--------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-26 22:06:03,893 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-26 22:06:04,155 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-26 22:06:04,156 [config.py:__init__()] - Config path location: /home/pi/KlipperScreen/ks_includes/defaults.conf 2023-03-26 22:06:04,178 [config.py:__init__()] - Configuration validated succesfuly 2023-03-26 22:06:04,179 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-26 22:06:04,296 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-26 22:06:04,297 [config.py:install_language()] - Using system lang 2023-03-26 22:06:04,298 [config.py:install_language()] - Using lang en 2023-03-26 22:06:04,308 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-26 22:06:04,310 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-26 22:06:05,265 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-26 22:06:05,274 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-26 22:06:05,290 [screen.py:initial_connection()] - Default printer: None 2023-03-26 22:06:05,290 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-26 22:06:05,292 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-26 22:06:05,292 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-26 22:06:05,373 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:06:05,406 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:06:05,420 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-26 22:06:05,421 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-26 22:06:05,433 [_logging.py:info()] - Websocket connected 2023-03-26 22:06:05,433 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-26 22:06:05,464 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:06:05,496 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:06:05,511 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-26 22:06:05,575 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-26 22:06:05,578 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-26 22:06:05,578 [printer.py:reinit()] - # Extruders: 1 2023-03-26 22:06:05,578 [printer.py:reinit()] - # Temperature devices: 2 2023-03-26 22:06:05,578 [printer.py:reinit()] - # Fans: 2 2023-03-26 22:06:05,579 [printer.py:reinit()] - # Output pins: 0 2023-03-26 22:06:05,579 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-26 22:06:05,874 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-26 22:06:05,891 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-26 22:06:05,891 [printer.py:change_state()] - Adding callback for state: ready 2023-03-26 22:06:05,944 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:06:05,966 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:06:05,983 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:06:05,984 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:06:05,985 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-26 22:06:05,985 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-26 22:06:05,987 [screen.py:init_printer()] - Printer initialized 2023-03-26 22:06:06,099 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-26 22:06:06,099 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-26 22:06:06,145 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-26 22:06:06,229 [main_menu.py:add_device()] - Adding device: extruder 2023-03-26 22:06:06,238 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-26 22:06:06,248 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-26 22:06:06,257 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-26 22:06:07,957 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:06:08,001 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:06:08,028 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:06:08,029 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:08:00,563 [screen.py:_load_panel()] - Loading panel: gcode_macros 2023-03-26 22:08:00,564 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/gcode_macros.py 2023-03-26 22:08:00,626 [screen.py:attach_panel()] - Current panel hierarchy: main_panel > gcode_macros 2023-03-26 22:09:40,694 [keyboard.py:__init__()] - Keyboard en 2023-03-26 22:09:52,773 [screen_panel.py:switch_config_option()] - [displayed_macros Printer] G29 toggled False 2023-03-26 22:09:52,776 [config.py:save_user_config_options()] - Creating a new config file in /home/pi/printer_data/config/KlipperScreen.conf 2023-03-26 22:09:54,912 [screen_panel.py:switch_config_option()] - [displayed_macros Printer] G29 toggled True 2023-03-26 22:09:54,916 [config.py:save_user_config_options()] - Creating a new config file in /home/pi/printer_data/config/KlipperScreen.conf 2023-03-26 22:10:01,737 [screen_panel.py:switch_config_option()] - [displayed_macros Printer] G29 toggled False 2023-03-26 22:10:01,741 [config.py:save_user_config_options()] - Creating a new config file in /home/pi/printer_data/config/KlipperScreen.conf 2023-03-26 22:10:02,444 [screen_panel.py:switch_config_option()] - [displayed_macros Printer] G27 toggled False 2023-03-26 22:10:02,447 [config.py:save_user_config_options()] - Creating a new config file in /home/pi/printer_data/config/KlipperScreen.conf 2023-03-26 22:10:02,875 [screen_panel.py:switch_config_option()] - [displayed_macros Printer] M600 toggled False 2023-03-26 22:10:02,879 [config.py:save_user_config_options()] - Creating a new config file in /home/pi/printer_data/config/KlipperScreen.conf 2023-03-26 22:10:05,836 [screen_panel.py:switch_config_option()] - [displayed_macros Printer] M702 toggled False 2023-03-26 22:10:05,841 [config.py:save_user_config_options()] - Creating a new config file in /home/pi/printer_data/config/KlipperScreen.conf 2023-03-26 22:10:07,663 [screen_panel.py:unload_menu()] - self.menu: ['macros_menu', 'options_menu'] 2023-03-26 22:10:18,131 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-26 22:10:18,169 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-26 22:10:22,393 [screen.py:attach_panel()] - Current panel hierarchy: main_panel > gcode_macros 2023-03-26 22:10:25,902 [screen_panel.py:switch_config_option()] - [displayed_macros Printer] PAUSE_PARK toggled False 2023-03-26 22:10:25,906 [config.py:save_user_config_options()] - Creating a new config file in /home/pi/printer_data/config/KlipperScreen.conf 2023-03-26 22:10:27,422 [screen_panel.py:unload_menu()] - self.menu: ['macros_menu', 'options_menu'] 2023-03-26 22:10:41,110 [screen.py:_menu_go_back()] - #### Menu go home 2023-03-26 22:10:41,142 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-26 22:10:56,310 [KlippyWebsocket.py:emergency_stop()] - Sending printer.emergency_stop 2023-03-26 22:10:56,566 [printer.py:change_state()] - Changing state from 'ready' to 'shutdown' 2023-03-26 22:10:56,566 [printer.py:change_state()] - Adding callback for state: shutdown 2023-03-26 22:10:56,579 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:11:04,160 [KlippyWebsocket.py:restart_firmware()] - Sending printer.firmware_restart 2023-03-26 22:11:04,194 [printer.py:change_state()] - Changing state from 'shutdown' to 'disconnected' 2023-03-26 22:11:04,194 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-26 22:11:04,195 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-26 22:11:04,206 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:11:04,230 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:11:04,251 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:11:04,252 [screen.py:init_printer()] - Klipper not connected 2023-03-26 22:11:07,947 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:11:07,975 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:11:08,001 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-26 22:11:08,035 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-26 22:11:08,039 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-26 22:11:08,040 [printer.py:reinit()] - # Extruders: 1 2023-03-26 22:11:08,040 [printer.py:reinit()] - # Temperature devices: 2 2023-03-26 22:11:08,040 [printer.py:reinit()] - # Fans: 2 2023-03-26 22:11:08,040 [printer.py:reinit()] - # Output pins: 0 2023-03-26 22:11:08,042 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-26 22:11:08,314 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-26 22:11:08,316 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-26 22:11:08,316 [printer.py:change_state()] - Adding callback for state: ready 2023-03-26 22:11:08,342 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:11:08,361 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:11:08,377 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:11:08,378 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:11:08,379 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-26 22:11:08,380 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-26 22:11:08,381 [screen.py:init_printer()] - Printer initialized 2023-03-26 22:11:08,386 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-26 22:11:08,476 [main_menu.py:add_device()] - Adding device: extruder 2023-03-26 22:11:08,485 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-26 22:11:08,495 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-26 22:11:08,505 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-26 22:11:10,974 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:11:11,018 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:11:11,041 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:11:11,042 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:11:11,933 [KlippyWebsocket.py:emergency_stop()] - Sending printer.emergency_stop 2023-03-26 22:11:12,044 [printer.py:change_state()] - Changing state from 'ready' to 'shutdown' 2023-03-26 22:11:12,044 [printer.py:change_state()] - Adding callback for state: shutdown 2023-03-26 22:11:12,070 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:11:28,341 [KlippyWebsocket.py:restart()] - Sending printer.restart 2023-03-26 22:11:28,373 [printer.py:change_state()] - Changing state from 'shutdown' to 'disconnected' 2023-03-26 22:11:28,374 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-26 22:11:28,375 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-26 22:11:28,388 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:11:28,414 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:11:28,435 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:11:28,435 [screen.py:init_printer()] - Klipper not connected 2023-03-26 22:11:31,940 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:11:31,960 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:11:31,980 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-26 22:11:32,063 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-26 22:11:32,066 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-26 22:11:32,067 [printer.py:reinit()] - # Extruders: 1 2023-03-26 22:11:32,067 [printer.py:reinit()] - # Temperature devices: 2 2023-03-26 22:11:32,067 [printer.py:reinit()] - # Fans: 2 2023-03-26 22:11:32,068 [printer.py:reinit()] - # Output pins: 0 2023-03-26 22:11:32,071 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-26 22:11:32,347 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-26 22:11:32,349 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-03-26 22:11:32,350 [printer.py:change_state()] - Adding callback for state: error 2023-03-26 22:11:32,373 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:11:32,393 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:11:32,408 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:11:32,409 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:11:32,409 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-26 22:11:32,410 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-26 22:11:32,411 [screen.py:init_printer()] - Printer initialized 2023-03-26 22:11:32,421 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:11:34,969 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:11:35,003 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:11:35,032 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:11:35,034 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:11:38,450 [KlippyWebsocket.py:restart_firmware()] - Sending printer.firmware_restart 2023-03-26 22:11:38,493 [printer.py:change_state()] - Changing state from 'error' to 'disconnected' 2023-03-26 22:11:38,494 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-26 22:11:38,495 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-26 22:11:38,509 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:11:38,535 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:11:38,555 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:11:38,555 [screen.py:init_printer()] - Klipper not connected 2023-03-26 22:11:41,951 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:11:41,980 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:11:42,006 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-26 22:11:42,036 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-26 22:11:42,040 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-26 22:11:42,040 [printer.py:reinit()] - # Extruders: 1 2023-03-26 22:11:42,040 [printer.py:reinit()] - # Temperature devices: 2 2023-03-26 22:11:42,040 [printer.py:reinit()] - # Fans: 2 2023-03-26 22:11:42,041 [printer.py:reinit()] - # Output pins: 0 2023-03-26 22:11:42,042 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-26 22:11:42,321 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-26 22:11:42,325 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-26 22:11:42,331 [printer.py:change_state()] - Adding callback for state: ready 2023-03-26 22:11:42,395 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:11:42,416 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:11:42,430 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:11:42,431 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:11:42,432 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-26 22:11:42,432 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-26 22:11:42,433 [screen.py:init_printer()] - Printer initialized 2023-03-26 22:11:42,439 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-26 22:11:42,528 [main_menu.py:add_device()] - Adding device: extruder 2023-03-26 22:11:42,541 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-26 22:11:42,550 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-26 22:11:42,560 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-26 22:11:44,962 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:11:44,993 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:11:45,016 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:11:45,018 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:11:52,851 [KlippyWebsocket.py:emergency_stop()] - Sending printer.emergency_stop 2023-03-26 22:11:53,064 [printer.py:change_state()] - Changing state from 'ready' to 'shutdown' 2023-03-26 22:11:53,064 [printer.py:change_state()] - Adding callback for state: shutdown 2023-03-26 22:11:53,077 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:11:55,091 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-26 22:11:55,091 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-26 22:11:55,096 [screen.py:_load_panel()] - Loading panel: menu 2023-03-26 22:11:55,097 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/menu.py 2023-03-26 22:11:55,110 [menu.py:initialize()] - X > power 2023-03-26 22:11:55,111 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-26 22:11:55,228 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-26 22:11:57,322 [screen.py:_load_panel()] - Loading panel: system 2023-03-26 22:11:57,323 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/system.py 2023-03-26 22:11:57,429 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-03-26 22:11:57,441 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-03-26 22:11:57,454 [system.py:_needs_update()] - klipper v0.11.0-143 -> v0.11.0-148 2023-03-26 22:11:57,457 [system.py:_already_updated()] - mainsail v2.5.0 2023-03-26 22:11:57,460 [system.py:_already_updated()] - mainsail-config v1.0.0-9 2023-03-26 22:11:57,471 [system.py:_needs_update()] - moonraker v0.8.0-29 -> v0.8.0-30 2023-03-26 22:11:57,483 [system.py:_already_updated()] - sonar v0.1.2-0 2023-03-26 22:11:57,499 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-03-26 22:11:57,533 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-03-26 22:11:57,534 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-03-26 22:11:57,540 [system.py:_needs_update()] - klipper v0.11.0-143 -> v0.11.0-148 2023-03-26 22:11:57,543 [system.py:_already_updated()] - mainsail v2.5.0 2023-03-26 22:11:57,546 [system.py:_already_updated()] - mainsail-config v1.0.0-9 2023-03-26 22:11:57,550 [system.py:_needs_update()] - moonraker v0.8.0-29 -> v0.8.0-30 2023-03-26 22:11:57,553 [system.py:_already_updated()] - sonar v0.1.2-0 2023-03-26 22:12:07,380 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-26 22:12:07,400 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-26 22:12:09,022 [screen.py:_load_panel()] - Loading panel: network 2023-03-26 22:12:09,023 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/network.py 2023-03-26 22:12:09,087 [network.py:__init__()] - Found wireless interfaces: ['wlan0'] 2023-03-26 22:12:09,087 [network.py:__init__()] - Using wpa_cli 2023-03-26 22:12:09,126 [wifi.py:run()] - Setting up wifi event loop 2023-03-26 22:12:09,154 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > network 2023-03-26 22:12:11,220 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-26 22:12:11,237 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-26 22:12:13,251 [network.py:connected_callback()] - Now connected to a new network 2023-03-26 22:12:18,682 [printer.py:change_state()] - Changing state from 'shutdown' to 'disconnected' 2023-03-26 22:12:18,682 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-26 22:12:18,684 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-26 22:12:18,696 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:12:18,726 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:12:18,752 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:12:18,752 [screen.py:init_printer()] - Klipper not connected 2023-03-26 22:12:21,948 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:12:21,978 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:12:22,010 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-26 22:12:22,044 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-26 22:12:22,048 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-26 22:12:22,048 [printer.py:reinit()] - # Extruders: 1 2023-03-26 22:12:22,049 [printer.py:reinit()] - # Temperature devices: 2 2023-03-26 22:12:22,049 [printer.py:reinit()] - # Fans: 2 2023-03-26 22:12:22,049 [printer.py:reinit()] - # Output pins: 0 2023-03-26 22:12:22,053 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-26 22:12:22,312 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-26 22:12:22,317 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-26 22:12:22,317 [printer.py:change_state()] - Adding callback for state: startup 2023-03-26 22:12:22,383 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:12:22,423 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:12:22,442 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:12:22,443 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:12:22,444 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-26 22:12:22,444 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-26 22:12:22,445 [screen.py:init_printer()] - Printer initialized 2023-03-26 22:12:22,537 [printer.py:change_state()] - Changing state from 'startup' to 'ready' 2023-03-26 22:12:22,537 [printer.py:change_state()] - Adding callback for state: ready 2023-03-26 22:12:22,542 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-26 22:12:22,629 [main_menu.py:add_device()] - Adding device: extruder 2023-03-26 22:12:22,638 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-26 22:12:22,647 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-26 22:12:22,657 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-26 22:12:24,966 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:12:25,000 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:12:25,020 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:12:25,021 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:12:45,512 [KlippyWebsocket.py:emergency_stop()] - Sending printer.emergency_stop 2023-03-26 22:12:45,625 [printer.py:change_state()] - Changing state from 'ready' to 'shutdown' 2023-03-26 22:12:45,626 [printer.py:change_state()] - Adding callback for state: shutdown 2023-03-26 22:12:45,645 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:13:45,852 [printer.py:change_state()] - Changing state from 'shutdown' to 'disconnected' 2023-03-26 22:13:45,852 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-26 22:13:45,855 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-26 22:13:45,869 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:13:45,900 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:13:45,925 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:13:45,926 [screen.py:init_printer()] - Klipper not connected 2023-03-26 22:13:48,953 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:13:48,978 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:13:49,002 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-26 22:13:49,276 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-26 22:13:49,282 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-26 22:13:49,282 [printer.py:reinit()] - # Extruders: 1 2023-03-26 22:13:49,283 [printer.py:reinit()] - # Temperature devices: 2 2023-03-26 22:13:49,283 [printer.py:reinit()] - # Fans: 2 2023-03-26 22:13:49,283 [printer.py:reinit()] - # Output pins: 0 2023-03-26 22:13:49,285 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-26 22:13:49,535 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-26 22:13:49,537 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-03-26 22:13:49,537 [printer.py:change_state()] - Adding callback for state: error 2023-03-26 22:13:49,571 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:13:49,587 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:13:49,603 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:13:49,604 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:13:49,604 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-26 22:13:49,605 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-26 22:13:49,607 [screen.py:init_printer()] - Printer