600 data=b"|WI\xadmG\x1fb\xa3nl\xaa\x17\xaa\xfe'\xae\x19\x05T\x05,\xb82\x9f\xf0\xb5\xea\xd8\xab\x16\xd3\xb7\xa8\xd6\x18z\x90\xba\xdb"
Receive: 66 910.899096 910.898803 49: seq: 1c, identify_response offset=2640 data=b'\xe7\xe1\xc65\x9d%\xd8\x9e\xed!\xaf7\xaeg;:\xf9\xd0T\xe0z\x8f\xef\xf0[\xc2\xc0\x9c\xc0\xb5AS\xa3\x00\xae\xb2\xa39\xb1\x05'
Receive: 67 910.899527 910.899369 49: seq: 1d, identify_response offset=2680 data=b'K3\xd3i\xf4@m\xcb\x91\x14\xe2\x1cA\xd1\xe0\x1cC\xd84\x1b\xd2<\x01.\xeb.\xd8w)\xd9\xca\x82\xff\x9fu\x0c\xcc\xdd4\xd3'
Receive: 68 910.899925 910.899740 49: seq: 1e, identify_response offset=2720 data=b"\xbe\x870\xf4\xe1'\x9bo\xff\x13e\xc3)\xca\x16^\xc7V\xeb\x81!n\xc8s\xd51\xceQ\x7f\x01\x0e\xa4\xe3\x7f\xb4Xc\xbb\xc2\x05"
Receive: 69 910.900307 910.900134 49: seq: 1f, identify_response offset=2760 data=b'\x03\xd3_=-\x98\xc8O\xa4\xbfK6\x81\x8f\xe1\xb5.|\x04\x84\x0bO5\x9c\x8e\xf4\xceo*z\n8\x0f\xa3q\x87\xe7\x8f\x14v'
Receive: 70 910.900654 910.900503 49: seq: 10, identify_response offset=2800 data=b'\xa9\x12\xf1\xaeW\xb9\xee:\xa0\xb4\\:+\x93C\xa5\x7f\xe4W2\xa6\xa5\xeb\xd9L\x1a:\xd4\x13\x17p\xeab\xe2s\xc7\x828\xe9\x86'
Receive: 71 910.901005 910.900852 49: seq: 11, identify_response offset=2840 data=b"\x06\n\x98$\x1d\xcc\xfaM\x9b\xe7\xf8\x01\xd8\xe0!'\x14\xf8\xad\x1bg\xd7yf\xfbH'?\xe3x>k\x13bLQY\x0e}\xd3"
Receive: 72 910.901424 910.901202 45: seq: 12, identify_response offset=2880 data=b'\x1c|\x87\x16\x83\xcb\xd7\xff\x01\x02J\xcc\xfb\xc5y\x10\x9c/\xe0\xda`\xbe\xdf\xf0U\x12\x17\x19\x9f=\xff\x07\x1d\xef\x00\xae'
Receive: 73 910.901744 910.901618 9: seq: 13, identify_response offset=2916 data=b''
Receive: 74 910.906414 910.906233 12: seq: 14, uptime high=0 clock=588376004
Receive: 75 910.957102 910.956938 11: seq: 15, clock clock=588984274
Receive: 76 911.008465 911.008298 11: seq: 16, clock clock=589600550
Receive: 77 911.059229 911.059063 11: seq: 17, clock clock=590209734
Receive: 78 911.110111 911.109917 11: seq: 18, clock clock=590820041
Receive: 79 911.161439 911.161204 11: seq: 19, clock clock=591435427
Receive: 80 911.212463 911.212283 11: seq: 1a, clock clock=592048501
Receive: 81 911.263749 911.263563 11: seq: 1b, clock clock=592663788
Receive: 82 911.314590 911.314421 11: seq: 1c, clock clock=593274106
Receive: 83 911.316133 911.315952 10: seq: 1d, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 84 911.316215 911.316059 11: seq: 1e, clock clock=593293360
Receive: 85 911.319729 911.319469 12: seq: 1f, shutdown clock=593334735 static_string_id=oids already allocated
Transition to shutdown state: MCU 'mcu' shutdown: oids already allocated
Dumping 4 requests for client 547949376272
Received 910.679003: b'{"id": 547817964016, "method": "info", "params": {"client_info": {"program": "Moonraker", "version": "v0.8.0-197-g975011d"}}}'
Received 910.704268: b'{"id": 547817964832, "method": "list_endpoints", "params": {}}'
Received 910.964509: b'{"id": 547817536816, "method": "info", "params": {}}'
Received 911.216700: b'{"id": 547817534416, "method": "info", "params": {}}'
Reactor garbage collection: (911.316063753, 0.0, 0.0)
webhooks client 547949376272: Disconnected
webhooks client 547957012944: New connection
webhooks client 547957012944: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Attempting MCU 'mcu' reset command
webhooks client 547957012944: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:51:17 2023 (1700369477.8 931.9)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547949656336: New connection
webhooks client 547949656336: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Loaded MCU 'mcu' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 709, in _send_config
    self._serial.send(c)
  File "/home/pi/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/pi/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/pi/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/pi/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'P1.10' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/pi/klipper/klippy/mcu.py", line 755, in _connect
    self._send_config(None)
  File "/home/pi/klipper/klippy/mcu.py", line 720, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'P1.10' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
webhooks client 547949656336: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:51:45 2023 (1700369505.4 959.4)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/pi/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/pi/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/pi/klipper/klippy/extras/tmc2209.py", line 102, in load_config_prefix
    return TMC2209(config)
  File "/home/pi/klipper/klippy/extras/tmc2209.py", line 61, in __init__
    self.mcu_tmc = tmc_uart.MCU_TMC_uart(config, Registers, self.fields, 3,
  File "/home/pi/klipper/klippy/extras/tmc_uart.py", line 219, in __init__
    self.instance_id, self.addr, self.mcu_uart = lookup_tmc_uart_bitbang(
  File "/home/pi/klipper/klippy/extras/tmc_uart.py", line 191, in lookup_tmc_uart_bitbang
    rx_pin_params = ppins.lookup_pin(config.get('uart_pin'), can_pullup=True,
  File "/home/pi/klipper/klippy/configfile.py", line 57, in get
    return self._get_wrapper(self.fileconfig.get, option, default,
  File "/home/pi/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'uart_pin' in section 'tmc2209 stepper_x' must be specified
webhooks client 547957346944: New connection
webhooks client 547957346944: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Attempting MCU 'mcu' reset
webhooks client 547957346944: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:52:49 2023 (1700369569.5 1023.6)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/pi/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/pi/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/pi/klipper/klippy/extras/tmc2209.py", line 102, in load_config_prefix
    return TMC2209(config)
  File "/home/pi/klipper/klippy/extras/tmc2209.py", line 61, in __init__
    self.mcu_tmc = tmc_uart.MCU_TMC_uart(config, Registers, self.fields, 3,
  File "/home/pi/klipper/klippy/extras/tmc_uart.py", line 219, in __init__
    self.instance_id, self.addr, self.mcu_uart = lookup_tmc_uart_bitbang(
  File "/home/pi/klipper/klippy/extras/tmc_uart.py", line 191, in lookup_tmc_uart_bitbang
    rx_pin_params = ppins.lookup_pin(config.get('uart_pin'), can_pullup=True,
  File "/home/pi/klipper/klippy/configfile.py", line 57, in get
    return self._get_wrapper(self.fileconfig.get, option, default,