initialized 2023-03-26 22:13:49,616 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:13:51,969 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:13:52,004 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:13:52,027 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:13:52,028 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:13:52,311 [printer.py:change_state()] - Changing state from 'error' to 'disconnected' 2023-03-26 22:13:52,311 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-26 22:13:52,314 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-26 22:13:52,327 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:13:52,357 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:13:52,383 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:13:52,384 [screen.py:init_printer()] - Klipper not connected 2023-03-26 22:13:55,947 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:13:55,969 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:13:55,995 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-26 22:13:56,263 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-26 22:13:56,268 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-26 22:13:56,269 [printer.py:reinit()] - # Extruders: 1 2023-03-26 22:13:56,269 [printer.py:reinit()] - # Temperature devices: 2 2023-03-26 22:13:56,270 [printer.py:reinit()] - # Fans: 2 2023-03-26 22:13:56,270 [printer.py:reinit()] - # Output pins: 0 2023-03-26 22:13:56,271 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-26 22:13:56,553 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-26 22:13:56,556 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-03-26 22:13:56,556 [printer.py:change_state()] - Adding callback for state: error 2023-03-26 22:13:56,616 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:13:56,636 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:13:56,656 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:13:56,657 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:13:56,658 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-26 22:13:56,658 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-26 22:13:56,660 [screen.py:init_printer()] - Printer initialized 2023-03-26 22:13:56,674 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:13:58,975 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:13:59,001 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:13:59,030 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:13:59,031 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:14:00,710 [KlippyWebsocket.py:restart()] - Sending printer.restart 2023-03-26 22:14:00,739 [printer.py:change_state()] - Changing state from 'error' to 'disconnected' 2023-03-26 22:14:00,740 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-26 22:14:00,742 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-26 22:14:00,753 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:14:00,779 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:14:00,807 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:14:00,807 [screen.py:init_printer()] - Klipper not connected 2023-03-26 22:14:01,171 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-26 22:14:03,225 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-26 22:14:03,953 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:14:03,980 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:14:04,001 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-26 22:14:04,155 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-26 22:14:04,159 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-26 22:14:04,160 [printer.py:reinit()] - # Extruders: 1 2023-03-26 22:14:04,160 [printer.py:reinit()] - # Temperature devices: 2 2023-03-26 22:14:04,160 [printer.py:reinit()] - # Fans: 2 2023-03-26 22:14:04,160 [printer.py:reinit()] - # Output pins: 0 2023-03-26 22:14:04,162 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-26 22:14:04,454 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-26 22:14:04,465 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-03-26 22:14:04,466 [printer.py:change_state()] - Adding callback for state: error 2023-03-26 22:14:04,510 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:14:04,526 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:14:04,545 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:14:04,546 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:14:04,547 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-26 22:14:04,547 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-26 22:14:04,548 [screen.py:init_printer()] - Printer initialized 2023-03-26 22:14:04,559 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:14:06,969 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:14:07,002 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:14:07,025 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:14:07,026 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:14:07,035 [printer.py:change_state()] - Changing state from 'error' to 'disconnected' 2023-03-26 22:14:07,035 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-26 22:14:07,036 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-26 22:14:07,043 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-26 22:14:07,060 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:14:07,074 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:14:07,075 [screen.py:init_printer()] - Klipper not connected 2023-03-26 22:14:09,948 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-26 22:14:09,976 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-26 22:14:10,000 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-26 22:14:10,036 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-26 22:14:10,042 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-26 22:14:10,043 [printer.py:reinit()] - # Extruders: 1 2023-03-26 22:14:10,043 [printer.py:reinit()] - # Temperature devices: 2 2023-03-26 22:14:10,044 [printer.py:reinit()] - # Fans: 2 2023-03-26 22:14:10,044 [printer.py:reinit()] - # Output pins: 0 2023-03-26 22:14:10,045 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-26 22:14:10,315 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-26 22:14:10,317 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-26 22:14:10,317 [printer.py:change_state()] - Adding callback for state: startup 2023-03-26 22:14:10,344 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:14:10,359 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:14:10,375 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:14:10,376 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:14:10,376 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-26 22:14:10,377 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-26 22:14:10,378 [screen.py:init_printer()] - Printer initialized 2023-03-26 22:14:11,303 [printer.py:change_state()] - Changing state from 'startup' to 'ready' 2023-03-26 22:14:11,304 [printer.py:change_state()] - Adding callback for state: ready 2023-03-26 22:14:11,311 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-26 22:14:11,422 [main_menu.py:add_device()] - Adding device: extruder 2023-03-26 22:14:11,431 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-26 22:14:11,440 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-26 22:14:11,449 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-26 22:14:12,967 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-26 22:14:12,996 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-26 22:14:13,017 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-26 22:14:13,018 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-26 22:22:24,528 [files.py:_callback()] - Error in getting metadata for CE3S1PRO_CamMount.gcode.filepart. Retrying in 6 seconds 2023-03-26 22:22:42,440 [screen.py:_go_to_submenu()] - #### Go to submenu config 2023-03-26 22:22:42,440 [screen.py:_go_to_submenu()] - #### Menu __main 2023-03-26 22:22:42,453 [menu.py:initialize()] - X > config bedlevel 2023-03-26 22:22:42,465 [menu.py:initialize()] - X > config retraction 2023-03-26 22:22:42,474 [menu.py:initialize()] - X > config input_shaper 2023-03-26 22:22:42,604 [screen.py:attach_panel()] - Current panel hierarchy: main_panel > config 2023-03-26 22:22:47,480 [screen.py:_menu_go_back()] - #### Menu go home 2023-03-26 22:22:47,506 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-26 22:22:49,737 [screen.py:attach_panel()] - Current panel hierarchy: main_panel > gcode_macros 2023-03-26 22:23:00,690 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-26 22:23:00,725 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-26 22:23:04,473 [screen.py:_load_panel()] - Loading panel: print 2023-03-26 22:23:04,474 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/print.py 2023-03-26 22:23:04,530 [print.py:__init__()] - 24h time is True 2023-03-26 22:23:04,568 [screen.py:attach_panel()] - Current panel hierarchy: main_panel > print 2023-03-26 22:23:04,570 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-26 22:23:05,048 [print.py:_callback()] - newfiles: ['CE3S1PRO_CamMount.gcode'] 2023-03-26 22:23:05,075 [print.py:_callback()] - deletedfiles: [] 2023-03-26 22:23:05,076 [print.py:_callback()] - updatefiles: [] 2023-03-26 22:23:05,076 [files.py:_callback()] - Error in getting metadata for CE3S1PRO_CamMount.gcode. Retrying in 6 seconds 2023-03-26 22:23:09,750 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-26 22:23:12,119 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-26 22:23:12,120 [print.py:confirm_print_response()] - Starting print: CE3S1PRO_CamMount.gcode 2023-03-26 22:23:12,120 [KlippyWebsocket.py:print_start()] - Sending printer.print.start 2023-03-26 22:23:12,344 [printer.py:change_state()] - Changing state from 'ready' to 'printing' 2023-03-26 22:23:12,344 [printer.py:change_state()] - Adding callback for state: printing 2023-03-26 22:23:12,395 [screen.py:_load_panel()] - Loading panel: job_status 2023-03-26 22:23:12,395 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/job_status.py 2023-03-26 22:23:12,656 [screen.py:attach_panel()] - Current panel hierarchy: job_status 2023-03-26 22:23:12,657 [job_status.py:set_state()] - Changing job_status state from 'standby' to 'printing' 2023-03-26 22:23:12,676 [job_status.py:activate()] - Changing filename: 'None' to 'CE3S1PRO_CamMount.gcode' 2023-03-26 22:23:12,678 [job_status.py:update_file_metadata()] - Cannot find file metadata. Listening for updated metadata 2023-03-26 22:23:12,678 [job_status.py:show_file_thumbnail()] - CE3S1PRO_CamMount.gcode 2023-03-26 22:23:12,678 [job_status.py:show_file_thumbnail()] - no pixbuf 2023-03-26 22:23:44,688 [screen.py:_load_panel()] - Loading panel: fine_tune 2023-03-26 22:23:44,689 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/fine_tune.py 2023-03-26 22:23:44,801 [screen.py:attach_panel()] - Current panel hierarchy: job_status > fine_tune 2023-03-26 22:23:49,691 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-26 22:23:49,732 [screen.py:attach_panel()] - Current panel hierarchy: job_status 2023-03-26 22:23:51,982 [screen.py:attach_panel()] - Current panel hierarchy: job_status > gcode_macros 2023-03-26 22:23:54,741 [screen.py:_menu_go_back()] - #### Menu go home 2023-03-26 22:23:54,786 [screen.py:attach_panel()] - Current panel hierarchy: job_status 2023-03-26 23:24:34,925 [screen.py:show_screensaver()] - Showing Screensaver 2023-03-26 23:52:42,560 [job_status.py:set_state()] - Changing job_status state from 'printing' to 'complete' 2023-03-26 23:52:42,563 [screen.py:close_screensaver()] - Closing Screensaver 2023-03-26 23:52:42,595 [screen.py:wake_screen()] - Screen wake up 2023-03-26 23:52:45,058 [printer.py:change_state()] - Changing state from 'printing' to 'ready' 2023-03-26 23:52:45,059 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 00:52:43,925 [screen.py:show_screensaver()] - Showing Screensaver 2023-03-27 07:18:26,449 [printer.py:change_state()] - Changing state from 'ready' to 'shutdown' 2023-03-27 07:18:26,450 [printer.py:change_state()] - Adding callback for state: shutdown 2023-03-27 07:18:26,455 [screen.py:close_screensaver()] - Closing Screensaver 2023-03-27 07:18:26,501 [screen.py:wake_screen()] - Screen wake up 2023-03-27 07:18:26,945 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 07:32:39,651 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-27 07:32:39,652 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-27 07:32:39,672 [menu.py:initialize()] - X > power 2023-03-27 07:32:39,673 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-27 07:32:39,773 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-27 07:33:15,852 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-03-27 07:33:15,860 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-03-27 07:33:15,869 [system.py:_needs_update()] - klipper v0.11.0-143 -> v0.11.0-148 2023-03-27 07:33:15,872 [system.py:_already_updated()] - mainsail v2.5.0 2023-03-27 07:33:15,875 [system.py:_already_updated()] - mainsail-config v1.0.0-9 2023-03-27 07:33:15,883 [system.py:_needs_update()] - moonraker v0.8.0-29 -> v0.8.0-30 2023-03-27 07:33:15,892 [system.py:_already_updated()] - sonar v0.1.2-0 2023-03-27 07:33:15,903 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-03-27 07:33:15,917 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-03-27 07:33:15,918 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-03-27 07:33:15,921 [system.py:_needs_update()] - klipper v0.11.0-143 -> v0.11.0-148 2023-03-27 07:33:15,923 [system.py:_already_updated()] - mainsail v2.5.0 2023-03-27 07:33:15,925 [system.py:_already_updated()] - mainsail-config v1.0.0-9 2023-03-27 07:33:15,927 [system.py:_needs_update()] - moonraker v0.8.0-29 -> v0.8.0-30 2023-03-27 07:33:15,929 [system.py:_already_updated()] - sonar v0.1.2-0 2023-03-27 07:38:45,551 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 07:40:23,255 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 07:40:23,578 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 07:40:27,380 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 07:41:31,542 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 07:41:31,686 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 07:41:57,366 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 07:41:59,331 [KlippyGtk.py:remove_dialog()] - Removing Dialog --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-27 07:17:35,328 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-27 07:17:35,672 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-27 07:17:35,674 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-27 07:17:35,704 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-27 07:17:35,707 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-27 07:17:35,709 [config.py:__init__()] - Configuration validated succesfuly 2023-03-27 07:17:35,711 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-27 07:17:35,859 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-27 07:17:35,860 [config.py:install_language()] - Using system lang 2023-03-27 07:17:35,861 [config.py:install_language()] - Using lang en 2023-03-27 07:17:35,871 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-27 07:17:35,873 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-27 07:44:47,770 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-27 07:44:47,781 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-27 07:44:47,798 [screen.py:initial_connection()] - Default printer: None 2023-03-27 07:44:47,798 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-27 07:44:47,799 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-27 07:44:47,799 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-27 07:44:47,878 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 07:44:47,913 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 07:44:47,930 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-27 07:44:47,931 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-27 07:44:47,944 [_logging.py:info()] - Websocket connected 2023-03-27 07:44:47,946 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-27 07:44:47,979 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 07:44:48,018 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 07:44:48,041 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 07:44:48,100 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 07:44:48,104 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 07:44:48,105 [printer.py:reinit()] - # Extruders: 1 2023-03-27 07:44:48,105 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 07:44:48,105 [printer.py:reinit()] - # Fans: 2 2023-03-27 07:44:48,106 [printer.py:reinit()] - # Output pins: 0 2023-03-27 07:44:48,106 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 07:44:48,363 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 07:44:48,366 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 07:44:48,366 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 07:44:48,409 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 07:44:48,435 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 07:44:48,452 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 07:44:48,453 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 07:44:48,454 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 07:44:48,454 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 07:44:48,455 [screen.py:init_printer()] - Printer initialized 2023-03-27 07:44:48,561 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-27 07:44:48,561 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-27 07:44:48,577 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 07:44:48,679 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 07:44:48,690 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 07:44:48,702 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 07:44:48,713 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 07:44:51,202 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 07:44:51,230 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 07:44:51,247 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 07:44:51,249 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 07:48:54,885 [printer.py:change_state()] - Changing state from 'ready' to 'shutdown' 2023-03-27 07:48:54,885 [printer.py:change_state()] - Adding callback for state: shutdown 2023-03-27 07:48:54,899 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-27 07:48:59,648 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-27 07:48:59,969 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-27 07:48:59,974 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-27 07:49:00,000 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-27 07:49:00,002 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-27 07:49:00,005 [config.py:__init__()] - Configuration validated succesfuly 2023-03-27 07:49:00,008 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-27 07:49:00,155 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-27 07:49:00,157 [config.py:install_language()] - Using system lang 2023-03-27 07:49:00,158 [config.py:install_language()] - Using lang en 2023-03-27 07:49:00,172 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-27 07:49:00,174 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-27 07:49:01,327 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-27 07:49:01,341 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-27 07:49:01,361 [screen.py:initial_connection()] - Default printer: None 2023-03-27 07:49:01,362 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-27 07:49:01,363 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-27 07:49:01,363 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-27 11:30:19,485 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 11:30:19,532 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 11:30:19,553 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-27 11:30:19,554 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-27 11:30:19,569 [_logging.py:info()] - Websocket connected 2023-03-27 11:30:19,569 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-27 11:30:19,604 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 11:30:19,637 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 11:30:19,655 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 11:30:19,721 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 11:30:19,725 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 11:30:19,725 [printer.py:reinit()] - # Extruders: 1 2023-03-27 11:30:19,725 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 11:30:19,725 [printer.py:reinit()] - # Fans: 2 2023-03-27 11:30:19,726 [printer.py:reinit()] - # Output pins: 0 2023-03-27 11:30:19,726 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 11:30:19,989 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 11:30:19,991 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 11:30:19,992 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 11:30:20,039 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 11:30:20,065 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 11:30:20,082 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 11:30:20,083 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 11:30:20,084 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 11:30:20,084 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 11:30:20,085 [screen.py:init_printer()] - Printer initialized 2023-03-27 11:30:20,207 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-27 11:30:20,207 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-27 11:30:20,226 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 11:30:20,326 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 11:30:20,339 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 11:30:20,350 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 11:30:20,361 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 11:30:22,787 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 11:30:22,814 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 11:30:22,831 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 11:30:22,832 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 11:37:27,225 [printer.py:change_state()] - Changing state from 'ready' to 'printing' 2023-03-27 11:37:27,226 [printer.py:change_state()] - Adding callback for state: printing 2023-03-27 11:37:27,251 [screen.py:_load_panel()] - Loading panel: job_status 2023-03-27 11:37:27,251 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/job_status.py 2023-03-27 11:37:27,438 [screen.py:attach_panel()] - Current panel hierarchy: job_status 2023-03-27 11:37:27,439 [job_status.py:set_state()] - Changing job_status state from 'standby' to 'printing' 2023-03-27 11:37:27,459 [job_status.py:activate()] - Changing filename: 'None' to 'camera_case_back_v0.4.gcode' 2023-03-27 11:37:27,461 [job_status.py:update_file_metadata()] - Update Metadata. File: camera_case_back_v0.4.gcode Size: 423407 2023-03-27 11:37:27,462 [job_status.py:show_file_thumbnail()] - camera_case_back_v0.4.gcode 2023-03-27 11:37:27,462 [job_status.py:show_file_thumbnail()] - no pixbuf 2023-03-27 12:12:44,284 [job_status.py:set_state()] - Changing job_status state from 'printing' to 'complete' 2023-03-27 12:12:46,768 [printer.py:change_state()] - Changing state from 'printing' to 'ready' 2023-03-27 12:12:46,768 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 12:30:09,772 [screen.py:show_screensaver()] - Showing Screensaver --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-27 15:29:07,235 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-27 15:29:08,064 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-27 15:29:08,065 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-27 15:29:08,088 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-27 15:29:08,090 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-27 15:29:08,092 [config.py:__init__()] - Configuration validated succesfuly 2023-03-27 15:29:08,093 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-27 15:29:08,207 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-27 15:29:08,208 [config.py:install_language()] - Using system lang 2023-03-27 15:29:08,209 [config.py:install_language()] - Using lang en 2023-03-27 15:29:08,218 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-27 15:29:08,220 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-27 15:29:09,094 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-27 15:29:09,103 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-27 15:29:09,118 [screen.py:initial_connection()] - Default printer: None 2023-03-27 15:29:09,118 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-27 15:29:09,119 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-27 15:29:09,119 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-27 15:29:09,189 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 15:29:09,221 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:29:09,235 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-27 15:29:09,236 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-27 15:29:09,247 [_logging.py:info()] - Websocket connected 2023-03-27 15:29:09,247 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-27 15:29:09,296 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:29:09,326 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:29:09,345 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 15:29:09,374 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 15:29:09,377 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 15:29:09,377 [printer.py:reinit()] - # Extruders: 1 2023-03-27 15:29:09,378 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 15:29:09,378 [printer.py:reinit()] - # Fans: 2 2023-03-27 15:29:09,378 [printer.py:reinit()] - # Output pins: 0 2023-03-27 15:29:09,379 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 15:29:09,662 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 15:29:09,666 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-27 15:29:09,666 [printer.py:change_state()] - Adding callback for state: startup 2023-03-27 15:29:09,711 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:29:09,712 [printer.py:init_temp_store()] - Temp store: [] 2023-03-27 15:29:09,739 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:29:09,740 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:29:09,741 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 15:29:09,741 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 15:29:09,742 [screen.py:init_printer()] - Printer initialized 2023-03-27 15:29:12,458 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:29:12,459 [printer.py:init_temp_store()] - Temp store: [] 2023-03-27 15:29:12,477 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:29:12,478 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:29:35,710 [printer.py:change_state()] - Changing state from 'startup' to 'disconnected' 2023-03-27 15:29:35,710 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 15:29:35,711 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 15:29:35,724 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 15:29:35,748 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:29:35,763 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:29:35,763 [screen.py:init_printer()] - Klipper not connected 2023-03-27 15:29:39,469 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:29:39,496 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:29:39,517 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 15:29:39,545 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 15:29:39,549 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 15:29:39,549 [printer.py:reinit()] - # Extruders: 1 2023-03-27 15:29:39,550 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 15:29:39,550 [printer.py:reinit()] - # Fans: 2 2023-03-27 15:29:39,550 [printer.py:reinit()] - # Output pins: 0 2023-03-27 15:29:39,552 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 15:29:39,824 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 15:29:39,828 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-27 15:29:39,828 [printer.py:change_state()] - Adding callback for state: startup 2023-03-27 15:29:39,889 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:29:39,890 [printer.py:init_temp_store()] - Temp store: [] 2023-03-27 15:29:39,915 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:29:39,916 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:29:39,916 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 15:29:39,916 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 15:29:39,917 [screen.py:init_printer()] - Printer initialized 2023-03-27 15:29:42,457 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:29:42,458 [printer.py:init_temp_store()] - Temp store: [] 2023-03-27 15:29:42,478 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:29:42,479 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:29:49,384 [printer.py:change_state()] - Changing state from 'startup' to 'disconnected' 2023-03-27 15:29:49,384 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 15:29:49,386 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 15:29:49,407 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 15:29:49,448 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:29:49,472 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:29:49,473 [screen.py:init_printer()] - Klipper not connected 2023-03-27 15:29:52,456 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:29:52,470 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:29:52,486 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 15:29:52,506 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 15:29:52,509 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 15:29:52,509 [printer.py:reinit()] - # Extruders: 1 2023-03-27 15:29:52,509 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 15:29:52,510 [printer.py:reinit()] - # Fans: 2 2023-03-27 15:29:52,510 [printer.py:reinit()] - # Output pins: 0 2023-03-27 15:29:52,510 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 15:29:52,773 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 15:29:52,775 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-27 15:29:52,775 [printer.py:change_state()] - Adding callback for state: startup 2023-03-27 15:29:52,811 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:29:52,811 [printer.py:init_temp_store()] - Temp store: [] 2023-03-27 15:29:52,831 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:29:52,832 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:29:52,833 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 15:29:52,833 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 15:29:52,834 [screen.py:init_printer()] - Printer initialized 2023-03-27 15:29:53,268 [printer.py:change_state()] - Changing state from 'startup' to 'ready' 2023-03-27 15:29:53,268 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 15:29:53,276 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-27 15:29:53,277 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-27 15:29:53,303 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 15:29:53,412 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 15:29:53,431 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 15:29:53,442 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 15:29:53,451 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 15:29:53,454 [base_panel.py:show_heaters()] - Couldn't create heaters box: 'heater_bed_box' 2023-03-27 15:29:53,467 [base_panel.py:show_heaters()] - Couldn't create heaters box: 'heater_bed_box' 2023-03-27 15:29:55,472 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:29:55,517 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 15:29:55,534 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:29:55,535 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:33:45,047 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:35:20,409 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:35:20,438 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:36:53,333 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:36:53,381 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:39:25,470 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:39:25,496 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:41:05,266 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:41:05,298 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:42:54,947 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:42:54,992 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:46:34,072 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:46:34,103 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:48:13,048 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:48:13,084 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:50:32,649 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:50:32,680 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:50:59,095 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 15:50:59,096 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 15:50:59,097 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 15:50:59,104 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:50:59,115 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 15:50:59,142 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:50:59,164 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:50:59,165 [screen.py:init_printer()] - Klipper not connected 2023-03-27 15:51:02,471 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:51:02,507 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:51:02,536 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 15:51:02,564 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 15:51:02,567 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 15:51:02,567 [printer.py:reinit()] - # Extruders: 1 2023-03-27 15:51:02,567 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 15:51:02,567 [printer.py:reinit()] - # Fans: 2 2023-03-27 15:51:02,568 [printer.py:reinit()] - # Output pins: 0 2023-03-27 15:51:02,568 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 15:51:02,850 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 15:51:02,853 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 15:51:02,853 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 15:51:02,883 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:51:02,891 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 15:51:02,905 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:51:02,906 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:51:02,907 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 15:51:02,907 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 15:51:02,908 [screen.py:init_printer()] - Printer initialized 2023-03-27 15:51:02,915 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 15:51:02,996 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 15:51:03,004 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 15:51:03,013 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 15:51:03,022 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 15:51:05,499 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:51:05,517 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 15:51:05,551 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:51:05,552 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:52:50,620 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 15:52:50,667 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:52:56,638 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 15:52:56,639 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 15:52:56,641 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 15:52:56,650 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:52:56,674 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 15:52:56,727 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:52:56,743 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:52:56,744 [screen.py:init_printer()] - Klipper not connected 2023-03-27 15:53:00,467 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:53:00,491 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:53:00,515 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 15:53:00,558 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 15:53:00,562 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 15:53:00,563 [printer.py:reinit()] - # Extruders: 1 2023-03-27 15:53:00,563 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 15:53:00,563 [printer.py:reinit()] - # Fans: 2 2023-03-27 15:53:00,563 [printer.py:reinit()] - # Output pins: 0 2023-03-27 15:53:00,567 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 15:53:00,851 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 15:53:00,854 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 15:53:00,855 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 15:53:00,925 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:53:00,934 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 15:53:00,949 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:53:00,950 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:53:00,951 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 15:53:00,951 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 15:53:00,952 [screen.py:init_printer()] - Printer initialized 2023-03-27 15:53:00,960 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 15:53:01,043 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 15:53:01,058 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 15:53:01,068 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 15:53:01,077 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 15:53:03,497 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:53:03,514 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 15:53:03,539 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:53:03,540 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:54:15,831 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 15:54:15,862 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:54:35,498 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:54:35,536 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:54:38,936 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 15:54:38,937 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 15:54:38,939 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 15:54:38,947 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:54:38,960 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 15:54:38,989 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:54:39,013 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:54:39,014 [screen.py:init_printer()] - Klipper not connected 2023-03-27 15:54:42,471 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:54:42,499 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:54:42,526 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 15:54:42,546 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 15:54:42,549 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 15:54:42,549 [printer.py:reinit()] - # Extruders: 1 2023-03-27 15:54:42,549 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 15:54:42,550 [printer.py:reinit()] - # Fans: 2 2023-03-27 15:54:42,550 [printer.py:reinit()] - # Output pins: 0 2023-03-27 15:54:42,550 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 15:54:42,824 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 15:54:42,826 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 15:54:42,826 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 15:54:42,866 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:54:42,875 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 15:54:42,890 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:54:42,890 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:54:42,891 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 15:54:42,891 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 15:54:42,893 [screen.py:init_printer()] - Printer initialized 2023-03-27 15:54:42,899 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 15:54:42,981 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 15:54:42,990 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 15:54:43,001 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 15:54:43,012 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 15:54:45,502 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:54:45,519 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 15:54:45,546 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:54:45,548 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:55:56,798 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 15:55:56,849 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:56:41,395 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:56:41,430 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:56:45,002 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 15:56:45,003 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 15:56:45,005 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 15:56:45,019 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:56:45,031 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 15:56:45,063 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:56:45,087 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:56:45,088 [screen.py:init_printer()] - Klipper not connected 2023-03-27 15:56:48,468 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:56:48,494 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:56:48,517 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 15:56:48,546 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 15:56:48,550 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 15:56:48,550 [printer.py:reinit()] - # Extruders: 1 2023-03-27 15:56:48,551 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 15:56:48,551 [printer.py:reinit()] - # Fans: 2 2023-03-27 15:56:48,551 [printer.py:reinit()] - # Output pins: 0 2023-03-27 15:56:48,552 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 15:56:48,835 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 15:56:48,839 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-27 15:56:48,839 [printer.py:change_state()] - Adding callback for state: startup 2023-03-27 15:56:48,905 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:56:48,919 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 15:56:48,936 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:56:48,937 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:56:48,937 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 15:56:48,937 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 15:56:48,938 [screen.py:init_printer()] - Printer initialized 2023-03-27 15:56:49,290 [printer.py:change_state()] - Changing state from 'startup' to 'ready' 2023-03-27 15:56:49,290 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 15:56:49,296 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 15:56:49,373 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 15:56:49,382 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 15:56:49,391 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 15:56:49,400 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 15:56:51,499 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:56:51,517 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 15:56:51,539 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:56:51,540 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:57:58,041 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 15:57:58,082 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:58:27,426 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:58:27,460 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 15:58:30,475 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 15:58:30,475 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 15:58:30,478 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 15:58:30,487 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 15:58:30,499 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 15:58:30,530 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:58:30,554 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:58:30,554 [screen.py:init_printer()] - Klipper not connected 2023-03-27 15:58:33,468 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 15:58:33,498 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 15:58:33,527 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 15:58:33,562 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 15:58:33,565 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 15:58:33,566 [printer.py:reinit()] - # Extruders: 1 2023-03-27 15:58:33,566 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 15:58:33,566 [printer.py:reinit()] - # Fans: 2 2023-03-27 15:58:33,566 [printer.py:reinit()] - # Output pins: 0 2023-03-27 