  File "/home/pi/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'uart_pin' in section 'tmc2209 stepper_x' must be specified
webhooks client 547957044656: New connection
webhooks client 547957044656: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Attempting MCU 'mcu' reset
webhooks client 547957044656: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:53:02 2023 (1700369582.0 1036.1)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547949434240: New connection
webhooks client 547949434240: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Loaded MCU 'mcu' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 709, in _send_config
    self._serial.send(c)
  File "/home/pi/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/pi/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/pi/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/pi/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'P1.10' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/pi/klipper/klippy/mcu.py", line 755, in _connect
    self._send_config(None)
  File "/home/pi/klipper/klippy/mcu.py", line 720, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'P1.10' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
webhooks client 547949434240: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:54:27 2023 (1700369668.0 1122.1)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547950088496: New connection
webhooks client 547950088496: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Loaded MCU 'mcu' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 709, in _send_config
    self._serial.send(c)
  File "/home/pi/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/pi/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/pi/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/pi/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'P1.10' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/pi/klipper/klippy/mcu.py", line 755, in _connect
    self._send_config(None)
  File "/home/pi/klipper/klippy/mcu.py", line 720, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'P1.10' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
webhooks client 547950088496: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:54:52 2023 (1700369692.6 1146.7)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_x]
uart_pin = P1.8
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/pi/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/pi/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/pi/klipper/klippy/extras/tmc2209.py", line 102, in load_config_prefix
    return TMC2209(config)
  File "/home/pi/klipper/klippy/extras/tmc2209.py", line 61, in __init__
    self.mcu_tmc = tmc_uart.MCU_TMC_uart(config, Registers, self.fields, 3,
  File "/home/pi/klipper/klippy/extras/tmc_uart.py", line 219, in __init__
    self.instance_id, self.addr, self.mcu_uart = lookup_tmc_uart_bitbang(
  File "/home/pi/klipper/klippy/extras/tmc_uart.py", line 207, in lookup_tmc_uart_bitbang
    instance_id = mcu_uart.register_instance(rx_pin_params, tx_pin_params,
  File "/home/pi/klipper/klippy/extras/tmc_uart.py", line 117, in register_instance
    raise self.mcu.get_printer().config_error(
configparser.Error: Shared TMC uarts need unique address or select_pins polarity
webhooks client 547957080704: New connection
webhooks client 547957080704: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Attempting MCU 'mcu' reset
webhooks client 547957080704: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:55:19 2023 (1700369719.8 1173.8)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_x]
uart_pin = P1.13
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547949795024: New connection
webhooks client 547949795024: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Loaded MCU 'mcu' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 709, in _send_config
    self._serial.send(c)
  File "/home/pi/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/pi/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/pi/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/pi/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'P1.13' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/pi/klipper/klippy/mcu.py", line 755, in _connect
    self._send_config(None)
  File "/home/pi/klipper/klippy/mcu.py", line 720, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'P1.13' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
webhooks client 547949795024: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:55:55 2023 (1700369755.5 1209.6)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/pi/klipper/klippy/klippy.py", line 143, in _read_config
    m.add_printer_objects(config)
  File "/home/pi/klipper/klippy/toolhead.py", line 606, in add_printer_objects
    config.get_printer().add_object('toolhead', ToolHead(config))
  File "/home/pi/klipper/klippy/toolhead.py", line 257, in __init__
    self.kin = mod.load_kinematics(self, config)
  File "/home/pi/klipper/klippy/kinematics/cartesian.py", line 126, in load_kinematics
    return CartKinematics(toolhead, config)
  File "/home/pi/klipper/klippy/kinematics/cartesian.py", line 16, in __init__
    self.rails = [stepper.LookupMultiRail(config.getsection('stepper_' + n))
  File "/home/pi/klipper/klippy/kinematics/cartesian.py", line 16, in <listcomp>
    self.rails = [stepper.LookupMultiRail(config.getsection('stepper_' + n))
  File "/home/pi/klipper/klippy/stepper.py", line 423, in LookupMultiRail
    rail = PrinterRail(config, need_position_minmax,
  File "/home/pi/klipper/klippy/stepper.py", line 304, in __init__
    self.add_extra_stepper(config)
  File "/home/pi/klipper/klippy/stepper.py", line 383, in add_extra_stepper
    pin_params = ppins.parse_pin(endstop_pin, True, True)
  File "/home/pi/klipper/klippy/pins.py", line 83, in parse_pin
    raise error("Unknown pin chip name '%s'" % (chip_name,))
pins.error: Unknown pin chip name 'tmc2209_stepper_x'
webhooks client 547957346896: New connection
webhooks client 547957346896: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Attempting MCU 'mcu' reset
webhooks client 547957346896: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:56:10 2023 (1700369770.8 1224.9)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/pi/klipper/klippy/klippy.py", line 143, in _read_config
    m.add_printer_objects(config)
  File "/home/pi/klipper/klippy/toolhead.py", line 606, in add_printer_objects