15:58:33,567 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 15:58:33,841 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 15:58:33,844 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-27 15:58:33,844 [printer.py:change_state()] - Adding callback for state: startup 2023-03-27 15:58:33,875 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:58:33,884 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 15:58:33,899 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:58:33,900 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:58:33,901 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 15:58:33,902 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 15:58:33,903 [screen.py:init_printer()] - Printer initialized 2023-03-27 15:58:36,500 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 15:58:36,516 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 15:58:36,543 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 15:58:36,544 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 15:58:44,586 [printer.py:change_state()] - Changing state from 'startup' to 'ready' 2023-03-27 15:58:44,587 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 15:58:44,598 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 15:58:44,702 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 15:58:44,711 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 15:58:44,720 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 15:58:44,729 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 15:59:53,432 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 15:59:53,466 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:00:36,988 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:00:37,019 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:00:39,465 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 16:00:39,465 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 16:00:39,467 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 16:00:39,475 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:00:39,487 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 16:00:39,516 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 16:00:39,540 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 16:00:39,541 [screen.py:init_printer()] - Klipper not connected 2023-03-27 16:00:42,470 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 16:00:42,497 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 16:00:42,525 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 16:00:42,555 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 16:00:42,558 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 16:00:42,558 [printer.py:reinit()] - # Extruders: 1 2023-03-27 16:00:42,559 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 16:00:42,559 [printer.py:reinit()] - # Fans: 2 2023-03-27 16:00:42,559 [printer.py:reinit()] - # Output pins: 0 2023-03-27 16:00:42,559 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 16:00:42,825 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 16:00:42,827 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-27 16:00:42,828 [printer.py:change_state()] - Adding callback for state: startup 2023-03-27 16:00:42,876 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 16:00:42,884 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 16:00:42,899 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 16:00:42,899 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 16:00:42,900 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 16:00:42,900 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 16:00:42,901 [screen.py:init_printer()] - Printer initialized 2023-03-27 16:00:43,052 [printer.py:change_state()] - Changing state from 'startup' to 'ready' 2023-03-27 16:00:43,053 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 16:00:43,058 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 16:00:43,135 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 16:00:43,144 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 16:00:43,153 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 16:00:43,161 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 16:00:45,497 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 16:00:45,514 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 16:00:45,540 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 16:00:45,542 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 16:01:51,843 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 16:01:51,880 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:03:32,004 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:03:32,041 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:05:37,329 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:05:37,364 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:06:06,220 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:06:06,256 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:06:08,766 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 16:06:08,767 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 16:06:08,768 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 16:06:08,776 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:06:08,788 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 16:06:08,815 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 16:06:08,837 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 16:06:08,837 [screen.py:init_printer()] - Klipper not connected 2023-03-27 16:06:12,465 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 16:06:12,489 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 16:06:12,512 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 16:06:12,695 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 16:06:12,698 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 16:06:12,698 [printer.py:reinit()] - # Extruders: 1 2023-03-27 16:06:12,699 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 16:06:12,699 [printer.py:reinit()] - # Fans: 2 2023-03-27 16:06:12,699 [printer.py:reinit()] - # Output pins: 0 2023-03-27 16:06:12,699 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 16:06:12,964 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 16:06:12,966 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 16:06:12,966 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 16:06:13,021 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 16:06:13,029 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 16:06:13,044 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 16:06:13,045 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 16:06:13,045 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 16:06:13,046 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 16:06:13,046 [screen.py:init_printer()] - Printer initialized 2023-03-27 16:06:13,054 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 16:06:13,139 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 16:06:13,148 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 16:06:13,157 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 16:06:13,167 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 16:06:15,500 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 16:06:15,514 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 16:06:15,539 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 16:06:15,540 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 16:07:33,611 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 16:07:33,632 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:09:26,408 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:09:26,439 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:10:03,652 [printer.py:change_state()] - Changing state from 'ready' to 'shutdown' 2023-03-27 16:10:03,653 [printer.py:change_state()] - Adding callback for state: shutdown 2023-03-27 16:10:03,664 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:10:03,673 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-27 16:03:13,018 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-27 16:13:20,978 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-27 16:13:20,979 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-27 16:13:21,009 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-27 16:13:21,011 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-27 16:13:21,013 [config.py:__init__()] - Configuration validated succesfuly 2023-03-27 16:13:21,014 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-27 16:13:21,134 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-27 16:13:21,135 [config.py:install_language()] - Using system lang 2023-03-27 16:13:21,136 [config.py:install_language()] - Using lang en 2023-03-27 16:13:21,145 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-27 16:13:21,147 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-27 16:13:22,112 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-27 16:13:22,122 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-27 16:13:22,139 [screen.py:initial_connection()] - Default printer: None 2023-03-27 16:13:22,139 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-27 16:13:22,140 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-27 16:13:22,140 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-27 16:13:22,214 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 16:13:22,245 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 16:13:22,259 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-27 16:13:22,260 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-27 16:13:22,271 [_logging.py:info()] - Websocket connected 2023-03-27 16:13:22,271 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-27 16:13:22,325 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 16:13:22,356 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 16:13:22,371 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 16:13:22,553 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 16:13:22,556 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 16:13:22,556 [printer.py:reinit()] - # Extruders: 1 2023-03-27 16:13:22,556 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 16:13:22,556 [printer.py:reinit()] - # Fans: 2 2023-03-27 16:13:22,556 [printer.py:reinit()] - # Output pins: 0 2023-03-27 16:13:22,557 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 16:13:22,826 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 16:13:22,828 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 16:13:22,829 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 16:13:22,857 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 16:13:22,887 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 16:13:22,902 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 16:13:22,903 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 16:13:22,903 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 16:13:22,903 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 16:13:22,905 [screen.py:init_printer()] - Printer initialized 2023-03-27 16:13:22,910 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-27 16:13:22,911 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-27 16:13:22,926 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 16:13:23,016 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 16:13:23,031 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 16:13:23,046 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 16:13:23,061 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 16:13:24,835 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 16:13:24,904 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 16:13:24,918 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 16:13:24,919 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 16:14:38,928 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:17:06,267 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:17:06,299 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:18:00,087 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 16:18:00,088 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 16:18:00,090 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 16:18:00,098 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:18:00,112 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 16:18:00,146 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 16:18:00,173 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 16:18:00,174 [screen.py:init_printer()] - Klipper not connected 2023-03-27 16:18:03,824 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 16:18:03,849 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 16:18:03,874 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 16:18:04,036 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 16:18:04,039 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 16:18:04,039 [printer.py:reinit()] - # Extruders: 1 2023-03-27 16:18:04,039 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 16:18:04,039 [printer.py:reinit()] - # Fans: 2 2023-03-27 16:18:04,039 [printer.py:reinit()] - # Output pins: 0 2023-03-27 16:18:04,040 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 16:18:04,325 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 16:18:04,328 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 16:18:04,329 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 16:18:04,350 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 16:18:04,375 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 16:18:04,390 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 16:18:04,391 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 16:18:04,392 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 16:18:04,392 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 16:18:04,393 [screen.py:init_printer()] - Printer initialized 2023-03-27 16:18:04,400 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 16:18:04,483 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 16:18:04,491 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 16:18:04,500 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 16:18:04,509 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 16:18:06,839 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 16:18:06,881 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 16:18:06,904 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 16:18:06,905 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 16:20:15,937 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 16:20:15,976 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:21:57,627 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:21:57,659 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:23:28,451 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:23:28,490 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:24:30,757 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:24:30,794 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:25:56,259 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:25:56,291 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:27:08,963 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:27:08,995 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:28:26,071 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:28:26,102 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:29:03,900 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 16:29:03,900 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 16:29:03,903 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 16:29:03,912 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:29:03,926 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 16:29:03,958 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 16:29:03,982 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 16:29:03,982 [screen.py:init_printer()] - Klipper not connected 2023-03-27 16:29:06,827 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 16:29:06,854 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 16:29:06,885 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 16:29:06,923 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 16:29:06,928 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 16:29:06,928 [printer.py:reinit()] - # Extruders: 1 2023-03-27 16:29:06,929 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 16:29:06,929 [printer.py:reinit()] - # Fans: 2 2023-03-27 16:29:06,930 [printer.py:reinit()] - # Output pins: 0 2023-03-27 16:29:06,931 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 16:29:07,198 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 16:29:07,200 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-27 16:29:07,201 [printer.py:change_state()] - Adding callback for state: startup 2023-03-27 16:29:07,230 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 16:29:07,245 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 16:29:07,262 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 16:29:07,263 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 16:29:07,264 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 16:29:07,264 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 16:29:07,265 [screen.py:init_printer()] - Printer initialized 2023-03-27 16:29:08,204 [printer.py:change_state()] - Changing state from 'startup' to 'ready' 2023-03-27 16:29:08,204 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 16:29:08,215 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 16:29:08,321 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 16:29:08,330 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 16:29:08,339 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 16:29:08,349 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 16:29:09,852 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 16:29:09,879 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 16:29:09,902 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 16:29:09,903 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 16:30:16,498 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 16:30:16,528 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:34:02,427 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:34:02,462 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:35:22,592 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:35:22,633 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:37:48,054 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:37:48,086 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:38:41,842 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:38:41,878 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:39:56,278 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:39:56,307 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:41:19,837 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:41:19,872 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 16:44:00,298 [printer.py:change_state()] - Changing state from 'ready' to 'shutdown' 2023-03-27 16:44:00,299 [printer.py:change_state()] - Adding callback for state: shutdown 2023-03-27 16:44:00,309 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 16:44:00,326 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 17:13:22,804 [screen.py:show_screensaver()] - Showing Screensaver --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-27 17:17:35,764 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-27 17:17:36,063 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-27 17:17:36,064 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-27 17:17:36,087 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-27 17:17:36,089 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-27 17:17:36,091 [config.py:__init__()] - Configuration validated succesfuly 2023-03-27 17:17:36,092 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-27 17:17:36,207 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-27 17:17:36,208 [config.py:install_language()] - Using system lang 2023-03-27 17:17:36,209 [config.py:install_language()] - Using lang en 2023-03-27 17:17:36,221 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-27 17:17:36,225 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-27 17:17:37,119 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-27 17:17:37,129 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-27 17:17:37,145 [screen.py:initial_connection()] - Default printer: None 2023-03-27 17:17:37,145 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-27 17:17:37,146 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-27 17:17:37,146 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-27 17:17:37,218 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 17:17:37,251 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 17:17:37,265 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-27 17:17:37,266 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-27 17:17:37,277 [_logging.py:info()] - Websocket connected 2023-03-27 17:17:37,278 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-27 17:17:37,309 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 17:17:37,340 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 17:17:37,355 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 17:17:37,480 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 17:17:37,485 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 17:17:37,486 [printer.py:reinit()] - # Extruders: 1 2023-03-27 17:17:37,486 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 17:17:37,486 [printer.py:reinit()] - # Fans: 2 2023-03-27 17:17:37,487 [printer.py:reinit()] - # Output pins: 0 2023-03-27 17:17:37,488 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 17:17:37,756 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 17:17:37,758 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 17:17:37,758 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 17:17:37,777 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 17:17:37,808 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 17:17:37,823 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 17:17:37,824 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 17:17:37,825 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 17:17:37,825 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 17:17:37,825 [screen.py:init_printer()] - Printer initialized 2023-03-27 17:17:37,853 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-27 17:17:37,853 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-27 17:17:37,873 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 17:17:37,959 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 17:17:37,970 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 17:17:37,981 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 17:17:37,990 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 17:18:45,657 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 17:18:45,712 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 17:18:45,732 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 17:18:45,733 [screen.py:init_tempstore()] - Temperature store size: 1200 --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-27 17:22:16,689 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-27 17:22:16,950 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-27 17:22:16,953 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-27 17:22:16,973 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-27 17:22:16,975 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-27 17:22:16,977 [config.py:__init__()] - Configuration validated succesfuly 2023-03-27 17:22:16,978 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-27 17:22:17,096 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-27 17:22:17,097 [config.py:install_language()] - Using system lang 2023-03-27 17:22:17,098 [config.py:install_language()] - Using lang en 2023-03-27 17:22:17,110 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-27 17:22:17,112 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-27 17:22:18,015 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-27 17:22:18,024 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-27 17:22:18,039 [screen.py:initial_connection()] - Default printer: None 2023-03-27 17:22:18,039 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-27 17:22:18,040 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-27 17:22:18,040 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-27 17:22:18,111 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 17:22:18,143 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 17:22:18,157 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-27 17:22:18,158 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-27 17:22:18,172 [_logging.py:info()] - Websocket connected 2023-03-27 17:22:18,172 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-27 17:22:18,200 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 17:22:18,230 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 17:22:18,244 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 17:22:18,354 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 17:22:18,357 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 17:22:18,357 [printer.py:reinit()] - # Extruders: 1 2023-03-27 17:22:18,358 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 17:22:18,358 [printer.py:reinit()] - # Fans: 2 2023-03-27 17:22:18,358 [printer.py:reinit()] - # Output pins: 0 2023-03-27 17:22:18,359 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 17:22:18,652 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 17:22:18,662 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 17:22:18,662 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 17:22:18,709 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 17:22:18,735 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 17:22:18,750 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 17:22:18,751 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 17:22:18,752 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 17:22:18,752 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 17:22:18,753 [screen.py:init_printer()] - Printer initialized 2023-03-27 17:22:18,782 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-27 17:22:18,782 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-27 17:22:18,801 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 17:22:18,885 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 17:22:18,894 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 17:22:18,904 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 17:22:18,913 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 17:22:21,148 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 17:22:21,188 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 17:22:21,203 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 17:22:21,204 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 17:24:05,502 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:26:00,691 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:26:00,728 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:27:29,222 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:27:29,242 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:30:24,262 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:30:24,281 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:32:58,163 [printer.py:change_state()] - Changing state from 'ready' to 'shutdown' 2023-03-27 17:32:58,163 [printer.py:change_state()] - Adding callback for state: shutdown 2023-03-27 17:32:58,176 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:32:58,196 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 17:34:57,699 [printer.py:change_state()] - Changing state from 'shutdown' to 'disconnected' 2023-03-27 17:34:57,700 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 17:34:57,702 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 17:34:57,716 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 17:34:57,746 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 17:34:57,770 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 17:34:57,771 [screen.py:init_printer()] - Klipper not connected 2023-03-27 17:35:01,149 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 17:35:01,179 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 17:35:01,205 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 17:35:01,226 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 17:35:01,228 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 17:35:01,229 [printer.py:reinit()] - # Extruders: 1 2023-03-27 17:35:01,229 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 17:35:01,229 [printer.py:reinit()] - # Fans: 2 2023-03-27 17:35:01,229 [printer.py:reinit()] - # Output pins: 0 2023-03-27 17:35:01,230 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 17:35:01,509 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 17:35:01,511 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 17:35:01,511 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 17:35:01,537 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 17:35:01,555 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 17:35:01,570 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 17:35:01,571 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 17:35:01,573 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 17:35:01,573 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 17:35:01,575 [screen.py:init_printer()] - Printer initialized 2023-03-27 17:35:01,580 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 17:35:01,667 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 17:35:01,675 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 17:35:01,684 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 17:35:01,693 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 17:35:04,165 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 17:35:04,202 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 17:35:04,227 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 17:35:04,228 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 17:35:23,544 [printer.py:change_state()] - Changing state from 'ready' to 'shutdown' 2023-03-27 17:35:23,545 [printer.py:change_state()] - Adding callback for state: shutdown 2023-03-27 17:35:23,569 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-27 17:30:42,307 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-27 17:30:42,568 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-27 17:30:42,569 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-27 17:30:42,589 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-27 17:30:42,591 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-27 17:30:42,593 [config.py:__init__()] - Configuration validated succesfuly 2023-03-27 17:30:42,594 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-27 17:30:42,708 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-27 17:30:42,709 [config.py:install_language()] - Using system lang 2023-03-27 17:30:42,710 [config.py:install_language()] - Using lang en 2023-03-27 17:30:42,720 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-27 17:30:42,722 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-27 17:30:43,671 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-27 17:30:43,682 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-27 17:30:43,702 [screen.py:initial_connection()] - Default printer: None 2023-03-27 17:30:43,702 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-27 17:30:43,703 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-27 17:30:43,703 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-27 17:30:43,782 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 17:30:43,816 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 17:30:43,831 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-27 17:30:43,831 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-27 17:30:43,844 [_logging.py:info()] - Websocket connected 2023-03-27 17:30:43,845 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-27 17:30:43,875 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 17:30:43,905 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 17:30:43,921 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 17:30:44,010 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 17:30:44,012 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 17:30:44,012 [printer.py:reinit()] - # Extruders: 1 2023-03-27 17:30:44,012 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 17:30:44,012 [printer.py:reinit()] - # Fans: 2 2023-03-27 17:30:44,013 [printer.py:reinit()] - # Output pins: 0 2023-03-27 17:30:44,013 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 17:30:44,288 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 17:30:44,290 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 17:30:44,291 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 17:30:44,315 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 17:30:44,341 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 17:30:44,360 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 17:30:44,361 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 17:30:44,363 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 17:30:44,363 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 17:30:44,364 [screen.py:init_printer()] - Printer initialized 2023-03-27 17:30:44,390 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-27 17:30:44,391 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-27 17:30:44,412 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 17:30:44,515 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 17:30:44,528 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 17:30:44,542 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 17:30:44,555 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 17:36:50,862 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 17:36:50,909 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 17:36:50,937 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 17:36:50,939 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 17:38:01,572 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:39:16,607 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:39:16,648 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:40:30,680 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:40:30,711 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:43:25,180 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:43:25,207 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:45:19,958 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:45:19,993 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:46:18,588 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:46:18,621 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:46:24,259 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:46:24,279 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:47:14,493 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:47:14,512 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:49:13,736 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:49:13,768 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:50:34,586 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:50:34,620 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:53:04,955 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:53:04,990 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:53:27,487 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 17:53:27,488 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 17:53:27,490 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 17:53:27,500 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 17:53:27,514 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 17:53:27,550 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 17:53:27,576 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 17:53:27,576 [screen.py:init_printer()] - Klipper not connected 2023-03-27 17:53:30,864 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 17:53:30,888 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 17:53:30,914 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 17:53:30,955 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 17:53:30,960 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 17:53:30,960 [printer.py:reinit()] - # Extruders: 1 2023-03-27 17:53:30,962 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 17:53:30,963 [printer.py:reinit()] - # Fans: 2 2023-03-27 17:53:30,963 [printer.py:reinit()] - # Output pins: 0 2023-03-27 17:53:30,964 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 17:53:31,230 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 17:53:31,232 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 17:53:31,232 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 17:53:31,264 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 17:53:31,277 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 17:53:31,292 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 17:53:31,292 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 17:53:31,293 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 17:53:31,293 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 17:53:31,295 [screen.py:init_printer()] - Printer initialized 2023-03-27 17:53:31,309 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 17:53:31,395 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 17:53:31,404 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 17:53:31,413 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 17:53:31,422 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 17:53:33,886 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 17:53:33,910 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 17:53:33,945 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 17:53:33,946 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 17:53:52,514 [printer.py:change_state()] - Changing state from 'ready' to 'printing' 2023-03-27 17:53:52,515 [printer.py:change_state()] - Adding callback for state: printing 2023-03-27 17:53:52,534 [screen.py:_load_panel()] - Loading panel: job_status 2023-03-27 17:53:52,535 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/job_status.py 2023-03-27 17:53:52,727 [screen.py:attach_panel()] - Current panel hierarchy: job_status 2023-03-27 17:53:52,728 [job_status.py:set_state()] - Changing job_status state from 'standby' to 'printing' 2023-03-27 17:53:52,748 [job_status.py:activate()] - Changing filename: 'None' to 'camera_case_back_v0.4-2.gcode' 2023-03-27 17:53:52,749 [job_status.py:update_file_metadata()] - Update Metadata. File: camera_case_back_v0.4-2.gcode Size: 420533 2023-03-27 17:53:52,750 [job_status.py:show_file_thumbnail()] - camera_case_back_v0.4-2.gcode 2023-03-27 17:53:52,750 [job_status.py:show_file_thumbnail()] - no pixbuf 2023-03-27 17:56:36,763 [job_status.py:set_state()] - Changing job_status state from 'printing' to 'cancelled' 2023-03-27 17:56:39,268 [printer.py:change_state()] - Changing state from 'printing' to 'ready' 2023-03-27 17:56:39,269 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 17:58:36,945 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 17:58:36,979 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 17:58:53,730 [job_status.py:set_state()] - Changing job_status state from 'cancelled' to 'standby' 2023-03-27 17:59:03,504 [printer.py:change_state()] - Changing state from 'ready' to 'printing' 2023-03-27 17:59:03,504 [printer.py:change_state()] - Adding callback for state: printing 2023-03-27 17:59:03,507 [job_status.py:set_state()] - Changing job_status state from 'standby' to 'printing' 2023-03-27 17:59:03,525 [job_status.py:update_file_metadata()] - Update Metadata. File: camera_case_back_v0.4-2.gcode Size: 420533 2023-03-27 17:59:03,526 [job_status.py:show_file_thumbnail()] - camera_case_back_v0.4-2.gcode 2023-03-27 17:59:03,526 [job_status.py:show_file_thumbnail()] - no pixbuf 2023-03-27 18:00:51,824 [printer.py:change_state()] - Changing state from 'printing' to 'ready' 2023-03-27 18:00:51,825 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 18:00:51,838 [job_status.py:set_state()] - Changing job_status state from 'printing' to 'cancelled' 2023-03-27 18:01:11,649 [job_status.py:set_state()] - Changing job_status state from 'cancelled' to 'standby' 2023-03-27 18:01:18,411 [printer.py:change_state()] - Changing state from 'ready' to 'printing' 2023-03-27 18:01:18,412 [printer.py:change_state()] - Adding callback for state: printing 2023-03-27 18:01:18,416 [job_status.py:set_state()] - Changing job_status state from 'standby' to 'printing' 2023-03-27 18:01:18,433 [job_status.py:update_file_metadata()] - Update Metadata. File: camera_case_back_v0.4-2.gcode Size: 420533 2023-03-27 18:01:18,435 [job_status.py:show_file_thumbnail()] - camera_case_back_v0.4-2.gcode 2023-03-27 18:01:18,436 [job_status.py:show_file_thumbnail()] - no pixbuf 2023-03-27 18:03:22,774 [job_status.py:set_state()] - Changing job_status state from 'printing' to 'cancelled' 2023-03-27 18:03:26,267 [printer.py:change_state()] - Changing state from 'printing' to 'ready' 2023-03-27 18:03:26,267 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 18:05:08,445 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 18:05:08,479 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 18:05:18,985 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 18:05:18,985 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 18:05:18,986 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 18:05:18,993 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 18:05:19,004 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 18:05:19,030 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 18:05:19,050 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 18:05:19,050 [screen.py:init_printer()] - Klipper not connected 2023-03-27 18:05:21,866 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 18:05:21,893 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 18:05:21,922 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 18:05:21,946 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 18:05:21,950 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 18:05:21,950 [printer.py:reinit()] - # Extruders: 1 2023-03-27 18:05:21,950 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 18:05:21,950 [printer.py:reinit()] - # Fans: 2 2023-03-27 18:05:21,950 [printer.py:reinit()] - # Output pins: 0 2023-03-27 18:05:21,951 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 18:05:22,226 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 18:05:22,228 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-27 18:05:22,229 [printer.py:change_state()] - Adding callback for state: startup 2023-03-27 18:05:22,266 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 18:05:22,275 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 18:05:22,290 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 18:05:22,290 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 18:05:22,291 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 18:05:22,292 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 18:05:22,292 [screen.py:init_printer()] - Printer initialized 2023-03-27 18:05:23,223 [printer.py:change_state()] - Changing state from 'startup' to 'ready' 2023-03-27 18:05:23,224 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 18:05:23,235 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 18:05:23,345 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 18:05:23,353 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 18:05:23,362 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 18:05:23,370 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 18:05:24,901 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 18:05:24,916 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 18:05:24,941 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 18:05:24,942 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 18:07:28,027 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 18:07:28,066 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 18:08:54,430 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 18:08:54,449 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 18:10:02,942 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 18:10:02,974 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 18:11:27,303 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 18:11:27,342 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 18:13:07,617 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 18:13:07,659 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 18:15:58,341 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 18:15:58,376 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 18:18:43,636 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 18:18:43,667 