    config.get_printer().add_object('toolhead', ToolHead(config))
  File "/home/pi/klipper/klippy/toolhead.py", line 257, in __init__
    self.kin = mod.load_kinematics(self, config)
  File "/home/pi/klipper/klippy/kinematics/cartesian.py", line 126, in load_kinematics
    return CartKinematics(toolhead, config)
  File "/home/pi/klipper/klippy/kinematics/cartesian.py", line 16, in __init__
    self.rails = [stepper.LookupMultiRail(config.getsection('stepper_' + n))
  File "/home/pi/klipper/klippy/kinematics/cartesian.py", line 16, in <listcomp>
    self.rails = [stepper.LookupMultiRail(config.getsection('stepper_' + n))
  File "/home/pi/klipper/klippy/stepper.py", line 423, in LookupMultiRail
    rail = PrinterRail(config, need_position_minmax,
  File "/home/pi/klipper/klippy/stepper.py", line 304, in __init__
    self.add_extra_stepper(config)
  File "/home/pi/klipper/klippy/stepper.py", line 380, in add_extra_stepper
    endstop_pin = config.get('endstop_pin')
  File "/home/pi/klipper/klippy/configfile.py", line 57, in get
    return self._get_wrapper(self.fileconfig.get, option, default,
  File "/home/pi/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'endstop_pin' in section 'stepper_x' must be specified
webhooks client 547957044560: New connection
webhooks client 547957044560: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Attempting MCU 'mcu' reset
webhooks client 547957044560: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:56:28 2023 (1700369788.9 1242.9)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = P2.8
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/pi/klipper/klippy/klippy.py", line 143, in _read_config
    m.add_printer_objects(config)
  File "/home/pi/klipper/klippy/toolhead.py", line 606, in add_printer_objects
    config.get_printer().add_object('toolhead', ToolHead(config))
  File "/home/pi/klipper/klippy/toolhead.py", line 257, in __init__
    self.kin = mod.load_kinematics(self, config)
  File "/home/pi/klipper/klippy/kinematics/cartesian.py", line 126, in load_kinematics
    return CartKinematics(toolhead, config)
  File "/home/pi/klipper/klippy/kinematics/cartesian.py", line 16, in __init__
    self.rails = [stepper.LookupMultiRail(config.getsection('stepper_' + n))
  File "/home/pi/klipper/klippy/kinematics/cartesian.py", line 16, in <listcomp>
    self.rails = [stepper.LookupMultiRail(config.getsection('stepper_' + n))
  File "/home/pi/klipper/klippy/stepper.py", line 423, in LookupMultiRail
    rail = PrinterRail(config, need_position_minmax,
  File "/home/pi/klipper/klippy/stepper.py", line 304, in __init__
    self.add_extra_stepper(config)
  File "/home/pi/klipper/klippy/stepper.py", line 374, in add_extra_stepper
    stepper = PrinterStepper(config, self.stepper_units_in_radians)
  File "/home/pi/klipper/klippy/stepper.py", line 254, in PrinterStepper
    m.register_stepper(config, mcu_stepper)
  File "/home/pi/klipper/klippy/extras/stepper_enable.py", line 89, in register_stepper
    enable = setup_enable_pin(self.printer, config.get('enable_pin', None))
  File "/home/pi/klipper/klippy/extras/stepper_enable.py", line 32, in setup_enable_pin
    pin_params = ppins.lookup_pin(pin, can_invert=True,
  File "/home/pi/klipper/klippy/pins.py", line 106, in lookup_pin
    raise error("pin %s used multiple times in config" % (pin,))
pins.error: pin P2.8 used multiple times in config
webhooks client 547948909088: New connection
webhooks client 547948909088: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Attempting MCU 'mcu' reset
webhooks client 547948909088: Disconnected
Restarting printer
Start printer at Sat Nov 18 20:56:48 2023 (1700369808.2 1262.3)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547957744688: New connection
webhooks client 547957744688: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
mcu 'mcu': got {'count': 341, 'sum': 36723, 'sumsq': 37434, '#name': 'stats', '#sent_time': 1263.557624598, '#receive_time': 1263.558028617}
Loaded MCU 'mcu' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 709, in _send_config
    self._serial.send(c)
  File "/home/pi/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/pi/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/pi/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/pi/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'P1.10' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/pi/klipper/klippy/mcu.py", line 755, in _connect
    self._send_config(None)
  File "/home/pi/klipper/klippy/mcu.py", line 720, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'P1.10' is not a valid pin name on mcu 'mcu'
Attempting MCU 'mcu' reset command
webhooks client 547957744688: Disconnected
Restarting printer
Start printer at Sat Nov 18 21:04:04 2023 (1700370244.5 1698.6)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547949656720: New connection
webhooks client 547949656720: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Loaded MCU 'mcu' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 709, in _send_config
    self._serial.send(c)
  File "/home/pi/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/pi/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/pi/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/pi/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'P1.10' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/pi/klipper/klippy/mcu.py", line 755, in _connect
    self._send_config(None)
  File "/home/pi/klipper/klippy/mcu.py", line 720, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'P1.10' is not a valid pin name on mcu 'mcu'
webhooks client 547949656720: Disconnected
Restarting printer
Start printer at Sat Nov 18 21:06:04 2023 (1700370364.4 1818.5)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547949651232: New connection
webhooks client 547949651232: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Loaded MCU 'mcu' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 709, in _send_config
    self._serial.send(c)
  File "/home/pi/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/pi/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/pi/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/pi/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'P1.10' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/pi/klipper/klippy/mcu.py", line 755, in _connect
    self._send_config(None)
  File "/home/pi/klipper/klippy/mcu.py", line 720, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'P1.10' is not a valid pin name on mcu 'mcu'