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 18:18:49,737 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 18:18:49,772 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 18:19:38,831 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 18:19:38,869 [KlippyGtk.py:Dialog()] - Showing dialog --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-27 18:17:33,358 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-27 18:17:33,620 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-27 18:17:33,621 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-27 18:17:33,648 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-27 18:17:33,649 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-27 18:17:33,651 [config.py:__init__()] - Configuration validated succesfuly 2023-03-27 18:17:33,652 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-27 18:17:33,776 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-27 18:17:33,776 [config.py:install_language()] - Using system lang 2023-03-27 18:17:33,778 [config.py:install_language()] - Using lang en 2023-03-27 18:17:33,786 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-27 18:17:33,788 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-27 18:17:34,667 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-27 18:17:34,676 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-27 18:17:34,691 [screen.py:initial_connection()] - Default printer: None 2023-03-27 18:17:34,691 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-27 18:17:34,691 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-27 18:17:34,692 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-27 18:17:34,761 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 18:17:34,793 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 18:17:34,807 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-27 18:17:34,808 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-27 18:17:34,823 [_logging.py:info()] - Websocket connected 2023-03-27 18:17:34,823 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-27 18:17:34,871 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 18:17:34,901 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 18:17:34,917 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 18:17:35,022 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 18:17:35,026 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 18:17:35,027 [printer.py:reinit()] - # Extruders: 1 2023-03-27 18:17:35,027 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 18:17:35,027 [printer.py:reinit()] - # Fans: 2 2023-03-27 18:17:35,028 [printer.py:reinit()] - # Output pins: 0 2023-03-27 18:17:35,029 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 18:17:35,322 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 18:17:35,339 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 18:17:35,339 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 18:17:35,379 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 18:17:35,404 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 18:17:35,419 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 18:17:35,420 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 18:17:35,421 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 18:17:35,421 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 18:17:35,423 [screen.py:init_printer()] - Printer initialized 2023-03-27 18:17:35,428 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-27 18:17:35,428 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-27 19:51:42,523 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 19:51:42,657 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 19:51:42,667 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 19:51:42,677 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 19:51:42,686 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 19:51:44,264 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 19:51:44,318 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 19:51:44,343 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 19:51:44,345 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 19:52:15,511 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 19:53:27,198 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 19:53:27,234 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 19:54:53,244 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 19:54:53,279 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 19:55:22,939 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 19:55:22,985 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 19:56:14,202 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 19:56:14,240 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 19:56:49,647 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 19:56:49,681 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 19:57:39,985 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 19:57:40,021 [KlippyGtk.py:Dialog()] - Showing dialog --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-27 19:53:46,310 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-27 19:53:46,577 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-27 19:53:46,580 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-27 19:53:46,600 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-27 19:53:46,602 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-27 19:53:46,604 [config.py:__init__()] - Configuration validated succesfuly 2023-03-27 19:53:46,605 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-27 19:53:46,730 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-27 19:53:46,730 [config.py:install_language()] - Using system lang 2023-03-27 19:53:46,732 [config.py:install_language()] - Using lang en 2023-03-27 19:53:46,742 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-27 19:53:46,744 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-27 19:53:48,116 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-27 19:53:48,130 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-27 19:53:48,150 [screen.py:initial_connection()] - Default printer: None 2023-03-27 19:53:48,151 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-27 19:53:48,152 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-27 19:53:48,152 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-27 19:53:48,237 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 19:53:48,268 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 19:53:48,283 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-27 19:53:48,284 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-27 19:53:48,295 [_logging.py:info()] - Websocket connected 2023-03-27 19:53:48,296 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-27 19:53:48,346 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 19:53:48,377 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 19:53:48,393 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 19:53:48,448 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 19:53:48,451 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 19:53:48,451 [printer.py:reinit()] - # Extruders: 1 2023-03-27 19:53:48,451 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 19:53:48,451 [printer.py:reinit()] - # Fans: 2 2023-03-27 19:53:48,452 [printer.py:reinit()] - # Output pins: 0 2023-03-27 19:53:48,452 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 19:53:48,734 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 19:53:48,736 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 19:53:48,736 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 19:53:48,758 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 19:53:48,785 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 19:53:48,800 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 19:53:48,801 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 19:53:48,802 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 19:53:48,802 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 19:53:48,803 [screen.py:init_printer()] - Printer initialized 2023-03-27 19:53:48,807 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-27 19:53:48,808 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-27 19:53:48,825 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 19:53:48,923 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 19:53:48,937 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 19:53:48,953 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 19:53:48,966 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 20:00:57,032 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 20:00:57,059 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 20:00:57,076 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 20:00:57,077 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 20:01:36,036 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:02:51,379 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:02:51,409 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:03:46,932 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:03:46,970 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:04:36,379 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:04:36,421 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:05:12,510 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:05:12,548 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:06:10,638 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:06:10,658 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:07:02,844 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:07:02,881 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:07:54,314 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:07:54,343 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:08:43,446 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:08:43,482 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:09:35,245 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:09:35,265 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:10:00,351 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:10:00,371 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:10:51,054 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:10:51,086 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:11:35,642 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:11:35,662 [KlippyGtk.py:Dialog()] - Showing dialog --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-27 20:09:23,717 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-27 20:09:23,980 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-27 20:09:23,984 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-27 20:09:24,004 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-27 20:09:24,006 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-27 20:09:24,008 [config.py:__init__()] - Configuration validated succesfuly 2023-03-27 20:09:24,009 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-27 20:09:24,126 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-27 20:09:24,127 [config.py:install_language()] - Using system lang 2023-03-27 20:09:24,128 [config.py:install_language()] - Using lang en 2023-03-27 20:09:24,137 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-27 20:09:24,139 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-27 20:09:25,026 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-27 20:09:25,037 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-27 20:09:25,052 [screen.py:initial_connection()] - Default printer: None 2023-03-27 20:09:25,052 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-27 20:09:25,052 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-27 20:09:25,053 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-27 20:09:25,122 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 20:09:25,154 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 20:09:25,168 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-27 20:09:25,169 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-27 20:09:25,179 [_logging.py:info()] - Websocket connected 2023-03-27 20:09:25,180 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-27 20:09:25,220 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 20:09:25,259 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 20:09:25,279 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 20:09:25,363 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 20:09:25,365 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 20:09:25,366 [printer.py:reinit()] - # Extruders: 1 2023-03-27 20:09:25,366 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 20:09:25,366 [printer.py:reinit()] - # Fans: 2 2023-03-27 20:09:25,366 [printer.py:reinit()] - # Output pins: 0 2023-03-27 20:09:25,367 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 20:09:25,653 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 20:09:25,655 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 20:09:25,656 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 20:09:25,671 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 20:09:25,697 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 20:09:25,713 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 20:09:25,714 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 20:09:25,716 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 20:09:25,716 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 20:09:25,717 [screen.py:init_printer()] - Printer initialized 2023-03-27 20:09:25,744 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-27 20:09:25,745 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-27 20:09:25,765 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 20:27:09,776 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 20:27:09,787 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 20:27:09,797 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 20:27:09,806 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 20:27:11,989 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 20:27:12,037 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 20:27:12,062 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 20:27:12,063 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 20:27:53,241 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:29:33,861 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:29:33,896 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:30:23,223 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:30:23,260 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:31:11,840 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:31:11,872 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:31:52,092 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:31:52,133 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:32:46,310 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:32:46,345 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:33:14,345 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:33:14,379 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:34:13,407 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:34:13,436 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:35:06,410 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:35:06,445 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:35:58,972 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:35:59,004 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:37:31,550 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:37:31,591 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:39:57,399 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:39:57,429 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:46:01,873 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:46:01,913 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:46:52,605 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:46:52,640 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:47:26,055 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:47:26,088 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:48:19,513 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:48:19,547 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:48:46,544 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:48:46,576 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:49:42,992 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:49:43,023 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:50:15,696 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:50:15,717 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:51:06,471 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:51:06,506 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:51:31,917 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:51:31,954 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:52:25,412 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:52:25,431 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:52:55,523 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:52:55,542 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:53:49,103 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:53:49,141 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:54:19,926 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:54:19,968 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:55:13,687 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:55:13,720 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:55:36,344 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:55:36,382 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:56:27,003 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:56:27,035 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 20:58:38,868 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 20:58:38,905 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:21:57,205 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:21:57,242 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:23:35,083 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:23:35,113 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:26:37,258 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:26:37,294 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:27:49,235 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:27:49,266 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:29:15,555 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:29:15,576 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:30:36,467 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:30:36,510 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:31:51,181 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:31:51,211 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:33:48,845 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:33:48,900 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:35:19,237 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:35:19,272 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:36:55,617 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:36:55,636 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:38:10,083 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:38:10,104 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:38:31,441 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 21:38:31,441 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 21:38:31,442 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 21:38:31,450 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:38:31,463 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 21:38:31,495 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 21:38:31,518 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 21:38:31,519 [screen.py:init_printer()] - Klipper not connected 2023-03-27 21:38:34,993 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 21:38:35,022 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 21:38:35,044 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 21:38:35,070 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 21:38:35,073 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 21:38:35,074 [printer.py:reinit()] - # Extruders: 1 2023-03-27 21:38:35,074 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 21:38:35,074 [printer.py:reinit()] - # Fans: 2 2023-03-27 21:38:35,074 [printer.py:reinit()] - # Output pins: 0 2023-03-27 21:38:35,076 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 21:38:35,367 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 21:38:35,377 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 21:38:35,377 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 21:38:35,413 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 21:38:35,421 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 21:38:35,436 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 21:38:35,437 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 21:38:35,437 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 21:38:35,437 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 21:38:35,438 [screen.py:init_printer()] - Printer initialized 2023-03-27 21:38:35,446 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 21:38:35,530 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 21:38:35,538 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 21:38:35,547 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 21:38:35,555 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 21:38:38,022 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 21:38:38,040 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 21:38:38,064 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 21:38:38,066 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 21:40:34,476 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 21:40:34,515 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:40:52,162 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 21:40:52,162 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 21:40:52,164 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 21:40:52,172 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:40:52,182 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 21:40:52,209 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 21:40:52,230 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 21:40:52,231 [screen.py:init_printer()] - Klipper not connected 2023-03-27 21:40:55,988 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 21:40:56,015 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 21:40:56,042 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 21:40:56,081 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 21:40:56,084 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 21:40:56,085 [printer.py:reinit()] - # Extruders: 1 2023-03-27 21:40:56,085 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 21:40:56,085 [printer.py:reinit()] - # Fans: 2 2023-03-27 21:40:56,085 [printer.py:reinit()] - # Output pins: 0 2023-03-27 21:40:56,086 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 21:40:56,369 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 21:40:56,371 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-27 21:40:56,371 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 21:40:56,405 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 21:40:56,415 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 21:40:56,429 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 21:40:56,430 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 21:40:56,432 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 21:40:56,432 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 21:40:56,433 [screen.py:init_printer()] - Printer initialized 2023-03-27 21:40:56,439 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 21:40:56,533 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 21:40:56,542 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 21:40:56,551 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 21:40:56,560 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 21:40:59,023 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 21:40:59,042 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 21:40:59,069 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 21:40:59,070 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 21:41:00,846 [printer.py:change_state()] - Changing state from 'ready' to 'printing' 2023-03-27 21:41:00,846 [printer.py:change_state()] - Adding callback for state: printing 2023-03-27 21:41:00,893 [screen.py:_load_panel()] - Loading panel: job_status 2023-03-27 21:41:00,893 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/job_status.py 2023-03-27 21:41:01,096 [screen.py:attach_panel()] - Current panel hierarchy: job_status 2023-03-27 21:41:01,096 [job_status.py:set_state()] - Changing job_status state from 'standby' to 'printing' 2023-03-27 21:41:01,116 [job_status.py:activate()] - Changing filename: 'None' to 'camera_case_back_v0.4-2.gcode' 2023-03-27 21:41:01,117 [job_status.py:update_file_metadata()] - Update Metadata. File: camera_case_back_v0.4-2.gcode Size: 420533 2023-03-27 21:41:01,118 [job_status.py:show_file_thumbnail()] - camera_case_back_v0.4-2.gcode 2023-03-27 21:41:01,118 [job_status.py:show_file_thumbnail()] - no pixbuf 2023-03-27 21:43:17,289 [job_status.py:set_state()] - Changing job_status state from 'printing' to 'cancelled' 2023-03-27 21:43:19,523 [printer.py:change_state()] - Changing state from 'printing' to 'ready' 2023-03-27 21:43:19,523 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 21:44:02,678 [job_status.py:set_state()] - Changing job_status state from 'cancelled' to 'standby' 2023-03-27 21:44:05,930 [printer.py:change_state()] - Changing state from 'ready' to 'printing' 2023-03-27 21:44:05,930 [printer.py:change_state()] - Adding callback for state: printing 2023-03-27 21:44:05,931 [job_status.py:set_state()] - Changing job_status state from 'standby' to 'printing' 2023-03-27 21:44:05,950 [job_status.py:update_file_metadata()] - Update Metadata. File: camera_case_back_v0.4-2.gcode Size: 420533 2023-03-27 21:44:05,951 [job_status.py:show_file_thumbnail()] - camera_case_back_v0.4-2.gcode 2023-03-27 21:44:05,951 [job_status.py:show_file_thumbnail()] - no pixbuf 2023-03-27 21:46:36,914 [job_status.py:set_state()] - Changing job_status state from 'printing' to 'cancelled' 2023-03-27 21:46:40,654 [printer.py:change_state()] - Changing state from 'printing' to 'ready' 2023-03-27 21:46:40,655 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 21:48:27,931 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 21:48:27,960 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:49:57,141 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:49:57,174 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:49:57,969 [screen.py:show_screensaver()] - Showing Screensaver 2023-03-27 21:49:57,970 [screen.py:show_screensaver()] - Hiding dialog 2023-03-27 21:51:16,939 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:51:16,971 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:52:36,470 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:52:36,501 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:53:00,922 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 21:53:00,923 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 21:53:00,925 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 21:53:00,926 [screen.py:close_screensaver()] - Closing Screensaver 2023-03-27 21:53:00,970 [screen.py:wake_screen()] - Screen wake up 2023-03-27 21:53:00,981 [screen.py:close_screensaver()] - Restoring Dialog 2023-03-27 21:53:00,986 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:53:00,992 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 21:53:01,009 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 21:53:01,023 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 21:53:01,023 [screen.py:init_printer()] - Klipper not connected 2023-03-27 21:53:03,990 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 21:53:04,018 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 21:53:04,037 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 21:53:04,064 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 21:53:04,068 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 21:53:04,068 [printer.py:reinit()] - # Extruders: 1 2023-03-27 21:53:04,068 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 21:53:04,069 [printer.py:reinit()] - # Fans: 2 2023-03-27 21:53:04,069 [printer.py:reinit()] - # Output pins: 0 2023-03-27 21:53:04,071 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 21:53:04,355 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 21:53:04,359 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-27 21:53:04,364 [printer.py:change_state()] - Adding callback for state: startup 2023-03-27 21:53:04,436 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 21:53:04,445 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 21:53:04,459 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 21:53:04,460 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 21:53:04,461 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 21:53:04,461 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 21:53:04,462 [screen.py:init_printer()] - Printer initialized 2023-03-27 21:53:05,332 [printer.py:change_state()] - Changing state from 'startup' to 'ready' 2023-03-27 21:53:05,333 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 21:53:05,338 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 21:53:05,424 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 21:53:05,433 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 21:53:05,441 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 21:53:05,452 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 21:53:07,030 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 21:53:07,040 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 21:53:07,057 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 21:53:07,058 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 21:54:55,052 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 21:54:55,085 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:55:06,091 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 21:55:06,091 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 21:55:06,094 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 21:55:06,099 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:55:06,108 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 21:55:06,130 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 21:55:06,145 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 21:55:06,146 [screen.py:init_printer()] - Klipper not connected 2023-03-27 21:55:08,990 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 21:55:09,014 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 21:55:09,039 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 21:55:09,075 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 21:55:09,080 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 21:55:09,081 [printer.py:reinit()] - # Extruders: 1 2023-03-27 21:55:09,082 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 21:55:09,082 [printer.py:reinit()] - # Fans: 2 2023-03-27 21:55:09,082 [printer.py:reinit()] - # Output pins: 0 2023-03-27 21:55:09,083 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 21:55:09,350 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 21:55:09,352 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-27 21:55:09,352 [printer.py:change_state()] - Adding callback for state: startup 2023-03-27 21:55:09,388 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 21:55:09,396 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 21:55:09,412 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 21:55:09,412 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 21:55:09,413 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 21:55:09,413 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 21:55:09,414 [screen.py:init_printer()] - Printer initialized 2023-03-27 21:55:10,346 [printer.py:change_state()] - Changing state from 'startup' to 'ready' 2023-03-27 21:55:10,347 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 21:55:10,358 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 21:55:10,490 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 21:55:10,498 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 21:55:10,508 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 21:55:10,517 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 21:55:12,025 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 21:55:12,043 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 21:55:12,066 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 21:55:12,067 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 21:55:24,119 [printer.py:change_state()] - Changing state from 'ready' to 'printing' 2023-03-27 21:55:24,119 [printer.py:change_state()] - Adding callback for state: printing 2023-03-27 21:55:24,327 [screen.py:attach_panel()] - Current panel hierarchy: job_status 2023-03-27 21:55:24,328 [job_status.py:set_state()] - Changing job_status state from 'standby' to 'printing' 2023-03-27 21:55:24,341 [job_status.py:activate()] - Changing filename: 'None' to 'camera_case_back_v0.4-2.gcode' 2023-03-27 21:55:24,342 [job_status.py:update_file_metadata()] - Update Metadata. File: camera_case_back_v0.4-2.gcode Size: 420533 2023-03-27 21:55:24,343 [job_status.py:show_file_thumbnail()] - camera_case_back_v0.4-2.gcode 2023-03-27 21:55:24,344 [job_status.py:show_file_thumbnail()] - no pixbuf 2023-03-27 21:58:23,418 [job_status.py:set_state()] - Changing job_status state from 'printing' to 'cancelled' 2023-03-27 21:58:26,906 [printer.py:change_state()] - Changing state from 'printing' to 'ready' 2023-03-27 21:58:26,906 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 21:59:48,634 [KlippyGtk.py:remove_dialog()] - Cannot remove dialog 2023-03-27 21:59:48,677 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-27 21:59:57,756 [printer.py:change_state()] - Changing state from 'ready' to 'disconnected' 2023-03-27 21:59:57,757 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-27 21:59:57,758 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-27 21:59:57,768 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-27 21:59:57,782 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 21:59:57,810 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 21:59:57,831 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 21:59:57,831 [screen.py:init_printer()] - Klipper not connected 2023-03-27 22:00:00,996 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 22:00:01,025 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 22:00:01,054 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 22:00:01,082 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 22:00:01,085 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 22:00:01,085 [printer.py:reinit()] - # Extruders: 1 2023-03-27 22:00:01,086 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 22:00:01,086 [printer.py:reinit()] - # Fans: 2 2023-03-27 22:00:01,086 [printer.py:reinit()] - # Output pins: 0 2023-03-27 22:00:01,086 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 22:00:01,363 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 22:00:01,366 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-27 22:00:01,366 [printer.py:change_state()] - Adding callback for state: startup 2023-03-27 22:00:01,406 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 22:00:01,415 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 22:00:01,430 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 22:00:01,431 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 22:00:01,432 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 22:00:01,432 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 22:00:01,434 [screen.py:init_printer()] - Printer initialized 2023-03-27 22:00:02,150 [printer.py:change_state()] - Changing state from 'startup' to 'ready' 2023-03-27 22:00:02,150 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 22:00:02,160 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-27 22:00:02,267 [main_menu.py:add_device()] - Adding device: extruder 2023-03-27 22:00:02,276 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-27 22:00:02,286 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-27 22:00:02,295 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-27 22:00:04,035 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 22:00:04,055 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-27 22:00:04,079 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 22:00:04,080 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 22:00:17,137 [printer.py:change_state()] - Changing state from 'ready' to 'printing' 2023-03-27 22:00:17,138 [printer.py:change_state()] - Adding callback for state: printing 2023-03-27 22:00:17,333 [screen.py:attach_panel()] - Current panel hierarchy: job_status 2023-03-27 22:00:17,335 [job_status.py:set_state()] - Changing job_status state from 'standby' to 'printing' 2023-03-27 22:00:17,348 [job_status.py:activate()] - Changing filename: 'None' to 'camera_case_back_v0.4-2.gcode' 2023-03-27 22:00:17,349 [job_status.py:update_file_metadata()] - Update Metadata. File: camera_case_back_v0.4-2.gcode Size: 420533 2023-03-27 22:00:17,350 [job_status.py:show_file_thumbnail()] - camera_case_back_v0.4-2.gcode 2023-03-27 22:00:17,350 [job_status.py:show_file_thumbnail()] - no pixbuf 2023-03-27 22:03:21,458 [job_status.py:set_state()] - Changing job_status state from 'printing' to 'cancelled' 2023-03-27 22:03:25,206 [printer.py:change_state()] - Changing state from 'printing' to 'ready' 2023-03-27 22:03:25,206 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 22:03:54,569 [job_status.py:set_state()] - Changing job_status state from 'cancelled' to 'standby' 2023-03-27 22:06:30,085 [printer.py:change_state()] - Changing state from 'ready' to 'printing' 2023-03-27 22:06:30,086 [printer.py:change_state()] - Adding callback for state: printing 2023-03-27 22:06:30,095 [job_status.py:set_state()] - Changing job_status state from 'standby' to 'printing' 2023-03-27 22:06:30,106 [job_status.py:update_file_metadata()] - Update Metadata. File: camera_case_back_v0.4-2.gcode Size: 420533 2023-03-27 22:06:30,107 [job_status.py:show_file_thumbnail()] - camera_case_back_v0.4-2.gcode 2023-03-27 22:06:30,108 [job_status.py:show_file_thumbnail()] - no pixbuf 2023-03-27 22:37:30,007 [job_status.py:set_state()] - Changing job_status state from 'printing' to 'complete' 2023-03-27 22:37:32,496 [printer.py:change_state()] - Changing state from 'printing' to 'ready' 2023-03-27 22:37:32,496 [printer.py:change_state()] - Adding callback for state: ready 2023-03-27 22:53:01,968 [screen.py:show_screensaver()] - Showing Screensaver --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-27 23:17:47,196 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-27 23:17:47,456 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-27 23:17:47,457 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-27 23:17:47,488 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-27 23:17:47,491 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-27 23:17:47,493 [config.py:__init__()] - Configuration validated succesfuly 2023-03-27 23:17:47,497 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-27 23:17:47,625 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-27 23:17:47,626 [config.py:install_language()] - Using system lang 2023-03-27 23:17:47,627 [config.py:install_language()] - Using lang en 2023-03-27 23:17:47,636 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-27 23:17:47,637 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-27 23:17:48,540 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-27 23:17:48,550 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-27 23:17:48,565 [screen.py:initial_connection()] - Default printer: None 2023-03-27 23:17:48,565 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-27 23:17:48,567 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-27 23:17:48,567 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-27 23:17:48,636 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-27 23:17:48,669 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 23:17:48,683 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-27 23:17:48,684 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-27 23:17:48,695 [_logging.py:info()] - Websocket connected 2023-03-27 23:17:48,696 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-27 23:17:48,725 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-27 23:17:48,755 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-27 23:17:48,770 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-27 23:17:48,790 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-27 23:17:48,793 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-27 23:17:48,793 [printer.py:reinit()] - # Extruders: 1 2023-03-27 23:17:48,793 [printer.py:reinit()] - # Temperature devices: 2 2023-03-27 23:17:48,794 [printer.py:reinit()] - # Fans: 2 2023-03-27 23:17:48,794 [printer.py:reinit()] - # Output pins: 0 2023-03-27 23:17:48,795 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-27 23:17:49,072 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-27 23:17:49,074 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-27 23:17:49,075 [printer.py:change_state()] - Adding callback for state: startup 2023-03-27 23:17:49,109 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-27 23:17:49,110 [printer.py:init_temp_store()] - Temp store: [] 2023-03-27 23:17:49,133 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-27 23:17:49,134 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-27 23:17:49,135 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-27 23:17:49,135 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-27 23:17:49,136 [screen.py:init_printer()] - Printer initialized 2023-03-28 08:42:10,301 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 08:42:10,301 [printer.py:init_temp_store()] - Temp store: [] 2023-03-28 08:42:10,320 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 08:42:10,321 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-28 08:43:45,354 [printer.py:change_state()] - Changing state from 'startup' to 'disconnected' 2023-03-28 08:43:45,355 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-28 08:43:45,358 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-28 08:43:45,374 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-28 08:43:45,402 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 08:43:45,416 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-28 08:43:45,417 [screen.py:init_printer()] - Klipper not connected 2023-03-28 08:43:48,310 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 08:43:48,335 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-28 08:43:48,355 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-28 08:43:48,384 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-28 08:43:48,388 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-28 08:43:48,388 [printer.py:reinit()] - # Extruders: 1 2023-03-28 08:43:48,388 [printer.py:reinit()] - # Temperature devices: 2 2023-03-28 08:43:48,388 [printer.py:reinit()] - # Fans: 2 2023-03-28 08:43:48,389 [printer.py:reinit()] - # Output pins: 0 2023-03-28 08:43:48,390 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-28 08:43:48,669 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-28 08:43:48,672 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-28 08:43:48,672 [printer.py:change_state()] - Adding callback for state: startup 2023-03-28 08:43:48,728 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 08:43:48,729 [printer.py:init_temp_store()] - Temp store: [] 2023-03-28 08:43:48,751 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 08:43:48,752 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-28 08:43:48,753 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-28 08:43:48,754 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-28 08:43:48,755 [screen.py:init_printer()] - Printer initialized 2023-03-28 08:43:49,670 [printer.py:change_state()] - Changing state from 'startup' to 'ready' 2023-03-28 08:43:49,671 [printer.py:change_state()] - Adding callback for state: ready 2023-03-28 08:43:49,679 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-28 08:43:49,680 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-28 08:43:49,702 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-28 08:43:49,816 [main_menu.py:add_device()] - Adding device: extruder 2023-03-28 08:43:49,829 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-28 08:43:49,840 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-28 08:43:49,850 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-28 