MCU 'mcu' shutdown: oids already allocated
clocksync state: mcu_freq=12000000 last_clock=1467789644 clock_est=(1819.505 1463708887 11999667.562) min_half_rtt=0.000061 min_rtt_time=1819.845 time_avg=1819.505(0.017) clock_avg=1463708887.854(204432.929) pred_variance=106168682.261
Dumping serial stats: bytes_write=744 bytes_read=4142 bytes_retransmit=9 bytes_invalid=0 send_seq=99 receive_seq=99 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 87 messages
Sent 0 1819.370276 1819.370276 8: seq: 11, identify offset=0 count=40
Sent 1 1819.405957 1819.405957 8: seq: 1d, identify offset=0 count=40
Sent 2 1819.406464 1819.406464 8: seq: 1e, identify offset=40 count=40
Sent 3 1819.406887 1819.406887 8: seq: 1f, identify offset=80 count=40
Sent 4 1819.407253 1819.407253 9: seq: 10, identify offset=120 count=40
Sent 5 1819.407616 1819.407616 9: seq: 11, identify offset=160 count=40
Sent 6 1819.407966 1819.407966 9: seq: 12, identify offset=200 count=40
Sent 7 1819.408323 1819.408323 9: seq: 13, identify offset=240 count=40
Sent 8 1819.408671 1819.408671 9: seq: 14, identify offset=280 count=40
Sent 9 1819.409073 1819.409073 9: seq: 15, identify offset=320 count=40
Sent 10 1819.409442 1819.409442 9: seq: 16, identify offset=360 count=40
Sent 11 1819.409787 1819.409787 9: seq: 17, identify offset=400 count=40
Sent 12 1819.410131 1819.410131 9: seq: 18, identify offset=440 count=40
Sent 13 1819.410487 1819.410487 9: seq: 19, identify offset=480 count=40
Sent 14 1819.410850 1819.410850 9: seq: 1a, identify offset=520 count=40
Sent 15 1819.411196 1819.411196 9: seq: 1b, identify offset=560 count=40
Sent 16 1819.411548 1819.411548 9: seq: 1c, identify offset=600 count=40
Sent 17 1819.411904 1819.411904 9: seq: 1d, identify offset=640 count=40
Sent 18 1819.412256 1819.412256 9: seq: 1e, identify offset=680 count=40
Sent 19 1819.412609 1819.412609 9: seq: 1f, identify offset=720 count=40
Sent 20 1819.412950 1819.412950 9: seq: 10, identify offset=760 count=40
Sent 21 1819.413296 1819.413296 9: seq: 11, identify offset=800 count=40
Sent 22 1819.413646 1819.413646 9: seq: 12, identify offset=840 count=40
Sent 23 1819.414063 1819.414063 9: seq: 13, identify offset=880 count=40
Sent 24 1819.414411 1819.414411 9: seq: 14, identify offset=920 count=40
Sent 25 1819.414791 1819.414791 9: seq: 15, identify offset=960 count=40
Sent 26 1819.415154 1819.415154 9: seq: 16, identify offset=1000 count=40
Sent 27 1819.415496 1819.415496 9: seq: 17, identify offset=1040 count=40
Sent 28 1819.415844 1819.415844 9: seq: 18, identify offset=1080 count=40
Sent 29 1819.416197 1819.416197 9: seq: 19, identify offset=1120 count=40
Sent 30 1819.416549 1819.416549 9: seq: 1a, identify offset=1160 count=40
Sent 31 1819.416898 1819.416898 9: seq: 1b, identify offset=1200 count=40
Sent 32 1819.417248 1819.417248 9: seq: 1c, identify offset=1240 count=40
Sent 33 1819.417587 1819.417587 9: seq: 1d, identify offset=1280 count=40
Sent 34 1819.417927 1819.417927 9: seq: 1e, identify offset=1320 count=40
Sent 35 1819.418264 1819.418264 9: seq: 1f, identify offset=1360 count=40
Sent 36 1819.418610 1819.418610 9: seq: 10, identify offset=1400 count=40
Sent 37 1819.418980 1819.418980 9: seq: 11, identify offset=1440 count=40
Sent 38 1819.419333 1819.419333 9: seq: 12, identify offset=1480 count=40
Sent 39 1819.419695 1819.419695 9: seq: 13, identify offset=1520 count=40
Sent 40 1819.420113 1819.420113 9: seq: 14, identify offset=1560 count=40
Sent 41 1819.420452 1819.420452 9: seq: 15, identify offset=1600 count=40
Sent 42 1819.420805 1819.420805 9: seq: 16, identify offset=1640 count=40
Sent 43 1819.421160 1819.421160 9: seq: 17, identify offset=1680 count=40
Sent 44 1819.421507 1819.421507 9: seq: 18, identify offset=1720 count=40
Sent 45 1819.421861 1819.421861 9: seq: 19, identify offset=1760 count=40
Sent 46 1819.422205 1819.422205 9: seq: 1a, identify offset=1800 count=40
Sent 47 1819.422551 1819.422551 9: seq: 1b, identify offset=1840 count=40
Sent 48 1819.422909 1819.422909 9: seq: 1c, identify offset=1880 count=40
Sent 49 1819.423258 1819.423258 9: seq: 1d, identify offset=1920 count=40
Sent 50 1819.423606 1819.423606 9: seq: 1e, identify offset=1960 count=40
Sent 51 1819.423949 1819.423949 9: seq: 1f, identify offset=2000 count=40
Sent 52 1819.424299 1819.424299 9: seq: 10, identify offset=2040 count=40
Sent 53 1819.424650 1819.424650 9: seq: 11, identify offset=2080 count=40
Sent 54 1819.424995 1819.424995 9: seq: 12, identify offset=2120 count=40
Sent 55 1819.425340 1819.425340 9: seq: 13, identify offset=2160 count=40
Sent 56 1819.425695 1819.425695 9: seq: 14, identify offset=2200 count=40
Sent 57 1819.426106 1819.426106 9: seq: 15, identify offset=2240 count=40
Sent 58 1819.426443 1819.426443 9: seq: 16, identify offset=2280 count=40
Sent 59 1819.426808 1819.426808 9: seq: 17, identify offset=2320 count=40
Sent 60 1819.427158 1819.427158 9: seq: 18, identify offset=2360 count=40
Sent 61 1819.427495 1819.427495 9: seq: 19, identify offset=2400 count=40
Sent 62 1819.427829 1819.427829 9: seq: 1a, identify offset=2440 count=40
Sent 63 1819.428172 1819.428172 9: seq: 1b, identify offset=2480 count=40
Sent 64 1819.428516 1819.428516 9: seq: 1c, identify offset=2520 count=40
Sent 65 1819.428860 1819.428860 9: seq: 1d, identify offset=2560 count=40
Sent 66 1819.429204 1819.429204 9: seq: 1e, identify offset=2600 count=40
Sent 67 1819.429543 1819.429543 9: seq: 1f, identify offset=2640 count=40
Sent 68 1819.429896 1819.429896 9: seq: 10, identify offset=2680 count=40
Sent 69 1819.430236 1819.430236 9: seq: 11, identify offset=2720 count=40
Sent 70 1819.430574 1819.430574 9: seq: 12, identify offset=2760 count=40
Sent 71 1819.430917 1819.430917 9: seq: 13, identify offset=2800 count=40
Sent 72 1819.431254 1819.431254 9: seq: 14, identify offset=2840 count=40
Sent 73 1819.431609 1819.431609 9: seq: 15, identify offset=2880 count=40
Sent 74 1819.431949 1819.431949 9: seq: 16, identify offset=2916 count=40
Sent 75 1819.436584 1819.436584 6: seq: 17, get_uptime
Sent 76 1819.488315 1819.488315 6: seq: 18, get_clock
Sent 77 1819.539066 1819.539066 6: seq: 19, get_clock
Sent 78 1819.589711 1819.589711 6: seq: 1a, get_clock
Sent 79 1819.640327 1819.640327 6: seq: 1b, get_clock
Sent 80 1819.690921 1819.690921 6: seq: 1c, get_clock
Sent 81 1819.742506 1819.742506 6: seq: 1d, get_clock
Sent 82 1819.793105 1819.793105 6: seq: 1e, get_clock
Sent 83 1819.843623 1819.843623 6: seq: 1f, get_clock
Sent 84 1819.844630 1819.844630 6: seq: 10, get_config
Sent 85 1819.845022 1819.845022 6: seq: 11, get_clock
Sent 86 1819.847286 1819.847286 7: seq: 12, allocate_oids count=28
Dumping receive queue 86 messages
Receive: 0 1819.406128 1819.405957 48: seq: 1e, identify_response offset=0 data=b'x\xda\xb5\x1ako\xdb\xc8\xf1\xafl\x05\x04\xbd4\x96!\x92"%\x19\xc8\x07\xc7\x97\xb6\x87\xab\x93\\\xec\xa0\x05\x0e\x07\x82"W\xd2\xc2'
Receive: 1 1819.406622 1819.406464 48: seq: 1f, identify_response offset=40 data=b'|\x85K\xfa\xd1\x83\xff{gv\xf6EJ\xce\x05-\x9a\x0f\xd6>fvg\xe7=\xc3\xfc>\xdb\x0e\xa2,\xd2{\xdeI\xd1\xd4rv'
Receive: 2 1819.407035 1819.406887 48: seq: 10, identify_response offset=80 data=b'1\xdb\xe7\xf9\x05\xfb!\x88/\xd6\xf3p\x11l\xe6_\xa3y\xf0f\x1b\xbcf\xeb\xf3\xe8<`\xb8\xb6X-"\xf6C\xc7K\x9eI\xfe'
Receive: 3 1819.407405 1819.407253 49: seq: 11, identify_response offset=120 data=b'\x9a\xfd\n(\xf3\xf5|\xdbeu~`\x1d\xbf\x17x\x16\x0bW\xd1"\\\xfd\xc6\xb6\xa2\x1ezQJ85<\x8f\xe2\xf3p\x1e\xbe\t'
Receive: 4 1819.407762 1819.407616 49: seq: 12, identify_response offset=160 data=b'\x96o\xb6\xe1kF\xf3\xd9\xd9,o\xaa*\xab\x0b\xb8\xff\xf7YV\x96M\x9e\xf5<mD!Y\xde\x0cu\xff\xf6U>\xbbX\x9f\x01'
Receive: 5 1819.408117 1819.407966 49: seq: 13, identify_response offset=200 data=b'\xb1}\x0fT\xa6Y~\xc7`\x17\x96\xbd\xfd\xe5\xca\x03(\n\x03\xd06R\xfd\x88\xfa\xed\xab\x81\xb5CY\xa6CK\x08\x1b\x87\xf0u\xe0'
Receive: 6 1819.408470 1819.408323 49: seq: 14, identify_response offset=240 data=b"\xdd\x93=\x13\x08\xb8C\xe8\x8e\xcb>\xedE~'i\xd6\xc3\x13e%\xfa\xd4\xdc\xcaD\r\xac\xd3\xf7\x03\x819\xb0\xa4K\xe5a\xe8\x8b"
Receive: 7 1819.408873 1819.408671 49: seq: 15, identify_response offset=280 data=b'\xe6\xa1\x9e]\x84\xf8\xb4z\'\xf6@\xd1c\x19-cs\x85lEJ\xc3\xd9\xc5*rPuV6\xfbT\xd4\x96zE\xf6\xec"r'
Receive: 8 1819.409241 1819.409073 49: seq: 16, identify_response offset=320 data=b'\'i\x92\r\x04MS\xc7\x87xaA\xd5"\xef\xc6\x87\x8dx\x10\xaf,p!\xf6\xa2\xcf\xca\xb4\x19\xfa\t\xc2}V\x0e\x1c\xe7\x05\xdf'
Receive: 9 1819.409588 1819.409442 49: seq: 17, identify_response offset=360 data=b'eC\xd9\xa7v\xa1\xca\x1e\xd3b\xe8\xb2\x1e\x04\xae\xe8\x0c\xdcy\x1c\xe4\xd97\xed\xe8\xac|ty\x98X\xe0C\xb1\\\xae\xd6\x0b\x03\xdc'
Receive: 10 1819.409933 1819.409787 49: seq: 18, identify_response offset=400 data=b'\xc9T\xdf\xcd\xcd\xa0X\xdaQlG\x89\x1d\xad\xec\x88\x97\xd9\x93\x15\xda\xec"q\xdc\x15a\xce\x0c\xd3\x97n\xb9\x142,\x1eNI&'
Receive: 11 1819.410287 1819.410131 49: seq: 19, identify_response offset=440 data=b'Y[\xa0\xaa\x1d6al\t\x84\xa3\x9c\xfc6\x16\xaa\xe6M+\x1ey9a`\x91\xf5Y*\xc5\xbf\x81g\x87\x01\x0c\xa2O\x91q\x9e'
Receive: 12 1819.410629 1819.410487 49: seq: 1a, identify_response offset=480 data=b'bI\x0eK\xa2\xf6\xc8\x8ec{h\xfbP\x9d\x10J\xfe\x04\xca\xe6\xce\xd0"9\x0cS!\xc1\xca\x91\x94\x96\x8e\xf1\xf0\xdc\xe9\xc1h_'
Receive: 13 1819.410995 1819.410850 49: seq: 1b, identify_response offset=520 data=b'\xbd\xb8\xe7\xe9A\xec\x0f\xea\x85\xd1\xda\x87\x07-\xdd\x97\xfc\x98_\xcc\xee\xa5\xfdS\xcb\x897\xa3\x9b\xace\x9cB\xd6[i%\xf7o_'
Receive: 14 1819.411344 1819.411196 49: seq: 1c, identify_response offset=560 data=b'\xfd\x05\\A\x14\x8dp\x1fD\x7f\x006\xa4\xb9\xb4B\x8c\x9c\xb6\xc9~\xb5\t\xadxr\xab?2/\xef\xecX\x14v\xf8T\xe7\xe9X'
Receive: 15 1819.411703 1819.411548 49: seq: 1d, identify_response offset=600 data=b'UX^\x15\xe9\x91\xf6,\xbc\x1bx\xdb:c\xc2i\xaa\x95\xba\x10\x9d\x19\x92CP\xc0\x0ej(%\xf7\x0e\r\xdd\xc3\xfa\x03\xef\xaa\x06'
Receive: 16 1819.412057 1819.411904 49: seq: 1e, identify_response offset=640 data=b'\xec\xb4=\xc9Q\x7f\xdbc\xaa#\xaa\xaf\xf2!\xeb\xacnt\x8f\xe9\x91\x91\xb3\xde.\xa2\xe6\xf5\xa2\xe2\xa4a\xce\xa5\xf4\x1d\xf2\xc3\xb1\x15'
Receive: 17 1819.412412 1819.412256 49: seq: 1f, identify_response offset=680 data=b'\xce/\xf8v\x00}n\xda\xd9\xc5\xc6\xcc\xe0\x94\xbd\xd2e\x92O`\xc1:\x9e\x81\xbf\xed\n\xde\xe1}\xe0|;r\x06\xa1\x01x\xe8D'
Receive: 18 1819.412753 1819.412609 49: seq: 10, identify_response offset=720 data=b'\xcf\x8f Pi\t08\x9b\xf1\x8aw{^\xe7O)z\r \x02\x96\xc8\x83\xa4\x87\xa6\xe2G\xbeYfU\xeb\x1b\x80\x9e[\xcf<'
Receive: 19 1819.413103 1819.412950 49: seq: 11, identify_response offset=760 data=b'\xf6\xdd@\xba\xf3Z\xf4\\\xcb\xe3N\xec\xf7\xbc\xc3GH\xb4\x0ftL\xb1\xbb\\E\x06\xa0)\xeb\xb9eP\xb8<\x9b\xed\x04\xf8j0'
Receive: 20 1819.413449 1819.413296 49: seq: 12, identify_response offset=800 data=b"\xe9\x94x\xc8\xf2.'\x8d9\x9b\xed\xc1\x9a\x15\x9d\xc0d=S0 9\x9a\x0e-J\x01\xec\xf0l\xa6\x1d_*\xe1\xbe\x144\xd0\xfa"
Receive: 21 1819.413871 1819.413646 49: seq: 13, identify_response offset=840 data=b'u\x1c\x13\x9f\x93p\x02\x86"0`N\x1c\t0\x11\xddR\xd5\x14b\xf7\x94\x82\xac\xedY\x1dW&\xc5tx\x02\npW[\xd9\x86'
Receive: 22 1819.414214 1819.414063 49: seq: 14, identify_response offset=880 data=b'\xd0H\x86cx\\KK\xae\x9d\xc6\x82\x00\x15\xfa }O\x08S\xe5\xc7\x80G\xf8\x8b\xe2\xe5\x92t}\x19:,\xd9\xec\xfa\x87\xac\xe3'
Receive: 23 1819.414571 1819.414411 49: seq: 15, identify_response offset=920 data=b'>:\xd8\xa7\xb5\xc9"3\xc3S\'%1\x9d\xa4ui\xfa\xfc%>\xbf\xe0u\x0f\x8fg\xcdn\x07\x17*\xa3\xb6q\x11\xf6\x8d{V'
Receive: 24 1819.414951 1819.414791 49: seq: 16, identify_response offset=960 data=b"l\xb4\xd2\x8c#ogh\x0b'iJ\x1e\x0e\x83wM\x0c2#\x95\x98D\xf4\xd3I\x03\x88<\x9c (]\x1a\x9c\x13[\x05\x16`"
Receive: 25 1819.415297 1819.415154 49: seq: 17, identify_response offset=1000 data=b'\x1a\xfd\xffKe\xaf\x9c\xb2k\xef\xeff\x90\xc1\xec\x01\xf1\xc0\xf3;/g\x88,\r\x93\x94\xc1R\xd06\xe0O\xa6\xf7{\xe1*1\x07'
Receive: 26 1819.415646 1819.415496 49: seq: 18, identify_response offset=1040 data=b'\x8c\xa3\xe9K\\IVc\xf8)S\x12{\xde$\xf0\xbe\xc8\xe6\xf5\x04\xe1\x88\xcd\xf6\xc6\xa3\x10\xf6B\xbe\x876\n\x11K\xec\x88G\xab'
Receive: 27 1819.415999 1819.415844 49: seq: 19, identify_response offset=1080 data=b'\xd8\x1cp\xcai\xbfp\x86\'\x8a\x91$h\x02\xc1\x02|H\xe1\t"\xd9\xa8K\x06~*\x1d\xb3w4~\xa6\x10\xc4\x06e\x92(X'
Receive: 28 1819.416352 1819.416197 49: seq: 1a, identify_response offset=1120 data=b'p+}\xb0\x12\x0b\x8c\x91\xc9\xda0\x8a\x9c\x9c\xb11\x98\x832>\xf8\x15\xe0\xee@\x85U\x8e\x02I\xf8B\x0f\x15>y\xb9\xe9}\x80'
Receive: 29 1819.416703 1819.416549 49: seq: 1b, identify_response offset=1160 data=b'\x00P\x08\xe3\xbfa\x92K\x02\xdd\xd1\x11\x90z\x81Jl\xec\x99\xa3,\x07\x90\x12B\xaa\xf9\xa3&\x01b\xafu\x06\xa2#\xf7\x1c\x10\x90'
Receive: 30 1819.417052 1819.416898 49: seq: 1c, identify_response offset=1200 data=b'\xe1\xc7\x1fdL\xc0\x150j/y\xc1,\x7f\xe7l\xc0\x19\xffJ\xc3y\xee\xc3\xdb\x8d\xec\xee\xc8A\xe2\x92v\x90\xe0\x9a\xb9\xe7\xde\x00'