08:43:49,853 [base_panel.py:show_heaters()] - Couldn't create heaters box: 'heater_bed_box' 2023-03-28 08:43:49,865 [base_panel.py:show_heaters()] - Couldn't create heaters box: 'heater_bed_box' 2023-03-28 08:43:51,307 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 08:43:51,354 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-28 08:43:51,378 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 08:43:51,379 [screen.py:init_tempstore()] - Temperature store size: 1200 --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-28 08:44:15,285 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-28 08:44:15,875 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-28 08:44:15,876 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-28 08:44:15,991 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-28 08:44:15,994 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-28 08:44:15,997 [config.py:__init__()] - Configuration validated succesfuly 2023-03-28 08:44:16,002 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-28 08:44:16,144 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-28 08:44:16,145 [config.py:install_language()] - Using system lang 2023-03-28 08:44:16,147 [config.py:install_language()] - Using lang en 2023-03-28 08:44:16,161 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-28 08:44:16,163 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-28 08:46:33,048 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-28 08:46:33,060 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-28 08:46:33,078 [screen.py:initial_connection()] - Default printer: None 2023-03-28 08:46:33,079 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-28 08:46:33,079 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-28 08:46:33,080 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-28 08:46:33,177 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-28 08:46:33,234 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 08:46:33,255 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-28 08:46:33,256 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-28 08:46:33,274 [_logging.py:info()] - Websocket connected 2023-03-28 08:46:33,275 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-28 08:46:33,421 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 08:46:33,455 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-28 08:46:33,473 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-28 08:46:33,700 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-28 08:46:33,703 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-28 08:46:33,704 [printer.py:reinit()] - # Extruders: 1 2023-03-28 08:46:33,704 [printer.py:reinit()] - # Temperature devices: 2 2023-03-28 08:46:33,704 [printer.py:reinit()] - # Fans: 2 2023-03-28 08:46:33,704 [printer.py:reinit()] - # Output pins: 0 2023-03-28 08:46:33,705 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-28 08:46:33,985 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-28 08:46:33,987 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-28 08:46:33,987 [printer.py:change_state()] - Adding callback for state: ready 2023-03-28 08:46:34,019 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 08:46:34,045 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-28 08:46:34,064 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 08:46:34,065 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-28 08:46:34,066 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-28 08:46:34,066 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-28 08:46:34,070 [screen.py:init_printer()] - Printer initialized 2023-03-28 08:46:34,077 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-28 08:46:34,077 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-28 08:46:34,094 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-28 08:46:34,192 [main_menu.py:add_device()] - Adding device: extruder 2023-03-28 08:46:34,203 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-28 08:46:34,215 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-28 08:46:34,225 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-28 08:46:36,158 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 08:46:36,184 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-28 08:46:36,201 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 08:46:36,202 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-28 09:06:45,221 [heatergraph.py:event_cb()] - Graph area: 315.9939270019531 38.99505615234375 --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-28 09:07:58,610 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-28 09:07:58,940 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-28 09:07:58,941 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-28 09:07:58,973 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-28 09:07:58,975 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-28 09:07:58,978 [config.py:__init__()] - Configuration validated succesfuly 2023-03-28 09:07:58,980 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-28 09:07:59,128 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-28 09:07:59,128 [config.py:install_language()] - Using system lang 2023-03-28 09:07:59,130 [config.py:install_language()] - Using lang en 2023-03-28 09:07:59,144 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-28 09:07:59,147 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-28 09:08:00,337 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-28 09:08:00,351 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-28 09:08:00,372 [screen.py:initial_connection()] - Default printer: None 2023-03-28 09:08:00,373 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-28 09:08:00,374 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-28 09:08:00,375 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-28 09:08:00,477 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-28 09:08:00,531 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 09:08:00,551 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-28 09:08:00,552 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-28 09:08:00,570 [_logging.py:info()] - Websocket connected 2023-03-28 09:08:00,570 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-28 09:08:00,736 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 09:08:00,773 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-28 09:08:00,795 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-28 09:08:00,870 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-28 09:08:00,873 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-28 09:08:00,874 [printer.py:reinit()] - # Extruders: 1 2023-03-28 09:08:00,874 [printer.py:reinit()] - # Temperature devices: 2 2023-03-28 09:08:00,875 [printer.py:reinit()] - # Fans: 2 2023-03-28 09:08:00,875 [printer.py:reinit()] - # Output pins: 0 2023-03-28 09:08:00,876 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-28 09:08:01,160 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-28 09:08:01,163 [printer.py:change_state()] - Changing state from 'disconnected' to 'ready' 2023-03-28 09:08:01,163 [printer.py:change_state()] - Adding callback for state: ready 2023-03-28 09:08:01,181 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 09:08:01,209 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-28 09:08:01,226 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 09:08:01,227 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-28 09:08:01,228 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-28 09:08:01,228 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-28 09:08:01,229 [screen.py:init_printer()] - Printer initialized 2023-03-28 09:08:01,236 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-28 09:08:01,236 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-28 09:08:01,255 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-28 09:08:01,354 [main_menu.py:add_device()] - Adding device: extruder 2023-03-28 09:08:01,366 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-28 09:08:01,378 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-28 09:08:01,388 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-28 09:08:04,388 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 09:08:04,423 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-28 09:08:04,451 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 09:08:04,452 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-28 09:08:40,744 [printer.py:change_state()] - Changing state from 'ready' to 'printing' 2023-03-28 09:08:40,744 [printer.py:change_state()] - Adding callback for state: printing 2023-03-28 09:08:40,788 [screen.py:_load_panel()] - Loading panel: job_status 2023-03-28 09:08:40,788 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/job_status.py 2023-03-28 09:08:41,005 [screen.py:attach_panel()] - Current panel hierarchy: job_status 2023-03-28 09:08:41,006 [job_status.py:set_state()] - Changing job_status state from 'standby' to 'printing' 2023-03-28 09:08:41,030 [job_status.py:activate()] - Changing filename: 'None' to 'camera_case_back_v0.4-2.gcode' 2023-03-28 09:08:41,031 [job_status.py:update_file_metadata()] - Update Metadata. File: camera_case_back_v0.4-2.gcode Size: 420533 2023-03-28 09:08:41,032 [job_status.py:show_file_thumbnail()] - camera_case_back_v0.4-2.gcode 2023-03-28 09:08:41,033 [job_status.py:show_file_thumbnail()] - no pixbuf 2023-03-28 09:10:56,234 [KlippyWebsocket.py:print_pause()] - Sending printer.print.pause 2023-03-28 09:11:16,960 [printer.py:change_state()] - Changing state from 'printing' to 'paused' 2023-03-28 09:11:16,961 [printer.py:change_state()] - Adding callback for state: paused 2023-03-28 09:11:16,974 [job_status.py:set_state()] - Changing job_status state from 'printing' to 'paused' 2023-03-28 09:15:06,244 [printer.py:change_state()] - Changing state from 'paused' to 'printing' 2023-03-28 09:15:06,245 [printer.py:change_state()] - Adding callback for state: printing 2023-03-28 09:15:06,246 [job_status.py:set_state()] - Changing job_status state from 'paused' to 'printing' 2023-03-28 09:15:06,258 [job_status.py:update_file_metadata()] - Update Metadata. File: camera_case_back_v0.4-2.gcode Size: 420533 2023-03-28 09:15:06,260 [job_status.py:show_file_thumbnail()] - camera_case_back_v0.4-2.gcode 2023-03-28 09:15:06,260 [job_status.py:show_file_thumbnail()] - no pixbuf 2023-03-28 09:45:42,143 [job_status.py:set_state()] - Changing job_status state from 'printing' to 'complete' 2023-03-28 09:45:44,634 [printer.py:change_state()] - Changing state from 'printing' to 'ready' 2023-03-28 09:45:44,634 [printer.py:change_state()] - Adding callback for state: ready 2023-03-28 10:11:52,971 [screen.py:show_screensaver()] - Showing Screensaver 2023-03-28 11:36:55,206 [screen.py:close_screensaver()] - Closing Screensaver 2023-03-28 11:36:55,242 [screen.py:wake_screen()] - Screen wake up --------------------KlipperScreen Log Start-------------------- Git Version: v0.3.2-20-ga1c602b 2023-03-28 13:06:34,935 [screen.py:main()] - KlipperScreen version: v0.3.2-20-ga1c602b 2023-03-28 13:06:35,193 [config.py:get_config_file_location()] - Passed config (-c): /home/pi/KlipperScreen.conf 2023-03-28 13:06:35,194 [config.py:__init__()] - Config path location: /home/pi/printer_data/config/KlipperScreen.conf 2023-03-28 13:06:35,215 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-28 13:06:35,217 [config.py:__init__()] - ====== Saved Def ====== [displayed_macros Printer] g29 = False g27 = False m600 = False m702 = False pause_park = False ======================= 2023-03-28 13:06:35,219 [config.py:__init__()] - Configuration validated succesfuly 2023-03-28 13:06:35,220 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-28 13:06:35,372 [config.py:create_translations()] - Selected lang: None OS lang: en_GB 2023-03-28 13:06:35,373 [config.py:install_language()] - Using system lang 2023-03-28 13:06:35,374 [config.py:install_language()] - Using lang en 2023-03-28 13:06:35,383 [screen.py:__init__()] - Screen resolution: 800x480 2023-03-28 13:06:35,385 [KlippyGtk.py:__init__()] - Font size: 16.6 (medium) 2023-03-28 13:06:36,259 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-28 13:06:36,270 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-28 13:06:36,285 [screen.py:initial_connection()] - Default printer: None 2023-03-28 13:06:36,285 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-28 13:06:36,286 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-28 13:06:36,286 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/splash_screen.py 2023-03-28 13:06:36,356 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-28 13:06:36,390 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 13:06:36,404 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-28 13:06:36,404 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-28 13:06:36,415 [_logging.py:info()] - Websocket connected 2023-03-28 13:06:36,415 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-28 13:06:36,445 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 13:06:36,476 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-28 13:06:36,491 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-28 13:06:36,511 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-28 13:06:36,514 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-28 13:06:36,514 [printer.py:reinit()] - # Extruders: 1 2023-03-28 13:06:36,515 [printer.py:reinit()] - # Temperature devices: 2 2023-03-28 13:06:36,515 [printer.py:reinit()] - # Fans: 2 2023-03-28 13:06:36,515 [printer.py:reinit()] - # Output pins: 0 2023-03-28 13:06:36,515 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-28 13:06:36,797 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-28 13:06:36,800 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-28 13:06:36,801 [printer.py:change_state()] - Adding callback for state: startup 2023-03-28 13:06:36,845 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 13:06:36,845 [printer.py:init_temp_store()] - Temp store: [] 2023-03-28 13:06:36,862 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 13:06:36,863 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-28 13:06:36,863 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-28 13:06:36,863 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-28 13:06:36,864 [screen.py:init_printer()] - Printer initialized 2023-03-28 13:06:39,424 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 13:06:39,425 [printer.py:init_temp_store()] - Temp store: [] 2023-03-28 13:06:39,453 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 13:06:39,454 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-28 13:21:44,718 [printer.py:change_state()] - Changing state from 'startup' to 'disconnected' 2023-03-28 13:21:44,719 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-28 13:21:44,720 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-28 13:21:44,731 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-28 13:21:44,760 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 13:21:44,784 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-28 13:21:44,785 [screen.py:init_printer()] - Klipper not connected 2023-03-28 13:21:48,427 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 13:21:48,450 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-28 13:21:48,470 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-28 13:21:48,498 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-28 13:21:48,501 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-28 13:21:48,501 [printer.py:reinit()] - # Extruders: 1 2023-03-28 13:21:48,502 [printer.py:reinit()] - # Temperature devices: 2 2023-03-28 13:21:48,502 [printer.py:reinit()] - # Fans: 2 2023-03-28 13:21:48,502 [printer.py:reinit()] - # Output pins: 0 2023-03-28 13:21:48,503 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-28 13:21:48,775 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-28 13:21:48,777 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-28 13:21:48,778 [printer.py:change_state()] - Adding callback for state: startup 2023-03-28 13:21:48,799 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 13:21:48,800 [printer.py:init_temp_store()] - Temp store: [] 2023-03-28 13:21:48,814 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 13:21:48,815 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-28 13:21:48,816 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-28 13:21:48,816 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-28 13:21:48,817 [screen.py:init_printer()] - Printer initialized 2023-03-28 13:21:51,426 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 13:21:51,427 [printer.py:init_temp_store()] - Temp store: [] 2023-03-28 13:21:51,459 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 13:21:51,461 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-28 13:21:52,053 [printer.py:change_state()] - Changing state from 'startup' to 'disconnected' 2023-03-28 13:21:52,053 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-28 13:21:52,056 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-28 13:21:52,071 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-28 13:21:52,103 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 13:21:52,131 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-28 13:21:52,132 [screen.py:init_printer()] - Klipper not connected 2023-03-28 13:21:55,427 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 13:21:55,454 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-28 13:21:55,483 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-28 13:21:55,512 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-28 13:21:55,514 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-28 13:21:55,515 [printer.py:reinit()] - # Extruders: 1 2023-03-28 13:21:55,515 [printer.py:reinit()] - # Temperature devices: 2 2023-03-28 13:21:55,515 [printer.py:reinit()] - # Fans: 2 2023-03-28 13:21:55,515 [printer.py:reinit()] - # Output pins: 0 2023-03-28 13:21:55,516 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-28 13:21:55,792 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-28 13:21:55,794 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-28 13:21:55,794 [printer.py:change_state()] - Adding callback for state: startup 2023-03-28 13:21:55,816 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 13:21:55,817 [printer.py:init_temp_store()] - Temp store: [] 2023-03-28 13:21:55,831 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 13:21:55,832 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-28 13:21:55,833 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-28 13:21:55,833 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-28 13:21:55,834 [screen.py:init_printer()] - Printer initialized 2023-03-28 13:21:58,426 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 13:21:58,427 [printer.py:init_temp_store()] - Temp store: [] 2023-03-28 13:21:58,455 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 13:21:58,457 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-28 13:23:09,540 [printer.py:change_state()] - Changing state from 'startup' to 'disconnected' 2023-03-28 13:23:09,541 [printer.py:change_state()] - Adding callback for state: disconnected 2023-03-28 13:23:09,543 [screen.py:state_disconnected()] - ### Going to disconnected 2023-03-28 13:23:09,556 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-28 13:23:09,588 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 13:23:09,617 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-28 13:23:09,618 [screen.py:init_printer()] - Klipper not connected 2023-03-28 13:23:12,421 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-28 13:23:12,443 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-28 13:23:12,466 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-28 13:23:12,494 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-28 13:23:12,497 [printer.py:reinit()] - Klipper version: v0.11.0-143-gc54d83c9 2023-03-28 13:23:12,497 [printer.py:reinit()] - # Extruders: 1 2023-03-28 13:23:12,497 [printer.py:reinit()] - # Temperature devices: 2 2023-03-28 13:23:12,498 [printer.py:reinit()] - # Fans: 2 2023-03-28 13:23:12,498 [printer.py:reinit()] - # Output pins: 0 2023-03-28 13:23:12,499 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-28 13:23:12,781 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&temperature_sensor Raspberry_Pi&fan&heater_fan hotend_fan&filament_switch_sensor RunoutSensor 2023-03-28 13:23:12,785 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-28 13:23:12,786 [printer.py:change_state()] - Adding callback for state: startup 2023-03-28 13:23:12,837 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 13:23:12,838 [printer.py:init_temp_store()] - Temp store: [] 2023-03-28 13:23:12,861 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 13:23:12,863 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-28 13:23:12,864 [files.py:initialize()] - Gcodes path: /home/pi/printer_data/gcodes 2023-03-28 13:23:12,864 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-28 13:23:12,865 [screen.py:init_printer()] - Printer initialized 2023-03-28 13:23:13,767 [printer.py:change_state()] - Changing state from 'startup' to 'ready' 2023-03-28 13:23:13,767 [printer.py:change_state()] - Adding callback for state: ready 2023-03-28 13:23:13,774 [screen.py:_load_panel()] - Loading panel: main_menu 2023-03-28 13:23:13,775 [screen.py:_load_panel()] - Panel path: /home/pi/KlipperScreen/panels/main_menu.py 2023-03-28 13:23:13,798 [main_menu.py:initialize()] - ### Making MainMenu 2023-03-28 13:23:13,914 [main_menu.py:add_device()] - Adding device: extruder 2023-03-28 13:23:13,923 [main_menu.py:add_device()] - Adding device: heater_bed 2023-03-28 13:23:13,936 [main_menu.py:add_device()] - Adding device: temperature_sensor Raspberry_Pi 2023-03-28 13:23:13,947 [screen.py:attach_panel()] - Current panel hierarchy: main_panel 2023-03-28 13:23:13,950 [base_panel.py:show_heaters()] - Couldn't create heaters box: 'heater_bed_box' 2023-03-28 13:23:13,962 [base_panel.py:show_heaters()] - Couldn't create heaters box: 'heater_bed_box' 2023-03-28 13:23:15,424 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-28 13:23:15,470 [printer.py:init_temp_store()] - Temp store: ['heater_bed', 'temperature_sensor Raspberry_Pi', 'extruder'] 2023-03-28 13:23:15,493 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-28 13:23:15,494 [screen.py:init_tempstore()] - Temperature store size: 1200