Receive: 31 1819.417391 1819.417248 49: seq: 1d, identify_response offset=1240 data=b'%q(\xa7\xbcc%dc|b\xd5Hq*\xab9:4\xd1t\xbc\xfc\x8e\x08\xb4\x80\x12\xa6o\xc5\x9dx3\x86:\x1dv\xe25'
Receive: 32 1819.417731 1819.417587 49: seq: 1e, identify_response offset=1280 data=b'B\xa9\xd4(\xc5\xd8\x06.S`\xa2i\r/\xd88\x00\x15QQ{)\xe62\x1b\x82\xbd\x80\x0c\x18p\xa4NlF\xacV\x9e\xdf\x06'
Receive: 33 1819.418072 1819.417927 49: seq: 1f, identify_response offset=1320 data=b'&\xf2\xdd j\x8d\x8d<D\x93=a\x01\xa0\x12k\x07\xd7\xfb\t\x13o\x9bNGk\xb2^5\xb7J\xc2\x1f[\x01"\xf1s\x83\x8d'
Receive: 34 1819.418416 1819.418264 49: seq: 10, identify_response offset=1360 data=b'=i\xf2\n\x1f\x08\x9c\rE\x92Sv\xec\xd9\xc0\xf2\xd9$aX\xfa^\xfex\x95^_\xfe\x0bc\xed\x06D\xf4\xee\xcbM\xfa\xe9\xa7'
Receive: 35 1819.418763 1819.418610 49: seq: 11, identify_response offset=1400 data=b'\x0f7X\xb8,2\xac\xcd[\xd1,\xce\xf0o0\x9blo\xf5\xf6Rm\xc7\xd3\xed\\o\xaf\xd5\xf6f\xba]\xe8m\xc8\xd8\xd4O4'
Receive: 36 1819.419133 1819.418980 49: seq: 12, identify_response offset=1440 data=b'\x05\xe0\x06 !\x80\xd5\x14`\xa7\x01B\xa2/<"po\x00\x88\xc2\xf0\x88\xc4\x83\x01 \x1a\xc3)\x91\x81\xe1\x00\xd18%10\x1c'
Receive: 37 1819.419492 1819.419333 49: seq: 13, identify_response offset=1480 data=b' \n\xa7\x04\x06\x86\x03\x81f\xe0\x94\xc0\xc0\xf2\x80\x08\x0c\xa6\x04\x06\x96\x07D`pD\xa0\xe5\x01Q\x18\x1e\x91hy@4\x86#"'
Receive: 38 1819.419914 1819.419695 49: seq: 14, identify_response offset=1520 data=b"\xc1d'B\x8e\x08j\n4\x16\xf5J\xfdM\xa6@\xf9D`\x1b\xfaYO\xe1\x8a\x89\xdc\xf4\x9d\xd3K-\xf3\xf5\xdb\x03\xfaYL\xc1"
Receive: 39 1819.420256 1819.420113 49: seq: 15, identify_response offset=1560 data=b"\xb6\x13E\x8a\xe9g9\x85\xcb'\xda@\xaf\x08\xf1\x19W\xff\xf8x\xf5s\xfa\xd7\xcf\xef\x7f\xc1\nb\xa1\xfe\x9d\xcd\xae\xaf\xbe\x00J\xd7"
Receive: 40 1819.420606 1819.420452 49: seq: 16, identify_response offset=1600 data=b'\x86\x8b%^\xfa\xe9\x9f\xd7d)!\x16\xca7\xb7\x97\xb77\xe9\xcd\x97\xeb\x9b_\xd2w\x977\xefq9\xc1\xe5\xf7\x9f>\xbd\xff\x9c\xbe'
Receive: 41 1819.420960 1819.420805 49: seq: 17, identify_response offset=1640 data=b'\xfbx\xfb\xf7\xf4\xfd\x8f\x7f\x83\xf5\xe0\x193\xfb\x01j\rU\r\xab\x86\x93\xce`\xf5\x10e@\x99.2\x9arj\xe4&\xe5\xb1\xc8\xaf'
Receive: 42 1819.421310 1819.421160 49: seq: 18, identify_response offset=1680 data=b'\x88F\x94\xbfk\xdd\xa7\xdc\x14\x95<\xa1\xd1A%\xfbZm\xd74\xda\xaaZJ+c@\x97\xa0\xda\x05t\x0b*X@\xd7\xa0*\x05'
Receive: 43 1819.421664 1819.421507 49: seq: 19, identify_response offset=1720 data=b't\x0f*\x8dr\x13\xe0\xee\x8d\x8f\xb8}\x7f\r\xef\xba\xbc\xfd\xf2Y=\x15\xc8PJ3\xbb\xf8uq\x16-~{\x1eE3\xa8\x1aU'
Receive: 44 1819.422010 1819.421861 49: seq: 1a, identify_response offset=1760 data=b'[-\x88\xa2H=-\x93\xf1b\xb9*\xd4\xe3\xfa\x92\xc7\x8b \x04\xcaB\x8d\xa59\xa1\xb5q\xa1\x165\'\xb4^\x854"Nh\xdd'
Receive: 45 1819.422354 1819.422205 49: seq: 1b, identify_response offset=1800 data=b'\xa0\x90\x83/\x8ci\x84\xb9\x0c\x9e\x08I\x98@\x9f\xdbA\xed\x98\x8aB\xbf\x80)o\xb8\xa3l\x94\x1aA\x97\xa5\xc8$\x16\x98 Z\x8c'
Receive: 46 1819.422705 1819.422551 49: seq: 1c, identify_response offset=1840 data=b'\xd8,+\xd1\xcb?\xb1C&\xd5\x1a\xaf\xb3m\xc9\x0b\xea^\\\xeaMS\x85\x15\xc4\xaf\xab\xacfu\xd33\x88\x05\x0c\xe3)\x83\x14\x80'
Receive: 47 1819.423062 1819.422909 49: seq: 1d, identify_response offset=1880 data=b'\xe2>S.\x9d=\x1c\x04\x8c\xc95K\xd6Bp\x81+)a\x01\xdc?\xf7\x98\xf40)\xf6p*\x14\xdfY\xcf\x84\xb4\x84PW\x84'
Receive: 48 1819.423412 1819.423258 49: seq: 1e, identify_response offset=1920 data=b'\xaaC\r,\x11\x14\xdd:\t\x91VU~\xa4\xb2G\xb8\x8e\xd7\xcc4\x0e,>0\xf0\x8a\x1a\x9e\xac\xcd:\t[\xbc\xeb\x9aNi\x8c'
Receive: 49 1819.423753 1819.423606 49: seq: 1f, identify_response offset=1960 data=b'\xd9\xe88\xa4i\xb2W\xba\xf3\x13\xa5\x89\xcct\xfe\\#\x92\xb25\xca\xdf\r\x94\xee\xa5*I\xb85\x00\xc3\xcb\xb2\x8aC\xaaG-\x08'
Receive: 50 1819.424101 1819.423949 49: seq: 10, identify_response offset=2000 data=b'\xb3\x89m1%\xf5\xd8;\xa5j\xee\xb9!\x82a\xeb\n\xb5\xd0m\xdbF\x97mmQ2s\xb4\xaf\xeb)KT\xe4Q\x05|c\xa4'
Receive: 51 1819.424453 1819.424299 49: seq: 11, identify_response offset=2040 data=b'\x9e\xa8\xf6f\x15;R\x8a\x1c\xec\xcf\xfa\x8b&Nbp\xf5\xd6u.\x9f\x1fD\xabO[z\xef\x18\xe5\xea\x1e\x0c\x96\xbd\xd7\xd9#*'
Receive: 52 1819.424797 1819.424650 49: seq: 12, identify_response offset=2080 data=b'\xe1\xda0\x96ZN\xd7Ppf{\x0e\xfa\x96CfeD\x03o\xbb\x16Rr\xb8\x12\x8a\xa7b(QU\x01\x19\x13Q\xa6c\xbc\xd2'
Receive: 53 1819.425140 1819.424995 49: seq: 13, identify_response offset=2120 data=b'j~\xcfQ"\x98\x83\xbe\x8cp\xc8\xbaB\xe9\xa6\x86\xc6\x8e\xcb5r\\\xe5\xe6\x0cF\xdd\xael\x1e(\xb9\xff\x00\n\x9d1z\x0e\xda'
Receive: 54 1819.425495 1819.425340 49: seq: 14, identify_response offset=2160 data=b'\x8er\x04\x98\xb2\xaa\x8d\x1a\xb2\xf7\x96\x92\\\xaa\xb6\xf5*\xd0\xe2\x96#\xe51\x95Y\xa19\x15b\x07y!\xdclm\x03tu\xd75'
Receive: 55 1819.425910 1819.425695 49: seq: 15, identify_response offset=2200 data=b'\x15 6\xc818\x139\x87u\x1e\xfc)E\xce\xa9\xbf\xfe\x99\xeb\xc7\xc0\xb3\x10\xc9\x02\xb6\x19\xea*V\x177\x16\xe0\x88+\xecA\x94'
Receive: 56 1819.426247 1819.426106 49: seq: 16, identify_response offset=2240 data=b'%\xa4T9\x87]\xbf)II\xa2\xc3\xb4\x9c\xf9\x06\x06\xe6a7`g$;E\x00B\x88j\xa8\xcc\x9a1\x0e`\xca\x8di<\xaa'
Receive: 57 1819.426587 1819.426443 49: seq: 17, identify_response offset=2280 data=b'\x16\x08\x1c\xa6,S\xb9\n\xbfY\x7f\xa3M\xb5o\x1a\xb6\xcb\xd4\xeb\xe8e\xd8\xf1\xb9\xf5U\t]\x02\x00\xaaV+5Ho\x15?\x10'
Receive: 58 1819.426957 1819.426808 49: seq: 18, identify_response offset=2320 data=b'\x13\xb2I\xc9\x95wT\xdf2\xa0\xda\x1e\xea;\x00\x15\xca}a\x8b\xdc[\x97n\x03t\x8ct\x19\x92^\xd9t\xca\xfc \xfb\x94,\x97'
Receive: 59 1819.427301 1819.427158 49: seq: 19, identify_response offset=2360 data=b'Z\x8e\xae\xf1GN\xa6\xa9K\xf0K\xf7p\x00\xfaF\xedn\xec\x83(\xd80\x9d\x14\xd3\x97\x81I\x87\xe8\x82}\x04\x87\x07\x01q\x8by'
Receive: 60 1819.427635 1819.427495 49: seq: 1a, identify_response offset=2400 data=b'\xec\x0e;\x84\xf2O\x94.\xeb\xe2\x94ah\xd1\xd7\xc3\xaa\xfa(c=\xa2\xfeTSP8\x93\xd8}\xa9\xc1\xe8I5r\xd8V\xfe\x1a'
Receive: 61 1819.427976 1819.427829 49: seq: 1b, identify_response offset=2440 data=b'v\xc0\x17\xab\xf6\xfb\x87\xcb\xab\x9f\xa9ok:\x97\xaa\xaa@\xae\x95Y\x87\xb1\x00\xab\xa8\x13\xa93\x8a\x8a\xe8\xc1>\xb0\xf6\xa5d.X'
Receive: 62 1819.428322 1819.428172 49: seq: 1c, identify_response offset=2480 data=b'0@\xa89\xea\x95b\xac\x81\x1c!\n\xd6q\xac"\x99\x9e$*\x98\xd1$\x89\x95\xdca\x92$+\x18G\xcf\xcf\xaa\xc0m\xc1\x1dp'
Receive: 63 1819.428666 1819.428516 49: seq: 1d, identify_response offset=2520 data=b"\xfa\x1c\xa5\xbb6~\xf5#\xd1/\xd69\x9f\xf4\x86\xe6\xa8%'\xbb<\xae\x16\xd7\x1d\x04S_P\x1d\xeb\x1f\xb7\x1d\x94m*\xac\x9d\xd8"
Receive: 64 1819.429010 1819.428860 49: seq: 1e, identify_response offset=2560 data=b'5\xf8[\n\xef\xa3\x13\x16\xacs\x8cA\xb6]4\xeaN\xd2\x91\xa7j\xffM\xe4\xbew\x8d02\xaf\x17\xc4\xd4\x8e~\x8f\xfa\xea\xa4J'
Receive: 65 1819.429349 1819.429204 49: seq: 1f, identify_response offset=2600 data=b"|WI\xadmG\x1fb\xa3nl\xaa\x17\xaa\xfe'\xae\x19\x05T\x05,\xb82\x9f\xf0\xb5\xea\xd8\xab\x16\xd3\xb7\xa8\xd6\x18z\x90\xba\xdb"
Receive: 66 1819.429704 1819.429543 49: seq: 10, identify_response offset=2640 data=b'\xe7\xe1\xc65\x9d%\xd8\x9e\xed!\xaf7\xaeg;:\xf9\xd0T\xe0z\x8f\xef\xf0[\xc2\xc0\x9c\xc0\xb5AS\xa3\x00\xae\xb2\xa39\xb1\x05'
Receive: 67 1819.430044 1819.429896 49: seq: 11, identify_response offset=2680 data=b'K3\xd3i\xf4@m\xcb\x91\x14\xe2\x1cA\xd1\xe0\x1cC\xd84\x1b\xd2<\x01.\xeb.\xd8w)\xd9\xca\x82\xff\x9fu\x0c\xcc\xdd4\xd3'
Receive: 68 1819.430382 1819.430236 49: seq: 12, identify_response offset=2720 data=b"\xbe\x870\xf4\xe1'\x9bo\xff\x13e\xc3)\xca\x16^\xc7V\xeb\x81!n\xc8s\xd51\xceQ\x7f\x01\x0e\xa4\xe3\x7f\xb4Xc\xbb\xc2\x05"
Receive: 69 1819.430717 1819.430574 49: seq: 13, identify_response offset=2760 data=b'\x03\xd3_=-\x98\xc8O\xa4\xbfK6\x81\x8f\xe1\xb5.|\x04\x84\x0bO5\x9c\x8e\xf4\xceo*z\n8\x0f\xa3q\x87\xe7\x8f\x14v'
Receive: 70 1819.431060 1819.430917 49: seq: 14, identify_response offset=2800 data=b'\xa9\x12\xf1\xaeW\xb9\xee:\xa0\xb4\\:+\x93C\xa5\x7f\xe4W2\xa6\xa5\xeb\xd9L\x1a:\xd4\x13\x17p\xeab\xe2s\xc7\x828\xe9\x86'
Receive: 71 1819.431414 1819.431254 49: seq: 15, identify_response offset=2840 data=b"\x06\n\x98$\x1d\xcc\xfaM\x9b\xe7\xf8\x01\xd8\xe0!'\x14\xf8\xad\x1bg\xd7yf\xfbH'?\xe3x>k\x13bLQY\x0e}\xd3"
Receive: 72 1819.431755 1819.431609 45: seq: 16, identify_response offset=2880 data=b'\x1c|\x87\x16\x83\xcb\xd7\xff\x01\x02J\xcc\xfb\xc5y\x10\x9c/\xe0\xda`\xbe\xdf\xf0U\x12\x17\x19\x9f=\xff\x07\x1d\xef\x00\xae'
Receive: 73 1819.432073 1819.431949 9: seq: 17, identify_response offset=2916 data=b''
Receive: 74 1819.436743 1819.436584 12: seq: 18, uptime high=0 clock=1462888618
Receive: 75 1819.488482 1819.488315 11: seq: 19, clock clock=1463509558
Receive: 76 1819.539227 1819.539066 11: seq: 1a, clock clock=1464118497
Receive: 77 1819.589915 1819.589711 11: seq: 1b, clock clock=1464726834
Receive: 78 1819.640465 1819.640327 11: seq: 1c, clock clock=1465333434
Receive: 79 1819.691060 1819.690921 11: seq: 1d, clock clock=1465940579
Receive: 80 1819.742675 1819.742506 11: seq: 1e, clock clock=1466559673
Receive: 81 1819.793232 1819.793105 11: seq: 1f, clock clock=1467166671
Receive: 82 1819.843758 1819.843623 11: seq: 10, clock clock=1467772910
Receive: 83 1819.844779 1819.844630 10: seq: 11, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 84 1819.845144 1819.845022 11: seq: 12, clock clock=1467789644
Receive: 85 1819.847544 1819.847286 12: seq: 13, shutdown clock=1467817073 static_string_id=oids already allocated
Transition to shutdown state: MCU 'mcu' shutdown: oids already allocated
Dumping 4 requests for client 547949651232
Received 1819.216502: b'{"id": 548149692640, "method": "info", "params": {"client_info": {"program": "Moonraker", "version": "v0.8.0-202-gdddd968"}}}'
Received 1819.221703: b'{"id": 548149692976, "method": "list_endpoints", "params": {}}'
Received 1819.473640: b'{"id": 548149692928, "method": "info", "params": {}}'
Received 1819.725860: b'{"id": 548149692784, "method": "info", "params": {}}'
Reactor garbage collection: (1819.436614267, 0.0, 0.0)
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-8-g187cc2f1'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sat Nov 18 21:24:55 2023 (1700371495.7 2949.8)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547723746848: New connection
webhooks client 547723746848: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Loaded MCU 'mcu' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/pi/klipper/klippy/mcu.py", line 749, in _connect
    config_params = self._send_get_config()
  File "/home/pi/klipper/klippy/mcu.py", line 735, in _send_get_config
    raise error("Can not update MCU '%s' config as it is shutdown" % (
mcu.error: Can not update MCU 'mcu' config as it is shutdown
Build file /home/pi/klipper/klippy/../.config(1425): Sat Nov 18 20:52:33 2023
========= Last MCU build config =========
# CONFIG_LOW_LEVEL_OPTIONS is not set
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
CONFIG_MACH_LPC176X=y
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="lpc176x"
CONFIG_MCU="lpc1769"
CONFIG_CLOCK_FREQ=120000000
CONFIG_USBSERIAL=y
CONFIG_FLASH_SIZE=0x80000
CONFIG_FLASH_BOOT_ADDRESS=0x0
CONFIG_RAM_START=0x10000000
CONFIG_RAM_SIZE=0x7fe0
CONFIG_STACK_SIZE=512
CONFIG_FLASH_APPLICATION_ADDRESS=0x4000
CONFIG_LPC_SELECT=y
# CONFIG_MACH_LPC1768 is not set
CONFIG_MACH_LPC1769=y
CONFIG_LPC_FLASH_START_4000=y
# CONFIG_LPC_FLASH_START_0000 is not set
CONFIG_LPC_USB=y
# CONFIG_LPC_SERIAL_UART0_P03_P02 is not set
CONFIG_USB=y
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER_CHIPID=y
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_WANT_GPIO_BITBANGING=y
CONFIG_WANT_DISPLAYS=y
CONFIG_WANT_SENSORS=y
CONFIG_WANT_LIS2DW=y
CONFIG_WANT_SOFTWARE_I2C=y
CONFIG_WANT_SOFTWARE_SPI=y
CONFIG_CANBUS_FREQUENCY=1000000
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_HAVE_CHIPID=y
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
CONFIG_HAVE_BOOTLOADER_REQUEST=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7835): Sat Nov 18 20:52:49 2023
Last MCU build version: v0.12.0-8-g187cc2f1
Last MCU build tools: gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2
Last MCU build config: ADC_MAX=4095 BUS_PINS_i2c0=P0.28,P0.27 BUS_PINS_i2c1=P0.1,P0.0 BUS_PINS_i2c1a=P0.20,P0.19 BUS_PINS_i2c2=P0.11,P0.10 BUS_PINS_ssp0=P0.17,P0.18,P0.15 BUS_PINS_ssp1=P0.8,P0.9,P0.7 CLOCK_FREQ=120000000 MCU=lpc1769 PWM_MAX=255 RESERVE_PINS_USB=P0.30,P0.29,P2.9 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Build file /home/pi/klipper/klippy/../out/klipper.elf(636516): Sat Nov 18 20:52:55 2023
Attempting MCU 'mcu' reset command
webhooks client 547723746848: Disconnected
Restarting printer
Start printer at Sat Nov 18 21:24:59 2023 (1700371499.4 2953.5)
===== Config file =====
[stepper_x]
step_pin = P2.2
dir_pin = P2.6
enable_pin = !P2.1
rotation_distance = 40
microsteps = 16
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_min = 0
position_max = 245
homing_speed = 150
homing_retract_dist = 0

[stepper_y]
step_pin = P0.19
dir_pin = !P0.20
enable_pin = !P2.8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = -8
position_min = -8
position_max = 210
homing_speed = 150
homing_retract_dist = 0

[stepper_z]
step_pin = P0.22
dir_pin = P2.11
enable_pin = !P0.21
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_max = 210
position_min = -5
homing_speed = 150

[stepper_z1]
step_pin = P1.15
dir_pin = P1.14
enable_pin = !P1.16
microsteps = 32
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop

[tmc2209 stepper_x]
uart_pin = P1.10
interpolate = True
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.29
driver_sgthrs = 110

[tmc2209 stepper_y]
uart_pin = P1.9
run_current = 0.800
stealthchop_threshold = 999999
diag_pin = P1.28
driver_sgthrs = 90

[tmc2209 stepper_z]
uart_pin = P1.8
run_current = 0.6
stealthchop_threshold = 999999

[tmc2209 stepper_z1]
uart_pin = P1.1
run_current = 0.6
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 120,120
speed = 200
z_hop = 5
z_hop_speed = 30

[screws_tilt_adjust]
screw1 = 110,100
screw1_name = Center
screw2 = 0,0
screw2_name = Front Left
screw3 = 110,0
screw3_name = Front Center
screw4 = 200,0
screw4_name = Front Right
screw5 = 200,100
screw5_name = Right Center
screw6 = 200,200
screw6_name = Rear Right
screw7 = 110,200
screw7_name = Rear Center
screw8 = 0,200
screw8_name = Rear Left
screw9 = 0,100
screw9_name = Left Center

[bltouch]
control_pin = P2.0
sensor_pin = P1.27
x_offset = 27
y_offset = -5
lift_speed = 60
stow_on_each_sample = False
probe_with_touch_mode = True
z_offset = 1.750

[bed_mesh]
speed = 200
horizontal_move_z = 5
mesh_min = 27,5
mesh_max = 240, 200
probe_count = 7,5
algorithm = bicubic

[z_tilt]
z_positions = -37,110
	295,110
points = 5,110
	215,110
speed = 450
retries = 10
retry_tolerance = 0.02

[extruder]
step_pin = P2.13
dir_pin = P0.11
enable_pin = !P2.12
max_extrude_only_distance = 200.0
max_extrude_cross_section = 5
microsteps = 16
rotation_distance = 7.9
nozzle_diameter = 0.4
filament_diameter = 1.750
heater_pin = P2.7
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = P0.24
min_temp = 10
max_temp = 290
control = pid
pid_kp = 34.418
pid_ki = 3.585
pid_kd = 82.604

[verify_heater extruder]
max_error = 240

[verify_heater heater_bed]
check_gain_time = 90

[tmc2209 extruder]
uart_pin = P1.4
run_current = 0.7
stealthchop_threshold = 999999

[gcode_arcs]

[firmware_retraction]
retract_speed = 40
unretract_speed = 40
retract_length = 0.5
unretract_extra_length = 0

[heater_bed]
heater_pin = P2.5
sensor_type = EPCOS 100K B57560G104F
sensor_pin = P0.25
min_temp = 10
max_temp = 130
control = pid
pid_kp = 61.226
pid_ki = 1.204
pid_kd = 778.330

[fan]
pin = P2.3
max_power = 0.7

[mcu]
serial = /dev/ttyACM0

[printer]
kinematics = cartesian
max_velocity = 500
max_accel = 3000
max_z_velocity = 10
max_z_accel = 200

[force_move]
enable_force_move = True

[board_pins]
aliases = 
	
	EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
	EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
	
	EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
	EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>

[input_shaper]
shaper_type_x = 2hump_ei
shaper_freq_x = 54.2
shaper_type_y = mzv
shaper_freq_y = 26.4

[gcode_macro G29]
gcode = 
	Z_TILT_ADJUST
	BED_MESH_CALIBRATE

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
	
	M104 S{EXTRUDER_TEMP}
	M140 S{BED_TEMP}
	
	SET_GCODE_OFFSET Z=0.0
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	
	G90
	G92 E0
	G1 E-1 F1800
	G92 E0
	G28
	G29
	LINE_PURGE

[gcode_macro PRINT_END]
gcode = 
	
	M140 S0
	M104 S0
	M106 S0
	
	G91
	G1 X-2 Y-2 E-3 F300
	
	G1 Z10 F3000
	G90
	
	M84

[filament_switch_sensor filament_sensor]
switch_pin = ^!P1.26

[pause_resume]

[exclude_object]

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	
	M106 S0
	
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable':True, 'call':params.MACRO|default("PAUSE")}}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% if params.LAYER is defined %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': True, 'layer':params.LAYER|int, 'call':params.MACRO|default("PAUSE")}}"
	{% else %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer':0, 'call':"PAUSE"}}"
	{% endif %}

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = {'enable':False, 'call':"PAUSE"}
variable_pause_at_layer = {'enable':False, 'layer':0, 'call':"PAUSE"}
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{'enable': False, 'call':"PAUSE"}}"
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{'enable': False, 'layer': 0, 'call':"PAUSE"}}"
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
	{% set dic = {'center'      : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left'  : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right' : {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'   : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right'  : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'      : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
	'x_only'      : {'x': tl.park.custom.x, 'y': 'none'          , 'dz': tl.park.custom.dz},
	'y_only'      : {'x': 'none'          , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
	'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
	'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}
	
	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% else %}
	
	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode = 
	
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
	
	
	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}
	
	
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
	
	
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}
	
	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}
	
	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}
	
	
	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
	
	{% if cross_section < 5 %}
	
	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
	
	{% else %}
	
	{% if verbose_enable == True %}
	
	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}
	
	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}
	
	{% if purge_y_origin > 0 %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% else %}
	
	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }
	
	{% endif %}
	
	SAVE_GCODE_STATE NAME=Prepurge_State
	
	{% if purge_y_origin > 0 %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% else %}
	
	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}
	
	{% endif %}
	
	RESTORE_GCODE_STATE NAME=Prepurge_State
	
	{% endif %}

[gcode_macro SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode = 
	
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	
	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}
	
	
	{% if verbose_enable == True %}
	
	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }
	
	{% endif %}
	
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
variable_smart_park_height = 10
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="printer", state="off"
	)}

[gcode_macro POWER_OFF_LIGHT]
gcode = 
	{action_call_remote_method(
	"set_device_power", device="light", state="off"
	)}

[delayed_gcode delayed_printer_off2]
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	M117 shutting down
	POWER_OFF_PRINTER
	POWER_OFF_LIGHT
	{% endif %}

[idle_timeout]
gcode = 
	{% if printer.pause_resume.is_paused %}
	M117 Bypassed Timeout
	{% else %}
	M117 shutting down heaters
	M84
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off2 DURATION=300
	{% endif %}
timeout = 300

[bed_mesh default]
version = 1
points = 
	0.000637, 0.000637, -0.065613, -0.074363, -0.078113
	-0.008113, 0.038137, 0.025637, -0.006863, 0.018137
	0.023137, -0.093113, -0.153113, -0.101863, -0.055613
x_count = 5
y_count = 3
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 0.0
max_x = 215.0
min_y = 0.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting serial connect
webhooks client 547724119632: New connection
webhooks client 547724119632: Client info {'program': 'Moonraker', 'version': 'v0.8.0-202-gdddd968'}
Loaded MCU 'mcu' 112 commands (v0.11.0-311-g9e765dae / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Config error
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 709, in _send_config
    self._serial.send(c)
  File "/home/pi/klipper/klippy/serialhdl.py", line 256, in send
    cmd = self.msgparser.create_command(msg)
  File "/home/pi/klipper/klippy/msgproto.py", line 350, in create_command
    cmd = mp.encode_by_name(**argparts)
  File "/home/pi/klipper/klippy/msgproto.py", line 181, in encode_by_name
    t.encode(out, params[name])
  File "/home/pi/klipper/klippy/msgproto.py", line 108, in encode
    raise enumeration_error(self.enum_name, v)
msgproto.enumeration_error: Unknown value 'P1.10' in enumeration 'pin'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/pi/klipper/klippy/mcu.py", line 755, in _connect
    self._send_config(None)
  File "/home/pi/klipper/klippy/mcu.py", line 720, in _send_config
    raise self._printer.config_error(
configparser.Error: Pin 'P1.10' is not a valid pin name on mcu 'mcu'